i2c-tiny-usb: Fix a comment on bus frequency

The description of the delay parameter is incomplete, it suggests that
there is a direct relation between the delay value and the bus
frequency. In fact, due to additional delays in the i2c bitbanging
code, the i2c clock is always much slower.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Till Harbaum <Till@Harbaum.org>

drivers/i2c/busses/i2c-tiny-usb.c

@@ -31,11 +31,13 @@
 #define CMD_I2C_IO_BEGIN	(1<<0)
 #define CMD_I2C_IO_END		(1<<1)
 
-/* i2c bit delay, default is 10us -> 100kHz */
+/* i2c bit delay, default is 10us -> 100kHz max
+   (in practice, due to additional delays in the i2c bitbanging
+   code this results in a i2c clock of about 50kHz) */
 static unsigned short delay = 10;
 module_param(delay, ushort, 0);
-MODULE_PARM_DESC(delay, "bit delay in microseconds, "
-		 "e.g. 10 for 100kHz (default is 100kHz)");
+MODULE_PARM_DESC(delay, "bit delay in microseconds "
+		 "(default is 10us for 100kHz max)");
 
 static int usb_read(struct i2c_adapter *adapter, int cmd,
 		    int value, int index, void *data, int len);