提交 85802afe 编写于 作者: C Catalin Marinas 提交者: Russell King

[ARM] 4811/1: RealView: clocksource support for the RealView platforms

The patch updates the RealView platform code to use the generic
clocksource infrastructure for basic time keeping. Based on the
Versatile implementation by Kevin Hilman.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 ae9458d6
...@@ -168,6 +168,7 @@ config ARCH_REALVIEW ...@@ -168,6 +168,7 @@ config ARCH_REALVIEW
bool "ARM Ltd. RealView family" bool "ARM Ltd. RealView family"
select ARM_AMBA select ARM_AMBA
select ICST307 select ICST307
select GENERIC_TIME
help help
This enables support for ARM Ltd RealView boards. This enables support for ARM Ltd RealView boards.
......
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/amba/bus.h> #include <linux/amba/bus.h>
#include <linux/amba/clcd.h> #include <linux/amba/clcd.h>
#include <linux/clocksource.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/hardware.h> #include <asm/hardware.h>
...@@ -484,47 +485,6 @@ void realview_leds_event(led_event_t ledevt) ...@@ -484,47 +485,6 @@ void realview_leds_event(led_event_t ledevt)
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif #endif
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
static unsigned long realview_gettimeoffset(void)
{
unsigned long ticks1, ticks2, status;
/*
* Get the current number of ticks. Note that there is a race
* condition between us reading the timer and checking for
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
+ ((IRQ_TIMERINT0_1 >> 5) << 2));
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
} while (ticks2 > ticks1);
/*
* Number of ticks since last interrupt.
*/
ticks1 = TIMER_RELOAD - ticks2;
/*
* Interrupt pending? If so, we've reloaded once already.
*
* FIXME: Need to check this is effectively timer 0 that expires
*/
if (status & IRQMASK_TIMERINT0_1)
ticks1 += TIMER_RELOAD;
/*
* Convert the ticks to usecs
*/
return TICKS2USECS(ticks1);
}
/* /*
* IRQ handler for the timer * IRQ handler for the timer
*/ */
...@@ -549,6 +509,34 @@ static struct irqaction realview_timer_irq = { ...@@ -549,6 +509,34 @@ static struct irqaction realview_timer_irq = {
.handler = realview_timer_interrupt, .handler = realview_timer_interrupt,
}; };
static cycle_t realview_get_cycles(void)
{
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
}
static struct clocksource clocksource_realview = {
.name = "timer3",
.rating = 200,
.read = realview_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void __init realview_clocksource_init(void)
{
/* setup timer 0 as free-running clocksource */
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
TIMER3_VA_BASE + TIMER_CTRL);
clocksource_realview.mult =
clocksource_khz2mult(1000, clocksource_realview.shift);
clocksource_register(&clocksource_realview);
}
/* /*
* Set up timer interrupt, and return the current time in seconds. * Set up timer interrupt, and return the current time in seconds.
*/ */
...@@ -585,9 +573,10 @@ static void __init realview_timer_init(void) ...@@ -585,9 +573,10 @@ static void __init realview_timer_init(void)
* Make irqs happen for the system timer * Make irqs happen for the system timer
*/ */
setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq); setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
realview_clocksource_init();
} }
struct sys_timer realview_timer = { struct sys_timer realview_timer = {
.init = realview_timer_init, .init = realview_timer_init,
.offset = realview_gettimeoffset,
}; };
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册