- 29 1月, 2009 40 次提交
-
-
由 Ingo Molnar 提交于
x86/Voyager has this quirk for SCx200 support: config SCx200 tristate "NatSemi SCx200 support" depends on !X86_VOYAGER Remove it - Voyager users can disable drivers they dont need. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Remove Voyager Kconfig quirk: just like any other hardware platform users of Voyager systems can configure in the hardware drivers they need. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
x86/Voyager does not build right now and it's unclear whether it will be cleaned up and ported to the subarch-less 32-bit x86 code - so disable it for now. If it's fixed we'll re-enable it - or remove it after some time. There's a very low number of systems running development kernels on x86/Voyager currently. (one or two on the whole planet) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
CONFIG_BROKEN has been removed from the upstream kernel years ago, but X86_VOYAGER still had a stale reference to it - remove it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Remove the 32-bit subarchitecture support code. All subarchitectures but Voyager have been converted. Voyager will be done later or will be removed. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
We are getting rid of subarchitecture support - move the hook files to asm/. (These are now stale and should be replaced with more explicit runtime mechanisms - but the transition is simpler this way.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Remove remaining bits of the subarchitecture code. Now that all the special platforms are runtime probed and runtime handled, we can remove these facilities. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move mach_ipi.h definitions into genapic.h. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move all the asm/bigsmp/*.h definitions into bigsmp_32.c. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move all code to arch/x86/kernel/bigsmp_32.c. With this it ceases to rely on any build-time subarch features. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move all NUMAQ code into arch/x86/kernel/numaq.c. With this it ceases to rely on any build-time subarch features. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move all ES7000 code into arch/x86/kernel/es7000_32.c. With this it ceases to rely on any build-time subarch features. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
Use apic_read() instead of open-coded mmio. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Spread mach_apic.h definitions into genapic.h. (with some knock-on effects on smp.h and apic.h.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Build fix for !NUMA Summit. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Consolidate all the Summit code into a single file: arch/x86/kernel/summit_32.c. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move all the NUMAQ subarch definitions into numaq.c. With this it ceases to depend on build-time subarch features. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- remove macro wrappers Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move its definitions into apic.h. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move its definitions into mpspec.h. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Move the definition to mpparse.h. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Spread mach_wakecpu.h's definitions into apic.h and genapic.h and remove mach_wakecpu.h. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Consolidate all the ES7000 APIC code into arch/x86/mach-generic/es7000.c. With this ES7000 ceases to rely on any subarchitecture include files. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Nothing exciting - a few subarches dont want APIC remote reads to be performed - the others are content with the default method. - extend the generic code to handle NULL methods - clear out dummy methods and replace them with NULL - clean up: remove wrapper macros, etc. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Nothing actually restores the NMI vector - so remove this logic altogether. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Only NUMAQ does something substantial here, because it initializes via NMIs (not via INIT as standard SMP startup) - so it needs to store and restore the NMI vector. - extend the generic code to handle NULL methods - clear out dummy methods and replace them with NULL - clean up: remove wrapper macros, etc. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Only NUMAQ does something substantial here, because it initializes via NMIs (not via INIT as standard SMP startup) - so it needs to reset the APIC. - extend the generic code to handle NULL methods - clear out dummy methods and replace them with NULL - clean up: remove wrapper macros, etc. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per APIC driver basis - handle a NULL ->wait_for_init_deassert() as a 'dont wait' default method - remove NUMAQ and Summit handlers Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
64-bit x86 has zero for ->trampoline_phys_low/high, but the smpboot code can use these values - so it's better to set them up to their correct values. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per apic driver basis - remove wrapper macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Our send_IPI_*() methods and definitions are a twisted mess: the same symbol is defined to different things depending on .config details, in a non-transparent way. - spread out the quirks into separately named per apic driver methods - prefix the standard PC methods with default_ - get rid of wrapper macro obfuscation - clean up various details Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per driver basis - clean up the functions - get rid of macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup Remove the *_APIC_ID_MASK subarch definitions and move them straight to the genapic driver initialization code. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per driver basis - get rid of wrapper macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace on a per driver basis - get rid of macro wrappers - small cleanups Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the mps_oem_check() namespace on a per APIC driver basis Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Call all the registered MPS quirk handlers early. These methods scan low RAM typically for specific signatures so are safe to be called early. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup - allow NULL ->mps_oem_check() entries - clean up the code flow Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Refactor the ->phys_pkg_id() methods: - namespace separation - macro wrapper removal - open-coded calls to the methods in the generic code Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- unify the call signature of 64-bit to that of 32-bit - clean up the types all around - clean up namespace contamination Signed-off-by: NIngo Molnar <mingo@elte.hu>
-