diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5ac27ed0c6356e3ccdcd7717e737b92c47a3e928..497dbb29744d720eb9417bf959c8c2c1d6ec2a80 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3037,7 +3037,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* maybe switch power back on (e.g. root hub was reset) */ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 - && !(portstatus & (1 << USB_PORT_FEAT_POWER))) + && !(portstatus & USB_PORT_STAT_POWER)) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); if (portstatus & USB_PORT_STAT_ENABLE) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c7178bcde67a99da38c2e08b1b2a8bb4481a7a14..c44018109a13fabeeed26f49c8dcb6ea5bef5109 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -659,7 +659,7 @@ static int ehci_hub_control ( * Even if OWNER is set, so the port is owned by the * companion controller, khubd needs to be able to clear * the port-change status bits (especially - * USB_PORT_FEAT_C_CONNECTION). + * USB_PORT_STAT_C_CONNECTION). */ switch (wValue) { @@ -729,12 +729,12 @@ static int ehci_hub_control ( // wPortChange bits if (temp & PORT_CSC) - status |= 1 << USB_PORT_FEAT_C_CONNECTION; + status |= USB_PORT_STAT_C_CONNECTION << 16; if (temp & PORT_PEC) - status |= 1 << USB_PORT_FEAT_C_ENABLE; + status |= USB_PORT_STAT_C_ENABLE << 16; if ((temp & PORT_OCC) && !ignore_oc){ - status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; + status |= USB_PORT_STAT_C_OVERCURRENT << 16; /* * Hubs should disable port power on over-current. @@ -791,7 +791,7 @@ static int ehci_hub_control ( if ((temp & PORT_RESET) && time_after_eq(jiffies, ehci->reset_done[wIndex])) { - status |= 1 << USB_PORT_FEAT_C_RESET; + status |= USB_PORT_STAT_C_RESET << 16; ehci->reset_done [wIndex] = 0; /* force reset to complete */ @@ -833,7 +833,7 @@ static int ehci_hub_control ( */ if (temp & PORT_CONNECT) { - status |= 1 << USB_PORT_FEAT_CONNECTION; + status |= USB_PORT_STAT_CONNECTION; // status may be from integrated TT if (ehci->has_hostpc) { temp1 = ehci_readl(ehci, hostpc_reg); @@ -842,11 +842,11 @@ static int ehci_hub_control ( status |= ehci_port_speed(ehci, temp); } if (temp & PORT_PE) - status |= 1 << USB_PORT_FEAT_ENABLE; + status |= USB_PORT_STAT_ENABLE; /* maybe the port was unsuspended without our knowledge */ if (temp & (PORT_SUSPEND|PORT_RESUME)) { - status |= 1 << USB_PORT_FEAT_SUSPEND; + status |= USB_PORT_STAT_SUSPEND; } else if (test_bit(wIndex, &ehci->suspended_ports)) { clear_bit(wIndex, &ehci->suspended_ports); ehci->reset_done[wIndex] = 0; @@ -855,13 +855,13 @@ static int ehci_hub_control ( } if (temp & PORT_OC) - status |= 1 << USB_PORT_FEAT_OVER_CURRENT; + status |= USB_PORT_STAT_OVERCURRENT; if (temp & PORT_RESET) - status |= 1 << USB_PORT_FEAT_RESET; + status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) - status |= 1 << USB_PORT_FEAT_POWER; + status |= USB_PORT_STAT_POWER; if (test_bit(wIndex, &ehci->port_c_suspend)) - status |= 1 << USB_PORT_FEAT_C_SUSPEND; + status |= USB_PORT_STAT_C_SUSPEND << 16; #ifndef VERBOSE_DEBUG if (status & ~0xffff) /* only if wPortChange is interesting */ diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index acc157da72757d89dc7fd76e394658d1a94c94ae..6a6a50849bfed0321859ba665a3bb105e068d5de 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -1265,7 +1265,7 @@ static int isp1362_urb_enqueue(struct usb_hcd *hcd, /* don't submit to a dead or disabled port */ if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) & - (1 << USB_PORT_FEAT_ENABLE)) || + USB_PORT_STAT_ENABLE) || !HC_IS_RUNNING(hcd->state)) { kfree(ep); retval = -ENODEV; diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index cfdac6da95560d2844d43f18aa4922b33c2a01ed..13f7d1200bc0bdccd63bcffe2463d3a78edc37f3 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1923,7 +1923,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, * Even if OWNER is set, so the port is owned by the * companion controller, khubd needs to be able to clear * the port-change