Move the fallback arch_vma_name() to a sensible place (kernel/signal.c).

Currently it's in fs/proc/task_mmu.c, a file that is dependent on both
CONFIG_PROC_FS and CONFIG_MMU being enabled, but it's used from
kernel/signal.c from where it is called unconditionally.

[akpm@osdl.org: build fix]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement /proc/pid/maps for NOMMU by reading the vm_area_list attached to
current->mm->context.vmlist.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set the backing device info capabilities for /dev/mem and /dev/kmem to
permit direct sharing under no-MMU conditions and full mapping capabilities
under MMU conditions.  Make the BDI used by these available to all directly
mappable character devices.

Also comment the capabilities for /dev/zero.

[akpm@osdl.org: ifdef reductions]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* Rougly half of callers already do it by not checking return value
* Code in drivers/acpi/osl.c does the following to be sure:

	(void)kmem_cache_destroy(cache);

* Those who check it printk something, however, slab_error already printed
  the name of failed cache.
* XFS BUGs on failed kmem_cache_destroy which is not the decision
  low-level filesystem driver should make. Converted to ignore.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* Removing useless casts
* Removing useless wrapper
* Conversion from kmalloc+memset to kzalloc
Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Acked-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conversions from kmalloc+memset to kzalloc.
Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some of the changes in balloc.c are just cosmetic, as Andreas pointed out -
if they overflow they'll then underflow and things are fine.

5th hunk actually fixes an overflow problem.

Also check for potential overflows in inode & block counts when resizing.
Signed-off-by: NEric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixing up some endian-ness warnings in preparation to clone ext4 from ext3.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

More white space cleanups in preparation of cloning ext4 from ext3.
Removing spaces that precede a tab.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SWsoft Virtuozzo/OpenVZ Linux kernel team has discovered that ext3 error
behavior was broken in linux kernels since 2.5.x versions by the following
patch:

2002/10/31 02:15:26-05:00 tytso@snap.thunk.org
Default mount options from superblock for ext2/3 filesystems
http://linux.bkbits.net:8080/linux-2.6/gnupatch@3dc0d88eKbV9ivV4ptRNM8fBuA3JBQ

In case ext3 file system is mounted with errors=continue
(EXT3_ERRORS_CONTINUE) errors should be ignored when possible.  However at
present in case of any error kernel aborts journal and remounts filesystem
to read-only.  Such behavior was hit number of times and noted to differ
from that of 2.4.x kernels.

This patch fixes this:
- do nothing in case of EXT3_ERRORS_CONTINUE,
- set EXT3_MOUNT_ABORT and call journal_abort() in all other cases
- panic() should be called after ext3_commit_super() to save
 sb marked as EXT3_ERROR_FS
Signed-off-by: NVasily Averin <vvs@sw.ru>
Acked-by: NKirill Korotaev <dev@sw.ru>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In the past there were a few kernel panics related to block reservation
tree operations failure (insert/remove etc).  It would be very useful to
get the block allocation reservation map info when such error happens.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These are a few places I've found in jbd that look like they may not be
16T-safe, or consistent with the use of unsigned longs for block
containers.  Problems here would be somewhat hard to hit, would require
journal blocks past the 8T boundary, which would not be terribly common.
Still, should fix.

(some of these have come from the ext4 work on jbd as well).

I think there's one more possibility that the wrap() function may not be
safe IF your last block in the journal butts right up against the 232 block
boundary, but that seems like a VERY remote possibility, and I'm not
worrying about it at this point.
Signed-off-by: NEric Sandeen <esandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is primarily format string fixes, with changes to ialloc.c where large
inode counts could overflow, and also pass around journal_inum as an
unsigned long, just to be pedantic about it....
Signed-off-by: NEric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NEric Sandeen <esandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I need to do some actual IO testing now, but this gets things mounting for
a 16T ext3 filesystem.  (patched up e2fsprogs is needed too, I'll send that
off the kernel list)

This patch fixes these issues in the kernel:

o sbi->s_groups_count overflows in ext3_fill_super()

	sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
			       le32_to_cpu(es->s_first_data_block) +
			       EXT3_BLOCKS_PER_GROUP(sb) - 1) /
			      EXT3_BLOCKS_PER_GROUP(sb);

  at 16T, s_blocks_count is already maxed out; adding
  EXT3_BLOCKS_PER_GROUP(sb) overflows it and groups_count comes out to 0.
  Not really what we want, and causes a failed mount.

  Feel free to check my math (actually, please do!), but changing it this
  way should work & avoid the overflow:

  (A + B - 1)/B changed to: ((A - 1)/B) + 1

o ext3_check_descriptors() overflows range checks

  ext3_check_descriptors() iterates over all block groups making sure
  that various bits are within the right block ranges...  on the last pass
  through, it is checking the error case

   [item] >= block + EXT3_BLOCKS_PER_GROUP(sb)

  where "block" is the first block in the last block group.  The last
  block in this group (and the last one that will fit in 32 bits) is block
  + EXT3_BLOCKS_PER_GROUP(sb)- 1.  block + EXT3_BLOCKS_PER_GROUP(sb) wraps
  back around to 0.

  so, make things clearer with "first_block" and "last_block" where those
  are first and last, inclusive, and use <, > rather than <, >=.

  Finally, the last block group may be smaller than the rest, so account
  for this on the last pass through: last_block = sb->s_blocks_count - 1;

(a similar patch could be done for ext2; does anyone in their right mind
use ext2 at 16T?  I'll send an ext2 patch doing the same thing if that's
warranted)
Signed-off-by: NEric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NStephen Tweedie <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove whitespace from ext3 and jbd, before we clone ext4.

Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

jbd_sync_bh releases journal->j_list_lock.  Add a lock annotation to this
function so that sparse can check callers for lock pairing, and so that
sparse will not complain about this function since it intentionally uses
the lock in this manner.
Signed-off-by: NJosh Triplett <josh@freedesktop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As David Howells <dhowells@redhat.com> points out, binfmt_elf sometimes uses
off_t, sometimes uses loff_t.  Use loff_t throughout.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the atomic counter for slab_reclaim_pages and replace the counter
and NR_SLAB with two ZVC counter that account for unreclaimable and
reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE.

Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE.  The
intend seems to be to check for slab pages that could be freed.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do not display HIGHMEM memory sizes if CONFIG_HIGHMEM is not set.

Make HIGHMEM dependent texts and make display of highmem counters optional

Some texts are depending on CONFIG_HIGHMEM.

Remove those strings and remove the display of highmem counter values if
CONFIG_HIGHMEM is not set.

[akpm@osdl.org: remove some ifdefs]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tracking of dirty pages in shared writeable mmap()s.

The idea is simple: write protect clean shared writeable pages, catch the
write-fault, make writeable and set dirty.  On page write-back clean all the
PTE dirty bits and write protect them once again.

The implementation is a tad harder, mainly because the default
backing_dev_info capabilities were too loosely maintained.  Hence it is not
enough to test the backing_dev_info for cap_account_dirty.

The current heuristic is as follows, a VMA is eligible when:
 - its shared writeable
    (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED)
 - it is not a 'special' mapping
    (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0
 - the backing_dev_info is cap_account_dirty
    mapping_cap_account_dirty(vma->vm_file->f_mapping)
 - f_op->mmap() didn't change the default page protection

Page from remap_pfn_range() are explicitly excluded because their COW
semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and
because they don't have a backing store anyway.

mprotect() is taught about the new behaviour as well.  However it overrides
the last condition.

Cleaning the pages on write-back is done with page_mkclean() a new rmap call.
It can be called on any page, but is currently only implemented for mapped
pages, if the page is found the be of a VMA that accounts dirty pages it will
also wrprotect the PTE.

Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from
under ->private_lock.  This seems to be safe, since ->private_lock is used to
serialize access to the buffers, not the page itself.  This is needed because
clear_page_dirty() will call into page_mkclean() and would thereby violate
locking order.

[dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Original commit code assumes, that when a buffer on BJ_SyncData list is
locked, it is being written to disk.  But this is not true and hence it can
lead to a potential data loss on crash.  Also the code didn't count with
the fact that journal_dirty_data() can steal buffers from committing
transaction and hence could write buffers that no longer belong to the
committing transaction.  Finally it could possibly happen that we tried
writing out one buffer several times.

The patch below tries to solve these problems by a complete rewrite of the
data commit code.  We go through buffers on t_sync_datalist, lock buffers
needing write out and store them in an array.  Buffers are also immediately
refiled to BJ_Locked list or unfiled (if the write out is completed).  When
the array is full or we have to block on buffer lock, we submit all
accumulated buffers for IO.

[suitable for 2.6.18.x around the 2.6.19-rc2 timeframe]
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix

linux/fs/compat.c: In function compat_sys_pselect7
linux/fs/compat.c:1869: warning: ignoring return value of copy_to_user, declared with attribute warn_unused_result

To make it easier to handle I changed to semantics to not try to
write out a timespec if an error occurred. I hope that's ok.

Cc: dwmw2@infradead.org
Signed-off-by: NAndi Kleen <ak@suse.de>

Based on patch from Frank van Maarseveen <frankvm@frankvm.com>, but
extended.
Signed-off-by: NAndi Kleen <ak@suse.de>

Don't be crufty.  Mark it __must_check too.

Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make sysfs_remove_bin_file() void.  If it detects an error,
printk the file name and call dump_stack().

sysfs_hash_and_remove() now returns an error code indicating
its success or failure so that sysfs_remove_bin_file() can
know success/failure.

Convert the only driver that checked the return value of
sysfs_remove_bin_file().
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is needed to make the compatible link for /sys/block in the future.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix kernel-doc and typos/spellos in fs/debugfs/.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When no events have been reported by sysfs_notify(), sd->s_events
was previously set to zero.  The initial value for new readers is
also zero, so poll was blocking, regardless of whether the attribute
was read by the process or not.

Make poll behave consistently by setting the initial value of
sd->s_events to non-zero.
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If the timeout of an autofs mount is set to zero then umounts are disabled.
 This works fine, however the kernel module checks the expire timeout and
goes no further if it is zero.  This is not the right thing to do at
shutdown as the module is passed an option to expire mounts regardless of
their timeout setting.

This patch allows autofs to honor the force expire option.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With this, we don't need to pass an additional struct with function pointer.

Now that the callbacks are fully used, comment the remaining API.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Have ocfs2_process_blocked_lock() call ocfs2_generic_unblock_lock(), which
gets to be ocfs2_unblock_lock() now that it's the only possible unblock
function.

Remove the ->unblock() callback from the structure, and all lock type
specific unblock functions.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This way lock types don't have to manually pass it to
ocfs2_generic_unblock_lock().
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The meta data unblocking code no longer needs ocfs2_do_unblock_meta() or
ocfs2_can_downconvert_meta_lock(), so remove them.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Fill in the ->check_downconvert and ->set_lvb callbacks with meta data
specific operations and switch ocfs2_unblock_meta() to call
ocfs2_generic_unblock_lock()
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This allows a lock type to set the value block before downconvert.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This will allow lock types to force a requeue of a lock downconvert.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Tidy up the exit path a bit too.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>