提交 02c981c0 编写于 作者: B Binghua Duan 提交者: Barry Song

ARM: CSR: Adding CSR SiRFprimaII board support

SiRFprimaII is the latest generation application processor from CSR’s
Multifunction SoC product family. Designed around an ARM cortex A9 core,
high-speed memory bus, advanced 3D accelerator and full-HD multi-format
video decoder, SiRFprimaII is able to meet the needs of complicated
applications for modern multifunction devices that require heavy concurrent
applications and fluid user experience. Integrated with GPS baseband,
analog and PMU, this new platform is designed to provide a cost effective
solution for Automotive and Consumer markets.

This patch adds the basic support for this SoC and EVB board based on device
tree. It is following the ZYNQ of Xilinx in some degree.
Signed-off-by: NBinghua Duan <Binghua.Duan@csr.com>
Signed-off-by: NRongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: NZhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: NYuping Luo <Yuping.Luo@csr.com>
Signed-off-by: NBin Shi <Bin.Shi@csr.com>
Signed-off-by: NHuayi Li <Huayi.Li@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
上级 f1bb20a8
prima2 "cb" evalutation board
Required root node properties:
- compatible = "sirf,prima2-cb", "sirf,prima2";
......@@ -879,6 +879,20 @@ config ARCH_VT8500
select HAVE_PWM
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
select CPU_V7
select GENERIC_TIME
select NO_IOPORT
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select USE_OF
select ZONE_DMA
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
endchoice
#
......
......@@ -169,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
......
/dts-v1/;
/ {
model = "SiRF Prima2 eVB";
compatible = "sirf,prima2-cb", "sirf,prima2";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
memory {
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
linux,stdout-path = &uart1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
/* from bootloader */
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
axi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x40000000 0x40000000 0x80000000>;
l2-cache-controller@80040000 {
compatible = "arm,pl310-cache";
reg = <0x80040000 0x1000>;
interrupts = <59>;
};
intc: interrupt-controller@80020000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "sirf,prima2-intc";
reg = <0x80020000 0x1000>;
};
sys-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x88000000 0x88000000 0x40000>;
clock-controller@88000000 {
compatible = "sirf,prima2-clkc";
reg = <0x88000000 0x1000>;
interrupts = <3>;
};
reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
};
};
mem-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90000000 0x90000000 0x10000>;
memory-controller@90000000 {
compatible = "sirf,prima2-memc";
reg = <0x90000000 0x10000>;
interrupts = <27>;
};
};
disp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90010000 0x90010000 0x30000>;
display@90010000 {
compatible = "sirf,prima2-lcd";
reg = <0x90010000 0x20000>;
interrupts = <30>;
};
vpp@90020000 {
compatible = "sirf,prima2-vpp";
reg = <0x90020000 0x10000>;
interrupts = <31>;
};
};
graphics-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x98000000 0x98000000 0x8000000>;
graphics@98000000 {
compatible = "powervr,sgx531";
reg = <0x98000000 0x8000000>;
interrupts = <6>;
};
};
multimedia-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa0000000 0xa0000000 0x8000000>;
multimedia@a0000000 {
compatible = "sirf,prima2-video-codec";
reg = <0xa0000000 0x8000000>;
interrupts = <5>;
};
};
dsp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa8000000 0xa8000000 0x2000000>;
dspif@a8000000 {
compatible = "sirf,prima2-dspif";