status bits (especially - * USB_PORT_FEAT_C_CONNECTION). + * USB_PORT_STAT_C_CONNECTION). */ switch (wValue) { @@ -1987,7 +1987,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, /* wPortChange bits */ if (temp & PORT_CSC) - status |= 1 << USB_PORT_FEAT_C_CONNECTION; + status |= USB_PORT_STAT_C_CONNECTION << 16; /* whoever resumes must GetPortStatus to complete it!! */ @@ -2007,7 +2007,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, /* resume completed? */ else if (time_after_eq(jiffies, priv->reset_done)) { - status |= 1 << USB_PORT_FEAT_C_SUSPEND; + status |= USB_PORT_STAT_C_SUSPEND << 16; priv->reset_done = 0; /* stop resume signaling */ @@ -2031,7 +2031,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, if ((temp & PORT_RESET) && time_after_eq(jiffies, priv->reset_done)) { - status |= 1 << USB_PORT_FEAT_C_RESET; + status |= USB_PORT_STAT_C_RESET << 16; priv->reset_done = 0; /* force reset to complete */ @@ -2062,18 +2062,18 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, printk(KERN_ERR "Warning: PORT_OWNER is set\n"); if (temp & PORT_CONNECT) { - status |= 1 << USB_PORT_FEAT_CONNECTION; + status |= USB_PORT_STAT_CONNECTION; /* status may be from integrated TT */ status |= ehci_port_speed(priv, temp); } if (temp & PORT_PE) - status |= 1 << USB_PORT_FEAT_ENABLE; + status |= USB_PORT_STAT_ENABLE; if (temp & (PORT_SUSPEND|PORT_RESUME)) - status |= 1 << USB_PORT_FEAT_SUSPEND; + status |= USB_PORT_STAT_SUSPEND; if (temp & PORT_RESET) - status |= 1 << USB_PORT_FEAT_RESET; + status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) - status |= 1 << USB_PORT_FEAT_POWER; + status |= USB_PORT_STAT_POWER; put_unaligned(cpu_to_le32(status), (__le32 *) buf); break; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 8f04c0afa59ff1e2c00a6427cd20b702762487e3..f608dfd09a8aa8dccf76d71d13a6b944dbbdada1 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -3201,7 +3201,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq, * Even if OWNER is set, so the port is owned by the * companion controller, khubd needs to be able to clear * the port-change status bits (especially - * USB_PORT_FEAT_C_CONNECTION). + * USB_PORT_STAT_C_CONNECTION). */ switch (wValue) { @@ -3263,11 +3263,11 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq, /* wPortChange bits */ if (temp & PORT_CSC) - status |= 1 << USB_PORT_FEAT_C_CONNECTION; + status |= USB_PORT_STAT_C_CONNECTION << 16; if (temp & PORT_PEC) - status |= 1 << USB_PORT_FEAT_C_ENABLE; + status |= USB_PORT_STAT_C_ENABLE << 16; if ((temp & PORT_OCC) && !ignore_oc) - status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; + status |= USB_PORT_STAT_C_OVERCURRENT << 16; /* whoever resumes must GetPortStatus to complete it!! */ if (temp & PORT_RESUME) { @@ -3285,7 +3285,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq, /* resume completed? */ else if (time_after_eq(jiffies, oxu->reset_done[wIndex])) { - status |= 1 << USB_PORT_FEAT_C_SUSPEND; + status |= USB_PORT_STAT_C_SUSPEND << 16; oxu->reset_done[wIndex] = 0; /* stop resume signaling */ @@ -3308,7 +3308,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq, if ((temp & PORT_RESET) && time_after_eq(jiffies, oxu->reset_done[wIndex])) { - status |= 1 << USB_PORT_FEAT_C_RESET; + status |= USB_PORT_STAT_C_RESET << 16; oxu->reset_done[wIndex] = 0; /* force reset to complete */ @@ -3347,20 +3347,20 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq, */ if (temp & PORT_CONNECT) { - status |= 1 << USB_PORT_FEAT_CONNECTION; + status |= USB_PORT_STAT_CONNECTION; /* status may be from integrated TT */ status |= oxu_port_speed(oxu, temp); } if (temp & PORT_PE) - status |= 1 << USB_PORT_FEAT_ENABLE; + status |= USB_PORT_STAT_ENABLE; if (temp & (PORT_SUSPEND|PORT_RESUME)) - status |= 1 << USB_PORT_FEAT_SUSPEND; + status |= USB_PORT_STAT_SUSPEND; if (temp & PORT_OC) - status |= 1 << USB_PORT_FEAT_OVER_CURRENT; + status |= USB_PORT_STAT_OVERCURRENT; if (temp & PORT_RESET) - status |= 1 << USB_PORT_FEAT_RESET; + status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) - status |= 1 << USB_PORT_FEAT_POWER; + status |= USB_PORT_STAT_POWER; #ifndef OXU_VERBOSE_DEBUG if (status & ~0xffff) /* only if wPortChange is interesting */ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index a004a12208481c94957a151f3d607ee8ec6defb9..6db57ab6079d31a7a6a2d107834ba42eeeec9839 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1018,10 +1018,10 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port, rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST; rh->scount = R8A66597_MAX_SAMPLING; if (connect) - rh->port |= 1 << USB_PORT_FEAT_CONNECTION; + rh->port |= USB_PORT_STAT_CONNECTION; else - rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION); - rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION; + rh->port &= ~USB_PORT_STAT_CONNECTION; + rh->port |= USB_PORT_STAT_C_CONNECTION << 16; r8a66597_root_hub_start_polling(r8a66597); } @@ -1065,8 +1065,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) else if (speed == LSMODE) rh->port |= USB_PORT_STAT_LOW_SPEED; - rh->port &= ~(1 << USB_PORT_FEAT_RESET); - rh->port |= 1 << USB_PORT_FEAT_ENABLE; + rh->port &= USB_PORT_STAT_RESET; + rh->port |= USB_PORT_STAT_ENABLE; } /* this function must be called with interrupt disabled */ @@ -1705,7 +1705,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port) u16 tmp; struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; - if (rh->port & (1 << USB_PORT_FEAT_RESET)) { + if (rh->port & USB_PORT_STAT_RESET) { unsigned long dvstctr_reg = get_dvstctr_reg(port); tmp = r8a66597_read(r8a66597, dvstctr_reg); @@ -1717,7 +1717,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port) r8a66597_usb_connect(r8a66597, port); } - if (!(rh->port & (1 << USB_PORT_FEAT_CONNECTION))) { + if (!(rh->port & USB_PORT_STAT_CONNECTION)) { r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port)); r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port)); } @@ -2185,7 +2185,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, switch (wValue) { case USB_PORT_FEAT_ENABLE: - rh->port &= ~(1 << USB_PORT_FEAT_POWER); + rh->port &= ~USB_PORT_STAT_POWER; break; case USB_PORT_FEAT_SUSPEND: break; @@ -2226,12 +2226,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_POWER: r8a66597_port_power(r8a66597, port, 1); - rh->port |= (1 << USB_PORT_FEAT_POWER); + rh->port |= USB_PORT_STAT_POWER; break; case USB_PORT_FEAT_RESET: { struct r8a66597_device *dev = rh->dev; - rh->port |= (1 << USB_PORT_FEAT_RESET); + rh->port |= USB_PORT_STAT_RESET; disable_r8a66597_pipe_all(r8a66597, dev); free_usb_address(r8a66597, dev, 1); @@ -2269,12 +2269,12 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd) struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; unsigned long dvstctr_reg = get_dvstctr_reg(port); - if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE))) + if (!(rh->port & USB_PORT_STAT_ENABLE)) continue; dbg("suspend port = %d", port); r8a66597_bclr(r8a66597, UACT, dvstctr_reg); /* suspend */ - rh->port |= 1 << USB_PORT_FEAT_SUSPEND; + rh->port |= USB_PORT_STAT_SUSPEND; if (rh->dev->udev->do_remote_wakeup) { msleep(3); /* waiting last SOF */ @@ -2300,12 +2300,12 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; unsigned long dvstctr_reg = get_dvstctr_reg(port); - if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND))) + if (!(rh->port & USB_PORT_STAT_SUSPEND)) continue; dbg("resume port = %d", port); - rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND); - rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND; + rh->port &= ~USB_PORT_STAT_SUSPEND; + rh->port |= USB_PORT_STAT_C_SUSPEND < 16; r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg); msleep(50); r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index dcd7fab7179cf3fb166f6d46b243159f9f19980a..bcf9f0e809dedbd194d34cd6e2a39639a1ff94ea 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -90,10 +90,10 @@ static void port_power(struct sl811 *sl811, int is_on) /* hub