提交 29e33226 编写于 作者: V Vineet Gupta

ARC: mm: HIGHMEM: populate high memory from DT

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
上级 45890f6d
......@@ -11,8 +11,16 @@
/ {
compatible = "snps,nsim_hs";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&core_intc>;
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */
0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */
};
chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
};
......@@ -26,8 +34,8 @@
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
/* only perip space at end of low mem accessible */
ranges = <0x80000000 0x0 0x80000000 0x80000000>;
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
......
......@@ -15,6 +15,7 @@
#endif
#include <linux/swap.h>
#include <linux/module.h>
#include <linux/highmem.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
......@@ -27,6 +28,12 @@ EXPORT_SYMBOL(empty_zero_page);
static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
#endif
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
......@@ -41,10 +48,22 @@ early_param("mem", setup_mem_sz);
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
low_mem_sz = size;
int in_use = 0;
if (!low_mem_sz) {
BUG_ON(base != low_mem_start);
low_mem_sz = size;
in_use = 1;
} else {
#ifdef CONFIG_HIGHMEM
high_mem_start = base;
high_mem_sz = size;
in_use = 1;
#endif
}
pr_info("Memory @ %llx of %ldM\n", base, TO_MB(size));
pr_info("Memory @ %llx [%lldM] %s\n",
base, TO_MB(size), !in_use ? "Not used":"");
}
#ifdef CONFIG_BLK_DEV_INITRD
......@@ -74,6 +93,7 @@ early_param("initrd", early_initrd);
void __init setup_arch_memory(void)
{
unsigned long zones_size[MAX_NR_ZONES];
unsigned long zones_holes[MAX_NR_ZONES];
init_mm.start_code = (unsigned long)_text;
init_mm.end_code = (unsigned long)_etext;
......@@ -86,9 +106,26 @@ void __init setup_arch_memory(void)
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
max_mapnr = max_low_pfn - min_low_pfn;
#ifdef CONFIG_HIGHMEM
min_high_pfn = PFN_DOWN(high_mem_start);
max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
#endif
max_mapnr = max_pfn - min_low_pfn;
/*------------- bootmem allocator setup -----------------------*/
/*
* seed the bootmem allocator after any DT memory node parsing or
* "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
*
* Only low mem is added, otherwise we have crashes when allocating
* mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
* avail memory, ending in highmem with a > 32-bit address. However
* it then tries to memset it with a truncaed 32-bit handle, causing
* the crash
*/
memblock_add(low_mem_start, low_mem_sz);
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
......@@ -101,7 +138,17 @@ void __init setup_arch_memory(void)
/*----------------- node/zones setup --------------------------*/
memset(zones_size, 0, sizeof(zones_size));
memset(zones_holes, 0, sizeof(zones_holes));
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
zones_holes[ZONE_NORMAL] = 0;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
/* This handles the peripheral address space hole */
zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
#endif
/*
* We can't use the helper free_area_init(zones[]) because it uses
......@@ -112,9 +159,12 @@ void __init setup_arch_memory(void)
free_area_init_node(0, /* node-id */
zones_size, /* num pages per zone */
min_low_pfn, /* first pfn of node */
NULL); /* NO holes */
zones_holes); /* holes */
high_memory = (void *)end_mem;
#ifdef CONFIG_HIGHMEM
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
#endif
}
/*
......@@ -125,6 +175,14 @@ void __init setup_arch_memory(void)
*/
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
reset_all_zones_managed_pages();
for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
free_all_bootmem();
mem_init_print_info(NULL);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册