提交 e9e2cdb4 编写于 作者: T Thomas Gleixner 提交者: Linus Torvalds

[PATCH] clockevents: i386 drivers

Add clockevent drivers for i386: lapic (local) and PIT/HPET (global).  Update
the timer IRQ to call into the PIT/HPET driver's event handler and the
lapic-timer IRQ to call into the lapic clockevent driver.  The assignement of
timer functionality is delegated to the core framework code and replaces the
compile and runtime evalution in do_timer_interrupt_hook()

Use the clockevents broadcast support and implement the lapic_broadcast
function for ACPI.

No changes to existing functionality.

[ kdump fix from Vivek Goyal <vgoyal@in.ibm.com> ]
[ fixes based on review feedback from Arjan van de Ven <arjan@infradead.org> ]
Cleanups-from: Adrian Bunk <bunk@stusta.de>
Build-fixes-from: Andrew Morton <akpm@osdl.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 79bf2bb3
......@@ -22,6 +22,14 @@ config CLOCKSOURCE_WATCHDOG
bool
default y
config GENERIC_CLOCKEVENTS
bool
default y
config GENERIC_CLOCKEVENTS_BROADCAST
bool
default y
config LOCKDEP_SUPPORT
bool
default y
......
......@@ -32,7 +32,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_MODULES) += module.o
obj-y += sysenter.o vsyscall.o
obj-$(CONFIG_ACPI_SRAT) += srat.o
obj-$(CONFIG_HPET_TIMER) += time_hpet.o
obj-$(CONFIG_EFI) += efi.o efi_stub.o
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
obj-$(CONFIG_VM86) += vm86.o
......
......@@ -25,6 +25,7 @@
#include <linux/kernel_stat.h>
#include <linux/sysdev.h>
#include <linux/cpu.h>
#include <linux/clockchips.h>
#include <linux/module.h>
#include <asm/atomic.h>
......@@ -51,12 +52,6 @@
# error SPURIOUS_APIC_VECTOR definition error
#endif
/*
* cpu_mask that denotes the CPUs that needs timer interrupt coming in as
* IPIs in place of local APIC timers
*/
static cpumask_t timer_bcast_ipi;
/*
* Knob to control our willingness to enable the local APIC.
*
......@@ -64,16 +59,38 @@ static cpumask_t timer_bcast_ipi;
*/
static int enable_local_apic __initdata = 0;
/* Enable local APIC timer for highres/dyntick on UP */
static int enable_local_apic_timer __initdata = 0;
/*
* Debug level, exported for io_apic.c
*/
int apic_verbosity;
static void apic_pm_activate(void);
static unsigned int calibration_result;
static int lapic_next_event(unsigned long delta,
struct clock_event_device *evt);
static void lapic_timer_setup(enum clock_event_mode mode,
struct clock_event_device *evt);
static void lapic_timer_broadcast(cpumask_t mask);
static void apic_pm_activate(void);
/* Using APIC to generate smp_local_timer_interrupt? */
int using_apic_timer __read_mostly = 0;
/*
* The local apic timer can be used for any function which is CPU local.
*/
static struct clock_event_device lapic_clockevent = {
.name = "lapic",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
| CLOCK_EVT_FEAT_C3STOP,
.shift = 32,
.set_mode = lapic_timer_setup,
.set_next_event = lapic_next_event,
.broadcast = lapic_timer_broadcast,
.rating = 100,
.irq = -1,
};
static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
/* Local APIC was disabled by the BIOS and enabled by the kernel */
static int enabled_via_apicbase;
......@@ -151,6 +168,11 @@ int lapic_get_maxlvt(void)
* closely follows bus clocks.
*/
/*
* FIXME: Move this to i8253.h. There is no need to keep the access to
* the PIT scattered all around the place -tglx
*/
/*
* The timer chip is already set up at HZ interrupts per second here,
* but we do not accept timer interrupts yet. We only allow the BP
......@@ -209,16 +231,17 @@ void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound;
#define APIC_DIVISOR 16
static void __setup_APIC_LVTT(unsigned int clocks)
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
unsigned int lvtt_value, tmp_value;
int cpu = smp_processor_id();
lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
lvtt_value = LOCAL_TIMER_VECTOR;
if (!oneshot)
lvtt_value |= APIC_LVT_TIMER_PERIODIC;
if (!lapic_is_integrated())
lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
if (cpu_isset(cpu, timer_bcast_ipi))
if (!irqen)
lvtt_value |= APIC_LVT_MASKED;
apic_write_around(APIC_LVTT, lvtt_value);
......@@ -231,23 +254,70 @@ static void __setup_APIC_LVTT(unsigned int clocks)
& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
| APIC_TDR_DIV_16);
if (!oneshot)
apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
}
static void __devinit setup_APIC_timer(unsigned int clocks)
/*
* Program the next event, relative to now
*/
static int lapic_next_event(unsigned long delta,
struct clock_event_device *evt)
{
apic_write_around(APIC_TMICT, delta);
return 0;
}
/*
* Setup the lapic timer in periodic or oneshot mode
*/
static void lapic_timer_setup(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long flags;
unsigned int v;
local_irq_save(flags);
/*
* Wait for IRQ0's slice:
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
case CLOCK_EVT_MODE_ONESHOT:
__setup_APIC_LVTT(calibration_result,
mode != CLOCK_EVT_MODE_PERIODIC, 1);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
v = apic_read(APIC_LVTT);
v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
apic_write_around(APIC_LVTT, v);
break;
}
local_irq_restore(flags);
}
/*
* Local APIC timer broadcast function
*/
wait_timer_tick();
static void lapic_timer_broadcast(cpumask_t mask)
{
#ifdef CONFIG_SMP
send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
#endif
}
__setup_APIC_LVTT(clocks);
/*
* Setup the local APIC timer for this CPU. Copy the initilized values
* of the boot CPU and register the clock event in the framework.
*/
static void __devinit setup_APIC_timer(void)
{
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
local_irq_restore(flags);
memcpy(levt, &lapic_clockevent, sizeof(*levt));
levt->cpumask = cpumask_of_cpu(smp_processor_id());
clockevents_register_device(levt);
}
/*
......@@ -256,6 +326,8 @@ static void __devinit setup_APIC_timer(unsigned int clocks)
* to calibrate, since some later bootup code depends on getting
* the first irq? Ugh.
*
* TODO: Fix this rather than saying "Ugh" -tglx
*
* We want to do the calibration only once since we
* want to have local timer irqs syncron. CPUs connected
* by the same APIC bus have the very same bus frequency.
......@@ -278,7 +350,7 @@ static int __init calibrate_APIC_clock(void)
* value into the APIC clock, we just want to get the
* counter running for calibration.
