提交 fa1fc246 编写于 作者: G Greg Ungerer

m68knommu: merge common ColdFire QSPI platform setup code

The ColdFire QSPI is common to quite a few ColdFire CPUs. No need to duplicate
its platform setup code for every CPU family member that has it. Merge all the
setup code into a single shared file.

This also results in few platforms no longer needing any local platform
setup code. In those cases remove the empty devices array and initcall
code as well.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
上级 ed8a2798
......@@ -15,138 +15,14 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m520x_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m520x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
}
}
static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m520x_cs_control = {
.setup = m520x_cs_setup,
.teardown = m520x_cs_teardown,
.select = m520x_cs_select,
.deselect = m520x_cs_deselect,
};
static struct mcfqspi_platform_data m520x_qspi_data = {
.bus_num = 0,
.num_chipselect = 3,
.cs_control = &m520x_cs_control,
};
static struct platform_device m520x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m520x_qspi_resources),
.resource = m520x_qspi_resources,
.dev.platform_data = &m520x_qspi_data,
};
#ifdef CONFIG_SPI_COLDFIRE_QSPI
static void __init m520x_qspi_init(void)
{
......@@ -158,14 +34,8 @@ static void __init m520x_qspi_init(void)
par &= 0x00ff;
writew(par, MCF_GPIO_PAR_UART);
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m520x_devices[] __initdata = {
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m520x_qspi,
#endif
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
/***************************************************************************/
......@@ -218,19 +88,9 @@ void __init config_BSP(char *commandp, int size)
mach_sched_init = hw_timer_init;
m520x_uarts_init();
m520x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
#ifdef CONFIG_SPI_COLDFIRE_QSPI
m520x_qspi_init();
#endif
}
/***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
......@@ -16,158 +16,14 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m523x_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int m523x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m523x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m523x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m523x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m523x_cs_control = {
.setup = m523x_cs_setup,
.teardown = m523x_cs_teardown,
.select = m523x_cs_select,
.deselect = m523x_cs_deselect,
};
static struct mcfqspi_platform_data m523x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m523x_cs_control,
};
static struct platform_device m523x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m523x_qspi_resources),
.resource = m523x_qspi_resources,
.dev.platform_data = &m523x_qspi_data,
};
#ifdef CONFIG_SPI_COLDFIRE_QSPI
static void __init m523x_qspi_init(void)
{
......@@ -180,14 +36,8 @@ static void __init m523x_qspi_init(void)
par &= 0x3f3f;
writew(par, MCFGPIO_PAR_TIMER);
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m523x_devices[] __initdata = {
&m523x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m523x_qspi,
#endif
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
/***************************************************************************/
......@@ -223,10 +73,9 @@ void __init config_BSP(char *commandp, int size)
static int __init init_BSP(void)
{
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
#ifdef CONFIG_SPI_COLDFIRE_QSPI
m523x_qspi_init();
#endif
platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
return 0;
}
......
......@@ -12,12 +12,10 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
......@@ -45,148 +43,15 @@ static struct platform_device m5249_smc91x = {
#endif /* CONFIG_M5249C3 */
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m5249_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m5249_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m5249_cs_control = {
.setup = m5249_cs_setup,
.teardown = m5249_cs_teardown,
.select = m5249_cs_select,
.deselect = m5249_cs_deselect,
static struct platform_device *m5249_devices[] __initdata = {
#ifdef CONFIG_M5249C3
&m5249_smc91x,
#endif
};
static struct mcfqspi_platform_data m5249_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m5249_cs_control,
};
/***************************************************************************/
static struct platform_device m5249_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m5249_qspi_resources),
.resource = m5249_qspi_resources,
.dev.platform_data = &m5249_qspi_data,
};
#ifdef CONFIG_SPI_COLDFIRE_QSPI
static void __init m5249_qspi_init(void)
{
......@@ -195,17 +60,8 @@ static void __init m5249_qspi_init(void)
MCF_MBAR + MCFSIM_QSPIICR);
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m5249_devices[] __initdata = {
#ifdef CONFIG_M5249C3
&m5249_smc91x,
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m5249_qspi,
#endif
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
/***************************************************************************/
......@@ -263,7 +119,7 @@ void __init config_BSP(char *commandp, int size)
#ifdef CONFIG_M5249C3
m5249_smc91x_init();
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
#ifdef CONFIG_SPI_COLDFIRE_QSPI
m5249_qspi_init();
#endif
}
......
......@@ -16,158 +16,14 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m527x_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m527x_cs_control = {
.setup = m527x_cs_setup,
.teardown = m527x_cs_teardown,
.select = m527x_cs_select,
.deselect = m527x_cs_deselect,
};
static struct mcfqspi_platform_data m527x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m527x_cs_control,
};
static struct platform_device m527x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m527x_qspi_resources),