reg = <0xa8000000 0x10000>;
interrupts = <9>;
};
gps@a8010000 {
compatible = "sirf,prima2-gps";
reg = <0xa8010000 0x10000>;
interrupts = <7>;
};
dsp@a9000000 {
compatible = "sirf,prima2-dsp";
reg = <0xa9000000 0x1000000>;
interrupts = <8>;
};
};
peri-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0xb0000000 0x180000>;
timer@b0020000 {
compatible = "sirf,prima2-tick";
reg = <0xb0020000 0x1000>;
interrupts = <0>;
};
nand@b0030000 {
compatible = "sirf,prima2-nand";
reg = <0xb0030000 0x10000>;
interrupts = <41>;
};
audio@b0040000 {
compatible = "sirf,prima2-audio";
reg = <0xb0040000 0x10000>;
interrupts = <35>;
};
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x10000>;
interrupts = <17>;
};
uart1: uart@b0060000 {
cell-index = <1>;
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x10000>;
interrupts = <18>;
};
uart2: uart@b0070000 {
cell-index = <2>;
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x10000>;
interrupts = <19>;
};
usp0: usp@b0080000 {
cell-index = <0>;
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
};
usp1: usp@b0090000 {
cell-index = <1>;
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
};
usp2: usp@b00a0000 {
cell-index = <2>;
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
};
dmac0: dma-controller@b00b0000 {
cell-index = <0>;
compatible = "sirf,prima2-dmac";
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
};
dmac1: dma-controller@b0160000 {
cell-index = <1>;
compatible = "sirf,prima2-dmac";
reg = <0xb0160000 0x10000>;
interrupts = <13>;
};
vip@b00C0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
};
spi0: spi@b00d0000 {
cell-index = <0>;
compatible = "sirf,prima2-spi";
reg = <0xb00d0000 0x10000>;
interrupts = <15>;
};
spi1: spi@b0170000 {
cell-index = <1>;
compatible = "sirf,prima2-spi";
reg = <0xb0170000 0x10000>;
interrupts = <16>;
};
i2c0: i2c@b00e0000 {
cell-index = <0>;
compatible = "sirf,prima2-i2c";
reg = <0xb00e0000 0x10000>;
interrupts = <24>;
};
i2c1: i2c@b00f0000 {
cell-index = <1>;
compatible = "sirf,prima2-i2c";
reg = <0xb00f0000 0x10000>;
interrupts = <25>;
};
tsc@b0110000 {
compatible = "sirf,prima2-tsc";
reg = <0xb0110000 0x10000>;
interrupts = <33>;
};
gpio: gpio-controller@b0120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "sirf,prima2-gpio";
reg = <0xb0120000 0x10000>;
gpio-controller;
interrupt-controller;
};
pwm@b0130000 {
compatible = "sirf,prima2-pwm";
reg = <0xb0130000 0x10000>;
};
efusesys@b0140000 {
compatible = "sirf,prima2-efuse";
reg = <0xb0140000 0x10000>;
};
pulsec@b0150000 {
compatible = "sirf,prima2-pulsec";
reg = <0xb0150000 0x10000>;
interrupts = <48>;
};
pci-iobg {
compatible = "sirf,prima2-pciiobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x56000000 0x56000000 0x1b00000>;
sd0: sdhci@56000000 {
cell-index = <0>;
compatible = "sirf,prima2-sdhc";
reg = <0x56000000 0x100000>;
interrupts = <38>;
};
sd1: sdhci@56100000 {
cell-index = <1>;
compatible = "sirf,prima2-sdhc";
reg = <0x56100000 0x100000>;
interrupts = <38>;
};
sd2: sdhci@56200000 {
cell-index = <2>;
compatible = "sirf,prima2-sdhc";
reg = <0x56200000 0x100000>;
interrupts = <23>;
};
sd3: sdhci@56300000 {
cell-index = <3>;
compatible = "sirf,prima2-sdhc";
reg = <0x56300000 0x100000>;
interrupts = <23>;
};
sd4: sdhci@56400000 {
cell-index = <4>;
compatible = "sirf,prima2-sdhc";
reg = <0x56400000 0x100000>;
interrupts = <39>;
};
sd5: sdhci@56500000 {
cell-index = <5>;
compatible = "sirf,prima2-sdhc";
reg = <0x56500000 0x100000>;
interrupts = <39>;
};
pci-copy@57900000 {
compatible = "sirf,prima2-pcicp";
reg = <0x57900000 0x100000>;
interrupts = <40>;
};
rom-interface@57a00000 {
