From f3a958d30dd1ceac83a3b82b5260475c7697d53a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 8 Oct 2012 15:11:25 +0200 Subject: [PATCH] USB: EHCI: remove CNS3xxx EHCI platform driver The users have been converted to use the ehci platform driver instead, thus making the ehci-cns3xxx driver obsolete, so remove it. Signed-off-by: Florian Fainelli Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 6 +- drivers/usb/host/ehci-cns3xxx.c | 155 -------------------------------- drivers/usb/host/ehci-hcd.c | 5 -- 3 files changed, 5 insertions(+), 161 deletions(-) delete mode 100644 drivers/usb/host/ehci-cns3xxx.c diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index e6b64f606080..d21c0070b05f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -215,9 +215,13 @@ config USB_W90X900_EHCI Enables support for the W90X900 USB controller config USB_CNS3XXX_EHCI - bool "Cavium CNS3XXX EHCI Module" + bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" depends on USB_EHCI_HCD && ARCH_CNS3XXX + select USB_EHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_EHCI_HCD_PLATFORM instead. + Enable support for the CNS3XXX SOC's on-chip EHCI controller. It is needed for high-speed (480Mbit/sec) USB 2.0 device support. diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c deleted file mode 100644 index d91708d2e729..000000000000 --- a/drivers/usb/host/ehci-cns3xxx.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -static int cns3xxx_ehci_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - * - * Set USB AHB INCR length to 16 - */ - if (atomic_inc_return(&usb_pwr_ref) == 1) { - cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); - cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); - __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), - MISC_CHIP_CONFIG_REG); - } - - ehci->caps = hcd->regs; - - hcd->has_tt = 0; - - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 0); - - return retval; -} - -static const struct hc_driver cns3xxx_ehci_hc_driver = { - .description = hcd_name, - .product_desc = "CNS3XXX EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - .reset = cns3xxx_ehci_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - .get_frame_number = ehci_get_frame, - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int cns3xxx_ehci_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct usb_hcd *hcd; - const struct hc_driver *driver = &cns3xxx_ehci_hc_driver; - struct resource *res; - int irq; - int retval; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(dev, "Found HC with no IRQ.\n"); - return -ENODEV; - } - irq = res->start; - - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "Found HC with no register addr.\n"); - retval = -ENODEV; - goto err1; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (hcd->regs == NULL) { - dev_dbg(dev, "error mapping memory\n"); - retval = -EFAULT; - goto err1; - } - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval == 0) - return retval; - -err1: - usb_put_hcd(hcd); - - return retval; -} - -static int cns3xxx_ehci_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - */ - if (atomic_dec_return(&usb_pwr_ref) == 0) - cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - - usb_put_hcd(hcd); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -MODULE_ALIAS("platform:cns3xxx-ehci"); - -static struct platform_driver cns3xxx_ehci_driver = { - .probe = cns3xxx_ehci_probe, - .remove = cns3xxx_ehci_remove, - .driver = { - .name = "cns3xxx-ehci", - }, -}; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index add37bc4bc18..28fb5ddaf786 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1259,11 +1259,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_octeon_driver #endif -#ifdef CONFIG_USB_CNS3XXX_EHCI -#include "ehci-cns3xxx.c" -#define PLATFORM_DRIVER cns3xxx_ehci_driver -#endif - #ifdef CONFIG_ARCH_VT8500 #include "ehci-vt8500.c" #define PLATFORM_DRIVER vt8500_ehci_driver -- GitLab