*/
__setup_APIC_LVTT(1000000000);
__setup_APIC_LVTT(1000000000, 0, 0);
/*
* The timer chip counts down to zero. Let's wait
......@@ -315,6 +387,17 @@ static int __init calibrate_APIC_clock(void)
result = (tt1-tt2)*APIC_DIVISOR/LOOPS;
/* Calculate the scaled math multiplication factor */
lapic_clockevent.mult = div_sc(tt1-tt2, TICK_NSEC * LOOPS, 32);
lapic_clockevent.max_delta_ns =
clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
lapic_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &lapic_clockevent);
apic_printk(APIC_VERBOSE, "..... tt1-tt2 %ld\n", tt1 - tt2);
apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult);
apic_printk(APIC_VERBOSE, "..... calibration result: %ld\n", result);
if (cpu_has_tsc)
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
"%ld.%04ld MHz.\n",
......@@ -329,13 +412,10 @@ static int __init calibrate_APIC_clock(void)
return result;
}
static unsigned int calibration_result;
void __init setup_boot_APIC_clock(void)
{
unsigned long flags;
apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
using_apic_timer = 1;
local_irq_save(flags);
......@@ -343,97 +423,47 @@ void __init setup_boot_APIC_clock(void)
/*
* Now set up the timer for real.
*/
setup_APIC_timer(calibration_result);
setup_APIC_timer();
local_irq_restore(flags);
}
void __devinit setup_secondary_APIC_clock(void)
{
setup_APIC_timer(calibration_result);
setup_APIC_timer();
}
void disable_APIC_timer(void)
{
if (using_apic_timer) {
unsigned long v;
v = apic_read(APIC_LVTT);
/*
* When an illegal vector value (0-15) is written to an LVT
* entry and delivery mode is Fixed, the APIC may signal an
* illegal vector error, with out regard to whether the mask
* bit is set or whether an interrupt is actually seen on
* input.
*
* Boot sequence might call this function when the LVTT has
* '0' vector value. So make sure vector field is set to
* valid value.
/*
* The guts of the apic timer interrupt
*/
v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
apic_write_around(APIC_LVTT, v);
}
}
void enable_APIC_timer(void)
static void local_apic_timer_interrupt(void)
{
int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
if (using_apic_timer && !cpu_isset(cpu, timer_bcast_ipi)) {
unsigned long v;
v = apic_read(APIC_LVTT);
apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
}
}
void switch_APIC_timer_to_ipi(void *cpumask)
{
cpumask_t mask = *(cpumask_t *)cpumask;
int cpu = smp_processor_id();
if (cpu_isset(cpu, mask) &&
!cpu_isset(cpu, timer_bcast_ipi)) {
disable_APIC_timer();
cpu_set(cpu, timer_bcast_ipi);
}
}
EXPORT_SYMBOL(switch_APIC_timer_to_ipi);
void switch_ipi_to_APIC_timer(void *cpumask)
{
cpumask_t mask = *(cpumask_t *)cpumask;
int cpu = smp_processor_id();
if (cpu_isset(cpu, mask) &&
cpu_isset(cpu, timer_bcast_ipi)) {
cpu_clear(cpu, timer_bcast_ipi);
enable_APIC_timer();
/*
* Normally we should not be here till LAPIC has been
* initialized but in some cases like kdump, its possible that
* there is a pending LAPIC timer interrupt from previous
* kernel's context and is delivered in new kernel the moment
* interrupts are enabled.
*
* Interrupts are enabled early and LAPIC is setup much later,
* hence its possible that when we get here evt->event_handler
* is NULL. Check for event_handler being NULL and discard
* the interrupt as spurious.
*/
if (!evt->event_handler) {
printk(KERN_WARNING
"Spurious LAPIC timer interrupt on cpu %d\n", cpu);
/* Switch it off */
lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
return;
}
}
EXPORT_SYMBOL(switch_ipi_to_APIC_timer);
/*
* Local timer interrupt handler. It does both profiling and
* process statistics/rescheduling.
*/
inline void smp_local_timer_interrupt(void)
{
profile_tick(CPU_PROFILING);
#ifdef CONFIG_SMP
update_process_times(user_mode_vm(get_irq_regs()));
#endif
per_cpu(irq_stat, cpu).apic_timer_irqs++;
/*
* We take the 'long' return path, and there every subsystem
* grabs the apropriate locks (kernel lock/ irq lock).
*
* we might want to decouple profiling from the 'long path',
* and do the profiling totally in assembly.
*
* Currently this isn't too much of an issue (performance wise),
* we can take more than 100K local irqs per second on a 100 MHz P5.
*/
evt->event_handler(evt);
}
/*
......@@ -445,15 +475,9 @@ inline void smp_local_timer_interrupt(void)
* interrupt as well. Thus we cannot inline the local irq ... ]
*/
fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
void fastcall smp_apic_timer_interrupt(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
/*
* the NMI deadlock-detector uses this.
*/
per_cpu(irq_stat, cpu).apic_timer_irqs++;
/*
* NOTE! We'd better ACK the irq immediately,
......@@ -467,41 +491,10 @@ fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
*/
exit_idle();
irq_enter();
smp_local_timer_interrupt();
local_apic_timer_interrupt();
irq_exit();
set_irq_regs(old_regs);
}
#ifndef CONFIG_SMP
static void up_apic_timer_interrupt_call(void)
{
int cpu = smp_processor_id();
/*
* the NMI deadlock-detector uses this.
*/
per_cpu(irq_stat, cpu).apic_timer_irqs++;
smp_local_timer_interrupt();
}
#endif
void smp_send_timer_broadcast_ipi(void)
{
cpumask_t mask;
cpus_and(mask, cpu_online_map, timer_bcast_ipi);
if (!cpus_empty(mask)) {
#ifdef CONFIG_SMP
send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
#else
/*
* We can directly call the apic timer interrupt handler
* in UP case. Minus all irq related functions
*/
up_apic_timer_interrupt_call();
#endif
}
set_irq_regs(old_regs);
}
int setup_profiling_timer(unsigned int multiplier)
......@@ -914,6 +907,11 @@ void __devinit setup_local_APIC(void)
printk(KERN_INFO "No ESR for 82489DX.\n");
}
/* Disable the local apic timer */
value = apic_read(APIC_LVTT);
value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
apic_write_around(APIC_LVTT, value);
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
......@@ -1128,6 +1126,13 @@ static int __init parse_nolapic(char *arg)
}
early_param("nolapic", parse_nolapic);
static int __init apic_enable_lapic_timer(char *str)
{
enable_local_apic_timer = 1;
return 0;
}
early_param("lapictimer", apic_enable_lapic_timer);
static int __init apic_set_verbosity(char *str)
{
if (strcmp("debug", str) == 0)
......@@ -1147,7 +1152,7 @@ __setup("apic=", apic_set_verbosity);
/*
* This interrupt should _never_ happen with our APIC/SMP architecture
*/
fastcall void smp_spurious_interrupt(struct pt_regs *regs)
void smp_spurious_interrupt(struct pt_regs *regs)
{
unsigned long v;
......@@ -1171,7 +1176,7 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs)
/*
* This interrupt should never happen with our APIC/SMP architecture
*/
fastcall void smp_error_interrupt(struct pt_regs *regs)
void smp_error_interrupt(struct pt_regs *regs)
{
unsigned long v, v1;
......