compatible = "sirf,prima2-romif";
reg = <0x57a00000 0x100000>;
};
};
};
rtc-iobg {
compatible = "sirf,prima2-rtciobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80030000 0x10000>;
gpsrtc@1000 {
compatible = "sirf,prima2-gpsrtc";
reg = <0x1000 0x1000>;
interrupts = <55 56 57>;
};
sysrtc@2000 {
compatible = "sirf,prima2-sysrtc";
reg = <0x2000 0x1000>;
interrupts = <52 53 54>;
};
pwrc@3000 {
compatible = "sirf,prima2-pwrc";
reg = <0x3000 0x1000>;
interrupts = <32>;
};
};
uus-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb8000000 0xb8000000 0x40000>;
usb0: usb@b00e0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8000000 0x10000>;
interrupts = <10>;
};
usb1: usb@b00f0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8010000 0x10000>;
interrupts = <11>;
};
sata@b00f0000 {
compatible = "synopsys,dwc-ahsata";
reg = <0xb8020000 0x10000>;
interrupts = <37>;
};
security@b00f0000 {
compatible = "sirf,prima2-security";
reg = <0xb8030000 0x10000>;
interrupts = <42>;
};
};
};
};
obj-y := timer.o
obj-y += irq.o
obj-y += clock.o
obj-y += rstc.o
obj-y += prima2.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
/*
* Clock tree for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/clkdev.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#define SIRFSOC_CLKC_CLK_EN0 0x0000
#define SIRFSOC_CLKC_CLK_EN1 0x0004
#define SIRFSOC_CLKC_REF_CFG 0x0014
#define SIRFSOC_CLKC_CPU_CFG 0x0018
#define SIRFSOC_CLKC_MEM_CFG 0x001c
#define SIRFSOC_CLKC_SYS_CFG 0x0020
#define SIRFSOC_CLKC_IO_CFG 0x0024
#define SIRFSOC_CLKC_DSP_CFG 0x0028
#define SIRFSOC_CLKC_GFX_CFG 0x002c
#define SIRFSOC_CLKC_MM_CFG 0x0030
#define SIRFSOC_LKC_LCD_CFG 0x0034
#define SIRFSOC_CLKC_MMC_CFG 0x0038
#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000)
#define KHZ 1000
#define MHZ (KHZ * KHZ)
struct clk_ops {
unsigned long (*get_rate)(struct clk *clk);
long (*round_rate)(struct clk *clk, unsigned long rate);
int (*set_rate)(struct clk *clk, unsigned long rate);
int (*enable)(struct clk *clk);
int (*disable)(struct clk *clk);
struct clk *(*get_parent)(struct clk *clk);
int (*set_parent)(struct clk *clk, struct clk *parent);
};
struct clk {
struct clk *parent; /* parent clk */
unsigned long rate; /* clock rate in Hz */
signed char usage; /* clock enable count */
signed char enable_bit; /* enable bit: 0 ~ 63 */
unsigned short regofs; /* register offset */
struct clk_ops *ops; /* clock operation */
};
static DEFINE_SPINLOCK(clocks_lock);
static inline unsigned long clkc_readl(unsigned reg)
{
return readl(SIRFSOC_CLOCK_VA_BASE + reg);
}
static inline void clkc_writel(u32 val, unsigned reg)
{
writel(val, SIRFSOC_CLOCK_VA_BASE + reg);
}
/*
* osc_rtc - real time oscillator - 32.768KHz
* osc_sys - high speed oscillator - 26MHz
*/
static struct clk clk_rtc = {
.rate = 32768,
};
static struct clk clk_osc = {
.rate = 26 * MHZ,
};
/*
* std pll
*/
static unsigned long std_pll_get_rate(struct clk *clk)
{
unsigned long fin = clk_get_rate(clk->parent);
u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
SIRFSOC_CLKC_PLL1_CFG0;
if (clkc_readl(regcfg2) & BIT(2)) {
/* pll bypass mode */
clk->rate = fin;
} else {
/* fout = fin * nf / nr / od */
u32 cfg0 = clkc_readl(clk->regofs);
u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
WARN_ON(fin % MHZ);
clk->rate = fin / MHZ * nf / nr / od * MHZ;
}
return clk->rate;
}
static int std_pll_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long fin, nf, nr, od, reg;
/*
* fout = fin * nf / (nr * od);
* set od = 1, nr = fin/MHz, so fout = nf * MHz
*/
nf = rate / MHZ;
if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
return -EINVAL;
fin = clk_get_rate(clk->parent);