is inactive unless the port is powered */ if (is_on) { - if (sl811->port1 & (1 << USB_PORT_FEAT_POWER)) + if (sl811->port1 & USB_PORT_STAT_POWER) return; - sl811->port1 = (1 << USB_PORT_FEAT_POWER); + sl811->port1 = USB_PORT_STAT_POWER; sl811->irq_enable = SL11H_INTMASK_INSRMV; } else { sl811->port1 = 0; @@ -407,7 +407,7 @@ static struct sl811h_ep *start(struct sl811 *sl811, u8 bank) static inline void start_transfer(struct sl811 *sl811) { - if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) + if (sl811->port1 & USB_PORT_STAT_SUSPEND) return; if (sl811->active_a == NULL) { sl811->active_a = start(sl811, SL811_EP_A(SL811_HOST_BUF)); @@ -721,23 +721,23 @@ static irqreturn_t sl811h_irq(struct usb_hcd *hcd) * force the reset and make khubd clean up later. */ if (irqstat & SL11H_INTMASK_RD) - sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION); + sl811->port1 &= ~USB_PORT_STAT_CONNECTION; else - sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION; + sl811->port1 |= USB_PORT_STAT_CONNECTION; - sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION; + sl811->port1 |= USB_PORT_STAT_C_CONNECTION << 16; } else if (irqstat & SL11H_INTMASK_RD) { - if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) { + if (sl811->port1 & USB_PORT_STAT_SUSPEND) { DBG("wakeup\n"); - sl811->port1 |= 1 << USB_PORT_FEAT_C_SUSPEND; + sl811->port1 |= USB_PORT_STAT_C_SUSPEND << 16; sl811->stat_wake++; } else irqstat &= ~SL11H_INTMASK_RD; } if (irqstat) { - if (sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)) + if (sl811->port1 & USB_PORT_STAT_ENABLE) start_transfer(sl811); ret = IRQ_HANDLED; if (retries--) @@ -819,7 +819,7 @@ static int sl811h_urb_enqueue( spin_lock_irqsave(&sl811->lock, flags); /* don't submit to a dead or disabled port */ - if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)) + if (!(sl811->port1 & USB_PORT_STAT_ENABLE) || !HC_IS_RUNNING(hcd->state)) { retval = -ENODEV; kfree(ep); @@ -1119,8 +1119,8 @@ sl811h_timer(unsigned long _sl811) unsigned long flags; u8 irqstat; u8 signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE; - const u32 mask = (1 << USB_PORT_FEAT_CONNECTION) - | (1 << USB_PORT_FEAT_ENABLE) + const u32 mask = USB_PORT_STAT_CONNECTION + | USB_PORT_STAT_ENABLE | USB_PORT_STAT_LOW_SPEED; spin_lock_irqsave(&sl811->lock, flags); @@ -1135,8 +1135,8 @@ sl811h_timer(unsigned long _sl811) switch (signaling) { case SL11H_CTL1MASK_SE0: DBG("end reset\n"); - sl811->port1 = (1 << USB_PORT_FEAT_C_RESET) - | (1 << USB_PORT_FEAT_POWER); + sl811->port1 = (USB_PORT_STAT_C_RESET << 16) + | USB_PORT_STAT_POWER; sl811->ctrl1 = 0; /* don't wrongly ack RD */ if (irqstat & SL11H_INTMASK_INSRMV) @@ -1144,7 +1144,7 @@ sl811h_timer(unsigned long _sl811) break; case SL11H_CTL1MASK_K: DBG("end resume\n"); - sl811->port1 &= ~(1 << USB_PORT_FEAT_SUSPEND); + sl811->port1 &= ~USB_PORT_STAT_SUSPEND; break; default: DBG("odd timer signaling: %02x\n", signaling); @@ -1154,9 +1154,9 @@ sl811h_timer(unsigned long _sl811) if (irqstat & SL11H_INTMASK_RD) { /* usbcore nukes all pending transactions on disconnect */ - if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) - sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION) - | (1 << USB_PORT_FEAT_C_ENABLE); + if (sl811->port1 & USB_PORT_STAT_CONNECTION) + sl811->port1 |= (USB_PORT_STAT_C_CONNECTION << 16) + | (USB_PORT_STAT_C_ENABLE << 16); sl811->port1 &= ~mask; sl811->irq_enable = SL11H_INTMASK_INSRMV; } else { @@ -1166,7 +1166,7 @@ sl811h_timer(unsigned long _sl811) sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD; } - if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) { + if (sl811->port1 & USB_PORT_STAT_CONNECTION) { u8 ctrl2 = SL811HS_CTL2_INIT; sl811->irq_enable |= SL11H_INTMASK_DONE_A; @@ -1233,7 +1233,7 @@ sl811h_hub_control( switch (wValue) { case USB_PORT_FEAT_ENABLE: - sl811->port1 &= (1 << USB_PORT_FEAT_POWER); + sl811->port1 &= USB_PORT_STAT_POWER; sl811->ctrl1 = 0; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); sl811->irq_enable = SL11H_INTMASK_INSRMV; @@ -1241,7 +1241,7 @@ sl811h_hub_control( sl811->irq_enable); break; case USB_PORT_FEAT_SUSPEND: - if (!(sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))) + if (!(sl811->port1 & USB_PORT_STAT_SUSPEND)) break; /* 20 msec of resume/K signaling, other irqs blocked */ @@ -1290,9 +1290,9 @@ sl811h_hub_control( goto error; switch (wValue) { case USB_PORT_FEAT_SUSPEND: - if (sl811->port1 & (1 << USB_PORT_FEAT_RESET)) + if (sl811->port1 & USB_PORT_STAT_RESET) goto error; - if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))) + if (!(sl811->port1 & USB_PORT_STAT_ENABLE)) goto error; DBG("suspend...\n"); @@ -1303,9 +1303,9 @@ sl811h_hub_control( port_power(sl811, 1); break; case USB_PORT_FEAT_RESET: - if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) + if (sl811->port1 & USB_PORT_STAT_SUSPEND) goto error; - if (!(sl811->port1 & (1 << USB_PORT_FEAT_POWER))) + if (!(sl811->port1 & USB_PORT_STAT_POWER)) break; /* 50 msec of reset/SE0 signaling, irqs blocked */ @@ -1314,7 +1314,7 @@ sl811h_hub_control( sl811->irq_enable); sl811->ctrl1 = SL11H_CTL1MASK_SE0; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); - sl811->port1 |= (1 << USB_PORT_FEAT_RESET); + sl811->port1 |= USB_PORT_STAT_RESET; mod_timer(&sl811->timer, jiffies + msecs_to_jiffies(50)); break; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index dd69df1e4558b651f0a19c4d98e10b37e3f0f933..325b47a267b9733e07a3de0abd5e03857437594d 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -205,27 +205,27 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* wPortChange bits */ if (temp & PORT_CSC) - status |= 1 << USB_PORT_FEAT_C_CONNECTION; + status |= USB_PORT_STAT_C_CONNECTION << 16; if (temp & PORT_PEC) - status |= 1 << USB_PORT_FEAT_C_ENABLE; + status |= USB_PORT_STAT_C_ENABLE << 16; if ((temp & PORT_OCC)) - status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; + status |= USB_PORT_STAT_C_OVERCURRENT << 16; /* * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific * changes */ if (temp & PORT_CONNECT) { - status |= 1 << USB_PORT_FEAT_CONNECTION; + status |= USB_PORT_STAT_CONNECTION; status |= xhci_port_speed(temp); } if (temp & PORT_PE) - status |= 1 << USB_PORT_FEAT_ENABLE; + status |= USB_PORT_STAT_ENABLE; if (temp & PORT_OC) - status |= 1 << USB_PORT_FEAT_OVER_CURRENT; + status |= USB_PORT_STAT_OVERCURRENT; if (temp & PORT_RESET) - status |= 1 << USB_PORT_FEAT_RESET; + status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) - status |= 1 << USB_PORT_FEAT_POWER; + status |= USB_PORT_STAT_POWER; xhci_dbg(xhci, "Get port status returned 0x%x\n", status); put_unaligned(cpu_to_le32(status), (__le32 *) buf); break; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 705cc4ad8737361400f106cc206e4e6cbc629384..ced6d9ea9af3f6f9dbb9cdf93e6a3b17793a3915 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -353,8 +353,7 @@ void musb_hnp_stop(struct musb *musb) * which cause occasional OPT A "Did not receive reset after connect" * errors. */ - musb->port1_status &= - ~(1 << USB_PORT_FEAT_C_CONNECTION); + musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16); } #endif @@ -530,8 +529,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb_writeb(mbase, MUSB_DEVCTL, devctl); } else { musb->port1_status |= - (1 << USB_PORT_FEAT_OVER_CURRENT) - | (1 << USB_PORT_FEAT_C_OVER_CURRENT); + USB_PORT_STAT_OVERCURRENT + | (USB_PORT_STAT_C_OVERCURRENT << 16); } break; default: diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 7775e1c0a215fd81b780bf54ba024845868f0fda..92e85e027cfb822c61b2b0a42fce9a4e0c4b61e3 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -183,8 +183,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset) void musb_root_disconnect(struct musb *musb) { - musb->port1_status = (1 << USB_PORT_FEAT_POWER) - | (1 << USB_PORT_FEAT_C_CONNECTION); + musb->port1_status = USB_PORT_STAT_POWER + | (USB_PORT_STAT_C_CONNECTION << 16); usb_hcd_poll_rh_status(musb_to_hcd(musb)); musb->is_active = 0;