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/errno.h>
#include <linux/hpet.h>
#include <linux/init.h>
......@@ -6,17 +7,278 @@
#include <asm/hpet.h>
#include <asm/io.h>
extern struct clock_event_device *global_clock_event;
#define HPET_MASK CLOCKSOURCE_MASK(32)
#define HPET_SHIFT 22
/* FSEC = 10^-15 NSEC = 10^-9 */
#define FSEC_PER_NSEC 1000000
static void __iomem *hpet_ptr;
/*
* HPET address is set in acpi/boot.c, when an ACPI entry exists
*/
unsigned long hpet_address;
static void __iomem * hpet_virt_address;
static inline unsigned long hpet_readl(unsigned long a)
{
return readl(hpet_virt_address + a);
}
static inline void hpet_writel(unsigned long d, unsigned long a)
{
writel(d, hpet_virt_address + a);
}
/*
* HPET command line enable / disable
*/
static int boot_hpet_disable;
static int __init hpet_setup(char* str)
{
if (str) {
if (!strncmp("disable", str, 7))
boot_hpet_disable = 1;
}
return 1;
}
__setup("hpet=", hpet_setup);
static inline int is_hpet_capable(void)
{
return (!boot_hpet_disable && hpet_address);
}
/*
* HPET timer interrupt enable / disable
*/
static int hpet_legacy_int_enabled;
/**
* is_hpet_enabled - check whether the hpet timer interrupt is enabled
*/
int is_hpet_enabled(void)
{
return is_hpet_capable() && hpet_legacy_int_enabled;
}
/*
* When the hpet driver (/dev/hpet) is enabled, we need to reserve
* timer 0 and timer 1 in case of RTC emulation.
*/
#ifdef CONFIG_HPET
static void hpet_reserve_platform_timers(unsigned long id)
{
struct hpet __iomem *hpet = hpet_virt_address;
struct hpet_timer __iomem *timer = &hpet->hpet_timers[2];
unsigned int nrtimers, i;
struct hpet_data hd;
nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
memset(&hd, 0, sizeof (hd));
hd.hd_phys_address = hpet_address;
hd.hd_address = hpet_virt_address;
hd.hd_nirqs = nrtimers;
hd.hd_flags = HPET_DATA_PLATFORM;
hpet_reserve_timer(&hd, 0);
#ifdef CONFIG_HPET_EMULATE_RTC
hpet_reserve_timer(&hd, 1);
#endif
hd.hd_irq[0] = HPET_LEGACY_8254;
hd.hd_irq[1] = HPET_LEGACY_RTC;
for (i = 2; i < nrtimers; timer++, i++)
hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
Tn_INT_ROUTE_CNF_SHIFT;
hpet_alloc(&hd);
}
#else
static void hpet_reserve_platform_timers(unsigned long id) { }
#endif
/*
* Common hpet info
*/
static unsigned long hpet_period;
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt);
static int hpet_next_event(unsigned long delta,
struct clock_event_device *evt);
/*
* The hpet clock event device
*/
static struct clock_event_device hpet_clockevent = {
.name = "hpet",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = hpet_set_mode,
.set_next_event = hpet_next_event,
.shift = 32,
.irq = 0,
};
static void hpet_start_counter(void)
{
unsigned long cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
}
static void hpet_enable_int(void)
{
unsigned long cfg = hpet_readl(HPET_CFG);
cfg |= HPET_CFG_LEGACY;
hpet_writel(cfg, HPET_CFG);
hpet_legacy_int_enabled = 1;
}
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long cfg, cmp, now;
uint64_t delta;
switch(mode) {
case CLOCK_EVT_MODE_PERIODIC:
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult;
delta >>= hpet_clockevent.shift;
now = hpet_readl(HPET_COUNTER);
cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_T0_CFG);
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T0_CFG);
/*
* The first write after writing TN_SETVAL to the
* config register sets the counter value, the second
* write sets the period.
*/
hpet_writel(cmp, HPET_T0_CMP);
udelay(1);
hpet_writel((unsigned long) delta, HPET_T0_CMP);
break;
case CLOCK_EVT_MODE_ONESHOT:
cfg = hpet_readl(HPET_T0_CFG);
cfg &= ~HPET_TN_PERIODIC;
cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T0_CFG);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
cfg = hpet_readl(HPET_T0_CFG);
cfg &= ~HPET_TN_ENABLE;
hpet_writel(cfg, HPET_T0_CFG);
break;
}
}
static int hpet_next_event(unsigned long delta,
struct clock_event_device *evt)
{
unsigned long cnt;
cnt = hpet_readl(HPET_COUNTER);
cnt += delta;
hpet_writel(cnt, HPET_T0_CMP);
return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0);
}
/*
* Try to setup the HPET timer
*/
int __init hpet_enable(void)
{
unsigned long id;
uint64_t hpet_freq;
if (!is_hpet_capable())
return 0;
hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
/*
* Read the period and check for a sane value:
*/
hpet_period = hpet_readl(HPET_PERIOD);
if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
goto out_nohpet;
/*
* The period is a femto seconds value. We need to calculate the
* scaled math multiplication factor for nanosecond to hpet tick
* conversion.
*/
hpet_freq = 1000000000000000ULL;
do_div(hpet_freq, hpet_period);
hpet_clockevent.mult = div_sc((unsigned long) hpet_freq,
NSEC_PER_SEC, 32);
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
&hpet_clockevent);
/*
* Read the HPET ID register to retrieve the IRQ routing
* information and the number of channels
*/
id = hpet_readl(HPET_ID);
#ifdef CONFIG_HPET_EMULATE_RTC
/*
* The legacy routing mode needs at least two channels, tick timer
* and the rtc emulation channel.
*/
if (!(id & HPET_ID_NUMBER))
goto out_nohpet;
#endif
/* Start the counter */
hpet_start_counter();
if (id & HPET_ID_LEGSUP) {
hpet_enable_int();
hpet_reserve_platform_timers(id);
/*
* Start hpet with the boot cpu mask and make it
* global after the IO_APIC has been initialized.