BUG_ON(fin < MHZ);
nr = fin / MHZ;
BUG_ON((fin % MHZ) || nr > BIT(6));
od = 1;
reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
clkc_writel(reg, clk->regofs);
reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
clkc_writel((nf >> 1) - 1, reg);
reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
while (!(clkc_readl(reg) & BIT(6)))
cpu_relax();
clk->rate = 0; /* set to zero will force recalculation */
return 0;
}
static struct clk_ops std_pll_ops = {
.get_rate = std_pll_get_rate,
.set_rate = std_pll_set_rate,
};
static struct clk clk_pll1 = {
.parent = &clk_osc,
.regofs = SIRFSOC_CLKC_PLL1_CFG0,
.ops = &std_pll_ops,
};
static struct clk clk_pll2 = {
.parent = &clk_osc,
.regofs = SIRFSOC_CLKC_PLL2_CFG0,
.ops = &std_pll_ops,
};
static struct clk clk_pll3 = {
.parent = &clk_osc,
.regofs = SIRFSOC_CLKC_PLL3_CFG0,
.ops = &std_pll_ops,
};
/*
* clock domains - cpu, mem, sys/io
*/
static struct clk clk_mem;
static struct clk *dmn_get_parent(struct clk *clk)
{
struct clk *clks[] = {
&clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
};
u32 cfg = clkc_readl(clk->regofs);
WARN_ON((cfg & (BIT(3) - 1)) > 4);
return clks[cfg & (BIT(3) - 1)];
}
static int dmn_set_parent(struct clk *clk, struct clk *parent)
{
const struct clk *clks[] = {
&clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
};
u32 cfg = clkc_readl(clk->regofs);
int i;
for (i = 0; i < ARRAY_SIZE(clks); i++) {
if (clks[i] == parent) {
cfg &= ~(BIT(3) - 1);
clkc_writel(cfg | i, clk->regofs);
/* BIT(3) - switching status: 1 - busy, 0 - done */
while (clkc_readl(clk->regofs) & BIT(3))
cpu_relax();
return 0;
}
}
return -EINVAL;
}
static unsigned long dmn_get_rate(struct clk *clk)
{
unsigned long fin = clk_get_rate(clk->parent);
u32 cfg = clkc_readl(clk->regofs);
if (cfg & BIT(24)) {
/* fcd bypass mode */
clk->rate = fin;
} else {
/*
* wait count: bit[19:16], hold count: bit[23:20]
*/
u32 wait = (cfg >> 16) & (BIT(4) - 1);
u32 hold = (cfg >> 20) & (BIT(4) - 1);
clk->rate = fin / (wait + hold + 2);
}
return clk->rate;
}
static int dmn_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long fin;
unsigned ratio, wait, hold, reg;
unsigned bits = (clk == &clk_mem) ? 3 : 4;
fin = clk_get_rate(clk->parent);
ratio = fin / rate;
if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
return -EINVAL;
WARN_ON(fin % rate);
wait = (ratio >> 1) - 1;
hold = ratio - wait - 2;
reg = clkc_readl(clk->regofs);
reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
reg |= (wait << 16) | (hold << 20) | BIT(25);
clkc_writel(reg, clk->regofs);
/* waiting FCD been effective */
while (clkc_readl(clk->regofs) & BIT(25))
cpu_relax();
clk->rate = 0; /* set to zero will force recalculation */
return 0;
}
/*
* cpu clock has no FCD register in Prima2, can only change pll
*/
static int cpu_set_rate(struct clk *clk, unsigned long rate)
{
int ret1, ret2;
struct clk *cur_parent, *tmp_parent;
cur_parent = dmn_get_parent(clk);
BUG_ON(cur_parent == NULL || cur_parent->usage > 1);
/* switch to tmp pll before setting parent clock's rate */
tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1;
ret1 = dmn_set_parent(clk, tmp_parent);
BUG_ON(ret1);
ret2 = clk_set_rate(cur_parent, rate);
ret1 = dmn_set_parent(clk, cur_parent);
clk->rate = 0; /* set to zero will force recalculation */
return ret2 ? ret2 : ret1;
}
static struct clk_ops cpu_ops = {
.get_parent = dmn_get_parent,
.set_parent = dmn_set_parent,
.set_rate = cpu_set_rate,
};
static struct clk clk_cpu = {
.parent = &clk_pll1,
.regofs = SIRFSOC_CLKC_CPU_CFG,
.ops = &cpu_ops,
};
static struct clk_ops msi_ops = {
.set_rate = dmn_set_rate,
.get_rate = dmn_get_rate,
.set_parent = dmn_set_parent,
