- 03 3月, 2010 8 次提交
-
-
由 Mark Brown 提交于
Regulators may sometimes take longer to enable than the control operation used to do so, either because the regulator has ramp rate control used to limit inrush current or because the control operation is very fast (GPIO being the most common example of this). In order to ensure that consumers do not rely on the regulator before it is enabled provide an enable_time() operation and have the core delay for that time before returning to the caller. This is implemented as a function since the ramp rate may be specified in voltage per unit time and therefore the time depend on the configuration. In future it would be desirable to allow the bulk operations to run the delays for multiple enables in parallel but this is not currently supported. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The intended use case is for drivers which disable regulators to save power but need to do some work to restore the hardware state when restarting. If the supplies are not actually disabled due to board limits or sharing with other active devices this notifier allows the driver to avoid unneeded reinitialisation, particularly when used with runtime PM. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Alberto Panizzo 提交于
This patch, complete the mc13783 regulator subsystem driver with voltage selecting capability. Main Switches (SW1AB, SW2AB) are not supported yet. version 2 diffs: - delete the "Switchers PLL" enable and multiplication factor value selecting capability because it is not a voltage or current regulator. This will be a part of Main switcher supporting task. - Correct many coding style problems pointed me out. Signed-off-by: NAlberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (49 commits) OMAP: DSS2: Taal: Fix TE when resuming OMAP: DSS2: Taal: Fix ESD check OMAP: DSS2: OMAPFB: Constify some function parameters OMAP: DSS2: OMAPFB: install omapfb.h OMAP: DSS2: DSI: add error prints OMAP: DSS2: TPO-TD03MTEA1: fix function names OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE OMAP: DSS2: DSI: remove external TE support OMAP: DSS2: move timing functions OMAP: DSS2: move set/get_wss() OMAP: DSS2: move enable/disable/suspend/resume OMAP: DSS2: move update() and sync() OMAP: DSS2: move set/get_update_mode() OMAP: DSS2: move enable/get_te() OMAP: DSS2: move get_recommended_bpp() OMAP: DSS2: move get_resolution() OMAP: DSS2: move enable/disable_channel to overlay manager OMAP: DSS2: move wait_vsync() OMAP: DSS2: move get/set_rotate() ...
-
由 Linus Torvalds 提交于
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (214 commits) omap2: Initialize Menelaus and MMC for N8X0 AM3517 EVM: correct typo - tca6416 mispelt as tca6516 AM3517 EVM: Enable I2C support AM35x: Enable OMAP_MUX in defconfig AM35x: Add missing GPIO mux config for EHCI port Zoom3: Defconfig update omap: i2c: Fix muxing for command line enabled bus OMAP4: clock: Remove clock hacks from timer-gp.c OMAP4: clock: Add dummy clock nodes for interface clocks OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck OMAP2+ clock: revise omap2_clk_{disable,enable}() OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code OMAP clockdomain: if no autodeps exist, don't try to add or remove them OMAP hwmod: add hwmod class support OMAP hwmod: convert header files with static allocations into C files OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630 OMAP4 clock: drop the ALWAYS_ENABLED clock flag OMAP clock: drop RATE_FIXED clock flag ...