*/
hpet_clockevent.cpumask =cpumask_of_cpu(0);
clockevents_register_device(&hpet_clockevent);
global_clock_event = &hpet_clockevent;
return 1;
}
return 0;
out_nohpet:
iounmap(hpet_virt_address);
hpet_virt_address = NULL;
return 0;
}
/*
* Clock source related code
*/
static cycle_t read_hpet(void)
{
return (cycle_t)readl(hpet_ptr);
return (cycle_t)hpet_readl(HPET_COUNTER);
}
static struct clocksource clocksource_hpet = {
......@@ -24,28 +286,17 @@ static struct clocksource clocksource_hpet = {
.rating = 250,
.read = read_hpet,
.mask = HPET_MASK,
.mult = 0, /* set below */
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init init_hpet_clocksource(void)
{
unsigned long hpet_period;
void __iomem* hpet_base;
u64 tmp;
int err;
if (!is_hpet_enabled())
if (!hpet_virt_address)
return -ENODEV;
/* calculate the hpet address: */
hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
hpet_ptr = hpet_base + HPET_COUNTER;
/* calculate the frequency: */
hpet_period = readl(hpet_base + HPET_PERIOD);
/*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
......@@ -61,11 +312,218 @@ static int __init init_hpet_clocksource(void)
do_div(tmp, FSEC_PER_NSEC);
clocksource_hpet.mult = (u32)tmp;
err = clocksource_register(&clocksource_hpet);
if (err)
iounmap(hpet_base);
return err;
return clocksource_register(&clocksource_hpet);
}
module_init(init_hpet_clocksource);
#ifdef CONFIG_HPET_EMULATE_RTC
/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
* is enabled, we support RTC interrupt functionality in software.
* RTC has 3 kinds of interrupts:
* 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
* is updated
* 2) Alarm Interrupt - generate an interrupt at a specific time of day
* 3) Periodic Interrupt - generate periodic interrupt, with frequencies
* 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
* (1) and (2) above are implemented using polling at a frequency of
* 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
* overhead. (DEFAULT_RTC_INT_FREQ)
* For (3), we use interrupts at 64Hz or user specified periodic
* frequency, whichever is higher.
*/
#include <linux/mc146818rtc.h>
#include <linux/rtc.h>
#define DEFAULT_RTC_INT_FREQ 64
#define DEFAULT_RTC_SHIFT 6
#define RTC_NUM_INTS 1
static unsigned long hpet_rtc_flags;
static unsigned long hpet_prev_update_sec;
static struct rtc_time hpet_alarm_time;
static unsigned long hpet_pie_count;
static unsigned long hpet_t1_cmp;
static unsigned long hpet_default_delta;
static unsigned long hpet_pie_delta;
static unsigned long hpet_pie_limit;
/*
* Timer 1 for RTC emulation. We use one shot mode, as periodic mode
* is not supported by all HPET implementations for timer 1.
*
* hpet_rtc_timer_init() is called when the rtc is initialized.
*/
int hpet_rtc_timer_init(void)
{
unsigned long cfg, cnt, delta, flags;
if (!is_hpet_enabled())
return 0;
if (!hpet_default_delta) {
uint64_t clc;
clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT;
hpet_default_delta = (unsigned long) clc;
}
if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
delta = hpet_default_delta;
else
delta = hpet_pie_delta;
local_irq_save(flags);
cnt = delta + hpet_readl(HPET_COUNTER);
hpet_writel(cnt, HPET_T1_CMP);
hpet_t1_cmp = cnt;
cfg = hpet_readl(HPET_T1_CFG);
cfg &= ~HPET_TN_PERIODIC;
cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T1_CFG);
local_irq_restore(flags);
return 1;
}
/*
* The functions below are called from rtc driver.
* Return 0 if HPET is not being used.
* Otherwise do the necessary changes and return 1.
*/
int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
{
if (!is_hpet_enabled())
return 0;
hpet_rtc_flags &= ~bit_mask;
return 1;
}
int hpet_set_rtc_irq_bit(unsigned long bit_mask)
{
unsigned long oldbits = hpet_rtc_flags;
if (!is_hpet_enabled())
return 0;
hpet_rtc_flags |= bit_mask;
if (!oldbits)
hpet_rtc_timer_init();
return 1;
}
int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
unsigned char sec)
{
if (!is_hpet_enabled())
return 0;
hpet_alarm_time.tm_hour = hrs;
hpet_alarm_time.tm_min = min;
hpet_alarm_time.tm_sec = sec;
return 1;
}
int hpet_set_periodic_freq(unsigned long freq)
{
uint64_t clc;
if (!is_hpet_enabled())
return 0;
if (freq <= DEFAULT_RTC_INT_FREQ)
hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq;
else {
clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
do_div(clc, freq);
clc >>= hpet_clockevent.shift;
hpet_pie_delta = (unsigned long) clc;
}
return 1;
}
int hpet_rtc_dropped_irq(void)
{
return is_hpet_enabled();
}
static void hpet_rtc_timer_reinit(void)
{
unsigned long cfg, delta;
int lost_ints = -1;
if (unlikely(!hpet_rtc_flags)) {
cfg = hpet_readl(HPET_T1_CFG);
cfg &= ~HPET_TN_ENABLE;
hpet_writel(cfg, HPET_T1_CFG);
return;
}
if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
delta = hpet_default_delta;
else
delta = hpet_pie_delta;
/*
* Increment the comparator value until we are ahead of the
* current count.
*/
do {
hpet_t1_cmp += delta;
hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
lost_ints++;
} while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0);
if (lost_ints) {
if (hpet_rtc_flags & RTC_PIE)
hpet_pie_count += lost_ints;
if (printk_ratelimit())
printk(KERN_WARNING "rtc: lost %d interrupts\n",
lost_ints);
}
}
irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
{
struct rtc_time curr_time;
unsigned long rtc_int_flag = 0;
hpet_rtc_timer_reinit();
if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
rtc_get_rtc_time(&curr_time);
if (hpet_rtc_flags & RTC_UIE &&
curr_time.tm_sec != hpet_prev_update_sec) {
rtc_int_flag = RTC_UF;
hpet_prev_update_sec = curr_time.tm_sec;
}
if (hpet_rtc_flags & RTC_PIE &&
++hpet_pie_count >= hpet_pie_limit) {
rtc_int_flag |= RTC_PF;
hpet_pie_count = 0;
}
if (hpet_rtc_flags & RTC_PIE &&
(curr_time.tm_sec == hpet_alarm_time.tm_sec) &&
(curr_time.tm_min == hpet_alarm_time.tm_min) &&
(curr_time.tm_hour == hpet_alarm_time.tm_hour))
rtc_int_flag |= RTC_AF;
if (rtc_int_flag) {
rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
rtc_interrupt(rtc_int_flag, dev_id);
}
return IRQ_HANDLED;
}
#endif
......@@ -2,7 +2,7 @@
* i8253.c 8253/PIT functions
*
*/
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/sysdev.h>
......@@ -19,17 +19,97 @@
DEFINE_SPINLOCK(i8253_lock);
EXPORT_SYMBOL(i8253_lock);
void setup_pit_timer(void)
/*
* HPET replaces the PIT, when enabled. So we need to know, which of
* the two timers is used
*/
struct clock_event_device *global_clock_event;
/*
* Initialize the PIT timer.
*
* This is also called after resume to bring the PIT into operation again.
*/
static void init_pit_timer(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long flags;
spin_lock_irqsave(&i8253_lock, flags);
outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
switch(mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* binary, mode 2, LSB/MSB, ch 0 */
outb_p(0x34, PIT_MODE);
udelay(10);
outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
udelay(10);
outb(LATCH >> 8 , PIT_CH0); /* MSB */
break;
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
/* One shot setup */
outb_p(0x38, PIT_MODE);
udelay(10);
break;
}
spin_unlock_irqrestore(&i8253_lock, flags);
}
/*
* Program the next event in oneshot mode
*
* Delta is given in PIT ticks
*/
static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned long flags;
spin_lock_irqsave(&i8253_lock, flags);
outb_p(delta & 0xff , PIT_CH0); /* LSB */
outb(delta >> 8 , PIT_CH0); /* MSB */
spin_unlock_irqrestore(&i8253_lock, flags);
return 0;
}
/*
* On UP the PIT can serve all of the possible timer functions. On SMP systems
* it can be solely used for the global tick.
*
* The profiling and update capabilites are switched off once the local apic is
* registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
* !using_apic_timer decisions in do_timer_interrupt_hook()
*/
struct clock_event_device pit_clockevent = {
.name = "pit",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = init_pit_timer,
.set_next_event = pit_next_event,
.shift = 32,
.irq = 0,
};
/*
* Initialize the conversion factor and the min/max deltas of the clock event
* structure and register the clock event source with the framework.
*/
void __init setup_pit_timer(void)
{
/*
* Start pit with the boot cpu mask and make it global after the
* IO_APIC has been initialized.
*/
pit_clockevent.cpumask = cpumask_of_cpu(0);
pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32);
pit_clockevent.max_delta_ns =
clockevent_delta2ns(0x7FFF, &pit_clockevent);
pit_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &pit_clockevent);
clockevents_register_device(&pit_clockevent);
global_clock_event = &pit_clockevent;
}
/*
......
......@@ -409,12 +409,6 @@ void __init native_init_IRQ(void)
*/
intr_init_hook();
/*
* Set the clock to HZ Hz, we already have a valid
* vector now:
*/
setup_pit_timer();
/*
* External FPU? Set up irq13 if so, for
* original braindamaged IBM FERR coupling.
......
......@@ -289,8 +289,6 @@ static void __cpuinit smp_callin(void)
*/
smp_store_cpu_info(cpuid);
disable_APIC_timer();
/*
* Allow the master to continue.
*/
......@@ -408,7 +406,6 @@ static void __cpuinit start_secondary(void *unused)
enable_NMI_through_LVT0(NULL);
enable_8259A_irq(0);
}
enable_APIC_timer();
/*
* low-memory mappings have been cleared, flush them from
* the local TLBs too.
......
......@@ -159,15 +159,6 @@ EXPORT_SYMBOL(profile_pc);
*/
irqreturn_t timer_interrupt(int irq, void *dev_id)
{
/*
* Here we are in the timer irq handler. We just have irqs locally
* disabled but we don't know if the timer_bh is running on the other
* CPU. We need to avoid to SMP race with it. NOTE: we don' t need
* the irq version of write_lock because as just said we have irq
* locally disabled. -arca
*/
write_seqlock(&xtime_lock);
#ifdef CONFIG_X86_IO_APIC
if (timer_ack) {
/*
......@@ -186,7 +177,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
do_timer_interrupt_hook();
if (MCA_bus) {
/* The PS/2 uses level-triggered interrupts. You can't
turn them off, nor would you want to (any attempt to
......@@ -201,13 +191,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
outb_p( irq_v|0x80, 0x61 ); /* reset the IRQ */
}
write_sequnlock(&xtime_lock);
#ifdef CONFIG_X86_LOCAL_APIC
if (using_apic_timer)
smp_send_timer_broadcast_ipi();
#endif
return IRQ_HANDLED;
}
......@@ -277,63 +260,16 @@ void notify_arch_cmos_timer(void)
mod_timer(&sync_cmos_timer, jiffies + 1);
}
static int timer_resume(struct sys_device *dev)
{
#ifdef CONFIG_HPET_TIMER
if (is_hpet_enabled())
hpet_reenable();
#endif
setup_pit_timer();
touch_softlockup_watchdog();
return 0;
}
static struct sysdev_class timer_sysclass = {
.resume = timer_resume,
set_kset_name("timer"),
};
/* XXX this driverfs stuff should probably go elsewhere later -john */
static struct sys_device device_timer = {
.id = 0,
.cls = &timer_sysclass,
};
static int time_init_device(void)
{
int error = sysdev_class_register(&timer_sysclass);
if (!error)
error = sysdev_register(&device_timer);
return error;
}
device_initcall(time_init_device);
#ifdef CONFIG_HPET_TIMER
extern void (*late_time_init)(void);
/* Duplicate of time_init() below, with hpet_enable part added */
static void __init hpet_time_init(void)
{
if ((hpet_enable() >= 0) && hpet_use_timer) {
printk("Using HPET for base-timer\n");
}
if (!hpet_enable())
setup_pit_timer();
do_time_init();
}
#endif
void __init time_init(void)
{
#ifdef CONFIG_HPET_TIMER
if (is_hpet_capable()) {
/*
* HPET initialization needs to do memory-mapped io. So, let
* us do a late initialization after mem_init().
*/
late_time_init = hpet_time_init;
return;
}
#endif
do_time_init();
}
/*
* linux/arch/i386/kernel/time_hpet.c
* This code largely copied from arch/x86_64/kernel/time.c
* See that file for credits.
*
* 2003-06-30 Venkatesh Pallipadi - Additional changes for HPET support
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/timer.h>
#include <asm/fixmap.h>
#include <asm/apic.h>
#include <linux/timex.h>
#include <asm/hpet.h>
#include <linux/hpet.h>
static unsigned long hpet_period; /* fsecs / HPET clock */
unsigned long hpet_tick; /* hpet clks count per tick */
unsigned long hpet_address; /* hpet memory map physical address */
int hpet_use_timer;
static int use_hpet; /* can be used for runtime check of hpet */
static int boot_hpet_disable; /* boottime override for HPET timer */
static void __iomem * hpet_virt_address; /* hpet kernel virtual address */
#define FSEC_TO_USEC (1000000000UL)
int hpet_readl(unsigned long a)
{
return readl(hpet_virt_address + a);
}
static void hpet_writel(unsigned long d, unsigned long a)
{
writel(d, hpet_virt_address + a);
}
#ifdef CONFIG_X86_LOCAL_APIC
/*
* HPET counters dont wrap around on every tick. They just change the
* comparator value and continue. Next tick can be caught by checking
* for a change in the comparator value. Used in apic.c.
