提交 0098410d 编写于 作者: L Linus Torvalds

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 microcode loading updates from Ingo Molnar:
 "Update documentation, improve robustness and fix a memory leak"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/intel: Improve microcode patches saving flow
  x86/microcode: Document the three loading methods
  x86/microcode/AMD: Free unneeded patch before exit from update_cache()
Early load microcode
====================
By Fenghua Yu <fenghua.yu@intel.com>
Kernel can update microcode in early phase of boot time. Loading microcode early
can fix CPU issues before they are observed during kernel boot time.
Microcode is stored in an initrd file. The microcode is read from the initrd
file and loaded to CPUs during boot time.
The format of the combined initrd image is microcode in cpio format followed by
the initrd image (maybe compressed). Kernel parses the combined initrd image
during boot time. The microcode file in cpio name space is:
on Intel: kernel/x86/microcode/GenuineIntel.bin
on AMD : kernel/x86/microcode/AuthenticAMD.bin
During BSP boot (before SMP starts), if the kernel finds the microcode file in
the initrd file, it parses the microcode and saves matching microcode in memory.
If matching microcode is found, it will be uploaded in BSP and later on in all
APs.
The cached microcode patch is applied when CPUs resume from a sleep state.
There are two legacy user space interfaces to load microcode, either through
/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file
in sysfs.
In addition to these two legacy methods, the early loading method described
here is the third method with which microcode can be uploaded to a system's
CPUs.
The following example script shows how to generate a new combined initrd file in
/boot/initrd-3.5.0.ucode.img with original microcode microcode.bin and
original initrd image /boot/initrd-3.5.0.img.
mkdir initrd
cd initrd
mkdir -p kernel/x86/microcode
cp ../microcode.bin kernel/x86/microcode/GenuineIntel.bin (or AuthenticAMD.bin)
find . | cpio -o -H newc >../ucode.cpio
cd ..
cat ucode.cpio /boot/initrd-3.5.0.img >/boot/initrd-3.5.0.ucode.img
Builtin microcode
=================
We can also load builtin microcode supplied through the regular firmware
builtin method CONFIG_FIRMWARE_IN_KERNEL. Only 64-bit is currently
supported.
Here's an example:
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
This basically means, you have the following tree structure locally:
/lib/firmware/
|-- amd-ucode
...
| |-- microcode_amd_fam15h.bin
...
|-- intel-ucode
...
| |-- 06-3a-09
...
so that the build system can find those files and integrate them into
the final kernel image. The early loader finds them and applies them.
The Linux Microcode Loader
Authors: Fenghua Yu <fenghua.yu@intel.com>
Borislav Petkov <bp@suse.de>
The kernel has a x86 microcode loading facility which is supposed to
provide microcode loading methods in the OS. Potential use cases are
updating the microcode on platforms beyond the OEM End-Of-Life support,
and updating the microcode on long-running systems without rebooting.
The loader supports three loading methods:
1. Early load microcode
=======================
The kernel can update microcode very early during boot. Loading
microcode early can fix CPU issues before they are observed during
kernel boot time.
The microcode is stored in an initrd file. During boot, it is read from
it and loaded into the CPU cores.
The format of the combined initrd image is microcode in (uncompressed)
cpio format followed by the (possibly compressed) initrd image. The
loader parses the combined initrd image during boot.
The microcode files in cpio name space are:
on Intel: kernel/x86/microcode/GenuineIntel.bin
on AMD : kernel/x86/microcode/AuthenticAMD.bin
During BSP (BootStrapping Processor) boot (pre-SMP), the kernel
scans the microcode file in the initrd. If microcode matching the
CPU is found, it will be applied in the BSP and later on in all APs
(Application Processors).
The loader also saves the matching microcode for the CPU in memory.
Thus, the cached microcode patch is applied when CPUs resume from a
sleep state.
Here's a crude example how to prepare an initrd with microcode (this is
normally done automatically by the distribution, when recreating the
initrd, so you don't really have to do it yourself. It is documented
here for future reference only).