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "blkdev: fix merge_bvec_fn return value checks"
-
由 Jens Axboe 提交于
This reverts commit 9f7cdbc3. It's causing oopses om dm setups, so revert it until we investigate. Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 02 3月, 2010 32 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: sparc: Support show_unhandled_signals. sparc: use __ratelimit sunxvr500: Additional PCI id for sunxvr500 driver sparc: use asm-generic/scatterlist.h sparc64: If 'slot-names' property exist, create sysfs PCI slot information. sparc: remove trailing space in messages sparc: remove redundant return statements
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1341 commits) virtio_net: remove forgotten assignment be2net: fix tx completion polling sis190: fix cable detect via link status poll net: fix protocol sk_buff field bridge: Fix build error when IGMP_SNOOPING is not enabled bnx2x: Tx barriers and locks scm: Only support SCM_RIGHTS on unix domain sockets. vhost-net: restart tx poll on sk_sndbuf full vhost: fix get_user_pages_fast error handling vhost: initialize log eventfd context pointer vhost: logging thinko fix wireless: convert to use netdev_for_each_mc_addr ethtool: do not set some flags, if others failed ipoib: returned back addrlen check for mc addresses netlink: Adding inode field to /proc/net/netlink axnet_cs: add new id bridge: Make IGMP snooping depend upon BRIDGE. bridge: Add multicast count/interval sysfs entries bridge: Add hash elasticity/max sysfs entries bridge: Add multicast_snooping sysfs toggle ... Trivial conflicts in Documentation/feature-removal-schedule.txt
-
由 Tomi Valkeinen 提交于
TE was not initialized properly on power on, which broke TE when resuming from suspend. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Jiri Pirko 提交于
This is no longer needed. I missed to remove this in 567ec874 ("net: convert multiple drivers to use netdev_for_each_mc_addr, part6") Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
In tx/mcc polling, napi_complete() is being incorrectly called before reaping tx completions. This can cause tx compl processing to be scheduled on another cpu concurrently which can result in a panic. This if fixed by calling napi complete() after tx/mcc compl processing but before re-enabling interrupts (via a cq notify). Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Some sis190 devices don't report LinkChange, so do polling for link status. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11926Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit e992cd9b (kmemcheck: make bitfield annotations truly no-ops when disabled) allows us to revert a workaround we did in the past to not add holes in sk_buff structure. This patch partially reverts commit 14d18a81 (net: fix kmemcheck annotations) so that sparse doesnt complain: include/linux/skbuff.h:357:41: error: invalid bitfield specifier for type restricted __be16. Reported-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
Conflicts: arch/arm/plat-omap/Kconfig
-
由 Linus Torvalds 提交于
Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (40 commits) DaVinci DM365: Adding support for SPI EEPROM DaVinci DM365: Adding DM365 SPI support DaVinci DM355: Modifications to DM355 SPI support DaVinci: SPI: Adding header file for SPI support. davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table() DaVinci: DM365: Voice codec support for the DM365 SoC davinci: clock: let clk->set_rate function sleep Add SDA and SCL pin numbers to i2c platform data davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138 davinci: build list of unused EDMA events dynamically davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case davinci: Keep count of channel controllers on a platform davinci: Correct return value of edma_alloc_channel api davinci: add CDCE949 support on DM6467 EVM davinci: add support for CDCE949 clock synthesizer davinci: da850/omap-l138 EVM: register for suspend support davinci: da850/omap-l138: add support for SoC suspend davinci: add power management support DaVinci: DM365: Changing default queue for DM365. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (38 commits) sata_via: Delay on vt6420 when starting ATAPI DMA write ata: Detect Delkin Devices compact flash pata_efar: Enable parallel scanning pata_atiixp: enable parallel scan [libata] pata_atiixp: add locking for parallel scanning [libata] pata_efar: add locking for parallel scanning libata: Pass host flags into the pci helper [libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI libata: Allow pata_legacy to be built on non-ISA but PCI systems pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards [libata] pata_at91: fix backslash-continued string pata_via: store UDMA masks in via_isa_bridges table pata_via: fix address setup timings underlocking pata_serverworks: fix error message pata_serverworks: fix PIO setup for the second channel pata_efar: fix secondary port support pata_cypress: fix PIO timings underclocking pata_cs5535: use correct values for PIO1 and PIO2 data timings pata_cmd64x: remove unused definitions ...