*/
static void __devinit wait_hpet_tick(void)
{
unsigned int start_cmp_val, end_cmp_val;
start_cmp_val = hpet_readl(HPET_T0_CMP);
do {
end_cmp_val = hpet_readl(HPET_T0_CMP);
} while (start_cmp_val == end_cmp_val);
}
#endif
static int hpet_timer_stop_set_go(unsigned long tick)
{
unsigned int cfg;
/*
* Stop the timers and reset the main counter.
*/
cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
if (hpet_use_timer) {
/*
* Set up timer 0, as periodic with first interrupt to happen at
* hpet_tick, and period also hpet_tick.
*/
cfg = hpet_readl(HPET_T0_CFG);
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T0_CFG);
/*
* The first write after writing TN_SETVAL to the config register sets
* the counter value, the second write sets the threshold.
*/
hpet_writel(tick, HPET_T0_CMP);
hpet_writel(tick, HPET_T0_CMP);
}
/*
* Go!
*/
cfg = hpet_readl(HPET_CFG);
if (hpet_use_timer)
cfg |= HPET_CFG_LEGACY;
cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
return 0;
}
/*
* Check whether HPET was found by ACPI boot parse. If yes setup HPET
* counter 0 for kernel base timer.
*/
int __init hpet_enable(void)
{
unsigned int id;
unsigned long tick_fsec_low, tick_fsec_high; /* tick in femto sec */
unsigned long hpet_tick_rem;
if (boot_hpet_disable)
return -1;
if (!hpet_address) {
return -1;
}
hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
/*
* Read the period, compute tick and quotient.
*/
id = hpet_readl(HPET_ID);
/*
* We are checking for value '1' or more in number field if
* CONFIG_HPET_EMULATE_RTC is set because we will need an
* additional timer for RTC emulation.
* However, we can do with one timer otherwise using the
* the single HPET timer for system time.
*/
#ifdef CONFIG_HPET_EMULATE_RTC
if (!(id & HPET_ID_NUMBER)) {
iounmap(hpet_virt_address);
hpet_virt_address = NULL;
return -1;
}
#endif
hpet_period = hpet_readl(HPET_PERIOD);
if ((hpet_period < HPET_MIN_PERIOD) || (hpet_period > HPET_MAX_PERIOD)) {
iounmap(hpet_virt_address);
hpet_virt_address = NULL;
return -1;
}
/*
* 64 bit math
* First changing tick into fsec
* Then 64 bit div to find number of hpet clk per tick
*/
ASM_MUL64_REG(tick_fsec_low, tick_fsec_high,
KERNEL_TICK_USEC, FSEC_TO_USEC);
ASM_DIV64_REG(hpet_tick, hpet_tick_rem,
hpet_period, tick_fsec_low, tick_fsec_high);
if (hpet_tick_rem > (hpet_period >> 1))
hpet_tick++; /* rounding the result */
hpet_use_timer = id & HPET_ID_LEGSUP;
if (hpet_timer_stop_set_go(hpet_tick)) {
iounmap(hpet_virt_address);
hpet_virt_address = NULL;
return -1;
}
use_hpet = 1;
#ifdef CONFIG_HPET
{
struct hpet_data hd;
unsigned int ntimer;
memset(&hd, 0, sizeof (hd));
ntimer = hpet_readl(HPET_ID);
ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
ntimer++;
/*
* Register with driver.
* Timer0 and Timer1 is used by platform.
*/
hd.hd_phys_address = hpet_address;
hd.hd_address = hpet_virt_address;
hd.hd_nirqs = ntimer;
hd.hd_flags = HPET_DATA_PLATFORM;
hpet_reserve_timer(&hd, 0);
#ifdef CONFIG_HPET_EMULATE_RTC
hpet_reserve_timer(&hd, 1);
#endif
hd.hd_irq[0] = HPET_LEGACY_8254;
hd.hd_irq[1] = HPET_LEGACY_RTC;
if (ntimer > 2) {
struct hpet __iomem *hpet;
struct hpet_timer __iomem *timer;
int i;
hpet = hpet_virt_address;
for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
timer++, i++)
hd.hd_irq[i] = (timer->hpet_config &
Tn_INT_ROUTE_CNF_MASK) >>
Tn_INT_ROUTE_CNF_SHIFT;
}
hpet_alloc(&hd);
}
#endif
#ifdef CONFIG_X86_LOCAL_APIC
if (hpet_use_timer)
wait_timer_tick = wait_hpet_tick;
#endif
return 0;
}
int hpet_reenable(void)
{
return hpet_timer_stop_set_go(hpet_tick);
}
int is_hpet_enabled(void)
{
return use_hpet;
}
int is_hpet_capable(void)
{
if (!boot_hpet_disable && hpet_address)
return 1;
return 0;
}
static int __init hpet_setup(char* str)
{
if (str) {
if (!strncmp("disable", str, 7))
boot_hpet_disable = 1;
}
return 1;
}
__setup("hpet=", hpet_setup);
#ifdef CONFIG_HPET_EMULATE_RTC
/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
* is enabled, we support RTC interrupt functionality in software.
* RTC has 3 kinds of interrupts:
* 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
* is updated
* 2) Alarm Interrupt - generate an interrupt at a specific time of day
* 3) Periodic Interrupt - generate periodic interrupt, with frequencies
* 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
* (1) and (2) above are implemented using polling at a frequency of
* 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
* overhead. (DEFAULT_RTC_INT_FREQ)
* For (3), we use interrupts at 64Hz or user specified periodic
* frequency, whichever is higher.
*/
#include <linux/mc146818rtc.h>
#include <linux/rtc.h>
#define DEFAULT_RTC_INT_FREQ 64
#define RTC_NUM_INTS 1
static unsigned long UIE_on;
static unsigned long prev_update_sec;
static unsigned long AIE_on;
static struct rtc_time alarm_time;
static unsigned long PIE_on;
static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
static unsigned long PIE_count;
static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
static unsigned int hpet_t1_cmp; /* cached comparator register */
/*
* Timer 1 for RTC, we do not use periodic interrupt feature,
* even if HPET supports periodic interrupts on Timer 1.
* The reason being, to set up a periodic interrupt in HPET, we need to
* stop the main counter. And if we do that everytime someone diables/enables
* RTC, we will have adverse effect on main kernel timer running on Timer 0.
* So, for the time being, simulate the periodic interrupt in software.
*
* hpet_rtc_timer_init() is called for the first time and during subsequent
* interuppts reinit happens through hpet_rtc_timer_reinit().
*/
int hpet_rtc_timer_init(void)
{
unsigned int cfg, cnt;
unsigned long flags;
if (!is_hpet_enabled())
return 0;
/*
* Set the counter 1 and enable the interrupts.