---
#!/bin/bash
if [ -z "$1" ]; then
echo "You need to supply an initrd file"
exit 1
fi
INITRD="$1"
DSTDIR=kernel/x86/microcode
TMPDIR=/tmp/initrd
rm -rf $TMPDIR
mkdir $TMPDIR
cd $TMPDIR
mkdir -p $DSTDIR
if [ -d /lib/firmware/amd-ucode ]; then
cat /lib/firmware/amd-ucode/microcode_amd*.bin > $DSTDIR/AuthenticAMD.bin
fi
if [ -d /lib/firmware/intel-ucode ]; then
cat /lib/firmware/intel-ucode/* > $DSTDIR/GenuineIntel.bin
fi
find . | cpio -o -H newc >../ucode.cpio
cd ..
mv $INITRD $INITRD.orig
cat ucode.cpio $INITRD.orig > $INITRD
rm -rf $TMPDIR
---
The system needs to have the microcode packages installed into
/lib/firmware or you need to fixup the paths above if yours are
somewhere else and/or you've downloaded them directly from the processor
vendor's site.
2. Late loading
===============
There are two legacy user space interfaces to load microcode, either through
/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file
in sysfs.
The /dev/cpu/microcode method is deprecated because it needs a special
userspace tool for that.
The easier method is simply installing the microcode packages your distro
supplies and running:
# echo 1 > /sys/devices/system/cpu/microcode/reload
as root.
The loading mechanism looks for microcode blobs in
/lib/firmware/{intel-ucode,amd-ucode}. The default distro installation
packages already put them there.
3. Builtin microcode
====================
The loader supports also loading of a builtin microcode supplied through
the regular firmware builtin method CONFIG_FIRMWARE_IN_KERNEL. Only
64-bit is currently supported.
Here's an example:
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
This basically means, you have the following tree structure locally:
/lib/firmware/
|-- amd-ucode
...
| |-- microcode_amd_fam15h.bin
...
|-- intel-ucode
...
| |-- 06-3a-09
...
so that the build system can find those files and integrate them into
the final kernel image. The early loader finds them and applies them.
Needless to say, this method is not the most flexible one because it
requires rebuilding the kernel each time updated microcode from the CPU
vendor is available.
......@@ -400,9 +400,12 @@ static void update_cache(struct ucode_patch *new_patch)
list_for_each_entry(p, &microcode_cache, plist) {
if (p->equiv_cpu == new_patch->equiv_cpu) {
if (p->patch_id >= new_patch->patch_id)
if (p->patch_id >= new_patch->patch_id) {
/* we already have the latest patch */
kfree(new_patch->data);
kfree(new_patch);
return;
}
list_replace(&p->plist, &new_patch->plist);
kfree(p->data);
......
......@@ -146,18 +146,18 @@ static bool microcode_matches(struct microcode_header_intel *mc_header,
return false;
}
static struct ucode_patch *__alloc_microcode_buf(void *data, unsigned int size)
static struct ucode_patch *memdup_patch(void *data, unsigned int size)
{
struct ucode_patch *p;
p = kzalloc(sizeof(struct ucode_patch), GFP_KERNEL);
if (!p)
return ERR_PTR(-ENOMEM);
return NULL;
p->data = kmemdup(data, size, GFP_KERNEL);
if (!p->data) {
kfree(p);
return ERR_PTR(-ENOMEM);
return NULL;
}
return p;
......@@ -183,8 +183,8 @@ static void save_microcode_patch(void *data, unsigned int size)
if (mc_hdr->rev <= mc_saved_hdr->rev)
continue;
p = __alloc_microcode_buf(data, size);
if (IS_ERR(p))
p = memdup_patch(data, size);
if (!p)
pr_err("Error allocating buffer %p\n", data);
else
list_replace(&iter->plist, &p->plist);
......@@ -196,24 +196,25 @@ static void save_microcode_patch(void *data, unsigned int size)
* newly found.
*/
if (!prev_found) {
p = __alloc_microcode_buf(data, size);
if (IS_ERR(p))
p = memdup_patch(data, size);
if (!p)
pr_err("Error allocating buffer for %p\n", data);
else
list_add_tail(&p->plist, &microcode_cache);
}
if (!p)
return;
/*
* Save for early loading. On 32-bit, that needs to be a physical
* address as the APs are running from physical addresses, before
* paging has been enabled.
*/
if (p) {
if (IS_ENABLED(CONFIG_X86_32))
intel_ucode_patch = (struct microcode_intel *)__pa_nodebug(p->data);
else
intel_ucode_patch = p->data;
}
}
static int microcode_sanity_check(void *mc, int print_err)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册