.get_parent = dmn_get_parent,
};
static struct clk clk_mem = {
.parent = &clk_pll2,
.regofs = SIRFSOC_CLKC_MEM_CFG,
.ops = &msi_ops,
};
static struct clk clk_sys = {
.parent = &clk_pll3,
.regofs = SIRFSOC_CLKC_SYS_CFG,
.ops = &msi_ops,
};
static struct clk clk_io = {
.parent = &clk_pll3,
.regofs = SIRFSOC_CLKC_IO_CFG,
.ops = &msi_ops,
};
/*
* on-chip clock sets
*/
static struct clk_lookup onchip_clks[] = {
{
.dev_id = "rtc",
.clk = &clk_rtc,
}, {
.dev_id = "osc",
.clk = &clk_osc,
}, {
.dev_id = "pll1",
.clk = &clk_pll1,
}, {
.dev_id = "pll2",
.clk = &clk_pll2,
}, {
.dev_id = "pll3",
.clk = &clk_pll3,
}, {
.dev_id = "cpu",
.clk = &clk_cpu,
}, {
.dev_id = "mem",
.clk = &clk_mem,
}, {
.dev_id = "sys",
.clk = &clk_sys,
}, {
.dev_id = "io",
.clk = &clk_io,
},
};
int clk_enable(struct clk *clk)
{
unsigned long flags;
if (unlikely(IS_ERR_OR_NULL(clk)))
return -EINVAL;
if (clk->parent)
clk_enable(clk->parent);
spin_lock_irqsave(&clocks_lock, flags);
if (!clk->usage++ && clk->ops && clk->ops->enable)
clk->ops->enable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
unsigned long flags;
if (unlikely(IS_ERR_OR_NULL(clk)))
return;
WARN_ON(!clk->usage);
spin_lock_irqsave(&clocks_lock, flags);
if (--clk->usage == 0 && clk->ops && clk->ops->disable)
clk->ops->disable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
if (clk->parent)
clk_disable(clk->parent);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
if (unlikely(IS_ERR_OR_NULL(clk)))
return 0;
if (clk->rate)
return clk->rate;
if (clk->ops && clk->ops->get_rate)
return clk->ops->get_rate(clk);
return clk_get_rate(clk->parent);
}
EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (unlikely(IS_ERR_OR_NULL(clk)))
return 0;
if (clk->ops && clk->ops->round_rate)
return clk->ops->round_rate(clk, rate);
return 0;
}
EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
if (unlikely(IS_ERR_OR_NULL(clk)))
return -EINVAL;
if (!clk->ops || !clk->ops->set_rate)
return -EINVAL;
return clk->ops->set_rate(clk, rate);
}
EXPORT_SYMBOL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret;
unsigned long flags;
if (unlikely(IS_ERR_OR_NULL(clk)))
return -EINVAL;
if (!clk->ops || !clk->ops->set_parent)
return -EINVAL;
spin_lock_irqsave(&clocks_lock, flags);
ret = clk->ops->set_parent(clk, parent);
if (!ret) {
parent->usage += clk->usage;
clk->parent->usage -= clk->usage;
BUG_ON(clk->parent->usage < 0);
clk->parent = parent;
}
spin_unlock_irqrestore(&clocks_lock, flags);
return ret;
}
EXPORT_SYMBOL(clk_set_parent);
struct clk *clk_get_parent(struct clk *clk)
{
unsigned long flags;
if (unlikely(IS_ERR_OR_NULL(clk)))
return NULL;
if (!clk->ops || !clk->ops->get_parent)
return clk->parent;
spin_lock_irqsave(&clocks_lock, flags);
clk->parent = clk->ops->get_parent(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
static void __init sirfsoc_clk_init(void)
{
clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
}
static struct of_device_id clkc_ids[] = {
{ .compatible = "sirf,prima2-clkc" },
};
void __init sirfsoc_of_clk_init(void)
{
struct device_node *np;
struct resource res;
struct map_desc sirfsoc_clkc_iodesc = {
.virtual = SIRFSOC_CLOCK_VA_BASE,
.type = MT_DEVICE,
};
np = of_find_matching_node(NULL, clkc_ids);
if (!np)
panic("unable to find compatible clkc node in dtb\n");
if (of_address_to_resource(np, 0, &res))
panic("unable to find clkc range in dtb");
of_node_put(np);
sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start);
sirfsoc_clkc_iodesc.length = 1 + res.end - res.start;
iotable_init(&sirfsoc_clkc_iodesc, 1);
sirfsoc_clk_init();
}
/*
* This file contains common function prototypes to avoid externs in the c files.
