diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 0bd48e8f21bdaf9dfdff8c04d44b8ca98682196e..f6b285890ae967310945355f89066db3d9837eaf 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.6.7"
+#define DRV_VERSION	"0.6.8"
 
 struct hpt_clock {
 	u8	xfer_mode;
@@ -207,17 +207,8 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
 {
 	struct hpt_clock *clocks = ap->host->private_data;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u32 addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
-	u32 addr2 = 0x51 + 4 * ap->port_no;
+	u32 addr = 0x40 + 4 * adev->devno;
 	u32 mask, reg;
-	u8 fast;
-
-	/* Fast interrupt prediction disable, hold off interrupt disable */
-	pci_read_config_byte(pdev, addr2, &fast);
-	if (fast & 0x80) {
-		fast &= ~0x80;
-		pci_write_config_byte(pdev, addr2, fast);
-	}
 
 	/* determine timing mask and find matching clock entry */
 	if (mode < XFER_MW_DMA_0)
@@ -240,9 +231,9 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
 	 * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid
 	 * problems handling I/O errors later.
 	 */
-	pci_read_config_dword(pdev, addr1, &reg);
+	pci_read_config_dword(pdev, addr, &reg);
 	reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000;
-	pci_write_config_dword(pdev, addr1, reg);
+	pci_write_config_dword(pdev, addr, reg);
 }
 
 /**