提交 f8ebdff0 编写于 作者: R Roger Quadros 提交者: Samuel Ortiz

mfd: Fix twl4030 boot with twl4030 usb transceiver enabled

The usb regulator supplies (usb1v5, usb1v8 & usb3v1) must be available
before adding the twl4030_usb child, else twl4030_usb_ldo_init() will
always fail thus causing boot lock-up.

This patch fixes boot on OMAP systems using the twl4030 usb transceiver.
CONFIG_TWL4030_USB=y
Signed-off-by: NRoger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
上级 d93a8f82
......@@ -480,7 +480,6 @@ static int
add_children(struct twl4030_platform_data *pdata, unsigned long features)
{
struct device *child;
struct device *usb_transceiver = NULL;
if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
child = add_child(3, "twl4030_bci",
......@@ -532,16 +531,61 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
}
if (twl_has_usb() && pdata->usb) {
static struct regulator_consumer_supply usb1v5 = {
.supply = "usb1v5",
};
static struct regulator_consumer_supply usb1v8 = {
.supply = "usb1v8",
};
static struct regulator_consumer_supply usb3v1 = {
.supply = "usb3v1",
};
/* First add the regulators so that they can be used by transceiver */
if (twl_has_regulator()) {
/* this is a template that gets copied */
struct regulator_init_data usb_fixed = {
.constraints.valid_modes_mask =
REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.constraints.valid_ops_mask =
REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
};
child = add_regulator_linked(TWL4030_REG_VUSB1V5,
&usb_fixed, &usb1v5, 1);
if (IS_ERR(child))
return PTR_ERR(child);
child = add_regulator_linked(TWL4030_REG_VUSB1V8,
&usb_fixed, &usb1v8, 1);
if (IS_ERR(child))
return PTR_ERR(child);
child = add_regulator_linked(TWL4030_REG_VUSB3V1,
&usb_fixed, &usb3v1, 1);
if (IS_ERR(child))
return PTR_ERR(child);
}
child = add_child(0, "twl4030_usb",
pdata->usb, sizeof(*pdata->usb),
true,
/* irq0 = USB_PRES, irq1 = USB */
pdata->irq_base + 8 + 2, pdata->irq_base + 4);
if (IS_ERR(child))
return PTR_ERR(child);
/* we need to connect regulators to this transceiver */
usb_transceiver = child;
if (twl_has_regulator() && child) {
usb1v5.dev = child;
usb1v8.dev = child;
usb3v1.dev = child;
}
}
if (twl_has_watchdog()) {
......@@ -580,47 +624,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
return PTR_ERR(child);
}
if (twl_has_regulator() && usb_transceiver) {
static struct regulator_consumer_supply usb1v5 = {
.supply = "usb1v5",
};
static struct regulator_consumer_supply usb1v8 = {
.supply = "usb1v8",
};
static struct regulator_consumer_supply usb3v1 = {
.supply = "usb3v1",
};
/* this is a template that gets copied */
struct regulator_init_data usb_fixed = {
.constraints.valid_modes_mask =
REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.constraints.valid_ops_mask =
REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
};
usb1v5.dev = usb_transceiver;
usb1v8.dev = usb_transceiver;
usb3v1.dev = usb_transceiver;
child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
&usb1v5, 1);
if (IS_ERR(child))
return PTR_ERR(child);
child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed,
&usb1v8, 1);
if (IS_ERR(child))
return PTR_ERR(child);
child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed,
&usb3v1, 1);
if (IS_ERR(child))
return PTR_ERR(child);
}
/* maybe add LDOs that are omitted on cost-reduced parts */
if (twl_has_regulator() && !(features & TPS_SUBSET)) {
child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册