提交 a2a571b7 编写于 作者: N Nicolas Ferre

AT91: pm: make sure that r0 is 0 when dealing with cache operations

When using CP15 cache operations (c7), we make sure that Rd (r0)
is actually 0 as ARM 926 TRM is saying.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
上级 8aeeda82
......@@ -261,8 +261,13 @@ static int at91_pm_enter(suspend_state_t state)
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
asm("b 1f; .align 5; 1:");
asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
asm volatile ( "mov r0, #0\n\t"
"b 1f\n\t"
".align 5\n\t"
"1: mcr p15, 0, r0, c7, c10, 4\n\t"
: /* no output */
: /* no input */
: "r0");
saved_lpr = sdram_selfrefresh_enable();
wait_for_interrupt_enable();
sdram_selfrefresh_disable(saved_lpr);
......
......@@ -21,7 +21,8 @@ static inline u32 sdram_selfrefresh_enable(void)
}
#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
#define wait_for_interrupt_enable() asm("mcr p15, 0, r0, c7, c0, 4")
#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
: : "r" (0))
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9_ddrsdr.h>
......
......@@ -124,6 +124,7 @@ ENTRY(at91_slow_clock)
ldr r5, .at91_va_base_ramc1
/* Drain write buffer */
mov r0, #0
mcr p15, 0, r0, c7, c10, 4
#ifdef CONFIG_ARCH_AT91RM9200
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册