*/
if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
hpet_rtc_int_freq = PIE_freq;
else
hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
local_irq_save(flags);
cnt = hpet_readl(HPET_COUNTER);
cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
hpet_writel(cnt, HPET_T1_CMP);
hpet_t1_cmp = cnt;
cfg = hpet_readl(HPET_T1_CFG);
cfg &= ~HPET_TN_PERIODIC;
cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T1_CFG);
local_irq_restore(flags);
return 1;
}
static void hpet_rtc_timer_reinit(void)
{
unsigned int cfg, cnt, ticks_per_int, lost_ints;
if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
cfg = hpet_readl(HPET_T1_CFG);
cfg &= ~HPET_TN_ENABLE;
hpet_writel(cfg, HPET_T1_CFG);
return;
}
if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
hpet_rtc_int_freq = PIE_freq;
else
hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
/* It is more accurate to use the comparator value than current count.*/
ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq;
hpet_t1_cmp += ticks_per_int;
hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
/*
* If the interrupt handler was delayed too long, the write above tries
* to schedule the next interrupt in the past and the hardware would
* not interrupt until the counter had wrapped around.
* So we have to check that the comparator wasn't set to a past time.
*/
cnt = hpet_readl(HPET_COUNTER);
if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) {
lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1;
/* Make sure that, even with the time needed to execute
* this code, the next scheduled interrupt has been moved
* back to the future: */
lost_ints++;
hpet_t1_cmp += lost_ints * ticks_per_int;
hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
if (PIE_on)
PIE_count += lost_ints;
printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
hpet_rtc_int_freq);
}
}
/*
* The functions below are called from rtc driver.
* Return 0 if HPET is not being used.
* Otherwise do the necessary changes and return 1.
*/
int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
{
if (!is_hpet_enabled())
return 0;
if (bit_mask & RTC_UIE)
UIE_on = 0;
if (bit_mask & RTC_PIE)
PIE_on = 0;
if (bit_mask & RTC_AIE)
AIE_on = 0;
return 1;
}
int hpet_set_rtc_irq_bit(unsigned long bit_mask)
{
int timer_init_reqd = 0;
if (!is_hpet_enabled())
return 0;
if (!(PIE_on | AIE_on | UIE_on))
timer_init_reqd = 1;
if (bit_mask & RTC_UIE) {
UIE_on = 1;
}
if (bit_mask & RTC_PIE) {
PIE_on = 1;
PIE_count = 0;
}
if (bit_mask & RTC_AIE) {
AIE_on = 1;
}
if (timer_init_reqd)
hpet_rtc_timer_init();
return 1;
}
int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
{
if (!is_hpet_enabled())
return 0;
alarm_time.tm_hour = hrs;
alarm_time.tm_min = min;
alarm_time.tm_sec = sec;
return 1;
}
int hpet_set_periodic_freq(unsigned long freq)
{
if (!is_hpet_enabled())
return 0;
PIE_freq = freq;
PIE_count = 0;
return 1;
}
int hpet_rtc_dropped_irq(void)
{
if (!is_hpet_enabled())
return 0;
return 1;
}
irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
{
struct rtc_time curr_time;
unsigned long rtc_int_flag = 0;
int call_rtc_interrupt = 0;
hpet_rtc_timer_reinit();
if (UIE_on | AIE_on) {
rtc_get_rtc_time(&curr_time);
}
if (UIE_on) {
if (curr_time.tm_sec != prev_update_sec) {
/* Set update int info, call real rtc int routine */
call_rtc_interrupt = 1;
rtc_int_flag = RTC_UF;
prev_update_sec = curr_time.tm_sec;
}
}
if (PIE_on) {
PIE_count++;
if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
/* Set periodic int info, call real rtc int routine */
call_rtc_interrupt = 1;
rtc_int_flag |= RTC_PF;
PIE_count = 0;
}
}
if (AIE_on) {
if ((curr_time.tm_sec == alarm_time.tm_sec) &&
(curr_time.tm_min == alarm_time.tm_min) &&
(curr_time.tm_hour == alarm_time.tm_hour)) {
/* Set alarm int info, call real rtc int routine */
call_rtc_interrupt = 1;
rtc_int_flag |= RTC_AF;
}
}
if (call_rtc_interrupt) {
rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
rtc_interrupt(rtc_int_flag, dev_id);
}
return IRQ_HANDLED;
}
#endif
......@@ -79,7 +79,12 @@ void __init trap_init_hook(void)
{
}
static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL};
static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_NOBALANCING,
.mask = CPU_MASK_NONE,
.name = "timer"
};
/**
* time_init_hook - do any specific initialisations for the system timer.
......@@ -90,6 +95,7 @@ static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE,
**/
void __init time_init_hook(void)
{
irq0.mask = cpumask_of_cpu(0);
setup_irq(0, &irq0);
}
......
......@@ -39,6 +39,7 @@
#include <linux/moduleparam.h>
#include <linux/sched.h> /* need_resched() */
#include <linux/latency.h>
#include <linux/clockchips.h>
/*
* Include the apic definitions for x86 to have the APIC timer related defines
......@@ -274,12 +275,40 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr,
static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
{
#ifdef CONFIG_GENERIC_CLOCKEVENTS
unsigned long reason;
reason = pr->power.timer_broadcast_on_state < INT_MAX ?
CLOCK_EVT_NOTIFY_BROADCAST_ON : CLOCK_EVT_NOTIFY_BROADCAST_OFF;
clockevents_notify(reason, &pr->id);
#else
cpumask_t mask = cpumask_of_cpu(pr->id);
if (pr->power.timer_broadcast_on_state < INT_MAX)
on_each_cpu(switch_APIC_timer_to_ipi, &mask, 1, 1);
else
on_each_cpu(switch_ipi_to_APIC_timer, &mask, 1, 1);
#endif
}
/* Power(C) State timer broadcast control */
static void acpi_state_timer_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
#ifdef CONFIG_GENERIC_CLOCKEVENTS
int state = cx - pr->power.states;
if (state >= pr->power.timer_broadcast_on_state) {
unsigned long reason;
reason = broadcast ? CLOCK_EVT_NOTIFY_BROADCAST_ENTER :
CLOCK_EVT_NOTIFY_BROADCAST_EXIT;
clockevents_notify(reason, &pr->id);
}
#endif
}
#else
......@@ -287,6 +316,11 @@ static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
static void acpi_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cstate) { }
static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { }
static void acpi_state_timer_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
}
#endif
......@@ -434,6 +468,7 @@ static void acpi_processor_idle(void)
/* Get start time (ticks) */
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Invoke C2 */
acpi_state_timer_broadcast(pr, cx, 1);
acpi_cstate_enter(cx);
/* Get end time (ticks) */
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
......@@ -448,6 +483,7 @@ static void acpi_processor_idle(void)
/* Compute time (ticks) that we were actually asleep */
sleep_ticks =
ticks_elapsed(t1, t2) - cx->latency_ticks - C2_OVERHEAD;
acpi_state_timer_broadcast(pr, cx, 0);
break;
case ACPI_STATE_C3:
......@@ -469,6 +505,7 @@ static void acpi_processor_idle(void)
/* Get start time (ticks) */
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Invoke C3 */
acpi_state_timer_broadcast(pr, cx, 1);
acpi_cstate_enter(cx);
/* Get end time (ticks) */
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
......@@ -488,6 +525,7 @@ static void acpi_processor_idle(void)
/* Compute time (ticks) that we were actually asleep */
sleep_ticks =
ticks_elapsed(t1, t2) - cx->latency_ticks - C3_OVERHEAD;
acpi_state_timer_broadcast(pr, cx, 0);
break;
default:
......