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_COMMON_H__
#define __MACH_PRIMA2_COMMON_H__
#include <linux/init.h>
#include <asm/mach/time.h>
extern struct sys_timer sirfsoc_timer;
extern void __init sirfsoc_of_irq_init(void);
extern void __init sirfsoc_of_clk_init(void);
#endif
/*
* arch/arm/mach-prima2/include/mach/clkdev.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
#define __clk_get(clk) ({ 1; })
#define __clk_put(clk) do { } while (0)
#endif
/*
* arch/arm/mach-prima2/include/mach/debug-macro.S
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <mach/hardware.h>
#include <mach/uart.h>
.macro addruart, rp, rv
ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
.endm
.macro senduart,rd,rx
str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA]
.endm
.macro busyuart,rd,rx
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS]
tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY
beq 1001b
.endm
/*
* arch/arm/mach-prima2/include/mach/entry-macro.S
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <mach/hardware.h>
#define SIRFSOC_INT_ID 0x38
.macro get_irqnr_preamble, base, tmp
ldr \base, =sirfsoc_intc_base
ldr \base, [\base]
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #SIRFSOC_INT_ID] @ Get the highest priority irq
cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f
movges \irqnr, #0
.endm
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* arch/arm/mach-prima2/include/mach/hardware.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_HARDWARE_H__
#define __MACH_HARDWARE_H__
#include <asm/sizes.h>
#include <mach/map.h>
#endif
/*
* arch/arm/mach-prima2/include/mach/io.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_IO_H
#define __MACH_PRIMA2_IO_H
#define IO_SPACE_LIMIT ((resource_size_t)0)
#define __mem_pci(a) (a)
#endif
/*
* arch/arm/mach-prima2/include/mach/irqs.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define SIRFSOC_INTENAL_IRQ_START 0
#define SIRFSOC_INTENAL_IRQ_END 59
#define NR_IRQS 220
#endif
/*
* memory & I/O static mapping definitions for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_MAP_H__
#define __MACH_PRIMA2_MAP_H__
#include <mach/vmalloc.h>
#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000))
#endif
/*
* arch/arm/mach-prima2/include/mach/memory.h
*
* Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
/*
* Restrict DMA-able region to workaround silicon limitation.
