regulator: anatop: allow regulator to be in bypass mode

Bypass support was added in commit d38018f2 ("regulator: anatop: Add
bypass support to digital LDOs"). A check for valid voltage selectors was
added in commit da0607c8 ("regulator: anatop: Fail on invalid voltage
selector") but it also discards all regulators that are in bypass mode. Add
check for the bypass setting. Errors below were seen on a Variscite mx6
board.

anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22
anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22

Fixes: da0607c8 ("regulator: anatop: Fail on invalid voltage selector")
Signed-off-by: NMika Båtsman <mbatsman@mvista.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

drivers/regulator/anatop-regulator.c

@@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
-		if (!sreg->sel) {
+		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
 		}