......@@ -113,14 +113,9 @@ extern void smp_local_timer_interrupt (void);
extern void setup_boot_APIC_clock (void);
extern void setup_secondary_APIC_clock (void);
extern int APIC_init_uniprocessor (void);
extern void disable_APIC_timer(void);
extern void enable_APIC_timer(void);
extern void enable_NMI_through_LVT0 (void * dummy);
void smp_send_timer_broadcast_ipi(void);
void switch_APIC_timer_to_ipi(void *cpumask);
void switch_ipi_to_APIC_timer(void *cpumask);
#define ARCH_APICTIMER_STOPS_ON_C3 1
extern int timer_over_8254;
......
......@@ -90,16 +90,19 @@
#define HPET_MIN_PERIOD (100000UL)
#define HPET_TICK_RATE (HZ * 100000UL)
extern unsigned long hpet_tick; /* hpet clks count per tick */
extern unsigned long hpet_address; /* hpet memory map physical address */
extern int hpet_use_timer;
extern int is_hpet_enabled(void);
#ifdef CONFIG_X86_64
extern unsigned long hpet_tick; /* hpet clks count per tick */
extern int hpet_use_timer;
extern int hpet_rtc_timer_init(void);
extern int hpet_enable(void);
extern int hpet_reenable(void);
extern int is_hpet_enabled(void);
extern int is_hpet_capable(void);
extern int hpet_readl(unsigned long a);
#else
extern int hpet_enable(void);
#endif
#ifdef CONFIG_HPET_EMULATE_RTC
extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
......@@ -110,5 +113,10 @@ extern int hpet_rtc_dropped_irq(void);
extern int hpet_rtc_timer_init(void);
extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
#endif /* CONFIG_HPET_EMULATE_RTC */
#else
static inline int hpet_enable(void) { return 0; }
#endif /* CONFIG_HPET_TIMER */
#endif /* _I386_HPET_H */
#ifndef __ASM_I8253_H__
#define __ASM_I8253_H__
#include <linux/clockchips.h>
extern spinlock_t i8253_lock;
extern struct clock_event_device *global_clock_event;
/**
* pit_interrupt_hook - hook into timer tick
* @regs: standard registers from interrupt
*
* Call the global clock event handler.
**/
static inline void pit_interrupt_hook(void)
{
global_clock_event->event_handler(global_clock_event);
}
#endif /* __ASM_I8253_H__ */
/* defines for inline arch setup functions */
#include <linux/clockchips.h>
#include <asm/apic.h>
#include <asm/i8259.h>
#include <asm/i8253.h>
/**
* do_timer_interrupt_hook - hook into timer tick
* @regs: standard registers from interrupt
*
* Description:
* This hook is called immediately after the timer interrupt is ack'd.
* It's primary purpose is to allow architectures that don't possess
* individual per CPU clocks (like the CPU APICs supply) to broadcast the
* timer interrupt as a means of triggering reschedules etc.
* Call the pit clock event handler. see asm/i8253.h
**/
static inline void do_timer_interrupt_hook(void)
{
do_timer(1);
#ifndef CONFIG_SMP
update_process_times(user_mode_vm(get_irq_regs()));
#endif
/*
* In the SMP case we use the local APIC timer interrupt to do the
* profiling, except when we simulate SMP mode on a uniprocessor
* system, in that case we have to call the local interrupt handler.
*/
#ifndef CONFIG_X86_LOCAL_APIC
profile_tick(CPU_PROFILING);
#else
if (!using_apic_timer)
smp_local_timer_interrupt();
#endif
}
/* you can safely undefine this if you don't have the Neptune chipset */
#define BUGGY_NEPTUN_TIMER
/**
* do_timer_overflow - process a detected timer overflow condition
* @count: hardware timer interrupt count on overflow
*
* Description:
* This call is invoked when the jiffies count has not incremented but
* the hardware timer interrupt has. It means that a timer tick interrupt
* came along while the previous one was pending, thus a tick was missed
**/
static inline int do_timer_overflow(int count)
{
int i;
spin_lock(&i8259A_lock);
/*
* This is tricky when I/O APICs are used;
* see do_timer_interrupt().
*/
i = inb(0x20);
spin_unlock(&i8259A_lock);
/* assumption about timer being IRQ0 */
if (i & 0x01) {
/*
* We cannot detect lost timer interrupts ...
* well, that's why we call them lost, don't we? :)
* [hmm, on the Pentium and Alpha we can ... sort of]
*/
count -= LATCH;
} else {
#ifdef BUGGY_NEPTUN_TIMER
/*
* for the Neptun bug we know that the 'latch'
* command doesn't latch the high and low value
* of the counter atomically. Thus we have to
* substract 256 from the counter
* ... funny, isnt it? :)
*/
count -= 256;
#else
printk("do_slow_gettimeoffset(): hardware timer problem?\n");
#endif
}
return count;
pit_interrupt_hook();
}
/* defines for inline arch setup functions */
#include <linux/clockchips.h>
#include <asm/voyager.h>
#include <asm/i8253.h>
/**
* do_timer_interrupt_hook - hook into timer tick
* @regs: standard registers from interrupt
*
* Call the pit clock event handler. see asm/i8253.h
**/
static inline void do_timer_interrupt_hook(void)
{
do_timer(1);
#ifndef CONFIG_SMP
update_process_times(user_mode_vm(irq_regs));
#endif
pit_interrupt_hook();
voyager_timer_interrupt();
}
static inline int do_timer_overflow(int count)
{
/* can't read the ISR, just assume 1 tick
overflow */
if(count > LATCH || count < 0) {
printk(KERN_ERR "VOYAGER PROBLEM: count is %d, latch is %d\n", count, LATCH);
count = LATCH;
}
count -= LATCH;
return count;
}
......@@ -23,7 +23,6 @@ extern struct mpc_config_intsrc mp_irqs [MAX_IRQ_SOURCES];
extern int mpc_default_type;
extern unsigned long mp_lapic_addr;
extern int pic_mode;
extern int using_apic_timer;
#ifdef CONFIG_ACPI
extern void mp_register_lapic (u8 id, u8 enabled);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册