* The limitation restricts buffers available for DMA to SD/MMC
* hardware to be below 256MB
*/
#define ARM_DMA_ZONE_SIZE (SZ_256M)
#endif
/*
* arch/arm/mach-prima2/include/mach/system.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_SYSTEM_H__
#define __MACH_SYSTEM_H__
#include <linux/bitops.h>
#include <mach/hardware.h>
#define SIRFSOC_SYS_RST_BIT BIT(31)
extern void __iomem *sirfsoc_rstc_base;
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
}
#endif
/*
* arch/arm/mach-prima2/include/mach/timex.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_TIMEX_H__
#define __MACH_TIMEX_H__
#define CLOCK_TICK_RATE 1000000
#endif
/*
* arch/arm/mach-prima2/include/mach/uart.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_SIRFSOC_UART_H
#define __MACH_PRIMA2_SIRFSOC_UART_H
/* UART-1: used as serial debug port */
#define SIRFSOC_UART1_PA_BASE 0xb0060000
#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000)
#define SIRFSOC_UART1_SIZE SZ_4K
#define SIRFSOC_UART_TXFIFO_STATUS 0x0114
#define SIRFSOC_UART_TXFIFO_DATA 0x0118
#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5)
#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6)
#endif
/*
* arch/arm/mach-prima2/include/mach/uncompress.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/uart.h>
void arch_decomp_setup(void)
{
}
#define arch_decomp_wdog()
static __inline__ void putc(char c)
{
/*
* during kernel decompression, all mappings are flat:
* virt_addr == phys_addr
*/
while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
& SIRFSOC_UART1_TXFIFO_FULL)
barrier();
__raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
}
static inline void flush(void)
{
}
#endif
/*
* arch/arm/ach-prima2/include/mach/vmalloc.h
*
* Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_VMALLOC_H
#define __MACH_VMALLOC_H
#include <linux/const.h>
#define VMALLOC_END _AC(0xFEC00000, UL)
#endif
/*
* interrupt controller support for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#define SIRFSOC_INT_RISC_MASK0 0x0018
#define SIRFSOC_INT_RISC_MASK1 0x001C
#define SIRFSOC_INT_RISC_LEVEL0 0x0020
#define SIRFSOC_INT_RISC_LEVEL1 0x0024
void __iomem *sirfsoc_intc_base;
static __init void
sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq);
ct = gc->chip_types;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->regs.mask = SIRFSOC_INT_RISC_MASK0;
irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0);
}
static __init void sirfsoc_irq_init(void)
{
sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
}
static struct of_device_id intc_ids[] = {
{ .compatible = "sirf,prima2-intc" },
};
void __init sirfsoc_of_irq_init(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, intc_ids);
if (!np)
panic("unable to find compatible intc node in dtb\n");
sirfsoc_intc_base = of_iomap(np, 0);
if (!sirfsoc_intc_base)
panic("unable to map intc cpu registers\n");
of_node_put(np);
sirfsoc_irq_init();
}
/*
* Defines machines for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include "common.h"
static struct of_device_id sirfsoc_of_bus_ids[] __initdata = {
{ .compatible = "simple-bus", },
{},
};
void __init sirfsoc_mach_init(void)
{
of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
}
static const char *prima2cb_dt_match[] __initdata = {
"sirf,prima2-cb",
NULL
};
MACHINE_START(PRIMA2_EVB, "prima2cb")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.boot_params = 0x00000100,
.init_early = sirfsoc_of_clk_init,
.init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer,
.init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match,
MACHINE_END
/*
* reset controller for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_address.h>
void __iomem *sirfsoc_rstc_base;
static DEFINE_MUTEX(rstc_lock);
static struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
};
static int __init sirfsoc_of_rstc_init(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, rstc_ids);
if (!np)
panic("unable to find compatible rstc node in dtb\n");
sirfsoc_rstc_base = of_iomap(np, 0);
if (!sirfsoc_rstc_base)
panic("unable to map rstc cpu registers\n");
of_node_put(np);
return 0;
}
early_initcall(sirfsoc_of_rstc_init);
int sirfsoc_reset_device(struct device *dev)
{
const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL);
unsigned int reset_bit;
if (!prop)
return -ENODEV;
reset_bit = be32_to_cpup(prop);
mutex_lock(&rstc_lock);
/*
* Writing 1 to this bit resets corresponding block. Writing 0 to this
* bit de-asserts reset signal of the corresponding block.
* datasheet doesn't require explicit delay between the set and clear
* of reset bit. it could be shorter if tests pass.