-
由 Bart Hartgers 提交于
When writing a disc on certain lite-on dvd-writers (also rebadged as optiarc/LG/...) connected to a vt6420, the ATAPI CDB ends up in the datastream and on the disc, causing silent corruption. Delaying between sending the CDB and starting DMA seems to prevent this. I do not know if there are burners that do not suffer from this, but the patch should be safe for those as well. There are many reports of this issue, but AFAICT no solution was found before. For example: http://lkml.indiana.edu/hypermail/linux/kernel/0802.3/0561.htmlSigned-off-by: NBart Hartgers <bart.hartgers@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Gardner 提交于
I have a Delkin Devices compact flash card that isn't being recognized using the SATA/PATA drivers. The card is recognized and works with the deprecated ATA drivers. The error I am seeing is: ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) I tracked it down to ata_id_is_cfa() in include/linux/ata.h. The Delkin card has id[0] set to 0x844a and id[83] set to 0. This isn't what the kernel expects and is probably incorrect. The simplest work-around is to add a check for 0x844a to ata_id_is_cfa(). Signed-off-by: NBen Gardner <gardner.ben@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alan Cox 提交于
Again originally proposed by Bartlomiej but this does it by using the generic helper logic instead. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alan Cox 提交于
This was originally proposed by Bartlomiej but as a device specific expansion of the init_one function rather than making the helper more generic. Enable the parallel scan via the generic flags. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
This is similar change as commit 60c3be38 for ata_piix host driver and while pata_atiixp doesn't enable parallel scan yet the race could probably also be triggered by requesting re-scanning of both ports at the same time using SCSI sysfs interface. [Ported to current tree without other patch dependancies by Alan Cox] Original is Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> This one is Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
Add clearing of UDMA enable bit also for PIO modes and then add extra locking for parallel scanning. This is similar change as commit 60c3be38 for ata_piix host driver and while pata_efar doesn't enable parallel scan yet the race could probably also be triggered by requesting re-scanning of both ports at the same time using SCSI sysfs interface. [Ported to current kernel without other patch dependancies by Alan Cox] Original is Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> This one is Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alan Cox 提交于
This allows parallel scan and the like to be set without having to stop using the existing full helper functions. This patch merely adds the argument and fixes up the callers. It doesn't undo the special cases already in the tree or add any new parallel callers. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Christoph Egger 提交于
The marvell driver comtains a fallback to ahci for the sata ports which is incorrectly checked as CONFIG_AHCI while the only AHCI config item is actually called SATA_AHCI (which also sounds sensible considering it's a fallback for the sata ports). Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alan Cox 提交于
This is needed for some unsupported hardware setups on strange 64bit mainboards where crazy stuff has been done like putting flash ata adapters on the LPC bus, or where the real hardware is hidden/confused. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
PDC2026x chipsets need the same treatment as PDC20246 one. This is completely untested but will hopefully fix UDMA issues that people have been reporting against pata_pdc202xx_old for the last couple of years. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
On Monday 04 January 2010 02:30:24 pm Russell King wrote: > Found the problem - getting rid of the read of the alt status register > after the command has been written fixes the UDMA CRC errors on write: > > @@ -676,7 +676,8 @@ void ata_sff_exec_command(struct ata_port *ap, const struct > ata_taskfile *tf) > DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); > > iowrite8(tf->command, ap->ioaddr.command_addr); > - ata_sff_pause(ap); > + ndelay(400); > +// ata_sff_pause(ap); > } > EXPORT_SYMBOL_GPL(ata_sff_exec_command); > > > This rather makes sense. The PDC20247 handles the UDMA part of the > protocol. It has no way to tell the PDC20246 to wait while it suspends > UDMA, so that a normal register access can take place - the 246 ploughs > on with the register access without any regard to the state of the 247. > > If the drive immediately starts the UDMA protocol after a write to the > command register (as it probably will for the DMA WRITE command), then > we'll be accessing the taskfile in the middle of the UDMA setup, which > can't be good. It's certainly a violation of the ATA specs. Fix it by adding custom ->sff_exec_command method for UDMA33 chipsets. Debugged-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Noticed and rough patch by Joe Perches. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
* store UDMA masks in via_isa_bridges[] and while at it make "flags" field to be u8 instead of u16 * convert the driver to use UDMA masks from via_isa_bridges[] * remove no longer needed VIA_UDMA* defines Make some minor documentation and CodingStyle fixes while at it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
Correct via_do_set_mode() documentation while at it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
Timing registers should be programmed with the desired number of clocks minus one clock. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
There shouldn't be any problems with it as IDE cs5535 host driver has been using those values for years and they match values given in the (publicly available) datasheet. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
s/ARTIM2/ARTTIM23/ in cmd648_bmdma_stop() while at it Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
Clear the primary channel pending interrupt bit instead of the reserved one. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-