.resource = m527x_qspi_resources,
.dev.platform_data = &m527x_qspi_data,
};
#ifdef CONFIG_SPI_COLDFIRE_QSPI
static void __init m527x_qspi_init(void)
{
......@@ -185,13 +41,8 @@ static void __init m527x_qspi_init(void)
writew(0x003e, MCFGPIO_PAR_QSPI);
#endif
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m527x_devices[] __initdata = {
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m527x_qspi,
#endif
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
/***************************************************************************/
......@@ -250,19 +101,9 @@ void __init config_BSP(char *commandp, int size)
mach_sched_init = hw_timer_init;
m527x_uarts_init();
m527x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
#ifdef CONFIG_SPI_COLDFIRE_QSPI
m527x_qspi_init();
#endif
}
/***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
......@@ -17,145 +17,22 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m528x_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
}
static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
}
static struct mcfqspi_cs_control m528x_cs_control = {
.setup = m528x_cs_setup,
.teardown = m528x_cs_teardown,
.select = m528x_cs_select,
.deselect = m528x_cs_deselect,
};
static struct mcfqspi_platform_data m528x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m528x_cs_control,
};
static struct platform_device m528x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_qspi_resources),
.resource = m528x_qspi_resources,
.dev.platform_data = &m528x_qspi_data,
};
#ifdef CONFIG_SPI_COLDFIRE_QSPI
static void __init m528x_qspi_init(void)
{
/* setup Port QS for QSPI with gpio CS control */
__raw_writeb(0x07, MCFGPIO_PQSPAR);
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m528x_devices[] __initdata = {
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m528x_qspi,
#endif
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
/***************************************************************************/
......@@ -236,10 +113,9 @@ static int __init init_BSP(void)
mach_sched_init = hw_timer_init;
m528x_uarts_init();
m528x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
#ifdef CONFIG_SPI_COLDFIRE_QSPI
m528x_qspi_init();
#endif
platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
return 0;
}
......
......@@ -21,134 +21,24 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfdma.h>
#include <asm/mcfwdebug.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m532x_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int m532x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m532x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m532x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
}
static void m532x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
}
static struct mcfqspi_cs_control m532x_cs_control = {
.setup = m532x_cs_setup,
.teardown = m532x_cs_teardown,
.select = m532x_cs_select,
.deselect = m532x_cs_deselect,
};
static struct mcfqspi_platform_data m532x_qspi_data = {
.bus_num = 0,
.num_chipselect = 3,
.cs_control = &m532x_cs_control,
};
static struct platform_device m532x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m532x_qspi_resources),
.resource = m532x_qspi_resources,
.dev.platform_data = &m532x_qspi_data,
};
#ifdef CONFIG_SPI_COLDFIRE_QSPI
static void __init m532x_qspi_init(void)
{
/* setup QSPS pins for QSPI with gpio CS control */
writew(0x01f0, MCF_GPIO_PAR_QSPI);
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m532x_devices[] __initdata = {
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m532x_qspi,
#endif
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
/***************************************************************************/
......@@ -210,10 +100,9 @@ static int __init init_BSP(void)
{
m532x_uarts_init();
m532x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
#ifdef CONFIG_SPI_COLDFIRE_QSPI
m532x_qspi_init();
#endif
platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
return 0;
}
......
......@@ -11,10 +11,13 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/traps.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/*
* All current ColdFire parts contain from 2, 3 or 4 UARTS.
......@@ -118,6 +121,161 @@ static struct platform_device mcf_fec1 = {
#endif /* MCFFEC_BASE1 */
#endif /* CONFIG_FEC */
#ifdef CONFIG_SPI_COLDFIRE_QSPI
/*
* The ColdFire QSPI module is an SPI protocol hardware block used
* on a number of different ColdFire CPUs.
*/
static struct resource mcf_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
#ifdef MCFQSPI_CS3
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
gpio_free(MCFQSPI_CS3);
goto fail3;
}
#endif
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
#ifdef MCFQSPI_CS3
gpio_free(MCFQSPI_CS3);
#endif
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
#ifdef MCFQSPI_CS3
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
#endif
}
}
static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
#ifdef MCFQSPI_CS3
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
#endif
}
}
static struct mcfqspi_cs_control mcf_cs_control = {
.setup = mcf_cs_setup,
.teardown = mcf_cs_teardown,
.select = mcf_cs_select,
.deselect = mcf_cs_deselect,
};
static struct mcfqspi_platform_data mcf_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &mcf_cs_control,
};
static struct platform_device mcf_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(mcf_qspi_resources),
.resource = mcf_qspi_resources,
.dev.platform_data = &mcf_qspi_data,
};
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
#ifdef CONFIG_FEC
......@@ -126,9 +284,11 @@ static struct platform_device *mcf_devices[] __initdata = {
&mcf_fec1,
#endif
#endif
#ifdef CONFIG_SPI_COLDFIRE_QSPI
&mcf_qspi,
#endif
};
/*
* Some ColdFire UARTs let you set the IRQ line to use.
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册