Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 628a6048 编写于 作者: D David S. Miller
浏览文件
操作

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize

上级 9de79c12 11597885
隐藏空白更改
内联 并排
Showing with 1703 addition and 1471 deletion
MAINTAINERS
浏览文件 @ 628a6048
......@@ -117,20 +117,20 @@ Maintainers List (try to look for most precise areas first)
M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/3c505*
F: drivers/net/ethernet/i825xx/3c505*
3C59X NETWORK DRIVER
M: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/networking/vortex.txt
F: drivers/net/3c59x.c
F: drivers/net/ethernet/3com/3c59x.c
3CR990 NETWORK DRIVER
M: David Dillow <dave@thedillows.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/typhoon*
F: drivers/net/ethernet/3com/typhoon*
3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS)
M: Adam Radford <linuxraid@lsi.com>
......@@ -170,8 +170,7 @@ F: include/linux/serial_8250.h
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
L: netdev@vger.kernel.org
S: Orphan / Obsolete
F: drivers/net/*8390*
F: drivers/net/ax88796.c
F: drivers/net/ethernet/8390/
9P FILE SYSTEM
M: Eric Van Hensbergen <ericvh@gmail.com>
......@@ -214,7 +213,7 @@ ACENIC DRIVER
M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
S: Maintained
F: drivers/net/acenic*
F: drivers/net/ethernet/3com/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Feuerer <peter@piie.net>
......@@ -746,7 +745,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/mach-ebsa110/
F: drivers/net/arm/am79c961a.*
F: drivers/net/ethernet/amd/am79c961a.*
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
M: Daniel Ribeiro <drwyrm@gmail.com>
......@@ -1015,7 +1014,7 @@ F: arch/arm/include/asm/hardware/ioc.h
F: arch/arm/include/asm/hardware/iomd.h
F: arch/arm/include/asm/hardware/memc.h
F: arch/arm/mach-rpc/
F: drivers/net/arm/ether*
F: drivers/net/arm/ether3*
F: drivers/scsi/arm/
ARM/SHARK MACHINE SUPPORT
......@@ -1527,27 +1526,27 @@ BROADCOM B44 10/100 ETHERNET DRIVER
M: Gary Zambrano <zambrano@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/b44.*
F: drivers/net/ethernet/broadcom/b44.*
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bnx2.*
F: drivers/net/bnx2_*
F: drivers/net/ethernet/broadcom/bnx2.*
F: drivers/net/ethernet/broadcom/bnx2_*
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
M: Eilon Greenstein <eilong@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bnx2x/
F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Matt Carlson <mcarlson@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/tg3.*
F: drivers/net/ethernet/broadcom/tg3.*
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
M: Brett Rudley <brudley@broadcom.com>
......@@ -1995,7 +1994,7 @@ M: Divy Le Ray <divy@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb3/
F: drivers/net/ethernet/chelsio/cxgb3/
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
M: Steve Wise <swise@chelsio.com>
......@@ -2009,7 +2008,7 @@ M: Dimitris Michailidis <dm@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb4/
F: drivers/net/ethernet/chelsio/cxgb4/
CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
M: Steve Wise <swise@chelsio.com>
......@@ -2023,7 +2022,7 @@ M: Casey Leedom <leedom@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb4vf/
F: drivers/net/ethernet/chelsio/cxgb4vf/
STMMAC ETHERNET DRIVER
M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
......@@ -2511,7 +2510,7 @@ ETHEREXPRESS-16 NETWORK DRIVER
M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/eexpress.*
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@linux-foundation.org>
......@@ -3341,13 +3340,13 @@ M: Bruce Allan <bruce.w.allan@intel.com>
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
M: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
S: Supported
F: Documentation/networking/e100.txt
F: Documentation/networking/e1000.txt
......@@ -3357,14 +3356,7 @@ F: Documentation/networking/igbvf.txt
F: Documentation/networking/ixgb.txt
F: Documentation/networking/ixgbe.txt
F: Documentation/networking/ixgbevf.txt
F: drivers/net/e100.c
F: drivers/net/e1000/
F: drivers/net/e1000e/
F: drivers/net/igb/
F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
F: drivers/net/ixgbevf/
F: drivers/net/ethernet/intel/
INTEL MRST PMU DRIVER
M: Len Brown <len.brown@intel.com>
......@@ -4507,7 +4499,7 @@ M: Amit Kumar Salecha <amit.salecha@qlogic.com>
L: netdev@vger.kernel.org
W: http://www.qlogic.com
S: Supported
F: drivers/net/netxen/
F: drivers/net/ethernet/qlogic/netxen/
NFS, SUNRPC, AND LOCKD CLIENTS
M: Trond Myklebust <Trond.Myklebust@netapp.com>
......@@ -4941,7 +4933,7 @@ PCNET32 NETWORK DRIVER
M: Don Fry <pcnet32@frontier.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pcnet32.c
F: drivers/net/ethernet/amd/pcnet32.c
PCRYPT PARALLEL CRYPTO ENGINE
M: Steffen Klassert <steffen.klassert@secunet.com>
......@@ -5253,7 +5245,7 @@ M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/LICENSE.qla3xxx
F: drivers/net/qla3xxx.*
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Amit Kumar Salecha <amit.salecha@qlogic.com>
......@@ -5261,7 +5253,7 @@ M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/qlcnic/
F: drivers/net/ethernet/qlogic/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
......@@ -5269,7 +5261,7 @@ M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/qlge/
F: drivers/net/ethernet/qlogic/qlge/
QNX4 FILESYSTEM
M: Anders Larsen <al@alarsen.net>
......@@ -5877,7 +5869,7 @@ F: mm/sl?b.c
SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Odd Fixes
F: drivers/net/smc91x.*
F: drivers/net/ethernet/smsc/smc91x.*
SMM665 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
......@@ -5912,13 +5904,13 @@ M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: include/linux/smsc911x.h
F: drivers/net/smsc911x.*
F: drivers/net/ethernet/smsc/smsc911x.*
SMSC9420 PCI ETHERNET DRIVER
M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/smsc9420.*
F: drivers/net/ethernet/smsc/smsc9420.*
SN-IA64 (Itanium) SUB-PLATFORM
M: Jes Sorensen <jes@sgi.com>
......@@ -6568,7 +6560,7 @@ W: http://uclinux-h8.sourceforge.jp/
S: Supported
F: arch/h8300/
F: drivers/ide/ide-h8300.c
F: drivers/net/ne-h8300.c
F: drivers/net/ethernet/8390/ne-h8300.c
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
......
drivers/infiniband/hw/cxgb3/Makefile
浏览文件 @ 628a6048
ccflags-y := -Idrivers/net/cxgb3
ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb3
obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o
......
drivers/infiniband/hw/cxgb4/Makefile
浏览文件 @ 628a6048
ccflags-y := -Idrivers/net/cxgb4
ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb4
obj-$(CONFIG_INFINIBAND_CXGB4) += iw_cxgb4.o
......
drivers/net/Kconfig
浏览文件 @ 628a6048
......@@ -193,6 +193,8 @@ source "drivers/net/phy/Kconfig"
# Ethernet
#
source "drivers/net/ethernet/Kconfig"
menuconfig NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
depends on !UML
......@@ -235,22 +237,6 @@ config MACB
source "drivers/net/arm/Kconfig"
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS || SUPERH
select PHYLIB
select MDIO_BITBANG
help
AX88796 driver, using platform bus to provide
chip detection and resources
config AX88796_93CX6
bool "ASIX AX88796 external 93CX6 eeprom support"
depends on AX88796
select EEPROM_93CX6
help
Select this if your platform comes with an external 93CX6 eeprom.