*/
writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
sirfsoc_rstc_base + (reset_bit / 32) * 4);
msleep(10);
writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
sirfsoc_rstc_base + (reset_bit / 32) * 4);
mutex_unlock(&rstc_lock);
return 0;
}
/*
* System timer for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/bitops.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <mach/map.h>
#include <asm/mach/time.h>
#define SIRFSOC_TIMER_COUNTER_LO 0x0000
#define SIRFSOC_TIMER_COUNTER_HI 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0008
#define SIRFSOC_TIMER_MATCH_1 0x000C
#define SIRFSOC_TIMER_MATCH_2 0x0010
#define SIRFSOC_TIMER_MATCH_3 0x0014
#define SIRFSOC_TIMER_MATCH_4 0x0018
#define SIRFSOC_TIMER_MATCH_5 0x001C
#define SIRFSOC_TIMER_STATUS 0x0020
#define SIRFSOC_TIMER_INT_EN 0x0024
#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028
#define SIRFSOC_TIMER_DIV 0x002C
#define SIRFSOC_TIMER_LATCH 0x0030
#define SIRFSOC_TIMER_LATCHED_LO 0x0034
#define SIRFSOC_TIMER_LATCHED_HI 0x0038
#define SIRFSOC_TIMER_WDT_INDEX 5
#define SIRFSOC_TIMER_LATCH_BIT BIT(0)
static void __iomem *sirfsoc_timer_base;
static void __init sirfsoc_of_timer_map(void);
/* timer0 interrupt handler */
static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *ce = dev_id;
WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0)));
/* clear timer0 interrupt */
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
ce->event_handler(ce);
return IRQ_HANDLED;
}
/* read 64-bit timer counter */
static cycle_t sirfsoc_timer_read(struct clocksource *cs)
{
u64 cycles;
/* latch the 64-bit timer counter */
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI);
cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
return cycles;
}
static int sirfsoc_timer_set_next_event(unsigned long delta,
struct clock_event_device *ce)
{
unsigned long now, next;
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
next = now + delta;
writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0);
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
return next - now > delta ? -ETIME : 0;
}
static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *ce)
{
u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
WARN_ON(1);
break;
case CLOCK_EVT_MODE_ONESHOT:
writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_RESUME:
break;
}
}
static struct clock_event_device sirfsoc_clockevent = {
.name = "sirfsoc_clockevent",
.rating = 200,
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sirfsoc_timer_set_mode,
.set_next_event = sirfsoc_timer_set_next_event,
};
static struct clocksource sirfsoc_clocksource = {
.name = "sirfsoc_clocksource",
.rating = 200,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.read = sirfsoc_timer_read,
};
static struct irqaction sirfsoc_timer_irq = {
.name = "sirfsoc_timer0",
.flags = IRQF_TIMER,
.irq = 0,
.handler = sirfsoc_timer_interrupt,
.dev_id = &sirfsoc_clockevent,
};
/* Overwrite weak default sched_clock with more precise one */
unsigned long long notrace sched_clock(void)
{
static int is_mapped = 0;
/*
* sched_clock is called earlier than .init of sys_timer
* if we map timer memory in .init of sys_timer, system
* will panic due to illegal memory access
*/
if(!is_mapped) {
sirfsoc_of_timer_map();
is_mapped = 1;
}
return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE);
}
static void __init sirfsoc_clockevent_init(void)
{
clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
sirfsoc_clockevent.max_delta_ns =
clockevent_delta2ns(-2, &sirfsoc_clockevent);
sirfsoc_clockevent.min_delta_ns =
clockevent_delta2ns(2, &sirfsoc_clockevent);
sirfsoc_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&sirfsoc_clockevent);
}
/* initialize the kernel jiffy timer source */
static void __init sirfsoc_timer_init(void)
{
unsigned long rate;
/* timer's input clock is io clock */
struct clk *clk = clk_get_sys("io", NULL);
BUG_ON(IS_ERR(clk));
rate = clk_get_rate(clk);
BUG_ON(rate < CLOCK_TICK_RATE);
BUG_ON(rate % CLOCK_TICK_RATE);
writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
sirfsoc_clockevent_init();
}
static struct of_device_id timer_ids[] = {
{ .compatible = "sirf,prima2-tick" },
};
static void __init sirfsoc_of_timer_map(void)
{
struct device_node *np;
const unsigned int *intspec;
np = of_find_matching_node(NULL, timer_ids);
if (!np)
panic("unable to find compatible timer node in dtb\n");
sirfsoc_timer_base = of_iomap(np, 0);
if (!sirfsoc_timer_base)
panic("unable to map timer cpu registers\n");
/* Get the interrupts property */
intspec = of_get_property(np, "interrupts", NULL);
BUG_ON(!intspec);
sirfsoc_timer_irq.irq = be32_to_cpup(intspec);
of_node_put(np);
}
struct sys_timer sirfsoc_timer = {
.init = sirfsoc_timer_init,
};
......@@ -821,7 +821,7 @@ config CACHE_L2X0
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || ARCH_PRIMA2
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册