提交 67c56364 编写于 作者: B Bartlomiej Zolnierkiewicz

ide: add request_sense_{pc,rq} to ide_drive_t

Add 'struct ide_atapi_pc request_sense_pc' and 'request request_sense_rq' to
ide_drive_t and use them instead of fields in struct ide_{floppy,tape}_obj.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 844b9468
......@@ -208,8 +208,8 @@ void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
static void idefloppy_retry_pc(ide_drive_t *drive)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct request *rq = &floppy->request_sense_rq;
struct ide_atapi_pc *pc = &floppy->request_sense_pc;
struct request *rq = &drive->request_sense_rq;
struct ide_atapi_pc *pc = &drive->request_sense_pc;
(void)ide_read_error(drive);
ide_floppy_create_request_sense_cmd(pc);
......
......@@ -18,9 +18,6 @@ typedef struct ide_floppy_obj {
/* used for blk_{fs,pc}_request() requests */
struct ide_atapi_pc queued_pc;
struct ide_atapi_pc request_sense_pc;
struct request request_sense_rq;
/* Last error information */
u8 sense_key, asc, ascq;
/* delay this long before sending packet command */
......
......@@ -182,9 +182,6 @@ typedef struct ide_tape_obj {
/* used by REQ_IDETAPE_{READ,WRITE} requests */
struct ide_atapi_pc queued_pc;
struct ide_atapi_pc request_sense_pc;
struct request request_sense_rq;
/*
* DSC polling variables.
*
......@@ -600,8 +597,8 @@ static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
static void idetape_retry_pc(ide_drive_t *drive)
{
struct ide_tape_obj *tape = drive->driver_data;
struct request *rq = &tape->request_sense_rq;
struct ide_atapi_pc *pc = &tape->request_sense_pc;
struct request *rq = &drive->request_sense_rq;
struct ide_atapi_pc *pc = &drive->request_sense_pc;
(void)ide_read_error(drive);
idetape_create_request_sense_cmd(pc);
......
......@@ -322,7 +322,71 @@ typedef enum {
ide_started, /* a drive operation was started, handler was set */
} ide_startstop_t;
struct ide_atapi_pc;
/* ATAPI packet command flags */
enum {
/* set when an error is considered normal - no retry (ide-tape) */
PC_FLAG_ABORT = (1 << 0),
PC_FLAG_SUPPRESS_ERROR = (1 << 1),
PC_FLAG_WAIT_FOR_DSC = (1 << 2),
PC_FLAG_DMA_OK = (1 << 3),
PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
PC_FLAG_DMA_ERROR = (1 << 5),
PC_FLAG_WRITING = (1 << 6),
/* command timed out */
PC_FLAG_TIMEDOUT = (1 << 7),
};
/*
* With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
* This is used for several packet commands (not for READ/WRITE commands).
*/
#define IDE_PC_BUFFER_SIZE 256
struct ide_atapi_pc {
/* actual packet bytes */
u8 c[12];
/* incremented on each retry */
int retries;
int error;
/* bytes to transfer */
int req_xfer;
/* bytes actually transferred */
int xferred;
/* data buffer */
u8 *buf;
/* current buffer position */
u8 *cur_pos;
int buf_size;
/* missing/available data on the current buffer */
int b_count;
/* the corresponding request */
struct request *rq;
unsigned long flags;
/*
* those are more or less driver-specific and some of them are subject
* to change/removal later.
*/
u8 pc_buf[IDE_PC_BUFFER_SIZE];
/* idetape only */
struct idetape_bh *bh;
char *b_data;
/* idescsi only for now */
struct scatterlist *sg;
unsigned int sg_cnt;
struct scsi_cmnd *scsi_cmd;
void (*done) (struct scsi_cmnd *);
unsigned long timeout;
};
struct ide_devset;
struct ide_driver_s;
......@@ -492,6 +556,9 @@ struct ide_drive_s {
void (*pc_callback)(struct ide_drive_s *, int);
unsigned long atapi_flags;
struct ide_atapi_pc request_sense_pc;
struct request request_sense_rq;
};
typedef struct ide_drive_s ide_drive_t;
......@@ -768,71 +835,6 @@ ide_decl_devset(pio_mode);
ide_decl_devset(unmaskirq);
ide_decl_devset(using_dma);
/* ATAPI packet command flags */
enum {
/* set when an error is considered normal - no retry (ide-tape) */
PC_FLAG_ABORT = (1 << 0),
PC_FLAG_SUPPRESS_ERROR = (1 << 1),
PC_FLAG_WAIT_FOR_DSC = (1 << 2),
PC_FLAG_DMA_OK = (1 << 3),
PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
PC_FLAG_DMA_ERROR = (1 << 5),
PC_FLAG_WRITING = (1 << 6),
/* command timed out */
PC_FLAG_TIMEDOUT = (1 << 7),
};
/*
* With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
* This is used for several packet commands (not for READ/WRITE commands).
*/
#define IDE_PC_BUFFER_SIZE 256
struct ide_atapi_pc {
/* actual packet bytes */
u8 c[12];
/* incremented on each retry */
int retries;
int error;
/* bytes to transfer */
int req_xfer;
/* bytes actually transferred */
int xferred;
/* data buffer */
u8 *buf;
/* current buffer position */
u8 *cur_pos;
int buf_size;
/* missing/available data on the current buffer */
int b_count;
/* the corresponding request */
struct request *rq;
unsigned long flags;
/*
* those are more or less driver-specific and some of them are subject
* to change/removal later.
*/
u8 pc_buf[IDE_PC_BUFFER_SIZE];
/* idetape only */
struct idetape_bh *bh;
char *b_data;
/* idescsi only for now */
struct scatterlist *sg;
unsigned int sg_cnt;
struct scsi_cmnd *scsi_cmd;
void (*done) (struct scsi_cmnd *);
unsigned long timeout;
};
#ifdef CONFIG_IDE_PROC_FS
/*
* /proc/ide interface
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册