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
......@@ -285,71 +271,6 @@ config BMAC
To compile this driver as a module, choose M here: the module
will be called bmac.
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called ariadne.
config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called a2065.
config HYDRA
tristate "Hydra support"
depends on ZORRO
select CRC32
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called hydra.
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
depends on ZORRO
select CRC32
help
This driver is for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called zorro8390.
config APNE
tristate "PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called apne.
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
depends on MAC
select CRC32
help
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on MAC
......@@ -385,86 +306,6 @@ config MACMACE
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
depends on MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel.
To compile this driver as a module, choose M here.
config ATARILANCE
tristate "Atari Lance support"
depends on ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on SUN3 || SUN3X
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
VME boards.
config HPLANCE
bool "HP on-board LANCE support"
depends on DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
help
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config SNI_82596
tristate "SNI RM ethernet"
depends on NET_ETHERNET && SNI_RM
help
Say Y here to support the on-board Intel 82596 ethernet controller
built into SNI RM machines.
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on NET_ETHERNET && MIKROTIK_RB532
......@@ -485,15 +326,6 @@ config XTENSA_XT2000_SONIC
help
This is the driver for the onboard card of the Xtensa XT2000 board.
config MIPS_AU1X00_ENET
tristate "MIPS AU1000 Ethernet support"
depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
help
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
......@@ -516,18 +348,6 @@ config SGI_O2MACE_ETH
tristate "SGI O2 MACE Fast Ethernet support"
depends on SGI_IP32=y
config STNIC
tristate "National DP83902AV support"
depends on SUPERH
select CRC32
help
Support for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network Interface Controller for Twisted Pair. This
is a 10Mbit/sec Ethernet controller. Product overview and specs at
<http://www.national.com/pf/DP/DP83902A.html>.
If unsure, say N.
config SH_ETH
tristate "Renesas SuperH Ethernet support"
depends on SUPERH && \
......@@ -543,19 +363,6 @@ config SH_ETH
This driver supporting CPUs are:
- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD Lance chipset, which is better known
via the NE2100 cards.
To compile this driver as a module, choose M here: the module
will be called sunlance.
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on SBUS || PCI
......@@ -614,236 +421,6 @@ config SUNVNET
help
Support for virtual network devices under Sun Logical Domains.
config NET_VENDOR_3COM
bool "3COM cards"
depends on ISA || EISA || MCA || PCI
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about 3COM cards. If you say Y, you will be asked for
your specific card in the following questions.
config EL1
tristate "3c501 \"EtherLink\" support"
depends on NET_VENDOR_3COM && ISA
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Also, consider buying a
new card, since the 3c501 is slow, broken, and obsolete: you will
have problems. Some people suggest to ping ("man ping") a nearby
machine every minute ("man cron") when using this card.
To compile this driver as a module, choose M here. The module
will be called 3c501.
config EL2
tristate "3c503 \"EtherLink II\" support"
depends on NET_VENDOR_3COM && ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c503.
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
---help---
Information about this network (Ethernet) card can be found in
<file:Documentation/networking/3c505.txt>. If you have a card of
this type, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c505.
config EL16
tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c507.
config EL3
tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
---help---
If you have a network (Ethernet) card belonging to the 3Com
EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
from <http://www.tldp.org/docs.html#howto>.
If your card is not working you may need to use the DOS
setup disk to disable Plug & Play mode, and to select the default
media type.
To compile this driver as a module, choose M here. The module
will be called 3c509.
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c515.
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
depends on NET_VENDOR_3COM && MCA_LEGACY
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c523.
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c527.
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on NET_VENDOR_3COM && (PCI || EISA)
select MII
---help---
This option enables driver support for a large number of 10Mbps and
10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
"Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
"Boomerang" (EtherLink XL 3c900 or 3c905) PCI
"Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
"Tornado" (3c905) PCI
"Hurricane" (3c555/3cSOHO) PCI
If you have such a card, say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>. More
specific information is in
<file:Documentation/networking/vortex.txt> and in the comments at
the beginning of <file:drivers/net/3c59x.c>.
To compile this support as a module, choose M here.
config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
depends on NET_VENDOR_3COM && PCI
select CRC32
---help---
This option enables driver support for the 3cr990 series of cards:
3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called typhoon.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
of this type.
To compile this driver as a module, choose M here: the module
will be called lance. This is recommended.
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
depends on ISA || MCA || EISA || MAC
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Western Digital cards. If you say Y, you will be
asked for your specific card in the following questions.
config WD80x3
tristate "WD80*3 support"
depends on NET_VENDOR_SMC && ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called wd.
config ULTRAMCA
tristate "SMC Ultra MCA support"
depends on NET_VENDOR_SMC && MCA
select CRC32
help
If you have a network (Ethernet) card of this type and are running
an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc-mca.
config ULTRA
tristate "SMC Ultra support"
depends on NET_VENDOR_SMC && ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Important: There have been many reports that, with some motherboards
mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
such as some BusLogic models) causes corruption problems with many
operating systems. The Linux smc-ultra driver has a work-around for
this but keep it in mind if you have such a SCSI card and have
problems.
To compile this driver as a module, choose M here. The module
will be called smc-ultra.
config ULTRA32
tristate "SMC Ultra32 EISA support"
depends on NET_VENDOR_SMC && EISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc-ultra32.
config BFIN_MAC
tristate "Blackfin on-chip MAC support"
depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
......@@ -890,39 +467,6 @@ config BFIN_MAC_USE_HWSTAMP
help
To support the IEEE 1588 Precision Time Protocol (PTP), select y here
config SMC9194
tristate "SMC 9194 support"
depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
select CRC32
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc9194.
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
depends on ARM || M32R || SUPERH || \
MIPS || BLACKFIN || MN10300 || COLDFIRE
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
compiled into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91x. If you want to compile it as a
module, say M here and read <file:Documentation/kbuild/modules.txt>.
config PXA168_ETH
tristate "Marvell pxa168 ethernet support"
depends on CPU_PXA168
......@@ -1037,50 +581,12 @@ config GRETH
help
Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
depends on ARM || SUPERH || MN10300
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module. The module will be
called smc911x. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.txt>
config SMSC911X
tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300
select CRC32
select MII
select PHYLIB
---help---
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smsc911x.
config SMSC911X_ARCH_HOOKS
def_bool n
depends on SMSC911X
help
If the arch enables this, it allows the arch to implement various
hooks for more comprehensive interrupt control and also to override
the source of the MAC address.
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on ISA
help
If you have a network (Ethernet) card belonging to this class, such
as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
as the NI5010, say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
......@@ -1100,28 +606,6 @@ config NI5010
To compile this driver as a module, choose M here. The module
will be called ni5010.
config NI52
tristate "NI5210 support"
depends on NET_VENDOR_RACAL && ISA
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni52.
config NI65
tristate "NI6510 support"
depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni65.
config DNET
tristate "Dave ethernet support (DNET)"
depends on NET_ETHERNET && HAS_IOMEM
......@@ -1147,19 +631,6 @@ config AT1700
To compile this driver as a module, choose M here. The module
will be called at1700.
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
depends on ISA || EISA || MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
To compile this driver as a module, choose M here. The module
will be called depca.
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
......@@ -1188,18 +659,6 @@ config NET_ISA
the remaining ISA network card questions. If you say Y, you will be
asked for your specific card in the following questions.
config E2100
tristate "Cabletron E21xx support"
depends on NET_ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called e2100.
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on NET_ISA
......@@ -1214,65 +673,6 @@ config EWRK3
To compile this driver as a module, choose M here. The module
will be called ewrk3.
config EEXPRESS
tristate "EtherExpress 16 support"
depends on NET_ISA
---help---
If you have an EtherExpress16 network (Ethernet) card, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that the Intel
EtherExpress16 card used to be regarded as a very poor choice
because the driver was very unreliable. We now have a new driver
that should do better.
To compile this driver as a module, choose M here. The module
will be called eexpress.
config EEXPRESS_PRO
tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
depends on NET_ISA
---help---
If you have a network (Ethernet) card of this type, say Y. This
driver supports Intel i82595{FX,TX} based boards. Note however
that the EtherExpress PRO/100 Ethernet card has its own separate
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called eepro.
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
depends on NET_ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called hp-plus.
config HPLAN
tristate "HP PCLAN (27245 and other 27xxx series) support"
depends on NET_ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called hp.
config LP486E
tristate "LP486E on board Ethernet"
depends on NET_ISA
help
Say Y here to support the 82596-based on-board Ethernet controller
for the Panther motherboard, which is one of the two shipped in the
Intel Professional Workstation.
config ETH16I
tristate "ICL EtherTeam 16i/32 support"
depends on NET_ISA
......@@ -1284,36 +684,6 @@ config ETH16I
To compile this driver as a module, choose M here. The module
will be called eth16i.
config NE2000
tristate "NE2000/NE1000 support"
depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Many Ethernet cards
without a specific driver are compatible with NE2000.
If you have a PCI NE2000 card however, say N here and Y to "PCI
NE2000 and clone support" under "EISA, VLB, PCI and on board
controllers" below. If you have a NE2000 card and are running on
an MCA system (a bus system used on some IBM PS/2 computers and
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
To compile this driver as a module, choose M here. The module
will be called ne.
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
help
The Zenith Z-Note notebook computer has a built-in network
(Ethernet) card, and this is the Linux driver for it. Note that the
IBM Thinkpad 300 is compatible with the Z-Note and is also supported
by this driver. Read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config SEEQ8005
tristate "SEEQ8005 support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL
......@@ -1325,18 +695,6 @@ config SEEQ8005
To compile this driver as a module, choose M here. The module
will be called seeq8005.
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
depends on MCA_LEGACY
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ne2.
config IBMLANA
tristate "IBM LAN Adapter/A support"
depends on MCA
......@@ -1378,32 +736,6 @@ config NET_PCI
will be asked for your specific card in the following questions. If
you are unsure, say Y.
config PCNET32
tristate "AMD PCnet32 PCI support"
depends on NET_PCI && PCI
select CRC32
select MII
help
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called pcnet32.
config AMD8111_ETH
tristate "AMD 8111 (new PCI lance) support"
depends on NET_PCI && PCI
select CRC32
select MII
help
If you have an AMD 8111-based PCI lance ethernet card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called amd8111e.
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
depends on NET_PCI && PCI
......@@ -1418,71 +750,16 @@ config ADAPTEC_STARFIRE
To compile this driver as a module, choose M here: the module
will be called starfire. This is recommended.
config AC3200
tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ac3200.
config KSZ884X_PCI
tristate "Micrel KSZ8841/2 PCI"
depends on NET_PCI && PCI
select MII
select CRC32
help
This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
To compile this driver as a module, choose M here. The module
will be called ksz884x.
config APRICOT
tristate "Apricot Xen-II on board Ethernet"
depends on NET_PCI && ISA
help
If you have a network (Ethernet) controller of this type, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called apricot.
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
help
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called b44.
# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
bool
depends on B44 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
default y
# Auto-select SSB PCICORE driver, if possible
config B44_PCICORE_AUTOSELECT
bool
depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
select SSB_DRIVER_PCICORE
default y
help
This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
config B44_PCI
bool
depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
default y
To compile this driver as a module, choose M here. The module
will be called ksz884x.
config FORCEDETH
tristate "nForce Ethernet support"
......@@ -1519,44 +796,6 @@ config TC35815
depends on NET_PCI && PCI && MIPS
select PHYLIB
config E100
tristate "Intel(R) PRO/100+ support"
depends on NET_PCI && PCI
select MII
---help---
This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
in the format 123456-001 (six digits hyphen three digits).
Use the above information and the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
to identify the adapter.
For the latest Intel PRO/100 network driver for Linux, see:
<http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
To compile this driver as a module, choose M here. The module
will be called e100.
config LNE390
tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called lne390.
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
......@@ -1577,50 +816,6 @@ config NATSEMI
More specific information and updates are available from
<http://www.scyld.com/network/natsemi.html>.
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
depends on NET_PCI && PCI
select CRC32
---help---
This driver is for NE2000 compatible PCI cards. It will not work
with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
support" below). If you have a PCI NE2000 network (Ethernet) card,
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver also works for the following NE2000 clone cards:
RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
To compile this driver as a module, choose M here. The module
will be called ne2k-pci.
config NE3210
tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that this driver
will NOT WORK for NE3200 cards as they are completely different.
To compile this driver as a module, choose M here. The module
will be called ne3210.
config ES3210
tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called es3210.
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
......@@ -1717,33 +912,6 @@ config SIS900
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
config EPIC100
tristate "SMC EtherPower II"
depends on NET_PCI && PCI
select CRC32
select MII
help
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
which is based on the SMC83c17x (EPIC/100).
More specific information and updates are available from
<http://www.scyld.com/network/epic100.html>.
config SMSC9420
tristate "SMSC LAN9420 PCI ethernet adapter support"
depends on NET_PCI && PCI
select CRC32
select PHYLIB
select SMSC_PHY
help
This is a driver for SMSC's LAN9420 PCI ethernet adapter.
Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module. The module will be
called smsc9420. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.txt>
config SUNDANCE
tristate "Sundance Alta support"
depends on NET_PCI && PCI
......@@ -1925,15 +1093,6 @@ config SGISEEQ
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
help
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD Lance chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
......@@ -1967,13 +1126,6 @@ config FEC_MPC52xx_MDIO
If not sure, enable.
If compiled as module, it will be called fec_mpc52xx_phy.
config NE_H8300
tristate "NE2000 compatible support for H8/300"
depends on H8300
help
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
config ATL2
tristate "Atheros L2 Fast Ethernet support"
depends on PCI
......@@ -1992,15 +1144,6 @@ config XILINX_EMACLITE
help
This driver supports the 10/100 Ethernet Lite from Xilinx.
config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support"
depends on BCM63XX
select MII
select PHYLIB
help
This driver supports the ethernet MACs in the Broadcom 63xx
MIPS chipset family (BCM63XX).
config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM
......@@ -2044,33 +1187,6 @@ menuconfig NETDEV_1000
if NETDEV_1000
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
---help---
Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
adapter. The driver allows for using the Jumbo Frame option (9000
bytes/frame) however it requires that your switches can handle this
as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
line.
To compile this driver as a module, choose M here: the
module will be called acenic.
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
depends on ACENIC
help
Say Y here if you only have Tigon II based AceNICs and want to leave
out support for the older Tigon I based cards which are no longer
being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
version)). This will reduce the size of the driver object by
app. 100KB. If you are not sure whether your card is a Tigon I or a
Tigon II, say N here.
The safe and default value for this is N.
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
......@@ -2085,47 +1201,6 @@ config DL2K
To compile this driver as a module, choose M here: the
module will be called dl2k.
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called e1000.
config E1000E
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
depends on PCI && (!SPARC32 || BROKEN)
select CRC32
---help---
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
use the regular e1000 driver For more information on how to
identify your adapter, go to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
To compile this driver as a module, choose M here. The module
will be called e1000e.
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
......@@ -2136,57 +1211,6 @@ config IP1000
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
config IGB
tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called igb.
config IGB_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
---help---
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config IGBVF
tristate "Intel(R) 82576 Virtual Function Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) 82576 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called igbvf.
source "drivers/net/ixp2000/Kconfig"
config NS83820
......@@ -2237,19 +1261,6 @@ config R8169
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
---help---
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
and BCM1480 chips.
To compile this driver as a module, choose M here: the module
will be called sb1250-mac.
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
......@@ -2343,39 +1354,6 @@ config VIA_VELOCITY
To compile this driver as a module, choose M here. The module
will be called via-velocity.
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
select PHYLIB
help
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
config BNX2
tristate "Broadcom NetXtremeII support"
depends on PCI
select CRC32
select FW_LOADER
help
This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
config CNIC
tristate "Broadcom CNIC support"
depends on PCI
select BNX2
select UIO
help
This driver supports offload features of Broadcom NetXtremeII
gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called cnic. This is recommended.
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
......@@ -2466,15 +1444,6 @@ config XILINX_LL_TEMAC
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
help
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qla3xxx.
config ATL1
tristate "Atheros/Attansic L1 Gigabit Ethernet support"
depends on PCI
......@@ -2583,92 +1552,6 @@ if NETDEV_10000
config MDIO
tristate
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
depends on PCI
select CRC32
select MDIO
help
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
performance tuning is in <file:Documentation/networking/cxgb.txt>.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb.
config CHELSIO_T1_1G
bool "Chelsio gigabit Ethernet support"
depends on CHELSIO_T1
help
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on PCI && INET
select FW_LOADER
select MDIO
help
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb3.
config CHELSIO_T4
tristate "Chelsio Communications T4 Ethernet support"
depends on PCI
select FW_LOADER
select MDIO
help
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4.
config CHELSIO_T4VF
tristate "Chelsio Communications T4 Virtual Function Ethernet support"
depends on PCI
help
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters with PCI-E SR-IOV Virtual Functions.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4vf.
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && INET && SPARSEMEM
......@@ -2685,88 +1568,6 @@ config ENIC
help
This enables the support for the Cisco VIC Ethernet card.
config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI && INET
select MDIO
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
To compile this driver as a module, choose M here. The module
will be called ixgbe.
config IXGBE_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
---help---
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config IXGBE_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on IXGBE && DCB
---help---
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If unsure, say N.
config IXGBEVF
tristate "Intel(R) 82599 Virtual Function Ethernet support"
depends on PCI_MSI
---help---
This driver supports Intel(R) 82599 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
<http://support.intel.com/support/network/sb/CS-008441.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/ixgbevf.txt>.
To compile this driver as a module, choose M here. The module
will be called ixgbevf. MSI-X interrupt support is required
for this driver to work correctly.
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
---help---
This driver supports Intel(R) PRO/10GbE family of adapters for
PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
instead. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/ixgb.txt>.
To compile this driver as a module, choose M here. The module
will be called ixgb.
config S2IO
tristate "Exar Xframe 10Gb Ethernet Adapter"
depends on PCI
......@@ -2827,13 +1628,6 @@ config MYRI10GE_DCA
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
select FW_LOADER
help
This enables the support for NetXen's Gigabit Ethernet card.
config NIU
tristate "Sun Neptune 10Gbit Ethernet support"
depends on PCI
......@@ -2881,35 +1675,6 @@ config TEHUTI
help
Tehuti Networks 10G Ethernet NIC
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
select MDIO
help
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
select FW_LOADER
help
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
config QLGE
tristate "QLogic QLGE 10Gb Ethernet Driver Support"
depends on PCI
help
This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qlge.
config BNA
tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
depends on PCI
......
drivers/net/Makefile
浏览文件 @ 628a6048
#
# Makefile for the Linux network (ethercard) device drivers.
# Makefile for the Linux network device drivers.
#
obj-$(CONFIG_MII) += mii.o
......@@ -10,19 +10,8 @@ obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
obj-$(CONFIG_IGB) += igb/
obj-$(CONFIG_IGBVF) += igbvf/
obj-$(CONFIG_IXGBE) += ixgbe/
obj-$(CONFIG_IXGBEVF) += ixgbevf/
obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_CHELSIO_T3) += cxgb3/
obj-$(CONFIG_CHELSIO_T4) += cxgb4/
obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
......@@ -56,7 +45,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_HAPPYMEAL) += sunhme.o
obj-$(CONFIG_SUNLANCE) += sunlance.o
obj-$(CONFIG_SUNQE) += sunqe.o
obj-$(CONFIG_SUNBMAC) += sunbmac.o
obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
......@@ -66,28 +54,15 @@ obj-$(CONFIG_SUNVNET) += sunvnet.o
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
obj-$(CONFIG_VORTEX) += 3c59x.o
obj-$(CONFIG_TYPHOON) += typhoon.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCNET32) += pcnet32.o
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
obj-$(CONFIG_SMSC9420) += smsc9420.o
obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_ACENIC) += acenic.o
obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_CNIC) += cnic.o
obj-$(CONFIG_BNX2X) += bnx2x/
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
......@@ -117,35 +92,13 @@ obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
endif
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390p.o
obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
obj-$(CONFIG_HPLAN) += hp.o 8390p.o
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
obj-$(CONFIG_E2100) += e2100.o 8390.o
obj-$(CONFIG_ES3210) += es3210.o 8390.o
obj-$(CONFIG_LNE390) += lne390.o 8390.o
obj-$(CONFIG_NE3210) += ne3210.o 8390.o
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_NE_H8300) += ne-h8300.o
obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
......@@ -154,9 +107,6 @@ obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
obj-$(CONFIG_QLA3XXX) += qla3xxx.o
obj-$(CONFIG_QLCNIC) += qlcnic/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
......@@ -180,59 +130,25 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DE600) += de600.o
obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_LANCE) += lance.o
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_EL1) += 3c501.o
obj-$(CONFIG_EL16) += 3c507.o
obj-$(CONFIG_ELMC) += 3c523.o
obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_ELMC_II) += 3c527.o
obj-$(CONFIG_EL3) += 3c509.o
obj-$(CONFIG_3C515) += 3c515.o
obj-$(CONFIG_EEXPRESS) += eexpress.o
obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_DEPCA) += depca.o
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_NI5010) += ni5010.o
obj-$(CONFIG_NI52) += ni52.o
obj-$(CONFIG_NI65) += ni65.o
obj-$(CONFIG_ELPLUS) += 3c505.o
obj-$(CONFIG_AC3200) += ac3200.o 8390.o
obj-$(CONFIG_APRICOT) += 82596.o
obj-$(CONFIG_LASI_82596) += lasi_82596.o
obj-$(CONFIG_SNI_82596) += sni_82596.o
obj-$(CONFIG_MVME16x_NET) += 82596.o
obj-$(CONFIG_BVME6000_NET) += 82596.o
obj-$(CONFIG_SC92031) += sc92031.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_HYDRA) += hydra.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
obj-$(CONFIG_MACMACE) += macmace.o
......@@ -242,14 +158,10 @@ obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_VXGE) += vxge/
obj-$(CONFIG_MYRI10GE) += myri10ge/
obj-$(CONFIG_SMC91X) += smc91x.o
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_SMSC911X) += smsc911x.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
......@@ -269,6 +181,7 @@ obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
......@@ -295,7 +208,6 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_FS_ENET) += fs_enet/
obj-$(CONFIG_NETXEN_NIC) += netxen/
obj-$(CONFIG_NIU) += niu.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_SFC) += sfc/
......
drivers/net/arm/Kconfig
浏览文件 @ 628a6048
......@@ -2,20 +2,6 @@
# Acorn Network device configuration
# These are for Acorn's Expansion card network interfaces
#
config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on ARM && ARCH_EBSA110
select CRC32
help
If you wish to compile a kernel for the EBSA-110, then you should
always answer Y to this.
config ARM_ETHER1
tristate "Acorn Ether1 support"
depends on ARM && ARCH_ACORN
help
If you have an Acorn system with one of these (AKA25) network cards,
you should say Y to this option if you wish to use it with Linux.
config ARM_ETHER3
tristate "Acorn/ANT Ether3 support"
......@@ -24,14 +10,6 @@ config ARM_ETHER3
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config ARM_ETHERH
tristate "I-cubed EtherH/ANT EtherM support"
depends on ARM && ARCH_ACORN
select CRC32
help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on ARM && ARCH_AT91RM9200
......
drivers/net/arm/Makefile
浏览文件 @ 628a6048
......@@ -3,10 +3,7 @@
# Makefile for the ARM network device drivers
#
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
......
drivers/net/ethernet/3com/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# 3Com Ethernet device configuration
#
config NET_VENDOR_3COM
bool "3Com devices"
depends on ISA || EISA || MCA || PCI || PCMCIA
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about 3Com cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_3COM
config EL1
tristate "3c501 \"EtherLink\" support"
depends on ISA
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Also, consider buying a
new card, since the 3c501 is slow, broken, and obsolete: you will
have problems. Some people suggest to ping ("man ping") a nearby
machine every minute ("man cron") when using this card.
To compile this driver as a module, choose M here. The module
will be called 3c501.
config EL3
tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
depends on (ISA || EISA || MCA)
---help---
If you have a network (Ethernet) card belonging to the 3Com
EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
from <http://www.tldp.org/docs.html#howto>.
If your card is not working you may need to use the DOS
setup disk to disable Plug & Play mode, and to select the default
media type.
To compile this driver as a module, choose M here. The module
will be called 3c509.
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on (ISA || EISA) && ISA_DMA_API
---help---
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c515.
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
depends on PCMCIA
---help---
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called 3c574_cs. If unsure, say N.
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
depends on PCMCIA
---help---
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called 3c589_cs. If unsure, say N.
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on (PCI || EISA)
select MII
---help---
This option enables driver support for a large number of 10Mbps and
10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
"Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
"Boomerang" (EtherLink XL 3c900 or 3c905) PCI
"Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
"Tornado" (3c905) PCI
"Hurricane" (3c555/3cSOHO) PCI
If you have such a card, say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>. More
specific information is in
<file:Documentation/networking/vortex.txt> and in the comments at
the beginning of <file:drivers/net/3c59x.c>.
To compile this support as a module, choose M here.
config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
depends on PCI
select CRC32
---help---
This option enables driver support for the 3cr990 series of cards:
3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called typhoon.
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
---help---
Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
adapter. The driver allows for using the Jumbo Frame option (9000
bytes/frame) however it requires that your switches can handle this
as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
line.
To compile this driver as a module, choose M here: the
module will be called acenic.
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
depends on ACENIC
---help---
Say Y here if you only have Tigon II based AceNICs and want to leave
out support for the older Tigon I based cards which are no longer
being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
version)). This will reduce the size of the driver object by
app. 100KB. If you are not sure whether your card is a Tigon I or a
Tigon II, say N here.
The safe and default value for this is N.
endif # NET_VENDOR_3COM
drivers/net/ethernet/3com/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the 3Com Ethernet device drivers
#
obj-$(CONFIG_EL1) += 3c501.o
obj-$(CONFIG_EL3) += 3c509.o
obj-$(CONFIG_3C515) += 3c515.o
obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
obj-$(CONFIG_VORTEX) += 3c59x.o
obj-$(CONFIG_ACENIC) += acenic.o
obj-$(CONFIG_TYPHOON) += typhoon.o
drivers/net/ethernet/8390/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# 8390 device configuration
#
config NET_VENDOR_8390
bool "National Semi-conductor 8390 devices"
depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \
MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \
ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Western Digital cards. If you say Y, you will be
asked for your specific card in the following questions.
if NET_VENDOR_8390
config EL2
tristate "3c503 \"EtherLink II\" support"
depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c503.
config AC3200
tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
depends on PCI && (ISA || EISA) && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ac3200.
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
depends on PCMCIA
---help---
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
nearly NE2000 compatible but need a separate driver due to a few
misfeatures.
To compile this driver as a module, choose M here: the module will be
called axnet_cs. If unsure, say N.
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on (ARM || MIPS || SUPERH)
select PHYLIB
select MDIO_BITBANG
---help---
AX88796 driver, using platform bus to provide
chip detection and resources
config AX88796_93CX6
bool "ASIX AX88796 external 93CX6 eeprom support"
depends on AX88796
select EEPROM_93CX6
---help---
Select this if your platform comes with an external 93CX6 eeprom.
config E2100
tristate "Cabletron E21xx support"
depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called e2100.
config ES3210
tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
depends on PCI && EISA && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called es3210.
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called hp-plus.
config HPLAN
tristate "HP PCLAN (27245 and other 27xxx series) support"
depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called hp.
config HYDRA
tristate "Hydra support"
depends on ZORRO
select CRC32
---help---
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called hydra.
config ARM_ETHERH
tristate "I-cubed EtherH/ANT EtherM support"
depends on ARM && ARCH_ACORN
select CRC32
---help---
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config LNE390
tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
depends on PCI && EISA && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called lne390.
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
depends on MAC
select CRC32
---help---
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config NE2000
tristate "NE2000/NE1000 support"
depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Many Ethernet cards
without a specific driver are compatible with NE2000.
If you have a PCI NE2000 card however, say N here and Y to "PCI
NE2000 and clone support" under "EISA, VLB, PCI and on board
controllers" below. If you have a NE2000 card and are running on
an MCA system (a bus system used on some IBM PS/2 computers and
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
To compile this driver as a module, choose M here. The module
will be called ne.
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
depends on MCA_LEGACY
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ne2.
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
depends on PCI
select CRC32
---help---
This driver is for NE2000 compatible PCI cards. It will not work
with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
support" below). If you have a PCI NE2000 network (Ethernet) card,
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver also works for the following NE2000 clone cards:
RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
To compile this driver as a module, choose M here. The module
will be called ne2k-pci.
config APNE
tristate "PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
select CRC32
---help---
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called apne.
config NE3210
tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
depends on PCI && EISA && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that this driver
will NOT WORK for NE3200 cards as they are completely different.
To compile this driver as a module, choose M here. The module
will be called ne3210.
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
depends on PCMCIA
select CRC32
---help---
Say Y here if you intend to attach an NE2000 compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
config NE_H8300
tristate "NE2000 compatible support for H8/300"
depends on H8300
---help---
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
config STNIC
tristate "National DP83902AV support"
depends on SUPERH
select CRC32
---help---
Support for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network Interface Controller for Twisted Pair. This
is a 10Mbit/sec Ethernet controller. Product overview and specs at
<http://www.national.com/pf/DP/DP83902A.html>.
If unsure, say N.
config ULTRAMCA
tristate "SMC Ultra MCA support"
depends on MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type and are running
an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc-mca.
config ULTRA
tristate "SMC Ultra support"
depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Important: There have been many reports that, with some motherboards
mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
such as some BusLogic models) causes corruption problems with many
operating systems. The Linux smc-ultra driver has a work-around for
this but keep it in mind if you have such a SCSI card and have
problems.
To compile this driver as a module, choose M here. The module
will be called smc-ultra.
config ULTRA32
tristate "SMC Ultra32 EISA support"
depends on EISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc-ultra32.
config WD80x3
tristate "WD80*3 support"
depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called wd.
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
depends on ZORRO
select CRC32
---help---
This driver is for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called zorro8390.
endif # NET_VENDOR_8390
drivers/net/ethernet/8390/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the 8390 network device drivers.
#
obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_AC3200) += ac3200.o 8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_E2100) += e2100.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390p.o
obj-$(CONFIG_ES3210) += es3210.o 8390.o
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
obj-$(CONFIG_HPLAN) += hp.o 8390p.o
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
obj-$(CONFIG_LNE390) += lne390.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_NE3210) += ne3210.o 8390.o
obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
drivers/net/pcmcia/axnet_cs.c → drivers/net/ethernet/8390/axnet_cs.c
浏览文件 @ 628a6048
......@@ -38,7 +38,7 @@
#include <linux/etherdevice.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include "../8390.h"
#include "8390.h"
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
......
drivers/net/arm/etherh.c → drivers/net/ethernet/8390/etherh.c
浏览文件 @ 628a6048
......@@ -65,7 +65,7 @@
static char version[] __initdata =
"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
#include "../lib8390.c"
#include "lib8390.c"
static unsigned int net_debug = NET_DEBUG;
......
drivers/net/pcmcia/pcnet_cs.c → drivers/net/ethernet/8390/pcnet_cs.c
浏览文件 @ 628a6048
......@@ -41,7 +41,7 @@
#include <linux/log2.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include "../8390.h"
#include "8390.h"
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
......
drivers/net/ethernet/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# Ethernet LAN device configuration
#
menuconfig ETHERNET
bool "Ethernet driver support"
depends on NET
default y
---help---
This section contains all the Ethernet device drivers.
if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
endif # ETHERNET
drivers/net/ethernet/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the Linux network Ethernet device drivers.
#
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
drivers/net/ethernet/amd/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# AMD network device configuration
#
config NET_VENDOR_AMD
bool "AMD devices"
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
(ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
---help---
If you have a network (Ethernet) chipset belonging to this class,
say Y.
Note that the answer to this question does not directly affect
the kernel: saying N will just case the configurator to skip all
the questions regarding AMD chipsets. If you say Y, you will be asked
for your specific chipset/driver in the following questions.
if NET_VENDOR_AMD
config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
---help---
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called a2065.
config AMD8111_ETH
tristate "AMD 8111 (new PCI LANCE) support"
depends on PCI
select CRC32
select MII
---help---
If you have an AMD 8111-based PCI LANCE ethernet card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called amd8111e.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
of this type.
To compile this driver as a module, choose M here: the module
will be called lance. This is recommended.
config PCNET32
tristate "AMD PCnet32 PCI support"
depends on PCI
select CRC32
select MII
---help---
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called pcnet32.
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
---help---
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called ariadne.
config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on ARM && ARCH_EBSA110
select CRC32
---help---
If you wish to compile a kernel for the EBSA-110, then you should
always answer Y to this.
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
---help---
Say Y to include support for several Atari Ethernet adapters based
on the AMD LANCE chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
---help---
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD LANCE chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
depends on (ISA || EISA || MCA)
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
To compile this driver as a module, choose M here. The module
will be called depca.
config HPLANCE
bool "HP on-board LANCE support"
depends on DIO
select CRC32
---help---
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config MIPS_AU1X00_ENET
tristate "MIPS AU1000 Ethernet support"
depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
---help---
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config MVME147_NET
tristate "MVME147 (LANCE) Ethernet support"
depends on MVME147
select CRC32
---help---
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
depends on PCMCIA
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called nmclan_cs. If unsure, say N.
config NI65
tristate "NI6510 support"
depends on ISA && ISA_DMA_API
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni65.
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on (SUN3 || SUN3X)
---help---
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
---help---
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD LANCE chipset, which is better known
via the NE2100 cards.
To compile this driver as a module, choose M here: the module
will be called sunlance.
endif # NET_VENDOR_AMD
drivers/net/ethernet/amd/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the AMD network device drivers.
#
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_DEPCA) += depca.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_LANCE) += lance.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
obj-$(CONFIG_NI65) += ni65.o
obj-$(CONFIG_PCNET32) += pcnet32.o
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
obj-$(CONFIG_SUNLANCE) += sunlance.o
drivers/net/ethernet/broadcom/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# Broadcom device configuration
#
config NET_VENDOR_BROADCOM
bool "Broadcom devices"
depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
SIBYTE_SB1xxx_SOC
---help---
If you have a network (Ethernet) chipset belonging to this class,
say Y.
Note that the answer to this question does not directly affect
the kernel: saying N will just case the configurator to skip all
the questions regarding AMD chipsets. If you say Y, you will be asked
for your specific chipset/driver in the following questions.
if NET_VENDOR_BROADCOM
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
---help---
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called b44.
# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
bool
depends on B44 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
default y
# Auto-select SSB PCICORE driver, if possible
config B44_PCICORE_AUTOSELECT
bool
depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
select SSB_DRIVER_PCICORE
default y
config B44_PCI
bool
depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
default y
config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support"
depends on BCM63XX
select MII
select PHYLIB
help
This driver supports the ethernet MACs in the Broadcom 63xx
MIPS chipset family (BCM63XX).
config BNX2
tristate "Broadcom NetXtremeII support"
depends on PCI
select CRC32
select FW_LOADER
---help---
This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
config CNIC
tristate "Broadcom CNIC support"
depends on PCI
select BNX2
select UIO
---help---
This driver supports offload features of Broadcom NetXtremeII
gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called cnic. This is recommended.
config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
---help---
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
and BCM1480 chips.
To compile this driver as a module, choose M here: the module
will be called sb1250-mac.
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
select PHYLIB
---help---
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
select MDIO
---help---
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
endif # NET_VENDOR_BROADCOM
drivers/net/ethernet/broadcom/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the Broadcom network device drivers.
#
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_CNIC) += cnic.o
obj-$(CONFIG_BNX2X) += bnx2x/
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_TIGON3) += tg3.o
drivers/net/cnic.c → drivers/net/ethernet/broadcom/cnic.c
浏览文件 @ 628a6048
......@@ -45,8 +45,8 @@
#include "bnx2x/bnx2x_reg.h"
#include "bnx2x/bnx2x_fw_defs.h"
#include "bnx2x/bnx2x_hsi.h"
#include "../scsi/bnx2i/57xx_iscsi_constants.h"
#include "../scsi/bnx2i/57xx_iscsi_hsi.h"
#include "../../../scsi/bnx2i/57xx_iscsi_constants.h"
#include "../../../scsi/bnx2i/57xx_iscsi_hsi.h"
#include "cnic.h"
#include "cnic_defs.h"
......
drivers/net/ethernet/chelsio/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# Chelsio device configuration
#
config NET_VENDOR_CHELSIO
bool "Chelsio devices"
depends on PCI || INET
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Chelsio devices. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_CHELSIO
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
depends on PCI
select CRC32
select MDIO
---help---
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
performance tuning is in <file:Documentation/networking/cxgb.txt>.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb.
config CHELSIO_T1_1G
bool "Chelsio gigabit Ethernet support"
depends on CHELSIO_T1
---help---
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on PCI && INET
select FW_LOADER
select MDIO
---help---
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb3.
config CHELSIO_T4
tristate "Chelsio Communications T4 Ethernet support"
depends on PCI
select FW_LOADER
select MDIO
---help---
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4.
config CHELSIO_T4VF
tristate "Chelsio Communications T4 Virtual Function Ethernet support"
depends on PCI
---help---
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters with PCI-E SR-IOV Virtual Functions.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4vf.
endif # NET_VENDOR_CHELSIO
drivers/net/ethernet/chelsio/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the Chelsio network device drivers.
#
obj-$(CONFIG_CHELSIO_T1) += cxgb/
obj-$(CONFIG_CHELSIO_T3) += cxgb3/
obj-$(CONFIG_CHELSIO_T4) += cxgb4/
obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
drivers/net/ethernet/i825xx/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# Intel 82596/82593/82596 network device configuration
#
config NET_VENDOR_I825XX
bool "Intel (82586/82593/82596) devices"
depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
GSC || BVME6000 || MVME16x || EXPERIMENTAL)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question does not directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about these devices. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_I825XX
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
depends on ISA && ISA_DMA_API
---help---
Information about this network (Ethernet) card can be found in
<file:Documentation/networking/3c505.txt>. If you have a card of
this type, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c505.
config EL16
tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
depends on ISA && EXPERIMENTAL
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c507.
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
depends on MCA_LEGACY
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c523.
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
depends on MCA && MCA_LEGACY
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c527.
config ARM_ETHER1
tristate "Acorn Ether1 support"
depends on ARM && ARCH_ACORN
---help---
If you have an Acorn system with one of these (AKA25) network cards,
you should say Y to this option if you wish to use it with Linux.
config APRICOT
tristate "Apricot Xen-II on board Ethernet"
depends on ISA
---help---
If you have a network (Ethernet) controller of this type, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called apricot.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on BVME6000MVME16x
---help---
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel.
To compile this driver as a module, choose M here.
config EEXPRESS
tristate "EtherExpress 16 support"
depends on ISA
---help---
If you have an EtherExpress16 network (Ethernet) card, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that the Intel
EtherExpress16 card used to be regarded as a very poor choice
because the driver was very unreliable. We now have a new driver
that should do better.
To compile this driver as a module, choose M here. The module
will be called eexpress.
config EEXPRESS_PRO
tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
depends on ISA
---help---
If you have a network (Ethernet) card of this type, say Y. This
driver supports Intel i82595{FX,TX} based boards. Note however
that the EtherExpress PRO/100 Ethernet card has its own separate
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called eepro.
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
---help---
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config LP486E
tristate "LP486E on board Ethernet"
depends on ISA
---help---
Say Y here to support the 82596-based on-board Ethernet controller
for the Panther motherboard, which is one of the two shipped in the
Intel Professional Workstation.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on MVME16x
---help---
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config NI52
tristate "NI5210 support"
depends on ISA
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni52.
config SNI_82596
tristate "SNI RM ethernet"
depends on SNI_RM
---help---
Say Y here to support the on-board Intel 82596 ethernet controller
built into SNI RM machines.
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on SUN3
---help---
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
VME boards.
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ISA_DMA_API
---help---
The Zenith Z-Note notebook computer has a built-in network
(Ethernet) card, and this is the Linux driver for it. Note that the
IBM Thinkpad 300 is compatible with the Z-Note and is also supported
by this driver. Read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
endif # NET_VENDOR_I825XX
drivers/net/ethernet/i825xx/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the Intel 82586/82593/82596 chipset device drivers.
#
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_EEXPRESS) += eexpress.o
obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_ELPLUS) += 3c505.o
obj-$(CONFIG_EL16) += 3c507.o
obj-$(CONFIG_ELMC) += 3c523.o
obj-$(CONFIG_ELMC_II) += 3c527.o
obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_NI52) += ni52.o
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_APRICOT) += 82596.o
obj-$(CONFIG_LASI_82596) += lasi_82596.o
obj-$(CONFIG_SNI_82596) += sni_82596.o
obj-$(CONFIG_MVME16x_NET) += 82596.o
obj-$(CONFIG_BVME6000_NET) += 82596.o
drivers/net/ethernet/intel/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# Intel network device configuration
#
config NET_VENDOR_INTEL
bool "Intel devices"
depends on PCI || PCI_MSI
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Intel cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_INTEL
config E100
tristate "Intel(R) PRO/100+ support"
depends on PCI
select MII
---help---
This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
in the format 123456-001 (six digits hyphen three digits).
Use the above information and the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
to identify the adapter.
For the latest Intel PRO/100 network driver for Linux, see:
<http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
To compile this driver as a module, choose M here. The module
will be called e100.
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called e1000.
config E1000E
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
depends on PCI && (!SPARC32 || BROKEN)
select CRC32
---help---
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
use the regular e1000 driver For more information on how to
identify your adapter, go to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
To compile this driver as a module, choose M here. The module
will be called e1000e.
config IGB
tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called igb.
config IGB_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
---help---
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config IGBVF
tristate "Intel(R) 82576 Virtual Function Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) 82576 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called igbvf.
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
---help---
This driver supports Intel(R) PRO/10GbE family of adapters for
PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
instead. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/ixgb.txt>.
To compile this driver as a module, choose M here. The module
will be called ixgb.
config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI && INET
select MDIO
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
To compile this driver as a module, choose M here. The module
will be called ixgbe.
config IXGBE_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
---help---
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config IXGBE_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on IXGBE && DCB
---help---
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If unsure, say N.
config IXGBEVF
tristate "Intel(R) 82599 Virtual Function Ethernet support"
depends on PCI_MSI
---help---
This driver supports Intel(R) 82599 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
<http://support.intel.com/support/network/sb/CS-008441.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/ixgbevf.txt>.
To compile this driver as a module, choose M here. The module
will be called ixgbevf. MSI-X interrupt support is required
for this driver to work correctly.
endif # NET_VENDOR_INTEL
drivers/net/ethernet/intel/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the Intel network device drivers.
#
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IGB) += igb/
obj-$(CONFIG_IGBVF) += igbvf/
obj-$(CONFIG_IXGBE) += ixgbe/
obj-$(CONFIG_IXGBEVF) += ixgbevf/
obj-$(CONFIG_IXGB) += ixgb/
drivers/net/e1000e/Makefile → drivers/net/ethernet/intel/e1000e/Makefile
浏览文件 @ 628a6048
......@@ -32,6 +32,6 @@
obj-$(CONFIG_E1000E) += e1000e.o
e1000e-objs := 82571.o ich8lan.o es2lan.o \
e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
lib.o phy.o param.o ethtool.o netdev.o
drivers/net/ethernet/qlogic/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# QLogic network device configuration
#
config NET_VENDOR_QLOGIC
bool "QLogic devices"
depends on PCI
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about QLogic cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_QLOGIC
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
---help---
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qla3xxx.
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
select FW_LOADER
---help---
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
config QLGE
tristate "QLogic QLGE 10Gb Ethernet Driver Support"
depends on PCI
---help---
This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qlge.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
select FW_LOADER
---help---
This enables the support for NetXen's Gigabit Ethernet card.
endif # NET_VENDOR_QLOGIC
drivers/net/ethernet/qlogic/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the QLogic network device drivers.
#
obj-$(CONFIG_QLA3XXX) += qla3xxx.o
obj-$(CONFIG_QLCNIC) += qlcnic/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_NETXEN_NIC) += netxen/
drivers/net/ethernet/smsc/Kconfig 0 → 100644
浏览文件 @ 628a6048
#
# Western Digital/SMC network device configuration
#
config NET_VENDOR_SMSC
bool "SMC (SMSC)/Western Digital devices"
depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \
BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about SMC/Western Digital cards. If you say Y, you will
be asked for your specific card in the following questions.
if NET_VENDOR_SMSC
config SMC9194
tristate "SMC 9194 support"
depends on (ISA || MAC && BROKEN)
select CRC32
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc9194.
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
MN10300 || COLDFIRE)
---help---
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
compiled into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91x. If you want to compile it as a
module, say M here and read <file:Documentation/kbuild/modules.txt>.
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
depends on PCMCIA
select CRC32
select MII
---help---
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called smc91c92_cs. If unsure, say N.
config EPIC100
tristate "SMC EtherPower II"
depends on PCI
select CRC32
select MII
---help---
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
which is based on the SMC83c17x (EPIC/100).
More specific information and updates are available from
<http://www.scyld.com/network/epic100.html>.
config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
depends on (ARM || SUPERH || MN10300)
---help---
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module. The module will be
called smc911x. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.txt>
config SMSC911X
tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
depends on (ARM || SUPERH || BLACKFIN || MIPS || MN10300)
select CRC32
select MII
select PHYLIB
---help---
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smsc911x.
config SMSC911X_ARCH_HOOKS
def_bool n
depends on SMSC911X
---help---
If the arch enables this, it allows the arch to implement various
hooks for more comprehensive interrupt control and also to override
the source of the MAC address.
config SMSC9420
tristate "SMSC LAN9420 PCI ethernet adapter support"
depends on PCI
select CRC32
select PHYLIB
select SMSC_PHY
---help---
This is a driver for SMSC's LAN9420 PCI ethernet adapter.
Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module. The module will be
called smsc9420. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.txt>
endif # NET_VENDOR_SMSC
drivers/net/ethernet/smsc/Makefile 0 → 100644
浏览文件 @ 628a6048
#
# Makefile for the SMSC network device drivers.
#
obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_SMC91X) += smc91x.o
obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
obj-$(CONFIG_EPIC100) += epic100.o
obj-$(CONFIG_SMSC9420) += smsc9420.o
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_SMSC911X) += smsc911x.o
drivers/net/pcmcia/Kconfig
浏览文件 @ 628a6048
......@@ -21,24 +21,6 @@ menuconfig NET_PCMCIA
if NET_PCMCIA && PCMCIA
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called 3c589_cs. If unsure, say N.
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called 3c574_cs. If unsure, say N.
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
select CRC32
......@@ -49,36 +31,6 @@ config PCMCIA_FMVJ18X
To compile this driver as a module, choose M here: the module will be
called fmvj18x_cs. If unsure, say N.
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called nmclan_cs. If unsure, say N.
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
select CRC32
select MII
help
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called smc91c92_cs. If unsure, say N.
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
help
......@@ -88,17 +40,6 @@ config PCMCIA_XIRC2PS
To compile this driver as a module, choose M here: the module will be
called xirc2ps_cs. If unsure, say N.
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
---help---
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
nearly NE2000 compatible but need a separate driver due to a few
misfeatures.
To compile this driver as a module, choose M here: the module will be
called axnet_cs. If unsure, say N.
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
depends on ARCNET_COM20020
......
drivers/net/pcmcia/Makefile
浏览文件 @ 628a6048
......@@ -3,14 +3,8 @@
#
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o
obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o
obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o
drivers/scsi/bnx2fc/bnx2fc.h
浏览文件 @ 628a6048
......@@ -58,7 +58,7 @@
#include "57xx_hsi_bnx2fc.h"
#include "bnx2fc_debug.h"
#include "../../net/cnic_if.h"
#include "../../net/ethernet/broadcom/cnic_if.h"
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
......
drivers/scsi/bnx2i/bnx2i.h
浏览文件 @ 628a6048
......@@ -40,7 +40,7 @@
#include <scsi/libiscsi.h>
#include <scsi/scsi_transport_iscsi.h>
#include "../../net/cnic_if.h"
#include "../../net/ethernet/broadcom/cnic_if.h"
#include "57xx_iscsi_hsi.h"
#include "57xx_iscsi_constants.h"
......
drivers/scsi/cxgbi/cxgb3i/Kbuild
浏览文件 @ 628a6048
EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3
EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb3
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
drivers/scsi/cxgbi/cxgb4i/Kbuild
浏览文件 @ 628a6048
EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb4
EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4
obj-$(CONFIG_SCSI_CXGB4_ISCSI) += cxgb4i.o
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或