提交 568c24ad 编写于 作者: A Alan Cox 提交者: Greg Kroah-Hartman

USB: serial: ark3116.c: Mixed fixups

o	Don't parse the cflag for baud rates, its not valid to do so
	any more and this driver got it wrong anyway
o	Don't do clever termios change checks in drivers and get them
	wrong (arguably we should do some smart ones in the tty core but
	stty to change nothing is *not* a common or critical path

I don't have the hardware so if you can test this carefully please do. I
thought fixing it up this far was better than marking it and other bits of
USB serial && BROKEN
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 9e85c5f6
......@@ -172,7 +172,7 @@ static void ark3116_set_termios(struct usb_serial_port *port,
dbg("%s - port %d", __FUNCTION__, port->number);
if ((!port->tty) || (!port->tty->termios)) {
if (!port->tty || !port->tty->termios) {
dbg("%s - no tty structures", __FUNCTION__);
return;
}
......@@ -188,16 +188,6 @@ static void ark3116_set_termios(struct usb_serial_port *port,
cflag = port->tty->termios->c_cflag;
/* check that they really want us to change something: */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag))) {
dbg("%s - nothing to change...", __FUNCTION__);
return;
}
}
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc");
......@@ -220,7 +210,7 @@ static void ark3116_set_termios(struct usb_serial_port *port,
dbg("setting CS7");
break;
default:
err("CSIZE was set but not CS5-CS8, using CS8!");
dbg("CSIZE was set but not CS5-CS8, using CS8!");
/* fall through */
case CS8:
config |= 0x03;
......@@ -251,38 +241,33 @@ static void ark3116_set_termios(struct usb_serial_port *port,
}
/* set baudrate */
baud = 0;
switch (cflag & CBAUD) {
case B0:
err("can't set 0 baud, using 9600 instead");
break;
case B75: baud = 75; break;
case B150: baud = 150; break;
case B300: baud = 300; break;
case B600: baud = 600; break;
case B1200: baud = 1200; break;
case B1800: baud = 1800; break;
case B2400: baud = 2400; break;
case B4800: baud = 4800; break;
case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
case B57600: baud = 57600; break;
case B115200: baud = 115200; break;
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
default:
dbg("does not support the baudrate requested (fix it)");
baud = tty_get_baud_rate(port->tty);
switch (baud) {
case 75:
case 150:
case 300:
case 600:
case 1200:
case 1800:
case 2400:
case 4800:
case 9600:
case 19200:
case 38400:
case 57600:
case 115200:
case 230400:
case 460800:
break;
}
/* set 9600 as default (if given baudrate is invalid for example) */
if (baud == 0)
default:
baud = 9600;
}
/*
* found by try'n'error, be careful, maybe there are other options
* for multiplicator etc!
* for multiplicator etc! (3.5 for example)
*/
if (baud == 460800)
/* strange, for 460800 the formula is wrong
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册