diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 98922f7d2d1236dd7fd29fa404447b46189c0222..3e68a93ce71fee3bfbef5217bad92db338771196 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -704,6 +704,15 @@ config ARCH_S5PV210
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
+config ARCH_S5PV310
+	bool "Samsung S5PV310/S5PC210"
+	select CPU_V7
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select GENERIC_CLOCKEVENTS
+	help
+	  Samsung S5PV310 series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -904,6 +913,8 @@ source "arch/arm/mach-s5pc100/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
+source "arch/arm/mach-s5pv310/Kconfig"
+
 source "arch/arm/mach-shmobile/Kconfig"
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
@@ -1100,10 +1111,11 @@ config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
 		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_S5PV310)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 ||\
+			ARCH_S5PV310)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1172,9 +1184,10 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+		ARCH_U8500 || ARCH_S5PV310)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_S5PV310)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1186,7 +1199,8 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 128 if ARCH_L7200
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || \
+		       ARCH_S5PV210 || ARCH_S5PV310
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64ba313724d2377fda7e439e130d7ad69dd1a83c..d80c9f98d1bfa0d6fe032ddd4fb64ed5065bd432 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -170,6 +170,7 @@ machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
 machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
+machine-$(CONFIG_ARCH_S5PV310)		:= s5pv310
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..24ef3cd5b4bcf8d2f5850530d6369c0da8f5cd7c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -0,0 +1,26 @@
+# arch/arm/mach-s5pv310/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV310
+
+if ARCH_S5PV310
+
+config CPU_S5PV310
+	bool
+	select PLAT_S5P
+	help
+	  Enable S5PV310 CPU support
+
+# machine support
+
+config MACH_SMDKV310
+	bool "SMDKV310"
+	select CPU_S5PV310
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung SMDKV310
+endif
diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..1b263a5b0f5fae43e0c53953670fc762c9168aee
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/mach-s5pv310/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PV310 system
+
+obj-$(CONFIG_CPU_S5PV310)	+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o
+
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
diff --git a/arch/arm/mach-s5pv310/Makefile.boot b/arch/arm/mach-s5pv310/Makefile.boot
new file mode 100644
index 0000000000000000000000000000000000000000..d65956ffb43dddddb7d32a7b897544e7caf73f06
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 101105e5261070118f8039c5ecbcde350792f38f..9ca76bfe471c2bbd2e5cd64de096e8a4c3f28a5d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -782,7 +782,8 @@ config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
+		   ARCH_S5PV310
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 11d6a1bbd90d4e34bb68fbca4cd2c05fd5d562ba..907ac6312a1ddfa94013e9cfa309f44fa36abbd4 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,9 +7,10 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
+	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
 	default y
-	select ARM_VIC
+	select ARM_VIC if !ARCH_S5PV310
+	select ARM_GIC if ARCH_S5PV310
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK