diff --git a/bsp/gd32105c-eval/.config b/bsp/gd32105c-eval/.config new file mode 100644 index 0000000000000000000000000000000000000000..3642cdfa717e3479e56066af80cb2c458b370675 --- /dev/null +++ b/bsp/gd32105c-eval/.config @@ -0,0 +1,631 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_ALIGN_SIZE=4 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=100 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set + +# +# kservice optimization +# +# CONFIG_RT_KSERVICE_USING_STDLIB is not set +# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set +# CONFIG_RT_USING_ASM_MEMCPY is not set +CONFIG_RT_DEBUG=y +CONFIG_RT_DEBUG_COLOR=y +# CONFIG_RT_DEBUG_INIT_CONFIG is not set +# CONFIG_RT_DEBUG_THREAD_CONFIG is not set +# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set +# CONFIG_RT_DEBUG_IPC_CONFIG is not set +# CONFIG_RT_DEBUG_TIMER_CONFIG is not set +# CONFIG_RT_DEBUG_IRQ_CONFIG is not set +# CONFIG_RT_DEBUG_MEM_CONFIG is not set +# CONFIG_RT_DEBUG_SLAB_CONFIG is not set +# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set +# CONFIG_RT_DEBUG_MODULE_CONFIG is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +# CONFIG_RT_USING_MEMHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_USERHEAP is not set +# CONFIG_RT_USING_MEMTRACE is not set +CONFIG_RT_USING_HEAP=y + +# +# Kernel Device Object +# +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart0" +# CONFIG_RT_PRINTF_LONGLONG is not set +CONFIG_RT_VER_NUM=0x40004 +# CONFIG_RT_USING_CPU_FFS is not set +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 + +# +# C++ features +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Command shell +# +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_CMD_SIZE=80 +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_USING_MSH_DEFAULT=y +# CONFIG_FINSH_USING_MSH_ONLY is not set +CONFIG_FINSH_ARG_MAX=10 + +# +# Device virtual file system +# +CONFIG_RT_USING_DFS=y +CONFIG_DFS_USING_WORKDIR=y +CONFIG_DFS_FILESYSTEMS_MAX=4 +CONFIG_DFS_FILESYSTEM_TYPES_MAX=4 +CONFIG_DFS_FD_MAX=16 +# CONFIG_RT_USING_DFS_MNTTABLE is not set +CONFIG_RT_USING_DFS_ELMFAT=y + +# +# elm-chan's FatFs, Generic FAT Filesystem Module +# +CONFIG_RT_DFS_ELM_CODE_PAGE=437 +CONFIG_RT_DFS_ELM_WORD_ACCESS=y +# CONFIG_RT_DFS_ELM_USE_LFN_0 is not set +# CONFIG_RT_DFS_ELM_USE_LFN_1 is not set +# CONFIG_RT_DFS_ELM_USE_LFN_2 is not set +CONFIG_RT_DFS_ELM_USE_LFN_3=y +CONFIG_RT_DFS_ELM_USE_LFN=3 +CONFIG_RT_DFS_ELM_LFN_UNICODE_0=y +# CONFIG_RT_DFS_ELM_LFN_UNICODE_1 is not set +# CONFIG_RT_DFS_ELM_LFN_UNICODE_2 is not set +# CONFIG_RT_DFS_ELM_LFN_UNICODE_3 is not set +CONFIG_RT_DFS_ELM_LFN_UNICODE=0 +CONFIG_RT_DFS_ELM_MAX_LFN=255 +CONFIG_RT_DFS_ELM_DRIVES=2 +CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=4096 +# CONFIG_RT_DFS_ELM_USE_ERASE is not set +CONFIG_RT_DFS_ELM_REENTRANT=y +CONFIG_RT_USING_DFS_DEVFS=y +# CONFIG_RT_USING_DFS_ROMFS is not set +# CONFIG_RT_USING_DFS_RAMFS is not set + +# +# Device Drivers +# +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_PIPE_BUFSZ=512 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_USING_SERIAL_V1=y +# CONFIG_RT_USING_SERIAL_V2 is not set +CONFIG_RT_SERIAL_USING_DMA=y +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +CONFIG_RT_USING_I2C=y +# CONFIG_RT_I2C_DEBUG is not set +# CONFIG_RT_USING_I2C_BITOPS is not set +# CONFIG_RT_USING_PHY is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_DAC is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +CONFIG_RT_USING_SPI=y +# CONFIG_RT_USING_QSPI is not set +# CONFIG_RT_USING_SPI_MSD is not set +CONFIG_RT_USING_SFUD=y +CONFIG_RT_SFUD_USING_SFDP=y +CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y +# CONFIG_RT_SFUD_USING_QSPI is not set +CONFIG_RT_SFUD_SPI_MAX_HZ=50000000 +# CONFIG_RT_DEBUG_SFUD is not set +# CONFIG_RT_USING_ENC28J60 is not set +# CONFIG_RT_USING_SPI_WIFI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_WIFI is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# POSIX layer and C standard library +# +# CONFIG_RT_USING_LIBC is not set +# CONFIG_RT_USING_PTHREADS is not set +CONFIG_RT_LIBC_USING_TIME=y +CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8 + +# +# Network +# + +# +# Socket abstraction layer +# +# CONFIG_RT_USING_SAL is not set + +# +# Network interface device +# +# CONFIG_RT_USING_NETDEV is not set + +# +# light weight TCP/IP stack +# +# CONFIG_RT_USING_LWIP is not set + +# +# AT commands +# +# CONFIG_RT_USING_AT is not set + +# +# VBUS(Virtual Software BUS) +# +# CONFIG_RT_USING_VBUS is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_RT_LINK is not set + +# +# RT-Thread Utestcases +# +# CONFIG_RT_USING_UTESTCASES is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_LORAWAN_DRIVER is not set +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set +# CONFIG_PKG_USING_ZB_COORDINATOR is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set +# CONFIG_PKG_USING_NMEALIB is not set +# CONFIG_PKG_USING_AGILE_JSMN is not set +# CONFIG_PKG_USING_PDULIB is not set +# CONFIG_PKG_USING_BTSTACK is not set +# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set +# CONFIG_PKG_USING_WAYZ_IOTKIT is not set +# CONFIG_PKG_USING_MAVLINK is not set +# CONFIG_PKG_USING_RAPIDJSON is not set +# CONFIG_PKG_USING_BSAL is not set +# CONFIG_PKG_USING_AGILE_MODBUS is not set +# CONFIG_PKG_USING_AGILE_FTP is not set +# CONFIG_PKG_USING_EMBEDDEDPROTO is not set +# CONFIG_PKG_USING_RT_LINK_HW is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_libsodium is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set + +# +# language packages +# +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set +# CONFIG_PKG_USING_PIKASCRIPT is not set + +# +# multimedia packages +# +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set +# CONFIG_PKG_USING_PDFGEN is not set +# CONFIG_PKG_USING_HELIX is not set +# CONFIG_PKG_USING_AZUREGUIX is not set +# CONFIG_PKG_USING_TOUCHGFX2RTT is not set +# CONFIG_PKG_USING_NUEMWIN is not set +# CONFIG_PKG_USING_MP3PLAYER is not set +# CONFIG_PKG_USING_TINYJPEG is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_SEGGER_RTT is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_ULOG_FILE is not set +# CONFIG_PKG_USING_LOGMGR is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_MEMORYPERF is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_GPS_RMC is not set +# CONFIG_PKG_USING_URLENCODE is not set +# CONFIG_PKG_USING_UMCN is not set +# CONFIG_PKG_USING_LWRB2RTT is not set +# CONFIG_PKG_USING_CPU_USAGE is not set +# CONFIG_PKG_USING_GBK2UTF8 is not set +# CONFIG_PKG_USING_VCONSOLE is not set +# CONFIG_PKG_USING_KDB is not set +# CONFIG_PKG_USING_WAMR is not set +# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set +# CONFIG_PKG_USING_LWLOG is not set +# CONFIG_PKG_USING_ANV_TRACE is not set +# CONFIG_PKG_USING_ANV_MEMLEAK is not set +# CONFIG_PKG_USING_ANV_TESTSUIT is not set +# CONFIG_PKG_USING_ANV_BENCH is not set +# CONFIG_PKG_USING_DEVMEM is not set +# CONFIG_PKG_USING_REGEX is not set +# CONFIG_PKG_USING_MEM_SANDBOX is not set +# CONFIG_PKG_USING_SOLAR_TERMS is not set +# CONFIG_PKG_USING_GAN_ZHI is not set + +# +# system packages +# + +# +# acceleration: Assembly language or algorithmic acceleration packages +# +# CONFIG_PKG_USING_RT_MEMCPY_CM is not set +# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set +# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set +# CONFIG_PKG_USING_QFPLIB_M3 is not set + +# +# Micrium: Micrium software products porting for RT-Thread +# +# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set +# CONFIG_PKG_USING_UCOSII_WRAPPER is not set +# CONFIG_PKG_USING_UC_CRC is not set +# CONFIG_PKG_USING_UC_CLK is not set +# CONFIG_PKG_USING_UC_COMMON is not set +# CONFIG_PKG_USING_UC_MODBUS is not set +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_DFS_JFFS2 is not set +# CONFIG_PKG_USING_DFS_UFFS is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set +# CONFIG_PKG_USING_PPOOL is not set +# CONFIG_PKG_USING_OPENAMP is not set +# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set +# CONFIG_PKG_USING_LPM is not set +# CONFIG_PKG_USING_TLSF is not set +# CONFIG_PKG_USING_EVENT_RECORDER is not set +# CONFIG_PKG_USING_ARM_2D is not set + +# +# peripheral libraries and drivers +# +# CONFIG_PKG_USING_SENSORS_DRIVERS is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_AS7341 is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_U8G2 is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_WS2812B is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set +# CONFIG_PKG_USING_PAJ7620 is not set +# CONFIG_PKG_USING_AGILE_CONSOLE is not set +# CONFIG_PKG_USING_LD3320 is not set +# CONFIG_PKG_USING_WK2124 is not set +# CONFIG_PKG_USING_LY68L6400 is not set +# CONFIG_PKG_USING_DM9051 is not set +# CONFIG_PKG_USING_SSD1306 is not set +# CONFIG_PKG_USING_QKEY is not set +# CONFIG_PKG_USING_RS485 is not set +# CONFIG_PKG_USING_NES is not set +# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set +# CONFIG_PKG_USING_VDEVICE is not set +# CONFIG_PKG_USING_SGM706 is not set +# CONFIG_PKG_USING_STM32WB55_SDK is not set +# CONFIG_PKG_USING_RDA58XX is not set +# CONFIG_PKG_USING_LIBNFC is not set +# CONFIG_PKG_USING_MFOC is not set +# CONFIG_PKG_USING_TMC51XX is not set +# CONFIG_PKG_USING_TCA9534 is not set +# CONFIG_PKG_USING_KOBUKI is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_MICRO_ROS is not set +# CONFIG_PKG_USING_MCP23008 is not set +# CONFIG_PKG_USING_BLUETRUM_SDK is not set + +# +# AI packages +# +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_QUEST is not set +# CONFIG_PKG_USING_NAXOS is not set + +# +# miscellaneous packages +# + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set + +# +# entertainment: terminal games and other interesting software packages +# +# CONFIG_PKG_USING_CMATRIX is not set +# CONFIG_PKG_USING_SL is not set +# CONFIG_PKG_USING_CAL is not set +# CONFIG_PKG_USING_ACLOCK is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set +# CONFIG_PKG_USING_SNAKE is not set +# CONFIG_PKG_USING_TETRIS is not set +# CONFIG_PKG_USING_DONUT is not set +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_LZMA is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_MINIZIP is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_KI is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_UKAL is not set +# CONFIG_PKG_USING_CRCLIB is not set +# CONFIG_PKG_USING_LWGPS is not set +# CONFIG_PKG_USING_STATE_MACHINE is not set +# CONFIG_PKG_USING_MCURSES is not set +# CONFIG_PKG_USING_COWSAY is not set + +# +# Hardware Drivers Config +# + +# +# Onboard Peripheral Drivers +# + +# +# On-chip Peripheral Drivers +# +CONFIG_SOC_SERIES_GD32F1=y +CONFIG_SOC_GD32105C=y +CONFIG_RT_USING_USART0=y +# CONFIG_RT_USING_USART1 is not set +# CONFIG_RT_USING_USART2 is not set +# CONFIG_RT_USING_UART3 is not set +CONFIG_RT_USING_SPI0=y +# CONFIG_RT_USING_SPI1 is not set +# CONFIG_RT_USING_SPI2 is not set +CONFIG_RT_USING_I2C0=y +# CONFIG_RT_USING_I2C1 is not set + +# +# Board extended module Drivers +# diff --git a/bsp/gd32105c-eval/.ignore_format.yml b/bsp/gd32105c-eval/.ignore_format.yml new file mode 100644 index 0000000000000000000000000000000000000000..d570c52faf04b27e83a7e3ed5e71ecb2bf763dd4 --- /dev/null +++ b/bsp/gd32105c-eval/.ignore_format.yml @@ -0,0 +1,8 @@ +# files format check exclude path, please follow the instructions below to modify; +# If you need to exclude an entire folder, add the folder path in dir_path; +# If you need to exclude a file, add the path to the file in file_path. + +file_path: + +dir_path: +- Libraries diff --git a/bsp/gd32105c-eval/JLinkLog.txt b/bsp/gd32105c-eval/JLinkLog.txt new file mode 100644 index 0000000000000000000000000000000000000000..67108a9d16959cf21b3f060c9e0c9593e112194f --- /dev/null +++ b/bsp/gd32105c-eval/JLinkLog.txt @@ -0,0 +1,168 @@ + +T8DC0 000:275 SEGGER J-Link V4.96d Log File (0001ms, 0260ms total) +T8DC0 000:275 DLL Compiled: Jan 29 2015 11:45:37 (0001ms, 0260ms total) +T8DC0 000:275 Logging started @ 2021-08-24 11:03 (0001ms, 0260ms total) +T8DC0 000:276 JLINK_SetWarnOutHandler(...) (0000ms, 0260ms total) +T8DC0 000:276 JLINK_OpenEx(...) +Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46 +Hardware: V8.00 +S/N: 58001139 +Feature(s): RDI,FlashDL,FlashBP,JFlash returns O.K. (0260ms, 0520ms total) +T8DC0 000:536 JLINK_SetErrorOutHandler(...) (0000ms, 0520ms total) +T8DC0 000:536 JLINK_ExecCommand("ProjectFile = "E:\code\rtt\rt-thread\bsp\gd32105c-eval\JLinkSettings.ini"", ...)Device "UNSPECIFIED" selected. returns 0x00 (0001ms, 0521ms total) +T8DC0 000:537 JLINK_ExecCommand("Device = GD32F105VC", ...)Device "UNSPECIFIED" selected. returns 0x00 (0000ms, 0521ms total) +T8DC0 000:537 JLINK_ExecCommand("DisableConnectionTimeout", ...) returns 0x01 (0000ms, 0521ms total) +T8DC0 000:537 JLINK_GetHardwareVersion() returns 0x13880 (0000ms, 0521ms total) +T8DC0 000:537 JLINK_GetDLLVersion() returns 49604 (0000ms, 0521ms total) +T8DC0 000:537 JLINK_GetFirmwareString(...) (0000ms, 0521ms total) +T8DC0 000:537 JLINK_GetDLLVersion() returns 49604 (0000ms, 0521ms total) +T8DC0 000:537 JLINK_GetCompileDateTime() (0000ms, 0521ms total) +T8DC0 000:538 JLINK_GetFirmwareString(...) (0000ms, 0521ms total) +T8DC0 000:538 JLINK_GetHardwareVersion() returns 0x13880 (0000ms, 0521ms total) +T8DC0 000:538 JLINK_TIF_Select(JLINKARM_TIF_JTAG) returns 0x00 (0001ms, 0522ms total) +T8DC0 000:539 JLINK_SetSpeed(20000) (0000ms, 0522ms total) +T8DC0 000:539 JLINK_GetIdData(...) >0x2F8 JTAG>TotalIRLen = 9, IRPrint = 0x0011 >0x30 JTAG> >0x210 JTAG> >0x70 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x50 JTAG> >0x80 JTAG> >0x40 JTAG> >0x30 JTAG> >0x40 JTAG> >0x40 JTAG> >0x30 JTAG> >0x40 JTAG> >0x50 JTAG>Found Cortex-M3 r2p1, Little endian. -- CPU_WriteMem(4 bytes @ 0xE0002000) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU_ReadMem(4 bytes @ 0xE0002000)FPUnit: 6 code (BP) slots and 2 literal slots -- CPU_ReadMem(4 bytes @ 0xE000EDFC) + -- CPU_ReadMem(4 bytes @ 0xE0001000) -- CPU_WriteMem(4 bytes @ 0xE0001000) -- CPU_ReadMem(4 bytes @ 0xE000ED88) -- CPU_WriteMem(4 bytes @ 0xE000ED88) -- CPU_ReadMem(4 bytes @ 0xE000ED88) -- CPU_WriteMem(4 bytes @ 0xE000ED88) -- CPU_ReadMem(4 bytes @ 0xE00FF010)TPIU fitted. -- CPU_ReadMem(4 bytes @ 0xE00FF014)ETM fitted. -- CPU_ReadMem(4 bytes @ 0xE00FF018) ScanLen=9 NumDevices=2 aId[0]=0x4BA00477 aIrRead[0]=0 aScanLen[0]=0 aScanRead[0]=0 (0015ms, 0537ms total) +T8DC0 000:554 JLINK_JTAG_GetDeviceID(DeviceIndex = 0) returns 0x4BA00477 (0000ms, 0537ms total) +T8DC0 000:554 JLINK_JTAG_GetDeviceInfo(DeviceIndex = 0) returns 0x00 (0000ms, 0537ms total) +T8DC0 000:554 JLINK_JTAG_GetDeviceID(DeviceIndex = 1) returns 0x790007A3 (0000ms, 0537ms total) +T8DC0 000:554 JLINK_JTAG_GetDeviceInfo(DeviceIndex = 1) returns 0x01 (0000ms, 0537ms total) +T8DC0 000:554 JLINK_GetDLLVersion() returns 49604 (0000ms, 0537ms total) +T8DC0 000:554 JLINK_CORE_GetFound() returns 0x30000FF (0000ms, 0537ms total) +T8DC0 000:554 JLINK_GetDebugInfo(0x100) -- Value=0xE00FF003 returns 0x00 (0000ms, 0537ms total) +T8DC0 000:554 JLINK_ReadMem (0xE00FF000, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE00FF000) - Data: 03 F0 F0 FF 03 20 F0 FF 03 30 F0 FF 03 10 F0 FF ... returns 0x00 (0001ms, 0538ms total) +T8DC0 000:555 JLINK_ReadMem (0xE000EFF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE000EFF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00 returns 0x00 (0000ms, 0538ms total) +T8DC0 000:555 JLINK_ReadMem (0xE000EFD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE000EFD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... returns 0x00 (0000ms, 0538ms total) +T8DC0 000:555 JLINK_ReadMem (0xE0001FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0001FF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00 returns 0x00 (0001ms, 0539ms total) +T8DC0 000:556 JLINK_ReadMem (0xE0001FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0001FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... returns 0x00 (0000ms, 0539ms total) +T8DC0 000:556 JLINK_ReadMem (0xE0002FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0002FF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00 returns 0x00 (0001ms, 0540ms total) +T8DC0 000:557 JLINK_ReadMem (0xE0002FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0002FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... returns 0x00 (0000ms, 0540ms total) +T8DC0 000:557 JLINK_ReadMem (0xE0000FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0000FF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00 returns 0x00 (0001ms, 0541ms total) +T8DC0 000:558 JLINK_ReadMem (0xE0000FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0000FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... returns 0x00 (0000ms, 0541ms total) +T8DC0 000:558 JLINK_ReadMem (0xE0040FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0040FF0) - Data: 0D 00 00 00 90 00 00 00 05 00 00 00 B1 00 00 00 returns 0x00 (0001ms, 0542ms total) +T8DC0 000:559 JLINK_ReadMem (0xE0040FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0040FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... returns 0x00 (0000ms, 0542ms total) +T8DC0 000:559 JLINK_ReadMem (0xE0041FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0041FF0) - Data: 0D 00 00 00 90 00 00 00 05 00 00 00 B1 00 00 00 returns 0x00 (0001ms, 0543ms total) +T8DC0 000:560 JLINK_ReadMem (0xE0041FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0041FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... returns 0x00 (0000ms, 0543ms total) +T8DC0 000:560 JLINK_ReadMemU32(0xE000ED00, 0x0001 Items, ...) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000ED00) - Data: 31 C2 2F 41 returns 0x01 (0001ms, 0544ms total) +T8DC0 000:561 JLINK_SetResetType(JLINKARM_RESET_TYPE_NORMAL) returns JLINKARM_RESET_TYPE_NORMAL (0000ms, 0544ms total) +T8DC0 000:561 JLINK_Reset() -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000ED0C) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0) >0x80 JTAG> >0x40 JTAG> >0x30 JTAG> + >0x40 JTAG> >0x50 JTAG> >0x40 JTAG> -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU_WriteMem(4 bytes @ 0xE0001028) -- CPU_WriteMem(4 bytes @ 0xE0001038) -- CPU_WriteMem(4 bytes @ 0xE0001048) -- CPU_WriteMem(4 bytes @ 0xE0001058) -- CPU_WriteMem(4 bytes @ 0xE0002000) -- CPU_ReadMem(4 bytes @ 0xE000EDFC) -- CPU_ReadMem(4 bytes @ 0xE0001000) (0021ms, 0565ms total) +T8DC0 000:582 JLINK_ReadReg(R15 (PC)) returns 0x08000258 (0000ms, 0565ms total) +T8DC0 000:582 JLINK_ReadReg(XPSR) returns 0x01000000 (0000ms, 0565ms total) +T8DC0 000:582 JLINK_Halt() returns 0x00 (0000ms, 0565ms total) +T8DC0 000:582 JLINK_IsHalted() returns TRUE (0000ms, 0565ms total) +T8DC0 000:582 JLINK_ReadMemU32(0xE000EDF0, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) - Data: 03 00 03 00 returns 0x01 (0000ms, 0565ms total) +T8DC0 000:582 JLINK_WriteU32(0xE000EDF0, 0xA05F0003) -- CPU_WriteMem(4 bytes @ 0xE000EDF0) returns 0x00 (0001ms, 0566ms total) +T8DC0 000:583 JLINK_WriteU32(0xE000EDFC, 0x01000000) -- CPU_WriteMem(4 bytes @ 0xE000EDFC) returns 0x00 (0000ms, 0566ms total) +T8DC0 000:583 JLINK_GetHWStatus(...) returns 0x00 (0001ms, 0567ms total) +T8DC0 000:584 JLINK_GetNumBPUnits(Type = 0xFFFFFF00) returns 0x06 (0000ms, 0567ms total) +T8DC0 000:584 JLINK_GetNumBPUnits(Type = 0xF0) returns 0x2000 (0000ms, 0567ms total) +T8DC0 000:584 JLINK_GetNumWPUnits() returns 0x04 (0000ms, 0567ms total) +T8DC0 000:584 JLINK_GetSpeed() returns 0x2EE0 (0000ms, 0567ms total) +T8DC0 000:584 JLINK_ReadMemU32(0xE000E004, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000E004) - Data: 02 00 00 00 returns 0x01 (0001ms, 0568ms total) +T8DC0 000:585 JLINK_ReadMemU32(0xE000E004, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000E004) - Data: 02 00 00 00 returns 0x01 (0000ms, 0568ms total) +T8DC0 000:585 JLINK_WriteMem(0xE0001000, 0x001C Bytes, ...) - Data: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... -- CPU_WriteMem(28 bytes @ 0xE0001000) returns 0x1C (0001ms, 0569ms total) +T8DC0 000:586 JLINK_ReadMem (0xE0001000, 0x001C Bytes, ...) -- CPU_ReadMem(28 bytes @ 0xE0001000) - Data: 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 ... returns 0x00 (0000ms, 0569ms total) +T8DC0 000:586 JLINK_ReadReg(R15 (PC)) returns 0x08000258 (0000ms, 0569ms total) +T8DC0 000:586 JLINK_ReadReg(XPSR) returns 0x01000000 (0000ms, 0569ms total) +T8DC0 000:690 JLINK_SetResetType(JLINKARM_RESET_TYPE_NORMAL) returns JLINKARM_RESET_TYPE_NORMAL (0000ms, 0569ms total) +T8DC0 000:690 JLINK_Reset() -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU_WriteMem(4 bytes @ 0xE000ED0C) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0) >0x80 JTAG> >0x40 JTAG> >0x30 JTAG> >0x40 JTAG> >0x50 JTAG> >0x40 JTAG> -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU_WriteMem(4 bytes @ 0xE0001028) + -- CPU_WriteMem(4 bytes @ 0xE0001038) -- CPU_WriteMem(4 bytes @ 0xE0001048) -- CPU_WriteMem(4 bytes @ 0xE0001058) -- CPU_WriteMem(4 bytes @ 0xE0002000) -- CPU_ReadMem(4 bytes @ 0xE000EDFC) -- CPU_ReadMem(4 bytes @ 0xE0001000) (0022ms, 0591ms total) +T8DC0 000:712 JLINK_ReadReg(R15 (PC)) returns 0x08000258 (0000ms, 0591ms total) +T8DC0 000:712 JLINK_ReadReg(XPSR) returns 0x01000000 (0000ms, 0591ms total) +T8DC0 000:712 JLINK_ReadMem (0x08000258, 0x003C Bytes, ...) -- CPU_ReadMem(60 bytes @ 0x08000258) - Data: 06 48 80 47 06 48 00 47 FE E7 FE E7 FE E7 FE E7 ... returns 0x00 (0001ms, 0592ms total) +T8DC0 001:541 JLINK_ReadMem (0x00000000, 0x0027 Bytes, ...) -- CPU_ReadMem(39 bytes @ 0x00000000) - Data: C8 30 00 20 59 02 00 08 61 02 00 08 09 02 00 08 ... returns 0x00 (0001ms, 0593ms total) +T8C84 002:012 JLINK_SetBPEx(Addr = 0x08000676, Type = 0xFFFFFFF2) returns 0x00000001 (0000ms, 0593ms total) +T8C84 002:012 JLINK_Go() -- CPU_WriteMem(4 bytes @ 0xE0002008) -- CPU_WriteMem(4 bytes @ 0xE000200C) -- CPU_WriteMem(4 bytes @ 0xE0002010) -- CPU_WriteMem(4 bytes @ 0xE0002014) -- CPU_WriteMem(4 bytes @ 0xE0002018) -- CPU_WriteMem(4 bytes @ 0xE000201C) -- CPU_WriteMem(4 bytes @ 0xE0001004) (0003ms, 0596ms total) +T8C84 002:115 JLINK_IsHalted() returns TRUE (0002ms, 0598ms total) +T8C84 002:117 JLINK_Halt() returns 0x00 (0000ms, 0596ms total) +T8C84 002:117 JLINK_IsHalted() returns TRUE (0000ms, 0596ms total) +T8C84 002:117 JLINK_IsHalted() returns TRUE (0000ms, 0596ms total) +T8C84 002:117 JLINK_IsHalted() returns TRUE (0000ms, 0596ms total) +T8C84 002:117 JLINK_ReadReg(R15 (PC)) returns 0x08000676 (0000ms, 0596ms total) +T8C84 002:117 JLINK_ReadReg(XPSR) returns 0x61000000 (0000ms, 0596ms total) +T8C84 002:117 JLINK_ClrBPEx(BPHandle = 0x00000001) returns 0x00 (0000ms, 0596ms total) +T8C84 002:117 JLINK_ReadMemU32(0xE000ED30, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000ED30) - Data: 03 00 00 00 returns 0x01 (0000ms, 0596ms total) +T8C84 002:117 JLINK_ReadMemU32(0xE0001028, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001028) - Data: 00 00 00 00 returns 0x01 (0001ms, 0597ms total) +T8C84 002:118 JLINK_ReadMemU32(0xE0001038, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001038) - Data: 00 02 00 00 returns 0x01 (0000ms, 0597ms total) +T8C84 002:118 JLINK_ReadMemU32(0xE0001048, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001048) - Data: 00 00 00 00 returns 0x01 (0000ms, 0597ms total) +T8C84 002:118 JLINK_ReadMemU32(0xE0001058, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001058) - Data: 00 00 00 00 returns 0x01 (0001ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R0) returns 0x08000677 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R1) returns 0x200030C8 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R2) returns 0x00000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R3) returns 0x0800150D (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R4) returns 0x0801B070 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R5) returns 0x0801B070 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R6) returns 0x00000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R7) returns 0x00000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R8) returns 0x00000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R9) returns 0x200001E0 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R10) returns 0x00000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R11) returns 0x00000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R12) returns 0x00000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R13 (SP)) returns 0x200030C8 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R14) returns 0x080005FD (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(R15 (PC)) returns 0x08000676 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(XPSR) returns 0x61000000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(MSP) returns 0x200030C8 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(PSP) returns 0x20001000 (0000ms, 0598ms total) +T8C84 002:119 JLINK_ReadReg(CFBP) returns 0x00000000 (0000ms, 0598ms total) +T8DC0 002:264 JLINK_ReadMem (0x08000676, 0x0002 Bytes, ...) -- CPU_ReadMem(64 bytes @ 0x08000640) -- Updating DA cache (64 bytes @ 0x08000640) -- Read from DA cache (2 bytes @ 0x08000676) - Data: 10 B5 returns 0x00 (0001ms, 0599ms total) +T8DC0 002:265 JLINK_ReadMem (0x08000678, 0x003C Bytes, ...) -- CPU_ReadMem(64 bytes @ 0x08000680) -- Updating DA cache (64 bytes @ 0x08000680) -- Read from DA cache (60 bytes @ 0x08000678) - Data: 14 F0 D9 FE 00 20 10 BD 10 B5 11 F0 FD F8 00 20 ... returns 0x00 (0000ms, 0599ms total) +T8C84 003:721 JLINK_Go() -- CPU_WriteMem(4 bytes @ 0xE0002008) (0002ms, 0601ms total) +T8C84 003:824 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 003:925 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:025 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:126 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:227 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:327 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:428 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:529 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:630 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:730 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:831 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 004:932 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 005:033 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 005:133 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 005:234 JLINK_IsHalted() returns FALSE (0000ms, 0601ms total) +T8C84 005:335 JLINK_Halt() returns 0x00 (0002ms, 0603ms total) +T8C84 005:337 JLINK_IsHalted() returns TRUE (0000ms, 0603ms total) +T8C84 005:337 JLINK_IsHalted() returns TRUE (0000ms, 0603ms total) +T8C84 005:337 JLINK_IsHalted() returns TRUE (0000ms, 0603ms total) +T8C84 005:337 JLINK_ReadReg(R15 (PC)) returns 0x08000164 (0000ms, 0603ms total) +T8C84 005:337 JLINK_ReadReg(XPSR) returns 0x61000000 (0000ms, 0603ms total) +T8C84 005:337 JLINK_ReadMemU32(0xE000ED30, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000ED30) - Data: 01 00 00 00 returns 0x01 (0000ms, 0603ms total) +T8C84 005:337 JLINK_ReadMemU32(0xE0001028, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001028) - Data: 00 00 00 00 returns 0x01 (0001ms, 0604ms total) +T8C84 005:338 JLINK_ReadMemU32(0xE0001038, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001038) - Data: 00 02 00 00 returns 0x01 (0000ms, 0604ms total) +T8C84 005:338 JLINK_ReadMemU32(0xE0001048, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001048) - Data: 00 00 00 00 returns 0x01 (0001ms, 0605ms total) +T8C84 005:339 JLINK_ReadMemU32(0xE0001058, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE0001058) - Data: 00 00 00 00 returns 0x01 (0000ms, 0605ms total) +T8C84 005:339 JLINK_ReadReg(R0) returns 0x20001044 (0000ms, 0605ms total) +T8C84 005:339 JLINK_ReadReg(R1) returns 0x200003A4 (0001ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R2) returns 0x00000000 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R3) returns 0x00000000 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R4) returns 0x00000004 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R5) returns 0x00000000 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R6) returns 0xDEADBEEF (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R7) returns 0xDEADBEEF (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R8) returns 0xDEADBEEF (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R9) returns 0xDEADBEEF (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R10) returns 0xDEADBEEF (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R11) returns 0xDEADBEEF (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R12) returns 0x00000000 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R13 (SP)) returns 0x20001028 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R14) returns 0x080105C5 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(R15 (PC)) returns 0x08000164 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(XPSR) returns 0x61000000 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(MSP) returns 0x200030A8 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(PSP) returns 0x20001028 (0000ms, 0606ms total) +T8C84 005:340 JLINK_ReadReg(CFBP) returns 0x02000000 (0000ms, 0606ms total) +T8DC0 005:341 JLINK_ReadMem (0x2000103C, 0x0004 Bytes, ...) -- CPU_ReadMem(4 bytes @ 0x2000103C) - Data: 47 46 01 08 returns 0x00 (0001ms, 0607ms total) +T8DC0 005:342 JLINK_ReadMem (0x20001028, 0x0004 Bytes, ...) -- CPU_ReadMem(4 bytes @ 0x20001028) - Data: 04 00 00 00 returns 0x00 (0000ms, 0607ms total) +T8DC0 005:342 JLINK_ReadMem (0x2000102C, 0x0004 Bytes, ...) -- CPU_ReadMem(4 bytes @ 0x2000102C) - Data: 00 00 00 00 returns 0x00 (0000ms, 0607ms total) +T8DC0 005:342 JLINK_ReadMem (0x20001030, 0x0004 Bytes, ...) -- CPU_ReadMem(4 bytes @ 0x20001030) - Data: EF BE AD DE returns 0x00 (0001ms, 0608ms total) +T8DC0 005:343 JLINK_ReadMem (0x20001034, 0x0004 Bytes, ...) -- CPU_ReadMem(4 bytes @ 0x20001034) - Data: EF BE AD DE returns 0x00 (0000ms, 0608ms total) +T8DC0 005:343 JLINK_ReadMem (0x20001038, 0x0004 Bytes, ...) -- CPU_ReadMem(4 bytes @ 0x20001038) - Data: EF BE AD DE returns 0x00 (0001ms, 0609ms total) +T8DC0 005:354 JLINK_ReadMem (0x08000164, 0x003C Bytes, ...) -- CPU_ReadMem(128 bytes @ 0x08000140) -- Updating DA cache (128 bytes @ 0x08000140) -- Read from DA cache (60 bytes @ 0x08000164) - Data: EF F3 10 80 72 B6 70 47 80 F3 10 88 70 47 32 4A ... returns 0x00 (0001ms, 0610ms total) +T8DC0 006:021 JLINK_Close() >0x80 JTAG> >0x08 JTAG> (0001ms, 0611ms total) +T8DC0 006:021 (0001ms, 0611ms total) +T8DC0 006:021 Closed (0001ms, 0611ms total) diff --git a/bsp/gd32105c-eval/JLinkSettings.ini b/bsp/gd32105c-eval/JLinkSettings.ini new file mode 100644 index 0000000000000000000000000000000000000000..706cf39a99bb510d07ff75a910761c435d590fa3 --- /dev/null +++ b/bsp/gd32105c-eval/JLinkSettings.ini @@ -0,0 +1,35 @@ +[BREAKPOINTS] +ForceImpTypeAny = 0 +ShowInfoWin = 1 +EnableFlashBP = 2 +BPDuringExecution = 0 +[CFI] +CFISize = 0x00 +CFIAddr = 0x00 +[CPU] +OverrideMemMap = 0 +AllowSimulation = 1 +ScriptFile="" +[FLASH] +CacheExcludeSize = 0x00 +CacheExcludeAddr = 0x00 +MinNumBytesFlashDL = 0 +SkipProgOnCRCMatch = 1 +VerifyDownload = 1 +AllowCaching = 1 +EnableFlashDL = 2 +Override = 1 +Device="Unspecified" +[GENERAL] +WorkRAMSize = 0x00 +WorkRAMAddr = 0x00 +RAMUsageLimit = 0x00 +[SWO] +SWOLogFile="" +[MEM] +RdOverrideOrMask = 0x00 +RdOverrideAndMask = 0xFFFFFFFF +RdOverrideAddr = 0xFFFFFFFF +WrOverrideOrMask = 0x00 +WrOverrideAndMask = 0xFFFFFFFF +WrOverrideAddr = 0xFFFFFFFF diff --git a/bsp/gd32105c-eval/Kconfig b/bsp/gd32105c-eval/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..3050d65e2699383064f7824618e6af69603122b3 --- /dev/null +++ b/bsp/gd32105c-eval/Kconfig @@ -0,0 +1,25 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "drivers/Kconfig" + + + + + diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Include/gd32f10x.h b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Include/gd32f10x.h new file mode 100644 index 0000000000000000000000000000000000000000..e525f3c0c670019b68211813a97deef3682588b6 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Include/gd32f10x.h @@ -0,0 +1,381 @@ +/*! + \file gd32f10x.h + \brief general definitions for GD32F10x + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_H +#define GD32F10X_H + +#ifdef cplusplus + extern "C" { +#endif + +/* define GD32F10x */ +#if !defined (GD32F10X_MD) && !defined (GD32F10X_HD) && !defined (GD32F10X_XD) && !defined (GD32F10X_CL) + /* #define GD32F10X_MD */ /*!< GD32F10X_MD: GD32 Medium density devices */ + /* #define GD32F10X_HD */ /*!< GD32F10X_HD: GD32 High density Value Line devices */ + /* #define GD32F10X_XD */ /*!< GD32F10X_XD: GD32 Extra density devices */ + /* #define GD32F10X_CL */ /*!< GD32F10X_CL: GD32 Connectivity line devices */ +#endif /* define GD32F10x */ + +#if !defined (GD32F10X_MD) && !defined (GD32F10X_HD) && !defined (GD32F10X_XD) && !defined (GD32F10X_CL) + #error "Please select the target GD32F10x device in gd32f10x.h file" +#endif /* undefine GD32F10x tip */ + +/* define value of high speed crystal oscillator (HXTAL) in Hz */ +#if !defined HXTAL_VALUE +#ifdef GD32F10X_CL +#define HXTAL_VALUE ((uint32_t)25000000) /*!< value of the external oscillator in Hz */ +#else +#define HXTAL_VALUE ((uint32_t)8000000) /* !< from 4M to 16M *!< value of the external oscillator in Hz*/ +#endif /* HXTAL_VALUE */ +#endif /* high speed crystal oscillator value */ + +/* define startup timeout value of high speed crystal oscillator (HXTAL) */ +#if !defined (HXTAL_STARTUP_TIMEOUT) +#define HXTAL_STARTUP_TIMEOUT ((uint16_t)0xFFFF) +#endif /* high speed crystal oscillator startup timeout */ + +/* define value of internal 8MHz RC oscillator (IRC8M) in Hz */ +#if !defined (IRC8M_VALUE) +#define IRC8M_VALUE ((uint32_t)8000000) +#endif /* internal 8MHz RC oscillator value */ + +/* define startup timeout value of internal 8MHz RC oscillator (IRC8M) */ +#if !defined (IRC8M_STARTUP_TIMEOUT) +#define IRC8M_STARTUP_TIMEOUT ((uint16_t)0x0500) +#endif /* internal 8MHz RC oscillator startup timeout */ + +/* define value of internal 40KHz RC oscillator(IRC40K) in Hz */ +#if !defined (IRC40K_VALUE) +#define IRC40K_VALUE ((uint32_t)40000) +#endif /* internal 40KHz RC oscillator value */ + +/* define value of low speed crystal oscillator (LXTAL)in Hz */ +#if !defined (LXTAL_VALUE) +#define LXTAL_VALUE ((uint32_t)32768) +#endif /* low speed crystal oscillator value */ + +/* GD32F10x firmware library version number V2.0 */ +#define __GD32F10x_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __GD32F10x_STDPERIPH_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __GD32F10x_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __GD32F10x_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __GD32F10x_STDPERIPH_VERSION ((__GD32F10x_STDPERIPH_VERSION_MAIN << 24)\ + |(__GD32F10x_STDPERIPH_VERSION_SUB1 << 16)\ + |(__GD32F10x_STDPERIPH_VERSION_SUB2 << 8)\ + |(__GD32F10x_STDPERIPH_VERSION_RC)) + +/* configuration of the Cortex-M3 processor and core peripherals */ +#define __MPU_PRESENT 0 /*!< GD32F10x do not provide MPU */ +#define __NVIC_PRIO_BITS 4 /*!< GD32F10x uses 4 bits for the priority levels */ +#define __Vendor_SysTickConfig 0 /*!< set to 1 if different sysTick config is used */ +/* define interrupt number */ +typedef enum IRQn +{ + /* Cortex-M3 processor exceptions numbers */ + NonMaskableInt_IRQn = -14, /*!< 2 non maskable interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 memory management interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 bus fault interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 usage fault interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV call interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 debug monitor interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 pend SV interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 system tick interrupt */ + + /* interruput numbers */ + WWDGT_IRQn = 0, /*!< window watchDog timer interrupt */ + LVD_IRQn = 1, /*!< LVD through EXTI line detect interrupt */ + TAMPER_IRQn = 2, /*!< tamper through EXTI line detect */ + RTC_IRQn = 3, /*!< RTC through EXTI line interrupt */ + FMC_IRQn = 4, /*!< FMC interrupt */ + RCU_CTC_IRQn = 5, /*!< RCU and CTC interrupt */ + EXTI0_IRQn = 6, /*!< EXTI line 0 interrupts */ + EXTI1_IRQn = 7, /*!< EXTI line 1 interrupts */ + EXTI2_IRQn = 8, /*!< EXTI line 2 interrupts */ + EXTI3_IRQn = 9, /*!< EXTI line 3 interrupts */ + EXTI4_IRQn = 10, /*!< EXTI line 4 interrupts */ + DMA0_Channel0_IRQn = 11, /*!< DMA0 channel0 interrupt */ + DMA0_Channel1_IRQn = 12, /*!< DMA0 channel1 interrupt */ + DMA0_Channel2_IRQn = 13, /*!< DMA0 channel2 interrupt */ + DMA0_Channel3_IRQn = 14, /*!< DMA0 channel3 interrupt */ + DMA0_Channel4_IRQn = 15, /*!< DMA0 channel4 interrupt */ + DMA0_Channel5_IRQn = 16, /*!< DMA0 channel5 interrupt */ + DMA0_Channel6_IRQn = 17, /*!< DMA0 channel6 interrupt */ + ADC0_1_IRQn = 18, /*!< ADC0 and ADC1 interrupt */ + +#ifdef GD32F10X_MD + USBD_HP_CAN0_TX_IRQn = 19, /*!< CAN0 TX interrupts */ + USBD_LP_CAN0_RX0_IRQn = 20, /*!< CAN0 RX0 interrupts */ + CAN0_RX1_IRQn = 21, /*!< CAN0 RX1 interrupts */ + CAN0_EWMC_IRQn = 22, /*!< CAN0 EWMC interrupts */ + EXTI5_9_IRQn = 23, /*!< EXTI[9:5] interrupts */ + TIMER0_BRK_IRQn = 24, /*!< TIMER0 break interrupts */ + TIMER0_UP_IRQn = 25, /*!< TIMER0 update interrupts */ + TIMER0_TRG_CMT_IRQn = 26, /*!< TIMER0 trigger and commutation interrupts */ + TIMER0_Channel_IRQn = 27, /*!< TIMER0 channel capture compare interrupts */ + TIMER1_IRQn = 28, /*!< TIMER1 interrupt */ + TIMER2_IRQn = 29, /*!< TIMER2 interrupt */ + TIMER3_IRQn = 30, /*!< TIMER3 interrupts */ + I2C0_EV_IRQn = 31, /*!< I2C0 event interrupt */ + I2C0_ER_IRQn = 32, /*!< I2C0 error interrupt */ + I2C1_EV_IRQn = 33, /*!< I2C1 event interrupt */ + I2C1_ER_IRQn = 34, /*!< I2C1 error interrupt */ + SPI0_IRQn = 35, /*!< SPI0 interrupt */ + SPI1_IRQn = 36, /*!< SPI1 interrupt */ + USART0_IRQn = 37, /*!< USART0 interrupt */ + USART1_IRQn = 38, /*!< USART1 interrupt */ + USART2_IRQn = 39, /*!< USART2 interrupt */ + EXTI10_15_IRQn = 40, /*!< EXTI[15:10] interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC alarm interrupt */ + USBD_WKUP_IRQn = 42, /*!< USBD Wakeup interrupt */ + EXMC_IRQn = 48, /*!< EXMC global interrupt */ +#endif /* GD32F10X_MD */ + +#ifdef GD32F10X_HD + USBD_HP_CAN0_TX_IRQn = 19, /*!< CAN0 TX interrupts */ + USBD_LP_CAN0_RX0_IRQn = 20, /*!< CAN0 RX0 interrupts */ + CAN0_RX1_IRQn = 21, /*!< CAN0 RX1 interrupts */ + CAN0_EWMC_IRQn = 22, /*!< CAN0 EWMC interrupts */ + EXTI5_9_IRQn = 23, /*!< EXTI[9:5] interrupts */ + TIMER0_BRK_IRQn = 24, /*!< TIMER0 break interrupts */ + TIMER0_UP_IRQn = 25, /*!< TIMER0 update interrupts */ + TIMER0_TRG_CMT_IRQn = 26, /*!< TIMER0 trigger and commutation interrupts */ + TIMER0_Channel_IRQn = 27, /*!< TIMER0 channel capture compare interrupts */ + TIMER1_IRQn = 28, /*!< TIMER1 interrupt */ + TIMER2_IRQn = 29, /*!< TIMER2 interrupt */ + TIMER3_IRQn = 30, /*!< TIMER3 interrupts */ + I2C0_EV_IRQn = 31, /*!< I2C0 event interrupt */ + I2C0_ER_IRQn = 32, /*!< I2C0 error interrupt */ + I2C1_EV_IRQn = 33, /*!< I2C1 event interrupt */ + I2C1_ER_IRQn = 34, /*!< I2C1 error interrupt */ + SPI0_IRQn = 35, /*!< SPI0 interrupt */ + SPI1_IRQn = 36, /*!< SPI1 interrupt */ + USART0_IRQn = 37, /*!< USART0 interrupt */ + USART1_IRQn = 38, /*!< USART1 interrupt */ + USART2_IRQn = 39, /*!< USART2 interrupt */ + EXTI10_15_IRQn = 40, /*!< EXTI[15:10] interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC alarm interrupt */ + USBD_WKUP_IRQn = 42, /*!< USBD Wakeup interrupt */ + TIMER7_BRK_IRQn = 43, /*!< TIMER7 break interrupts */ + TIMER7_UP_IRQn = 44, /*!< TIMER7 update interrupts */ + TIMER7_TRG_CMT_IRQn = 45, /*!< TIMER7 trigger and commutation interrupts */ + TIMER7_Channel_IRQn = 46, /*!< TIMER7 channel capture compare interrupts */ + ADC2_IRQn = 47, /*!< ADC2 global interrupt */ + EXMC_IRQn = 48, /*!< EXMC global interrupt */ + SDIO_IRQn = 49, /*!< SDIO global interrupt */ + TIMER4_IRQn = 50, /*!< TIMER4 global interrupt */ + SPI2_IRQn = 51, /*!< SPI2 global interrupt */ + UART3_IRQn = 52, /*!< UART3 global interrupt */ + UART4_IRQn = 53, /*!< UART4 global interrupt */ + TIMER5_IRQn = 54, /*!< TIMER5 global interrupt */ + TIMER6_IRQn = 55, /*!< TIMER6 global interrupt */ + DMA1_Channel0_IRQn = 56, /*!< DMA1 channel0 global interrupt */ + DMA1_Channel1_IRQn = 57, /*!< DMA1 channel1 global interrupt */ + DMA1_Channel2_IRQn = 58, /*!< DMA1 channel2 global interrupt */ + DMA1_Channel3_Channel4_IRQn = 59, /*!< DMA1 channel3 and channel4 global Interrupt */ +#endif /* GD32F10X_HD */ + +#ifdef GD32F10X_XD + USBD_HP_CAN0_TX_IRQn = 19, /*!< CAN0 TX interrupts */ + USBD_LP_CAN0_RX0_IRQn = 20, /*!< CAN0 RX0 interrupts */ + CAN0_RX1_IRQn = 21, /*!< CAN0 RX1 interrupts */ + CAN0_EWMC_IRQn = 22, /*!< CAN0 EWMC interrupts */ + EXTI5_9_IRQn = 23, /*!< EXTI[9:5] interrupts */ + TIMER0_BRK_TIMER8_IRQn = 24, /*!< TIMER0 break and TIMER8 interrupts */ + TIMER0_UP_TIMER9_IRQn = 25, /*!< TIMER0 update and TIMER9 interrupts */ + TIMER0_TRG_CMT_TIMER10_IRQn = 26, /*!< TIMER0 trigger and commutation and TIMER10 interrupts */ + TIMER0_Channel_IRQn = 27, /*!< TIMER0 channel capture compare interrupts */ + TIMER1_IRQn = 28, /*!< TIMER1 interrupt */ + TIMER2_IRQn = 29, /*!< TIMER2 interrupt */ + TIMER3_IRQn = 30, /*!< TIMER3 interrupts */ + I2C0_EV_IRQn = 31, /*!< I2C0 event interrupt */ + I2C0_ER_IRQn = 32, /*!< I2C0 error interrupt */ + I2C1_EV_IRQn = 33, /*!< I2C1 event interrupt */ + I2C1_ER_IRQn = 34, /*!< I2C1 error interrupt */ + SPI0_IRQn = 35, /*!< SPI0 interrupt */ + SPI1_IRQn = 36, /*!< SPI1 interrupt */ + USART0_IRQn = 37, /*!< USART0 interrupt */ + USART1_IRQn = 38, /*!< USART1 interrupt */ + USART2_IRQn = 39, /*!< USART2 interrupt */ + EXTI10_15_IRQn = 40, /*!< EXTI[15:10] interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC alarm interrupt */ + USBD_WKUP_IRQn = 42, /*!< USBD wakeup interrupt */ + TIMER7_BRK_TIMER11_IRQn = 43, /*!< TIMER7 break and TIMER11 interrupts */ + TIMER7_UP_TIMER12_IRQn = 44, /*!< TIMER7 update and TIMER12 interrupts */ + TIMER7_TRG_CMT_TIMER13_IRQn = 45, /*!< TIMER7 trigger and commutation and TIMER13 interrupts */ + TIMER7_Channel_IRQn = 46, /*!< TIMER7 channel capture compare interrupts */ + ADC2_IRQn = 47, /*!< ADC2 global interrupt */ + EXMC_IRQn = 48, /*!< EXMC global interrupt */ + SDIO_IRQn = 49, /*!< SDIO global interrupt */ + TIMER4_IRQn = 50, /*!< TIMER4 global interrupt */ + SPI2_IRQn = 51, /*!< SPI2 global interrupt */ + UART3_IRQn = 52, /*!< UART3 global interrupt */ + UART4_IRQn = 53, /*!< UART4 global interrupt */ + TIMER5_IRQn = 54, /*!< TIMER5 global interrupt */ + TIMER6_IRQn = 55, /*!< TIMER6 global interrupt */ + DMA1_Channel0_IRQn = 56, /*!< DMA1 channel0 global interrupt */ + DMA1_Channel1_IRQn = 57, /*!< DMA1 channel1 global interrupt */ + DMA1_Channel2_IRQn = 58, /*!< DMA1 channel2 global interrupt */ + DMA1_Channel3_Channel4_IRQn = 59, /*!< DMA1 channel3 and channel4 global interrupt */ +#endif /* GD32F10X_XD */ + +#ifdef GD32F10X_CL + CAN0_TX_IRQn = 19, /*!< CAN0 TX interrupts */ + CAN0_RX0_IRQn = 20, /*!< CAN0 RX0 interrupts */ + CAN0_RX1_IRQn = 21, /*!< CAN0 RX1 interrupts */ + CAN0_EWMC_IRQn = 22, /*!< CAN0 EWMC interrupts */ + EXTI5_9_IRQn = 23, /*!< EXTI[9:5] interrupts */ + TIMER0_BRK_IRQn = 24, /*!< TIMER0 break interrupts */ + TIMER0_UP_IRQn = 25, /*!< TIMER0 update interrupts */ + TIMER0_TRG_CMT_IRQn = 26, /*!< TIMER0 trigger and commutation interrupts */ + TIMER0_Channel_IRQn = 27, /*!< TIMER0 channel capture compare interrupts */ + TIMER1_IRQn = 28, /*!< TIMER1 interrupt */ + TIMER2_IRQn = 29, /*!< TIMER2 interrupt */ + TIMER3_IRQn = 30, /*!< TIMER3 interrupts */ + I2C0_EV_IRQn = 31, /*!< I2C0 event interrupt */ + I2C0_ER_IRQn = 32, /*!< I2C0 error interrupt */ + I2C1_EV_IRQn = 33, /*!< I2C1 event interrupt */ + I2C1_ER_IRQn = 34, /*!< I2C1 error interrupt */ + SPI0_IRQn = 35, /*!< SPI0 interrupt */ + SPI1_IRQn = 36, /*!< SPI1 interrupt */ + USART0_IRQn = 37, /*!< USART0 interrupt */ + USART1_IRQn = 38, /*!< USART1 interrupt */ + USART2_IRQn = 39, /*!< USART2 interrupt */ + EXTI10_15_IRQn = 40, /*!< EXTI[15:10] interrupts */ + RTC_ALARM_IRQn = 41, /*!< RTC alarm interrupt */ + USBFS_WKUP_IRQn = 42, /*!< USBFS wakeup interrupt */ + TIMER7_BRK_IRQn = 43, /*!< TIMER7 break interrupts */ + TIMER7_UP_IRQn = 44, /*!< TIMER7 update interrupts */ + TIMER7_TRG_CMT_IRQn = 45, /*!< TIMER7 trigger and commutation interrupts */ + TIMER7_Channel_IRQn = 46, /*!< TIMER7 channel capture compare interrupts */ + EXMC_IRQn = 48, /*!< EXMC global interrupt */ + TIMER4_IRQn = 50, /*!< TIMER4 global interrupt */ + SPI2_IRQn = 51, /*!< SPI2 global interrupt */ + UART3_IRQn = 52, /*!< UART3 global interrupt */ + UART4_IRQn = 53, /*!< UART4 global interrupt */ + TIMER5_IRQn = 54, /*!< TIMER5 global interrupt */ + TIMER6_IRQn = 55, /*!< TIMER6 global interrupt */ + DMA1_Channel0_IRQn = 56, /*!< DMA1 channel0 global interrupt */ + DMA1_Channel1_IRQn = 57, /*!< DMA1 channel1 global interrupt */ + DMA1_Channel2_IRQn = 58, /*!< DMA1 channel2 global interrupt */ + DMA1_Channel3_IRQn = 59, /*!< DMA1 channel3 global interrupt */ + DMA1_Channel4_IRQn = 60, /*!< DMA1 channel3 global interrupt */ + ENET_IRQn = 61, /*!< ENET global interrupt */ + ENET_WKUP_IRQn = 62, /*!< ENET Wakeup interrupt */ + CAN1_TX_IRQn = 63, /*!< CAN1 TX interrupt */ + CAN1_RX0_IRQn = 64, /*!< CAN1 RX0 interrupt */ + CAN1_RX1_IRQn = 65, /*!< CAN1 RX1 interrupt */ + CAN1_EWMC_IRQn = 66, /*!< CAN1 EWMC interrupt */ + USBFS_IRQn = 67, /*!< USBFS global interrupt */ +#endif /* GD32F10X_CL */ + +} IRQn_Type; + +/* includes */ +#include "core_cm3.h" +#include "system_gd32f10x.h" +#include + +/* enum definitions */ +typedef enum {DISABLE = 0, ENABLE = !DISABLE} EventStatus, ControlStatus; +typedef enum {FALSE = 0, TRUE = !FALSE} bool; +typedef enum {RESET = 0, SET = !RESET} FlagStatus; +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrStatus; + +/* bit operations */ +#define REG32(addr) (*(volatile uint32_t *)(uint32_t)(addr)) +#define REG16(addr) (*(volatile uint16_t *)(uint32_t)(addr)) +#define REG8(addr) (*(volatile uint8_t *)(uint32_t)(addr)) +#define BIT(x) ((uint32_t)((uint32_t)0x01U<<(x))) +#define BITS(start, end) ((0xFFFFFFFFUL << (start)) & (0xFFFFFFFFUL >> (31U - (uint32_t)(end)))) +#define GET_BITS(regval, start, end) (((regval) & BITS((start),(end))) >> (start)) + +/* main flash and SRAM memory map */ +#define FLASH_BASE ((uint32_t)0x08000000U) /*!< main FLASH base address */ +#define SRAM_BASE ((uint32_t)0x20000000U) /*!< SRAM0 base address */ +#define OB_BASE ((uint32_t)0x1FFFF800U) /*!< OB base address */ +#define DBG_BASE ((uint32_t)0xE0042000U) /*!< DBG base address */ +#define EXMC_BASE ((uint32_t)0xA0000000U) /*!< EXMC register base address */ + +/* peripheral memory map */ +#define APB1_BUS_BASE ((uint32_t)0x40000000U) /*!< apb1 base address */ +#define APB2_BUS_BASE ((uint32_t)0x40010000U) /*!< apb2 base address */ +#define AHB1_BUS_BASE ((uint32_t)0x40018000U) /*!< ahb1 base address */ +#define AHB3_BUS_BASE ((uint32_t)0x60000000U) /*!< ahb3 base address */ + +/* advanced peripheral bus 1 memory map */ +#define TIMER_BASE (APB1_BUS_BASE + 0x00000000U) /*!< TIMER base address */ +#define RTC_BASE (APB1_BUS_BASE + 0x00002800U) /*!< RTC base address */ +#define WWDGT_BASE (APB1_BUS_BASE + 0x00002C00U) /*!< WWDGT base address */ +#define FWDGT_BASE (APB1_BUS_BASE + 0x00003000U) /*!< FWDGT base address */ +#define SPI_BASE (APB1_BUS_BASE + 0x00003800U) /*!< SPI base address */ +#define USART_BASE (APB1_BUS_BASE + 0x00004400U) /*!< USART base address */ +#define I2C_BASE (APB1_BUS_BASE + 0x00005400U) /*!< I2C base address */ +#define USBD_BASE (APB1_BUS_BASE + 0x00005C00U) /*!< USBD base address */ +#define USBD_RAM_BASE (APB1_BUS_BASE + 0x00006000U) /*!< USBD RAM base address */ +#define CAN_BASE (APB1_BUS_BASE + 0x00006400U) /*!< CAN base address */ +#define BKP_BASE (APB1_BUS_BASE + 0x00006C00U) /*!< BKP base address */ +#define PMU_BASE (APB1_BUS_BASE + 0x00007000U) /*!< PMU base address */ +#define DAC_BASE (APB1_BUS_BASE + 0x00007400U) /*!< DAC base address */ + +/* advanced peripheral bus 2 memory map */ +#define AFIO_BASE (APB2_BUS_BASE + 0x00000000U) /*!< AFIO base address */ +#define EXTI_BASE (APB2_BUS_BASE + 0x00000400U) /*!< EXTI base address */ +#define GPIO_BASE (APB2_BUS_BASE + 0x00000800U) /*!< GPIO base address */ +#define ADC_BASE (APB2_BUS_BASE + 0x00002400U) /*!< ADC base address */ + +/* advanced high performance bus 1 memory map */ +#define SDIO_BASE (AHB1_BUS_BASE + 0x00000000U) /*!< SDIO base address */ +#define DMA_BASE (AHB1_BUS_BASE + 0x00008000U) /*!< DMA base address */ +#define RCU_BASE (AHB1_BUS_BASE + 0x00009000U) /*!< RCU base address */ +#define FMC_BASE (AHB1_BUS_BASE + 0x0000A000U) /*!< FMC base address */ +#define CRC_BASE (AHB1_BUS_BASE + 0x0000B000U) /*!< CRC base address */ +#define ENET_BASE (AHB1_BUS_BASE + 0x00010000U) /*!< ENET base address */ +#define USBFS_BASE (AHB1_BUS_BASE + 0x0FFE8000U) /*!< USBFS base address */ + +/* define marco USE_STDPERIPH_DRIVER */ +#if !defined USE_STDPERIPH_DRIVER +#define USE_STDPERIPH_DRIVER +#endif +#ifdef USE_STDPERIPH_DRIVER +#include "gd32f10x_libopt.h" +#endif /* USE_STDPERIPH_DRIVER */ + +#ifdef cplusplus +} +#endif +#endif diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Include/system_gd32f10x.h b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Include/system_gd32f10x.h new file mode 100644 index 0000000000000000000000000000000000000000..6bd00fb99da5246b6287ef497060ade7221f2482 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Include/system_gd32f10x.h @@ -0,0 +1,60 @@ +/*! + \file system_gd32f10x.h + \brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File for + GD32F10x Device Series +*/ + +/* + Copyright (c) 2012 ARM LIMITED + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +/* This file refers the CMSIS standard, some adjustments are made according to GigaDevice chips */ + +#ifndef SYSTEM_GD32F10X_H +#define SYSTEM_GD32F10X_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +/* system clock frequency (core clock) */ +extern uint32_t SystemCoreClock; + +/* function declarations */ +/* initialize the system and update the SystemCoreClock variable */ +extern void SystemInit(void); +/* update the SystemCoreClock with current core clock retrieved from cpu registers */ +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /* SYSTEM_GD32F10X_H */ diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_cl.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_cl.s new file mode 100644 index 0000000000000000000000000000000000000000..a3ffa4c7521d0a7fbe5586aba9a33b4dba61bcb0 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_cl.s @@ -0,0 +1,390 @@ +;/*! +; \file startup_gd32f10x_cl.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00002000 + + AREA STACK, NOINIT, READWRITE, ALIGN = 3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00002000 + + AREA HEAP, NOINIT, READWRITE, ALIGN = 3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + +; /* reset Vector Mapped to at Address 0 */ + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + +; /* external interrupts handler */ + DCD WWDGT_IRQHandler ; 16:Window Watchdog Timer + DCD LVD_IRQHandler ; 17:LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; 18:Tamper Interrupt + DCD RTC_IRQHandler ; 19:RTC through EXTI Line + DCD FMC_IRQHandler ; 20:FMC + DCD RCU_IRQHandler ; 21:RCU + DCD EXTI0_IRQHandler ; 22:EXTI Line 0 + DCD EXTI1_IRQHandler ; 23:EXTI Line 1 + DCD EXTI2_IRQHandler ; 24:EXTI Line 2 + DCD EXTI3_IRQHandler ; 25:EXTI Line 3 + DCD EXTI4_IRQHandler ; 26:EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; 27:DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; 28:DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; 29:DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; 30:DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; 31:DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; 32:DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; 33:DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; 34:ADC0 and ADC1 + DCD CAN0_TX_IRQHandler ; 35:CAN0 TX + DCD CAN0_RX0_IRQHandler ; 36:CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; 37:CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; 38:CAN0 EWMC + DCD EXTI5_9_IRQHandler ; 39:EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_IRQHandler ; 40:TIMER0 Break + DCD TIMER0_UP_IRQHandler ; 41:TIMER0 Update + DCD TIMER0_TRG_CMT_IRQHandler ; 42:TIMER0 Trigger and Commutation + DCD TIMER0_Channel_IRQHandler ; 43:TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; 44:TIMER1 + DCD TIMER2_IRQHandler ; 45:TIMER2 + DCD TIMER3_IRQHandler ; 46:TIMER3 + DCD I2C0_EV_IRQHandler ; 47:I2C0 Event + DCD I2C0_ER_IRQHandler ; 48:I2C0 Error + DCD I2C1_EV_IRQHandler ; 49:I2C1 Event + DCD I2C1_ER_IRQHandler ; 50:I2C1 Error + DCD SPI0_IRQHandler ; 51:SPI0 + DCD SPI1_IRQHandler ; 52:SPI1 + DCD USART0_IRQHandler ; 53:USART0 + DCD USART1_IRQHandler ; 54:USART1 + DCD USART2_IRQHandler ; 55:USART2 + DCD EXTI10_15_IRQHandler ; 56:EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; 57:RTC Alarm through EXTI Line + DCD USBFS_WKUP_IRQHandler ; 58:USBFS WakeUp from suspend through EXTI Line + DCD TIMER7_BRK_IRQHandler ; 59:TIMER7 Break Interrupt + DCD TIMER7_UP_IRQHandler ; 60:TIMER7 Update Interrupt + DCD TIMER7_TRG_CMT_IRQHandler ; 61:TIMER7 Trigger + DCD TIMER7_Channel_IRQHandler ; 62:TIMER7 Channel Capture Compare + DCD 0 ; Reserved + DCD EXMC_IRQHandler ; 64:EXMC + DCD 0 ; Reserved + DCD TIMER4_IRQHandler ; 66:TIMER4 + DCD SPI2_IRQHandler ; 67:SPI2 + DCD UART3_IRQHandler ; 68:UART3 + DCD UART4_IRQHandler ; 69:UART4 + DCD TIMER5_IRQHandler ; 70:TIMER5 + DCD TIMER6_IRQHandler ; 71:TIMER6 + DCD DMA1_Channel0_IRQHandler ; 72:DMA1 Channel0 + DCD DMA1_Channel1_IRQHandler ; 73:DMA1 Channel1 + DCD DMA1_Channel2_IRQHandler ; 74:DMA1 Channel2 + DCD DMA1_Channel3_IRQHandler ; 75:DMA1 Channel3 + DCD DMA1_Channel4_IRQHandler ; 76:DMA1 Channel4 + DCD ENET_IRQHandler ; 77:Ethernet + DCD ENET_WKUP_IRQHandler ; 78:Ethernet Wakeup through EXTI line + DCD CAN1_TX_IRQHandler ; 79:CAN1 TX + DCD CAN1_RX0_IRQHandler ; 80:CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; 81:CAN1 RX1 + DCD CAN1_EWMC_IRQHandler ; 82:CAN1 EWMC + DCD USBFS_IRQHandler ; 83:USBFS + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +;/* reset Handler */ +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +;/* dummy Exception Handlers */ +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP + +HardFault_Handler PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP + +MemManage_Handler PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP + +BusFault_Handler PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP + +UsageFault_Handler PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP + +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP + +DebugMon_Handler PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP + +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP + +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC +; /* external interrupts handler */ + EXPORT WWDGT_IRQHandler [WEAK] + EXPORT LVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT RCU_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA0_Channel0_IRQHandler [WEAK] + EXPORT DMA0_Channel1_IRQHandler [WEAK] + EXPORT DMA0_Channel2_IRQHandler [WEAK] + EXPORT DMA0_Channel3_IRQHandler [WEAK] + EXPORT DMA0_Channel4_IRQHandler [WEAK] + EXPORT DMA0_Channel5_IRQHandler [WEAK] + EXPORT DMA0_Channel6_IRQHandler [WEAK] + EXPORT ADC0_1_IRQHandler [WEAK] + EXPORT CAN0_TX_IRQHandler [WEAK] + EXPORT CAN0_RX0_IRQHandler [WEAK] + EXPORT CAN0_RX1_IRQHandler [WEAK] + EXPORT CAN0_EWMC_IRQHandler [WEAK] + EXPORT EXTI5_9_IRQHandler [WEAK] + EXPORT TIMER0_BRK_IRQHandler [WEAK] + EXPORT TIMER0_UP_IRQHandler [WEAK] + EXPORT TIMER0_TRG_CMT_IRQHandler [WEAK] + EXPORT TIMER0_Channel_IRQHandler [WEAK] + EXPORT TIMER1_IRQHandler [WEAK] + EXPORT TIMER2_IRQHandler [WEAK] + EXPORT TIMER3_IRQHandler [WEAK] + EXPORT I2C0_EV_IRQHandler [WEAK] + EXPORT I2C0_ER_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI0_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART0_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI10_15_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USBFS_WKUP_IRQHandler [WEAK] + EXPORT TIMER7_BRK_IRQHandler [WEAK] + EXPORT TIMER7_UP_IRQHandler [WEAK] + EXPORT TIMER7_TRG_CMT_IRQHandler [WEAK] + EXPORT TIMER7_Channel_IRQHandler [WEAK] + EXPORT EXMC_IRQHandler [WEAK] + EXPORT TIMER4_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT TIMER5_IRQHandler [WEAK] + EXPORT TIMER6_IRQHandler [WEAK] + EXPORT DMA1_Channel0_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT ENET_IRQHandler [WEAK] + EXPORT ENET_WKUP_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_EWMC_IRQHandler [WEAK] + EXPORT USBFS_IRQHandler [WEAK] + + +;/* external interrupts handler */ +WWDGT_IRQHandler +LVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FMC_IRQHandler +RCU_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA0_Channel0_IRQHandler +DMA0_Channel1_IRQHandler +DMA0_Channel2_IRQHandler +DMA0_Channel3_IRQHandler +DMA0_Channel4_IRQHandler +DMA0_Channel5_IRQHandler +DMA0_Channel6_IRQHandler +ADC0_1_IRQHandler +CAN0_TX_IRQHandler +CAN0_RX0_IRQHandler +CAN0_RX1_IRQHandler +CAN0_EWMC_IRQHandler +EXTI5_9_IRQHandler +TIMER0_BRK_IRQHandler +TIMER0_UP_IRQHandler +TIMER0_TRG_CMT_IRQHandler +TIMER0_Channel_IRQHandler +TIMER1_IRQHandler +TIMER2_IRQHandler +TIMER3_IRQHandler +I2C0_EV_IRQHandler +I2C0_ER_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI0_IRQHandler +SPI1_IRQHandler +USART0_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI10_15_IRQHandler +RTC_Alarm_IRQHandler +USBFS_WKUP_IRQHandler +TIMER7_BRK_IRQHandler +TIMER7_UP_IRQHandler +TIMER7_TRG_CMT_IRQHandler +TIMER7_Channel_IRQHandler +EXMC_IRQHandler +TIMER4_IRQHandler +SPI2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +TIMER5_IRQHandler +TIMER6_IRQHandler +DMA1_Channel0_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +ENET_IRQHandler +ENET_WKUP_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_EWMC_IRQHandler +USBFS_IRQHandler + + + B . + ENDP + + ALIGN + +; user Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_hd.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_hd.s new file mode 100644 index 0000000000000000000000000000000000000000..fe768cc3a9d8f5a8f1252c2038959f3cb7f6e95c --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_hd.s @@ -0,0 +1,371 @@ +;/*! +; \file startup_gd32f10x_hd.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00002000 + + AREA STACK, NOINIT, READWRITE, ALIGN = 3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00002000 + + AREA HEAP, NOINIT, READWRITE, ALIGN = 3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + +; /* reset Vector Mapped to at Address 0 */ + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + +; /* external interrupts handler */ + DCD WWDGT_IRQHandler ; 16:Window Watchdog Timer + DCD LVD_IRQHandler ; 17:LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; 18:Tamper Interrupt + DCD RTC_IRQHandler ; 19:RTC through EXTI Line + DCD FMC_IRQHandler ; 20:FMC + DCD RCU_IRQHandler ; 21:RCU + DCD EXTI0_IRQHandler ; 22:EXTI Line 0 + DCD EXTI1_IRQHandler ; 23:EXTI Line 1 + DCD EXTI2_IRQHandler ; 24:EXTI Line 2 + DCD EXTI3_IRQHandler ; 25:EXTI Line 3 + DCD EXTI4_IRQHandler ; 26:EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; 27:DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; 28:DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; 29:DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; 30:DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; 31:DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; 32:DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; 33:DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; 34:ADC0 and ADC1 + DCD USBD_HP_CAN0_TX_IRQHandler ; 35:USBD and CAN0 TX + DCD USBD_LP_CAN0_RX0_IRQHandler ; 36:USBD and CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; 37:CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; 38:CAN0 EWMC + DCD EXTI5_9_IRQHandler ; 39:EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_IRQHandler ; 40:TIMER0 Break + DCD TIMER0_UP_IRQHandler ; 41:TIMER0 Update + DCD TIMER0_TRG_CMT_IRQHandler ; 42:TIMER0 Trigger and Commutation + DCD TIMER0_Channel_IRQHandler ; 43:TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; 44:TIMER1 + DCD TIMER2_IRQHandler ; 45:TIMER2 + DCD TIMER3_IRQHandler ; 46:TIMER3 + DCD I2C0_EV_IRQHandler ; 47:I2C0 Event + DCD I2C0_ER_IRQHandler ; 48:I2C0 Error + DCD I2C1_EV_IRQHandler ; 49:I2C1 Event + DCD I2C1_ER_IRQHandler ; 50:I2C1 Error + DCD SPI0_IRQHandler ; 51:SPI0 + DCD SPI1_IRQHandler ; 52:SPI1 + DCD USART0_IRQHandler ; 53:USART0 + DCD USART1_IRQHandler ; 54:USART1 + DCD USART2_IRQHandler ; 55:USART2 + DCD EXTI10_15_IRQHandler ; 56:EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; 57:RTC Alarm through EXTI Line + DCD USBD_WKUP_IRQHandler ; 58:USBD WakeUp from suspend through EXTI Line + DCD TIMER7_BRK_IRQHandler ; 59:TIMER7 Break Interrupt + DCD TIMER7_UP_IRQHandler ; 60:TIMER7 Update Interrupt + DCD TIMER7_TRG_CMT_IRQHandler ; 61:TIMER7 Trigger and Commutation Interrupt + DCD TIMER7_Channel_IRQHandler ; 62:TIMER7 Channel Capture Compare + DCD ADC2_IRQHandler ; 63:ADC2 + DCD EXMC_IRQHandler ; 64:EXMC + DCD SDIO_IRQHandler ; 65:SDIO + DCD TIMER4_IRQHandler ; 66:TIMER4 + DCD SPI2_IRQHandler ; 67:SPI2 + DCD UART3_IRQHandler ; 68:UART3 + DCD UART4_IRQHandler ; 69:UART4 + DCD TIMER5_IRQHandler ; 70:TIMER5 + DCD TIMER6_IRQHandler ; 71:TIMER6 + DCD DMA1_Channel0_IRQHandler ; 72:DMA1 Channel0 + DCD DMA1_Channel1_IRQHandler ; 73:DMA1 Channel1 + DCD DMA1_Channel2_IRQHandler ; 74:DMA1 Channel2 + DCD DMA1_Channel3_4_IRQHandler ; 75:DMA1 Channel3 and Channel4 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +;/* reset Handler */ +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +;/* dummy Exception Handlers */ +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP + +HardFault_Handler PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP + +MemManage_Handler PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP + +BusFault_Handler PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP + +UsageFault_Handler PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP + +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP + +DebugMon_Handler PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP + +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP + +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC +; /* external interrupts handler */ + EXPORT WWDGT_IRQHandler [WEAK] + EXPORT LVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT RCU_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA0_Channel0_IRQHandler [WEAK] + EXPORT DMA0_Channel1_IRQHandler [WEAK] + EXPORT DMA0_Channel2_IRQHandler [WEAK] + EXPORT DMA0_Channel3_IRQHandler [WEAK] + EXPORT DMA0_Channel4_IRQHandler [WEAK] + EXPORT DMA0_Channel5_IRQHandler [WEAK] + EXPORT DMA0_Channel6_IRQHandler [WEAK] + EXPORT ADC0_1_IRQHandler [WEAK] + EXPORT USBD_HP_CAN0_TX_IRQHandler [WEAK] + EXPORT USBD_LP_CAN0_RX0_IRQHandler [WEAK] + EXPORT CAN0_RX1_IRQHandler [WEAK] + EXPORT CAN0_EWMC_IRQHandler [WEAK] + EXPORT EXTI5_9_IRQHandler [WEAK] + EXPORT TIMER0_BRK_IRQHandler [WEAK] + EXPORT TIMER0_UP_IRQHandler [WEAK] + EXPORT TIMER0_TRG_CMT_IRQHandler [WEAK] + EXPORT TIMER0_Channel_IRQHandler [WEAK] + EXPORT TIMER1_IRQHandler [WEAK] + EXPORT TIMER2_IRQHandler [WEAK] + EXPORT TIMER3_IRQHandler [WEAK] + EXPORT I2C0_EV_IRQHandler [WEAK] + EXPORT I2C0_ER_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI0_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART0_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI10_15_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USBD_WKUP_IRQHandler [WEAK] + EXPORT TIMER7_BRK_IRQHandler [WEAK] + EXPORT TIMER7_UP_IRQHandler [WEAK] + EXPORT TIMER7_TRG_CMT_IRQHandler [WEAK] + EXPORT TIMER7_Channel_IRQHandler [WEAK] + EXPORT ADC2_IRQHandler [WEAK] + EXPORT EXMC_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIMER4_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT TIMER5_IRQHandler [WEAK] + EXPORT TIMER6_IRQHandler [WEAK] + EXPORT DMA1_Channel0_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_4_IRQHandler [WEAK] + + +;/* external interrupts handler */ +WWDGT_IRQHandler +LVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FMC_IRQHandler +RCU_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA0_Channel0_IRQHandler +DMA0_Channel1_IRQHandler +DMA0_Channel2_IRQHandler +DMA0_Channel3_IRQHandler +DMA0_Channel4_IRQHandler +DMA0_Channel5_IRQHandler +DMA0_Channel6_IRQHandler +ADC0_1_IRQHandler +USBD_HP_CAN0_TX_IRQHandler +USBD_LP_CAN0_RX0_IRQHandler +CAN0_RX1_IRQHandler +CAN0_EWMC_IRQHandler +EXTI5_9_IRQHandler +TIMER0_BRK_IRQHandler +TIMER0_UP_IRQHandler +TIMER0_TRG_CMT_IRQHandler +TIMER0_Channel_IRQHandler +TIMER1_IRQHandler +TIMER2_IRQHandler +TIMER3_IRQHandler +I2C0_EV_IRQHandler +I2C0_ER_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI0_IRQHandler +SPI1_IRQHandler +USART0_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI10_15_IRQHandler +RTC_Alarm_IRQHandler +USBD_WKUP_IRQHandler +TIMER7_BRK_IRQHandler +TIMER7_UP_IRQHandler +TIMER7_TRG_CMT_IRQHandler +TIMER7_Channel_IRQHandler +ADC2_IRQHandler +EXMC_IRQHandler +SDIO_IRQHandler +TIMER4_IRQHandler +SPI2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +TIMER5_IRQHandler +TIMER6_IRQHandler +DMA1_Channel0_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_4_IRQHandler + + + + B . + ENDP + + ALIGN + +; user Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_md.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_md.s new file mode 100644 index 0000000000000000000000000000000000000000..c567fee5c143d904cebfa1ec3b1a4af544002dc4 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_md.s @@ -0,0 +1,328 @@ +;/*! +; \file startup_gd32f10x_md.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00002000 + + AREA STACK, NOINIT, READWRITE, ALIGN = 3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00002000 + + AREA HEAP, NOINIT, READWRITE, ALIGN = 3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + +; /* reset Vector Mapped to at Address 0 */ + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + +; /* external interrupts handler */ + DCD WWDGT_IRQHandler ; 16:Window Watchdog Timer + DCD LVD_IRQHandler ; 17:LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; 18:Tamper Interrupt + DCD RTC_IRQHandler ; 19:RTC through EXTI Line + DCD FMC_IRQHandler ; 20:FMC + DCD RCU_IRQHandler ; 21:RCU + DCD EXTI0_IRQHandler ; 22:EXTI Line 0 + DCD EXTI1_IRQHandler ; 23:EXTI Line 1 + DCD EXTI2_IRQHandler ; 24:EXTI Line 2 + DCD EXTI3_IRQHandler ; 25:EXTI Line 3 + DCD EXTI4_IRQHandler ; 26:EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; 27:DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; 28:DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; 29:DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; 30:DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; 31:DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; 32:DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; 33:DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; 34:ADC0 and ADC1 + DCD USBD_HP_CAN0_TX_IRQHandler ; 35:USBD and CAN0 TX + DCD USBD_LP_CAN0_RX0_IRQHandler ; 36:USBD and CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; 37:CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; 38:CAN0 EWMC + DCD EXTI5_9_IRQHandler ; 39:EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_IRQHandler ; 40:TIMER0 Break + DCD TIMER0_UP_IRQHandler ; 41:TIMER0 Update + DCD TIMER0_TRG_CMT_IRQHandler ; 42:TIMER0 Trigger + DCD TIMER0_Channel_IRQHandler ; 43:TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; 44:TIMER1 + DCD TIMER2_IRQHandler ; 45:TIMER2 + DCD TIMER3_IRQHandler ; 46:TIMER3 + DCD I2C0_EV_IRQHandler ; 47:I2C0 Event + DCD I2C0_ER_IRQHandler ; 48:I2C0 Error + DCD I2C1_EV_IRQHandler ; 49:I2C1 Event + DCD I2C1_ER_IRQHandler ; 50:I2C1 Error + DCD SPI0_IRQHandler ; 51:SPI0 + DCD SPI1_IRQHandler ; 52:SPI1 + DCD USART0_IRQHandler ; 53:USART0 + DCD USART1_IRQHandler ; 54:USART1 + DCD USART2_IRQHandler ; 55:USART2 + DCD EXTI10_15_IRQHandler ; 56:EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; 57:RTC Alarm through EXTI Line + DCD USBD_WKUP_IRQHandler ; 58:USBD WakeUp from suspend through EXTI Line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXMC_IRQHandler ; 64:EXMC + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +;/* reset Handler */ +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +;/* dummy Exception Handlers */ +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP + +HardFault_Handler PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP + +MemManage_Handler PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP + +BusFault_Handler PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP + +UsageFault_Handler PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP + +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP + +DebugMon_Handler PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP + +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP + +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC +; /* external interrupts handler */ + EXPORT WWDGT_IRQHandler [WEAK] + EXPORT LVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT RCU_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA0_Channel0_IRQHandler [WEAK] + EXPORT DMA0_Channel1_IRQHandler [WEAK] + EXPORT DMA0_Channel2_IRQHandler [WEAK] + EXPORT DMA0_Channel3_IRQHandler [WEAK] + EXPORT DMA0_Channel4_IRQHandler [WEAK] + EXPORT DMA0_Channel5_IRQHandler [WEAK] + EXPORT DMA0_Channel6_IRQHandler [WEAK] + EXPORT ADC0_1_IRQHandler [WEAK] + EXPORT USBD_HP_CAN0_TX_IRQHandler [WEAK] + EXPORT USBD_LP_CAN0_RX0_IRQHandler [WEAK] + EXPORT CAN0_RX1_IRQHandler [WEAK] + EXPORT CAN0_EWMC_IRQHandler [WEAK] + EXPORT EXTI5_9_IRQHandler [WEAK] + EXPORT TIMER0_BRK_IRQHandler [WEAK] + EXPORT TIMER0_UP_IRQHandler [WEAK] + EXPORT TIMER0_TRG_CMT_IRQHandler [WEAK] + EXPORT TIMER0_Channel_IRQHandler [WEAK] + EXPORT TIMER1_IRQHandler [WEAK] + EXPORT TIMER2_IRQHandler [WEAK] + EXPORT TIMER3_IRQHandler [WEAK] + EXPORT I2C0_EV_IRQHandler [WEAK] + EXPORT I2C0_ER_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI0_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART0_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI10_15_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USBD_WKUP_IRQHandler [WEAK] + EXPORT EXMC_IRQHandler [WEAK] + + +;/* external interrupts handler */ +WWDGT_IRQHandler +LVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FMC_IRQHandler +RCU_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA0_Channel0_IRQHandler +DMA0_Channel1_IRQHandler +DMA0_Channel2_IRQHandler +DMA0_Channel3_IRQHandler +DMA0_Channel4_IRQHandler +DMA0_Channel5_IRQHandler +DMA0_Channel6_IRQHandler +ADC0_1_IRQHandler +USBD_HP_CAN0_TX_IRQHandler +USBD_LP_CAN0_RX0_IRQHandler +CAN0_RX1_IRQHandler +CAN0_EWMC_IRQHandler +EXTI5_9_IRQHandler +TIMER0_BRK_IRQHandler +TIMER0_UP_IRQHandler +TIMER0_TRG_CMT_IRQHandler +TIMER0_Channel_IRQHandler +TIMER1_IRQHandler +TIMER2_IRQHandler +TIMER3_IRQHandler +I2C0_EV_IRQHandler +I2C0_ER_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI0_IRQHandler +SPI1_IRQHandler +USART0_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI10_15_IRQHandler +RTC_Alarm_IRQHandler +USBD_WKUP_IRQHandler +EXMC_IRQHandler + + + + B . + ENDP + + ALIGN + +; user Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_xd.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_xd.s new file mode 100644 index 0000000000000000000000000000000000000000..3db249b8e5aff08b2a8c9e98480dec5bb634597c --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_xd.s @@ -0,0 +1,371 @@ +;/*! +; \file startup_gd32f10x_xd.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00002000 + + AREA STACK, NOINIT, READWRITE, ALIGN = 3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00002000 + + AREA HEAP, NOINIT, READWRITE, ALIGN = 3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + +; /* reset Vector Mapped to at Address 0 */ + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + +; /* external interrupts handler */ + DCD WWDGT_IRQHandler ; 16:Window Watchdog Timer + DCD LVD_IRQHandler ; 17:LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; 18:Tamper Interrupt + DCD RTC_IRQHandler ; 19:RTC through EXTI Line + DCD FMC_IRQHandler ; 20:FMC + DCD RCU_IRQHandler ; 21:RCU + DCD EXTI0_IRQHandler ; 22:EXTI Line 0 + DCD EXTI1_IRQHandler ; 23:EXTI Line 1 + DCD EXTI2_IRQHandler ; 24:EXTI Line 2 + DCD EXTI3_IRQHandler ; 25:EXTI Line 3 + DCD EXTI4_IRQHandler ; 26:EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; 27:DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; 28:DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; 29:DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; 30:DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; 31:DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; 32:DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; 33:DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; 34:ADC0 and ADC1 + DCD USBD_HP_CAN0_TX_IRQHandler ; 35:USBD and CAN0 TX + DCD USBD_LP_CAN0_RX0_IRQHandler ; 36:USBD and CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; 37:CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; 38:CAN0 EWMC + DCD EXTI5_9_IRQHandler ; 39:EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_TIMER8_IRQHandler ; 40:TIMER0 Break and TIMER8 global + DCD TIMER0_UP_TIMER9_IRQHandler ; 41:TIMER0 Update and TIMER9 global + DCD TIMER0_TRG_CMT_TIMER10_IRQHandler ; 42:TIMER0 Trigger and Commutation and TIMER10 global + DCD TIMER0_Channel_IRQHandler ; 43:TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; 44:TIMER1 + DCD TIMER2_IRQHandler ; 45:TIMER2 + DCD TIMER3_IRQHandler ; 46:TIMER3 + DCD I2C0_EV_IRQHandler ; 47:I2C0 Event + DCD I2C0_ER_IRQHandler ; 48:I2C0 Error + DCD I2C1_EV_IRQHandler ; 49:I2C1 Event + DCD I2C1_ER_IRQHandler ; 50:I2C1 Error + DCD SPI0_IRQHandler ; 51:SPI0 + DCD SPI1_IRQHandler ; 52:SPI1 + DCD USART0_IRQHandler ; 53:USART0 + DCD USART1_IRQHandler ; 54:USART1 + DCD USART2_IRQHandler ; 55:USART2 + DCD EXTI10_15_IRQHandler ; 56:EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; 57:RTC Alarm through EXTI Line + DCD USBD_WKUP_IRQHandler ; 58:USBD WakeUp from suspend through EXTI Line + DCD TIMER7_BRK_TIMER11_IRQHandler ; 59:TIMER7 Break Interrupt and TIMER11 global + DCD TIMER7_UP_TIMER12_IRQHandler ; 60:TIMER7 Update Interrupt and TIMER12 global + DCD TIMER7_TRG_CMT_TIMER13_IRQHandler ; 61:TIMER7 Trigger and Commutation Interrupt and TIMER13 global + DCD TIMER7_Channel_IRQHandler ; 62:TIMER7 Channel Capture Compare + DCD ADC2_IRQHandler ; 63:ADC2 + DCD EXMC_IRQHandler ; 64:EXMC + DCD SDIO_IRQHandler ; 65:SDIO + DCD TIMER4_IRQHandler ; 66:TIMER4 + DCD SPI2_IRQHandler ; 67:SPI2 + DCD UART3_IRQHandler ; 68:UART3 + DCD UART4_IRQHandler ; 69:UART4 + DCD TIMER5_IRQHandler ; 70:TIMER5 + DCD TIMER6_IRQHandler ; 71:TIMER6 + DCD DMA1_Channel0_IRQHandler ; 72:DMA1 Channel0 + DCD DMA1_Channel1_IRQHandler ; 73:DMA1 Channel1 + DCD DMA1_Channel2_IRQHandler ; 74:DMA1 Channel2 + DCD DMA1_Channel3_4_IRQHandler ; 75:DMA1 Channel3 and Channel4 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +;/* reset Handler */ +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +;/* dummy Exception Handlers */ +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP + +HardFault_Handler PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP + +MemManage_Handler PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP + +BusFault_Handler PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP + +UsageFault_Handler PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP + +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP + +DebugMon_Handler PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP + +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP + +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC +; /* external interrupts handler */ + EXPORT WWDGT_IRQHandler [WEAK] + EXPORT LVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT RCU_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA0_Channel0_IRQHandler [WEAK] + EXPORT DMA0_Channel1_IRQHandler [WEAK] + EXPORT DMA0_Channel2_IRQHandler [WEAK] + EXPORT DMA0_Channel3_IRQHandler [WEAK] + EXPORT DMA0_Channel4_IRQHandler [WEAK] + EXPORT DMA0_Channel5_IRQHandler [WEAK] + EXPORT DMA0_Channel6_IRQHandler [WEAK] + EXPORT ADC0_1_IRQHandler [WEAK] + EXPORT USBD_HP_CAN0_TX_IRQHandler [WEAK] + EXPORT USBD_LP_CAN0_RX0_IRQHandler [WEAK] + EXPORT CAN0_RX1_IRQHandler [WEAK] + EXPORT CAN0_EWMC_IRQHandler [WEAK] + EXPORT EXTI5_9_IRQHandler [WEAK] + EXPORT TIMER0_BRK_TIMER8_IRQHandler [WEAK] + EXPORT TIMER0_UP_TIMER9_IRQHandler [WEAK] + EXPORT TIMER0_TRG_CMT_TIMER10_IRQHandler [WEAK] + EXPORT TIMER0_Channel_IRQHandler [WEAK] + EXPORT TIMER1_IRQHandler [WEAK] + EXPORT TIMER2_IRQHandler [WEAK] + EXPORT TIMER3_IRQHandler [WEAK] + EXPORT I2C0_EV_IRQHandler [WEAK] + EXPORT I2C0_ER_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI0_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART0_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI10_15_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USBD_WKUP_IRQHandler [WEAK] + EXPORT TIMER7_BRK_TIMER11_IRQHandler [WEAK] + EXPORT TIMER7_UP_TIMER12_IRQHandler [WEAK] + EXPORT TIMER7_TRG_CMT_TIMER13_IRQHandler [WEAK] + EXPORT TIMER7_Channel_IRQHandler [WEAK] + EXPORT ADC2_IRQHandler [WEAK] + EXPORT EXMC_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIMER4_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT TIMER5_IRQHandler [WEAK] + EXPORT TIMER6_IRQHandler [WEAK] + EXPORT DMA1_Channel0_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_4_IRQHandler [WEAK] + + +;/* external interrupts handler */ +WWDGT_IRQHandler +LVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FMC_IRQHandler +RCU_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA0_Channel0_IRQHandler +DMA0_Channel1_IRQHandler +DMA0_Channel2_IRQHandler +DMA0_Channel3_IRQHandler +DMA0_Channel4_IRQHandler +DMA0_Channel5_IRQHandler +DMA0_Channel6_IRQHandler +ADC0_1_IRQHandler +USBD_HP_CAN0_TX_IRQHandler +USBD_LP_CAN0_RX0_IRQHandler +CAN0_RX1_IRQHandler +CAN0_EWMC_IRQHandler +EXTI5_9_IRQHandler +TIMER0_BRK_TIMER8_IRQHandler +TIMER0_UP_TIMER9_IRQHandler +TIMER0_TRG_CMT_TIMER10_IRQHandler +TIMER0_Channel_IRQHandler +TIMER1_IRQHandler +TIMER2_IRQHandler +TIMER3_IRQHandler +I2C0_EV_IRQHandler +I2C0_ER_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI0_IRQHandler +SPI1_IRQHandler +USART0_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI10_15_IRQHandler +RTC_Alarm_IRQHandler +USBD_WKUP_IRQHandler +TIMER7_BRK_TIMER11_IRQHandler +TIMER7_UP_TIMER12_IRQHandler +TIMER7_TRG_CMT_TIMER13_IRQHandler +TIMER7_Channel_IRQHandler +ADC2_IRQHandler +EXMC_IRQHandler +SDIO_IRQHandler +TIMER4_IRQHandler +SPI2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +TIMER5_IRQHandler +TIMER6_IRQHandler +DMA1_Channel0_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_4_IRQHandler + + + + B . + ENDP + + ALIGN + +; user Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_cl.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_cl.s new file mode 100644 index 0000000000000000000000000000000000000000..8d614ecf3e4b8916e0820b25293cd7d0e62dd254 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_cl.s @@ -0,0 +1,529 @@ +;/*! +; \file startup_gd32f10x_cl.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) ; top of stack + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDGT_IRQHandler ; Vector Number 16,Window Watchdog Timer + DCD LVD_IRQHandler ; Vector Number 17,LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Vector Number 18,Tamper Interrupt + DCD RTC_IRQHandler ; Vector Number 19,RTC through EXTI Line + DCD FMC_IRQHandler ; Vector Number 20,FMC + DCD RCU_IRQHandler ; Vector Number 21,RCU + DCD EXTI0_IRQHandler ; Vector Number 22,EXTI Line 0 + DCD EXTI1_IRQHandler ; Vector Number 23,EXTI Line 1 + DCD EXTI2_IRQHandler ; Vector Number 24,EXTI Line 2 + DCD EXTI3_IRQHandler ; Vector Number 25,EXTI Line 3 + DCD EXTI4_IRQHandler ; Vector Number 26,EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; Vector Number 27,DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; Vector Number 28,DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; Vector Number 29,DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; Vector Number 30,DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; Vector Number 31,DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; Vector Number 32,DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; Vector Number 33,DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; Vector Number 34,ADC0 and ADC1 + DCD CAN0_TX_IRQHandler ; Vector Number 35,CAN0 TX + DCD CAN0_RX0_IRQHandler ; Vector Number 36,CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; Vector Number 37,CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; Vector Number 38,CAN0 EWMC + DCD EXTI5_9_IRQHandler ; Vector Number 39,EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_IRQHandler ; Vector Number 40,TIMER0 Break + DCD TIMER0_UP_IRQHandler ; Vector Number 41,TIMER0 Update + DCD TIMER0_TRG_CMT_IRQHandler ; Vector Number 42,TIMER0 Trigger and Commutation + DCD TIMER0_Channel_IRQHandler ; Vector Number 43,TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; Vector Number 44,TIMER1 + DCD TIMER2_IRQHandler ; Vector Number 45,TIMER2 + DCD TIMER3_IRQHandler ; Vector Number 46,TIMER3 + DCD I2C0_EV_IRQHandler ; Vector Number 47,I2C0 Event + DCD I2C0_ER_IRQHandler ; Vector Number 48,I2C0 Error + DCD I2C1_EV_IRQHandler ; Vector Number 49,I2C1 Event + DCD I2C1_ER_IRQHandler ; Vector Number 50,I2C1 Error + DCD SPI0_IRQHandler ; Vector Number 51,SPI0 + DCD SPI1_IRQHandler ; Vector Number 52,SPI1 + DCD USART0_IRQHandler ; Vector Number 53,USART0 + DCD USART1_IRQHandler ; Vector Number 54,USART1 + DCD USART2_IRQHandler ; Vector Number 55,USART2 + DCD EXTI10_15_IRQHandler ; Vector Number 56,EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; Vector Number 57,RTC Alarm through EXTI Line + DCD USBFS_WKUP_IRQHandler ; Vector Number 58,USBFS WakeUp from suspend through EXTI Line + DCD TIMER7_BRK_IRQHandler ; Vector Number 59,TIMER7 Break Interrupt + DCD TIMER7_UP_IRQHandler ; Vector Number 60,TIMER7 Update Interrupt + DCD TIMER7_TRG_CMT_IRQHandler ; Vector Number 61,TIMER7 Trigger and Commutation Interrupt + DCD TIMER7_Channel_IRQHandler ; Vector Number 62,TIMER7 Channel Capture Compare + DCD 0 ; Reserved + DCD EXMC_IRQHandler ; Vector Number 64,EXMC + DCD 0 ; Reserved + DCD TIMER4_IRQHandler ; Vector Number 66,TIMER4 + DCD SPI2_IRQHandler ; Vector Number 67,SPI2 + DCD UART3_IRQHandler ; Vector Number 68,UART3 + DCD UART4_IRQHandler ; Vector Number 69,UART4 + DCD TIMER5_IRQHandler ; Vector Number 70,TIMER5 + DCD TIMER6_IRQHandler ; Vector Number 71,TIMER6 + DCD DMA1_Channel0_IRQHandler ; Vector Number 72,DMA1 Channel0 + DCD DMA1_Channel1_IRQHandler ; Vector Number 73,DMA1 Channel1 + DCD DMA1_Channel2_IRQHandler ; Vector Number 74,DMA1 Channel2 + DCD DMA1_Channel3_IRQHandler ; Vector Number 75,DMA1 Channel3 + DCD DMA1_Channel4_IRQHandler ; Vector Number 76,DMA1 Channel4 + DCD ENET_IRQHandler ; Vector Number 77,Ethernet + DCD ENET_WKUP_IRQHandler ; Vector Number 78,Ethernet Wakeup through EXTI line + DCD CAN1_TX_IRQHandler ; Vector Number 79,CAN1 TX + DCD CAN1_RX0_IRQHandler ; Vector Number 80,CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; Vector Number 81,CAN1 RX1 + DCD CAN1_EWMC_IRQHandler ; Vector Number 82,CAN1 EWMC + DCD USBFS_IRQHandler ; Vector Number 83,USBFS +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, = SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDGT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDGT_IRQHandler + B WWDGT_IRQHandler + + PUBWEAK LVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LVD_IRQHandler + B LVD_IRQHandler + + PUBWEAK TAMPER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMPER_IRQHandler + B TAMPER_IRQHandler + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK RCU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCU_IRQHandler + B RCU_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA0_Channel0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel0_IRQHandler + B DMA0_Channel0_IRQHandler + + PUBWEAK DMA0_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel1_IRQHandler + B DMA0_Channel1_IRQHandler + + PUBWEAK DMA0_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel2_IRQHandler + B DMA0_Channel2_IRQHandler + + PUBWEAK DMA0_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel3_IRQHandler + B DMA0_Channel3_IRQHandler + + PUBWEAK DMA0_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel4_IRQHandler + B DMA0_Channel4_IRQHandler + + PUBWEAK DMA0_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel5_IRQHandler + B DMA0_Channel5_IRQHandler + + PUBWEAK DMA0_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel6_IRQHandler + B DMA0_Channel6_IRQHandler + + PUBWEAK ADC0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC0_1_IRQHandler + B ADC0_1_IRQHandler + + PUBWEAK CAN0_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_TX_IRQHandler + B CAN0_TX_IRQHandler + + PUBWEAK CAN0_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_RX0_IRQHandler + B CAN0_RX0_IRQHandler + + PUBWEAK CAN0_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_RX1_IRQHandler + B CAN0_RX1_IRQHandler + + PUBWEAK CAN0_EWMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_EWMC_IRQHandler + B CAN0_EWMC_IRQHandler + + PUBWEAK EXTI5_9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI5_9_IRQHandler + B EXTI5_9_IRQHandler + + PUBWEAK TIMER0_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_BRK_IRQHandler + B TIMER0_BRK_IRQHandler + + PUBWEAK TIMER0_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_UP_IRQHandler + B TIMER0_UP_IRQHandler + + PUBWEAK TIMER0_TRG_CMT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_TRG_CMT_IRQHandler + B TIMER0_TRG_CMT_IRQHandler + + PUBWEAK TIMER0_Channel_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_Channel_IRQHandler + B TIMER0_Channel_IRQHandler + + PUBWEAK TIMER1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER1_IRQHandler + B TIMER1_IRQHandler + + PUBWEAK TIMER2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER2_IRQHandler + B TIMER2_IRQHandler + + PUBWEAK TIMER3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER3_IRQHandler + B TIMER3_IRQHandler + + PUBWEAK I2C0_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_EV_IRQHandler + B I2C0_EV_IRQHandler + + PUBWEAK I2C0_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_ER_IRQHandler + B I2C0_ER_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI0_IRQHandler + B SPI0_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART0_IRQHandler + B USART0_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK EXTI10_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI10_15_IRQHandler + B EXTI10_15_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK USBFS_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBFS_WKUP_IRQHandler + B USBFS_WKUP_IRQHandler + + PUBWEAK TIMER7_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_BRK_IRQHandler + B TIMER7_BRK_IRQHandler + + PUBWEAK TIMER7_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_UP_IRQHandler + B TIMER7_UP_IRQHandler + + PUBWEAK TIMER7_TRG_CMT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_TRG_CMT_IRQHandler + B TIMER7_TRG_CMT_IRQHandler + + PUBWEAK TIMER7_Channel_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_Channel_IRQHandler + B TIMER7_Channel_IRQHandler + + PUBWEAK EXMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXMC_IRQHandler + B EXMC_IRQHandler + + PUBWEAK TIMER4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER4_IRQHandler + B TIMER4_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK UART3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART3_IRQHandler + B UART3_IRQHandler + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART4_IRQHandler + B UART4_IRQHandler + + PUBWEAK TIMER5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER5_IRQHandler + B TIMER5_IRQHandler + + PUBWEAK TIMER6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER6_IRQHandler + B TIMER6_IRQHandler + + PUBWEAK DMA1_Channel0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel0_IRQHandler + B DMA1_Channel0_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK ENET_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ENET_IRQHandler + B ENET_IRQHandler + + PUBWEAK ENET_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ENET_WKUP_IRQHandler + B ENET_WKUP_IRQHandler + + PUBWEAK CAN1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_TX_IRQHandler + B CAN1_TX_IRQHandler + + PUBWEAK CAN1_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX0_IRQHandler + B CAN1_RX0_IRQHandler + + PUBWEAK CAN1_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX1_IRQHandler + B CAN1_RX1_IRQHandler + + PUBWEAK CAN1_EWMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_EWMC_IRQHandler + B CAN1_EWMC_IRQHandler + + PUBWEAK USBFS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBFS_IRQHandler + B USBFS_IRQHandler + + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_hd.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_hd.s new file mode 100644 index 0000000000000000000000000000000000000000..0cd9ade897defd78ae2236737075c96c81bb3594 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_hd.s @@ -0,0 +1,491 @@ +;/*! +; \file startup_gd32f10x_hd.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) ; top of stack + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDGT_IRQHandler ; Vector Number 16,Window Watchdog Timer + DCD LVD_IRQHandler ; Vector Number 17,LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Vector Number 18,Tamper Interrupt + DCD RTC_IRQHandler ; Vector Number 19,RTC through EXTI Line + DCD FMC_IRQHandler ; Vector Number 20,FMC + DCD RCU_IRQHandler ; Vector Number 21,RCU + DCD EXTI0_IRQHandler ; Vector Number 22,EXTI Line 0 + DCD EXTI1_IRQHandler ; Vector Number 23,EXTI Line 1 + DCD EXTI2_IRQHandler ; Vector Number 24,EXTI Line 2 + DCD EXTI3_IRQHandler ; Vector Number 25,EXTI Line 3 + DCD EXTI4_IRQHandler ; Vector Number 26,EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; Vector Number 27,DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; Vector Number 28,DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; Vector Number 29,DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; Vector Number 30,DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; Vector Number 31,DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; Vector Number 32,DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; Vector Number 33,DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; Vector Number 34,ADC0 and ADC1 + DCD USBD_HP_CAN0_TX_IRQHandler ; Vector Number 35,USBD and CAN0 TX + DCD USBD_LP_CAN0_RX0_IRQHandler ; Vector Number 36,USBD and CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; Vector Number 37,CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; Vector Number 38,CAN0 EWMC + DCD EXTI5_9_IRQHandler ; Vector Number 39,EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_IRQHandler ; Vector Number 40,TIMER0 Break + DCD TIMER0_UP_IRQHandler ; Vector Number 41,TIMER0 Update + DCD TIMER0_TRG_CMT_IRQHandler ; Vector Number 42,TIMER0 Trigger and Commutation + DCD TIMER0_Channel_IRQHandler ; Vector Number 43,TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; Vector Number 44,TIMER1 + DCD TIMER2_IRQHandler ; Vector Number 45,TIMER2 + DCD TIMER3_IRQHandler ; Vector Number 46,TIMER3 + DCD I2C0_EV_IRQHandler ; Vector Number 47,I2C0 Event + DCD I2C0_ER_IRQHandler ; Vector Number 48,I2C0 Error + DCD I2C1_EV_IRQHandler ; Vector Number 49,I2C1 Event + DCD I2C1_ER_IRQHandler ; Vector Number 50,I2C1 Error + DCD SPI0_IRQHandler ; Vector Number 51,SPI0 + DCD SPI1_IRQHandler ; Vector Number 52,SPI1 + DCD USART0_IRQHandler ; Vector Number 53,USART0 + DCD USART1_IRQHandler ; Vector Number 54,USART1 + DCD USART2_IRQHandler ; Vector Number 55,USART2 + DCD EXTI10_15_IRQHandler ; Vector Number 56,EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; Vector Number 57,RTC Alarm through EXTI Line + DCD USBD_WKUP_IRQHandler ; Vector Number 58,USBD WakeUp from suspend through EXTI Line + DCD TIMER7_BRK_IRQHandler ; Vector Number 59,TIMER7 Break Interrupt + DCD TIMER7_UP_IRQHandler ; Vector Number 60,TIMER7 Update Interrupt + DCD TIMER7_TRG_CMT_IRQHandler ; Vector Number 61,TIMER7 Trigger and Commutation Interrupt + DCD TIMER7_Channel_IRQHandler ; Vector Number 62,TIMER7 Channel Capture Compare + DCD ADC2_IRQHandler ; Vector Number 63,ADC2 + DCD EXMC_IRQHandler ; Vector Number 64,EXMC + DCD SDIO_IRQHandler ; Vector Number 65,SDIO + DCD TIMER4_IRQHandler ; Vector Number 66,TIMER4 + DCD SPI2_IRQHandler ; Vector Number 67,SPI2 + DCD UART3_IRQHandler ; Vector Number 68,UART3 + DCD UART4_IRQHandler ; Vector Number 69,UART4 + DCD TIMER5_IRQHandler ; Vector Number 70,TIMER5 + DCD TIMER6_IRQHandler ; Vector Number 71,TIMER6 + DCD DMA1_Channel0_IRQHandler ; Vector Number 72,DMA1 Channel0 + DCD DMA1_Channel1_IRQHandler ; Vector Number 73,DMA1 Channel1 + DCD DMA1_Channel2_IRQHandler ; Vector Number 74,DMA1 Channel2 + DCD DMA1_Channel3_4_IRQHandler ; Vector Number 75,DMA1 Channel4 +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, = SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDGT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDGT_IRQHandler + B WWDGT_IRQHandler + + PUBWEAK LVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LVD_IRQHandler + B LVD_IRQHandler + + PUBWEAK TAMPER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMPER_IRQHandler + B TAMPER_IRQHandler + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK RCU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCU_IRQHandler + B RCU_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA0_Channel0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel0_IRQHandler + B DMA0_Channel0_IRQHandler + + + PUBWEAK DMA0_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel1_IRQHandler + B DMA0_Channel1_IRQHandler + + PUBWEAK DMA0_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel2_IRQHandler + B DMA0_Channel2_IRQHandler + + PUBWEAK DMA0_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel3_IRQHandler + B DMA0_Channel3_IRQHandler + + PUBWEAK DMA0_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel4_IRQHandler + B DMA0_Channel4_IRQHandler + + PUBWEAK DMA0_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel5_IRQHandler + B DMA0_Channel5_IRQHandler + + PUBWEAK DMA0_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel6_IRQHandler + B DMA0_Channel6_IRQHandler + + PUBWEAK ADC0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC0_1_IRQHandler + B ADC0_1_IRQHandler + + PUBWEAK USBD_HP_CAN0_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_HP_CAN0_TX_IRQHandler + B USBD_HP_CAN0_TX_IRQHandler + + PUBWEAK USBD_LP_CAN0_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_LP_CAN0_RX0_IRQHandler + B USBD_LP_CAN0_RX0_IRQHandler + + PUBWEAK CAN0_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_RX1_IRQHandler + B CAN0_RX1_IRQHandler + + PUBWEAK CAN0_EWMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_EWMC_IRQHandler + B CAN0_EWMC_IRQHandler + + PUBWEAK EXTI5_9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI5_9_IRQHandler + B EXTI5_9_IRQHandler + + PUBWEAK TIMER0_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_BRK_IRQHandler + B TIMER0_BRK_IRQHandler + + PUBWEAK TIMER0_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_UP_IRQHandler + B TIMER0_UP_IRQHandler + + PUBWEAK TIMER0_TRG_CMT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_TRG_CMT_IRQHandler + B TIMER0_TRG_CMT_IRQHandler + + PUBWEAK TIMER0_Channel_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_Channel_IRQHandler + B TIMER0_Channel_IRQHandler + + PUBWEAK TIMER1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER1_IRQHandler + B TIMER1_IRQHandler + + PUBWEAK TIMER2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER2_IRQHandler + B TIMER2_IRQHandler + + PUBWEAK TIMER3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER3_IRQHandler + B TIMER3_IRQHandler + + PUBWEAK I2C0_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_EV_IRQHandler + B I2C0_EV_IRQHandler + + PUBWEAK I2C0_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_ER_IRQHandler + B I2C0_ER_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI0_IRQHandler + B SPI0_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART0_IRQHandler + B USART0_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK EXTI10_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI10_15_IRQHandler + B EXTI10_15_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK USBD_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_WKUP_IRQHandler + B USBD_WKUP_IRQHandler + + PUBWEAK TIMER7_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_BRK_IRQHandler + B TIMER7_BRK_IRQHandler + + PUBWEAK TIMER7_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_UP_IRQHandler + B TIMER7_UP_IRQHandler + + PUBWEAK TIMER7_TRG_CMT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_TRG_CMT_IRQHandler + B TIMER7_TRG_CMT_IRQHandler + + PUBWEAK TIMER7_Channel_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_Channel_IRQHandler + B TIMER7_Channel_IRQHandler + + PUBWEAK ADC2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC2_IRQHandler + B ADC2_IRQHandler + + PUBWEAK EXMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXMC_IRQHandler + B EXMC_IRQHandler + + PUBWEAK SDIO_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDIO_IRQHandler + B SDIO_IRQHandler + + PUBWEAK TIMER4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER4_IRQHandler + B TIMER4_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK UART3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART3_IRQHandler + B UART3_IRQHandler + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART4_IRQHandler + B UART4_IRQHandler + + PUBWEAK TIMER5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER5_IRQHandler + B TIMER5_IRQHandler + + PUBWEAK TIMER6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER6_IRQHandler + B TIMER6_IRQHandler + + PUBWEAK DMA1_Channel0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel0_IRQHandler + B DMA1_Channel0_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_4_IRQHandler + B DMA1_Channel3_4_IRQHandler + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_md.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_md.s new file mode 100644 index 0000000000000000000000000000000000000000..bc0d38661368af156cf96a3e316486f76d473921 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_md.s @@ -0,0 +1,400 @@ +;/*! +; \file startup_gd32f10x_md.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) ; top of stack + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDGT_IRQHandler ; Vector Number 16,Window Watchdog Timer + DCD LVD_IRQHandler ; Vector Number 17,LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Vector Number 18,Tamper Interrupt + DCD RTC_IRQHandler ; Vector Number 19,RTC through EXTI Line + DCD FMC_IRQHandler ; Vector Number 20,FMC + DCD RCU_IRQHandler ; Vector Number 21,RCU + DCD EXTI0_IRQHandler ; Vector Number 22,EXTI Line 0 + DCD EXTI1_IRQHandler ; Vector Number 23,EXTI Line 1 + DCD EXTI2_IRQHandler ; Vector Number 24,EXTI Line 2 + DCD EXTI3_IRQHandler ; Vector Number 25,EXTI Line 3 + DCD EXTI4_IRQHandler ; Vector Number 26,EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; Vector Number 27,DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; Vector Number 28,DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; Vector Number 29,DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; Vector Number 30,DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; Vector Number 31,DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; Vector Number 32,DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; Vector Number 33,DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; Vector Number 34,ADC0 and ADC1 + DCD USBD_HP_CAN0_TX_IRQHandler ; Vector Number 35,USBD and CAN0 TX + DCD USBD_LP_CAN0_RX0_IRQHandler ; Vector Number 36,USBD and CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; Vector Number 37,CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; Vector Number 38,CAN0 EWMC + DCD EXTI5_9_IRQHandler ; Vector Number 39,EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_IRQHandler ; Vector Number 40,TIMER0 Break + DCD TIMER0_UP_IRQHandler ; Vector Number 41,TIMER0 Update + DCD TIMER0_TRG_CMT_IRQHandler ; Vector Number 42,TIMER0 Trigger and Commutation + DCD TIMER0_Channel_IRQHandler ; Vector Number 43,TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; Vector Number 44,TIMER1 + DCD TIMER2_IRQHandler ; Vector Number 45,TIMER2 + DCD TIMER3_IRQHandler ; Vector Number 46,TIMER3 + DCD I2C0_EV_IRQHandler ; Vector Number 47,I2C0 Event + DCD I2C0_ER_IRQHandler ; Vector Number 48,I2C0 Error + DCD I2C1_EV_IRQHandler ; Vector Number 49,I2C1 Event + DCD I2C1_ER_IRQHandler ; Vector Number 50,I2C1 Error + DCD SPI0_IRQHandler ; Vector Number 51,SPI0 + DCD SPI1_IRQHandler ; Vector Number 52,SPI1 + DCD USART0_IRQHandler ; Vector Number 53,USART0 + DCD USART1_IRQHandler ; Vector Number 54,USART1 + DCD USART2_IRQHandler ; Vector Number 55,USART2 + DCD EXTI10_15_IRQHandler ; Vector Number 56,EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; Vector Number 57,RTC Alarm through EXTI Line + DCD USBD_WKUP_IRQHandler ; Vector Number 58,USBD WakeUp from suspend through EXTI Line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXMC_IRQHandler ; Vector Number 64,EXMC +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, = SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDGT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDGT_IRQHandler + B WWDGT_IRQHandler + + PUBWEAK LVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LVD_IRQHandler + B LVD_IRQHandler + + PUBWEAK TAMPER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMPER_IRQHandler + B TAMPER_IRQHandler + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK RCU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCU_IRQHandler + B RCU_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA0_Channel0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel0_IRQHandler + B DMA0_Channel0_IRQHandler + + + PUBWEAK DMA0_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel1_IRQHandler + B DMA0_Channel1_IRQHandler + + PUBWEAK DMA0_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel2_IRQHandler + B DMA0_Channel2_IRQHandler + + PUBWEAK DMA0_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel3_IRQHandler + B DMA0_Channel3_IRQHandler + + PUBWEAK DMA0_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel4_IRQHandler + B DMA0_Channel4_IRQHandler + + PUBWEAK DMA0_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel5_IRQHandler + B DMA0_Channel5_IRQHandler + + PUBWEAK DMA0_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel6_IRQHandler + B DMA0_Channel6_IRQHandler + + PUBWEAK ADC0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC0_1_IRQHandler + B ADC0_1_IRQHandler + + PUBWEAK USBD_HP_CAN0_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_HP_CAN0_TX_IRQHandler + B USBD_HP_CAN0_TX_IRQHandler + + PUBWEAK USBD_LP_CAN0_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_LP_CAN0_RX0_IRQHandler + B USBD_LP_CAN0_RX0_IRQHandler + + PUBWEAK CAN0_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_RX1_IRQHandler + B CAN0_RX1_IRQHandler + + PUBWEAK CAN0_EWMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_EWMC_IRQHandler + B CAN0_EWMC_IRQHandler + + PUBWEAK EXTI5_9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI5_9_IRQHandler + B EXTI5_9_IRQHandler + + PUBWEAK TIMER0_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_BRK_IRQHandler + B TIMER0_BRK_IRQHandler + + PUBWEAK TIMER0_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_UP_IRQHandler + B TIMER0_UP_IRQHandler + + PUBWEAK TIMER0_TRG_CMT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_TRG_CMT_IRQHandler + B TIMER0_TRG_CMT_IRQHandler + + PUBWEAK TIMER0_Channel_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_Channel_IRQHandler + B TIMER0_Channel_IRQHandler + + PUBWEAK TIMER1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER1_IRQHandler + B TIMER1_IRQHandler + + PUBWEAK TIMER2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER2_IRQHandler + B TIMER2_IRQHandler + + PUBWEAK TIMER3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER3_IRQHandler + B TIMER3_IRQHandler + + PUBWEAK I2C0_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_EV_IRQHandler + B I2C0_EV_IRQHandler + + PUBWEAK I2C0_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_ER_IRQHandler + B I2C0_ER_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI0_IRQHandler + B SPI0_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART0_IRQHandler + B USART0_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK EXTI10_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI10_15_IRQHandler + B EXTI10_15_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK USBD_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_WKUP_IRQHandler + B USBD_WKUP_IRQHandler + + PUBWEAK EXMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXMC_IRQHandler + B EXMC_IRQHandler + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_xd.s b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_xd.s new file mode 100644 index 0000000000000000000000000000000000000000..4f52b7d5fabb779709455488a3a777bcfa2184bf --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_xd.s @@ -0,0 +1,491 @@ +;/*! +; \file startup_gd32f10x_xd.s +; \brief start up file +; +; \version 2014-12-26, V1.0.0, firmware for GD32F10x +; \version 2017-06-20, V2.0.0, firmware for GD32F10x +; \version 2018-07-31, V2.1.0, firmware for GD32F10x +;*/ +; +;/* +; Copyright (c) 2018, GigaDevice Semiconductor Inc. +; +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without modification, +;are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, this +; list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of the copyright holder nor the names of its contributors +; may be used to endorse or promote products derived from this software without +; specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +;OF SUCH DAMAGE. +;*/ + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) ; top of stack + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDGT_IRQHandler ; Vector Number 16,Window Watchdog Timer + DCD LVD_IRQHandler ; Vector Number 17,LVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Vector Number 18,Tamper Interrupt + DCD RTC_IRQHandler ; Vector Number 19,RTC through EXTI Line + DCD FMC_IRQHandler ; Vector Number 20,FMC + DCD RCU_IRQHandler ; Vector Number 21,RCU + DCD EXTI0_IRQHandler ; Vector Number 22,EXTI Line 0 + DCD EXTI1_IRQHandler ; Vector Number 23,EXTI Line 1 + DCD EXTI2_IRQHandler ; Vector Number 24,EXTI Line 2 + DCD EXTI3_IRQHandler ; Vector Number 25,EXTI Line 3 + DCD EXTI4_IRQHandler ; Vector Number 26,EXTI Line 4 + DCD DMA0_Channel0_IRQHandler ; Vector Number 27,DMA0 Channel 0 + DCD DMA0_Channel1_IRQHandler ; Vector Number 28,DMA0 Channel 1 + DCD DMA0_Channel2_IRQHandler ; Vector Number 29,DMA0 Channel 2 + DCD DMA0_Channel3_IRQHandler ; Vector Number 30,DMA0 Channel 3 + DCD DMA0_Channel4_IRQHandler ; Vector Number 31,DMA0 Channel 4 + DCD DMA0_Channel5_IRQHandler ; Vector Number 32,DMA0 Channel 5 + DCD DMA0_Channel6_IRQHandler ; Vector Number 33,DMA0 Channel 6 + DCD ADC0_1_IRQHandler ; Vector Number 34,ADC0 and ADC1 + DCD USBD_HP_CAN0_TX_IRQHandler ; Vector Number 35,USBD and CAN0 TX + DCD USBD_LP_CAN0_RX0_IRQHandler ; Vector Number 36,USBD and CAN0 RX0 + DCD CAN0_RX1_IRQHandler ; Vector Number 37,CAN0 RX1 + DCD CAN0_EWMC_IRQHandler ; Vector Number 38,CAN0 EWMC + DCD EXTI5_9_IRQHandler ; Vector Number 39,EXTI Line 5 to EXTI Line 9 + DCD TIMER0_BRK_TIMER8_IRQHandler ; Vector Number 40,TIMER0 Break and TIMER8 global + DCD TIMER0_UP_TIMER9_IRQHandler ; Vector Number 41,TIMER0 Update and TIMER9 global + DCD TIMER0_TRG_CMT_TIMER10_IRQHandler ; Vector Number 42,TIMER0 Trigger and Commutation and TIMER10 global + DCD TIMER0_Channel_IRQHandler ; Vector Number 43,TIMER0 Channel Capture Compare + DCD TIMER1_IRQHandler ; Vector Number 44,TIMER1 + DCD TIMER2_IRQHandler ; Vector Number 45,TIMER2 + DCD TIMER3_IRQHandler ; Vector Number 46,TIMER3 + DCD I2C0_EV_IRQHandler ; Vector Number 47,I2C0 Event + DCD I2C0_ER_IRQHandler ; Vector Number 48,I2C0 Error + DCD I2C1_EV_IRQHandler ; Vector Number 49,I2C1 Event + DCD I2C1_ER_IRQHandler ; Vector Number 50,I2C1 Error + DCD SPI0_IRQHandler ; Vector Number 51,SPI0 + DCD SPI1_IRQHandler ; Vector Number 52,SPI1 + DCD USART0_IRQHandler ; Vector Number 53,USART0 + DCD USART1_IRQHandler ; Vector Number 54,USART1 + DCD USART2_IRQHandler ; Vector Number 55,USART2 + DCD EXTI10_15_IRQHandler ; Vector Number 56,EXTI Line 10 to EXTI Line 15 + DCD RTC_Alarm_IRQHandler ; Vector Number 57,RTC Alarm through EXTI Line + DCD USBD_WKUP_IRQHandler ; Vector Number 58,USBD WakeUp from suspend through EXTI Line + DCD TIMER7_BRK_TIMER11_IRQHandler ; Vector Number 59,TIMER7 Break Interrupt and TIMER11 global + DCD TIMER7_UP_TIMER12_IRQHandler ; Vector Number 60,TIMER7 Update Interrupt and TIMER12 global + DCD TIMER7_TRG_CMT_TIMER13_IRQHandler ; Vector Number 61,TIMER7 Trigger and Commutation Interrupt and TIMER13 global + DCD TIMER7_Channel_IRQHandler ; Vector Number 62,TIMER7 Channel Capture Compare + DCD ADC2_IRQHandler ; Vector Number 63,ADC2 + DCD EXMC_IRQHandler ; Vector Number 64,EXMC + DCD SDIO_IRQHandler ; Vector Number 65,SDIO + DCD TIMER4_IRQHandler ; Vector Number 66,TIMER4 + DCD SPI2_IRQHandler ; Vector Number 67,SPI2 + DCD UART3_IRQHandler ; Vector Number 68,UART3 + DCD UART4_IRQHandler ; Vector Number 69,UART4 + DCD TIMER5_IRQHandler ; Vector Number 70,TIMER5 + DCD TIMER6_IRQHandler ; Vector Number 71,TIMER6 + DCD DMA1_Channel0_IRQHandler ; Vector Number 72,DMA1 Channel0 + DCD DMA1_Channel1_IRQHandler ; Vector Number 73,DMA1 Channel1 + DCD DMA1_Channel2_IRQHandler ; Vector Number 74,DMA1 Channel2 + DCD DMA1_Channel3_4_IRQHandler ; Vector Number 75,DMA1 Channel4 +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, = SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDGT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDGT_IRQHandler + B WWDGT_IRQHandler + + PUBWEAK LVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LVD_IRQHandler + B LVD_IRQHandler + + PUBWEAK TAMPER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMPER_IRQHandler + B TAMPER_IRQHandler + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK RCU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCU_IRQHandler + B RCU_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA0_Channel0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel0_IRQHandler + B DMA0_Channel0_IRQHandler + + + PUBWEAK DMA0_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel1_IRQHandler + B DMA0_Channel1_IRQHandler + + PUBWEAK DMA0_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel2_IRQHandler + B DMA0_Channel2_IRQHandler + + PUBWEAK DMA0_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel3_IRQHandler + B DMA0_Channel3_IRQHandler + + PUBWEAK DMA0_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel4_IRQHandler + B DMA0_Channel4_IRQHandler + + PUBWEAK DMA0_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel5_IRQHandler + B DMA0_Channel5_IRQHandler + + PUBWEAK DMA0_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA0_Channel6_IRQHandler + B DMA0_Channel6_IRQHandler + + PUBWEAK ADC0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC0_1_IRQHandler + B ADC0_1_IRQHandler + + PUBWEAK USBD_HP_CAN0_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_HP_CAN0_TX_IRQHandler + B USBD_HP_CAN0_TX_IRQHandler + + PUBWEAK USBD_LP_CAN0_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_LP_CAN0_RX0_IRQHandler + B USBD_LP_CAN0_RX0_IRQHandler + + PUBWEAK CAN0_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_RX1_IRQHandler + B CAN0_RX1_IRQHandler + + PUBWEAK CAN0_EWMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN0_EWMC_IRQHandler + B CAN0_EWMC_IRQHandler + + PUBWEAK EXTI5_9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI5_9_IRQHandler + B EXTI5_9_IRQHandler + + PUBWEAK TIMER0_BRK_TIMER8_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_BRK_TIMER8_IRQHandler + B TIMER0_BRK_TIMER8_IRQHandler + + PUBWEAK TIMER0_UP_TIMER9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_UP_TIMER9_IRQHandler + B TIMER0_UP_TIMER9_IRQHandler + + PUBWEAK TIMER0_TRG_CMT_TIMER10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_TRG_CMT_TIMER10_IRQHandler + B TIMER0_TRG_CMT_TIMER10_IRQHandler + + PUBWEAK TIMER0_Channel_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER0_Channel_IRQHandler + B TIMER0_Channel_IRQHandler + + PUBWEAK TIMER1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER1_IRQHandler + B TIMER1_IRQHandler + + PUBWEAK TIMER2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER2_IRQHandler + B TIMER2_IRQHandler + + PUBWEAK TIMER3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER3_IRQHandler + B TIMER3_IRQHandler + + PUBWEAK I2C0_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_EV_IRQHandler + B I2C0_EV_IRQHandler + + PUBWEAK I2C0_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C0_ER_IRQHandler + B I2C0_ER_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI0_IRQHandler + B SPI0_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART0_IRQHandler + B USART0_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK EXTI10_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI10_15_IRQHandler + B EXTI10_15_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK USBD_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USBD_WKUP_IRQHandler + B USBD_WKUP_IRQHandler + + PUBWEAK TIMER7_BRK_TIMER11_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_BRK_TIMER11_IRQHandler + B TIMER7_BRK_TIMER11_IRQHandler + + PUBWEAK TIMER7_UP_TIMER12_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_UP_TIMER12_IRQHandler + B TIMER7_UP_TIMER12_IRQHandler + + PUBWEAK TIMER7_TRG_CMT_TIMER13_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_TRG_CMT_TIMER13_IRQHandler + B TIMER7_TRG_CMT_TIMER13_IRQHandler + + PUBWEAK TIMER7_Channel_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER7_Channel_IRQHandler + B TIMER7_Channel_IRQHandler + + PUBWEAK ADC2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC2_IRQHandler + B ADC2_IRQHandler + + PUBWEAK EXMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXMC_IRQHandler + B EXMC_IRQHandler + + PUBWEAK SDIO_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDIO_IRQHandler + B SDIO_IRQHandler + + PUBWEAK TIMER4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER4_IRQHandler + B TIMER4_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK UART3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART3_IRQHandler + B UART3_IRQHandler + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART4_IRQHandler + B UART4_IRQHandler + + PUBWEAK TIMER5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER5_IRQHandler + B TIMER5_IRQHandler + + PUBWEAK TIMER6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIMER6_IRQHandler + B TIMER6_IRQHandler + + PUBWEAK DMA1_Channel0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel0_IRQHandler + B DMA1_Channel0_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_4_IRQHandler + B DMA1_Channel3_4_IRQHandler + + END diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/system_gd32f10x.c b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/system_gd32f10x.c new file mode 100644 index 0000000000000000000000000000000000000000..699179711a92fd11a2e5068f84da5b927ca54ec5 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/GD/GD32F10x/Source/system_gd32f10x.c @@ -0,0 +1,1028 @@ +/*! + \file system_gd32f10x.c + \brief CMSIS Cortex-M3 Device Peripheral Access Layer Source File for + GD32F10x Device Series +*/ + +/* + Copyright (c) 2012 ARM LIMITED + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +/* This file refers the CMSIS standard, some adjustments are made according to GigaDevice chips */ + +#include "gd32f10x.h" + +/* system frequency define */ +#define __IRC8M (IRC8M_VALUE) /* internal 8 MHz RC oscillator frequency */ +#define __HXTAL (HXTAL_VALUE) /* high speed crystal oscillator frequency */ +#define __SYS_OSC_CLK (__IRC8M) /* main oscillator frequency */ + +/* select a system clock by uncommenting the following line */ +/* use IRC8M */ +//#define __SYSTEM_CLOCK_48M_PLL_IRC8M (uint32_t)(48000000) +//#define __SYSTEM_CLOCK_72M_PLL_IRC8M (uint32_t)(72000000) +//#define __SYSTEM_CLOCK_108M_PLL_IRC8M (uint32_t)(108000000) + +/* use HXTAL (XD series CK_HXTAL = 8M, CL series CK_HXTAL = 25M) */ +//#define __SYSTEM_CLOCK_HXTAL (uint32_t)(__HXTAL) +//#define __SYSTEM_CLOCK_24M_PLL_HXTAL (uint32_t)(24000000) +//#define __SYSTEM_CLOCK_36M_PLL_HXTAL (uint32_t)(36000000) +//#define __SYSTEM_CLOCK_48M_PLL_HXTAL (uint32_t)(48000000) +//#define __SYSTEM_CLOCK_56M_PLL_HXTAL (uint32_t)(56000000) +//#define __SYSTEM_CLOCK_72M_PLL_HXTAL (uint32_t)(72000000) +//#define __SYSTEM_CLOCK_96M_PLL_HXTAL (uint32_t)(96000000) +#define __SYSTEM_CLOCK_108M_PLL_HXTAL (uint32_t)(108000000) + +#define SEL_IRC8M 0x00U +#define SEL_HXTAL 0x01U +#define SEL_PLL 0x02U + +/* set the system clock frequency and declare the system clock configuration function */ +#ifdef __SYSTEM_CLOCK_48M_PLL_IRC8M +uint32_t SystemCoreClock = __SYSTEM_CLOCK_48M_PLL_IRC8M; +static void system_clock_48m_irc8m(void); +#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_IRC8M; +static void system_clock_72m_irc8m(void); +#elif defined (__SYSTEM_CLOCK_108M_PLL_IRC8M) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_108M_PLL_IRC8M; +static void system_clock_108m_irc8m(void); + +#elif defined (__SYSTEM_CLOCK_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_HXTAL; +static void system_clock_hxtal(void); +#elif defined (__SYSTEM_CLOCK_24M_PLL_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_24M_PLL_HXTAL; +static void system_clock_24m_hxtal(void); +#elif defined (__SYSTEM_CLOCK_36M_PLL_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_36M_PLL_HXTAL; +static void system_clock_36m_hxtal(void); +#elif defined (__SYSTEM_CLOCK_48M_PLL_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_48M_PLL_HXTAL; +static void system_clock_48m_hxtal(void); +#elif defined (__SYSTEM_CLOCK_56M_PLL_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_56M_PLL_HXTAL; +static void system_clock_56m_hxtal(void); +#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_HXTAL; +static void system_clock_72m_hxtal(void); +#elif defined (__SYSTEM_CLOCK_96M_PLL_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_96M_PLL_HXTAL; +static void system_clock_96m_hxtal(void); +#elif defined (__SYSTEM_CLOCK_108M_PLL_HXTAL) +uint32_t SystemCoreClock = __SYSTEM_CLOCK_108M_PLL_HXTAL; +static void system_clock_108m_hxtal(void); +#endif /* __SYSTEM_CLOCK_48M_PLL_IRC8M */ + +/* configure the system clock */ +static void system_clock_config(void); + +/*! + \brief configure the system clock + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_config(void) +{ +#ifdef __SYSTEM_CLOCK_HXTAL + system_clock_hxtal(); +#elif defined (__SYSTEM_CLOCK_24M_PLL_HXTAL) + system_clock_24m_hxtal(); +#elif defined (__SYSTEM_CLOCK_36M_PLL_HXTAL) + system_clock_36m_hxtal(); +#elif defined (__SYSTEM_CLOCK_48M_PLL_HXTAL) + system_clock_48m_hxtal(); +#elif defined (__SYSTEM_CLOCK_56M_PLL_HXTAL) + system_clock_56m_hxtal(); +#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL) + system_clock_72m_hxtal(); +#elif defined (__SYSTEM_CLOCK_96M_PLL_HXTAL) + system_clock_96m_hxtal(); +#elif defined (__SYSTEM_CLOCK_108M_PLL_HXTAL) + system_clock_108m_hxtal(); + +#elif defined (__SYSTEM_CLOCK_48M_PLL_IRC8M) + system_clock_48m_irc8m(); +#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M) + system_clock_72m_irc8m(); +#elif defined (__SYSTEM_CLOCK_108M_PLL_IRC8M) + system_clock_108m_irc8m(); +#endif /* __SYSTEM_CLOCK_HXTAL */ +} + +/*! + \brief setup the microcontroller system, initialize the system + \param[in] none + \param[out] none + \retval none +*/ +void SystemInit(void) +{ + /* reset the RCC clock configuration to the default reset state */ + /* enable IRC8M */ + RCU_CTL |= RCU_CTL_IRC8MEN; + + /* reset SCS, AHBPSC, APB1PSC, APB2PSC, ADCPSC, CKOUT0SEL bits */ + RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | + RCU_CFG0_ADCPSC | RCU_CFG0_ADCPSC_2 | RCU_CFG0_CKOUT0SEL); + + /* reset HXTALEN, CKMEN, PLLEN bits */ + RCU_CTL &= ~(RCU_CTL_HXTALEN | RCU_CTL_CKMEN | RCU_CTL_PLLEN); + + /* Reset HXTALBPS bit */ + RCU_CTL &= ~(RCU_CTL_HXTALBPS); + + /* reset PLLSEL, PREDV0_LSB, PLLMF, USBFSPSC bits */ + +#ifdef GD32F10X_CL + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0_LSB | RCU_CFG0_PLLMF | + RCU_CFG0_USBFSPSC | RCU_CFG0_PLLMF_4); + + RCU_CFG1 = 0x00000000U; +#else + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0 | RCU_CFG0_PLLMF | + RCU_CFG0_USBDPSC | RCU_CFG0_PLLMF_4); +#endif /* GD32F10X_CL */ + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* reset HXTALEN, CKMEN and PLLEN bits */ + RCU_CTL &= ~(RCU_CTL_PLLEN | RCU_CTL_CKMEN | RCU_CTL_HXTALEN); + /* disable all interrupts */ + RCU_INT = 0x009F0000U; +#elif defined(GD32F10X_CL) + /* Reset HXTALEN, CKMEN, PLLEN, PLL1EN and PLL2EN bits */ + RCU_CTL &= ~(RCU_CTL_PLLEN | RCU_CTL_PLL1EN | RCU_CTL_PLL2EN | RCU_CTL_CKMEN | RCU_CTL_HXTALEN); + /* disable all interrupts */ + RCU_INT = 0x00FF0000U; +#endif + + /* Configure the System clock source, PLL Multiplier, AHB/APBx prescalers and Flash settings */ + system_clock_config(); +} + +/*! + \brief update the SystemCoreClock with current core clock retrieved from cpu registers + \param[in] none + \param[out] none + \retval none +*/ +void SystemCoreClockUpdate(void) +{ + uint32_t scss; + uint32_t pllsel, predv0sel, pllmf, ck_src; +#ifdef GD32F10X_CL + uint32_t predv0, predv1, pll1mf; +#endif /* GD32F10X_CL */ + + scss = GET_BITS(RCU_CFG0, 2, 3); + + switch (scss) + { + /* IRC8M is selected as CK_SYS */ + case SEL_IRC8M: + SystemCoreClock = IRC8M_VALUE; + break; + + /* HXTAL is selected as CK_SYS */ + case SEL_HXTAL: + SystemCoreClock = HXTAL_VALUE; + break; + + /* PLL is selected as CK_SYS */ + case SEL_PLL: + /* PLL clock source selection, HXTAL or IRC8M/2 */ + pllsel = (RCU_CFG0 & RCU_CFG0_PLLSEL); + + + if(RCU_PLLSRC_IRC8M_DIV2 == pllsel){ + /* PLL clock source is IRC8M/2 */ + ck_src = IRC8M_VALUE / 2U; + }else{ + /* PLL clock source is HXTAL */ + ck_src = HXTAL_VALUE; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + predv0sel = (RCU_CFG0 & RCU_CFG0_PREDV0); + + /* PREDV0 input source clock divided by 2 */ + if(RCU_CFG0_PREDV0 == predv0sel){ + ck_src = HXTAL_VALUE / 2U; + } +#elif defined(GD32F10X_CL) + predv0sel = (RCU_CFG1 & RCU_CFG1_PREDV0SEL); + + /* source clock use PLL1 */ + if(RCU_PREDV0SRC_CKPLL1 == predv0sel){ + predv1 = ((RCU_CFG1 & RCU_CFG1_PREDV1) >> 4) + 1U; + pll1mf = ((RCU_CFG1 & RCU_CFG1_PLL1MF) >> 8) + 2U; + if(17U == pll1mf){ + pll1mf = 20U; + } + ck_src = (ck_src / predv1) * pll1mf; + } + predv0 = (RCU_CFG1 & RCU_CFG1_PREDV0) + 1U; + ck_src /= predv0; +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + } + + /* PLL multiplication factor */ + pllmf = GET_BITS(RCU_CFG0, 18, 21); + + if((RCU_CFG0 & RCU_CFG0_PLLMF_4)){ + pllmf |= 0x10U; + } + + if(pllmf >= 15U){ + pllmf += 1U; + }else{ + pllmf += 2U; + } + + SystemCoreClock = ck_src * pllmf; + +#ifdef GD32F10X_CL + if(15U == pllmf){ + /* PLL source clock multiply by 6.5 */ + SystemCoreClock = ck_src * 6U + ck_src / 2U; + } +#endif /* GD32F10X_CL */ + + break; + + /* IRC8M is selected as CK_SYS */ + default: + SystemCoreClock = IRC8M_VALUE; + break; + } +} + +#ifdef __SYSTEM_CLOCK_HXTAL +/*! + \brief configure the system clock to HXTAL + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + + /* select HXTAL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_HXTAL; + + /* wait until HXTAL is selected as system clock */ + while(0 == (RCU_CFG0 & RCU_SCSS_HXTAL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_24M_PLL_HXTAL) +/*! + \brief configure the system clock to 24M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_24m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* select HXTAL/2 as clock source */ + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_CFG0_PREDV0); + + /* CK_PLL = (CK_HXTAL/2) * 6 = 24 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL6; + +#elif defined(GD32F10X_CL) + /* CK_PLL = (CK_PREDIV0) * 6 = 24 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL6); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_36M_PLL_HXTAL) +/*! + \brief configure the system clock to 36M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_36m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* select HXTAL/2 as clock source */ + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_CFG0_PREDV0); + + /* CK_PLL = (CK_HXTAL/2) * 9 = 36 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL9; + +#elif defined(GD32F10X_CL) + /* CK_PLL = (CK_PREDIV0) * 9 = 36 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL9); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_48M_PLL_HXTAL) +/*! + \brief configure the system clock to 48M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_48m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* select HXTAL/2 as clock source */ + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_CFG0_PREDV0); + + /* CK_PLL = (CK_HXTAL/2) * 12 = 48 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL12; + +#elif defined(GD32F10X_CL) + /* CK_PLL = (CK_PREDIV0) * 12 = 48 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL12); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_56M_PLL_HXTAL) +/*! + \brief configure the system clock to 56M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_56m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* select HXTAL/2 as clock source */ + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_CFG0_PREDV0); + + /* CK_PLL = (CK_HXTAL/2) * 14 = 56 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL14; + +#elif defined(GD32F10X_CL) + /* CK_PLL = (CK_PREDIV0) * 14 = 56 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL14); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL) +/*! + \brief configure the system clock to 72M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_72m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* select HXTAL/2 as clock source */ + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_CFG0_PREDV0); + + /* CK_PLL = (CK_HXTAL/2) * 18 = 72 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL18; + +#elif defined(GD32F10X_CL) + /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL18); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_96M_PLL_HXTAL) +/*! + \brief configure the system clock to 96M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_96m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* select HXTAL/2 as clock source */ + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_CFG0_PREDV0); + + /* CK_PLL = (CK_HXTAL/2) * 24 = 96 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL24; + +#elif defined(GD32F10X_CL) + /* CK_PLL = (CK_PREDIV0) * 24 = 96 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL24); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_108M_PLL_HXTAL) +/*! + \brief configure the system clock to 108M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_108m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + /* select HXTAL/2 as clock source */ + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_CFG0_PREDV0); + + /* CK_PLL = (CK_HXTAL/2) * 27 = 108 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL27; + +#elif defined(GD32F10X_CL) + /* CK_PLL = (CK_PREDIV0) * 27 = 108 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL27); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while(0U == (RCU_CTL & RCU_CTL_PLL1STB)){ + } +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_48M_PLL_IRC8M) +/*! + \brief configure the system clock to 48M by PLL which selects IRC8M as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_48m_irc8m(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable IRC8M */ + RCU_CTL |= RCU_CTL_IRC8MEN; + + /* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB); + } + while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){ + while(1){ + } + } + + /* IRC8M is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + + /* CK_PLL = (CK_IRC8M/2) * 12 = 48 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL12; + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M) +/*! + \brief configure the system clock to 72M by PLL which selects IRC8M as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_72m_irc8m(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable IRC8M */ + RCU_CTL |= RCU_CTL_IRC8MEN; + + /* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB); + } + while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){ + while(1){ + } + } + + /* IRC8M is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + + /* CK_PLL = (CK_IRC8M/2) * 18 = 72 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL18; + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_108M_PLL_IRC8M) +/*! + \brief configure the system clock to 108M by PLL which selects IRC8M as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_108m_irc8m(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable IRC8M */ + RCU_CTL |= RCU_CTL_IRC8MEN; + + /* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB); + } + while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){ + while(1){ + } + } + + /* IRC8M is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + + /* CK_PLL = (CK_IRC8M/2) * 27 = 108 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= RCU_PLL_MUL27; + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#endif diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/core_cm3.h b/bsp/gd32105c-eval/Libraries/CMSIS/core_cm3.h new file mode 100644 index 0000000000000000000000000000000000000000..1b661b442106639bfab96a32046f6a68a9ea021d --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/core_cm3.h @@ -0,0 +1,1638 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V3.30 + * @date 17. February 2014 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2014 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup Cortex_M3 + @{ + */ + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) /* Cosmic */ + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI__VFP_SUPPORT____ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) /* Cosmic */ + #if ( __CSMC__ & 0x400) // FPU present for parser + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200 + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if (__CM3_REV < 0x0201) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1]; + __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1]; + __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1]; + __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2]; + __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55]; + __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131]; + __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759]; + __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1]; + __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39]; + __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8]; + __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** \brief Set Priority Grouping + + The function sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** \brief Get Priority Grouping + + The function reads the priority grouping field from the NVIC Interrupt Controller. + + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + + +/** \brief Enable External Interrupt + + The function enables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + + +/** \brief Disable External Interrupt + + The function disables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + + +/** \brief Get Pending Interrupt + + The function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + + +/** \brief Set Pending Interrupt + + The function sets the pending bit of an external interrupt. + + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + + +/** \brief Clear Pending Interrupt + + The function clears the pending bit of an external interrupt. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Get Active Interrupt + + The function reads the active register in NVIC and returns the active bit. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + + +/** \brief Set Interrupt Priority + + The function sets the priority of an interrupt. + + \note The priority cannot be set for every core interrupt. + + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + + +/** \brief Get Interrupt Priority + + The function reads the priority of an interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented + priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief Encode Priority + + The function encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set. + + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** \brief Decode Priority + + The function decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + +/** \brief System Reset + + The function initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + The function initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + + \param [in] ticks Number of ticks between two interrupts. + + \return 0 Function succeeded. + \return 1 Function failed. + + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** \brief ITM Send Character + + The function transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + + \param [in] ch Character to transmit. + + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** \brief ITM Receive Character + + The function inputs a character via the external variable \ref ITM_RxBuffer. + + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) { + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** \brief ITM Check Character + + The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/core_cmFunc.h b/bsp/gd32105c-eval/Libraries/CMSIS/core_cmFunc.h new file mode 100644 index 0000000000000000000000000000000000000000..01089f1333bd097ac99868e007c84e1cb6ef85a6 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/core_cmFunc.h @@ -0,0 +1,637 @@ +/**************************************************************************//** + * @file core_cmFunc.h + * @brief CMSIS Cortex-M Core Function Access Header File + * @version V4.00 + * @date 28. August 2014 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2014 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CORE_CMFUNC_H +#define __CORE_CMFUNC_H + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#if (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + +/** \brief Get Control Register + + This function returns the content of the Control Register. + + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** \brief Set Control Register + + This function writes the given value to the Control Register. + + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** \brief Get IPSR Register + + This function returns the content of the IPSR Register. + + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** \brief Get APSR Register + + This function returns the content of the APSR Register. + + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** \brief Get xPSR Register + + This function returns the content of the xPSR Register. + + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** \brief Get Process Stack Pointer + + This function returns the current value of the Process Stack Pointer (PSP). + + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** \brief Set Process Stack Pointer + + This function assigns the given value to the Process Stack Pointer (PSP). + + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** \brief Get Main Stack Pointer + + This function returns the current value of the Main Stack Pointer (MSP). + + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** \brief Set Main Stack Pointer + + This function assigns the given value to the Main Stack Pointer (MSP). + + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** \brief Get Priority Mask + + This function returns the current state of the priority mask bit from the Priority Mask Register. + + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** \brief Set Priority Mask + + This function assigns the given value to the Priority Mask Register. + + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) + +/** \brief Enable FIQ + + This function enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** \brief Disable FIQ + + This function disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** \brief Get Base Priority + + This function returns the current value of the Base Priority register. + + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** \brief Set Base Priority + + This function assigns the given value to the Base Priority register. + + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + + +/** \brief Get Fault Mask + + This function returns the current value of the Fault Mask register. + + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** \brief Set Fault Mask + + This function assigns the given value to the Fault Mask register. + + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1); +} + +#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */ + + +#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) + +/** \brief Get FPSCR + + This function returns the current value of the Floating Point Status/Control register. + + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0); +#endif +} + + +/** \brief Set FPSCR + + This function assigns the given value to the Floating Point Status/Control register. + + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#endif +} + +#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */ + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** \brief Enable IRQ Interrupts + + This function enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** \brief Disable IRQ Interrupts + + This function disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** \brief Get Control Register + + This function returns the content of the Control Register. + + \return Control Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +/** \brief Set Control Register + + This function writes the given value to the Control Register. + + \param [in] control Control Register value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +/** \brief Get IPSR Register + + This function returns the content of the IPSR Register. + + \return IPSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get APSR Register + + This function returns the content of the APSR Register. + + \return APSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get xPSR Register + + This function returns the content of the xPSR Register. + + \return xPSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get Process Stack Pointer + + This function returns the current value of the Process Stack Pointer (PSP). + + \return PSP Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psp\n" : "=r" (result) ); + return(result); +} + + +/** \brief Set Process Stack Pointer + + This function assigns the given value to the Process Stack Pointer (PSP). + + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp"); +} + + +/** \brief Get Main Stack Pointer + + This function returns the current value of the Main Stack Pointer (MSP). + + \return MSP Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msp\n" : "=r" (result) ); + return(result); +} + + +/** \brief Set Main Stack Pointer + + This function assigns the given value to the Main Stack Pointer (MSP). + + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp"); +} + + +/** \brief Get Priority Mask + + This function returns the current state of the priority mask bit from the Priority Mask Register. + + \return Priority Mask value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +/** \brief Set Priority Mask + + This function assigns the given value to the Priority Mask Register. + + \param [in] priMask Priority Mask + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Enable FIQ + + This function enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** \brief Disable FIQ + + This function disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** \brief Get Base Priority + + This function returns the current value of the Base Priority register. + + \return Base Priority register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + + +/** \brief Set Base Priority + + This function assigns the given value to the Base Priority register. + + \param [in] basePri Base Priority value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory"); +} + + +/** \brief Get Fault Mask + + This function returns the current value of the Fault Mask register. + + \return Fault Mask register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +/** \brief Set Fault Mask + + This function assigns the given value to the Fault Mask register. + + \param [in] faultMask Fault Mask value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + +#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) + +/** \brief Get FPSCR + + This function returns the current value of the Floating Point Status/Control register. + + \return Floating Point Status/Control register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + uint32_t result; + + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile (""); + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + __ASM volatile (""); + return(result); +#else + return(0); +#endif +} + + +/** \brief Set FPSCR + + This function assigns the given value to the Floating Point Status/Control register. + + \param [in] fpscr Floating Point Status/Control value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile (""); + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc"); + __ASM volatile (""); +#endif +} + +#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */ + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#include + + +#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +/* TI CCS specific functions */ +#include + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + +#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/ +/* Cosmic specific functions */ +#include + +#endif + +/*@} end of CMSIS_Core_RegAccFunctions */ + +#endif /* __CORE_CMFUNC_H */ diff --git a/bsp/gd32105c-eval/Libraries/CMSIS/core_cmInstr.h b/bsp/gd32105c-eval/Libraries/CMSIS/core_cmInstr.h new file mode 100644 index 0000000000000000000000000000000000000000..856b4c3c61c8f8bd04b14770fccfa902d4d112bf --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/CMSIS/core_cmInstr.h @@ -0,0 +1,880 @@ +/**************************************************************************//** + * @file core_cmInstr.h + * @brief CMSIS Cortex-M Core Instruction Access Header File + * @version V4.00 + * @date 28. August 2014 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2014 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CORE_CMINSTR_H +#define __CORE_CMINSTR_H + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#if (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +#define __ISB() __isb(0xF) + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __dsb(0xF) + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __dmb(0xF) + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** \brief Rotate Right in unsigned value (32 bit) + + This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** \brief Breakpoint + + This function causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __rbit + + +/** \brief LDR Exclusive (8 bit) + + This function executes a exclusive LDR instruction for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) + + +/** \brief LDR Exclusive (16 bit) + + This function executes a exclusive LDR instruction for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) + + +/** \brief LDR Exclusive (32 bit) + + This function executes a exclusive LDR instruction for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) + + +/** \brief STR Exclusive (8 bit) + + This function executes a exclusive STR instruction for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (16 bit) + + This function executes a exclusive STR instruction for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (32 bit) + + This function executes a exclusive STR instruction for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW(value, ptr) __strex(value, ptr) + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +#define __CLREX __clrex + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +/** \brief Rotate Right with Extend (32 bit) + + This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring. + + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** \brief LDRT Unprivileged (8 bit) + + This function executes a Unprivileged LDRT instruction for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** \brief LDRT Unprivileged (16 bit) + + This function executes a Unprivileged LDRT instruction for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** \brief LDRT Unprivileged (32 bit) + + This function executes a Unprivileged LDRT instruction for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** \brief STRT Unprivileged (8 bit) + + This function executes a Unprivileged STRT instruction for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** \brief STRT Unprivileged (16 bit) + + This function executes a Unprivileged STRT instruction for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** \brief STRT Unprivileged (32 bit) + + This function executes a Unprivileged STRT instruction for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */ + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constrant "l" + * Otherwise, use general registers, specified by constrant "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void) +{ + __ASM volatile ("nop"); +} + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void) +{ + __ASM volatile ("wfi"); +} + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void) +{ + __ASM volatile ("wfe"); +} + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void) +{ + __ASM volatile ("sev"); +} + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void) +{ + __ASM volatile ("isb"); +} + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void) +{ + __ASM volatile ("dsb"); +} + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void) +{ + __ASM volatile ("dmb"); +} + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +#endif +} + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (short)__builtin_bswap16(value); +#else + uint32_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +#endif +} + + +/** \brief Rotate Right in unsigned value (32 bit) + + This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + return (op1 >> op2) | (op1 << (32 - op2)); +} + + +/** \brief Breakpoint + + This function causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief LDR Exclusive (8 bit) + + This function executes a exclusive LDR instruction for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** \brief LDR Exclusive (16 bit) + + This function executes a exclusive LDR instruction for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** \brief LDR Exclusive (32 bit) + + This function executes a exclusive LDR instruction for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** \brief STR Exclusive (8 bit) + + This function executes a exclusive STR instruction for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** \brief STR Exclusive (16 bit) + + This function executes a exclusive STR instruction for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** \brief STR Exclusive (32 bit) + + This function executes a exclusive STR instruction for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** \brief Rotate Right with Extend (32 bit) + + This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring. + + \param [in] value Value to rotate + \return Rotated value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** \brief LDRT Unprivileged (8 bit) + + This function executes a Unprivileged LDRT instruction for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** \brief LDRT Unprivileged (16 bit) + + This function executes a Unprivileged LDRT instruction for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** \brief LDRT Unprivileged (32 bit) + + This function executes a Unprivileged LDRT instruction for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** \brief STRT Unprivileged (8 bit) + + This function executes a Unprivileged STRT instruction for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); +} + + +/** \brief STRT Unprivileged (16 bit) + + This function executes a Unprivileged STRT instruction for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); +} + + +/** \brief STRT Unprivileged (32 bit) + + This function executes a Unprivileged STRT instruction for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) ); +} + +#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */ + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#include + + +#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +/* TI CCS specific functions */ +#include + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + +#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/ +/* Cosmic specific functions */ +#include + +#endif + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + +#endif /* __CORE_CMINSTR_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_adc.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_adc.h new file mode 100644 index 0000000000000000000000000000000000000000..bb61cd73b55efb232dc5ae484e282fc810a18709 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_adc.h @@ -0,0 +1,368 @@ +/*! + \file gd32f10x_adc.h + \brief definitions for the ADC + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10x_ADC_H +#define GD32F10x_ADC_H + +#include "gd32f10x.h" + +/* ADC definitions */ +#define ADC0 ADC_BASE +#define ADC1 (ADC_BASE + 0x400U) +#define ADC2 (ADC_BASE + 0x1800U) + +/* registers definitions */ +#define ADC_STAT(adcx) REG32((adcx) + 0x00U) /*!< ADC status register */ +#define ADC_CTL0(adcx) REG32((adcx) + 0x04U) /*!< ADC control register 0 */ +#define ADC_CTL1(adcx) REG32((adcx) + 0x08U) /*!< ADC control register 1 */ +#define ADC_SAMPT0(adcx) REG32((adcx) + 0x0CU) /*!< ADC sampling time register 0 */ +#define ADC_SAMPT1(adcx) REG32((adcx) + 0x10U) /*!< ADC sampling time register 1 */ +#define ADC_IOFF0(adcx) REG32((adcx) + 0x14U) /*!< ADC inserted channel data offset register 0 */ +#define ADC_IOFF1(adcx) REG32((adcx) + 0x18U) /*!< ADC inserted channel data offset register 1 */ +#define ADC_IOFF2(adcx) REG32((adcx) + 0x1CU) /*!< ADC inserted channel data offset register 2 */ +#define ADC_IOFF3(adcx) REG32((adcx) + 0x20U) /*!< ADC inserted channel data offset register 3 */ +#define ADC_WDHT(adcx) REG32((adcx) + 0x24U) /*!< ADC watchdog high threshold register */ +#define ADC_WDLT(adcx) REG32((adcx) + 0x28U) /*!< ADC watchdog low threshold register */ +#define ADC_RSQ0(adcx) REG32((adcx) + 0x2CU) /*!< ADC regular sequence register 0 */ +#define ADC_RSQ1(adcx) REG32((adcx) + 0x30U) /*!< ADC regular sequence register 1 */ +#define ADC_RSQ2(adcx) REG32((adcx) + 0x34U) /*!< ADC regular sequence register 2 */ +#define ADC_ISQ(adcx) REG32((adcx) + 0x38U) /*!< ADC inserted sequence register */ +#define ADC_IDATA0(adcx) REG32((adcx) + 0x3CU) /*!< ADC inserted data register 0 */ +#define ADC_IDATA1(adcx) REG32((adcx) + 0x40U) /*!< ADC inserted data register 1 */ +#define ADC_IDATA2(adcx) REG32((adcx) + 0x44U) /*!< ADC inserted data register 2 */ +#define ADC_IDATA3(adcx) REG32((adcx) + 0x48U) /*!< ADC inserted data register 3 */ +#define ADC_RDATA(adcx) REG32((adcx) + 0x4CU) /*!< ADC regular data register */ + +/* bits definitions */ +/* ADC_STAT */ +#define ADC_STAT_WDE BIT(0) /*!< analog watchdog event flag */ +#define ADC_STAT_EOC BIT(1) /*!< end of conversion */ +#define ADC_STAT_EOIC BIT(2) /*!< inserted channel end of conversion */ +#define ADC_STAT_STIC BIT(3) /*!< inserted channel start flag */ +#define ADC_STAT_STRC BIT(4) /*!< regular channel start flag */ + +/* ADC_CTL0 */ +#define ADC_CTL0_WDCHSEL BITS(0,4) /*!< analog watchdog channel select bits */ +#define ADC_CTL0_EOCIE BIT(5) /*!< interrupt enable for EOC */ +#define ADC_CTL0_WDEIE BIT(6) /*!< analog watchdog interrupt enable */ +#define ADC_CTL0_EOICIE BIT(7) /*!< interrupt enable for inserted channels */ +#define ADC_CTL0_SM BIT(8) /*!< scan mode */ +#define ADC_CTL0_WDSC BIT(9) /*!< when in scan mode, analog watchdog is effective on a single channel */ +#define ADC_CTL0_ICA BIT(10) /*!< automatic inserted group conversion */ +#define ADC_CTL0_DISRC BIT(11) /*!< discontinuous mode on regular channels */ +#define ADC_CTL0_DISIC BIT(12) /*!< discontinuous mode on inserted channels */ +#define ADC_CTL0_DISNUM BITS(13,15) /*!< discontinuous mode channel count */ +#define ADC_CTL0_SYNCM BITS(16,19) /*!< sync mode selection */ +#define ADC_CTL0_IWDEN BIT(22) /*!< analog watchdog enable on inserted channels */ +#define ADC_CTL0_RWDEN BIT(23) /*!< analog watchdog enable on regular channels */ +#define ADC_CTL0_DRES BITS(24,25) /*!< ADC data resolution */ + +/* ADC_CTL1 */ +#define ADC_CTL1_ADCON BIT(0) /*!< ADC converter on */ +#define ADC_CTL1_CTN BIT(1) /*!< continuous conversion */ +#define ADC_CTL1_CLB BIT(2) /*!< ADC calibration */ +#define ADC_CTL1_RSTCLB BIT(3) /*!< reset calibration */ +#define ADC_CTL1_DMA BIT(8) /*!< direct memory access mode */ +#define ADC_CTL1_DAL BIT(11) /*!< data alignment */ +#define ADC_CTL1_ETSIC BITS(12,14) /*!< external trigger select for inserted channel */ +#define ADC_CTL1_ETEIC BIT(15) /*!< external trigger enable for inserted channel */ +#define ADC_CTL1_ETSRC BITS(17,19) /*!< external trigger select for regular channel */ +#define ADC_CTL1_ETERC BIT(20) /*!< external trigger conversion mode for inserted channels */ +#define ADC_CTL1_SWICST BIT(21) /*!< start on inserted channel */ +#define ADC_CTL1_SWRCST BIT(22) /*!< start on regular channel */ +#define ADC_CTL1_TSVREN BIT(23) /*!< channel 16 and 17 enable of ADC0 */ + +/* ADC_SAMPTx x=0..1 */ +#define ADC_SAMPTX_SPTN BITS(0,2) /*!< channel n sample time selection */ + +/* ADC_IOFFx x=0..3 */ +#define ADC_IOFFX_IOFF BITS(0,11) /*!< data offset for inserted channel x */ + +/* ADC_WDHT */ +#define ADC_WDHT_WDHT BITS(0,11) /*!< analog watchdog high threshold */ + +/* ADC_WDLT */ +#define ADC_WDLT_WDLT BITS(0,11) /*!< analog watchdog low threshold */ + +/* ADC_RSQx x=0..2 */ +#define ADC_RSQX_RSQN BITS(0,4) /*!< nth conversion in regular sequence */ +#define ADC_RSQ0_RL BITS(20,23) /*!< regular channel sequence length */ + +/* ADC_ISQ */ +#define ADC_ISQ_ISQN BITS(0,4) /*!< nth conversion in inserted sequence */ +#define ADC_ISQ_IL BITS(20,21) /*!< inserted sequence length */ + +/* ADC_IDATAx x=0..3*/ +#define ADC_IDATAX_IDATAN BITS(0,15) /*!< inserted data n */ + +/* ADC_RDATA */ +#define ADC_RDATA_RDATA BITS(0,15) /*!< regular data */ +#define ADC_RDATA_ADC1RDTR BITS(16,31) /*!< ADC1 regular channel data */ + +/* constants definitions */ +/* adc_stat register value */ +#define ADC_FLAG_WDE ADC_STAT_WDE /*!< analog watchdog event flag */ +#define ADC_FLAG_EOC ADC_STAT_EOC /*!< end of conversion */ +#define ADC_FLAG_EOIC ADC_STAT_EOIC /*!< inserted channel end of conversion */ +#define ADC_FLAG_STIC ADC_STAT_STIC /*!< inserted channel start flag */ +#define ADC_FLAG_STRC ADC_STAT_STRC /*!< regular channel start flag */ + +/* adc_ctl0 register value */ +#define CTL0_DISNUM(regval) (BITS(13,15) & ((uint32_t)(regval) << 13)) /*!< write value to ADC_CTL0_DISNUM bit field */ + +/* scan mode */ +#define ADC_SCAN_MODE ADC_CTL0_SM /*!< scan mode */ + +/* inserted channel group convert automatically */ +#define ADC_INSERTED_CHANNEL_AUTO ADC_CTL0_ICA /*!< inserted channel group convert automatically */ + +/* ADC sync mode */ +#define CTL0_SYNCM(regval) (BITS(16,19) & ((uint32_t)(regval) << 16)) /*!< write value to ADC_CTL0_SYNCM bit field */ +#define ADC_MODE_FREE CTL0_SYNCM(0) /*!< all the ADCs work independently */ +#define ADC_DAUL_REGULAL_PARALLEL_INSERTED_PARALLEL CTL0_SYNCM(1) /*!< ADC0 and ADC1 work in combined regular parallel + inserted parallel mode */ +#define ADC_DAUL_REGULAL_PARALLEL_INSERTED_ROTATION CTL0_SYNCM(2) /*!< ADC0 and ADC1 work in combined regular parallel + trigger rotation mode */ +#define ADC_DAUL_INSERTED_PARALLEL_REGULAL_FOLLOWUP_FAST CTL0_SYNCM(3) /*!< ADC0 and ADC1 work in combined inserted parallel + follow-up fast mode */ +#define ADC_DAUL_INSERTED_PARALLEL_REGULAL_FOLLOWUP_SLOW CTL0_SYNCM(4) /*!< ADC0 and ADC1 work in combined inserted parallel + follow-up slow mode */ +#define ADC_DAUL_INSERTED_PARALLEL CTL0_SYNCM(5) /*!< ADC0 and ADC1 work in inserted parallel mode only */ +#define ADC_DAUL_REGULAL_PARALLEL CTL0_SYNCM(6) /*!< ADC0 and ADC1 work in regular parallel mode only */ +#define ADC_DAUL_REGULAL_FOLLOWUP_FAST CTL0_SYNCM(7) /*!< ADC0 and ADC1 work in follow-up fast mode only */ +#define ADC_DAUL_REGULAL_FOLLOWUP_SLOW CTL0_SYNCM(8) /*!< ADC0 and ADC1 work in follow-up slow mode only */ +#define ADC_DAUL_INSERTED_TRIGGER_ROTATION CTL0_SYNCM(9) /*!< ADC0 and ADC1 work in trigger rotation mode only */ + +/* adc_ctl1 register value */ +#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000U) /*!< LSB alignment */ +#define ADC_DATAALIGN_LEFT ADC_CTL1_DAL /*!< MSB alignment */ + +/* continuous mode */ +#define ADC_CONTINUOUS_MODE ADC_CTL1_CTN /*!< continuous mode */ + +/* external trigger select for regular channel */ +#define CTL1_ETSRC(regval) (BITS(17,19) & ((uint32_t)(regval) << 17)) /*!< write value to ADC_CTL1_ETSRC bit field */ +/* for ADC0 and ADC1 regular channel */ +#define ADC0_1_EXTTRIG_REGULAR_T0_CH0 CTL1_ETSRC(0) /*!< TIMER0 CH0 event select */ +#define ADC0_1_EXTTRIG_REGULAR_T0_CH1 CTL1_ETSRC(1) /*!< TIMER0 CH1 event select */ +#define ADC0_1_EXTTRIG_REGULAR_T0_CH2 CTL1_ETSRC(2) /*!< TIMER0 CH2 event select */ +#define ADC0_1_EXTTRIG_REGULAR_T1_CH1 CTL1_ETSRC(3) /*!< TIMER1 CH1 event select */ +#define ADC0_1_EXTTRIG_REGULAR_T2_TRGO CTL1_ETSRC(4) /*!< TIMER2 TRGO event select */ +#define ADC0_1_EXTTRIG_REGULAR_T3_CH3 CTL1_ETSRC(5) /*!< TIMER3 CH3 event select */ +#define ADC0_1_EXTTRIG_REGULAR_T7_TRGO CTL1_ETSRC(6) /*!< TIMER7 TRGO event select */ +#define ADC0_1_EXTTRIG_REGULAR_EXTI_11 CTL1_ETSRC(6) /*!< external interrupt line 11 */ +#define ADC0_1_2_EXTTRIG_REGULAR_NONE CTL1_ETSRC(7) /*!< software trigger */ +/* for ADC2 regular channel */ +#define ADC2_EXTTRIG_REGULAR_T2_CH0 CTL1_ETSRC(0) /*!< TIMER2 CH0 event select */ +#define ADC2_EXTTRIG_REGULAR_T1_CH2 CTL1_ETSRC(1) /*!< TIMER1 CH2 event select */ +#define ADC2_EXTTRIG_REGULAR_T0_CH2 CTL1_ETSRC(2) /*!< TIMER0 CH2 event select */ +#define ADC2_EXTTRIG_REGULAR_T7_CH0 CTL1_ETSRC(3) /*!< TIMER7 CH0 event select */ +#define ADC2_EXTTRIG_REGULAR_T7_TRGO CTL1_ETSRC(4) /*!< TIMER7 TRGO event select */ +#define ADC2_EXTTRIG_REGULAR_T4_CH0 CTL1_ETSRC(5) /*!< TIMER4 CH0 event select */ +#define ADC2_EXTTRIG_REGULAR_T4_CH2 CTL1_ETSRC(6) /*!< TIMER4 CH2 event select */ + +/* external trigger mode for inserted channel */ +#define CTL1_ETSIC(regval) (BITS(12,14) & ((uint32_t)(regval) << 12)) /*!< write value to ADC_CTL1_ETSIC bit field */ +/* for ADC0 and ADC1 inserted channel */ +#define ADC0_1_EXTTRIG_INSERTED_T0_TRGO CTL1_ETSIC(0) /*!< TIMER0 TRGO event select */ +#define ADC0_1_EXTTRIG_INSERTED_T0_CH3 CTL1_ETSIC(1) /*!< TIMER0 CH3 event select */ +#define ADC0_1_EXTTRIG_INSERTED_T1_TRGO CTL1_ETSIC(2) /*!< TIMER1 TRGO event select */ +#define ADC0_1_EXTTRIG_INSERTED_T1_CH0 CTL1_ETSIC(3) /*!< TIMER1 CH0 event select */ +#define ADC0_1_EXTTRIG_INSERTED_T2_CH3 CTL1_ETSIC(4) /*!< TIMER2 CH3 event select */ +#define ADC0_1_EXTTRIG_INSERTED_T3_TRGO CTL1_ETSIC(5) /*!< TIMER3 TRGO event select */ +#define ADC0_1_EXTTRIG_INSERTED_EXTI_15 CTL1_ETSIC(6) /*!< external interrupt line 15 */ +#define ADC0_1_EXTTRIG_INSERTED_T7_CH3 CTL1_ETSIC(6) /*!< TIMER7 CH3 event select */ +#define ADC0_1_2_EXTTRIG_INSERTED_NONE CTL1_ETSIC(7) /*!< software trigger */ +/* for ADC2 inserted channel */ +#define ADC2_EXTTRIG_INSERTED_T0_TRGO CTL1_ETSIC(0) /*!< TIMER0 TRGO event select */ +#define ADC2_EXTTRIG_INSERTED_T0_CH3 CTL1_ETSIC(1) /*!< TIMER0 CH3 event select */ +#define ADC2_EXTTRIG_INSERTED_T3_CH2 CTL1_ETSIC(2) /*!< TIMER3 CH2 event select */ +#define ADC2_EXTTRIG_INSERTED_T7_CH1 CTL1_ETSIC(3) /*!< TIMER7 CH1 event select */ +#define ADC2_EXTTRIG_INSERTED_T7_CH3 CTL1_ETSIC(4) /*!< TIMER7 CH3 event select */ +#define ADC2_EXTTRIG_INSERTED_T4_TRGO CTL1_ETSIC(5) /*!< TIMER4 TRGO event select */ +#define ADC2_EXTTRIG_INSERTED_T4_CH3 CTL1_ETSIC(6) /*!< TIMER4 CH3 event select */ + +/* adc_samptx register value */ +#define SAMPTX_SPT(regval) (BITS(0,2) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_SAMPTX_SPT bit field */ +#define ADC_SAMPLETIME_1POINT5 SAMPTX_SPT(0) /*!< 1.5 sampling cycles */ +#define ADC_SAMPLETIME_7POINT5 SAMPTX_SPT(1) /*!< 7.5 sampling cycles */ +#define ADC_SAMPLETIME_13POINT5 SAMPTX_SPT(2) /*!< 13.5 sampling cycles */ +#define ADC_SAMPLETIME_28POINT5 SAMPTX_SPT(3) /*!< 28.5 sampling cycles */ +#define ADC_SAMPLETIME_41POINT5 SAMPTX_SPT(4) /*!< 41.5 sampling cycles */ +#define ADC_SAMPLETIME_55POINT5 SAMPTX_SPT(5) /*!< 55.5 sampling cycles */ +#define ADC_SAMPLETIME_71POINT5 SAMPTX_SPT(6) /*!< 71.5 sampling cycles */ +#define ADC_SAMPLETIME_239POINT5 SAMPTX_SPT(7) /*!< 239.5 sampling cycles */ + +/* adc_ioffx register value */ +#define IOFFX_IOFF(regval) (BITS(0,11) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_IOFFX_IOFF bit field */ + +/* adc_wdht register value */ +#define WDHT_WDHT(regval) (BITS(0,11) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_WDHT_WDHT bit field */ + +/* adc_wdlt register value */ +#define WDLT_WDLT(regval) (BITS(0,11) & ((uint32_t)(regval) << 0)) /*!< write value to ADC_WDLT_WDLT bit field */ + +/* adc_rsqx register value */ +#define RSQ0_RL(regval) (BITS(20,23) & ((uint32_t)(regval) << 20)) /*!< write value to ADC_RSQ0_RL bit field */ + +/* adc_isq register value */ +#define ISQ_IL(regval) (BITS(20,21) & ((uint32_t)(regval) << 20)) /*!< write value to ADC_ISQ_IL bit field */ + +/* ADC channel group definitions */ +#define ADC_REGULAR_CHANNEL ((uint8_t)0x01U) /*!< adc regular channel group */ +#define ADC_INSERTED_CHANNEL ((uint8_t)0x02U) /*!< adc inserted channel group */ +#define ADC_REGULAR_INSERTED_CHANNEL ((uint8_t)0x03U) /*!< both regular and inserted channel group */ + +#define ADC_CHANNEL_DISCON_DISABLE ((uint8_t)0x04U) /*!< disable discontinuous mode of regular & inserted channel */ + +/* ADC inserted channel definitions */ +#define ADC_INSERTED_CHANNEL_0 ((uint8_t)0x00U) /*!< adc inserted channel 0 */ +#define ADC_INSERTED_CHANNEL_1 ((uint8_t)0x01U) /*!< adc inserted channel 1 */ +#define ADC_INSERTED_CHANNEL_2 ((uint8_t)0x02U) /*!< adc inserted channel 2 */ +#define ADC_INSERTED_CHANNEL_3 ((uint8_t)0x03U) /*!< adc inserted channel 3 */ + +/* ADC channel definitions */ +#define ADC_CHANNEL_0 ((uint8_t)0x00U) /*!< ADC channel 0 */ +#define ADC_CHANNEL_1 ((uint8_t)0x01U) /*!< ADC channel 1 */ +#define ADC_CHANNEL_2 ((uint8_t)0x02U) /*!< ADC channel 2 */ +#define ADC_CHANNEL_3 ((uint8_t)0x03U) /*!< ADC channel 3 */ +#define ADC_CHANNEL_4 ((uint8_t)0x04U) /*!< ADC channel 4 */ +#define ADC_CHANNEL_5 ((uint8_t)0x05U) /*!< ADC channel 5 */ +#define ADC_CHANNEL_6 ((uint8_t)0x06U) /*!< ADC channel 6 */ +#define ADC_CHANNEL_7 ((uint8_t)0x07U) /*!< ADC channel 7 */ +#define ADC_CHANNEL_8 ((uint8_t)0x08U) /*!< ADC channel 8 */ +#define ADC_CHANNEL_9 ((uint8_t)0x09U) /*!< ADC channel 9 */ +#define ADC_CHANNEL_10 ((uint8_t)0x0AU) /*!< ADC channel 10 */ +#define ADC_CHANNEL_11 ((uint8_t)0x0BU) /*!< ADC channel 11 */ +#define ADC_CHANNEL_12 ((uint8_t)0x0CU) /*!< ADC channel 12 */ +#define ADC_CHANNEL_13 ((uint8_t)0x0DU) /*!< ADC channel 13 */ +#define ADC_CHANNEL_14 ((uint8_t)0x0EU) /*!< ADC channel 14 */ +#define ADC_CHANNEL_15 ((uint8_t)0x0FU) /*!< ADC channel 15 */ +#define ADC_CHANNEL_16 ((uint8_t)0x10U) /*!< ADC channel 16 */ +#define ADC_CHANNEL_17 ((uint8_t)0x11U) /*!< ADC channel 17 */ + +/* ADC interrupt */ +#define ADC_INT_WDE ADC_STAT_WDE /*!< analog watchdog event interrupt */ +#define ADC_INT_EOC ADC_STAT_EOC /*!< end of group conversion interrupt */ +#define ADC_INT_EOIC ADC_STAT_EOIC /*!< end of inserted group conversion interrupt */ + +/* ADC interrupt flag */ +#define ADC_INT_FLAG_WDE ADC_STAT_WDE /*!< analog watchdog event interrupt flag */ +#define ADC_INT_FLAG_EOC ADC_STAT_EOC /*!< end of group conversion interrupt flag */ +#define ADC_INT_FLAG_EOIC ADC_STAT_EOIC /*!< end of inserted group conversion interrupt flag */ + +/* function declarations */ +/* initialization config */ +/* reset ADC */ +void adc_deinit(uint32_t adc_periph); +/* configure the ADC sync mode */ +void adc_mode_config(uint32_t mode); +/* enable or disable ADC special function */ +void adc_special_function_config(uint32_t adc_periph, uint32_t function, ControlStatus newvalue); +/* configure ADC data alignment */ +void adc_data_alignment_config(uint32_t adc_periph, uint32_t data_alignment); +/* enable ADC interface */ +void adc_enable(uint32_t adc_periph); +/* disable ADC interface */ +void adc_disable(uint32_t adc_periph); +/* ADC calibration and reset calibration */ +void adc_calibration_enable(uint32_t adc_periph); +/* enable the temperature sensor and Vrefint channel */ +void adc_tempsensor_vrefint_enable(void); +/* disable the temperature sensor and Vrefint channel */ +void adc_tempsensor_vrefint_disable(void); + +/* DMA config */ +/* enable DMA request */ +void adc_dma_mode_enable(uint32_t adc_periph); +/* disable DMA request */ +void adc_dma_mode_disable(uint32_t adc_periph); + +/* regular group and inserted group config */ +/* configure ADC discontinuous mode */ +void adc_discontinuous_mode_config(uint32_t adc_periph, uint8_t adc_channel_group, uint8_t length); + +/* configure the length of regular channel group or inserted channel group */ +void adc_channel_length_config(uint32_t adc_periph, uint8_t adc_channel_group, uint32_t length); +/* configure ADC regular channel */ +void adc_regular_channel_config(uint32_t adc_periph, uint8_t rank, uint8_t adc_channel, uint32_t sample_time); +/* configure ADC inserted channel */ +void adc_inserted_channel_config(uint32_t adc_periph, uint8_t rank, uint8_t adc_channel, uint32_t sample_time); +/* configure ADC inserted channel offset */ +void adc_inserted_channel_offset_config(uint32_t adc_periph, uint8_t inserted_channel, uint16_t offset); + +/* configure ADC external trigger source */ +void adc_external_trigger_source_config(uint32_t adc_periph, uint8_t adc_channel_group, uint32_t external_trigger_source); +/* configure ADC external trigger */ +void adc_external_trigger_config(uint32_t adc_periph, uint8_t adc_channel_group, ControlStatus newvalue); +/* enable ADC software trigger */ +void adc_software_trigger_enable(uint32_t adc_periph, uint8_t adc_channel_group); + +/* get channel data */ +/* read ADC regular group data register */ +uint16_t adc_regular_data_read(uint32_t adc_periph); +/* read ADC inserted group data register */ +uint16_t adc_inserted_data_read(uint32_t adc_periph, uint8_t inserted_channel); +/* read the last ADC0 and ADC1 conversion result data in sync mode */ +uint32_t adc_sync_mode_convert_value_read(void); + +/* watchdog config */ +/* configure ADC analog watchdog single channel */ +void adc_watchdog_single_channel_enable(uint32_t adc_periph, uint8_t adc_channel); +/* configure ADC analog watchdog group channel */ +void adc_watchdog_group_channel_enable(uint32_t adc_periph, uint8_t adc_channel_group); +/* disable ADC analog watchdog */ +void adc_watchdog_disable(uint32_t adc_periph); +/* configure ADC analog watchdog threshold */ +void adc_watchdog_threshold_config(uint32_t adc_periph, uint16_t low_threshold, uint16_t high_threshold); + +/* interrupt & flag functions */ +/* get the ADC flag bits */ +FlagStatus adc_flag_get(uint32_t adc_periph, uint32_t adc_flag); +/* clear the ADC flag bits */ +void adc_flag_clear(uint32_t adc_periph, uint32_t adc_flag); +/* get the bit state of ADCx software start conversion */ +FlagStatus adc_regular_software_startconv_flag_get(uint32_t adc_periph); +/* get the bit state of ADCx software inserted channel start conversion */ +FlagStatus adc_inserted_software_startconv_flag_get(uint32_t adc_periph); +/* get the ADC interrupt bits */ +FlagStatus adc_interrupt_flag_get(uint32_t adc_periph, uint32_t adc_interrupt); +/* clear the ADC flag */ +void adc_interrupt_flag_clear(uint32_t adc_periph, uint32_t adc_interrupt); +/* enable ADC interrupt */ +void adc_interrupt_enable(uint32_t adc_periph, uint32_t adc_interrupt); +/* disable ADC interrupt */ +void adc_interrupt_disable(uint32_t adc_periph, uint32_t adc_interrupt); + +#endif /* GD32F10x_ADC_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_bkp.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_bkp.h new file mode 100644 index 0000000000000000000000000000000000000000..73f93252feb461f16d2b746ac0c125eb818f80e9 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_bkp.h @@ -0,0 +1,230 @@ +/*! + \file gd32f10x_bkp.h + \brief definitions for the BKP + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_BKP_H +#define GD32F10X_BKP_H + +#include "gd32f10x.h" + +/* BKP definitions */ +#define BKP BKP_BASE /*!< BKP base address */ + +/* registers definitions */ +#define BKP_DATA0 REG16((BKP) + 0x04U) /*!< BKP data register 0 */ +#define BKP_DATA1 REG16((BKP) + 0x08U) /*!< BKP data register 1 */ +#define BKP_DATA2 REG16((BKP) + 0x0CU) /*!< BKP data register 2 */ +#define BKP_DATA3 REG16((BKP) + 0x10U) /*!< BKP data register 3 */ +#define BKP_DATA4 REG16((BKP) + 0x14U) /*!< BKP data register 4 */ +#define BKP_DATA5 REG16((BKP) + 0x18U) /*!< BKP data register 5 */ +#define BKP_DATA6 REG16((BKP) + 0x1CU) /*!< BKP data register 6 */ +#define BKP_DATA7 REG16((BKP) + 0x20U) /*!< BKP data register 7 */ +#define BKP_DATA8 REG16((BKP) + 0x24U) /*!< BKP data register 8 */ +#define BKP_DATA9 REG16((BKP) + 0x28U) /*!< BKP data register 9 */ +#define BKP_DATA10 REG16((BKP) + 0x40U) /*!< BKP data register 10 */ +#define BKP_DATA11 REG16((BKP) + 0x44U) /*!< BKP data register 11 */ +#define BKP_DATA12 REG16((BKP) + 0x48U) /*!< BKP data register 12 */ +#define BKP_DATA13 REG16((BKP) + 0x4CU) /*!< BKP data register 13 */ +#define BKP_DATA14 REG16((BKP) + 0x50U) /*!< BKP data register 14 */ +#define BKP_DATA15 REG16((BKP) + 0x54U) /*!< BKP data register 15 */ +#define BKP_DATA16 REG16((BKP) + 0x58U) /*!< BKP data register 16 */ +#define BKP_DATA17 REG16((BKP) + 0x5CU) /*!< BKP data register 17 */ +#define BKP_DATA18 REG16((BKP) + 0x60U) /*!< BKP data register 18 */ +#define BKP_DATA19 REG16((BKP) + 0x64U) /*!< BKP data register 19 */ +#define BKP_DATA20 REG16((BKP) + 0x68U) /*!< BKP data register 20 */ +#define BKP_DATA21 REG16((BKP) + 0x6CU) /*!< BKP data register 21 */ +#define BKP_DATA22 REG16((BKP) + 0x70U) /*!< BKP data register 22 */ +#define BKP_DATA23 REG16((BKP) + 0x74U) /*!< BKP data register 23 */ +#define BKP_DATA24 REG16((BKP) + 0x78U) /*!< BKP data register 24 */ +#define BKP_DATA25 REG16((BKP) + 0x7CU) /*!< BKP data register 25 */ +#define BKP_DATA26 REG16((BKP) + 0x80U) /*!< BKP data register 26 */ +#define BKP_DATA27 REG16((BKP) + 0x84U) /*!< BKP data register 27 */ +#define BKP_DATA28 REG16((BKP) + 0x88U) /*!< BKP data register 28 */ +#define BKP_DATA29 REG16((BKP) + 0x8CU) /*!< BKP data register 29 */ +#define BKP_DATA30 REG16((BKP) + 0x90U) /*!< BKP data register 30 */ +#define BKP_DATA31 REG16((BKP) + 0x94U) /*!< BKP data register 31 */ +#define BKP_DATA32 REG16((BKP) + 0x98U) /*!< BKP data register 32 */ +#define BKP_DATA33 REG16((BKP) + 0x9CU) /*!< BKP data register 33 */ +#define BKP_DATA34 REG16((BKP) + 0xA0U) /*!< BKP data register 34 */ +#define BKP_DATA35 REG16((BKP) + 0xA4U) /*!< BKP data register 35 */ +#define BKP_DATA36 REG16((BKP) + 0xA8U) /*!< BKP data register 36 */ +#define BKP_DATA37 REG16((BKP) + 0xACU) /*!< BKP data register 37 */ +#define BKP_DATA38 REG16((BKP) + 0xB0U) /*!< BKP data register 38 */ +#define BKP_DATA39 REG16((BKP) + 0xB4U) /*!< BKP data register 39 */ +#define BKP_DATA40 REG16((BKP) + 0xB8U) /*!< BKP data register 40 */ +#define BKP_DATA41 REG16((BKP) + 0xBCU) /*!< BKP data register 41 */ +#define BKP_OCTL REG16((BKP) + 0x2CU) /*!< RTC signal output control register */ +#define BKP_TPCTL REG16((BKP) + 0x30U) /*!< tamper pin control register */ +#define BKP_TPCS REG16((BKP) + 0x34U) /*!< tamper control and status register */ + +/* bits definitions */ +/* BKP_DATA */ +#define BKP_DATA BITS(0,15) /*!< backup data */ + +/* BKP_OCTL */ +#define BKP_OCTL_RCCV BITS(0,6) /*!< RTC clock calibration value */ +#define BKP_OCTL_COEN BIT(7) /*!< RTC clock calibration output enable */ +#define BKP_OCTL_ASOEN BIT(8) /*!< RTC alarm or second signal output enable */ +#define BKP_OCTL_ROSEL BIT(9) /*!< RTC output selection */ + +/* BKP_TPCTL */ +#define BKP_TPCTL_TPEN BIT(0) /*!< tamper detection enable */ +#define BKP_TPCTL_TPAL BIT(1) /*!< tamper pin active level */ + +/* BKP_TPCS */ +#define BKP_TPCS_TER BIT(0) /*!< tamper event reset */ +#define BKP_TPCS_TIR BIT(1) /*!< tamper interrupt reset */ +#define BKP_TPCS_TPIE BIT(2) /*!< tamper interrupt enable */ +#define BKP_TPCS_TEF BIT(8) /*!< tamper event flag */ +#define BKP_TPCS_TIF BIT(9) /*!< tamper interrupt flag */ + +/* constants definitions */ +/* BKP data register number */ +typedef enum +{ + BKP_DATA_0 = 1, /*!< BKP data register 0 */ + BKP_DATA_1, /*!< BKP data register 1 */ + BKP_DATA_2, /*!< BKP data register 2 */ + BKP_DATA_3, /*!< BKP data register 3 */ + BKP_DATA_4, /*!< BKP data register 4 */ + BKP_DATA_5, /*!< BKP data register 5 */ + BKP_DATA_6, /*!< BKP data register 6 */ + BKP_DATA_7, /*!< BKP data register 7 */ + BKP_DATA_8, /*!< BKP data register 8 */ + BKP_DATA_9, /*!< BKP data register 9 */ + BKP_DATA_10, /*!< BKP data register 10 */ + BKP_DATA_11, /*!< BKP data register 11 */ + BKP_DATA_12, /*!< BKP data register 12 */ + BKP_DATA_13, /*!< BKP data register 13 */ + BKP_DATA_14, /*!< BKP data register 14 */ + BKP_DATA_15, /*!< BKP data register 15 */ + BKP_DATA_16, /*!< BKP data register 16 */ + BKP_DATA_17, /*!< BKP data register 17 */ + BKP_DATA_18, /*!< BKP data register 18 */ + BKP_DATA_19, /*!< BKP data register 19 */ + BKP_DATA_20, /*!< BKP data register 20 */ + BKP_DATA_21, /*!< BKP data register 21 */ + BKP_DATA_22, /*!< BKP data register 22 */ + BKP_DATA_23, /*!< BKP data register 23 */ + BKP_DATA_24, /*!< BKP data register 24 */ + BKP_DATA_25, /*!< BKP data register 25 */ + BKP_DATA_26, /*!< BKP data register 26 */ + BKP_DATA_27, /*!< BKP data register 27 */ + BKP_DATA_28, /*!< BKP data register 28 */ + BKP_DATA_29, /*!< BKP data register 29 */ + BKP_DATA_30, /*!< BKP data register 30 */ + BKP_DATA_31, /*!< BKP data register 31 */ + BKP_DATA_32, /*!< BKP data register 32 */ + BKP_DATA_33, /*!< BKP data register 33 */ + BKP_DATA_34, /*!< BKP data register 34 */ + BKP_DATA_35, /*!< BKP data register 35 */ + BKP_DATA_36, /*!< BKP data register 36 */ + BKP_DATA_37, /*!< BKP data register 37 */ + BKP_DATA_38, /*!< BKP data register 38 */ + BKP_DATA_39, /*!< BKP data register 39 */ + BKP_DATA_40, /*!< BKP data register 40 */ + BKP_DATA_41, /*!< BKP data register 41 */ +}bkp_data_register_enum; + +/* BKP register */ +#define BKP_DATA0_9(number) REG16((BKP) + 0x04U + (number) * 0x04U) +#define BKP_DATA10_41(number) REG16((BKP) + 0x40U + ((number)-10U) * 0x04U) + +/* get data of BKP data register */ +#define BKP_DATA_GET(regval) GET_BITS((uint32_t)(regval), 0, 15) + +/* RTC clock calibration value */ +#define OCTL_RCCV(regval) (BITS(0,6) & ((uint32_t)(regval) << 0)) + +/* RTC output selection */ +#define RTC_OUTPUT_ALARM_PULSE ((uint16_t)0x0000U) /*!< RTC alarm pulse is selected as the RTC output */ +#define RTC_OUTPUT_SECOND_PULSE ((uint16_t)0x0200U) /*!< RTC second pulse is selected as the RTC output */ + +/* tamper pin active level */ +#define TAMPER_PIN_ACTIVE_HIGH ((uint16_t)0x0000U) /*!< the tamper pin is active high */ +#define TAMPER_PIN_ACTIVE_LOW ((uint16_t)0x0002U) /*!< the tamper pin is active low */ + +/* tamper flag */ +#define BKP_FLAG_TAMPER BKP_TPCS_TEF /*!< tamper event flag */ + +/* tamper interrupt flag */ +#define BKP_INT_FLAG_TAMPER BKP_TPCS_TIF /*!< tamper interrupt flag */ +/* function declarations */ +/* reset BKP registers */ +void bkp_deinit(void); +/* write BKP data register */ +void bkp_data_write(bkp_data_register_enum register_number, uint16_t data); +/* read BKP data register */ +uint16_t bkp_data_read(bkp_data_register_enum register_number); + +/* RTC related functions */ +/* enable RTC clock calibration output */ +void bkp_rtc_calibration_output_enable(void); +/* disable RTC clock calibration output */ +void bkp_rtc_calibration_output_disable(void); +/* enable RTC alarm or second signal output */ +void bkp_rtc_signal_output_enable(void); +/* disable RTC alarm or second signal output */ +void bkp_rtc_signal_output_disable(void); +/* select RTC output */ +void bkp_rtc_output_select(uint16_t outputsel); +/* set RTC clock calibration value */ +void bkp_rtc_calibration_value_set(uint8_t value); + +/* tamper pin related functions */ +/* enable tamper pin detection */ +void bkp_tamper_detection_enable(void); +/* disable tamper pin detection */ +void bkp_tamper_detection_disable(void); +/* set tamper pin active level */ +void bkp_tamper_active_level_set(uint16_t level); + +/* interrupt & flag functions */ +/* enable tamper interrupt */ +void bkp_interrupt_enable(void); +/* disable tamper interrupt */ +void bkp_interrupt_disable(void); +/* get tamper flag state */ +FlagStatus bkp_flag_get(void); +/* clear tamper flag state */ +void bkp_flag_clear(void); +/* get tamper interrupt flag state */ +FlagStatus bkp_interrupt_flag_get(void); +/* clear tamper interrupt flag state */ +void bkp_interrupt_flag_clear(void); + +#endif /* GD32F10X_BKP_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_can.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_can.h new file mode 100644 index 0000000000000000000000000000000000000000..0e5ae1f251b78d3f630cf39b334cdd729aed59c4 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_can.h @@ -0,0 +1,725 @@ +/*! + \file gd32f10x_can.h + \brief definitions for the CAN + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10x_CAN_H +#define GD32F10x_CAN_H + +#include "gd32f10x.h" + +/* CAN definitions */ +#define CAN0 CAN_BASE /*!< CAN0 base address */ +#define CAN1 (CAN0 + 0x00000400U) /*!< CAN1 base address */ + +/* registers definitions */ +#define CAN_CTL(canx) REG32((canx) + 0x00U) /*!< CAN control register */ +#define CAN_STAT(canx) REG32((canx) + 0x04U) /*!< CAN status register */ +#define CAN_TSTAT(canx) REG32((canx) + 0x08U) /*!< CAN transmit status register*/ +#define CAN_RFIFO0(canx) REG32((canx) + 0x0CU) /*!< CAN receive FIFO0 register */ +#define CAN_RFIFO1(canx) REG32((canx) + 0x10U) /*!< CAN receive FIFO1 register */ +#define CAN_INTEN(canx) REG32((canx) + 0x14U) /*!< CAN interrupt enable register */ +#define CAN_ERR(canx) REG32((canx) + 0x18U) /*!< CAN error register */ +#define CAN_BT(canx) REG32((canx) + 0x1CU) /*!< CAN bit timing register */ +#define CAN_TMI0(canx) REG32((canx) + 0x180U) /*!< CAN transmit mailbox0 identifier register */ +#define CAN_TMP0(canx) REG32((canx) + 0x184U) /*!< CAN transmit mailbox0 property register */ +#define CAN_TMDATA00(canx) REG32((canx) + 0x188U) /*!< CAN transmit mailbox0 data0 register */ +#define CAN_TMDATA10(canx) REG32((canx) + 0x18CU) /*!< CAN transmit mailbox0 data1 register */ +#define CAN_TMI1(canx) REG32((canx) + 0x190U) /*!< CAN transmit mailbox1 identifier register */ +#define CAN_TMP1(canx) REG32((canx) + 0x194U) /*!< CAN transmit mailbox1 property register */ +#define CAN_TMDATA01(canx) REG32((canx) + 0x198U) /*!< CAN transmit mailbox1 data0 register */ +#define CAN_TMDATA11(canx) REG32((canx) + 0x19CU) /*!< CAN transmit mailbox1 data1 register */ +#define CAN_TMI2(canx) REG32((canx) + 0x1A0U) /*!< CAN transmit mailbox2 identifier register */ +#define CAN_TMP2(canx) REG32((canx) + 0x1A4U) /*!< CAN transmit mailbox2 property register */ +#define CAN_TMDATA02(canx) REG32((canx) + 0x1A8U) /*!< CAN transmit mailbox2 data0 register */ +#define CAN_TMDATA12(canx) REG32((canx) + 0x1ACU) /*!< CAN transmit mailbox2 data1 register */ +#define CAN_RFIFOMI0(canx) REG32((canx) + 0x1B0U) /*!< CAN receive FIFO0 mailbox identifier register */ +#define CAN_RFIFOMP0(canx) REG32((canx) + 0x1B4U) /*!< CAN receive FIFO0 mailbox property register */ +#define CAN_RFIFOMDATA00(canx) REG32((canx) + 0x1B8U) /*!< CAN receive FIFO0 mailbox data0 register */ +#define CAN_RFIFOMDATA10(canx) REG32((canx) + 0x1BCU) /*!< CAN receive FIFO0 mailbox data1 register */ +#define CAN_RFIFOMI1(canx) REG32((canx) + 0x1C0U) /*!< CAN receive FIFO1 mailbox identifier register */ +#define CAN_RFIFOMP1(canx) REG32((canx) + 0x1C4U) /*!< CAN receive FIFO1 mailbox property register */ +#define CAN_RFIFOMDATA01(canx) REG32((canx) + 0x1C8U) /*!< CAN receive FIFO1 mailbox data0 register */ +#define CAN_RFIFOMDATA11(canx) REG32((canx) + 0x1CCU) /*!< CAN receive FIFO1 mailbox data1 register */ +#define CAN_FCTL(canx) REG32((canx) + 0x200U) /*!< CAN filter control register */ +#define CAN_FMCFG(canx) REG32((canx) + 0x204U) /*!< CAN filter mode register */ +#define CAN_FSCFG(canx) REG32((canx) + 0x20CU) /*!< CAN filter scale register */ +#define CAN_FAFIFO(canx) REG32((canx) + 0x214U) /*!< CAN filter associated FIFO register */ +#define CAN_FW(canx) REG32((canx) + 0x21CU) /*!< CAN filter working register */ +#define CAN_F0DATA0(canx) REG32((canx) + 0x240U) /*!< CAN filter 0 data 0 register */ +#define CAN_F1DATA0(canx) REG32((canx) + 0x248U) /*!< CAN filter 1 data 0 register */ +#define CAN_F2DATA0(canx) REG32((canx) + 0x250U) /*!< CAN filter 2 data 0 register */ +#define CAN_F3DATA0(canx) REG32((canx) + 0x258U) /*!< CAN filter 3 data 0 register */ +#define CAN_F4DATA0(canx) REG32((canx) + 0x260U) /*!< CAN filter 4 data 0 register */ +#define CAN_F5DATA0(canx) REG32((canx) + 0x268U) /*!< CAN filter 5 data 0 register */ +#define CAN_F6DATA0(canx) REG32((canx) + 0x270U) /*!< CAN filter 6 data 0 register */ +#define CAN_F7DATA0(canx) REG32((canx) + 0x278U) /*!< CAN filter 7 data 0 register */ +#define CAN_F8DATA0(canx) REG32((canx) + 0x280U) /*!< CAN filter 8 data 0 register */ +#define CAN_F9DATA0(canx) REG32((canx) + 0x288U) /*!< CAN filter 9 data 0 register */ +#define CAN_F10DATA0(canx) REG32((canx) + 0x290U) /*!< CAN filter 10 data 0 register */ +#define CAN_F11DATA0(canx) REG32((canx) + 0x298U) /*!< CAN filter 11 data 0 register */ +#define CAN_F12DATA0(canx) REG32((canx) + 0x2A0U) /*!< CAN filter 12 data 0 register */ +#define CAN_F13DATA0(canx) REG32((canx) + 0x2A8U) /*!< CAN filter 13 data 0 register */ +#define CAN_F14DATA0(canx) REG32((canx) + 0x2B0U) /*!< CAN filter 14 data 0 register */ +#define CAN_F15DATA0(canx) REG32((canx) + 0x2B8U) /*!< CAN filter 15 data 0 register */ +#define CAN_F16DATA0(canx) REG32((canx) + 0x2C0U) /*!< CAN filter 16 data 0 register */ +#define CAN_F17DATA0(canx) REG32((canx) + 0x2C8U) /*!< CAN filter 17 data 0 register */ +#define CAN_F18DATA0(canx) REG32((canx) + 0x2D0U) /*!< CAN filter 18 data 0 register */ +#define CAN_F19DATA0(canx) REG32((canx) + 0x2D8U) /*!< CAN filter 19 data 0 register */ +#define CAN_F20DATA0(canx) REG32((canx) + 0x2E0U) /*!< CAN filter 20 data 0 register */ +#define CAN_F21DATA0(canx) REG32((canx) + 0x2E8U) /*!< CAN filter 21 data 0 register */ +#define CAN_F22DATA0(canx) REG32((canx) + 0x2F0U) /*!< CAN filter 22 data 0 register */ +#define CAN_F23DATA0(canx) REG32((canx) + 0x3F8U) /*!< CAN filter 23 data 0 register */ +#define CAN_F24DATA0(canx) REG32((canx) + 0x300U) /*!< CAN filter 24 data 0 register */ +#define CAN_F25DATA0(canx) REG32((canx) + 0x308U) /*!< CAN filter 25 data 0 register */ +#define CAN_F26DATA0(canx) REG32((canx) + 0x310U) /*!< CAN filter 26 data 0 register */ +#define CAN_F27DATA0(canx) REG32((canx) + 0x318U) /*!< CAN filter 27 data 0 register */ +#define CAN_F0DATA1(canx) REG32((canx) + 0x244U) /*!< CAN filter 0 data 1 register */ +#define CAN_F1DATA1(canx) REG32((canx) + 0x24CU) /*!< CAN filter 1 data 1 register */ +#define CAN_F2DATA1(canx) REG32((canx) + 0x254U) /*!< CAN filter 2 data 1 register */ +#define CAN_F3DATA1(canx) REG32((canx) + 0x25CU) /*!< CAN filter 3 data 1 register */ +#define CAN_F4DATA1(canx) REG32((canx) + 0x264U) /*!< CAN filter 4 data 1 register */ +#define CAN_F5DATA1(canx) REG32((canx) + 0x26CU) /*!< CAN filter 5 data 1 register */ +#define CAN_F6DATA1(canx) REG32((canx) + 0x274U) /*!< CAN filter 6 data 1 register */ +#define CAN_F7DATA1(canx) REG32((canx) + 0x27CU) /*!< CAN filter 7 data 1 register */ +#define CAN_F8DATA1(canx) REG32((canx) + 0x284U) /*!< CAN filter 8 data 1 register */ +#define CAN_F9DATA1(canx) REG32((canx) + 0x28CU) /*!< CAN filter 9 data 1 register */ +#define CAN_F10DATA1(canx) REG32((canx) + 0x294U) /*!< CAN filter 10 data 1 register */ +#define CAN_F11DATA1(canx) REG32((canx) + 0x29CU) /*!< CAN filter 11 data 1 register */ +#define CAN_F12DATA1(canx) REG32((canx) + 0x2A4U) /*!< CAN filter 12 data 1 register */ +#define CAN_F13DATA1(canx) REG32((canx) + 0x2ACU) /*!< CAN filter 13 data 1 register */ +#define CAN_F14DATA1(canx) REG32((canx) + 0x2B4U) /*!< CAN filter 14 data 1 register */ +#define CAN_F15DATA1(canx) REG32((canx) + 0x2BCU) /*!< CAN filter 15 data 1 register */ +#define CAN_F16DATA1(canx) REG32((canx) + 0x2C4U) /*!< CAN filter 16 data 1 register */ +#define CAN_F17DATA1(canx) REG32((canx) + 0x24CU) /*!< CAN filter 17 data 1 register */ +#define CAN_F18DATA1(canx) REG32((canx) + 0x2D4U) /*!< CAN filter 18 data 1 register */ +#define CAN_F19DATA1(canx) REG32((canx) + 0x2DCU) /*!< CAN filter 19 data 1 register */ +#define CAN_F20DATA1(canx) REG32((canx) + 0x2E4U) /*!< CAN filter 20 data 1 register */ +#define CAN_F21DATA1(canx) REG32((canx) + 0x2ECU) /*!< CAN filter 21 data 1 register */ +#define CAN_F22DATA1(canx) REG32((canx) + 0x2F4U) /*!< CAN filter 22 data 1 register */ +#define CAN_F23DATA1(canx) REG32((canx) + 0x2FCU) /*!< CAN filter 23 data 1 register */ +#define CAN_F24DATA1(canx) REG32((canx) + 0x304U) /*!< CAN filter 24 data 1 register */ +#define CAN_F25DATA1(canx) REG32((canx) + 0x30CU) /*!< CAN filter 25 data 1 register */ +#define CAN_F26DATA1(canx) REG32((canx) + 0x314U) /*!< CAN filter 26 data 1 register */ +#define CAN_F27DATA1(canx) REG32((canx) + 0x31CU) /*!< CAN filter 27 data 1 register */ + +/* CAN transmit mailbox bank */ +#define CAN_TMI(canx, bank) REG32((canx) + 0x180U + ((bank) * 0x10U)) /*!< CAN transmit mailbox identifier register */ +#define CAN_TMP(canx, bank) REG32((canx) + 0x184U + ((bank) * 0x10U)) /*!< CAN transmit mailbox property register */ +#define CAN_TMDATA0(canx, bank) REG32((canx) + 0x188U + ((bank) * 0x10U)) /*!< CAN transmit mailbox data0 register */ +#define CAN_TMDATA1(canx, bank) REG32((canx) + 0x18CU + ((bank) * 0x10U)) /*!< CAN transmit mailbox data1 register */ + +/* CAN filter bank */ +#define CAN_FDATA0(canx, bank) REG32((canx) + 0x240U + ((bank) * 0x8U) + 0x0U) /*!< CAN filter data 0 register */ +#define CAN_FDATA1(canx, bank) REG32((canx) + 0x240U + ((bank) * 0x8U) + 0x4U) /*!< CAN filter data 1 register */ + +/* CAN receive fifo mailbox bank */ +#define CAN_RFIFOMI(canx, bank) REG32((canx) + 0x1B0U + ((bank) * 0x10U)) /*!< CAN receive FIFO mailbox identifier register */ +#define CAN_RFIFOMP(canx, bank) REG32((canx) + 0x1B4U + ((bank) * 0x10U)) /*!< CAN receive FIFO mailbox property register */ +#define CAN_RFIFOMDATA0(canx, bank) REG32((canx) + 0x1B8U + ((bank) * 0x10U)) /*!< CAN receive FIFO mailbox data0 register */ +#define CAN_RFIFOMDATA1(canx, bank) REG32((canx) + 0x1BCU + ((bank) * 0x10U)) /*!< CAN receive FIFO mailbox data1 register */ + +/* bits definitions */ +/* CAN_CTL */ +#define CAN_CTL_IWMOD BIT(0) /*!< initial working mode */ +#define CAN_CTL_SLPWMOD BIT(1) /*!< sleep working mode */ +#define CAN_CTL_TFO BIT(2) /*!< transmit FIFO order */ +#define CAN_CTL_RFOD BIT(3) /*!< receive FIFO overwrite disable */ +#define CAN_CTL_ARD BIT(4) /*!< automatic retransmission disable */ +#define CAN_CTL_AWU BIT(5) /*!< automatic wakeup */ +#define CAN_CTL_ABOR BIT(6) /*!< automatic bus-off recovery */ +#define CAN_CTL_TTC BIT(7) /*!< time triggered communication */ +#define CAN_CTL_SWRST BIT(15) /*!< CAN software reset */ +#define CAN_CTL_DFZ BIT(16) /*!< CAN debug freeze */ + +/* CAN_STAT */ +#define CAN_STAT_IWS BIT(0) /*!< initial working state */ +#define CAN_STAT_SLPWS BIT(1) /*!< sleep working state */ +#define CAN_STAT_ERRIF BIT(2) /*!< error interrupt flag*/ +#define CAN_STAT_WUIF BIT(3) /*!< status change interrupt flag of wakeup from sleep working mode */ +#define CAN_STAT_SLPIF BIT(4) /*!< status change interrupt flag of sleep working mode entering */ +#define CAN_STAT_TS BIT(8) /*!< transmitting state */ +#define CAN_STAT_RS BIT(9) /*!< receiving state */ +#define CAN_STAT_LASTRX BIT(10) /*!< last sample value of rx pin */ +#define CAN_STAT_RXL BIT(11) /*!< CAN rx signal */ + +/* CAN_TSTAT */ +#define CAN_TSTAT_MTF0 BIT(0) /*!< mailbox0 transmit finished */ +#define CAN_TSTAT_MTFNERR0 BIT(1) /*!< mailbox0 transmit finished and no error */ +#define CAN_TSTAT_MAL0 BIT(2) /*!< mailbox0 arbitration lost */ +#define CAN_TSTAT_MTE0 BIT(3) /*!< mailbox0 transmit error */ +#define CAN_TSTAT_MST0 BIT(7) /*!< mailbox0 stop transmitting */ +#define CAN_TSTAT_MTF1 BIT(8) /*!< mailbox1 transmit finished */ +#define CAN_TSTAT_MTFNERR1 BIT(9) /*!< mailbox1 transmit finished and no error */ +#define CAN_TSTAT_MAL1 BIT(10) /*!< mailbox1 arbitration lost */ +#define CAN_TSTAT_MTE1 BIT(11) /*!< mailbox1 transmit error */ +#define CAN_TSTAT_MST1 BIT(15) /*!< mailbox1 stop transmitting */ +#define CAN_TSTAT_MTF2 BIT(16) /*!< mailbox2 transmit finished */ +#define CAN_TSTAT_MTFNERR2 BIT(17) /*!< mailbox2 transmit finished and no error */ +#define CAN_TSTAT_MAL2 BIT(18) /*!< mailbox2 arbitration lost */ +#define CAN_TSTAT_MTE2 BIT(19) /*!< mailbox2 transmit error */ +#define CAN_TSTAT_MST2 BIT(23) /*!< mailbox2 stop transmitting */ +#define CAN_TSTAT_NUM BITS(24,25) /*!< mailbox number */ +#define CAN_TSTAT_TME0 BIT(26) /*!< transmit mailbox0 empty */ +#define CAN_TSTAT_TME1 BIT(27) /*!< transmit mailbox1 empty */ +#define CAN_TSTAT_TME2 BIT(28) /*!< transmit mailbox2 empty */ +#define CAN_TSTAT_TMLS0 BIT(29) /*!< last sending priority flag for mailbox0 */ +#define CAN_TSTAT_TMLS1 BIT(30) /*!< last sending priority flag for mailbox1 */ +#define CAN_TSTAT_TMLS2 BIT(31) /*!< last sending priority flag for mailbox2 */ + +/* CAN_RFIFO0 */ +#define CAN_RFIFO0_RFL0 BITS(0,1) /*!< receive FIFO0 length */ +#define CAN_RFIFO0_RFF0 BIT(3) /*!< receive FIFO0 full */ +#define CAN_RFIFO0_RFO0 BIT(4) /*!< receive FIFO0 overfull */ +#define CAN_RFIFO0_RFD0 BIT(5) /*!< receive FIFO0 dequeue */ + +/* CAN_RFIFO1 */ +#define CAN_RFIFO1_RFL1 BITS(0,1) /*!< receive FIFO1 length */ +#define CAN_RFIFO1_RFF1 BIT(3) /*!< receive FIFO1 full */ +#define CAN_RFIFO1_RFO1 BIT(4) /*!< receive FIFO1 overfull */ +#define CAN_RFIFO1_RFD1 BIT(5) /*!< receive FIFO1 dequeue */ + +/* CAN_INTEN */ +#define CAN_INTEN_TMEIE BIT(0) /*!< transmit mailbox empty interrupt enable */ +#define CAN_INTEN_RFNEIE0 BIT(1) /*!< receive FIFO0 not empty interrupt enable */ +#define CAN_INTEN_RFFIE0 BIT(2) /*!< receive FIFO0 full interrupt enable */ +#define CAN_INTEN_RFOIE0 BIT(3) /*!< receive FIFO0 overfull interrupt enable */ +#define CAN_INTEN_RFNEIE1 BIT(4) /*!< receive FIFO1 not empty interrupt enable */ +#define CAN_INTEN_RFFIE1 BIT(5) /*!< receive FIFO1 full interrupt enable */ +#define CAN_INTEN_RFOIE1 BIT(6) /*!< receive FIFO1 overfull interrupt enable */ +#define CAN_INTEN_WERRIE BIT(8) /*!< warning error interrupt enable */ +#define CAN_INTEN_PERRIE BIT(9) /*!< passive error interrupt enable */ +#define CAN_INTEN_BOIE BIT(10) /*!< bus-off interrupt enable */ +#define CAN_INTEN_ERRNIE BIT(11) /*!< error number interrupt enable */ +#define CAN_INTEN_ERRIE BIT(15) /*!< error interrupt enable */ +#define CAN_INTEN_WIE BIT(16) /*!< wakeup interrupt enable */ +#define CAN_INTEN_SLPWIE BIT(17) /*!< sleep working interrupt enable */ + +/* CAN_ERR */ +#define CAN_ERR_WERR BIT(0) /*!< warning error */ +#define CAN_ERR_PERR BIT(1) /*!< passive error */ +#define CAN_ERR_BOERR BIT(2) /*!< bus-off error */ +#define CAN_ERR_ERRN BITS(4,6) /*!< error number */ +#define CAN_ERR_TECNT BITS(16,23) /*!< transmit error count */ +#define CAN_ERR_RECNT BITS(24,31) /*!< receive error count */ + +/* CAN_BT */ +#define CAN_BT_BAUDPSC BITS(0,9) /*!< baudrate prescaler */ +#define CAN_BT_BS1 BITS(16,19) /*!< bit segment 1 */ +#define CAN_BT_BS2 BITS(20,22) /*!< bit segment 2 */ +#define CAN_BT_SJW BITS(24,25) /*!< resynchronization jump width */ +#define CAN_BT_LCMOD BIT(30) /*!< loopback communication mode */ +#define CAN_BT_SCMOD BIT(31) /*!< silent communication mode */ + +/* CAN_TMIx */ +#define CAN_TMI_TEN BIT(0) /*!< transmit enable */ +#define CAN_TMI_FT BIT(1) /*!< frame type */ +#define CAN_TMI_FF BIT(2) /*!< frame format */ +#define CAN_TMI_EFID BITS(3,31) /*!< the frame identifier */ +#define CAN_TMI_SFID BITS(21,31) /*!< the frame identifier */ + +/* CAN_TMPx */ +#define CAN_TMP_DLENC BITS(0,3) /*!< data length code */ +#define CAN_TMP_TSEN BIT(8) /*!< time stamp enable */ +#define CAN_TMP_TS BITS(16,31) /*!< time stamp */ + +/* CAN_TMDATA0x */ +#define CAN_TMDATA0_DB0 BITS(0,7) /*!< transmit data byte 0 */ +#define CAN_TMDATA0_DB1 BITS(8,15) /*!< transmit data byte 1 */ +#define CAN_TMDATA0_DB2 BITS(16,23) /*!< transmit data byte 2 */ +#define CAN_TMDATA0_DB3 BITS(24,31) /*!< transmit data byte 3 */ + +/* CAN_TMDATA1x */ +#define CAN_TMDATA1_DB4 BITS(0,7) /*!< transmit data byte 4 */ +#define CAN_TMDATA1_DB5 BITS(8,15) /*!< transmit data byte 5 */ +#define CAN_TMDATA1_DB6 BITS(16,23) /*!< transmit data byte 6 */ +#define CAN_TMDATA1_DB7 BITS(24,31) /*!< transmit data byte 7 */ + +/* CAN_RFIFOMIx */ +#define CAN_RFIFOMI_FT BIT(1) /*!< frame type */ +#define CAN_RFIFOMI_FF BIT(2) /*!< frame format */ +#define CAN_RFIFOMI_EFID BITS(3,31) /*!< the frame identifier */ +#define CAN_RFIFOMI_SFID BITS(21,31) /*!< the frame identifier */ + +/* CAN_RFIFOMPx */ +#define CAN_RFIFOMP_DLENC BITS(0,3) /*!< receive data length code */ +#define CAN_RFIFOMP_FI BITS(8,15) /*!< filter index */ +#define CAN_RFIFOMP_TS BITS(16,31) /*!< time stamp */ + +/* CAN_RFIFOMDATA0x */ +#define CAN_RFIFOMDATA0_DB0 BITS(0,7) /*!< receive data byte 0 */ +#define CAN_RFIFOMDATA0_DB1 BITS(8,15) /*!< receive data byte 1 */ +#define CAN_RFIFOMDATA0_DB2 BITS(16,23) /*!< receive data byte 2 */ +#define CAN_RFIFOMDATA0_DB3 BITS(24,31) /*!< receive data byte 3 */ + +/* CAN_RFIFOMDATA1x */ +#define CAN_RFIFOMDATA1_DB4 BITS(0,7) /*!< receive data byte 4 */ +#define CAN_RFIFOMDATA1_DB5 BITS(8,15) /*!< receive data byte 5 */ +#define CAN_RFIFOMDATA1_DB6 BITS(16,23) /*!< receive data byte 6 */ +#define CAN_RFIFOMDATA1_DB7 BITS(24,31) /*!< receive data byte 7 */ + +/* CAN_FCTL */ +#define CAN_FCTL_FLD BIT(0) /*!< filter lock disable */ +#define CAN_FCTL_HBC1F BITS(8,13) /*!< header bank of CAN1 filter */ + +/* CAN_FMCFG */ +#define CAN_FMCFG_FMOD(regval) BIT(regval) /*!< filter mode, list or mask*/ + +/* CAN_FSCFG */ +#define CAN_FSCFG_FS(regval) BIT(regval) /*!< filter scale, 32 bits or 16 bits*/ + +/* CAN_FAFIFO */ +#define CAN_FAFIFOR_FAF(regval) BIT(regval) /*!< filter associated with FIFO */ + +/* CAN_FW */ +#define CAN_FW_FW(regval) BIT(regval) /*!< filter working */ + +/* CAN_FxDATAy */ +#define CAN_FDATA_FD(regval) BIT(regval) /*!< filter data */ + +/* consts definitions */ +/* define the CAN bit position and its register index offset */ +#define CAN_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)) +#define CAN_REG_VAL(canx, offset) (REG32((canx) + ((uint32_t)(offset) >> 6))) +#define CAN_BIT_POS(val) ((uint32_t)(val) & 0x1FU) + +#define CAN_REGIDX_BITS(regidx, bitpos0, bitpos1) (((uint32_t)(regidx) << 12) | ((uint32_t)(bitpos0) << 6) | (uint32_t)(bitpos1)) +#define CAN_REG_VALS(canx, offset) (REG32((canx) + ((uint32_t)(offset) >> 12))) +#define CAN_BIT_POS0(val) (((uint32_t)(val) >> 6) & 0x1FU) +#define CAN_BIT_POS1(val) ((uint32_t)(val) & 0x1FU) + +/* register offset */ +#define STAT_REG_OFFSET ((uint8_t)0x04U) /*!< STAT register offset */ +#define TSTAT_REG_OFFSET ((uint8_t)0x08U) /*!< TSTAT register offset */ +#define RFIFO0_REG_OFFSET ((uint8_t)0x0CU) /*!< RFIFO0 register offset */ +#define RFIFO1_REG_OFFSET ((uint8_t)0x10U) /*!< RFIFO1 register offset */ +#define ERR_REG_OFFSET ((uint8_t)0x18U) /*!< ERR register offset */ + +/* CAN flags */ +typedef enum +{ + /* flags in TSTAT register */ + CAN_FLAG_MTE2 = CAN_REGIDX_BIT(TSTAT_REG_OFFSET, 19U), /*!< mailbox 2 transmit error */ + CAN_FLAG_MTE1 = CAN_REGIDX_BIT(TSTAT_REG_OFFSET, 11U), /*!< mailbox 1 transmit error */ + CAN_FLAG_MTE0 = CAN_REGIDX_BIT(TSTAT_REG_OFFSET, 3U), /*!< mailbox 0 transmit error */ + CAN_FLAG_MTF2 = CAN_REGIDX_BIT(TSTAT_REG_OFFSET, 16U), /*!< mailbox 2 transmit finished */ + CAN_FLAG_MTF1 = CAN_REGIDX_BIT(TSTAT_REG_OFFSET, 8U), /*!< mailbox 1 transmit finished */ + CAN_FLAG_MTF0 = CAN_REGIDX_BIT(TSTAT_REG_OFFSET, 0U), /*!< mailbox 0 transmit finished */ + /* flags in RFIFO0 register */ + CAN_FLAG_RFO0 = CAN_REGIDX_BIT(RFIFO0_REG_OFFSET, 4U), /*!< receive FIFO0 overfull */ + CAN_FLAG_RFF0 = CAN_REGIDX_BIT(RFIFO0_REG_OFFSET, 3U), /*!< receive FIFO0 full */ + /* flags in RFIFO1 register */ + CAN_FLAG_RFO1 = CAN_REGIDX_BIT(RFIFO1_REG_OFFSET, 4U), /*!< receive FIFO1 overfull */ + CAN_FLAG_RFF1 = CAN_REGIDX_BIT(RFIFO1_REG_OFFSET, 3U), /*!< receive FIFO1 full */ + /* flags in ERR register */ + CAN_FLAG_BOERR = CAN_REGIDX_BIT(ERR_REG_OFFSET, 2U), /*!< bus-off error */ + CAN_FLAG_PERR = CAN_REGIDX_BIT(ERR_REG_OFFSET, 1U), /*!< passive error */ + CAN_FLAG_WERR = CAN_REGIDX_BIT(ERR_REG_OFFSET, 0U), /*!< warning error */ +}can_flag_enum; + +/* CAN interrupt flags */ +typedef enum +{ + /* interrupt flags in STAT register */ + CAN_INT_FLAG_SLPIF = CAN_REGIDX_BITS(STAT_REG_OFFSET, 4U, 17U), /*!< status change interrupt flag of sleep working mode entering */ + CAN_INT_FLAG_WUIF = CAN_REGIDX_BITS(STAT_REG_OFFSET, 3U, 16), /*!< status change interrupt flag of wakeup from sleep working mode */ + CAN_INT_FLAG_ERRIF = CAN_REGIDX_BITS(STAT_REG_OFFSET, 2U, 15), /*!< error interrupt flag */ + /* interrupt flags in TSTAT register */ + CAN_INT_FLAG_MTF2 = CAN_REGIDX_BITS(TSTAT_REG_OFFSET, 16U, 0U), /*!< mailbox 2 transmit finished interrupt flag */ + CAN_INT_FLAG_MTF1 = CAN_REGIDX_BITS(TSTAT_REG_OFFSET, 8U, 0U), /*!< mailbox 1 transmit finished interrupt flag */ + CAN_INT_FLAG_MTF0 = CAN_REGIDX_BITS(TSTAT_REG_OFFSET, 0U, 0U), /*!< mailbox 0 transmit finished interrupt flag */ + /* interrupt flags in RFIFO0 register */ + CAN_INT_FLAG_RFO0 = CAN_REGIDX_BITS(RFIFO0_REG_OFFSET, 4U, 3U), /*!< receive FIFO0 overfull interrupt flag */ + CAN_INT_FLAG_RFF0 = CAN_REGIDX_BITS(RFIFO0_REG_OFFSET, 3U, 2U), /*!< receive FIFO0 full interrupt flag */ + /* interrupt flags in RFIFO0 register */ + CAN_INT_FLAG_RFO1 = CAN_REGIDX_BITS(RFIFO1_REG_OFFSET, 4U, 6U), /*!< receive FIFO1 overfull interrupt flag */ + CAN_INT_FLAG_RFF1 = CAN_REGIDX_BITS(RFIFO1_REG_OFFSET, 3U, 5U), /*!< receive FIFO1 full interrupt flag */ +}can_interrupt_flag_enum; + +/* CAN initiliaze parameters struct */ +typedef struct +{ + uint8_t working_mode; /*!< CAN working mode */ + uint8_t resync_jump_width; /*!< CAN resynchronization jump width */ + uint8_t time_segment_1; /*!< time segment 1 */ + uint8_t time_segment_2; /*!< time segment 2 */ + ControlStatus time_triggered; /*!< time triggered communication mode */ + ControlStatus auto_bus_off_recovery; /*!< automatic bus-off recovery */ + ControlStatus auto_wake_up; /*!< automatic wake-up mode */ + ControlStatus auto_retrans; /*!< automatic retransmission mode disable */ + ControlStatus rec_fifo_overwrite; /*!< receive FIFO overwrite mode */ + ControlStatus trans_fifo_order; /*!< transmit FIFO order */ + uint16_t prescaler; /*!< baudrate prescaler */ +}can_parameter_struct; + +/* CAN transmit message struct */ +typedef struct +{ + uint32_t tx_sfid; /*!< standard format frame identifier */ + uint32_t tx_efid; /*!< extended format frame identifier */ + uint8_t tx_ff; /*!< format of frame, standard or extended format */ + uint8_t tx_ft; /*!< type of frame, data or remote */ + uint8_t tx_dlen; /*!< data length */ + uint8_t tx_data[8]; /*!< transmit data */ +}can_trasnmit_message_struct; + +/* CAN receive message struct */ +typedef struct +{ + uint32_t rx_sfid; /*!< standard format frame identifier */ + uint32_t rx_efid; /*!< extended format frame identifier */ + uint8_t rx_ff; /*!< format of frame, standard or extended format */ + uint8_t rx_ft; /*!< type of frame, data or remote */ + uint8_t rx_dlen; /*!< data length */ + uint8_t rx_data[8]; /*!< receive data */ + uint8_t rx_fi; /*!< filtering index */ +} can_receive_message_struct; + +/* CAN filter parameters struct */ +typedef struct +{ + uint16_t filter_list_high; /*!< filter list number high bits*/ + uint16_t filter_list_low; /*!< filter list number low bits */ + uint16_t filter_mask_high; /*!< filter mask number high bits */ + uint16_t filter_mask_low; /*!< filter mask number low bits */ + uint16_t filter_fifo_number; /*!< receive FIFO associated with the filter */ + uint16_t filter_number; /*!< filter number */ + uint16_t filter_mode; /*!< filter mode, list or mask */ + uint16_t filter_bits; /*!< filter scale */ + ControlStatus filter_enable; /*!< filter work or not */ +}can_filter_parameter_struct; + +/* CAN errors */ +typedef enum +{ + CAN_ERROR_NONE = 0, /*!< no error */ + CAN_ERROR_FILL, /*!< fill error */ + CAN_ERROR_FORMATE, /*!< format error */ + CAN_ERROR_ACK, /*!< ACK error */ + CAN_ERROR_BITRECESSIVE, /*!< bit recessive error */ + CAN_ERROR_BITDOMINANTER, /*!< bit dominant error */ + CAN_ERROR_CRC, /*!< CRC error */ + CAN_ERROR_SOFTWARECFG, /*!< software configure */ +}can_error_enum; + +/* transmit states */ +typedef enum +{ + CAN_TRANSMIT_FAILED = 0, /*!< CAN transmitted failure */ + CAN_TRANSMIT_OK = 1, /*!< CAN transmitted success */ + CAN_TRANSMIT_PENDING = 2, /*!< CAN transmitted pending */ + CAN_TRANSMIT_NOMAILBOX = 4, /*!< no empty mailbox to be used for CAN */ +}can_transmit_state_enum; + +typedef enum +{ + CAN_INIT_STRUCT = 0, /* CAN initiliaze parameters struct */ + CAN_FILTER_STRUCT, /* CAN filter parameters struct */ + CAN_TX_MESSAGE_STRUCT, /* CAN transmit message struct */ + CAN_RX_MESSAGE_STRUCT, /* CAN receive message struct */ +}can_struct_type_enum; + +/* CAN baudrate prescaler*/ +#define BT_BAUDPSC(regval) (BITS(0,9) & ((uint32_t)(regval) << 0)) + +/* CAN bit segment 1*/ +#define BT_BS1(regval) (BITS(16,19) & ((uint32_t)(regval) << 16)) + +/* CAN bit segment 2*/ +#define BT_BS2(regval) (BITS(20,22) & ((uint32_t)(regval) << 20)) + +/* CAN resynchronization jump width*/ +#define BT_SJW(regval) (BITS(24,25) & ((uint32_t)(regval) << 24)) + +/* CAN communication mode*/ +#define BT_MODE(regval) (BITS(30,31) & ((uint32_t)(regval) << 30)) + +/* CAN FDATA high 16 bits */ +#define FDATA_MASK_HIGH(regval) (BITS(16,31) & ((uint32_t)(regval) << 16)) + +/* CAN FDATA low 16 bits */ +#define FDATA_MASK_LOW(regval) (BITS(0,15) & ((uint32_t)(regval) << 0)) + +/* CAN1 filter start bank_number*/ +#define FCTL_HBC1F(regval) (BITS(8,13) & ((uint32_t)(regval) << 8)) + +/* CAN transmit mailbox extended identifier*/ +#define TMI_EFID(regval) (BITS(3,31) & ((uint32_t)(regval) << 3)) + +/* CAN transmit mailbox standard identifier*/ +#define TMI_SFID(regval) (BITS(21,31) & ((uint32_t)(regval) << 21)) + +/* transmit data byte 0 */ +#define TMDATA0_DB0(regval) (BITS(0,7) & ((uint32_t)(regval) << 0)) + +/* transmit data byte 1 */ +#define TMDATA0_DB1(regval) (BITS(8,15) & ((uint32_t)(regval) << 8)) + +/* transmit data byte 2 */ +#define TMDATA0_DB2(regval) (BITS(16,23) & ((uint32_t)(regval) << 16)) + +/* transmit data byte 3 */ +#define TMDATA0_DB3(regval) (BITS(24,31) & ((uint32_t)(regval) << 24)) + +/* transmit data byte 4 */ +#define TMDATA1_DB4(regval) (BITS(0,7) & ((uint32_t)(regval) << 0)) + +/* transmit data byte 5 */ +#define TMDATA1_DB5(regval) (BITS(8,15) & ((uint32_t)(regval) << 8)) + +/* transmit data byte 6 */ +#define TMDATA1_DB6(regval) (BITS(16,23) & ((uint32_t)(regval) << 16)) + +/* transmit data byte 7 */ +#define TMDATA1_DB7(regval) (BITS(24,31) & ((uint32_t)(regval) << 24)) + +/* receive mailbox extended identifier*/ +#define GET_RFIFOMI_EFID(regval) GET_BITS((uint32_t)(regval), 3, 31) + +/* receive mailbox standrad identifier*/ +#define GET_RFIFOMI_SFID(regval) GET_BITS((uint32_t)(regval), 21, 31) + +/* receive data length */ +#define GET_RFIFOMP_DLENC(regval) GET_BITS((uint32_t)(regval), 0, 3) + +/* the index of the filter by which the frame is passed */ +#define GET_RFIFOMP_FI(regval) GET_BITS((uint32_t)(regval), 8, 15) + +/* receive data byte 0 */ +#define GET_RFIFOMDATA0_DB0(regval) GET_BITS((uint32_t)(regval), 0, 7) + +/* receive data byte 1 */ +#define GET_RFIFOMDATA0_DB1(regval) GET_BITS((uint32_t)(regval), 8, 15) + +/* receive data byte 2 */ +#define GET_RFIFOMDATA0_DB2(regval) GET_BITS((uint32_t)(regval), 16, 23) + +/* receive data byte 3 */ +#define GET_RFIFOMDATA0_DB3(regval) GET_BITS((uint32_t)(regval), 24, 31) + +/* receive data byte 4 */ +#define GET_RFIFOMDATA1_DB4(regval) GET_BITS((uint32_t)(regval), 0, 7) + +/* receive data byte 5 */ +#define GET_RFIFOMDATA1_DB5(regval) GET_BITS((uint32_t)(regval), 8, 15) + +/* receive data byte 6 */ +#define GET_RFIFOMDATA1_DB6(regval) GET_BITS((uint32_t)(regval), 16, 23) + +/* receive data byte 7 */ +#define GET_RFIFOMDATA1_DB7(regval) GET_BITS((uint32_t)(regval), 24, 31) + +/* error number */ +#define GET_ERR_ERRN(regval) GET_BITS((uint32_t)(regval), 4, 6) + +/* transmit error count */ +#define GET_ERR_TECNT(regval) GET_BITS((uint32_t)(regval), 16, 23) + +/* receive error count */ +#define GET_ERR_RECNT(regval) GET_BITS((uint32_t)(regval), 24, 31) + +/* CAN errors */ +#define ERR_ERRN(regval) (BITS(4,6) & ((uint32_t)(regval) << 4)) +#define CAN_ERRN_0 ERR_ERRN(0) /* no error */ +#define CAN_ERRN_1 ERR_ERRN(1) /*!< fill error */ +#define CAN_ERRN_2 ERR_ERRN(2) /*!< format error */ +#define CAN_ERRN_3 ERR_ERRN(3) /*!< ACK error */ +#define CAN_ERRN_4 ERR_ERRN(4) /*!< bit recessive error */ +#define CAN_ERRN_5 ERR_ERRN(5) /*!< bit dominant error */ +#define CAN_ERRN_6 ERR_ERRN(6) /*!< CRC error */ +#define CAN_ERRN_7 ERR_ERRN(7) /*!< software error */ + +#define CAN_STATE_PENDING ((uint32_t)0x00000000U) /*!< CAN pending */ + +/* CAN communication mode */ +#define CAN_NORMAL_MODE ((uint8_t)0x00U) /*!< normal communication mode */ +#define CAN_LOOPBACK_MODE ((uint8_t)0x01U) /*!< loopback communication mode */ +#define CAN_SILENT_MODE ((uint8_t)0x02U) /*!< silent communication mode */ +#define CAN_SILENT_LOOPBACK_MODE ((uint8_t)0x03U) /*!< loopback and silent communication mode */ + +/* CAN resynchronisation jump width */ +#define CAN_BT_SJW_1TQ ((uint8_t)0x00U) /*!< 1 time quanta */ +#define CAN_BT_SJW_2TQ ((uint8_t)0x01U) /*!< 2 time quanta */ +#define CAN_BT_SJW_3TQ ((uint8_t)0x02U) /*!< 3 time quanta */ +#define CAN_BT_SJW_4TQ ((uint8_t)0x03U) /*!< 4 time quanta */ + +/* CAN time segment 1 */ +#define CAN_BT_BS1_1TQ ((uint8_t)0x00U) /*!< 1 time quanta */ +#define CAN_BT_BS1_2TQ ((uint8_t)0x01U) /*!< 2 time quanta */ +#define CAN_BT_BS1_3TQ ((uint8_t)0x02U) /*!< 3 time quanta */ +#define CAN_BT_BS1_4TQ ((uint8_t)0x03U) /*!< 4 time quanta */ +#define CAN_BT_BS1_5TQ ((uint8_t)0x04U) /*!< 5 time quanta */ +#define CAN_BT_BS1_6TQ ((uint8_t)0x05U) /*!< 6 time quanta */ +#define CAN_BT_BS1_7TQ ((uint8_t)0x06U) /*!< 7 time quanta */ +#define CAN_BT_BS1_8TQ ((uint8_t)0x07U) /*!< 8 time quanta */ +#define CAN_BT_BS1_9TQ ((uint8_t)0x08U) /*!< 9 time quanta */ +#define CAN_BT_BS1_10TQ ((uint8_t)0x09U) /*!< 10 time quanta */ +#define CAN_BT_BS1_11TQ ((uint8_t)0x0AU) /*!< 11 time quanta */ +#define CAN_BT_BS1_12TQ ((uint8_t)0x0BU) /*!< 12 time quanta */ +#define CAN_BT_BS1_13TQ ((uint8_t)0x0CU) /*!< 13 time quanta */ +#define CAN_BT_BS1_14TQ ((uint8_t)0x0DU) /*!< 14 time quanta */ +#define CAN_BT_BS1_15TQ ((uint8_t)0x0EU) /*!< 15 time quanta */ +#define CAN_BT_BS1_16TQ ((uint8_t)0x0FU) /*!< 16 time quanta */ + +/* CAN time segment 2 */ +#define CAN_BT_BS2_1TQ ((uint8_t)0x00U) /*!< 1 time quanta */ +#define CAN_BT_BS2_2TQ ((uint8_t)0x01U) /*!< 2 time quanta */ +#define CAN_BT_BS2_3TQ ((uint8_t)0x02U) /*!< 3 time quanta */ +#define CAN_BT_BS2_4TQ ((uint8_t)0x03U) /*!< 4 time quanta */ +#define CAN_BT_BS2_5TQ ((uint8_t)0x04U) /*!< 5 time quanta */ +#define CAN_BT_BS2_6TQ ((uint8_t)0x05U) /*!< 6 time quanta */ +#define CAN_BT_BS2_7TQ ((uint8_t)0x06U) /*!< 7 time quanta */ +#define CAN_BT_BS2_8TQ ((uint8_t)0x07U) /*!< 8 time quanta */ + +/* CAN mailbox number */ +#define CAN_MAILBOX0 ((uint8_t)0x00U) /*!< mailbox0 */ +#define CAN_MAILBOX1 ((uint8_t)0x01U) /*!< mailbox1 */ +#define CAN_MAILBOX2 ((uint8_t)0x02U) /*!< mailbox2 */ +#define CAN_NOMAILBOX ((uint8_t)0x03U) /*!< no mailbox empty */ + +/* CAN frame format */ +#define CAN_FF_STANDARD ((uint32_t)0x00000000U) /*!< standard frame */ +#define CAN_FF_EXTENDED ((uint32_t)0x00000004U) /*!< extended frame */ + +/* CAN receive fifo */ +#define CAN_FIFO0 ((uint8_t)0x00U) /*!< receive FIFO0 */ +#define CAN_FIFO1 ((uint8_t)0x01U) /*!< receive FIFO1 */ + +/* frame number of receive fifo */ +#define CAN_RFIF_RFL_MASK ((uint32_t)0x00000003U) /*!< mask for frame number in receive FIFOx */ + +#define CAN_SFID_MASK ((uint32_t)0x000007FFU) /*!< mask of standard identifier */ +#define CAN_EFID_MASK ((uint32_t)0x1FFFFFFFU) /*!< mask of extended identifier */ + +/* CAN working mode */ +#define CAN_MODE_INITIALIZE ((uint8_t)0x01U) /*!< CAN initialize mode */ +#define CAN_MODE_NORMAL ((uint8_t)0x02U) /*!< CAN normal mode */ +#define CAN_MODE_SLEEP ((uint8_t)0x04U) /*!< CAN sleep mode */ + +/* filter bits */ +#define CAN_FILTERBITS_16BIT ((uint8_t)0x00U) /*!< CAN filter 16 bits */ +#define CAN_FILTERBITS_32BIT ((uint8_t)0x01U) /*!< CAN filter 32 bits */ + +/* filter mode */ +#define CAN_FILTERMODE_MASK ((uint8_t)0x00U) /*!< mask mode */ +#define CAN_FILTERMODE_LIST ((uint8_t)0x01U) /*!< list mode */ + +/* filter 16 bits mask */ +#define CAN_FILTER_MASK_16BITS ((uint32_t)0x0000FFFFU) /*!< can filter 16 bits mask */ + +/* frame type */ +#define CAN_FT_DATA ((uint32_t)0x00000000U) /*!< data frame */ +#define CAN_FT_REMOTE ((uint32_t)0x00000002U) /*!< remote frame */ + +/* CAN timeout */ +#define CAN_TIMEOUT ((uint32_t)0x0000FFFFU) /*!< timeout value */ + +/* interrupt enable bits */ +#define CAN_INT_TME CAN_INTEN_TMEIE /*!< transmit mailbox empty interrupt enable */ +#define CAN_INT_RFNE0 CAN_INTEN_RFNEIE0 /*!< receive FIFO0 not empty interrupt enable */ +#define CAN_INT_RFF0 CAN_INTEN_RFFIE0 /*!< receive FIFO0 full interrupt enable */ +#define CAN_INT_RFO0 CAN_INTEN_RFOIE0 /*!< receive FIFO0 overfull interrupt enable */ +#define CAN_INT_RFNE1 CAN_INTEN_RFNEIE1 /*!< receive FIFO1 not empty interrupt enable */ +#define CAN_INT_RFF1 CAN_INTEN_RFFIE1 /*!< receive FIFO1 full interrupt enable */ +#define CAN_INT_RFO1 CAN_INTEN_RFOIE1 /*!< receive FIFO1 overfull interrupt enable */ +#define CAN_INT_WERR CAN_INTEN_WERRIE /*!< warning error interrupt enable */ +#define CAN_INT_PERR CAN_INTEN_PERRIE /*!< passive error interrupt enable */ +#define CAN_INT_BO CAN_INTEN_BOIE /*!< bus-off interrupt enable */ +#define CAN_INT_ERRN CAN_INTEN_ERRNIE /*!< error number interrupt enable */ +#define CAN_INT_ERR CAN_INTEN_ERRIE /*!< error interrupt enable */ +#define CAN_INT_WAKEUP CAN_INTEN_WIE /*!< wakeup interrupt enable */ +#define CAN_INT_SLPW CAN_INTEN_SLPWIE /*!< sleep working interrupt enable */ + +/* function declarations */ +/* deinitialize CAN */ +void can_deinit(uint32_t can_periph); +/* initialize CAN struct */ +void can_struct_para_init(can_struct_type_enum type, void* p_struct); +/* initialize CAN */ +ErrStatus can_init(uint32_t can_periph, can_parameter_struct* can_parameter_init); +/* CAN filter init */ +void can_filter_init(can_filter_parameter_struct* can_filter_parameter_init); +/* set can1 fliter start bank number */ +void can1_filter_start_bank(uint8_t start_bank); +/* enable functions */ +/* CAN debug freeze enable */ +void can_debug_freeze_enable(uint32_t can_periph); +/* CAN debug freeze disable */ +void can_debug_freeze_disable(uint32_t can_periph); +/* CAN time trigger mode enable */ +void can_time_trigger_mode_enable(uint32_t can_periph); +/* CAN time trigger mode disable */ +void can_time_trigger_mode_disable(uint32_t can_periph); + +/* transmit functions */ +/* transmit CAN message */ +uint8_t can_message_transmit(uint32_t can_periph, can_trasnmit_message_struct* transmit_message); +/* get CAN transmit state */ +can_transmit_state_enum can_transmit_states(uint32_t can_periph, uint8_t mailbox_number); +/* stop CAN transmission */ +void can_transmission_stop(uint32_t can_periph, uint8_t mailbox_number); +/* CAN receive message */ +void can_message_receive(uint32_t can_periph, uint8_t fifo_number, can_receive_message_struct* receive_message); +/* CAN release fifo */ +void can_fifo_release(uint32_t can_periph, uint8_t fifo_number); +/* CAN receive message length */ +uint8_t can_receive_message_length_get(uint32_t can_periph, uint8_t fifo_number); +/* CAN working mode */ +ErrStatus can_working_mode_set(uint32_t can_periph, uint8_t working_mode); +/* CAN wakeup from sleep mode */ +ErrStatus can_wakeup(uint32_t can_periph); + +/* CAN get error */ +can_error_enum can_error_get(uint32_t can_periph); +/* get CAN receive error number */ +uint8_t can_receive_error_number_get(uint32_t can_periph); +/* get CAN transmit error number */ +uint8_t can_transmit_error_number_get(uint32_t can_periph); + +/* CAN interrupt enable */ +void can_interrupt_enable(uint32_t can_periph, uint32_t interrupt); +/* CAN interrupt disable */ +void can_interrupt_disable(uint32_t can_periph, uint32_t interrupt); +/* CAN get flag state */ +FlagStatus can_flag_get(uint32_t can_periph, can_flag_enum flag); +/* CAN clear flag state */ +void can_flag_clear(uint32_t can_periph, can_flag_enum flag); +/* CAN get interrupt flag state */ +FlagStatus can_interrupt_flag_get(uint32_t can_periph, can_interrupt_flag_enum flag); +/* CAN clear interrupt flag state */ +void can_interrupt_flag_clear(uint32_t can_periph, can_interrupt_flag_enum flag); + +#endif /* GD32F10x_CAN_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_crc.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_crc.h new file mode 100644 index 0000000000000000000000000000000000000000..9f2781ff2676fe3fa0ef50220ad93ece268200ac --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_crc.h @@ -0,0 +1,81 @@ +/*! + \file gd32f10x_crc.h + \brief definitions for the CRC + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_CRC_H +#define GD32F10X_CRC_H + +#include "gd32f10x.h" + +/* CRC definitions */ +#define CRC CRC_BASE + +/* registers definitions */ +#define CRC_DATA REG32(CRC + 0x00U) /*!< CRC data register */ +#define CRC_FDATA REG32(CRC + 0x04U) /*!< CRC free data register */ +#define CRC_CTL REG32(CRC + 0x08U) /*!< CRC control register */ + +/* bits definitions */ +/* CRC_DATA */ +#define CRC_DATA_DATA BITS(0,31) /*!< CRC calculation result bits */ + +/* CRC_FDATA */ +#define CRC_FDATA_FDATA BITS(0,7) /*!< CRC free data bits */ + +/* CRC_CTL */ +#define CRC_CTL_RST BIT(0) /*!< CRC reset CRC_DATA register bit */ + +/* function declarations */ +/* deinit CRC calculation unit */ +void crc_deinit(void); + +/* reset data register to the value of initializaiton data register */ +void crc_data_register_reset(void); +/* read the value of the data register */ +uint32_t crc_data_register_read(void); + +/* read the value of the free data register */ +uint8_t crc_free_data_register_read(void); +/* write data to the free data register */ +void crc_free_data_register_write(uint8_t free_data); + +/* calculate the CRC value of a 32-bit data */ +uint32_t crc_single_data_calculate(uint32_t sdata); +/* calculate the CRC value of an array of 32-bit values */ +uint32_t crc_block_data_calculate(uint32_t array[], uint32_t size); + +#endif /* GD32F10X_CRC_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dac.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dac.h new file mode 100644 index 0000000000000000000000000000000000000000..aa9e70bbf802dacb42fbc14d18bb067245d6eeeb --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dac.h @@ -0,0 +1,250 @@ +/*! + \file gd32f10x_dac.h + \brief definitions for the DAC + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_DAC_H +#define GD32F10X_DAC_H + +#include "gd32f10x.h" + +/* DACx(x=0,1) definitions */ +#define DAC DAC_BASE +#define DAC0 0U +#define DAC1 1U + +/* registers definitions */ +#define DAC_CTL REG32(DAC + 0x00U) /*!< DAC control register */ +#define DAC_SWT REG32(DAC + 0x04U) /*!< DAC software trigger register */ +#define DAC0_R12DH REG32(DAC + 0x08U) /*!< DAC0 12-bit right-aligned data holding register */ +#define DAC0_L12DH REG32(DAC + 0x0CU) /*!< DAC0 12-bit left-aligned data holding register */ +#define DAC0_R8DH REG32(DAC + 0x10U) /*!< DAC0 8-bit right-aligned data holding register */ +#define DAC1_R12DH REG32(DAC + 0x14U) /*!< DAC1 12-bit right-aligned data holding register */ +#define DAC1_L12DH REG32(DAC + 0x18U) /*!< DAC1 12-bit left-aligned data holding register */ +#define DAC1_R8DH REG32(DAC + 0x1CU) /*!< DAC1 8-bit right-aligned data holding register */ +#define DACC_R12DH REG32(DAC + 0x20U) /*!< DAC concurrent mode 12-bit right-aligned data holding register */ +#define DACC_L12DH REG32(DAC + 0x24U) /*!< DAC concurrent mode 12-bit left-aligned data holding register */ +#define DACC_R8DH REG32(DAC + 0x28U) /*!< DAC concurrent mode 8-bit right-aligned data holding register */ +#define DAC0_DO REG32(DAC + 0x2CU) /*!< DAC0 data output register */ +#define DAC1_DO REG32(DAC + 0x30U) /*!< DAC1 data output register */ + +/* bits definitions */ +/* DAC_CTL */ +#define DAC_CTL_DEN0 BIT(0) /*!< DAC0 enable/disable bit */ +#define DAC_CTL_DBOFF0 BIT(1) /*!< DAC0 output buffer turn on/off bit */ +#define DAC_CTL_DTEN0 BIT(2) /*!< DAC0 trigger enable/disable bit */ +#define DAC_CTL_DTSEL0 BITS(3,5) /*!< DAC0 trigger source selection enable/disable bits */ +#define DAC_CTL_DWM0 BITS(6,7) /*!< DAC0 noise wave mode */ +#define DAC_CTL_DWBW0 BITS(8,11) /*!< DAC0 noise wave bit width */ +#define DAC_CTL_DDMAEN0 BIT(12) /*!< DAC0 DMA enable/disable bit */ +#define DAC_CTL_DEN1 BIT(16) /*!< DAC1 enable/disable bit */ +#define DAC_CTL_DBOFF1 BIT(17) /*!< DAC1 output buffer turn on/turn off bit */ +#define DAC_CTL_DTEN1 BIT(18) /*!< DAC1 trigger enable/disable bit */ +#define DAC_CTL_DTSEL1 BITS(19,21) /*!< DAC1 trigger source selection enable/disable bits */ +#define DAC_CTL_DWM1 BITS(22,23) /*!< DAC1 noise wave mode */ +#define DAC_CTL_DWBW1 BITS(24,27) /*!< DAC1 noise wave bit width */ +#define DAC_CTL_DDMAEN1 BIT(28) /*!< DAC1 DMA enable/disable bit */ + +/* DAC_SWT */ +#define DAC_SWT_SWTR0 BIT(0) /*!< DAC0 software trigger bit, cleared by hardware */ +#define DAC_SWT_SWTR1 BIT(1) /*!< DAC1 software trigger bit, cleared by hardware */ + +/* DAC0_R12DH */ +#define DAC0_R12DH_DAC0_DH BITS(0,11) /*!< DAC0 12-bit right-aligned data bits */ + +/* DAC0_L12DH */ +#define DAC0_L12DH_DAC0_DH BITS(4,15) /*!< DAC0 12-bit left-aligned data bits */ + +/* DAC0_R8DH */ +#define DAC0_R8DH_DAC0_DH BITS(0,7) /*!< DAC0 8-bit right-aligned data bits */ + +/* DAC1_R12DH */ +#define DAC1_R12DH_DAC1_DH BITS(0,11) /*!< DAC1 12-bit right-aligned data bits */ + +/* DAC1_L12DH */ +#define DAC1_L12DH_DAC1_DH BITS(4,15) /*!< DAC1 12-bit left-aligned data bits */ + +/* DAC1_R8DH */ +#define DAC1_R8DH_DAC1_DH BITS(0,7) /*!< DAC1 8-bit right-aligned data bits */ + +/* DACC_R12DH */ +#define DACC_R12DH_DAC0_DH BITS(0,11) /*!< DAC concurrent mode DAC0 12-bit right-aligned data bits */ +#define DACC_R12DH_DAC1_DH BITS(16,27) /*!< DAC concurrent mode DAC1 12-bit right-aligned data bits */ + +/* DACC_L12DH */ +#define DACC_L12DH_DAC0_DH BITS(4,15) /*!< DAC concurrent mode DAC0 12-bit left-aligned data bits */ +#define DACC_L12DH_DAC1_DH BITS(20,31) /*!< DAC concurrent mode DAC1 12-bit left-aligned data bits */ + +/* DACC_R8DH */ +#define DACC_R8DH_DAC0_DH BITS(0,7) /*!< DAC concurrent mode DAC0 8-bit right-aligned data bits */ +#define DACC_R8DH_DAC1_DH BITS(8,15) /*!< DAC concurrent mode DAC1 8-bit right-aligned data bits */ + +/* DAC0_DO */ +#define DAC0_DO_DAC0_DO BITS(0,11) /*!< DAC0 12-bit output data bits */ + +/* DAC1_DO */ +#define DAC1_DO_DAC1_DO BITS(0,11) /*!< DAC1 12-bit output data bits */ + +/* constants definitions */ +/* DAC trigger source */ +#define CTL_DTSEL(regval) (BITS(3,5) & ((uint32_t)(regval) << 3)) +#define DAC_TRIGGER_T5_TRGO CTL_DTSEL(0) /*!< TIMER5 TRGO */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define DAC_TRIGGER_T7_TRGO CTL_DTSEL(1) /*!< TIMER7 TRGO */ +#elif defined(GD32F10X_CL) +#define DAC_TRIGGER_T2_TRGO CTL_DTSEL(1) /*!< TIMER2 TRGO */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ +#define DAC_TRIGGER_T6_TRGO CTL_DTSEL(2) /*!< TIMER6 TRGO */ +#define DAC_TRIGGER_T4_TRGO CTL_DTSEL(3) /*!< TIMER4 TRGO */ +#define DAC_TRIGGER_T1_TRGO CTL_DTSEL(4) /*!< TIMER1 TRGO */ +#define DAC_TRIGGER_T3_TRGO CTL_DTSEL(5) /*!< TIMER3 TRGO */ +#define DAC_TRIGGER_EXTI_9 CTL_DTSEL(6) /*!< EXTI interrupt line9 event */ +#define DAC_TRIGGER_SOFTWARE CTL_DTSEL(7) /*!< software trigger */ + +/* DAC noise wave mode */ +#define CTL_DWM(regval) (BITS(6,7) & ((uint32_t)(regval) << 6)) +#define DAC_WAVE_DISABLE CTL_DWM(0) /*!< wave disable */ +#define DAC_WAVE_MODE_LFSR CTL_DWM(1) /*!< LFSR noise mode */ +#define DAC_WAVE_MODE_TRIANGLE CTL_DWM(2) /*!< triangle noise mode */ + +/* DAC noise wave bit width */ +#define DWBW(regval) (BITS(8,11) & ((uint32_t)(regval) << 8)) +#define DAC_WAVE_BIT_WIDTH_1 DWBW(0) /*!< bit width of the wave signal is 1 */ +#define DAC_WAVE_BIT_WIDTH_2 DWBW(1) /*!< bit width of the wave signal is 2 */ +#define DAC_WAVE_BIT_WIDTH_3 DWBW(2) /*!< bit width of the wave signal is 3 */ +#define DAC_WAVE_BIT_WIDTH_4 DWBW(3) /*!< bit width of the wave signal is 4 */ +#define DAC_WAVE_BIT_WIDTH_5 DWBW(4) /*!< bit width of the wave signal is 5 */ +#define DAC_WAVE_BIT_WIDTH_6 DWBW(5) /*!< bit width of the wave signal is 6 */ +#define DAC_WAVE_BIT_WIDTH_7 DWBW(6) /*!< bit width of the wave signal is 7 */ +#define DAC_WAVE_BIT_WIDTH_8 DWBW(7) /*!< bit width of the wave signal is 8 */ +#define DAC_WAVE_BIT_WIDTH_9 DWBW(8) /*!< bit width of the wave signal is 9 */ +#define DAC_WAVE_BIT_WIDTH_10 DWBW(9) /*!< bit width of the wave signal is 10 */ +#define DAC_WAVE_BIT_WIDTH_11 DWBW(10) /*!< bit width of the wave signal is 11 */ +#define DAC_WAVE_BIT_WIDTH_12 DWBW(11) /*!< bit width of the wave signal is 12 */ + +/* unmask LFSR bits in DAC LFSR noise mode */ +#define DAC_LFSR_BIT0 DAC_WAVE_BIT_WIDTH_1 /*!< unmask the LFSR bit0 */ +#define DAC_LFSR_BITS1_0 DAC_WAVE_BIT_WIDTH_2 /*!< unmask the LFSR bits[1:0] */ +#define DAC_LFSR_BITS2_0 DAC_WAVE_BIT_WIDTH_3 /*!< unmask the LFSR bits[2:0] */ +#define DAC_LFSR_BITS3_0 DAC_WAVE_BIT_WIDTH_4 /*!< unmask the LFSR bits[3:0] */ +#define DAC_LFSR_BITS4_0 DAC_WAVE_BIT_WIDTH_5 /*!< unmask the LFSR bits[4:0] */ +#define DAC_LFSR_BITS5_0 DAC_WAVE_BIT_WIDTH_6 /*!< unmask the LFSR bits[5:0] */ +#define DAC_LFSR_BITS6_0 DAC_WAVE_BIT_WIDTH_7 /*!< unmask the LFSR bits[6:0] */ +#define DAC_LFSR_BITS7_0 DAC_WAVE_BIT_WIDTH_8 /*!< unmask the LFSR bits[7:0] */ +#define DAC_LFSR_BITS8_0 DAC_WAVE_BIT_WIDTH_9 /*!< unmask the LFSR bits[8:0] */ +#define DAC_LFSR_BITS9_0 DAC_WAVE_BIT_WIDTH_10 /*!< unmask the LFSR bits[9:0] */ +#define DAC_LFSR_BITS10_0 DAC_WAVE_BIT_WIDTH_11 /*!< unmask the LFSR bits[10:0] */ +#define DAC_LFSR_BITS11_0 DAC_WAVE_BIT_WIDTH_12 /*!< unmask the LFSR bits[11:0] */ + +/* DAC data alignment */ +#define DATA_ALIGN(regval) (BITS(0,1) & ((uint32_t)(regval) << 0)) +#define DAC_ALIGN_12B_R DATA_ALIGN(0) /*!< data right 12b alignment */ +#define DAC_ALIGN_12B_L DATA_ALIGN(1) /*!< data left 12b alignment */ +#define DAC_ALIGN_8B_R DATA_ALIGN(2) /*!< data right 8b alignment */ +/* triangle amplitude in DAC triangle noise mode */ +#define DAC_TRIANGLE_AMPLITUDE_1 DAC_WAVE_BIT_WIDTH_1 /*!< triangle amplitude is 1 */ +#define DAC_TRIANGLE_AMPLITUDE_3 DAC_WAVE_BIT_WIDTH_2 /*!< triangle amplitude is 3 */ +#define DAC_TRIANGLE_AMPLITUDE_7 DAC_WAVE_BIT_WIDTH_3 /*!< triangle amplitude is 7 */ +#define DAC_TRIANGLE_AMPLITUDE_15 DAC_WAVE_BIT_WIDTH_4 /*!< triangle amplitude is 15 */ +#define DAC_TRIANGLE_AMPLITUDE_31 DAC_WAVE_BIT_WIDTH_5 /*!< triangle amplitude is 31 */ +#define DAC_TRIANGLE_AMPLITUDE_63 DAC_WAVE_BIT_WIDTH_6 /*!< triangle amplitude is 63 */ +#define DAC_TRIANGLE_AMPLITUDE_127 DAC_WAVE_BIT_WIDTH_7 /*!< triangle amplitude is 127 */ +#define DAC_TRIANGLE_AMPLITUDE_255 DAC_WAVE_BIT_WIDTH_8 /*!< triangle amplitude is 255 */ +#define DAC_TRIANGLE_AMPLITUDE_511 DAC_WAVE_BIT_WIDTH_9 /*!< triangle amplitude is 511 */ +#define DAC_TRIANGLE_AMPLITUDE_1023 DAC_WAVE_BIT_WIDTH_10 /*!< triangle amplitude is 1023 */ +#define DAC_TRIANGLE_AMPLITUDE_2047 DAC_WAVE_BIT_WIDTH_11 /*!< triangle amplitude is 2047 */ +#define DAC_TRIANGLE_AMPLITUDE_4095 DAC_WAVE_BIT_WIDTH_12 /*!< triangle amplitude is 4095 */ + +/* function declarations */ +/* initialization functions */ +/* deinitialize DAC */ +void dac_deinit(void); +/* enable DAC */ +void dac_enable(uint32_t dac_periph); +/* disable DAC */ +void dac_disable(uint32_t dac_periph); +/* enable DAC DMA */ +void dac_dma_enable(uint32_t dac_periph); +/* disable DAC DMA */ +void dac_dma_disable(uint32_t dac_periph); +/* enable DAC output buffer */ +void dac_output_buffer_enable(uint32_t dac_periph); +/* disable DAC output buffer */ +void dac_output_buffer_disable(uint32_t dac_periph); +/* get the last data output value */ +uint16_t dac_output_value_get(uint32_t dac_periph); +/* set DAC data holding register value */ +void dac_data_set(uint32_t dac_periph, uint32_t dac_align, uint16_t data); + +/* DAC trigger configuration */ +/* enable DAC trigger */ +void dac_trigger_enable(uint32_t dac_periph); +/* disable DAC trigger */ +void dac_trigger_disable(uint32_t dac_periph); +/* configure DAC trigger source */ +void dac_trigger_source_config(uint32_t dac_periph, uint32_t triggersource); +/* enable DAC software trigger */ +void dac_software_trigger_enable(uint32_t dac_periph); +/* disable DAC software trigger */ +void dac_software_trigger_disable(uint32_t dac_periph); + +/* DAC wave mode configuration */ +/* configure DAC wave mode */ +void dac_wave_mode_config(uint32_t dac_periph, uint32_t wave_mode); +/* configure DAC wave bit width */ +void dac_wave_bit_width_config(uint32_t dac_periph, uint32_t bit_width); +/* configure DAC LFSR noise mode */ +void dac_lfsr_noise_config(uint32_t dac_periph, uint32_t unmask_bits); +/* configure DAC triangle noise mode */ +void dac_triangle_noise_config(uint32_t dac_periph, uint32_t amplitude); + +/* DAC concurrent mode configuration */ +/* enable DAC concurrent mode */ +void dac_concurrent_enable(void); +/* disable DAC concurrent mode */ +void dac_concurrent_disable(void); +/* enable DAC concurrent software trigger */ +void dac_concurrent_software_trigger_enable(void); +/* disable DAC concurrent software trigger */ +void dac_concurrent_software_trigger_disable(void); +/* enable DAC concurrent buffer function */ +void dac_concurrent_output_buffer_enable(void); +/* disable DAC concurrent buffer function */ +void dac_concurrent_output_buffer_disable(void); +/* set DAC concurrent mode data holding register value */ +void dac_concurrent_data_set(uint32_t dac_align, uint16_t data0, uint16_t data1); + +#endif /* GD32F10X_DAC_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dbg.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dbg.h new file mode 100644 index 0000000000000000000000000000000000000000..d9248414b8fd862ea52e1160935322c956ce37a2 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dbg.h @@ -0,0 +1,152 @@ +/*! + \file gd32f10x_dbg.h + \brief definitions for the DBG + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_DBG_H +#define GD32F10X_DBG_H + +#include "gd32f10x.h" + +/* DBG definitions */ +#define DBG DBG_BASE + +/* registers definitions */ +#define DBG_ID REG32(DBG + 0x00U) /*!< DBG_ID code register */ +#define DBG_CTL REG32(DBG + 0x04U) /*!< DBG control register */ + +/* bits definitions */ +/* DBG_ID */ +#define DBG_ID_ID_CODE BITS(0,31) /*!< DBG ID code values */ + +/* DBG_CTL */ +#define DBG_CTL_SLP_HOLD BIT(0) /*!< keep debugger connection during sleep mode */ +#define DBG_CTL_DSLP_HOLD BIT(1) /*!< keep debugger connection during deepsleep mode */ +#define DBG_CTL_STB_HOLD BIT(2) /*!< keep debugger connection during standby mode */ +#define DBG_CTL_TRACE_IOEN BIT(5) /*!< enable trace pin assignment */ +#define DBG_CTL_TRACE_MODE BITS(6,7) /*!< trace pin mode selection */ +#define DBG_CTL_FWDGT_HOLD BIT(8) /*!< debug FWDGT kept when core is halted */ +#define DBG_CTL_WWDGT_HOLD BIT(9) /*!< debug WWDGT kept when core is halted */ +#define DBG_CTL_TIMER0_HOLD BIT(10) /*!< hold TIMER0 counter when core is halted */ +#define DBG_CTL_TIMER1_HOLD BIT(11) /*!< hold TIMER1 counter when core is halted */ +#define DBG_CTL_TIMER2_HOLD BIT(12) /*!< hold TIMER2 counter when core is halted */ +#define DBG_CTL_TIMER3_HOLD BIT(13) /*!< hold TIMER3 counter when core is halted */ +#define DBG_CTL_CAN0_HOLD BIT(14) /*!< debug CAN0 kept when core is halted */ +#define DBG_CTL_I2C0_HOLD BIT(15) /*!< hold I2C0 smbus when core is halted */ +#define DBG_CTL_I2C1_HOLD BIT(16) /*!< hold I2C1 smbus when core is halted */ +#define DBG_CTL_TIMER4_HOLD BIT(17) /*!< hold TIMER4 counter when core is halted */ +#define DBG_CTL_TIMER5_HOLD BIT(18) /*!< hold TIMER5 counter when core is halted */ +#define DBG_CTL_TIMER6_HOLD BIT(19) /*!< hold TIMER6 counter when core is halted */ +#define DBG_CTL_TIMER7_HOLD BIT(20) /*!< hold TIMER7 counter when core is halted */ +#ifdef GD32F10x_CL +#define DBG_CTL_CAN1_HOLD BIT(21) /*!< debug CAN1 kept when core is halted */ +#endif /* GD32F10x_CL */ +#ifdef GD32F10X_XD +#define DBG_CTL_TIMER11_HOLD BIT(25) /*!< hold TIMER11 counter when core is halted */ +#define DBG_CTL_TIMER12_HOLD BIT(26) /*!< hold TIMER12 counter when core is halted */ +#define DBG_CTL_TIMER13_HOLD BIT(27) /*!< hold TIMER13 counter when core is halted */ +#define DBG_CTL_TIMER8_HOLD BIT(28) /*!< hold TIMER8 counter when core is halted */ +#define DBG_CTL_TIMER9_HOLD BIT(29) /*!< hold TIMER9 counter when core is halted */ +#define DBG_CTL_TIMER10_HOLD BIT(30) /*!< hold TIMER10 counter when core is halted */ +#endif /* GD32F10x_XD */ + +/* constants definitions */ +/* debug hold when core is halted */ +typedef enum +{ + DBG_FWDGT_HOLD = BIT(8), /*!< debug FWDGT kept when core is halted */ + DBG_WWDGT_HOLD = BIT(9), /*!< debug WWDGT kept when core is halted */ + DBG_TIMER0_HOLD = BIT(10), /*!< hold TIMER0 counter when core is halted */ + DBG_TIMER1_HOLD = BIT(11), /*!< hold TIMER1 counter when core is halted */ + DBG_TIMER2_HOLD = BIT(12), /*!< hold TIMER2 counter when core is halted */ + DBG_TIMER3_HOLD = BIT(13), /*!< hold TIMER3 counter when core is halted */ + DBG_CAN0_HOLD = BIT(14), /*!< debug CAN0 kept when core is halted */ + DBG_I2C0_HOLD = BIT(15), /*!< hold I2C0 smbus when core is halted */ + DBG_I2C1_HOLD = BIT(16), /*!< hold I2C1 smbus when core is halted */ + DBG_TIMER4_HOLD = BIT(17), /*!< hold TIMER4 counter when core is halted */ + DBG_TIMER5_HOLD = BIT(18), /*!< hold TIMER5 counter when core is halted */ + DBG_TIMER6_HOLD = BIT(19), /*!< hold TIMER6 counter when core is halted */ + DBG_TIMER7_HOLD = BIT(20), /*!< hold TIMER7 counter when core is halted */ +#ifdef GD32F10x_CL + DBG_CAN1_HOLD = BIT(21), /*!< debug CAN1 kept when core is halted */ +#endif /* GD32F10x_CL */ +#if (defined(GD32F10x_XD) || defined(GD32F10x_CL)) + DBG_TIMER11_HOLD = BIT(25), /*!< hold TIMER11 counter when core is halted */ + DBG_TIMER12_HOLD = BIT(26), /*!< hold TIMER12 counter when core is halted */ + DBG_TIMER13_HOLD = BIT(27), /*!< hold TIMER13 counter when core is halted */ + DBG_TIMER8_HOLD = BIT(28), /*!< hold TIMER8 counter when core is halted */ + DBG_TIMER9_HOLD = BIT(29), /*!< hold TIMER9 counter when core is halted */ + DBG_TIMER10_HOLD = BIT(30), /*!< hold TIMER10 counter when core is halted */ +#endif /* GD32F10x_XD || GD32F10x_CL*/ +}dbg_periph_enum; + +/* DBG low power mode configurations */ +#define DBG_LOW_POWER_SLEEP DBG_CTL_SLP_HOLD /*!< keep debugger connection during sleep mode */ +#define DBG_LOW_POWER_DEEPSLEEP DBG_CTL_DSLP_HOLD /*!< keep debugger connection during deepsleep mode */ +#define DBG_LOW_POWER_STANDBY DBG_CTL_STB_HOLD /*!< keep debugger connection during standby mode */ + +/* DBG_CTL0_TRACE_MODE configurations */ +#define CTL_TRACE_MODE(regval) (BITS(6,7) & ((uint32_t)(regval) << 6U)) +#define TRACE_MODE_ASYNC CTL_TRACE_MODE(0) /*!< trace pin used for async mode */ +#define TRACE_MODE_SYNC_DATASIZE_1 CTL_TRACE_MODE(1) /*!< trace pin used for sync mode and data size is 1 */ +#define TRACE_MODE_SYNC_DATASIZE_2 CTL_TRACE_MODE(2) /*!< trace pin used for sync mode and data size is 2 */ +#define TRACE_MODE_SYNC_DATASIZE_4 CTL_TRACE_MODE(3) /*!< trace pin used for sync mode and data size is 4 */ + +/* function declarations */ +/* read DBG_ID code register */ +uint32_t dbg_id_get(void); + +/* low power behavior configuration */ +/* enable low power behavior when the MCU is in debug mode */ +void dbg_low_power_enable(uint32_t dbg_low_power); +/* disable low power behavior when the MCU is in debug mode */ +void dbg_low_power_disable(uint32_t dbg_low_power); + +/* peripheral behavior configuration */ +/* enable peripheral behavior when the MCU is in debug mode */ +void dbg_periph_enable(dbg_periph_enum dbg_periph); +/* disable peripheral behavior when the MCU is in debug mode */ +void dbg_periph_disable(dbg_periph_enum dbg_periph); + +/* trace pin assignment configuration */ +/* enable trace pin assignment */ +void dbg_trace_pin_enable(void); +/* disable trace pin assignment */ +void dbg_trace_pin_disable(void); +/* set trace pin mode */ +void dbg_trace_pin_mode_set(uint32_t trace_mode); + +#endif /* GD32F10x_DBG_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dma.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dma.h new file mode 100644 index 0000000000000000000000000000000000000000..3a90e8d690621bac70f9e41046a480b6ea76614e --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_dma.h @@ -0,0 +1,289 @@ +/*! + \file gd32f10x_dma.h + \brief definitions for the DMA + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_DMA_H +#define GD32F10X_DMA_H + +#include "gd32f10x.h" + +/* DMA definitions */ +#define DMA0 (DMA_BASE) /*!< DMA0 base address */ +#define DMA1 (DMA_BASE + 0x0400U) /*!< DMA1 base address */ + +/* registers definitions */ +#define DMA_INTF(dmax) REG32((dmax) + 0x00U) /*!< DMA interrupt flag register */ +#define DMA_INTC(dmax) REG32((dmax) + 0x04U) /*!< DMA interrupt flag clear register */ + +#define DMA_CH0CTL(dmax) REG32((dmax) + 0x08U) /*!< DMA channel 0 control register */ +#define DMA_CH0CNT(dmax) REG32((dmax) + 0x0CU) /*!< DMA channel 0 counter register */ +#define DMA_CH0PADDR(dmax) REG32((dmax) + 0x10U) /*!< DMA channel 0 peripheral base address register */ +#define DMA_CH0MADDR(dmax) REG32((dmax) + 0x14U) /*!< DMA channel 0 memory base address register */ + +#define DMA_CH1CTL(dmax) REG32((dmax) + 0x1CU) /*!< DMA channel 1 control register */ +#define DMA_CH1CNT(dmax) REG32((dmax) + 0x20U) /*!< DMA channel 1 counter register */ +#define DMA_CH1PADDR(dmax) REG32((dmax) + 0x24U) /*!< DMA channel 1 peripheral base address register */ +#define DMA_CH1MADDR(dmax) REG32((dmax) + 0x28U) /*!< DMA channel 1 memory base address register */ + +#define DMA_CH2CTL(dmax) REG32((dmax) + 0x30U) /*!< DMA channel 2 control register */ +#define DMA_CH2CNT(dmax) REG32((dmax) + 0x34U) /*!< DMA channel 2 counter register */ +#define DMA_CH2PADDR(dmax) REG32((dmax) + 0x38U) /*!< DMA channel 2 peripheral base address register */ +#define DMA_CH2MADDR(dmax) REG32((dmax) + 0x3CU) /*!< DMA channel 2 memory base address register */ + +#define DMA_CH3CTL(dmax) REG32((dmax) + 0x44U) /*!< DMA channel 3 control register */ +#define DMA_CH3CNT(dmax) REG32((dmax) + 0x48U) /*!< DMA channel 3 counter register */ +#define DMA_CH3PADDR(dmax) REG32((dmax) + 0x4CU) /*!< DMA channel 3 peripheral base address register */ +#define DMA_CH3MADDR(dmax) REG32((dmax) + 0x50U) /*!< DMA channel 3 memory base address register */ + +#define DMA_CH4CTL(dmax) REG32((dmax) + 0x58U) /*!< DMA channel 4 control register */ +#define DMA_CH4CNT(dmax) REG32((dmax) + 0x5CU) /*!< DMA channel 4 counter register */ +#define DMA_CH4PADDR(dmax) REG32((dmax) + 0x60U) /*!< DMA channel 4 peripheral base address register */ +#define DMA_CH4MADDR(dmax) REG32((dmax) + 0x64U) /*!< DMA channel 4 memory base address register */ + +#define DMA_CH5CTL(dmax) REG32((dmax) + 0x6CU) /*!< DMA channel 5 control register */ +#define DMA_CH5CNT(dmax) REG32((dmax) + 0x70U) /*!< DMA channel 5 counter register */ +#define DMA_CH5PADDR(dmax) REG32((dmax) + 0x74U) /*!< DMA channel 5 peripheral base address register */ +#define DMA_CH5MADDR(dmax) REG32((dmax) + 0x78U) /*!< DMA channel 5 memory base address register */ + +#define DMA_CH6CTL(dmax) REG32((dmax) + 0x80U) /*!< DMA channel 6 control register */ +#define DMA_CH6CNT(dmax) REG32((dmax) + 0x84U) /*!< DMA channel 6 counter register */ +#define DMA_CH6PADDR(dmax) REG32((dmax) + 0x88U) /*!< DMA channel 6 peripheral base address register */ +#define DMA_CH6MADDR(dmax) REG32((dmax) + 0x8CU) /*!< DMA channel 6 memory base address register */ + +/* bits definitions */ +/* DMA_INTF */ +#define DMA_INTF_GIF BIT(0) /*!< global interrupt flag of channel */ +#define DMA_INTF_FTFIF BIT(1) /*!< full transfer finish flag of channel */ +#define DMA_INTF_HTFIF BIT(2) /*!< half transfer finish flag of channel */ +#define DMA_INTF_ERRIF BIT(3) /*!< error flag of channel */ + +/* DMA_INTC */ +#define DMA_INTC_GIFC BIT(0) /*!< clear global interrupt flag of channel */ +#define DMA_INTC_FTFIFC BIT(1) /*!< clear transfer finish flag of channel */ +#define DMA_INTC_HTFIFC BIT(2) /*!< clear half transfer finish flag of channel */ +#define DMA_INTC_ERRIFC BIT(3) /*!< clear error flag of channel */ + +/* DMA_CHxCTL, x=0..6 */ +#define DMA_CHXCTL_CHEN BIT(0) /*!< channel enable */ +#define DMA_CHXCTL_FTFIE BIT(1) /*!< enable bit for channel full transfer finish interrupt */ +#define DMA_CHXCTL_HTFIE BIT(2) /*!< enable bit for channel half transfer finish interrupt */ +#define DMA_CHXCTL_ERRIE BIT(3) /*!< enable bit for channel error interrupt */ +#define DMA_CHXCTL_DIR BIT(4) /*!< transfer direction */ +#define DMA_CHXCTL_CMEN BIT(5) /*!< circular mode enable */ +#define DMA_CHXCTL_PNAGA BIT(6) /*!< next address generation algorithm of peripheral */ +#define DMA_CHXCTL_MNAGA BIT(7) /*!< next address generation algorithm of memory */ +#define DMA_CHXCTL_PWIDTH BITS(8,9) /*!< transfer data width of peripheral */ +#define DMA_CHXCTL_MWIDTH BITS(10,11) /*!< transfer data width of memory */ +#define DMA_CHXCTL_PRIO BITS(12,13) /*!< priority level */ +#define DMA_CHXCTL_M2M BIT(14) /*!< memory to memory mode */ + +/* DMA_CHxCNT, x=0..6 */ +#define DMA_CHXCNT_CNT BITS(0,15) /*!< transfer counter */ + +/* DMA_CHxPADDR, x=0..6 */ +#define DMA_CHXPADDR_PADDR BITS(0,31) /*!< peripheral base address */ + +/* DMA_CHxMADDR, x=0..6 */ +#define DMA_CHXMADDR_MADDR BITS(0,31) /*!< memory base address */ + +/* constants definitions */ +/* DMA channel select */ +typedef enum +{ + DMA_CH0 = 0, /*!< DMA channel 0 */ + DMA_CH1, /*!< DMA channel 1 */ + DMA_CH2, /*!< DMA channel 2 */ + DMA_CH3, /*!< DMA channel 3 */ + DMA_CH4, /*!< DMA channel 4 */ + DMA_CH5, /*!< DMA channel 5 */ + DMA_CH6 /*!< DMA channel 6 */ +} dma_channel_enum; + +/* DMA initialize struct */ +typedef struct +{ + uint32_t periph_addr; /*!< peripheral base address */ + uint32_t periph_width; /*!< transfer data size of peripheral */ + uint32_t memory_addr; /*!< memory base address */ + uint32_t memory_width; /*!< transfer data size of memory */ + uint32_t number; /*!< channel transfer number */ + uint32_t priority; /*!< channel priority level */ + uint8_t periph_inc; /*!< peripheral increasing mode */ + uint8_t memory_inc; /*!< memory increasing mode */ + uint8_t direction; /*!< channel data transfer direction */ + +} dma_parameter_struct; + +#define DMA_FLAG_ADD(flag, shift) ((flag) << ((shift) * 4U)) /*!< DMA channel flag shift */ + +/* DMA_register address */ +#define DMA_CHCTL(dma, channel) REG32(((dma) + 0x08U) + 0x14U * (uint32_t)(channel)) /*!< the address of DMA channel CHXCTL register */ +#define DMA_CHCNT(dma, channel) REG32(((dma) + 0x0CU) + 0x14U * (uint32_t)(channel)) /*!< the address of DMA channel CHXCNT register */ +#define DMA_CHPADDR(dma, channel) REG32(((dma) + 0x10U) + 0x14U * (uint32_t)(channel)) /*!< the address of DMA channel CHXPADDR register */ +#define DMA_CHMADDR(dma, channel) REG32(((dma) + 0x14U) + 0x14U * (uint32_t)(channel)) /*!< the address of DMA channel CHXMADDR register */ + +/* DMA reset value */ +#define DMA_CHCTL_RESET_VALUE ((uint32_t)0x00000000U) /*!< the reset value of DMA channel CHXCTL register */ +#define DMA_CHCNT_RESET_VALUE ((uint32_t)0x00000000U) /*!< the reset value of DMA channel CHXCNT register */ +#define DMA_CHPADDR_RESET_VALUE ((uint32_t)0x00000000U) /*!< the reset value of DMA channel CHXPADDR register */ +#define DMA_CHMADDR_RESET_VALUE ((uint32_t)0x00000000U) /*!< the reset value of DMA channel CHXMADDR register */ +#define DMA_CHINTF_RESET_VALUE (DMA_INTF_GIF | DMA_INTF_FTFIF | \ + DMA_INTF_HTFIF | DMA_INTF_ERRIF) /*!< clear DMA channel DMA_INTF register */ + +/* DMA_INTF register */ +/* interrupt flag bits */ +#define DMA_INT_FLAG_G DMA_INTF_GIF /*!< global interrupt flag of channel */ +#define DMA_INT_FLAG_FTF DMA_INTF_FTFIF /*!< full transfer finish interrupt flag of channel */ +#define DMA_INT_FLAG_HTF DMA_INTF_HTFIF /*!< half transfer finish interrupt flag of channel */ +#define DMA_INT_FLAG_ERR DMA_INTF_ERRIF /*!< error interrupt flag of channel */ + +/* flag bits */ +#define DMA_FLAG_G DMA_INTF_GIF /*!< global interrupt flag of channel */ +#define DMA_FLAG_FTF DMA_INTF_FTFIF /*!< full transfer finish flag of channel */ +#define DMA_FLAG_HTF DMA_INTF_HTFIF /*!< half transfer finish flag of channel */ +#define DMA_FLAG_ERR DMA_INTF_ERRIF /*!< error flag of channel */ + +/* DMA_CHxCTL register */ +/* interrupt enable bits */ +#define DMA_INT_FTF DMA_CHXCTL_FTFIE /*!< enable bit for channel full transfer finish interrupt */ +#define DMA_INT_HTF DMA_CHXCTL_HTFIE /*!< enable bit for channel half transfer finish interrupt */ +#define DMA_INT_ERR DMA_CHXCTL_ERRIE /*!< enable bit for channel error interrupt */ + +/* transfer direction */ +#define DMA_PERIPHERAL_TO_MEMORY ((uint32_t)0x00000000U) /*!< read from peripheral and write to memory */ +#define DMA_MEMORY_TO_PERIPHERAL ((uint32_t)0x00000001U) /*!< read from memory and write to peripheral */ +/* circular mode */ +#define DMA_CIRCULAR_MODE_DISABLE ((uint32_t)0x00000000U) /*!< circular mode disable */ +#define DMA_CIRCULAR_MODE_ENABLE ((uint32_t)0x00000001U) /*!< circular mode enable */ + +/* peripheral increasing mode */ +#define DMA_PERIPH_INCREASE_DISABLE ((uint32_t)0x00000000U) /*!< next address of peripheral is fixed address mode */ +#define DMA_PERIPH_INCREASE_ENABLE ((uint32_t)0x00000001U) /*!< next address of peripheral is increasing address mode */ + +/* memory increasing mode */ +#define DMA_MEMORY_INCREASE_DISABLE ((uint32_t)0x00000000U) /*!< next address of memory is fixed address mode */ +#define DMA_MEMORY_INCREASE_ENABLE ((uint32_t)0x00000001U) /*!< next address of memory is increasing address mode */ + +/* transfer data size of peripheral */ +#define CHCTL_PWIDTH(regval) (BITS(8,9) & ((regval) << 8)) /*!< transfer data size of peripheral */ +#define DMA_PERIPHERAL_WIDTH_8BIT CHCTL_PWIDTH(0U) /*!< transfer data size of peripheral is 8-bit */ +#define DMA_PERIPHERAL_WIDTH_16BIT CHCTL_PWIDTH(1U) /*!< transfer data size of peripheral is 16-bit */ +#define DMA_PERIPHERAL_WIDTH_32BIT CHCTL_PWIDTH(2U) /*!< transfer data size of peripheral is 32-bit */ + +/* transfer data size of memory */ +#define CHCTL_MWIDTH(regval) (BITS(10,11) & ((regval) << 10)) /*!< transfer data size of memory */ +#define DMA_MEMORY_WIDTH_8BIT CHCTL_MWIDTH(0U) /*!< transfer data size of memory is 8-bit */ +#define DMA_MEMORY_WIDTH_16BIT CHCTL_MWIDTH(1U) /*!< transfer data size of memory is 16-bit */ +#define DMA_MEMORY_WIDTH_32BIT CHCTL_MWIDTH(2U) /*!< transfer data size of memory is 32-bit */ + +/* channel priority level */ +#define CHCTL_PRIO(regval) (BITS(12,13) & ((regval) << 12)) /*!< DMA channel priority level */ +#define DMA_PRIORITY_LOW CHCTL_PRIO(0U) /*!< low priority */ +#define DMA_PRIORITY_MEDIUM CHCTL_PRIO(1U) /*!< medium priority */ +#define DMA_PRIORITY_HIGH CHCTL_PRIO(2U) /*!< high priority */ +#define DMA_PRIORITY_ULTRA_HIGH CHCTL_PRIO(3U) /*!< ultra high priority */ + +/* memory to memory mode */ +#define DMA_MEMORY_TO_MEMORY_DISABLE ((uint32_t)0x00000000U) /*!< disable memory to memory mode */ +#define DMA_MEMORY_TO_MEMORY_ENABLE ((uint32_t)0x00000001U) /*!< enable memory to memory mode */ + +/* DMA_CHxCNT register */ +/* transfer counter */ +#define DMA_CHANNEL_CNT_MASK DMA_CHXCNT_CNT /*!< transfer counter mask */ + +/* function declarations */ +/* DMA deinitialization and initialization functions */ +/* deinitialize DMA a channel registers */ +void dma_deinit(uint32_t dma_periph, dma_channel_enum channelx); +/* initialize the parameters of DMA struct with the default values */ +void dma_struct_para_init(dma_parameter_struct* init_struct); +/* initialize DMA channel */ +void dma_init(uint32_t dma_periph, dma_channel_enum channelx, dma_parameter_struct *init_struct); +/* enable DMA circulation mode */ +void dma_circulation_enable(uint32_t dma_periph, dma_channel_enum channelx); +/* disable DMA circulation mode */ +void dma_circulation_disable(uint32_t dma_periph, dma_channel_enum channelx); +/* enable memory to memory mode */ +void dma_memory_to_memory_enable(uint32_t dma_periph, dma_channel_enum channelx); +/* disable memory to memory mode */ +void dma_memory_to_memory_disable(uint32_t dma_periph, dma_channel_enum channelx); +/* enable DMA channel */ +void dma_channel_enable(uint32_t dma_periph, dma_channel_enum channelx); +/* disable DMA channel */ +void dma_channel_disable(uint32_t dma_periph, dma_channel_enum channelx); + +/* DMA configuration functions */ +/* set DMA peripheral base address */ +void dma_periph_address_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t address); +/* set DMA memory base address */ +void dma_memory_address_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t address); +/* set the number of remaining data to be transferred by the DMA */ +void dma_transfer_number_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t number); +/* get the number of remaining data to be transferred by the DMA */ +uint32_t dma_transfer_number_get(uint32_t dma_periph, dma_channel_enum channelx); +/* configure priority level of DMA channel */ +void dma_priority_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t priority); +/* configure transfer data size of memory */ +void dma_memory_width_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t mwidth); +/* configure transfer data size of peripheral */ +void dma_periph_width_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t pwidth); +/* enable next address increasement algorithm of memory */ +void dma_memory_increase_enable(uint32_t dma_periph, dma_channel_enum channelx); +/* disable next address increasement algorithm of memory */ +void dma_memory_increase_disable(uint32_t dma_periph, dma_channel_enum channelx); +/* enable next address increasement algorithm of peripheral */ +void dma_periph_increase_enable(uint32_t dma_periph, dma_channel_enum channelx); +/* disable next address increasement algorithm of peripheral */ +void dma_periph_increase_disable(uint32_t dma_periph, dma_channel_enum channelx); +/* configure the direction of data transfer on the channel */ +void dma_transfer_direction_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t direction); + +/* flag and interrupt functions */ +/* check DMA flag is set or not */ +FlagStatus dma_flag_get(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag); +/* clear the flag of a DMA channel */ +void dma_flag_clear(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag); +/* check DMA flag and interrupt enable bit is set or not */ +FlagStatus dma_interrupt_flag_get(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag); +/* clear the interrupt flag of a DMA channel */ +void dma_interrupt_flag_clear(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag); +/* enable DMA interrupt */ +void dma_interrupt_enable(uint32_t dma_periph, dma_channel_enum channelx, uint32_t source); +/* disable DMA interrupt */ +void dma_interrupt_disable(uint32_t dma_periph, dma_channel_enum channelx, uint32_t source); + +#endif /* GD32F10X_DMA_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_enet.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_enet.h new file mode 100644 index 0000000000000000000000000000000000000000..310fb2f8d80bfe87fe804ebbc6929a5fbeea3f2a --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_enet.h @@ -0,0 +1,1498 @@ +/*! + \file gd32f10x_enet.h + \brief definitions for the ENET + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10x_ENET_H +#define GD32F10x_ENET_H + +#include "gd32f10x.h" +#include + +#define IF_USE_EXTERNPHY_LIB 0 +#if (1 == IF_USE_EXTERNPHY_LIB) +#include "phy.h" +#endif + +#ifndef ENET_RXBUF_NUM +#define ENET_RXBUF_NUM 5U /*!< ethernet Rx DMA descriptor number */ +#endif + +#ifndef ENET_TXBUF_NUM +#define ENET_TXBUF_NUM 5U /*!< ethernet Tx DMA descriptor number */ +#endif + +#ifndef ENET_RXBUF_SIZE +#define ENET_RXBUF_SIZE ENET_MAX_FRAME_SIZE /*!< ethernet receive buffer size */ +#endif + +#ifndef ENET_TXBUF_SIZE +#define ENET_TXBUF_SIZE ENET_MAX_FRAME_SIZE /*!< ethernet transmit buffer size */ +#endif + +/* #define USE_DELAY */ + +#ifndef _PHY_H_ +#define DP83848 0 +#define LAN8700 1 +#define PHY_TYPE DP83848 + +#define PHY_ADDRESS ((uint16_t)1U) /*!< phy address determined by the hardware */ + +/* PHY read write timeouts */ +#define PHY_READ_TO ((uint32_t)0x0004FFFFU) /*!< PHY read timeout */ +#define PHY_WRITE_TO ((uint32_t)0x0004FFFFU) /*!< PHY write timeout */ + +/* PHY delay */ +#define PHY_RESETDELAY ((uint32_t)0x008FFFFFU) /*!< PHY reset delay */ +#define PHY_CONFIGDELAY ((uint32_t)0x00FFFFFFU) /*!< PHY configure delay */ + +/* PHY register address */ +#define PHY_REG_BCR 0U /*!< tranceiver basic control register */ +#define PHY_REG_BSR 1U /*!< tranceiver basic status register */ + +/* PHY basic control register */ +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< enable phy loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< configure speed to 100 Mbit/s and the full-duplex mode */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< configure speed to 100 Mbit/s and the half-duplex mode */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< configure speed to 10 Mbit/s and the full-duplex mode */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< configure speed to 10 Mbit/s and the half-duplex mode */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< enable the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< isolate PHY from MII */ + +/* PHY basic status register */ +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< auto-negotioation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< jabber condition detected */ + +#if(PHY_TYPE == LAN8700) +#define PHY_SR 31U /*!< tranceiver status register */ +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< configured information of speed: 10Mbit/s */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< configured information of duplex: full-duplex */ +#elif(PHY_TYPE == DP83848) +#define PHY_SR 16U /*!< tranceiver status register */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< configured information of speed: 10Mbit/s */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< configured information of duplex: full-duplex */ +#endif /* PHY_TYPE */ + +#endif /* _PHY_H_ */ + + +/* ENET definitions */ +#define ENET ENET_BASE + +/* registers definitions */ +#define ENET_MAC_CFG REG32((ENET) + 0x00U) /*!< ethernet MAC configuration register */ +#define ENET_MAC_FRMF REG32((ENET) + 0x04U) /*!< ethernet MAC frame filter register */ +#define ENET_MAC_HLH REG32((ENET) + 0x08U) /*!< ethernet MAC hash list high register */ +#define ENET_MAC_HLL REG32((ENET) + 0x0CU) /*!< ethernet MAC hash list low register */ +#define ENET_MAC_PHY_CTL REG32((ENET) + 0x10U) /*!< ethernet MAC PHY control register */ +#define ENET_MAC_PHY_DATA REG32((ENET) + 0x14U) /*!< ethernet MAC MII data register */ +#define ENET_MAC_FCTL REG32((ENET) + 0x18U) /*!< ethernet MAC flow control register */ +#define ENET_MAC_FCTH REG32((ENET) + 0x1080U) /*!< ethernet MAC flow control threshold register */ +#define ENET_MAC_VLT REG32((ENET) + 0x1CU) /*!< ethernet MAC VLAN tag register */ +#define ENET_MAC_RWFF REG32((ENET) + 0x28U) /*!< ethernet MAC remote wakeup frame filter register */ +#define ENET_MAC_WUM REG32((ENET) + 0x2CU) /*!< ethernet MAC wakeup management register */ +#define ENET_MAC_INTF REG32((ENET) + 0x38U) /*!< ethernet MAC interrupt flag register */ +#define ENET_MAC_INTMSK REG32((ENET) + 0x3CU) /*!< ethernet MAC interrupt mask register */ +#define ENET_MAC_ADDR0H REG32((ENET) + 0x40U) /*!< ethernet MAC address 0 high register */ +#define ENET_MAC_ADDR0L REG32((ENET) + 0x44U) /*!< ethernet MAC address 0 low register */ +#define ENET_MAC_ADDR1H REG32((ENET) + 0x48U) /*!< ethernet MAC address 1 high register */ +#define ENET_MAC_ADDR1L REG32((ENET) + 0x4CU) /*!< ethernet MAC address 1 low register */ +#define ENET_MAC_ADDT2H REG32((ENET) + 0x50U) /*!< ethernet MAC address 2 high register */ +#define ENET_MAC_ADDR2L REG32((ENET) + 0x54U) /*!< ethernet MAC address 2 low register */ +#define ENET_MAC_ADDR3H REG32((ENET) + 0x58U) /*!< ethernet MAC address 3 high register */ +#define ENET_MAC_ADDR3L REG32((ENET) + 0x5CU) /*!< ethernet MAC address 3 low register */ + +#define ENET_MSC_CTL REG32((ENET) + 0x100U) /*!< ethernet MSC control register */ +#define ENET_MSC_RINTF REG32((ENET) + 0x104U) /*!< ethernet MSC receive interrupt flag register */ +#define ENET_MSC_TINTF REG32((ENET) + 0x108U) /*!< ethernet MSC transmit interrupt flag register */ +#define ENET_MSC_RINTMSK REG32((ENET) + 0x10CU) /*!< ethernet MSC receive interrupt mask register */ +#define ENET_MSC_TINTMSK REG32((ENET) + 0x110U) /*!< ethernet MSC transmit interrupt mask register */ +#define ENET_MSC_SCCNT REG32((ENET) + 0x14CU) /*!< ethernet MSC transmitted good frames after a single collision counter register */ +#define ENET_MSC_MSCCNT REG32((ENET) + 0x150U) /*!< ethernet MSC transmitted good frames after more than a single collision counter register */ +#define ENET_MSC_TGFCNT REG32((ENET) + 0x168U) /*!< ethernet MSC transmitted good frames counter register */ +#define ENET_MSC_RFCECNT REG32((ENET) + 0x194U) /*!< ethernet MSC received frames with CRC error counter register */ +#define ENET_MSC_RFAECNT REG32((ENET) + 0x198U) /*!< ethernet MSC received frames with alignment error counter register */ +#define ENET_MSC_RGUFCNT REG32((ENET) + 0x1C4U) /*!< ethernet MSC received good unicast frames counter register */ + +#define ENET_PTP_TSCTL REG32((ENET) + 0x700U) /*!< ethernet PTP time stamp control register */ +#define ENET_PTP_SSINC REG32((ENET) + 0x704U) /*!< ethernet PTP subsecond increment register */ +#define ENET_PTP_TSH REG32((ENET) + 0x708U) /*!< ethernet PTP time stamp high register */ +#define ENET_PTP_TSL REG32((ENET) + 0x70CU) /*!< ethernet PTP time stamp low register */ +#define ENET_PTP_TSUH REG32((ENET) + 0x710U) /*!< ethernet PTP time stamp update high register */ +#define ENET_PTP_TSUL REG32((ENET) + 0x714U) /*!< ethernet PTP time stamp update low register */ +#define ENET_PTP_TSADDEND REG32((ENET) + 0x718U) /*!< ethernet PTP time stamp addend register */ +#define ENET_PTP_ETH REG32((ENET) + 0x71CU) /*!< ethernet PTP expected time high register */ +#define ENET_PTP_ETL REG32((ENET) + 0x720U) /*!< ethernet PTP expected time low register */ + +#define ENET_DMA_BCTL REG32((ENET) + 0x1000U) /*!< ethernet DMA bus control register */ +#define ENET_DMA_TPEN REG32((ENET) + 0x1004U) /*!< ethernet DMA transmit poll enable register */ +#define ENET_DMA_RPEN REG32((ENET) + 0x1008U) /*!< ethernet DMA receive poll enable register */ +#define ENET_DMA_RDTADDR REG32((ENET) + 0x100CU) /*!< ethernet DMA receive descriptor table address register */ +#define ENET_DMA_TDTADDR REG32((ENET) + 0x1010U) /*!< ethernet DMA transmit descriptor table address register */ +#define ENET_DMA_STAT REG32((ENET) + 0x1014U) /*!< ethernet DMA status register */ +#define ENET_DMA_CTL REG32((ENET) + 0x1018U) /*!< ethernet DMA control register */ +#define ENET_DMA_INTEN REG32((ENET) + 0x101CU) /*!< ethernet DMA interrupt enable register */ +#define ENET_DMA_MFBOCNT REG32((ENET) + 0x1020U) /*!< ethernet DMA missed frame and buffer overflow counter register */ +#define ENET_DMA_CTDADDR REG32((ENET) + 0x1048U) /*!< ethernet DMA current transmit descriptor address register */ +#define ENET_DMA_CRDADDR REG32((ENET) + 0x104CU) /*!< ethernet DMA current receive descriptor address register */ +#define ENET_DMA_CTBADDR REG32((ENET) + 0x1050U) /*!< ethernet DMA current transmit buffer address register */ +#define ENET_DMA_CRBADDR REG32((ENET) + 0x1054U) /*!< ethernet DMA current receive buffer address register */ + +/* bits definitions */ +/* ENET_MAC_CFG */ +#define ENET_MAC_CFG_REN BIT(2) /*!< receiver enable */ +#define ENET_MAC_CFG_TEN BIT(3) /*!< transmitter enable */ +#define ENET_MAC_CFG_DFC BIT(4) /*!< defferal check */ +#define ENET_MAC_CFG_BOL BITS(5,6) /*!< back-off limit */ +#define ENET_MAC_CFG_APCD BIT(7) /*!< automatic pad/CRC drop */ +#define ENET_MAC_CFG_RTD BIT(9) /*!< retry disable */ +#define ENET_MAC_CFG_IPFCO BIT(10) /*!< IP frame checksum offload */ +#define ENET_MAC_CFG_DPM BIT(11) /*!< duplex mode */ +#define ENET_MAC_CFG_LBM BIT(12) /*!< loopback mode */ +#define ENET_MAC_CFG_ROD BIT(13) /*!< receive own disable */ +#define ENET_MAC_CFG_SPD BIT(14) /*!< fast eneternet speed */ +#define ENET_MAC_CFG_CSD BIT(16) /*!< carrier sense disable */ +#define ENET_MAC_CFG_IGBS BITS(17,19) /*!< inter-frame gap bit selection */ +#define ENET_MAC_CFG_JBD BIT(22) /*!< jabber disable */ +#define ENET_MAC_CFG_WDD BIT(23) /*!< watchdog disable */ + +/* ENET_MAC_FRMF */ +#define ENET_MAC_FRMF_PM BIT(0) /*!< promiscuous mode */ +#define ENET_MAC_FRMF_HUF BIT(1) /*!< hash unicast filter */ +#define ENET_MAC_FRMF_HMF BIT(2) /*!< hash multicast filter */ +#define ENET_MAC_FRMF_DAIFLT BIT(3) /*!< destination address inverse filtering enable */ +#define ENET_MAC_FRMF_MFD BIT(4) /*!< multicast filter disable */ +#define ENET_MAC_FRMF_BFRMD BIT(5) /*!< broadcast frame disable */ +#define ENET_MAC_FRMF_PCFRM BITS(6,7) /*!< pass control frames */ +#define ENET_MAC_FRMF_SAIFLT BIT(8) /*!< source address inverse filtering */ +#define ENET_MAC_FRMF_SAFLT BIT(9) /*!< source address filter */ +#define ENET_MAC_FRMF_HPFLT BIT(10) /*!< hash or perfect filter */ +#define ENET_MAC_FRMF_FAR BIT(31) /*!< frames all receive */ + +/* ENET_MAC_HLH */ +#define ENET_MAC_HLH_HLH BITS(0,31) /*!< hash list high */ + +/* ENET_MAC_HLL */ +#define ENET_MAC_HLL_HLL BITS(0,31) /*!< hash list low */ + +/* ENET_MAC_PHY_CTL */ +#define ENET_MAC_PHY_CTL_PB BIT(0) /*!< PHY busy */ +#define ENET_MAC_PHY_CTL_PW BIT(1) /*!< PHY write */ +#define ENET_MAC_PHY_CTL_CLR BITS(2,4) /*!< clock range */ +#define ENET_MAC_PHY_CTL_PR BITS(6,10) /*!< PHY register */ +#define ENET_MAC_PHY_CTL_PA BITS(11,15) /*!< PHY address */ + +/* ENET_MAC_PHY_DATA */ +#define ENET_MAC_PHY_DATA_PD BITS(0,15) /*!< PHY data */ + +/* ENET_MAC_FCTL */ +#define ENET_MAC_FCTL_FLCBBKPA BIT(0) /*!< flow control busy(in full duplex mode)/backpressure activate(in half duplex mode) */ +#define ENET_MAC_FCTL_TFCEN BIT(1) /*!< transmit flow control enable */ +#define ENET_MAC_FCTL_RFCEN BIT(2) /*!< receive flow control enable */ +#define ENET_MAC_FCTL_UPFDT BIT(3) /*!< unicast pause frame detect */ +#define ENET_MAC_FCTL_PLTS BITS(4,5) /*!< pause low threshold */ +#define ENET_MAC_FCTL_DZQP BIT(7) /*!< disable zero-quanta pause */ +#define ENET_MAC_FCTL_PTM BITS(16,31) /*!< pause time */ + +/* ENET_MAC_FCTH */ +#define ENET_MAC_FCTH_RFA BITS(0,2) /*!< threshold of active flow control */ +#define ENET_MAC_FCTH_RFD BITS(4,6) /*!< threshold of deactive flow control */ + +/* ENET_MAC_VLT */ +#define ENET_MAC_VLT_VLTI BITS(0,15) /*!< VLAN tag identifier(for receive frames) */ +#define ENET_MAC_VLT_VLTC BIT(16) /*!< 12-bit VLAN tag comparison */ + +/* ENET_MAC_RWFF */ +#define ENET_MAC_RWFF_DATA BITS(0,31) /*!< wakeup frame filter register data */ + +/* ENET_MAC_WUM */ +#define ENET_MAC_WUM_PWD BIT(0) /*!< power down */ +#define ENET_MAC_WUM_MPEN BIT(1) /*!< magic packet enable */ +#define ENET_MAC_WUM_WFEN BIT(2) /*!< wakeup frame enable */ +#define ENET_MAC_WUM_MPKR BIT(5) /*!< magic packet received */ +#define ENET_MAC_WUM_WUFR BIT(6) /*!< wakeup frame received */ +#define ENET_MAC_WUM_GU BIT(9) /*!< global unicast */ +#define ENET_MAC_WUM_WUFFRPR BIT(31) /*!< wakeup frame filter register pointer reset */ + +/* ENET_MAC_INTF */ +#define ENET_MAC_INTF_WUM BIT(3) /*!< WUM status */ +#define ENET_MAC_INTF_MSC BIT(4) /*!< MSC status */ +#define ENET_MAC_INTF_MSCR BIT(5) /*!< MSC receive status */ +#define ENET_MAC_INTF_MSCT BIT(6) /*!< MSC transmit status */ +#define ENET_MAC_INTF_TMST BIT(9) /*!< timestamp trigger status */ + +/* ENET_MAC_INTMSK */ +#define ENET_MAC_INTMSK_WUMIM BIT(3) /*!< WUM interrupt mask */ +#define ENET_MAC_INTMSK_TMSTIM BIT(9) /*!< timestamp trigger interrupt mask */ + +/* ENET_MAC_ADDR0H */ +#define ENET_MAC_ADDR0H_ADDR0H BITS(0,15) /*!< MAC address0 high */ +#define ENET_MAC_ADDR0H_MO BIT(31) /*!< always read 1 and must be kept */ + +/* ENET_MAC_ADDR0L */ +#define ENET_MAC_ADDR0L_ADDR0L BITS(0,31) /*!< MAC address0 low */ + +/* ENET_MAC_ADDR1H */ +#define ENET_MAC_ADDR1H_ADDR1H BITS(0,15) /*!< MAC address1 high */ +#define ENET_MAC_ADDR1H_MB BITS(24,29) /*!< mask byte */ +#define ENET_MAC_ADDR1H_SAF BIT(30) /*!< source address filter */ +#define ENET_MAC_ADDR1H_AFE BIT(31) /*!< address filter enable */ + +/* ENET_MAC_ADDR1L */ +#define ENET_MAC_ADDR1L_ADDR1L BITS(0,31) /*!< MAC address1 low */ + +/* ENET_MAC_ADDR2H */ +#define ENET_MAC_ADDR2H_ADDR2H BITS(0,15) /*!< MAC address2 high */ +#define ENET_MAC_ADDR2H_MB BITS(24,29) /*!< mask byte */ +#define ENET_MAC_ADDR2H_SAF BIT(30) /*!< source address filter */ +#define ENET_MAC_ADDR2H_AFE BIT(31) /*!< address filter enable */ + +/* ENET_MAC_ADDR2L */ +#define ENET_MAC_ADDR2L_ADDR2L BITS(0,31) /*!< MAC address2 low */ + +/* ENET_MAC_ADDR3H */ +#define ENET_MAC_ADDR3H_ADDR3H BITS(0,15) /*!< MAC address3 high */ +#define ENET_MAC_ADDR3H_MB BITS(24,29) /*!< mask byte */ +#define ENET_MAC_ADDR3H_SAF BIT(30) /*!< source address filter */ +#define ENET_MAC_ADDR3H_AFE BIT(31) /*!< address filter enable */ + +/* ENET_MAC_ADDR3L */ +#define ENET_MAC_ADDR3L_ADDR3L BITS(0,31) /*!< MAC address3 low */ + +/* ENET_MSC_CTL */ +#define ENET_MSC_CTL_CTR BIT(0) /*!< counter reset */ +#define ENET_MSC_CTL_CTSR BIT(1) /*!< counter stop rollover */ +#define ENET_MSC_CTL_RTOR BIT(2) /*!< reset on read */ +#define ENET_MSC_CTL_MCFZ BIT(3) /*!< MSC counter freeze */ + +/* ENET_MSC_RINTF */ +#define ENET_MSC_RINTF_RFCE BIT(5) /*!< received frames CRC error */ +#define ENET_MSC_RINTF_RFAE BIT(6) /*!< received frames alignment error */ +#define ENET_MSC_RINTF_RGUF BIT(17) /*!< receive good unicast frames */ + +/* ENET_MSC_TINTF */ +#define ENET_MSC_TINTF_TGFSC BIT(14) /*!< transmitted good frames single collision */ +#define ENET_MSC_TINTF_TGFMSC BIT(15) /*!< transmitted good frames more single collision */ +#define ENET_MSC_TINTF_TGF BIT(21) /*!< transmitted good frames */ + +/* ENET_MSC_RINTMSK */ +#define ENET_MSC_RINTMSK_RFCEIM BIT(5) /*!< received frame CRC error interrupt mask */ +#define ENET_MSC_RINTMSK_RFAEIM BIT(6) /*!< received frames alignment error interrupt mask */ +#define ENET_MSC_RINTMSK_RGUFIM BIT(17) /*!< received good unicast frames interrupt mask */ + +/* ENET_MSC_TINTMSK */ +#define ENET_MSC_TINTMSK_TGFSCIM BIT(14) /*!< transmitted good frames single collision interrupt mask */ +#define ENET_MSC_TINTMSK_TGFMSCIM BIT(15) /*!< transmitted good frames more single collision interrupt mask */ +#define ENET_MSC_TINTMSK_TGFIM BIT(21) /*!< transmitted good frames interrupt mask */ + +/* ENET_MSC_SCCNT */ +#define ENET_MSC_SCCNT_SCC BITS(0,31) /*!< transmitted good frames single collision counter */ + +/* ENET_MSC_MSCCNT */ +#define ENET_MSC_MSCCNT_MSCC BITS(0,31) /*!< transmitted good frames more one single collision counter */ + +/* ENET_MSC_TGFCNT */ +#define ENET_MSC_TGFCNT_TGF BITS(0,31) /*!< transmitted good frames counter */ + +/* ENET_MSC_RFCECNT */ +#define ENET_MSC_RFCECNT_RFCER BITS(0,31) /*!< received frames with CRC error counter */ + +/* ENET_MSC_RFAECNT */ +#define ENET_MSC_RFAECNT_RFAER BITS(0,31) /*!< received frames alignment error counter */ + +/* ENET_MSC_RGUFCNT */ +#define ENET_MSC_RGUFCNT_RGUF BITS(0,31) /*!< received good unicast frames counter */ + +/* ENET_PTP_TSCTL */ +#define ENET_PTP_TSCTL_TMSEN BIT(0) /*!< timestamp enable */ +#define ENET_PTP_TSCTL_TMSFCU BIT(1) /*!< timestamp fine or coarse update */ +#define ENET_PTP_TSCTL_TMSSTI BIT(2) /*!< timestamp system time initialize */ +#define ENET_PTP_TSCTL_TMSSTU BIT(3) /*!< timestamp system time update */ +#define ENET_PTP_TSCTL_TMSITEN BIT(4) /*!< timestamp interrupt trigger enable */ +#define ENET_PTP_TSCTL_TMSARU BIT(5) /*!< timestamp addend register update */ + +/* ENET_PTP_SSINC */ +#define ENET_PTP_SSINC_STMSSI BITS(0,7) /*!< system time subsecond increment */ + +/* ENET_PTP_TSH */ +#define ENET_PTP_TSH_STMS BITS(0,31) /*!< system time second */ + +/* ENET_PTP_TSL */ +#define ENET_PTP_TSL_STMSS BITS(0,30) /*!< system time subseconds */ +#define ENET_PTP_TSL_STS BIT(31) /*!< system time sign */ + +/* ENET_PTP_TSUH */ +#define ENET_PTP_TSUH_TMSUS BITS(0,31) /*!< timestamp update seconds */ + +/* ENET_PTP_TSUL */ +#define ENET_PTP_TSUL_TMSUSS BITS(0,30) /*!< timestamp update subseconds */ +#define ENET_PTP_TSUL_TMSUPNS BIT(31) /*!< timestamp update positive or negative sign */ + +/* ENET_PTP_TSADDEND */ +#define ENET_PTP_TSADDEND_TMSA BITS(0,31) /*!< timestamp addend */ + +/* ENET_PTP_ETH */ +#define ENET_PTP_ETH_ETSH BITS(0,31) /*!< expected time high */ + +/* ENET_PTP_ETL */ +#define ENET_PTP_ETL_ETSL BITS(0,31) /*!< expected time low */ + +/* ENET_DMA_BCTL */ +#define ENET_DMA_BCTL_SWR BIT(0) /*!< software reset */ +#define ENET_DMA_BCTL_DAB BIT(1) /*!< DMA arbitration */ +#define ENET_DMA_BCTL_DPSL BITS(2,6) /*!< descriptor skip length */ +#define ENET_DMA_BCTL_PGBL BITS(8,13) /*!< programmable burst length */ +#define ENET_DMA_BCTL_RTPR BITS(14,15) /*!< RxDMA and TxDMA transfer priority ratio */ +#define ENET_DMA_BCTL_FB BIT(16) /*!< fixed Burst */ +#define ENET_DMA_BCTL_RXDP BITS(17,22) /*!< RxDMA PGBL */ +#define ENET_DMA_BCTL_UIP BIT(23) /*!< use independent PGBL */ +#define ENET_DMA_BCTL_FPBL BIT(24) /*!< four times PGBL mode */ +#define ENET_DMA_BCTL_AA BIT(25) /*!< address-aligned */ + +/* ENET_DMA_TPEN */ +#define ENET_DMA_TPEN_TPE BITS(0,31) /*!< transmit poll enable */ + +/* ENET_DMA_RPEN */ +#define ENET_DMA_RPEN_RPE BITS(0,31) /*!< receive poll enable */ + +/* ENET_DMA_RDTADDR */ +#define ENET_DMA_RDTADDR_SRT BITS(0,31) /*!< start address of receive table */ + +/* ENET_DMA_TDTADDR */ +#define ENET_DMA_TDTADDR_STT BITS(0,31) /*!< start address of transmit table */ + +/* ENET_DMA_STAT */ +#define ENET_DMA_STAT_TS BIT(0) /*!< transmit status */ +#define ENET_DMA_STAT_TPS BIT(1) /*!< transmit process stopped status */ +#define ENET_DMA_STAT_TBU BIT(2) /*!< transmit buffer unavailable status */ +#define ENET_DMA_STAT_TJT BIT(3) /*!< transmit jabber timeout status */ +#define ENET_DMA_STAT_RO BIT(4) /*!< receive overflow status */ +#define ENET_DMA_STAT_TU BIT(5) /*!< transmit underflow status */ +#define ENET_DMA_STAT_RS BIT(6) /*!< receive status */ +#define ENET_DMA_STAT_RBU BIT(7) /*!< receive buffer unavailable status */ +#define ENET_DMA_STAT_RPS BIT(8) /*!< receive process stopped status */ +#define ENET_DMA_STAT_RWT BIT(9) /*!< receive watchdog timeout status */ +#define ENET_DMA_STAT_ET BIT(10) /*!< early transmit status */ +#define ENET_DMA_STAT_FBE BIT(13) /*!< fatal bus error status */ +#define ENET_DMA_STAT_ER BIT(14) /*!< early receive status */ +#define ENET_DMA_STAT_AI BIT(15) /*!< abnormal interrupt summary */ +#define ENET_DMA_STAT_NI BIT(16) /*!< normal interrupt summary */ +#define ENET_DMA_STAT_RP BITS(17,19) /*!< receive process state */ +#define ENET_DMA_STAT_TP BITS(20,22) /*!< transmit process state */ +#define ENET_DMA_STAT_EB BITS(23,25) /*!< error bits status */ +#define ENET_DMA_STAT_MSC BIT(27) /*!< MSC status */ +#define ENET_DMA_STAT_WUM BIT(28) /*!< WUM status */ +#define ENET_DMA_STAT_TST BIT(29) /*!< timestamp trigger status */ + +/* ENET_DMA_CTL */ +#define ENET_DMA_CTL_SRE BIT(1) /*!< start/stop receive enable */ +#define ENET_DMA_CTL_OSF BIT(2) /*!< operate on second frame */ +#define ENET_DMA_CTL_RTHC BITS(3,4) /*!< receive threshold control */ +#define ENET_DMA_CTL_FUF BIT(6) /*!< forward undersized good frames */ +#define ENET_DMA_CTL_FERF BIT(7) /*!< forward error frames */ +#define ENET_DMA_CTL_STE BIT(13) /*!< start/stop transmission enable */ +#define ENET_DMA_CTL_TTHC BITS(14,16) /*!< transmit threshold control */ +#define ENET_DMA_CTL_FTF BIT(20) /*!< flush transmit FIFO */ +#define ENET_DMA_CTL_TSFD BIT(21) /*!< transmit store-and-forward */ +#define ENET_DMA_CTL_DAFRF BIT(24) /*!< disable flushing of received frames */ +#define ENET_DMA_CTL_RSFD BIT(25) /*!< receive store-and-forward */ +#define ENET_DMA_CTL_DTCERFD BIT(26) /*!< dropping of TCP/IP checksum error frames disable */ + +/* ENET_DMA_INTEN */ +#define ENET_DMA_INTEN_TIE BIT(0) /*!< transmit interrupt enable */ +#define ENET_DMA_INTEN_TPSIE BIT(1) /*!< transmit process stopped interrupt enable */ +#define ENET_DMA_INTEN_TBUIE BIT(2) /*!< transmit buffer unavailable interrupt enable */ +#define ENET_DMA_INTEN_TJTIE BIT(3) /*!< transmit jabber timeout interrupt enable */ +#define ENET_DMA_INTEN_ROIE BIT(4) /*!< receive overflow interrupt enable */ +#define ENET_DMA_INTEN_TUIE BIT(5) /*!< transmit underflow interrupt enable */ +#define ENET_DMA_INTEN_RIE BIT(6) /*!< receive interrupt enable */ +#define ENET_DMA_INTEN_RBUIE BIT(7) /*!< receive buffer unavailable interrupt enable */ +#define ENET_DMA_INTEN_RPSIE BIT(8) /*!< receive process stopped interrupt enable */ +#define ENET_DMA_INTEN_RWTIE BIT(9) /*!< receive watchdog timeout interrupt enable */ +#define ENET_DMA_INTEN_ETIE BIT(10) /*!< early transmit interrupt enable */ +#define ENET_DMA_INTEN_FBEIE BIT(13) /*!< fatal bus error interrupt enable */ +#define ENET_DMA_INTEN_ERIE BIT(14) /*!< early receive interrupt enable */ +#define ENET_DMA_INTEN_AIE BIT(15) /*!< abnormal interrupt summary enable */ +#define ENET_DMA_INTEN_NIE BIT(16) /*!< normal interrupt summary enable */ + +/* ENET_DMA_MFBOCNT */ +#define ENET_DMA_MFBOCNT_MSFC BITS(0,15) /*!< missed frames by the controller */ +#define ENET_DMA_MFBOCNT_OBMFC BIT(16) /* Overflow bit for missed frame counter */ +#define ENET_DMA_MFBOCNT_MSFA BITS(17,27) /*!< missed frames by the application */ +#define ENET_DMA_MFBOCNT_OBFOC BIT(28) /*!< Overflow bit for FIFO overflow counter */ + +/* ENET_DMA_CTDADDR */ +#define ENET_DMA_CTDADDR_TDAP BITS(0,31) /*!< transmit descriptor address pointer */ + +/* ENET_DMA_CRDADDR */ +#define ENET_DMA_CRDADDR_RDAP BITS(0,31) /*!< receive descriptor address pointer */ + +/* ENET_DMA_CTBADDR */ +#define ENET_DMA_CTBADDR_TBAP BITS(0,31) /*!< transmit buffer address pointer */ + +/* ENET_DMA_CRBADDR */ +#define ENET_DMA_CRBADDR_RBAP BITS(0,31) /*!< receive buffer address pointer */ + +/* ENET DMA Tx descriptor TDES0 */ +#define ENET_TDES0_DB BIT(0) /*!< deferred */ +#define ENET_TDES0_UFE BIT(1) /*!< underflow error */ +#define ENET_TDES0_EXD BIT(2) /*!< excessive deferral */ +#define ENET_TDES0_COCNT BITS(3,6) /*!< collision count */ +#define ENET_TDES0_VFRM BIT(7) /*!< VLAN frame */ +#define ENET_TDES0_ECO BIT(8) /*!< excessive collision */ +#define ENET_TDES0_LCO BIT(9) /*!< late collision */ +#define ENET_TDES0_NCA BIT(10) /*!< no carrier */ +#define ENET_TDES0_LCA BIT(11) /*!< loss of carrier */ +#define ENET_TDES0_IPPE BIT(12) /*!< IP payload error */ +#define ENET_TDES0_FRMF BIT(13) /*!< frame flushed */ +#define ENET_TDES0_JT BIT(14) /*!< jabber timeout */ +#define ENET_TDES0_ES BIT(15) /*!< error summary */ +#define ENET_TDES0_IPHE BIT(16) /*!< IP header error */ +#define ENET_TDES0_TTMSS BIT(17) /*!< transmit timestamp status */ +#define ENET_TDES0_TCHM BIT(20) /*!< the second address chained mode */ +#define ENET_TDES0_TERM BIT(21) /*!< transmit end of ring mode*/ +#define ENET_TDES0_CM BITS(22,23) /*!< checksum mode */ +#define ENET_TDES0_TTSEN BIT(25) /*!< transmit timestamp function enable */ +#define ENET_TDES0_DPAD BIT(26) /*!< disable adding pad */ +#define ENET_TDES0_DCRC BIT(27) /*!< disable CRC */ +#define ENET_TDES0_FSG BIT(28) /*!< first segment */ +#define ENET_TDES0_LSG BIT(29) /*!< last segment */ +#define ENET_TDES0_INTC BIT(30) /*!< interrupt on completion */ +#define ENET_TDES0_DAV BIT(31) /*!< DAV bit */ + +/* ENET DMA Tx descriptor TDES1 */ +#define ENET_TDES1_TB1S BITS(0,12) /*!< transmit buffer 1 size */ +#define ENET_TDES1_TB2S BITS(16,28) /*!< transmit buffer 2 size */ + +/* ENET DMA Tx descriptor TDES2 */ +#define ENET_TDES2_TB1AP BITS(0,31) /*!< transmit buffer 1 address pointer/transmit frame timestamp low 32-bit value */ + +/* ENET DMA Tx descriptor TDES3 */ +#define ENET_TDES3_TB2AP BITS(0,31) /*!< transmit buffer 2 address pointer (or next descriptor address) / transmit frame timestamp high 32-bit value */ + +/* ENET DMA Rx descriptor RDES0 */ +#define ENET_RDES0_PCERR BIT(0) /*!< payload checksum error */ +#define ENET_RDES0_CERR BIT(1) /*!< CRC error */ +#define ENET_RDES0_DBERR BIT(2) /*!< dribble bit error */ +#define ENET_RDES0_RERR BIT(3) /*!< receive error */ +#define ENET_RDES0_RWDT BIT(4) /*!< receive watchdog timeout */ +#define ENET_RDES0_FRMT BIT(5) /*!< frame type */ +#define ENET_RDES0_LCO BIT(6) /*!< late collision */ +#define ENET_RDES0_IPHERR BIT(7) /*!< IP frame header error */ +#define ENET_RDES0_LDES BIT(8) /*!< last descriptor */ +#define ENET_RDES0_FDES BIT(9) /*!< first descriptor */ +#define ENET_RDES0_VTAG BIT(10) /*!< VLAN tag */ +#define ENET_RDES0_OERR BIT(11) /*!< overflow Error */ +#define ENET_RDES0_LERR BIT(12) /*!< length error */ +#define ENET_RDES0_SAFF BIT(13) /*!< SA filter fail */ +#define ENET_RDES0_DERR BIT(14) /*!< descriptor error */ +#define ENET_RDES0_ERRS BIT(15) /*!< error summary */ +#define ENET_RDES0_FRML BITS(16,29) /*!< frame length */ +#define ENET_RDES0_DAFF BIT(30) /*!< destination address filter fail */ +#define ENET_RDES0_DAV BIT(31) /*!< descriptor available */ + +/* ENET DMA Rx descriptor RDES1 */ +#define ENET_RDES1_RB1S BITS(0,12) /*!< receive buffer 1 size */ +#define ENET_RDES1_RCHM BIT(14) /*!< receive chained mode for second address */ +#define ENET_RDES1_RERM BIT(15) /*!< receive end of ring mode*/ +#define ENET_RDES1_RB2S BITS(16,28) /*!< receive buffer 2 size */ +#define ENET_RDES1_DINTC BIT(31) /*!< disable interrupt on completion */ + +/* ENET DMA Rx descriptor RDES2 */ +#define ENET_RDES2_RB1AP BITS(0,31) /*!< receive buffer 1 address pointer / receive frame timestamp low 32-bit */ + +/* ENET DMA Rx descriptor RDES3 */ +#define ENET_RDES3_RB2AP BITS(0,31) /*!< receive buffer 2 address pointer (next descriptor address)/receive frame timestamp high 32-bit value */ + +/* constants definitions */ +/* define bit position and its register index offset */ +#define ENET_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)) +#define ENET_REG_VAL(periph) (REG32(ENET + ((uint32_t)(periph)>>6))) +#define ENET_BIT_POS(val) ((uint32_t)(val) & 0x1FU) + +/* ENET clock range judgement */ +#define ENET_RANGE(hclk, n, m) (((hclk) >= (n))&&((hclk) < (m))) + +/* define MAC address configuration and reference address */ +#define ENET_SET_MACADDRH(p) (((uint32_t)(p)[5] << 8) | (uint32_t)(p)[4]) +#define ENET_SET_MACADDRL(p) (((uint32_t)(p)[3] << 24) | ((uint32_t)(p)[2] << 16) | ((uint32_t)(p)[1] << 8) | (uint32_t)(p)[0]) +#define ENET_ADDRH_BASE ((ENET) + 0x40U) +#define ENET_ADDRL_BASE ((ENET) + 0x44U) +#define ENET_GET_MACADDR(offset, n) ((uint8_t)((REG32((ENET_ADDRL_BASE + (offset)) - (((n) / 4U) * 4U)) >> (8U * ((n) % 4U))) & 0xFFU)) + +/* register offset */ +#define MAC_FCTL_REG_OFFSET 0x0018U /*!< MAC flow control register offset */ +#define MAC_WUM_REG_OFFSET 0x002CU /*!< MAC wakeup management register offset */ +#define MAC_INTF_REG_OFFSET 0x0038U /*!< MAC interrupt flag register offset */ +#define MAC_INTMSK_REG_OFFSET 0x003CU /*!< MAC interrupt mask register offset */ + +#define MSC_RINTF_REG_OFFSET 0x0104U /*!< MSC receive interrupt flag register offset */ +#define MSC_TINTF_REG_OFFSET 0x0108U /*!< MSC transmit interrupt flag register offset */ +#define MSC_RINTMSK_REG_OFFSET 0x010CU /*!< MSC receive interrupt mask register offset */ +#define MSC_TINTMSK_REG_OFFSET 0x0110U /*!< MSC transmit interrupt mask register offset */ +#define MSC_SCCNT_REG_OFFSET 0x014CU /*!< MSC transmitted good frames after a single collision counter register offset */ +#define MSC_MSCCNT_REG_OFFSET 0x0150U /*!< MSC transmitted good frames after more than a single collision counter register offset */ +#define MSC_TGFCNT_REG_OFFSET 0x0168U /*!< MSC transmitted good frames counter register offset */ +#define MSC_RFCECNT_REG_OFFSET 0x0194U /*!< MSC received frames with CRC error counter register offset */ +#define MSC_RFAECNT_REG_OFFSET 0x0198U /*!< MSC received frames with alignment error counter register offset */ +#define MSC_RGUFCNT_REG_OFFSET 0x01C4U /*!< MSC received good unicast frames counter register offset */ + +#define DMA_STAT_REG_OFFSET 0x1014U /*!< DMA status register offset */ +#define DMA_INTEN_REG_OFFSET 0x101CU /*!< DMA interrupt enable register offset */ +#define DMA_TDTADDR_REG_OFFSET 0x1010U /*!< DMA transmit descriptor table address register offset */ +#define DMA_CTDADDR_REG_OFFSET 0x1048U /*!< DMA current transmit descriptor address register */ +#define DMA_CTBADDR_REG_OFFSET 0x1050U /*!< DMA current transmit buffer address register */ +#define DMA_RDTADDR_REG_OFFSET 0x100CU /*!< DMA receive descriptor table address register */ +#define DMA_CRDADDR_REG_OFFSET 0x104CU /*!< DMA current receive descriptor address register */ +#define DMA_CRBADDR_REG_OFFSET 0x1054U /*!< DMA current receive buffer address register */ + +/* ENET status flag get */ +typedef enum +{ + /* ENET_MAC_WUM register */ + ENET_MAC_FLAG_MPKR = ENET_REGIDX_BIT(MAC_WUM_REG_OFFSET, 5U), /*!< magic packet received flag */ + ENET_MAC_FLAG_WUFR = ENET_REGIDX_BIT(MAC_WUM_REG_OFFSET, 6U), /*!< wakeup frame received flag */ + /* ENET_MAC_FCTL register */ + ENET_MAC_FLAG_FLOWCONTROL = ENET_REGIDX_BIT(MAC_FCTL_REG_OFFSET, 0U), /*!< flow control status flag */ + /* ENET_MAC_INTF register */ + ENET_MAC_FLAG_WUM = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 3U), /*!< WUM status flag */ + ENET_MAC_FLAG_MSC = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 4U), /*!< MSC status flag */ + ENET_MAC_FLAG_MSCR = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 5U), /*!< MSC receive status flag */ + ENET_MAC_FLAG_MSCT = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 6U), /*!< MSC transmit status flag */ + ENET_MAC_FLAG_TMST = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 9U), /*!< timestamp trigger status flag */ + /* ENET_MSC_RINTF register */ + ENET_MSC_FLAG_RFCE = ENET_REGIDX_BIT(MSC_RINTF_REG_OFFSET, 5U), /*!< received frames CRC error flag */ + ENET_MSC_FLAG_RFAE = ENET_REGIDX_BIT(MSC_RINTF_REG_OFFSET, 6U), /*!< received frames alignment error flag */ + ENET_MSC_FLAG_RGUF = ENET_REGIDX_BIT(MSC_RINTF_REG_OFFSET, 17U), /*!< received good unicast frames flag */ + /* ENET_MSC_TINTF register */ + ENET_MSC_FLAG_TGFSC = ENET_REGIDX_BIT(MSC_TINTF_REG_OFFSET, 14U), /*!< transmitted good frames single collision flag */ + ENET_MSC_FLAG_TGFMSC = ENET_REGIDX_BIT(MSC_TINTF_REG_OFFSET, 15U), /*!< transmitted good frames more single collision flag */ + ENET_MSC_FLAG_TGF = ENET_REGIDX_BIT(MSC_TINTF_REG_OFFSET, 21U), /*!< transmitted good frames flag */ + /* ENET_DMA_STAT register */ + ENET_DMA_FLAG_TS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 0U), /*!< transmit status flag */ + ENET_DMA_FLAG_TPS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 1U), /*!< transmit process stopped status flag */ + ENET_DMA_FLAG_TBU = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 2U), /*!< transmit buffer unavailable status flag */ + ENET_DMA_FLAG_TJT = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 3U), /*!< transmit jabber timeout status flag */ + ENET_DMA_FLAG_RO = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 4U), /*!< receive overflow status flag */ + ENET_DMA_FLAG_TU = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 5U), /*!< transmit underflow status flag */ + ENET_DMA_FLAG_RS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 6U), /*!< receive status flag */ + ENET_DMA_FLAG_RBU = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 7U), /*!< receive buffer unavailable status flag */ + ENET_DMA_FLAG_RPS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 8U), /*!< receive process stopped status flag */ + ENET_DMA_FLAG_RWT = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 9U), /*!< receive watchdog timeout status flag */ + ENET_DMA_FLAG_ET = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 10U), /*!< early transmit status flag */ + ENET_DMA_FLAG_FBE = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 13U), /*!< fatal bus error status flag */ + ENET_DMA_FLAG_ER = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 14U), /*!< early receive status flag */ + ENET_DMA_FLAG_AI = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 15U), /*!< abnormal interrupt summary flag */ + ENET_DMA_FLAG_NI = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 16U), /*!< normal interrupt summary flag */ + ENET_DMA_FLAG_EB_DMA_ERROR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 23U), /*!< error during data transfer by RxDMA/TxDMA flag */ + ENET_DMA_FLAG_EB_TRANSFER_ERROR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 24U), /*!< error during write/read transfer flag */ + ENET_DMA_FLAG_EB_ACCESS_ERROR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 25U), /*!< error during data buffer/descriptor access flag */ + ENET_DMA_FLAG_MSC = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 27U), /*!< MSC status flag */ + ENET_DMA_FLAG_WUM = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 28U), /*!< WUM status flag */ + ENET_DMA_FLAG_TST = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 29U), /*!< timestamp trigger status flag */ +}enet_flag_enum; + +/* ENET stutus flag clear */ +typedef enum +{ + /* ENET_DMA_STAT register */ + ENET_DMA_FLAG_TS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 0U), /*!< transmit status flag */ + ENET_DMA_FLAG_TPS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 1U), /*!< transmit process stopped status flag */ + ENET_DMA_FLAG_TBU_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 2U), /*!< transmit buffer unavailable status flag */ + ENET_DMA_FLAG_TJT_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 3U), /*!< transmit jabber timeout status flag */ + ENET_DMA_FLAG_RO_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 4U), /*!< receive overflow status flag */ + ENET_DMA_FLAG_TU_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 5U), /*!< transmit underflow status flag */ + ENET_DMA_FLAG_RS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 6U), /*!< receive status flag */ + ENET_DMA_FLAG_RBU_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 7U), /*!< receive buffer unavailable status flag */ + ENET_DMA_FLAG_RPS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 8U), /*!< receive process stopped status flag */ + ENET_DMA_FLAG_RWT_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 9U), /*!< receive watchdog timeout status flag */ + ENET_DMA_FLAG_ET_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 10U), /*!< early transmit status flag */ + ENET_DMA_FLAG_FBE_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 13U), /*!< fatal bus error status flag */ + ENET_DMA_FLAG_ER_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 14U), /*!< early receive status flag */ + ENET_DMA_FLAG_AI_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 15U), /*!< abnormal interrupt summary flag */ + ENET_DMA_FLAG_NI_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 16U), /*!< normal interrupt summary flag */ +}enet_flag_clear_enum; + +/* ENET interrupt enable/disable */ +typedef enum +{ + /* ENET_MAC_INTMSK register */ + ENET_MAC_INT_WUMIM = ENET_REGIDX_BIT(MAC_INTMSK_REG_OFFSET, 3U), /*!< WUM interrupt mask */ + ENET_MAC_INT_TMSTIM = ENET_REGIDX_BIT(MAC_INTMSK_REG_OFFSET, 9U), /*!< timestamp trigger interrupt mask */ + /* ENET_MSC_RINTMSK register */ + ENET_MSC_INT_RFCEIM = ENET_REGIDX_BIT(MSC_RINTMSK_REG_OFFSET, 5U), /*!< received frame CRC error interrupt mask */ + ENET_MSC_INT_RFAEIM = ENET_REGIDX_BIT(MSC_RINTMSK_REG_OFFSET, 6U), /*!< received frames alignment error interrupt mask */ + ENET_MSC_INT_RGUFIM = ENET_REGIDX_BIT(MSC_RINTMSK_REG_OFFSET, 17U), /*!< received good unicast frames interrupt mask */ + /* ENET_MSC_TINTMSK register */ + ENET_MSC_INT_TGFSCIM = ENET_REGIDX_BIT(MSC_TINTMSK_REG_OFFSET, 14U), /*!< transmitted good frames single collision interrupt mask */ + ENET_MSC_INT_TGFMSCIM = ENET_REGIDX_BIT(MSC_TINTMSK_REG_OFFSET, 15U), /*!< transmitted good frames more single collision interrupt mask */ + ENET_MSC_INT_TGFIM = ENET_REGIDX_BIT(MSC_TINTMSK_REG_OFFSET, 21U), /*!< transmitted good frames interrupt mask */ + /* ENET_DMA_INTEN register */ + ENET_DMA_INT_TIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 0U), /*!< transmit interrupt enable */ + ENET_DMA_INT_TPSIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 1U), /*!< transmit process stopped interrupt enable */ + ENET_DMA_INT_TBUIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 2U), /*!< transmit buffer unavailable interrupt enable */ + ENET_DMA_INT_TJTIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 3U), /*!< transmit jabber timeout interrupt enable */ + ENET_DMA_INT_ROIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 4U), /*!< receive overflow interrupt enable */ + ENET_DMA_INT_TUIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 5U), /*!< transmit underflow interrupt enable */ + ENET_DMA_INT_RIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 6U), /*!< receive interrupt enable */ + ENET_DMA_INT_RBUIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 7U), /*!< receive buffer unavailable interrupt enable */ + ENET_DMA_INT_RPSIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 8U), /*!< receive process stopped interrupt enable */ + ENET_DMA_INT_RWTIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 9U), /*!< receive watchdog timeout interrupt enable */ + ENET_DMA_INT_ETIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 10U), /*!< early transmit interrupt enable */ + ENET_DMA_INT_FBEIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 13U), /*!< fatal bus error interrupt enable */ + ENET_DMA_INT_ERIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 14U), /*!< early receive interrupt enable */ + ENET_DMA_INT_AIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 15U), /*!< abnormal interrupt summary enable */ + ENET_DMA_INT_NIE = ENET_REGIDX_BIT(DMA_INTEN_REG_OFFSET, 16U), /*!< normal interrupt summary enable */ +}enet_int_enum; + +/* ENET interrupt flag get */ +typedef enum +{ + /* ENET_MAC_INTF register */ + ENET_MAC_INT_FLAG_WUM = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 3U), /*!< WUM status flag */ + ENET_MAC_INT_FLAG_MSC = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 4U), /*!< MSC status flag */ + ENET_MAC_INT_FLAG_MSCR = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 5U), /*!< MSC receive status flag */ + ENET_MAC_INT_FLAG_MSCT = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 6U), /*!< MSC transmit status flag */ + ENET_MAC_INT_FLAG_TMST = ENET_REGIDX_BIT(MAC_INTF_REG_OFFSET, 9U), /*!< timestamp trigger status flag */ + /* ENET_MSC_RINTF register */ + ENET_MSC_INT_FLAG_RFCE = ENET_REGIDX_BIT(MSC_RINTF_REG_OFFSET, 5U), /*!< received frames CRC error flag */ + ENET_MSC_INT_FLAG_RFAE = ENET_REGIDX_BIT(MSC_RINTF_REG_OFFSET, 6U), /*!< received frames alignment error flag */ + ENET_MSC_INT_FLAG_RGUF = ENET_REGIDX_BIT(MSC_RINTF_REG_OFFSET, 17U), /*!< received good unicast frames flag */ + /* ENET_MSC_TINTF register */ + ENET_MSC_INT_FLAG_TGFSC = ENET_REGIDX_BIT(MSC_TINTF_REG_OFFSET, 14U), /*!< transmitted good frames single collision flag */ + ENET_MSC_INT_FLAG_TGFMSC = ENET_REGIDX_BIT(MSC_TINTF_REG_OFFSET, 15U), /*!< transmitted good frames more single collision flag */ + ENET_MSC_INT_FLAG_TGF = ENET_REGIDX_BIT(MSC_TINTF_REG_OFFSET, 21U), /*!< transmitted good frames flag */ + /* ENET_DMA_STAT register */ + ENET_DMA_INT_FLAG_TS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 0U), /*!< transmit status flag */ + ENET_DMA_INT_FLAG_TPS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 1U), /*!< transmit process stopped status flag */ + ENET_DMA_INT_FLAG_TBU = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 2U), /*!< transmit buffer unavailable status flag */ + ENET_DMA_INT_FLAG_TJT = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 3U), /*!< transmit jabber timeout status flag */ + ENET_DMA_INT_FLAG_RO = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 4U), /*!< receive overflow status flag */ + ENET_DMA_INT_FLAG_TU = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 5U), /*!< transmit underflow status flag */ + ENET_DMA_INT_FLAG_RS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 6U), /*!< receive status flag */ + ENET_DMA_INT_FLAG_RBU = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 7U), /*!< receive buffer unavailable status flag */ + ENET_DMA_INT_FLAG_RPS = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 8U), /*!< receive process stopped status flag */ + ENET_DMA_INT_FLAG_RWT = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 9U), /*!< receive watchdog timeout status flag */ + ENET_DMA_INT_FLAG_ET = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 10U), /*!< early transmit status flag */ + ENET_DMA_INT_FLAG_FBE = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 13U), /*!< fatal bus error status flag */ + ENET_DMA_INT_FLAG_ER = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 14U), /*!< early receive status flag */ + ENET_DMA_INT_FLAG_AI = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 15U), /*!< abnormal interrupt summary flag */ + ENET_DMA_INT_FLAG_NI = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 16U), /*!< normal interrupt summary flag */ + ENET_DMA_INT_FLAG_MSC = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 27U), /*!< MSC status flag */ + ENET_DMA_INT_FLAG_WUM = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 28U), /*!< WUM status flag */ + ENET_DMA_INT_FLAG_TST = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 29U), /*!< timestamp trigger status flag */ +}enet_int_flag_enum; + +/* ENET interrupt flag clear */ +typedef enum +{ + /* ENET_DMA_STAT register */ + ENET_DMA_INT_FLAG_TS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 0U), /*!< transmit status flag */ + ENET_DMA_INT_FLAG_TPS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 1U), /*!< transmit process stopped status flag */ + ENET_DMA_INT_FLAG_TBU_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 2U), /*!< transmit buffer unavailable status flag */ + ENET_DMA_INT_FLAG_TJT_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 3U), /*!< transmit jabber timeout status flag */ + ENET_DMA_INT_FLAG_RO_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 4U), /*!< receive overflow status flag */ + ENET_DMA_INT_FLAG_TU_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 5U), /*!< transmit underflow status flag */ + ENET_DMA_INT_FLAG_RS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 6U), /*!< receive status flag */ + ENET_DMA_INT_FLAG_RBU_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 7U), /*!< receive buffer unavailable status flag */ + ENET_DMA_INT_FLAG_RPS_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 8U), /*!< receive process stopped status flag */ + ENET_DMA_INT_FLAG_RWT_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 9U), /*!< receive watchdog timeout status flag */ + ENET_DMA_INT_FLAG_ET_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 10U), /*!< early transmit status flag */ + ENET_DMA_INT_FLAG_FBE_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 13U), /*!< fatal bus error status flag */ + ENET_DMA_INT_FLAG_ER_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 14U), /*!< early receive status flag */ + ENET_DMA_INT_FLAG_AI_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 15U), /*!< abnormal interrupt summary flag */ + ENET_DMA_INT_FLAG_NI_CLR = ENET_REGIDX_BIT(DMA_STAT_REG_OFFSET, 16U), /*!< normal interrupt summary flag */ +}enet_int_flag_clear_enum; + +/* current RX/TX descriptor/buffer/descriptor table address get */ +typedef enum +{ + ENET_RX_DESC_TABLE = DMA_RDTADDR_REG_OFFSET, /*!< RX descriptor table */ + ENET_RX_CURRENT_DESC = DMA_CRDADDR_REG_OFFSET, /*!< current RX descriptor */ + ENET_RX_CURRENT_BUFFER = DMA_CRBADDR_REG_OFFSET, /*!< current RX buffer */ + ENET_TX_DESC_TABLE = DMA_TDTADDR_REG_OFFSET, /*!< TX descriptor table */ + ENET_TX_CURRENT_DESC = DMA_CTDADDR_REG_OFFSET, /*!< current TX descriptor */ + ENET_TX_CURRENT_BUFFER = DMA_CTBADDR_REG_OFFSET /*!< current TX buffer */ +}enet_desc_reg_enum; + +/* MAC statistics counter get */ +typedef enum +{ + ENET_MSC_TX_SCCNT = MSC_SCCNT_REG_OFFSET, /*!< MSC transmitted good frames after a single collision counter */ + ENET_MSC_TX_MSCCNT = MSC_MSCCNT_REG_OFFSET, /*!< MSC transmitted good frames after more than a single collision counter */ + ENET_MSC_TX_TGFCNT = MSC_TGFCNT_REG_OFFSET, /*!< MSC transmitted good frames counter */ + ENET_MSC_RX_RFCECNT = MSC_RFCECNT_REG_OFFSET, /*!< MSC received frames with CRC error counter */ + ENET_MSC_RX_RFAECNT = MSC_RFAECNT_REG_OFFSET, /*!< MSC received frames with alignment error counter */ + ENET_MSC_RX_RGUFCNT = MSC_RGUFCNT_REG_OFFSET /*!< MSC received good unicast frames counter */ +}enet_msc_counter_enum; + +/* function option, used for ENET initialization */ +typedef enum +{ + FORWARD_OPTION = BIT(0), /*!< configure the frame forward related parameters */ + DMABUS_OPTION = BIT(1), /*!< configure the DMA bus mode related parameters */ + DMA_MAXBURST_OPTION = BIT(2), /*!< configure the DMA max burst related parameters */ + DMA_ARBITRATION_OPTION = BIT(3), /*!< configure the DMA arbitration related parameters */ + STORE_OPTION = BIT(4), /*!< configure the store forward mode related parameters */ + DMA_OPTION = BIT(5), /*!< configure the DMA control related parameters */ + VLAN_OPTION = BIT(6), /*!< configure the VLAN tag related parameters */ + FLOWCTL_OPTION = BIT(7), /*!< configure the flow control related parameters */ + HASHH_OPTION = BIT(8), /*!< configure the hash list high 32-bit related parameters */ + HASHL_OPTION = BIT(9), /*!< configure the hash list low 32-bit related parameters */ + FILTER_OPTION = BIT(10), /*!< configure the frame filter control related parameters */ + HALFDUPLEX_OPTION = BIT(11), /*!< configure the halfduplex related parameters */ + TIMER_OPTION = BIT(12), /*!< configure the frame timer related parameters */ + INTERFRAMEGAP_OPTION = BIT(13), /*!< configure the inter frame gap related parameters */ +}enet_option_enum; + +/* phy mode and mac loopback configurations */ +typedef enum +{ + ENET_AUTO_NEGOTIATION = 0x01u, /*!< PHY auto negotiation */ + ENET_100M_FULLDUPLEX = (ENET_MAC_CFG_SPD | ENET_MAC_CFG_DPM), /*!< 100Mbit/s, full-duplex */ + ENET_100M_HALFDUPLEX = ENET_MAC_CFG_SPD , /*!< 100Mbit/s, half-duplex */ + ENET_10M_FULLDUPLEX = ENET_MAC_CFG_DPM, /*!< 10Mbit/s, full-duplex */ + ENET_10M_HALFDUPLEX = (uint32_t)0x00000000U, /*!< 10Mbit/s, half-duplex */ + ENET_LOOPBACKMODE = (ENET_MAC_CFG_LBM | ENET_MAC_CFG_DPM) /*!< MAC in loopback mode at the MII */ +}enet_mediamode_enum; + +/* IP frame checksum function */ +typedef enum +{ + ENET_NO_AUTOCHECKSUM = (uint32_t)0x00000000U, /*!< disable IP frame checksum function */ + ENET_AUTOCHECKSUM_DROP_FAILFRAMES = ENET_MAC_CFG_IPFCO, /*!< enable IP frame checksum function */ + ENET_AUTOCHECKSUM_ACCEPT_FAILFRAMES = (ENET_MAC_CFG_IPFCO|ENET_DMA_CTL_DTCERFD) /*!< enable IP frame checksum function, and the received frame + with only payload error but no other errors will not be dropped */ +}enet_chksumconf_enum; + +/* received frame filter function */ +typedef enum +{ + ENET_PROMISCUOUS_MODE = ENET_MAC_FRMF_PM, /*!< promiscuous mode enabled */ + ENET_RECEIVEALL = (int32_t)ENET_MAC_FRMF_FAR, /*!< all received frame are forwarded to application */ + ENET_BROADCAST_FRAMES_PASS = (uint32_t)0x00000000U, /*!< the address filters pass all received broadcast frames */ + ENET_BROADCAST_FRAMES_DROP = ENET_MAC_FRMF_BFRMD /*!< the address filters filter all incoming broadcast frames */ +}enet_frmrecept_enum; + +/* register group value get */ +typedef enum +{ + ALL_MAC_REG = 0, /*!< MAC register group */ + ALL_MSC_REG = 22, /*!< MSC register group */ + ALL_PTP_REG = 33, /*!< PTP register group */ + ALL_DMA_REG = 44, /*!< DMA register group */ +}enet_registers_type_enum; + +/* dma direction select */ +typedef enum +{ + ENET_DMA_TX = ENET_DMA_STAT_TP, /*!< DMA transmit direction */ + ENET_DMA_RX = ENET_DMA_STAT_RP /*!< DMA receive direction */ +}enet_dmadirection_enum; + +/* PHY operation direction select */ +typedef enum +{ + ENET_PHY_READ = (uint32_t)0x00000000, /*!< read PHY */ + ENET_PHY_WRITE = ENET_MAC_PHY_CTL_PW /*!< write PHY */ +}enet_phydirection_enum; + +/* register operation direction select */ +typedef enum +{ + ENET_REG_READ, /*!< read register */ + ENET_REG_WRITE /*!< write register */ +}enet_regdirection_enum; + +/* ENET MAC addresses */ +typedef enum +{ + ENET_MAC_ADDRESS0 = ((uint32_t)0x00000000), /*!< MAC address0 */ + ENET_MAC_ADDRESS1 = ((uint32_t)0x00000008), /*!< MAC address1 */ + ENET_MAC_ADDRESS2 = ((uint32_t)0x00000010), /*!< MAC address2 */ + ENET_MAC_ADDRESS3 = ((uint32_t)0x00000018) /*!< MAC address3 */ +}enet_macaddress_enum; + +/* descriptor information */ +typedef enum +{ + TXDESC_COLLISION_COUNT, /*!< the number of collisions occurred before the frame was transmitted */ + TXDESC_BUFFER_1_ADDR, /*!< transmit frame buffer 1 address */ + RXDESC_FRAME_LENGTH, /*!< the byte length of the received frame that was transferred to the buffer */ + RXDESC_BUFFER_1_SIZE, /*!< receive buffer 1 size */ + RXDESC_BUFFER_2_SIZE, /*!< receive buffer 2 size */ + RXDESC_BUFFER_1_ADDR /*!< receive frame buffer 1 address */ +}enet_descstate_enum; + +/* structure for initialization of the ENET */ +typedef struct +{ + uint32_t option_enable; /*!< select which function to configure */ + uint32_t forward_frame; /*!< frame forward related parameters */ + uint32_t dmabus_mode; /*!< DMA bus mode related parameters */ + uint32_t dma_maxburst; /*!< DMA max burst related parameters */ + uint32_t dma_arbitration; /*!< DMA Tx and Rx arbitration related parameters */ + uint32_t store_forward_mode; /*!< store forward mode related parameters */ + uint32_t dma_function; /*!< DMA control related parameters */ + uint32_t vlan_config; /*!< VLAN tag related parameters */ + uint32_t flow_control; /*!< flow control related parameters */ + uint32_t hashtable_high; /*!< hash list high 32-bit related parameters */ + uint32_t hashtable_low; /*!< hash list low 32-bit related parameters */ + uint32_t framesfilter_mode; /*!< frame filter control related parameters */ + uint32_t halfduplex_param; /*!< halfduplex related parameters */ + uint32_t timer_config; /*!< frame timer related parameters */ + uint32_t interframegap; /*!< inter frame gap related parameters */ +}enet_initpara_struct; + +/* structure for ENET DMA desciptors */ +typedef struct +{ + uint32_t status; /*!< status */ + uint32_t control_buffer_size; /*!< control and buffer1, buffer2 lengths */ + uint32_t buffer1_addr; /*!< buffer1 address pointer/timestamp low */ + uint32_t buffer2_next_desc_addr; /*!< buffer2 or next descriptor address pointer/timestamp high */ +} enet_descriptors_struct; + +/* structure of PTP system time */ +typedef struct +{ + uint32_t second; /*!< second of system time */ + uint32_t nanosecond; /*!< nanosecond of system time */ + uint32_t sign; /*!< sign of system time */ +}enet_ptp_systime_struct; + +/* mac_cfg register value */ +#define MAC_CFG_BOL(regval) (BITS(5,6) & ((uint32_t)(regval) << 5)) /*!< write value to ENET_MAC_CFG_BOL bit field */ +#define ENET_BACKOFFLIMIT_10 MAC_CFG_BOL(0) /*!< min (n, 10) */ +#define ENET_BACKOFFLIMIT_8 MAC_CFG_BOL(1) /*!< min (n, 8) */ +#define ENET_BACKOFFLIMIT_4 MAC_CFG_BOL(2) /*!< min (n, 4) */ +#define ENET_BACKOFFLIMIT_1 MAC_CFG_BOL(3) /*!< min (n, 1) */ + +#define MAC_CFG_IGBS(regval) (BITS(17,19) & ((uint32_t)(regval) << 17)) /*!< write value to ENET_MAC_CFG_IGBS bit field */ +#define ENET_INTERFRAMEGAP_96BIT MAC_CFG_IGBS(0) /*!< minimum 96 bit times */ +#define ENET_INTERFRAMEGAP_88BIT MAC_CFG_IGBS(1) /*!< minimum 88 bit times */ +#define ENET_INTERFRAMEGAP_80BIT MAC_CFG_IGBS(2) /*!< minimum 80 bit times */ +#define ENET_INTERFRAMEGAP_72BIT MAC_CFG_IGBS(3) /*!< minimum 72 bit times */ +#define ENET_INTERFRAMEGAP_64BIT MAC_CFG_IGBS(4) /*!< minimum 64 bit times */ +#define ENET_INTERFRAMEGAP_56BIT MAC_CFG_IGBS(5) /*!< minimum 56 bit times */ +#define ENET_INTERFRAMEGAP_48BIT MAC_CFG_IGBS(6) /*!< minimum 48 bit times */ +#define ENET_INTERFRAMEGAP_40BIT MAC_CFG_IGBS(7) /*!< minimum 40 bit times */ + +#define ENET_WATCHDOG_ENABLE ((uint32_t)0x00000000U) /*!< the MAC allows no more than 2048 bytes of the frame being received */ +#define ENET_WATCHDOG_DISABLE ENET_MAC_CFG_WDD /*!< the MAC disables the watchdog timer on the receiver, and can receive frames of up to 16384 bytes */ + +#define ENET_JABBER_ENABLE ((uint32_t)0x00000000U) /*!< the maximum transmission byte is 2048 */ +#define ENET_JABBER_DISABLE ENET_MAC_CFG_JBD /*!< the maximum transmission byte can be 16384 */ + +#define ENET_CARRIERSENSE_ENABLE ((uint32_t)0x00000000U) /*!< the MAC transmitter generates carrier sense error and aborts the transmission */ +#define ENET_CARRIERSENSE_DISABLE ENET_MAC_CFG_CSD /*!< the MAC transmitter ignores the MII CRS signal during frame transmission in half-duplex mode */ + +#define ENET_SPEEDMODE_10M ((uint32_t)0x00000000U) /*!< 10 Mbit/s */ +#define ENET_SPEEDMODE_100M ENET_MAC_CFG_SPD /*!< 100 Mbit/s */ + +#define ENET_RECEIVEOWN_ENABLE ((uint32_t)0x00000000U) /*!< the MAC receives all packets that are given by the PHY while transmitting */ +#define ENET_RECEIVEOWN_DISABLE ENET_MAC_CFG_ROD /*!< the MAC disables the reception of frames in half-duplex mode */ + +#define ENET_LOOPBACKMODE_ENABLE ENET_MAC_CFG_LBM /*!< the MAC operates in loopback mode at the MII */ +#define ENET_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000U) /*!< the MAC operates in normal mode */ + +#define ENET_MODE_FULLDUPLEX ENET_MAC_CFG_DPM /*!< full-duplex mode enable */ +#define ENET_MODE_HALFDUPLEX ((uint32_t)0x00000000U) /*!< half-duplex mode enable */ + +#define ENET_CHECKSUMOFFLOAD_ENABLE ENET_MAC_CFG_IPFCO /*!< IP frame checksum offload function enabled for received IP frame */ +#define ENET_CHECKSUMOFFLOAD_DISABLE ((uint32_t)0x00000000U) /*!< the checksum offload function in the receiver is disabled */ + +#define ENET_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000U) /*!< the MAC attempts retries up to 16 times based on the settings of BOL*/ +#define ENET_RETRYTRANSMISSION_DISABLE ENET_MAC_CFG_RTD /*!< the MAC attempts only 1 transmission */ + +#define ENET_AUTO_PADCRC_DROP_ENABLE ENET_MAC_CFG_APCD /*!< the MAC strips the Pad/FCS field on received frames */ +#define ENET_AUTO_PADCRC_DROP_DISABLE ((uint32_t)0x00000000U) /*!< the MAC forwards all received frames without modify it */ +#define ENET_AUTO_PADCRC_DROP ENET_MAC_CFG_APCD /*!< the function of the MAC strips the Pad/FCS field on received frames */ + +#define ENET_DEFERRALCHECK_ENABLE ENET_MAC_CFG_DFC /*!< the deferral check function is enabled in the MAC */ +#define ENET_DEFERRALCHECK_DISABLE ((uint32_t)0x00000000U) /*!< the deferral check function is disabled */ + +/* mac_frmf register value */ +#define MAC_FRMF_PCFRM(regval) (BITS(6,7) & ((uint32_t)(regval) << 6)) /*!< write value to ENET_MAC_FRMF_PCFRM bit field */ +#define ENET_PCFRM_PREVENT_ALL MAC_FRMF_PCFRM(0) /*!< MAC prevents all control frames from reaching the application */ +#define ENET_PCFRM_PREVENT_PAUSEFRAME MAC_FRMF_PCFRM(1) /*!< MAC only forwards all other control frames except pause control frame */ +#define ENET_PCFRM_FORWARD_ALL MAC_FRMF_PCFRM(2) /*!< MAC forwards all control frames to application even if they fail the address filter */ +#define ENET_PCFRM_FORWARD_FILTERED MAC_FRMF_PCFRM(3) /*!< MAC forwards control frames that only pass the address filter */ + +#define ENET_RX_FILTER_DISABLE ENET_MAC_FRMF_FAR /*!< all received frame are forwarded to application */ +#define ENET_RX_FILTER_ENABLE ((uint32_t)0x00000000U) /*!< only the frame passed the filter can be forwarded to application */ + +#define ENET_SRC_FILTER_NORMAL_ENABLE ENET_MAC_FRMF_SAFLT /*!< filter source address */ +#define ENET_SRC_FILTER_INVERSE_ENABLE (ENET_MAC_FRMF_SAFLT | ENET_MAC_FRMF_SAIFLT) /*!< inverse source address filtering result */ +#define ENET_SRC_FILTER_DISABLE ((uint32_t)0x00000000U) /*!< source address function in filter disable */ +#define ENET_SRC_FILTER ENET_MAC_FRMF_SAFLT /*!< filter source address function */ +#define ENET_SRC_FILTER_INVERSE ENET_MAC_FRMF_SAIFLT /*!< inverse source address filtering result function */ + +#define ENET_BROADCASTFRAMES_ENABLE ((uint32_t)0x00000000U) /*!< the address filters pass all received broadcast frames */ +#define ENET_BROADCASTFRAMES_DISABLE ENET_MAC_FRMF_BFRMD /*!< the address filters filter all incoming broadcast frames */ + +#define ENET_DEST_FILTER_INVERSE_ENABLE ENET_MAC_FRMF_DAIFLT /*!< inverse DA filtering result */ +#define ENET_DEST_FILTER_INVERSE_DISABLE ((uint32_t)0x00000000U) /*!< not inverse DA filtering result */ +#define ENET_DEST_FILTER_INVERSE ENET_MAC_FRMF_DAIFLT /*!< inverse DA filtering result function */ + +#define ENET_PROMISCUOUS_ENABLE ENET_MAC_FRMF_PM /*!< promiscuous mode enabled */ +#define ENET_PROMISCUOUS_DISABLE ((uint32_t)0x00000000U) /*!< promiscuous mode disabled */ + +#define ENET_MULTICAST_FILTER_HASH_OR_PERFECT (ENET_MAC_FRMF_HMF | ENET_MAC_FRMF_HPFLT) /*!< pass multicast frames that match either the perfect or the hash filtering */ +#define ENET_MULTICAST_FILTER_HASH ENET_MAC_FRMF_HMF /*!< pass multicast frames that match the hash filtering */ +#define ENET_MULTICAST_FILTER_PERFECT ((uint32_t)0x00000000U) /*!< pass multicast frames that match the perfect filtering */ +#define ENET_MULTICAST_FILTER_NONE ENET_MAC_FRMF_MFD /*!< all multicast frames are passed */ +#define ENET_MULTICAST_FILTER_PASS ENET_MAC_FRMF_MFD /*!< pass all multicast frames function */ +#define ENET_MULTICAST_FILTER_HASH_MODE ENET_MAC_FRMF_HMF /*!< HASH multicast filter function */ +#define ENET_FILTER_MODE_EITHER ENET_MAC_FRMF_HPFLT /*!< HASH or perfect filter function */ + +#define ENET_UNICAST_FILTER_EITHER (ENET_MAC_FRMF_HUF | ENET_MAC_FRMF_HPFLT) /*!< pass unicast frames that match either the perfect or the hash filtering */ +#define ENET_UNICAST_FILTER_HASH ENET_MAC_FRMF_HUF /*!< pass unicast frames that match the hash filtering */ +#define ENET_UNICAST_FILTER_PERFECT ((uint32_t)0x00000000U) /*!< pass unicast frames that match the perfect filtering */ +#define ENET_UNICAST_FILTER_HASH_MODE ENET_MAC_FRMF_HUF /*!< HASH unicast filter function */ + +/* mac_phy_ctl register value */ +#define MAC_PHY_CTL_CLR(regval) (BITS(2,4) & ((uint32_t)(regval) << 2)) /*!< write value to ENET_MAC_PHY_CTL_CLR bit field */ +#define ENET_MDC_HCLK_DIV42 MAC_PHY_CTL_CLR(0) /*!< HCLK:60-100 MHz; MDC clock= HCLK/42 */ +#define ENET_MDC_HCLK_DIV62 MAC_PHY_CTL_CLR(1) /*!< HCLK:100-120 MHz; MDC clock= HCLK/62 */ +#define ENET_MDC_HCLK_DIV16 MAC_PHY_CTL_CLR(2) /*!< HCLK:20-35 MHz; MDC clock= HCLK/16 */ +#define ENET_MDC_HCLK_DIV26 MAC_PHY_CTL_CLR(3) /*!< HCLK:35-60 MHz; MDC clock= HCLK/26 */ + +#define MAC_PHY_CTL_PR(regval) (BITS(6,10) & ((uint32_t)(regval) << 6)) /*!< write value to ENET_MAC_PHY_CTL_PR bit field */ + +#define MAC_PHY_CTL_PA(regval) (BITS(11,15) & ((uint32_t)(regval) << 11)) /*!< write value to ENET_MAC_PHY_CTL_PA bit field */ + +/* mac_phy_data register value */ +#define MAC_PHY_DATA_PD(regval) (BITS(0,15) & ((uint32_t)(regval) << 0)) /*!< write value to ENET_MAC_PHY_DATA_PD bit field */ + +/* mac_fctl register value */ +#define MAC_FCTL_PLTS(regval) (BITS(4,5) & ((uint32_t)(regval) << 4)) /*!< write value to ENET_MAC_FCTL_PLTS bit field */ +#define ENET_PAUSETIME_MINUS4 MAC_FCTL_PLTS(0) /*!< pause time minus 4 slot times */ +#define ENET_PAUSETIME_MINUS28 MAC_FCTL_PLTS(1) /*!< pause time minus 28 slot times */ +#define ENET_PAUSETIME_MINUS144 MAC_FCTL_PLTS(2) /*!< pause time minus 144 slot times */ +#define ENET_PAUSETIME_MINUS256 MAC_FCTL_PLTS(3) /*!< pause time minus 256 slot times */ + +#define ENET_ZERO_QUANTA_PAUSE_ENABLE ((uint32_t)0x00000000U) /*!< enable the automatic zero-quanta generation function */ +#define ENET_ZERO_QUANTA_PAUSE_DISABLE ENET_MAC_FCTL_DZQP /*!< disable the automatic zero-quanta generation function */ +#define ENET_ZERO_QUANTA_PAUSE ENET_MAC_FCTL_DZQP /*!< the automatic zero-quanta generation function */ + +#define ENET_MAC0_AND_UNIQUE_ADDRESS_PAUSEDETECT ENET_MAC_FCTL_UPFDT /*!< besides the unique multicast address, MAC also use the MAC0 address to detect pause frame */ +#define ENET_UNIQUE_PAUSEDETECT ((uint32_t)0x00000000U) /*!< only the unique multicast address for pause frame which is specified in IEEE802.3 can be detected */ + +#define ENET_RX_FLOWCONTROL_ENABLE ENET_MAC_FCTL_RFCEN /*!< enable decoding function for the received pause frame and process it */ +#define ENET_RX_FLOWCONTROL_DISABLE ((uint32_t)0x00000000U) /*!< decode function for pause frame is disabled */ +#define ENET_RX_FLOWCONTROL ENET_MAC_FCTL_RFCEN /*!< decoding function for the received pause frame and process it */ + +#define ENET_TX_FLOWCONTROL_ENABLE ENET_MAC_FCTL_TFCEN /*!< enable the flow control operation in the MAC */ +#define ENET_TX_FLOWCONTROL_DISABLE ((uint32_t)0x00000000U) /*!< disable the flow control operation in the MAC */ +#define ENET_TX_FLOWCONTROL ENET_MAC_FCTL_TFCEN /*!< the flow control operation in the MAC */ + +#define ENET_BACK_PRESSURE_ENABLE ENET_MAC_FCTL_FLCBBKPA /*!< enable the back pressure operation in the MAC */ +#define ENET_BACK_PRESSURE_DISABLE ((uint32_t)0x00000000U) /*!< disable the back pressure operation in the MAC */ +#define ENET_BACK_PRESSURE ENET_MAC_FCTL_FLCBBKPA /*!< the back pressure operation in the MAC */ + +#define MAC_FCTL_PTM(regval) (BITS(16,31) & ((uint32_t)(regval) << 16)) /*!< write value to ENET_MAC_FCTL_PTM bit field */ +/* mac_vlt register value */ +#define MAC_VLT_VLTI(regval) (BITS(0,15) & ((uint32_t)(regval) << 0)) /*!< write value to ENET_MAC_VLT_VLTI bit field */ + +#define ENET_VLANTAGCOMPARISON_12BIT ENET_MAC_VLT_VLTC /*!< only low 12 bits of the VLAN tag are used for comparison */ +#define ENET_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000U) /*!< all 16 bits of the VLAN tag are used for comparison */ + +/* mac_wum register value */ +#define ENET_WUM_FLAG_WUFFRPR ENET_MAC_WUM_WUFFRPR /*!< wakeup frame filter register poniter reset */ +#define ENET_WUM_FLAG_WUFR ENET_MAC_WUM_WUFR /*!< wakeup frame received */ +#define ENET_WUM_FLAG_MPKR ENET_MAC_WUM_MPKR /*!< magic packet received */ +#define ENET_WUM_POWER_DOWN ENET_MAC_WUM_PWD /*!< power down mode */ +#define ENET_WUM_MAGIC_PACKET_FRAME ENET_MAC_WUM_MPEN /*!< enable a wakeup event due to magic packet reception */ +#define ENET_WUM_WAKE_UP_FRAME ENET_MAC_WUM_WFEN /*!< enable a wakeup event due to wakeup frame reception */ +#define ENET_WUM_GLOBAL_UNICAST ENET_MAC_WUM_GU /*!< any received unicast frame passed filter is considered to be a wakeup frame */ + +/* mac_addr0h register value */ +#define MAC_ADDR0H_ADDR0H(regval) (BITS(0,15) & ((uint32_t)(regval) << 0)) /*!< write value to ENET_MAC_ADDR0H_ADDR0H bit field */ + +/* mac_addrxh register value, x = 1,2,3 */ +#define MAC_ADDR123H_ADDR123H(regval) (BITS(0,15) & ((uint32_t)(regval) << 0)) /*!< write value to ENET_MAC_ADDRxH_ADDRxH(x=1,2,3) bit field */ + +#define ENET_ADDRESS_MASK_BYTE0 BIT(24) /*!< low register bits [7:0] */ +#define ENET_ADDRESS_MASK_BYTE1 BIT(25) /*!< low register bits [15:8] */ +#define ENET_ADDRESS_MASK_BYTE2 BIT(26) /*!< low register bits [23:16] */ +#define ENET_ADDRESS_MASK_BYTE3 BIT(27) /*!< low register bits [31:24] */ +#define ENET_ADDRESS_MASK_BYTE4 BIT(28) /*!< high register bits [7:0] */ +#define ENET_ADDRESS_MASK_BYTE5 BIT(29) /*!< high register bits [15:8] */ + +#define ENET_ADDRESS_FILTER_SA BIT(30) /*!< use MAC address[47:0] is to compare with the SA fields of the received frame */ +#define ENET_ADDRESS_FILTER_DA ((uint32_t)0x00000000) /*!< use MAC address[47:0] is to compare with the DA fields of the received frame */ + +/* mac_fcth register value */ +#define MAC_FCTH_RFA(regval) ((BITS(0,2) & ((uint32_t)(regval) << 0))<<8) /*!< write value to ENET_MAC_FCTH_RFA bit field */ +#define ENET_ACTIVE_THRESHOLD_256BYTES MAC_FCTH_RFA(0) /*!< threshold level is 256 bytes */ +#define ENET_ACTIVE_THRESHOLD_512BYTES MAC_FCTH_RFA(1) /*!< threshold level is 512 bytes */ +#define ENET_ACTIVE_THRESHOLD_768BYTES MAC_FCTH_RFA(2) /*!< threshold level is 768 bytes */ +#define ENET_ACTIVE_THRESHOLD_1024BYTES MAC_FCTH_RFA(3) /*!< threshold level is 1024 bytes */ +#define ENET_ACTIVE_THRESHOLD_1280BYTES MAC_FCTH_RFA(4) /*!< threshold level is 1280 bytes */ +#define ENET_ACTIVE_THRESHOLD_1536BYTES MAC_FCTH_RFA(5) /*!< threshold level is 1536 bytes */ +#define ENET_ACTIVE_THRESHOLD_1792BYTES MAC_FCTH_RFA(6) /*!< threshold level is 1792 bytes */ + +#define MAC_FCTH_RFD(regval) ((BITS(4,6) & ((uint32_t)(regval) << 4))<<8) /*!< write value to ENET_MAC_FCTH_RFD bit field */ +#define ENET_DEACTIVE_THRESHOLD_256BYTES MAC_FCTH_RFD(0) /*!< threshold level is 256 bytes */ +#define ENET_DEACTIVE_THRESHOLD_512BYTES MAC_FCTH_RFD(1) /*!< threshold level is 512 bytes */ +#define ENET_DEACTIVE_THRESHOLD_768BYTES MAC_FCTH_RFD(2) /*!< threshold level is 768 bytes */ +#define ENET_DEACTIVE_THRESHOLD_1024BYTES MAC_FCTH_RFD(3) /*!< threshold level is 1024 bytes */ +#define ENET_DEACTIVE_THRESHOLD_1280BYTES MAC_FCTH_RFD(4) /*!< threshold level is 1280 bytes */ +#define ENET_DEACTIVE_THRESHOLD_1536BYTES MAC_FCTH_RFD(5) /*!< threshold level is 1536 bytes */ +#define ENET_DEACTIVE_THRESHOLD_1792BYTES MAC_FCTH_RFD(6) /*!< threshold level is 1792 bytes */ + +/* msc_ctl register value */ +#define ENET_MSC_COUNTER_STOP_ROLLOVER ENET_MSC_CTL_CTSR /*!< counter stop rollover */ +#define ENET_MSC_RESET_ON_READ ENET_MSC_CTL_RTOR /*!< reset on read */ +#define ENET_MSC_COUNTERS_FREEZE ENET_MSC_CTL_MCFZ /*!< MSC counter freeze */ + +/* ptp_tsctl register value */ +#define ENET_RXTX_TIMESTAMP ENET_PTP_TSCTL_TMSEN /*!< enable timestamp function for transmit and receive frames */ +#define ENET_PTP_TIMESTAMP_INT ENET_PTP_TSCTL_TMSITEN /*!< timestamp interrupt trigger enable */ + +/* ptp_ssinc register value */ +#define PTP_SSINC_STMSSI(regval) (BITS(0,7) & ((uint32_t)(regval) << 0)) /*!< write value to ENET_PTP_SSINC_STMSSI bit field */ + +/* ptp_tsl register value */ +#define GET_PTP_TSL_STMSS(regval) GET_BITS((uint32_t)(regval),0,30) /*!< get value of ENET_PTP_TSL_STMSS bit field */ + +#define ENET_PTP_TIME_POSITIVE ((uint32_t)0x00000000) /*!< time value is positive */ +#define ENET_PTP_TIME_NEGATIVE ENET_PTP_TSL_STS /*!< time value is negative */ + +#define GET_PTP_TSL_STS(regval) (((regval) & BIT(31)) >> (31U)) /*!< get value of ENET_PTP_TSL_STS bit field */ + +/* ptp_tsul register value */ +#define PTP_TSUL_TMSUSS(regval) (BITS(0,30) & ((uint32_t)(regval) << 0)) /*!< write value to ENET_PTP_TSUL_TMSUSS bit field */ + +#define ENET_PTP_ADD_TO_TIME ((uint32_t)0x00000000) /*!< timestamp update value is added to system time */ +#define ENET_PTP_SUBSTRACT_FROM_TIME ENET_PTP_TSUL_TMSUPNS /*!< timestamp update value is subtracted from system time */ + +/* dma_bctl register value */ +#define DMA_BCTL_DPSL(regval) (BITS(2,6) & ((uint32_t)(regval) << 2)) /*!< write value to ENET_DMA_BCTL_DPSL bit field */ +#define GET_DMA_BCTL_DPSL(regval) GET_BITS((regval),2,6) /*!< get value of ENET_DMA_BCTL_DPSL bit field */ + +#define DMA_BCTL_PGBL(regval) (BITS(8,13) & ((uint32_t)(regval) << 8)) /*!< write value to ENET_DMA_BCTL_PGBL bit field */ +#define ENET_PGBL_1BEAT DMA_BCTL_PGBL(1) /*!< maximum number of beats is 1 */ +#define ENET_PGBL_2BEAT DMA_BCTL_PGBL(2) /*!< maximum number of beats is 2 */ +#define ENET_PGBL_4BEAT DMA_BCTL_PGBL(4) /*!< maximum number of beats is 4 */ +#define ENET_PGBL_8BEAT DMA_BCTL_PGBL(8) /*!< maximum number of beats is 8 */ +#define ENET_PGBL_16BEAT DMA_BCTL_PGBL(16) /*!< maximum number of beats is 16 */ +#define ENET_PGBL_32BEAT DMA_BCTL_PGBL(32) /*!< maximum number of beats is 32 */ +#define ENET_PGBL_4xPGBL_4BEAT (DMA_BCTL_PGBL(1)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats is 4 */ +#define ENET_PGBL_4xPGBL_8BEAT (DMA_BCTL_PGBL(2)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats is 8 */ +#define ENET_PGBL_4xPGBL_16BEAT (DMA_BCTL_PGBL(4)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats is 16 */ +#define ENET_PGBL_4xPGBL_32BEAT (DMA_BCTL_PGBL(8)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats is 32 */ +#define ENET_PGBL_4xPGBL_64BEAT (DMA_BCTL_PGBL(16)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats is 64 */ +#define ENET_PGBL_4xPGBL_128BEAT (DMA_BCTL_PGBL(32)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats is 128 */ + +#define DMA_BCTL_RTPR(regval) (BITS(14,15) & ((uint32_t)(regval) << 14)) /*!< write value to ENET_DMA_BCTL_RTPR bit field */ +#define ENET_ARBITRATION_RXTX_1_1 DMA_BCTL_RTPR(0) /*!< receive and transmit priority ratio is 1:1*/ +#define ENET_ARBITRATION_RXTX_2_1 DMA_BCTL_RTPR(1) /*!< receive and transmit priority ratio is 2:1*/ +#define ENET_ARBITRATION_RXTX_3_1 DMA_BCTL_RTPR(2) /*!< receive and transmit priority ratio is 3:1 */ +#define ENET_ARBITRATION_RXTX_4_1 DMA_BCTL_RTPR(3) /*!< receive and transmit priority ratio is 4:1 */ +#define ENET_ARBITRATION_RXPRIORTX ENET_DMA_BCTL_DAB /*!< RxDMA has higher priority than TxDMA */ + +#define ENET_FIXED_BURST_ENABLE ENET_DMA_BCTL_FB /*!< AHB can only use SINGLE/INCR4/INCR8/INCR16 during start of normal burst transfers */ +#define ENET_FIXED_BURST_DISABLE ((uint32_t)0x00000000) /*!< AHB can use SINGLE/INCR burst transfer operations */ + +#define DMA_BCTL_RXDP(regval) (BITS(17,22) & ((uint32_t)(regval) << 17)) /*!< write value to ENET_DMA_BCTL_RXDP bit field */ +#define ENET_RXDP_1BEAT DMA_BCTL_RXDP(1) /*!< maximum number of beats 1 */ +#define ENET_RXDP_2BEAT DMA_BCTL_RXDP(2) /*!< maximum number of beats 2 */ +#define ENET_RXDP_4BEAT DMA_BCTL_RXDP(4) /*!< maximum number of beats 4 */ +#define ENET_RXDP_8BEAT DMA_BCTL_RXDP(8) /*!< maximum number of beats 8 */ +#define ENET_RXDP_16BEAT DMA_BCTL_RXDP(16) /*!< maximum number of beats 16 */ +#define ENET_RXDP_32BEAT DMA_BCTL_RXDP(32) /*!< maximum number of beats 32 */ +#define ENET_RXDP_4xPGBL_4BEAT (DMA_BCTL_RXDP(1)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats 4 */ +#define ENET_RXDP_4xPGBL_8BEAT (DMA_BCTL_RXDP(2)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats 8 */ +#define ENET_RXDP_4xPGBL_16BEAT (DMA_BCTL_RXDP(4)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats 16 */ +#define ENET_RXDP_4xPGBL_32BEAT (DMA_BCTL_RXDP(8)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats 32 */ +#define ENET_RXDP_4xPGBL_64BEAT (DMA_BCTL_RXDP(16)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats 64 */ +#define ENET_RXDP_4xPGBL_128BEAT (DMA_BCTL_RXDP(32)|ENET_DMA_BCTL_FPBL) /*!< maximum number of beats 128 */ + +#define ENET_RXTX_DIFFERENT_PGBL ENET_DMA_BCTL_UIP /*!< RxDMA uses the RXDP[5:0], while TxDMA uses the PGBL[5:0] */ +#define ENET_RXTX_SAME_PGBL ((uint32_t)0x00000000) /*!< RxDMA/TxDMA uses PGBL[5:0] */ + +#define ENET_ADDRESS_ALIGN_ENABLE ENET_DMA_BCTL_AA /*!< enabled address-aligned */ +#define ENET_ADDRESS_ALIGN_DISABLE ((uint32_t)0x00000000) /*!< disable address-aligned */ + +/* dma_stat register value */ +#define GET_DMA_STAT_RP(regval) GET_BITS((uint32_t)(regval),17,19) /*!< get value of ENET_DMA_STAT_RP bit field */ +#define ENET_RX_STATE_STOPPED ((uint32_t)0x00000000) /*!< reset or stop rx command issued */ +#define ENET_RX_STATE_FETCHING BIT(17) /*!< fetching the Rx descriptor */ +#define ENET_RX_STATE_WAITING (BIT(17)|BIT(18)) /*!< waiting for receive packet */ +#define ENET_RX_STATE_SUSPENDED BIT(19) /*!< Rx descriptor unavailable */ +#define ENET_RX_STATE_CLOSING (BIT(17)|BIT(19)) /*!< closing receive descriptor */ +#define ENET_RX_STATE_QUEUING ENET_DMA_STAT_RP /*!< transferring the receive packet data from recevie buffer to host memory */ + +#define GET_DMA_STAT_TP(regval) GET_BITS((uint32_t)(regval),20,22) /*!< get value of ENET_DMA_STAT_TP bit field */ +#define ENET_TX_STATE_STOPPED ((uint32_t)0x00000000) /*!< reset or stop Tx Command issued */ +#define ENET_TX_STATE_FETCHING BIT(20) /*!< fetching the Tx descriptor */ +#define ENET_TX_STATE_WAITING BIT(21) /*!< waiting for status */ +#define ENET_TX_STATE_READING (BIT(20)|BIT(21)) /*!< reading the data from host memory buffer and queuing it to transmit buffer */ +#define ENET_TX_STATE_SUSPENDED (BIT(21)|BIT(22)) /*!< Tx descriptor unavailabe or transmit buffer underflow */ +#define ENET_TX_STATE_CLOSING ENET_DMA_STAT_TP /*!< closing Tx descriptor */ + +#define GET_DMA_STAT_EB(regval) GET_BITS((uint32_t)(regval),23,25) /*!< get value of ENET_DMA_STAT_EB bit field */ +#define ENET_ERROR_TXDATA_TRANSFER BIT(23) /*!< error during data transfer by TxDMA or RxDMA */ +#define ENET_ERROR_READ_TRANSFER BIT(24) /*!< error during write transfer or read transfer */ +#define ENET_ERROR_DESC_ACCESS BIT(25) /*!< error during descriptor or buffer access */ + +/* dma_ctl register value */ +#define DMA_CTL_RTHC(regval) (BITS(3,4) & ((uint32_t)(regval) << 3)) /*!< write value to ENET_DMA_CTL_RTHC bit field */ +#define ENET_RX_THRESHOLD_64BYTES DMA_CTL_RTHC(0) /*!< threshold level is 64 Bytes */ +#define ENET_RX_THRESHOLD_32BYTES DMA_CTL_RTHC(1) /*!< threshold level is 32 Bytes */ +#define ENET_RX_THRESHOLD_96BYTES DMA_CTL_RTHC(2) /*!< threshold level is 96 Bytes */ +#define ENET_RX_THRESHOLD_128BYTES DMA_CTL_RTHC(3) /*!< threshold level is 128 Bytes */ + +#define DMA_CTL_TTHC(regval) (BITS(14,16) & ((uint32_t)(regval) << 14)) /*!< write value to ENET_DMA_CTL_TTHC bit field */ +#define ENET_TX_THRESHOLD_64BYTES DMA_CTL_TTHC(0) /*!< threshold level is 64 Bytes */ +#define ENET_TX_THRESHOLD_128BYTES DMA_CTL_TTHC(1) /*!< threshold level is 128 Bytes */ +#define ENET_TX_THRESHOLD_192BYTES DMA_CTL_TTHC(2) /*!< threshold level is 192 Bytes */ +#define ENET_TX_THRESHOLD_256BYTES DMA_CTL_TTHC(3) /*!< threshold level is 256 Bytes */ +#define ENET_TX_THRESHOLD_40BYTES DMA_CTL_TTHC(4) /*!< threshold level is 40 Bytes */ +#define ENET_TX_THRESHOLD_32BYTES DMA_CTL_TTHC(5) /*!< threshold level is 32 Bytes */ +#define ENET_TX_THRESHOLD_24BYTES DMA_CTL_TTHC(6) /*!< threshold level is 24 Bytes */ +#define ENET_TX_THRESHOLD_16BYTES DMA_CTL_TTHC(7) /*!< threshold level is 16 Bytes */ + +#define ENET_TCPIP_CKSUMERROR_ACCEPT ENET_DMA_CTL_DTCERFD /*!< Rx frame with only payload error but no other errors will not be dropped */ +#define ENET_TCPIP_CKSUMERROR_DROP ((uint32_t)0x00000000) /*!< all error frames will be dropped when FERF = 0 */ + +#define ENET_RX_MODE_STOREFORWARD ENET_DMA_CTL_RSFD /*!< RxFIFO operates in store-and-forward mode */ +#define ENET_RX_MODE_CUTTHROUGH ((uint32_t)0x00000000) /*!< RxFIFO operates in cut-through mode */ + +#define ENET_FLUSH_RXFRAME_ENABLE ((uint32_t)0x00000000) /*!< RxDMA flushes all frames */ +#define ENET_FLUSH_RXFRAME_DISABLE ENET_DMA_CTL_DAFRF /*!< RxDMA does not flush any frames */ +#define ENET_NO_FLUSH_RXFRAME ENET_DMA_CTL_DAFRF /*!< RxDMA does not flush frames function */ + +#define ENET_TX_MODE_STOREFORWARD ENET_DMA_CTL_TSFD /*!< TxFIFO operates in store-and-forward mode */ +#define ENET_TX_MODE_CUTTHROUGH ((uint32_t)0x00000000) /*!< TxFIFO operates in cut-through mode */ + +#define ENET_FORWARD_ERRFRAMES_ENABLE (ENET_DMA_CTL_FERF<<2) /*!< all frame received with error except runt error are forwarded to memory */ +#define ENET_FORWARD_ERRFRAMES_DISABLE ((uint32_t)0x00000000) /*!< RxFIFO drop error frame */ +#define ENET_FORWARD_ERRFRAMES (ENET_DMA_CTL_FERF<<2) /*!< the function that all frame received with error except runt error are forwarded to memory */ + +#define ENET_FORWARD_UNDERSZ_GOODFRAMES_ENABLE (ENET_DMA_CTL_FUF<<2) /*!< forward undersized good frames */ +#define ENET_FORWARD_UNDERSZ_GOODFRAMES_DISABLE ((uint32_t)0x00000000) /*!< RxFIFO drops all frames whose length is less than 64 bytes */ +#define ENET_FORWARD_UNDERSZ_GOODFRAMES (ENET_DMA_CTL_FUF<<2) /*!< the function that forwarding undersized good frames */ + +#define ENET_SECONDFRAME_OPT_ENABLE ((uint32_t)0x00000000) /*!< TxDMA controller operate on second frame mode enable*/ +#define ENET_SECONDFRAME_OPT_DISABLE ((uint32_t)0x00000000) /*!< TxDMA controller operate on second frame mode disable */ +#define ENET_SECONDFRAME_OPT ENET_DMA_CTL_OSF /*!< TxDMA controller operate on second frame function */ + +/* dma_mfbocnt register value */ +#define GET_DMA_MFBOCNT_MSFC(regval) GET_BITS((regval),0,15) /*!< get value of ENET_DMA_MFBOCNT_MSFC bit field */ + +#define GET_DMA_MFBOCNT_MSFA(regval) GET_BITS((regval),17,27) /*!< get value of ENET_DMA_MFBOCNT_MSFA bit field */ + +/* dma tx descriptor tdes0 register value */ +#define TDES0_CONT(regval) (BITS(3,6) & ((uint32_t)(regval) << 3)) /*!< write value to ENET DMA TDES0 CONT bit field */ +#define GET_TDES0_COCNT(regval) GET_BITS((regval),3,6) /*!< get value of ENET DMA TDES0 CONT bit field */ + +#define TDES0_CM(regval) (BITS(22,23) & ((uint32_t)(regval) << 22)) /*!< write value to ENET DMA TDES0 CM bit field */ +#define ENET_CHECKSUM_DISABLE TDES0_CM(0) /*!< checksum insertion disabled */ +#define ENET_CHECKSUM_IPV4HEADER TDES0_CM(1) /*!< only IP header checksum calculation and insertion are enabled */ +#define ENET_CHECKSUM_TCPUDPICMP_SEGMENT TDES0_CM(2) /*!< TCP/UDP/ICMP checksum insertion calculated but pseudo-header */ +#define ENET_CHECKSUM_TCPUDPICMP_FULL TDES0_CM(3) /*!< TCP/UDP/ICMP checksum insertion fully calculated */ + +/* dma tx descriptor tdes1 register value */ +#define TDES1_TB1S(regval) (BITS(0,12) & ((uint32_t)(regval) << 0)) /*!< write value to ENET DMA TDES1 TB1S bit field */ + +#define TDES1_TB2S(regval) (BITS(16,28) & ((uint32_t)(regval) << 16)) /*!< write value to ENET DMA TDES1 TB2S bit field */ + +/* dma rx descriptor rdes0 register value */ +#define RDES0_FRML(regval) (BITS(16,29) & ((uint32_t)(regval) << 16)) /*!< write value to ENET DMA RDES0 FRML bit field */ +#define GET_RDES0_FRML(regval) GET_BITS((regval),16,29) /*!< get value of ENET DMA RDES0 FRML bit field */ + +/* dma rx descriptor rdes1 register value */ +#define ENET_RECEIVE_COMPLETE_INT_ENABLE ((uint32_t)0x00000000U) /*!< RS bit immediately set after Rx completed */ +#define ENET_RECEIVE_COMPLETE_INT_DISABLE ENET_RDES1_DINTC /*!< RS bit not immediately set after Rx completed */ + +#define GET_RDES1_RB1S(regval) GET_BITS((regval),0,12) /*!< get value of ENET DMA RDES1 RB1S bit field */ + +#define GET_RDES1_RB2S(regval) GET_BITS((regval),16,28) /*!< get value of ENET DMA RDES1 RB2S bit field */ + +/* dma rx descriptor rdes4 register value */ +#define RDES4_IPPLDT(regval) (BITS(0,2) & ((uint32_t)(regval) << 0)) /*!< write value to ENET DMA RDES4 IPPLDT bit field */ +#define GET_RDES4_IPPLDT(regval) GET_BITS((regval),0,2) /*!< get value of ENET DMA RDES4 IPPLDT bit field */ + +#define RDES4_PTPMT(regval) (BITS(8,11) & ((uint32_t)(regval) << 8)) /*!< write value to ENET DMA RDES4 PTPMT bit field */ +#define GET_RDES4_PTPMT(regval) GET_BITS((regval),8,11) /*!< get value of ENET DMA RDES4 PTPMT bit field */ + +/* ENET register mask value */ +#define MAC_CFG_MASK ((uint32_t)0xFD30810FU) /*!< ENET_MAC_CFG register mask */ +#define MAC_FCTL_MASK ((uint32_t)0x0000FF41U) /*!< ENET_MAC_FCTL register mask */ +#define DMA_CTL_MASK ((uint32_t)0xF8DE3F23U) /*!< ENET_DMA_CTL register mask */ +#define DMA_BCTL_MASK ((uint32_t)0xF800007DU) /*!< ENET_DMA_BCTL register mask */ + +#define ETH_DMATXDESC_SIZE 0x10U /*!< TxDMA descriptor size */ +#define ETH_DMARXDESC_SIZE 0x10U /*!< RxDMA descriptor size */ + +typedef enum{ + ENET_PTP_SYSTIME_INIT = ENET_PTP_TSCTL_TMSSTI, /*!< timestamp initialize */ + ENET_PTP_SYSTIME_UPDATE = ENET_PTP_TSCTL_TMSSTU, /*!< timestamp update */ + ENET_PTP_ADDEND_UPDATE = ENET_PTP_TSCTL_TMSARU, /*!< addend register update */ + ENET_PTP_FINEMODE = (int32_t)(ENET_PTP_TSCTL_TMSFCU| BIT(31)), /*!< the system timestamp uses the fine method for updating */ + ENET_PTP_COARSEMODE = ENET_PTP_TSCTL_TMSFCU, /*!< the system timestamp uses the coarse method for updating */ +}enet_ptp_function_enum; + + +/* ENET remote wake-up frame register length */ +#define ETH_WAKEUP_REGISTER_LENGTH 8U /*!< remote wake-up frame register length */ + +/* ENET frame size */ +#define ENET_MAX_FRAME_SIZE 1524U /*!< header + frame_extra + payload + CRC */ + +/* ENET delay timeout */ +#define ENET_DELAY_TO ((uint32_t)0x0004FFFFU) /*!< ENET delay timeout */ +#define ENET_RESET_TO ((uint32_t)0x000004FFU) /*!< ENET reset timeout */ + +/* function declarations */ +/* main function */ +/* deinitialize the ENET, and reset structure parameters for ENET initialization */ +void enet_deinit(void); +/* configure the parameters which are usually less cared for initialization */ +void enet_initpara_config(enet_option_enum option, uint32_t para); +/* initialize ENET peripheral with generally concerned parameters and the less cared parameters */ +ErrStatus enet_init(enet_mediamode_enum mediamode, enet_chksumconf_enum checksum, enet_frmrecept_enum recept); +/* reset all core internal registers located in CLK_TX and CLK_RX */ +ErrStatus enet_software_reset(void); +/* check receive frame valid and return frame size */ +uint32_t enet_rxframe_size_get(void); +/* initialize the dma tx/rx descriptors's parameters in chain mode */ +void enet_descriptors_chain_init(enet_dmadirection_enum direction); +/* initialize the dma tx/rx descriptors's parameters in ring mode */ +void enet_descriptors_ring_init(enet_dmadirection_enum direction); +/* handle current received frame data to application buffer */ +ErrStatus enet_frame_receive(uint8_t *buffer, uint32_t bufsize); +/* handle current received frame but without data copy to application buffer */ +#define ENET_NOCOPY_FRAME_RECEIVE() enet_frame_receive(NULL, 0U) +/* handle application buffer data to transmit it */ +ErrStatus enet_frame_transmit(uint8_t *buffer, uint32_t length); +/* handle current transmit frame but without data copy from application buffer */ +#define ENET_NOCOPY_FRAME_TRANSMIT(len) enet_frame_transmit(NULL, (len)) +/* configure the transmit IP frame checksum offload calculation and insertion */ +void enet_transmit_checksum_config(enet_descriptors_struct *desc, uint32_t checksum); +/* ENET Tx and Rx function enable (include MAC and DMA module) */ +void enet_enable(void); +/* ENET Tx and Rx function disable (include MAC and DMA module) */ +void enet_disable(void); +/* configure MAC address */ +void enet_mac_address_set(enet_macaddress_enum mac_addr, uint8_t paddr[]); +/* get MAC address */ +void enet_mac_address_get(enet_macaddress_enum mac_addr, uint8_t paddr[]); + +/* get the ENET MAC/MSC/PTP/DMA status flag */ +FlagStatus enet_flag_get(enet_flag_enum enet_flag); +/* clear the ENET DMA status flag */ +void enet_flag_clear(enet_flag_clear_enum enet_flag); +/* enable ENET MAC/MSC/DMA interrupt */ +void enet_interrupt_enable(enet_int_enum enet_int); +/* disable ENET MAC/MSC/DMA interrupt */ +void enet_interrupt_disable(enet_int_enum enet_int); +/* get ENET MAC/MSC/DMA interrupt flag */ +FlagStatus enet_interrupt_flag_get(enet_int_flag_enum int_flag); +/* clear ENET DMA interrupt flag */ +void enet_interrupt_flag_clear(enet_int_flag_clear_enum int_flag_clear); + +/* MAC function */ +/* ENET Tx function enable (include MAC and DMA module) */ +void enet_tx_enable(void); +/* ENET Tx function disable (include MAC and DMA module) */ +void enet_tx_disable(void); +/* ENET Rx function enable (include MAC and DMA module) */ +void enet_rx_enable(void); +/* ENET Rx function disable (include MAC and DMA module) */ +void enet_rx_disable(void); +/* put registers value into the application buffer */ +void enet_registers_get(enet_registers_type_enum type, uint32_t *preg, uint32_t num); +/* enable the MAC address filter */ +void enet_address_filter_enable(enet_macaddress_enum mac_addr); +/* disable the MAC address filter */ +void enet_address_filter_disable(enet_macaddress_enum mac_addr); +/* configure the MAC address filter */ +void enet_address_filter_config(enet_macaddress_enum mac_addr, uint32_t addr_mask, uint32_t filter_type); +/* PHY interface configuration (configure SMI clock and reset PHY chip) */ +ErrStatus enet_phy_config(void); +/* write to/read from a PHY register */ +ErrStatus enet_phy_write_read(enet_phydirection_enum direction, uint16_t phy_address, uint16_t phy_reg, uint16_t *pvalue); +/* enable the loopback function of phy chip */ +ErrStatus enet_phyloopback_enable(void); +/* disable the loopback function of phy chip */ +ErrStatus enet_phyloopback_disable(void); +/* enable ENET forward feature */ +void enet_forward_feature_enable(uint32_t feature); +/* disable ENET forward feature */ +void enet_forward_feature_disable(uint32_t feature); +/* enable ENET fliter feature */ +void enet_fliter_feature_enable(uint32_t feature); +/* disable ENET fliter feature */ +void enet_fliter_feature_disable(uint32_t feature); + +/* flow control function */ +/* generate the pause frame, ENET will send pause frame after enable transmit flow control */ +ErrStatus enet_pauseframe_generate(void); +/* configure the pause frame detect type */ +void enet_pauseframe_detect_config(uint32_t detect); +/* configure the pause frame parameters */ +void enet_pauseframe_config(uint32_t pausetime, uint32_t pause_threshold); +/* configure the threshold of the flow control(deactive and active threshold) */ +void enet_flowcontrol_threshold_config(uint32_t deactive, uint32_t active); +/* enable ENET flow control feature */ +void enet_flowcontrol_feature_enable(uint32_t feature); +/* disable ENET flow control feature */ +void enet_flowcontrol_feature_disable(uint32_t feature); + +/* DMA function */ +/* get the dma transmit/receive process state */ +uint32_t enet_dmaprocess_state_get(enet_dmadirection_enum direction); +/* poll the dma transmission/reception enable */ +void enet_dmaprocess_resume(enet_dmadirection_enum direction); +/* check and recover the Rx process */ +void enet_rxprocess_check_recovery(void); +/* flush the ENET transmit fifo, and wait until the flush operation completes */ +ErrStatus enet_txfifo_flush(void); +/* get the transmit/receive address of current descriptor, or current buffer, or descriptor table */ +uint32_t enet_current_desc_address_get(enet_desc_reg_enum addr_get); +/* get the Tx or Rx descriptor information */ +uint32_t enet_desc_information_get(enet_descriptors_struct *desc, enet_descstate_enum info_get); +/* get the number of missed frames during receiving */ +void enet_missed_frame_counter_get(uint32_t *rxfifo_drop, uint32_t *rxdma_drop); + +/* descriptor function */ +/* get the bit flag of ENET dma descriptor */ +FlagStatus enet_desc_flag_get(enet_descriptors_struct *desc, uint32_t desc_flag); +/* set the bit flag of ENET dma tx descriptor */ +void enet_desc_flag_set(enet_descriptors_struct *desc, uint32_t desc_flag); +/* clear the bit flag of ENET dma tx descriptor */ +void enet_desc_flag_clear(enet_descriptors_struct *desc, uint32_t desc_flag); +/* when receiving the completed, set RS bit in ENET_DMA_STAT register will set */ +void enet_desc_receive_complete_bit_enable(enet_descriptors_struct *desc); +/* when receiving the completed, set RS bit in ENET_DMA_STAT register will not set */ +void enet_desc_receive_complete_bit_disable(enet_descriptors_struct *desc); +/* drop current receive frame */ +void enet_rxframe_drop(void); +/* enable DMA feature */ +void enet_dma_feature_enable(uint32_t feature); +/* disable DMA feature */ +void enet_dma_feature_disable(uint32_t feature); + +/* initialize the dma Tx/Rx descriptors's parameters in normal chain mode with ptp function */ +void enet_ptp_normal_descriptors_chain_init(enet_dmadirection_enum direction, enet_descriptors_struct *desc_ptptab); +/* initialize the dma Tx/Rx descriptors's parameters in normal ring mode with ptp function */ +void enet_ptp_normal_descriptors_ring_init(enet_dmadirection_enum direction, enet_descriptors_struct *desc_ptptab); +/* receive a packet data with timestamp values to application buffer, when the DMA is in normal mode */ +ErrStatus enet_ptpframe_receive_normal_mode(uint8_t *buffer, uint32_t bufsize, uint32_t timestamp[]); +/* handle current received frame but without data copy to application buffer in PTP normal mode */ +#define ENET_NOCOPY_PTPFRAME_RECEIVE_NORMAL_MODE(ptr) enet_ptpframe_receive_normal_mode(NULL, 0U, (ptr)) +/* send data with timestamp values in application buffer as a transmit packet, when the DMA is in normal mode */ +ErrStatus enet_ptpframe_transmit_normal_mode(uint8_t *buffer, uint32_t length, uint32_t timestamp[]); +/* handle current transmit frame but without data copy from application buffer in PTP normal mode */ +#define ENET_NOCOPY_PTPFRAME_TRANSMIT_NORMAL_MODE(len, ptr) enet_ptpframe_transmit_normal_mode(NULL, (len), (ptr)) + +/* WUM function */ +/* wakeup frame filter register pointer reset */ +void enet_wum_filter_register_pointer_reset(void); +/* set the remote wakeup frame registers */ +void enet_wum_filter_config(uint32_t pdata[]); +/* enable wakeup management features */ +void enet_wum_feature_enable(uint32_t feature); +/* disable wakeup management features */ +void enet_wum_feature_disable(uint32_t feature); + +/* MSC function */ +/* reset the MAC statistics counters */ +void enet_msc_counters_reset(void); +/* enable the MAC statistics counter features */ +void enet_msc_feature_enable(uint32_t feature); +/* disable the MAC statistics counter features */ +void enet_msc_feature_disable(uint32_t feature); +/* get MAC statistics counter */ +uint32_t enet_msc_counters_get(enet_msc_counter_enum counter); + +/* PTP function */ +/* change subsecond to nanosecond */ +uint32_t enet_ptp_subsecond_2_nanosecond(uint32_t subsecond); +/* change nanosecond to subsecond */ +uint32_t enet_ptp_nanosecond_2_subsecond(uint32_t nanosecond); +/* enable the PTP features */ +void enet_ptp_feature_enable(uint32_t feature); +/* disable the PTP features */ +void enet_ptp_feature_disable(uint32_t feature); +/* configure the PTP timestamp function */ +ErrStatus enet_ptp_timestamp_function_config(enet_ptp_function_enum func); +/* configure the PTP system time subsecond increment value */ +void enet_ptp_subsecond_increment_config(uint32_t subsecond); +/* adjusting the PTP clock frequency only in fine update mode */ +void enet_ptp_timestamp_addend_config(uint32_t add); +/* initializing or adding/subtracting to second of the PTP system time */ +void enet_ptp_timestamp_update_config(uint32_t sign, uint32_t second, uint32_t subsecond); +/* configure the PTP expected target time */ +void enet_ptp_expected_time_config(uint32_t second, uint32_t nanosecond); +/* get the PTP current system time */ +void enet_ptp_system_time_get(enet_ptp_systime_struct *systime_struct); +/* configure and start PTP timestamp counter */ +void enet_ptp_start(int32_t updatemethod, uint32_t init_sec, uint32_t init_subsec, uint32_t carry_cfg, uint32_t accuracy_cfg); +/* adjust frequency in fine method by configure addend register */ +void enet_ptp_finecorrection_adjfreq(int32_t carry_cfg); +/* update system time in coarse method */ +void enet_ptp_coarsecorrection_systime_update(enet_ptp_systime_struct *systime_struct); +/* set system time in fine method */ +void enet_ptp_finecorrection_settime(enet_ptp_systime_struct * systime_struct); +/* get the ptp flag status */ +FlagStatus enet_ptp_flag_get(uint32_t flag); + +/* internal function */ +/* reset the ENET initpara struct, call it before using enet_initpara_config() */ +void enet_initpara_reset(void); +/* initialize ENET peripheral with generally concerned parameters, call it by enet_init() */ +static void enet_default_init(void); +#ifdef USE_DELAY +/* user can provide more timing precise _ENET_DELAY_ function */ +#define _ENET_DELAY_ delay_ms +#else +/* insert a delay time */ +static void enet_delay(uint32_t ncount); +/* default _ENET_DELAY_ function with less precise timing */ +#define _ENET_DELAY_ enet_delay +#endif + +#endif /* GD32F10X_ENET_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_exmc.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_exmc.h new file mode 100644 index 0000000000000000000000000000000000000000..b9b1478a04305bcfbd60e455d1b4737e21a863cf --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_exmc.h @@ -0,0 +1,432 @@ +/*! + \file gd32f10x_exmc.h + \brief definitions for the EXMC + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_EXMC_H +#define GD32F10X_EXMC_H + +#include "gd32f10x.h" + +/* EXMC definitions */ +#define EXMC (EXMC_BASE) /*!< EXMC register base address */ + +/* registers definitions */ +/* NOR/PSRAM */ +#define EXMC_SNCTL0 REG32(EXMC + 0x00U) /*!< EXMC SRAM/NOR flash control register 0 */ +#define EXMC_SNTCFG0 REG32(EXMC + 0x04U) /*!< EXMC SRAM/NOR flash timing configuration register 0 */ +#define EXMC_SNWTCFG0 REG32(EXMC + 0x104U) /*!< EXMC SRAM/NOR flash write timing configuration register 0 */ + +#define EXMC_SNCTL1 REG32(EXMC + 0x08U) /*!< EXMC SRAM/NOR flash control register 1 */ +#define EXMC_SNTCFG1 REG32(EXMC + 0x0CU) /*!< EXMC SRAM/NOR flash timing configuration register 1 */ +#define EXMC_SNWTCFG1 REG32(EXMC + 0x10CU) /*!< EXMC SRAM/NOR flash write timing configuration register 1 */ + +#define EXMC_SNCTL2 REG32(EXMC + 0x10U) /*!< EXMC SRAM/NOR flash control register 2 */ +#define EXMC_SNTCFG2 REG32(EXMC + 0x14U) /*!< EXMC SRAM/NOR flash timing configuration register 2 */ +#define EXMC_SNWTCFG2 REG32(EXMC + 0x114U) /*!< EXMC SRAM/NOR flash write timing configuration register 2 */ + +#define EXMC_SNCTL3 REG32(EXMC + 0x18U) /*!< EXMC SRAM/NOR flash control register 3 */ +#define EXMC_SNTCFG3 REG32(EXMC + 0x1CU) /*!< EXMC SRAM/NOR flash timing configuration register 3 */ +#define EXMC_SNWTCFG3 REG32(EXMC + 0x11CU) /*!< EXMC SRAM/NOR flash write timing configuration register 3 */ + +/* NAND/PC card */ +#define EXMC_NPCTL1 REG32(EXMC + 0x60U) /*!< EXMC NAND/PC card control register 1 */ +#define EXMC_NPINTEN1 REG32(EXMC + 0x64U) /*!< EXMC NAND/PC card interrupt enable register 1 */ +#define EXMC_NPCTCFG1 REG32(EXMC + 0x68U) /*!< EXMC NAND/PC card common space timing configuration register 1 */ +#define EXMC_NPATCFG1 REG32(EXMC + 0x6CU) /*!< EXMC NAND/PC card attribute space timing configuration register 1 */ +#define EXMC_NECC1 REG32(EXMC + 0x74U) /*!< EXMC NAND ECC register 1 */ + +#define EXMC_NPCTL2 REG32(EXMC + 0x80U) /*!< EXMC NAND/PC card control register 2 */ +#define EXMC_NPINTEN2 REG32(EXMC + 0x84U) /*!< EXMC NAND/PC card interrupt enable register 2 */ +#define EXMC_NPCTCFG2 REG32(EXMC + 0x88U) /*!< EXMC NAND/PC card common space timing configuration register 2 */ +#define EXMC_NPATCFG2 REG32(EXMC + 0x8CU) /*!< EXMC NAND/PC card attribute space timing configuration register 2 */ +#define EXMC_NECC2 REG32(EXMC + 0x94U) /*!< EXMC NAND ECC register 2 */ + +#define EXMC_NPCTL3 REG32(EXMC + 0xA0U) /*!< EXMC NAND/PC card control register 3 */ +#define EXMC_NPINTEN3 REG32(EXMC + 0xA4U) /*!< EXMC NAND/PC card interrupt enable register 3 */ +#define EXMC_NPCTCFG3 REG32(EXMC + 0xA8U) /*!< EXMC NAND/PC card common space timing configuration register 3 */ +#define EXMC_NPATCFG3 REG32(EXMC + 0xACU) /*!< EXMC NAND/PC card attribute space timing configuration register 3 */ +#define EXMC_PIOTCFG3 REG32(EXMC + 0xB0U) /*!< EXMC PC card I/O space timing configuration register */ + +/* bits definitions */ +/* NOR/PSRAM */ +/* EXMC_SNCTLx,x=0..3 */ +#define EXMC_SNCTL_NRBKEN BIT(0) /*!< NOR bank enable */ +#define EXMC_SNCTL_NRMUX BIT(1) /*!< NOR bank memory address/data multiplexing */ +#define EXMC_SNCTL_NRTP BITS(2,3) /*!< NOR bank memory type */ +#define EXMC_SNCTL_NRW BITS(4,5) /*!< NOR bank memory data bus width */ +#define EXMC_SNCTL_NREN BIT(6) /*!< NOR flash access enable */ +#define EXMC_SNCTL_SBRSTEN BIT(8) /*!< synchronous burst enable */ +#define EXMC_SNCTL_NRWTPOL BIT(9) /*!< NWAIT signal polarity */ +#define EXMC_SNCTL_WRAPEN BIT(10) /*!< wrapped burst mode enable */ +#define EXMC_SNCTL_NRWTCFG BIT(11) /*!< NWAIT signal configuration, only work in synchronous mode */ +#define EXMC_SNCTL_WREN BIT(12) /*!< write enable */ +#define EXMC_SNCTL_NRWTEN BIT(13) /*!< NWAIT signal enable */ +#define EXMC_SNCTL_EXMODEN BIT(14) /*!< extended mode enable */ +#define EXMC_SNCTL_ASYNCWAIT BIT(15) /*!< asynchronous wait */ +#define EXMC_SNCTL_SYNCWR BIT(19) /*!< synchronous write */ + +/* EXMC_SNTCFGx,x=0..3 */ +#define EXMC_SNTCFG_ASET BITS(0,3) /*!< address setup time */ +#define EXMC_SNTCFG_AHLD BITS(4,7) /*!< address hold time */ +#define EXMC_SNTCFG_DSET BITS(8,15) /*!< data setup time */ +#define EXMC_SNTCFG_BUSLAT BITS(16,19) /*!< bus latency */ +#define EXMC_SNTCFG_CKDIV BITS(20,23) /*!< synchronous clock divide ratio */ +#define EXMC_SNTCFG_DLAT BITS(24,27) /*!< data latency for NOR flash */ +#define EXMC_SNTCFG_ASYNCMOD BITS(28,29) /*!< asynchronous access mode */ + +/* EXMC_SNWTCFGx,x=0..3 */ +#define EXMC_SNWTCFG_WASET BITS(0,3) /*!< address setup time */ +#define EXMC_SNWTCFG_WAHLD BITS(4,7) /*!< address hold time */ +#define EXMC_SNWTCFG_WDSET BITS(8,15) /*!< data setup time */ +#define EXMC_SNWTCFG_CKDIV BITS(20,23) /*!< synchronous clock divide ratio */ +#define EXMC_SNWTCFG_DLAT BITS(24,27) /*!< data latency for NOR flash */ +#define EXMC_SNWTCFG_WASYNCMOD BITS(28,29) /*!< asynchronous access mode */ + +/* NAND/PC card */ +/* EXMC_NPCTLx,x=1..3 */ +#define EXMC_NPCTL_NDWTEN BIT(1) /*!< wait feature enable */ +#define EXMC_NPCTL_NDBKEN BIT(2) /*!< NAND bank enable */ +#define EXMC_NPCTL_NDTP BIT(3) /*!< NAND bank memory type */ +#define EXMC_NPCTL_NDW BITS(4,5) /*!< NAND bank memory data bus width */ +#define EXMC_NPCTL_ECCEN BIT(6) /*!< ECC enable */ +#define EXMC_NPCTL_CTR BITS(9,12) /*!< CLE to RE delay */ +#define EXMC_NPCTL_ATR BITS(13,16) /*!< ALE to RE delay */ +#define EXMC_NPCTL_ECCSZ BITS(17,19) /*!< ECC size */ + +/* EXMC_NPINTENx,x=1..3 */ +#define EXMC_NPINTEN_INTRS BIT(0) /*!< interrupt rising edge status */ +#define EXMC_NPINTEN_INTHS BIT(1) /*!< interrupt high-level status */ +#define EXMC_NPINTEN_INTFS BIT(2) /*!< interrupt falling edge status */ +#define EXMC_NPINTEN_INTREN BIT(3) /*!< interrupt rising edge detection enable */ +#define EXMC_NPINTEN_INTHEN BIT(4) /*!< interrupt high-level detection enable */ +#define EXMC_NPINTEN_INTFEN BIT(5) /*!< interrupt falling edge detection enable */ +#define EXMC_NPINTEN_FFEPT BIT(6) /*!< FIFO empty flag */ + +/* EXMC_NPCTCFGx,x=1..3 */ +#define EXMC_NPCTCFG_COMSET BITS(0,7) /*!< common memory setup time */ +#define EXMC_NPCTCFG_COMWAIT BITS(8,15) /*!< common memory wait time */ +#define EXMC_NPCTCFG_COMHLD BITS(16,23) /*!< common memory hold time */ +#define EXMC_NPCTCFG_COMHIZ BITS(24,31) /*!< common memory data bus HiZ time */ + +/* EXMC_NPATCFGx,x=1..3 */ +#define EXMC_NPATCFG_ATTSET BITS(0,7) /*!< attribute memory setup time */ +#define EXMC_NPATCFG_ATTWAIT BITS(8,15) /*!< attribute memory wait time */ +#define EXMC_NPATCFG_ATTHLD BITS(16,23) /*!< attribute memory hold time */ +#define EXMC_NPATCFG_ATTHIZ BITS(24,31) /*!< attribute memory data bus HiZ time */ + +/* EXMC_PIOTCFG3 */ +#define EXMC_PIOTCFG3_IOSET BITS(0,7) /*!< IO space setup time */ +#define EXMC_PIOTCFG3_IOWAIT BITS(8,15) /*!< IO space wait time */ +#define EXMC_PIOTCFG3_IOHLD BITS(16,23) /*!< IO space hold time */ +#define EXMC_PIOTCFG3_IOHIZ BITS(24,31) /*!< IO space data bus HiZ time */ + +/* EXMC_NECCx,x=1,2 */ +#define EXMC_NECC_ECC BITS(0,31) /*!< ECC result */ + +/* constants definitions */ +/* EXMC NOR/SRAM timing initialize struct */ +typedef struct +{ + uint32_t asyn_access_mode; /*!< asynchronous access mode */ + uint32_t syn_data_latency; /*!< configure the data latency */ + uint32_t syn_clk_division; /*!< configure the clock divide ratio */ + uint32_t bus_latency; /*!< configure the bus latency */ + uint32_t asyn_data_setuptime; /*!< configure the data setup time,asynchronous access mode valid */ + uint32_t asyn_address_holdtime; /*!< configure the address hold time,asynchronous access mode valid */ + uint32_t asyn_address_setuptime; /*!< configure the data setup time,asynchronous access mode valid */ +}exmc_norsram_timing_parameter_struct; + +/* EXMC NOR/SRAM initialize struct */ +typedef struct +{ + uint32_t norsram_region; /*!< select the region of EXMC NOR/SRAM bank */ + uint32_t write_mode; /*!< the write mode, synchronous mode or asynchronous mode */ + uint32_t extended_mode; /*!< enable or disable the extended mode */ + uint32_t asyn_wait; /*!< enable or disable the asynchronous wait function */ + uint32_t nwait_signal; /*!< enable or disable the NWAIT signal while in synchronous bust mode */ + uint32_t memory_write; /*!< enable or disable the write operation */ + uint32_t nwait_config; /*!< NWAIT signal configuration */ + uint32_t wrap_burst_mode; /*!< enable or disable the wrap burst mode */ + uint32_t nwait_polarity; /*!< specifies the polarity of NWAIT signal from memory */ + uint32_t burst_mode; /*!< enable or disable the burst mode */ + uint32_t databus_width; /*!< specifies the databus width of external memory */ + uint32_t memory_type; /*!< specifies the type of external memory */ + uint32_t address_data_mux; /*!< specifies whether the data bus and address bus are multiplexed */ + exmc_norsram_timing_parameter_struct* read_write_timing; /*!< timing parameters for read and write if the extended mode is not used or the timing + parameters for read if the extended mode is used */ + exmc_norsram_timing_parameter_struct* write_timing; /*!< timing parameters for write when the extended mode is used */ +}exmc_norsram_parameter_struct; + +/* EXMC NAND/PC card timing initialize struct */ +typedef struct +{ + uint32_t databus_hiztime; /*!< configure the dadtabus HiZ time for write operation */ + uint32_t holdtime; /*!< configure the address hold time(or the data hold time for write operation) */ + uint32_t waittime; /*!< configure the minimum wait time */ + uint32_t setuptime; /*!< configure the address setup time */ +}exmc_nand_pccard_timing_parameter_struct; + +/* EXMC NAND initialize struct */ +typedef struct +{ + uint32_t nand_bank; /*!< select the bank of NAND */ + uint32_t ecc_size; /*!< the page size for the ECC calculation */ + uint32_t atr_latency; /*!< configure the latency of ALE low to RB low */ + uint32_t ctr_latency; /*!< configure the latency of CLE low to RB low */ + uint32_t ecc_logic; /*!< enable or disable the ECC calculation logic */ + uint32_t databus_width; /*!< the NAND flash databus width */ + uint32_t wait_feature; /*!< enables or disables the wait feature */ + exmc_nand_pccard_timing_parameter_struct* common_space_timing; /*!< the timing parameters for NAND flash common space */ + exmc_nand_pccard_timing_parameter_struct* attribute_space_timing; /*!< the timing parameters for NAND flash attribute space */ +}exmc_nand_parameter_struct; + +/* EXMC PC card initialize struct */ +typedef struct +{ + uint32_t atr_latency; /*!< configure the latency of ALE low to RB low */ + uint32_t ctr_latency; /*!< configure the latency of CLE low to RB low */ + uint32_t wait_feature; /*!< enables or disables the Wait feature */ + exmc_nand_pccard_timing_parameter_struct* common_space_timing; /*!< the timing parameters for NAND flash common space */ + exmc_nand_pccard_timing_parameter_struct* attribute_space_timing; /*!< the timing parameters for NAND flash attribute space */ + exmc_nand_pccard_timing_parameter_struct* io_space_timing; /*!< the timing parameters for NAND flash IO space */ +}exmc_pccard_parameter_struct;; + +/* EXMC register address */ +#define EXMC_SNCTL(region) REG32(EXMC + 0x08U * (region)) /*!< EXMC SRAM/NOR flash control register */ +#define EXMC_SNTCFG(region) REG32(EXMC + 0x04U + 0x08U * (region)) /*!< EXMC SRAM/NOR flash timing configuration register */ +#define EXMC_SNWTCFG(region) REG32(EXMC + 0x104U + 0x08U * (region)) /*!< EXMC SRAM/NOR flash write timing configuration register */ + +#define EXMC_NPCTL(bank) REG32(EXMC + 0x40U + 0x20U * (bank)) /*!< EXMC NAND/PC card control register */ +#define EXMC_NPINTEN(bank) REG32(EXMC + 0x44U + 0x20U * (bank)) /*!< EXMC NAND/PC card interrupt enable register */ +#define EXMC_NPCTCFG(bank) REG32(EXMC + 0x48U + 0x20U * (bank)) /*!< EXMC NAND/PC card common space timing configuration register */ +#define EXMC_NPATCFG(bank) REG32(EXMC + 0x4CU + 0x20U * (bank)) /*!< EXMC NAND/PC card attribute space timing configuration register */ +#define EXMC_NECC(bank) REG32(EXMC + 0x54U + 0x20U * (bank)) /*!< EXMC NAND ECC register */ + +/* NOR bank memory data bus width */ +#define SNCTL_NRW(regval) (BITS(4,5) & ((uint32_t)(regval) << 4)) +#define EXMC_NOR_DATABUS_WIDTH_8B SNCTL_NRW(0) /*!< NOR data width 8 bits */ +#define EXMC_NOR_DATABUS_WIDTH_16B SNCTL_NRW(1) /*!< NOR data width 16 bits */ + +/* NOR bank memory type */ +#define SNCTL_NRTP(regval) (BITS(2,3) & ((uint32_t)(regval) << 2)) +#define EXMC_MEMORY_TYPE_SRAM SNCTL_NRTP(0) /*!< SRAM,ROM */ +#define EXMC_MEMORY_TYPE_PSRAM SNCTL_NRTP(1) /*!< PSRAM,CRAM */ +#define EXMC_MEMORY_TYPE_NOR SNCTL_NRTP(2) /*!< NOR flash */ + +/* asynchronous access mode */ +#define SNTCFG_ASYNCMOD(regval) (BITS(28,29) & ((uint32_t)(regval) << 28)) +#define EXMC_ACCESS_MODE_A SNTCFG_ASYNCMOD(0) /*!< mode A access */ +#define EXMC_ACCESS_MODE_B SNTCFG_ASYNCMOD(1) /*!< mode B access */ +#define EXMC_ACCESS_MODE_C SNTCFG_ASYNCMOD(2) /*!< mode C access */ +#define EXMC_ACCESS_MODE_D SNTCFG_ASYNCMOD(3) /*!< mode D access */ + +/* data latency for NOR flash */ +#define SNTCFG_DLAT(regval) (BITS(24,27) & ((uint32_t)(regval) << 24)) +#define EXMC_DATALAT_2_CLK SNTCFG_DLAT(0) /*!< data latency 2 EXMC_CLK */ +#define EXMC_DATALAT_3_CLK SNTCFG_DLAT(1) /*!< data latency 3 EXMC_CLK */ +#define EXMC_DATALAT_4_CLK SNTCFG_DLAT(2) /*!< data latency 4 EXMC_CLK */ +#define EXMC_DATALAT_5_CLK SNTCFG_DLAT(3) /*!< data latency 5 EXMC_CLK */ +#define EXMC_DATALAT_6_CLK SNTCFG_DLAT(4) /*!< data latency 6 EXMC_CLK */ +#define EXMC_DATALAT_7_CLK SNTCFG_DLAT(5) /*!< data latency 7 EXMC_CLK */ +#define EXMC_DATALAT_8_CLK SNTCFG_DLAT(6) /*!< data latency 8 EXMC_CLK */ +#define EXMC_DATALAT_9_CLK SNTCFG_DLAT(7) /*!< data latency 9 EXMC_CLK */ +#define EXMC_DATALAT_10_CLK SNTCFG_DLAT(8) /*!< data latency 10 EXMC_CLK */ +#define EXMC_DATALAT_11_CLK SNTCFG_DLAT(9) /*!< data latency 11 EXMC_CLK */ +#define EXMC_DATALAT_12_CLK SNTCFG_DLAT(10) /*!< data latency 12 EXMC_CLK */ +#define EXMC_DATALAT_13_CLK SNTCFG_DLAT(11) /*!< data latency 13 EXMC_CLK */ +#define EXMC_DATALAT_14_CLK SNTCFG_DLAT(12) /*!< data latency 14 EXMC_CLK */ +#define EXMC_DATALAT_15_CLK SNTCFG_DLAT(13) /*!< data latency 15 EXMC_CLK */ +#define EXMC_DATALAT_16_CLK SNTCFG_DLAT(14) /*!< data latency 16 EXMC_CLK */ +#define EXMC_DATALAT_17_CLK SNTCFG_DLAT(15) /*!< data latency 17 EXMC_CLK */ + +/* synchronous clock divide ratio */ +#define SNTCFG_CKDIV(regval) (BITS(20,23) & ((uint32_t)(regval) << 20)) +#define EXMC_SYN_CLOCK_RATIO_DISABLE SNTCFG_CKDIV(0) /*!< EXMC_CLK disable */ +#define EXMC_SYN_CLOCK_RATIO_2_CLK SNTCFG_CKDIV(1) /*!< EXMC_CLK = 2*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_3_CLK SNTCFG_CKDIV(2) /*!< EXMC_CLK = 3*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_4_CLK SNTCFG_CKDIV(3) /*!< EXMC_CLK = 4*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_5_CLK SNTCFG_CKDIV(4) /*!< EXMC_CLK = 5*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_6_CLK SNTCFG_CKDIV(5) /*!< EXMC_CLK = 6*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_7_CLK SNTCFG_CKDIV(6) /*!< EXMC_CLK = 7*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_8_CLK SNTCFG_CKDIV(7) /*!< EXMC_CLK = 8*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_9_CLK SNTCFG_CKDIV(8) /*!< EXMC_CLK = 9*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_10_CLK SNTCFG_CKDIV(9) /*!< EXMC_CLK = 10*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_11_CLK SNTCFG_CKDIV(10) /*!< EXMC_CLK = 11*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_12_CLK SNTCFG_CKDIV(11) /*!< EXMC_CLK = 12*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_13_CLK SNTCFG_CKDIV(12) /*!< EXMC_CLK = 13*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_14_CLK SNTCFG_CKDIV(13) /*!< EXMC_CLK = 14*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_15_CLK SNTCFG_CKDIV(14) /*!< EXMC_CLK = 15*HCLK */ +#define EXMC_SYN_CLOCK_RATIO_16_CLK SNTCFG_CKDIV(15) /*!< EXMC_CLK = 16*HCLK */ + +/* ECC size */ +#define NPCTL_ECCSZ(regval) (BITS(17,19) & ((uint32_t)(regval) << 17)) +#define EXMC_ECC_SIZE_256BYTES NPCTL_ECCSZ(0) /* 256 bytes */ +#define EXMC_ECC_SIZE_512BYTES NPCTL_ECCSZ(1) /* 512 bytes */ +#define EXMC_ECC_SIZE_1024BYTES NPCTL_ECCSZ(2) /* 1024 bytes */ +#define EXMC_ECC_SIZE_2048BYTES NPCTL_ECCSZ(3) /* 2048 bytes */ +#define EXMC_ECC_SIZE_4096BYTES NPCTL_ECCSZ(4) /* 4096 bytes */ +#define EXMC_ECC_SIZE_8192BYTES NPCTL_ECCSZ(5) /* 8192 bytes */ + +/* ALE to RE delay */ +#define NPCTL_ATR(regval) (BITS(13,16) & ((uint32_t)(regval) << 13)) +#define EXMC_ALE_RE_DELAY_1_HCLK NPCTL_ATR(0) /* ALE to RE delay = 1*HCLK */ +#define EXMC_ALE_RE_DELAY_2_HCLK NPCTL_ATR(1) /* ALE to RE delay = 2*HCLK */ +#define EXMC_ALE_RE_DELAY_3_HCLK NPCTL_ATR(2) /* ALE to RE delay = 3*HCLK */ +#define EXMC_ALE_RE_DELAY_4_HCLK NPCTL_ATR(3) /* ALE to RE delay = 4*HCLK */ +#define EXMC_ALE_RE_DELAY_5_HCLK NPCTL_ATR(4) /* ALE to RE delay = 5*HCLK */ +#define EXMC_ALE_RE_DELAY_6_HCLK NPCTL_ATR(5) /* ALE to RE delay = 6*HCLK */ +#define EXMC_ALE_RE_DELAY_7_HCLK NPCTL_ATR(6) /* ALE to RE delay = 7*HCLK */ +#define EXMC_ALE_RE_DELAY_8_HCLK NPCTL_ATR(7) /* ALE to RE delay = 8*HCLK */ +#define EXMC_ALE_RE_DELAY_9_HCLK NPCTL_ATR(8) /* ALE to RE delay = 9*HCLK */ +#define EXMC_ALE_RE_DELAY_10_HCLK NPCTL_ATR(9) /* ALE to RE delay = 10*HCLK */ +#define EXMC_ALE_RE_DELAY_11_HCLK NPCTL_ATR(10) /* ALE to RE delay = 11*HCLK */ +#define EXMC_ALE_RE_DELAY_12_HCLK NPCTL_ATR(11) /* ALE to RE delay = 12*HCLK */ +#define EXMC_ALE_RE_DELAY_13_HCLK NPCTL_ATR(12) /* ALE to RE delay = 13*HCLK */ +#define EXMC_ALE_RE_DELAY_14_HCLK NPCTL_ATR(13) /* ALE to RE delay = 14*HCLK */ +#define EXMC_ALE_RE_DELAY_15_HCLK NPCTL_ATR(14) /* ALE to RE delay = 15*HCLK */ +#define EXMC_ALE_RE_DELAY_16_HCLK NPCTL_ATR(15) /* ALE to RE delay = 16*HCLK */ + +/* CLE to RE delay */ +#define NPCTL_CTR(regval) (BITS(9,12) & ((uint32_t)(regval) << 9)) +#define EXMC_CLE_RE_DELAY_1_HCLK NPCTL_CTR(0) /* CLE to RE delay = 1*HCLK */ +#define EXMC_CLE_RE_DELAY_2_HCLK NPCTL_CTR(1) /* CLE to RE delay = 2*HCLK */ +#define EXMC_CLE_RE_DELAY_3_HCLK NPCTL_CTR(2) /* CLE to RE delay = 3*HCLK */ +#define EXMC_CLE_RE_DELAY_4_HCLK NPCTL_CTR(3) /* CLE to RE delay = 4*HCLK */ +#define EXMC_CLE_RE_DELAY_5_HCLK NPCTL_CTR(4) /* CLE to RE delay = 5*HCLK */ +#define EXMC_CLE_RE_DELAY_6_HCLK NPCTL_CTR(5) /* CLE to RE delay = 6*HCLK */ +#define EXMC_CLE_RE_DELAY_7_HCLK NPCTL_CTR(6) /* CLE to RE delay = 7*HCLK */ +#define EXMC_CLE_RE_DELAY_8_HCLK NPCTL_CTR(7) /* CLE to RE delay = 8*HCLK */ +#define EXMC_CLE_RE_DELAY_9_HCLK NPCTL_CTR(8) /* CLE to RE delay = 9*HCLK */ +#define EXMC_CLE_RE_DELAY_10_HCLK NPCTL_CTR(9) /* CLE to RE delay = 10*HCLK */ +#define EXMC_CLE_RE_DELAY_11_HCLK NPCTL_CTR(10) /* CLE to RE delay = 11*HCLK */ +#define EXMC_CLE_RE_DELAY_12_HCLK NPCTL_CTR(11) /* CLE to RE delay = 12*HCLK */ +#define EXMC_CLE_RE_DELAY_13_HCLK NPCTL_CTR(12) /* CLE to RE delay = 13*HCLK */ +#define EXMC_CLE_RE_DELAY_14_HCLK NPCTL_CTR(13) /* CLE to RE delay = 14*HCLK */ +#define EXMC_CLE_RE_DELAY_15_HCLK NPCTL_CTR(14) /* CLE to RE delay = 15*HCLK */ +#define EXMC_CLE_RE_DELAY_16_HCLK NPCTL_CTR(15) /* CLE to RE delay = 16*HCLK */ + +/* NAND bank memory data bus width */ +#define NPCTL_NDW(regval) (BITS(4,5) & ((uint32_t)(regval) << 4)) +#define EXMC_NAND_DATABUS_WIDTH_8B NPCTL_NDW(0) /*!< NAND data width 8 bits */ +#define EXMC_NAND_DATABUS_WIDTH_16B NPCTL_NDW(1) /*!< NAND data width 16 bits */ + +/* EXMC NOR/SRAM bank region definition */ +#define EXMC_BANK0_NORSRAM_REGION0 ((uint32_t)0x00000000U) /*!< bank0 NOR/SRAM region0 */ +#define EXMC_BANK0_NORSRAM_REGION1 ((uint32_t)0x00000001U) /*!< bank0 NOR/SRAM region1 */ +#define EXMC_BANK0_NORSRAM_REGION2 ((uint32_t)0x00000002U) /*!< bank0 NOR/SRAM region2 */ +#define EXMC_BANK0_NORSRAM_REGION3 ((uint32_t)0x00000003U) /*!< bank0 NOR/SRAM region3 */ + +/* EXMC NOR/SRAM write mode */ +#define EXMC_ASYN_WRITE ((uint32_t)0x00000000U) /*!< asynchronous write mode */ +#define EXMC_SYN_WRITE ((uint32_t)0x00080000U) /*!< synchronous write mode */ + +/* EXMC NWAIT signal configuration */ +#define EXMC_NWAIT_CONFIG_BEFORE ((uint32_t)0x00000000U) /*!< NWAIT signal is active one data cycle before wait state */ +#define EXMC_NWAIT_CONFIG_DURING ((uint32_t)0x00000800U) /*!< NWAIT signal is active during wait state */ + +/* EXMC NWAIT signal polarity configuration */ +#define EXMC_NWAIT_POLARITY_LOW ((uint32_t)0x00000000U) /*!< low level is active of NWAIT */ +#define EXMC_NWAIT_POLARITY_HIGH ((uint32_t)0x00000200U) /*!< high level is active of NWAIT */ + +/* EXMC NAND/PC card bank definition */ +#define EXMC_BANK1_NAND ((uint32_t)0x00000001U) /*!< bank1 NAND flash */ +#define EXMC_BANK2_NAND ((uint32_t)0x00000002U) /*!< bank2 NAND flash */ +#define EXMC_BANK3_PCCARD ((uint32_t)0x00000003U) /*!< bank3 PC card */ + +/* EXMC flag bits */ +#define EXMC_NAND_PCCARD_FLAG_RISE EXMC_NPINTEN_INTRS /*!< interrupt rising edge status */ +#define EXMC_NAND_PCCARD_FLAG_LEVEL EXMC_NPINTEN_INTHS /*!< interrupt high-level status */ +#define EXMC_NAND_PCCARD_FLAG_FALL EXMC_NPINTEN_INTFS /*!< interrupt falling edge status */ +#define EXMC_NAND_PCCARD_FLAG_FIFOE EXMC_NPINTEN_FFEPT /*!< FIFO empty flag */ + +/* EXMC interrupt flag bits */ +#define EXMC_NAND_PCCARD_INT_RISE EXMC_NPINTEN_INTREN /*!< interrupt rising edge detection enable */ +#define EXMC_NAND_PCCARD_INT_LEVEL EXMC_NPINTEN_INTHEN /*!< interrupt high-level detection enable */ +#define EXMC_NAND_PCCARD_INT_FALL EXMC_NPINTEN_INTFEN /*!< interrupt falling edge detection enable */ + +/* function declarations */ +/* deinitialize EXMC NOR/SRAM region */ +void exmc_norsram_deinit(uint32_t norsram_region); +/* exmc_norsram_parameter_struct parameter initialize */ +void exmc_norsram_struct_para_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct); +/* initialize EXMC NOR/SRAM region */ +void exmc_norsram_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct); +/* EXMC NOR/SRAM bank enable */ +void exmc_norsram_enable(uint32_t norsram_region); +/* EXMC NOR/SRAM bank disable */ +void exmc_norsram_disable(uint32_t norsram_region); + +/* deinitialize EXMC NAND bank */ +void exmc_nand_deinit(uint32_t nand_bank); +/* initialize EXMC NAND bank */ +void exmc_nand_init(exmc_nand_parameter_struct* exmc_nand_init_struct); +/* exmc_nand_init_struct parameter initialize */ +void exmc_nand_struct_para_init(exmc_nand_parameter_struct* exmc_nand_init_struct); +/* EXMC NAND bank enable */ +void exmc_nand_enable(uint32_t nand_bank); +/* EXMC NAND bank disable */ +void exmc_nand_disable(uint32_t nand_bank); +/* enable or disable the EXMC NAND ECC function */ +void exmc_nand_ecc_config(uint32_t nand_bank, ControlStatus newvalue); +/* get the EXMC ECC value */ +uint32_t exmc_ecc_get(uint32_t nand_bank); + +/* deinitialize EXMC PC card bank */ +void exmc_pccard_deinit(void); +/* initialize EXMC PC card bank */ +void exmc_pccard_init(exmc_pccard_parameter_struct* exmc_pccard_init_struct); +/* exmc_pccard_parameter_struct parameter initialize */ +void exmc_pccard_struct_para_init(exmc_pccard_parameter_struct* exmc_pccard_init_struct); +/* EXMC PC card bank enable */ +void exmc_pccard_enable(void); +/* EXMC PC card bank disable */ +void exmc_pccard_disable(void); + +/* enable EXMC interrupt */ +void exmc_interrupt_enable(uint32_t bank, uint32_t interrupt_source); +/* disable EXMC interrupt */ +void exmc_interrupt_disable(uint32_t bank, uint32_t interrupt_source); +/* check EXMC flag is set or not */ +FlagStatus exmc_flag_get(uint32_t bank, uint32_t flag); +/* clear EXMC flag */ +void exmc_flag_clear(uint32_t bank, uint32_t flag); +/* check EXMC flag is set or not */ +FlagStatus exmc_interrupt_flag_get(uint32_t bank, uint32_t interrupt_source); +/* clear EXMC flag */ +void exmc_interrupt_flag_clear(uint32_t bank, uint32_t interrupt_source); + +#endif /* GD32F10X_EXMC_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_exti.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_exti.h new file mode 100644 index 0000000000000000000000000000000000000000..98226719760f2217e557223c3231d87c80720a32 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_exti.h @@ -0,0 +1,258 @@ +/*! + \file gd32f10x_exti.h + \brief definitions for the EXTI + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_EXTI_H +#define GD32F10X_EXTI_H + +#include "gd32f10x.h" + +/* EXTI definitions */ +#define EXTI EXTI_BASE + +/* registers definitions */ +#define EXTI_INTEN REG32(EXTI + 0x00U) /*!< interrupt enable register */ +#define EXTI_EVEN REG32(EXTI + 0x04U) /*!< event enable register */ +#define EXTI_RTEN REG32(EXTI + 0x08U) /*!< rising edge trigger enable register */ +#define EXTI_FTEN REG32(EXTI + 0x0CU) /*!< falling trigger enable register */ +#define EXTI_SWIEV REG32(EXTI + 0x10U) /*!< software interrupt event register */ +#define EXTI_PD REG32(EXTI + 0x14U) /*!< pending register */ + +/* bits definitions */ +/* EXTI_INTEN */ +#define EXTI_INTEN_INTEN0 BIT(0) /*!< interrupt from line 0 */ +#define EXTI_INTEN_INTEN1 BIT(1) /*!< interrupt from line 1 */ +#define EXTI_INTEN_INTEN2 BIT(2) /*!< interrupt from line 2 */ +#define EXTI_INTEN_INTEN3 BIT(3) /*!< interrupt from line 3 */ +#define EXTI_INTEN_INTEN4 BIT(4) /*!< interrupt from line 4 */ +#define EXTI_INTEN_INTEN5 BIT(5) /*!< interrupt from line 5 */ +#define EXTI_INTEN_INTEN6 BIT(6) /*!< interrupt from line 6 */ +#define EXTI_INTEN_INTEN7 BIT(7) /*!< interrupt from line 7 */ +#define EXTI_INTEN_INTEN8 BIT(8) /*!< interrupt from line 8 */ +#define EXTI_INTEN_INTEN9 BIT(9) /*!< interrupt from line 9 */ +#define EXTI_INTEN_INTEN10 BIT(10) /*!< interrupt from line 10 */ +#define EXTI_INTEN_INTEN11 BIT(11) /*!< interrupt from line 11 */ +#define EXTI_INTEN_INTEN12 BIT(12) /*!< interrupt from line 12 */ +#define EXTI_INTEN_INTEN13 BIT(13) /*!< interrupt from line 13 */ +#define EXTI_INTEN_INTEN14 BIT(14) /*!< interrupt from line 14 */ +#define EXTI_INTEN_INTEN15 BIT(15) /*!< interrupt from line 15 */ +#define EXTI_INTEN_INTEN16 BIT(16) /*!< interrupt from line 16 */ +#define EXTI_INTEN_INTEN17 BIT(17) /*!< interrupt from line 17 */ +#define EXTI_INTEN_INTEN18 BIT(18) /*!< interrupt from line 18 */ +#define EXTI_INTEN_INTEN19 BIT(19) /*!< interrupt from line 19 */ + +/* EXTI_EVEN */ +#define EXTI_EVEN_EVEN0 BIT(0) /*!< event from line 0 */ +#define EXTI_EVEN_EVEN1 BIT(1) /*!< event from line 1 */ +#define EXTI_EVEN_EVEN2 BIT(2) /*!< event from line 2 */ +#define EXTI_EVEN_EVEN3 BIT(3) /*!< event from line 3 */ +#define EXTI_EVEN_EVEN4 BIT(4) /*!< event from line 4 */ +#define EXTI_EVEN_EVEN5 BIT(5) /*!< event from line 5 */ +#define EXTI_EVEN_EVEN6 BIT(6) /*!< event from line 6 */ +#define EXTI_EVEN_EVEN7 BIT(7) /*!< event from line 7 */ +#define EXTI_EVEN_EVEN8 BIT(8) /*!< event from line 8 */ +#define EXTI_EVEN_EVEN9 BIT(9) /*!< event from line 9 */ +#define EXTI_EVEN_EVEN10 BIT(10) /*!< event from line 10 */ +#define EXTI_EVEN_EVEN11 BIT(11) /*!< event from line 11 */ +#define EXTI_EVEN_EVEN12 BIT(12) /*!< event from line 12 */ +#define EXTI_EVEN_EVEN13 BIT(13) /*!< event from line 13 */ +#define EXTI_EVEN_EVEN14 BIT(14) /*!< event from line 14 */ +#define EXTI_EVEN_EVEN15 BIT(15) /*!< event from line 15 */ +#define EXTI_EVEN_EVEN16 BIT(16) /*!< event from line 16 */ +#define EXTI_EVEN_EVEN17 BIT(17) /*!< event from line 17 */ +#define EXTI_EVEN_EVEN18 BIT(18) /*!< event from line 18 */ +#define EXTI_EVEN_EVEN19 BIT(19) /*!< event from line 19 */ + +/* EXTI_RTEN */ +#define EXTI_RTEN_RTEN0 BIT(0) /*!< rising edge from line 0 */ +#define EXTI_RTEN_RTEN1 BIT(1) /*!< rising edge from line 1 */ +#define EXTI_RTEN_RTEN2 BIT(2) /*!< rising edge from line 2 */ +#define EXTI_RTEN_RTEN3 BIT(3) /*!< rising edge from line 3 */ +#define EXTI_RTEN_RTEN4 BIT(4) /*!< rising edge from line 4 */ +#define EXTI_RTEN_RTEN5 BIT(5) /*!< rising edge from line 5 */ +#define EXTI_RTEN_RTEN6 BIT(6) /*!< rising edge from line 6 */ +#define EXTI_RTEN_RTEN7 BIT(7) /*!< rising edge from line 7 */ +#define EXTI_RTEN_RTEN8 BIT(8) /*!< rising edge from line 8 */ +#define EXTI_RTEN_RTEN9 BIT(9) /*!< rising edge from line 9 */ +#define EXTI_RTEN_RTEN10 BIT(10) /*!< rising edge from line 10 */ +#define EXTI_RTEN_RTEN11 BIT(11) /*!< rising edge from line 11 */ +#define EXTI_RTEN_RTEN12 BIT(12) /*!< rising edge from line 12 */ +#define EXTI_RTEN_RTEN13 BIT(13) /*!< rising edge from line 13 */ +#define EXTI_RTEN_RTEN14 BIT(14) /*!< rising edge from line 14 */ +#define EXTI_RTEN_RTEN15 BIT(15) /*!< rising edge from line 15 */ +#define EXTI_RTEN_RTEN16 BIT(16) /*!< rising edge from line 16 */ +#define EXTI_RTEN_RTEN17 BIT(17) /*!< rising edge from line 17 */ +#define EXTI_RTEN_RTEN18 BIT(18) /*!< rising edge from line 18 */ +#define EXTI_RTEN_RTEN19 BIT(19) /*!< rising edge from line 19 */ + +/* EXTI_FTEN */ +#define EXTI_FTEN_FTEN0 BIT(0) /*!< falling edge from line 0 */ +#define EXTI_FTEN_FTEN1 BIT(1) /*!< falling edge from line 1 */ +#define EXTI_FTEN_FTEN2 BIT(2) /*!< falling edge from line 2 */ +#define EXTI_FTEN_FTEN3 BIT(3) /*!< falling edge from line 3 */ +#define EXTI_FTEN_FTEN4 BIT(4) /*!< falling edge from line 4 */ +#define EXTI_FTEN_FTEN5 BIT(5) /*!< falling edge from line 5 */ +#define EXTI_FTEN_FTEN6 BIT(6) /*!< falling edge from line 6 */ +#define EXTI_FTEN_FTEN7 BIT(7) /*!< falling edge from line 7 */ +#define EXTI_FTEN_FTEN8 BIT(8) /*!< falling edge from line 8 */ +#define EXTI_FTEN_FTEN9 BIT(9) /*!< falling edge from line 9 */ +#define EXTI_FTEN_FTEN10 BIT(10) /*!< falling edge from line 10 */ +#define EXTI_FTEN_FTEN11 BIT(11) /*!< falling edge from line 11 */ +#define EXTI_FTEN_FTEN12 BIT(12) /*!< falling edge from line 12 */ +#define EXTI_FTEN_FTEN13 BIT(13) /*!< falling edge from line 13 */ +#define EXTI_FTEN_FTEN14 BIT(14) /*!< falling edge from line 14 */ +#define EXTI_FTEN_FTEN15 BIT(15) /*!< falling edge from line 15 */ +#define EXTI_FTEN_FTEN16 BIT(16) /*!< falling edge from line 16 */ +#define EXTI_FTEN_FTEN17 BIT(17) /*!< falling edge from line 17 */ +#define EXTI_FTEN_FTEN18 BIT(18) /*!< falling edge from line 18 */ +#define EXTI_FTEN_FTEN19 BIT(19) /*!< falling edge from line 19 */ + +/* EXTI_SWIEV */ +#define EXTI_SWIEV_SWIEV0 BIT(0) /*!< software interrupt/event request from line 0 */ +#define EXTI_SWIEV_SWIEV1 BIT(1) /*!< software interrupt/event request from line 1 */ +#define EXTI_SWIEV_SWIEV2 BIT(2) /*!< software interrupt/event request from line 2 */ +#define EXTI_SWIEV_SWIEV3 BIT(3) /*!< software interrupt/event request from line 3 */ +#define EXTI_SWIEV_SWIEV4 BIT(4) /*!< software interrupt/event request from line 4 */ +#define EXTI_SWIEV_SWIEV5 BIT(5) /*!< software interrupt/event request from line 5 */ +#define EXTI_SWIEV_SWIEV6 BIT(6) /*!< software interrupt/event request from line 6 */ +#define EXTI_SWIEV_SWIEV7 BIT(7) /*!< software interrupt/event request from line 7 */ +#define EXTI_SWIEV_SWIEV8 BIT(8) /*!< software interrupt/event request from line 8 */ +#define EXTI_SWIEV_SWIEV9 BIT(9) /*!< software interrupt/event request from line 9 */ +#define EXTI_SWIEV_SWIEV10 BIT(10) /*!< software interrupt/event request from line 10 */ +#define EXTI_SWIEV_SWIEV11 BIT(11) /*!< software interrupt/event request from line 11 */ +#define EXTI_SWIEV_SWIEV12 BIT(12) /*!< software interrupt/event request from line 12 */ +#define EXTI_SWIEV_SWIEV13 BIT(13) /*!< software interrupt/event request from line 13 */ +#define EXTI_SWIEV_SWIEV14 BIT(14) /*!< software interrupt/event request from line 14 */ +#define EXTI_SWIEV_SWIEV15 BIT(15) /*!< software interrupt/event request from line 15 */ +#define EXTI_SWIEV_SWIEV16 BIT(16) /*!< software interrupt/event request from line 16 */ +#define EXTI_SWIEV_SWIEV17 BIT(17) /*!< software interrupt/event request from line 17 */ +#define EXTI_SWIEV_SWIEV18 BIT(18) /*!< software interrupt/event request from line 18 */ +#define EXTI_SWIEV_SWIEV19 BIT(19) /*!< software interrupt/event request from line 19 */ + +/* EXTI_PD */ +#define EXTI_PD_PD0 BIT(0) /*!< interrupt/event pending status from line 0 */ +#define EXTI_PD_PD1 BIT(1) /*!< interrupt/event pending status from line 1 */ +#define EXTI_PD_PD2 BIT(2) /*!< interrupt/event pending status from line 2 */ +#define EXTI_PD_PD3 BIT(3) /*!< interrupt/event pending status from line 3 */ +#define EXTI_PD_PD4 BIT(4) /*!< interrupt/event pending status from line 4 */ +#define EXTI_PD_PD5 BIT(5) /*!< interrupt/event pending status from line 5 */ +#define EXTI_PD_PD6 BIT(6) /*!< interrupt/event pending status from line 6 */ +#define EXTI_PD_PD7 BIT(7) /*!< interrupt/event pending status from line 7 */ +#define EXTI_PD_PD8 BIT(8) /*!< interrupt/event pending status from line 8 */ +#define EXTI_PD_PD9 BIT(9) /*!< interrupt/event pending status from line 9 */ +#define EXTI_PD_PD10 BIT(10) /*!< interrupt/event pending status from line 10 */ +#define EXTI_PD_PD11 BIT(11) /*!< interrupt/event pending status from line 11 */ +#define EXTI_PD_PD12 BIT(12) /*!< interrupt/event pending status from line 12 */ +#define EXTI_PD_PD13 BIT(13) /*!< interrupt/event pending status from line 13 */ +#define EXTI_PD_PD14 BIT(14) /*!< interrupt/event pending status from line 14 */ +#define EXTI_PD_PD15 BIT(15) /*!< interrupt/event pending status from line 15 */ +#define EXTI_PD_PD16 BIT(16) /*!< interrupt/event pending status from line 16 */ +#define EXTI_PD_PD17 BIT(17) /*!< interrupt/event pending status from line 17 */ +#define EXTI_PD_PD18 BIT(18) /*!< interrupt/event pending status from line 18 */ +#define EXTI_PD_PD19 BIT(19) /*!< interrupt/event pending status from line 19 */ + +/* constants definitions */ +/* EXTI line number */ +typedef enum +{ + EXTI_0 = BIT(0), /*!< EXTI line 0 */ + EXTI_1 = BIT(1), /*!< EXTI line 1 */ + EXTI_2 = BIT(2), /*!< EXTI line 2 */ + EXTI_3 = BIT(3), /*!< EXTI line 3 */ + EXTI_4 = BIT(4), /*!< EXTI line 4 */ + EXTI_5 = BIT(5), /*!< EXTI line 5 */ + EXTI_6 = BIT(6), /*!< EXTI line 6 */ + EXTI_7 = BIT(7), /*!< EXTI line 7 */ + EXTI_8 = BIT(8), /*!< EXTI line 8 */ + EXTI_9 = BIT(9), /*!< EXTI line 9 */ + EXTI_10 = BIT(10), /*!< EXTI line 10 */ + EXTI_11 = BIT(11), /*!< EXTI line 11 */ + EXTI_12 = BIT(12), /*!< EXTI line 12 */ + EXTI_13 = BIT(13), /*!< EXTI line 13 */ + EXTI_14 = BIT(14), /*!< EXTI line 14 */ + EXTI_15 = BIT(15), /*!< EXTI line 15 */ + EXTI_16 = BIT(16), /*!< EXTI line 16 */ + EXTI_17 = BIT(17), /*!< EXTI line 17 */ + EXTI_18 = BIT(18), /*!< EXTI line 18 */ + EXTI_19 = BIT(19), /*!< EXTI line 19 */ +}exti_line_enum; + +/* external interrupt and event */ +typedef enum +{ + EXTI_INTERRUPT = 0, /*!< EXTI interrupt mode */ + EXTI_EVENT /*!< EXTI event mode */ +}exti_mode_enum; + +/* interrupt trigger mode */ +typedef enum +{ + EXTI_TRIG_RISING = 0, /*!< EXTI rising edge trigger */ + EXTI_TRIG_FALLING, /*!< EXTI falling edge trigger */ + EXTI_TRIG_BOTH /*!< EXTI rising edge and falling edge trigger */ +}exti_trig_type_enum; + +/* function declarations */ +/* initialization, EXTI lines configuration functions */ +/* deinitialize the EXTI */ +void exti_deinit(void); +/* enable the configuration of EXTI initialize */ +void exti_init(exti_line_enum linex, exti_mode_enum mode, exti_trig_type_enum trig_type); +/* enable the interrupts from EXTI line x */ +void exti_interrupt_enable(exti_line_enum linex); +/* enable the events from EXTI line x */ +void exti_event_enable(exti_line_enum linex); +/* disable the interrupts from EXTI line x */ +void exti_interrupt_disable(exti_line_enum linex); +/* disable the events from EXTI line x */ +void exti_event_disable(exti_line_enum linex); + +/* interrupt & flag functions */ +/* get EXTI lines pending flag */ +FlagStatus exti_flag_get(exti_line_enum linex); +/* clear EXTI lines pending flag */ +void exti_flag_clear(exti_line_enum linex); +/* get EXTI lines flag when the interrupt flag is set */ +FlagStatus exti_interrupt_flag_get(exti_line_enum linex); +/* clear EXTI lines pending flag */ +void exti_interrupt_flag_clear(exti_line_enum linex); +/* enable the EXTI software interrupt event */ +void exti_software_interrupt_enable(exti_line_enum linex); +/* disable the EXTI software interrupt event */ +void exti_software_interrupt_disable(exti_line_enum linex); + +#endif /* GD32F10X_EXTI_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_fmc.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_fmc.h new file mode 100644 index 0000000000000000000000000000000000000000..f5969b64363b325e54af78a3d96d796a9d32f096 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_fmc.h @@ -0,0 +1,370 @@ +/*! + \file gd32f10x_fmc.h + \brief definitions for the FMC + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_FMC_H +#define GD32F10X_FMC_H + +#include "gd32f10x.h" + +/* FMC and option byte definition */ +#define FMC FMC_BASE /*!< FMC register base address */ +#define OB OB_BASE /*!< option bytes base address */ + +/* registers definitions */ +#define FMC_WS REG32((FMC) + 0x00U) /*!< FMC wait state register */ +#define FMC_KEY0 REG32((FMC) + 0x04U) /*!< FMC unlock key register 0 */ +#define FMC_OBKEY REG32((FMC) + 0x08U) /*!< FMC option bytes unlock key register */ +#define FMC_STAT0 REG32((FMC) + 0x0CU) /*!< FMC status register 0 */ +#define FMC_CTL0 REG32((FMC) + 0x10U) /*!< FMC control register 0 */ +#define FMC_ADDR0 REG32((FMC) + 0x14U) /*!< FMC address register 0 */ +#define FMC_OBSTAT REG32((FMC) + 0x1CU) /*!< FMC option bytes status register */ +#define FMC_WP REG32((FMC) + 0x20U) /*!< FMC erase/program protection register */ +#define FMC_KEY1 REG32((FMC) + 0x44U) /*!< FMC unlock key register 1 */ +#define FMC_STAT1 REG32((FMC) + 0x4CU) /*!< FMC status register 1 */ +#define FMC_CTL1 REG32((FMC) + 0x50U) /*!< FMC control register 1 */ +#define FMC_ADDR1 REG32((FMC) + 0x54U) /*!< FMC address register 1 */ +#define FMC_WSEN REG32((FMC) + 0xFCU) /*!< FMC wait state enable register */ +#define FMC_PID REG32((FMC) + 0x100U) /*!< FMC product ID register */ + +#define OB_SPC REG16((OB) + 0x00U) /*!< option byte security protection value */ +#define OB_USER REG16((OB) + 0x02U) /*!< option byte user value*/ +#define OB_WP0 REG16((OB) + 0x08U) /*!< option byte write protection 0 */ +#define OB_WP1 REG16((OB) + 0x0AU) /*!< option byte write protection 1 */ +#define OB_WP2 REG16((OB) + 0x0CU) /*!< option byte write protection 2 */ +#define OB_WP3 REG16((OB) + 0x0EU) /*!< option byte write protection 3 */ + +/* bits definitions */ +/* FMC_WS */ +#define FMC_WS_WSCNT BITS(0,2) /*!< wait state counter */ + +/* FMC_KEY0 */ +#define FMC_KEY0_KEY BITS(0,31) /*!< FMC_CTL0 unlock key bits */ + +/* FMC_OBKEY */ +#define FMC_OBKEY_OBKEY BITS(0,31) /*!< option bytes unlock key bits */ + +/* FMC_STAT0 */ +#define FMC_STAT0_BUSY BIT(0) /*!< flash busy flag bit */ +#define FMC_STAT0_PGERR BIT(2) /*!< flash program error flag bit */ +#define FMC_STAT0_WPERR BIT(4) /*!< erase/program protection error flag bit */ +#define FMC_STAT0_ENDF BIT(5) /*!< end of operation flag bit */ + +/* FMC_CTL0 */ +#define FMC_CTL0_PG BIT(0) /*!< main flash program for bank0 command bit */ +#define FMC_CTL0_PER BIT(1) /*!< main flash page erase for bank0 command bit */ +#define FMC_CTL0_MER BIT(2) /*!< main flash mass erase for bank0 command bit */ +#define FMC_CTL0_OBPG BIT(4) /*!< option bytes program command bit */ +#define FMC_CTL0_OBER BIT(5) /*!< option bytes erase command bit */ +#define FMC_CTL0_START BIT(6) /*!< send erase command to FMC bit */ +#define FMC_CTL0_LK BIT(7) /*!< FMC_CTL0 lock bit */ +#define FMC_CTL0_OBWEN BIT(9) /*!< option bytes erase/program enable bit */ +#define FMC_CTL0_ERRIE BIT(10) /*!< error interrupt enable bit */ +#define FMC_CTL0_ENDIE BIT(12) /*!< end of operation interrupt enable bit */ + +/* FMC_ADDR0 */ +#define FMC_ADDR0_ADDR BITS(0,31) /*!< flash erase/program command address bits */ + +/* FMC_OBSTAT */ +#define FMC_OBSTAT_OBERR BIT(0) /*!< option bytes read error bit. */ +#define FMC_OBSTAT_SPC BIT(1) /*!< option bytes security protection code */ +#define FMC_OBSTAT_USER BITS(2,9) /*!< store USER of option bytes block after system reset */ +#define FMC_OBSTAT_DATA BITS(10,25) /*!< store DATA of option bytes block after system reset. */ + +/* FMC_WP */ +#define FMC_WP_WP BITS(0,31) /*!< store WP of option bytes block after system reset */ + +/* FMC_KEY1 */ +#define FMC_KEY1_KEY BITS(0,31) /*!< FMC_CTL1 unlock key bits */ + +/* FMC_STAT1 */ +#define FMC_STAT1_BUSY BIT(0) /*!< flash busy flag bit */ +#define FMC_STAT1_PGERR BIT(2) /*!< flash program error flag bit */ +#define FMC_STAT1_WPERR BIT(4) /*!< erase/program protection error flag bit */ +#define FMC_STAT1_ENDF BIT(5) /*!< end of operation flag bit */ + +/* FMC_CTL1 */ +#define FMC_CTL1_PG BIT(0) /*!< main flash program for bank1 command bit */ +#define FMC_CTL1_PER BIT(1) /*!< main flash page erase for bank1 command bit */ +#define FMC_CTL1_MER BIT(2) /*!< main flash mass erase for bank1 command bit */ +#define FMC_CTL1_START BIT(6) /*!< send erase command to FMC bit */ +#define FMC_CTL1_LK BIT(7) /*!< FMC_CTL1 lock bit */ +#define FMC_CTL1_ERRIE BIT(10) /*!< error interrupt enable bit */ +#define FMC_CTL1_ENDIE BIT(12) /*!< end of operation interrupt enable bit */ + +/* FMC_ADDR1 */ +#define FMC_ADDR1_ADDR BITS(0,31) /*!< flash erase/program command address bits */ + +/* FMC_WSEN */ +#define FMC_WSEN_WSEN BIT(0) /*!< FMC wait state enable bit */ + +/* FMC_PID */ +#define FMC_PID_PID BITS(0,31) /*!< product ID bits */ + +/* constants definitions */ +/* define the FMC bit position and its register index offset */ +#define FMC_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)) +#define FMC_REG_VAL(offset) (REG32(FMC + ((uint32_t)(offset) >> 6))) +#define FMC_BIT_POS(val) ((uint32_t)(val) & 0x1FU) +#define FMC_REGIDX_BITS(regidx, bitpos0, bitpos1) (((uint32_t)(regidx) << 12) | ((uint32_t)(bitpos0) << 6) | (uint32_t)(bitpos1)) +#define FMC_REG_VALS(offset) (REG32(FMC + ((uint32_t)(offset) >> 12))) +#define FMC_BIT_POS0(val) (((uint32_t)(val) >> 6) & 0x1FU) +#define FMC_BIT_POS1(val) ((uint32_t)(val) & 0x1FU) +#define FMC_REG_OFFSET_GET(flag) ((uint32_t)(flag) >> 12) + +/* configuration register */ +#define FMC_STAT0_REG_OFFSET 0x0CU /*!< status register 0 offset */ +#define FMC_CTL0_REG_OFFSET 0x10U /*!< control register 0 offset */ +#define FMC_STAT1_REG_OFFSET 0x4CU /*!< status register 1 offset */ +#define FMC_CTL1_REG_OFFSET 0x50U /*!< control register 1 offset */ +#define FMC_OBSTAT_REG_OFFSET 0x1CU /*!< option byte status register offset */ + +/* fmc state */ +typedef enum +{ + FMC_READY, /*!< the operation has been completed */ + FMC_BUSY, /*!< the operation is in progress */ + FMC_PGERR, /*!< program error */ + FMC_WPERR, /*!< erase/program protection error */ + FMC_TOERR, /*!< timeout error */ +}fmc_state_enum; + +/* FMC interrupt enable */ +typedef enum +{ + FMC_INT_BANK0_END = FMC_REGIDX_BIT(FMC_CTL0_REG_OFFSET, 12U), /*!< enable FMC end of program interrupt */ + FMC_INT_BANK0_ERR = FMC_REGIDX_BIT(FMC_CTL0_REG_OFFSET, 10U), /*!< enable FMC error interrupt */ + FMC_INT_BANK1_END = FMC_REGIDX_BIT(FMC_CTL1_REG_OFFSET, 12U), /*!< enable FMC bank1 end of program interrupt */ + FMC_INT_BANK1_ERR = FMC_REGIDX_BIT(FMC_CTL1_REG_OFFSET, 10U), /*!< enable FMC bank1 error interrupt */ +}fmc_int_enum; + +/* FMC flags */ +typedef enum +{ + FMC_FLAG_BANK0_BUSY = FMC_REGIDX_BIT(FMC_STAT0_REG_OFFSET, 0U), /*!< FMC bank0 busy flag */ + FMC_FLAG_BANK0_PGERR = FMC_REGIDX_BIT(FMC_STAT0_REG_OFFSET, 2U), /*!< FMC bank0 operation error flag bit */ + FMC_FLAG_BANK0_WPERR = FMC_REGIDX_BIT(FMC_STAT0_REG_OFFSET, 4U), /*!< FMC bank0 erase/program protection error flag bit */ + FMC_FLAG_BANK0_END = FMC_REGIDX_BIT(FMC_STAT0_REG_OFFSET, 5U), /*!< FMC bank0 end of operation flag bit */ + FMC_FLAG_OBERR = FMC_REGIDX_BIT(FMC_OBSTAT_REG_OFFSET, 0U), /*!< FMC option bytes read error flag */ + FMC_FLAG_BANK1_BUSY = FMC_REGIDX_BIT(FMC_STAT1_REG_OFFSET, 0U), /*!< FMC bank1 busy flag */ + FMC_FLAG_BANK1_PGERR = FMC_REGIDX_BIT(FMC_STAT1_REG_OFFSET, 2U), /*!< FMC bank1 operation error flag bit */ + FMC_FLAG_BANK1_WPERR = FMC_REGIDX_BIT(FMC_STAT1_REG_OFFSET, 4U), /*!< FMC bank1 erase/program protection error flag bit */ + FMC_FLAG_BANK1_END = FMC_REGIDX_BIT(FMC_STAT1_REG_OFFSET, 5U), /*!< FMC bank1 end of operation flag bit */ +}fmc_flag_enum; + +/* FMC interrupt flags */ +typedef enum +{ + FMC_INT_FLAG_BANK0_PGERR = FMC_REGIDX_BITS(FMC_STAT0_REG_OFFSET, 2U, 10U), /*!< FMC bank0 operation error interrupt flag bit */ + FMC_INT_FLAG_BANK0_WPERR = FMC_REGIDX_BITS(FMC_STAT0_REG_OFFSET, 4U, 10U), /*!< FMC bank0 erase/program protection error interrupt flag bit */ + FMC_INT_FLAG_BANK0_END = FMC_REGIDX_BITS(FMC_STAT0_REG_OFFSET, 5U, 12U), /*!< FMC bank0 end of operation interrupt flag bit */ + FMC_INT_FLAG_BANK1_PGERR = FMC_REGIDX_BITS(FMC_STAT1_REG_OFFSET, 2U, 10U), /*!< FMC bank1 operation error interrupt flag bit */ + FMC_INT_FLAG_BANK1_WPERR = FMC_REGIDX_BITS(FMC_STAT1_REG_OFFSET, 4U, 10U), /*!< FMC bank1 erase/program protection error interrupt flag bit */ + FMC_INT_FLAG_BANK1_END = FMC_REGIDX_BITS(FMC_STAT1_REG_OFFSET, 5U, 12U), /*!< FMC bank1 end of operation interrupt flag bit */ +}fmc_interrupt_flag_enum; + +/* unlock key */ +#define UNLOCK_KEY0 ((uint32_t)0x45670123U) /*!< unlock key 0 */ +#define UNLOCK_KEY1 ((uint32_t)0xCDEF89ABU) /*!< unlock key 1 */ + +/* FMC wait state counter */ +#define WS_WSCNT(regval) (BITS(0,2) & ((uint32_t)(regval))) +#define WS_WSCNT_0 WS_WSCNT(0) /*!< FMC 0 wait */ +#define WS_WSCNT_1 WS_WSCNT(1) /*!< FMC 1 wait */ +#define WS_WSCNT_2 WS_WSCNT(2) /*!< FMC 2 wait */ + +/* option bytes software/hardware free watch dog timer */ +#define OB_FWDGT_SW ((uint8_t)0x01U) /*!< software free watchdog */ +#define OB_FWDGT_HW ((uint8_t)0x00U) /*!< hardware free watchdog */ + +/* option bytes reset or not entering deep sleep mode */ +#define OB_DEEPSLEEP_NRST ((uint8_t)0x02U) /*!< no reset when entering deepsleep mode */ +#define OB_DEEPSLEEP_RST ((uint8_t)0x00U) /*!< generate a reset instead of entering deepsleep mode */ + +/* option bytes reset or not entering standby mode */ +#define OB_STDBY_NRST ((uint8_t)0x04U) /*!< no reset when entering deepsleep mode */ +#define OB_STDBY_RST ((uint8_t)0x00U) /*!< generate a reset instead of entering standby mode */ + +/* option bytes boot bank value */ +#define OB_BOOT_B0 ((uint8_t)0x08U) /*!< boot from bank0 */ +#define OB_BOOT_B1 ((uint8_t)0x00U) /*!< boot from bank1 */ + +#define OB_USER_MASK ((uint8_t)0xF0U) /*!< MASK value */ + +/* read protect configure */ +#define FMC_NSPC ((uint8_t)0xA5U) /*!< no security protection */ +#define FMC_USPC ((uint8_t)0xBBU) /*!< under security protection */ + +/* OB_SPC */ +#define OB_SPC_SPC ((uint32_t)0x000000FFU) /*!< option byte security protection value */ +#define OB_SPC_SPC_N ((uint32_t)0x0000FF00U) /*!< option byte security protection complement value */ + +/* OB_USER */ +#define OB_USER_USER ((uint32_t)0x00FF0000U) /*!< user option value */ +#define OB_USER_USER_N ((uint32_t)0xFF000000U) /*!< user option complement value */ + +/* OB_WP0 */ +#define OB_WP0_WP0 ((uint32_t)0x000000FFU) /*!< FMC write protection option value */ + +/* OB_WP1 */ +#define OB_WP1_WP1 ((uint32_t)0x0000FF00U) /*!< FMC write protection option complement value */ + +/* OB_WP2 */ +#define OB_WP2_WP2 ((uint32_t)0x00FF0000U) /*!< FMC write protection option value */ + +/* OB_WP3 */ +#define OB_WP3_WP3 ((uint32_t)0xFF000000U) /*!< FMC write protection option complement value */ + +/* option bytes write protection */ +#define OB_WP_0 ((uint32_t)0x00000001U) /*!< erase/program protection of sector 0 */ +#define OB_WP_1 ((uint32_t)0x00000002U) /*!< erase/program protection of sector 1 */ +#define OB_WP_2 ((uint32_t)0x00000004U) /*!< erase/program protection of sector 2 */ +#define OB_WP_3 ((uint32_t)0x00000008U) /*!< erase/program protection of sector 3 */ +#define OB_WP_4 ((uint32_t)0x00000010U) /*!< erase/program protection of sector 4 */ +#define OB_WP_5 ((uint32_t)0x00000020U) /*!< erase/program protection of sector 5 */ +#define OB_WP_6 ((uint32_t)0x00000040U) /*!< erase/program protection of sector 6 */ +#define OB_WP_7 ((uint32_t)0x00000080U) /*!< erase/program protection of sector 7 */ +#define OB_WP_8 ((uint32_t)0x00000100U) /*!< erase/program protection of sector 8 */ +#define OB_WP_9 ((uint32_t)0x00000200U) /*!< erase/program protection of sector 9 */ +#define OB_WP_10 ((uint32_t)0x00000400U) /*!< erase/program protection of sector 10 */ +#define OB_WP_11 ((uint32_t)0x00000800U) /*!< erase/program protection of sector 11 */ +#define OB_WP_12 ((uint32_t)0x00001000U) /*!< erase/program protection of sector 12 */ +#define OB_WP_13 ((uint32_t)0x00002000U) /*!< erase/program protection of sector 13 */ +#define OB_WP_14 ((uint32_t)0x00004000U) /*!< erase/program protection of sector 14 */ +#define OB_WP_15 ((uint32_t)0x00008000U) /*!< erase/program protection of sector 15 */ +#define OB_WP_16 ((uint32_t)0x00010000U) /*!< erase/program protection of sector 16 */ +#define OB_WP_17 ((uint32_t)0x00020000U) /*!< erase/program protection of sector 17 */ +#define OB_WP_18 ((uint32_t)0x00040000U) /*!< erase/program protection of sector 18 */ +#define OB_WP_19 ((uint32_t)0x00080000U) /*!< erase/program protection of sector 19 */ +#define OB_WP_20 ((uint32_t)0x00100000U) /*!< erase/program protection of sector 20 */ +#define OB_WP_21 ((uint32_t)0x00200000U) /*!< erase/program protection of sector 21 */ +#define OB_WP_22 ((uint32_t)0x00400000U) /*!< erase/program protection of sector 22 */ +#define OB_WP_23 ((uint32_t)0x00800000U) /*!< erase/program protection of sector 23 */ +#define OB_WP_24 ((uint32_t)0x01000000U) /*!< erase/program protection of sector 24 */ +#define OB_WP_25 ((uint32_t)0x02000000U) /*!< erase/program protection of sector 25 */ +#define OB_WP_26 ((uint32_t)0x04000000U) /*!< erase/program protection of sector 26 */ +#define OB_WP_27 ((uint32_t)0x08000000U) /*!< erase/program protection of sector 27 */ +#define OB_WP_28 ((uint32_t)0x10000000U) /*!< erase/program protection of sector 28 */ +#define OB_WP_29 ((uint32_t)0x20000000U) /*!< erase/program protection of sector 29 */ +#define OB_WP_30 ((uint32_t)0x40000000U) /*!< erase/program protection of sector 30 */ +#define OB_WP_31 ((uint32_t)0x80000000U) /*!< erase/program protection of sector 31 */ +#define OB_WP_ALL ((uint32_t)0xFFFFFFFFU) /*!< erase/program protection of all sectors */ + +/* FMC timeout */ +#define FMC_TIMEOUT_COUNT ((uint32_t)0x000F0000U) /*!< FMC timeout count value */ + +/* FMC BANK address */ +#define FMC_BANK0_END_ADDRESS ((uint32_t)0x0807FFFFU) /*!< FMC bank0 end address */ +#define FMC_BANK0_SIZE ((uint32_t)0x00000200U) /*!< FMC bank0 size */ +#define FMC_SIZE (*(uint16_t *)0x1FFFF7E0U) /*!< FMC size */ + +/* function declarations */ +/* FMC main memory programming functions */ +/* set the FMC wait state counter */ +void fmc_wscnt_set(uint32_t wscnt); +/* unlock the main FMC operation */ +void fmc_unlock(void); +/* unlock the FMC bank0 operation */ +void fmc_bank0_unlock(void); +/* unlock the FMC bank1 operation */ +void fmc_bank1_unlock(void); +/* lock the main FMC operation */ +void fmc_lock(void); +/* lock the bank0 FMC operation */ +void fmc_bank0_lock(void); +/* lock the bank1 FMC operation */ +void fmc_bank1_lock(void); +/* FMC erase page */ +fmc_state_enum fmc_page_erase(uint32_t page_address); +/* FMC erase whole chip */ +fmc_state_enum fmc_mass_erase(void); +/* FMC erase whole bank0 */ +fmc_state_enum fmc_bank0_erase(void); +/* FMC erase whole bank1 */ +fmc_state_enum fmc_bank1_erase(void); +/* FMC program a word at the corresponding address */ +fmc_state_enum fmc_word_program(uint32_t address, uint32_t data); +/* FMC program a half word at the corresponding address */ +fmc_state_enum fmc_halfword_program(uint32_t address, uint16_t data); + +/* FMC option bytes programming functions */ +/* unlock the option byte operation */ +void ob_unlock(void); +/* lock the option byte operation */ +void ob_lock(void); +/* erase the option byte */ +fmc_state_enum ob_erase(void); +/* enable write protect */ +fmc_state_enum ob_write_protection_enable(uint32_t ob_wp); +/* configure the option byte security protection */ +fmc_state_enum ob_security_protection_config(uint8_t ob_spc); +/* write the FMC option byte */ +fmc_state_enum ob_user_write(uint8_t ob_fwdgt, uint8_t ob_deepsleep, uint8_t ob_stdby, uint8_t ob_boot); +/* program option bytes data */ +fmc_state_enum ob_data_program(uint32_t address, uint8_t data); +/* get the FMC option byte user */ +uint8_t ob_user_get(void); +/* get OB_DATA in register FMC_OBSTAT */ +uint16_t ob_data_get(void); +/* get the FMC option byte write protection */ +uint32_t ob_write_protection_get(void); +/* get option byte security protection code value */ +FlagStatus ob_spc_get(void); + +/* FMC interrupts and flags management functions */ +/* enable FMC interrupt */ +void fmc_interrupt_enable(uint32_t interrupt); +/* disable FMC interrupt */ +void fmc_interrupt_disable(uint32_t interrupt); +/* check flag is set or not */ +FlagStatus fmc_flag_get(uint32_t flag); +/* clear the FMC flag */ +void fmc_flag_clear(uint32_t flag); +/* get FMC interrupt flag state */ +FlagStatus fmc_interrupt_flag_get(fmc_interrupt_flag_enum flag); +/* clear FMC interrupt flag state */ +void fmc_interrupt_flag_clear(fmc_interrupt_flag_enum flag); +/* return the FMC bank0 state */ +fmc_state_enum fmc_bank0_state_get(void); +/* return the FMC bank1 state */ +fmc_state_enum fmc_bank1_state_get(void); +/* check FMC bank0 ready or not */ +fmc_state_enum fmc_bank0_ready_wait(uint32_t timeout); +/* check FMC bank1 ready or not */ +fmc_state_enum fmc_bank1_ready_wait(uint32_t timeout); + +#endif /* GD32F10X_FMC_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_fwdgt.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_fwdgt.h new file mode 100644 index 0000000000000000000000000000000000000000..2d22177e1e2d1a7a672a9f448c4e72f1328d1c93 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_fwdgt.h @@ -0,0 +1,108 @@ +/*! + \file gd32f10x_fwdgt.h + \brief definitions for the FWDGT + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_FWDGT_H +#define GD32F10X_FWDGT_H + +#include "gd32f10x.h" + +/* FWDGT definitions */ +#define FWDGT FWDGT_BASE /*!< FWDGT base address */ + +/* registers definitions */ +#define FWDGT_CTL REG32((FWDGT) + 0x00U) /*!< FWDGT control register */ +#define FWDGT_PSC REG32((FWDGT) + 0x04U) /*!< FWDGT prescaler register */ +#define FWDGT_RLD REG32((FWDGT) + 0x08U) /*!< FWDGT reload register */ +#define FWDGT_STAT REG32((FWDGT) + 0x0CU) /*!< FWDGT status register */ + +/* bits definitions */ +/* FWDGT_CTL */ +#define FWDGT_CTL_CMD BITS(0,15) /*!< FWDGT command value */ + +/* FWDGT_PSC */ +#define FWDGT_PSC_PSC BITS(0,2) /*!< FWDGT prescaler divider value */ + +/* FWDGT_RLD */ +#define FWDGT_RLD_RLD BITS(0,11) /*!< FWDGT counter reload value */ + +/* FWDGT_STAT */ +#define FWDGT_STAT_PUD BIT(0) /*!< FWDGT prescaler divider value update */ +#define FWDGT_STAT_RUD BIT(1) /*!< FWDGT counter reload value update */ + +/* constants definitions */ +/* psc register value */ +#define PSC_PSC(regval) (BITS(0,2) & ((uint32_t)(regval) << 0)) +#define FWDGT_PSC_DIV4 ((uint8_t)PSC_PSC(0)) /*!< FWDGT prescaler set to 4 */ +#define FWDGT_PSC_DIV8 ((uint8_t)PSC_PSC(1)) /*!< FWDGT prescaler set to 8 */ +#define FWDGT_PSC_DIV16 ((uint8_t)PSC_PSC(2)) /*!< FWDGT prescaler set to 16 */ +#define FWDGT_PSC_DIV32 ((uint8_t)PSC_PSC(3)) /*!< FWDGT prescaler set to 32 */ +#define FWDGT_PSC_DIV64 ((uint8_t)PSC_PSC(4)) /*!< FWDGT prescaler set to 64 */ +#define FWDGT_PSC_DIV128 ((uint8_t)PSC_PSC(5)) /*!< FWDGT prescaler set to 128 */ +#define FWDGT_PSC_DIV256 ((uint8_t)PSC_PSC(6)) /*!< FWDGT prescaler set to 256 */ + +/* control value */ +#define FWDGT_WRITEACCESS_ENABLE ((uint16_t)0x5555U) /*!< FWDGT_CTL bits write access enable value */ +#define FWDGT_WRITEACCESS_DISABLE ((uint16_t)0x0000U) /*!< FWDGT_CTL bits write access disable value */ +#define FWDGT_KEY_RELOAD ((uint16_t)0xAAAAU) /*!< FWDGT_CTL bits fwdgt counter reload value */ +#define FWDGT_KEY_ENABLE ((uint16_t)0xCCCCU) /*!< FWDGT_CTL bits fwdgt counter enable value */ + +/* FWDGT timeout value */ +#define FWDGT_PSC_TIMEOUT ((uint32_t)0x000FFFFFU) /*!< FWDGT_PSC register write operation state flag timeout */ +#define FWDGT_RLD_TIMEOUT ((uint32_t)0x000FFFFFU) /*!< FWDGT_RLD register write operation state flag timeout */ + +/* FWDGT flag definitions */ +#define FWDGT_FLAG_PUD FWDGT_STAT_PUD /*!< FWDGT prescaler divider value update flag */ +#define FWDGT_FLAG_RUD FWDGT_STAT_RUD /*!< FWDGT counter reload value update flag */ + +/* function declarations */ +/* enable write access to FWDGT_PSC and FWDGT_RLD */ +void fwdgt_write_enable(void); +/* disable write access to FWDGT_PSC and FWDGT_RLD */ +void fwdgt_write_disable(void); +/* start the free watchdog timer counter */ +void fwdgt_enable(void); + +/* reload the counter of FWDGT */ +void fwdgt_counter_reload(void); +/* configure counter reload value, and prescaler divider value */ +ErrStatus fwdgt_config(uint16_t reload_value, uint8_t prescaler_div); + +/* get flag state of FWDGT */ +FlagStatus fwdgt_flag_get(uint16_t flag); + +#endif /* GD32F10X_FWDGT_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_gpio.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_gpio.h new file mode 100644 index 0000000000000000000000000000000000000000..3b6b53a36d3dc3e007ed8c2520db28a0202cde0b --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_gpio.h @@ -0,0 +1,497 @@ +/*! + \file gd32f10x_gpio.h + \brief definitions for the GPIO + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10x_GPIO_H +#define GD32F10x_GPIO_H + +#include "gd32f10x.h" + +/* GPIOx(x=A,B,C,D,E,F,G) definitions */ +#define GPIOA (GPIO_BASE + 0x00000000U) +#define GPIOB (GPIO_BASE + 0x00000400U) +#define GPIOC (GPIO_BASE + 0x00000800U) +#define GPIOD (GPIO_BASE + 0x00000C00U) +#define GPIOE (GPIO_BASE + 0x00001000U) +#define GPIOF (GPIO_BASE + 0x00001400U) +#define GPIOG (GPIO_BASE + 0x00001800U) + +/* AFIO definitions */ +#define AFIO AFIO_BASE + +/* registers definitions */ + +/* GPIO registers definitions */ +#define GPIO_CTL0(gpiox) REG32((gpiox) + 0x00U) /*!< GPIO port control register 0 */ +#define GPIO_CTL1(gpiox) REG32((gpiox) + 0x04U) /*!< GPIO port control register 1 */ +#define GPIO_ISTAT(gpiox) REG32((gpiox) + 0x08U) /*!< GPIO port input status register */ +#define GPIO_OCTL(gpiox) REG32((gpiox) + 0x0CU) /*!< GPIO port output control register */ +#define GPIO_BOP(gpiox) REG32((gpiox) + 0x10U) /*!< GPIO port bit operation register */ +#define GPIO_BC(gpiox) REG32((gpiox) + 0x14U) /*!< GPIO bit clear register */ +#define GPIO_LOCK(gpiox) REG32((gpiox) + 0x18U) /*!< GPIO port configuration lock register */ + +/* AFIO registers definitions */ +#define AFIO_EC REG32(AFIO + 0x00U) /*!< AFIO event control register */ +#define AFIO_PCF0 REG32(AFIO + 0x04U) /*!< AFIO port configuration register 0 */ +#define AFIO_EXTISS0 REG32(AFIO + 0x08U) /*!< AFIO port EXTI sources selection register 0 */ +#define AFIO_EXTISS1 REG32(AFIO + 0x0CU) /*!< AFIO port EXTI sources selection register 1 */ +#define AFIO_EXTISS2 REG32(AFIO + 0x10U) /*!< AFIO port EXTI sources selection register 2 */ +#define AFIO_EXTISS3 REG32(AFIO + 0x14U) /*!< AFIO port EXTI sources selection register 3 */ +#define AFIO_PCF1 REG32(AFIO + 0x1CU) /*!< AFIO port configuration register 1 */ + +/* bits definitions */ +/* GPIO_CTL0 */ +#define GPIO_CTL0_MD0 BITS(0,1) /*!< port 0 mode bits */ +#define GPIO_CTL0_CTL0 BITS(2,3) /*!< pin 0 configuration bits */ +#define GPIO_CTL0_MD1 BITS(4,5) /*!< port 1 mode bits */ +#define GPIO_CTL0_CTL1 BITS(6,7) /*!< pin 1 configuration bits */ +#define GPIO_CTL0_MD2 BITS(8,9) /*!< port 2 mode bits */ +#define GPIO_CTL0_CTL2 BITS(10,11) /*!< pin 2 configuration bits */ +#define GPIO_CTL0_MD3 BITS(12,13) /*!< port 3 mode bits */ +#define GPIO_CTL0_CTL3 BITS(14,15) /*!< pin 3 configuration bits */ +#define GPIO_CTL0_MD4 BITS(16,17) /*!< port 4 mode bits */ +#define GPIO_CTL0_CTL4 BITS(18,19) /*!< pin 4 configuration bits */ +#define GPIO_CTL0_MD5 BITS(20,21) /*!< port 5 mode bits */ +#define GPIO_CTL0_CTL5 BITS(22,23) /*!< pin 5 configuration bits */ +#define GPIO_CTL0_MD6 BITS(24,25) /*!< port 6 mode bits */ +#define GPIO_CTL0_CTL6 BITS(26,27) /*!< pin 6 configuration bits */ +#define GPIO_CTL0_MD7 BITS(28,29) /*!< port 7 mode bits */ +#define GPIO_CTL0_CTL7 BITS(30,31) /*!< pin 7 configuration bits */ + +/* GPIO_CTL1 */ +#define GPIO_CTL1_MD8 BITS(0,1) /*!< port 8 mode bits */ +#define GPIO_CTL1_CTL8 BITS(2,3) /*!< pin 8 configuration bits */ +#define GPIO_CTL1_MD9 BITS(4,5) /*!< port 9 mode bits */ +#define GPIO_CTL1_CTL9 BITS(6,7) /*!< pin 9 configuration bits */ +#define GPIO_CTL1_MD10 BITS(8,9) /*!< port 10 mode bits */ +#define GPIO_CTL1_CTL10 BITS(10,11) /*!< pin 10 configuration bits */ +#define GPIO_CTL1_MD11 BITS(12,13) /*!< port 11 mode bits */ +#define GPIO_CTL1_CTL11 BITS(14,15) /*!< pin 11 configuration bits */ +#define GPIO_CTL1_MD12 BITS(16,17) /*!< port 12 mode bits */ +#define GPIO_CTL1_CTL12 BITS(18,19) /*!< pin 12 configuration bits */ +#define GPIO_CTL1_MD13 BITS(20,21) /*!< port 13 mode bits */ +#define GPIO_CTL1_CTL13 BITS(22,23) /*!< pin 13 configuration bits */ +#define GPIO_CTL1_MD14 BITS(24,25) /*!< port 14 mode bits */ +#define GPIO_CTL1_CTL14 BITS(26,27) /*!< pin 14 configuration bits */ +#define GPIO_CTL1_MD15 BITS(28,29) /*!< port 15 mode bits */ +#define GPIO_CTL1_CTL15 BITS(30,31) /*!< pin 15 configuration bits */ + +/* GPIO_ISTAT */ +#define GPIO_ISTAT_ISTAT0 BIT(0) /*!< pin 0 input status */ +#define GPIO_ISTAT_ISTAT1 BIT(1) /*!< pin 1 input status */ +#define GPIO_ISTAT_ISTAT2 BIT(2) /*!< pin 2 input status */ +#define GPIO_ISTAT_ISTAT3 BIT(3) /*!< pin 3 input status */ +#define GPIO_ISTAT_ISTAT4 BIT(4) /*!< pin 4 input status */ +#define GPIO_ISTAT_ISTAT5 BIT(5) /*!< pin 5 input status */ +#define GPIO_ISTAT_ISTAT6 BIT(6) /*!< pin 6 input status */ +#define GPIO_ISTAT_ISTAT7 BIT(7) /*!< pin 7 input status */ +#define GPIO_ISTAT_ISTAT8 BIT(8) /*!< pin 8 input status */ +#define GPIO_ISTAT_ISTAT9 BIT(9) /*!< pin 9 input status */ +#define GPIO_ISTAT_ISTAT10 BIT(10) /*!< pin 10 input status */ +#define GPIO_ISTAT_ISTAT11 BIT(11) /*!< pin 11 input status */ +#define GPIO_ISTAT_ISTAT12 BIT(12) /*!< pin 12 input status */ +#define GPIO_ISTAT_ISTAT13 BIT(13) /*!< pin 13 input status */ +#define GPIO_ISTAT_ISTAT14 BIT(14) /*!< pin 14 input status */ +#define GPIO_ISTAT_ISTAT15 BIT(15) /*!< pin 15 input status */ + +/* GPIO_OCTL */ +#define GPIO_OCTL_OCTL0 BIT(0) /*!< pin 0 output bit */ +#define GPIO_OCTL_OCTL1 BIT(1) /*!< pin 1 output bit */ +#define GPIO_OCTL_OCTL2 BIT(2) /*!< pin 2 output bit */ +#define GPIO_OCTL_OCTL3 BIT(3) /*!< pin 3 output bit */ +#define GPIO_OCTL_OCTL4 BIT(4) /*!< pin 4 output bit */ +#define GPIO_OCTL_OCTL5 BIT(5) /*!< pin 5 output bit */ +#define GPIO_OCTL_OCTL6 BIT(6) /*!< pin 6 output bit */ +#define GPIO_OCTL_OCTL7 BIT(7) /*!< pin 7 output bit */ +#define GPIO_OCTL_OCTL8 BIT(8) /*!< pin 8 output bit */ +#define GPIO_OCTL_OCTL9 BIT(9) /*!< pin 9 output bit */ +#define GPIO_OCTL_OCTL10 BIT(10) /*!< pin 10 output bit */ +#define GPIO_OCTL_OCTL11 BIT(11) /*!< pin 11 output bit */ +#define GPIO_OCTL_OCTL12 BIT(12) /*!< pin 12 output bit */ +#define GPIO_OCTL_OCTL13 BIT(13) /*!< pin 13 output bit */ +#define GPIO_OCTL_OCTL14 BIT(14) /*!< pin 14 output bit */ +#define GPIO_OCTL_OCTL15 BIT(15) /*!< pin 15 output bit */ + +/* GPIO_BOP */ +#define GPIO_BOP_BOP0 BIT(0) /*!< pin 0 set bit */ +#define GPIO_BOP_BOP1 BIT(1) /*!< pin 1 set bit */ +#define GPIO_BOP_BOP2 BIT(2) /*!< pin 2 set bit */ +#define GPIO_BOP_BOP3 BIT(3) /*!< pin 3 set bit */ +#define GPIO_BOP_BOP4 BIT(4) /*!< pin 4 set bit */ +#define GPIO_BOP_BOP5 BIT(5) /*!< pin 5 set bit */ +#define GPIO_BOP_BOP6 BIT(6) /*!< pin 6 set bit */ +#define GPIO_BOP_BOP7 BIT(7) /*!< pin 7 set bit */ +#define GPIO_BOP_BOP8 BIT(8) /*!< pin 8 set bit */ +#define GPIO_BOP_BOP9 BIT(9) /*!< pin 9 set bit */ +#define GPIO_BOP_BOP10 BIT(10) /*!< pin 10 set bit */ +#define GPIO_BOP_BOP11 BIT(11) /*!< pin 11 set bit */ +#define GPIO_BOP_BOP12 BIT(12) /*!< pin 12 set bit */ +#define GPIO_BOP_BOP13 BIT(13) /*!< pin 13 set bit */ +#define GPIO_BOP_BOP14 BIT(14) /*!< pin 14 set bit */ +#define GPIO_BOP_BOP15 BIT(15) /*!< pin 15 set bit */ +#define GPIO_BOP_CR0 BIT(16) /*!< pin 0 clear bit */ +#define GPIO_BOP_CR1 BIT(17) /*!< pin 1 clear bit */ +#define GPIO_BOP_CR2 BIT(18) /*!< pin 2 clear bit */ +#define GPIO_BOP_CR3 BIT(19) /*!< pin 3 clear bit */ +#define GPIO_BOP_CR4 BIT(20) /*!< pin 4 clear bit */ +#define GPIO_BOP_CR5 BIT(21) /*!< pin 5 clear bit */ +#define GPIO_BOP_CR6 BIT(22) /*!< pin 6 clear bit */ +#define GPIO_BOP_CR7 BIT(23) /*!< pin 7 clear bit */ +#define GPIO_BOP_CR8 BIT(24) /*!< pin 8 clear bit */ +#define GPIO_BOP_CR9 BIT(25) /*!< pin 9 clear bit */ +#define GPIO_BOP_CR10 BIT(26) /*!< pin 10 clear bit */ +#define GPIO_BOP_CR11 BIT(27) /*!< pin 11 clear bit */ +#define GPIO_BOP_CR12 BIT(28) /*!< pin 12 clear bit */ +#define GPIO_BOP_CR13 BIT(29) /*!< pin 13 clear bit */ +#define GPIO_BOP_CR14 BIT(30) /*!< pin 14 clear bit */ +#define GPIO_BOP_CR15 BIT(31) /*!< pin 15 clear bit */ + +/* GPIO_BC */ +#define GPIO_BC_CR0 BIT(0) /*!< pin 0 clear bit */ +#define GPIO_BC_CR1 BIT(1) /*!< pin 1 clear bit */ +#define GPIO_BC_CR2 BIT(2) /*!< pin 2 clear bit */ +#define GPIO_BC_CR3 BIT(3) /*!< pin 3 clear bit */ +#define GPIO_BC_CR4 BIT(4) /*!< pin 4 clear bit */ +#define GPIO_BC_CR5 BIT(5) /*!< pin 5 clear bit */ +#define GPIO_BC_CR6 BIT(6) /*!< pin 6 clear bit */ +#define GPIO_BC_CR7 BIT(7) /*!< pin 7 clear bit */ +#define GPIO_BC_CR8 BIT(8) /*!< pin 8 clear bit */ +#define GPIO_BC_CR9 BIT(9) /*!< pin 9 clear bit */ +#define GPIO_BC_CR10 BIT(10) /*!< pin 10 clear bit */ +#define GPIO_BC_CR11 BIT(11) /*!< pin 11 clear bit */ +#define GPIO_BC_CR12 BIT(12) /*!< pin 12 clear bit */ +#define GPIO_BC_CR13 BIT(13) /*!< pin 13 clear bit */ +#define GPIO_BC_CR14 BIT(14) /*!< pin 14 clear bit */ +#define GPIO_BC_CR15 BIT(15) /*!< pin 15 clear bit */ + +/* GPIO_LOCK */ +#define GPIO_LOCK_LK0 BIT(0) /*!< pin 0 lock bit */ +#define GPIO_LOCK_LK1 BIT(1) /*!< pin 1 lock bit */ +#define GPIO_LOCK_LK2 BIT(2) /*!< pin 2 lock bit */ +#define GPIO_LOCK_LK3 BIT(3) /*!< pin 3 lock bit */ +#define GPIO_LOCK_LK4 BIT(4) /*!< pin 4 lock bit */ +#define GPIO_LOCK_LK5 BIT(5) /*!< pin 5 lock bit */ +#define GPIO_LOCK_LK6 BIT(6) /*!< pin 6 lock bit */ +#define GPIO_LOCK_LK7 BIT(7) /*!< pin 7 lock bit */ +#define GPIO_LOCK_LK8 BIT(8) /*!< pin 8 lock bit */ +#define GPIO_LOCK_LK9 BIT(9) /*!< pin 9 lock bit */ +#define GPIO_LOCK_LK10 BIT(10) /*!< pin 10 lock bit */ +#define GPIO_LOCK_LK11 BIT(11) /*!< pin 11 lock bit */ +#define GPIO_LOCK_LK12 BIT(12) /*!< pin 12 lock bit */ +#define GPIO_LOCK_LK13 BIT(13) /*!< pin 13 lock bit */ +#define GPIO_LOCK_LK14 BIT(14) /*!< pin 14 lock bit */ +#define GPIO_LOCK_LK15 BIT(15) /*!< pin 15 lock bit */ +#define GPIO_LOCK_LKK BIT(16) /*!< pin sequence lock key */ + +/* AFIO_EC */ +#define AFIO_EC_PIN BITS(0,3) /*!< event output pin selection */ +#define AFIO_EC_PORT BITS(4,6) /*!< event output port selection */ +#define AFIO_EC_EOE BIT(7) /*!< event output enable */ + +/* AFIO_PCF0 */ +#ifdef GD32F10X_CL +/* memory map and bit definitions for GD32F10X_CL devices */ +#define AFIO_PCF0_SPI0_REMAP BIT(0) /*!< SPI0 remapping */ +#define AFIO_PCF0_I2C0_REMAP BIT(1) /*!< I2C0 remapping */ +#define AFIO_PCF0_USART0_REMAP BIT(2) /*!< USART0 remapping */ +#define AFIO_PCF0_USART1_REMAP BIT(3) /*!< USART1 remapping */ +#define AFIO_PCF0_USART2_REMAP BITS(4,5) /*!< USART2 remapping */ +#define AFIO_PCF0_TIMER0_REMAP BITS(6,7) /*!< TIMER0 remapping */ +#define AFIO_PCF0_TIMER1_REMAP BITS(8,9) /*!< TIMER1 remapping */ +#define AFIO_PCF0_TIMER2_REMAP BITS(10,11) /*!< TIMER2 remapping */ +#define AFIO_PCF0_TIMER3_REMAP BIT(12) /*!< TIMER3 remapping */ +#define AFIO_PCF0_CAN0_REMAP BITS(13,14) /*!< CAN0 remapping */ +#define AFIO_PCF0_PD01_REMAP BIT(15) /*!< port D0/port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_PCF0_TIMER4CH3_IREMAP BIT(16) /*!< TIMER3 channel3 internal remapping */ +#define AFIO_PCF0_ENET_REMAP BIT(21) /*!< ethernet MAC I/O remapping */ +#define AFIO_PCF0_CAN1_REMAP BIT(22) /*!< CAN1 remapping */ +#define AFIO_PCF0_ENET_PHY_SEL BIT(23) /*!< ethernet MII or RMII PHY selection */ +#define AFIO_PCF0_SWJ_CFG BITS(24,26) /*!< serial wire JTAG configuration */ +#define AFIO_PCF0_SPI2_REMAP BIT(28) /*!< SPI2/I2S2 remapping */ +#define AFIO_PCF0_TIMER1ITI1_REMAP BIT(29) /*!< TIMER1 internal trigger 1 remapping */ +#define AFIO_PCF0_PTP_PPS_REMAP BIT(30) /*!< ethernet PTP PPS remapping */ + +#else +/* memory map and bit definitions for GD32F10X_MD, GD32F10X_HD devices and GD32F10X_XD devices */ +#define AFIO_PCF0_SPI0_REMAP BIT(0) /*!< SPI0 remapping */ +#define AFIO_PCF0_I2C0_REMAP BIT(1) /*!< I2C0 remapping */ +#define AFIO_PCF0_USART0_REMAP BIT(2) /*!< USART0 remapping */ +#define AFIO_PCF0_USART1_REMAP BIT(3) /*!< USART1 remapping */ +#define AFIO_PCF0_USART2_REMAP BITS(4,5) /*!< USART2 remapping */ +#define AFIO_PCF0_TIMER0_REMAP BITS(6,7) /*!< TIMER0 remapping */ +#define AFIO_PCF0_TIMER1_REMAP BITS(8,9) /*!< TIMER1 remapping */ +#define AFIO_PCF0_TIMER2_REMAP BITS(10,11) /*!< TIMER2 remapping */ +#define AFIO_PCF0_TIMER3_REMAP BIT(12) /*!< TIMER3 remapping */ +#define AFIO_PCF0_CAN_REMAP BITS(13,14) /*!< CAN remapping */ +#define AFIO_PCF0_PD01_REMAP BIT(15) /*!< port D0/port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_PCF0_TIMER4CH3_REMAP BIT(16) /*!< TIMER4 channel3 internal remapping */ +#define AFIO_PCF0_ADC0_ETRGINS_REMAP BIT(17) /*!< ADC 0 external trigger inserted conversion remapping */ +#define AFIO_PCF0_ADC0_ETRGREG_REMAP BIT(18) /*!< ADC 0 external trigger regular conversion remapping */ +#define AFIO_PCF0_ADC1_ETRGINS_REMAP BIT(19) /*!< ADC 1 external trigger inserted conversion remapping */ +#define AFIO_PCF0_ADC1_ETRGREG_REMAP BIT(20) /*!< ADC 1 external trigger regular conversion remapping */ +#define AFIO_PCF0_SWJ_CFG BITS(24,26) /*!< serial wire JTAG configuration */ +#endif /* GD32F10X_CL */ + +/* AFIO_EXTISS0 */ +#define AFIO_EXTI0_SS BITS(0,3) /*!< EXTI 0 sources selection */ +#define AFIO_EXTI1_SS BITS(4,7) /*!< EXTI 1 sources selection */ +#define AFIO_EXTI2_SS BITS(8,11) /*!< EXTI 2 sources selection */ +#define AFIO_EXTI3_SS BITS(12,15) /*!< EXTI 3 sources selection */ + +/* AFIO_EXTISS1 */ +#define AFIO_EXTI4_SS BITS(0,3) /*!< EXTI 4 sources selection */ +#define AFIO_EXTI5_SS BITS(4,7) /*!< EXTI 5 sources selection */ +#define AFIO_EXTI6_SS BITS(8,11) /*!< EXTI 6 sources selection */ +#define AFIO_EXTI7_SS BITS(12,15) /*!< EXTI 7 sources selection */ + +/* AFIO_EXTISS2 */ +#define AFIO_EXTI8_SS BITS(0,3) /*!< EXTI 8 sources selection */ +#define AFIO_EXTI9_SS BITS(4,7) /*!< EXTI 9 sources selection */ +#define AFIO_EXTI10_SS BITS(8,11) /*!< EXTI 10 sources selection */ +#define AFIO_EXTI11_SS BITS(12,15) /*!< EXTI 11 sources selection */ + +/* AFIO_EXTISS3 */ +#define AFIO_EXTI12_SS BITS(0,3) /*!< EXTI 12 sources selection */ +#define AFIO_EXTI13_SS BITS(4,7) /*!< EXTI 13 sources selection */ +#define AFIO_EXTI14_SS BITS(8,11) /*!< EXTI 14 sources selection */ +#define AFIO_EXTI15_SS BITS(12,15) /*!< EXTI 15 sources selection */ + +/* AFIO_PCF1 */ +#define AFIO_PCF1_TIMER8_REMAP BIT(5) /*!< TIMER8 remapping */ +#define AFIO_PCF1_TIMER9_REMAP BIT(6) /*!< TIMER9 remapping */ +#define AFIO_PCF1_TIMER10_REMAP BIT(7) /*!< TIMER10 remapping */ +#define AFIO_PCF1_TIMER12_REMAP BIT(8) /*!< TIMER12 remapping */ +#define AFIO_PCF1_TIMER13_REMAP BIT(9) /*!< TIMER13 remapping */ +#define AFIO_PCF1_EXMC_NADV BIT(10) /*!< EXMC_NADV connect/disconnect */ + +/* constants definitions */ +typedef FlagStatus bit_status; + +/* GPIO mode values set */ +#define GPIO_MODE_SET(n, mode) ((uint32_t)((uint32_t)(mode) << (4U * (n)))) +#define GPIO_MODE_MASK(n) (0xFU << (4U * (n))) + +/* GPIO mode definitions */ +#define GPIO_MODE_AIN ((uint8_t)0x00U) /*!< analog input mode */ +#define GPIO_MODE_IN_FLOATING ((uint8_t)0x04U) /*!< floating input mode */ +#define GPIO_MODE_IPD ((uint8_t)0x28U) /*!< pull-down input mode */ +#define GPIO_MODE_IPU ((uint8_t)0x48U) /*!< pull-up input mode */ +#define GPIO_MODE_OUT_OD ((uint8_t)0x14U) /*!< GPIO output with open-drain */ +#define GPIO_MODE_OUT_PP ((uint8_t)0x10U) /*!< GPIO output with push-pull */ +#define GPIO_MODE_AF_OD ((uint8_t)0x1CU) /*!< AFIO output with open-drain */ +#define GPIO_MODE_AF_PP ((uint8_t)0x18U) /*!< AFIO output with push-pull */ + +/* GPIO output max speed value */ +#define GPIO_OSPEED_10MHZ ((uint8_t)0x01U) /*!< output max speed 10MHz */ +#define GPIO_OSPEED_2MHZ ((uint8_t)0x02U) /*!< output max speed 2MHz */ +#define GPIO_OSPEED_50MHZ ((uint8_t)0x03U) /*!< output max speed 50MHz */ + +/* GPIO event output port definitions */ +#define GPIO_EVENT_PORT_GPIOA ((uint8_t)0x00U) /*!< event output port A */ +#define GPIO_EVENT_PORT_GPIOB ((uint8_t)0x01U) /*!< event output port B */ +#define GPIO_EVENT_PORT_GPIOC ((uint8_t)0x02U) /*!< event output port C */ +#define GPIO_EVENT_PORT_GPIOD ((uint8_t)0x03U) /*!< event output port D */ +#define GPIO_EVENT_PORT_GPIOE ((uint8_t)0x04U) /*!< event output port E */ + +/* GPIO output port source definitions */ +#define GPIO_PORT_SOURCE_GPIOA ((uint8_t)0x00U) /*!< output port source A */ +#define GPIO_PORT_SOURCE_GPIOB ((uint8_t)0x01U) /*!< output port source B */ +#define GPIO_PORT_SOURCE_GPIOC ((uint8_t)0x02U) /*!< output port source C */ +#define GPIO_PORT_SOURCE_GPIOD ((uint8_t)0x03U) /*!< output port source D */ +#define GPIO_PORT_SOURCE_GPIOE ((uint8_t)0x04U) /*!< output port source E */ +#define GPIO_PORT_SOURCE_GPIOF ((uint8_t)0x05U) /*!< output port source F */ +#define GPIO_PORT_SOURCE_GPIOG ((uint8_t)0x06U) /*!< output port source G */ + +/* GPIO event output pin definitions */ +#define GPIO_EVENT_PIN_0 ((uint8_t)0x00U) /*!< GPIO event pin 0 */ +#define GPIO_EVENT_PIN_1 ((uint8_t)0x01U) /*!< GPIO event pin 1 */ +#define GPIO_EVENT_PIN_2 ((uint8_t)0x02U) /*!< GPIO event pin 2 */ +#define GPIO_EVENT_PIN_3 ((uint8_t)0x03U) /*!< GPIO event pin 3 */ +#define GPIO_EVENT_PIN_4 ((uint8_t)0x04U) /*!< GPIO event pin 4 */ +#define GPIO_EVENT_PIN_5 ((uint8_t)0x05U) /*!< GPIO event pin 5 */ +#define GPIO_EVENT_PIN_6 ((uint8_t)0x06U) /*!< GPIO event pin 6 */ +#define GPIO_EVENT_PIN_7 ((uint8_t)0x07U) /*!< GPIO event pin 7 */ +#define GPIO_EVENT_PIN_8 ((uint8_t)0x08U) /*!< GPIO event pin 8 */ +#define GPIO_EVENT_PIN_9 ((uint8_t)0x09U) /*!< GPIO event pin 9 */ +#define GPIO_EVENT_PIN_10 ((uint8_t)0x0AU) /*!< GPIO event pin 10 */ +#define GPIO_EVENT_PIN_11 ((uint8_t)0x0BU) /*!< GPIO event pin 11 */ +#define GPIO_EVENT_PIN_12 ((uint8_t)0x0CU) /*!< GPIO event pin 12 */ +#define GPIO_EVENT_PIN_13 ((uint8_t)0x0DU) /*!< GPIO event pin 13 */ +#define GPIO_EVENT_PIN_14 ((uint8_t)0x0EU) /*!< GPIO event pin 14 */ +#define GPIO_EVENT_PIN_15 ((uint8_t)0x0FU) /*!< GPIO event pin 15 */ + +/* GPIO output pin source definitions */ +#define GPIO_PIN_SOURCE_0 ((uint8_t)0x00U) /*!< GPIO pin source 0 */ +#define GPIO_PIN_SOURCE_1 ((uint8_t)0x01U) /*!< GPIO pin source 1 */ +#define GPIO_PIN_SOURCE_2 ((uint8_t)0x02U) /*!< GPIO pin source 2 */ +#define GPIO_PIN_SOURCE_3 ((uint8_t)0x03U) /*!< GPIO pin source 3 */ +#define GPIO_PIN_SOURCE_4 ((uint8_t)0x04U) /*!< GPIO pin source 4 */ +#define GPIO_PIN_SOURCE_5 ((uint8_t)0x05U) /*!< GPIO pin source 5 */ +#define GPIO_PIN_SOURCE_6 ((uint8_t)0x06U) /*!< GPIO pin source 6 */ +#define GPIO_PIN_SOURCE_7 ((uint8_t)0x07U) /*!< GPIO pin source 7 */ +#define GPIO_PIN_SOURCE_8 ((uint8_t)0x08U) /*!< GPIO pin source 8 */ +#define GPIO_PIN_SOURCE_9 ((uint8_t)0x09U) /*!< GPIO pin source 9 */ +#define GPIO_PIN_SOURCE_10 ((uint8_t)0x0AU) /*!< GPIO pin source 10 */ +#define GPIO_PIN_SOURCE_11 ((uint8_t)0x0BU) /*!< GPIO pin source 11 */ +#define GPIO_PIN_SOURCE_12 ((uint8_t)0x0CU) /*!< GPIO pin source 12 */ +#define GPIO_PIN_SOURCE_13 ((uint8_t)0x0DU) /*!< GPIO pin source 13 */ +#define GPIO_PIN_SOURCE_14 ((uint8_t)0x0EU) /*!< GPIO pin source 14 */ +#define GPIO_PIN_SOURCE_15 ((uint8_t)0x0FU) /*!< GPIO pin source 15 */ + +/* GPIO pin definitions */ +#define GPIO_PIN_0 BIT(0) /*!< GPIO pin 0 */ +#define GPIO_PIN_1 BIT(1) /*!< GPIO pin 1 */ +#define GPIO_PIN_2 BIT(2) /*!< GPIO pin 2 */ +#define GPIO_PIN_3 BIT(3) /*!< GPIO pin 3 */ +#define GPIO_PIN_4 BIT(4) /*!< GPIO pin 4 */ +#define GPIO_PIN_5 BIT(5) /*!< GPIO pin 5 */ +#define GPIO_PIN_6 BIT(6) /*!< GPIO pin 6 */ +#define GPIO_PIN_7 BIT(7) /*!< GPIO pin 7 */ +#define GPIO_PIN_8 BIT(8) /*!< GPIO pin 8 */ +#define GPIO_PIN_9 BIT(9) /*!< GPIO pin 9 */ +#define GPIO_PIN_10 BIT(10) /*!< GPIO pin 10 */ +#define GPIO_PIN_11 BIT(11) /*!< GPIO pin 11 */ +#define GPIO_PIN_12 BIT(12) /*!< GPIO pin 12 */ +#define GPIO_PIN_13 BIT(13) /*!< GPIO pin 13 */ +#define GPIO_PIN_14 BIT(14) /*!< GPIO pin 14 */ +#define GPIO_PIN_15 BIT(15) /*!< GPIO pin 15 */ +#define GPIO_PIN_ALL BITS(0,15) /*!< GPIO pin all */ + +/* GPIO remap definitions */ +#define GPIO_SPI0_REMAP ((uint32_t)0x00000001U) /*!< SPI0 remapping */ +#define GPIO_I2C0_REMAP ((uint32_t)0x00000002U) /*!< I2C0 remapping */ +#define GPIO_USART0_REMAP ((uint32_t)0x00000004U) /*!< USART0 remapping */ +#define GPIO_USART1_REMAP ((uint32_t)0x00000008U) /*!< USART1 remapping */ +#define GPIO_USART2_PARTIAL_REMAP ((uint32_t)0x00140010U) /*!< USART2 partial remapping */ +#define GPIO_USART2_FULL_REMAP ((uint32_t)0x00140030U) /*!< USART2 full remapping */ +#define GPIO_TIMER0_PARTIAL_REMAP ((uint32_t)0x00160040U) /*!< TIMER0 partial remapping */ +#define GPIO_TIMER0_FULL_REMAP ((uint32_t)0x001600C0U) /*!< TIMER0 full remapping */ +#define GPIO_TIMER1_PARTIAL_REMAP0 ((uint32_t)0x00180100U) /*!< TIMER1 partial remapping */ +#define GPIO_TIMER1_PARTIAL_REMAP1 ((uint32_t)0x00180200U) /*!< TIMER1 partial remapping */ +#define GPIO_TIMER1_FULL_REMAP ((uint32_t)0x00180300U) /*!< TIMER1 full remapping */ +#define GPIO_TIMER2_PARTIAL_REMAP ((uint32_t)0x001A0800U) /*!< TIMER2 partial remapping */ +#define GPIO_TIMER2_FULL_REMAP ((uint32_t)0x001A0C00U) /*!< TIMER2 full remapping */ +#define GPIO_TIMER3_REMAP ((uint32_t)0x00001000U) /*!< TIMER3 remapping */ +#define GPIO_PD01_REMAP ((uint32_t)0x00008000U) /*!< PD01 remapping */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define GPIO_CAN_PARTIAL_REMAP ((uint32_t)0x001D4000U) /*!< CAN partial remapping(only for GD32F10X_MD devices, GD32F10X_HD devices and GD32F10X_XD devices) */ +#define GPIO_CAN_FULL_REMAP ((uint32_t)0x001D6000U) /*!< CAN full remapping(only for GD32F10X_MD devices, GD32F10X_HD devices and GD32F10X_XD devices) */ +#endif /* GD32F10X_MD||GD32F10X_HD||GD32F10X_XD */ +#if (defined(GD32F10X_CL) || defined(GD32F10X_HD)) +#define GPIO_TIMER4CH3_IREMAP ((uint32_t)0x00200001U) /*!< TIMER4 channel3 internal remapping(only for GD32F10X_CL devices and GD32F10X_HD devices) */ +#endif /* GD32F10X_CL||GD32F10X_HD */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define GPIO_ADC0_ETRGINS_REMAP ((uint32_t)0x00200002U) /*!< ADC0 external trigger inserted conversion remapping(only for GD32F10X_MD devices, GD32F10X_HD devices and GD32F10X_XD devices) */ +#define GPIO_ADC0_ETRGREG_REMAP ((uint32_t)0x00200004U) /*!< ADC0 external trigger regular conversion remapping(only for GD32F10X_MD devices, GD32F10X_HD devices and GD32F10X_XD devices) */ +#define GPIO_ADC1_ETRGINS_REMAP ((uint32_t)0x00200008U) /*!< ADC1 external trigger inserted conversion remapping(only for GD32F10X_MD devices, GD32F10X_HD devices and GD32F10X_XD devices) */ +#define GPIO_ADC1_ETRGREG_REMAP ((uint32_t)0x00200010U) /*!< ADC1 external trigger regular conversion remapping(only for GD32F10X_MD devices, GD32F10X_HD devices and GD32F10X_XD devices) */ +#endif /* GD32F10X_MD||GD32F10X_HD||GD32F10X_XD */ +#define GPIO_SWJ_NONJTRST_REMAP ((uint32_t)0x00300100U) /*!< full SWJ(JTAG-DP + SW-DP),but without NJTRST */ +#define GPIO_SWJ_SWDPENABLE_REMAP ((uint32_t)0x00300200U) /*!< JTAG-DP disabled and SW-DP enabled */ +#define GPIO_SWJ_DISABLE_REMAP ((uint32_t)0x00300400U) /*!< JTAG-DP disabled and SW-DP disabled */ +#ifdef GD32F10X_CL +#define GPIO_CAN0_PARTIAL_REMAP ((uint32_t)0x001D4000U) /*!< CAN0 partial remapping(only for GD32F10X_CL devices) */ +#define GPIO_CAN0_FULL_REMAP ((uint32_t)0x001D6000U) /*!< CAN0 full remapping(only for GD32F10X_CL devices) */ +#define GPIO_ENET_REMAP ((uint32_t)0x00200020U) /*!< ENET remapping(only for GD32F10X_CL devices) */ +#define GPIO_CAN1_REMAP ((uint32_t)0x00200040U) /*!< CAN1 remapping(only for GD32F10X_CL devices) */ +#define GPIO_SPI2_REMAP ((uint32_t)0x00201100U) /*!< SPI2 remapping(only for GD32F10X_CL devices) */ +#define GPIO_TIMER1ITI1_REMAP ((uint32_t)0x00202000U) /*!< TIMER1 internal trigger 1 remapping(only for GD32F10X_CL devices) */ +#define GPIO_PTP_PPS_REMAP ((uint32_t)0x00204000U) /*!< ethernet PTP PPS remapping(only for GD32F10X_CL devices) */ +#endif /* GD32F10X_CL */ +#ifdef GD32F10X_XD +#define GPIO_TIMER8_REMAP ((uint32_t)0x80000020U) /*!< TIMER8 remapping */ +#define GPIO_TIMER9_REMAP ((uint32_t)0x80000040U) /*!< TIMER9 remapping */ +#define GPIO_TIMER10_REMAP ((uint32_t)0x80000080U) /*!< TIMER10 remapping */ +#define GPIO_TIMER12_REMAP ((uint32_t)0x80000100U) /*!< TIMER12 remapping */ +#define GPIO_TIMER13_REMAP ((uint32_t)0x80000200U) /*!< TIMER13 remapping */ +#define GPIO_EXMC_NADV_REMAP ((uint32_t)0x80000400U) /*!< EXMC_NADV connect/disconnect */ +#endif /* GD32F10X_XD */ + +#ifdef GD32F10X_CL +/* ethernet MII or RMII PHY selection */ +#define GPIO_ENET_PHY_MII ((uint32_t)0x00000000U) /*!< configure ethernet MAC for connection with an MII PHY */ +#define GPIO_ENET_PHY_RMII AFIO_PCF0_ENET_PHY_SEL /*!< configure ethernet MAC for connection with an RMII PHY */ +#endif /* GD32F10X_CL */ + +/* function declarations */ +/* reset GPIO port */ +void gpio_deinit(uint32_t gpio_periph); +/* reset alternate function I/O(AFIO) */ +void gpio_afio_deinit(void); +/* GPIO parameter initialization */ +void gpio_init(uint32_t gpio_periph,uint32_t mode,uint32_t speed,uint32_t pin); + +/* set GPIO pin bit */ +void gpio_bit_set(uint32_t gpio_periph, uint32_t pin); +/* reset GPIO pin bit */ +void gpio_bit_reset(uint32_t gpio_periph, uint32_t pin); +/* write data to the specified GPIO pin */ +void gpio_bit_write(uint32_t gpio_periph, uint32_t pin, bit_status bit_value); +/* write data to the specified GPIO port */ +void gpio_port_write(uint32_t gpio_periph, uint16_t data); + +/* get GPIO pin input status */ +FlagStatus gpio_input_bit_get(uint32_t gpio_periph, uint32_t pin); +/* get GPIO port input status */ +uint16_t gpio_input_port_get(uint32_t gpio_periph); +/* get GPIO pin output status */ +FlagStatus gpio_output_bit_get(uint32_t gpio_periph, uint32_t pin); +/* get GPIO port output status */ +uint16_t gpio_output_port_get(uint32_t gpio_periph); + +/* configure GPIO pin remap */ +void gpio_pin_remap_config(uint32_t remap, ControlStatus newvalue); + +/* select GPIO pin exti sources */ +void gpio_exti_source_select(uint8_t output_port, uint8_t output_pin); +/* configure GPIO pin event output */ +void gpio_event_output_config(uint8_t output_port, uint8_t output_pin); +/* enable GPIO pin event output */ +void gpio_event_output_enable(void); +/* disable GPIO pin event output */ +void gpio_event_output_disable(void); + +/* lock GPIO pin bit */ +void gpio_pin_lock(uint32_t gpio_periph, uint32_t pin); + +#ifdef GD32F10X_CL +/* select ethernet MII or RMII PHY */ +void gpio_ethernet_phy_select(uint32_t gpio_enetsel); +#endif /* GD32F10X_CL */ + + +#endif /* GD32F10x_GPIO_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_i2c.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_i2c.h new file mode 100644 index 0000000000000000000000000000000000000000..ab884837dc31f972f48a009f05954651f36f2686 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_i2c.h @@ -0,0 +1,346 @@ +/*! + \file gd32f10x_i2c.h + \brief definitions for the I2C + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_I2C_H +#define GD32F10X_I2C_H + +#include "gd32f10x.h" + +/* I2Cx(x=0,1) definitions */ +#define I2C0 I2C_BASE /*!< I2C0 base address */ +#define I2C1 (I2C_BASE + 0x00000400U) /*!< I2C1 base address */ + +/* registers definitions */ +#define I2C_CTL0(i2cx) REG32((i2cx) + 0x00U) /*!< I2C control register 0 */ +#define I2C_CTL1(i2cx) REG32((i2cx) + 0x04U) /*!< I2C control register 1 */ +#define I2C_SADDR0(i2cx) REG32((i2cx) + 0x08U) /*!< I2C slave address register 0*/ +#define I2C_SADDR1(i2cx) REG32((i2cx) + 0x0CU) /*!< I2C slave address register */ +#define I2C_DATA(i2cx) REG32((i2cx) + 0x10U) /*!< I2C transfer buffer register */ +#define I2C_STAT0(i2cx) REG32((i2cx) + 0x14U) /*!< I2C transfer status register 0 */ +#define I2C_STAT1(i2cx) REG32((i2cx) + 0x18U) /*!< I2C transfer status register */ +#define I2C_CKCFG(i2cx) REG32((i2cx) + 0x1CU) /*!< I2C clock configure register */ +#define I2C_RT(i2cx) REG32((i2cx) + 0x20U) /*!< I2C rise time register */ + +/* bits definitions */ +/* I2Cx_CTL0 */ +#define I2C_CTL0_I2CEN BIT(0) /*!< peripheral enable */ +#define I2C_CTL0_SMBEN BIT(1) /*!< SMBus mode */ +#define I2C_CTL0_SMBSEL BIT(3) /*!< SMBus type */ +#define I2C_CTL0_ARPEN BIT(4) /*!< ARP enable */ +#define I2C_CTL0_PECEN BIT(5) /*!< PEC enable */ +#define I2C_CTL0_GCEN BIT(6) /*!< general call enable */ +#define I2C_CTL0_DISSTRC BIT(7) /*!< clock stretching disable (slave mode) */ +#define I2C_CTL0_START BIT(8) /*!< start generation */ +#define I2C_CTL0_STOP BIT(9) /*!< stop generation */ +#define I2C_CTL0_ACKEN BIT(10) /*!< acknowledge enable */ +#define I2C_CTL0_POAP BIT(11) /*!< acknowledge/PEC position (for data reception) */ +#define I2C_CTL0_PECTRANS BIT(12) /*!< packet error checking */ +#define I2C_CTL0_SALT BIT(13) /*!< SMBus alert */ +#define I2C_CTL0_SRESET BIT(15) /*!< software reset */ + +/* I2Cx_CTL1 */ +#define I2C_CTL1_I2CCLK BITS(0,5) /*!< I2CCLK[5:0] bits (peripheral clock frequency) */ +#define I2C_CTL1_ERRIE BIT(8) /*!< error interrupt enable */ +#define I2C_CTL1_EVIE BIT(9) /*!< event interrupt enable */ +#define I2C_CTL1_BUFIE BIT(10) /*!< buffer interrupt enable */ +#define I2C_CTL1_DMAON BIT(11) /*!< DMA requests enable */ +#define I2C_CTL1_DMALST BIT(12) /*!< DMA last transfer */ + +/* I2Cx_SADDR0 */ +#define I2C_SADDR0_ADDRESS0 BIT(0) /*!< bit 0 of a 10-bit address */ +#define I2C_SADDR0_ADDRESS BITS(1,7) /*!< 7-bit address or bits 7:1 of a 10-bit address */ +#define I2C_SADDR0_ADDRESS_H BITS(8,9) /*!< highest two bits of a 10-bit address */ +#define I2C_SADDR0_ADDFORMAT BIT(15) /*!< address mode for the I2C slave */ + +/* I2Cx_SADDR1 */ +#define I2C_SADDR1_DUADEN BIT(0) /*!< aual-address mode switch */ +#define I2C_SADDR1_ADDRESS2 BITS(1,7) /*!< second I2C address for the slave in dual-address mode */ + +/* I2Cx_DATA */ +#define I2C_DATA_TRB BITS(0,7) /*!< 8-bit data register */ + +/* I2Cx_STAT0 */ +#define I2C_STAT0_SBSEND BIT(0) /*!< start bit (master mode) */ +#define I2C_STAT0_ADDSEND BIT(1) /*!< address sent (master mode)/matched (slave mode) */ +#define I2C_STAT0_BTC BIT(2) /*!< byte transfer finished */ +#define I2C_STAT0_ADD10SEND BIT(3) /*!< 10-bit header sent (master mode) */ +#define I2C_STAT0_STPDET BIT(4) /*!< stop detection (slave mode) */ +#define I2C_STAT0_RBNE BIT(6) /*!< data register not empty (receivers) */ +#define I2C_STAT0_TBE BIT(7) /*!< data register empty (transmitters) */ +#define I2C_STAT0_BERR BIT(8) /*!< bus error */ +#define I2C_STAT0_LOSTARB BIT(9) /*!< arbitration lost (master mode) */ +#define I2C_STAT0_AERR BIT(10) /*!< acknowledge failure */ +#define I2C_STAT0_OUERR BIT(11) /*!< overrun/underrun */ +#define I2C_STAT0_PECERR BIT(12) /*!< PEC error in reception */ +#define I2C_STAT0_SMBTO BIT(14) /*!< timeout signal in SMBus mode */ +#define I2C_STAT0_SMBALT BIT(15) /*!< SMBus alert status */ + +/* I2Cx_STAT1 */ +#define I2C_STAT1_MASTER BIT(0) /*!< master/slave */ +#define I2C_STAT1_I2CBSY BIT(1) /*!< bus busy */ +#define I2C_STAT1_TRS BIT(2) /*!< transmitter/receiver */ +#define I2C_STAT1_RXGC BIT(4) /*!< general call address (slave mode) */ +#define I2C_STAT1_DEFSMB BIT(5) /*!< SMBus device default address (slave mode) */ +#define I2C_STAT1_HSTSMB BIT(6) /*!< SMBus host header (slave mode) */ +#define I2C_STAT1_DUMODF BIT(7) /*!< dual flag (slave mode) */ +#define I2C_STAT1_ECV BITS(8,15) /*!< packet error checking register */ + +/* I2Cx_CKCFG */ +#define I2C_CKCFG_CLKC BITS(0,11) /*!< clock control register in fast/standard mode (master mode) */ +#define I2C_CKCFG_DTCY BIT(14) /*!< fast mode duty cycle */ +#define I2C_CKCFG_FAST BIT(15) /*!< I2C speed selection in master mode */ + +/* I2Cx_RT */ +#define I2C_RT_RISETIME BITS(0,5) /*!< maximum rise time in fast/standard mode (Master mode) */ + +/* constants definitions */ +/* define the I2C bit position and its register index offset */ +#define I2C_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)) +#define I2C_REG_VAL(i2cx, offset) (REG32((i2cx) + (((uint32_t)(offset) & 0xFFFFU) >> 6))) +#define I2C_BIT_POS(val) ((uint32_t)(val) & 0x1FU) +#define I2C_REGIDX_BIT2(regidx, bitpos, regidx2, bitpos2) (((uint32_t)(regidx2) << 22) | (uint32_t)((bitpos2) << 16)\ + | (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos))) +#define I2C_REG_VAL2(i2cx, offset) (REG32((i2cx) + ((uint32_t)(offset) >> 22))) +#define I2C_BIT_POS2(val) (((uint32_t)(val) & 0x1F0000U) >> 16) + +/* register offset */ +#define I2C_CTL1_REG_OFFSET 0x04U /*!< CTL1 register offset */ +#define I2C_STAT0_REG_OFFSET 0x14U /*!< STAT0 register offset */ +#define I2C_STAT1_REG_OFFSET 0x18U /*!< STAT1 register offset */ +#define I2C_SAMCS_REG_OFFSET 0x80U /*!< SAMCS register offset */ + +/* I2C flags */ +typedef enum +{ + /* flags in STAT0 register */ + I2C_FLAG_SBSEND = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 0U), /*!< start condition sent out in master mode */ + I2C_FLAG_ADDSEND = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 1U), /*!< address is sent in master mode or received and matches in slave mode */ + I2C_FLAG_BTC = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 2U), /*!< byte transmission finishes */ + I2C_FLAG_ADD10SEND = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 3U), /*!< header of 10-bit address is sent in master mode */ + I2C_FLAG_STPDET = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 4U), /*!< stop condition detected in slave mode */ + I2C_FLAG_RBNE = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 6U), /*!< I2C_DATA is not Empty during receiving */ + I2C_FLAG_TBE = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 7U), /*!< I2C_DATA is empty during transmitting */ + I2C_FLAG_BERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 8U), /*!< a bus error occurs indication a unexpected start or stop condition on I2C bus */ + I2C_FLAG_LOSTARB = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 9U), /*!< arbitration lost in master mode */ + I2C_FLAG_AERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 10U), /*!< acknowledge error */ + I2C_FLAG_OUERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 11U), /*!< over-run or under-run situation occurs in slave mode */ + I2C_FLAG_PECERR = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 12U), /*!< PEC error when receiving data */ + I2C_FLAG_SMBTO = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 14U), /*!< timeout signal in SMBus mode */ + I2C_FLAG_SMBALT = I2C_REGIDX_BIT(I2C_STAT0_REG_OFFSET, 15U), /*!< SMBus alert status */ + /* flags in STAT1 register */ + I2C_FLAG_MASTER = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 0U), /*!< a flag indicating whether I2C block is in master or slave mode */ + I2C_FLAG_I2CBSY = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 1U), /*!< busy flag */ + I2C_FLAG_TRS = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 2U), /*!< whether the I2C is a transmitter or a receiver */ + I2C_FLAG_RXGC = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 4U), /*!< general call address (00h) received */ + I2C_FLAG_DEFSMB = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 5U), /*!< default address of SMBus device */ + I2C_FLAG_HSTSMB = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 6U), /*!< SMBus host header detected in slave mode */ + I2C_FLAG_DUMOD = I2C_REGIDX_BIT(I2C_STAT1_REG_OFFSET, 7U), /*!< dual flag in slave mode indicating which address is matched in dual-address mode */ +}i2c_flag_enum; + +/* I2C interrupt flags */ +typedef enum +{ + /* interrupt flags in CTL1 register */ + I2C_INT_FLAG_SBSEND = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U, I2C_STAT0_REG_OFFSET, 0U), /*!< start condition sent out in master mode interrupt flag */ + I2C_INT_FLAG_ADDSEND = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U, I2C_STAT0_REG_OFFSET, 1U), /*!< address is sent in master mode or received and matches in slave mode interrupt flag */ + I2C_INT_FLAG_BTC = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U, I2C_STAT0_REG_OFFSET, 2U), /*!< byte transmission finishes */ + I2C_INT_FLAG_ADD10SEND = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U, I2C_STAT0_REG_OFFSET, 3U), /*!< header of 10-bit address is sent in master mode interrupt flag */ + I2C_INT_FLAG_STPDET = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U, I2C_STAT0_REG_OFFSET, 4U), /*!< stop condition detected in slave mode interrupt flag */ + I2C_INT_FLAG_RBNE = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U, I2C_STAT0_REG_OFFSET, 6U), /*!< I2C_DATA is not Empty during receiving interrupt flag */ + I2C_INT_FLAG_TBE = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 9U, I2C_STAT0_REG_OFFSET, 7U), /*!< I2C_DATA is empty during transmitting interrupt flag */ + I2C_INT_FLAG_BERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U, I2C_STAT0_REG_OFFSET, 8U), /*!< a bus error occurs indication a unexpected start or stop condition on I2C bus interrupt flag */ + I2C_INT_FLAG_LOSTARB = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U, I2C_STAT0_REG_OFFSET, 9U), /*!< arbitration lost in master mode interrupt flag */ + I2C_INT_FLAG_AERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U, I2C_STAT0_REG_OFFSET, 10U), /*!< acknowledge error interrupt flag */ + I2C_INT_FLAG_OUERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U, I2C_STAT0_REG_OFFSET, 11U), /*!< over-run or under-run situation occurs in slave mode interrupt flag */ + I2C_INT_FLAG_PECERR = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U, I2C_STAT0_REG_OFFSET, 12U), /*!< PEC error when receiving data interrupt flag */ + I2C_INT_FLAG_SMBTO = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U, I2C_STAT0_REG_OFFSET, 14U), /*!< timeout signal in SMBus mode interrupt flag */ + I2C_INT_FLAG_SMBALT = I2C_REGIDX_BIT2(I2C_CTL1_REG_OFFSET, 8U, I2C_STAT0_REG_OFFSET, 15U), /*!< SMBus Alert status interrupt flag */ +}i2c_interrupt_flag_enum; + +/* I2C interrupt enable or disable */ +typedef enum +{ + /* interrupt in CTL1 register */ + I2C_INT_ERR = I2C_REGIDX_BIT(I2C_CTL1_REG_OFFSET, 8U), /*!< error interrupt enable */ + I2C_INT_EV = I2C_REGIDX_BIT(I2C_CTL1_REG_OFFSET, 9U), /*!< event interrupt enable */ + I2C_INT_BUF = I2C_REGIDX_BIT(I2C_CTL1_REG_OFFSET, 10U), /*!< buffer interrupt enable */ +}i2c_interrupt_enum; + +/* SMBus/I2C mode switch and SMBus type selection */ +#define I2C_I2CMODE_ENABLE ((uint32_t)0x00000000U) /*!< I2C mode */ +#define I2C_SMBUSMODE_ENABLE I2C_CTL0_SMBEN /*!< SMBus mode */ + +/* SMBus/I2C mode switch and SMBus type selection */ +#define I2C_SMBUS_DEVICE ((uint32_t)0x00000000U) /*!< SMBus mode device type */ +#define I2C_SMBUS_HOST I2C_CTL0_SMBSEL /*!< SMBus mode host type */ + +/* I2C transfer direction */ +#define I2C_RECEIVER ((uint32_t)0x00000001U) /*!< receiver */ +#define I2C_TRANSMITTER ((uint32_t)0xFFFFFFFEU) /*!< transmitter */ + +/* whether or not to send an ACK */ +#define I2C_ACK_DISABLE ((uint32_t)0x00000000U) /*!< ACK will be not sent */ +#define I2C_ACK_ENABLE ((uint32_t)0x00000001U) /*!< ACK will be sent */ + +/* I2C POAP position*/ +#define I2C_ACKPOS_NEXT ((uint32_t)0x00000000U) /*!< ACKEN bit decides whether or not to send ACK for the next byte */ +#define I2C_ACKPOS_CURRENT ((uint32_t)0x00000001U) /*!< ACKEN bit decides whether or not to send ACK or not for the current byte */ + +/* I2C dual-address mode switch */ +#define I2C_DUADEN_DISABLE ((uint32_t)0x00000000U) /*!< dual-address mode disabled */ +#define I2C_DUADEN_ENABLE ((uint32_t)0x00000001U) /*!< dual-address mode enabled */ + +/* whether or not to stretch SCL low */ +#define I2C_SCLSTRETCH_ENABLE ((uint32_t)0x00000000U) /*!< SCL stretching is enabled */ +#define I2C_SCLSTRETCH_DISABLE I2C_CTL0_DISSTRC /*!< SCL stretching is disabled */ + +/* whether or not to response to a general call */ +#define I2C_GCEN_ENABLE I2C_CTL0_GCEN /*!< slave will response to a general call */ +#define I2C_GCEN_DISABLE ((uint32_t)0x00000000U) /*!< slave will not response to a general call */ + +/* software reset I2C */ +#define I2C_SRESET_SET I2C_CTL0_SRESET /*!< I2C is under reset */ +#define I2C_SRESET_RESET ((uint32_t)0x00000000U) /*!< I2C is not under reset */ + +/* I2C DMA mode configure */ +/* DMA mode switch */ +#define I2C_DMA_ON I2C_CTL1_DMAON /*!< DMA mode enabled */ +#define I2C_DMA_OFF ((uint32_t)0x00000000U) /*!< DMA mode disabled */ + +/* flag indicating DMA last transfer */ +#define I2C_DMALST_ON I2C_CTL1_DMALST /*!< next DMA EOT is the last transfer */ +#define I2C_DMALST_OFF ((uint32_t)0x00000000U) /*!< next DMA EOT is not the last transfer */ + +/* I2C PEC configure */ +/* PEC enable */ +#define I2C_PEC_ENABLE I2C_CTL0_PECEN /*!< PEC calculation on */ +#define I2C_PEC_DISABLE ((uint32_t)0x00000000U) /*!< PEC calculation off */ + +/* PEC transfer */ +#define I2C_PECTRANS_ENABLE I2C_CTL0_PECTRANS /*!< transfer PEC */ +#define I2C_PECTRANS_DISABLE ((uint32_t)0x00000000U) /*!< not transfer PEC value */ + +/* I2C SMBus configure */ +/* issue or not alert through SMBA pin */ +#define I2C_SALTSEND_ENABLE I2C_CTL0_SALT /*!< issue alert through SMBA pin */ +#define I2C_SALTSEND_DISABLE ((uint32_t)0x00000000U) /*!< not issue alert through SMBA */ + +/* ARP protocol in SMBus switch */ +#define I2C_ARP_ENABLE I2C_CTL0_ARPEN /*!< ARP enable */ +#define I2C_ARP_DISABLE ((uint32_t)0x00000000U) /*!< ARP disable */ + +/* transmit I2C data */ +#define DATA_TRANS(regval) (BITS(0,7) & ((uint32_t)(regval) << 0)) + +/* receive I2C data */ +#define DATA_RECV(regval) GET_BITS((uint32_t)(regval), 0, 7) + +/* I2C duty cycle in fast mode */ +#define I2C_DTCY_2 ((uint32_t)0x00000000U) /*!< I2C fast mode Tlow/Thigh = 2 */ +#define I2C_DTCY_16_9 I2C_CKCFG_DTCY /*!< I2C fast mode Tlow/Thigh = 16/9 */ + +/* address mode for the I2C slave */ +#define I2C_ADDFORMAT_7BITS ((uint32_t)0x00000000U) /*!< address:7 bits */ +#define I2C_ADDFORMAT_10BITS I2C_SADDR0_ADDFORMAT /*!< address:10 bits */ + +/* function declarations */ +/* reset I2C */ +void i2c_deinit(uint32_t i2c_periph); +/* configure I2C clock */ +void i2c_clock_config(uint32_t i2c_periph, uint32_t clkspeed, uint32_t dutycyc); +/* configure I2C address */ +void i2c_mode_addr_config(uint32_t i2c_periph, uint32_t mode, uint32_t addformat, uint32_t addr); +/* SMBus type selection */ +void i2c_smbus_type_config(uint32_t i2c_periph, uint32_t type); +/* whether or not to send an ACK */ +void i2c_ack_config(uint32_t i2c_periph, uint32_t ack); +/* configure I2C POAP position */ +void i2c_ackpos_config(uint32_t i2c_periph, uint32_t pos); +/* master sends slave address */ +void i2c_master_addressing(uint32_t i2c_periph, uint32_t addr, uint32_t trandirection); +/* dual-address mode switch */ +void i2c_dualaddr_enable(uint32_t i2c_periph, uint32_t dualaddr); +/* enable I2C */ +void i2c_enable(uint32_t i2c_periph); +/* disable I2C */ +void i2c_disable(uint32_t i2c_periph); + +/* generate a START condition on I2C bus */ +void i2c_start_on_bus(uint32_t i2c_periph); +/* generate a STOP condition on I2C bus */ +void i2c_stop_on_bus(uint32_t i2c_periph); +/* I2C transmit data function */ +void i2c_data_transmit(uint32_t i2c_periph, uint8_t data); +/* I2C receive data function */ +uint8_t i2c_data_receive(uint32_t i2c_periph); +/* enable I2C DMA mode */ +void i2c_dma_enable(uint32_t i2c_periph, uint32_t dmastate); +/* configure whether next DMA EOT is DMA last transfer or not */ +void i2c_dma_last_transfer_config(uint32_t i2c_periph, uint32_t dmalast); +/* whether to stretch SCL low when data is not ready in slave mode */ +void i2c_stretch_scl_low_config(uint32_t i2c_periph, uint32_t stretchpara); +/* whether or not to response to a general call */ +void i2c_slave_response_to_gcall_config(uint32_t i2c_periph, uint32_t gcallpara); +/* software reset I2C */ +void i2c_software_reset_config(uint32_t i2c_periph, uint32_t sreset); + +/* I2C PEC calculation on or off */ +void i2c_pec_enable(uint32_t i2c_periph, uint32_t pecstate); +/* I2C whether to transfer PEC value */ +void i2c_pec_transfer_enable(uint32_t i2c_periph, uint32_t pecpara); +/* packet error checking value */ +uint8_t i2c_pec_value_get(uint32_t i2c_periph); +/* I2C issue alert through SMBA pin */ +void i2c_smbus_issue_alert(uint32_t i2c_periph, uint32_t smbuspara); +/* I2C ARP protocol in SMBus switch */ +void i2c_smbus_arp_enable(uint32_t i2c_periph, uint32_t arpstate); + +/* check I2C flag is set or not */ +FlagStatus i2c_flag_get(uint32_t i2c_periph, i2c_flag_enum flag); +/* clear I2C flag */ +void i2c_flag_clear(uint32_t i2c_periph, i2c_flag_enum flag); +/* enable I2C interrupt */ +void i2c_interrupt_enable(uint32_t i2c_periph, i2c_interrupt_enum interrupt); +/* disable I2C interrupt */ +void i2c_interrupt_disable(uint32_t i2c_periph, i2c_interrupt_enum interrupt); +/* check I2C interrupt flag */ +FlagStatus i2c_interrupt_flag_get(uint32_t i2c_periph, i2c_interrupt_flag_enum int_flag); +/* clear I2C interrupt flag */ +void i2c_interrupt_flag_clear(uint32_t i2c_periph, i2c_interrupt_flag_enum int_flag); + +#endif /* GD32E10X_I2C_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_misc.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_misc.h new file mode 100644 index 0000000000000000000000000000000000000000..1c692733c88c47d10efcd8c433de4aa3d3b7874e --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_misc.h @@ -0,0 +1,95 @@ +/*! + \file gd32f10x_misc.h + \brief definitions for the MISC + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_MISC_H +#define GD32F10X_MISC_H + +#include "gd32f10x.h" + +/* constants definitions */ +/* set the RAM and FLASH base address */ +#define NVIC_VECTTAB_RAM ((uint32_t)0x20000000) /*!< RAM base address */ +#define NVIC_VECTTAB_FLASH ((uint32_t)0x08000000) /*!< Flash base address */ + +/* set the NVIC vector table offset mask */ +#define NVIC_VECTTAB_OFFSET_MASK ((uint32_t)0x1FFFFF80) + +/* the register key mask, if you want to do the write operation, you should write 0x5FA to VECTKEY bits */ +#define NVIC_AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) + +/* priority group - define the pre-emption priority and the subpriority */ +#define NVIC_PRIGROUP_PRE0_SUB4 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority 4 bits for subpriority */ +#define NVIC_PRIGROUP_PRE1_SUB3 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority 3 bits for subpriority */ +#define NVIC_PRIGROUP_PRE2_SUB2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority 2 bits for subpriority */ +#define NVIC_PRIGROUP_PRE3_SUB1 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority 1 bits for subpriority */ +#define NVIC_PRIGROUP_PRE4_SUB0 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority 0 bits for subpriority */ + +/* choose the method to enter or exit the lowpower mode */ +#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< choose the the system whether enter low power mode by exiting from ISR */ +#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< choose the the system enter the DEEPSLEEP mode or SLEEP mode */ +#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< choose the interrupt source that can wake up the lowpower mode */ + +#define SCB_LPM_SLEEP_EXIT_ISR SCB_SCR_SLEEPONEXIT +#define SCB_LPM_DEEPSLEEP SCB_SCR_SLEEPDEEP +#define SCB_LPM_WAKE_BY_ALL_INT SCB_SCR_SEVONPEND + +/* choose the systick clock source */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0xFFFFFFFBU) /*!< systick clock source is from HCLK/8 */ +#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U) /*!< systick clock source is from HCLK */ + +/* function declarations */ +/* set the priority group */ +void nvic_priority_group_set(uint32_t nvic_prigroup); + +/* enable NVIC request */ +void nvic_irq_enable(uint8_t nvic_irq, uint8_t nvic_irq_pre_priority, uint8_t nvic_irq_sub_priority); +/* disable NVIC request */ +void nvic_irq_disable(uint8_t nvic_irq); + +/* set the NVIC vector table base address */ +void nvic_vector_table_set(uint32_t nvic_vict_tab, uint32_t offset); + +/* set the state of the low power mode */ +void system_lowpower_set(uint8_t lowpower_mode); +/* reset the state of the low power mode */ +void system_lowpower_reset(uint8_t lowpower_mode); + +/* set the systick clock source */ +void systick_clksource_set(uint32_t systick_clksource); + +#endif /* GD32F10X_MISC_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_pmu.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_pmu.h new file mode 100644 index 0000000000000000000000000000000000000000..3805d75ad5b9dc8a3b8c72ffd02b403662ca0fe1 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_pmu.h @@ -0,0 +1,129 @@ +/*! + \file gd32f10x_pmu.h + \brief definitions for the PMU + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_PMU_H +#define GD32F10X_PMU_H + +#include "gd32f10x.h" + +/* PMU definitions */ +#define PMU PMU_BASE /*!< PMU base address */ + +/* registers definitions */ +#define PMU_CTL REG32((PMU) + 0x00U) /*!< PMU control register */ +#define PMU_CS REG32((PMU) + 0x04U) /*!< PMU control and status register */ + +/* bits definitions */ +/* PMU_CTL */ +#define PMU_CTL_LDOLP BIT(0) /*!< LDO low power mode */ +#define PMU_CTL_STBMOD BIT(1) /*!< standby mode */ +#define PMU_CTL_WURST BIT(2) /*!< wakeup flag reset */ +#define PMU_CTL_STBRST BIT(3) /*!< standby flag reset */ +#define PMU_CTL_LVDEN BIT(4) /*!< low voltage detector enable */ +#define PMU_CTL_LVDT BITS(5,7) /*!< low voltage detector threshold */ +#define PMU_CTL_BKPWEN BIT(8) /*!< backup domain write enable */ + +/* PMU_CS */ +#define PMU_CS_WUF BIT(0) /*!< wakeup flag */ +#define PMU_CS_STBF BIT(1) /*!< standby flag */ +#define PMU_CS_LVDF BIT(2) /*!< low voltage detector status flag */ +#define PMU_CS_WUPEN BIT(8) /*!< wakeup pin enable */ + +/* constants definitions */ +/* PMU low voltage detector threshold definitions */ +#define CTL_LVDT(regval) (BITS(5,7)&((uint32_t)(regval) << 5)) +#define PMU_LVDT_0 CTL_LVDT(0) /*!< voltage threshold is 2.2V */ +#define PMU_LVDT_1 CTL_LVDT(1) /*!< voltage threshold is 2.3V */ +#define PMU_LVDT_2 CTL_LVDT(2) /*!< voltage threshold is 2.4V */ +#define PMU_LVDT_3 CTL_LVDT(3) /*!< voltage threshold is 2.5V */ +#define PMU_LVDT_4 CTL_LVDT(4) /*!< voltage threshold is 2.6V */ +#define PMU_LVDT_5 CTL_LVDT(5) /*!< voltage threshold is 2.7V */ +#define PMU_LVDT_6 CTL_LVDT(6) /*!< voltage threshold is 2.8V */ +#define PMU_LVDT_7 CTL_LVDT(7) /*!< voltage threshold is 2.9V */ + +/* PMU flag definitions */ +#define PMU_FLAG_WAKEUP PMU_CS_WUF /*!< wakeup flag status */ +#define PMU_FLAG_STANDBY PMU_CS_STBF /*!< standby flag status */ +#define PMU_FLAG_LVD PMU_CS_LVDF /*!< lvd flag status */ + +/* PMU ldo definitions */ +#define PMU_LDO_NORMAL ((uint32_t)0x00000000U) /*!< LDO normal work when PMU enter deepsleep mode */ +#define PMU_LDO_LOWPOWER PMU_CTL_LDOLP /*!< LDO work at low power status when PMU enter deepsleep mode */ + +/* PMU flag reset definitions */ +#define PMU_FLAG_RESET_WAKEUP ((uint8_t)0x00U) /*!< wakeup flag reset */ +#define PMU_FLAG_RESET_STANDBY ((uint8_t)0x01U) /*!< standby flag reset */ + +/* PMU command constants definitions */ +#define WFI_CMD ((uint8_t)0x00U) /*!< use WFI command */ +#define WFE_CMD ((uint8_t)0x01U) /*!< use WFE command */ + +/* function declarations */ +/* reset PMU registers */ +void pmu_deinit(void); + +/* select low voltage detector threshold */ +void pmu_lvd_select(uint32_t lvdt_n); +/* disable PMU lvd */ +void pmu_lvd_disable(void); + +/* set PMU mode */ +/* PMU work at sleep mode */ +void pmu_to_sleepmode(uint8_t sleepmodecmd); +/* PMU work at deepsleep mode */ +void pmu_to_deepsleepmode(uint32_t ldo, uint8_t deepsleepmodecmd); +/* PMU work at standby mode */ +void pmu_to_standbymode(uint8_t standbymodecmd); +/* enable PMU wakeup pin */ +void pmu_wakeup_pin_enable(void); +/* disable PMU wakeup pin */ +void pmu_wakeup_pin_disable(void); + +/* backup related functions */ +/* enable write access to the registers in backup domain */ +void pmu_backup_write_enable(void); +/* disable write access to the registers in backup domain */ +void pmu_backup_write_disable(void); + +/* flag functions */ +/* get flag state */ +FlagStatus pmu_flag_get(uint32_t flag); +/* clear flag bit */ +void pmu_flag_clear(uint32_t flag_reset); + +#endif /* GD32F10X_PMU_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_rcu.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_rcu.h new file mode 100644 index 0000000000000000000000000000000000000000..7053c053f4f6c7248c083c11b9d109efd46e9129 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_rcu.h @@ -0,0 +1,924 @@ +/*! + \file gd32f10x_rcu.h + \brief definitions for the RCU + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_RCU_H +#define GD32F10X_RCU_H + +#include "gd32f10x.h" + +/* RCU definitions */ +#define RCU RCU_BASE + +/* registers definitions */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_CTL REG32(RCU + 0x00U) /*!< control register */ +#define RCU_CFG0 REG32(RCU + 0x04U) /*!< clock configuration register 0 */ +#define RCU_INT REG32(RCU + 0x08U) /*!< clock interrupt register */ +#define RCU_APB2RST REG32(RCU + 0x0CU) /*!< APB2 reset register */ +#define RCU_APB1RST REG32(RCU + 0x10U) /*!< APB1 reset register */ +#define RCU_AHBEN REG32(RCU + 0x14U) /*!< AHB enable register */ +#define RCU_APB2EN REG32(RCU + 0x18U) /*!< APB2 enable register */ +#define RCU_APB1EN REG32(RCU + 0x1CU) /*!< APB1 enable register */ +#define RCU_BDCTL REG32(RCU + 0x20U) /*!< backup domain control register */ +#define RCU_RSTSCK REG32(RCU + 0x24U) /*!< reset source / clock register */ +#define RCU_DSV REG32(RCU + 0x34U) /*!< deep-sleep mode voltage register */ +#elif defined(GD32F10X_CL) +#define RCU_CTL REG32(RCU + 0x00U) /*!< control register */ +#define RCU_CFG0 REG32(RCU + 0x04U) /*!< clock configuration register 0 */ +#define RCU_INT REG32(RCU + 0x08U) /*!< clock interrupt register */ +#define RCU_APB2RST REG32(RCU + 0x0CU) /*!< APB2 reset register */ +#define RCU_APB1RST REG32(RCU + 0x10U) /*!< APB1 reset register */ +#define RCU_AHBEN REG32(RCU + 0x14U) /*!< AHB1 enable register */ +#define RCU_APB2EN REG32(RCU + 0x18U) /*!< APB2 enable register */ +#define RCU_APB1EN REG32(RCU + 0x1CU) /*!< APB1 enable register */ +#define RCU_BDCTL REG32(RCU + 0x20U) /*!< backup domain control register */ +#define RCU_RSTSCK REG32(RCU + 0x24U) /*!< reset source / clock register */ +#define RCU_AHBRST REG32(RCU + 0x28U) /*!< AHB reset register */ +#define RCU_CFG1 REG32(RCU + 0x2CU) /*!< clock configuration register 1 */ +#define RCU_DSV REG32(RCU + 0x34U) /*!< deep-sleep mode voltage register */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + +/* bits definitions */ +/* RCU_CTL */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_CTL_IRC8MEN BIT(0) /*!< internal high speed oscillator enable */ +#define RCU_CTL_IRC8MSTB BIT(1) /*!< IRC8M high speed internal oscillator stabilization flag */ +#define RCU_CTL_IRC8MADJ BITS(3,7) /*!< high speed internal oscillator clock trim adjust value */ +#define RCU_CTL_IRC8MCALIB BITS(8,15) /*!< high speed internal oscillator calibration value register */ +#define RCU_CTL_HXTALEN BIT(16) /*!< external high speed oscillator enable */ +#define RCU_CTL_HXTALSTB BIT(17) /*!< external crystal oscillator clock stabilization flag */ +#define RCU_CTL_HXTALBPS BIT(18) /*!< external crystal oscillator clock bypass mode enable */ +#define RCU_CTL_CKMEN BIT(19) /*!< HXTAL clock monitor enable */ +#define RCU_CTL_PLLEN BIT(24) /*!< PLL enable */ +#define RCU_CTL_PLLSTB BIT(25) /*!< PLL clock stabilization flag */ +#elif defined(GD32F10X_CL) +#define RCU_CTL_IRC8MEN BIT(0) /*!< internal high speed oscillator enable */ +#define RCU_CTL_IRC8MSTB BIT(1) /*!< IRC8M high speed internal oscillator stabilization flag */ +#define RCU_CTL_IRC8MADJ BITS(3,7) /*!< high speed internal oscillator clock trim adjust value */ +#define RCU_CTL_IRC8MCALIB BITS(8,15) /*!< high speed internal oscillator calibration value register */ +#define RCU_CTL_HXTALEN BIT(16) /*!< external high speed oscillator enable */ +#define RCU_CTL_HXTALSTB BIT(17) /*!< external crystal oscillator clock stabilization flag */ +#define RCU_CTL_HXTALBPS BIT(18) /*!< external crystal oscillator clock bypass mode enable */ +#define RCU_CTL_CKMEN BIT(19) /*!< HXTAL clock monitor enable */ +#define RCU_CTL_PLLEN BIT(24) /*!< PLL enable */ +#define RCU_CTL_PLLSTB BIT(25) /*!< PLL clock stabilization flag */ +#define RCU_CTL_PLL1EN BIT(26) /*!< PLL1 enable */ +#define RCU_CTL_PLL1STB BIT(27) /*!< PLL1 clock stabilization flag */ +#define RCU_CTL_PLL2EN BIT(28) /*!< PLL2 enable */ +#define RCU_CTL_PLL2STB BIT(29) /*!< PLL2 clock stabilization flag */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + +/* RCU_CFG0 */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_CFG0_SCS BITS(0,1) /*!< system clock switch */ +#define RCU_CFG0_SCSS BITS(2,3) /*!< system clock switch status */ +#define RCU_CFG0_AHBPSC BITS(4,7) /*!< AHB prescaler selection */ +#define RCU_CFG0_APB1PSC BITS(8,10) /*!< APB1 prescaler selection */ +#define RCU_CFG0_APB2PSC BITS(11,13) /*!< APB2 prescaler selection */ +#define RCU_CFG0_ADCPSC BITS(14,15) /*!< ADC prescaler selection */ +#define RCU_CFG0_PLLSEL BIT(16) /*!< PLL clock source selection */ +#define RCU_CFG0_PREDV0 BIT(17) /*!< PREDV0 division factor */ +#define RCU_CFG0_PLLMF BITS(18,21) /*!< PLL clock multiplication factor */ +#define RCU_CFG0_USBDPSC BITS(22,23) /*!< USBD clock prescaler selection */ +#define RCU_CFG0_CKOUT0SEL BITS(24,26) /*!< CKOUT0 clock source selection */ +#define RCU_CFG0_PLLMF_4 BIT(27) /*!< bit 4 of PLLMF */ +#define RCU_CFG0_ADCPSC_2 BIT(28) /*!< bit 2 of ADCPSC */ +#elif defined(GD32F10X_CL) +#define RCU_CFG0_SCS BITS(0,1) /*!< system clock switch */ +#define RCU_CFG0_SCSS BITS(2,3) /*!< system clock switch status */ +#define RCU_CFG0_AHBPSC BITS(4,7) /*!< AHB prescaler selection */ +#define RCU_CFG0_APB1PSC BITS(8,10) /*!< APB1 prescaler selection */ +#define RCU_CFG0_APB2PSC BITS(11,13) /*!< APB2 prescaler selection */ +#define RCU_CFG0_ADCPSC BITS(14,15) /*!< ADC prescaler selection */ +#define RCU_CFG0_PLLSEL BIT(16) /*!< PLL clock source selection */ +#define RCU_CFG0_PREDV0_LSB BIT(17) /*!< the LSB of PREDV0 division factor */ +#define RCU_CFG0_PLLMF BITS(18,21) /*!< PLL clock multiplication factor */ +#define RCU_CFG0_USBFSPSC BITS(22,23) /*!< USBFS clock prescaler selection */ +#define RCU_CFG0_CKOUT0SEL BITS(24,27) /*!< CKOUT0 clock source selection */ +#define RCU_CFG0_ADCPSC_2 BIT(28) /*!< bit 2 of ADCPSC */ +#define RCU_CFG0_PLLMF_4 BIT(29) /*!< bit 4 of PLLMF */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + +/* RCU_INT */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_INT_IRC40KSTBIF BIT(0) /*!< IRC40K stabilization interrupt flag */ +#define RCU_INT_LXTALSTBIF BIT(1) /*!< LXTAL stabilization interrupt flag */ +#define RCU_INT_IRC8MSTBIF BIT(2) /*!< IRC8M stabilization interrupt flag */ +#define RCU_INT_HXTALSTBIF BIT(3) /*!< HXTAL stabilization interrupt flag */ +#define RCU_INT_PLLSTBIF BIT(4) /*!< PLL stabilization interrupt flag */ +#define RCU_INT_CKMIF BIT(7) /*!< HXTAL clock stuck interrupt flag */ +#define RCU_INT_IRC40KSTBIE BIT(8) /*!< IRC40K stabilization interrupt enable */ +#define RCU_INT_LXTALSTBIE BIT(9) /*!< LXTAL stabilization interrupt enable */ +#define RCU_INT_IRC8MSTBIE BIT(10) /*!< IRC8M stabilization interrupt enable */ +#define RCU_INT_HXTALSTBIE BIT(11) /*!< HXTAL stabilization interrupt enable */ +#define RCU_INT_PLLSTBIE BIT(12) /*!< PLL stabilization interrupt enable */ +#define RCU_INT_IRC40KSTBIC BIT(16) /*!< IRC40K Stabilization interrupt clear */ +#define RCU_INT_LXTALSTBIC BIT(17) /*!< LXTAL Stabilization interrupt clear */ +#define RCU_INT_IRC8MSTBIC BIT(18) /*!< IRC8M Stabilization interrupt clear */ +#define RCU_INT_HXTALSTBIC BIT(19) /*!< HXTAL Stabilization interrupt clear */ +#define RCU_INT_PLLSTBIC BIT(20) /*!< PLL stabilization interrupt clear */ +#define RCU_INT_CKMIC BIT(23) /*!< HXTAL clock stuck interrupt clear */ +#elif defined(GD32F10X_CL) +#define RCU_INT_IRC40KSTBIF BIT(0) /*!< IRC40K stabilization interrupt flag */ +#define RCU_INT_LXTALSTBIF BIT(1) /*!< LXTAL stabilization interrupt flag */ +#define RCU_INT_IRC8MSTBIF BIT(2) /*!< IRC8M stabilization interrupt flag */ +#define RCU_INT_HXTALSTBIF BIT(3) /*!< HXTAL stabilization interrupt flag */ +#define RCU_INT_PLLSTBIF BIT(4) /*!< PLL stabilization interrupt flag */ +#define RCU_INT_PLL1STBIF BIT(5) /*!< PLL1 stabilization interrupt flag */ +#define RCU_INT_PLL2STBIF BIT(6) /*!< PLL2 stabilization interrupt flag */ +#define RCU_INT_CKMIF BIT(7) /*!< HXTAL clock stuck interrupt flag */ +#define RCU_INT_IRC40KSTBIE BIT(8) /*!< IRC40K stabilization interrupt enable */ +#define RCU_INT_LXTALSTBIE BIT(9) /*!< LXTAL stabilization interrupt enable */ +#define RCU_INT_IRC8MSTBIE BIT(10) /*!< IRC8M stabilization interrupt enable */ +#define RCU_INT_HXTALSTBIE BIT(11) /*!< HXTAL stabilization interrupt enable */ +#define RCU_INT_PLLSTBIE BIT(12) /*!< PLL stabilization interrupt enable */ +#define RCU_INT_PLL1STBIE BIT(13) /*!< PLL1 stabilization interrupt enable */ +#define RCU_INT_PLL2STBIE BIT(14) /*!< PLL2 stabilization interrupt enable */ +#define RCU_INT_IRC40KSTBIC BIT(16) /*!< IRC40K stabilization interrupt clear */ +#define RCU_INT_LXTALSTBIC BIT(17) /*!< LXTAL stabilization interrupt clear */ +#define RCU_INT_IRC8MSTBIC BIT(18) /*!< IRC8M stabilization interrupt clear */ +#define RCU_INT_HXTALSTBIC BIT(19) /*!< HXTAL stabilization interrupt clear */ +#define RCU_INT_PLLSTBIC BIT(20) /*!< PLL stabilization interrupt clear */ +#define RCU_INT_PLL1STBIC BIT(21) /*!< PLL1 stabilization interrupt clear */ +#define RCU_INT_PLL2STBIC BIT(22) /*!< PLL2 stabilization interrupt clear */ +#define RCU_INT_CKMIC BIT(23) /*!< HXTAL clock stuck interrupt clear */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + +/* RCU_APB2RST */ +#define RCU_APB2RST_AFRST BIT(0) /*!< alternate function I/O reset */ +#define RCU_APB2RST_PARST BIT(2) /*!< GPIO port A reset */ +#define RCU_APB2RST_PBRST BIT(3) /*!< GPIO port B reset */ +#define RCU_APB2RST_PCRST BIT(4) /*!< GPIO port C reset */ +#define RCU_APB2RST_PDRST BIT(5) /*!< GPIO port D reset */ +#define RCU_APB2RST_PERST BIT(6) /*!< GPIO port E reset */ +#define RCU_APB2RST_PFRST BIT(7) /*!< GPIO port F reset */ +#define RCU_APB2RST_PGRST BIT(8) /*!< GPIO port G reset */ +#define RCU_APB2RST_ADC0RST BIT(9) /*!< ADC0 reset */ +#define RCU_APB2RST_ADC1RST BIT(10) /*!< ADC1 reset */ +#define RCU_APB2RST_TIMER0RST BIT(11) /*!< TIMER0 reset */ +#define RCU_APB2RST_SPI0RST BIT(12) /*!< SPI0 reset */ +#define RCU_APB2RST_TIMER7RST BIT(13) /*!< TIMER7 reset */ +#define RCU_APB2RST_USART0RST BIT(14) /*!< USART0 reset */ +#ifndef GD32F10X_CL +#define RCU_APB2RST_ADC2RST BIT(15) /*!< ADC2 reset */ +#endif /* GD32F10X_CL */ +#ifdef GD32F10X_XD +#define RCU_APB2RST_TIMER8RST BIT(19) /*!< TIMER8 reset */ +#define RCU_APB2RST_TIMER9RST BIT(20) /*!< TIMER9 reset */ +#define RCU_APB2RST_TIMER10RST BIT(21) /*!< TIMER10 reset */ +#endif /* GD32F10X_XD */ + +/* RCU_APB1RST */ +#define RCU_APB1RST_TIMER1RST BIT(0) /*!< TIMER1 reset */ +#define RCU_APB1RST_TIMER2RST BIT(1) /*!< TIMER2 reset */ +#define RCU_APB1RST_TIMER3RST BIT(2) /*!< TIMER3 reset */ +#define RCU_APB1RST_TIMER4RST BIT(3) /*!< TIMER4 reset */ +#define RCU_APB1RST_TIMER5RST BIT(4) /*!< TIMER5 reset */ +#define RCU_APB1RST_TIMER6RST BIT(5) /*!< TIMER6 reset */ +#ifdef GD32F10X_XD +#define RCU_APB1RST_TIMER11RST BIT(6) /*!< TIMER11 reset */ +#define RCU_APB1RST_TIMER12RST BIT(7) /*!< TIMER12 reset */ +#define RCU_APB1RST_TIMER13RST BIT(8) /*!< TIMER13 reset */ +#endif /* GD32F10X_XD */ +#define RCU_APB1RST_WWDGTRST BIT(11) /*!< WWDGT reset */ +#define RCU_APB1RST_SPI1RST BIT(14) /*!< SPI1 reset */ +#define RCU_APB1RST_SPI2RST BIT(15) /*!< SPI2 reset */ +#define RCU_APB1RST_USART1RST BIT(17) /*!< USART1 reset */ +#define RCU_APB1RST_USART2RST BIT(18) /*!< USART2 reset */ +#define RCU_APB1RST_UART3RST BIT(19) /*!< UART3 reset */ +#define RCU_APB1RST_UART4RST BIT(20) /*!< UART4 reset */ +#define RCU_APB1RST_I2C0RST BIT(21) /*!< I2C0 reset */ +#define RCU_APB1RST_I2C1RST BIT(22) /*!< I2C1 reset */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_APB1RST_USBDRST BIT(23) /*!< USBD reset */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ +#define RCU_APB1RST_CAN0RST BIT(25) /*!< CAN0 reset */ +#ifdef GD32F10X_CL +#define RCU_APB1RST_CAN1RST BIT(26) /*!< CAN1 reset */ +#endif /* GD32F10X_CL */ +#define RCU_APB1RST_BKPIRST BIT(27) /*!< backup interface reset */ +#define RCU_APB1RST_PMURST BIT(28) /*!< PMU reset */ +#define RCU_APB1RST_DACRST BIT(29) /*!< DAC reset */ + +/* RCU_AHBEN */ +#define RCU_AHBEN_DMA0EN BIT(0) /*!< DMA0 clock enable */ +#define RCU_AHBEN_DMA1EN BIT(1) /*!< DMA1 clock enable */ +#define RCU_AHBEN_SRAMSPEN BIT(2) /*!< SRAM clock enable when sleep mode */ +#define RCU_AHBEN_FMCSPEN BIT(4) /*!< FMC clock enable when sleep mode */ +#define RCU_AHBEN_CRCEN BIT(6) /*!< CRC clock enable */ +#define RCU_AHBEN_EXMCEN BIT(8) /*!< EXMC clock enable */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_AHBEN_SDIOEN BIT(10) /*!< SDIO clock enable */ +#elif defined(GD32F10X_CL) +#define RCU_AHBEN_USBFSEN BIT(12) /*!< USBFS clock enable */ +#define RCU_AHBEN_ENETEN BIT(14) /*!< ENET clock enable */ +#define RCU_AHBEN_ENETTXEN BIT(15) /*!< Ethernet TX clock enable */ +#define RCU_AHBEN_ENETRXEN BIT(16) /*!< Ethernet RX clock enable */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + +/* RCU_APB2EN */ +#define RCU_APB2EN_AFEN BIT(0) /*!< alternate function IO clock enable */ +#define RCU_APB2EN_PAEN BIT(2) /*!< GPIO port A clock enable */ +#define RCU_APB2EN_PBEN BIT(3) /*!< GPIO port B clock enable */ +#define RCU_APB2EN_PCEN BIT(4) /*!< GPIO port C clock enable */ +#define RCU_APB2EN_PDEN BIT(5) /*!< GPIO port D clock enable */ +#define RCU_APB2EN_PEEN BIT(6) /*!< GPIO port E clock enable */ +#define RCU_APB2EN_PFEN BIT(7) /*!< GPIO port F clock enable */ +#define RCU_APB2EN_PGEN BIT(8) /*!< GPIO port G clock enable */ +#define RCU_APB2EN_ADC0EN BIT(9) /*!< ADC0 clock enable */ +#define RCU_APB2EN_ADC1EN BIT(10) /*!< ADC1 clock enable */ +#define RCU_APB2EN_TIMER0EN BIT(11) /*!< TIMER0 clock enable */ +#define RCU_APB2EN_SPI0EN BIT(12) /*!< SPI0 clock enable */ +#define RCU_APB2EN_TIMER7EN BIT(13) /*!< TIMER7 clock enable */ +#define RCU_APB2EN_USART0EN BIT(14) /*!< USART0 clock enable */ +#ifndef GD32F10X_CL +#define RCU_APB2EN_ADC2EN BIT(15) /*!< ADC2 clock enable */ +#endif /* GD32F10X_CL */ +#ifdef GD32F10X_XD +#define RCU_APB2EN_TIMER8EN BIT(19) /*!< TIMER8 clock enable */ +#define RCU_APB2EN_TIMER9EN BIT(20) /*!< TIMER9 clock enable */ +#define RCU_APB2EN_TIMER10EN BIT(21) /*!< TIMER10 clock enable */ +#endif /* GD32F10X_XD */ + +/* RCU_APB1EN */ +#define RCU_APB1EN_TIMER1EN BIT(0) /*!< TIMER1 clock enable */ +#define RCU_APB1EN_TIMER2EN BIT(1) /*!< TIMER2 clock enable */ +#define RCU_APB1EN_TIMER3EN BIT(2) /*!< TIMER3 clock enable */ +#define RCU_APB1EN_TIMER4EN BIT(3) /*!< TIMER4 clock enable */ +#define RCU_APB1EN_TIMER5EN BIT(4) /*!< TIMER5 clock enable */ +#define RCU_APB1EN_TIMER6EN BIT(5) /*!< TIMER6 clock enable */ +#ifdef GD32F10X_XD +#define RCU_APB1EN_TIMER11EN BIT(6) /*!< TIMER11 clock enable */ +#define RCU_APB1EN_TIMER12EN BIT(7) /*!< TIMER12 clock enable */ +#define RCU_APB1EN_TIMER13EN BIT(8) /*!< TIMER13 clock enable */ +#endif /* GD32F10X_XD */ +#define RCU_APB1EN_WWDGTEN BIT(11) /*!< WWDGT clock enable */ +#define RCU_APB1EN_SPI1EN BIT(14) /*!< SPI1 clock enable */ +#define RCU_APB1EN_SPI2EN BIT(15) /*!< SPI2 clock enable */ +#define RCU_APB1EN_USART1EN BIT(17) /*!< USART1 clock enable */ +#define RCU_APB1EN_USART2EN BIT(18) /*!< USART2 clock enable */ +#define RCU_APB1EN_UART3EN BIT(19) /*!< UART3 clock enable */ +#define RCU_APB1EN_UART4EN BIT(20) /*!< UART4 clock enable */ +#define RCU_APB1EN_I2C0EN BIT(21) /*!< I2C0 clock enable */ +#define RCU_APB1EN_I2C1EN BIT(22) /*!< I2C1 clock enable */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_APB1EN_USBDEN BIT(23) /*!< USBD clock enable */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ +#define RCU_APB1EN_CAN0EN BIT(25) /*!< CAN0 clock enable */ +#ifdef GD32F10X_CL +#define RCU_APB1EN_CAN1EN BIT(26) /*!< CAN1 clock enable */ +#endif /* GD32F10X_CL */ +#define RCU_APB1EN_BKPIEN BIT(27) /*!< backup interface clock enable */ +#define RCU_APB1EN_PMUEN BIT(28) /*!< PMU clock enable */ +#define RCU_APB1EN_DACEN BIT(29) /*!< DAC clock enable */ + +/* RCU_BDCTL */ +#define RCU_BDCTL_LXTALEN BIT(0) /*!< LXTAL enable */ +#define RCU_BDCTL_LXTALSTB BIT(1) /*!< low speed crystal oscillator stabilization flag */ +#define RCU_BDCTL_LXTALBPS BIT(2) /*!< LXTAL bypass mode enable */ +#define RCU_BDCTL_RTCSRC BITS(8,9) /*!< RTC clock entry selection */ +#define RCU_BDCTL_RTCEN BIT(15) /*!< RTC clock enable */ +#define RCU_BDCTL_BKPRST BIT(16) /*!< backup domain reset */ + +/* RCU_RSTSCK */ +#define RCU_RSTSCK_IRC40KEN BIT(0) /*!< IRC40K enable */ +#define RCU_RSTSCK_IRC40KSTB BIT(1) /*!< IRC40K stabilization flag */ +#define RCU_RSTSCK_RSTFC BIT(24) /*!< reset flag clear */ +#define RCU_RSTSCK_EPRSTF BIT(26) /*!< external pin reset flag */ +#define RCU_RSTSCK_PORRSTF BIT(27) /*!< power reset flag */ +#define RCU_RSTSCK_SWRSTF BIT(28) /*!< software reset flag */ +#define RCU_RSTSCK_FWDGTRSTF BIT(29) /*!< free watchdog timer reset flag */ +#define RCU_RSTSCK_WWDGTRSTF BIT(30) /*!< window watchdog timer reset flag */ +#define RCU_RSTSCK_LPRSTF BIT(31) /*!< low-power reset flag */ + +#ifdef GD32F10X_CL +/* RCU_AHBRST */ +#define RCU_AHBRST_USBFSRST BIT(12) /*!< USBFS reset */ +#define RCU_AHBRST_ENETRST BIT(14) /*!< ENET reset */ +#endif /* GD32F10X_CL */ + +#if defined(GD32F10X_CL) +/* RCU_CFG1 */ +#define RCU_CFG1_PREDV0 BITS(0,3) /*!< PREDV0 division factor */ +#define RCU_CFG1_PREDV1 BITS(4,7) /*!< PREDV1 division factor */ +#define RCU_CFG1_PLL1MF BITS(8,11) /*!< PLL1 clock multiplication factor */ +#define RCU_CFG1_PLL2MF BITS(12,15) /*!< PLL2 clock multiplication factor */ +#define RCU_CFG1_PREDV0SEL BIT(16) /*!< PREDV0 input clock source selection */ +#define RCU_CFG1_I2S1SEL BIT(17) /*!< I2S1 clock source selection */ +#define RCU_CFG1_I2S2SEL BIT(18) /*!< I2S2 clock source selection */ +#endif /* GD32F10X_CL */ + +/* RCU_DSV */ +#define RCU_DSV_DSLPVS BITS(0,2) /*!< deep-sleep mode voltage select */ + +/* constants definitions */ +/* define the peripheral clock enable bit position and its register index offset */ +#define RCU_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)) +#define RCU_REG_VAL(periph) (REG32(RCU + ((uint32_t)(periph) >> 6))) +#define RCU_BIT_POS(val) ((uint32_t)(val) & 0x1FU) + +/* register offset */ +/* peripherals enable */ +#define AHBEN_REG_OFFSET 0x14U /*!< AHB enable register offset */ +#define APB1EN_REG_OFFSET 0x1CU /*!< APB1 enable register offset */ +#define APB2EN_REG_OFFSET 0x18U /*!< APB2 enable register offset */ + +/* peripherals reset */ +#define AHBRST_REG_OFFSET 0x28U /*!< AHB reset register offset */ +#define APB1RST_REG_OFFSET 0x10U /*!< APB1 reset register offset */ +#define APB2RST_REG_OFFSET 0x0CU /*!< APB2 reset register offset */ +#define RSTSCK_REG_OFFSET 0x24U /*!< reset source/clock register offset */ + +/* clock control */ +#define CTL_REG_OFFSET 0x00U /*!< control register offset */ +#define BDCTL_REG_OFFSET 0x20U /*!< backup domain control register offset */ + +/* clock stabilization and stuck interrupt */ +#define INT_REG_OFFSET 0x08U /*!< clock interrupt register offset */ + +/* configuration register */ +#define CFG0_REG_OFFSET 0x04U /*!< clock configuration register 0 offset */ +#define CFG1_REG_OFFSET 0x2CU /*!< clock configuration register 1 offset */ + +/* peripheral clock enable */ +typedef enum +{ + /* AHB peripherals */ + RCU_DMA0 = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 0U), /*!< DMA0 clock */ + RCU_DMA1 = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 1U), /*!< DMA1 clock */ + RCU_CRC = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 6U), /*!< CRC clock */ + RCU_EXMC = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 8U), /*!< EXMC clock */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + RCU_SDIO = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 10U), /*!< SDIO clock */ +#elif defined(GD32F10X_CL) + RCU_USBFS = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 12U), /*!< USBFS clock */ + RCU_ENET = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 14U), /*!< ENET clock */ + RCU_ENETTX = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 15U), /*!< ENETTX clock */ + RCU_ENETRX = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 16U), /*!< ENETRX clock */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + /* APB1 peripherals */ + RCU_TIMER1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 0U), /*!< TIMER1 clock */ + RCU_TIMER2 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 1U), /*!< TIMER2 clock */ + RCU_TIMER3 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 2U), /*!< TIMER3 clock */ + RCU_TIMER4 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 3U), /*!< TIMER4 clock */ + RCU_TIMER5 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 4U), /*!< TIMER5 clock */ + RCU_TIMER6 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 5U), /*!< TIMER6 clock */ +#if defined(GD32F10X_XD) + RCU_TIMER11 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 6U), /*!< TIMER11 clock */ + RCU_TIMER12 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 7U), /*!< TIMER12 clock */ + RCU_TIMER13 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 8U), /*!< TIMER13 clock */ +#endif /* GD32F10X_XD */ + RCU_WWDGT = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 11U), /*!< WWDGT clock */ + RCU_SPI1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 14U), /*!< SPI1 clock */ + RCU_SPI2 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 15U), /*!< SPI2 clock */ + RCU_USART1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 17U), /*!< USART1 clock */ + RCU_USART2 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 18U), /*!< USART2 clock */ + RCU_UART3 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 19U), /*!< UART3 clock */ + RCU_UART4 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 20U), /*!< UART4 clock */ + RCU_I2C0 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 21U), /*!< I2C0 clock */ + RCU_I2C1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 22U), /*!< I2C1 clock */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + RCU_USBD = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 23U), /*!< USBD clock */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + RCU_CAN0 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 25U), /*!< CAN0 clock */ +#ifdef GD32F10X_CL + RCU_CAN1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 26U), /*!< CAN1 clock */ +#endif /* GD32F10X_CL */ + RCU_BKPI = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 27U), /*!< BKPI clock */ + RCU_PMU = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 28U), /*!< PMU clock */ + RCU_DAC = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 29U), /*!< DAC clock */ + RCU_RTC = RCU_REGIDX_BIT(BDCTL_REG_OFFSET, 15U), /*!< RTC clock */ + + /* APB2 peripherals */ + RCU_AF = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 0U), /*!< alternate function clock */ + RCU_GPIOA = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 2U), /*!< GPIOA clock */ + RCU_GPIOB = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 3U), /*!< GPIOB clock */ + RCU_GPIOC = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 4U), /*!< GPIOC clock */ + RCU_GPIOD = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 5U), /*!< GPIOD clock */ + RCU_GPIOE = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 6U), /*!< GPIOE clock */ + RCU_GPIOF = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 7U), /*!< GPIOF clock */ + RCU_GPIOG = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 8U), /*!< GPIOG clock */ + RCU_ADC0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 9U), /*!< ADC0 clock */ + RCU_ADC1 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 10U), /*!< ADC1 clock */ + RCU_TIMER0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 11U), /*!< TIMER0 clock */ + RCU_SPI0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 12U), /*!< SPI0 clock */ + RCU_TIMER7 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 13U), /*!< TIMER7 clock */ + RCU_USART0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 14U), /*!< USART0 clock */ +#ifndef GD32F10X_CL + RCU_ADC2 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 15U), /*!< ADC2 clock */ +#endif /* GD32F10X_CL */ +#ifdef GD32F10X_XD + RCU_TIMER8 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 19U), /*!< TIMER8 clock */ + RCU_TIMER9 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 20U), /*!< TIMER9 clock */ + RCU_TIMER10 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 21U), /*!< TIMER10 clock */ +#endif /* GD32F10X_XD */ +}rcu_periph_enum; + +/* peripheral clock enable when sleep mode*/ +typedef enum +{ + /* AHB peripherals */ + RCU_SRAM_SLP = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 2U), /*!< SRAM clock */ + RCU_FMC_SLP = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 4U), /*!< FMC clock */ +}rcu_periph_sleep_enum; + +/* peripherals reset */ +typedef enum +{ + /* AHB peripherals */ +#ifdef GD32F10X_CL + RCU_USBFSRST = RCU_REGIDX_BIT(AHBRST_REG_OFFSET, 12U), /*!< USBFS clock reset */ + RCU_ENETRST = RCU_REGIDX_BIT(AHBRST_REG_OFFSET, 14U), /*!< ENET clock reset */ +#endif /* GD32F10X_CL */ + + /* APB1 peripherals */ + RCU_TIMER1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 0U), /*!< TIMER1 clock reset */ + RCU_TIMER2RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 1U), /*!< TIMER2 clock reset */ + RCU_TIMER3RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 2U), /*!< TIMER3 clock reset */ + RCU_TIMER4RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 3U), /*!< TIMER4 clock reset */ + RCU_TIMER5RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 4U), /*!< TIMER5 clock reset */ + RCU_TIMER6RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 5U), /*!< TIMER6 clock reset */ +#ifdef GD32F10X_XD + RCU_TIMER11RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 6U), /*!< TIMER11 clock reset */ + RCU_TIMER12RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 7U), /*!< TIMER12 clock reset */ + RCU_TIMER13RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 8U), /*!< TIMER13 clock reset */ +#endif /* GD32F10X_XD */ + RCU_WWDGTRST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 11U), /*!< WWDGT clock reset */ + RCU_SPI1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 14U), /*!< SPI1 clock reset */ + RCU_SPI2RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 15U), /*!< SPI2 clock reset */ + RCU_USART1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 17U), /*!< USART1 clock reset */ + RCU_USART2RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 18U), /*!< USART2 clock reset */ + RCU_UART3RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 19U), /*!< UART3 clock reset */ + RCU_UART4RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 20U), /*!< UART4 clock reset */ + RCU_I2C0RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 21U), /*!< I2C0 clock reset */ + RCU_I2C1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 22U), /*!< I2C1 clock reset */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + RCU_USBDRST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 23U), /*!< USBD clock reset */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + RCU_CAN0RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 25U), /*!< CAN0 clock reset */ +#ifdef GD32F10X_CL + RCU_CAN1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 26U), /*!< CAN1 clock reset */ +#endif /* GD32F10X_CL */ + RCU_BKPIRST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 27U), /*!< BKPI clock reset */ + RCU_PMURST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 28U), /*!< PMU clock reset */ + RCU_DACRST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 29U), /*!< DAC clock reset */ + + /* APB2 peripherals */ + RCU_AFRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 0U), /*!< alternate function clock reset */ + RCU_GPIOARST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 2U), /*!< GPIOA clock reset */ + RCU_GPIOBRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 3U), /*!< GPIOB clock reset */ + RCU_GPIOCRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 4U), /*!< GPIOC clock reset */ + RCU_GPIODRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 5U), /*!< GPIOD clock reset */ + RCU_GPIOERST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 6U), /*!< GPIOE clock reset */ + RCU_GPIOFRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 7U), /*!< GPIOF clock reset */ + RCU_GPIOGRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 8U), /*!< GPIOG clock reset */ + RCU_ADC0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 9U), /*!< ADC0 clock reset */ + RCU_ADC1RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 10U), /*!< ADC1 clock reset */ + RCU_TIMER0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 11U), /*!< TIMER0 clock reset */ + RCU_SPI0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 12U), /*!< SPI0 clock reset */ + RCU_TIMER7RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 13U), /*!< TIMER7 clock reset */ + RCU_USART0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 14U), /*!< USART0 clock reset */ +#ifndef GD32F10X_CL + RCU_ADC2RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 15U), /*!< ADC2 clock reset */ +#endif /* GD32F10X_CL */ +#ifdef GD32F10X_XD + RCU_TIMER8RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 19U), /*!< TIMER8 clock reset */ + RCU_TIMER9RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 20U), /*!< TIMER9 clock reset */ + RCU_TIMER10RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 21U), /*!< TIMER10 clock reset */ +#endif /* GD32F10X_XD */ +}rcu_periph_reset_enum; + +/* clock stabilization and peripheral reset flags */ +typedef enum +{ + /* clock stabilization flags */ + RCU_FLAG_IRC8MSTB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 1U), /*!< IRC8M stabilization flags */ + RCU_FLAG_HXTALSTB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 17U), /*!< HXTAL stabilization flags */ + RCU_FLAG_PLLSTB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 25U), /*!< PLL stabilization flags */ +#ifdef GD32F10X_CL + RCU_FLAG_PLL1STB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 27U), /*!< PLL1 stabilization flags */ + RCU_FLAG_PLL2STB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 29U), /*!< PLL2 stabilization flags */ +#endif /* GD32F10X_CL */ + RCU_FLAG_LXTALSTB = RCU_REGIDX_BIT(BDCTL_REG_OFFSET, 1U), /*!< LXTAL stabilization flags */ + RCU_FLAG_IRC40KSTB = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 1U), /*!< IRC40K stabilization flags */ + /* reset source flags */ + RCU_FLAG_EPRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 26U), /*!< external PIN reset flags */ + RCU_FLAG_PORRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 27U), /*!< power reset flags */ + RCU_FLAG_SWRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 28U), /*!< software reset flags */ + RCU_FLAG_FWDGTRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 29U), /*!< FWDGT reset flags */ + RCU_FLAG_WWDGTRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 30U), /*!< WWDGT reset flags */ + RCU_FLAG_LPRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 31U), /*!< low-power reset flags */ +}rcu_flag_enum; + +/* clock stabilization and ckm interrupt flags */ +typedef enum +{ + RCU_INT_FLAG_IRC40KSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 0U), /*!< IRC40K stabilization interrupt flag */ + RCU_INT_FLAG_LXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 1U), /*!< LXTAL stabilization interrupt flag */ + RCU_INT_FLAG_IRC8MSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 2U), /*!< IRC8M stabilization interrupt flag */ + RCU_INT_FLAG_HXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 3U), /*!< HXTAL stabilization interrupt flag */ + RCU_INT_FLAG_PLLSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 4U), /*!< PLL stabilization interrupt flag */ +#ifdef GD32F10X_CL + RCU_INT_FLAG_PLL1STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 5U), /*!< PLL1 stabilization interrupt flag */ + RCU_INT_FLAG_PLL2STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 6U), /*!< PLL2 stabilization interrupt flag */ +#endif /* GD32F10X_CL */ + RCU_INT_FLAG_CKM = RCU_REGIDX_BIT(INT_REG_OFFSET, 7U), /*!< HXTAL clock stuck interrupt flag */ +}rcu_int_flag_enum; + +/* clock stabilization and stuck interrupt flags clear */ +typedef enum +{ + RCU_INT_FLAG_IRC40KSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 16U), /*!< IRC40K stabilization interrupt flags clear */ + RCU_INT_FLAG_LXTALSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 17U), /*!< LXTAL stabilization interrupt flags clear */ + RCU_INT_FLAG_IRC8MSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 18U), /*!< IRC8M stabilization interrupt flags clear */ + RCU_INT_FLAG_HXTALSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 19U), /*!< HXTAL stabilization interrupt flags clear */ + RCU_INT_FLAG_PLLSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 20U), /*!< PLL stabilization interrupt flags clear */ +#ifdef GD32F10X_CL + RCU_INT_FLAG_PLL1STB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 21U), /*!< PLL1 stabilization interrupt flags clear */ + RCU_INT_FLAG_PLL2STB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 22U), /*!< PLL2 stabilization interrupt flags clear */ +#endif /* GD32F10X_CL */ + RCU_INT_FLAG_CKM_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 23U), /*!< CKM interrupt flags clear */ +}rcu_int_flag_clear_enum; + +/* clock stabilization interrupt enable or disable */ +typedef enum +{ + RCU_INT_IRC40KSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 8U), /*!< IRC40K stabilization interrupt */ + RCU_INT_LXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 9U), /*!< LXTAL stabilization interrupt */ + RCU_INT_IRC8MSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 10U), /*!< IRC8M stabilization interrupt */ + RCU_INT_HXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 11U), /*!< HXTAL stabilization interrupt */ + RCU_INT_PLLSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 12U), /*!< PLL stabilization interrupt */ +#ifdef GD32F10X_CL + RCU_INT_PLL1STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 13U), /*!< PLL1 stabilization interrupt */ + RCU_INT_PLL2STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 14U), /*!< PLL2 stabilization interrupt */ +#endif /* GD32F10X_CL */ +}rcu_int_enum; + +/* oscillator types */ +typedef enum +{ + RCU_HXTAL = RCU_REGIDX_BIT(CTL_REG_OFFSET, 16U), /*!< HXTAL */ + RCU_LXTAL = RCU_REGIDX_BIT(BDCTL_REG_OFFSET, 0U), /*!< LXTAL */ + RCU_IRC8M = RCU_REGIDX_BIT(CTL_REG_OFFSET, 0U), /*!< IRC8M */ + RCU_IRC40K = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 0U), /*!< IRC40K */ + RCU_PLL_CK = RCU_REGIDX_BIT(CTL_REG_OFFSET, 24U), /*!< PLL */ +#ifdef GD32F10X_CL + RCU_PLL1_CK = RCU_REGIDX_BIT(CTL_REG_OFFSET, 26U), /*!< PLL1 */ + RCU_PLL2_CK = RCU_REGIDX_BIT(CTL_REG_OFFSET, 28U), /*!< PLL2 */ +#endif /* GD32F10X_CL */ +}rcu_osci_type_enum; + +/* rcu clock frequency */ +typedef enum +{ + CK_SYS = 0, /*!< system clock */ + CK_AHB, /*!< AHB clock */ + CK_APB1, /*!< APB1 clock */ + CK_APB2, /*!< APB2 clock */ +}rcu_clock_freq_enum; + +/* RCU_CFG0 register bit define */ +/* system clock source select */ +#define CFG0_SCS(regval) (BITS(0,1) & ((uint32_t)(regval) << 0)) +#define RCU_CKSYSSRC_IRC8M CFG0_SCS(0) /*!< system clock source select IRC8M */ +#define RCU_CKSYSSRC_HXTAL CFG0_SCS(1) /*!< system clock source select HXTAL */ +#define RCU_CKSYSSRC_PLL CFG0_SCS(2) /*!< system clock source select PLL */ + +/* system clock source select status */ +#define CFG0_SCSS(regval) (BITS(2,3) & ((uint32_t)(regval) << 2)) +#define RCU_SCSS_IRC8M CFG0_SCSS(0) /*!< system clock source select IRC8M */ +#define RCU_SCSS_HXTAL CFG0_SCSS(1) /*!< system clock source select HXTAL */ +#define RCU_SCSS_PLL CFG0_SCSS(2) /*!< system clock source select PLLP */ + +/* AHB prescaler selection */ +#define CFG0_AHBPSC(regval) (BITS(4,7) & ((uint32_t)(regval) << 4)) +#define RCU_AHB_CKSYS_DIV1 CFG0_AHBPSC(0) /*!< AHB prescaler select CK_SYS */ +#define RCU_AHB_CKSYS_DIV2 CFG0_AHBPSC(8) /*!< AHB prescaler select CK_SYS/2 */ +#define RCU_AHB_CKSYS_DIV4 CFG0_AHBPSC(9) /*!< AHB prescaler select CK_SYS/4 */ +#define RCU_AHB_CKSYS_DIV8 CFG0_AHBPSC(10) /*!< AHB prescaler select CK_SYS/8 */ +#define RCU_AHB_CKSYS_DIV16 CFG0_AHBPSC(11) /*!< AHB prescaler select CK_SYS/16 */ +#define RCU_AHB_CKSYS_DIV64 CFG0_AHBPSC(12) /*!< AHB prescaler select CK_SYS/64 */ +#define RCU_AHB_CKSYS_DIV128 CFG0_AHBPSC(13) /*!< AHB prescaler select CK_SYS/128 */ +#define RCU_AHB_CKSYS_DIV256 CFG0_AHBPSC(14) /*!< AHB prescaler select CK_SYS/256 */ +#define RCU_AHB_CKSYS_DIV512 CFG0_AHBPSC(15) /*!< AHB prescaler select CK_SYS/512 */ + +/* APB1 prescaler selection */ +#define CFG0_APB1PSC(regval) (BITS(8,10) & ((uint32_t)(regval) << 8)) +#define RCU_APB1_CKAHB_DIV1 CFG0_APB1PSC(0) /*!< APB1 prescaler select CK_AHB */ +#define RCU_APB1_CKAHB_DIV2 CFG0_APB1PSC(4) /*!< APB1 prescaler select CK_AHB/2 */ +#define RCU_APB1_CKAHB_DIV4 CFG0_APB1PSC(5) /*!< APB1 prescaler select CK_AHB/4 */ +#define RCU_APB1_CKAHB_DIV8 CFG0_APB1PSC(6) /*!< APB1 prescaler select CK_AHB/8 */ +#define RCU_APB1_CKAHB_DIV16 CFG0_APB1PSC(7) /*!< APB1 prescaler select CK_AHB/16 */ + +/* APB2 prescaler selection */ +#define CFG0_APB2PSC(regval) (BITS(11,13) & ((uint32_t)(regval) << 11)) +#define RCU_APB2_CKAHB_DIV1 CFG0_APB2PSC(0) /*!< APB2 prescaler select CK_AHB */ +#define RCU_APB2_CKAHB_DIV2 CFG0_APB2PSC(4) /*!< APB2 prescaler select CK_AHB/2 */ +#define RCU_APB2_CKAHB_DIV4 CFG0_APB2PSC(5) /*!< APB2 prescaler select CK_AHB/4 */ +#define RCU_APB2_CKAHB_DIV8 CFG0_APB2PSC(6) /*!< APB2 prescaler select CK_AHB/8 */ +#define RCU_APB2_CKAHB_DIV16 CFG0_APB2PSC(7) /*!< APB2 prescaler select CK_AHB/16 */ + +/* ADC prescaler select */ +#define RCU_CKADC_CKAPB2_DIV2 ((uint32_t)0x00000000U) /*!< ADC prescaler select CK_APB2/2 */ +#define RCU_CKADC_CKAPB2_DIV4 ((uint32_t)0x00000001U) /*!< ADC prescaler select CK_APB2/4 */ +#define RCU_CKADC_CKAPB2_DIV6 ((uint32_t)0x00000002U) /*!< ADC prescaler select CK_APB2/6 */ +#define RCU_CKADC_CKAPB2_DIV8 ((uint32_t)0x00000003U) /*!< ADC prescaler select CK_APB2/8 */ +#define RCU_CKADC_CKAPB2_DIV12 ((uint32_t)0x00000005U) /*!< ADC prescaler select CK_APB2/12 */ +#define RCU_CKADC_CKAPB2_DIV16 ((uint32_t)0x00000007U) /*!< ADC prescaler select CK_APB2/16 */ + +/* PLL clock source selection */ +#define RCU_PLLSRC_IRC8M_DIV2 ((uint32_t)0x00000000U) /*!< IRC8M/2 clock selected as source clock of PLL */ +#define RCU_PLLSRC_HXTAL RCU_CFG0_PLLSEL /*!< HXTAL clock selected as source clock of PLL */ + +/* PLL clock multiplication factor */ +#define PLLMF_4 RCU_CFG0_PLLMF_4 /* bit 4 of PLLMF */ + +#define CFG0_PLLMF(regval) (BITS(18,21) & ((uint32_t)(regval) << 18)) +#define RCU_PLL_MUL2 CFG0_PLLMF(0) /*!< PLL source clock multiply by 2 */ +#define RCU_PLL_MUL3 CFG0_PLLMF(1) /*!< PLL source clock multiply by 3 */ +#define RCU_PLL_MUL4 CFG0_PLLMF(2) /*!< PLL source clock multiply by 4 */ +#define RCU_PLL_MUL5 CFG0_PLLMF(3) /*!< PLL source clock multiply by 5 */ +#define RCU_PLL_MUL6 CFG0_PLLMF(4) /*!< PLL source clock multiply by 6 */ +#define RCU_PLL_MUL7 CFG0_PLLMF(5) /*!< PLL source clock multiply by 7 */ +#define RCU_PLL_MUL8 CFG0_PLLMF(6) /*!< PLL source clock multiply by 8 */ +#define RCU_PLL_MUL9 CFG0_PLLMF(7) /*!< PLL source clock multiply by 9 */ +#define RCU_PLL_MUL10 CFG0_PLLMF(8) /*!< PLL source clock multiply by 10 */ +#define RCU_PLL_MUL11 CFG0_PLLMF(9) /*!< PLL source clock multiply by 11 */ +#define RCU_PLL_MUL12 CFG0_PLLMF(10) /*!< PLL source clock multiply by 12 */ +#define RCU_PLL_MUL13 CFG0_PLLMF(11) /*!< PLL source clock multiply by 13 */ +#define RCU_PLL_MUL14 CFG0_PLLMF(12) /*!< PLL source clock multiply by 14 */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +#define RCU_PLL_MUL15 CFG0_PLLMF(13) /*!< PLL source clock multiply by 15 */ +#elif defined(GD32F10X_CL) +#define RCU_PLL_MUL6_5 CFG0_PLLMF(13) /*!< PLL source clock multiply by 6.5 */ +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ +#define RCU_PLL_MUL16 CFG0_PLLMF(14) /*!< PLL source clock multiply by 16 */ +#define RCU_PLL_MUL17 (PLLMF_4 | CFG0_PLLMF(0)) /*!< PLL source clock multiply by 17 */ +#define RCU_PLL_MUL18 (PLLMF_4 | CFG0_PLLMF(1)) /*!< PLL source clock multiply by 18 */ +#define RCU_PLL_MUL19 (PLLMF_4 | CFG0_PLLMF(2)) /*!< PLL source clock multiply by 19 */ +#define RCU_PLL_MUL20 (PLLMF_4 | CFG0_PLLMF(3)) /*!< PLL source clock multiply by 20 */ +#define RCU_PLL_MUL21 (PLLMF_4 | CFG0_PLLMF(4)) /*!< PLL source clock multiply by 21 */ +#define RCU_PLL_MUL22 (PLLMF_4 | CFG0_PLLMF(5)) /*!< PLL source clock multiply by 22 */ +#define RCU_PLL_MUL23 (PLLMF_4 | CFG0_PLLMF(6)) /*!< PLL source clock multiply by 23 */ +#define RCU_PLL_MUL24 (PLLMF_4 | CFG0_PLLMF(7)) /*!< PLL source clock multiply by 24 */ +#define RCU_PLL_MUL25 (PLLMF_4 | CFG0_PLLMF(8)) /*!< PLL source clock multiply by 25 */ +#define RCU_PLL_MUL26 (PLLMF_4 | CFG0_PLLMF(9)) /*!< PLL source clock multiply by 26 */ +#define RCU_PLL_MUL27 (PLLMF_4 | CFG0_PLLMF(10)) /*!< PLL source clock multiply by 27 */ +#define RCU_PLL_MUL28 (PLLMF_4 | CFG0_PLLMF(11)) /*!< PLL source clock multiply by 28 */ +#define RCU_PLL_MUL29 (PLLMF_4 | CFG0_PLLMF(12)) /*!< PLL source clock multiply by 29 */ +#define RCU_PLL_MUL30 (PLLMF_4 | CFG0_PLLMF(13)) /*!< PLL source clock multiply by 30 */ +#define RCU_PLL_MUL31 (PLLMF_4 | CFG0_PLLMF(14)) /*!< PLL source clock multiply by 31 */ +#define RCU_PLL_MUL32 (PLLMF_4 | CFG0_PLLMF(15)) /*!< PLL source clock multiply by 32 */ + +/* USBD/USBFS prescaler select */ +#define CFG0_USBPSC(regval) (BITS(22,23) & ((uint32_t)(regval) << 22)) +#define RCU_CKUSB_CKPLL_DIV1_5 CFG0_USBPSC(0) /*!< USBD/USBFS prescaler select CK_PLL/1.5 */ +#define RCU_CKUSB_CKPLL_DIV1 CFG0_USBPSC(1) /*!< USBD/USBFS prescaler select CK_PLL/1 */ +#define RCU_CKUSB_CKPLL_DIV2_5 CFG0_USBPSC(2) /*!< USBD/USBFS prescaler select CK_PLL/2.5 */ +#define RCU_CKUSB_CKPLL_DIV2 CFG0_USBPSC(3) /*!< USBD/USBFS prescaler select CK_PLL/2 */ + +/* CKOUT0 clock source selection */ +#define CFG0_CKOUT0SEL(regval) (BITS(24,27) & ((uint32_t)(regval) << 24)) +#define RCU_CKOUT0SRC_NONE CFG0_CKOUT0SEL(0) /*!< no clock selected */ +#define RCU_CKOUT0SRC_CKSYS CFG0_CKOUT0SEL(4) /*!< system clock selected */ +#define RCU_CKOUT0SRC_IRC8M CFG0_CKOUT0SEL(5) /*!< internal 8M RC oscillator clock selected */ +#define RCU_CKOUT0SRC_HXTAL CFG0_CKOUT0SEL(6) /*!< high speed crystal oscillator clock (HXTAL) selected */ +#define RCU_CKOUT0SRC_CKPLL_DIV2 CFG0_CKOUT0SEL(7) /*!< CK_PLL/2 clock selected */ +#ifdef GD32F10X_CL +#define RCU_CKOUT0SRC_CKPLL1 CFG0_CKOUT0SEL(8) /*!< CK_PLL1 clock selected */ +#define RCU_CKOUT0SRC_CKPLL2_DIV2 CFG0_CKOUT0SEL(9) /*!< CK_PLL2/2 clock selected */ +#define RCU_CKOUT0SRC_EXT1 CFG0_CKOUT0SEL(10) /*!< EXT1 selected, to provide the external clock for ENET */ +#define RCU_CKOUT0SRC_CKPLL2 CFG0_CKOUT0SEL(11) /*!< CK_PLL2 clock selected */ +#endif /* GD32F10X_CL */ + +/* RTC clock entry selection */ +#define BDCTL_RTCSRC(regval) (BITS(8,9) & ((uint32_t)(regval) << 8)) +#define RCU_RTCSRC_NONE BDCTL_RTCSRC(0) /*!< no clock selected */ +#define RCU_RTCSRC_LXTAL BDCTL_RTCSRC(1) /*!< RTC source clock select LXTAL */ +#define RCU_RTCSRC_IRC40K BDCTL_RTCSRC(2) /*!< RTC source clock select IRC40K */ +#define RCU_RTCSRC_HXTAL_DIV_128 BDCTL_RTCSRC(3) /*!< RTC source clock select HXTAL/128 */ + +/* PREDV0 division factor */ +#define CFG1_PREDV0(regval) (BITS(0,3) & ((uint32_t)(regval) << 0)) +#define RCU_PREDV0_DIV1 CFG1_PREDV0(0) /*!< PREDV0 input source clock not divided */ +#define RCU_PREDV0_DIV2 CFG1_PREDV0(1) /*!< PREDV0 input source clock divided by 2 */ +#define RCU_PREDV0_DIV3 CFG1_PREDV0(2) /*!< PREDV0 input source clock divided by 3 */ +#define RCU_PREDV0_DIV4 CFG1_PREDV0(3) /*!< PREDV0 input source clock divided by 4 */ +#define RCU_PREDV0_DIV5 CFG1_PREDV0(4) /*!< PREDV0 input source clock divided by 5 */ +#define RCU_PREDV0_DIV6 CFG1_PREDV0(5) /*!< PREDV0 input source clock divided by 6 */ +#define RCU_PREDV0_DIV7 CFG1_PREDV0(6) /*!< PREDV0 input source clock divided by 7 */ +#define RCU_PREDV0_DIV8 CFG1_PREDV0(7) /*!< PREDV0 input source clock divided by 8 */ +#define RCU_PREDV0_DIV9 CFG1_PREDV0(8) /*!< PREDV0 input source clock divided by 9 */ +#define RCU_PREDV0_DIV10 CFG1_PREDV0(9) /*!< PREDV0 input source clock divided by 10 */ +#define RCU_PREDV0_DIV11 CFG1_PREDV0(10) /*!< PREDV0 input source clock divided by 11 */ +#define RCU_PREDV0_DIV12 CFG1_PREDV0(11) /*!< PREDV0 input source clock divided by 12 */ +#define RCU_PREDV0_DIV13 CFG1_PREDV0(12) /*!< PREDV0 input source clock divided by 13 */ +#define RCU_PREDV0_DIV14 CFG1_PREDV0(13) /*!< PREDV0 input source clock divided by 14 */ +#define RCU_PREDV0_DIV15 CFG1_PREDV0(14) /*!< PREDV0 input source clock divided by 15 */ +#define RCU_PREDV0_DIV16 CFG1_PREDV0(15) /*!< PREDV0 input source clock divided by 16 */ + +/* PREDV1 division factor */ +#define CFG1_PREDV1(regval) (BITS(4,7) & ((uint32_t)(regval) << 4)) +#define RCU_PREDV1_DIV1 CFG1_PREDV1(0) /*!< PREDV1 input source clock not divided */ +#define RCU_PREDV1_DIV2 CFG1_PREDV1(1) /*!< PREDV1 input source clock divided by 2 */ +#define RCU_PREDV1_DIV3 CFG1_PREDV1(2) /*!< PREDV1 input source clock divided by 3 */ +#define RCU_PREDV1_DIV4 CFG1_PREDV1(3) /*!< PREDV1 input source clock divided by 4 */ +#define RCU_PREDV1_DIV5 CFG1_PREDV1(4) /*!< PREDV1 input source clock divided by 5 */ +#define RCU_PREDV1_DIV6 CFG1_PREDV1(5) /*!< PREDV1 input source clock divided by 6 */ +#define RCU_PREDV1_DIV7 CFG1_PREDV1(6) /*!< PREDV1 input source clock divided by 7 */ +#define RCU_PREDV1_DIV8 CFG1_PREDV1(7) /*!< PREDV1 input source clock divided by 8 */ +#define RCU_PREDV1_DIV9 CFG1_PREDV1(8) /*!< PREDV1 input source clock divided by 9 */ +#define RCU_PREDV1_DIV10 CFG1_PREDV1(9) /*!< PREDV1 input source clock divided by 10 */ +#define RCU_PREDV1_DIV11 CFG1_PREDV1(10) /*!< PREDV1 input source clock divided by 11 */ +#define RCU_PREDV1_DIV12 CFG1_PREDV1(11) /*!< PREDV1 input source clock divided by 12 */ +#define RCU_PREDV1_DIV13 CFG1_PREDV1(12) /*!< PREDV1 input source clock divided by 13 */ +#define RCU_PREDV1_DIV14 CFG1_PREDV1(13) /*!< PREDV1 input source clock divided by 14 */ +#define RCU_PREDV1_DIV15 CFG1_PREDV1(14) /*!< PREDV1 input source clock divided by 15 */ +#define RCU_PREDV1_DIV16 CFG1_PREDV1(15) /*!< PREDV1 input source clock divided by 16 */ + +/* PLL1 clock multiplication factor */ +#define CFG1_PLL1MF(regval) (BITS(8,11) & ((uint32_t)(regval) << 8)) +#define RCU_PLL1_MUL8 CFG1_PLL1MF(6) /*!< PLL1 source clock multiply by 8 */ +#define RCU_PLL1_MUL9 CFG1_PLL1MF(7) /*!< PLL1 source clock multiply by 9 */ +#define RCU_PLL1_MUL10 CFG1_PLL1MF(8) /*!< PLL1 source clock multiply by 10 */ +#define RCU_PLL1_MUL11 CFG1_PLL1MF(9) /*!< PLL1 source clock multiply by 11 */ +#define RCU_PLL1_MUL12 CFG1_PLL1MF(10) /*!< PLL1 source clock multiply by 12 */ +#define RCU_PLL1_MUL13 CFG1_PLL1MF(11) /*!< PLL1 source clock multiply by 13 */ +#define RCU_PLL1_MUL14 CFG1_PLL1MF(12) /*!< PLL1 source clock multiply by 14 */ +#define RCU_PLL1_MUL15 CFG1_PLL1MF(13) /*!< PLL1 source clock multiply by 15 */ +#define RCU_PLL1_MUL16 CFG1_PLL1MF(14) /*!< PLL1 source clock multiply by 16 */ +#define RCU_PLL1_MUL20 CFG1_PLL1MF(15) /*!< PLL1 source clock multiply by 20 */ + +/* PLL2 clock multiplication factor */ +#define CFG1_PLL2MF(regval) (BITS(12,15) & ((uint32_t)(regval) << 12)) +#define RCU_PLL2_MUL8 CFG1_PLL2MF(6) /*!< PLL2 source clock multiply by 8 */ +#define RCU_PLL2_MUL9 CFG1_PLL2MF(7) /*!< PLL2 source clock multiply by 9 */ +#define RCU_PLL2_MUL10 CFG1_PLL2MF(8) /*!< PLL2 source clock multiply by 10 */ +#define RCU_PLL2_MUL11 CFG1_PLL2MF(9) /*!< PLL2 source clock multiply by 11 */ +#define RCU_PLL2_MUL12 CFG1_PLL2MF(10) /*!< PLL2 source clock multiply by 12 */ +#define RCU_PLL2_MUL13 CFG1_PLL2MF(11) /*!< PLL2 source clock multiply by 13 */ +#define RCU_PLL2_MUL14 CFG1_PLL2MF(12) /*!< PLL2 source clock multiply by 14 */ +#define RCU_PLL2_MUL15 CFG1_PLL2MF(13) /*!< PLL2 source clock multiply by 15 */ +#define RCU_PLL2_MUL16 CFG1_PLL2MF(14) /*!< PLL2 source clock multiply by 16 */ +#define RCU_PLL2_MUL20 CFG1_PLL2MF(15) /*!< PLL2 source clock multiply by 20 */ + +#ifdef GD32F10X_CL +/* PREDV0 input clock source selection */ +#define RCU_PREDV0SRC_HXTAL ((uint32_t)0x00000000U) /*!< HXTAL selected as PREDV0 input source clock */ +#define RCU_PREDV0SRC_CKPLL1 RCU_CFG1_PREDV0SEL /*!< CK_PLL1 selected as PREDV0 input source clock */ + +/* I2S1 clock source selection */ +#define RCU_I2S1SRC_CKSYS ((uint32_t)0x00000000U) /*!< system clock selected as I2S1 source clock */ +#define RCU_I2S1SRC_CKPLL2_MUL2 RCU_CFG1_I2S1SEL /*!< (CK_PLL2 x 2) selected as I2S1 source clock */ + +/* I2S2 clock source selection */ +#define RCU_I2S2SRC_CKSYS ((uint32_t)0x00000000U) /*!< system clock selected as I2S2 source clock */ +#define RCU_I2S2SRC_CKPLL2_MUL2 RCU_CFG1_I2S2SEL /*!< (CK_PLL2 x 2) selected as I2S2 source clock */ +#endif /* GD32F10X_CL */ + +/* deep-sleep mode voltage */ +#define DSV_DSLPVS(regval) (BITS(0,2) & ((uint32_t)(regval) << 0)) +#define RCU_DEEPSLEEP_V_1_2 DSV_DSLPVS(0) /*!< core voltage is 1.2V in deep-sleep mode */ +#define RCU_DEEPSLEEP_V_1_1 DSV_DSLPVS(1) /*!< core voltage is 1.1V in deep-sleep mode */ +#define RCU_DEEPSLEEP_V_1_0 DSV_DSLPVS(2) /*!< core voltage is 1.0V in deep-sleep mode */ +#define RCU_DEEPSLEEP_V_0_9 DSV_DSLPVS(3) /*!< core voltage is 0.9V in deep-sleep mode */ + +/* function declarations */ +/* initialization, peripheral clock enable/disable functions */ +/* deinitialize the RCU */ +void rcu_deinit(void); +/* enable the peripherals clock */ +void rcu_periph_clock_enable(rcu_periph_enum periph); +/* disable the peripherals clock */ +void rcu_periph_clock_disable(rcu_periph_enum periph); +/* enable the peripherals clock when sleep mode */ +void rcu_periph_clock_sleep_enable(rcu_periph_sleep_enum periph); +/* disable the peripherals clock when sleep mode */ +void rcu_periph_clock_sleep_disable(rcu_periph_sleep_enum periph); +/* reset the peripherals */ +void rcu_periph_reset_enable(rcu_periph_reset_enum periph_reset); +/* disable reset the peripheral */ +void rcu_periph_reset_disable(rcu_periph_reset_enum periph_reset); +/* reset the BKP domain */ +void rcu_bkp_reset_enable(void); +/* disable the BKP domain reset */ +void rcu_bkp_reset_disable(void); + +/* clock configuration functions */ +/* configure the system clock source */ +void rcu_system_clock_source_config(uint32_t ck_sys); +/* get the system clock source */ +uint32_t rcu_system_clock_source_get(void); +/* configure the AHB prescaler selection */ +void rcu_ahb_clock_config(uint32_t ck_ahb); +/* configure the APB1 prescaler selection */ +void rcu_apb1_clock_config(uint32_t ck_apb1); +/* configure the APB2 prescaler selection */ +void rcu_apb2_clock_config(uint32_t ck_apb2); +/* configure the CK_OUT0 clock source and divider */ +void rcu_ckout0_config(uint32_t ckout0_src); +/* configure the PLL clock source selection and PLL multiply factor */ +void rcu_pll_config(uint32_t pll_src, uint32_t pll_mul); +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +/* configure the PREDV0 division factor and clock source */ +void rcu_predv0_config(uint32_t predv0_div); +#elif defined(GD32F10X_CL) +/* configure the PREDV0 division factor and clock source */ +void rcu_predv0_config(uint32_t predv0_source, uint32_t predv0_div); +/* configure the PREDV1 division factor */ +void rcu_predv1_config(uint32_t predv1_div); +/* configure the PLL1 clock */ +void rcu_pll1_config(uint32_t pll_mul); +/* configure the PLL2 clock */ +void rcu_pll2_config(uint32_t pll_mul); +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + +/* peripheral clock configuration functions */ +/* configure the ADC division factor */ +void rcu_adc_clock_config(uint32_t adc_psc); +/* configure the USBD/USBFS prescaler factor */ +void rcu_usb_clock_config(uint32_t usb_psc); +/* configure the RTC clock source selection */ +void rcu_rtc_clock_config(uint32_t rtc_clock_source); +#ifdef GD32F10X_CL +/* configure the I2S1 clock source selection */ +void rcu_i2s1_clock_config(uint32_t i2s_clock_source); +/* configure the I2S2 clock source selection */ +void rcu_i2s2_clock_config(uint32_t i2s_clock_source); +#endif /* GD32F10X_CL */ + +/* interrupt & flag functions */ +/* get the clock stabilization and periphral reset flags */ +FlagStatus rcu_flag_get(rcu_flag_enum flag); +/* clear the reset flag */ +void rcu_all_reset_flag_clear(void); +/* get the clock stabilization interrupt and ckm flags */ +FlagStatus rcu_interrupt_flag_get(rcu_int_flag_enum int_flag); +/* clear the interrupt flags */ +void rcu_interrupt_flag_clear(rcu_int_flag_clear_enum int_flag_clear); +/* enable the stabilization interrupt */ +void rcu_interrupt_enable(rcu_int_enum stab_int); +/* disable the stabilization interrupt */ +void rcu_interrupt_disable(rcu_int_enum stab_int); + +/* oscillator configuration functions */ +/* wait for oscillator stabilization flags is SET or oscillator startup is timeout */ +ErrStatus rcu_osci_stab_wait(rcu_osci_type_enum osci); +/* turn on the oscillator */ +void rcu_osci_on(rcu_osci_type_enum osci); +/* turn off the oscillator */ +void rcu_osci_off(rcu_osci_type_enum osci); +/* enable the oscillator bypass mode, HXTALEN or LXTALEN must be reset before it */ +void rcu_osci_bypass_mode_enable(rcu_osci_type_enum osci); +/* disable the oscillator bypass mode, HXTALEN or LXTALEN must be reset before it */ +void rcu_osci_bypass_mode_disable(rcu_osci_type_enum osci); +/* enable the HXTAL clock monitor */ +void rcu_hxtal_clock_monitor_enable(void); +/* disable the HXTAL clock monitor */ +void rcu_hxtal_clock_monitor_disable(void); + +/* set the IRC8M adjust value */ +void rcu_irc8m_adjust_value_set(uint32_t irc8m_adjval); +/* set the deep sleep mode voltage */ +void rcu_deepsleep_voltage_set(uint32_t dsvol); + +/* get the system clock, bus and peripheral clock frequency */ +uint32_t rcu_clock_freq_get(rcu_clock_freq_enum clock); + +#endif /* GD32F10X_RCU_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_rtc.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_rtc.h new file mode 100644 index 0000000000000000000000000000000000000000..580617014f23b1a7bc146bded9a4be7b1ecb2609 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_rtc.h @@ -0,0 +1,152 @@ +/*! + \file gd32f10x_rtc.h + \brief definitions for the RTC + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_RTC_H +#define GD32F10X_RTC_H + +#include "gd32f10x.h" + +/* RTC definitions */ +#define RTC RTC_BASE + +/* registers definitions */ +#define RTC_INTEN REG32(RTC + 0x00U) /*!< interrupt enable register */ +#define RTC_CTL REG32(RTC + 0x04U) /*!< control register */ +#define RTC_PSCH REG32(RTC + 0x08U) /*!< prescaler high register */ +#define RTC_PSCL REG32(RTC + 0x0CU) /*!< prescaler low register */ +#define RTC_DIVH REG32(RTC + 0x10U) /*!< divider high register */ +#define RTC_DIVL REG32(RTC + 0x14U) /*!< divider low register */ +#define RTC_CNTH REG32(RTC + 0x18U) /*!< counter high register */ +#define RTC_CNTL REG32(RTC + 0x1CU) /*!< counter low register */ +#define RTC_ALRMH REG32(RTC + 0x20U) /*!< alarm high register */ +#define RTC_ALRML REG32(RTC + 0x24U) /*!< alarm low register */ + +/* bits definitions */ +/* RTC_INTEN */ +#define RTC_INTEN_SCIE BIT(0) /*!< second interrupt enable */ +#define RTC_INTEN_ALRMIE BIT(1) /*!< alarm interrupt enable */ +#define RTC_INTEN_OVIE BIT(2) /*!< overflow interrupt enable */ + +/* RTC_CTL */ +#define RTC_CTL_SCIF BIT(0) /*!< second interrupt flag */ +#define RTC_CTL_ALRMIF BIT(1) /*!< alarm interrupt flag */ +#define RTC_CTL_OVIF BIT(2) /*!< overflow interrupt flag */ +#define RTC_CTL_RSYNF BIT(3) /*!< registers synchronized flag */ +#define RTC_CTL_CMF BIT(4) /*!< configuration mode flag */ +#define RTC_CTL_LWOFF BIT(5) /*!< last write operation finished flag */ + +/* RTC_PSCH */ +#define RTC_PSCH_PSC BITS(0,3) /*!< prescaler high value */ + +/* RTC_PSCL */ +#define RTC_PSCL_PSC BITS(0,15) /*!< prescaler low value */ + +/* RTC_DIVH */ +#define RTC_DIVH_DIV BITS(0,3) /*!< divider high value */ + +/* RTC_DIVL */ +#define RTC_DIVL_DIV BITS(0,15) /*!< divider low value */ + +/* RTC_CNTH */ +#define RTC_CNTH_CNT BITS(0,15) /*!< counter high value */ + +/* RTC_CNTL */ +#define RTC_CNTL_CNT BITS(0,15) /*!< counter low value */ + +/* RTC_ALRMH */ +#define RTC_ALRMH_ALRM BITS(0,15) /*!< alarm high value */ + +/* RTC_ALRML */ +#define RTC_ALRML_ALRM BITS(0,15) /*!< alarm low value */ + +/* constants definitions */ +/* RTC interrupt enable or disable definitions */ +#define RTC_INT_SECOND RTC_INTEN_SCIE /*!< second interrupt enable */ +#define RTC_INT_ALARM RTC_INTEN_ALRMIE /*!< alarm interrupt enable */ +#define RTC_INT_OVERFLOW RTC_INTEN_OVIE /*!< overflow interrupt enable */ + +/* RTC interrupt flag definitions */ +#define RTC_INT_FLAG_SECOND RTC_CTL_SCIF /*!< second interrupt flag */ +#define RTC_INT_FLAG_ALARM RTC_CTL_ALRMIF /*!< alarm interrupt flag */ +#define RTC_INT_FLAG_OVERFLOW RTC_CTL_OVIF /*!< overflow interrupt flag */ + +/* RTC flag definitions */ +#define RTC_FLAG_SECOND RTC_CTL_SCIF /*!< second interrupt flag */ +#define RTC_FLAG_ALARM RTC_CTL_ALRMIF /*!< alarm interrupt flag */ +#define RTC_FLAG_OVERFLOW RTC_CTL_OVIF /*!< overflow interrupt flag */ +#define RTC_FLAG_RSYN RTC_CTL_RSYNF /*!< registers synchronized flag */ +#define RTC_FLAG_LWOF RTC_CTL_LWOFF /*!< last write operation finished flag */ + +/* function declarations */ +/* initialization functions */ +/* enter RTC configuration mode */ +void rtc_configuration_mode_enter(void); +/* exit RTC configuration mode */ +void rtc_configuration_mode_exit(void); +/* set RTC counter value */ +void rtc_counter_set(uint32_t cnt); +/* set RTC prescaler value */ +void rtc_prescaler_set(uint32_t psc); + +/* operation functions */ +/* wait RTC last write operation finished flag set */ +void rtc_lwoff_wait(void); +/* wait RTC registers synchronized flag set */ +void rtc_register_sync_wait(void); +/* set RTC alarm value */ +void rtc_alarm_config(uint32_t alarm); +/* get RTC counter value */ +uint32_t rtc_counter_get(void); +/* get RTC divider value */ +uint32_t rtc_divider_get(void); + +/* flag & interrupt functions */ +/* get RTC flag status */ +FlagStatus rtc_flag_get(uint32_t flag); +/* clear RTC flag status */ +void rtc_flag_clear(uint32_t flag); +/* get RTC interrupt flag status */ +FlagStatus rtc_interrupt_flag_get(uint32_t flag); +/* clear RTC interrupt flag status */ +void rtc_interrupt_flag_clear(uint32_t flag); +/* enable RTC interrupt */ +void rtc_interrupt_enable(uint32_t interrupt); +/* disable RTC interrupt */ +void rtc_interrupt_disable(uint32_t interrupt); + +#endif /* GD32F10X_RTC_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_sdio.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_sdio.h new file mode 100644 index 0000000000000000000000000000000000000000..c905e102001a8e3823b5bcc3ecb4594aa93b2404 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_sdio.h @@ -0,0 +1,430 @@ +/*! + \file gd32f10x_sdio.h + \brief definitions for the SDIO + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_SDIO_H +#define GD32F10X_SDIO_H + +#include "gd32f10x.h" + +/* SDIO definitions */ +#define SDIO SDIO_BASE + +/* registers definitions */ +#define SDIO_PWRCTL REG32(SDIO + 0x00U) /*!< SDIO power control register */ +#define SDIO_CLKCTL REG32(SDIO + 0x04U) /*!< SDIO clock control register */ +#define SDIO_CMDAGMT REG32(SDIO + 0x08U) /*!< SDIO command argument register */ +#define SDIO_CMDCTL REG32(SDIO + 0x0CU) /*!< SDIO command control register */ +#define SDIO_RSPCMDIDX REG32(SDIO + 0x10U) /*!< SDIO command index response register */ +#define SDIO_RESP0 REG32(SDIO + 0x14U) /*!< SDIO response register 0 */ +#define SDIO_RESP1 REG32(SDIO + 0x18U) /*!< SDIO response register 1 */ +#define SDIO_RESP2 REG32(SDIO + 0x1CU) /*!< SDIO response register 2 */ +#define SDIO_RESP3 REG32(SDIO + 0x20U) /*!< SDIO response register 3 */ +#define SDIO_DATATO REG32(SDIO + 0x24U) /*!< SDIO data timeout register */ +#define SDIO_DATALEN REG32(SDIO + 0x28U) /*!< SDIO data length register */ +#define SDIO_DATACTL REG32(SDIO + 0x2CU) /*!< SDIO data control register */ +#define SDIO_DATACNT REG32(SDIO + 0x30U) /*!< SDIO data counter register */ +#define SDIO_STAT REG32(SDIO + 0x34U) /*!< SDIO status register */ +#define SDIO_INTC REG32(SDIO + 0x38U) /*!< SDIO interrupt clear register */ +#define SDIO_INTEN REG32(SDIO + 0x3CU) /*!< SDIO interrupt enable register */ +#define SDIO_FIFOCNT REG32(SDIO + 0x48U) /*!< SDIO FIFO counter register */ +#define SDIO_FIFO REG32(SDIO + 0x80U) /*!< SDIO FIFO data register */ + +/* bits definitions */ +/* SDIO_PWRCTL */ +#define SDIO_PWRCTL_PWRCTL BITS(0,1) /*!< SDIO power control bits */ + +/* SDIO_CLKCTL */ +#define SDIO_CLKCTL_DIV BITS(0,7) /*!< clock division */ +#define SDIO_CLKCTL_CLKEN BIT(8) /*!< SDIO_CLK clock output enable bit */ +#define SDIO_CLKCTL_CLKPWRSAV BIT(9) /*!< SDIO_CLK clock dynamic switch on/off for power saving */ +#define SDIO_CLKCTL_CLKBYP BIT(10) /*!< clock bypass enable bit */ +#define SDIO_CLKCTL_BUSMODE BITS(11,12) /*!< SDIO card bus mode control bit */ +#define SDIO_CLKCTL_CLKEDGE BIT(13) /*!< SDIO_CLK clock edge selection bit */ +#define SDIO_CLKCTL_HWCLKEN BIT(14) /*!< hardware clock control enable bit */ + +/* SDIO_CMDAGMT */ +#define SDIO_CMDAGMT_CMDAGMT BITS(0,31) /*!< SDIO card command argument */ + +/* SDIO_CMDCTL */ +#define SDIO_CMDCTL_CMDIDX BITS(0,5) /*!< command index */ +#define SDIO_CMDCTL_CMDRESP BITS(6,7) /*!< command response type bits */ +#define SDIO_CMDCTL_INTWAIT BIT(8) /*!< interrupt wait instead of timeout */ +#define SDIO_CMDCTL_WAITDEND BIT(9) /*!< wait for ends of data transfer */ +#define SDIO_CMDCTL_CSMEN BIT(10) /*!< command state machine(CSM) enable bit */ +#define SDIO_CMDCTL_SUSPEND BIT(11) /*!< SD I/O suspend command(SD I/O only) */ +#define SDIO_CMDCTL_ENCMDC BIT(12) /*!< CMD completion signal enabled (CE-ATA only) */ +#define SDIO_CMDCTL_NINTEN BIT(13) /*!< no CE-ATA interrupt (CE-ATA only) */ +#define SDIO_CMDCTL_ATAEN BIT(14) /*!< CE-ATA command enable(CE-ATA only) */ + +/* SDIO_DATATO */ +#define SDIO_DATATO_DATATO BITS(0,31) /*!< data timeout period */ + +/* SDIO_DATALEN */ +#define SDIO_DATALEN_DATALEN BITS(0,24) /*!< data transfer length */ + +/* SDIO_DATACTL */ +#define SDIO_DATACTL_DATAEN BIT(0) /*!< data transfer enabled bit */ +#define SDIO_DATACTL_DATADIR BIT(1) /*!< data transfer direction */ +#define SDIO_DATACTL_TRANSMOD BIT(2) /*!< data transfer mode */ +#define SDIO_DATACTL_DMAEN BIT(3) /*!< DMA enable bit */ +#define SDIO_DATACTL_BLKSZ BITS(4,7) /*!< data block size */ +#define SDIO_DATACTL_RWEN BIT(8) /*!< read wait mode enabled(SD I/O only) */ +#define SDIO_DATACTL_RWSTOP BIT(9) /*!< read wait stop(SD I/O only) */ +#define SDIO_DATACTL_RWTYPE BIT(10) /*!< read wait type(SD I/O only) */ +#define SDIO_DATACTL_IOEN BIT(11) /*!< SD I/O specific function enable(SD I/O only) */ + +/* SDIO_STAT */ +#define SDIO_STAT_CCRCERR BIT(0) /*!< command response received (CRC check failed) */ +#define SDIO_STAT_DTCRCERR BIT(1) /*!< data block sent/received (CRC check failed) */ +#define SDIO_STAT_CMDTMOUT BIT(2) /*!< command response timeout */ +#define SDIO_STAT_DTTMOUT BIT(3) /*!< data timeout */ +#define SDIO_STAT_TXURE BIT(4) /*!< transmit FIFO underrun error occurs */ +#define SDIO_STAT_RXORE BIT(5) /*!< received FIFO overrun error occurs */ +#define SDIO_STAT_CMDRECV BIT(6) /*!< command response received (CRC check passed) */ +#define SDIO_STAT_CMDSEND BIT(7) /*!< command sent (no response required) */ +#define SDIO_STAT_DTEND BIT(8) /*!< data end (data counter, SDIO_DATACNT, is zero) */ +#define SDIO_STAT_STBITE BIT(9) /*!< start bit error in the bus */ +#define SDIO_STAT_DTBLKEND BIT(10) /*!< data block sent/received (CRC check passed) */ +#define SDIO_STAT_CMDRUN BIT(11) /*!< command transmission in progress */ +#define SDIO_STAT_TXRUN BIT(12) /*!< data transmission in progress */ +#define SDIO_STAT_RXRUN BIT(13) /*!< data reception in progress */ +#define SDIO_STAT_TFH BIT(14) /*!< transmit FIFO is half empty: at least 8 words can be written into the FIFO */ +#define SDIO_STAT_RFH BIT(15) /*!< receive FIFO is half full: at least 8 words can be read in the FIFO */ +#define SDIO_STAT_TFF BIT(16) /*!< transmit FIFO is full */ +#define SDIO_STAT_RFF BIT(17) /*!< receive FIFO is full */ +#define SDIO_STAT_TFE BIT(18) /*!< transmit FIFO is empty */ +#define SDIO_STAT_RFE BIT(19) /*!< receive FIFO is empty */ +#define SDIO_STAT_TXDTVAL BIT(20) /*!< data is valid in transmit FIFO */ +#define SDIO_STAT_RXDTVAL BIT(21) /*!< data is valid in receive FIFO */ +#define SDIO_STAT_SDIOINT BIT(22) /*!< SD I/O interrupt received */ +#define SDIO_STAT_ATAEND BIT(23) /*!< CE-ATA command completion signal received (only for CMD61) */ + +/* SDIO_INTC */ +#define SDIO_INTC_CCRCERRC BIT(0) /*!< CCRCERR flag clear bit */ +#define SDIO_INTC_DTCRCERRC BIT(1) /*!< DTCRCERR flag clear bit */ +#define SDIO_INTC_CMDTMOUTC BIT(2) /*!< CMDTMOUT flag clear bit */ +#define SDIO_INTC_DTTMOUTC BIT(3) /*!< DTTMOUT flag clear bit */ +#define SDIO_INTC_TXUREC BIT(4) /*!< TXURE flag clear bit */ +#define SDIO_INTC_RXOREC BIT(5) /*!< RXORE flag clear bit */ +#define SDIO_INTC_CMDRECVC BIT(6) /*!< CMDRECV flag clear bit */ +#define SDIO_INTC_CMDSENDC BIT(7) /*!< CMDSEND flag clear bit */ +#define SDIO_INTC_DTENDC BIT(8) /*!< DTEND flag clear bit */ +#define SDIO_INTC_STBITEC BIT(9) /*!< STBITE flag clear bit */ +#define SDIO_INTC_DTBLKENDC BIT(10) /*!< DTBLKEND flag clear bit */ +#define SDIO_INTC_SDIOINTC BIT(22) /*!< SDIOINT flag clear bit */ +#define SDIO_INTC_ATAENDC BIT(23) /*!< ATAEND flag clear bit */ + +/* SDIO_INTEN */ +#define SDIO_INTEN_CCRCERRIE BIT(0) /*!< command response CRC fail interrupt enable */ +#define SDIO_INTEN_DTCRCERRIE BIT(1) /*!< data CRC fail interrupt enable */ +#define SDIO_INTEN_CMDTMOUTIE BIT(2) /*!< command response timeout interrupt enable */ +#define SDIO_INTEN_DTTMOUTIE BIT(3) /*!< data timeout interrupt enable */ +#define SDIO_INTEN_TXUREIE BIT(4) /*!< transmit FIFO underrun error interrupt enable */ +#define SDIO_INTEN_RXOREIE BIT(5) /*!< received FIFO overrun error interrupt enable */ +#define SDIO_INTEN_CMDRECVIE BIT(6) /*!< command response received interrupt enable */ +#define SDIO_INTEN_CMDSENDIE BIT(7) /*!< command sent interrupt enable */ +#define SDIO_INTEN_DTENDIE BIT(8) /*!< data end interrupt enable */ +#define SDIO_INTEN_STBITEIE BIT(9) /*!< start bit error interrupt enable */ +#define SDIO_INTEN_DTBLKENDIE BIT(10) /*!< data block end interrupt enable */ +#define SDIO_INTEN_CMDRUNIE BIT(11) /*!< command transmission interrupt enable */ +#define SDIO_INTEN_TXRUNIE BIT(12) /*!< data transmission interrupt enable */ +#define SDIO_INTEN_RXRUNIE BIT(13) /*!< data reception interrupt enable */ +#define SDIO_INTEN_TFHIE BIT(14) /*!< transmit FIFO half empty interrupt enable */ +#define SDIO_INTEN_RFHIE BIT(15) /*!< receive FIFO half full interrupt enable */ +#define SDIO_INTEN_TFFIE BIT(16) /*!< transmit FIFO full interrupt enable */ +#define SDIO_INTEN_RFFIE BIT(17) /*!< receive FIFO full interrupt enable */ +#define SDIO_INTEN_TFEIE BIT(18) /*!< transmit FIFO empty interrupt enable */ +#define SDIO_INTEN_RFEIE BIT(19) /*!< receive FIFO empty interrupt enable */ +#define SDIO_INTEN_TXDTVALIE BIT(20) /*!< data valid in transmit FIFO interrupt enable */ +#define SDIO_INTEN_RXDTVALIE BIT(21) /*!< data valid in receive FIFO interrupt enable */ +#define SDIO_INTEN_SDIOINTIE BIT(22) /*!< SD I/O interrupt received interrupt enable */ +#define SDIO_INTEN_ATAENDIE BIT(23) /*!< CE-ATA command completion signal received interrupt enable */ + +/* SDIO_FIFO */ +#define SDIO_FIFO_FIFODT BITS(0,31) /*!< receive FIFO data or transmit FIFO data */ + +/* constants definitions */ +/* SDIO flags */ +#define SDIO_FLAG_CCRCERR BIT(0) /*!< command response received (CRC check failed) flag */ +#define SDIO_FLAG_DTCRCERR BIT(1) /*!< data block sent/received (CRC check failed) flag */ +#define SDIO_FLAG_CMDTMOUT BIT(2) /*!< command response timeout flag */ +#define SDIO_FLAG_DTTMOUT BIT(3) /*!< data timeout flag */ +#define SDIO_FLAG_TXURE BIT(4) /*!< transmit FIFO underrun error occurs flag */ +#define SDIO_FLAG_RXORE BIT(5) /*!< received FIFO overrun error occurs flag */ +#define SDIO_FLAG_CMDRECV BIT(6) /*!< command response received (CRC check passed) flag */ +#define SDIO_FLAG_CMDSEND BIT(7) /*!< command sent (no response required) flag */ +#define SDIO_FLAG_DTEND BIT(8) /*!< data end (data counter, SDIO_DATACNT, is zero) flag */ +#define SDIO_FLAG_STBITE BIT(9) /*!< start bit error in the bus flag */ +#define SDIO_FLAG_DTBLKEND BIT(10) /*!< data block sent/received (CRC check passed) flag */ +#define SDIO_FLAG_CMDRUN BIT(11) /*!< command transmission in progress flag */ +#define SDIO_FLAG_TXRUN BIT(12) /*!< data transmission in progress flag */ +#define SDIO_FLAG_RXRUN BIT(13) /*!< data reception in progress flag */ +#define SDIO_FLAG_TFH BIT(14) /*!< transmit FIFO is half empty flag: at least 8 words can be written into the FIFO */ +#define SDIO_FLAG_RFH BIT(15) /*!< receive FIFO is half full flag: at least 8 words can be read in the FIFO */ +#define SDIO_FLAG_TFF BIT(16) /*!< transmit FIFO is full flag */ +#define SDIO_FLAG_RFF BIT(17) /*!< receive FIFO is full flag */ +#define SDIO_FLAG_TFE BIT(18) /*!< transmit FIFO is empty flag */ +#define SDIO_FLAG_RFE BIT(19) /*!< receive FIFO is empty flag */ +#define SDIO_FLAG_TXDTVAL BIT(20) /*!< data is valid in transmit FIFO flag */ +#define SDIO_FLAG_RXDTVAL BIT(21) /*!< data is valid in receive FIFO flag */ +#define SDIO_FLAG_SDIOINT BIT(22) /*!< SD I/O interrupt received flag */ +#define SDIO_FLAG_ATAEND BIT(23) /*!< CE-ATA command completion signal received (only for CMD61) flag */ + +/* SDIO interrupt enable or disable */ +#define SDIO_INT_CCRCERR BIT(0) /*!< SDIO CCRCERR interrupt */ +#define SDIO_INT_DTCRCERR BIT(1) /*!< SDIO DTCRCERR interrupt */ +#define SDIO_INT_CMDTMOUT BIT(2) /*!< SDIO CMDTMOUT interrupt */ +#define SDIO_INT_DTTMOUT BIT(3) /*!< SDIO DTTMOUT interrupt */ +#define SDIO_INT_TXURE BIT(4) /*!< SDIO TXURE interrupt */ +#define SDIO_INT_RXORE BIT(5) /*!< SDIO RXORE interrupt */ +#define SDIO_INT_CMDRECV BIT(6) /*!< SDIO CMDRECV interrupt */ +#define SDIO_INT_CMDSEND BIT(7) /*!< SDIO CMDSEND interrupt */ +#define SDIO_INT_DTEND BIT(8) /*!< SDIO DTEND interrupt */ +#define SDIO_INT_STBITE BIT(9) /*!< SDIO STBITE interrupt */ +#define SDIO_INT_DTBLKEND BIT(10) /*!< SDIO DTBLKEND interrupt */ +#define SDIO_INT_CMDRUN BIT(11) /*!< SDIO CMDRUN interrupt */ +#define SDIO_INT_TXRUN BIT(12) /*!< SDIO TXRUN interrupt */ +#define SDIO_INT_RXRUN BIT(13) /*!< SDIO RXRUN interrupt */ +#define SDIO_INT_TFH BIT(14) /*!< SDIO TFH interrupt */ +#define SDIO_INT_RFH BIT(15) /*!< SDIO RFH interrupt */ +#define SDIO_INT_TFF BIT(16) /*!< SDIO TFF interrupt */ +#define SDIO_INT_RFF BIT(17) /*!< SDIO RFF interrupt */ +#define SDIO_INT_TFE BIT(18) /*!< SDIO TFE interrupt */ +#define SDIO_INT_RFE BIT(19) /*!< SDIO RFE interrupt */ +#define SDIO_INT_TXDTVAL BIT(20) /*!< SDIO TXDTVAL interrupt */ +#define SDIO_INT_RXDTVAL BIT(21) /*!< SDIO RXDTVAL interrupt */ +#define SDIO_INT_SDIOINT BIT(22) /*!< SDIO SDIOINT interrupt */ +#define SDIO_INT_ATAEND BIT(23) /*!< SDIO ATAEND interrupt */ + +/* SDIO interrupt flags */ +#define SDIO_INT_FLAG_CCRCERR BIT(0) /*!< SDIO CCRCERR interrupt */ +#define SDIO_INT_FLAG_DTCRCERR BIT(1) /*!< SDIO DTCRCERR interrupt */ +#define SDIO_INT_FLAG_CMDTMOUT BIT(2) /*!< SDIO CMDTMOUT interrupt */ +#define SDIO_INT_FLAG_DTTMOUT BIT(3) /*!< SDIO DTTMOUT interrupt */ +#define SDIO_INT_FLAG_TXURE BIT(4) /*!< SDIO TXURE interrupt */ +#define SDIO_INT_FLAG_RXORE BIT(5) /*!< SDIO RXORE interrupt */ +#define SDIO_INT_FLAG_CMDRECV BIT(6) /*!< SDIO CMDRECV interrupt */ +#define SDIO_INT_FLAG_CMDSEND BIT(7) /*!< SDIO CMDSEND interrupt */ +#define SDIO_INT_FLAG_DTEND BIT(8) /*!< SDIO DTEND interrupt */ +#define SDIO_INT_FLAG_STBITE BIT(9) /*!< SDIO STBITE interrupt */ +#define SDIO_INT_FLAG_DTBLKEND BIT(10) /*!< SDIO DTBLKEND interrupt */ +#define SDIO_INT_FLAG_CMDRUN BIT(11) /*!< SDIO CMDRUN interrupt */ +#define SDIO_INT_FLAG_TXRUN BIT(12) /*!< SDIO TXRUN interrupt */ +#define SDIO_INT_FLAG_RXRUN BIT(13) /*!< SDIO RXRUN interrupt */ +#define SDIO_INT_FLAG_TFH BIT(14) /*!< SDIO TFH interrupt */ +#define SDIO_INT_FLAG_RFH BIT(15) /*!< SDIO RFH interrupt */ +#define SDIO_INT_FLAG_TFF BIT(16) /*!< SDIO TFF interrupt */ +#define SDIO_INT_FLAG_RFF BIT(17) /*!< SDIO RFF interrupt */ +#define SDIO_INT_FLAG_TFE BIT(18) /*!< SDIO TFE interrupt */ +#define SDIO_INT_FLAG_RFE BIT(19) /*!< SDIO RFE interrupt */ +#define SDIO_INT_FLAG_TXDTVAL BIT(20) /*!< SDIO TXDTVAL interrupt */ +#define SDIO_INT_FLAG_RXDTVAL BIT(21) /*!< SDIO RXDTVAL interrupt */ +#define SDIO_INT_FLAG_SDIOINT BIT(22) /*!< SDIO SDIOINT interrupt */ +#define SDIO_INT_FLAG_ATAEND BIT(23) /*!< SDIO ATAEND interrupt */ + +/* SDIO power control */ +#define PWRCTL_PWRCTL(regval) (BITS(0,1) & ((uint32_t)(regval) << 0)) +#define SDIO_POWER_OFF PWRCTL_PWRCTL(0) /*!< SDIO power off */ +#define SDIO_POWER_ON PWRCTL_PWRCTL(3) /*!< SDIO power on */ + +/* SDIO card bus mode control */ +#define CLKCTL_BUSMODE(regval) (BITS(11,12) & ((uint32_t)(regval) << 11)) +#define SDIO_BUSMODE_1BIT CLKCTL_BUSMODE(0) /*!< 1-bit SDIO card bus mode */ +#define SDIO_BUSMODE_4BIT CLKCTL_BUSMODE(1) /*!< 4-bit SDIO card bus mode */ +#define SDIO_BUSMODE_8BIT CLKCTL_BUSMODE(2) /*!< 8-bit SDIO card bus mode */ + +/* SDIO_CLK clock edge selection */ +#define SDIO_SDIOCLKEDGE_RISING ((uint32_t)0x00000000U)/*!< select the rising edge of the SDIOCLK to generate SDIO_CLK */ +#define SDIO_SDIOCLKEDGE_FALLING SDIO_CLKCTL_CLKEDGE /*!< select the falling edge of the SDIOCLK to generate SDIO_CLK */ + +/* clock bypass enable or disable */ +#define SDIO_CLOCKBYPASS_DISABLE ((uint32_t)0x00000000U)/*!< no bypass */ +#define SDIO_CLOCKBYPASS_ENABLE SDIO_CLKCTL_CLKBYP /*!< clock bypass */ + +/* SDIO_CLK clock dynamic switch on/off for power saving */ +#define SDIO_CLOCKPWRSAVE_DISABLE ((uint32_t)0x00000000U)/*!< SDIO_CLK clock is always on */ +#define SDIO_CLOCKPWRSAVE_ENABLE SDIO_CLKCTL_CLKPWRSAV /*!< SDIO_CLK closed when bus is idle */ + +/* SDIO command response type */ +#define CMDCTL_CMDRESP(regval) (BITS(6,7) & ((uint32_t)(regval) << 6)) +#define SDIO_RESPONSETYPE_NO CMDCTL_CMDRESP(0) /*!< no response */ +#define SDIO_RESPONSETYPE_SHORT CMDCTL_CMDRESP(1) /*!< short response */ +#define SDIO_RESPONSETYPE_LONG CMDCTL_CMDRESP(3) /*!< long response */ + +/* command state machine wait type */ +#define SDIO_WAITTYPE_NO ((uint32_t)0x00000000U)/*!< not wait interrupt */ +#define SDIO_WAITTYPE_INTERRUPT SDIO_CMDCTL_INTWAIT /*!< wait interrupt */ +#define SDIO_WAITTYPE_DATAEND SDIO_CMDCTL_WAITDEND /*!< wait the end of data transfer */ + +#define SDIO_RESPONSE0 ((uint32_t)0x00000000U)/*!< card response[31:0]/card response[127:96] */ +#define SDIO_RESPONSE1 ((uint32_t)0x00000001U)/*!< card response[95:64] */ +#define SDIO_RESPONSE2 ((uint32_t)0x00000002U)/*!< card response[63:32] */ +#define SDIO_RESPONSE3 ((uint32_t)0x00000003U)/*!< card response[31:1], plus bit 0 */ + +/* SDIO data block size */ +#define DATACTL_BLKSZ(regval) (BITS(4,7) & ((uint32_t)(regval) << 4)) +#define SDIO_DATABLOCKSIZE_1BYTE DATACTL_BLKSZ(0) /*!< block size = 1 byte */ +#define SDIO_DATABLOCKSIZE_2BYTES DATACTL_BLKSZ(1) /*!< block size = 2 bytes */ +#define SDIO_DATABLOCKSIZE_4BYTES DATACTL_BLKSZ(2) /*!< block size = 4 bytes */ +#define SDIO_DATABLOCKSIZE_8BYTES DATACTL_BLKSZ(3) /*!< block size = 8 bytes */ +#define SDIO_DATABLOCKSIZE_16BYTES DATACTL_BLKSZ(4) /*!< block size = 16 bytes */ +#define SDIO_DATABLOCKSIZE_32BYTES DATACTL_BLKSZ(5) /*!< block size = 32 bytes */ +#define SDIO_DATABLOCKSIZE_64BYTES DATACTL_BLKSZ(6) /*!< block size = 64 bytes */ +#define SDIO_DATABLOCKSIZE_128BYTES DATACTL_BLKSZ(7) /*!< block size = 128 bytes */ +#define SDIO_DATABLOCKSIZE_256BYTES DATACTL_BLKSZ(8) /*!< block size = 256 bytes */ +#define SDIO_DATABLOCKSIZE_512BYTES DATACTL_BLKSZ(9) /*!< block size = 512 bytes */ +#define SDIO_DATABLOCKSIZE_1024BYTES DATACTL_BLKSZ(10) /*!< block size = 1024 bytes */ +#define SDIO_DATABLOCKSIZE_2048BYTES DATACTL_BLKSZ(11) /*!< block size = 2048 bytes */ +#define SDIO_DATABLOCKSIZE_4096BYTES DATACTL_BLKSZ(12) /*!< block size = 4096 bytes */ +#define SDIO_DATABLOCKSIZE_8192BYTES DATACTL_BLKSZ(13) /*!< block size = 8192 bytes */ +#define SDIO_DATABLOCKSIZE_16384BYTES DATACTL_BLKSZ(14) /*!< block size = 16384 bytes */ + +/* SDIO data transfer mode */ +#define SDIO_TRANSMODE_BLOCK ((uint32_t)0x00000000U)/*!< block transfer */ +#define SDIO_TRANSMODE_STREAM SDIO_DATACTL_TRANSMOD /*!< stream transfer or SDIO multibyte transfer */ + +/* SDIO data transfer direction */ +#define SDIO_TRANSDIRECTION_TOCARD ((uint32_t)0x00000000U)/*!< write data to card */ +#define SDIO_TRANSDIRECTION_TOSDIO SDIO_DATACTL_DATADIR /*!< read data from card */ + +/* SDIO read wait type */ +#define SDIO_READWAITTYPE_DAT2 ((uint32_t)0x00000000U)/*!< read wait control using SDIO_DAT[2] */ +#define SDIO_READWAITTYPE_CLK SDIO_DATACTL_RWTYPE /*!< read wait control by stopping SDIO_CLK */ + +/* function declarations */ +/* deinitialize the SDIO */ +void sdio_deinit(void); +/* configure the SDIO clock */ +void sdio_clock_config(uint32_t clock_edge, uint32_t clock_bypass, uint32_t clock_powersave, uint16_t clock_division); +/* enable hardware clock control */ +void sdio_hardware_clock_enable(void); +/* disable hardware clock control */ +void sdio_hardware_clock_disable(void); +/* set different SDIO card bus mode */ +void sdio_bus_mode_set(uint32_t bus_mode); +/* set the SDIO power state */ +void sdio_power_state_set(uint32_t power_state); +/* get the SDIO power state */ +uint32_t sdio_power_state_get(void); +/* enable SDIO_CLK clock output */ +void sdio_clock_enable(void); +/* disable SDIO_CLK clock output */ +void sdio_clock_disable(void); + +/* configure the command index, argument, response type, wait type and CSM to send command */ +/* configure the command and response */ +void sdio_command_response_config(uint32_t cmd_index, uint32_t cmd_argument, uint32_t response_type); +/* set the command state machine wait type */ +void sdio_wait_type_set(uint32_t wait_type); +/* enable the CSM(command state machine) */ +void sdio_csm_enable(void); +/* disable the CSM(command state machine) */ +void sdio_csm_disable(void); +/* get the last response command index */ +uint8_t sdio_command_index_get(void); +/* get the response for the last received command */ +uint32_t sdio_response_get(uint32_t responsex); + +/* configure the data timeout, length, block size, transfer mode, direction and DSM for data transfer */ +/* configure the data timeout, data length and data block size */ +void sdio_data_config(uint32_t data_timeout, uint32_t data_length, uint32_t data_blocksize); +/* configure the data transfer mode and direction */ +void sdio_data_transfer_config(uint32_t transfer_mode, uint32_t transfer_direction); +/* enable the DSM(data state machine) for data transfer */ +void sdio_dsm_enable(void); +/* disable the DSM(data state machine) */ +void sdio_dsm_disable(void); +/* write data(one word) to the transmit FIFO */ +void sdio_data_write(uint32_t data); +/* read data(one word) from the receive FIFO */ +uint32_t sdio_data_read(void); +/* get the number of remaining data bytes to be transferred to card */ +uint32_t sdio_data_counter_get(void); +/* get the number of words remaining to be written or read from FIFO */ +uint32_t sdio_fifo_counter_get(void); +/* enable the DMA request for SDIO */ +void sdio_dma_enable(void); +/* disable the DMA request for SDIO */ +void sdio_dma_disable(void); + +/* get the flags state of SDIO */ +FlagStatus sdio_flag_get(uint32_t flag); +/* clear the pending flags of SDIO */ +void sdio_flag_clear(uint32_t flag); +/* enable the SDIO interrupt */ +void sdio_interrupt_enable(uint32_t int_flag); +/* disable the SDIO interrupt */ +void sdio_interrupt_disable(uint32_t int_flag); +/* get the interrupt flags state of SDIO */ +FlagStatus sdio_interrupt_flag_get(uint32_t int_flag); +/* clear the interrupt pending flags of SDIO */ +void sdio_interrupt_flag_clear(uint32_t int_flag); + +/* enable the read wait mode(SD I/O only) */ +void sdio_readwait_enable(void); +/* disable the read wait mode(SD I/O only) */ +void sdio_readwait_disable(void); +/* enable the function that stop the read wait process(SD I/O only) */ +void sdio_stop_readwait_enable(void); +/* disable the function that stop the read wait process(SD I/O only) */ +void sdio_stop_readwait_disable(void); +/* set the read wait type(SD I/O only) */ +void sdio_readwait_type_set(uint32_t readwait_type); +/* enable the SD I/O mode specific operation(SD I/O only) */ +void sdio_operation_enable(void); +/* disable the SD I/O mode specific operation(SD I/O only) */ +void sdio_operation_disable(void); +/* enable the SD I/O suspend operation(SD I/O only) */ +void sdio_suspend_enable(void); +/* disable the SD I/O suspend operation(SD I/O only) */ +void sdio_suspend_disable(void); + +/* enable the CE-ATA command(CE-ATA only) */ +void sdio_ceata_command_enable(void); +/* disable the CE-ATA command(CE-ATA only) */ +void sdio_ceata_command_disable(void); +/* enable the CE-ATA interrupt(CE-ATA only) */ +void sdio_ceata_interrupt_enable(void); +/* disable the CE-ATA interrupt(CE-ATA only) */ +void sdio_ceata_interrupt_disable(void); +/* enable the CE-ATA command completion signal(CE-ATA only) */ +void sdio_ceata_command_completion_enable(void); +/* disable the CE-ATA command completion signal(CE-ATA only) */ +void sdio_ceata_command_completion_disable(void); + +#endif /* GD32F10X_SDIO_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_spi.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_spi.h new file mode 100644 index 0000000000000000000000000000000000000000..0cd8c26786ff70d0d9e6c1ab82c21e19523ffb4b --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_spi.h @@ -0,0 +1,328 @@ +/*! + \file gd32f10x_spi.h + \brief definitions for the SPI + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_SPI_H +#define GD32F10X_SPI_H + +#include "gd32f10x.h" + +/* SPIx(x=0,1,2) definitions */ +#define SPI0 (SPI_BASE + 0x0000F800U) +#define SPI1 SPI_BASE +#define SPI2 (SPI_BASE + 0x00000400U) + +/* SPI registers definitions */ +#define SPI_CTL0(spix) REG32((spix) + 0x00U) /*!< SPI control register 0 */ +#define SPI_CTL1(spix) REG32((spix) + 0x04U) /*!< SPI control register 1*/ +#define SPI_STAT(spix) REG32((spix) + 0x08U) /*!< SPI status register */ +#define SPI_DATA(spix) REG32((spix) + 0x0CU) /*!< SPI data register */ +#define SPI_CRCPOLY(spix) REG32((spix) + 0x10U) /*!< SPI CRC polynomial register */ +#define SPI_RCRC(spix) REG32((spix) + 0x14U) /*!< SPI receive CRC register */ +#define SPI_TCRC(spix) REG32((spix) + 0x18U) /*!< SPI transmit CRC register */ +#define SPI_I2SCTL(spix) REG32((spix) + 0x1CU) /*!< SPI I2S control register */ +#define SPI_I2SPSC(spix) REG32((spix) + 0x20U) /*!< SPI I2S clock prescaler register */ + +/* bits definitions */ +/* SPI_CTL0 */ +#define SPI_CTL0_CKPH BIT(0) /*!< clock phase selection*/ +#define SPI_CTL0_CKPL BIT(1) /*!< clock polarity selection */ +#define SPI_CTL0_MSTMOD BIT(2) /*!< master mode enable */ +#define SPI_CTL0_PSC BITS(3,5) /*!< master clock prescaler selection */ +#define SPI_CTL0_SPIEN BIT(6) /*!< SPI enable*/ +#define SPI_CTL0_LF BIT(7) /*!< LSB first mode */ +#define SPI_CTL0_SWNSS BIT(8) /*!< NSS pin selection in NSS software mode */ +#define SPI_CTL0_SWNSSEN BIT(9) /*!< NSS software mode selection */ +#define SPI_CTL0_RO BIT(10) /*!< receive only */ +#define SPI_CTL0_FF16 BIT(11) /*!< data frame size */ +#define SPI_CTL0_CRCNT BIT(12) /*!< CRC next transfer */ +#define SPI_CTL0_CRCEN BIT(13) /*!< CRC calculation enable */ +#define SPI_CTL0_BDOEN BIT(14) /*!< bidirectional transmit output enable*/ +#define SPI_CTL0_BDEN BIT(15) /*!< bidirectional enable */ + +/* SPI_CTL1 */ +#define SPI_CTL1_DMAREN BIT(0) /*!< receive buffer dma enable */ +#define SPI_CTL1_DMATEN BIT(1) /*!< transmit buffer dma enable */ +#define SPI_CTL1_NSSDRV BIT(2) /*!< drive NSS output */ +#define SPI_CTL1_ERRIE BIT(5) /*!< errors interrupt enable */ +#define SPI_CTL1_RBNEIE BIT(6) /*!< receive buffer not empty interrupt enable */ +#define SPI_CTL1_TBEIE BIT(7) /*!< transmit buffer empty interrupt enable */ + +/* SPI_STAT */ +#define SPI_STAT_RBNE BIT(0) /*!< receive buffer not empty */ +#define SPI_STAT_TBE BIT(1) /*!< transmit buffer empty */ +#define SPI_STAT_I2SCH BIT(2) /*!< I2S channel side */ +#define SPI_STAT_TXURERR BIT(3) /*!< I2S transmission underrun error bit */ +#define SPI_STAT_CRCERR BIT(4) /*!< SPI CRC error bit */ +#define SPI_STAT_CONFERR BIT(5) /*!< SPI configuration error bit */ +#define SPI_STAT_RXORERR BIT(6) /*!< SPI reception overrun error bit */ +#define SPI_STAT_TRANS BIT(7) /*!< transmitting on-going bit */ + +/* SPI_DATA */ +#define SPI_DATA_DATA BITS(0,15) /*!< data transfer register */ + +/* SPI_CRCPOLY */ +#define SPI_CRCPOLY_CPR BITS(0,15) /*!< CRC polynomial value */ + +/* SPI_RCRC */ +#define SPI_RCRC_RCR BITS(0,15) /*!< RX CRC value */ + +/* SPI_TCRC */ +#define SPI_TCRC_TCR BITS(0,15) /*!< TX CRC value */ + +/* SPI_I2SCTL */ +#define SPI_I2SCTL_CHLEN BIT(0) /*!< channel length */ +#define SPI_I2SCTL_DTLEN BITS(1,2) /*!< data length */ +#define SPI_I2SCTL_CKPL BIT(3) /*!< idle state clock polarity */ +#define SPI_I2SCTL_I2SSTD BITS(4,5) /*!< I2S standard selection */ +#define SPI_I2SCTL_PCMSMOD BIT(7) /*!< PCM frame synchronization mode */ +#define SPI_I2SCTL_I2SOPMOD BITS(8,9) /*!< I2S operation mode */ +#define SPI_I2SCTL_I2SEN BIT(10) /*!< I2S enable */ +#define SPI_I2SCTL_I2SSEL BIT(11) /*!< I2S mode selection */ + +/* SPI_I2SPSC */ +#define SPI_I2SPSC_DIV BITS(0,7) /*!< dividing factor for the prescaler */ +#define SPI_I2SPSC_OF BIT(8) /*!< odd factor for the prescaler */ +#define SPI_I2SPSC_MCKOEN BIT(9) /*!< I2S MCK output enable */ + +/* constants definitions */ +/* SPI and I2S parameter struct definitions */ +typedef struct +{ + uint32_t device_mode; /*!< SPI master or slave */ + uint32_t trans_mode; /*!< SPI transtype */ + uint32_t frame_size; /*!< SPI frame size */ + uint32_t nss; /*!< SPI NSS control by handware or software */ + uint32_t endian; /*!< SPI big endian or little endian */ + uint32_t clock_polarity_phase; /*!< SPI clock phase and polarity */ + uint32_t prescale; /*!< SPI prescale factor */ +}spi_parameter_struct; + +/* SPI mode definitions */ +#define SPI_MASTER (SPI_CTL0_MSTMOD | SPI_CTL0_SWNSS) /*!< SPI as master */ +#define SPI_SLAVE ((uint32_t)0x00000000U) /*!< SPI as slave */ + +/* SPI bidirectional transfer direction */ +#define SPI_BIDIRECTIONAL_TRANSMIT SPI_CTL0_BDOEN /*!< SPI work in transmit-only mode */ +#define SPI_BIDIRECTIONAL_RECEIVE (~SPI_CTL0_BDOEN) /*!< SPI work in receive-only mode */ + +/* SPI transmit type */ +#define SPI_TRANSMODE_FULLDUPLEX ((uint32_t)0x00000000U) /*!< SPI receive and send data at fullduplex communication */ +#define SPI_TRANSMODE_RECEIVEONLY SPI_CTL0_RO /*!< SPI only receive data */ +#define SPI_TRANSMODE_BDRECEIVE SPI_CTL0_BDEN /*!< bidirectional receive data */ +#define SPI_TRANSMODE_BDTRANSMIT (SPI_CTL0_BDEN | SPI_CTL0_BDOEN) /*!< bidirectional transmit data*/ + +/* SPI frame size */ +#define SPI_FRAMESIZE_16BIT SPI_CTL0_FF16 /*!< SPI frame size is 16 bits */ +#define SPI_FRAMESIZE_8BIT ((uint32_t)0x00000000U) /*!< SPI frame size is 8 bits */ + +/* SPI NSS control mode */ +#define SPI_NSS_SOFT SPI_CTL0_SWNSSEN /*!< SPI NSS control by software */ +#define SPI_NSS_HARD ((uint32_t)0x00000000U) /*!< SPI NSS control by hardware */ + +/* SPI transmit way */ +#define SPI_ENDIAN_MSB ((uint32_t)0x00000000U) /*!< SPI transmit way is big endian: transmit MSB first */ +#define SPI_ENDIAN_LSB SPI_CTL0_LF /*!< SPI transmit way is little endian: transmit LSB first */ + +/* SPI clock phase and polarity */ +#define SPI_CK_PL_LOW_PH_1EDGE ((uint32_t)0x00000000U) /*!< SPI clock polarity is low level and phase is first edge */ +#define SPI_CK_PL_HIGH_PH_1EDGE SPI_CTL0_CKPL /*!< SPI clock polarity is high level and phase is first edge */ +#define SPI_CK_PL_LOW_PH_2EDGE SPI_CTL0_CKPH /*!< SPI clock polarity is low level and phase is second edge */ +#define SPI_CK_PL_HIGH_PH_2EDGE (SPI_CTL0_CKPL | SPI_CTL0_CKPH) /*!< SPI clock polarity is high level and phase is second edge */ + +/* SPI clock prescale factor */ +#define CTL0_PSC(regval) (BITS(3,5) & ((uint32_t)(regval) << 3)) +#define SPI_PSC_2 CTL0_PSC(0) /*!< SPI clock prescale factor is 2 */ +#define SPI_PSC_4 CTL0_PSC(1) /*!< SPI clock prescale factor is 4 */ +#define SPI_PSC_8 CTL0_PSC(2) /*!< SPI clock prescale factor is 8 */ +#define SPI_PSC_16 CTL0_PSC(3) /*!< SPI clock prescale factor is 16 */ +#define SPI_PSC_32 CTL0_PSC(4) /*!< SPI clock prescale factor is 32 */ +#define SPI_PSC_64 CTL0_PSC(5) /*!< SPI clock prescale factor is 64 */ +#define SPI_PSC_128 CTL0_PSC(6) /*!< SPI clock prescale factor is 128 */ +#define SPI_PSC_256 CTL0_PSC(7) /*!< SPI clock prescale factor is 256 */ + +/* I2S audio sample rate */ +#define I2S_AUDIOSAMPLE_8K ((uint32_t)8000U) /*!< I2S audio sample rate is 8KHz */ +#define I2S_AUDIOSAMPLE_11K ((uint32_t)11025U) /*!< I2S audio sample rate is 11KHz */ +#define I2S_AUDIOSAMPLE_16K ((uint32_t)16000U) /*!< I2S audio sample rate is 16KHz */ +#define I2S_AUDIOSAMPLE_22K ((uint32_t)22050U) /*!< I2S audio sample rate is 22KHz */ +#define I2S_AUDIOSAMPLE_32K ((uint32_t)32000U) /*!< I2S audio sample rate is 32KHz */ +#define I2S_AUDIOSAMPLE_44K ((uint32_t)44100U) /*!< I2S audio sample rate is 44KHz */ +#define I2S_AUDIOSAMPLE_48K ((uint32_t)48000U) /*!< I2S audio sample rate is 48KHz */ +#define I2S_AUDIOSAMPLE_96K ((uint32_t)96000U) /*!< I2S audio sample rate is 96KHz */ +#define I2S_AUDIOSAMPLE_192K ((uint32_t)192000U) /*!< I2S audio sample rate is 192KHz */ + +/* I2S frame format */ +#define I2SCTL_DTLEN(regval) (BITS(1,2) & ((uint32_t)(regval) << 1)) +#define I2S_FRAMEFORMAT_DT16B_CH16B I2SCTL_DTLEN(0) /*!< I2S data length is 16 bit and channel length is 16 bit */ +#define I2S_FRAMEFORMAT_DT16B_CH32B (I2SCTL_DTLEN(0) | SPI_I2SCTL_CHLEN) /*!< I2S data length is 16 bit and channel length is 32 bit */ +#define I2S_FRAMEFORMAT_DT24B_CH32B (I2SCTL_DTLEN(1) | SPI_I2SCTL_CHLEN) /*!< I2S data length is 24 bit and channel length is 32 bit */ +#define I2S_FRAMEFORMAT_DT32B_CH32B (I2SCTL_DTLEN(2) | SPI_I2SCTL_CHLEN) /*!< I2S data length is 32 bit and channel length is 32 bit */ + +/* I2S master clock output */ +#define I2S_MCKOUT_DISABLE ((uint32_t)0x00000000U) /*!< I2S master clock output disable */ +#define I2S_MCKOUT_ENABLE SPI_I2SPSC_MCKOEN /*!< I2S master clock output enable */ + +/* I2S operation mode */ +#define I2SCTL_I2SOPMOD(regval) (BITS(8,9) & ((uint32_t)(regval) << 8)) +#define I2S_MODE_SLAVETX I2SCTL_I2SOPMOD(0) /*!< I2S slave transmit mode */ +#define I2S_MODE_SLAVERX I2SCTL_I2SOPMOD(1) /*!< I2S slave receive mode */ +#define I2S_MODE_MASTERTX I2SCTL_I2SOPMOD(2) /*!< I2S master transmit mode */ +#define I2S_MODE_MASTERRX I2SCTL_I2SOPMOD(3) /*!< I2S master receive mode */ + +/* I2S standard */ +#define I2SCTL_I2SSTD(regval) (BITS(4,5) & ((uint32_t)(regval) << 4)) +#define I2S_STD_PHILLIPS I2SCTL_I2SSTD(0) /*!< I2S phillips standard */ +#define I2S_STD_MSB I2SCTL_I2SSTD(1) /*!< I2S MSB standard */ +#define I2S_STD_LSB I2SCTL_I2SSTD(2) /*!< I2S LSB standard */ +#define I2S_STD_PCMSHORT I2SCTL_I2SSTD(3) /*!< I2S PCM short standard */ +#define I2S_STD_PCMLONG (I2SCTL_I2SSTD(3) | SPI_I2SCTL_PCMSMOD) /*!< I2S PCM long standard */ + +/* I2S clock polarity */ +#define I2S_CKPL_LOW ((uint32_t)0x00000000U) /*!< I2S clock polarity low level */ +#define I2S_CKPL_HIGH SPI_I2SCTL_CKPL /*!< I2S clock polarity high level */ + +/* SPI DMA constants definitions */ +#define SPI_DMA_TRANSMIT ((uint8_t)0x00U) /*!< SPI transmit data use DMA */ +#define SPI_DMA_RECEIVE ((uint8_t)0x01U) /*!< SPI receive data use DMA */ + +/* SPI CRC constants definitions */ +#define SPI_CRC_TX ((uint8_t)0x00U) /*!< SPI transmit CRC value */ +#define SPI_CRC_RX ((uint8_t)0x01U) /*!< SPI receive CRC value */ + +/* SPI/I2S interrupt enable/disable constants definitions */ +#define SPI_I2S_INT_TBE ((uint8_t)0x00U) /*!< transmit buffer empty interrupt */ +#define SPI_I2S_INT_RBNE ((uint8_t)0x01U) /*!< receive buffer not empty interrupt */ +#define SPI_I2S_INT_ERR ((uint8_t)0x02U) /*!< error interrupt */ + +/* SPI/I2S interrupt flag constants definitions */ +#define SPI_I2S_INT_FLAG_TBE ((uint8_t)0x00U) /*!< transmit buffer empty interrupt flag */ +#define SPI_I2S_INT_FLAG_RBNE ((uint8_t)0x01U) /*!< receive buffer not empty interrupt flag */ +#define SPI_I2S_INT_FLAG_RXORERR ((uint8_t)0x02U) /*!< overrun interrupt flag */ +#define SPI_INT_FLAG_CONFERR ((uint8_t)0x03U) /*!< config error interrupt flag */ +#define SPI_INT_FLAG_CRCERR ((uint8_t)0x04U) /*!< CRC error interrupt flag */ +#define I2S_INT_FLAG_TXURERR ((uint8_t)0x05U) /*!< underrun error interrupt flag */ + +/* SPI/I2S flag definitions */ +#define SPI_FLAG_RBNE SPI_STAT_RBNE /*!< receive buffer not empty flag */ +#define SPI_FLAG_TBE SPI_STAT_TBE /*!< transmit buffer empty flag */ +#define SPI_FLAG_CRCERR SPI_STAT_CRCERR /*!< CRC error flag */ +#define SPI_FLAG_CONFERR SPI_STAT_CONFERR /*!< mode config error flag */ +#define SPI_FLAG_RXORERR SPI_STAT_RXORERR /*!< receive overrun error flag */ +#define SPI_FLAG_TRANS SPI_STAT_TRANS /*!< transmit on-going flag */ +#define I2S_FLAG_RBNE SPI_STAT_RBNE /*!< receive buffer not empty flag */ +#define I2S_FLAG_TBE SPI_STAT_TBE /*!< transmit buffer empty flag */ +#define I2S_FLAG_CH SPI_STAT_I2SCH /*!< channel side flag */ +#define I2S_FLAG_TXURERR SPI_STAT_TXURERR /*!< underrun error flag */ +#define I2S_FLAG_RXORERR SPI_STAT_RXORERR /*!< overrun error flag */ +#define I2S_FLAG_TRANS SPI_STAT_TRANS /*!< transmit on-going flag */ + +/* function declarations */ +/* SPI/I2S deinitialization and initialization functions */ +/* reset SPI and I2S */ +void spi_i2s_deinit(uint32_t spi_periph); +/* initialize the parameters of SPI struct with the default values */ +void spi_struct_para_init(spi_parameter_struct* spi_struct); +/* initialize SPI parameter */ +void spi_init(uint32_t spi_periph, spi_parameter_struct* spi_struct); +/* enable SPI */ +void spi_enable(uint32_t spi_periph); +/* disable SPI */ +void spi_disable(uint32_t spi_periph); + +/* initialize I2S parameter */ +void i2s_init(uint32_t spi_periph,uint32_t mode, uint32_t standard, uint32_t ckpl); +/* configure I2S prescaler */ +void i2s_psc_config(uint32_t spi_periph, uint32_t audiosample, uint32_t frameformat, uint32_t mckout); +/* enable I2S */ +void i2s_enable(uint32_t spi_periph); +/* disable I2S */ +void i2s_disable(uint32_t spi_periph); + +/* NSS functions */ +/* enable SPI NSS output */ +void spi_nss_output_enable(uint32_t spi_periph); +/* disable SPI NSS output */ +void spi_nss_output_disable(uint32_t spi_periph); +/* SPI NSS pin high level in software mode */ +void spi_nss_internal_high(uint32_t spi_periph); +/* SPI NSS pin low level in software mode */ +void spi_nss_internal_low(uint32_t spi_periph); + +/* DMA communication */ +/* enable SPI DMA */ +void spi_dma_enable(uint32_t spi_periph, uint8_t dma); +/* disable SPI DMA */ +void spi_dma_disable(uint32_t spi_periph, uint8_t dma); + +/* normal mode communication */ +/* configure SPI/I2S data frame format */ +void spi_i2s_data_frame_format_config(uint32_t spi_periph, uint16_t frame_format); +/* SPI transmit data */ +void spi_i2s_data_transmit(uint32_t spi_periph, uint16_t data); +/* SPI receive data */ +uint16_t spi_i2s_data_receive(uint32_t spi_periph); +/* configure SPI bidirectional transfer direction */ +void spi_bidirectional_transfer_config(uint32_t spi_periph, uint32_t transfer_direction); + +/* SPI CRC functions */ +/* set SPI CRC polynomial */ +void spi_crc_polynomial_set(uint32_t spi_periph, uint16_t crc_poly); +/* get SPI CRC polynomial */ +uint16_t spi_crc_polynomial_get(uint32_t spi_periph); +/* turn on SPI CRC function */ +void spi_crc_on(uint32_t spi_periph); +/* turn off SPI CRC function */ +void spi_crc_off(uint32_t spi_periph); +/* SPI next data is CRC value */ +void spi_crc_next(uint32_t spi_periph); +/* get SPI CRC send value or receive value */ +uint16_t spi_crc_get(uint32_t spi_periph, uint8_t crc); + +/* flag and interrupt functions */ +/* enable SPI and I2S interrupt */ +void spi_i2s_interrupt_enable(uint32_t spi_periph, uint8_t interrupt); +/* disable SPI and I2S interrupt */ +void spi_i2s_interrupt_disable(uint32_t spi_periph, uint8_t interrupt); +/* get SPI and I2S interrupt status */ +FlagStatus spi_i2s_interrupt_flag_get(uint32_t spi_periph, uint8_t interrupt); +/* get SPI and I2S flag status */ +FlagStatus spi_i2s_flag_get(uint32_t spi_periph, uint32_t flag); +/* clear SPI CRC error flag status */ +void spi_crc_error_clear(uint32_t spi_periph); + +#endif /* GD32F10X_SPI_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_timer.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_timer.h new file mode 100644 index 0000000000000000000000000000000000000000..01af9b655c93c46f00d43d09030dbc3f83add94b --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_timer.h @@ -0,0 +1,730 @@ +/*! + \file gd32f10x_timer.h + \brief definitions for the TIMER + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_TIMER_H +#define GD32F10X_TIMER_H + +#include "gd32f10x.h" + +/* TIMERx(x=0..13) definitions */ +#define TIMER0 (TIMER_BASE + 0x00012C00U) +#define TIMER1 (TIMER_BASE + 0x00000000U) +#define TIMER2 (TIMER_BASE + 0x00000400U) +#define TIMER3 (TIMER_BASE + 0x00000800U) +#define TIMER4 (TIMER_BASE + 0x00000C00U) +#define TIMER5 (TIMER_BASE + 0x00001000U) +#define TIMER6 (TIMER_BASE + 0x00001400U) +#define TIMER7 (TIMER_BASE + 0x00013400U) +#define TIMER8 (TIMER_BASE + 0x00014C00U) +#define TIMER9 (TIMER_BASE + 0x00015000U) +#define TIMER10 (TIMER_BASE + 0x00015400U) +#define TIMER11 (TIMER_BASE + 0x00001800U) +#define TIMER12 (TIMER_BASE + 0x00001C00U) +#define TIMER13 (TIMER_BASE + 0x00002000U) + +/* registers definitions */ +#define TIMER_CTL0(timerx) REG32((timerx) + 0x00U) /*!< TIMER control register 0 */ +#define TIMER_CTL1(timerx) REG32((timerx) + 0x04U) /*!< TIMER control register 1 */ +#define TIMER_SMCFG(timerx) REG32((timerx) + 0x08U) /*!< TIMER slave mode configuration register */ +#define TIMER_DMAINTEN(timerx) REG32((timerx) + 0x0CU) /*!< TIMER DMA and interrupt enable register */ +#define TIMER_INTF(timerx) REG32((timerx) + 0x10U) /*!< TIMER interrupt flag register */ +#define TIMER_SWEVG(timerx) REG32((timerx) + 0x14U) /*!< TIMER software event generation register */ +#define TIMER_CHCTL0(timerx) REG32((timerx) + 0x18U) /*!< TIMER channel control register 0 */ +#define TIMER_CHCTL1(timerx) REG32((timerx) + 0x1CU) /*!< TIMER channel control register 1 */ +#define TIMER_CHCTL2(timerx) REG32((timerx) + 0x20U) /*!< TIMER channel control register 2 */ +#define TIMER_CNT(timerx) REG32((timerx) + 0x24U) /*!< TIMER counter register */ +#define TIMER_PSC(timerx) REG32((timerx) + 0x28U) /*!< TIMER prescaler register */ +#define TIMER_CAR(timerx) REG32((timerx) + 0x2CU) /*!< TIMER counter auto reload register */ +#define TIMER_CREP(timerx) REG32((timerx) + 0x30U) /*!< TIMER counter repetition register */ +#define TIMER_CH0CV(timerx) REG32((timerx) + 0x34U) /*!< TIMER channel 0 capture/compare value register */ +#define TIMER_CH1CV(timerx) REG32((timerx) + 0x38U) /*!< TIMER channel 1 capture/compare value register */ +#define TIMER_CH2CV(timerx) REG32((timerx) + 0x3CU) /*!< TIMER channel 2 capture/compare value register */ +#define TIMER_CH3CV(timerx) REG32((timerx) + 0x40U) /*!< TIMER channel 3 capture/compare value register */ +#define TIMER_CCHP(timerx) REG32((timerx) + 0x44U) /*!< TIMER channel complementary protection register */ +#define TIMER_DMACFG(timerx) REG32((timerx) + 0x48U) /*!< TIMER DMA configuration register */ +#define TIMER_DMATB(timerx) REG32((timerx) + 0x4CU) /*!< TIMER DMA transfer buffer register */ + +/* bits definitions */ +/* TIMER_CTL0 */ +#define TIMER_CTL0_CEN BIT(0) /*!< TIMER counter enable */ +#define TIMER_CTL0_UPDIS BIT(1) /*!< update disable */ +#define TIMER_CTL0_UPS BIT(2) /*!< update source */ +#define TIMER_CTL0_SPM BIT(3) /*!< single pulse mode */ +#define TIMER_CTL0_DIR BIT(4) /*!< timer counter direction */ +#define TIMER_CTL0_CAM BITS(5,6) /*!< center-aligned mode selection */ +#define TIMER_CTL0_ARSE BIT(7) /*!< auto-reload shadow enable */ +#define TIMER_CTL0_CKDIV BITS(8,9) /*!< clock division */ + +/* TIMER_CTL1 */ +#define TIMER_CTL1_CCSE BIT(0) /*!< commutation control shadow enable */ +#define TIMER_CTL1_CCUC BIT(2) /*!< commutation control shadow register update control */ +#define TIMER_CTL1_DMAS BIT(3) /*!< DMA request source selection */ +#define TIMER_CTL1_MMC BITS(4,6) /*!< master mode control */ +#define TIMER_CTL1_TI0S BIT(7) /*!< channel 0 trigger input selection(hall mode selection) */ +#define TIMER_CTL1_ISO0 BIT(8) /*!< idle state of channel 0 output */ +#define TIMER_CTL1_ISO0N BIT(9) /*!< idle state of channel 0 complementary output */ +#define TIMER_CTL1_ISO1 BIT(10) /*!< idle state of channel 1 output */ +#define TIMER_CTL1_ISO1N BIT(11) /*!< idle state of channel 1 complementary output */ +#define TIMER_CTL1_ISO2 BIT(12) /*!< idle state of channel 2 output */ +#define TIMER_CTL1_ISO2N BIT(13) /*!< idle state of channel 2 complementary output */ +#define TIMER_CTL1_ISO3 BIT(14) /*!< idle state of channel 3 output */ + +/* TIMER_SMCFG */ +#define TIMER_SMCFG_SMC BITS(0,2) /*!< slave mode control */ +#define TIMER_SMCFG_TRGS BITS(4,6) /*!< trigger selection */ +#define TIMER_SMCFG_MSM BIT(7) /*!< master-slave mode */ +#define TIMER_SMCFG_ETFC BITS(8,11) /*!< external trigger filter control */ +#define TIMER_SMCFG_ETPSC BITS(12,13) /*!< external trigger prescaler */ +#define TIMER_SMCFG_SMC1 BIT(14) /*!< part of SMC for enable external clock mode 1 */ +#define TIMER_SMCFG_ETP BIT(15) /*!< external trigger polarity */ + +/* TIMER_DMAINTEN */ +#define TIMER_DMAINTEN_UPIE BIT(0) /*!< update interrupt enable */ +#define TIMER_DMAINTEN_CH0IE BIT(1) /*!< channel 0 capture/compare interrupt enable */ +#define TIMER_DMAINTEN_CH1IE BIT(2) /*!< channel 1 capture/compare interrupt enable */ +#define TIMER_DMAINTEN_CH2IE BIT(3) /*!< channel 2 capture/compare interrupt enable */ +#define TIMER_DMAINTEN_CH3IE BIT(4) /*!< channel 3 capture/compare interrupt enable */ +#define TIMER_DMAINTEN_CMTIE BIT(5) /*!< commutation interrupt request enable */ +#define TIMER_DMAINTEN_TRGIE BIT(6) /*!< trigger interrupt enable */ +#define TIMER_DMAINTEN_BRKIE BIT(7) /*!< break interrupt enable */ +#define TIMER_DMAINTEN_UPDEN BIT(8) /*!< update DMA request enable */ +#define TIMER_DMAINTEN_CH0DEN BIT(9) /*!< channel 0 capture/compare DMA request enable */ +#define TIMER_DMAINTEN_CH1DEN BIT(10) /*!< channel 1 capture/compare DMA request enable */ +#define TIMER_DMAINTEN_CH2DEN BIT(11) /*!< channel 2 capture/compare DMA request enable */ +#define TIMER_DMAINTEN_CH3DEN BIT(12) /*!< channel 3 capture/compare DMA request enable */ +#define TIMER_DMAINTEN_CMTDEN BIT(13) /*!< commutation DMA request enable */ +#define TIMER_DMAINTEN_TRGDEN BIT(14) /*!< trigger DMA request enable */ + +/* TIMER_INTF */ +#define TIMER_INTF_UPIF BIT(0) /*!< update interrupt flag */ +#define TIMER_INTF_CH0IF BIT(1) /*!< channel 0 capture/compare interrupt flag */ +#define TIMER_INTF_CH1IF BIT(2) /*!< channel 1 capture/compare interrupt flag */ +#define TIMER_INTF_CH2IF BIT(3) /*!< channel 2 capture/compare interrupt flag */ +#define TIMER_INTF_CH3IF BIT(4) /*!< channel 3 capture/compare interrupt flag */ +#define TIMER_INTF_CMTIF BIT(5) /*!< channel commutation interrupt flag */ +#define TIMER_INTF_TRGIF BIT(6) /*!< trigger interrupt flag */ +#define TIMER_INTF_BRKIF BIT(7) /*!< break interrupt flag */ +#define TIMER_INTF_CH0OF BIT(9) /*!< channel 0 over capture flag */ +#define TIMER_INTF_CH1OF BIT(10) /*!< channel 1 over capture flag */ +#define TIMER_INTF_CH2OF BIT(11) /*!< channel 2 over capture flag */ +#define TIMER_INTF_CH3OF BIT(12) /*!< channel 3 over capture flag */ + +/* TIMER_SWEVG */ +#define TIMER_SWEVG_UPG BIT(0) /*!< update event generate */ +#define TIMER_SWEVG_CH0G BIT(1) /*!< channel 0 capture or compare event generation */ +#define TIMER_SWEVG_CH1G BIT(2) /*!< channel 1 capture or compare event generation */ +#define TIMER_SWEVG_CH2G BIT(3) /*!< channel 2 capture or compare event generation */ +#define TIMER_SWEVG_CH3G BIT(4) /*!< channel 3 capture or compare event generation */ +#define TIMER_SWEVG_CMTG BIT(5) /*!< channel commutation event generation */ +#define TIMER_SWEVG_TRGG BIT(6) /*!< trigger event generation */ +#define TIMER_SWEVG_BRKG BIT(7) /*!< break event generation */ + +/* TIMER_CHCTL0 */ +/* output compare mode */ +#define TIMER_CHCTL0_CH0MS BITS(0,1) /*!< channel 0 mode selection */ +#define TIMER_CHCTL0_CH0COMFEN BIT(2) /*!< channel 0 output compare fast enable */ +#define TIMER_CHCTL0_CH0COMSEN BIT(3) /*!< channel 0 output compare shadow enable */ +#define TIMER_CHCTL0_CH0COMCTL BITS(4,6) /*!< channel 0 output compare control */ +#define TIMER_CHCTL0_CH0COMCEN BIT(7) /*!< channel 0 output compare clear enable */ +#define TIMER_CHCTL0_CH1MS BITS(8,9) /*!< channel 1 mode selection */ +#define TIMER_CHCTL0_CH1COMFEN BIT(10) /*!< channel 1 output compare fast enable */ +#define TIMER_CHCTL0_CH1COMSEN BIT(11) /*!< channel 1 output compare shadow enable */ +#define TIMER_CHCTL0_CH1COMCTL BITS(12,14) /*!< channel 1 output compare control */ +#define TIMER_CHCTL0_CH1COMCEN BIT(15) /*!< channel 1 output compare clear enable */ +/* input capture mode */ +#define TIMER_CHCTL0_CH0CAPPSC BITS(2,3) /*!< channel 0 input capture prescaler */ +#define TIMER_CHCTL0_CH0CAPFLT BITS(4,7) /*!< channel 0 input capture filter control */ +#define TIMER_CHCTL0_CH1CAPPSC BITS(10,11) /*!< channel 1 input capture prescaler */ +#define TIMER_CHCTL0_CH1CAPFLT BITS(12,15) /*!< channel 1 input capture filter control */ + +/* TIMER_CHCTL1 */ +/* output compare mode */ +#define TIMER_CHCTL1_CH2MS BITS(0,1) /*!< channel 2 mode selection */ +#define TIMER_CHCTL1_CH2COMFEN BIT(2) /*!< channel 2 output compare fast enable */ +#define TIMER_CHCTL1_CH2COMSEN BIT(3) /*!< channel 2 output compare shadow enable */ +#define TIMER_CHCTL1_CH2COMCTL BITS(4,6) /*!< channel 2 output compare control */ +#define TIMER_CHCTL1_CH2COMCEN BIT(7) /*!< channel 2 output compare clear enable */ +#define TIMER_CHCTL1_CH3MS BITS(8,9) /*!< channel 3 mode selection */ +#define TIMER_CHCTL1_CH3COMFEN BIT(10) /*!< channel 3 output compare fast enable */ +#define TIMER_CHCTL1_CH3COMSEN BIT(11) /*!< channel 3 output compare shadow enable */ +#define TIMER_CHCTL1_CH3COMCTL BITS(12,14) /*!< channel 3 output compare control */ +#define TIMER_CHCTL1_CH3COMCEN BIT(15) /*!< channel 3 output compare clear enable */ +/* input capture mode */ +#define TIMER_CHCTL1_CH2CAPPSC BITS(2,3) /*!< channel 2 input capture prescaler */ +#define TIMER_CHCTL1_CH2CAPFLT BITS(4,7) /*!< channel 2 input capture filter control */ +#define TIMER_CHCTL1_CH3CAPPSC BITS(10,11) /*!< channel 3 input capture prescaler */ +#define TIMER_CHCTL1_CH3CAPFLT BITS(12,15) /*!< channel 3 input capture filter control */ + +/* TIMER_CHCTL2 */ +#define TIMER_CHCTL2_CH0EN BIT(0) /*!< channel 0 capture/compare function enable */ +#define TIMER_CHCTL2_CH0P BIT(1) /*!< channel 0 capture/compare function polarity */ +#define TIMER_CHCTL2_CH0NEN BIT(2) /*!< channel 0 complementary output enable */ +#define TIMER_CHCTL2_CH0NP BIT(3) /*!< channel 0 complementary output polarity */ +#define TIMER_CHCTL2_CH1EN BIT(4) /*!< channel 1 capture/compare function enable */ +#define TIMER_CHCTL2_CH1P BIT(5) /*!< channel 1 capture/compare function polarity */ +#define TIMER_CHCTL2_CH1NEN BIT(6) /*!< channel 1 complementary output enable */ +#define TIMER_CHCTL2_CH1NP BIT(7) /*!< channel 1 complementary output polarity */ +#define TIMER_CHCTL2_CH2EN BIT(8) /*!< channel 2 capture/compare function enable */ +#define TIMER_CHCTL2_CH2P BIT(9) /*!< channel 2 capture/compare function polarity */ +#define TIMER_CHCTL2_CH2NEN BIT(10) /*!< channel 2 complementary output enable */ +#define TIMER_CHCTL2_CH2NP BIT(11) /*!< channel 2 complementary output polarity */ +#define TIMER_CHCTL2_CH3EN BIT(12) /*!< channel 3 capture/compare function enable */ +#define TIMER_CHCTL2_CH3P BIT(13) /*!< channel 3 capture/compare function polarity */ + +/* TIMER_CNT */ +#define TIMER_CNT_CNT BITS(0,15) /*!< 16 bit timer counter */ + +/* TIMER_PSC */ +#define TIMER_PSC_PSC BITS(0,15) /*!< prescaler value of the counter clock */ + +/* TIMER_CAR */ +#define TIMER_CAR_CARL BITS(0,15) /*!< 16 bit counter auto reload value */ + +/* TIMER_CREP */ +#define TIMER_CREP_CREP BITS(0,7) /*!< counter repetition value */ + +/* TIMER_CH0CV */ +#define TIMER_CH0CV_CH0VAL BITS(0,15) /*!< 16 bit capture/compare value of channel 0 */ + +/* TIMER_CH1CV */ +#define TIMER_CH1CV_CH1VAL BITS(0,15) /*!< 16 bit capture/compare value of channel 1 */ + +/* TIMER_CH2CV */ +#define TIMER_CH2CV_CH2VAL BITS(0,15) /*!< 16 bit capture/compare value of channel 2 */ + +/* TIMER_CH3CV */ +#define TIMER_CH3CV_CH3VAL BITS(0,15) /*!< 16 bit capture/compare value of channel 3 */ + +/* TIMER_CCHP */ +#define TIMER_CCHP_DTCFG BITS(0,7) /*!< dead time configure */ +#define TIMER_CCHP_PROT BITS(8,9) /*!< complementary register protect control */ +#define TIMER_CCHP_IOS BIT(10) /*!< idle mode off-state configure */ +#define TIMER_CCHP_ROS BIT(11) /*!< run mode off-state configure */ +#define TIMER_CCHP_BRKEN BIT(12) /*!< break enable */ +#define TIMER_CCHP_BRKP BIT(13) /*!< break polarity */ +#define TIMER_CCHP_OAEN BIT(14) /*!< output automatic enable */ +#define TIMER_CCHP_POEN BIT(15) /*!< primary output enable */ + +/* TIMER_DMACFG */ +#define TIMER_DMACFG_DMATA BITS(0,4) /*!< DMA transfer access start address */ +#define TIMER_DMACFG_DMATC BITS(8,12) /*!< DMA transfer count */ + +/* TIMER_DMATB */ +#define TIMER_DMATB_DMATB BITS(0,15) /*!< DMA transfer buffer address */ + +/* constants definitions */ +/* TIMER init parameter struct definitions */ +typedef struct +{ + uint16_t prescaler; /*!< prescaler value */ + uint16_t alignedmode; /*!< aligned mode */ + uint16_t counterdirection; /*!< counter direction */ + uint32_t period; /*!< period value */ + uint16_t clockdivision; /*!< clock division value */ + uint8_t repetitioncounter; /*!< the counter repetition value */ +}timer_parameter_struct; + +/* break parameter struct definitions*/ +typedef struct +{ + uint16_t runoffstate; /*!< run mode off-state */ + uint16_t ideloffstate; /*!< idle mode off-state */ + uint16_t deadtime; /*!< dead time */ + uint16_t breakpolarity; /*!< break polarity */ + uint16_t outputautostate; /*!< output automatic enable */ + uint16_t protectmode; /*!< complementary register protect control */ + uint16_t breakstate; /*!< break enable */ +}timer_break_parameter_struct; + +/* channel output parameter struct definitions */ +typedef struct +{ + uint16_t outputstate; /*!< channel output state */ + uint16_t outputnstate; /*!< channel complementary output state */ + uint16_t ocpolarity; /*!< channel output polarity */ + uint16_t ocnpolarity; /*!< channel complementary output polarity */ + uint16_t ocidlestate; /*!< idle state of channel output */ + uint16_t ocnidlestate; /*!< idle state of channel complementary output */ +}timer_oc_parameter_struct; + +/* channel input parameter struct definitions */ +typedef struct +{ + uint16_t icpolarity; /*!< channel input polarity */ + uint16_t icselection; /*!< channel input mode selection */ + uint16_t icprescaler; /*!< channel input capture prescaler */ + uint16_t icfilter; /*!< channel input capture filter control */ +}timer_ic_parameter_struct; + +/* TIMER interrupt enable or disable */ +#define TIMER_INT_UP TIMER_DMAINTEN_UPIE /*!< update interrupt */ +#define TIMER_INT_CH0 TIMER_DMAINTEN_CH0IE /*!< channel 0 interrupt */ +#define TIMER_INT_CH1 TIMER_DMAINTEN_CH1IE /*!< channel 1 interrupt */ +#define TIMER_INT_CH2 TIMER_DMAINTEN_CH2IE /*!< channel 2 interrupt */ +#define TIMER_INT_CH3 TIMER_DMAINTEN_CH3IE /*!< channel 3 interrupt */ +#define TIMER_INT_CMT TIMER_DMAINTEN_CMTIE /*!< channel commutation interrupt flag */ +#define TIMER_INT_TRG TIMER_DMAINTEN_TRGIE /*!< trigger interrupt */ +#define TIMER_INT_BRK TIMER_DMAINTEN_BRKIE /*!< break interrupt */ + +/* TIMER interrupt flag */ +#define TIMER_INT_FLAG_UP TIMER_INT_UP /*!< update interrupt */ +#define TIMER_INT_FLAG_CH0 TIMER_INT_CH0 /*!< channel 0 interrupt */ +#define TIMER_INT_FLAG_CH1 TIMER_INT_CH1 /*!< channel 1 interrupt */ +#define TIMER_INT_FLAG_CH2 TIMER_INT_CH2 /*!< channel 2 interrupt */ +#define TIMER_INT_FLAG_CH3 TIMER_INT_CH3 /*!< channel 3 interrupt */ +#define TIMER_INT_FLAG_CMT TIMER_INT_CMT /*!< channel commutation interrupt flag */ +#define TIMER_INT_FLAG_TRG TIMER_INT_TRG /*!< trigger interrupt */ +#define TIMER_INT_FLAG_BRK TIMER_INT_BRK + +/* TIMER flag */ +#define TIMER_FLAG_UP TIMER_INTF_UPIF /*!< update flag */ +#define TIMER_FLAG_CH0 TIMER_INTF_CH0IF /*!< channel 0 flag */ +#define TIMER_FLAG_CH1 TIMER_INTF_CH1IF /*!< channel 1 flag */ +#define TIMER_FLAG_CH2 TIMER_INTF_CH2IF /*!< channel 2 flag */ +#define TIMER_FLAG_CH3 TIMER_INTF_CH3IF /*!< channel 3 flag */ +#define TIMER_FLAG_CMT TIMER_INTF_CMTIF /*!< channel commutation flag */ +#define TIMER_FLAG_TRG TIMER_INTF_TRGIF /*!< trigger flag */ +#define TIMER_FLAG_BRK TIMER_INTF_BRKIF /*!< break flag */ +#define TIMER_FLAG_CH0O TIMER_INTF_CH0OF /*!< channel 0 overcapture flag */ +#define TIMER_FLAG_CH1O TIMER_INTF_CH1OF /*!< channel 1 overcapture flag */ +#define TIMER_FLAG_CH2O TIMER_INTF_CH2OF /*!< channel 2 overcapture flag */ +#define TIMER_FLAG_CH3O TIMER_INTF_CH3OF /*!< channel 3 overcapture flag */ +/* TIMER DMA source enable */ +#define TIMER_DMA_UPD ((uint16_t)TIMER_DMAINTEN_UPDEN) /*!< update DMA enable */ +#define TIMER_DMA_CH0D ((uint16_t)TIMER_DMAINTEN_CH0DEN) /*!< channel 0 DMA enable */ +#define TIMER_DMA_CH1D ((uint16_t)TIMER_DMAINTEN_CH1DEN) /*!< channel 1 DMA enable */ +#define TIMER_DMA_CH2D ((uint16_t)TIMER_DMAINTEN_CH2DEN) /*!< channel 2 DMA enable */ +#define TIMER_DMA_CH3D ((uint16_t)TIMER_DMAINTEN_CH3DEN) /*!< channel 3 DMA enable */ +#define TIMER_DMA_CMTD ((uint16_t)TIMER_DMAINTEN_CMTDEN) /*!< commutation DMA request enable */ +#define TIMER_DMA_TRGD ((uint16_t)TIMER_DMAINTEN_TRGDEN) /*!< trigger DMA enable */ + +/* channel DMA request source selection */ +#define TIMER_DMAREQUEST_UPDATEEVENT TIMER_CTL1_DMAS /*!< DMA request of channel n is sent when update event occurs */ +#define TIMER_DMAREQUEST_CHANNELEVENT ((uint32_t)0x00000000U) /*!< DMA request of channel n is sent when channel n event occurs */ + +/* DMA access base address */ +#define DMACFG_DMATA(regval) (BITS(0, 4) & ((uint32_t)(regval) << 0U)) +#define TIMER_DMACFG_DMATA_CTL0 DMACFG_DMATA(0) /*!< DMA transfer address is TIMER_CTL0 */ +#define TIMER_DMACFG_DMATA_CTL1 DMACFG_DMATA(1) /*!< DMA transfer address is TIMER_CTL1 */ +#define TIMER_DMACFG_DMATA_SMCFG DMACFG_DMATA(2) /*!< DMA transfer address is TIMER_SMCFG */ +#define TIMER_DMACFG_DMATA_DMAINTEN DMACFG_DMATA(3) /*!< DMA transfer address is TIMER_DMAINTEN */ +#define TIMER_DMACFG_DMATA_INTF DMACFG_DMATA(4) /*!< DMA transfer address is TIMER_INTF */ +#define TIMER_DMACFG_DMATA_SWEVG DMACFG_DMATA(5) /*!< DMA transfer address is TIMER_SWEVG */ +#define TIMER_DMACFG_DMATA_CHCTL0 DMACFG_DMATA(6) /*!< DMA transfer address is TIMER_CHCTL0 */ +#define TIMER_DMACFG_DMATA_CHCTL1 DMACFG_DMATA(7) /*!< DMA transfer address is TIMER_CHCTL1 */ +#define TIMER_DMACFG_DMATA_CHCTL2 DMACFG_DMATA(8) /*!< DMA transfer address is TIMER_CHCTL2 */ +#define TIMER_DMACFG_DMATA_CNT DMACFG_DMATA(9) /*!< DMA transfer address is TIMER_CNT */ +#define TIMER_DMACFG_DMATA_PSC DMACFG_DMATA(10) /*!< DMA transfer address is TIMER_PSC */ +#define TIMER_DMACFG_DMATA_CAR DMACFG_DMATA(11) /*!< DMA transfer address is TIMER_CAR */ +#define TIMER_DMACFG_DMATA_CREP DMACFG_DMATA(12) /*!< DMA transfer address is TIMER_CREP */ +#define TIMER_DMACFG_DMATA_CH0CV DMACFG_DMATA(13) /*!< DMA transfer address is TIMER_CH0CV */ +#define TIMER_DMACFG_DMATA_CH1CV DMACFG_DMATA(14) /*!< DMA transfer address is TIMER_CH1CV */ +#define TIMER_DMACFG_DMATA_CH2CV DMACFG_DMATA(15) /*!< DMA transfer address is TIMER_CH2CV */ +#define TIMER_DMACFG_DMATA_CH3CV DMACFG_DMATA(16) /*!< DMA transfer address is TIMER_CH3CV */ +#define TIMER_DMACFG_DMATA_CCHP DMACFG_DMATA(17) /*!< DMA transfer address is TIMER_CCHP */ +#define TIMER_DMACFG_DMATA_DMACFG DMACFG_DMATA(18) /*!< DMA transfer address is TIMER_DMACFG */ + +/* DMA access burst length */ +#define DMACFG_DMATC(regval) (BITS(8, 12) & ((uint32_t)(regval) << 8U)) +#define TIMER_DMACFG_DMATC_1TRANSFER DMACFG_DMATC(0) /*!< DMA transfer 1 time */ +#define TIMER_DMACFG_DMATC_2TRANSFER DMACFG_DMATC(1) /*!< DMA transfer 2 times */ +#define TIMER_DMACFG_DMATC_3TRANSFER DMACFG_DMATC(2) /*!< DMA transfer 3 times */ +#define TIMER_DMACFG_DMATC_4TRANSFER DMACFG_DMATC(3) /*!< DMA transfer 4 times */ +#define TIMER_DMACFG_DMATC_5TRANSFER DMACFG_DMATC(4) /*!< DMA transfer 5 times */ +#define TIMER_DMACFG_DMATC_6TRANSFER DMACFG_DMATC(5) /*!< DMA transfer 6 times */ +#define TIMER_DMACFG_DMATC_7TRANSFER DMACFG_DMATC(6) /*!< DMA transfer 7 times */ +#define TIMER_DMACFG_DMATC_8TRANSFER DMACFG_DMATC(7) /*!< DMA transfer 8 times */ +#define TIMER_DMACFG_DMATC_9TRANSFER DMACFG_DMATC(8) /*!< DMA transfer 9 times */ +#define TIMER_DMACFG_DMATC_10TRANSFER DMACFG_DMATC(9) /*!< DMA transfer 10 times */ +#define TIMER_DMACFG_DMATC_11TRANSFER DMACFG_DMATC(10) /*!< DMA transfer 11 times */ +#define TIMER_DMACFG_DMATC_12TRANSFER DMACFG_DMATC(11) /*!< DMA transfer 12 times */ +#define TIMER_DMACFG_DMATC_13TRANSFER DMACFG_DMATC(12) /*!< DMA transfer 13 times */ +#define TIMER_DMACFG_DMATC_14TRANSFER DMACFG_DMATC(13) /*!< DMA transfer 14 times */ +#define TIMER_DMACFG_DMATC_15TRANSFER DMACFG_DMATC(14) /*!< DMA transfer 15 times */ +#define TIMER_DMACFG_DMATC_16TRANSFER DMACFG_DMATC(15) /*!< DMA transfer 16 times */ +#define TIMER_DMACFG_DMATC_17TRANSFER DMACFG_DMATC(16) /*!< DMA transfer 17 times */ +#define TIMER_DMACFG_DMATC_18TRANSFER DMACFG_DMATC(17) /*!< DMA transfer 18 times */ + +/* TIMER software event generation source */ +#define TIMER_EVENT_SRC_UPG ((uint16_t)0x0001U) /*!< update event generation */ +#define TIMER_EVENT_SRC_CH0G ((uint16_t)0x0002U) /*!< channel 0 capture or compare event generation */ +#define TIMER_EVENT_SRC_CH1G ((uint16_t)0x0004U) /*!< channel 1 capture or compare event generation */ +#define TIMER_EVENT_SRC_CH2G ((uint16_t)0x0008U) /*!< channel 2 capture or compare event generation */ +#define TIMER_EVENT_SRC_CH3G ((uint16_t)0x0010U) /*!< channel 3 capture or compare event generation */ +#define TIMER_EVENT_SRC_CMTG ((uint16_t)0x0020U) /*!< channel commutation event generation */ +#define TIMER_EVENT_SRC_TRGG ((uint16_t)0x0040U) /*!< trigger event generation */ +#define TIMER_EVENT_SRC_BRKG ((uint16_t)0x0080U) /*!< break event generation */ + +/* center-aligned mode selection */ +#define CTL0_CAM(regval) ((uint16_t)(BITS(5, 6) & ((uint32_t)(regval) << 5U))) +#define TIMER_COUNTER_EDGE CTL0_CAM(0) /*!< edge-aligned mode */ +#define TIMER_COUNTER_CENTER_DOWN CTL0_CAM(1) /*!< center-aligned and counting down assert mode */ +#define TIMER_COUNTER_CENTER_UP CTL0_CAM(2) /*!< center-aligned and counting up assert mode */ +#define TIMER_COUNTER_CENTER_BOTH CTL0_CAM(3) /*!< center-aligned and counting up/down assert mode */ + +/* TIMER prescaler reload mode */ +#define TIMER_PSC_RELOAD_NOW TIMER_SWEVG_UPG /*!< the prescaler is loaded right now */ +#define TIMER_PSC_RELOAD_UPDATE ((uint32_t)0x00000000U) /*!< the prescaler is loaded at the next update event */ + +/* count direction */ +#define TIMER_COUNTER_UP ((uint16_t)0x0000U) /*!< counter up direction */ +#define TIMER_COUNTER_DOWN ((uint16_t)TIMER_CTL0_DIR) /*!< counter down direction */ + +/* specify division ratio between TIMER clock and dead-time and sampling clock */ +#define CTL0_CKDIV(regval) ((uint16_t)(BITS(8, 9) & ((uint32_t)(regval) << 8U))) +#define TIMER_CKDIV_DIV1 CTL0_CKDIV(0) /*!< clock division value is 1,fDTS=fTIMER_CK */ +#define TIMER_CKDIV_DIV2 CTL0_CKDIV(1) /*!< clock division value is 2,fDTS= fTIMER_CK/2 */ +#define TIMER_CKDIV_DIV4 CTL0_CKDIV(2) /*!< clock division value is 4, fDTS= fTIMER_CK/4 */ + +/* single pulse mode */ +#define TIMER_SP_MODE_SINGLE TIMER_CTL0_SPM /*!< single pulse mode */ +#define TIMER_SP_MODE_REPETITIVE ((uint32_t)0x00000000U) /*!< repetitive pulse mode */ + +/* update source */ +#define TIMER_UPDATE_SRC_REGULAR TIMER_CTL0_UPS /*!< update generate only by counter overflow/underflow */ +#define TIMER_UPDATE_SRC_GLOBAL ((uint32_t)0x00000000U) /*!< update generate by setting of UPG bit or the counter overflow/underflow,or the slave mode controller trigger */ + +/* run mode off-state configure */ +#define TIMER_ROS_STATE_ENABLE ((uint16_t)TIMER_CCHP_ROS) /*!< when POEN bit is set, the channel output signals(CHx_O/CHx_ON) are enabled, with relationship to CHxEN/CHxNEN bits */ +#define TIMER_ROS_STATE_DISABLE ((uint16_t)0x0000U) /*!< when POEN bit is set, the channel output signals(CHx_O/CHx_ON) are disabled */ + +/* idle mode off-state configure */ +#define TIMER_IOS_STATE_ENABLE ((uint16_t)TIMER_CCHP_IOS) /*!< when POEN bit is reset, he channel output signals(CHx_O/CHx_ON) are enabled, with relationship to CHxEN/CHxNEN bits */ +#define TIMER_IOS_STATE_DISABLE ((uint16_t)0x0000U) /*!< when POEN bit is reset, the channel output signals(CHx_O/CHx_ON) are disabled */ + +/* break input polarity */ +#define TIMER_BREAK_POLARITY_LOW ((uint16_t)0x0000U) /*!< break input polarity is low */ +#define TIMER_BREAK_POLARITY_HIGH ((uint16_t)TIMER_CCHP_BRKP) /*!< break input polarity is high */ + +/* output automatic enable */ +#define TIMER_OUTAUTO_ENABLE ((uint16_t)TIMER_CCHP_OAEN) /*!< output automatic enable */ +#define TIMER_OUTAUTO_DISABLE ((uint16_t)0x0000U) /*!< output automatic disable */ + +/* complementary register protect control */ +#define CCHP_PROT(regval) ((uint16_t)(BITS(8, 9) & ((uint32_t)(regval) << 8U))) +#define TIMER_CCHP_PROT_OFF CCHP_PROT(0) /*!< protect disable */ +#define TIMER_CCHP_PROT_0 CCHP_PROT(1) /*!< PROT mode 0 */ +#define TIMER_CCHP_PROT_1 CCHP_PROT(2) /*!< PROT mode 1 */ +#define TIMER_CCHP_PROT_2 CCHP_PROT(3) /*!< PROT mode 2 */ + +/* break input enable */ +#define TIMER_BREAK_ENABLE ((uint16_t)TIMER_CCHP_BRKEN) /*!< break input enable */ +#define TIMER_BREAK_DISABLE ((uint16_t)0x0000U) /*!< break input disable */ + +/* TIMER channel n(n=0,1,2,3) */ +#define TIMER_CH_0 ((uint16_t)0x0000U) /*!< TIMER channel 0(TIMERx(x=0..4,7..13)) */ +#define TIMER_CH_1 ((uint16_t)0x0001U) /*!< TIMER channel 1(TIMERx(x=0..4,7,8,11)) */ +#define TIMER_CH_2 ((uint16_t)0x0002U) /*!< TIMER channel 2(TIMERx(x=0..4,7)) */ +#define TIMER_CH_3 ((uint16_t)0x0003U) /*!< TIMER channel 3(TIMERx(x=0..4,7)) */ + +/* channel enable state */ +#define TIMER_CCX_ENABLE ((uint16_t)0x0001U) /*!< channel enable */ +#define TIMER_CCX_DISABLE ((uint16_t)0x0000U) /*!< channel disable */ + +/* channel complementary output enable state */ +#define TIMER_CCXN_ENABLE ((uint16_t)0x0004U) /*!< channel complementary enable */ +#define TIMER_CCXN_DISABLE ((uint16_t)0x0000U) /*!< channel complementary disable */ + +/* channel output polarity */ +#define TIMER_OC_POLARITY_HIGH ((uint16_t)0x0000U) /*!< channel output polarity is high */ +#define TIMER_OC_POLARITY_LOW ((uint16_t)0x0002U) /*!< channel output polarity is low */ + +/* channel complementary output polarity */ +#define TIMER_OCN_POLARITY_HIGH ((uint16_t)0x0000U) /*!< channel complementary output polarity is high */ +#define TIMER_OCN_POLARITY_LOW ((uint16_t)0x0008U) /*!< channel complementary output polarity is low */ + +/* idle state of channel output */ +#define TIMER_OC_IDLE_STATE_HIGH ((uint16_t)0x0100) /*!< idle state of channel output is high */ +#define TIMER_OC_IDLE_STATE_LOW ((uint16_t)0x0000) /*!< idle state of channel output is low */ + +/* idle state of channel complementary output */ +#define TIMER_OCN_IDLE_STATE_HIGH ((uint16_t)0x0200U) /*!< idle state of channel complementary output is high */ +#define TIMER_OCN_IDLE_STATE_LOW ((uint16_t)0x0000U) /*!< idle state of channel complementary output is low */ + +/* channel output compare mode */ +#define TIMER_OC_MODE_TIMING ((uint16_t)0x0000U) /*!< frozen mode */ +#define TIMER_OC_MODE_ACTIVE ((uint16_t)0x0010U) /*!< set the channel output */ +#define TIMER_OC_MODE_INACTIVE ((uint16_t)0x0020U) /*!< clear the channel output */ +#define TIMER_OC_MODE_TOGGLE ((uint16_t)0x0030U) /*!< toggle on match */ +#define TIMER_OC_MODE_LOW ((uint16_t)0x0040U) /*!< force low mode */ +#define TIMER_OC_MODE_HIGH ((uint16_t)0x0050U) /*!< force high mode */ +#define TIMER_OC_MODE_PWM0 ((uint16_t)0x0060U) /*!< PWM0 mode */ +#define TIMER_OC_MODE_PWM1 ((uint16_t)0x0070U) /*!< PWM1 mode*/ + +/* channel output compare shadow enable */ +#define TIMER_OC_SHADOW_ENABLE ((uint16_t)0x0008U) /*!< channel output shadow state enable */ +#define TIMER_OC_SHADOW_DISABLE ((uint16_t)0x0000U) /*!< channel output shadow state disable */ + +/* channel output compare fast enable */ +#define TIMER_OC_FAST_ENABLE ((uint16_t)0x0004) /*!< channel output fast function enable */ +#define TIMER_OC_FAST_DISABLE ((uint16_t)0x0000) /*!< channel output fast function disable */ + +/* channel output compare clear enable */ +#define TIMER_OC_CLEAR_ENABLE ((uint16_t)0x0080U) /*!< channel output clear function enable */ +#define TIMER_OC_CLEAR_DISABLE ((uint16_t)0x0000U) /*!< channel output clear function disable */ + +/* channel control shadow register update control */ +#define TIMER_UPDATECTL_CCU ((uint32_t)0x00000000U) /*!< the shadow registers update by when CMTG bit is set */ +#define TIMER_UPDATECTL_CCUTRI TIMER_CTL1_CCUC /*!< the shadow registers update by when CMTG bit is set or an rising edge of TRGI occurs */ + +/* channel input capture polarity */ +#define TIMER_IC_POLARITY_RISING ((uint16_t)0x0000U) /*!< input capture rising edge */ +#define TIMER_IC_POLARITY_FALLING ((uint16_t)0x0002U) /*!< input capture falling edge */ +#define TIMER_IC_POLARITY_BOTH_EDGE ((uint16_t)0x000AU) /*!< input capture both edge */ + +/* timer input capture selection */ +#define TIMER_IC_SELECTION_DIRECTTI ((uint16_t)0x0001U) /*!< channel y is configured as input and icy is mapped on CIy */ +#define TIMER_IC_SELECTION_INDIRECTTI ((uint16_t)0x0002U) /*!< channel y is configured as input and icy is mapped on opposite input */ +#define TIMER_IC_SELECTION_ITS ((uint16_t)0x0003U) /*!< channel y is configured as input and icy is mapped on ITS */ + +/* channel input capture prescaler */ +#define TIMER_IC_PSC_DIV1 ((uint16_t)0x0000U) /*!< no prescaler */ +#define TIMER_IC_PSC_DIV2 ((uint16_t)0x0004U) /*!< divided by 2 */ +#define TIMER_IC_PSC_DIV4 ((uint16_t)0x0008U) /*!< divided by 4 */ +#define TIMER_IC_PSC_DIV8 ((uint16_t)0x000CU) /*!< divided by 8 */ + +/* trigger selection */ +#define SMCFG_TRGSEL(regval) (BITS(4, 6) & ((uint32_t)(regval) << 4U)) +#define TIMER_SMCFG_TRGSEL_ITI0 SMCFG_TRGSEL(0) /*!< internal trigger 0 */ +#define TIMER_SMCFG_TRGSEL_ITI1 SMCFG_TRGSEL(1) /*!< internal trigger 1 */ +#define TIMER_SMCFG_TRGSEL_ITI2 SMCFG_TRGSEL(2) /*!< internal trigger 2 */ +#define TIMER_SMCFG_TRGSEL_ITI3 SMCFG_TRGSEL(3) /*!< internal trigger 3 */ +#define TIMER_SMCFG_TRGSEL_CI0F_ED SMCFG_TRGSEL(4) /*!< TI0 Edge Detector */ +#define TIMER_SMCFG_TRGSEL_CI0FE0 SMCFG_TRGSEL(5) /*!< filtered TIMER input 0 */ +#define TIMER_SMCFG_TRGSEL_CI1FE1 SMCFG_TRGSEL(6) /*!< filtered TIMER input 1 */ +#define TIMER_SMCFG_TRGSEL_ETIFP SMCFG_TRGSEL(7) /*!< external trigger */ + +/* master mode control */ +#define CTL1_MMC(regval) (BITS(4, 6) & ((uint32_t)(regval) << 4U)) +#define TIMER_TRI_OUT_SRC_RESET CTL1_MMC(0) /*!< the UPG bit as trigger output */ +#define TIMER_TRI_OUT_SRC_ENABLE CTL1_MMC(1) /*!< the counter enable signal TIMER_CTL0_CEN as trigger output */ +#define TIMER_TRI_OUT_SRC_UPDATE CTL1_MMC(2) /*!< update event as trigger output */ +#define TIMER_TRI_OUT_SRC_CH0 CTL1_MMC(3) /*!< a capture or a compare match occurred in channel 0 as trigger output TRGO */ +#define TIMER_TRI_OUT_SRC_O0CPRE CTL1_MMC(4) /*!< O0CPRE as trigger output */ +#define TIMER_TRI_OUT_SRC_O1CPRE CTL1_MMC(5) /*!< O1CPRE as trigger output */ +#define TIMER_TRI_OUT_SRC_O2CPRE CTL1_MMC(6) /*!< O2CPRE as trigger output */ +#define TIMER_TRI_OUT_SRC_O3CPRE CTL1_MMC(7) /*!< O3CPRE as trigger output */ + +/* slave mode control */ +#define SMCFG_SMC(regval) (BITS(0, 2) & ((uint32_t)(regval) << 0U)) +#define TIMER_SLAVE_MODE_DISABLE SMCFG_SMC(0) /*!< slave mode disable */ +#define TIMER_ENCODER_MODE0 SMCFG_SMC(1) /*!< encoder mode 0 */ +#define TIMER_ENCODER_MODE1 SMCFG_SMC(2) /*!< encoder mode 1 */ +#define TIMER_ENCODER_MODE2 SMCFG_SMC(3) /*!< encoder mode 2 */ +#define TIMER_SLAVE_MODE_RESTART SMCFG_SMC(4) /*!< restart mode */ +#define TIMER_SLAVE_MODE_PAUSE SMCFG_SMC(5) /*!< pause mode */ +#define TIMER_SLAVE_MODE_EVENT SMCFG_SMC(6) /*!< event mode */ +#define TIMER_SLAVE_MODE_EXTERNAL0 SMCFG_SMC(7) /*!< external clock mode 0 */ + +/* master slave mode selection */ +#define TIMER_MASTER_SLAVE_MODE_ENABLE TIMER_SMCFG_MSM /*!< master slave mode enable */ +#define TIMER_MASTER_SLAVE_MODE_DISABLE ((uint32_t)0x00000000U) /*!< master slave mode disable */ + +/* external trigger prescaler */ +#define SMCFG_ETPSC(regval) (BITS(12, 13) & ((uint32_t)(regval) << 12U)) +#define TIMER_EXT_TRI_PSC_OFF SMCFG_ETPSC(0) /*!< no divided */ +#define TIMER_EXT_TRI_PSC_DIV2 SMCFG_ETPSC(1) /*!< divided by 2 */ +#define TIMER_EXT_TRI_PSC_DIV4 SMCFG_ETPSC(2) /*!< divided by 4 */ +#define TIMER_EXT_TRI_PSC_DIV8 SMCFG_ETPSC(3) /*!< divided by 8 */ + +/* external trigger polarity */ +#define TIMER_ETP_FALLING TIMER_SMCFG_ETP /*!< active low or falling edge active */ +#define TIMER_ETP_RISING ((uint32_t)0x00000000U) /*!< active high or rising edge active */ + +/* channel 0 trigger input selection */ +#define TIMER_HALLINTERFACE_ENABLE TIMER_CTL1_TI0S /*!< TIMER hall sensor mode enable */ +#define TIMER_HALLINTERFACE_DISABLE ((uint32_t)0x00000000U) /*!< TIMER hall sensor mode disable */ + +/* TIMERx(x=0..4,7..13) write CHxVAL register selection */ +#define TIMER_CHVSEL_ENABLE ((uint16_t)TIMER_CFG_OUTSEL) /*!< write CHxVAL register selection enable */ +#define TIMER_CHVSEL_DISABLE ((uint16_t)0x0000U) /*!< write CHxVAL register selection disable */ + +/* function declarations */ +/* TIMER timebase */ +/* deinit a TIMER */ +void timer_deinit(uint32_t timer_periph); +/* initialize TIMER init parameter struct */ +void timer_struct_para_init(timer_parameter_struct* initpara); +/* initialize TIMER counter */ +void timer_init(uint32_t timer_periph, timer_parameter_struct* initpara); +/* enable a TIMER */ +void timer_enable(uint32_t timer_periph); +/* disable a TIMER */ +void timer_disable(uint32_t timer_periph); +/* enable the auto reload shadow function */ +void timer_auto_reload_shadow_enable(uint32_t timer_periph); +/* disable the auto reload shadow function */ +void timer_auto_reload_shadow_disable(uint32_t timer_periph); +/* enable the update event */ +void timer_update_event_enable(uint32_t timer_periph); +/* disable the update event */ +void timer_update_event_disable(uint32_t timer_periph); +/* set TIMER counter alignment mode */ +void timer_counter_alignment(uint32_t timer_periph, uint16_t aligned); +/* set TIMER counter up direction */ +void timer_counter_up_direction(uint32_t timer_periph); +/* set TIMER counter down direction */ +void timer_counter_down_direction(uint32_t timer_periph); +/* configure TIMER prescaler */ +void timer_prescaler_config(uint32_t timer_periph, uint16_t prescaler, uint32_t pscreload); +/* configure TIMER repetition register value */ +void timer_repetition_value_config(uint32_t timer_periph, uint16_t repetition); +/* configure TIMER autoreload register value */ +void timer_autoreload_value_config(uint32_t timer_periph, uint32_t autoreload); +/* configure TIMER counter register value */ +void timer_counter_value_config(uint32_t timer_periph, uint32_t counter); +/* read TIMER counter value */ +uint32_t timer_counter_read(uint32_t timer_periph); +/* read TIMER prescaler value */ +uint16_t timer_prescaler_read(uint32_t timer_periph); +/* configure TIMER single pulse mode */ +void timer_single_pulse_mode_config(uint32_t timer_periph, uint32_t spmode); +/* configure TIMER update source */ +void timer_update_source_config(uint32_t timer_periph, uint32_t update); + +/* timer DMA and event */ +/* enable the TIMER DMA */ +void timer_dma_enable(uint32_t timer_periph, uint16_t dma); +/* disable the TIMER DMA */ +void timer_dma_disable(uint32_t timer_periph, uint16_t dma); +/* channel DMA request source selection */ +void timer_channel_dma_request_source_select(uint32_t timer_periph, uint32_t dma_request); +/* configure the TIMER DMA transfer */ +void timer_dma_transfer_config(uint32_t timer_periph, uint32_t dma_baseaddr, uint32_t dma_lenth); +/* software generate events */ +void timer_event_software_generate(uint32_t timer_periph, uint16_t event); + +/* TIMER channel complementary protection */ +/* initialize TIMER break parameter struct */ +void timer_break_struct_para_init(timer_break_parameter_struct* breakpara); +/* configure TIMER break function */ +void timer_break_config(uint32_t timer_periph, timer_break_parameter_struct* breakpara); +/* enable TIMER break function */ +void timer_break_enable(uint32_t timer_periph); +/* disable TIMER break function */ +void timer_break_disable(uint32_t timer_periph); +/* enable TIMER output automatic function */ +void timer_automatic_output_enable(uint32_t timer_periph); +/* disable TIMER output automatic function */ +void timer_automatic_output_disable(uint32_t timer_periph); +/* enable or disable TIMER primary output function */ +void timer_primary_output_config(uint32_t timer_periph, ControlStatus newvalue); +/* enable or disable channel capture/compare control shadow register */ +void timer_channel_control_shadow_config(uint32_t timer_periph, ControlStatus newvalue); +/* configure TIMER channel control shadow register update control */ +void timer_channel_control_shadow_update_config(uint32_t timer_periph, uint32_t ccuctl); + +/* TIMER channel output */ +/* initialize TIMER channel output parameter struct */ +void timer_channel_output_struct_para_init(timer_oc_parameter_struct* ocpara); +/* configure TIMER channel output function */ +void timer_channel_output_config(uint32_t timer_periph, uint16_t channel, timer_oc_parameter_struct* ocpara); +/* configure TIMER channel output compare mode */ +void timer_channel_output_mode_config(uint32_t timer_periph, uint16_t channel, uint16_t ocmode); +/* configure TIMER channel output pulse value */ +void timer_channel_output_pulse_value_config(uint32_t timer_periph, uint16_t channel, uint32_t pulse); +/* configure TIMER channel output shadow function */ +void timer_channel_output_shadow_config(uint32_t timer_periph, uint16_t channel, uint16_t ocshadow); +/* configure TIMER channel output fast function */ +void timer_channel_output_fast_config(uint32_t timer_periph, uint16_t channel, uint16_t ocfast); +/* configure TIMER channel output clear function */ +void timer_channel_output_clear_config(uint32_t timer_periph, uint16_t channel, uint16_t occlear); +/* configure TIMER channel output polarity */ +void timer_channel_output_polarity_config(uint32_t timer_periph, uint16_t channel, uint16_t ocpolarity); +/* configure TIMER channel complementary output polarity */ +void timer_channel_complementary_output_polarity_config(uint32_t timer_periph, uint16_t channel, uint16_t ocnpolarity); +/* configure TIMER channel enable state */ +void timer_channel_output_state_config(uint32_t timer_periph, uint16_t channel, uint32_t state); +/* configure TIMER channel complementary output enable state */ +void timer_channel_complementary_output_state_config(uint32_t timer_periph, uint16_t channel, uint16_t ocnstate); + +/* TIMER channel input */ +/* initialize TIMER channel input parameter struct */ +void timer_channel_input_struct_para_init(timer_ic_parameter_struct* icpara); +/* configure TIMER input capture parameter */ +void timer_input_capture_config(uint32_t timer_periph, uint16_t channel, timer_ic_parameter_struct* icpara); +/* configure TIMER channel input capture prescaler value */ +void timer_channel_input_capture_prescaler_config(uint32_t timer_periph, uint16_t channel, uint16_t prescaler); +/* read TIMER channel capture compare register value */ +uint32_t timer_channel_capture_value_register_read(uint32_t timer_periph, uint16_t channel); +/* configure TIMER input pwm capture function */ +void timer_input_pwm_capture_config(uint32_t timer_periph, uint16_t channel, timer_ic_parameter_struct* icpwm); +/* configure TIMER hall sensor mode */ +void timer_hall_mode_config(uint32_t timer_periph, uint32_t hallmode); + +/* TIMER master and slave */ +/* select TIMER input trigger source */ +void timer_input_trigger_source_select(uint32_t timer_periph, uint32_t intrigger); +/* select TIMER master mode output trigger source */ +void timer_master_output_trigger_source_select(uint32_t timer_periph, uint32_t outrigger); +/* select TIMER slave mode */ +void timer_slave_mode_select(uint32_t timer_periph, uint32_t slavemode); +/* configure TIMER master slave mode */ +void timer_master_slave_mode_config(uint32_t timer_periph, uint32_t masterslave); +/* configure TIMER external trigger input */ +void timer_external_trigger_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter); +/* configure TIMER quadrature decoder mode */ +void timer_quadrature_decoder_mode_config(uint32_t timer_periph, uint32_t decomode, uint16_t ic0polarity, uint16_t ic1polarity); +/* configure TIMER internal clock mode */ +void timer_internal_clock_config(uint32_t timer_periph); +/* configure TIMER the internal trigger as external clock input */ +void timer_internal_trigger_as_external_clock_config(uint32_t timer_periph, uint32_t intrigger); +/* configure TIMER the external trigger as external clock input */ +void timer_external_trigger_as_external_clock_config(uint32_t timer_periph, uint32_t extrigger, uint16_t extpolarity, uint32_t extfilter); +/* configure TIMER the external clock mode 0 */ +void timer_external_clock_mode0_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter); +/* configure TIMER the external clock mode 1 */ +void timer_external_clock_mode1_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter); +/* disable TIMER the external clock mode 1 */ +void timer_external_clock_mode1_disable(uint32_t timer_periph); + +/* TIMER interrupt and flag */ +/* enable the TIMER interrupt */ +void timer_interrupt_enable(uint32_t timer_periph, uint32_t interrupt); +/* disable the TIMER interrupt */ +void timer_interrupt_disable(uint32_t timer_periph, uint32_t interrupt); +/* get TIMER interrupt flag */ +FlagStatus timer_interrupt_flag_get(uint32_t timer_periph, uint32_t interrupt); +/* clear TIMER interrupt flag */ +void timer_interrupt_flag_clear(uint32_t timer_periph, uint32_t interrupt); +/* get TIMER flag */ +FlagStatus timer_flag_get(uint32_t timer_periph, uint32_t flag); +/* clear TIMER flag */ +void timer_flag_clear(uint32_t timer_periph, uint32_t flag); + +#endif /* GD32E10X_TIMER_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_usart.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_usart.h new file mode 100644 index 0000000000000000000000000000000000000000..b0af23732f4ec8771e826ad8377bc935076fa3bb --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_usart.h @@ -0,0 +1,378 @@ +/*! + \file gd32f10x_usart.h + \brief definitions for the USART + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.1, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_USART_H +#define GD32F10X_USART_H + +#include "gd32f10x.h" + +/* USARTx(x=0,1,2)/UARTx(x=3,4) definitions */ +#define USART1 USART_BASE /*!< USART1 base address */ +#define USART2 (USART_BASE+(0x00000400U)) /*!< USART2 base address */ +#define UART3 (USART_BASE+(0x00000800U)) /*!< UART3 base address */ +#define UART4 (USART_BASE+(0x00000C00U)) /*!< UART4 base address */ +#define USART0 (USART_BASE+(0x0000F400U)) /*!< USART0 base address */ + +/* registers definitions */ +#define USART_STAT(usartx) REG32((usartx) + (0x00000000U)) /*!< USART status register */ +#define USART_DATA(usartx) REG32((usartx) + (0x00000004U)) /*!< USART data register */ +#define USART_BAUD(usartx) REG32((usartx) + (0x00000008U)) /*!< USART baud rate register */ +#define USART_CTL0(usartx) REG32((usartx) + (0x0000000CU)) /*!< USART control register 0 */ +#define USART_CTL1(usartx) REG32((usartx) + (0x00000010U)) /*!< USART control register 1 */ +#define USART_CTL2(usartx) REG32((usartx) + (0x00000014U)) /*!< USART control register 2 */ +#define USART_GP(usartx) REG32((usartx) + (0x00000018U)) /*!< USART guard time and prescaler register */ + +/* bits definitions */ +/* USARTx_STAT */ +#define USART_STAT_PERR BIT(0) /*!< parity error flag */ +#define USART_STAT_FERR BIT(1) /*!< frame error flag */ +#define USART_STAT_NERR BIT(2) /*!< noise error flag */ +#define USART_STAT_ORERR BIT(3) /*!< overrun error */ +#define USART_STAT_IDLEF BIT(4) /*!< IDLE frame detected flag */ +#define USART_STAT_RBNE BIT(5) /*!< read data buffer not empty */ +#define USART_STAT_TC BIT(6) /*!< transmission complete */ +#define USART_STAT_TBE BIT(7) /*!< transmit data buffer empty */ +#define USART_STAT_LBDF BIT(8) /*!< LIN break detected flag */ +#define USART_STAT_CTSF BIT(9) /*!< CTS change flag */ + +/* USARTx_DATA */ +#define USART_DATA_DATA BITS(0,8) /*!< transmit or read data value */ + +/* USARTx_BAUD */ +#define USART_BAUD_FRADIV BITS(0,3) /*!< fraction part of baud-rate divider */ +#define USART_BAUD_INTDIV BITS(4,15) /*!< integer part of baud-rate divider */ + +/* USARTx_CTL0 */ +#define USART_CTL0_SBKCMD BIT(0) /*!< send break command */ +#define USART_CTL0_RWU BIT(1) /*!< receiver wakeup from mute mode */ +#define USART_CTL0_REN BIT(2) /*!< receiver enable */ +#define USART_CTL0_TEN BIT(3) /*!< transmitter enable */ +#define USART_CTL0_IDLEIE BIT(4) /*!< idle line detected interrupt enable */ +#define USART_CTL0_RBNEIE BIT(5) /*!< read data buffer not empty interrupt and overrun error interrupt enable */ +#define USART_CTL0_TCIE BIT(6) /*!< transmission complete interrupt enable */ +#define USART_CTL0_TBEIE BIT(7) /*!< transmitter buffer empty interrupt enable */ +#define USART_CTL0_PERRIE BIT(8) /*!< parity error interrupt enable */ +#define USART_CTL0_PM BIT(9) /*!< parity mode */ +#define USART_CTL0_PCEN BIT(10) /*!< parity check function enable */ +#define USART_CTL0_WM BIT(11) /*!< wakeup method in mute mode */ +#define USART_CTL0_WL BIT(12) /*!< word length */ +#define USART_CTL0_UEN BIT(13) /*!< USART enable */ + +/* USARTx_CTL1 */ +#define USART_CTL1_ADDR BITS(0,3) /*!< address of USART */ +#define USART_CTL1_LBLEN BIT(5) /*!< LIN break frame length */ +#define USART_CTL1_LBDIE BIT(6) /*!< LIN break detected interrupt eanble */ +#define USART_CTL1_CLEN BIT(8) /*!< CK length */ +#define USART_CTL1_CPH BIT(9) /*!< CK phase */ +#define USART_CTL1_CPL BIT(10) /*!< CK polarity */ +#define USART_CTL1_CKEN BIT(11) /*!< CK pin enable */ +#define USART_CTL1_STB BITS(12,13) /*!< STOP bits length */ +#define USART_CTL1_LMEN BIT(14) /*!< LIN mode enable */ + +/* USARTx_CTL2 */ +#define USART_CTL2_ERRIE BIT(0) /*!< error interrupt enable */ +#define USART_CTL2_IREN BIT(1) /*!< IrDA mode enable */ +#define USART_CTL2_IRLP BIT(2) /*!< IrDA low-power */ +#define USART_CTL2_HDEN BIT(3) /*!< half-duplex enable */ +#define USART_CTL2_NKEN BIT(4) /*!< NACK enable in smartcard mode */ +#define USART_CTL2_SCEN BIT(5) /*!< smartcard mode enable */ +#define USART_CTL2_DENR BIT(6) /*!< DMA request enable for reception */ +#define USART_CTL2_DENT BIT(7) /*!< DMA request enable for transmission */ +#define USART_CTL2_RTSEN BIT(8) /*!< RTS enable */ +#define USART_CTL2_CTSEN BIT(9) /*!< CTS enable */ +#define USART_CTL2_CTSIE BIT(10) /*!< CTS interrupt enable */ + +/* USARTx_GP */ +#define USART_GP_PSC BITS(0,7) /*!< prescaler value for dividing the system clock */ +#define USART_GP_GUAT BITS(8,15) /*!< guard time value in smartcard mode */ + +/* constants definitions */ +/* define the USART bit position and its register index offset */ +#define USART_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)) +#define USART_REG_VAL(usartx, offset) (REG32((usartx) + (((uint32_t)(offset) & (0x0000FFFFU)) >> 6))) +#define USART_BIT_POS(val) ((uint32_t)(val) & (0x0000001FU)) +#define USART_REGIDX_BIT2(regidx, bitpos, regidx2, bitpos2) (((uint32_t)(regidx2) << 22) | (uint32_t)((bitpos2) << 16)\ + | (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos))) +#define USART_REG_VAL2(usartx, offset) (REG32((usartx) + ((uint32_t)(offset) >> 22))) +#define USART_BIT_POS2(val) (((uint32_t)(val) & (0x001F0000U)) >> 16) + +/* register offset */ +#define USART_STAT_REG_OFFSET (0x00000000U) /*!< STAT register offset */ +#define USART_CTL0_REG_OFFSET (0x0000000CU) /*!< CTL0 register offset */ +#define USART_CTL1_REG_OFFSET (0x00000010U) /*!< CTL1 register offset */ +#define USART_CTL2_REG_OFFSET (0x00000014U) /*!< CTL2 register offset */ + +/* USART flags */ +typedef enum +{ + /* flags in STAT register */ + USART_FLAG_CTSF = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 9U), /*!< CTS change flag */ + USART_FLAG_LBDF = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 8U), /*!< LIN break detected flag */ + USART_FLAG_TBE = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 7U), /*!< transmit data buffer empty */ + USART_FLAG_TC = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 6U), /*!< transmission complete */ + USART_FLAG_RBNE = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 5U), /*!< read data buffer not empty */ + USART_FLAG_IDLEF = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 4U), /*!< IDLE frame detected flag */ + USART_FLAG_ORERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 3U), /*!< overrun error */ + USART_FLAG_NERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 2U), /*!< noise error flag */ + USART_FLAG_FERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 1U), /*!< frame error flag */ + USART_FLAG_PERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 0U), /*!< parity error flag */ +}usart_flag_enum; + +/* USART interrupt flags */ +typedef enum +{ + /* interrupt flags in CTL0 register */ + USART_INT_FLAG_PERR = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 8U, USART_STAT_REG_OFFSET, 0U), /*!< parity error interrupt and flag */ + USART_INT_FLAG_TBE = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 7U, USART_STAT_REG_OFFSET, 7U), /*!< transmitter buffer empty interrupt and flag */ + USART_INT_FLAG_TC = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 6U, USART_STAT_REG_OFFSET, 6U), /*!< transmission complete interrupt and flag */ + USART_INT_FLAG_RBNE = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 5U, USART_STAT_REG_OFFSET, 5U), /*!< read data buffer not empty interrupt and flag */ + USART_INT_FLAG_RBNE_ORERR = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 5U, USART_STAT_REG_OFFSET, 3U), /*!< read data buffer not empty interrupt and overrun error flag */ + USART_INT_FLAG_IDLE = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 4U, USART_STAT_REG_OFFSET, 4U), /*!< IDLE line detected interrupt and flag */ + /* interrupt flags in CTL1 register */ + USART_INT_FLAG_LBD = USART_REGIDX_BIT2(USART_CTL1_REG_OFFSET, 6U, USART_STAT_REG_OFFSET, 8U), /*!< LIN break detected interrupt and flag */ + /* interrupt flags in CTL2 register */ + USART_INT_FLAG_CTS = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 10U, USART_STAT_REG_OFFSET, 9U), /*!< CTS interrupt and flag */ + USART_INT_FLAG_ERR_ORERR = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 0U, USART_STAT_REG_OFFSET, 3U), /*!< error interrupt and overrun error */ + USART_INT_FLAG_ERR_NERR = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 0U, USART_STAT_REG_OFFSET, 2U), /*!< error interrupt and noise error flag */ + USART_INT_FLAG_ERR_FERR = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 0U, USART_STAT_REG_OFFSET, 1U), /*!< error interrupt and frame error flag */ +}usart_interrupt_flag_enum; + +/* USART interrupt enable or disable */ +typedef enum +{ + /* interrupt in CTL0 register */ + USART_INT_PERR = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 8U), /*!< parity error interrupt */ + USART_INT_TBE = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 7U), /*!< transmitter buffer empty interrupt */ + USART_INT_TC = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 6U), /*!< transmission complete interrupt */ + USART_INT_RBNE = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 5U), /*!< read data buffer not empty interrupt and overrun error interrupt */ + USART_INT_IDLE = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 4U), /*!< IDLE line detected interrupt */ + /* interrupt in CTL1 register */ + USART_INT_LBD = USART_REGIDX_BIT(USART_CTL1_REG_OFFSET, 6U), /*!< LIN break detected interrupt */ + /* interrupt in CTL2 register */ + USART_INT_CTS = USART_REGIDX_BIT(USART_CTL2_REG_OFFSET, 10U), /*!< CTS interrupt */ + USART_INT_ERR = USART_REGIDX_BIT(USART_CTL2_REG_OFFSET, 0U), /*!< error interrupt */ +}usart_interrupt_enum; + +/* USART receiver configure */ +#define CTL0_REN(regval) (BIT(2) & ((uint32_t)(regval) << 2)) +#define USART_RECEIVE_ENABLE CTL0_REN(1) /*!< enable receiver */ +#define USART_RECEIVE_DISABLE CTL0_REN(0) /*!< disable receiver */ + +/* USART transmitter configure */ +#define CTL0_TEN(regval) (BIT(3) & ((uint32_t)(regval) << 3)) +#define USART_TRANSMIT_ENABLE CTL0_TEN(1) /*!< enable transmitter */ +#define USART_TRANSMIT_DISABLE CTL0_TEN(0) /*!< disable transmitter */ + +/* USART parity bits definitions */ +#define CTL0_PM(regval) (BITS(9,10) & ((uint32_t)(regval) << 9)) +#define USART_PM_NONE CTL0_PM(0) /*!< no parity */ +#define USART_PM_EVEN CTL0_PM(2) /*!< even parity */ +#define USART_PM_ODD CTL0_PM(3) /*!< odd parity */ + +/* USART wakeup method in mute mode */ +#define CTL0_WM(regval) (BIT(11) & ((uint32_t)(regval) << 11)) +#define USART_WM_IDLE CTL0_WM(0) /*!< idle line */ +#define USART_WM_ADDR CTL0_WM(1) /*!< address match */ + +/* USART word length definitions */ +#define CTL0_WL(regval) (BIT(12) & ((uint32_t)(regval) << 12)) +#define USART_WL_8BIT CTL0_WL(0) /*!< 8 bits */ +#define USART_WL_9BIT CTL0_WL(1) /*!< 9 bits */ + +/* USART stop bits definitions */ +#define CTL1_STB(regval) (BITS(12,13) & ((uint32_t)(regval) << 12)) +#define USART_STB_1BIT CTL1_STB(0) /*!< 1 bit */ +#define USART_STB_0_5BIT CTL1_STB(1) /*!< 0.5 bit */ +#define USART_STB_2BIT CTL1_STB(2) /*!< 2 bits */ +#define USART_STB_1_5BIT CTL1_STB(3) /*!< 1.5 bits */ + +/* USART LIN break frame length */ +#define CTL1_LBLEN(regval) (BIT(5) & ((uint32_t)(regval) << 5)) +#define USART_LBLEN_10B CTL1_LBLEN(0) /*!< 10 bits */ +#define USART_LBLEN_11B CTL1_LBLEN(1) /*!< 11 bits */ + +/* USART CK length */ +#define CTL1_CLEN(regval) (BIT(8) & ((uint32_t)(regval) << 8)) +#define USART_CLEN_NONE CTL1_CLEN(0) /*!< there are 7 CK pulses for an 8 bit frame and 8 CK pulses for a 9 bit frame */ +#define USART_CLEN_EN CTL1_CLEN(1) /*!< there are 8 CK pulses for an 8 bit frame and 9 CK pulses for a 9 bit frame */ + +/* USART clock phase */ +#define CTL1_CPH(regval) (BIT(9) & ((uint32_t)(regval) << 9)) +#define USART_CPH_1CK CTL1_CPH(0) /*!< first clock transition is the first data capture edge */ +#define USART_CPH_2CK CTL1_CPH(1) /*!< second clock transition is the first data capture edge */ + +/* USART clock polarity */ +#define CTL1_CPL(regval) (BIT(10) & ((uint32_t)(regval) << 10)) +#define USART_CPL_LOW CTL1_CPL(0) /*!< steady low value on CK pin */ +#define USART_CPL_HIGH CTL1_CPL(1) /*!< steady high value on CK pin */ + +/* USART DMA request for receive configure */ +#define CLT2_DENR(regval) (BIT(6) & ((uint32_t)(regval) << 6)) +#define USART_DENR_ENABLE CLT2_DENR(1) /*!< DMA request enable for reception */ +#define USART_DENR_DISABLE CLT2_DENR(0) /*!< DMA request disable for reception */ + +/* USART DMA request for transmission configure */ +#define CLT2_DENT(regval) (BIT(7) & ((uint32_t)(regval) << 7)) +#define USART_DENT_ENABLE CLT2_DENT(1) /*!< DMA request enable for transmission */ +#define USART_DENT_DISABLE CLT2_DENT(0) /*!< DMA request disable for transmission */ + +/* USART RTS configure */ +#define CLT2_RTSEN(regval) (BIT(8) & ((uint32_t)(regval) << 8)) +#define USART_RTS_ENABLE CLT2_RTSEN(1) /*!< RTS enable */ +#define USART_RTS_DISABLE CLT2_RTSEN(0) /*!< RTS disable */ + +/* USART CTS configure */ +#define CLT2_CTSEN(regval) (BIT(9) & ((uint32_t)(regval) << 9)) +#define USART_CTS_ENABLE CLT2_CTSEN(1) /*!< CTS enable */ +#define USART_CTS_DISABLE CLT2_CTSEN(0) /*!< CTS disable */ + +/* USART IrDA low-power enable */ +#define CTL2_IRLP(regval) (BIT(2) & ((uint32_t)(regval) << 2)) +#define USART_IRLP_LOW CTL2_IRLP(1) /*!< low-power */ +#define USART_IRLP_NORMAL CTL2_IRLP(0) /*!< normal */ + +/* function declarations */ +/* initialization functions */ +/* reset USART */ +void usart_deinit(uint32_t usart_periph); +/* configure USART baud rate value */ +void usart_baudrate_set(uint32_t usart_periph, uint32_t baudval); +/* configure USART parity function */ +void usart_parity_config(uint32_t usart_periph, uint32_t paritycfg); +/* configure USART word length */ +void usart_word_length_set(uint32_t usart_periph, uint32_t wlen); +/* configure USART stop bit length */ +void usart_stop_bit_set(uint32_t usart_periph, uint32_t stblen); + +/* USART normal mode communication */ +/* enable USART */ +void usart_enable(uint32_t usart_periph); +/* disable USART */ +void usart_disable(uint32_t usart_periph); +/* configure USART transmitter */ +void usart_transmit_config(uint32_t usart_periph, uint32_t txconfig); +/* configure USART receiver */ +void usart_receive_config(uint32_t usart_periph, uint32_t rxconfig); +/* USART transmit data function */ +void usart_data_transmit(uint32_t usart_periph, uint32_t data); +/* USART receive data function */ +uint16_t usart_data_receive(uint32_t usart_periph); + +/* multi-processor communication */ +/* configure address of the USART */ +void usart_address_config(uint32_t usart_periph, uint8_t addr); +/* enable mute mode */ +void usart_mute_mode_enable(uint32_t usart_periph); +/* disable mute mode */ +void usart_mute_mode_disable(uint32_t usart_periph); +/* configure wakeup method in mute mode */ +void usart_mute_mode_wakeup_config(uint32_t usart_periph, uint32_t wmethod); + +/* LIN mode communication */ +/* LIN mode enable */ +void usart_lin_mode_enable(uint32_t usart_periph); +/* LIN mode disable */ +void usart_lin_mode_disable(uint32_t usart_periph); +/* LIN break detection length */ +void usart_lin_break_detection_length_config(uint32_t usart_periph, uint32_t lblen); +/* send break frame */ +void usart_send_break(uint32_t usart_periph); + +/* half-duplex communication */ +/* half-duplex enable */ +void usart_halfduplex_enable(uint32_t usart_periph); +/* half-duplex disable */ +void usart_halfduplex_disable(uint32_t usart_periph); + +/* synchronous communication */ +/* clock enable */ +void usart_synchronous_clock_enable(uint32_t usart_periph); +/* clock disable */ +void usart_synchronous_clock_disable(uint32_t usart_periph); +/* configure usart synchronous mode parameters */ +void usart_synchronous_clock_config(uint32_t usart_periph, uint32_t clen, uint32_t cph, uint32_t cpl); + +/* smartcard communication */ +/* guard time value configure in smartcard mode */ +void usart_guard_time_config(uint32_t usart_periph,uint32_t gaut); +/* smartcard mode enable */ +void usart_smartcard_mode_enable(uint32_t usart_periph); +/* smartcard mode disable */ +void usart_smartcard_mode_disable(uint32_t usart_periph); +/* NACK enable in smartcard mode */ +void usart_smartcard_mode_nack_enable(uint32_t usart_periph); +/* NACK disable in smartcard mode */ +void usart_smartcard_mode_nack_disable(uint32_t usart_periph); + +/* IrDA communication */ +/* enable IrDA mode */ +void usart_irda_mode_enable(uint32_t usart_periph); +/* disable IrDA mode */ +void usart_irda_mode_disable(uint32_t usart_periph); +/* configure the peripheral clock prescaler */ +void usart_prescaler_config(uint32_t usart_periph, uint8_t psc); +/* configure IrDA low-power */ +void usart_irda_lowpower_config(uint32_t usart_periph, uint32_t irlp); + +/* hardware flow communication */ +/* configure hardware flow control RTS */ +void usart_hardware_flow_rts_config(uint32_t usart_periph, uint32_t rtsconfig); +/* configure hardware flow control CTS */ +void usart_hardware_flow_cts_config(uint32_t usart_periph, uint32_t ctsconfig); + +/* configure USART DMA for reception */ +void usart_dma_receive_config(uint32_t usart_periph, uint32_t dmacmd); +/* configure USART DMA for transmission */ +void usart_dma_transmit_config(uint32_t usart_periph, uint32_t dmacmd); + +/* flag functions */ +/* get flag in STAT register */ +FlagStatus usart_flag_get(uint32_t usart_periph, usart_flag_enum flag); +/* clear flag in STAT register */ +void usart_flag_clear(uint32_t usart_periph, usart_flag_enum flag); + +/* interrupt functions */ +/* enable USART interrupt */ +void usart_interrupt_enable(uint32_t usart_periph, uint32_t int_flag); +/* disable USART interrupt */ +void usart_interrupt_disable(uint32_t usart_periph, uint32_t int_flag); +/* get USART interrupt and flag status */ +FlagStatus usart_interrupt_flag_get(uint32_t usart_periph, uint32_t int_flag); +/* clear interrupt flag in STAT register */ +void usart_interrupt_flag_clear(uint32_t usart_periph, uint32_t flag); +#endif /* GD32F10X_USART_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_wwdgt.h b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_wwdgt.h new file mode 100644 index 0000000000000000000000000000000000000000..c548139baa5772ebba3753e5aaeb43bde9b91a55 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Include/gd32f10x_wwdgt.h @@ -0,0 +1,90 @@ +/*! + \file gd32f10x_wwdgt.h + \brief definitions for the WWDGT + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_WWDGT_H +#define GD32F10X_WWDGT_H + +#include "gd32f10x.h" + +/* WWDGT definitions */ +#define WWDGT WWDGT_BASE /*!< WWDGT base address */ + +/* registers definitions */ +#define WWDGT_CTL REG32((WWDGT) + 0x00U) /*!< WWDGT control register */ +#define WWDGT_CFG REG32((WWDGT) + 0x04U) /*!< WWDGT configuration register */ +#define WWDGT_STAT REG32((WWDGT) + 0x08U) /*!< WWDGT status register */ + +/* bits definitions */ +/* WWDGT_CTL */ +#define WWDGT_CTL_CNT BITS(0,6) /*!< WWDGT counter value */ +#define WWDGT_CTL_WDGTEN BIT(7) /*!< WWDGT counter enable */ + +/* WWDGT_CFG */ +#define WWDGT_CFG_WIN BITS(0,6) /*!< WWDGT counter window value */ +#define WWDGT_CFG_PSC BITS(7,8) /*!< WWDGT prescaler divider value */ +#define WWDGT_CFG_EWIE BIT(9) /*!< early wakeup interrupt enable */ + +/* WWDGT_STAT */ +#define WWDGT_STAT_EWIF BIT(0) /*!< early wakeup interrupt flag */ + +/* constants definitions */ +#define CFG_PSC(regval) (BITS(7,8) & ((uint32_t)(regval) << 7)) /*!< write value to WWDGT_CFG_PSC bit field */ +#define WWDGT_CFG_PSC_DIV1 CFG_PSC(0) /*!< the time base of WWDGT = (PCLK1/4096)/1 */ +#define WWDGT_CFG_PSC_DIV2 CFG_PSC(1) /*!< the time base of WWDGT = (PCLK1/4096)/2 */ +#define WWDGT_CFG_PSC_DIV4 CFG_PSC(2) /*!< the time base of WWDGT = (PCLK1/4096)/4 */ +#define WWDGT_CFG_PSC_DIV8 CFG_PSC(3) /*!< the time base of WWDGT = (PCLK1/4096)/8 */ + +/* function declarations */ +/* reset the window watchdog timer configuration */ +void wwdgt_deinit(void); +/* start the window watchdog timer counter */ +void wwdgt_enable(void); + +/* configure the window watchdog timer counter value */ +void wwdgt_counter_update(uint16_t counter_value); +/* configure counter value, window value, and prescaler divider value */ +void wwdgt_config(uint16_t counter, uint16_t window, uint32_t prescaler); + +/* enable early wakeup interrupt of WWDGT */ +void wwdgt_interrupt_enable(void); +/* check early wakeup interrupt state of WWDGT */ +FlagStatus wwdgt_flag_get(void); +/* clear early wakeup interrupt state of WWDGT */ +void wwdgt_flag_clear(void); + +#endif /* GD32F10X_WWDGT_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_adc.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_adc.c new file mode 100644 index 0000000000000000000000000000000000000000..ab628288bf6e8882bebb0224a8d454a58d23192b --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_adc.c @@ -0,0 +1,933 @@ +/*! + \file gd32f10x_adc.c + \brief ADC driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_adc.h" + +/* discontinuous mode macro*/ +#define ADC_CHANNEL_LENGTH_SUBTRACT_ONE ((uint8_t)1U) + +/* ADC regular channel macro */ +#define ADC_REGULAR_CHANNEL_RANK_SIX ((uint8_t)6U) +#define ADC_REGULAR_CHANNEL_RANK_TWELVE ((uint8_t)12U) +#define ADC_REGULAR_CHANNEL_RANK_SIXTEEN ((uint8_t)16U) +#define ADC_REGULAR_CHANNEL_RANK_LENGTH ((uint8_t)5U) + +/* ADC sampling time macro */ +#define ADC_CHANNEL_SAMPLE_TEN ((uint8_t)10U) +#define ADC_CHANNEL_SAMPLE_EIGHTEEN ((uint8_t)18U) +#define ADC_CHANNEL_SAMPLE_LENGTH ((uint8_t)3U) + +/* ADC inserted channel macro */ +#define ADC_INSERTED_CHANNEL_RANK_LENGTH ((uint8_t)5U) +#define ADC_INSERTED_CHANNEL_SHIFT_LENGTH ((uint8_t)15U) + +/* ADC inserted channel offset macro */ +#define ADC_OFFSET_LENGTH ((uint8_t)3U) +#define ADC_OFFSET_SHIFT_LENGTH ((uint8_t)4U) + +/*! + \brief reset ADC + \param[in] adc_periph: ADCx, x=0,1,2 + \param[out] none + \retval none +*/ +void adc_deinit(uint32_t adc_periph) +{ + switch(adc_periph){ + case ADC0: + /* reset ADC0 */ + rcu_periph_reset_enable(RCU_ADC0RST); + rcu_periph_reset_disable(RCU_ADC0RST); + break; + case ADC1: + /* reset ADC1 */ + rcu_periph_reset_enable(RCU_ADC1RST); + rcu_periph_reset_disable(RCU_ADC1RST); + break; +#ifndef GD32F10X_CL + case ADC2: + rcu_periph_reset_enable(RCU_ADC2RST); + rcu_periph_reset_disable(RCU_ADC2RST); + break; +#endif /* GD32F10X_CL */ + default: + break; + } +} + +/*! + \brief configure the ADC sync mode + \param[in] mode: ADC mode + only one parameter can be selected which is shown as below: + \arg ADC_MODE_FREE: all the ADCs work independently + \arg ADC_DAUL_REGULAL_PARALLEL_INSERTED_PARALLEL: ADC0 and ADC1 work in combined regular parallel + inserted parallel mode + \arg ADC_DAUL_REGULAL_PARALLEL_INSERTED_ROTATION: ADC0 and ADC1 work in combined regular parallel + trigger rotation mode + \arg ADC_DAUL_INSERTED_PARALLEL_REGULAL_FOLLOWUP_FAST: ADC0 and ADC1 work in combined inserted parallel + follow-up fast mode + \arg ADC_DAUL_INSERTED_PARALLEL_REGULAL_FOLLOWUP_SLOW: ADC0 and ADC1 work in combined inserted parallel + follow-up slow mode + \arg ADC_DAUL_INSERTED_PARALLEL: ADC0 and ADC1 work in inserted parallel mode only + \arg ADC_DAUL_REGULAL_PARALLEL: ADC0 and ADC1 work in regular parallel mode only + \arg ADC_DAUL_REGULAL_FOLLOWUP_FAST: ADC0 and ADC1 work in follow-up fast mode only + \arg ADC_DAUL_REGULAL_FOLLOWUP_SLOW: ADC0 and ADC1 work in follow-up slow mode only + \arg ADC_DAUL_INSERTED_TRIGGER_ROTATION: ADC0 and ADC1 work in trigger rotation mode only + \param[out] none + \retval none +*/ +void adc_mode_config(uint32_t mode) +{ + ADC_CTL0(ADC0) &= ~(ADC_CTL0_SYNCM); + ADC_CTL0(ADC0) |= mode; +} + +/*! + \brief enable or disable ADC special function + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] function: the function to config + only one parameter can be selected which is shown as below: + \arg ADC_SCAN_MODE: scan mode select + \arg ADC_INSERTED_CHANNEL_AUTO: inserted channel group convert automatically + \arg ADC_CONTINUOUS_MODE: continuous mode select + \param[in] newvalue: ENABLE or DISABLE + \param[out] none + \retval none +*/ +void adc_special_function_config(uint32_t adc_periph, uint32_t function, ControlStatus newvalue) +{ + if(newvalue){ + if(0U != (function & ADC_SCAN_MODE)){ + /* enable scan mode */ + ADC_CTL0(adc_periph) |= ADC_SCAN_MODE; + } + if(0U != (function & ADC_INSERTED_CHANNEL_AUTO)){ + /* enable inserted channel group convert automatically */ + ADC_CTL0(adc_periph) |= ADC_INSERTED_CHANNEL_AUTO; + } + if(0U != (function & ADC_CONTINUOUS_MODE)){ + /* enable continuous mode */ + ADC_CTL1(adc_periph) |= ADC_CONTINUOUS_MODE; + } + }else{ + if(0U != (function & ADC_SCAN_MODE)){ + /* disable scan mode */ + ADC_CTL0(adc_periph) &= ~ADC_SCAN_MODE; + } + if(0U != (function & ADC_INSERTED_CHANNEL_AUTO)){ + /* disable inserted channel group convert automatically */ + ADC_CTL0(adc_periph) &= ~ADC_INSERTED_CHANNEL_AUTO; + } + if(0U != (function & ADC_CONTINUOUS_MODE)){ + /* disable continuous mode */ + ADC_CTL1(adc_periph) &= ~ADC_CONTINUOUS_MODE; + } + } +} + +/*! + \brief configure ADC data alignment + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] data_alignment: data alignment select + only one parameter can be selected which is shown as below: + \arg ADC_DATAALIGN_RIGHT: LSB alignment + \arg ADC_DATAALIGN_LEFT: MSB alignment + \param[out] none + \retval none +*/ +void adc_data_alignment_config(uint32_t adc_periph, uint32_t data_alignment) +{ + if(ADC_DATAALIGN_RIGHT != data_alignment){ + /* MSB alignment */ + ADC_CTL1(adc_periph) |= ADC_CTL1_DAL; + }else{ + /* LSB alignment */ + ADC_CTL1(adc_periph) &= ~((uint32_t)ADC_CTL1_DAL); + } +} + +/*! + \brief enable ADC interface + \param[in] adc_periph: ADCx, x=0,1,2 + \param[out] none + \retval none +*/ +void adc_enable(uint32_t adc_periph) +{ + if(RESET == (ADC_CTL1(adc_periph) & ADC_CTL1_ADCON)){ + /* enable ADC */ + ADC_CTL1(adc_periph) |= (uint32_t)ADC_CTL1_ADCON; + } +} + +/*! + \brief disable ADC interface + \param[in] adc_periph: ADCx, x=0,1,2 + \param[out] none + \retval none +*/ +void adc_disable(uint32_t adc_periph) +{ + /* disable ADC */ + ADC_CTL1(adc_periph) &= ~((uint32_t)ADC_CTL1_ADCON); +} + +/*! + \brief ADC calibration and reset calibration + \param[in] adc_periph: ADCx, x=0,1,2 + \param[out] none + \retval none +*/ +void adc_calibration_enable(uint32_t adc_periph) +{ + /* reset the selected ADC1 calibration registers */ + ADC_CTL1(adc_periph) |= (uint32_t) ADC_CTL1_RSTCLB; + /* check the RSTCLB bit state */ + while(RESET != (ADC_CTL1(adc_periph) & ADC_CTL1_RSTCLB)){ + } + /* enable ADC calibration process */ + ADC_CTL1(adc_periph) |= ADC_CTL1_CLB; + /* check the CLB bit state */ + while(RESET != (ADC_CTL1(adc_periph) & ADC_CTL1_CLB)){ + } +} + +/*! + \brief enable the temperature sensor and Vrefint channel + \param[in] none + \param[out] none + \retval none +*/ +void adc_tempsensor_vrefint_enable(void) +{ + /* enable the temperature sensor and Vrefint channel */ + ADC_CTL1(ADC0) |= ADC_CTL1_TSVREN; +} + +/*! + \brief disable the temperature sensor and Vrefint channel + \param[in] none + \param[out] none + \retval none +*/ +void adc_tempsensor_vrefint_disable(void) +{ + /* disable the temperature sensor and Vrefint channel */ + ADC_CTL1(ADC0) &= ~ADC_CTL1_TSVREN; +} + +/*! + \brief enable DMA request + \param[in] adc_periph: ADCx, x=0,1,2 + \param[out] none + \retval none +*/ +void adc_dma_mode_enable(uint32_t adc_periph) +{ + /* enable DMA request */ + ADC_CTL1(adc_periph) |= (uint32_t)(ADC_CTL1_DMA); +} + +/*! + \brief disable DMA request + \param[in] adc_periph: ADCx, x=0,1,2 + \param[out] none + \retval none +*/ +void adc_dma_mode_disable(uint32_t adc_periph) +{ + /* disable DMA request */ + ADC_CTL1(adc_periph) &= ~((uint32_t)ADC_CTL1_DMA); +} + +/*! + \brief configure ADC discontinuous mode + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_channel_group: select the channel group + only one parameter can be selected which is shown as below: + \arg ADC_REGULAR_CHANNEL: regular channel group + \arg ADC_INSERTED_CHANNEL: inserted channel group + \arg ADC_CHANNEL_DISCON_DISABLE: disable discontinuous mode of regular & inserted channel + \param[in] length: number of conversions in discontinuous mode,the number can be 1..8 + for regular channel, the number has no effect for inserted channel + \param[out] none + \retval none +*/ +void adc_discontinuous_mode_config(uint32_t adc_periph, uint8_t adc_channel_group, uint8_t length) +{ + /* disable discontinuous mode of regular & inserted channel */ + ADC_CTL0(adc_periph) &= ~((uint32_t)(ADC_CTL0_DISRC | ADC_CTL0_DISIC)); + switch(adc_channel_group){ + case ADC_REGULAR_CHANNEL: + /* config the number of conversions in discontinuous mode */ + ADC_CTL0(adc_periph) &= ~((uint32_t)ADC_CTL0_DISNUM); + ADC_CTL0(adc_periph) |= CTL0_DISNUM(((uint32_t)length - ADC_CHANNEL_LENGTH_SUBTRACT_ONE)); + /* enable regular channel group discontinuous mode */ + ADC_CTL0(adc_periph) |= (uint32_t)ADC_CTL0_DISRC; + break; + case ADC_INSERTED_CHANNEL: + /* enable inserted channel group discontinuous mode */ + ADC_CTL0(adc_periph) |= (uint32_t)ADC_CTL0_DISIC; + break; + case ADC_CHANNEL_DISCON_DISABLE: + /* disable discontinuous mode of regular & inserted channel */ + default: + break; + } +} + +/*! + \brief configure the length of regular channel group or inserted channel group + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_channel_group: select the channel group + only one parameter can be selected which is shown as below: + \arg ADC_REGULAR_CHANNEL: regular channel group + \arg ADC_INSERTED_CHANNEL: inserted channel group + \param[in] length: the length of the channel + regular channel 1-16 + inserted channel 1-4 + \param[out] none + \retval none +*/ +void adc_channel_length_config(uint32_t adc_periph, uint8_t adc_channel_group, uint32_t length) +{ + switch(adc_channel_group){ + case ADC_REGULAR_CHANNEL: + /* configure the length of regular channel group */ + ADC_RSQ0(adc_periph) &= ~((uint32_t)ADC_RSQ0_RL); + ADC_RSQ0(adc_periph) |= RSQ0_RL((uint32_t)(length-ADC_CHANNEL_LENGTH_SUBTRACT_ONE)); + break; + case ADC_INSERTED_CHANNEL: + /* configure the length of inserted channel group */ + ADC_ISQ(adc_periph) &= ~((uint32_t)ADC_ISQ_IL); + ADC_ISQ(adc_periph) |= ISQ_IL((uint32_t)(length-ADC_CHANNEL_LENGTH_SUBTRACT_ONE)); + break; + default: + break; + } +} + +/*! + \brief configure ADC regular channel + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] rank: the regular group sequence rank,this parameter must be between 0 to 15 + \param[in] adc_channel: the selected ADC channel + only one parameter can be selected which is shown as below: + \arg ADC_CHANNEL_x(x=0..17)(x=16 and x=17 are only for ADC0): ADC Channelx + \param[in] sample_time: the sample time value + only one parameter can be selected which is shown as below: + \arg ADC_SAMPLETIME_1POINT5: 1.5 cycles + \arg ADC_SAMPLETIME_7POINT5: 7.5 cycles + \arg ADC_SAMPLETIME_13POINT5: 13.5 cycles + \arg ADC_SAMPLETIME_28POINT5: 28.5 cycles + \arg ADC_SAMPLETIME_41POINT5: 41.5 cycles + \arg ADC_SAMPLETIME_55POINT5: 55.5 cycles + \arg ADC_SAMPLETIME_71POINT5: 71.5 cycles + \arg ADC_SAMPLETIME_239POINT5: 239.5 cycles + \param[out] none + \retval none +*/ +void adc_regular_channel_config(uint32_t adc_periph, uint8_t rank, uint8_t adc_channel, uint32_t sample_time) +{ + uint32_t rsq,sampt; + + /* ADC regular sequence config */ + if(rank < ADC_REGULAR_CHANNEL_RANK_SIX){ + /* the regular group sequence rank is smaller than six */ + rsq = ADC_RSQ2(adc_periph); + rsq &= ~((uint32_t)(ADC_RSQX_RSQN << (ADC_REGULAR_CHANNEL_RANK_LENGTH*rank))); + /* the channel number is written to these bits to select a channel as the nth conversion in the regular channel group */ + rsq |= ((uint32_t)adc_channel << (ADC_REGULAR_CHANNEL_RANK_LENGTH*rank)); + ADC_RSQ2(adc_periph) = rsq; + }else if(rank < ADC_REGULAR_CHANNEL_RANK_TWELVE){ + /* the regular group sequence rank is smaller than twelve */ + rsq = ADC_RSQ1(adc_periph); + rsq &= ~((uint32_t)(ADC_RSQX_RSQN << (ADC_REGULAR_CHANNEL_RANK_LENGTH*(rank-ADC_REGULAR_CHANNEL_RANK_SIX)))); + /* the channel number is written to these bits to select a channel as the nth conversion in the regular channel group */ + rsq |= ((uint32_t)adc_channel << (ADC_REGULAR_CHANNEL_RANK_LENGTH*(rank-ADC_REGULAR_CHANNEL_RANK_SIX))); + ADC_RSQ1(adc_periph) = rsq; + }else if(rank < ADC_REGULAR_CHANNEL_RANK_SIXTEEN){ + /* the regular group sequence rank is smaller than sixteen */ + rsq = ADC_RSQ0(adc_periph); + rsq &= ~((uint32_t)(ADC_RSQX_RSQN << (ADC_REGULAR_CHANNEL_RANK_LENGTH*(rank-ADC_REGULAR_CHANNEL_RANK_TWELVE)))); + /* the channel number is written to these bits to select a channel as the nth conversion in the regular channel group */ + rsq |= ((uint32_t)adc_channel << (ADC_REGULAR_CHANNEL_RANK_LENGTH*(rank-ADC_REGULAR_CHANNEL_RANK_TWELVE))); + ADC_RSQ0(adc_periph) = rsq; + }else{ + } + + /* ADC sampling time config */ + if(adc_channel < ADC_CHANNEL_SAMPLE_TEN){ + /* the regular group sequence rank is smaller than ten */ + sampt = ADC_SAMPT1(adc_periph); + sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (ADC_CHANNEL_SAMPLE_LENGTH*adc_channel))); + /* channel sample time set*/ + sampt |= (uint32_t)(sample_time << (ADC_CHANNEL_SAMPLE_LENGTH*adc_channel)); + ADC_SAMPT1(adc_periph) = sampt; + }else if(adc_channel < ADC_CHANNEL_SAMPLE_EIGHTEEN){ + /* the regular group sequence rank is smaller than eighteen */ + sampt = ADC_SAMPT0(adc_periph); + sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (ADC_CHANNEL_SAMPLE_LENGTH*(adc_channel-ADC_CHANNEL_SAMPLE_TEN)))); + /* channel sample time set*/ + sampt |= (uint32_t)(sample_time << (ADC_CHANNEL_SAMPLE_LENGTH*(adc_channel-ADC_CHANNEL_SAMPLE_TEN))); + ADC_SAMPT0(adc_periph) = sampt; + }else{ + } +} + +/*! + \brief configure ADC inserted channel + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] rank: the inserted group sequencer rank,this parameter must be between 0 to 3 + \param[in] adc_channel: the selected ADC channel + only one parameter can be selected which is shown as below: + \arg ADC_CHANNEL_x(x=0..17)(x=16 and x=17 are only for ADC0): ADC Channelx + \param[in] sample_time: The sample time value + only one parameter can be selected which is shown as below: + \arg ADC_SAMPLETIME_1POINT5: 1.5 cycles + \arg ADC_SAMPLETIME_7POINT5: 7.5 cycles + \arg ADC_SAMPLETIME_13POINT5: 13.5 cycles + \arg ADC_SAMPLETIME_28POINT5: 28.5 cycles + \arg ADC_SAMPLETIME_41POINT5: 41.5 cycles + \arg ADC_SAMPLETIME_55POINT5: 55.5 cycles + \arg ADC_SAMPLETIME_71POINT5: 71.5 cycles + \arg ADC_SAMPLETIME_239POINT5: 239.5 cycles + \param[out] none + \retval none +*/ +void adc_inserted_channel_config(uint32_t adc_periph, uint8_t rank, uint8_t adc_channel, uint32_t sample_time) +{ + uint8_t inserted_length; + uint32_t isq,sampt; + /* get inserted channel group length */ + inserted_length = (uint8_t)GET_BITS(ADC_ISQ(adc_periph) , 20U , 21U); + /* the channel number is written to these bits to select a channel as the nth conversion in the inserted channel group */ + isq = ADC_ISQ(adc_periph); + isq &= ~((uint32_t)(ADC_ISQ_ISQN << (ADC_INSERTED_CHANNEL_SHIFT_LENGTH-(inserted_length-rank)*ADC_INSERTED_CHANNEL_RANK_LENGTH))); + isq |= ((uint32_t)adc_channel << (ADC_INSERTED_CHANNEL_SHIFT_LENGTH-(inserted_length-rank)*ADC_INSERTED_CHANNEL_RANK_LENGTH)); + ADC_ISQ(adc_periph) = isq; + + /* ADC sampling time config */ + if(adc_channel < ADC_CHANNEL_SAMPLE_TEN){ + /* the inserted group sequence rank is smaller than ten */ + sampt = ADC_SAMPT1(adc_periph); + sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (ADC_CHANNEL_SAMPLE_LENGTH*adc_channel))); + /* channel sample time set*/ + sampt |= (uint32_t) sample_time << (ADC_CHANNEL_SAMPLE_LENGTH*adc_channel); + ADC_SAMPT1(adc_periph) = sampt; + }else if(adc_channel < ADC_CHANNEL_SAMPLE_EIGHTEEN){ + /* the inserted group sequence rank is smaller than eighteen */ + sampt = ADC_SAMPT0(adc_periph); + sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (ADC_CHANNEL_SAMPLE_LENGTH*(adc_channel-ADC_CHANNEL_SAMPLE_TEN)))); + /* channel sample time set*/ + sampt |= ((uint32_t)sample_time << (ADC_CHANNEL_SAMPLE_LENGTH*(adc_channel-ADC_CHANNEL_SAMPLE_TEN))); + ADC_SAMPT0(adc_periph) = sampt; + }else{ + } +} + +/*! + \brief configure ADC inserted channel offset + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] inserted_channel: insert channel select + only one parameter can be selected + \arg ADC_INSERTED_CHANNEL_0: inserted channel0 + \arg ADC_INSERTED_CHANNEL_1: inserted channel1 + \arg ADC_INSERTED_CHANNEL_2: inserted channel2 + \arg ADC_INSERTED_CHANNEL_3: inserted channel3 + \param[in] offset: the offset data + \param[out] none + \retval none +*/ +void adc_inserted_channel_offset_config(uint32_t adc_periph, uint8_t inserted_channel, uint16_t offset) +{ + uint8_t inserted_length; + uint32_t num = 0U; + + inserted_length = (uint8_t)GET_BITS(ADC_ISQ(adc_periph) , 20U , 21U); + num = ((uint32_t)ADC_OFFSET_LENGTH - ((uint32_t)inserted_length - (uint32_t)inserted_channel)); + + if(num <= ADC_OFFSET_LENGTH){ + /* calculate the offset of the register */ + num = num * ADC_OFFSET_SHIFT_LENGTH; + /* config the offset of the selected channels */ + REG32((adc_periph) + 0x14U + num) = IOFFX_IOFF((uint32_t)offset); + } +} + +/*! + \brief configure ADC external trigger source + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_channel_group: select the channel group + only one parameter can be selected which is shown as below: + \arg ADC_REGULAR_CHANNEL: regular channel group + \arg ADC_INSERTED_CHANNEL: inserted channel group + \param[in] external_trigger_source: regular or inserted group trigger source + only one parameter can be selected + for regular channel: + \arg ADC0_1_EXTTRIG_REGULAR_T0_CH0: TIMER0 CH0 event select + \arg ADC0_1_EXTTRIG_REGULAR_T0_CH1: TIMER0 CH1 event select + \arg ADC0_1_EXTTRIG_REGULAR_T0_CH2: TIMER0 CH2 event select + \arg ADC0_1_EXTTRIG_REGULAR_T1_CH1: TIMER1 CH1 event select + \arg ADC0_1_EXTTRIG_REGULAR_T2_TRGO: TIMER2 TRGO event select + \arg ADC0_1_EXTTRIG_REGULAR_T3_CH3: TIMER3 CH3 event select + \arg ADC0_1_EXTTRIG_REGULAR_T7_TRGO: TIMER7 TRGO event select + \arg ADC0_1_EXTTRIG_REGULAR_EXTI_11: external interrupt line 11 + \arg ADC2_EXTTRIG_REGULAR_T2_CH0: TIMER2 CH0 event select + \arg ADC2_EXTTRIG_REGULAR_T1_CH2: TIMER1 CH2 event select + \arg ADC2_EXTTRIG_REGULAR_T0_CH2: TIMER0 CH2 event select + \arg ADC2_EXTTRIG_REGULAR_T7_CH0: TIMER7 CH0 event select + \arg ADC2_EXTTRIG_REGULAR_T7_TRGO: TIMER7 TRGO event select + \arg ADC2_EXTTRIG_REGULAR_T4_CH0: TIMER4 CH0 event select + \arg ADC2_EXTTRIG_REGULAR_T4_CH2: TIMER4 CH2 event select + \arg ADC0_1_2_EXTTRIG_REGULAR_NONE: software trigger + for inserted channel: + \arg ADC0_1_EXTTRIG_INSERTED_T0_TRGO: TIMER0 TRGO event select + \arg ADC0_1_EXTTRIG_INSERTED_T0_CH3: TIMER0 CH3 event select + \arg ADC0_1_EXTTRIG_INSERTED_T1_TRGO: TIMER1 TRGO event select + \arg ADC0_1_EXTTRIG_INSERTED_T1_CH0: TIMER1 CH0 event select + \arg ADC0_1_EXTTRIG_INSERTED_T2_CH3: TIMER2 CH3 event select + \arg ADC0_1_EXTTRIG_INSERTED_T3_TRGO: TIMER3 TRGO event select + \arg ADC0_1_EXTTRIG_INSERTED_EXTI_15: external interrupt line 15 + \arg ADC0_1_EXTTRIG_INSERTED_T7_CH3: TIMER7 CH3 event select + \arg ADC2_EXTTRIG_INSERTED_T0_TRGO: TIMER0 TRGO event select + \arg ADC2_EXTTRIG_INSERTED_T0_CH3: TIMER0 CH3 event select + \arg ADC2_EXTTRIG_INSERTED_T3_CH2: TIMER3 CH2 event select + \arg ADC2_EXTTRIG_INSERTED_T7_CH1: TIMER7 CH1 event select + \arg ADC2_EXTTRIG_INSERTED_T7_CH3: TIMER7 CH3 event select + \arg ADC2_EXTTRIG_INSERTED_T4_TRGO: TIMER4 TRGO event select + \arg ADC2_EXTTRIG_INSERTED_T4_CH3: TIMER4 CH3 event select + \arg ADC0_1_2_EXTTRIG_INSERTED_NONE: software trigger + \param[out] none + \retval none +*/ +void adc_external_trigger_source_config(uint32_t adc_periph, uint8_t adc_channel_group, uint32_t external_trigger_source) +{ + switch(adc_channel_group){ + case ADC_REGULAR_CHANNEL: + /* configure ADC regular group external trigger source */ + ADC_CTL1(adc_periph) &= ~((uint32_t)ADC_CTL1_ETSRC); + ADC_CTL1(adc_periph) |= (uint32_t)external_trigger_source; + break; + case ADC_INSERTED_CHANNEL: + /* configure ADC inserted group external trigger source */ + ADC_CTL1(adc_periph) &= ~((uint32_t)ADC_CTL1_ETSIC); + ADC_CTL1(adc_periph) |= (uint32_t)external_trigger_source; + break; + default: + break; + } +} + +/*! + \brief configure ADC external trigger + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_channel_group: select the channel group + one or more parameters can be selected which are shown as below: + \arg ADC_REGULAR_CHANNEL: regular channel group + \arg ADC_INSERTED_CHANNEL: inserted channel group + \param[in] newvalue: ENABLE or DISABLE + \param[out] none + \retval none +*/ +void adc_external_trigger_config(uint32_t adc_periph, uint8_t adc_channel_group, ControlStatus newvalue) +{ + if(newvalue){ + if(0U != (adc_channel_group & ADC_REGULAR_CHANNEL)){ + /* enable ADC regular channel group external trigger */ + ADC_CTL1(adc_periph) |= ADC_CTL1_ETERC; + } + if(0U != (adc_channel_group & ADC_INSERTED_CHANNEL)){ + /* enable ADC inserted channel group external trigger */ + ADC_CTL1(adc_periph) |= ADC_CTL1_ETEIC; + } + }else{ + if(0U != (adc_channel_group & ADC_REGULAR_CHANNEL)){ + /* disable ADC regular channel group external trigger */ + ADC_CTL1(adc_periph) &= ~ADC_CTL1_ETERC; + } + if(0U != (adc_channel_group & ADC_INSERTED_CHANNEL)){ + /* disable ADC regular channel group external trigger */ + ADC_CTL1(adc_periph) &= ~ADC_CTL1_ETEIC; + } + } +} + +/*! + \brief enable ADC software trigger + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_channel_group: select the channel group + one or more parameters can be selected which are shown as below: + \arg ADC_REGULAR_CHANNEL: regular channel group + \arg ADC_INSERTED_CHANNEL: inserted channel group + \param[out] none + \retval none +*/ +void adc_software_trigger_enable(uint32_t adc_periph, uint8_t adc_channel_group) +{ + if(0U != (adc_channel_group & ADC_REGULAR_CHANNEL)){ + /* enable ADC regular channel group software trigger */ + ADC_CTL1(adc_periph) |= ADC_CTL1_SWRCST; + } + if(0U != (adc_channel_group & ADC_INSERTED_CHANNEL)){ + /* enable ADC inserted channel group software trigger */ + ADC_CTL1(adc_periph) |= ADC_CTL1_SWICST; + } +} + +/*! + \brief read ADC regular group data register + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] none + \param[out] none + \retval the conversion value +*/ +uint16_t adc_regular_data_read(uint32_t adc_periph) +{ + return (uint16_t)(ADC_RDATA(adc_periph)); +} + +/*! + \brief read ADC inserted group data register + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] inserted_channel: insert channel select + only one parameter can be selected + \arg ADC_INSERTED_CHANNEL_0: inserted Channel0 + \arg ADC_INSERTED_CHANNEL_1: inserted channel1 + \arg ADC_INSERTED_CHANNEL_2: inserted Channel2 + \arg ADC_INSERTED_CHANNEL_3: inserted Channel3 + \param[out] none + \retval the conversion value +*/ +uint16_t adc_inserted_data_read(uint32_t adc_periph, uint8_t inserted_channel) +{ + uint32_t idata; + /* read the data of the selected channel */ + switch(inserted_channel){ + case ADC_INSERTED_CHANNEL_0: + /* read the data of channel 0 */ + idata = ADC_IDATA0(adc_periph); + break; + case ADC_INSERTED_CHANNEL_1: + /* read the data of channel 1 */ + idata = ADC_IDATA1(adc_periph); + break; + case ADC_INSERTED_CHANNEL_2: + /* read the data of channel 2 */ + idata = ADC_IDATA2(adc_periph); + break; + case ADC_INSERTED_CHANNEL_3: + /* read the data of channel 3 */ + idata = ADC_IDATA3(adc_periph); + break; + default: + idata = 0U; + break; + } + return (uint16_t)idata; +} + +/*! + \brief read the last ADC0 and ADC1 conversion result data in sync mode + \param[in] none + \param[out] none + \retval the conversion value +*/ +uint32_t adc_sync_mode_convert_value_read(void) +{ + /* return conversion value */ + return ADC_RDATA(ADC0); +} + + +/*! + \brief configure ADC analog watchdog single channel + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_channel: the selected ADC channel + only one parameter can be selected which is shown as below: + \arg ADC_CHANNEL_x: ADC Channelx(x=0..17)(x=16 and x=17 are only for ADC0) + \param[out] none + \retval none +*/ +void adc_watchdog_single_channel_enable(uint32_t adc_periph, uint8_t adc_channel) +{ + ADC_CTL0(adc_periph) &= (uint32_t)~(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC | ADC_CTL0_WDCHSEL); + /* analog watchdog channel select */ + ADC_CTL0(adc_periph) |= (uint32_t)adc_channel; + ADC_CTL0(adc_periph) |= (uint32_t)(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC); +} + +/*! + \brief configure ADC analog watchdog group channel + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_channel_group: the channel group use analog watchdog + only one parameter can be selected which is shown as below: + \arg ADC_REGULAR_CHANNEL: regular channel group + \arg ADC_INSERTED_CHANNEL: inserted channel group + \arg ADC_REGULAR_INSERTED_CHANNEL: both regular and inserted group + \param[out] none + \retval none +*/ +void adc_watchdog_group_channel_enable(uint32_t adc_periph, uint8_t adc_channel_group) +{ + ADC_CTL0(adc_periph) &= (uint32_t)~(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC); + /* select the group */ + switch(adc_channel_group){ + case ADC_REGULAR_CHANNEL: + /* regular channel analog watchdog enable */ + ADC_CTL0(adc_periph) |= (uint32_t) ADC_CTL0_RWDEN; + break; + case ADC_INSERTED_CHANNEL: + /* inserted channel analog watchdog enable */ + ADC_CTL0(adc_periph) |= (uint32_t) ADC_CTL0_IWDEN; + break; + case ADC_REGULAR_INSERTED_CHANNEL: + /* regular and inserted channel analog watchdog enable */ + ADC_CTL0(adc_periph) |= (uint32_t)(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN); + break; + default: + break; + } +} + +/*! + \brief disable ADC analog watchdog + \param[in] adc_periph: ADCx, x=0,1,2 + \param[out] none + \retval none +*/ +void adc_watchdog_disable(uint32_t adc_periph) +{ + ADC_CTL0(adc_periph) &= (uint32_t)~(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC | ADC_CTL0_WDCHSEL); +} + +/*! + \brief configure ADC analog watchdog threshold + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] low_threshold: analog watchdog low threshold, 0..4095 + \param[in] high_threshold: analog watchdog high threshold, 0..4095 + \param[out] none + \retval none +*/ +void adc_watchdog_threshold_config(uint32_t adc_periph, uint16_t low_threshold, uint16_t high_threshold) +{ + ADC_WDLT(adc_periph) = (uint32_t)WDLT_WDLT(low_threshold); + ADC_WDHT(adc_periph) = (uint32_t)WDHT_WDHT(high_threshold); +} + +/*! + \brief get the ADC flag bits + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_flag: the adc flag bits + only one parameter can be selected which is shown as below: + \arg ADC_FLAG_WDE: analog watchdog event flag + \arg ADC_FLAG_EOC: end of group conversion flag + \arg ADC_FLAG_EOIC: end of inserted group conversion flag + \arg ADC_FLAG_STIC: start flag of inserted channel group + \arg ADC_FLAG_STRC: start flag of regular channel group + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus adc_flag_get(uint32_t adc_periph, uint32_t adc_flag) +{ + FlagStatus reval = RESET; + if(ADC_STAT(adc_periph) & adc_flag){ + reval = SET; + } + return reval; +} + +/*! + \brief clear the ADC flag bits + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_flag: the adc flag bits + one or more parameters can be selected which are shown as below: + \arg ADC_FLAG_WDE: analog watchdog event flag + \arg ADC_FLAG_EOC: end of group conversion flag + \arg ADC_FLAG_EOIC: end of inserted group conversion flag + \arg ADC_FLAG_STIC: start flag of inserted channel group + \arg ADC_FLAG_STRC: start flag of regular channel group + \param[out] none + \retval none +*/ +void adc_flag_clear(uint32_t adc_periph, uint32_t adc_flag) +{ + ADC_STAT(adc_periph) &= ~((uint32_t)adc_flag); +} + +/*! + \brief get the bit state of ADCx software start conversion + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] none + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus adc_regular_software_startconv_flag_get(uint32_t adc_periph) +{ + FlagStatus reval = RESET; + if((uint32_t)RESET != (ADC_CTL1(adc_periph) & ADC_CTL1_SWRCST)){ + reval = SET; + } + return reval; +} + +/*! + \brief get the bit state of ADCx software inserted channel start conversion + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] none + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus adc_inserted_software_startconv_flag_get(uint32_t adc_periph) +{ + FlagStatus reval = RESET; + if((uint32_t)RESET != (ADC_CTL1(adc_periph) & ADC_CTL1_SWICST)){ + reval = SET; + } + return reval; +} + +/*! + \brief get the ADC interrupt bits + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_interrupt: the adc interrupt bits + only one parameter can be selected which is shown as below: + \arg ADC_INT_FLAG_WDE: analog watchdog interrupt + \arg ADC_INT_FLAG_EOC: end of group conversion interrupt + \arg ADC_INT_FLAG_EOIC: end of inserted group conversion interrupt + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus adc_interrupt_flag_get(uint32_t adc_periph, uint32_t adc_interrupt) +{ + FlagStatus interrupt_flag = RESET; + uint32_t state; + /* check the interrupt bits */ + switch(adc_interrupt){ + case ADC_INT_FLAG_WDE: + /* get the ADC analog watchdog interrupt bits */ + state = ADC_STAT(adc_periph) & ADC_STAT_WDE; + if((ADC_CTL0(adc_periph) & ADC_CTL0_WDEIE) && state){ + interrupt_flag = SET; + } + break; + case ADC_INT_FLAG_EOC: + /* get the ADC end of group conversion interrupt bits */ + state = ADC_STAT(adc_periph) & ADC_STAT_EOC; + if((ADC_CTL0(adc_periph) & ADC_CTL0_EOCIE) && state){ + interrupt_flag = SET; + } + break; + case ADC_INT_FLAG_EOIC: + /* get the ADC end of inserted group conversion interrupt bits */ + state = ADC_STAT(adc_periph) & ADC_STAT_EOIC; + if((ADC_CTL0(adc_periph) & ADC_CTL0_EOICIE) && state){ + interrupt_flag = SET; + } + break; + default: + break; + } + return interrupt_flag; +} + +/*! + \brief clear the ADC flag + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_interrupt: the adc status flag + one or more parameters can be selected which are shown as below: + \arg ADC_INT_FLAG_WDE: analog watchdog interrupt + \arg ADC_INT_FLAG_EOC: end of group conversion interrupt + \arg ADC_INT_FLAG_EOIC: end of inserted group conversion interrupt + \param[out] none + \retval none +*/ +void adc_interrupt_flag_clear(uint32_t adc_periph, uint32_t adc_interrupt) +{ + ADC_STAT(adc_periph) &= ~((uint32_t)adc_interrupt); +} + +/*! + \brief enable ADC interrupt + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_interrupt: the adc interrupt + one or more parameters can be selected which are shown as below: + \arg ADC_INT_WDE: analog watchdog interrupt flag + \arg ADC_INT_EOC: end of group conversion interrupt flag + \arg ADC_INT_EOIC: end of inserted group conversion interrupt flag + \param[out] none + \retval none +*/ +void adc_interrupt_enable(uint32_t adc_periph, uint32_t adc_interrupt) +{ + /* enable ADC analog watchdog interrupt */ + if(0U != (adc_interrupt & ADC_INT_WDE)){ + ADC_CTL0(adc_periph) |= (uint32_t) ADC_CTL0_WDEIE; + } + /* enable ADC end of group conversion interrupt */ + if(0U != (adc_interrupt & ADC_INT_EOC)){ + ADC_CTL0(adc_periph) |= (uint32_t) ADC_CTL0_EOCIE; + } + /* enable ADC end of inserted group conversion interrupt */ + if(0U != (adc_interrupt & ADC_INT_EOIC)){ + ADC_CTL0(adc_periph) |= (uint32_t) ADC_CTL0_EOICIE; + } +} + +/*! + \brief disable ADC interrupt + \param[in] adc_periph: ADCx, x=0,1,2 + \param[in] adc_interrupt: the adc interrupt flag + one or more parameters can be selected which are shown as below: + \arg ADC_INT_WDE: analog watchdog interrupt flag + \arg ADC_INT_EOC: end of group conversion interrupt flag + \arg ADC_INT_EOIC: end of inserted group conversion interrupt flag + \param[out] none + \retval none +*/ +void adc_interrupt_disable(uint32_t adc_periph, uint32_t adc_interrupt) +{ + /* disable ADC analog watchdog interrupt */ + if(0U != (adc_interrupt & ADC_INT_WDE)){ + ADC_CTL0(adc_periph) &= ~(uint32_t) ADC_CTL0_WDEIE; + } + /* disable ADC end of group conversion interrupt */ + if(0U != (adc_interrupt & ADC_INT_EOC)){ + ADC_CTL0(adc_periph) &= ~(uint32_t) ADC_CTL0_EOCIE; + } + /* disable ADC end of inserted group conversion interrupt */ + if(0U != (adc_interrupt & ADC_INT_EOIC)){ + ADC_CTL0(adc_periph) &= ~(uint32_t) ADC_CTL0_EOICIE; + } +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_bkp.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_bkp.c new file mode 100644 index 0000000000000000000000000000000000000000..69e0c6a93b35e5764812060921e4850ecc0f5972 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_bkp.c @@ -0,0 +1,296 @@ +/*! + \file gd32f10x_bkp.c + \brief BKP driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_bkp.h" + +/* BKP register bits offset */ +#define BKP_TAMPER_BITS_OFFSET ((uint32_t)8U) + +/*! + \brief reset BKP registers + \param[in] none + \param[out] none + \retval none +*/ +void bkp_deinit(void) +{ + /* reset BKP domain register*/ + rcu_bkp_reset_enable(); + rcu_bkp_reset_disable(); +} + +/*! + \brief write BKP data register + \param[in] register_number: refer to bkp_data_register_enum + only one parameter can be selected which is shown as below: + \arg BKP_DATA_x(x = 0..41): bkp data register number x + \param[in] data: the data to be write in BKP data register + \param[out] none + \retval none +*/ +void bkp_data_write(bkp_data_register_enum register_number, uint16_t data) +{ + if((register_number >= BKP_DATA_10) && (register_number <= BKP_DATA_41)){ + BKP_DATA10_41(register_number - 1U) = data; + }else if((register_number >= BKP_DATA_0) && (register_number <= BKP_DATA_9)){ + BKP_DATA0_9(register_number - 1U) = data; + }else{ + /* illegal parameters */ + } +} + +/*! + \brief read BKP data register + \param[in] register_number: refer to bkp_data_register_enum + only one parameter can be selected which is shown as below: + \arg BKP_DATA_x(x = 0..41): bkp data register number x + \param[out] none + \retval data of BKP data register +*/ +uint16_t bkp_data_read(bkp_data_register_enum register_number) +{ + uint16_t data = 0U; + + /* get the data from the BKP data register */ + if((register_number >= BKP_DATA_10) && (register_number <= BKP_DATA_41)){ + data = BKP_DATA10_41(register_number - 1U); + }else if((register_number >= BKP_DATA_0) && (register_number <= BKP_DATA_9)){ + data = BKP_DATA0_9(register_number - 1U); + }else{ + /* illegal parameters */ + } + return data; +} + +/*! + \brief enable RTC clock calibration output + \param[in] none + \param[out] none + \retval none +*/ +void bkp_rtc_calibration_output_enable(void) +{ + BKP_OCTL |= (uint16_t)BKP_OCTL_COEN; +} + +/*! + \brief disable RTC clock calibration output + \param[in] none + \param[out] none + \retval none +*/ +void bkp_rtc_calibration_output_disable(void) +{ + BKP_OCTL &= (uint16_t)~BKP_OCTL_COEN; +} + +/*! + \brief enable RTC alarm or second signal output + \param[in] none + \param[out] none + \retval none +*/ +void bkp_rtc_signal_output_enable(void) +{ + BKP_OCTL |= (uint16_t)BKP_OCTL_ASOEN; +} + +/*! + \brief disable RTC alarm or second signal output + \param[in] none + \param[out] none + \retval none +*/ +void bkp_rtc_signal_output_disable(void) +{ + BKP_OCTL &= (uint16_t)~BKP_OCTL_ASOEN; +} + +/*! + \brief select RTC output + \param[in] outputsel: RTC output selection + only one parameter can be selected which is shown as below: + \arg RTC_OUTPUT_ALARM_PULSE: RTC alarm pulse is selected as the RTC output + \arg RTC_OUTPUT_SECOND_PULSE: RTC second pulse is selected as the RTC output + \param[out] none + \retval none +*/ +void bkp_rtc_output_select(uint16_t outputsel) +{ + uint16_t ctl = 0U; + + /* configure BKP_OCTL_ROSEL with outputsel */ + ctl = BKP_OCTL; + ctl &= (uint16_t)~BKP_OCTL_ROSEL; + ctl |= outputsel; + BKP_OCTL = ctl; +} + +/*! + \brief set RTC clock calibration value + \param[in] value: RTC clock calibration value + \arg 0x00 - 0x7F + \param[out] none + \retval none +*/ +void bkp_rtc_calibration_value_set(uint8_t value) +{ + uint16_t ctl; + + /* configure BKP_OCTL_RCCV with value */ + ctl = BKP_OCTL; + ctl &= (uint16_t)~BKP_OCTL_RCCV; + ctl |= (uint16_t)OCTL_RCCV(value); + BKP_OCTL = ctl; +} + +/*! + \brief enable tamper detection + \param[in] none + \param[out] none + \retval none +*/ +void bkp_tamper_detection_enable(void) +{ + BKP_TPCTL |= (uint16_t)BKP_TPCTL_TPEN; +} + +/*! + \brief disable tamper detection + \param[in] none + \param[out] none + \retval none +*/ +void bkp_tamper_detection_disable(void) +{ + BKP_TPCTL &= (uint16_t)~BKP_TPCTL_TPEN; +} + +/*! + \brief set tamper pin active level + \param[in] level: tamper active level + only one parameter can be selected which is shown as below: + \arg TAMPER_PIN_ACTIVE_HIGH: the tamper pin is active high + \arg TAMPER_PIN_ACTIVE_LOW: the tamper pin is active low + \param[out] none + \retval none +*/ +void bkp_tamper_active_level_set(uint16_t level) +{ + uint16_t ctl = 0U; + + /* configure BKP_TPCTL_TPAL with level */ + ctl = BKP_TPCTL; + ctl &= (uint16_t)~BKP_TPCTL_TPAL; + ctl |= level; + BKP_TPCTL = ctl; +} + +/*! + \brief enable tamper interrupt + \param[in] none + \param[out] none + \retval none +*/ +void bkp_interrupt_enable(void) +{ + BKP_TPCS |= (uint16_t)BKP_TPCS_TPIE; +} + +/*! + \brief disable tamper interrupt + \param[in] none + \param[out] none + \retval none +*/ +void bkp_interrupt_disable(void) +{ + BKP_TPCS &= (uint16_t)~BKP_TPCS_TPIE; +} + +/*! + \brief get tamper flag state + \param[in] none + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus bkp_flag_get(void) +{ + if(RESET != (BKP_TPCS & BKP_FLAG_TAMPER)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear tamper flag state + \param[in] none + \param[out] none + \retval none +*/ +void bkp_flag_clear(void) +{ + BKP_TPCS |= (uint16_t)(BKP_FLAG_TAMPER >> BKP_TAMPER_BITS_OFFSET); +} + +/*! + \brief get tamper interrupt flag state + \param[in] none + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus bkp_interrupt_flag_get(void) +{ + if(RESET != (BKP_TPCS & BKP_INT_FLAG_TAMPER)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear tamper interrupt flag state + \param[in] none + \param[out] none + \retval none +*/ +void bkp_interrupt_flag_clear(void) +{ + BKP_TPCS |= (uint16_t)(BKP_INT_FLAG_TAMPER >> BKP_TAMPER_BITS_OFFSET); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_can.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_can.c new file mode 100644 index 0000000000000000000000000000000000000000..95ca2dd050b36c313665d6cb98d330bcfccdeb8f --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_can.c @@ -0,0 +1,993 @@ +/*! + \file gd32f10x_can.c + \brief CAN driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_can.h" + +#define CAN_ERROR_HANDLE(s) do{}while(1) + +/*! + \brief deinitialize CAN + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval none +*/ +void can_deinit(uint32_t can_periph) +{ +#ifdef GD32F10x_CL + if(CAN0 == can_periph){ + rcu_periph_reset_enable(RCU_CAN0RST); + rcu_periph_reset_disable(RCU_CAN0RST); + }else{ + rcu_periph_reset_enable(RCU_CAN1RST); + rcu_periph_reset_disable(RCU_CAN1RST); + } +#else + if(CAN0 == can_periph){ + rcu_periph_reset_enable(RCU_CAN0RST); + rcu_periph_reset_disable(RCU_CAN0RST); + } +#endif +} + +/*! + \brief initialize CAN parameter struct with a default value + \param[in] type: the type of CAN parameter struct + only one parameter can be selected which is shown as below: + \arg CAN_INIT_STRUCT: the CAN initial struct + \arg CAN_FILTER_STRUCT: the CAN filter struct + \arg CAN_TX_MESSAGE_STRUCT: the CAN TX message struct + \arg CAN_RX_MESSAGE_STRUCT: the CAN RX message struct + \param[in] p_struct: the pointer of the specific struct + \param[out] none + \retval none +*/ +void can_struct_para_init(can_struct_type_enum type, void* p_struct) +{ + uint8_t i; + + /* get type of the struct */ + switch(type){ + /* used for can_init() */ + case CAN_INIT_STRUCT: + ((can_parameter_struct*)p_struct)->auto_bus_off_recovery = DISABLE; + ((can_parameter_struct*)p_struct)->auto_retrans = DISABLE; + ((can_parameter_struct*)p_struct)->auto_wake_up = DISABLE; + ((can_parameter_struct*)p_struct)->prescaler = 0x03FFU; + ((can_parameter_struct*)p_struct)->rec_fifo_overwrite = DISABLE; + ((can_parameter_struct*)p_struct)->resync_jump_width = CAN_BT_SJW_1TQ; + ((can_parameter_struct*)p_struct)->time_segment_1 = CAN_BT_BS1_3TQ; + ((can_parameter_struct*)p_struct)->time_segment_2 = CAN_BT_BS2_1TQ; + ((can_parameter_struct*)p_struct)->time_triggered = DISABLE; + ((can_parameter_struct*)p_struct)->trans_fifo_order = DISABLE; + ((can_parameter_struct*)p_struct)->working_mode = CAN_NORMAL_MODE; + + break; + /* used for can_filter_init() */ + case CAN_FILTER_STRUCT: + ((can_filter_parameter_struct*)p_struct)->filter_bits = CAN_FILTERBITS_32BIT; + ((can_filter_parameter_struct*)p_struct)->filter_enable = DISABLE; + ((can_filter_parameter_struct*)p_struct)->filter_fifo_number = CAN_FIFO0; + ((can_filter_parameter_struct*)p_struct)->filter_list_high = 0x0000U; + ((can_filter_parameter_struct*)p_struct)->filter_list_low = 0x0000U; + ((can_filter_parameter_struct*)p_struct)->filter_mask_high = 0x0000U; + ((can_filter_parameter_struct*)p_struct)->filter_mask_low = 0x0000U; + ((can_filter_parameter_struct*)p_struct)->filter_mode = CAN_FILTERMODE_MASK; + ((can_filter_parameter_struct*)p_struct)->filter_number = 0U; + + break; + /* used for can_message_transmit() */ + case CAN_TX_MESSAGE_STRUCT: + for(i = 0U; i < 8U; i++){ + ((can_trasnmit_message_struct*)p_struct)->tx_data[i] = 0U; + } + + ((can_trasnmit_message_struct*)p_struct)->tx_dlen = 0u; + ((can_trasnmit_message_struct*)p_struct)->tx_efid = 0U; + ((can_trasnmit_message_struct*)p_struct)->tx_ff = (uint8_t)CAN_FF_STANDARD; + ((can_trasnmit_message_struct*)p_struct)->tx_ft = (uint8_t)CAN_FT_DATA; + ((can_trasnmit_message_struct*)p_struct)->tx_sfid = 0U; + + break; + /* used for can_message_receive() */ + case CAN_RX_MESSAGE_STRUCT: + for(i = 0U; i < 8U; i++){ + ((can_receive_message_struct*)p_struct)->rx_data[i] = 0U; + } + + ((can_receive_message_struct*)p_struct)->rx_dlen = 0U; + ((can_receive_message_struct*)p_struct)->rx_efid = 0U; + ((can_receive_message_struct*)p_struct)->rx_ff = (uint8_t)CAN_FF_STANDARD; + ((can_receive_message_struct*)p_struct)->rx_fi = 0U; + ((can_receive_message_struct*)p_struct)->rx_ft = (uint8_t)CAN_FT_DATA; + ((can_receive_message_struct*)p_struct)->rx_sfid = 0U; + + break; + + default: + CAN_ERROR_HANDLE("parameter is invalid \r\n"); + } +} + +/*! + \brief initialize CAN + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] can_parameter_init: parameters for CAN initializtion + \arg working_mode: CAN_NORMAL_MODE, CAN_LOOPBACK_MODE, CAN_SILENT_MODE, CAN_SILENT_LOOPBACK_MODE + \arg resync_jump_width: CAN_BT_SJW_xTQ(x=1, 2, 3, 4) + \arg time_segment_1: CAN_BT_BS1_xTQ(1..16) + \arg time_segment_2: CAN_BT_BS2_xTQ(1..8) + \arg time_triggered: ENABLE or DISABLE + \arg auto_bus_off_recovery: ENABLE or DISABLE + \arg auto_wake_up: ENABLE or DISABLE + \arg auto_retrans: ENABLE or DISABLE + \arg rec_fifo_overwrite: ENABLE or DISABLE + \arg trans_fifo_order: ENABLE or DISABLE + \arg prescaler: 0x0000 - 0x03FF + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus can_init(uint32_t can_periph, can_parameter_struct* can_parameter_init) +{ + uint32_t timeout = CAN_TIMEOUT; + ErrStatus flag = ERROR; + + /* disable sleep mode */ + CAN_CTL(can_periph) &= ~CAN_CTL_SLPWMOD; + /* enable initialize mode */ + CAN_CTL(can_periph) |= CAN_CTL_IWMOD; + /* wait ACK */ + while((CAN_STAT_IWS != (CAN_STAT(can_periph) & CAN_STAT_IWS)) && (0U != timeout)){ + timeout--; + } + /* check initialize working success */ + if(CAN_STAT_IWS != (CAN_STAT(can_periph) & CAN_STAT_IWS)){ + flag = ERROR; + }else{ + /* set the bit timing register */ + CAN_BT(can_periph) = (BT_MODE((uint32_t)can_parameter_init->working_mode) | \ + BT_SJW((uint32_t)can_parameter_init->resync_jump_width) | \ + BT_BS1((uint32_t)can_parameter_init->time_segment_1) | \ + BT_BS2((uint32_t)can_parameter_init->time_segment_2) | \ + BT_BAUDPSC(((uint32_t)(can_parameter_init->prescaler) - 1U))); + + /* time trigger communication mode */ + if(ENABLE == can_parameter_init->time_triggered){ + CAN_CTL(can_periph) |= CAN_CTL_TTC; + }else{ + CAN_CTL(can_periph) &= ~CAN_CTL_TTC; + } + /* automatic bus-off managment */ + if(ENABLE == can_parameter_init->auto_bus_off_recovery){ + CAN_CTL(can_periph) |= CAN_CTL_ABOR; + }else{ + CAN_CTL(can_periph) &= ~CAN_CTL_ABOR; + } + /* automatic wakeup mode */ + if(ENABLE == can_parameter_init->auto_wake_up){ + CAN_CTL(can_periph) |= CAN_CTL_AWU; + }else{ + CAN_CTL(can_periph) &= ~CAN_CTL_AWU; + } + /* automatic retransmission mode disable*/ + if(ENABLE == can_parameter_init->auto_retrans){ + CAN_CTL(can_periph) |= CAN_CTL_ARD; + }else{ + CAN_CTL(can_periph) &= ~CAN_CTL_ARD; + } + /* receive fifo overwrite mode */ + if(ENABLE == can_parameter_init->rec_fifo_overwrite){ + CAN_CTL(can_periph) |= CAN_CTL_RFOD; + }else{ + CAN_CTL(can_periph) &= ~CAN_CTL_RFOD; + } + /* transmit fifo order */ + if(ENABLE == can_parameter_init->trans_fifo_order){ + CAN_CTL(can_periph) |= CAN_CTL_TFO; + }else{ + CAN_CTL(can_periph) &= ~CAN_CTL_TFO; + } + /* disable initialize mode */ + CAN_CTL(can_periph) &= ~CAN_CTL_IWMOD; + timeout = CAN_TIMEOUT; + /* wait the ACK */ + while((CAN_STAT_IWS == (CAN_STAT(can_periph) & CAN_STAT_IWS)) && (0U != timeout)){ + timeout--; + } + /* check exit initialize mode */ + if(0U != timeout){ + flag = SUCCESS; + } + } + return flag; +} + +/*! + \brief initialize CAN filter + \param[in] can_filter_parameter_init: struct for CAN filter initialization + \arg filter_list_high: 0x0000 - 0xFFFF + \arg filter_list_low: 0x0000 - 0xFFFF + \arg filter_mask_high: 0x0000 - 0xFFFF + \arg filter_mask_low: 0x0000 - 0xFFFF + \arg filter_fifo_number: CAN_FIFO0, CAN_FIFO1 + \arg filter_number: 0 - 27 + \arg filter_mode: CAN_FILTERMODE_MASK, CAN_FILTERMODE_LIST + \arg filter_bits: CAN_FILTERBITS_32BIT, CAN_FILTERBITS_16BIT + \arg filter_enable: ENABLE or DISABLE + \param[out] none + \retval none +*/ +void can_filter_init(can_filter_parameter_struct* can_filter_parameter_init) +{ + uint32_t val = 0U; + + val = ((uint32_t)1) << (can_filter_parameter_init->filter_number); + /* filter lock disable */ + CAN_FCTL(CAN0) |= CAN_FCTL_FLD; + /* disable filter */ + CAN_FW(CAN0) &= ~(uint32_t)val; + + /* filter 16 bits */ + if(CAN_FILTERBITS_16BIT == can_filter_parameter_init->filter_bits){ + /* set filter 16 bits */ + CAN_FSCFG(CAN0) &= ~(uint32_t)val; + /* first 16 bits list and first 16 bits mask or first 16 bits list and second 16 bits list */ + CAN_FDATA0(CAN0, can_filter_parameter_init->filter_number) = \ + FDATA_MASK_HIGH((can_filter_parameter_init->filter_mask_low) & CAN_FILTER_MASK_16BITS) | \ + FDATA_MASK_LOW((can_filter_parameter_init->filter_list_low) & CAN_FILTER_MASK_16BITS); + /* second 16 bits list and second 16 bits mask or third 16 bits list and fourth 16 bits list */ + CAN_FDATA1(CAN0, can_filter_parameter_init->filter_number) = \ + FDATA_MASK_HIGH((can_filter_parameter_init->filter_mask_high) & CAN_FILTER_MASK_16BITS) | \ + FDATA_MASK_LOW((can_filter_parameter_init->filter_list_high) & CAN_FILTER_MASK_16BITS); + } + /* filter 32 bits */ + if(CAN_FILTERBITS_32BIT == can_filter_parameter_init->filter_bits){ + /* set filter 32 bits */ + CAN_FSCFG(CAN0) |= (uint32_t)val; + /* 32 bits list or first 32 bits list */ + CAN_FDATA0(CAN0, can_filter_parameter_init->filter_number) = \ + FDATA_MASK_HIGH((can_filter_parameter_init->filter_list_high) & CAN_FILTER_MASK_16BITS) | + FDATA_MASK_LOW((can_filter_parameter_init->filter_list_low) & CAN_FILTER_MASK_16BITS); + /* 32 bits mask or second 32 bits list */ + CAN_FDATA1(CAN0, can_filter_parameter_init->filter_number) = \ + FDATA_MASK_HIGH((can_filter_parameter_init->filter_mask_high) & CAN_FILTER_MASK_16BITS) | + FDATA_MASK_LOW((can_filter_parameter_init->filter_mask_low) & CAN_FILTER_MASK_16BITS); + } + + /* filter mode */ + if(CAN_FILTERMODE_MASK == can_filter_parameter_init->filter_mode){ + /* mask mode */ + CAN_FMCFG(CAN0) &= ~(uint32_t)val; + }else{ + /* list mode */ + CAN_FMCFG(CAN0) |= (uint32_t)val; + } + + /* filter FIFO */ + if(CAN_FIFO0 == (can_filter_parameter_init->filter_fifo_number)){ + /* FIFO0 */ + CAN_FAFIFO(CAN0) &= ~(uint32_t)val; + }else{ + /* FIFO1 */ + CAN_FAFIFO(CAN0) |= (uint32_t)val; + } + + /* filter working */ + if(ENABLE == can_filter_parameter_init->filter_enable){ + + CAN_FW(CAN0) |= (uint32_t)val; + } + + /* filter lock enable */ + CAN_FCTL(CAN0) &= ~CAN_FCTL_FLD; +} + +/*! + \brief set CAN1 fliter start bank number + \param[in] start_bank: CAN1 start bank number + only one parameter can be selected which is shown as below: + \arg (1..27) + \param[out] none + \retval none +*/ +void can1_filter_start_bank(uint8_t start_bank) +{ + /* filter lock disable */ + CAN_FCTL(CAN0) |= CAN_FCTL_FLD; + /* set CAN1 filter start number */ + CAN_FCTL(CAN0) &= ~(uint32_t)CAN_FCTL_HBC1F; + CAN_FCTL(CAN0) |= FCTL_HBC1F(start_bank); + /* filter lock enaable */ + CAN_FCTL(CAN0) &= ~CAN_FCTL_FLD; +} + +/*! + \brief enable CAN debug freeze + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval none +*/ +void can_debug_freeze_enable(uint32_t can_periph) +{ + /* set DFZ bit */ + CAN_CTL(can_periph) |= CAN_CTL_DFZ; +#ifdef GD32F10x_CL + if(CAN0 == can_periph){ + dbg_periph_enable(DBG_CAN0_HOLD); + }else{ + dbg_periph_enable(DBG_CAN1_HOLD); + } +#else + if(CAN0 == can_periph){ + dbg_periph_enable(DBG_CAN0_HOLD); + } +#endif +} + +/*! + \brief disable CAN debug freeze + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval none +*/ +void can_debug_freeze_disable(uint32_t can_periph) +{ + /* set DFZ bit */ + CAN_CTL(can_periph) &= ~CAN_CTL_DFZ; +#ifdef GD32F10x_CL + if(CAN0 == can_periph){ + dbg_periph_disable(DBG_CAN0_HOLD); + }else{ + dbg_periph_disable(DBG_CAN1_HOLD); + } +#else + if(CAN0 == can_periph){ + dbg_periph_enable(DBG_CAN0_HOLD); + } +#endif +} + +/*! + \brief enable CAN time trigger mode + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval none +*/ +void can_time_trigger_mode_enable(uint32_t can_periph) +{ + uint8_t mailbox_number; + + /* enable the tcc mode */ + CAN_CTL(can_periph) |= CAN_CTL_TTC; + /* enable time stamp */ + for(mailbox_number = 0U; mailbox_number < 3U; mailbox_number++){ + CAN_TMP(can_periph, mailbox_number) |= CAN_TMP_TSEN; + } +} + +/*! + \brief disable CAN time trigger mode + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval none +*/ +void can_time_trigger_mode_disable(uint32_t can_periph) +{ + uint8_t mailbox_number; + + /* disable the TCC mode */ + CAN_CTL(can_periph) &= ~CAN_CTL_TTC; + /* reset TSEN bits */ + for(mailbox_number = 0U; mailbox_number < 3U; mailbox_number++){ + CAN_TMP(can_periph, mailbox_number) &= ~CAN_TMP_TSEN; + } +} + +/*! + \brief transmit CAN message + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] transmit_message: struct for CAN transmit message + \arg tx_sfid: 0x00000000 - 0x000007FF + \arg tx_efid: 0x00000000 - 0x1FFFFFFF + \arg tx_ff: CAN_FF_STANDARD, CAN_FF_EXTENDED + \arg tx_ft: CAN_FT_DATA, CAN_FT_REMOTE + \arg tx_dlenc: 1 - 7 + \arg tx_data[]: 0x00 - 0xFF + \param[out] none + \retval mailbox_number +*/ +uint8_t can_message_transmit(uint32_t can_periph, can_trasnmit_message_struct* transmit_message) +{ + uint8_t mailbox_number = CAN_MAILBOX0; + + /* select one empty mailbox */ + if(CAN_TSTAT_TME0 == (CAN_TSTAT(can_periph)&CAN_TSTAT_TME0)){ + mailbox_number = CAN_MAILBOX0; + }else if(CAN_TSTAT_TME1 == (CAN_TSTAT(can_periph)&CAN_TSTAT_TME1)){ + mailbox_number = CAN_MAILBOX1; + }else if(CAN_TSTAT_TME2 == (CAN_TSTAT(can_periph)&CAN_TSTAT_TME2)){ + mailbox_number = CAN_MAILBOX2; + }else{ + mailbox_number = CAN_NOMAILBOX; + } + /* return no mailbox empty */ + if(CAN_NOMAILBOX == mailbox_number){ + return CAN_NOMAILBOX; + } + + CAN_TMI(can_periph, mailbox_number) &= CAN_TMI_TEN; + if(CAN_FF_STANDARD == transmit_message->tx_ff){ + /* set transmit mailbox standard identifier */ + CAN_TMI(can_periph, mailbox_number) |= (uint32_t)(TMI_SFID(transmit_message->tx_sfid) | \ + transmit_message->tx_ft); + }else{ + /* set transmit mailbox extended identifier */ + CAN_TMI(can_periph, mailbox_number) |= (uint32_t)(TMI_EFID(transmit_message->tx_efid) | \ + transmit_message->tx_ff | \ + transmit_message->tx_ft); + } + /* set the data length */ + CAN_TMP(can_periph, mailbox_number) &= ~CAN_TMP_DLENC; + CAN_TMP(can_periph, mailbox_number) |= transmit_message->tx_dlen; + /* set the data */ + CAN_TMDATA0(can_periph, mailbox_number) = TMDATA0_DB3(transmit_message->tx_data[3]) | \ + TMDATA0_DB2(transmit_message->tx_data[2]) | \ + TMDATA0_DB1(transmit_message->tx_data[1]) | \ + TMDATA0_DB0(transmit_message->tx_data[0]); + CAN_TMDATA1(can_periph, mailbox_number) = TMDATA1_DB7(transmit_message->tx_data[7]) | \ + TMDATA1_DB6(transmit_message->tx_data[6]) | \ + TMDATA1_DB5(transmit_message->tx_data[5]) | \ + TMDATA1_DB4(transmit_message->tx_data[4]); + /* enable transmission */ + CAN_TMI(can_periph, mailbox_number) |= CAN_TMI_TEN; + + return mailbox_number; +} + +/*! + \brief get CAN transmit state + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] mailbox_number + only one parameter can be selected which is shown as below: + \arg CAN_MAILBOX(x=0,1,2) + \param[out] none + \retval can_transmit_state_enum +*/ +can_transmit_state_enum can_transmit_states(uint32_t can_periph, uint8_t mailbox_number) +{ + can_transmit_state_enum state = CAN_TRANSMIT_FAILED; + uint32_t val = 0U; + + /* check selected mailbox state */ + switch(mailbox_number){ + /* mailbox0 */ + case CAN_MAILBOX0: + val = CAN_TSTAT(can_periph) & (CAN_TSTAT_MTF0 | CAN_TSTAT_MTFNERR0 | CAN_TSTAT_TME0); + break; + /* mailbox1 */ + case CAN_MAILBOX1: + val = CAN_TSTAT(can_periph) & (CAN_TSTAT_MTF1 | CAN_TSTAT_MTFNERR1 | CAN_TSTAT_TME1); + break; + /* mailbox2 */ + case CAN_MAILBOX2: + val = CAN_TSTAT(can_periph) & (CAN_TSTAT_MTF2 | CAN_TSTAT_MTFNERR2 | CAN_TSTAT_TME2); + break; + default: + val = CAN_TRANSMIT_FAILED; + break; + } + + switch(val){ + /* transmit pending */ + case (CAN_STATE_PENDING): + state = CAN_TRANSMIT_PENDING; + break; + /* mailbox0 transmit succeeded */ + case (CAN_TSTAT_MTF0 | CAN_TSTAT_MTFNERR0 | CAN_TSTAT_TME0): + state = CAN_TRANSMIT_OK; + break; + /* mailbox1 transmit succeeded */ + case (CAN_TSTAT_MTF1 | CAN_TSTAT_MTFNERR1 | CAN_TSTAT_TME1): + state = CAN_TRANSMIT_OK; + break; + /* mailbox2 transmit succeeded */ + case (CAN_TSTAT_MTF2 | CAN_TSTAT_MTFNERR2 | CAN_TSTAT_TME2): + state = CAN_TRANSMIT_OK; + break; + /* transmit failed */ + default: + state = CAN_TRANSMIT_FAILED; + break; + } + return state; +} + +/*! + \brief stop CAN transmission + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] mailbox_number + only one parameter can be selected which is shown as below: + \arg CAN_MAILBOXx(x=0,1,2) + \param[out] none + \retval none +*/ +void can_transmission_stop(uint32_t can_periph, uint8_t mailbox_number) +{ + if(CAN_MAILBOX0 == mailbox_number){ + CAN_TSTAT(can_periph) |= CAN_TSTAT_MST0; + while(CAN_TSTAT_MST0 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST0)){ + } + }else if(CAN_MAILBOX1 == mailbox_number){ + CAN_TSTAT(can_periph) |= CAN_TSTAT_MST1; + while(CAN_TSTAT_MST1 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST1)){ + } + }else if(CAN_MAILBOX2 == mailbox_number){ + CAN_TSTAT(can_periph) |= CAN_TSTAT_MST2; + while(CAN_TSTAT_MST2 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST2)){ + } + }else{ + /* illegal parameters */ + } +} + +/*! + \brief CAN receive message + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] fifo_number + \arg CAN_FIFOx(x=0,1) + \param[out] receive_message: struct for CAN receive message + \arg rx_sfid: 0x00000000 - 0x000007FF + \arg rx_efid: 0x00000000 - 0x1FFFFFFF + \arg rx_ff: CAN_FF_STANDARD, CAN_FF_EXTENDED + \arg rx_ft: CAN_FT_DATA, CAN_FT_REMOTE + \arg rx_dlenc: 1 - 7 + \arg rx_data[]: 0x00 - 0xFF + \arg rx_fi: 0 - 27 + \retval none +*/ +void can_message_receive(uint32_t can_periph, uint8_t fifo_number, can_receive_message_struct* receive_message) +{ + /* get the frame format */ + receive_message->rx_ff = (uint8_t)(CAN_RFIFOMI_FF & CAN_RFIFOMI(can_periph, fifo_number)); + if(CAN_FF_STANDARD == receive_message->rx_ff){ + /* get standard identifier */ + receive_message->rx_sfid = (uint32_t)(GET_RFIFOMI_SFID(CAN_RFIFOMI(can_periph, fifo_number))); + }else{ + /* get extended identifier */ + receive_message->rx_efid = (uint32_t)(GET_RFIFOMI_EFID(CAN_RFIFOMI(can_periph, fifo_number))); + } + + /* get frame type */ + receive_message->rx_ft = (uint8_t)(CAN_RFIFOMI_FT & CAN_RFIFOMI(can_periph, fifo_number)); + /* filtering index */ + receive_message->rx_fi = (uint8_t)(GET_RFIFOMP_FI(CAN_RFIFOMP(can_periph, fifo_number))); + /* get recevie data length */ + receive_message->rx_dlen = (uint8_t)(GET_RFIFOMP_DLENC(CAN_RFIFOMP(can_periph, fifo_number))); + + /* receive data */ + receive_message -> rx_data[0] = (uint8_t)(GET_RFIFOMDATA0_DB0(CAN_RFIFOMDATA0(can_periph, fifo_number))); + receive_message -> rx_data[1] = (uint8_t)(GET_RFIFOMDATA0_DB1(CAN_RFIFOMDATA0(can_periph, fifo_number))); + receive_message -> rx_data[2] = (uint8_t)(GET_RFIFOMDATA0_DB2(CAN_RFIFOMDATA0(can_periph, fifo_number))); + receive_message -> rx_data[3] = (uint8_t)(GET_RFIFOMDATA0_DB3(CAN_RFIFOMDATA0(can_periph, fifo_number))); + receive_message -> rx_data[4] = (uint8_t)(GET_RFIFOMDATA1_DB4(CAN_RFIFOMDATA1(can_periph, fifo_number))); + receive_message -> rx_data[5] = (uint8_t)(GET_RFIFOMDATA1_DB5(CAN_RFIFOMDATA1(can_periph, fifo_number))); + receive_message -> rx_data[6] = (uint8_t)(GET_RFIFOMDATA1_DB6(CAN_RFIFOMDATA1(can_periph, fifo_number))); + receive_message -> rx_data[7] = (uint8_t)(GET_RFIFOMDATA1_DB7(CAN_RFIFOMDATA1(can_periph, fifo_number))); + + /* release FIFO */ + if(CAN_FIFO0 == fifo_number){ + CAN_RFIFO0(can_periph) |= CAN_RFIFO0_RFD0; + }else{ + CAN_RFIFO1(can_periph) |= CAN_RFIFO1_RFD1; + } +} + +/*! + \brief release FIFO0 + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] fifo_number + only one parameter can be selected which is shown as below: + \arg CAN_FIFOx(x=0,1) + \param[out] none + \retval none +*/ +void can_fifo_release(uint32_t can_periph, uint8_t fifo_number) +{ + if(CAN_FIFO0 == fifo_number){ + CAN_RFIFO0(can_periph) |= CAN_RFIFO0_RFD0; + }else if(CAN_FIFO1 == fifo_number){ + CAN_RFIFO1(can_periph) |= CAN_RFIFO1_RFD1; + }else{ + /* illegal parameters */ + CAN_ERROR_HANDLE("CAN FIFO NUM is invalid \r\n"); + } +} + +/*! + \brief CAN receive message length + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] fifo_number + only one parameter can be selected which is shown as below: + \arg CAN_FIFOx(x=0,1) + \param[out] none + \retval message length +*/ +uint8_t can_receive_message_length_get(uint32_t can_periph, uint8_t fifo_number) +{ + uint8_t val = 0U; + + if(CAN_FIFO0 == fifo_number){ + /* FIFO0 */ + val = (uint8_t)(CAN_RFIFO0(can_periph) & CAN_RFIF_RFL_MASK); + }else if(CAN_FIFO1 == fifo_number){ + /* FIFO1 */ + val = (uint8_t)(CAN_RFIFO1(can_periph) & CAN_RFIF_RFL_MASK); + }else{ + /* illegal parameters */ + } + return val; +} + +/*! + \brief set CAN working mode + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] can_working_mode + only one parameter can be selected which is shown as below: + \arg CAN_MODE_INITIALIZE + \arg CAN_MODE_NORMAL + \arg CAN_MODE_SLEEP + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus can_working_mode_set(uint32_t can_periph, uint8_t working_mode) +{ + ErrStatus flag = ERROR; + /* timeout for IWS or also for SLPWS bits */ + uint32_t timeout = CAN_TIMEOUT; + + if(CAN_MODE_INITIALIZE == working_mode){ + /* disable sleep mode */ + CAN_CTL(can_periph) &= (~(uint32_t)CAN_CTL_SLPWMOD); + /* set initialize mode */ + CAN_CTL(can_periph) |= (uint8_t)CAN_CTL_IWMOD; + /* wait the acknowledge */ + while((CAN_STAT_IWS != (CAN_STAT(can_periph) & CAN_STAT_IWS)) && (0U != timeout)){ + timeout--; + } + if(CAN_STAT_IWS != (CAN_STAT(can_periph) & CAN_STAT_IWS)){ + flag = ERROR; + }else{ + flag = SUCCESS; + } + }else if(CAN_MODE_NORMAL == working_mode){ + /* enter normal mode */ + CAN_CTL(can_periph) &= ~(uint32_t)(CAN_CTL_SLPWMOD | CAN_CTL_IWMOD); + /* wait the acknowledge */ + while((0U != (CAN_STAT(can_periph) & (CAN_STAT_IWS | CAN_STAT_SLPWS))) && (0U != timeout)){ + timeout--; + } + if(0U != (CAN_STAT(can_periph) & (CAN_STAT_IWS | CAN_STAT_SLPWS))){ + flag = ERROR; + }else{ + flag = SUCCESS; + } + }else if(CAN_MODE_SLEEP == working_mode){ + /* disable initialize mode */ + CAN_CTL(can_periph) &= (~(uint32_t)CAN_CTL_IWMOD); + /* set sleep mode */ + CAN_CTL(can_periph) |= (uint8_t)CAN_CTL_SLPWMOD; + /* wait the acknowledge */ + while((CAN_STAT_SLPWS != (CAN_STAT(can_periph) & CAN_STAT_SLPWS)) && (0U != timeout)){ + timeout--; + } + if(CAN_STAT_SLPWS != (CAN_STAT(can_periph) & CAN_STAT_SLPWS)){ + flag = ERROR; + }else{ + flag = SUCCESS; + } + }else{ + flag = ERROR; + } + return flag; +} + +/*! + \brief wake up CAN + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus can_wakeup(uint32_t can_periph) +{ + ErrStatus flag = ERROR; + uint32_t timeout = CAN_TIMEOUT; + + /* wakeup */ + CAN_CTL(can_periph) &= ~CAN_CTL_SLPWMOD; + + while((0U != (CAN_STAT(can_periph) & CAN_STAT_SLPWS)) && (0x00U != timeout)){ + timeout--; + } + /* check state */ + if(0U != (CAN_STAT(can_periph) & CAN_STAT_SLPWS)){ + flag = ERROR; + }else{ + flag = SUCCESS; + } + return flag; +} + +/*! + \brief get CAN error type + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval can_error_enum + \arg CAN_ERROR_NONE: no error + \arg CAN_ERROR_FILL: fill error + \arg CAN_ERROR_FORMATE: format error + \arg CAN_ERROR_ACK: ACK error + \arg CAN_ERROR_BITRECESSIVE: bit recessive + \arg CAN_ERROR_BITDOMINANTER: bit dominant error + \arg CAN_ERROR_CRC: CRC error + \arg CAN_ERROR_SOFTWARECFG: software configure +*/ +can_error_enum can_error_get(uint32_t can_periph) +{ + can_error_enum error; + error = CAN_ERROR_NONE; + + /* get error type */ + error = (can_error_enum)(GET_ERR_ERRN(CAN_ERR(can_periph))); + return error; +} + +/*! + \brief get CAN receive error number + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval error number +*/ +uint8_t can_receive_error_number_get(uint32_t can_periph) +{ + uint8_t val; + + /* get error count */ + val = (uint8_t)(GET_ERR_RECNT(CAN_ERR(can_periph))); + return val; +} + +/*! + \brief get CAN transmit error number + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[out] none + \retval error number +*/ +uint8_t can_transmit_error_number_get(uint32_t can_periph) +{ + uint8_t val; + + val = (uint8_t)(GET_ERR_TECNT(CAN_ERR(can_periph))); + return val; +} + +/*! + \brief enable CAN interrupt + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] interrupt + one or more parameters can be selected which are shown as below: + \arg CAN_INT_TME: transmit mailbox empty interrupt enable + \arg CAN_INT_RFNE0: receive FIFO0 not empty interrupt enable + \arg CAN_INT_RFF0: receive FIFO0 full interrupt enable + \arg CAN_INT_RFO0: receive FIFO0 overfull interrupt enable + \arg CAN_INT_RFNE1: receive FIFO1 not empty interrupt enable + \arg CAN_INT_RFF1: receive FIFO1 full interrupt enable + \arg CAN_INT_RFO1: receive FIFO1 overfull interrupt enable + \arg CAN_INT_WERR: warning error interrupt enable + \arg CAN_INT_PERR: passive error interrupt enable + \arg CAN_INT_BO: bus-off interrupt enable + \arg CAN_INT_ERRN: error number interrupt enable + \arg CAN_INT_ERR: error interrupt enable + \arg CAN_INT_WU: wakeup interrupt enable + \arg CAN_INT_SLPW: sleep working interrupt enable + \param[out] none + \retval none +*/ +void can_interrupt_enable(uint32_t can_periph, uint32_t interrupt) +{ + CAN_INTEN(can_periph) |= interrupt; +} + +/*! + \brief disable CAN interrupt + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] interrupt + one or more parameters can be selected which are shown as below: + \arg CAN_INT_TME: transmit mailbox empty interrupt enable + \arg CAN_INT_RFNE0: receive FIFO0 not empty interrupt enable + \arg CAN_INT_RFF0: receive FIFO0 full interrupt enable + \arg CAN_INT_RFO0: receive FIFO0 overfull interrupt enable + \arg CAN_INT_RFNE1: receive FIFO1 not empty interrupt enable + \arg CAN_INT_RFF1: receive FIFO1 full interrupt enable + \arg CAN_INT_RFO1: receive FIFO1 overfull interrupt enable + \arg CAN_INT_WERR: warning error interrupt enable + \arg CAN_INT_PERR: passive error interrupt enable + \arg CAN_INT_BO: bus-off interrupt enable + \arg CAN_INT_ERRN: error number interrupt enable + \arg CAN_INT_ERR: error interrupt enable + \arg CAN_INT_WU: wakeup interrupt enable + \arg CAN_INT_SLPW: sleep working interrupt enable + \param[out] none + \retval none +*/ +void can_interrupt_disable(uint32_t can_periph, uint32_t interrupt) +{ + CAN_INTEN(can_periph) &= ~interrupt; +} + +/*! + \brief get CAN flag state + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] flag: CAN flags, refer to can_flag_enum + only one parameter can be selected which is shown as below: + \arg CAN_FLAG_MTE2: mailbox 2 transmit error + \arg CAN_FLAG_MTE1: mailbox 1 transmit error + \arg CAN_FLAG_MTE0: mailbox 0 transmit error + \arg CAN_FLAG_MTF2: mailbox 2 transmit finished + \arg CAN_FLAG_MTF1: mailbox 1 transmit finished + \arg CAN_FLAG_MTF0: mailbox 0 transmit finished + \arg CAN_FLAG_RFO0: receive FIFO0 overfull + \arg CAN_FLAG_RFF0: receive FIFO0 full + \arg CAN_FLAG_RFO1: receive FIFO1 overfull + \arg CAN_FLAG_RFF1: receive FIFO1 full + \arg CAN_FLAG_BOERR: bus-off error + \arg CAN_FLAG_PERR: passive error + \arg CAN_FLAG_WERR: warning error + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus can_flag_get(uint32_t can_periph, can_flag_enum flag) +{ + /* get flag and interrupt enable state */ + if(RESET != (CAN_REG_VAL(can_periph, flag) & BIT(CAN_BIT_POS(flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear CAN flag state + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] flag: CAN flags, refer to can_flag_enum + only one parameter can be selected which is shown as below: + \arg CAN_FLAG_MTE2: mailbox 2 transmit error + \arg CAN_FLAG_MTE1: mailbox 1 transmit error + \arg CAN_FLAG_MTE0: mailbox 0 transmit error + \arg CAN_FLAG_MTF2: mailbox 2 transmit finished + \arg CAN_FLAG_MTF1: mailbox 1 transmit finished + \arg CAN_FLAG_MTF0: mailbox 0 transmit finished + \arg CAN_FLAG_RFO0: receive FIFO0 overfull + \arg CAN_FLAG_RFF0: receive FIFO0 full + \arg CAN_FLAG_RFO1: receive FIFO1 overfull + \arg CAN_FLAG_RFF1: receive FIFO1 full + \param[out] none + \retval none +*/ +void can_flag_clear(uint32_t can_periph, can_flag_enum flag) +{ + CAN_REG_VAL(can_periph, flag) |= BIT(CAN_BIT_POS(flag)); +} + +/*! + \brief get CAN interrupt flag state + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] flag: CAN interrupt flags, refer to can_interrupt_flag_enum + only one parameter can be selected which is shown as below: + \arg CAN_INT_FLAG_SLPIF: status change interrupt flag of sleep working mode entering + \arg CAN_INT_FLAG_WUIF: status change interrupt flag of wakeup from sleep working mode + \arg CAN_INT_FLAG_ERRIF: error interrupt flag + \arg CAN_INT_FLAG_MTF2: mailbox 2 transmit finished interrupt flag + \arg CAN_INT_FLAG_MTF1: mailbox 1 transmit finished interrupt flag + \arg CAN_INT_FLAG_MTF0: mailbox 0 transmit finished interrupt flag + \arg CAN_INT_FLAG_RFO0: receive FIFO0 overfull interrupt flag + \arg CAN_INT_FLAG_RFF0: receive FIFO0 full interrupt flag + \arg CAN_INT_FLAG_RFO1: receive FIFO1 overfull interrupt flag + \arg CAN_INT_FLAG_RFF1: receive FIFO1 full interrupt flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus can_interrupt_flag_get(uint32_t can_periph, can_interrupt_flag_enum flag) +{ + FlagStatus ret1 = RESET; + FlagStatus ret2 = RESET; + + /* get the staus of interrupt flag */ + ret1 = (FlagStatus)(CAN_REG_VALS(can_periph, flag) & BIT(CAN_BIT_POS0(flag))); + /* get the staus of interrupt enale bit */ + ret2 = (FlagStatus)(CAN_INTEN(can_periph) & BIT(CAN_BIT_POS1(flag))); + if(ret1 && ret2){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear CAN interrupt flag state + \param[in] can_periph + \arg CANx(x=0,1),the CAN1 only for GD32F10x_CL + \param[in] flag: CAN interrupt flags, refer to can_interrupt_flag_enum + only one parameter can be selected which is shown as below: + \arg CAN_INT_FLAG_SLPIF: status change interrupt flag of sleep working mode entering + \arg CAN_INT_FLAG_WUIF: status change interrupt flag of wakeup from sleep working mode + \arg CAN_INT_FLAG_ERRIF: error interrupt flag + \arg CAN_INT_FLAG_MTF2: mailbox 2 transmit finished interrupt flag + \arg CAN_INT_FLAG_MTF1: mailbox 1 transmit finished interrupt flag + \arg CAN_INT_FLAG_MTF0: mailbox 0 transmit finished interrupt flag + \arg CAN_INT_FLAG_RFO0: receive FIFO0 overfull interrupt flag + \arg CAN_INT_FLAG_RFF0: receive FIFO0 full interrupt flag + \arg CAN_INT_FLAG_RFO1: receive FIFO1 overfull interrupt flag + \arg CAN_INT_FLAG_RFF1: receive FIFO1 full interrupt flag + \param[out] none + \retval none +*/ +void can_interrupt_flag_clear(uint32_t can_periph, can_interrupt_flag_enum flag) +{ + CAN_REG_VALS(can_periph, flag) |= BIT(CAN_BIT_POS0(flag)); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_crc.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_crc.c new file mode 100644 index 0000000000000000000000000000000000000000..0173e9f507e74a3cd2de9252904157479cf8b53a --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_crc.c @@ -0,0 +1,131 @@ +/*! + \file gd32f10x_crc.c + \brief CRC driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_crc.h" + +#define CRC_DATA_RESET_VALUE ((uint32_t)0xFFFFFFFFU) +#define CRC_FDATA_RESET_VALUE ((uint32_t)0x00000000U) + +/*! + \brief deinit CRC calculation unit + \param[in] none + \param[out] none + \retval none +*/ +void crc_deinit(void) +{ + CRC_DATA = CRC_DATA_RESET_VALUE; + CRC_FDATA = CRC_FDATA_RESET_VALUE; + CRC_CTL = (uint32_t)CRC_CTL_RST; +} + +/*! + \brief reset data register to the value of initializaiton data register + \param[in] none + \param[out] none + \retval none +*/ +void crc_data_register_reset(void) +{ + CRC_CTL |= (uint32_t)CRC_CTL_RST; +} + +/*! + \brief read the value of the data register + \param[in] none + \param[out] none + \retval 32-bit value of the data register +*/ +uint32_t crc_data_register_read(void) +{ + uint32_t data; + data = CRC_DATA; + return (data); +} + +/*! + \brief read the value of the free data register + \param[in] none + \param[out] none + \retval 8-bit value of the free data register +*/ +uint8_t crc_free_data_register_read(void) +{ + uint8_t fdata; + fdata = (uint8_t)CRC_FDATA; + return (fdata); +} + +/*! + \brief write data to the free data register + \param[in] free_data: specify 8-bit data + \param[out] none + \retval none +*/ +void crc_free_data_register_write(uint8_t free_data) +{ + CRC_FDATA = (uint32_t)free_data; +} + +/*! + \brief calculate the CRC value of a 32-bit data + \param[in] sdata: specified 32-bit data + \param[out] none + \retval 32-bit value calculated by CRC +*/ +uint32_t crc_single_data_calculate(uint32_t sdata) +{ + CRC_DATA = sdata; + return (CRC_DATA); +} + +/*! + \brief calculate the CRC value of an array of 32-bit values + \param[in] array: pointer to an array of 32-bit values + \param[in] size: size of the array + \param[out] none + \retval 32-bit value calculated by CRC +*/ +uint32_t crc_block_data_calculate(uint32_t array[], uint32_t size) +{ + uint32_t index; + for(index = 0U; index < size; index++){ + CRC_DATA = array[index]; + } + return (CRC_DATA); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dac.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dac.c new file mode 100644 index 0000000000000000000000000000000000000000..b5114a2739842bb186a26cfd6ccf80ea3a57eee1 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dac.c @@ -0,0 +1,559 @@ +/*! + \file gd32f10x_dac.c + \brief DAC driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_dac.h" + +/* DAC register bit offset */ +#define DAC1_REG_OFFSET ((uint32_t)16U) +#define DH_12BIT_OFFSET ((uint32_t)16U) +#define DH_8BIT_OFFSET ((uint32_t)8U) + +/*! + \brief deinitialize DAC + \param[in] none + \param[out] none + \retval none +*/ +void dac_deinit(void) +{ + rcu_periph_reset_enable(RCU_DACRST); + rcu_periph_reset_disable(RCU_DACRST); +} + +/*! + \brief enable DAC + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_enable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL |= DAC_CTL_DEN0; + }else{ + DAC_CTL |= DAC_CTL_DEN1; + } +} + +/*! + \brief disable DAC + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_disable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL &= ~DAC_CTL_DEN0; + }else{ + DAC_CTL &= ~DAC_CTL_DEN1; + } +} + +/*! + \brief enable DAC DMA function + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_dma_enable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL |= DAC_CTL_DDMAEN0; + }else{ + DAC_CTL |= DAC_CTL_DDMAEN1; + } +} + +/*! + \brief disable DAC DMA function + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_dma_disable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL &= ~DAC_CTL_DDMAEN0; + }else{ + DAC_CTL &= ~DAC_CTL_DDMAEN1; + } +} + +/*! + \brief enable DAC output buffer + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_output_buffer_enable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL &= ~DAC_CTL_DBOFF0; + }else{ + DAC_CTL &= ~DAC_CTL_DBOFF1; + } +} + +/*! + \brief disable DAC output buffer + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_output_buffer_disable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL |= DAC_CTL_DBOFF0; + }else{ + DAC_CTL |= DAC_CTL_DBOFF1; + } +} + +/*! + \brief get DAC output value + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval DAC output data +*/ +uint16_t dac_output_value_get(uint32_t dac_periph) +{ + uint16_t data = 0U; + if(DAC0 == dac_periph){ + /* store the DAC0 output value */ + data = (uint16_t)DAC0_DO; + }else{ + /* store the DAC1 output value */ + data = (uint16_t)DAC1_DO; + } + return data; +} + +/*! + \brief set the DAC specified data holding register value + \param[in] dac_periph + \arg DACx(x=0,1) + \param[in] dac_align + only one parameter can be selected which is shown as below: + \arg DAC_ALIGN_8B_R: data right 8b alignment + \arg DAC_ALIGN_12B_R: data right 12b alignment + \arg DAC_ALIGN_12B_L: data left 12b alignment + \param[in] data: data to be loaded + \param[out] none + \retval none +*/ +void dac_data_set(uint32_t dac_periph, uint32_t dac_align, uint16_t data) +{ + if(DAC0 == dac_periph){ + switch(dac_align){ + /* data right 12b alignment */ + case DAC_ALIGN_12B_R: + DAC0_R12DH = data; + break; + /* data left 12b alignment */ + case DAC_ALIGN_12B_L: + DAC0_L12DH = data; + break; + /* data right 8b alignment */ + case DAC_ALIGN_8B_R: + DAC0_R8DH = data; + break; + default: + break; + } + }else{ + switch(dac_align){ + /* data right 12b alignment */ + case DAC_ALIGN_12B_R: + DAC1_R12DH = data; + break; + /* data left 12b alignment */ + case DAC_ALIGN_12B_L: + DAC1_L12DH = data; + break; + /* data right 8b alignment */ + case DAC_ALIGN_8B_R: + DAC1_R8DH = data; + break; + default: + break; + } + } +} + +/*! + \brief enable DAC trigger + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_trigger_enable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL |= DAC_CTL_DTEN0; + }else{ + DAC_CTL |= DAC_CTL_DTEN1; + } +} + +/*! + \brief disable DAC trigger + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_trigger_disable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_CTL &= ~DAC_CTL_DTEN0; + }else{ + DAC_CTL &= ~DAC_CTL_DTEN1; + } +} + +/*! + \brief set DAC trigger source + \param[in] dac_periph + \arg DACx(x=0,1) + \param[in] triggersource: external triggers of DAC + only one parameter can be selected which is shown as below: + \arg DAC_TRIGGER_T1_TRGO: TIMER1 TRGO + \arg DAC_TRIGGER_T2_TRGO: TIMER2 TRGO (for GD32F10X_CL) + \arg DAC_TRIGGER_T3_TRGO: TIMER3 TRGO + \arg DAC_TRIGGER_T4_TRGO: TIMER4 TRGO + \arg DAC_TRIGGER_T5_TRGO: TIMER5 TRGO + \arg DAC_TRIGGER_T6_TRGO: TIMER6 TRGO + \arg DAC_TRIGGER_T7_TRGO: TIMER7 TRGO (for GD32F10X_MD and GD32F10X_HD and GD32F10X_XD) + \arg DAC_TRIGGER_EXTI_9: EXTI interrupt line9 event + \arg DAC_TRIGGER_SOFTWARE: software trigger + \param[out] none + \retval none +*/ +void dac_trigger_source_config(uint32_t dac_periph,uint32_t triggersource) +{ + if(DAC0 == dac_periph){ + /* configure DAC0 trigger source */ + DAC_CTL &= ~DAC_CTL_DTSEL0; + DAC_CTL |= triggersource; + }else{ + /* configure DAC1 trigger source */ + DAC_CTL &= ~DAC_CTL_DTSEL1; + DAC_CTL |= (triggersource << DAC1_REG_OFFSET); + } +} + +/*! + \brief enable DAC software trigger + \param[in] dac_periph + \arg DACx(x=0,1) + \retval none +*/ +void dac_software_trigger_enable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_SWT |= DAC_SWT_SWTR0; + }else{ + DAC_SWT |= DAC_SWT_SWTR1; + } +} + +/*! + \brief disable DAC software trigger + \param[in] dac_periph + \arg DACx(x=0,1) + \param[out] none + \retval none +*/ +void dac_software_trigger_disable(uint32_t dac_periph) +{ + if(DAC0 == dac_periph){ + DAC_SWT &= ~DAC_SWT_SWTR0; + }else{ + DAC_SWT &= ~DAC_SWT_SWTR1; + } +} + +/*! + \brief configure DAC wave mode + \param[in] dac_periph + \arg DACx(x=0,1) + \param[in] wave_mode + only one parameter can be selected which is shown as below: + \arg DAC_WAVE_DISABLE: wave disable + \arg DAC_WAVE_MODE_LFSR: LFSR noise mode + \arg DAC_WAVE_MODE_TRIANGLE: triangle noise mode + \param[out] none + \retval none +*/ +void dac_wave_mode_config(uint32_t dac_periph, uint32_t wave_mode) +{ + if(DAC0 == dac_periph){ + /* configure DAC0 wave mode */ + DAC_CTL &= ~DAC_CTL_DWM0; + DAC_CTL |= wave_mode; + }else{ + /* configure DAC1 wave mode */ + DAC_CTL &= ~DAC_CTL_DWM1; + DAC_CTL |= (wave_mode << DAC1_REG_OFFSET); + } +} + +/*! + \brief configure DAC wave bit width + \param[in] dac_periph + \arg DACx(x=0,1) + \param[in] bit_width + only one parameter can be selected which is shown as below: + \arg DAC_WAVE_BIT_WIDTH_1: bit width of the wave signal is 1 + \arg DAC_WAVE_BIT_WIDTH_2: bit width of the wave signal is 2 + \arg DAC_WAVE_BIT_WIDTH_3: bit width of the wave signal is 3 + \arg DAC_WAVE_BIT_WIDTH_4: bit width of the wave signal is 4 + \arg DAC_WAVE_BIT_WIDTH_5: bit width of the wave signal is 5 + \arg DAC_WAVE_BIT_WIDTH_6: bit width of the wave signal is 6 + \arg DAC_WAVE_BIT_WIDTH_7: bit width of the wave signal is 7 + \arg DAC_WAVE_BIT_WIDTH_8: bit width of the wave signal is 8 + \arg DAC_WAVE_BIT_WIDTH_9: bit width of the wave signal is 9 + \arg DAC_WAVE_BIT_WIDTH_10: bit width of the wave signal is 10 + \arg DAC_WAVE_BIT_WIDTH_11: bit width of the wave signal is 11 + \arg DAC_WAVE_BIT_WIDTH_12: bit width of the wave signal is 12 + \param[out] none + \retval none +*/ +void dac_wave_bit_width_config(uint32_t dac_periph, uint32_t bit_width) +{ + if(DAC0 == dac_periph){ + /* configure DAC0 wave bit width */ + DAC_CTL &= ~DAC_CTL_DWBW0; + DAC_CTL |= bit_width; + }else{ + /* configure DAC1 wave bit width */ + DAC_CTL &= ~DAC_CTL_DWBW1; + DAC_CTL |= (bit_width << DAC1_REG_OFFSET); + } +} + +/*! + \brief configure DAC LFSR noise mode + \param[in] dac_periph + \arg DACx(x=0,1) + \param[in] unmask_bits + only one parameter can be selected which is shown as below: + \arg DAC_LFSR_BIT0: unmask the LFSR bit0 + \arg DAC_LFSR_BITS1_0: unmask the LFSR bits[1:0] + \arg DAC_LFSR_BITS2_0: unmask the LFSR bits[2:0] + \arg DAC_LFSR_BITS3_0: unmask the LFSR bits[3:0] + \arg DAC_LFSR_BITS4_0: unmask the LFSR bits[4:0] + \arg DAC_LFSR_BITS5_0: unmask the LFSR bits[5:0] + \arg DAC_LFSR_BITS6_0: unmask the LFSR bits[6:0] + \arg DAC_LFSR_BITS7_0: unmask the LFSR bits[7:0] + \arg DAC_LFSR_BITS8_0: unmask the LFSR bits[8:0] + \arg DAC_LFSR_BITS9_0: unmask the LFSR bits[9:0] + \arg DAC_LFSR_BITS10_0: unmask the LFSR bits[10:0] + \arg DAC_LFSR_BITS11_0: unmask the LFSR bits[11:0] + \param[out] none + \retval none +*/ +void dac_lfsr_noise_config(uint32_t dac_periph, uint32_t unmask_bits) +{ + if(DAC0 == dac_periph){ + /* configure DAC0 LFSR noise mode */ + DAC_CTL &= ~DAC_CTL_DWBW0; + DAC_CTL |= unmask_bits; + }else{ + /* configure DAC1 LFSR noise mode */ + DAC_CTL &= ~DAC_CTL_DWBW1; + DAC_CTL |= (unmask_bits << DAC1_REG_OFFSET); + } +} + +/*! + \brief configure DAC triangle noise mode + \param[in] dac_periph + \arg DACx(x=0,1) + \param[in] amplitude + only one parameter can be selected which is shown as below: + \arg DAC_TRIANGLE_AMPLITUDE_1: triangle amplitude is 1 + \arg DAC_TRIANGLE_AMPLITUDE_3: triangle amplitude is 3 + \arg DAC_TRIANGLE_AMPLITUDE_7: triangle amplitude is 7 + \arg DAC_TRIANGLE_AMPLITUDE_15: triangle amplitude is 15 + \arg DAC_TRIANGLE_AMPLITUDE_31: triangle amplitude is 31 + \arg DAC_TRIANGLE_AMPLITUDE_63: triangle amplitude is 63 + \arg DAC_TRIANGLE_AMPLITUDE_127: triangle amplitude is 127 + \arg DAC_TRIANGLE_AMPLITUDE_255: triangle amplitude is 255 + \arg DAC_TRIANGLE_AMPLITUDE_511: triangle amplitude is 511 + \arg DAC_TRIANGLE_AMPLITUDE_1023: triangle amplitude is 1023 + \arg DAC_TRIANGLE_AMPLITUDE_2047: triangle amplitude is 2047 + \arg DAC_TRIANGLE_AMPLITUDE_4095: triangle amplitude is 4095 + \param[out] none + \retval none +*/ +void dac_triangle_noise_config(uint32_t dac_periph, uint32_t amplitude) +{ + if(DAC0 == dac_periph){ + /* configure DAC0 triangle noise mode */ + DAC_CTL &= ~DAC_CTL_DWBW0; + DAC_CTL |= amplitude; + }else{ + /* configure DAC1 triangle noise mode */ + DAC_CTL &= ~DAC_CTL_DWBW1; + DAC_CTL |= (amplitude << DAC1_REG_OFFSET); + } +} + +/*! + \brief enable DAC concurrent mode + \param[in] none + \param[out] none + \retval none +*/ +void dac_concurrent_enable(void) +{ + uint32_t ctl = 0U; + ctl = DAC_CTL_DEN0 | DAC_CTL_DEN1; + DAC_CTL |= (ctl); +} + +/*! + \brief disable DAC concurrent mode + \param[in] none + \param[out] none + \retval none +*/ +void dac_concurrent_disable(void) +{ + uint32_t ctl = 0U; + ctl = DAC_CTL_DEN0 | DAC_CTL_DEN1; + DAC_CTL &= (~ctl); +} + +/*! + \brief enable DAC concurrent software trigger function + \param[in] none + \param[out] none + \retval none +*/ +void dac_concurrent_software_trigger_enable(void) +{ + uint32_t swt = 0U; + swt = DAC_SWT_SWTR0 | DAC_SWT_SWTR1; + DAC_SWT |= (swt); +} + +/*! + \brief disable DAC concurrent software trigger function + \param[in] none + \param[out] none + \retval none +*/ +void dac_concurrent_software_trigger_disable(void) +{ + uint32_t swt = 0U; + swt = DAC_SWT_SWTR0 | DAC_SWT_SWTR1; + DAC_SWT &= (~swt); +} + +/*! + \brief enable DAC concurrent buffer function + \param[in] none + \param[out] none + \retval none +*/ +void dac_concurrent_output_buffer_enable(void) +{ + uint32_t ctl = 0U; + ctl = DAC_CTL_DBOFF0 | DAC_CTL_DBOFF1; + DAC_CTL &= (~ctl); +} + +/*! + \brief disable DAC concurrent buffer function + \param[in] none + \param[out] none + \retval none +*/ +void dac_concurrent_output_buffer_disable(void) +{ + uint32_t ctl = 0U; + ctl = DAC_CTL_DBOFF0 | DAC_CTL_DBOFF1; + DAC_CTL |= (ctl); +} + +/*! + \brief set DAC concurrent mode data holding register value + \param[in] dac_align + only one parameter can be selected which is shown as below: + \arg DAC_ALIGN_8B_R: data right 8b alignment + \arg DAC_ALIGN_12B_R: data right 12b alignment + \arg DAC_ALIGN_12B_L: data left 12b alignment + \param[in] data0: data to be loaded + \param[in] data1: data to be loaded + \param[out] none + \retval none +*/ +void dac_concurrent_data_set(uint32_t dac_align, uint16_t data0, uint16_t data1) +{ + uint32_t data = 0U; + switch(dac_align){ + /* data right 12b alignment */ + case DAC_ALIGN_12B_R: + data = ((uint32_t)data1 << DH_12BIT_OFFSET) | data0; + DACC_R12DH = data; + break; + /* data left 12b alignment */ + case DAC_ALIGN_12B_L: + data = ((uint32_t)data1 << DH_12BIT_OFFSET) | data0; + DACC_L12DH = data; + break; + /* data right 8b alignment */ + case DAC_ALIGN_8B_R: + data = ((uint32_t)data1 << DH_8BIT_OFFSET) | data0; + DACC_R8DH = data; + break; + default: + break; + } +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dbg.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dbg.c new file mode 100644 index 0000000000000000000000000000000000000000..f8b74c727fe74d7b1b17458533c847991b396a59 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dbg.c @@ -0,0 +1,153 @@ +/*! + \file gd32f10x_dbg.c + \brief DBG driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_dbg.h" + +/*! + \brief read DBG_ID code register + \param[in] none + \param[out] none + \retval DBG_ID code +*/ +uint32_t dbg_id_get(void) +{ + return DBG_ID; +} + +/*! + \brief enable low power behavior when the mcu is in debug mode + \param[in] dbg_low_power: + one or more parameters can be selected which are shown as below: + \arg DBG_LOW_POWER_SLEEP: keep debugger connection during sleep mode + \arg DBG_LOW_POWER_DEEPSLEEP: keep debugger connection during deepsleep mode + \arg DBG_LOW_POWER_STANDBY: keep debugger connection during standby mode + \param[out] none + \retval none +*/ +void dbg_low_power_enable(uint32_t dbg_low_power) +{ + DBG_CTL |= dbg_low_power; +} + +/*! + \brief disable low power behavior when the mcu is in debug mode + \param[in] dbg_low_power: + one or more parameters can be selected which are shown as below: + \arg DBG_LOW_POWER_SLEEP: donot keep debugger connection during sleep mode + \arg DBG_LOW_POWER_DEEPSLEEP: donot keep debugger connection during deepsleep mode + \arg DBG_LOW_POWER_STANDBY: donot keep debugger connection during standby mode + \param[out] none + \retval none +*/ +void dbg_low_power_disable(uint32_t dbg_low_power) +{ + DBG_CTL &= ~dbg_low_power; +} + +/*! + \brief enable peripheral behavior when the mcu is in debug mode + \param[in] dbg_periph: refer to dbg_periph_enum + one or more parameters can be selected which are shown as below: + \arg DBG_FWDGT_HOLD : debug FWDGT kept when core is halted + \arg DBG_WWDGT_HOLD : debug WWDGT kept when core is halted + \arg DBG_CANx_HOLD (x=0,1,CAN1 is only available for CL series): hold CANx counter when core is halted + \arg DBG_I2Cx_HOLD (x=0,1): hold I2Cx smbus when core is halted + \arg DBG_TIMERx_HOLD (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are not available for HD series): hold TIMERx counter when core is halted + \param[out] none + \retval none +*/ +void dbg_periph_enable(dbg_periph_enum dbg_periph) +{ + DBG_CTL |= (uint32_t)dbg_periph; +} + +/*! + \brief disable peripheral behavior when the mcu is in debug mode + \param[in] dbg_periph: refer to dbg_periph_enum + one or more parameters can be selected which are shown as below: + \arg DBG_FWDGT_HOLD : debug FWDGT kept when core is halted + \arg DBG_WWDGT_HOLD : debug WWDGT kept when core is halted + \arg DBG_CANx_HOLD (x=0,1,CAN1 is only available for CL series): hold CAN0 counter when core is halted + \arg DBG_I2Cx_HOLD (x=0,1): hold I2Cx smbus when core is halted + \arg DBG_TIMERx_HOLD (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are only available for XD and CL series): hold TIMERx counter when core is halted + \param[out] none + \retval none +*/ +void dbg_periph_disable(dbg_periph_enum dbg_periph) +{ + DBG_CTL &= ~(uint32_t)dbg_periph; +} + +/*! + \brief enable trace pin assignment + \param[in] none + \param[out] none + \retval none +*/ +void dbg_trace_pin_enable(void) +{ + DBG_CTL |= DBG_CTL_TRACE_IOEN; +} + +/*! + \brief disable trace pin assignment + \param[in] none + \param[out] none + \retval none +*/ +void dbg_trace_pin_disable(void) +{ + DBG_CTL &= ~DBG_CTL_TRACE_IOEN; +} + +/*! + \brief trace pin mode selection + \param[in] trace_mode: + only one parameter can be selected which is shown as below: + \arg TRACE_MODE_ASYNC: trace pin used for async mode + \arg TRACE_MODE_SYNC_DATASIZE_1: trace pin used for sync mode and data size is 1 + \arg TRACE_MODE_SYNC_DATASIZE_2: trace pin used for sync mode and data size is 2 + \arg TRACE_MODE_SYNC_DATASIZE_4: trace pin used for sync mode and data size is 4 + \param[out] none + \retval none +*/ +void dbg_trace_pin_mode_set(uint32_t trace_mode) +{ + DBG_CTL &= ~DBG_CTL_TRACE_MODE; + DBG_CTL |= trace_mode; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dma.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dma.c new file mode 100644 index 0000000000000000000000000000000000000000..801d69130da3bb30522c429ae2d744d751c5c2ae --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_dma.c @@ -0,0 +1,737 @@ +/*! + \file gd32f10x_dma.c + \brief DMA driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_dma.h" + +#define DMA_WRONG_HANDLE while(1){} + + /* check whether peripheral matches channels or not */ +static ErrStatus dma_periph_and_channel_check(uint32_t dma_periph, dma_channel_enum channelx); + +/*! + \brief deinitialize DMA a channel registers + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel is deinitialized + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_deinit(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + /* disable DMA a channel */ + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_CHEN; + /* reset DMA channel registers */ + DMA_CHCTL(dma_periph, channelx) = DMA_CHCTL_RESET_VALUE; + DMA_CHCNT(dma_periph, channelx) = DMA_CHCNT_RESET_VALUE; + DMA_CHPADDR(dma_periph, channelx) = DMA_CHPADDR_RESET_VALUE; + DMA_CHMADDR(dma_periph, channelx) = DMA_CHMADDR_RESET_VALUE; + DMA_INTC(dma_periph) |= DMA_FLAG_ADD(DMA_CHINTF_RESET_VALUE, channelx); +} + +/*! + \brief initialize the parameters of DMA struct with the default values + \param[in] init_struct: the initialization data needed to initialize DMA channel + \param[out] none + \retval none +*/ +void dma_struct_para_init(dma_parameter_struct* init_struct) +{ + /* set the DMA struct with the default values */ + init_struct->periph_addr = 0U; + init_struct->periph_width = 0U; + init_struct->periph_inc = (uint8_t)DMA_PERIPH_INCREASE_DISABLE; + init_struct->memory_addr = 0U; + init_struct->memory_width = 0U; + init_struct->memory_inc = (uint8_t)DMA_MEMORY_INCREASE_DISABLE; + init_struct->number = 0U; + init_struct->direction = (uint8_t)DMA_PERIPHERAL_TO_MEMORY; + init_struct->priority = DMA_PRIORITY_LOW; +} + +/*! + \brief initialize DMA channel + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel is initialized + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] init_struct: the data needed to initialize DMA channel + periph_addr: peripheral base address + periph_width: DMA_PERIPHERAL_WIDTH_8BIT, DMA_PERIPHERAL_WIDTH_16BIT, DMA_PERIPHERAL_WIDTH_32BIT + periph_inc: DMA_PERIPH_INCREASE_ENABLE, DMA_PERIPH_INCREASE_DISABLE + memory_addr: memory base address + memory_width: DMA_MEMORY_WIDTH_8BIT, DMA_MEMORY_WIDTH_16BIT, DMA_MEMORY_WIDTH_32BIT + memory_inc: DMA_MEMORY_INCREASE_ENABLE, DMA_MEMORY_INCREASE_DISABLE + direction: DMA_PERIPHERAL_TO_MEMORY, DMA_MEMORY_TO_PERIPHERAL + number: the number of remaining data to be transferred by the DMA + priority: DMA_PRIORITY_LOW, DMA_PRIORITY_MEDIUM, DMA_PRIORITY_HIGH, DMA_PRIORITY_ULTRA_HIGH + \param[out] none + \retval none +*/ +void dma_init(uint32_t dma_periph, dma_channel_enum channelx, dma_parameter_struct *init_struct) +{ + uint32_t ctl; + + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + /* configure peripheral base address */ + DMA_CHPADDR(dma_periph, channelx) = init_struct->periph_addr; + + /* configure memory base address */ + DMA_CHMADDR(dma_periph, channelx) = init_struct->memory_addr; + + /* configure the number of remaining data to be transferred */ + DMA_CHCNT(dma_periph, channelx) = (init_struct->number & DMA_CHANNEL_CNT_MASK); + + /* configure peripheral transfer width,memory transfer width, */ + ctl = DMA_CHCTL(dma_periph, channelx); + ctl &= ~(DMA_CHXCTL_PWIDTH | DMA_CHXCTL_MWIDTH | DMA_CHXCTL_PRIO); + ctl |= (init_struct->periph_width | init_struct->memory_width | init_struct->priority); + DMA_CHCTL(dma_periph, channelx) = ctl; + + /* configure peripheral increasing mode */ + if(DMA_PERIPH_INCREASE_ENABLE == init_struct->periph_inc){ + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_PNAGA; + }else{ + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_PNAGA; + } + + /* configure memory increasing mode */ + if(DMA_MEMORY_INCREASE_ENABLE == init_struct->memory_inc){ + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_MNAGA; + }else{ + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_MNAGA; + } + + /* configure the direction of data transfer */ + if(DMA_PERIPHERAL_TO_MEMORY == init_struct->direction){ + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_DIR; + }else{ + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_DIR; + } +} + +/*! + \brief enable DMA circulation mode + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_circulation_enable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_CMEN; +} + +/*! + \brief disable DMA circulation mode + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_circulation_disable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_CMEN; +} + +/*! + \brief enable memory to memory mode + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_memory_to_memory_enable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_M2M; +} + +/*! + \brief disable memory to memory mode + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_memory_to_memory_disable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_M2M; +} + +/*! + \brief enable DMA channel + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_channel_enable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_CHEN; +} + +/*! + \brief disable DMA channel + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_channel_disable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_CHEN; +} + +/*! + \brief set DMA peripheral base address + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to set peripheral base address + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] address: peripheral base address + \param[out] none + \retval none +*/ +void dma_periph_address_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t address) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHPADDR(dma_periph, channelx) = address; +} + +/*! + \brief set DMA memory base address + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to set memory base address + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] address: memory base address + \param[out] none + \retval none +*/ +void dma_memory_address_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t address) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHMADDR(dma_periph, channelx) = address; +} + +/*! + \brief set the number of remaining data to be transferred by the DMA + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to set number + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] number: the number of remaining data to be transferred by the DMA + \arg 0x0000-0xFFFF + \param[out] none + \retval none +*/ +void dma_transfer_number_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t number) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCNT(dma_periph, channelx) = (number & DMA_CHANNEL_CNT_MASK); +} + +/*! + \brief get the number of remaining data to be transferred by the DMA + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to set number + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval uint32_t: the number of remaining data to be transferred by the DMA +*/ +uint32_t dma_transfer_number_get(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + return (uint32_t)DMA_CHCNT(dma_periph, channelx); +} + +/*! + \brief configure priority level of DMA channel + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] priority: priority Level of this channel + only one parameter can be selected which is shown as below: + \arg DMA_PRIORITY_LOW: low priority + \arg DMA_PRIORITY_MEDIUM: medium priority + \arg DMA_PRIORITY_HIGH: high priority + \arg DMA_PRIORITY_ULTRA_HIGH: ultra high priority + \param[out] none + \retval none +*/ +void dma_priority_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t priority) +{ + uint32_t ctl; + + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + /* acquire DMA_CHxCTL register */ + ctl = DMA_CHCTL(dma_periph, channelx); + /* assign regiser */ + ctl &= ~DMA_CHXCTL_PRIO; + ctl |= priority; + DMA_CHCTL(dma_periph, channelx) = ctl; +} + +/*! + \brief configure transfer data size of memory + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] mwidth: transfer data width of memory + only one parameter can be selected which is shown as below: + \arg DMA_MEMORY_WIDTH_8BIT: transfer data width of memory is 8-bit + \arg DMA_MEMORY_WIDTH_16BIT: transfer data width of memory is 16-bit + \arg DMA_MEMORY_WIDTH_32BIT: transfer data width of memory is 32-bit + \param[out] none + \retval none +*/ +void dma_memory_width_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t mwidth) +{ + uint32_t ctl; + + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + /* acquire DMA_CHxCTL register */ + ctl = DMA_CHCTL(dma_periph, channelx); + /* assign regiser */ + ctl &= ~DMA_CHXCTL_MWIDTH; + ctl |= mwidth; + DMA_CHCTL(dma_periph, channelx) = ctl; +} + +/*! + \brief configure transfer data size of peripheral + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] pwidth: transfer data width of peripheral + only one parameter can be selected which is shown as below: + \arg DMA_PERIPHERAL_WIDTH_8BIT: transfer data width of peripheral is 8-bit + \arg DMA_PERIPHERAL_WIDTH_16BIT: transfer data width of peripheral is 16-bit + \arg DMA_PERIPHERAL_WIDTH_32BIT: transfer data width of peripheral is 32-bit + \param[out] none + \retval none +*/ +void dma_periph_width_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t pwidth) +{ + uint32_t ctl; + + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + /* acquire DMA_CHxCTL register */ + ctl = DMA_CHCTL(dma_periph, channelx); + /* assign regiser */ + ctl &= ~DMA_CHXCTL_PWIDTH; + ctl |= pwidth; + DMA_CHCTL(dma_periph, channelx) = ctl; +} + +/*! + \brief enable next address increasement algorithm of memory + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_memory_increase_enable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_MNAGA; +} + +/*! + \brief disable next address increasement algorithm of memory + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_memory_increase_disable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_MNAGA; +} + +/*! + \brief enable next address increasement algorithm of peripheral + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_periph_increase_enable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_PNAGA; +} + +/*! + \brief disable next address increasement algorithm of peripheral + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[out] none + \retval none +*/ +void dma_periph_increase_disable(uint32_t dma_periph, dma_channel_enum channelx) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_PNAGA; +} + +/*! + \brief configure the direction of data transfer on the channel + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] direction: specify the direction of data transfer + only one parameter can be selected which is shown as below: + \arg DMA_PERIPHERAL_TO_MEMORY: read from peripheral and write to memory + \arg DMA_MEMORY_TO_PERIPHERAL: read from memory and write to peripheral + \param[out] none + \retval none +*/ +void dma_transfer_direction_config(uint32_t dma_periph, dma_channel_enum channelx, uint32_t direction) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + if(DMA_PERIPHERAL_TO_MEMORY == direction){ + DMA_CHCTL(dma_periph, channelx) &= ~DMA_CHXCTL_DIR; + } else { + DMA_CHCTL(dma_periph, channelx) |= DMA_CHXCTL_DIR; + } +} + +/*! + \brief check DMA flag is set or not + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to get flag + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] flag: specify get which flag + only one parameter can be selected which is shown as below: + \arg DMA_FLAG_G: global interrupt flag of channel + \arg DMA_FLAG_FTF: full transfer finish flag of channel + \arg DMA_FLAG_HTF: half transfer finish flag of channel + \arg DMA_FLAG_ERR: error flag of channel + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus dma_flag_get(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag) +{ + FlagStatus reval; + + /* check whether the flag is set or not */ + if(RESET != (DMA_INTF(dma_periph) & DMA_FLAG_ADD(flag, channelx))){ + reval = SET; + }else{ + reval = RESET; + } + + return reval; +} + +/*! + \brief clear the flag of a DMA channel + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to clear flag + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] flag: specify get which flag + only one parameter can be selected which is shown as below: + \arg DMA_FLAG_G: global interrupt flag of channel + \arg DMA_FLAG_FTF: full transfer finish flag of channel + \arg DMA_FLAG_HTF: half transfer finish flag of channel + \arg DMA_FLAG_ERR: error flag of channel + \param[out] none + \retval none +*/ +void dma_flag_clear(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag) +{ + DMA_INTC(dma_periph) |= DMA_FLAG_ADD(flag, channelx); +} + +/*! + \brief check DMA flag and interrupt enable bit is set or not + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to get flag + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] flag: specify get which flag + only one parameter can be selected which is shown as below: + \arg DMA_INT_FLAG_FTF: full transfer finish interrupt flag of channel + \arg DMA_INT_FLAG_HTF: half transfer finish interrupt flag of channel + \arg DMA_INT_FLAG_ERR: error interrupt flag of channel + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus dma_interrupt_flag_get(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag) +{ + uint32_t interrupt_enable = 0U, interrupt_flag = 0U; + + switch(flag){ + case DMA_INT_FLAG_FTF: + /* check whether the full transfer finish interrupt flag is set and enabled */ + interrupt_flag = DMA_INTF(dma_periph) & DMA_FLAG_ADD(flag, channelx); + interrupt_enable = DMA_CHCTL(dma_periph, channelx) & DMA_CHXCTL_FTFIE; + break; + case DMA_INT_FLAG_HTF: + /* check whether the half transfer finish interrupt flag is set and enabled */ + interrupt_flag = DMA_INTF(dma_periph) & DMA_FLAG_ADD(flag, channelx); + interrupt_enable = DMA_CHCTL(dma_periph, channelx) & DMA_CHXCTL_HTFIE; + break; + case DMA_INT_FLAG_ERR: + /* check whether the error interrupt flag is set and enabled */ + interrupt_flag = DMA_INTF(dma_periph) & DMA_FLAG_ADD(flag, channelx); + interrupt_enable = DMA_CHCTL(dma_periph, channelx) & DMA_CHXCTL_ERRIE; + break; + default: + DMA_WRONG_HANDLE + } + + /* when the interrupt flag is set and enabled, return SET */ + if(interrupt_flag && interrupt_enable){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear DMA a channel flag + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel to clear flag + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] flag: specify get which flag + only one parameter can be selected which is shown as below: + \arg DMA_INT_FLAG_G: global interrupt flag of channel + \arg DMA_INT_FLAG_FTF: full transfer finish interrupt flag of channel + \arg DMA_INT_FLAG_HTF: half transfer finish interrupt flag of channel + \arg DMA_INT_FLAG_ERR: error interrupt flag of channel + \param[out] none + \retval none +*/ +void dma_interrupt_flag_clear(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag) +{ + DMA_INTC(dma_periph) |= DMA_FLAG_ADD(flag, channelx); +} + +/*! + \brief enable DMA interrupt + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] source: specify which interrupt to enbale + one or more parameters can be selected which are shown as below + \arg DMA_INT_FTF: channel full transfer finish interrupt + \arg DMA_INT_HTF: channel half transfer finish interrupt + \arg DMA_INT_ERR: channel error interrupt + \param[out] none + \retval none +*/ +void dma_interrupt_enable(uint32_t dma_periph, dma_channel_enum channelx, uint32_t source) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) |= source; +} + +/*! + \brief disable DMA interrupt + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA0: DMA_CHx(x=0..6), DMA1: DMA_CHx(x=0..4) + \param[in] source: specify which interrupt to disbale + one or more parameters can be selected which are shown as below + \arg DMA_INT_FTF: channel full transfer finish interrupt + \arg DMA_INT_HTF: channel half transfer finish interrupt + \arg DMA_INT_ERR: channel error interrupt + \param[out] none + \retval none +*/ +void dma_interrupt_disable(uint32_t dma_periph, dma_channel_enum channelx, uint32_t source) +{ + if(ERROR == dma_periph_and_channel_check(dma_periph, channelx)){ + DMA_WRONG_HANDLE + } + + DMA_CHCTL(dma_periph, channelx) &= ~source; +} + +/*! + \brief check whether peripheral and channels match + \param[in] dma_periph: DMAx(x=0,1) + \arg DMAx(x=0,1) + \param[in] channelx: specify which DMA channel + only one parameter can be selected which is shown as below: + \arg DMA_CHx(x=0..6) + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +static ErrStatus dma_periph_and_channel_check(uint32_t dma_periph, dma_channel_enum channelx) +{ + ErrStatus val = SUCCESS; + + if(DMA1 == dma_periph){ + /* for DMA1, the channel is from DMA_CH0 to DMA_CH4 */ + if(channelx > DMA_CH4){ + val = ERROR; + } + } + + return val; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_enet.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_enet.c new file mode 100644 index 0000000000000000000000000000000000000000..e614de1670efdc30765e50ad7134921e6539a18e --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_enet.c @@ -0,0 +1,3074 @@ +/*! + \file gd32f10x_enet.c + \brief ENET driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_enet.h" + +#ifdef GD32F10X_CL + +#if defined (__CC_ARM) /*!< ARM compiler */ +__align(4) +enet_descriptors_struct rxdesc_tab[ENET_RXBUF_NUM]; /*!< ENET RxDMA descriptor */ +__align(4) +enet_descriptors_struct txdesc_tab[ENET_TXBUF_NUM]; /*!< ENET TxDMA descriptor */ +__align(4) +uint8_t rx_buff[ENET_RXBUF_NUM][ENET_RXBUF_SIZE]; /*!< ENET receive buffer */ +__align(4) +uint8_t tx_buff[ENET_TXBUF_NUM][ENET_TXBUF_SIZE]; /*!< ENET transmit buffer */ + +#elif defined ( __ICCARM__ ) /*!< IAR compiler */ +#pragma data_alignment=4 +enet_descriptors_struct rxdesc_tab[ENET_RXBUF_NUM]; /*!< ENET RxDMA descriptor */ +#pragma data_alignment=4 +enet_descriptors_struct txdesc_tab[ENET_TXBUF_NUM]; /*!< ENET TxDMA descriptor */ +#pragma data_alignment=4 +uint8_t rx_buff[ENET_RXBUF_NUM][ENET_RXBUF_SIZE]; /*!< ENET receive buffer */ +#pragma data_alignment=4 +uint8_t tx_buff[ENET_TXBUF_NUM][ENET_TXBUF_SIZE]; /*!< ENET transmit buffer */ + +#endif /* __CC_ARM */ + +/* global transmit and receive descriptors pointers */ +enet_descriptors_struct *dma_current_txdesc; +enet_descriptors_struct *dma_current_rxdesc; + +/* structure pointer of ptp descriptor for normal mode */ +enet_descriptors_struct *dma_current_ptp_txdesc = NULL; +enet_descriptors_struct *dma_current_ptp_rxdesc = NULL; + +/* init structure parameters for ENET initialization */ +static enet_initpara_struct enet_initpara ={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; + +static uint32_t enet_unknow_err = 0U; + +/* array of register offset for debug information get */ +static const uint16_t enet_reg_tab[] = { +0x0000, 0x0004, 0x0008, 0x000C, 0x0010, 0x0014, 0x0018, 0x1080, 0x001C, 0x0028, 0x002C, +0x0038, 0x003C, 0x0040, 0x0044, 0x0048, 0x004C, 0x0050, 0x0054, 0x0058, 0x005C, + +0x0100, 0x0104, 0x0108, 0x010C, 0x0110, 0x014C, 0x0150, 0x0168, 0x0194, 0x0198, 0x01C4, + +0x0700, 0x0704,0x0708, 0x070C, 0x0710, 0x0714, 0x0718, 0x071C, 0x0720, + +0x1000, 0x1004, 0x1008, 0x100C, 0x1010, 0x1014, 0x1018, 0x101C, 0x1020, 0x1048, 0x104C, +0x1050, 0x1054}; + + +/*! + \brief deinitialize the ENET, and reset structure parameters for ENET initialization + \param[in] none + \param[out] none + \retval none +*/ +void enet_deinit(void) +{ + rcu_periph_reset_enable(RCU_ENETRST); + rcu_periph_reset_disable(RCU_ENETRST); + enet_initpara_reset(); +} + +/*! + \brief configure the parameters which are usually less cared for initialization + note -- this function must be called before enet_init(), otherwise + configuration will be no effect + \param[in] option: different function option, which is related to several parameters, + only one parameter can be selected which is shown as below, refer to enet_option_enum + \arg FORWARD_OPTION: choose to configure the frame forward related parameters + \arg DMABUS_OPTION: choose to configure the DMA bus mode related parameters + \arg DMA_MAXBURST_OPTION: choose to configure the DMA max burst related parameters + \arg DMA_ARBITRATION_OPTION: choose to configure the DMA arbitration related parameters + \arg STORE_OPTION: choose to configure the store forward mode related parameters + \arg DMA_OPTION: choose to configure the DMA descriptor related parameters + \arg VLAN_OPTION: choose to configure vlan related parameters + \arg FLOWCTL_OPTION: choose to configure flow control related parameters + \arg HASHH_OPTION: choose to configure hash high + \arg HASHL_OPTION: choose to configure hash low + \arg FILTER_OPTION: choose to configure frame filter related parameters + \arg HALFDUPLEX_OPTION: choose to configure halfduplex mode related parameters + \arg TIMER_OPTION: choose to configure time counter related parameters + \arg INTERFRAMEGAP_OPTION: choose to configure the inter frame gap related parameters + \param[in] para: the related parameters according to the option + all the related parameters should be configured which are shown as below + FORWARD_OPTION related parameters: + - ENET_AUTO_PADCRC_DROP_ENABLE/ ENET_AUTO_PADCRC_DROP_DISABLE ; + - ENET_FORWARD_ERRFRAMES_ENABLE/ ENET_FORWARD_ERRFRAMES_DISABLE ; + - ENET_FORWARD_UNDERSZ_GOODFRAMES_ENABLE/ ENET_FORWARD_UNDERSZ_GOODFRAMES_DISABLE . + DMABUS_OPTION related parameters: + - ENET_ADDRESS_ALIGN_ENABLE/ ENET_ADDRESS_ALIGN_DISABLE ; + - ENET_FIXED_BURST_ENABLE/ ENET_FIXED_BURST_DISABLE ; + DMA_MAXBURST_OPTION related parameters: + - ENET_RXDP_1BEAT/ ENET_RXDP_2BEAT/ ENET_RXDP_4BEAT/ + ENET_RXDP_8BEAT/ ENET_RXDP_16BEAT/ ENET_RXDP_32BEAT/ + ENET_RXDP_4xPGBL_4BEAT/ ENET_RXDP_4xPGBL_8BEAT/ + ENET_RXDP_4xPGBL_16BEAT/ ENET_RXDP_4xPGBL_32BEAT/ + ENET_RXDP_4xPGBL_64BEAT/ ENET_RXDP_4xPGBL_128BEAT ; + - ENET_PGBL_1BEAT/ ENET_PGBL_2BEAT/ ENET_PGBL_4BEAT/ + ENET_PGBL_8BEAT/ ENET_PGBL_16BEAT/ ENET_PGBL_32BEAT/ + ENET_PGBL_4xPGBL_4BEAT/ ENET_PGBL_4xPGBL_8BEAT/ + ENET_PGBL_4xPGBL_16BEAT/ ENET_PGBL_4xPGBL_32BEAT/ + ENET_PGBL_4xPGBL_64BEAT/ ENET_PGBL_4xPGBL_128BEAT ; + - ENET_RXTX_DIFFERENT_PGBL/ ENET_RXTX_SAME_PGBL ; + DMA_ARBITRATION_OPTION related parameters: + - ENET_ARBITRATION_RXPRIORTX / ENET_ARBITRATION_RXTX_1_1 + / ENET_ARBITRATION_RXTX_2_1/ ENET_ARBITRATION_RXTX_3_1 + / ENET_ARBITRATION_RXTX_4_1. + STORE_OPTION related parameters: + - ENET_RX_MODE_STOREFORWARD/ ENET_RX_MODE_CUTTHROUGH ; + - ENET_TX_MODE_STOREFORWARD/ ENET_TX_MODE_CUTTHROUGH ; + - ENET_RX_THRESHOLD_64BYTES/ ENET_RX_THRESHOLD_32BYTES/ + ENET_RX_THRESHOLD_96BYTES/ ENET_RX_THRESHOLD_128BYTES ; + - ENET_TX_THRESHOLD_64BYTES/ ENET_TX_THRESHOLD_128BYTES/ + ENET_TX_THRESHOLD_192BYTES/ ENET_TX_THRESHOLD_256BYTES/ + ENET_TX_THRESHOLD_40BYTES/ ENET_TX_THRESHOLD_32BYTES/ + ENET_TX_THRESHOLD_24BYTES/ ENET_TX_THRESHOLD_16BYTES . + DMA_OPTION related parameters: + - ENET_FLUSH_RXFRAME_ENABLE/ ENET_FLUSH_RXFRAME_DISABLE ; + - ENET_SECONDFRAME_OPT_ENABLE/ ENET_SECONDFRAME_OPT_DISABLE . + VLAN_OPTION related parameters: + - ENET_VLANTAGCOMPARISON_12BIT/ ENET_VLANTAGCOMPARISON_16BIT ; + - MAC_VLT_VLTI(regval) . + FLOWCTL_OPTION related parameters: + - MAC_FCTL_PTM(regval) ; + - ENET_ZERO_QUANTA_PAUSE_ENABLE/ ENET_ZERO_QUANTA_PAUSE_DISABLE ; + - ENET_PAUSETIME_MINUS4/ ENET_PAUSETIME_MINUS28/ + ENET_PAUSETIME_MINUS144/ENET_PAUSETIME_MINUS256 ; + - ENET_MAC0_AND_UNIQUE_ADDRESS_PAUSEDETECT/ ENET_UNIQUE_PAUSEDETECT ; + - ENET_RX_FLOWCONTROL_ENABLE/ ENET_RX_FLOWCONTROL_DISABLE ; + - ENET_TX_FLOWCONTROL_ENABLE/ ENET_TX_FLOWCONTROL_DISABLE . + HASHH_OPTION related parameters: + - 0x0~0xFFFF FFFFU + HASHL_OPTION related parameters: + - 0x0~0xFFFF FFFFU + FILTER_OPTION related parameters: + - ENET_SRC_FILTER_NORMAL_ENABLE/ ENET_SRC_FILTER_INVERSE_ENABLE/ + ENET_SRC_FILTER_DISABLE ; + - ENET_DEST_FILTER_INVERSE_ENABLE/ ENET_DEST_FILTER_INVERSE_DISABLE ; + - ENET_MULTICAST_FILTER_HASH_OR_PERFECT/ ENET_MULTICAST_FILTER_HASH/ + ENET_MULTICAST_FILTER_PERFECT/ ENET_MULTICAST_FILTER_NONE ; + - ENET_UNICAST_FILTER_EITHER/ ENET_UNICAST_FILTER_HASH/ + ENET_UNICAST_FILTER_PERFECT ; + - ENET_PCFRM_PREVENT_ALL/ ENET_PCFRM_PREVENT_PAUSEFRAME/ + ENET_PCFRM_FORWARD_ALL/ ENET_PCFRM_FORWARD_FILTERED . + HALFDUPLEX_OPTION related parameters: + - ENET_CARRIERSENSE_ENABLE/ ENET_CARRIERSENSE_DISABLE ; + - ENET_RECEIVEOWN_ENABLE/ ENET_RECEIVEOWN_DISABLE ; + - ENET_RETRYTRANSMISSION_ENABLE/ ENET_RETRYTRANSMISSION_DISABLE ; + - ENET_BACKOFFLIMIT_10/ ENET_BACKOFFLIMIT_8/ + ENET_BACKOFFLIMIT_4/ ENET_BACKOFFLIMIT_1 ; + - ENET_DEFERRALCHECK_ENABLE/ ENET_DEFERRALCHECK_DISABLE . + TIMER_OPTION related parameters: + - ENET_WATCHDOG_ENABLE/ ENET_WATCHDOG_DISABLE ; + - ENET_JABBER_ENABLE/ ENET_JABBER_DISABLE ; + INTERFRAMEGAP_OPTION related parameters: + - ENET_INTERFRAMEGAP_96BIT/ ENET_INTERFRAMEGAP_88BIT/ + ENET_INTERFRAMEGAP_80BIT/ ENET_INTERFRAMEGAP_72BIT/ + ENET_INTERFRAMEGAP_64BIT/ ENET_INTERFRAMEGAP_56BIT/ + ENET_INTERFRAMEGAP_48BIT/ ENET_INTERFRAMEGAP_40BIT . + \param[out] none + \retval none +*/ +void enet_initpara_config(enet_option_enum option, uint32_t para) +{ + switch(option){ + case FORWARD_OPTION: + /* choose to configure forward_frame, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)FORWARD_OPTION; + enet_initpara.forward_frame = para; + break; + case DMABUS_OPTION: + /* choose to configure dmabus_mode, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)DMABUS_OPTION; + enet_initpara.dmabus_mode = para; + break; + case DMA_MAXBURST_OPTION: + /* choose to configure dma_maxburst, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)DMA_MAXBURST_OPTION; + enet_initpara.dma_maxburst = para; + break; + case DMA_ARBITRATION_OPTION: + /* choose to configure dma_arbitration, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)DMA_ARBITRATION_OPTION; + enet_initpara.dma_arbitration = para; + break; + case STORE_OPTION: + /* choose to configure store_forward_mode, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)STORE_OPTION; + enet_initpara.store_forward_mode = para; + break; + case DMA_OPTION: + /* choose to configure dma_function, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)DMA_OPTION; + enet_initpara.dma_function = para; + break; + case VLAN_OPTION: + /* choose to configure vlan_config, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)VLAN_OPTION; + enet_initpara.vlan_config = para; + break; + case FLOWCTL_OPTION: + /* choose to configure flow_control, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)FLOWCTL_OPTION; + enet_initpara.flow_control = para; + break; + case HASHH_OPTION: + /* choose to configure hashtable_high, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)HASHH_OPTION; + enet_initpara.hashtable_high = para; + break; + case HASHL_OPTION: + /* choose to configure hashtable_low, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)HASHL_OPTION; + enet_initpara.hashtable_low = para; + break; + case FILTER_OPTION: + /* choose to configure framesfilter_mode, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)FILTER_OPTION; + enet_initpara.framesfilter_mode = para; + break; + case HALFDUPLEX_OPTION: + /* choose to configure halfduplex_param, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)HALFDUPLEX_OPTION; + enet_initpara.halfduplex_param = para; + break; + case TIMER_OPTION: + /* choose to configure timer_config, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)TIMER_OPTION; + enet_initpara.timer_config = para; + break; + case INTERFRAMEGAP_OPTION: + /* choose to configure interframegap, and save the configuration parameters */ + enet_initpara.option_enable |= (uint32_t)INTERFRAMEGAP_OPTION; + enet_initpara.interframegap = para; + break; + default: + break; + } +} + +/*! + \brief initialize ENET peripheral with generally concerned parameters and the less cared + parameters + \param[in] mediamode: PHY mode and mac loopback configurations, only one parameter can be selected + which is shown as below, refer to enet_mediamode_enum + \arg ENET_AUTO_NEGOTIATION: PHY auto negotiation + \arg ENET_100M_FULLDUPLEX: 100Mbit/s, full-duplex + \arg ENET_100M_HALFDUPLEX: 100Mbit/s, half-duplex + \arg ENET_10M_FULLDUPLEX: 10Mbit/s, full-duplex + \arg ENET_10M_HALFDUPLEX: 10Mbit/s, half-duplex + \arg ENET_LOOPBACKMODE: MAC in loopback mode at the MII + \param[in] checksum: IP frame checksum offload function, only one parameter can be selected + which is shown as below, refer to enet_mediamode_enum + \arg ENET_NO_AUTOCHECKSUM: disable IP frame checksum function + \arg ENET_AUTOCHECKSUM_DROP_FAILFRAMES: enable IP frame checksum function + \arg ENET_AUTOCHECKSUM_ACCEPT_FAILFRAMES: enable IP frame checksum function, and the received frame + with only payload error but no other errors will not be dropped + \param[in] recept: frame filter function, only one parameter can be selected + which is shown as below, refer to enet_frmrecept_enum + \arg ENET_PROMISCUOUS_MODE: promiscuous mode enabled + \arg ENET_RECEIVEALL: all received frame are forwarded to application + \arg ENET_BROADCAST_FRAMES_PASS: the address filters pass all received broadcast frames + \arg ENET_BROADCAST_FRAMES_DROP: the address filters filter all incoming broadcast frames + \param[out] none + \retval ErrStatus: ERROR or SUCCESS +*/ +ErrStatus enet_init(enet_mediamode_enum mediamode, enet_chksumconf_enum checksum, enet_frmrecept_enum recept) +{ + uint32_t reg_value=0U, reg_temp = 0U, temp = 0U; + uint32_t media_temp = 0U; + uint32_t timeout = 0U; + uint16_t phy_value = 0U; + ErrStatus phy_state= ERROR, enet_state = ERROR; + + /* PHY interface configuration, configure SMI clock and reset PHY chip */ + if(ERROR == enet_phy_config()){ + _ENET_DELAY_(PHY_RESETDELAY); + if(ERROR == enet_phy_config()){ + return enet_state; + } + } + /* initialize ENET peripheral with generally concerned parameters */ + enet_default_init(); + + /* 1st, configure mediamode */ + media_temp = (uint32_t)mediamode; + /* if is PHY auto negotiation */ + if((uint32_t)ENET_AUTO_NEGOTIATION == media_temp){ + /* wait for PHY_LINKED_STATUS bit be set */ + do{ + enet_phy_write_read(ENET_PHY_READ, PHY_ADDRESS, PHY_REG_BSR, &phy_value); + phy_value &= PHY_LINKED_STATUS; + timeout++; + }while((RESET == phy_value) && (timeout < PHY_READ_TO)); + /* return ERROR due to timeout */ + if(PHY_READ_TO == timeout){ + return enet_state; + } + /* reset timeout counter */ + timeout = 0U; + + /* enable auto-negotiation */ + phy_value = PHY_AUTONEGOTIATION; + phy_state = enet_phy_write_read(ENET_PHY_WRITE, PHY_ADDRESS, PHY_REG_BCR, &phy_value); + if(!phy_state){ + /* return ERROR due to write timeout */ + return enet_state; + } + + /* wait for the PHY_AUTONEGO_COMPLETE bit be set */ + do{ + enet_phy_write_read(ENET_PHY_READ, PHY_ADDRESS, PHY_REG_BSR, &phy_value); + phy_value &= PHY_AUTONEGO_COMPLETE; + timeout++; + }while((RESET == phy_value) && (timeout < (uint32_t)PHY_READ_TO)); + /* return ERROR due to timeout */ + if(PHY_READ_TO == timeout){ + return enet_state; + } + /* reset timeout counter */ + timeout = 0U; + + /* read the result of the auto-negotiation */ + enet_phy_write_read(ENET_PHY_READ, PHY_ADDRESS, PHY_SR, &phy_value); + /* configure the duplex mode of MAC following the auto-negotiation result */ + if((uint16_t)RESET != (phy_value & PHY_DUPLEX_STATUS)){ + media_temp = ENET_MODE_FULLDUPLEX; + }else{ + media_temp = ENET_MODE_HALFDUPLEX; + } + /* configure the communication speed of MAC following the auto-negotiation result */ + if((uint16_t)RESET !=(phy_value & PHY_SPEED_STATUS)){ + media_temp |= ENET_SPEEDMODE_10M; + }else{ + media_temp |= ENET_SPEEDMODE_100M; + } + }else{ + phy_value = (uint16_t)((media_temp & ENET_MAC_CFG_DPM) >> 3); + phy_value |= (uint16_t)((media_temp & ENET_MAC_CFG_SPD) >> 1); + phy_state = enet_phy_write_read(ENET_PHY_WRITE, PHY_ADDRESS, PHY_REG_BCR, &phy_value); + if(!phy_state){ + /* return ERROR due to write timeout */ + return enet_state; + } + /* PHY configuration need some time */ + _ENET_DELAY_(PHY_CONFIGDELAY); + } + /* after configuring the PHY, use mediamode to configure registers */ + reg_value = ENET_MAC_CFG; + /* configure ENET_MAC_CFG register */ + reg_value &= (~(ENET_MAC_CFG_SPD |ENET_MAC_CFG_DPM |ENET_MAC_CFG_LBM)); + reg_value |= media_temp; + ENET_MAC_CFG = reg_value; + + + /* 2st, configure checksum */ + if(RESET != ((uint32_t)checksum & ENET_CHECKSUMOFFLOAD_ENABLE)){ + ENET_MAC_CFG |= ENET_CHECKSUMOFFLOAD_ENABLE; + + reg_value = ENET_DMA_CTL; + /* configure ENET_DMA_CTL register */ + reg_value &= ~ENET_DMA_CTL_DTCERFD; + reg_value |= ((uint32_t)checksum & ENET_DMA_CTL_DTCERFD); + ENET_DMA_CTL = reg_value; + } + + /* 3rd, configure recept */ + ENET_MAC_FRMF |= (uint32_t)recept; + + /* 4th, configure different function options */ + /* configure forward_frame related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)FORWARD_OPTION)){ + reg_temp = enet_initpara.forward_frame; + + reg_value = ENET_MAC_CFG; + temp = reg_temp; + /* configure ENET_MAC_CFG register */ + reg_value &= (~ENET_MAC_CFG_APCD); + temp &= ENET_MAC_CFG_APCD; + reg_value |= temp; + ENET_MAC_CFG = reg_value; + + reg_value = ENET_DMA_CTL; + temp = reg_temp; + /* configure ENET_DMA_CTL register */ + reg_value &= (~(ENET_DMA_CTL_FERF |ENET_DMA_CTL_FUF)); + temp &= ((ENET_DMA_CTL_FERF | ENET_DMA_CTL_FUF)<<2); + reg_value |= (temp >> 2); + ENET_DMA_CTL = reg_value; + } + + /* configure dmabus_mode related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)DMABUS_OPTION)){ + temp = enet_initpara.dmabus_mode; + + reg_value = ENET_DMA_BCTL; + /* configure ENET_DMA_BCTL register */ + reg_value &= ~(ENET_DMA_BCTL_AA | ENET_DMA_BCTL_FB \ + |ENET_DMA_BCTL_FPBL); + reg_value |= temp; + ENET_DMA_BCTL = reg_value; + } + + /* configure dma_maxburst related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)DMA_MAXBURST_OPTION)){ + temp = enet_initpara.dma_maxburst; + + reg_value = ENET_DMA_BCTL; + /* configure ENET_DMA_BCTL register */ + reg_value &= ~(ENET_DMA_BCTL_RXDP| ENET_DMA_BCTL_PGBL | ENET_DMA_BCTL_UIP); + reg_value |= temp; + ENET_DMA_BCTL = reg_value; + } + + /* configure dma_arbitration related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)DMA_ARBITRATION_OPTION)){ + temp = enet_initpara.dma_arbitration; + + reg_value = ENET_DMA_BCTL; + /* configure ENET_DMA_BCTL register */ + reg_value &= ~(ENET_DMA_BCTL_RTPR | ENET_DMA_BCTL_DAB); + reg_value |= temp; + ENET_DMA_BCTL = reg_value; + } + + /* configure store_forward_mode related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)STORE_OPTION)){ + temp = enet_initpara.store_forward_mode; + + reg_value = ENET_DMA_CTL; + /* configure ENET_DMA_CTL register */ + reg_value &= ~(ENET_DMA_CTL_RSFD | ENET_DMA_CTL_TSFD| ENET_DMA_CTL_RTHC| ENET_DMA_CTL_TTHC); + reg_value |= temp; + ENET_DMA_CTL = reg_value; + } + + /* configure dma_function related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)DMA_OPTION)){ + reg_temp = enet_initpara.dma_function; + + reg_value = ENET_DMA_CTL; + /* configure ENET_DMA_CTL register */ + reg_value &= (~(ENET_DMA_CTL_DAFRF |ENET_DMA_CTL_OSF)); + reg_value |= reg_temp; + ENET_DMA_CTL = reg_value; + } + + /* configure vlan_config related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)VLAN_OPTION)){ + reg_temp = enet_initpara.vlan_config; + + reg_value = ENET_MAC_VLT; + /* configure ENET_MAC_VLT register */ + reg_value &= ~(ENET_MAC_VLT_VLTI | ENET_MAC_VLT_VLTC); + reg_value |= reg_temp; + ENET_MAC_VLT = reg_value; + } + + /* configure flow_control related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)FLOWCTL_OPTION)){ + reg_temp = enet_initpara.flow_control; + + reg_value = ENET_MAC_FCTL; + temp = reg_temp; + /* configure ENET_MAC_FCTL register */ + reg_value &= ~(ENET_MAC_FCTL_PTM |ENET_MAC_FCTL_DZQP |ENET_MAC_FCTL_PLTS \ + | ENET_MAC_FCTL_UPFDT |ENET_MAC_FCTL_RFCEN |ENET_MAC_FCTL_TFCEN); + temp &= (ENET_MAC_FCTL_PTM |ENET_MAC_FCTL_DZQP |ENET_MAC_FCTL_PLTS \ + | ENET_MAC_FCTL_UPFDT |ENET_MAC_FCTL_RFCEN |ENET_MAC_FCTL_TFCEN); + reg_value |= temp; + ENET_MAC_FCTL = reg_value; + + reg_value = ENET_MAC_FCTH; + temp = reg_temp; + /* configure ENET_MAC_FCTH register */ + reg_value &= ~(ENET_MAC_FCTH_RFA |ENET_MAC_FCTH_RFD); + temp &= ((ENET_MAC_FCTH_RFA | ENET_MAC_FCTH_RFD )<<8); + reg_value |= (temp >> 8); + ENET_MAC_FCTH = reg_value; + } + + /* configure hashtable_high related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)HASHH_OPTION)){ + ENET_MAC_HLH = enet_initpara.hashtable_high; + } + + /* configure hashtable_low related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)HASHL_OPTION)){ + ENET_MAC_HLL = enet_initpara.hashtable_low; + } + + /* configure framesfilter_mode related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)FILTER_OPTION)){ + reg_temp = enet_initpara.framesfilter_mode; + + reg_value = ENET_MAC_FRMF; + /* configure ENET_MAC_FRMF register */ + reg_value &= ~(ENET_MAC_FRMF_SAFLT | ENET_MAC_FRMF_SAIFLT | ENET_MAC_FRMF_DAIFLT \ + | ENET_MAC_FRMF_HMF | ENET_MAC_FRMF_HPFLT | ENET_MAC_FRMF_MFD \ + | ENET_MAC_FRMF_HUF | ENET_MAC_FRMF_PCFRM); + reg_value |= reg_temp; + ENET_MAC_FRMF = reg_value; + } + + /* configure halfduplex_param related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)HALFDUPLEX_OPTION)){ + reg_temp = enet_initpara.halfduplex_param; + + reg_value = ENET_MAC_CFG; + /* configure ENET_MAC_CFG register */ + reg_value &= ~(ENET_MAC_CFG_CSD | ENET_MAC_CFG_ROD | ENET_MAC_CFG_RTD \ + | ENET_MAC_CFG_BOL | ENET_MAC_CFG_DFC); + reg_value |= reg_temp; + ENET_MAC_CFG = reg_value; + } + + /* configure timer_config related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)TIMER_OPTION)){ + reg_temp = enet_initpara.timer_config; + + reg_value = ENET_MAC_CFG; + /* configure ENET_MAC_CFG register */ + reg_value &= ~(ENET_MAC_CFG_WDD | ENET_MAC_CFG_JBD); + reg_value |= reg_temp; + ENET_MAC_CFG = reg_value; + } + + /* configure interframegap related registers */ + if(RESET != (enet_initpara.option_enable & (uint32_t)INTERFRAMEGAP_OPTION)){ + reg_temp = enet_initpara.interframegap; + + reg_value = ENET_MAC_CFG; + /* configure ENET_MAC_CFG register */ + reg_value &= ~ENET_MAC_CFG_IGBS; + reg_value |= reg_temp; + ENET_MAC_CFG = reg_value; + } + + enet_state = SUCCESS; + return enet_state; +} + +/*! + \brief reset all core internal registers located in CLK_TX and CLK_RX + \param[in] none + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus enet_software_reset(void) +{ + uint32_t timeout = 0U; + ErrStatus enet_state = ERROR; + uint32_t dma_flag; + + /* reset all core internal registers located in CLK_TX and CLK_RX */ + ENET_DMA_BCTL |= ENET_DMA_BCTL_SWR; + + /* wait for reset operation complete */ + do{ + dma_flag = (ENET_DMA_BCTL & ENET_DMA_BCTL_SWR); + timeout++; + }while((RESET != dma_flag) && (ENET_DELAY_TO != timeout)); + + /* reset operation complete */ + if(RESET == (ENET_DMA_BCTL & ENET_DMA_BCTL_SWR)){ + enet_state = SUCCESS; + } + + return enet_state; +} + +/*! + \brief check receive frame valid and return frame size + \param[in] none + \param[out] none + \retval size of received frame: 0x0 - 0x3FFF +*/ +uint32_t enet_rxframe_size_get(void) +{ + uint32_t size = 0U; + uint32_t status; + + /* get rdes0 information of current RxDMA descriptor */ + status = dma_current_rxdesc->status; + + /* if the desciptor is owned by DMA */ + if((uint32_t)RESET != (status & ENET_RDES0_DAV)){ + return 0U; + } + + /* if has any error, or the frame uses two or more descriptors */ + if((((uint32_t)RESET) != (status & ENET_RDES0_ERRS)) || + (((uint32_t)RESET) == (status & ENET_RDES0_LDES)) || + (((uint32_t)RESET) == (status & ENET_RDES0_FDES))){ + /* drop current receive frame */ + enet_rxframe_drop(); + + return 1U; + } + + /* if is an ethernet-type frame, and IP frame payload error occurred */ + if((((uint32_t)RESET) != (status & ENET_RDES0_FRMT)) && + (((uint32_t)RESET) != (status & ENET_RDES0_PCERR))){ + /* drop current receive frame */ + enet_rxframe_drop(); + + return 1U; + } + + /* if CPU owns current descriptor, no error occured, the frame uses only one descriptor */ + if((((uint32_t)RESET) == (status & ENET_RDES0_DAV)) && + (((uint32_t)RESET) == (status & ENET_RDES0_ERRS)) && + (((uint32_t)RESET) != (status & ENET_RDES0_LDES)) && + (((uint32_t)RESET) != (status & ENET_RDES0_FDES))){ + /* get the size of the received data including CRC */ + size = GET_RDES0_FRML(status); + /* substract the CRC size */ + size = size - 4U; + }else{ + enet_unknow_err++; + enet_rxframe_drop(); + + return 1U; + } + + /* return packet size */ + return size; +} + +/*! + \brief initialize the DMA Tx/Rx descriptors's parameters in chain mode + \param[in] direction: the descriptors which users want to init, refer to enet_dmadirection_enum, + only one parameter can be selected which is shown as below + \arg ENET_DMA_TX: DMA Tx descriptors + \arg ENET_DMA_RX: DMA Rx descriptors + \param[out] none + \retval none +*/ +void enet_descriptors_chain_init(enet_dmadirection_enum direction) +{ + uint32_t num = 0U, count = 0U, maxsize = 0U; + uint32_t desc_status = 0U, desc_bufsize = 0U; + enet_descriptors_struct *desc, *desc_tab; + uint8_t *buf; + + /* if want to initialize DMA Tx descriptors */ + if (ENET_DMA_TX == direction){ + /* save a copy of the DMA Tx descriptors */ + desc_tab = txdesc_tab; + buf = &tx_buff[0][0]; + count = ENET_TXBUF_NUM; + maxsize = ENET_TXBUF_SIZE; + + /* select chain mode */ + desc_status = ENET_TDES0_TCHM; + + /* configure DMA Tx descriptor table address register */ + ENET_DMA_TDTADDR = (uint32_t)desc_tab; + dma_current_txdesc = desc_tab; + }else{ + /* if want to initialize DMA Rx descriptors */ + /* save a copy of the DMA Rx descriptors */ + desc_tab = rxdesc_tab; + buf = &rx_buff[0][0]; + count = ENET_RXBUF_NUM; + maxsize = ENET_RXBUF_SIZE; + + /* enable receiving */ + desc_status = ENET_RDES0_DAV; + /* select receive chained mode and set buffer1 size */ + desc_bufsize = ENET_RDES1_RCHM | (uint32_t)ENET_RXBUF_SIZE; + + /* configure DMA Rx descriptor table address register */ + ENET_DMA_RDTADDR = (uint32_t)desc_tab; + dma_current_rxdesc = desc_tab; + } + dma_current_ptp_rxdesc = NULL; + dma_current_ptp_txdesc = NULL; + + /* configure each descriptor */ + for(num=0U; num < count; num++){ + /* get the pointer to the next descriptor of the descriptor table */ + desc = desc_tab + num; + + /* configure descriptors */ + desc->status = desc_status; + desc->control_buffer_size = desc_bufsize; + desc->buffer1_addr = (uint32_t)(&buf[num * maxsize]); + + /* if is not the last descriptor */ + if(num < (count - 1U)){ + /* configure the next descriptor address */ + desc->buffer2_next_desc_addr = (uint32_t)(desc_tab + num + 1U); + }else{ + /* when it is the last descriptor, the next descriptor address + equals to first descriptor address in descriptor table */ + desc->buffer2_next_desc_addr = (uint32_t) desc_tab; + } + } +} + +/*! + \brief initialize the DMA Tx/Rx descriptors's parameters in ring mode + \param[in] direction: the descriptors which users want to init, refer to enet_dmadirection_enum, + only one parameter can be selected which is shown as below + \arg ENET_DMA_TX: DMA Tx descriptors + \arg ENET_DMA_RX: DMA Rx descriptors + \param[out] none + \retval none +*/ +void enet_descriptors_ring_init(enet_dmadirection_enum direction) +{ + uint32_t num = 0U, count = 0U, maxsize = 0U; + uint32_t desc_status = 0U, desc_bufsize = 0U; + enet_descriptors_struct *desc; + enet_descriptors_struct *desc_tab; + uint8_t *buf; + + /* configure descriptor skip length */ + ENET_DMA_BCTL &= ~ENET_DMA_BCTL_DPSL; + ENET_DMA_BCTL |= DMA_BCTL_DPSL(0); + + /* if want to initialize DMA Tx descriptors */ + if (ENET_DMA_TX == direction){ + /* save a copy of the DMA Tx descriptors */ + desc_tab = txdesc_tab; + buf = &tx_buff[0][0]; + count = ENET_TXBUF_NUM; + maxsize = ENET_TXBUF_SIZE; + + /* configure DMA Tx descriptor table address register */ + ENET_DMA_TDTADDR = (uint32_t)desc_tab; + dma_current_txdesc = desc_tab; + }else{ + /* if want to initialize DMA Rx descriptors */ + /* save a copy of the DMA Rx descriptors */ + desc_tab = rxdesc_tab; + buf = &rx_buff[0][0]; + count = ENET_RXBUF_NUM; + maxsize = ENET_RXBUF_SIZE; + + /* enable receiving */ + desc_status = ENET_RDES0_DAV; + /* set buffer1 size */ + desc_bufsize = ENET_RXBUF_SIZE; + + /* configure DMA Rx descriptor table address register */ + ENET_DMA_RDTADDR = (uint32_t)desc_tab; + dma_current_rxdesc = desc_tab; + } + dma_current_ptp_rxdesc = NULL; + dma_current_ptp_txdesc = NULL; + + /* configure each descriptor */ + for(num=0U; num < count; num++){ + /* get the pointer to the next descriptor of the descriptor table */ + desc = desc_tab + num; + + /* configure descriptors */ + desc->status = desc_status; + desc->control_buffer_size = desc_bufsize; + desc->buffer1_addr = (uint32_t)(&buf[num * maxsize]); + + /* when it is the last descriptor */ + if(num == (count - 1U)){ + if (ENET_DMA_TX == direction){ + /* configure transmit end of ring mode */ + desc->status |= ENET_TDES0_TERM; + }else{ + /* configure receive end of ring mode */ + desc->control_buffer_size |= ENET_RDES1_RERM; + } + } + } +} + +/*! + \brief handle current received frame data to application buffer + \param[in] bufsize: the size of buffer which is the parameter in function + \param[out] buffer: pointer to the received frame data + note -- if the input is NULL, user should copy data in application by himself + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus enet_frame_receive(uint8_t *buffer, uint32_t bufsize) +{ + uint32_t offset = 0U, size = 0U; + + /* the descriptor is busy due to own by the DMA */ + if((uint32_t)RESET != (dma_current_rxdesc->status & ENET_RDES0_DAV)){ + return ERROR; + } + + + /* if buffer pointer is null, indicates that users has copied data in application */ + if(NULL != buffer){ + /* if no error occurs, and the frame uses only one descriptor */ + if((((uint32_t)RESET) == (dma_current_rxdesc->status & ENET_RDES0_ERRS)) && + (((uint32_t)RESET) != (dma_current_rxdesc->status & ENET_RDES0_LDES)) && + (((uint32_t)RESET) != (dma_current_rxdesc->status & ENET_RDES0_FDES))){ + /* get the frame length except CRC */ + size = GET_RDES0_FRML(dma_current_rxdesc->status); + size = size - 4U; + + /* to avoid situation that the frame size exceeds the buffer length */ + if(size > bufsize){ + return ERROR; + } + + /* copy data from Rx buffer to application buffer */ + for(offset = 0U; offsetbuffer1_addr) + offset)); + } + + }else{ + /* return ERROR */ + return ERROR; + } + } + /* enable reception, descriptor is owned by DMA */ + dma_current_rxdesc->status = ENET_RDES0_DAV; + + /* check Rx buffer unavailable flag status */ + if ((uint32_t)RESET != (ENET_DMA_STAT & ENET_DMA_STAT_RBU)){ + /* clear RBU flag */ + ENET_DMA_STAT = ENET_DMA_STAT_RBU; + /* resume DMA reception by writing to the RPEN register*/ + ENET_DMA_RPEN = 0U; + } + + /* update the current RxDMA descriptor pointer to the next decriptor in RxDMA decriptor table */ + /* chained mode */ + if((uint32_t)RESET != (dma_current_rxdesc->control_buffer_size & ENET_RDES1_RCHM)){ + dma_current_rxdesc = (enet_descriptors_struct*) (dma_current_rxdesc->buffer2_next_desc_addr); + }else{ + /* ring mode */ + if((uint32_t)RESET != (dma_current_rxdesc->control_buffer_size & ENET_RDES1_RERM)){ + /* if is the last descriptor in table, the next descriptor is the table header */ + dma_current_rxdesc = (enet_descriptors_struct*) (ENET_DMA_RDTADDR); + }else{ + /* the next descriptor is the current address, add the descriptor size, and descriptor skip length */ + dma_current_rxdesc = (enet_descriptors_struct*) (uint32_t)((uint32_t)dma_current_rxdesc + ETH_DMARXDESC_SIZE + (GET_DMA_BCTL_DPSL(ENET_DMA_BCTL))); + } + } + + return SUCCESS; +} + +/*! + \brief handle application buffer data to transmit it + \param[in] buffer: pointer to the frame data to be transmitted, + note -- if the input is NULL, user should handle the data in application by himself + \param[in] length: the length of frame data to be transmitted + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus enet_frame_transmit(uint8_t *buffer, uint32_t length) +{ + uint32_t offset = 0U; + uint32_t dma_tbu_flag, dma_tu_flag; + + /* the descriptor is busy due to own by the DMA */ + if((uint32_t)RESET != (dma_current_txdesc->status & ENET_TDES0_DAV)){ + return ERROR; + } + + /* only frame length no more than ENET_MAX_FRAME_SIZE is allowed */ + if(length > ENET_MAX_FRAME_SIZE){ + return ERROR; + } + + /* if buffer pointer is null, indicates that users has handled data in application */ + if(NULL != buffer){ + /* copy frame data from application buffer to Tx buffer */ + for(offset = 0U; offset < length; offset++){ + (*(__IO uint8_t *) (uint32_t)((dma_current_txdesc->buffer1_addr) + offset)) = (*(buffer + offset)); + } + } + + /* set the frame length */ + dma_current_txdesc->control_buffer_size = length; + /* set the segment of frame, frame is transmitted in one descriptor */ + dma_current_txdesc->status |= ENET_TDES0_LSG | ENET_TDES0_FSG; + /* enable the DMA transmission */ + dma_current_txdesc->status |= ENET_TDES0_DAV; + + /* check Tx buffer unavailable flag status */ + dma_tbu_flag = (ENET_DMA_STAT & ENET_DMA_STAT_TBU); + dma_tu_flag = (ENET_DMA_STAT & ENET_DMA_STAT_TU); + + if ((RESET != dma_tbu_flag) || (RESET != dma_tu_flag)){ + /* clear TBU and TU flag */ + ENET_DMA_STAT = (dma_tbu_flag | dma_tu_flag); + /* resume DMA transmission by writing to the TPEN register*/ + ENET_DMA_TPEN = 0U; + } + + /* update the current TxDMA descriptor pointer to the next decriptor in TxDMA decriptor table*/ + /* chained mode */ + if((uint32_t)RESET != (dma_current_txdesc->status & ENET_TDES0_TCHM)){ + dma_current_txdesc = (enet_descriptors_struct*) (dma_current_txdesc->buffer2_next_desc_addr); + }else{ + /* ring mode */ + if((uint32_t)RESET != (dma_current_txdesc->status & ENET_TDES0_TERM)){ + /* if is the last descriptor in table, the next descriptor is the table header */ + dma_current_txdesc = (enet_descriptors_struct*) (ENET_DMA_TDTADDR); + }else{ + /* the next descriptor is the current address, add the descriptor size, and descriptor skip length */ + dma_current_txdesc = (enet_descriptors_struct*) (uint32_t)((uint32_t)dma_current_txdesc + ETH_DMATXDESC_SIZE + (GET_DMA_BCTL_DPSL(ENET_DMA_BCTL))); + } + } + + return SUCCESS; +} + +/*! + \brief configure the transmit IP frame checksum offload calculation and insertion + \param[in] desc: the descriptor pointer which users want to configure + \param[in] checksum: IP frame checksum configuration + only one parameter can be selected which is shown as below + \arg ENET_CHECKSUM_DISABLE: checksum insertion disabled + \arg ENET_CHECKSUM_IPV4HEADER: only IP header checksum calculation and insertion are enabled + \arg ENET_CHECKSUM_TCPUDPICMP_SEGMENT: TCP/UDP/ICMP checksum insertion calculated but pseudo-header + \arg ENET_CHECKSUM_TCPUDPICMP_FULL: TCP/UDP/ICMP checksum insertion fully calculated + \param[out] none + \retval none +*/ +void enet_transmit_checksum_config(enet_descriptors_struct *desc, uint32_t checksum) +{ + desc->status &= ~ENET_TDES0_CM; + desc->status |= checksum; +} + +/*! + \brief ENET Tx and Rx function enable (include MAC and DMA module) + \param[in] none + \param[out] none + \retval none +*/ +void enet_enable(void) +{ + enet_tx_enable(); + enet_rx_enable(); +} + +/*! + \brief ENET Tx and Rx function disable (include MAC and DMA module) + \param[in] none + \param[out] none + \retval none +*/ +void enet_disable(void) +{ + enet_tx_disable(); + enet_rx_disable(); +} + +/*! + \brief configure MAC address + \param[in] mac_addr: select which MAC address will be set, + only one parameter can be selected which is shown as below + \arg ENET_MAC_ADDRESS0: set MAC address 0 filter + \arg ENET_MAC_ADDRESS1: set MAC address 1 filter + \arg ENET_MAC_ADDRESS2: set MAC address 2 filter + \arg ENET_MAC_ADDRESS3: set MAC address 3 filter + \param[in] paddr: the buffer pointer which stores the MAC address + (little-ending store, such as MAC address is aa:bb:cc:dd:ee:22, the buffer is {22, ee, dd, cc, bb, aa}) + \param[out] none + \retval none +*/ +void enet_mac_address_set(enet_macaddress_enum mac_addr, uint8_t paddr[]) +{ + REG32(ENET_ADDRH_BASE + (uint32_t)mac_addr) = ENET_SET_MACADDRH(paddr); + REG32(ENET_ADDRL_BASE + (uint32_t)mac_addr) = ENET_SET_MACADDRL(paddr); +} + +/*! + \brief get MAC address + \param[in] mac_addr: select which MAC address will be get, + only one parameter can be selected which is shown as below + \arg ENET_MAC_ADDRESS0: get MAC address 0 filter + \arg ENET_MAC_ADDRESS1: get MAC address 1 filter + \arg ENET_MAC_ADDRESS2: get MAC address 2 filter + \arg ENET_MAC_ADDRESS3: get MAC address 3 filter + \param[out] paddr: the buffer pointer which is stored the MAC address + (little-ending store, such as mac address is aa:bb:cc:dd:ee:22, the buffer is {22, ee, dd, cc, bb, aa}) + \retval none +*/ +void enet_mac_address_get(enet_macaddress_enum mac_addr, uint8_t paddr[]) +{ + paddr[0] = ENET_GET_MACADDR(mac_addr, 0U); + paddr[1] = ENET_GET_MACADDR(mac_addr, 1U); + paddr[2] = ENET_GET_MACADDR(mac_addr, 2U); + paddr[3] = ENET_GET_MACADDR(mac_addr, 3U); + paddr[4] = ENET_GET_MACADDR(mac_addr, 4U); + paddr[5] = ENET_GET_MACADDR(mac_addr, 5U); +} + +/*! + \brief get the ENET MAC/MSC/PTP/DMA status flag + \param[in] enet_flag: ENET status flag, refer to enet_flag_enum, + only one parameter can be selected which is shown as below + \arg ENET_MAC_FLAG_MPKR: magic packet received flag + \arg ENET_MAC_FLAG_WUFR: wakeup frame received flag + \arg ENET_MAC_FLAG_FLOWCONTROL: flow control status flag + \arg ENET_MAC_FLAG_WUM: WUM status flag + \arg ENET_MAC_FLAG_MSC: MSC status flag + \arg ENET_MAC_FLAG_MSCR: MSC receive status flag + \arg ENET_MAC_FLAG_MSCT: MSC transmit status flag + \arg ENET_MAC_FLAG_TMST: time stamp trigger status flag + \arg ENET_PTP_FLAG_TSSCO: timestamp second counter overflow flag + \arg ENET_PTP_FLAG_TTM: target time match flag + \arg ENET_MSC_FLAG_RFCE: received frames CRC error flag + \arg ENET_MSC_FLAG_RFAE: received frames alignment error flag + \arg ENET_MSC_FLAG_RGUF: received good unicast frames flag + \arg ENET_MSC_FLAG_TGFSC: transmitted good frames single collision flag + \arg ENET_MSC_FLAG_TGFMSC: transmitted good frames more single collision flag + \arg ENET_MSC_FLAG_TGF: transmitted good frames flag + \arg ENET_DMA_FLAG_TS: transmit status flag + \arg ENET_DMA_FLAG_TPS: transmit process stopped status flag + \arg ENET_DMA_FLAG_TBU: transmit buffer unavailable status flag + \arg ENET_DMA_FLAG_TJT: transmit jabber timeout status flag + \arg ENET_DMA_FLAG_RO: receive overflow status flag + \arg ENET_DMA_FLAG_TU: transmit underflow status flag + \arg ENET_DMA_FLAG_RS: receive status flag + \arg ENET_DMA_FLAG_RBU: receive buffer unavailable status flag + \arg ENET_DMA_FLAG_RPS: receive process stopped status flag + \arg ENET_DMA_FLAG_RWT: receive watchdog timeout status flag + \arg ENET_DMA_FLAG_ET: early transmit status flag + \arg ENET_DMA_FLAG_FBE: fatal bus error status flag + \arg ENET_DMA_FLAG_ER: early receive status flag + \arg ENET_DMA_FLAG_AI: abnormal interrupt summary flag + \arg ENET_DMA_FLAG_NI: normal interrupt summary flag + \arg ENET_DMA_FLAG_EB_DMA_ERROR: DMA error flag + \arg ENET_DMA_FLAG_EB_TRANSFER_ERROR: transfer error flag + \arg ENET_DMA_FLAG_EB_ACCESS_ERROR: access error flag + \arg ENET_DMA_FLAG_MSC: MSC status flag + \arg ENET_DMA_FLAG_WUM: WUM status flag + \arg ENET_DMA_FLAG_TST: timestamp trigger status flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus enet_flag_get(enet_flag_enum enet_flag) +{ + if(RESET != (ENET_REG_VAL(enet_flag) & BIT(ENET_BIT_POS(enet_flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear the ENET DMA status flag + \param[in] enet_flag: ENET DMA flag clear, refer to enet_flag_clear_enum + only one parameter can be selected which is shown as below + \arg ENET_DMA_FLAG_TS_CLR: transmit status flag clear + \arg ENET_DMA_FLAG_TPS_CLR: transmit process stopped status flag clear + \arg ENET_DMA_FLAG_TBU_CLR: transmit buffer unavailable status flag clear + \arg ENET_DMA_FLAG_TJT_CLR: transmit jabber timeout status flag clear + \arg ENET_DMA_FLAG_RO_CLR: receive overflow status flag clear + \arg ENET_DMA_FLAG_TU_CLR: transmit underflow status flag clear + \arg ENET_DMA_FLAG_RS_CLR: receive status flag clear + \arg ENET_DMA_FLAG_RBU_CLR: receive buffer unavailable status flag clear + \arg ENET_DMA_FLAG_RPS_CLR: receive process stopped status flag clear + \arg ENET_DMA_FLAG_RWT_CLR: receive watchdog timeout status flag clear + \arg ENET_DMA_FLAG_ET_CLR: early transmit status flag clear + \arg ENET_DMA_FLAG_FBE_CLR: fatal bus error status flag clear + \arg ENET_DMA_FLAG_ER_CLR: early receive status flag clear + \arg ENET_DMA_FLAG_AI_CLR: abnormal interrupt summary flag clear + \arg ENET_DMA_FLAG_NI_CLR: normal interrupt summary flag clear + \param[out] none + \retval none +*/ +void enet_flag_clear(enet_flag_clear_enum enet_flag) +{ + /* write 1 to the corresponding bit in ENET_DMA_STAT, to clear it */ + ENET_REG_VAL(enet_flag) = BIT(ENET_BIT_POS(enet_flag)); +} + +/*! + \brief enable ENET MAC/MSC/DMA interrupt + \param[in] enet_int: ENET interrupt, + only one parameter can be selected which is shown as below + \arg ENET_MAC_INT_WUMIM: WUM interrupt mask + \arg ENET_MAC_INT_TMSTIM: timestamp trigger interrupt mask + \arg ENET_MSC_INT_RFCEIM: received frame CRC error interrupt mask + \arg ENET_MSC_INT_RFAEIM: received frames alignment error interrupt mask + \arg ENET_MSC_INT_RGUFIM: received good unicast frames interrupt mask + \arg ENET_MSC_INT_TGFSCIM: transmitted good frames single collision interrupt mask + \arg ENET_MSC_INT_TGFMSCIM: transmitted good frames more single collision interrupt mask + \arg ENET_MSC_INT_TGFIM: transmitted good frames interrupt mask + \arg ENET_DMA_INT_TIE: transmit interrupt enable + \arg ENET_DMA_INT_TPSIE: transmit process stopped interrupt enable + \arg ENET_DMA_INT_TBUIE: transmit buffer unavailable interrupt enable + \arg ENET_DMA_INT_TJTIE: transmit jabber timeout interrupt enable + \arg ENET_DMA_INT_ROIE: receive overflow interrupt enable + \arg ENET_DMA_INT_TUIE: transmit underflow interrupt enable + \arg ENET_DMA_INT_RIE: receive interrupt enable + \arg ENET_DMA_INT_RBUIE: receive buffer unavailable interrupt enable + \arg ENET_DMA_INT_RPSIE: receive process stopped interrupt enable + \arg ENET_DMA_INT_RWTIE: receive watchdog timeout interrupt enable + \arg ENET_DMA_INT_ETIE: early transmit interrupt enable + \arg ENET_DMA_INT_FBEIE: fatal bus error interrupt enable + \arg ENET_DMA_INT_ERIE: early receive interrupt enable + \arg ENET_DMA_INT_AIE: abnormal interrupt summary enable + \arg ENET_DMA_INT_NIE: normal interrupt summary enable + \param[out] none + \retval none +*/ +void enet_interrupt_enable(enet_int_enum enet_int) +{ + if(DMA_INTEN_REG_OFFSET == ((uint32_t)enet_int >> 6)){ + /* ENET_DMA_INTEN register interrupt */ + ENET_REG_VAL(enet_int) |= BIT(ENET_BIT_POS(enet_int)); + }else{ + /* other INTMSK register interrupt */ + ENET_REG_VAL(enet_int) &= ~BIT(ENET_BIT_POS(enet_int)); + } +} + +/*! + \brief disable ENET MAC/MSC/DMA interrupt + \param[in] enet_int: ENET interrupt, + only one parameter can be selected which is shown as below + \arg ENET_MAC_INT_WUMIM: WUM interrupt mask + \arg ENET_MAC_INT_TMSTIM: timestamp trigger interrupt mask + \arg ENET_MSC_INT_RFCEIM: received frame CRC error interrupt mask + \arg ENET_MSC_INT_RFAEIM: received frames alignment error interrupt mask + \arg ENET_MSC_INT_RGUFIM: received good unicast frames interrupt mask + \arg ENET_MSC_INT_TGFSCIM: transmitted good frames single collision interrupt mask + \arg ENET_MSC_INT_TGFMSCIM: transmitted good frames more single collision interrupt mask + \arg ENET_MSC_INT_TGFIM: transmitted good frames interrupt mask + \arg ENET_DMA_INT_TIE: transmit interrupt enable + \arg ENET_DMA_INT_TPSIE: transmit process stopped interrupt enable + \arg ENET_DMA_INT_TBUIE: transmit buffer unavailable interrupt enable + \arg ENET_DMA_INT_TJTIE: transmit jabber timeout interrupt enable + \arg ENET_DMA_INT_ROIE: receive overflow interrupt enable + \arg ENET_DMA_INT_TUIE: transmit underflow interrupt enable + \arg ENET_DMA_INT_RIE: receive interrupt enable + \arg ENET_DMA_INT_RBUIE: receive buffer unavailable interrupt enable + \arg ENET_DMA_INT_RPSIE: receive process stopped interrupt enable + \arg ENET_DMA_INT_RWTIE: receive watchdog timeout interrupt enable + \arg ENET_DMA_INT_ETIE: early transmit interrupt enable + \arg ENET_DMA_INT_FBEIE: fatal bus error interrupt enable + \arg ENET_DMA_INT_ERIE: early receive interrupt enable + \arg ENET_DMA_INT_AIE: abnormal interrupt summary enable + \arg ENET_DMA_INT_NIE: normal interrupt summary enable + \param[out] none + \retval none +*/ +void enet_interrupt_disable(enet_int_enum enet_int) +{ + if(DMA_INTEN_REG_OFFSET == ((uint32_t)enet_int >> 6)){ + /* ENET_DMA_INTEN register interrupt */ + ENET_REG_VAL(enet_int) &= ~BIT(ENET_BIT_POS(enet_int)); + }else{ + /* other INTMSK register interrupt */ + ENET_REG_VAL(enet_int) |= BIT(ENET_BIT_POS(enet_int)); + } +} + +/*! + \brief get ENET MAC/MSC/DMA interrupt flag + \param[in] int_flag: ENET interrupt flag, + only one parameter can be selected which is shown as below + \arg ENET_MAC_INT_FLAG_WUM: WUM status flag + \arg ENET_MAC_INT_FLAG_MSC: MSC status flag + \arg ENET_MAC_INT_FLAG_MSCR: MSC receive status flag + \arg ENET_MAC_INT_FLAG_MSCT: MSC transmit status flag + \arg ENET_MAC_INT_FLAG_TMST: time stamp trigger status flag + \arg ENET_MSC_INT_FLAG_RFCE: received frames CRC error flag + \arg ENET_MSC_INT_FLAG_RFAE: received frames alignment error flag + \arg ENET_MSC_INT_FLAG_RGUF: received good unicast frames flag + \arg ENET_MSC_INT_FLAG_TGFSC: transmitted good frames single collision flag + \arg ENET_MSC_INT_FLAG_TGFMSC: transmitted good frames more single collision flag + \arg ENET_MSC_INT_FLAG_TGF: transmitted good frames flag + \arg ENET_DMA_INT_FLAG_TS: transmit status flag + \arg ENET_DMA_INT_FLAG_TPS: transmit process stopped status flag + \arg ENET_DMA_INT_FLAG_TBU: transmit buffer unavailable status flag + \arg ENET_DMA_INT_FLAG_TJT: transmit jabber timeout status flag + \arg ENET_DMA_INT_FLAG_RO: receive overflow status flag + \arg ENET_DMA_INT_FLAG_TU: transmit underflow status flag + \arg ENET_DMA_INT_FLAG_RS: receive status flag + \arg ENET_DMA_INT_FLAG_RBU: receive buffer unavailable status flag + \arg ENET_DMA_INT_FLAG_RPS: receive process stopped status flag + \arg ENET_DMA_INT_FLAG_RWT: receive watchdog timeout status flag + \arg ENET_DMA_INT_FLAG_ET: early transmit status flag + \arg ENET_DMA_INT_FLAG_FBE: fatal bus error status flag + \arg ENET_DMA_INT_FLAG_ER: early receive status flag + \arg ENET_DMA_INT_FLAG_AI: abnormal interrupt summary flag + \arg ENET_DMA_INT_FLAG_NI: normal interrupt summary flag + \arg ENET_DMA_INT_FLAG_MSC: MSC status flag + \arg ENET_DMA_INT_FLAG_WUM: WUM status flag + \arg ENET_DMA_INT_FLAG_TST: timestamp trigger status flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus enet_interrupt_flag_get(enet_int_flag_enum int_flag) +{ + if(RESET != (ENET_REG_VAL(int_flag) & BIT(ENET_BIT_POS(int_flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear ENET DMA interrupt flag + \param[in] int_flag_clear: clear ENET interrupt flag, + only one parameter can be selected which is shown as below + \arg ENET_DMA_INT_FLAG_TS_CLR: transmit status flag + \arg ENET_DMA_INT_FLAG_TPS_CLR: transmit process stopped status flag + \arg ENET_DMA_INT_FLAG_TBU_CLR: transmit buffer unavailable status flag + \arg ENET_DMA_INT_FLAG_TJT_CLR: transmit jabber timeout status flag + \arg ENET_DMA_INT_FLAG_RO_CLR: receive overflow status flag + \arg ENET_DMA_INT_FLAG_TU_CLR: transmit underflow status flag + \arg ENET_DMA_INT_FLAG_RS_CLR: receive status flag + \arg ENET_DMA_INT_FLAG_RBU_CLR: receive buffer unavailable status flag + \arg ENET_DMA_INT_FLAG_RPS_CLR: receive process stopped status flag + \arg ENET_DMA_INT_FLAG_RWT_CLR: receive watchdog timeout status flag + \arg ENET_DMA_INT_FLAG_ET_CLR: early transmit status flag + \arg ENET_DMA_INT_FLAG_FBE_CLR: fatal bus error status flag + \arg ENET_DMA_INT_FLAG_ER_CLR: early receive status flag + \arg ENET_DMA_INT_FLAG_AI_CLR: abnormal interrupt summary flag + \arg ENET_DMA_INT_FLAG_NI_CLR: normal interrupt summary flag + \param[out] none + \retval none +*/ +void enet_interrupt_flag_clear(enet_int_flag_clear_enum int_flag_clear) +{ + /* write 1 to the corresponding bit in ENET_DMA_STAT, to clear it */ + ENET_REG_VAL(int_flag_clear) = BIT(ENET_BIT_POS(int_flag_clear)); +} + +/*! + \brief ENET Tx function enable (include MAC and DMA module) + \param[in] none + \param[out] none + \retval none +*/ +void enet_tx_enable(void) +{ + ENET_MAC_CFG |= ENET_MAC_CFG_TEN; + enet_txfifo_flush(); + ENET_DMA_CTL |= ENET_DMA_CTL_STE; +} + +/*! + \brief ENET Tx function disable (include MAC and DMA module) + \param[in] none + \param[out] none + \retval none +*/ +void enet_tx_disable(void) +{ + ENET_DMA_CTL &= ~ENET_DMA_CTL_STE; + enet_txfifo_flush(); + ENET_MAC_CFG &= ~ENET_MAC_CFG_TEN; +} + +/*! + \brief ENET Rx function enable (include MAC and DMA module) + \param[in] none + \param[out] none + \retval none +*/ +void enet_rx_enable(void) +{ + ENET_MAC_CFG |= ENET_MAC_CFG_REN; + ENET_DMA_CTL |= ENET_DMA_CTL_SRE; +} + +/*! + \brief ENET Rx function disable (include MAC and DMA module) + \param[in] none + \param[out] none + \retval none +*/ +void enet_rx_disable(void) +{ + ENET_DMA_CTL &= ~ENET_DMA_CTL_SRE; + ENET_MAC_CFG &= ~ENET_MAC_CFG_REN; +} + +/*! + \brief put registers value into the application buffer + \param[in] type: register type which will be get, refer to enet_registers_type_enum, + only one parameter can be selected which is shown as below + \arg ALL_MAC_REG: get the registers within the offset scope between ENET_MAC_CFG and ENET_MAC_FCTH + \arg ALL_MSC_REG: get the registers within the offset scope between ENET_MSC_CTL and ENET_MSC_RGUFCNT + \arg ALL_PTP_REG: get the registers within the offset scope between ENET_PTP_TSCTL and ENET_PTP_PPSCTL + \arg ALL_DMA_REG: get the registers within the offset scope between ENET_DMA_BCTL and ENET_DMA_CRBADDR + \param[in] num: the number of registers that the user want to get + \param[out] preg: the application buffer pointer for storing the register value + \retval none +*/ +void enet_registers_get(enet_registers_type_enum type, uint32_t *preg, uint32_t num) +{ + uint32_t offset = 0U, max = 0U, limit = 0U; + + offset = (uint32_t)type; + max = (uint32_t)type + num; + limit = sizeof(enet_reg_tab)/sizeof(uint16_t); + + /* prevent element in this array is out of range */ + if(max > limit){ + max = limit; + } + + for(; offset < max; offset++){ + /* get value of the corresponding register */ + *preg = REG32((ENET) + enet_reg_tab[offset]); + preg++; + } +} + +/*! + \brief enable the MAC address filter + \param[in] mac_addr: select which MAC address will be enable + \arg ENET_MAC_ADDRESS1: enable MAC address 1 filter + \arg ENET_MAC_ADDRESS2: enable MAC address 2 filter + \arg ENET_MAC_ADDRESS3: enable MAC address 3 filter + \param[out] none + \retval none +*/ +void enet_address_filter_enable(enet_macaddress_enum mac_addr) +{ + REG32(ENET_ADDRH_BASE + mac_addr) |= ENET_MAC_ADDR1H_AFE; +} + +/*! + \brief disable the MAC address filter + \param[in] mac_addr: select which MAC address will be disable, + only one parameter can be selected which is shown as below + \arg ENET_MAC_ADDRESS1: disable MAC address 1 filter + \arg ENET_MAC_ADDRESS2: disable MAC address 2 filter + \arg ENET_MAC_ADDRESS3: disable MAC address 3 filter + \param[out] none + \retval none +*/ +void enet_address_filter_disable(enet_macaddress_enum mac_addr) +{ + REG32(ENET_ADDRH_BASE + mac_addr) &= ~ENET_MAC_ADDR1H_AFE; +} + +/*! + \brief configure the MAC address filter + \param[in] mac_addr: select which MAC address will be configured, + only one parameter can be selected which is shown as below + \arg ENET_MAC_ADDRESS1: configure MAC address 1 filter + \arg ENET_MAC_ADDRESS2: configure MAC address 2 filter + \arg ENET_MAC_ADDRESS3: configure MAC address 3 filter + \param[in] addr_mask: select which MAC address bytes will be mask, + one or more parameters can be selected which are shown as below + \arg ENET_ADDRESS_MASK_BYTE0: mask ENET_MAC_ADDR1L[7:0] bits + \arg ENET_ADDRESS_MASK_BYTE1: mask ENET_MAC_ADDR1L[15:8] bits + \arg ENET_ADDRESS_MASK_BYTE2: mask ENET_MAC_ADDR1L[23:16] bits + \arg ENET_ADDRESS_MASK_BYTE3: mask ENET_MAC_ADDR1L [31:24] bits + \arg ENET_ADDRESS_MASK_BYTE4: mask ENET_MAC_ADDR1H [7:0] bits + \arg ENET_ADDRESS_MASK_BYTE5: mask ENET_MAC_ADDR1H [15:8] bits + \param[in] filter_type: select which MAC address filter type will be selected, + only one parameter can be selected which is shown as below + \arg ENET_ADDRESS_FILTER_SA: The MAC address is used to compared with the SA field of the received frame + \arg ENET_ADDRESS_FILTER_DA: The MAC address is used to compared with the DA field of the received frame + \param[out] none + \retval none +*/ +void enet_address_filter_config(enet_macaddress_enum mac_addr, uint32_t addr_mask, uint32_t filter_type) +{ + uint32_t reg; + + /* get the address filter register value which is to be configured */ + reg = REG32(ENET_ADDRH_BASE + mac_addr); + + /* clear and configure the address filter register */ + reg &= ~(ENET_MAC_ADDR1H_MB | ENET_MAC_ADDR1H_SAF); + reg |= (addr_mask | filter_type); + REG32(ENET_ADDRH_BASE + mac_addr) = reg; +} + +/*! + \brief PHY interface configuration (configure SMI clock and reset PHY chip) + \param[in] none + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus enet_phy_config(void) +{ + uint32_t ahbclk; + uint32_t reg; + uint16_t phy_value; + ErrStatus enet_state = ERROR; + + /* clear the previous MDC clock */ + reg = ENET_MAC_PHY_CTL; + reg &= ~ENET_MAC_PHY_CTL_CLR; + + /* get the HCLK frequency */ + ahbclk = rcu_clock_freq_get(CK_AHB); + + /* configure MDC clock according to HCLK frequency range */ + if(ENET_RANGE(ahbclk, 20000000U, 35000000U)){ + reg |= ENET_MDC_HCLK_DIV16; + }else if(ENET_RANGE(ahbclk, 35000000U, 60000000U)){ + reg |= ENET_MDC_HCLK_DIV26; + }else if(ENET_RANGE(ahbclk, 60000000U, 90000000U)){ + reg |= ENET_MDC_HCLK_DIV42; + }else if((ENET_RANGE(ahbclk, 90000000U, 108000000U))||(108000000U == ahbclk)){ + reg |= ENET_MDC_HCLK_DIV62; + }else{ + return enet_state; + } + ENET_MAC_PHY_CTL = reg; + + /* reset PHY */ + phy_value = PHY_RESET; + if(ERROR == (enet_phy_write_read(ENET_PHY_WRITE, PHY_ADDRESS, PHY_REG_BCR, &phy_value))){ + return enet_state; + } + /* PHY reset need some time */ + _ENET_DELAY_(ENET_DELAY_TO); + + /* check whether PHY reset is complete */ + if(ERROR == (enet_phy_write_read(ENET_PHY_READ, PHY_ADDRESS, PHY_REG_BCR, &phy_value))){ + return enet_state; + } + + /* PHY reset complete */ + if(RESET == (phy_value & PHY_RESET)){ + enet_state = SUCCESS; + } + + return enet_state; +} + +/*! + \brief write to / read from a PHY register + \param[in] direction: only one parameter can be selected which is shown as below + \arg ENET_PHY_WRITE: write data to phy register + \arg ENET_PHY_READ: read data from phy register + \param[in] phy_address: 0x0 - 0x1F + \param[in] phy_reg: 0x0 - 0x1F + \param[in] pvalue: the value will be written to the PHY register in ENET_PHY_WRITE direction + \param[out] pvalue: the value will be read from the PHY register in ENET_PHY_READ direction + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus enet_phy_write_read(enet_phydirection_enum direction, uint16_t phy_address, uint16_t phy_reg, uint16_t *pvalue) +{ + uint32_t reg, phy_flag; + uint32_t timeout = 0U; + ErrStatus enet_state = ERROR; + + /* configure ENET_MAC_PHY_CTL with write/read operation */ + reg = ENET_MAC_PHY_CTL; + reg &= ~(ENET_MAC_PHY_CTL_PB | ENET_MAC_PHY_CTL_PW | ENET_MAC_PHY_CTL_PR | ENET_MAC_PHY_CTL_PA); + reg |= (direction | MAC_PHY_CTL_PR(phy_reg) | MAC_PHY_CTL_PA(phy_address) | ENET_MAC_PHY_CTL_PB); + + /* if do the write operation, write value to the register */ + if(ENET_PHY_WRITE == direction){ + ENET_MAC_PHY_DATA = *pvalue; + } + + /* do PHY write/read operation, and wait the operation complete */ + ENET_MAC_PHY_CTL = reg; + do{ + phy_flag = (ENET_MAC_PHY_CTL & ENET_MAC_PHY_CTL_PB); + timeout++; + } + while((RESET != phy_flag) && (ENET_DELAY_TO != timeout)); + + /* write/read operation complete */ + if(RESET == (ENET_MAC_PHY_CTL & ENET_MAC_PHY_CTL_PB)){ + enet_state = SUCCESS; + } + + /* if do the read operation, get value from the register */ + if(ENET_PHY_READ == direction){ + *pvalue = (uint16_t)ENET_MAC_PHY_DATA; + } + + return enet_state; +} + +/*! + \brief enable the loopback function of PHY chip + \param[in] none + \param[out] none + \retval ErrStatus: ERROR or SUCCESS +*/ +ErrStatus enet_phyloopback_enable(void) +{ + uint16_t temp_phy = 0U; + ErrStatus phy_state = ERROR; + + /* get the PHY configuration to update it */ + enet_phy_write_read(ENET_PHY_READ, PHY_ADDRESS, PHY_REG_BCR, &temp_phy); + + /* enable the PHY loopback mode */ + temp_phy |= PHY_LOOPBACK; + + /* update the PHY control register with the new configuration */ + phy_state = enet_phy_write_read(ENET_PHY_WRITE, PHY_ADDRESS, PHY_REG_BCR, &temp_phy); + + return phy_state; +} + +/*! + \brief disable the loopback function of PHY chip + \param[in] none + \param[out] none + \retval ErrStatus: ERROR or SUCCESS +*/ +ErrStatus enet_phyloopback_disable(void) +{ + uint16_t temp_phy = 0U; + ErrStatus phy_state = ERROR; + + /* get the PHY configuration to update it */ + enet_phy_write_read(ENET_PHY_READ, PHY_ADDRESS, PHY_REG_BCR, &temp_phy); + + /* disable the PHY loopback mode */ + temp_phy &= (uint16_t)~PHY_LOOPBACK; + + /* update the PHY control register with the new configuration */ + phy_state = enet_phy_write_read(ENET_PHY_WRITE, PHY_ADDRESS, PHY_REG_BCR, &temp_phy); + + return phy_state; +} + +/*! + \brief enable ENET forward feature + \param[in] feature: the feature of ENET forward mode, + one or more parameters can be selected which are shown as below + \arg ENET_AUTO_PADCRC_DROP: the function of the MAC strips the Pad/FCS field on received frames + \arg ENET_FORWARD_ERRFRAMES: the function that all frame received with error except runt error are forwarded to memory + \arg ENET_FORWARD_UNDERSZ_GOODFRAMES: the function that forwarding undersized good frames + \param[out] none + \retval none +*/ +void enet_forward_feature_enable(uint32_t feature) +{ + uint32_t mask; + + mask = (feature & (~(ENET_FORWARD_ERRFRAMES | ENET_FORWARD_UNDERSZ_GOODFRAMES))); + ENET_MAC_CFG |= mask; + + mask = (feature & (~(ENET_AUTO_PADCRC_DROP))); + ENET_DMA_CTL |= (mask >> 2); +} + +/*! + \brief disable ENET forward feature + \param[in] feature: the feature of ENET forward mode, + one or more parameters can be selected which are shown as below + \arg ENET_AUTO_PADCRC_DROP: the automatic zero-quanta generation function + \arg ENET_FORWARD_ERRFRAMES: decoding function for the received pause frame and process it + \arg ENET_FORWARD_UNDERSZ_GOODFRAMES: back pressure operation in the MAC(only use in half-dulex mode) + \param[out] none + \retval none +*/ +void enet_forward_feature_disable(uint32_t feature) +{ + uint32_t mask; + + mask = (feature & (~(ENET_FORWARD_ERRFRAMES | ENET_FORWARD_UNDERSZ_GOODFRAMES))); + ENET_MAC_CFG &= ~mask; + + mask = (feature & (~(ENET_AUTO_PADCRC_DROP))); + ENET_DMA_CTL &= ~(mask >> 2); +} + +/*! + \brief enable ENET fliter feature + \param[in] feature: the feature of ENET fliter mode, + one or more parameters can be selected which are shown as below + \arg ENET_SRC_FILTER: filter source address function + \arg ENET_SRC_FILTER_INVERSE: inverse source address filtering result function + \arg ENET_DEST_FILTER_INVERSE: inverse DA filtering result function + \arg ENET_MULTICAST_FILTER_PASS: pass all multicast frames function + \arg ENET_MULTICAST_FILTER_HASH_MODE: HASH multicast filter function + \arg ENET_UNICAST_FILTER_HASH_MODE: HASH unicast filter function + \arg ENET_FILTER_MODE_EITHER: HASH or perfect filter function + \param[out] none + \retval none +*/ +void enet_fliter_feature_enable(uint32_t feature) +{ + ENET_MAC_FRMF |= feature; +} + +/*! + \brief disable ENET fliter feature + \param[in] feature: the feature of ENET fliter mode, + one or more parameters can be selected which are shown as below + \arg ENET_SRC_FILTER: filter source address function + \arg ENET_SRC_FILTER_INVERSE: inverse source address filtering result function + \arg ENET_DEST_FILTER_INVERSE: inverse DA filtering result function + \arg ENET_MULTICAST_FILTER_PASS: pass all multicast frames function + \arg ENET_MULTICAST_FILTER_HASH_MODE: HASH multicast filter function + \arg ENET_UNICAST_FILTER_HASH_MODE: HASH unicast filter function + \arg ENET_FILTER_MODE_EITHER: HASH or perfect filter function + \param[out] none + \retval none +*/ +void enet_fliter_feature_disable(uint32_t feature) +{ + ENET_MAC_FRMF &= ~feature; +} + +/*! + \brief generate the pause frame, ENET will send pause frame after enable transmit flow control + this function only use in full-dulex mode + \param[in] none + \param[out] none + \retval ErrStatus: ERROR or SUCCESS +*/ +ErrStatus enet_pauseframe_generate(void) +{ + ErrStatus enet_state =ERROR; + uint32_t temp = 0U; + + /* in full-duplex mode, must make sure this bit is 0 before writing register */ + temp = ENET_MAC_FCTL & ENET_MAC_FCTL_FLCBBKPA; + if(RESET == temp){ + ENET_MAC_FCTL |= ENET_MAC_FCTL_FLCBBKPA; + enet_state = SUCCESS; + } + return enet_state; +} + +/*! + \brief configure the pause frame detect type + \param[in] detect: pause frame detect type, + only one parameter can be selected which is shown as below + \arg ENET_MAC0_AND_UNIQUE_ADDRESS_PAUSEDETECT: besides the unique multicast address, MAC can also + use the MAC0 address to detecting pause frame + \arg ENET_UNIQUE_PAUSEDETECT: only the unique multicast address for pause frame which is specified + in IEEE802.3 can be detected + \param[out] none + \retval none +*/ +void enet_pauseframe_detect_config(uint32_t detect) +{ + ENET_MAC_FCTL &= ~ENET_MAC_FCTL_UPFDT; + ENET_MAC_FCTL |= detect; +} + +/*! + \brief configure the pause frame parameters + \param[in] pausetime: pause time in transmit pause control frame + \param[in] pause_threshold: the threshold of the pause timer for retransmitting frames automatically, + this value must make sure to be less than configured pause time, only one parameter can be + selected which is shown as below + \arg ENET_PAUSETIME_MINUS4: pause time minus 4 slot times + \arg ENET_PAUSETIME_MINUS28: pause time minus 28 slot times + \arg ENET_PAUSETIME_MINUS144: pause time minus 144 slot times + \arg ENET_PAUSETIME_MINUS256: pause time minus 256 slot times + \param[out] none + \retval none +*/ +void enet_pauseframe_config(uint32_t pausetime, uint32_t pause_threshold) +{ + ENET_MAC_FCTL &= ~(ENET_MAC_FCTL_PTM | ENET_MAC_FCTL_PLTS); + ENET_MAC_FCTL |= (MAC_FCTL_PTM(pausetime) | pause_threshold); +} + +/*! + \brief configure the threshold of the flow control(deactive and active threshold) + \param[in] deactive: the threshold of the deactive flow control, this value + should always be less than active flow control value, only one + parameter can be selected which is shown as below + \arg ENET_DEACTIVE_THRESHOLD_256BYTES: threshold level is 256 bytes + \arg ENET_DEACTIVE_THRESHOLD_512BYTES: threshold level is 512 bytes + \arg ENET_DEACTIVE_THRESHOLD_768BYTES: threshold level is 768 bytes + \arg ENET_DEACTIVE_THRESHOLD_1024BYTES: threshold level is 1024 bytes + \arg ENET_DEACTIVE_THRESHOLD_1280BYTES: threshold level is 1280 bytes + \arg ENET_DEACTIVE_THRESHOLD_1536BYTES: threshold level is 1536 bytes + \arg ENET_DEACTIVE_THRESHOLD_1792BYTES: threshold level is 1792 bytes + \param[in] active: the threshold of the active flow control, only one parameter + can be selected which is shown as below + \arg ENET_ACTIVE_THRESHOLD_256BYTES: threshold level is 256 bytes + \arg ENET_ACTIVE_THRESHOLD_512BYTES: threshold level is 512 bytes + \arg ENET_ACTIVE_THRESHOLD_768BYTES: threshold level is 768 bytes + \arg ENET_ACTIVE_THRESHOLD_1024BYTES: threshold level is 1024 bytes + \arg ENET_ACTIVE_THRESHOLD_1280BYTES: threshold level is 1280 bytes + \arg ENET_ACTIVE_THRESHOLD_1536BYTES: threshold level is 1536 bytes + \arg ENET_ACTIVE_THRESHOLD_1792BYTES: threshold level is 1792 bytes + \param[out] none + \retval none +*/ +void enet_flowcontrol_threshold_config(uint32_t deactive, uint32_t active) +{ + ENET_MAC_FCTH = ((deactive | active) >> 8); +} + +/*! + \brief enable ENET flow control feature + \param[in] feature: the feature of ENET flow control mode + one or more parameters can be selected which are shown as below + \arg ENET_ZERO_QUANTA_PAUSE: the automatic zero-quanta generation function + \arg ENET_TX_FLOWCONTROL: the flow control operation in the MAC + \arg ENET_RX_FLOWCONTROL: decoding function for the received pause frame and process it + \arg ENET_BACK_PRESSURE: back pressure operation in the MAC(only use in half-dulex mode) + \param[out] none + \retval none +*/ +void enet_flowcontrol_feature_enable(uint32_t feature) +{ + if(RESET != (feature & ENET_ZERO_QUANTA_PAUSE)){ + ENET_MAC_FCTL &= ~ENET_ZERO_QUANTA_PAUSE; + } + feature &= ~ENET_ZERO_QUANTA_PAUSE; + ENET_MAC_FCTL |= feature; +} + +/*! + \brief disable ENET flow control feature + \param[in] feature: the feature of ENET flow control mode + one or more parameters can be selected which are shown as below + \arg ENET_ZERO_QUANTA_PAUSE: the automatic zero-quanta generation function + \arg ENET_TX_FLOWCONTROL: the flow control operation in the MAC + \arg ENET_RX_FLOWCONTROL: decoding function for the received pause frame and process it + \arg ENET_BACK_PRESSURE: back pressure operation in the MAC(only use in half-dulex mode) + \param[out] none + \retval none +*/ +void enet_flowcontrol_feature_disable(uint32_t feature) +{ + if(RESET != (feature & ENET_ZERO_QUANTA_PAUSE)){ + ENET_MAC_FCTL |= ENET_ZERO_QUANTA_PAUSE; + } + feature &= ~ENET_ZERO_QUANTA_PAUSE; + ENET_MAC_FCTL &= ~feature; +} + +/*! + \brief get the dma transmit/receive process state + \param[in] direction: choose the direction of dma process which users want to check, + refer to enet_dmadirection_enum, only one parameter can be selected which is shown as below + \arg ENET_DMA_TX: dma transmit process + \arg ENET_DMA_RX: dma receive process + \param[out] none + \retval state of dma process, the value range shows below: + ENET_RX_STATE_STOPPED, ENET_RX_STATE_FETCHING, ENET_RX_STATE_WAITING, + ENET_RX_STATE_SUSPENDED, ENET_RX_STATE_CLOSING, ENET_RX_STATE_QUEUING, + ENET_TX_STATE_STOPPED, ENET_TX_STATE_FETCHING, ENET_TX_STATE_WAITING, + ENET_TX_STATE_READING, ENET_TX_STATE_SUSPENDED, ENET_TX_STATE_CLOSING +*/ +uint32_t enet_dmaprocess_state_get(enet_dmadirection_enum direction) +{ + uint32_t reval; + reval = (uint32_t)(ENET_DMA_STAT & (uint32_t)direction); + return reval; +} + +/*! + \brief poll the DMA transmission/reception enable by writing any value to the + ENET_DMA_TPEN/ENET_DMA_RPEN register, this will make the DMA to resume transmission/reception + \param[in] direction: choose the direction of DMA process which users want to resume, + refer to enet_dmadirection_enum, only one parameter can be selected which is shown as below + \arg ENET_DMA_TX: DMA transmit process + \arg ENET_DMA_RX: DMA receive process + \param[out] none + \retval none +*/ +void enet_dmaprocess_resume(enet_dmadirection_enum direction) +{ + if(ENET_DMA_TX == direction){ + ENET_DMA_TPEN = 0U; + }else{ + ENET_DMA_RPEN = 0U; + } +} + +/*! + \brief check and recover the Rx process + \param[in] none + \param[out] none + \retval none +*/ +void enet_rxprocess_check_recovery(void) +{ + uint32_t status; + + /* get DAV information of current RxDMA descriptor */ + status = dma_current_rxdesc->status; + status &= ENET_RDES0_DAV; + + /* if current descriptor is owned by DMA, but the descriptor address mismatches with + receive descriptor address pointer updated by RxDMA controller */ + if((ENET_DMA_CRDADDR != ((uint32_t)dma_current_rxdesc)) && + (ENET_RDES0_DAV == status)){ + dma_current_rxdesc = (enet_descriptors_struct*)ENET_DMA_CRDADDR; + } +} + +/*! + \brief flush the ENET transmit FIFO, and wait until the flush operation completes + \param[in] none + \param[out] none + \retval ErrStatus: ERROR or SUCCESS +*/ +ErrStatus enet_txfifo_flush(void) +{ + uint32_t flush_state; + uint32_t timeout = 0U; + ErrStatus enet_state = ERROR; + + /* set the FTF bit for flushing transmit FIFO */ + ENET_DMA_CTL |= ENET_DMA_CTL_FTF; + /* wait until the flush operation completes */ + do{ + flush_state = ENET_DMA_CTL & ENET_DMA_CTL_FTF; + timeout++; + }while((RESET != flush_state) && (timeout < ENET_DELAY_TO)); + /* return ERROR due to timeout */ + if(RESET == flush_state){ + enet_state = SUCCESS; + } + + return enet_state; +} + +/*! + \brief get the transmit/receive address of current descriptor, or current buffer, or descriptor table + \param[in] addr_get: choose the address which users want to get, refer to enet_desc_reg_enum, + only one parameter can be selected which is shown as below + \arg ENET_RX_DESC_TABLE: the start address of the receive descriptor table + \arg ENET_RX_CURRENT_DESC: the start descriptor address of the current receive descriptor read by + the RxDMA controller + \arg ENET_RX_CURRENT_BUFFER: the current receive buffer address being read by the RxDMA controller + \arg ENET_TX_DESC_TABLE: the start address of the transmit descriptor table + \arg ENET_TX_CURRENT_DESC: the start descriptor address of the current transmit descriptor read by + the TxDMA controller + \arg ENET_TX_CURRENT_BUFFER: the current transmit buffer address being read by the TxDMA controller + \param[out] none + \retval address value +*/ +uint32_t enet_current_desc_address_get(enet_desc_reg_enum addr_get) +{ + uint32_t reval = 0U; + + reval = REG32((ENET) +(uint32_t)addr_get); + return reval; +} + +/*! + \brief get the Tx or Rx descriptor information + \param[in] desc: the descriptor pointer which users want to get information + \param[in] info_get: the descriptor information type which is selected, + only one parameter can be selected which is shown as below + \arg RXDESC_BUFFER_1_SIZE: receive buffer 1 size + \arg RXDESC_BUFFER_2_SIZE: receive buffer 2 size + \arg RXDESC_FRAME_LENGTH: the byte length of the received frame that was transferred to the buffer + \arg TXDESC_COLLISION_COUNT: the number of collisions occurred before the frame was transmitted + \arg RXDESC_BUFFER_1_ADDR: the buffer1 address of the Rx frame + \arg TXDESC_BUFFER_1_ADDR: the buffer1 address of the Tx frame + \param[out] none + \retval descriptor information, if value is 0xFFFFFFFFU, means the false input parameter +*/ +uint32_t enet_desc_information_get(enet_descriptors_struct *desc, enet_descstate_enum info_get) +{ + uint32_t reval = 0xFFFFFFFFU; + + switch(info_get){ + case RXDESC_BUFFER_1_SIZE: + reval = GET_RDES1_RB1S(desc->control_buffer_size); + break; + case RXDESC_BUFFER_2_SIZE: + reval = GET_RDES1_RB2S(desc->control_buffer_size); + break; + case RXDESC_FRAME_LENGTH: + reval = GET_RDES0_FRML(desc->status); + if(reval > 4U){ + reval = reval - 4U; + }else{ + reval = 0U; + } + break; + case RXDESC_BUFFER_1_ADDR: + reval = desc->buffer1_addr; + break; + case TXDESC_BUFFER_1_ADDR: + reval = desc->buffer1_addr; + break; + case TXDESC_COLLISION_COUNT: + reval = GET_TDES0_COCNT(desc->status); + break; + default: + break; + } + return reval; +} + +/*! + \brief get the number of missed frames during receiving + \param[in] none + \param[out] rxfifo_drop: pointer to the number of frames dropped by RxFIFO + \param[out] rxdma_drop: pointer to the number of frames missed by the RxDMA controller + \retval none +*/ +void enet_missed_frame_counter_get(uint32_t *rxfifo_drop, uint32_t *rxdma_drop) +{ + uint32_t temp_counter = 0U; + + temp_counter = ENET_DMA_MFBOCNT; + *rxfifo_drop = GET_DMA_MFBOCNT_MSFA(temp_counter); + *rxdma_drop = GET_DMA_MFBOCNT_MSFC(temp_counter); +} + +/*! + \brief get the bit flag of ENET DMA descriptor + \param[in] desc: the descriptor pointer which users want to get flag + \param[in] desc_flag: the bit flag of ENET DMA descriptor, + only one parameter can be selected which is shown as below + \arg ENET_TDES0_DB: deferred + \arg ENET_TDES0_UFE: underflow error + \arg ENET_TDES0_EXD: excessive deferral + \arg ENET_TDES0_VFRM: VLAN frame + \arg ENET_TDES0_ECO: excessive collision + \arg ENET_TDES0_LCO: late collision + \arg ENET_TDES0_NCA: no carrier + \arg ENET_TDES0_LCA: loss of carrier + \arg ENET_TDES0_IPPE: IP payload error + \arg ENET_TDES0_FRMF: frame flushed + \arg ENET_TDES0_JT: jabber timeout + \arg ENET_TDES0_ES: error summary + \arg ENET_TDES0_IPHE: IP header error + \arg ENET_TDES0_TTMSS: transmit timestamp status + \arg ENET_TDES0_TCHM: the second address chained mode + \arg ENET_TDES0_TERM: transmit end of ring mode + \arg ENET_TDES0_TTSEN: transmit timestamp function enable + \arg ENET_TDES0_DPAD: disable adding pad + \arg ENET_TDES0_DCRC: disable CRC + \arg ENET_TDES0_FSG: first segment + \arg ENET_TDES0_LSG: last segment + \arg ENET_TDES0_INTC: interrupt on completion + \arg ENET_TDES0_DAV: DAV bit + + \arg ENET_RDES0_PCERR: payload checksum error + \arg ENET_RDES0_CERR: CRC error + \arg ENET_RDES0_DBERR: dribble bit error + \arg ENET_RDES0_RERR: receive error + \arg ENET_RDES0_RWDT: receive watchdog timeout + \arg ENET_RDES0_FRMT: frame type + \arg ENET_RDES0_LCO: late collision + \arg ENET_RDES0_IPHERR: IP frame header error + \arg ENET_RDES0_LDES: last descriptor + \arg ENET_RDES0_FDES: first descriptor + \arg ENET_RDES0_VTAG: VLAN tag + \arg ENET_RDES0_OERR: overflow error + \arg ENET_RDES0_LERR: length error + \arg ENET_RDES0_SAFF: SA filter fail + \arg ENET_RDES0_DERR: descriptor error + \arg ENET_RDES0_ERRS: error summary + \arg ENET_RDES0_DAFF: destination address filter fail + \arg ENET_RDES0_DAV: descriptor available + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus enet_desc_flag_get(enet_descriptors_struct *desc, uint32_t desc_flag) +{ + FlagStatus enet_flag = RESET; + + if ((uint32_t)RESET != (desc->status & desc_flag)){ + enet_flag = SET; + } + + return enet_flag; +} + +/*! + \brief set the bit flag of ENET DMA descriptor + \param[in] desc: the descriptor pointer which users want to set flag + \param[in] desc_flag: the bit flag of ENET DMA descriptor, + only one parameter can be selected which is shown as below + \arg ENET_TDES0_VFRM: VLAN frame + \arg ENET_TDES0_FRMF: frame flushed + \arg ENET_TDES0_TCHM: the second address chained mode + \arg ENET_TDES0_TERM: transmit end of ring mode + \arg ENET_TDES0_TTSEN: transmit timestamp function enable + \arg ENET_TDES0_DPAD: disable adding pad + \arg ENET_TDES0_DCRC: disable CRC + \arg ENET_TDES0_FSG: first segment + \arg ENET_TDES0_LSG: last segment + \arg ENET_TDES0_INTC: interrupt on completion + \arg ENET_TDES0_DAV: DAV bit + \arg ENET_RDES0_DAV: descriptor available + \param[out] none + \retval none +*/ +void enet_desc_flag_set(enet_descriptors_struct *desc, uint32_t desc_flag) +{ + desc->status |= desc_flag; +} + +/*! + \brief clear the bit flag of ENET DMA descriptor + \param[in] desc: the descriptor pointer which users want to clear flag + \param[in] desc_flag: the bit flag of ENET DMA descriptor, + only one parameter can be selected which is shown as below + \arg ENET_TDES0_VFRM: VLAN frame + \arg ENET_TDES0_FRMF: frame flushed + \arg ENET_TDES0_TCHM: the second address chained mode + \arg ENET_TDES0_TERM: transmit end of ring mode + \arg ENET_TDES0_TTSEN: transmit timestamp function enable + \arg ENET_TDES0_DPAD: disable adding pad + \arg ENET_TDES0_DCRC: disable CRC + \arg ENET_TDES0_FSG: first segment + \arg ENET_TDES0_LSG: last segment + \arg ENET_TDES0_INTC: interrupt on completion + \arg ENET_TDES0_DAV: DAV bit + \arg ENET_RDES0_DAV: descriptor available + \param[out] none + \retval none +*/ +void enet_desc_flag_clear(enet_descriptors_struct *desc, uint32_t desc_flag) +{ + desc->status &= ~desc_flag; +} + +/*! + \brief when receiving completed, set RS bit in ENET_DMA_STAT register will set + \param[in] desc: the descriptor pointer which users want to configure + \param[out] none + \retval none +*/ +void enet_desc_receive_complete_bit_enable(enet_descriptors_struct *desc) +{ + desc->control_buffer_size &= ~ENET_RDES1_DINTC; +} + +/*! + \brief when receiving completed, set RS bit in ENET_DMA_STAT register will not set + \param[in] desc: the descriptor pointer which users want to configure + \param[out] none + \retval none +*/ +void enet_desc_receive_complete_bit_disable(enet_descriptors_struct *desc) +{ + desc->control_buffer_size |= ENET_RDES1_DINTC; +} + +/*! + \brief drop current receive frame + \param[in] none + \param[out] none + \retval none +*/ +void enet_rxframe_drop(void) +{ + /* enable reception, descriptor is owned by DMA */ + dma_current_rxdesc->status = ENET_RDES0_DAV; + + /* chained mode */ + if((uint32_t)RESET != (dma_current_rxdesc->control_buffer_size & ENET_RDES1_RCHM)){ + if(NULL != dma_current_ptp_rxdesc){ + dma_current_rxdesc = (enet_descriptors_struct*) (dma_current_ptp_rxdesc->buffer2_next_desc_addr); + /* if it is the last ptp descriptor */ + if(0U != dma_current_ptp_rxdesc->status){ + /* pointer back to the first ptp descriptor address in the desc_ptptab list address */ + dma_current_ptp_rxdesc = (enet_descriptors_struct*) (dma_current_ptp_rxdesc->status); + }else{ + /* ponter to the next ptp descriptor */ + dma_current_ptp_rxdesc++; + } + }else{ + dma_current_rxdesc = (enet_descriptors_struct*) (dma_current_rxdesc->buffer2_next_desc_addr); + } + + }else{ + /* ring mode */ + if((uint32_t)RESET != (dma_current_rxdesc->control_buffer_size & ENET_RDES1_RERM)){ + /* if is the last descriptor in table, the next descriptor is the table header */ + dma_current_rxdesc = (enet_descriptors_struct*) (ENET_DMA_RDTADDR); + if(NULL != dma_current_ptp_rxdesc){ + dma_current_ptp_rxdesc = (enet_descriptors_struct*) (dma_current_ptp_rxdesc->status); + } + }else{ + /* the next descriptor is the current address, add the descriptor size, and descriptor skip length */ + dma_current_rxdesc = (enet_descriptors_struct*) (uint32_t)((uint32_t)dma_current_rxdesc + ETH_DMARXDESC_SIZE + GET_DMA_BCTL_DPSL(ENET_DMA_BCTL)); + if(NULL != dma_current_ptp_rxdesc){ + dma_current_ptp_rxdesc++; + } + } + } +} + +/*! + \brief enable DMA feature + \param[in] feature: the feature of DMA mode, + one or more parameters can be selected which are shown as below + \arg ENET_NO_FLUSH_RXFRAME: RxDMA does not flushes frames function + \arg ENET_SECONDFRAME_OPT: TxDMA controller operate on second frame function + \param[out] none + \retval none +*/ +void enet_dma_feature_enable(uint32_t feature) +{ + ENET_DMA_CTL |= feature; +} + +/*! + \brief disable DMA feature + \param[in] feature: the feature of DMA mode, + one or more parameters can be selected which are shown as below + \arg ENET_NO_FLUSH_RXFRAME: RxDMA does not flushes frames function + \arg ENET_SECONDFRAME_OPT: TxDMA controller operate on second frame function + \param[out] none + \retval none +*/ +void enet_dma_feature_disable(uint32_t feature) +{ + ENET_DMA_CTL &= ~feature; +} + +/*! + \brief initialize the DMA Tx/Rx descriptors's parameters in normal chain mode with PTP function + \param[in] direction: the descriptors which users want to init, refer to enet_dmadirection_enum, + only one parameter can be selected which is shown as below + \arg ENET_DMA_TX: DMA Tx descriptors + \arg ENET_DMA_RX: DMA Rx descriptors + \param[in] desc_ptptab: pointer to the first descriptor address of PTP Rx descriptor table + \param[out] none + \retval none +*/ +void enet_ptp_normal_descriptors_chain_init(enet_dmadirection_enum direction, enet_descriptors_struct *desc_ptptab) +{ + uint32_t num = 0U, count = 0U, maxsize = 0U; + uint32_t desc_status = 0U, desc_bufsize = 0U; + enet_descriptors_struct *desc, *desc_tab; + uint8_t *buf; + + /* if want to initialize DMA Tx descriptors */ + if (ENET_DMA_TX == direction){ + /* save a copy of the DMA Tx descriptors */ + desc_tab = txdesc_tab; + buf = &tx_buff[0][0]; + count = ENET_TXBUF_NUM; + maxsize = ENET_TXBUF_SIZE; + + /* select chain mode, and enable transmit timestamp function */ + desc_status = ENET_TDES0_TCHM | ENET_TDES0_TTSEN; + + /* configure DMA Tx descriptor table address register */ + ENET_DMA_TDTADDR = (uint32_t)desc_tab; + dma_current_txdesc = desc_tab; + dma_current_ptp_txdesc = desc_ptptab; + }else{ + /* if want to initialize DMA Rx descriptors */ + /* save a copy of the DMA Rx descriptors */ + desc_tab = rxdesc_tab; + buf = &rx_buff[0][0]; + count = ENET_RXBUF_NUM; + maxsize = ENET_RXBUF_SIZE; + + /* enable receiving */ + desc_status = ENET_RDES0_DAV; + /* select receive chained mode and set buffer1 size */ + desc_bufsize = ENET_RDES1_RCHM | (uint32_t)ENET_RXBUF_SIZE; + + /* configure DMA Rx descriptor table address register */ + ENET_DMA_RDTADDR = (uint32_t)desc_tab; + dma_current_rxdesc = desc_tab; + dma_current_ptp_rxdesc = desc_ptptab; + } + + /* configure each descriptor */ + for(num = 0U; num < count; num++){ + /* get the pointer to the next descriptor of the descriptor table */ + desc = desc_tab + num; + + /* configure descriptors */ + desc->status = desc_status; + desc->control_buffer_size = desc_bufsize; + desc->buffer1_addr = (uint32_t)(&buf[num * maxsize]); + + /* if is not the last descriptor */ + if(num < (count - 1U)){ + /* configure the next descriptor address */ + desc->buffer2_next_desc_addr = (uint32_t)(desc_tab + num + 1U); + }else{ + /* when it is the last descriptor, the next descriptor address + equals to first descriptor address in descriptor table */ + desc->buffer2_next_desc_addr = (uint32_t)desc_tab; + } + /* set desc_ptptab equal to desc_tab */ + (&desc_ptptab[num])->buffer1_addr = desc->buffer1_addr; + (&desc_ptptab[num])->buffer2_next_desc_addr = desc->buffer2_next_desc_addr; + } + /* when it is the last ptp descriptor, preserve the first descriptor + address of desc_ptptab in ptp descriptor status */ + (&desc_ptptab[num-1U])->status = (uint32_t)desc_ptptab; +} + +/*! + \brief initialize the DMA Tx/Rx descriptors's parameters in normal ring mode with PTP function + \param[in] direction: the descriptors which users want to init, refer to enet_dmadirection_enum, + only one parameter can be selected which is shown as below + \arg ENET_DMA_TX: DMA Tx descriptors + \arg ENET_DMA_RX: DMA Rx descriptors + \param[in] desc_ptptab: pointer to the first descriptor address of PTP Rx descriptor table + \param[out] none + \retval none +*/ +void enet_ptp_normal_descriptors_ring_init(enet_dmadirection_enum direction, enet_descriptors_struct *desc_ptptab) +{ + uint32_t num = 0U, count = 0U, maxsize = 0U; + uint32_t desc_status = 0U, desc_bufsize = 0U; + enet_descriptors_struct *desc, *desc_tab; + uint8_t *buf; + + /* configure descriptor skip length */ + ENET_DMA_BCTL &= ~ENET_DMA_BCTL_DPSL; + ENET_DMA_BCTL |= DMA_BCTL_DPSL(0); + + /* if want to initialize DMA Tx descriptors */ + if (ENET_DMA_TX == direction){ + /* save a copy of the DMA Tx descriptors */ + desc_tab = txdesc_tab; + buf = &tx_buff[0][0]; + count = ENET_TXBUF_NUM; + maxsize = ENET_TXBUF_SIZE; + + /* select ring mode, and enable transmit timestamp function */ + desc_status = ENET_TDES0_TTSEN; + + /* configure DMA Tx descriptor table address register */ + ENET_DMA_TDTADDR = (uint32_t)desc_tab; + dma_current_txdesc = desc_tab; + dma_current_ptp_txdesc = desc_ptptab; + }else{ + /* if want to initialize DMA Rx descriptors */ + /* save a copy of the DMA Rx descriptors */ + desc_tab = rxdesc_tab; + buf = &rx_buff[0][0]; + count = ENET_RXBUF_NUM; + maxsize = ENET_RXBUF_SIZE; + + /* enable receiving */ + desc_status = ENET_RDES0_DAV; + /* select receive ring mode and set buffer1 size */ + desc_bufsize = (uint32_t)ENET_RXBUF_SIZE; + + /* configure DMA Rx descriptor table address register */ + ENET_DMA_RDTADDR = (uint32_t)desc_tab; + dma_current_rxdesc = desc_tab; + dma_current_ptp_rxdesc = desc_ptptab; + } + + /* configure each descriptor */ + for(num = 0U; num < count; num++){ + /* get the pointer to the next descriptor of the descriptor table */ + desc = desc_tab + num; + + /* configure descriptors */ + desc->status = desc_status; + desc->control_buffer_size = desc_bufsize; + desc->buffer1_addr = (uint32_t)(&buf[num * maxsize]); + + /* when it is the last descriptor */ + if(num == (count - 1U)){ + if (ENET_DMA_TX == direction){ + /* configure transmit end of ring mode */ + desc->status |= ENET_TDES0_TERM; + }else{ + /* configure receive end of ring mode */ + desc->control_buffer_size |= ENET_RDES1_RERM; + } + } + /* set desc_ptptab equal to desc_tab */ + (&desc_ptptab[num])->buffer1_addr = desc->buffer1_addr; + (&desc_ptptab[num])->buffer2_next_desc_addr = desc->buffer2_next_desc_addr; + } + /* when it is the last ptp descriptor, preserve the first descriptor + address of desc_ptptab in ptp descriptor status */ + (&desc_ptptab[num-1U])->status = (uint32_t)desc_ptptab; +} + +/*! + \brief receive a packet data with timestamp values to application buffer, when the DMA is in normal mode + \param[in] bufsize: the size of buffer which is the parameter in function + \param[out] timestamp: pointer to the table which stores the timestamp high and low + \param[out] buffer: pointer to the application buffer + note -- if the input is NULL, user should copy data in application by himself + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus enet_ptpframe_receive_normal_mode(uint8_t *buffer, uint32_t bufsize, uint32_t timestamp[]) +{ + uint32_t offset = 0U, size = 0U; + + /* the descriptor is busy due to own by the DMA */ + if((uint32_t)RESET != (dma_current_rxdesc->status & ENET_RDES0_DAV)){ + return ERROR; + } + + /* if buffer pointer is null, indicates that users has copied data in application */ + if(NULL != buffer){ + /* if no error occurs, and the frame uses only one descriptor */ + if(((uint32_t)RESET == (dma_current_rxdesc->status & ENET_RDES0_ERRS)) && + ((uint32_t)RESET != (dma_current_rxdesc->status & ENET_RDES0_LDES)) && + ((uint32_t)RESET != (dma_current_rxdesc->status & ENET_RDES0_FDES))){ + + /* get the frame length except CRC */ + size = GET_RDES0_FRML(dma_current_rxdesc->status) - 4U; + + /* to avoid situation that the frame size exceeds the buffer length */ + if(size > bufsize){ + return ERROR; + } + + /* copy data from Rx buffer to application buffer */ + for(offset = 0U; offset < size; offset++){ + (*(buffer + offset)) = (*(__IO uint8_t *)(uint32_t)((dma_current_ptp_rxdesc->buffer1_addr) + offset)); + } + + }else{ + return ERROR; + } + } + /* copy timestamp value from Rx descriptor to application array */ + timestamp[0] = dma_current_rxdesc->buffer1_addr; + timestamp[1] = dma_current_rxdesc->buffer2_next_desc_addr; + + dma_current_rxdesc->buffer1_addr = dma_current_ptp_rxdesc ->buffer1_addr ; + dma_current_rxdesc->buffer2_next_desc_addr = dma_current_ptp_rxdesc ->buffer2_next_desc_addr; + + /* enable reception, descriptor is owned by DMA */ + dma_current_rxdesc->status = ENET_RDES0_DAV; + + /* check Rx buffer unavailable flag status */ + if ((uint32_t)RESET != (ENET_DMA_STAT & ENET_DMA_STAT_RBU)){ + /* clear RBU flag */ + ENET_DMA_STAT = ENET_DMA_STAT_RBU; + /* resume DMA reception by writing to the RPEN register*/ + ENET_DMA_RPEN = 0U; + } + + + /* update the current RxDMA descriptor pointer to the next decriptor in RxDMA decriptor table */ + /* chained mode */ + if((uint32_t)RESET != (dma_current_rxdesc->control_buffer_size & ENET_RDES1_RCHM)){ + dma_current_rxdesc = (enet_descriptors_struct*) (dma_current_ptp_rxdesc->buffer2_next_desc_addr); + /* if it is the last ptp descriptor */ + if(0U != dma_current_ptp_rxdesc->status){ + /* pointer back to the first ptp descriptor address in the desc_ptptab list address */ + dma_current_ptp_rxdesc = (enet_descriptors_struct*) (dma_current_ptp_rxdesc->status); + }else{ + /* ponter to the next ptp descriptor */ + dma_current_ptp_rxdesc++; + } + }else{ + /* ring mode */ + if((uint32_t)RESET != (dma_current_rxdesc->control_buffer_size & ENET_RDES1_RERM)){ + /* if is the last descriptor in table, the next descriptor is the table header */ + dma_current_rxdesc = (enet_descriptors_struct*) (ENET_DMA_RDTADDR); + /* RDES2 and RDES3 will not be covered by buffer address, so do not need to preserve a new table, + use the same table with RxDMA descriptor */ + dma_current_ptp_rxdesc = (enet_descriptors_struct*) (dma_current_ptp_rxdesc->status); + }else{ + /* the next descriptor is the current address, add the descriptor size, and descriptor skip length */ + dma_current_rxdesc = (enet_descriptors_struct*) (uint32_t)((uint32_t)dma_current_rxdesc + ETH_DMARXDESC_SIZE + GET_DMA_BCTL_DPSL(ENET_DMA_BCTL)); + dma_current_ptp_rxdesc ++; + } + } + + return SUCCESS; +} + +/*! + \brief send data with timestamp values in application buffer as a transmit packet, when the DMA is in normal mode + \param[in] buffer: pointer on the application buffer + note -- if the input is NULL, user should copy data in application by himself + \param[in] length: the length of frame data to be transmitted + \param[out] timestamp: pointer to the table which stores the timestamp high and low + note -- if the input is NULL, timestamp is ignored + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus enet_ptpframe_transmit_normal_mode(uint8_t *buffer, uint32_t length, uint32_t timestamp[]) +{ + uint32_t offset = 0U, timeout = 0U; + uint32_t dma_tbu_flag, dma_tu_flag, tdes0_ttmss_flag; + + /* the descriptor is busy due to own by the DMA */ + if((uint32_t)RESET != (dma_current_txdesc->status & ENET_TDES0_DAV)){ + return ERROR; + } + + /* only frame length no more than ENET_MAX_FRAME_SIZE is allowed */ + if(length > ENET_MAX_FRAME_SIZE){ + return ERROR; + } + + /* if buffer pointer is null, indicates that users has handled data in application */ + if(NULL != buffer){ + /* copy frame data from application buffer to Tx buffer */ + for(offset = 0U; offset < length; offset++){ + (*(__IO uint8_t *) (uint32_t)((dma_current_ptp_txdesc->buffer1_addr) + offset)) = (*(buffer + offset)); + } + } + /* set the frame length */ + dma_current_txdesc->control_buffer_size = (length & (uint32_t)0x1FFF); + /* set the segment of frame, frame is transmitted in one descriptor */ + dma_current_txdesc->status |= ENET_TDES0_LSG | ENET_TDES0_FSG; + /* enable the DMA transmission */ + dma_current_txdesc->status |= ENET_TDES0_DAV; + + /* check Tx buffer unavailable flag status */ + dma_tbu_flag = (ENET_DMA_STAT & ENET_DMA_STAT_TBU); + dma_tu_flag = (ENET_DMA_STAT & ENET_DMA_STAT_TU); + + if((RESET != dma_tbu_flag) || (RESET != dma_tu_flag)){ + /* clear TBU and TU flag */ + ENET_DMA_STAT = (dma_tbu_flag | dma_tu_flag); + /* resume DMA transmission by writing to the TPEN register*/ + ENET_DMA_TPEN = 0U; + } + + /* if timestamp pointer is null, indicates that users don't care timestamp in application */ + if(NULL != timestamp){ + /* wait for ENET_TDES0_TTMSS flag to be set, a timestamp was captured */ + do{ + tdes0_ttmss_flag = (dma_current_txdesc->status & ENET_TDES0_TTMSS); + timeout++; + }while((RESET == tdes0_ttmss_flag) && (timeout < ENET_DELAY_TO)); + + /* return ERROR due to timeout */ + if(ENET_DELAY_TO == timeout){ + return ERROR; + } + + /* clear the ENET_TDES0_TTMSS flag */ + dma_current_txdesc->status &= ~ENET_TDES0_TTMSS; + /* get the timestamp value of the transmit frame */ + timestamp[0] = dma_current_txdesc->buffer1_addr; + timestamp[1] = dma_current_txdesc->buffer2_next_desc_addr; + } + dma_current_txdesc->buffer1_addr = dma_current_ptp_txdesc ->buffer1_addr ; + dma_current_txdesc->buffer2_next_desc_addr = dma_current_ptp_txdesc ->buffer2_next_desc_addr; + + /* update the current TxDMA descriptor pointer to the next decriptor in TxDMA decriptor table */ + /* chained mode */ + if((uint32_t)RESET != (dma_current_txdesc->status & ENET_TDES0_TCHM)){ + dma_current_txdesc = (enet_descriptors_struct*) (dma_current_ptp_txdesc->buffer2_next_desc_addr); + /* if it is the last ptp descriptor */ + if(0U != dma_current_ptp_txdesc->status){ + /* pointer back to the first ptp descriptor address in the desc_ptptab list address */ + dma_current_ptp_txdesc = (enet_descriptors_struct*) (dma_current_ptp_txdesc->status); + }else{ + /* ponter to the next ptp descriptor */ + dma_current_ptp_txdesc++; + } + }else{ + /* ring mode */ + if((uint32_t)RESET != (dma_current_txdesc->status & ENET_TDES0_TERM)){ + /* if is the last descriptor in table, the next descriptor is the table header */ + dma_current_txdesc = (enet_descriptors_struct*) (ENET_DMA_TDTADDR); + /* TDES2 and TDES3 will not be covered by buffer address, so do not need to preserve a new table, + use the same table with TxDMA descriptor */ + dma_current_ptp_txdesc = (enet_descriptors_struct*) (dma_current_ptp_txdesc->status); + }else{ + /* the next descriptor is the current address, add the descriptor size, and descriptor skip length */ + dma_current_txdesc = (enet_descriptors_struct*) (uint32_t)((uint32_t)dma_current_txdesc + ETH_DMATXDESC_SIZE + GET_DMA_BCTL_DPSL(ENET_DMA_BCTL)); + dma_current_ptp_txdesc ++; + } + } + return SUCCESS; +} + +/*! + \brief wakeup frame filter register pointer reset + \param[in] none + \param[out] none + \retval none +*/ +void enet_wum_filter_register_pointer_reset(void) +{ + ENET_MAC_WUM |= ENET_MAC_WUM_WUFFRPR; +} + +/*! + \brief set the remote wakeup frame registers + \param[in] pdata: pointer to buffer data which is written to remote wakeup frame registers (8 words total) + \param[out] none + \retval none +*/ +void enet_wum_filter_config(uint32_t pdata[]) +{ + uint32_t num = 0U; + + /* configure ENET_MAC_RWFF register */ + for(num = 0U; num < ETH_WAKEUP_REGISTER_LENGTH; num++){ + ENET_MAC_RWFF = pdata[num]; + } +} + +/*! + \brief enable wakeup management features + \param[in] feature: one or more parameters can be selected which are shown as below + \arg ENET_WUM_POWER_DOWN: power down mode + \arg ENET_WUM_MAGIC_PACKET_FRAME: enable a wakeup event due to magic packet reception + \arg ENET_WUM_WAKE_UP_FRAME: enable a wakeup event due to wakeup frame reception + \arg ENET_WUM_GLOBAL_UNICAST: any received unicast frame passed filter is considered to be a wakeup frame + \param[out] none + \retval none +*/ +void enet_wum_feature_enable(uint32_t feature) +{ + ENET_MAC_WUM |= feature; +} + +/*! + \brief disable wakeup management features + \param[in] feature: one or more parameters can be selected which are shown as below + \arg ENET_WUM_MAGIC_PACKET_FRAME: enable a wakeup event due to magic packet reception + \arg ENET_WUM_WAKE_UP_FRAME: enable a wakeup event due to wakeup frame reception + \arg ENET_WUM_GLOBAL_UNICAST: any received unicast frame passed filter is considered to be a wakeup frame + \param[out] none + \retval none +*/ +void enet_wum_feature_disable(uint32_t feature) +{ + ENET_MAC_WUM &= (~feature); +} + +/*! + \brief reset the MAC statistics counters + \param[in] none + \param[out] none + \retval none +*/ +void enet_msc_counters_reset(void) +{ + /* reset all counters */ + ENET_MSC_CTL |= ENET_MSC_CTL_CTR; +} + +/*! + \brief enable the MAC statistics counter features + \param[in] feature: one or more parameters can be selected which are shown as below + \arg ENET_MSC_COUNTER_STOP_ROLLOVER: counter stop rollover + \arg ENET_MSC_RESET_ON_READ: reset on read + \arg ENET_MSC_COUNTERS_FREEZE: MSC counter freeze + \param[out] none + \retval none +*/ +void enet_msc_feature_enable(uint32_t feature) +{ + ENET_MSC_CTL |= feature; +} + +/*! + \brief disable the MAC statistics counter features + \param[in] feature: one or more parameters can be selected which are shown as below + \arg ENET_MSC_COUNTER_STOP_ROLLOVER: counter stop rollover + \arg ENET_MSC_RESET_ON_READ: reset on read + \arg ENET_MSC_COUNTERS_FREEZE: MSC counter freeze + \param[out] none + \retval none +*/ +void enet_msc_feature_disable(uint32_t feature) +{ + ENET_MSC_CTL &= (~feature); +} + +/*! + \brief get MAC statistics counter + \param[in] counter: MSC counters which is selected, refer to enet_msc_counter_enum, + only one parameter can be selected which is shown as below + \arg ENET_MSC_TX_SCCNT: MSC transmitted good frames after a single collision counter + \arg ENET_MSC_TX_MSCCNT: MSC transmitted good frames after more than a single collision counter + \arg ENET_MSC_TX_TGFCNT: MSC transmitted good frames counter + \arg ENET_MSC_RX_RFCECNT: MSC received frames with CRC error counter + \arg ENET_MSC_RX_RFAECNT: MSC received frames with alignment error counter + \arg ENET_MSC_RX_RGUFCNT: MSC received good unicast frames counter + \param[out] none + \retval the MSC counter value +*/ +uint32_t enet_msc_counters_get(enet_msc_counter_enum counter) +{ + uint32_t reval; + + reval = REG32((ENET + (uint32_t)counter)); + + return reval; +} + +/*! + \brief change subsecond to nanosecond + \param[in] subsecond: subsecond value + \param[out] none + \retval the nanosecond value +*/ +uint32_t enet_ptp_subsecond_2_nanosecond(uint32_t subsecond) +{ + uint64_t val = subsecond * 1000000000Ull; + val >>= 31; + return (uint32_t)val; +} + +/*! + \brief change nanosecond to subsecond + \param[in] nanosecond: nanosecond value + \param[out] none + \retval the subsecond value +*/ +uint32_t enet_ptp_nanosecond_2_subsecond(uint32_t nanosecond) +{ + uint64_t val = nanosecond * 0x80000000Ull; + val /= 1000000000U; + return (uint32_t)val; +} + +/*! + \brief enable the PTP features + \param[in] feature: the feature of ENET PTP mode + one or more parameters can be selected which are shown as below + \arg ENET_RXTX_TIMESTAMP: timestamp function for transmit and receive frames + \arg ENET_PTP_TIMESTAMP_INT: timestamp interrupt trigger + \param[out] none + \retval none +*/ +void enet_ptp_feature_enable(uint32_t feature) +{ + ENET_PTP_TSCTL |= feature; +} + +/*! + \brief disable the PTP features + \param[in] feature: the feature of ENET PTP mode + one or more parameters can be selected which are shown as below + \arg ENET_RXTX_TIMESTAMP: timestamp function for transmit and receive frames + \arg ENET_PTP_TIMESTAMP_INT: timestamp interrupt trigger + \param[out] none + \retval none +*/ +void enet_ptp_feature_disable(uint32_t feature) +{ + ENET_PTP_TSCTL &= ~feature; +} + +/*! + \brief configure the PTP timestamp function + \param[in] func: only one parameter can be selected which is shown as below + \arg ENET_PTP_ADDEND_UPDATE: addend register update + \arg ENET_PTP_SYSTIME_UPDATE: timestamp update + \arg ENET_PTP_SYSTIME_INIT: timestamp initialize + \arg ENET_PTP_FINEMODE: the system timestamp uses the fine method for updating + \arg ENET_PTP_COARSEMODE: the system timestamp uses the coarse method for updating + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ + +ErrStatus enet_ptp_timestamp_function_config(enet_ptp_function_enum func) +{ + uint32_t temp_config = 0U, temp_state = 0U; + uint32_t timeout = 0U; + ErrStatus enet_state = SUCCESS; + + switch(func){ + case ENET_PTP_ADDEND_UPDATE: + /* this bit must be read as zero before application set it */ + do{ + temp_state = ENET_PTP_TSCTL & ENET_PTP_TSCTL_TMSARU; + timeout++; + }while((RESET != temp_state) && (timeout < ENET_DELAY_TO)); + /* return ERROR due to timeout */ + if(ENET_DELAY_TO == timeout){ + enet_state = ERROR; + }else{ + ENET_PTP_TSCTL |= ENET_PTP_TSCTL_TMSARU; + } + break; + case ENET_PTP_SYSTIME_UPDATE: + /* both the TMSSTU and TMSSTI bits must be read as zero before application set this bit */ + do{ + temp_state = ENET_PTP_TSCTL & (ENET_PTP_TSCTL_TMSSTU | ENET_PTP_TSCTL_TMSSTI); + timeout++; + }while((RESET != temp_state) && (timeout < ENET_DELAY_TO)); + /* return ERROR due to timeout */ + if(ENET_DELAY_TO == timeout){ + enet_state = ERROR; + }else{ + ENET_PTP_TSCTL |= ENET_PTP_TSCTL_TMSSTU; + } + break; + case ENET_PTP_SYSTIME_INIT: + /* this bit must be read as zero before application set it */ + do{ + temp_state = ENET_PTP_TSCTL & ENET_PTP_TSCTL_TMSSTI; + timeout++; + }while((RESET != temp_state) && (timeout < ENET_DELAY_TO)); + /* return ERROR due to timeout */ + if(ENET_DELAY_TO == timeout){ + enet_state = ERROR; + }else{ + ENET_PTP_TSCTL |= ENET_PTP_TSCTL_TMSSTI; + } + break; + default: + temp_config = (uint32_t)func & (~BIT(31)); + if(RESET != ((uint32_t)func & BIT(31))){ + ENET_PTP_TSCTL |= temp_config; + }else{ + ENET_PTP_TSCTL &= ~temp_config; + } + break; + } + + return enet_state; +} + +/*! + \brief configure system time subsecond increment value + \param[in] subsecond: the value will be added to the subsecond value of system time, + this value must be between 0 and 0xFF + \param[out] none + \retval none +*/ +void enet_ptp_subsecond_increment_config(uint32_t subsecond) +{ + ENET_PTP_SSINC = PTP_SSINC_STMSSI(subsecond); +} + +/*! + \brief adjusting the clock frequency only in fine update mode + \param[in] add: the value will be added to the accumulator register to achieve time synchronization + \param[out] none + \retval none +*/ +void enet_ptp_timestamp_addend_config(uint32_t add) +{ + ENET_PTP_TSADDEND = add; +} + +/*! + \brief initialize or add/subtract to second of the system time + \param[in] sign: timestamp update positive or negative sign, + only one parameter can be selected which is shown as below + \arg ENET_PTP_ADD_TO_TIME: timestamp update value is added to system time + \arg ENET_PTP_SUBSTRACT_FROM_TIME: timestamp update value is subtracted from system time + \param[in] second: initializing or adding/subtracting to second of the system time + \param[in] subsecond: the current subsecond of the system time + with 0.46 ns accuracy if required accuracy is 20 ns + \param[out] none + \retval none +*/ +void enet_ptp_timestamp_update_config(uint32_t sign, uint32_t second, uint32_t subsecond) +{ + ENET_PTP_TSUH = second; + ENET_PTP_TSUL = sign | PTP_TSUL_TMSUSS(subsecond); +} + +/*! + \brief configure the expected target time + \param[in] second: the expected target second time + \param[in] nanosecond: the expected target nanosecond time (signed) + \param[out] none + \retval none +*/ +void enet_ptp_expected_time_config(uint32_t second, uint32_t nanosecond) +{ + ENET_PTP_ETH = second; + ENET_PTP_ETL = nanosecond; +} + +/*! + \brief get the current system time + \param[in] none + \param[out] systime_struct: pointer to a enet_ptp_systime_struct structure which contains + parameters of PTP system time + members of the structure and the member values are shown as below: + second: 0x0 - 0xFFFF FFFF + nanosecond: 0x0 - 0x7FFF FFFF * 10^9 / 2^31 + sign: ENET_PTP_TIME_POSITIVE, ENET_PTP_TIME_NEGATIVE + \retval none +*/ +void enet_ptp_system_time_get(enet_ptp_systime_struct *systime_struct) +{ + uint32_t temp_sec = 0U, temp_subs = 0U; + + /* get the value of sysytem time registers */ + temp_sec = (uint32_t)ENET_PTP_TSH; + temp_subs = (uint32_t)ENET_PTP_TSL; + + /* get sysytem time and construct the enet_ptp_systime_struct structure */ + systime_struct->second = temp_sec; + systime_struct->nanosecond = GET_PTP_TSL_STMSS(temp_subs); + systime_struct->nanosecond = enet_ptp_subsecond_2_nanosecond(systime_struct->nanosecond); + systime_struct->sign = GET_PTP_TSL_STS(temp_subs); +} + +/*! + \brief configure and start PTP timestamp counter + \param[in] updatemethod: method for updating + \arg ENET_PTP_FINEMODE: fine correction method + \arg ENET_PTP_COARSEMODE: coarse correction method + \param[in] init_sec: second value for initializing system time + \param[in] init_subsec: subsecond value for initializing system time + \param[in] carry_cfg: the value to be added to the accumulator register (in fine method is used) + \param[in] accuracy_cfg: the value to be added to the subsecond value of system time + \param[out] none + \retval none +*/ +void enet_ptp_start(int32_t updatemethod, uint32_t init_sec, uint32_t init_subsec, uint32_t carry_cfg, uint32_t accuracy_cfg) +{ + /* mask the timestamp trigger interrupt */ + enet_interrupt_disable(ENET_MAC_INT_TMSTIM); + + /* enable timestamp */ + enet_ptp_feature_enable(ENET_RXTX_TIMESTAMP); + + /* configure system time subsecond increment based on the PTP clock frequency */ + enet_ptp_subsecond_increment_config(accuracy_cfg); + + if(ENET_PTP_FINEMODE == updatemethod){ + /* fine correction method: configure the timestamp addend, then update */ + enet_ptp_timestamp_addend_config(carry_cfg); + enet_ptp_timestamp_function_config(ENET_PTP_ADDEND_UPDATE); + /* wait until update is completed */ + while(SET == enet_ptp_flag_get((uint32_t)ENET_PTP_ADDEND_UPDATE)){ + } + } + + /* choose the fine correction method */ + enet_ptp_timestamp_function_config((enet_ptp_function_enum)updatemethod); + + /* initialize the system time */ + enet_ptp_timestamp_update_config(ENET_PTP_ADD_TO_TIME, init_sec, init_subsec); + enet_ptp_timestamp_function_config(ENET_PTP_SYSTIME_INIT); +} + +/*! + \brief adjust frequency in fine method by configure addend register + \param[in] carry_cfg: the value to be added to the accumulator register + \param[out] none + \retval none +*/ +void enet_ptp_finecorrection_adjfreq(int32_t carry_cfg) +{ + /* re-configure the timestamp addend, then update */ + enet_ptp_timestamp_addend_config((uint32_t)carry_cfg); + enet_ptp_timestamp_function_config(ENET_PTP_ADDEND_UPDATE); +} + +/*! + \brief update system time in coarse method + \param[in] systime_struct: pointer to a enet_ptp_systime_struct structure which contains + parameters of PTP system time + members of the structure and the member values are shown as below: + second: 0x0 - 0xFFFF FFFF + nanosecond: 0x0 - 0x7FFF FFFF * 10^9 / 2^31 + sign: ENET_PTP_TIME_POSITIVE, ENET_PTP_TIME_NEGATIVE + \param[out] none + \retval none +*/ +void enet_ptp_coarsecorrection_systime_update(enet_ptp_systime_struct *systime_struct) +{ + uint32_t subsecond_val; + uint32_t carry_cfg; + + subsecond_val = enet_ptp_nanosecond_2_subsecond(systime_struct->nanosecond); + + /* save the carry_cfg value */ + carry_cfg = ENET_PTP_TSADDEND_TMSA; + + /* update the system time */ + enet_ptp_timestamp_update_config(systime_struct->sign, systime_struct->second, subsecond_val); + enet_ptp_timestamp_function_config(ENET_PTP_SYSTIME_UPDATE); + + /* wait until the update is completed */ + while(SET == enet_ptp_flag_get((uint32_t)ENET_PTP_SYSTIME_UPDATE)){ + } + + /* write back the carry_cfg value, then update */ + enet_ptp_timestamp_addend_config(carry_cfg); + enet_ptp_timestamp_function_config(ENET_PTP_ADDEND_UPDATE); +} + +/*! + \brief set system time in fine method + \param[in] systime_struct: pointer to a enet_ptp_systime_struct structure which contains + parameters of PTP system time + members of the structure and the member values are shown as below: + second: 0x0 - 0xFFFF FFFF + nanosecond: 0x0 - 0x7FFF FFFF * 10^9 / 2^31 + sign: ENET_PTP_TIME_POSITIVE, ENET_PTP_TIME_NEGATIVE + \param[out] none + \retval none +*/ +void enet_ptp_finecorrection_settime(enet_ptp_systime_struct * systime_struct) +{ + uint32_t subsecond_val; + + subsecond_val = enet_ptp_nanosecond_2_subsecond(systime_struct->nanosecond); + + /* initialize the system time */ + enet_ptp_timestamp_update_config(systime_struct->sign, systime_struct->second, subsecond_val); + enet_ptp_timestamp_function_config(ENET_PTP_SYSTIME_INIT); + + /* wait until the system time initialzation finished */ + while(SET == enet_ptp_flag_get((uint32_t)ENET_PTP_SYSTIME_INIT)){ + } +} + +/*! + \brief get the ptp flag status + \param[in] flag: ptp flag status to be checked + \arg ENET_PTP_ADDEND_UPDATE: addend register update + \arg ENET_PTP_SYSTIME_UPDATE: timestamp update + \arg ENET_PTP_SYSTIME_INIT: timestamp initialize + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus enet_ptp_flag_get(uint32_t flag) +{ + FlagStatus bitstatus = RESET; + + if ((uint32_t)RESET != (ENET_PTP_TSCTL & flag)){ + bitstatus = SET; + } + + return bitstatus; +} + +/*! + \brief reset the ENET initpara struct, call it before using enet_initpara_config() + \param[in] none + \param[out] none + \retval none +*/ +void enet_initpara_reset(void) +{ + enet_initpara.option_enable = 0U; + enet_initpara.forward_frame = 0U; + enet_initpara.dmabus_mode = 0U; + enet_initpara.dma_maxburst = 0U; + enet_initpara.dma_arbitration = 0U; + enet_initpara.store_forward_mode = 0U; + enet_initpara.dma_function = 0U; + enet_initpara.vlan_config = 0U; + enet_initpara.flow_control = 0U; + enet_initpara.hashtable_high = 0U; + enet_initpara.hashtable_low = 0U; + enet_initpara.framesfilter_mode = 0U; + enet_initpara.halfduplex_param = 0U; + enet_initpara.timer_config = 0U; + enet_initpara.interframegap = 0U; +} + +/*! + \brief initialize ENET peripheral with generally concerned parameters, call it by enet_init() + \param[in] none + \param[out] none + \retval none +*/ +static void enet_default_init(void) +{ + uint32_t reg_value = 0U; + + /* MAC */ + /* configure ENET_MAC_CFG register */ + reg_value = ENET_MAC_CFG; + reg_value &= MAC_CFG_MASK; + reg_value |= ENET_WATCHDOG_ENABLE | ENET_JABBER_ENABLE | ENET_INTERFRAMEGAP_96BIT \ + | ENET_SPEEDMODE_10M |ENET_MODE_HALFDUPLEX | ENET_LOOPBACKMODE_DISABLE \ + | ENET_CARRIERSENSE_ENABLE | ENET_RECEIVEOWN_ENABLE \ + | ENET_RETRYTRANSMISSION_ENABLE | ENET_BACKOFFLIMIT_10 \ + | ENET_DEFERRALCHECK_DISABLE \ + | ENET_AUTO_PADCRC_DROP_DISABLE \ + | ENET_CHECKSUMOFFLOAD_DISABLE; + ENET_MAC_CFG = reg_value; + + /* configure ENET_MAC_FRMF register */ + ENET_MAC_FRMF = ENET_SRC_FILTER_DISABLE |ENET_DEST_FILTER_INVERSE_DISABLE \ + |ENET_MULTICAST_FILTER_PERFECT |ENET_UNICAST_FILTER_PERFECT \ + |ENET_PCFRM_PREVENT_ALL |ENET_BROADCASTFRAMES_ENABLE \ + |ENET_PROMISCUOUS_DISABLE |ENET_RX_FILTER_ENABLE; + + /* configure ENET_MAC_HLH, ENET_MAC_HLL register */ + ENET_MAC_HLH = 0x0U; + + ENET_MAC_HLL = 0x0U; + + /* configure ENET_MAC_FCTL, ENET_MAC_FCTH register */ + reg_value = ENET_MAC_FCTL; + reg_value &= MAC_FCTL_MASK; + reg_value |= MAC_FCTL_PTM(0) |ENET_ZERO_QUANTA_PAUSE_DISABLE \ + |ENET_PAUSETIME_MINUS4 |ENET_UNIQUE_PAUSEDETECT \ + |ENET_RX_FLOWCONTROL_DISABLE |ENET_TX_FLOWCONTROL_DISABLE; + ENET_MAC_FCTL = reg_value; + + ENET_MAC_FCTH = ENET_DEACTIVE_THRESHOLD_512BYTES |ENET_ACTIVE_THRESHOLD_1536BYTES; + + /* configure ENET_MAC_VLT register */ + ENET_MAC_VLT = ENET_VLANTAGCOMPARISON_16BIT |MAC_VLT_VLTI(0); + + /* DMA */ + /* configure ENET_DMA_CTL register */ + reg_value = ENET_DMA_CTL; + reg_value &= DMA_CTL_MASK; + reg_value |= ENET_TCPIP_CKSUMERROR_DROP |ENET_RX_MODE_STOREFORWARD \ + |ENET_FLUSH_RXFRAME_ENABLE |ENET_TX_MODE_STOREFORWARD \ + |ENET_TX_THRESHOLD_64BYTES |ENET_RX_THRESHOLD_64BYTES \ + |ENET_FORWARD_ERRFRAMES_DISABLE |ENET_FORWARD_UNDERSZ_GOODFRAMES_DISABLE \ + |ENET_SECONDFRAME_OPT_DISABLE; + ENET_DMA_CTL = reg_value; + + /* configure ENET_DMA_BCTL register */ + reg_value = ENET_DMA_BCTL; + reg_value &= DMA_BCTL_MASK; + reg_value = ENET_ADDRESS_ALIGN_ENABLE |ENET_ARBITRATION_RXTX_2_1 \ + |ENET_RXDP_32BEAT |ENET_PGBL_32BEAT |ENET_RXTX_DIFFERENT_PGBL \ + |ENET_FIXED_BURST_ENABLE; + ENET_DMA_BCTL = reg_value; +} + +#ifndef USE_DELAY +/*! + \brief insert a delay time + \param[in] ncount: specifies the delay time length + \param[out] none + \param[out] none +*/ +static void enet_delay(uint32_t ncount) +{ + uint32_t delay_time = 0U; + + for(delay_time = ncount; delay_time != 0U; delay_time--){ + } +} +#endif /* USE_DELAY */ + +#endif /* GD32F10X_CL */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_exmc.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_exmc.c new file mode 100644 index 0000000000000000000000000000000000000000..641e716ca1cbf4d2bc1b861632f11b23c2a35068 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_exmc.c @@ -0,0 +1,646 @@ +/*! + \file gd32f10x_exmc.c + \brief EXMC driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_exmc.h" + +/* EXMC bank0 register reset value */ +#define BANK0_SNCTL0_REGION_RESET ((uint32_t)0x000030DBU) +#define BANK0_SNCTL1_2_3_REGION_RESET ((uint32_t)0x000030D2U) +#define BANK0_SNTCFG_RESET ((uint32_t)0x0FFFFFFFU) +#define BANK0_SNWTCFG_RESET ((uint32_t)0x0FFFFFFFU) + +/* EXMC bank1/2 register reset mask*/ +#define BANK1_2_NPCTL_RESET ((uint32_t)0x00000018U) +#define BANK1_2_NPINTEN_RESET ((uint32_t)0x00000040U) +#define BANK1_2_NPCTCFG_RESET ((uint32_t)0xFCFCFCFCU) +#define BANK1_2_NPATCFG_RESET ((uint32_t)0xFCFCFCFCU) + +/* EXMC bank3 register reset mask*/ +#define BANK3_NPCTL_RESET ((uint32_t)0x00000018U) +#define BANK3_NPINTEN_RESET ((uint32_t)0x00000040U) +#define BANK3_NPCTCFG_RESET ((uint32_t)0xFCFCFCFCU) +#define BANK3_NPATCFG_RESET ((uint32_t)0xFCFCFCFCU) +#define BANK3_PIOTCFG3_RESET ((uint32_t)0xFCFCFCFCU) + +/* EXMC register bit offset */ +#define SNCTL_NRMUX_OFFSET ((uint32_t)1U) +#define SNCTL_SBRSTEN_OFFSET ((uint32_t)8U) +#define SNCTL_WRAPEN_OFFSET ((uint32_t)10U) +#define SNCTL_WREN_OFFSET ((uint32_t)12U) +#define SNCTL_NRWTEN_OFFSET ((uint32_t)13U) +#define SNCTL_EXMODEN_OFFSET ((uint32_t)14U) +#define SNCTL_ASYNCWAIT_OFFSET ((uint32_t)15U) + +#define SNTCFG_AHLD_OFFSET ((uint32_t)4U) +#define SNTCFG_DSET_OFFSET ((uint32_t)8U) +#define SNTCFG_BUSLAT_OFFSET ((uint32_t)16U) + +#define SNWTCFG_WAHLD_OFFSET ((uint32_t)4U) +#define SNWTCFG_WDSET_OFFSET ((uint32_t)8U) +#define SNWTCFG_WBUSLAT_OFFSET ((uint32_t)16U) + +#define NPCTL_NDWTEN_OFFSET ((uint32_t)1U) +#define NPCTL_ECCEN_OFFSET ((uint32_t)6U) + +#define NPCTCFG_COMWAIT_OFFSET ((uint32_t)8U) +#define NPCTCFG_COMHLD_OFFSET ((uint32_t)16U) +#define NPCTCFG_COMHIZ_OFFSET ((uint32_t)24U) + +#define NPATCFG_ATTWAIT_OFFSET ((uint32_t)8U) +#define NPATCFG_ATTHLD_OFFSET ((uint32_t)16U) +#define NPATCFG_ATTHIZ_OFFSET ((uint32_t)24U) + +#define PIOTCFG_IOWAIT_OFFSET ((uint32_t)8U) +#define PIOTCFG_IOHLD_OFFSET ((uint32_t)16U) +#define PIOTCFG_IOHIZ_OFFSET ((uint32_t)24U) + +#define INTEN_INTS_OFFSET ((uint32_t)3U) + +/*! + \brief deinitialize EXMC NOR/SRAM region + \param[in] norsram_region: select the region of bank0 + \arg EXMC_BANK0_NORSRAM_REGIONx(x=0..3) + \param[out] none + \retval none +*/ +void exmc_norsram_deinit(uint32_t norsram_region) +{ + /* reset the registers */ + if(EXMC_BANK0_NORSRAM_REGION0 == norsram_region){ + EXMC_SNCTL(norsram_region) = BANK0_SNCTL0_REGION_RESET; + }else{ + EXMC_SNCTL(norsram_region) = BANK0_SNCTL1_2_3_REGION_RESET; + } + + EXMC_SNTCFG(norsram_region) = BANK0_SNTCFG_RESET; + EXMC_SNWTCFG(norsram_region) = BANK0_SNWTCFG_RESET; +} + +/*! + \brief initialize EXMC NOR/SRAM region + \param[in] exmc_norsram_parameter_struct: configure the EXMC NOR/SRAM parameter + norsram_region: EXMC_BANK0_NORSRAM_REGIONx,x=0..3 + write_mode: EXMC_ASYN_WRITE,EXMC_SYN_WRITE + extended_mode: ENABLE or DISABLE + asyn_wait: ENABLE or DISABLE + nwait_signal: ENABLE or DISABLE + memory_write: ENABLE or DISABLE + nwait_config: EXMC_NWAIT_CONFIG_BEFORE,EXMC_NWAIT_CONFIG_DURING + wrap_burst_mode: ENABLE or DISABLE + nwait_polarity: EXMC_NWAIT_POLARITY_LOW,EXMC_NWAIT_POLARITY_HIGH + burst_mode: ENABLE or DISABLE + databus_width: EXMC_NOR_DATABUS_WIDTH_8B,EXMC_NOR_DATABUS_WIDTH_16B + memory_type: EXMC_MEMORY_TYPE_SRAM,EXMC_MEMORY_TYPE_PSRAM,EXMC_MEMORY_TYPE_NOR + address_data_mux: ENABLE or DISABLE + read_write_timing: struct exmc_norsram_timing_parameter_struct set the time + write_timing: struct exmc_norsram_timing_parameter_struct set the time + \param[out] none + \retval none +*/ +void exmc_norsram_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct) +{ + uint32_t snctl = 0x00000000U, sntcfg = 0x00000000U, snwtcfg = 0x00000000U; + + /* get the register value */ + snctl = EXMC_SNCTL(exmc_norsram_init_struct->norsram_region); + + /* clear relative bits */ + snctl &= ((uint32_t)~(EXMC_SNCTL_NREN | EXMC_SNCTL_NRTP | EXMC_SNCTL_NRW | EXMC_SNCTL_SBRSTEN | + EXMC_SNCTL_NRWTPOL | EXMC_SNCTL_WRAPEN | EXMC_SNCTL_NRWTCFG | EXMC_SNCTL_WREN | + EXMC_SNCTL_NRWTEN | EXMC_SNCTL_EXMODEN | EXMC_SNCTL_ASYNCWAIT | EXMC_SNCTL_SYNCWR | + EXMC_SNCTL_NRMUX )); + + snctl |= (uint32_t)(exmc_norsram_init_struct->address_data_mux << SNCTL_NRMUX_OFFSET) | + exmc_norsram_init_struct->memory_type | + exmc_norsram_init_struct->databus_width | + (exmc_norsram_init_struct->burst_mode << SNCTL_SBRSTEN_OFFSET) | + exmc_norsram_init_struct->nwait_polarity | + (exmc_norsram_init_struct->wrap_burst_mode << SNCTL_WRAPEN_OFFSET) | + exmc_norsram_init_struct->nwait_config | + (exmc_norsram_init_struct->memory_write << SNCTL_WREN_OFFSET) | + (exmc_norsram_init_struct->nwait_signal << SNCTL_NRWTEN_OFFSET) | + (exmc_norsram_init_struct->extended_mode << SNCTL_EXMODEN_OFFSET) | + (exmc_norsram_init_struct->asyn_wait << SNCTL_ASYNCWAIT_OFFSET) | + exmc_norsram_init_struct->write_mode; + + sntcfg = (uint32_t)((exmc_norsram_init_struct->read_write_timing->asyn_address_setuptime - 1U ) & EXMC_SNTCFG_ASET )| + (((exmc_norsram_init_struct->read_write_timing->asyn_address_holdtime - 1U ) << SNTCFG_AHLD_OFFSET ) & EXMC_SNTCFG_AHLD ) | + (((exmc_norsram_init_struct->read_write_timing->asyn_data_setuptime - 1U ) << SNTCFG_DSET_OFFSET ) & EXMC_SNTCFG_DSET ) | + (((exmc_norsram_init_struct->read_write_timing->bus_latency - 1U ) << SNTCFG_BUSLAT_OFFSET ) & EXMC_SNTCFG_BUSLAT )| + exmc_norsram_init_struct->read_write_timing->syn_clk_division | + exmc_norsram_init_struct->read_write_timing->syn_data_latency | + exmc_norsram_init_struct->read_write_timing->asyn_access_mode; + + /* nor flash access enable */ + if(EXMC_MEMORY_TYPE_NOR == exmc_norsram_init_struct->memory_type){ + snctl |= (uint32_t)EXMC_SNCTL_NREN; + } + + /* extended mode configure */ + if(ENABLE == exmc_norsram_init_struct->extended_mode){ + snwtcfg = (uint32_t)(((exmc_norsram_init_struct->write_timing->asyn_address_setuptime - 1U) & EXMC_SNWTCFG_WASET) | + (((exmc_norsram_init_struct->write_timing->asyn_address_holdtime - 1U) << SNTCFG_AHLD_OFFSET ) & EXMC_SNWTCFG_WAHLD)| + (((exmc_norsram_init_struct->write_timing->asyn_data_setuptime - 1U) << SNTCFG_DSET_OFFSET) & EXMC_SNWTCFG_WDSET) | + exmc_norsram_init_struct->write_timing->asyn_access_mode); + }else{ + snwtcfg = BANK0_SNWTCFG_RESET; + } + + /* configure the registers */ + EXMC_SNCTL(exmc_norsram_init_struct->norsram_region) = snctl; + EXMC_SNTCFG(exmc_norsram_init_struct->norsram_region) = sntcfg; + EXMC_SNWTCFG(exmc_norsram_init_struct->norsram_region) = snwtcfg; +} + +/*! + \brief initialize the struct exmc_norsram_parameter_struct + \param[in] none + \param[out] exmc_norsram_init_struct: the initialized struct exmc_norsram_parameter_struct pointer + \retval none +*/ +void exmc_norsram_struct_para_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct) +{ + /* configure the structure with default value */ + exmc_norsram_init_struct->norsram_region = EXMC_BANK0_NORSRAM_REGION0; + exmc_norsram_init_struct->address_data_mux = ENABLE; + exmc_norsram_init_struct->memory_type = EXMC_MEMORY_TYPE_SRAM; + exmc_norsram_init_struct->databus_width = EXMC_NOR_DATABUS_WIDTH_8B; + exmc_norsram_init_struct->burst_mode = DISABLE; + exmc_norsram_init_struct->nwait_polarity = EXMC_NWAIT_POLARITY_LOW; + exmc_norsram_init_struct->wrap_burst_mode = DISABLE; + exmc_norsram_init_struct->nwait_config = EXMC_NWAIT_CONFIG_BEFORE; + exmc_norsram_init_struct->memory_write = ENABLE; + exmc_norsram_init_struct->nwait_signal = ENABLE; + exmc_norsram_init_struct->extended_mode = DISABLE; + exmc_norsram_init_struct->asyn_wait = DISABLE; + exmc_norsram_init_struct->write_mode = EXMC_ASYN_WRITE; + + /* read/write timing configure */ + exmc_norsram_init_struct->read_write_timing->asyn_address_setuptime = 0xFU; + exmc_norsram_init_struct->read_write_timing->asyn_address_holdtime = 0xFU; + exmc_norsram_init_struct->read_write_timing->asyn_data_setuptime = 0xFFU; + exmc_norsram_init_struct->read_write_timing->bus_latency = 0xFU; + exmc_norsram_init_struct->read_write_timing->syn_clk_division = EXMC_SYN_CLOCK_RATIO_16_CLK; + exmc_norsram_init_struct->read_write_timing->syn_data_latency = EXMC_DATALAT_17_CLK; + exmc_norsram_init_struct->read_write_timing->asyn_access_mode = EXMC_ACCESS_MODE_A; + + /* write timing configure, when extended mode is used */ + exmc_norsram_init_struct->write_timing->asyn_address_setuptime = 0xFU; + exmc_norsram_init_struct->write_timing->asyn_address_holdtime = 0xFU; + exmc_norsram_init_struct->write_timing->asyn_data_setuptime = 0xFFU; + exmc_norsram_init_struct->write_timing->bus_latency = 0xFU; + exmc_norsram_init_struct->write_timing->asyn_access_mode = EXMC_ACCESS_MODE_A; +} + +/*! + \brief enable EXMC NOR/PSRAM bank region + \param[in] norsram_region: specifie the region of NOR/PSRAM bank + \arg EXMC_BANK0_NORSRAM_REGIONx(x=0..3) + \param[out] none + \retval none +*/ +void exmc_norsram_enable(uint32_t norsram_region) +{ + EXMC_SNCTL(norsram_region) |= (uint32_t)EXMC_SNCTL_NRBKEN; +} + +/*! + \brief disable EXMC NOR/PSRAM bank region + \param[in] norsram_region: specifie the region of NOR/PSRAM Bank + \arg EXMC_BANK0_NORSRAM_REGIONx(x=0..3) + \param[out] none + \retval none +*/ +void exmc_norsram_disable(uint32_t norsram_region) +{ + EXMC_SNCTL(norsram_region) &= ~(uint32_t)EXMC_SNCTL_NRBKEN; +} + +/*! + \brief deinitialize EXMC NAND bank + \param[in] nand_bank: select the bank of NAND + \arg EXMC_BANKx_NAND(x=1..2) + \param[out] none + \retval none +*/ +void exmc_nand_deinit(uint32_t nand_bank) +{ + /* EXMC_BANK1_NAND or EXMC_BANK2_NAND */ + EXMC_NPCTL(nand_bank) = BANK1_2_NPCTL_RESET; + EXMC_NPINTEN(nand_bank) = BANK1_2_NPINTEN_RESET; + EXMC_NPCTCFG(nand_bank) = BANK1_2_NPCTCFG_RESET; + EXMC_NPATCFG(nand_bank) = BANK1_2_NPATCFG_RESET; +} + +/*! + \brief initialize EXMC NAND bank + \param[in] exmc_nand_parameter_struct: configure the EXMC NAND parameter + nand_bank: EXMC_BANK1_NAND,EXMC_BANK2_NAND + ecc_size: EXMC_ECC_SIZE_xBYTES,x=256,512,1024,2048,4096 + atr_latency: EXMC_ALE_RE_DELAY_x_HCLK,x=1..16 + ctr_latency: EXMC_CLE_RE_DELAY_x_HCLK,x=1..16 + ecc_logic: ENABLE or DISABLE + databus_width: EXMC_NAND_DATABUS_WIDTH_8B,EXMC_NAND_DATABUS_WIDTH_16B + wait_feature: ENABLE or DISABLE + common_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time + attribute_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time + \param[out] none + \retval none +*/ +void exmc_nand_init(exmc_nand_parameter_struct* exmc_nand_init_struct) +{ + uint32_t npctl = 0x00000000U, npctcfg = 0x00000000U, npatcfg = 0x00000000U; + + npctl = (uint32_t)(exmc_nand_init_struct->wait_feature << NPCTL_NDWTEN_OFFSET)| + EXMC_NPCTL_NDTP | + exmc_nand_init_struct->databus_width | + (exmc_nand_init_struct->ecc_logic << NPCTL_ECCEN_OFFSET)| + exmc_nand_init_struct->ecc_size | + exmc_nand_init_struct->ctr_latency | + exmc_nand_init_struct->atr_latency; + + npctcfg = (uint32_t)((exmc_nand_init_struct->common_space_timing->setuptime - 1U) & EXMC_NPCTCFG_COMSET ) | + (((exmc_nand_init_struct->common_space_timing->waittime - 1U) << NPCTCFG_COMWAIT_OFFSET) & EXMC_NPCTCFG_COMWAIT ) | + ((exmc_nand_init_struct->common_space_timing->holdtime << NPCTCFG_COMHLD_OFFSET) & EXMC_NPCTCFG_COMHLD ) | + (((exmc_nand_init_struct->common_space_timing->databus_hiztime - 1U) << NPCTCFG_COMHIZ_OFFSET) & EXMC_NPCTCFG_COMHIZ ); + + npatcfg = (uint32_t)((exmc_nand_init_struct->attribute_space_timing->setuptime - 1U) & EXMC_NPATCFG_ATTSET ) | + (((exmc_nand_init_struct->attribute_space_timing->waittime - 1U) << NPATCFG_ATTWAIT_OFFSET) & EXMC_NPATCFG_ATTWAIT ) | + ((exmc_nand_init_struct->attribute_space_timing->holdtime << NPATCFG_ATTHLD_OFFSET) & EXMC_NPATCFG_ATTHLD ) | + (((exmc_nand_init_struct->attribute_space_timing->databus_hiztime -1U) << NPATCFG_ATTHIZ_OFFSET) & EXMC_NPATCFG_ATTHIZ ); + + /* EXMC_BANK1_NAND or EXMC_BANK2_NAND initialize */ + EXMC_NPCTL(exmc_nand_init_struct->nand_bank) = npctl; + EXMC_NPCTCFG(exmc_nand_init_struct->nand_bank) = npctcfg; + EXMC_NPATCFG(exmc_nand_init_struct->nand_bank) = npatcfg; +} + +/*! + \brief initialize the struct exmc_nand_init_struct + \param[in] none + \param[out] the initialized struct exmc_nand_init_struct pointer + \retval none +*/ +void exmc_nand_struct_para_init(exmc_nand_parameter_struct* exmc_nand_init_struct) +{ + /* configure the structure with default value */ + exmc_nand_init_struct->nand_bank = EXMC_BANK1_NAND; + exmc_nand_init_struct->wait_feature = DISABLE; + exmc_nand_init_struct->databus_width = EXMC_NAND_DATABUS_WIDTH_8B; + exmc_nand_init_struct->ecc_logic = DISABLE; + exmc_nand_init_struct->ecc_size = EXMC_ECC_SIZE_256BYTES; + exmc_nand_init_struct->ctr_latency = 0x0U; + exmc_nand_init_struct->atr_latency = 0x0U; + exmc_nand_init_struct->common_space_timing->setuptime = 0xFCU; + exmc_nand_init_struct->common_space_timing->waittime = 0xFCU; + exmc_nand_init_struct->common_space_timing->holdtime = 0xFCU; + exmc_nand_init_struct->common_space_timing->databus_hiztime = 0xFCU; + exmc_nand_init_struct->attribute_space_timing->setuptime = 0xFCU; + exmc_nand_init_struct->attribute_space_timing->waittime = 0xFCU; + exmc_nand_init_struct->attribute_space_timing->holdtime = 0xFCU; + exmc_nand_init_struct->attribute_space_timing->databus_hiztime = 0xFCU; +} + +/*! + \brief enable NAND bank + \param[in] nand_bank: specifie the NAND bank + \arg EXMC_BANKx_NAND(x=1,2) + \param[out] none + \retval none +*/ +void exmc_nand_enable(uint32_t nand_bank) +{ + EXMC_NPCTL(nand_bank) |= EXMC_NPCTL_NDBKEN; +} + +/*! + \brief disable NAND bank + \param[in] nand_bank: specifie the NAND bank + \arg EXMC_BANKx_NAND(x=1,2) + \param[out] none + \retval none +*/ +void exmc_nand_disable(uint32_t nand_bank) +{ + EXMC_NPCTL(nand_bank) &= ~EXMC_NPCTL_NDBKEN; +} + +/*! + \brief enable or disable the EXMC NAND ECC function + \param[in] nand_bank: specifie the NAND bank + \arg EXMC_BANKx_NAND(x=1,2) + \param[in] newvalue: ENABLE or DISABLE + \param[out] none + \retval none +*/ +void exmc_nand_ecc_config(uint32_t nand_bank, ControlStatus newvalue) +{ + if (ENABLE == newvalue){ + /* enable the selected NAND bank ECC function */ + EXMC_NPCTL(nand_bank) |= EXMC_NPCTL_ECCEN; + }else{ + /* disable the selected NAND bank ECC function */ + EXMC_NPCTL(nand_bank) &= ~EXMC_NPCTL_ECCEN; + } +} + +/*! + \brief get the EXMC ECC value + \param[in] nand_bank: specifie the NAND bank + \arg EXMC_BANKx_NAND(x=1,2) + \param[out] none + \retval the error correction code(ECC) value +*/ +uint32_t exmc_ecc_get(uint32_t nand_bank) +{ + return (EXMC_NECC(nand_bank)); +} + +/*! + \brief deinitialize EXMC PC card bank + \param[in] none + \param[out] none + \retval none +*/ +void exmc_pccard_deinit(void) +{ + /* EXMC_BANK3_PCCARD */ + EXMC_NPCTL3 = BANK3_NPCTL_RESET; + EXMC_NPINTEN3 = BANK3_NPINTEN_RESET; + EXMC_NPCTCFG3 = BANK3_NPCTCFG_RESET; + EXMC_NPATCFG3 = BANK3_NPATCFG_RESET; + EXMC_PIOTCFG3 = BANK3_PIOTCFG3_RESET; +} + +/*! + \brief initialize EXMC PC card bank + \param[in] exmc_pccard_parameter_struct: configure the EXMC NAND parameter + atr_latency: EXMC_ALE_RE_DELAY_x_HCLK,x=1..16 + ctr_latency: EXMC_CLE_RE_DELAY_x_HCLK,x=1..16 + wait_feature: ENABLE or DISABLE + common_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time + attribute_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time + io_space_timing: exmc_nand_pccard_timing_parameter_struct set the time + \param[out] none + \retval none +*/ +void exmc_pccard_init(exmc_pccard_parameter_struct* exmc_pccard_init_struct) +{ + /* configure the EXMC bank3 PC card control register */ + EXMC_NPCTL3 = (uint32_t)(exmc_pccard_init_struct->wait_feature << NPCTL_NDWTEN_OFFSET) | + EXMC_NAND_DATABUS_WIDTH_16B | + exmc_pccard_init_struct->ctr_latency | + exmc_pccard_init_struct->atr_latency ; + + /* configure the EXMC bank3 PC card common space timing configuration register */ + EXMC_NPCTCFG3 = (uint32_t)((exmc_pccard_init_struct->common_space_timing->setuptime - 1U)& EXMC_NPCTCFG_COMSET ) | + (((exmc_pccard_init_struct->common_space_timing->waittime - 1U) << NPCTCFG_COMWAIT_OFFSET) & EXMC_NPCTCFG_COMWAIT ) | + ((exmc_pccard_init_struct->common_space_timing->holdtime << NPCTCFG_COMHLD_OFFSET) & EXMC_NPCTCFG_COMHLD ) | + (((exmc_pccard_init_struct->common_space_timing->databus_hiztime - 1U) << NPCTCFG_COMHIZ_OFFSET) & EXMC_NPCTCFG_COMHIZ ); + + /* configure the EXMC bank3 PC card attribute space timing configuration register */ + EXMC_NPATCFG3 = (uint32_t)((exmc_pccard_init_struct->attribute_space_timing->setuptime - 1U) & EXMC_NPATCFG_ATTSET ) | + (((exmc_pccard_init_struct->attribute_space_timing->waittime - 1U) << NPATCFG_ATTWAIT_OFFSET) & EXMC_NPATCFG_ATTWAIT ) | + ((exmc_pccard_init_struct->attribute_space_timing->holdtime << NPATCFG_ATTHLD_OFFSET) & EXMC_NPATCFG_ATTHLD )| + (((exmc_pccard_init_struct->attribute_space_timing->databus_hiztime -1U) << NPATCFG_ATTHIZ_OFFSET) & EXMC_NPATCFG_ATTHIZ ); + + /* configure the EXMC bank3 PC card io space timing configuration register */ + EXMC_PIOTCFG3 = (uint32_t)((exmc_pccard_init_struct->io_space_timing->setuptime - 1U) & EXMC_PIOTCFG3_IOSET ) | + (((exmc_pccard_init_struct->io_space_timing->waittime - 1U) << PIOTCFG_IOWAIT_OFFSET) & EXMC_PIOTCFG3_IOWAIT ) | + ((exmc_pccard_init_struct->io_space_timing->holdtime << PIOTCFG_IOHLD_OFFSET) & EXMC_PIOTCFG3_IOHLD )| + ((exmc_pccard_init_struct->io_space_timing->databus_hiztime << PIOTCFG_IOHIZ_OFFSET) & EXMC_PIOTCFG3_IOHIZ ); +} + +/*! + \brief initialize the struct exmc_pccard_parameter_struct + \param[in] none + \param[out] the initialized struct exmc_pccard_parameter_struct pointer + \retval none +*/ +void exmc_pccard_struct_para_init(exmc_pccard_parameter_struct* exmc_pccard_init_struct) +{ + /* configure the structure with default value */ + exmc_pccard_init_struct->wait_feature = DISABLE; + exmc_pccard_init_struct->ctr_latency = 0x0U; + exmc_pccard_init_struct->atr_latency = 0x0U; + exmc_pccard_init_struct->common_space_timing->setuptime = 0xFCU; + exmc_pccard_init_struct->common_space_timing->waittime = 0xFCU; + exmc_pccard_init_struct->common_space_timing->holdtime = 0xFCU; + exmc_pccard_init_struct->common_space_timing->databus_hiztime = 0xFCU; + exmc_pccard_init_struct->attribute_space_timing->setuptime = 0xFCU; + exmc_pccard_init_struct->attribute_space_timing->waittime = 0xFCU; + exmc_pccard_init_struct->attribute_space_timing->holdtime = 0xFCU; + exmc_pccard_init_struct->attribute_space_timing->databus_hiztime = 0xFCU; + exmc_pccard_init_struct->io_space_timing->setuptime = 0xFCU; + exmc_pccard_init_struct->io_space_timing->waittime = 0xFCU; + exmc_pccard_init_struct->io_space_timing->holdtime = 0xFCU; + exmc_pccard_init_struct->io_space_timing->databus_hiztime = 0xFCU; +} + +/*! + \brief enable PC Card Bank + \param[in] none + \param[out] none + \retval none +*/ +void exmc_pccard_enable(void) +{ + EXMC_NPCTL3 |= EXMC_NPCTL_NDBKEN; +} + +/*! + \brief disable PC Card Bank + \param[in] none + \param[out] none + \retval none +*/ +void exmc_pccard_disable(void) +{ + EXMC_NPCTL3 &= ~EXMC_NPCTL_NDBKEN; +} + +/*! + \brief enable EXMC interrupt + \param[in] bank: specifies the NAND bank, PC card bank + only one parameter can be selected which is shown as below: + \arg EXMC_BANK1_NAND: the NAND bank1 + \arg EXMC_BANK2_NAND: the NAND bank2 + \arg EXMC_BANK3_PCCARD: the PC card bank + \param[in] interrupt_source: specify get which interrupt flag + one or more parameters can be selected which is shown as below: + \arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge + \arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level + \arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge + \param[out] none + \retval none +*/ +void exmc_interrupt_enable(uint32_t bank, uint32_t interrupt_source) +{ + /* NAND bank1, bank2 or PC card bank3 */ + EXMC_NPINTEN(bank) |= interrupt_source; +} + +/*! + \brief disable EXMC interrupt + \param[in] bank: specifies the NAND bank, PC card bank + only one parameter can be selected which is shown as below: + \arg EXMC_BANK1_NAND: the NAND bank1 + \arg EXMC_BANK2_NAND: the NAND bank2 + \arg EXMC_BANK3_PCCARD: the PC card bank + \param[in] interrupt_source: specify get which interrupt flag + one or more parameters can be selected which is shown as below: + \arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge + \arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level + \arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge + \param[out] none + \retval none +*/ +void exmc_interrupt_disable(uint32_t bank, uint32_t interrupt_source) +{ + /* NAND bank1,bank2 or PC card bank3 */ + EXMC_NPINTEN(bank) &= ~interrupt_source; +} + +/*! + \brief check EXMC flag is set or not + \param[in] bank: specifies the NAND bank, PC card bank + only one parameter can be selected which is shown as below: + \arg EXMC_BANK1_NAND: the NAND bank1 + \arg EXMC_BANK2_NAND: the NAND bank2 + \arg EXMC_BANK3_PCCARD: the PC Card bank + \param[in] flag: specify get which flag + only one parameter can be selected which is shown as below: + \arg EXMC_NAND_PCCARD_FLAG_RISE: interrupt rising edge status + \arg EXMC_NAND_PCCARD_FLAG_LEVEL: interrupt high-level status + \arg EXMC_NAND_PCCARD_FLAG_FALL: interrupt falling edge status + \arg EXMC_NAND_PCCARD_FLAG_FIFOE: FIFO empty flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus exmc_flag_get(uint32_t bank, uint32_t flag) +{ + uint32_t status = 0x00000000U; + + /* NAND bank1,bank2 or PC card bank3 */ + status = EXMC_NPINTEN(bank); + + if ((status & flag) != (uint32_t)flag ){ + /* flag is reset */ + return RESET; + }else{ + /* flag is set */ + return SET; + } +} + +/*! + \brief clear EXMC flag + \param[in] bank: specifie the NAND bank, PCCARD bank + only one parameter can be selected which is shown as below: + \arg EXMC_BANK1_NAND: the NAND bank1 + \arg EXMC_BANK2_NAND: the NAND bank2 + \arg EXMC_BANK3_PCCARD: the PC card bank + \param[in] flag: specify get which flag + one or more parameters can be selected which is shown as below: + \arg EXMC_NAND_PCCARD_FLAG_RISE: interrupt rising edge status + \arg EXMC_NAND_PCCARD_FLAG_LEVEL: interrupt high-level status + \arg EXMC_NAND_PCCARD_FLAG_FALL: interrupt falling edge status + \arg EXMC_NAND_PCCARD_FLAG_FIFOE: FIFO empty flag + \param[out] none + \retval none +*/ +void exmc_flag_clear(uint32_t bank, uint32_t flag) +{ + /* NAND bank1,bank2 or PC card bank3 */ + EXMC_NPINTEN(bank) &= ~flag; +} + +/*! + \brief check EXMC interrupt flag is set or not + \param[in] bank: specifies the NAND bank, PC card bank + only one parameter can be selected which is shown as below: + \arg EXMC_BANK1_NAND: the NAND bank1 + \arg EXMC_BANK2_NAND: the NAND bank2 + \arg EXMC_BANK3_PCCARD: the PC card bank + \param[in] interrupt_source: specify get which interrupt flag + only one parameter can be selected which is shown as below: + \arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge + \arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level + \arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus exmc_interrupt_flag_get(uint32_t bank, uint32_t interrupt_source) +{ + uint32_t status = 0x00000000U,interrupt_enable = 0x00000000U,interrupt_state = 0x00000000U; + + /* NAND bank1,bank2 or PC card bank3 */ + status = EXMC_NPINTEN(bank); + interrupt_state = (status & (interrupt_source >> INTEN_INTS_OFFSET)); + + interrupt_enable = (status & interrupt_source); + + if ((interrupt_enable) && (interrupt_state)){ + /* interrupt flag is set */ + return SET; + }else{ + /* interrupt flag is reset */ + return RESET; + } +} + +/*! + \brief clear EXMC interrupt flag + \param[in] bank: specifies the NAND bank, PC card bank + only one parameter can be selected which is shown as below: + \arg EXMC_BANK1_NAND: the NAND bank1 + \arg EXMC_BANK2_NAND: the NAND bank2 + \arg EXMC_BANK3_PCCARD: the PC card bank + \param[in] interrupt_source: specify get which interrupt flag + one or more parameters can be selected which is shown as below: + \arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge + \arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level + \arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge + \param[out] none + \retval none +*/ +void exmc_interrupt_flag_clear(uint32_t bank, uint32_t interrupt_source) +{ + /* NAND bank1, bank2 or PC card bank3 */ + EXMC_NPINTEN(bank) &= ~(interrupt_source >> INTEN_INTS_OFFSET); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_exti.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_exti.c new file mode 100644 index 0000000000000000000000000000000000000000..dcda291314c33b2fd494620166ebdc06bdfea452 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_exti.c @@ -0,0 +1,256 @@ +/*! + \file gd32f10x_exti.c + \brief EXTI driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_exti.h" + +#define EXTI_REG_RESET_VALUE ((uint32_t)0x00000000U) + +/*! + \brief deinitialize the EXTI + \param[in] none + \param[out] none + \retval none +*/ +void exti_deinit(void) +{ + /* reset the value of all the EXTI registers */ + EXTI_INTEN = EXTI_REG_RESET_VALUE; + EXTI_EVEN = EXTI_REG_RESET_VALUE; + EXTI_RTEN = EXTI_REG_RESET_VALUE; + EXTI_FTEN = EXTI_REG_RESET_VALUE; + EXTI_SWIEV = EXTI_REG_RESET_VALUE; +} + +/*! + \brief initialize the EXTI + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[in] mode: interrupt or event mode, refer to exti_mode_enum + only one parameter can be selected which is shown as below: + \arg EXTI_INTERRUPT: interrupt mode + \arg EXTI_EVENT: event mode + \param[in] trig_type: trigger type, refer to exti_trig_type_enum + only one parameter can be selected which is shown as below: + \arg EXTI_TRIG_RISING: rising edge trigger + \arg EXTI_TRIG_FALLING: falling edge trigger + \arg EXTI_TRIG_BOTH: rising edge and falling edge trigger + \param[out] none + \retval none +*/ +void exti_init(exti_line_enum linex, exti_mode_enum mode, exti_trig_type_enum trig_type) +{ + /* reset the EXTI line x */ + EXTI_INTEN &= ~(uint32_t)linex; + EXTI_EVEN &= ~(uint32_t)linex; + EXTI_RTEN &= ~(uint32_t)linex; + EXTI_FTEN &= ~(uint32_t)linex; + + /* set the EXTI mode and enable the interrupts or events from EXTI line x */ + switch(mode){ + case EXTI_INTERRUPT: + EXTI_INTEN |= (uint32_t)linex; + break; + case EXTI_EVENT: + EXTI_EVEN |= (uint32_t)linex; + break; + default: + break; + } + + /* set the EXTI trigger type */ + switch(trig_type){ + case EXTI_TRIG_RISING: + EXTI_RTEN |= (uint32_t)linex; + EXTI_FTEN &= ~(uint32_t)linex; + break; + case EXTI_TRIG_FALLING: + EXTI_RTEN &= ~(uint32_t)linex; + EXTI_FTEN |= (uint32_t)linex; + break; + case EXTI_TRIG_BOTH: + EXTI_RTEN |= (uint32_t)linex; + EXTI_FTEN |= (uint32_t)linex; + break; + default: + break; + } +} + +/*! + \brief enable the interrupts from EXTI line x + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_interrupt_enable(exti_line_enum linex) +{ + EXTI_INTEN |= (uint32_t)linex; +} + +/*! + \brief enable the events from EXTI line x + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_event_enable(exti_line_enum linex) +{ + EXTI_EVEN |= (uint32_t)linex; +} + +/*! + \brief disable the interrupt from EXTI line x + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_interrupt_disable(exti_line_enum linex) +{ + EXTI_INTEN &= ~(uint32_t)linex; +} + +/*! + \brief disable the events from EXTI line x + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_event_disable(exti_line_enum linex) +{ + EXTI_EVEN &= ~(uint32_t)linex; +} + +/*! + \brief get EXTI lines flag + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval FlagStatus: status of flag (RESET or SET) +*/ +FlagStatus exti_flag_get(exti_line_enum linex) +{ + if(RESET != (EXTI_PD & (uint32_t)linex)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear EXTI lines pending flag + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_flag_clear(exti_line_enum linex) +{ + EXTI_PD = (uint32_t)linex; +} + +/*! + \brief get EXTI lines flag when the interrupt flag is set + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval FlagStatus: status of flag (RESET or SET) +*/ +FlagStatus exti_interrupt_flag_get(exti_line_enum linex) +{ + uint32_t flag_left, flag_right; + + flag_left = EXTI_PD & (uint32_t)linex; + flag_right = EXTI_INTEN & (uint32_t)linex; + + if((RESET != flag_left) && (RESET != flag_right)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear EXTI lines pending flag + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_interrupt_flag_clear(exti_line_enum linex) +{ + EXTI_PD = (uint32_t)linex; +} + +/*! + \brief enable EXTI software interrupt event + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_software_interrupt_enable(exti_line_enum linex) +{ + EXTI_SWIEV |= (uint32_t)linex; +} + +/*! + \brief disable EXTI software interrupt event + \param[in] linex: EXTI line number, refer to exti_line_enum + only one parameter can be selected which is shown as below: + \arg EXTI_x (x=0..19): EXTI line x + \param[out] none + \retval none +*/ +void exti_software_interrupt_disable(exti_line_enum linex) +{ + EXTI_SWIEV &= ~(uint32_t)linex; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_fmc.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_fmc.c new file mode 100644 index 0000000000000000000000000000000000000000..83da3519e0502ad94eeab4dc191e7fb3f3f1cdda --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_fmc.c @@ -0,0 +1,965 @@ +/*! + \file gd32f10x_fmc.c + \brief FMC driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_fmc.h" + +/*! + \brief set the wait state counter value + \param[in] wscnt£ºwait state counter value + \arg WS_WSCNT_0: FMC 0 wait state + \arg WS_WSCNT_1: FMC 1 wait state + \arg WS_WSCNT_2: FMC 2 wait state + \param[out] none + \retval none +*/ +void fmc_wscnt_set(uint32_t wscnt) +{ + uint32_t reg; + + reg = FMC_WS; + /* set the wait state counter value */ + reg &= ~FMC_WS_WSCNT; + FMC_WS = (reg | wscnt); +} + +/*! + \brief unlock the main FMC operation + \param[in] none + \param[out] none + \retval none +*/ +void fmc_unlock(void) +{ + if((RESET != (FMC_CTL0 & FMC_CTL0_LK))){ + /* write the FMC unlock key */ + FMC_KEY0 = UNLOCK_KEY0; + FMC_KEY0 = UNLOCK_KEY1; + } + + if(FMC_BANK0_SIZE < FMC_SIZE){ + /* write the FMC unlock key */ + if(RESET != (FMC_CTL1 & FMC_CTL1_LK)){ + FMC_KEY1 = UNLOCK_KEY0; + FMC_KEY1 = UNLOCK_KEY1; + } + } +} + +/*! + \brief unlock the FMC bank0 operation + this function can be used for all GD32F10x devices. + for GD32F10x_MD and GD32F10x_HD, this function unlocks bank0. + for GD32F10x_XD and GD32F10x_CL with flash no more than 512KB, it is equivalent to fmc_unlock function. + \param[in] none + \param[out] none + \retval none +*/ +void fmc_bank0_unlock(void) +{ + if((RESET != (FMC_CTL0 & FMC_CTL0_LK))){ + /* write the FMC unlock key */ + FMC_KEY0 = UNLOCK_KEY0; + FMC_KEY0 = UNLOCK_KEY1; + } +} + +/*! + \brief unlock the FMC bank1 operation + this function can be used for GD32F10x_XD and GD32F10x_CL with flash more than 512KB. + \param[in] none + \param[out] none + \retval none +*/ +void fmc_bank1_unlock(void) +{ + if((RESET != (FMC_CTL1 & FMC_CTL1_LK))){ + /* write the FMC unlock key */ + FMC_KEY1 = UNLOCK_KEY0; + FMC_KEY1 = UNLOCK_KEY1; + } +} + +/*! + \brief lock the main FMC operation + \param[in] none + \param[out] none + \retval none +*/ +void fmc_lock(void) +{ + /* set the LK bit */ + FMC_CTL0 |= FMC_CTL0_LK; + + if(FMC_BANK0_SIZE < FMC_SIZE){ + /* set the LK bit */ + FMC_CTL1 |= FMC_CTL1_LK; + } +} + +/*! + \brief lock the FMC bank0 operation + this function can be used for all GD32F10X devices. + for GD32F10x_MD and GD32F10x_HD, this function unlocks bank0. + for GD32F10x_XD and GD32F10x_CL with flash no more than 512KB, it is equivalent to fmc_unlock function. + \param[in] none + \param[out] none + \retval none +*/ +void fmc_bank0_lock(void) +{ + /* set the LK bit*/ + FMC_CTL0 |= FMC_CTL0_LK; +} + +/*! + \brief lock the FMC bank1 operation + this function can be used for GD32F10x_XD and GD32F10x_CL with flash more than 512KB. + \param[in] none + \param[out] none + \retval none +*/ +void fmc_bank1_lock(void) +{ + /* set the LK bit*/ + FMC_CTL1 |= FMC_CTL1_LK; +} + +/*! + \brief erase page + \param[in] page_address: the page address to be erased. + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_page_erase(uint32_t page_address) +{ + fmc_state_enum fmc_state; + + if(FMC_BANK0_SIZE < FMC_SIZE){ + if(FMC_BANK0_END_ADDRESS > page_address){ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* if the last operation is completed, start page erase */ + if(FMC_READY == fmc_state){ + FMC_CTL0 |= FMC_CTL0_PER; + FMC_ADDR0 = page_address; + FMC_CTL0 |= FMC_CTL0_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PER bit */ + FMC_CTL0 &= ~FMC_CTL0_PER; + } + }else{ + /* wait for the FMC ready */ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + /* if the last operation is completed, start page erase */ + if(FMC_READY == fmc_state){ + FMC_CTL1 |= FMC_CTL1_PER; + FMC_ADDR1 = page_address; + if(FMC_OBSTAT & FMC_OBSTAT_SPC){ + FMC_ADDR0 = page_address; + } + FMC_CTL1 |= FMC_CTL1_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PER bit */ + FMC_CTL1 &= ~FMC_CTL1_PER; + } + } + }else{ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* if the last operation is completed, start page erase */ + if(FMC_READY == fmc_state){ + FMC_CTL0 |= FMC_CTL0_PER; + FMC_ADDR0 = page_address; + FMC_CTL0 |= FMC_CTL0_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PER bit */ + FMC_CTL0 &= ~FMC_CTL0_PER; + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief erase whole chip + \param[in] none + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_mass_erase(void) +{ + fmc_state_enum fmc_state; + if(FMC_BANK0_SIZE < FMC_SIZE){ + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + if(FMC_READY == fmc_state){ + /* start whole chip erase */ + FMC_CTL0 |= FMC_CTL0_MER; + FMC_CTL0 |= FMC_CTL0_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the MER bit */ + FMC_CTL0 &= ~FMC_CTL0_MER; + } + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + if(FMC_READY == fmc_state){ + /* start whole chip erase */ + FMC_CTL1 |= FMC_CTL1_MER; + FMC_CTL1 |= FMC_CTL1_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the MER bit */ + FMC_CTL1 &= ~FMC_CTL1_MER; + } + }else{ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* start whole chip erase */ + FMC_CTL0 |= FMC_CTL0_MER; + FMC_CTL0 |= FMC_CTL0_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the MER bit */ + FMC_CTL0 &= ~FMC_CTL0_MER; + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief erase bank0 + \param[in] none + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_bank0_erase(void) +{ + fmc_state_enum fmc_state = FMC_READY; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* start FMC bank0 erase */ + FMC_CTL0 |= FMC_CTL0_MER; + FMC_CTL0 |= FMC_CTL0_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the MER bit */ + FMC_CTL0 &= ~FMC_CTL0_MER; + } + /* return the fmc state */ + return fmc_state; +} + +/*! + \brief erase bank1 + \param[in] none + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_bank1_erase(void) +{ + fmc_state_enum fmc_state = FMC_READY; + /* wait for the FMC ready */ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* start FMC bank1 erase */ + FMC_CTL1 |= FMC_CTL1_MER; + FMC_CTL1 |= FMC_CTL1_START; + /* wait for the FMC ready */ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the MER bit */ + FMC_CTL1 &= ~FMC_CTL1_MER; + } + /* return the fmc state */ + return fmc_state; +} + +/*! + \brief program a word at the corresponding address + \param[in] address: address to program + \param[in] data: word to program + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_word_program(uint32_t address, uint32_t data) +{ + fmc_state_enum fmc_state = FMC_READY; + if(FMC_BANK0_SIZE < FMC_SIZE){ + if(FMC_BANK0_END_ADDRESS > address){ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the PG bit to start program */ + FMC_CTL0 |= FMC_CTL0_PG; + REG32(address) = data; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PG bit */ + FMC_CTL0 &= ~FMC_CTL0_PG; + } + }else{ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the PG bit to start program */ + FMC_CTL1 |= FMC_CTL1_PG; + REG32(address) = data; + /* wait for the FMC ready */ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PG bit */ + FMC_CTL1 &= ~FMC_CTL1_PG; + } + } + }else{ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the PG bit to start program */ + FMC_CTL0 |= FMC_CTL0_PG; + REG32(address) = data; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PG bit */ + FMC_CTL0 &= ~FMC_CTL0_PG; + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief program a half word at the corresponding address + \param[in] address: address to program + \param[in] data: halfword to program + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_halfword_program(uint32_t address, uint16_t data) +{ + fmc_state_enum fmc_state = FMC_READY; + if(FMC_BANK0_SIZE > FMC_SIZE){ + if(FMC_BANK0_END_ADDRESS > address){ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the PG bit to start program */ + FMC_CTL0 |= FMC_CTL0_PG; + REG16(address) = data; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PG bit */ + FMC_CTL0 &= ~FMC_CTL0_PG; + } + }else{ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the PG bit to start program */ + FMC_CTL1 |= FMC_CTL1_PG; + REG16(address) = data; + /* wait for the FMC ready */ + fmc_state = fmc_bank1_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PG bit */ + FMC_CTL1 &= ~FMC_CTL1_PG; + } + } + }else{ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the PG bit to start program */ + FMC_CTL0 |= FMC_CTL0_PG; + REG16(address) = data; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + /* reset the PG bit */ + FMC_CTL0 &= ~FMC_CTL0_PG; + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief unlock the option byte operation + \param[in] none + \param[out] none + \retval none +*/ +void ob_unlock(void) +{ + if(RESET == (FMC_CTL0 & FMC_CTL0_OBWEN)){ + /* write the FMC key */ + FMC_OBKEY = UNLOCK_KEY0; + FMC_OBKEY = UNLOCK_KEY1; + } + + /* wait until OBWEN bit is set by hardware */ + while(RESET == (FMC_CTL0 & FMC_CTL0_OBWEN)){ + } +} + +/*! + \brief lock the option byte operation + \param[in] none + \param[out] none + \retval none +*/ +void ob_lock(void) +{ + /* reset the OBWEN bit */ + FMC_CTL0 &= ~FMC_CTL0_OBWEN; +} + +/*! + \brief erase the FMC option byte + unlock the FMC_CTL0 and option byte before calling this function + \param[in] none + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum ob_erase(void) +{ + uint16_t temp_spc = FMC_NSPC; + + fmc_state_enum fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + /* check the option byte security protection value */ + if(RESET != ob_spc_get()){ + temp_spc = FMC_USPC; + } + + if(FMC_READY == fmc_state){ + + /* start erase the option byte */ + FMC_CTL0 |= FMC_CTL0_OBER; + FMC_CTL0 |= FMC_CTL0_START; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* reset the OBER bit */ + FMC_CTL0 &= ~FMC_CTL0_OBER; + /* set the OBPG bit */ + FMC_CTL0 |= FMC_CTL0_OBPG; + /* no security protection */ + OB_SPC = (uint16_t)temp_spc; + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + if(FMC_TOERR != fmc_state){ + /* reset the OBPG bit */ + FMC_CTL0 &= ~FMC_CTL0_OBPG; + } + }else{ + if(FMC_TOERR != fmc_state){ + /* reset the OBPG bit */ + FMC_CTL0 &= ~FMC_CTL0_OBPG; + } + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief enable write protection + \param[in] ob_wp: specify sector to be write protected, set the bit to 1 if + you want to protect the corresponding pages. meanwhile, sector + macro could used to set specific sector write protected. + one or more parameters can be selected which are shown as below: + \arg OB_WPx(x = 0..31): write protect specify sector + \arg OB_WP_ALL: write protect all sector + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum ob_write_protection_enable(uint32_t ob_wp) +{ + uint16_t temp_wp0, temp_wp1, temp_wp2, temp_wp3; + + fmc_state_enum fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + ob_wp = (uint32_t)(~ob_wp); + temp_wp0 = (uint16_t)(ob_wp & OB_WP0_WP0); + temp_wp1 = (uint16_t)((ob_wp & OB_WP1_WP1) >> 8U); + temp_wp2 = (uint16_t)((ob_wp & OB_WP2_WP2) >> 16U); + temp_wp3 = (uint16_t)((ob_wp & OB_WP3_WP3) >> 24U); + + if(FMC_READY == fmc_state){ + + /* set the OBPG bit*/ + FMC_CTL0 |= FMC_CTL0_OBPG; + + if(0xFFU != temp_wp0){ + OB_WP0 = temp_wp0; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + } + if((FMC_READY == fmc_state) && (0xFFU != temp_wp1)){ + OB_WP1 = temp_wp1; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + } + if((FMC_READY == fmc_state) && (0xFFU != temp_wp2)){ + OB_WP2 = temp_wp2; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + } + if((FMC_READY == fmc_state) && (0xFFU != temp_wp3)){ + OB_WP3 = temp_wp3; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + } + if(FMC_TOERR != fmc_state){ + /* reset the OBPG bit */ + FMC_CTL0 &= ~FMC_CTL0_OBPG; + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief configure security protection + \param[in] ob_spc: specify security protection + only one parameter can be selected which is shown as below: + \arg FMC_NSPC: no security protection + \arg FMC_USPC: under security protection + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum ob_security_protection_config(uint8_t ob_spc) +{ + fmc_state_enum fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + FMC_CTL0 |= FMC_CTL0_OBER; + FMC_CTL0 |= FMC_CTL0_START; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* reset the OBER bit */ + FMC_CTL0 &= ~FMC_CTL0_OBER; + + /* start the option byte program */ + FMC_CTL0 |= FMC_CTL0_OBPG; + + OB_SPC = (uint16_t)ob_spc; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_TOERR != fmc_state){ + /* reset the OBPG bit */ + FMC_CTL0 &= ~FMC_CTL0_OBPG; + } + }else{ + if(FMC_TOERR != fmc_state){ + /* reset the OBER bit */ + FMC_CTL0 &= ~FMC_CTL0_OBER; + } + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief program the FMC user option byte + \param[in] ob_fwdgt: option byte watchdog value + \arg OB_FWDGT_SW: software free watchdog + \arg OB_FWDGT_HW: hardware free watchdog + \param[in] ob_deepsleep: option byte deepsleep reset value + \arg OB_DEEPSLEEP_NRST: no reset when entering deepsleep mode + \arg OB_DEEPSLEEP_RST: generate a reset instead of entering deepsleep mode + \param[in] ob_stdby:option byte standby reset value + \arg OB_STDBY_NRST: no reset when entering standby mode + \arg OB_STDBY_RST: generate a reset instead of entering standby mode + \param[in] ob_boot: specifies the option byte boot bank value + \arg OB_BOOT_B0: boot from bank0 + \arg OB_BOOT_B1: boot from bank1 or bank0 if bank1 is void + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum ob_user_write(uint8_t ob_fwdgt, uint8_t ob_deepsleep, uint8_t ob_stdby, uint8_t ob_boot) +{ + fmc_state_enum fmc_state = FMC_READY; + uint8_t temp; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the OBPG bit*/ + FMC_CTL0 |= FMC_CTL0_OBPG; + + temp = ((uint8_t)((uint8_t)((uint8_t)(ob_boot | ob_fwdgt) | ob_deepsleep) | ob_stdby) | OB_USER_MASK); + OB_USER = (uint16_t)temp; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_TOERR != fmc_state){ + /* reset the OBPG bit */ + FMC_CTL0 &= ~FMC_CTL0_OBPG; + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief program option bytes data + \param[in] address: the option bytes address to be programmed + \param[in] data: the byte to be programmed + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum ob_data_program(uint32_t address, uint8_t data) +{ + fmc_state_enum fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_READY == fmc_state){ + /* set the OBPG bit */ + FMC_CTL0 |= FMC_CTL0_OBPG; + REG16(address) = data; + + /* wait for the FMC ready */ + fmc_state = fmc_bank0_ready_wait(FMC_TIMEOUT_COUNT); + + if(FMC_TOERR != fmc_state){ + /* reset the OBPG bit */ + FMC_CTL0 &= ~FMC_CTL0_OBPG; + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief get the FMC user option byte + \param[in] none + \param[out] none + \retval the FMC user option byte values +*/ +uint8_t ob_user_get(void) +{ + /* return the FMC user option byte value */ + return (uint8_t)(FMC_OBSTAT >> 2U); +} + +/*! + \brief get OB_DATA in register FMC_OBSTAT + \param[in] none + \param[out] none + \retval ob_data +*/ +uint16_t ob_data_get(void) +{ + return (uint16_t)(FMC_OBSTAT >> 10U); +} + +/*! + \brief get the FMC option byte write protection + \param[in] none + \param[out] none + \retval the FMC write protection option byte value +*/ +uint32_t ob_write_protection_get(void) +{ + /* return the FMC write protection option byte value */ + return FMC_WP; +} + +/*! + \brief get the FMC option byte security protection + \param[in] none + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus ob_spc_get(void) +{ + FlagStatus spc_state = RESET; + + if(RESET != (FMC_OBSTAT & FMC_OBSTAT_SPC)){ + spc_state = SET; + }else{ + spc_state = RESET; + } + return spc_state; +} + +/*! + \brief enable FMC interrupt + \param[in] interrupt: the FMC interrupt source + only one parameter can be selected which is shown as below: + \arg FMC_INT_BANK0_END: enable FMC end of program interrupt + \arg FMC_INT_BANK0_ERR: enable FMC error interrupt + \arg FMC_INT_BANK1_END: enable FMC bank1 end of program interrupt + \arg FMC_INT_BANK1_ERR: enable FMC bank1 error interrupt + \param[out] none + \retval none +*/ +void fmc_interrupt_enable(uint32_t interrupt) +{ + FMC_REG_VAL(interrupt) |= BIT(FMC_BIT_POS(interrupt)); +} + +/*! + \brief disable FMC interrupt + \param[in] interrupt: the FMC interrupt source + only one parameter can be selected which is shown as below: + \arg FMC_INT_BANK0_END: enable FMC end of program interrupt + \arg FMC_INT_BANK0_ERR: enable FMC error interrupt + \arg FMC_INT_BANK1_END: enable FMC bank1 end of program interrupt + \arg FMC_INT_BANK1_ERR: enable FMC bank1 error interrupt + \param[out] none + \retval none +*/ +void fmc_interrupt_disable(uint32_t interrupt) +{ + FMC_REG_VAL(interrupt) &= ~BIT(FMC_BIT_POS(interrupt)); +} + +/*! + \brief check flag is set or not + \param[in] flag: check FMC flag + only one parameter can be selected which is shown as below: + \arg FMC_FLAG_BANK0_BUSY: FMC bank0 busy flag bit + \arg FMC_FLAG_BANK0_PGERR: FMC bank0 operation error flag bit + \arg FMC_FLAG_BANK0_WPERR: FMC bank0 erase/program protection error flag bit + \arg FMC_FLAG_BANK0_END: FMC bank0 end of operation flag bit + \arg FMC_FLAG_OBERR: FMC option bytes read error flag bit + \arg FMC_FLAG_BANK1_BUSY: FMC bank1 busy flag bit + \arg FMC_FLAG_BANK1_PGERR: FMC bank1 operation error flag bit + \arg FMC_FLAG_BANK1_WPERR: FMC bank1 erase/program protection error flag bit + \arg FMC_FLAG_BANK1_END: FMC bank1 end of operation flag bit + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus fmc_flag_get(uint32_t flag) +{ + if(RESET != (FMC_REG_VAL(flag) & BIT(FMC_BIT_POS(flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear the FMC flag + \param[in] flag: clear FMC flag + only one parameter can be selected which is shown as below: + \arg FMC_FLAG_BANK0_PGERR: FMC bank0 operation error flag bit + \arg FMC_FLAG_BANK0_WPERR: FMC bank0 erase/program protection error flag bit + \arg FMC_FLAG_BANK0_END: FMC bank0 end of operation flag bit + \arg FMC_FLAG_BANK1_PGERR: FMC bank1 operation error flag bit + \arg FMC_FLAG_BANK1_WPERR: FMC bank1 erase/program protection error flag bit + \arg FMC_FLAG_BANK1_END: FMC bank1 end of operation flag bit + \param[out] none + \retval none +*/ +void fmc_flag_clear(uint32_t flag) +{ + FMC_REG_VAL(flag) |= BIT(FMC_BIT_POS(flag)); +} + +/*! + \brief get FMC interrupt flag state + \param[in] flag: FMC interrupt flags, refer to fmc_interrupt_flag_enum + only one parameter can be selected which is shown as below: + \arg FMC_INT_FLAG_BANK0_PGERR: FMC bank0 operation error interrupt flag bit + \arg FMC_INT_FLAG_BANK0_WPERR: FMC bank0 erase/program protection error interrupt flag bit + \arg FMC_INT_FLAG_BANK0_END: FMC bank0 end of operation interrupt flag bit + \arg FMC_INT_FLAG_BANK1_PGERR: FMC bank1 operation error interrupt flag bit + \arg FMC_INT_FLAG_BANK1_WPERR: FMC bank1 erase/program protection error interrupt flag bit + \arg FMC_INT_FLAG_BANK1_END: FMC bank1 end of operation interrupt flag bit + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus fmc_interrupt_flag_get(fmc_interrupt_flag_enum flag) +{ + FlagStatus ret1 = RESET; + FlagStatus ret2 = RESET; + + if(FMC_STAT0_REG_OFFSET == FMC_REG_OFFSET_GET(flag)){ + /* get the staus of interrupt flag */ + ret1 = (FlagStatus)(FMC_REG_VALS(flag) & BIT(FMC_BIT_POS0(flag))); + /* get the staus of interrupt enale bit */ + ret2 = (FlagStatus)(FMC_CTL0 & BIT(FMC_BIT_POS1(flag))); + }else{ + /* get the staus of interrupt flag */ + ret1 = (FlagStatus)(FMC_REG_VALS(flag) & BIT(FMC_BIT_POS0(flag))); + /* get the staus of interrupt enale bit */ + ret2 = (FlagStatus)(FMC_CTL1 & BIT(FMC_BIT_POS1(flag))); + } + + if(ret1 && ret2){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear FMC interrupt flag state + \param[in] flag: FMC interrupt flags, refer to can_interrupt_flag_enum + only one parameter can be selected which is shown as below: + \arg FMC_INT_FLAG_BANK0_PGERR: FMC bank0 operation error interrupt flag bit + \arg FMC_INT_FLAG_BANK0_WPERR: FMC bank0 erase/program protection error interrupt flag bit + \arg FMC_INT_FLAG_BANK0_END: FMC bank0 end of operation interrupt flag bit + \arg FMC_INT_FLAG_BANK1_PGERR: FMC bank1 operation error interrupt flag bit + \arg FMC_INT_FLAG_BANK1_WPERR: FMC bank1 erase/program protection error interrupt flag bit + \arg FMC_INT_FLAG_BANK1_END: FMC bank1 end of operation interrupt flag bit + \param[out] none + \retval none +*/ +void fmc_interrupt_flag_clear(fmc_interrupt_flag_enum flag) +{ + FMC_REG_VALS(flag) |= BIT(FMC_BIT_POS0(flag)); +} + +/*! + \brief get the FMC bank0 state + \param[in] none + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_bank0_state_get(void) +{ + fmc_state_enum fmc_state = FMC_READY; + + if((uint32_t)0x00U != (FMC_STAT0 & FMC_STAT0_BUSY)){ + fmc_state = FMC_BUSY; + }else{ + if((uint32_t)0x00U != (FMC_STAT0 & FMC_STAT0_WPERR)){ + fmc_state = FMC_WPERR; + }else{ + if((uint32_t)0x00U != (FMC_STAT0 & (FMC_STAT0_PGERR))){ + fmc_state = FMC_PGERR; + } + } + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief get the FMC bank1 state + \param[in] none + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_bank1_state_get(void) +{ + fmc_state_enum fmc_state = FMC_READY; + + if((uint32_t)0x00U != (FMC_STAT1 & FMC_STAT1_BUSY)){ + fmc_state = FMC_BUSY; + }else{ + if((uint32_t)0x00U != (FMC_STAT1 & FMC_STAT1_WPERR)){ + fmc_state = FMC_WPERR; + }else{ + if((uint32_t)0x00U != (FMC_STAT1 & FMC_STAT1_PGERR)){ + fmc_state = FMC_PGERR; + } + } + } + + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief check whether FMC bank0 is ready or not + \param[in] timeout: count of loop + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_bank0_ready_wait(uint32_t timeout) +{ + fmc_state_enum fmc_state = FMC_BUSY; + + /* wait for FMC ready */ + do{ + /* get FMC state */ + fmc_state = fmc_bank0_state_get(); + timeout--; + }while((FMC_BUSY == fmc_state) && (0x00U != timeout)); + + if(FMC_BUSY == fmc_state){ + fmc_state = FMC_TOERR; + } + /* return the FMC state */ + return fmc_state; +} + +/*! + \brief check whether FMC bank1 is ready or not + \param[in] timeout: count of loop + \param[out] none + \retval state of FMC, refer to fmc_state_enum +*/ +fmc_state_enum fmc_bank1_ready_wait(uint32_t timeout) +{ + fmc_state_enum fmc_state = FMC_BUSY; + + /* wait for FMC ready */ + do{ + /* get FMC state */ + fmc_state = fmc_bank1_state_get(); + timeout--; + }while((FMC_BUSY == fmc_state) && (0x00U != timeout)); + + if(FMC_BUSY == fmc_state){ + fmc_state = FMC_TOERR; + } + /* return the FMC state */ + return fmc_state; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_fwdgt.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_fwdgt.c new file mode 100644 index 0000000000000000000000000000000000000000..0025c9a572bd5f72d8c8abe9b24340edfc99ee88 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_fwdgt.c @@ -0,0 +1,155 @@ +/*! + \file gd32f10x_fwdgt.c + \brief FWDGT driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_fwdgt.h" + +/* write value to FWDGT_CTL_CMD bit field */ +#define CTL_CMD(regval) (BITS(0,15) & ((uint32_t)(regval) << 0)) +/* write value to FWDGT_RLD_RLD bit field */ +#define RLD_RLD(regval) (BITS(0,11) & ((uint32_t)(regval) << 0)) + +/*! + \brief enable write access to FWDGT_PSC and FWDGT_RLD + \param[in] none + \param[out] none + \retval none +*/ +void fwdgt_write_enable(void) +{ + FWDGT_CTL = FWDGT_WRITEACCESS_ENABLE; +} + +/*! + \brief disable write access to FWDGT_PSC and FWDGT_RLD + \param[in] none + \param[out] none + \retval none +*/ +void fwdgt_write_disable(void) +{ + FWDGT_CTL = FWDGT_WRITEACCESS_DISABLE; +} + +/*! + \brief start the free watchdog timer counter + \param[in] none + \param[out] none + \retval none +*/ +void fwdgt_enable(void) +{ + FWDGT_CTL = FWDGT_KEY_ENABLE; +} + +/*! + \brief reload the counter of FWDGT + \param[in] none + \param[out] none + \retval none +*/ +void fwdgt_counter_reload(void) +{ + FWDGT_CTL = FWDGT_KEY_RELOAD; +} + +/*! + \brief configure counter reload value, and prescaler divider value + \param[in] reload_value: specify reload value(0x0000 - 0x0FFF) + \param[in] prescaler_div: FWDGT prescaler value + only one parameter can be selected which is shown as below: + \arg FWDGT_PSC_DIV4: FWDGT prescaler set to 4 + \arg FWDGT_PSC_DIV8: FWDGT prescaler set to 8 + \arg FWDGT_PSC_DIV16: FWDGT prescaler set to 16 + \arg FWDGT_PSC_DIV32: FWDGT prescaler set to 32 + \arg FWDGT_PSC_DIV64: FWDGT prescaler set to 64 + \arg FWDGT_PSC_DIV128: FWDGT prescaler set to 128 + \arg FWDGT_PSC_DIV256: FWDGT prescaler set to 256 + \param[out] none + \retval ErrStatus: ERROR or SUCCESS +*/ +ErrStatus fwdgt_config(uint16_t reload_value, uint8_t prescaler_div) +{ + uint32_t timeout = FWDGT_PSC_TIMEOUT; + uint32_t flag_status = RESET; + + /* enable write access to FWDGT_PSC,and FWDGT_RLD */ + FWDGT_CTL = FWDGT_WRITEACCESS_ENABLE; + /* wait until the PUD flag to be reset */ + do{ + flag_status = FWDGT_STAT & FWDGT_STAT_PUD; + }while((--timeout > 0U) && ((uint32_t)RESET != flag_status)); + + if((uint32_t)RESET != flag_status){ + return ERROR; + } + /* configure FWDGT */ + FWDGT_PSC = (uint32_t)prescaler_div; + + timeout = FWDGT_RLD_TIMEOUT; + /* wait until the RUD flag to be reset */ + do{ + flag_status = FWDGT_STAT & FWDGT_STAT_RUD; + }while((--timeout > 0U) && ((uint32_t)RESET != flag_status)); + + if((uint32_t)RESET != flag_status){ + return ERROR; + } + FWDGT_RLD = RLD_RLD(reload_value); + /* reload the counter */ + FWDGT_CTL = FWDGT_KEY_RELOAD; + + return SUCCESS; +} + +/*! + \brief get flag state of FWDGT + \param[in] flag: flag to get + only one parameter can be selected which is shown as below: + \arg FWDGT_FLAG_PUD: a write operation to FWDGT_PSC register is on going + \arg FWDGT_FLAG_RUD: a write operation to FWDGT_RLD register is on going + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus fwdgt_flag_get(uint16_t flag) +{ + if(FWDGT_STAT & flag){ + return SET; + } + + return RESET; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_gpio.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_gpio.c new file mode 100644 index 0000000000000000000000000000000000000000..d8bdd709bb91dcc286763dba95484a0354ddb5a6 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_gpio.c @@ -0,0 +1,539 @@ +/*! + \file gd32f10x_gpio.c + \brief GPIO driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_gpio.h" + +#define AFIO_EXTI_SOURCE_MASK ((uint8_t)0x03U) /*!< AFIO exti source selection mask*/ +#define AFIO_EXTI_SOURCE_FIELDS ((uint8_t)0x04U) /*!< select AFIO exti source registers */ +#define LSB_16BIT_MASK ((uint16_t)0xFFFFU) /*!< LSB 16-bit mask */ +#define PCF_POSITION_MASK ((uint32_t)0x000F0000U) /*!< AFIO_PCF register position mask */ +#define PCF_SWJCFG_MASK ((uint32_t)0xF0FFFFFFU) /*!< AFIO_PCF register SWJCFG mask */ +#define PCF_LOCATION1_MASK ((uint32_t)0x00200000U) /*!< AFIO_PCF register location1 mask */ +#define PCF_LOCATION2_MASK ((uint32_t)0x00100000U) /*!< AFIO_PCF register location2 mask */ +#define AFIO_PCF1_FIELDS ((uint32_t)0x80000000U) /*!< select AFIO_PCF1 register */ +#define GPIO_OUTPUT_PORT_OFFSET ((uint32_t)4U) /*!< GPIO event output port offset*/ + +/*! + \brief reset GPIO port + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[out] none + \retval none +*/ +void gpio_deinit(uint32_t gpio_periph) +{ + switch(gpio_periph){ + case GPIOA: + /* reset GPIOA */ + rcu_periph_reset_enable(RCU_GPIOARST); + rcu_periph_reset_disable(RCU_GPIOARST); + break; + case GPIOB: + /* reset GPIOB */ + rcu_periph_reset_enable(RCU_GPIOBRST); + rcu_periph_reset_disable(RCU_GPIOBRST); + break; + case GPIOC: + /* reset GPIOC */ + rcu_periph_reset_enable(RCU_GPIOCRST); + rcu_periph_reset_disable(RCU_GPIOCRST); + break; + case GPIOD: + /* reset GPIOD */ + rcu_periph_reset_enable(RCU_GPIODRST); + rcu_periph_reset_disable(RCU_GPIODRST); + break; + case GPIOE: + /* reset GPIOE */ + rcu_periph_reset_enable(RCU_GPIOERST); + rcu_periph_reset_disable(RCU_GPIOERST); + break; + case GPIOF: + /* reset GPIOF */ + rcu_periph_reset_enable(RCU_GPIOFRST); + rcu_periph_reset_disable(RCU_GPIOFRST); + break; + case GPIOG: + /* reset GPIOG */ + rcu_periph_reset_enable(RCU_GPIOGRST); + rcu_periph_reset_disable(RCU_GPIOGRST); + break; + default: + break; + } +} + +/*! + \brief reset alternate function I/O(AFIO) + \param[in] none + \param[out] none + \retval none +*/ +void gpio_afio_deinit(void) +{ + rcu_periph_reset_enable(RCU_AFRST); + rcu_periph_reset_disable(RCU_AFRST); +} + +/*! + \brief GPIO parameter initialization + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] mode: gpio pin mode + only one parameter can be selected which is shown as below: + \arg GPIO_MODE_AIN: analog input mode + \arg GPIO_MODE_IN_FLOATING: floating input mode + \arg GPIO_MODE_IPD: pull-down input mode + \arg GPIO_MODE_IPU: pull-up input mode + \arg GPIO_MODE_OUT_OD: GPIO output with open-drain + \arg GPIO_MODE_OUT_PP: GPIO output with push-pull + \arg GPIO_MODE_AF_OD: AFIO output with open-drain + \arg GPIO_MODE_AF_PP: AFIO output with push-pull + \param[in] speed: gpio output max speed value + only one parameter can be selected which is shown as below: + \arg GPIO_OSPEED_10MHZ: output max speed 10MHz + \arg GPIO_OSPEED_2MHZ: output max speed 2MHz + \arg GPIO_OSPEED_50MHZ: output max speed 50MHz + \param[in] pin: GPIO pin + one or more parameters can be selected which are shown as below: + \arg GPIO_PIN_x(x=0..15), GPIO_PIN_ALL + + \param[out] none + \retval none +*/ +void gpio_init(uint32_t gpio_periph, uint32_t mode, uint32_t speed, uint32_t pin) +{ + uint16_t i; + uint32_t temp_mode = 0U; + uint32_t reg = 0U; + + /* GPIO mode configuration */ + temp_mode = (uint32_t)(mode & ((uint32_t)0x0FU)); + + /* GPIO speed configuration */ + if(((uint32_t)0x00U) != ((uint32_t)mode & ((uint32_t)0x10U))){ + /* output mode max speed:10MHz,2MHz,50MHz */ + temp_mode |= (uint32_t)speed; + } + + /* configure the eight low port pins with GPIO_CTL0 */ + for(i = 0U;i < 8U;i++){ + if((1U << i) & pin){ + reg = GPIO_CTL0(gpio_periph); + + /* clear the specified pin mode bits */ + reg &= ~GPIO_MODE_MASK(i); + /* set the specified pin mode bits */ + reg |= GPIO_MODE_SET(i, temp_mode); + + /* set IPD or IPU */ + if(GPIO_MODE_IPD == mode){ + /* reset the corresponding OCTL bit */ + GPIO_BC(gpio_periph) = (uint32_t)((1U << i) & pin); + }else{ + /* set the corresponding OCTL bit */ + if(GPIO_MODE_IPU == mode){ + GPIO_BOP(gpio_periph) = (uint32_t)((1U << i) & pin); + } + } + /* set GPIO_CTL0 register */ + GPIO_CTL0(gpio_periph) = reg; + } + } + /* configure the eight high port pins with GPIO_CTL1 */ + for(i = 8U;i < 16U;i++){ + if((1U << i) & pin){ + reg = GPIO_CTL1(gpio_periph); + + /* clear the specified pin mode bits */ + reg &= ~GPIO_MODE_MASK(i - 8U); + /* set the specified pin mode bits */ + reg |= GPIO_MODE_SET(i - 8U, temp_mode); + + /* set IPD or IPU */ + if(GPIO_MODE_IPD == mode){ + /* reset the corresponding OCTL bit */ + GPIO_BC(gpio_periph) = (uint32_t)((1U << i) & pin); + }else{ + /* set the corresponding OCTL bit */ + if(GPIO_MODE_IPU == mode){ + GPIO_BOP(gpio_periph) = (uint32_t)((1U << i) & pin); + } + } + /* set GPIO_CTL1 register */ + GPIO_CTL1(gpio_periph) = reg; + } + } +} + +/*! + \brief set GPIO pin + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] pin: GPIO pin + one or more parameters can be selected which are shown as below: + \arg GPIO_PIN_x(x=0..15), GPIO_PIN_ALL + \param[out] none + \retval none +*/ +void gpio_bit_set(uint32_t gpio_periph, uint32_t pin) +{ + GPIO_BOP(gpio_periph) = (uint32_t)pin; +} + +/*! + \brief reset GPIO pin + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] pin: GPIO pin + one or more parameters can be selected which are shown as below: + \arg GPIO_PIN_x(x=0..15), GPIO_PIN_ALL + \param[out] none + \retval none +*/ +void gpio_bit_reset(uint32_t gpio_periph, uint32_t pin) +{ + GPIO_BC(gpio_periph) = (uint32_t)pin; +} + +/*! + \brief write data to the specified GPIO pin + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] pin: GPIO pin + one or more parameters can be selected which are shown as below: + \arg GPIO_PIN_x(x=0..15), GPIO_PIN_ALL + \param[in] bit_value: SET or RESET + \arg RESET: clear the port pin + \arg SET: set the port pin + \param[out] none + \retval none +*/ +void gpio_bit_write(uint32_t gpio_periph, uint32_t pin, bit_status bit_value) +{ + if(RESET != bit_value){ + GPIO_BOP(gpio_periph) = (uint32_t)pin; + }else{ + GPIO_BC(gpio_periph) = (uint32_t)pin; + } +} + +/*! + \brief write data to the specified GPIO port + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] data: specify the value to be written to the port output data register + \param[out] none + \retval none +*/ +void gpio_port_write(uint32_t gpio_periph,uint16_t data) +{ + GPIO_OCTL(gpio_periph) = (uint32_t)data; +} + +/*! + \brief get GPIO pin input status + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] pin: GPIO pin + only one parameter can be selected which are shown as below: + \arg GPIO_PIN_x(x=0..15), GPIO_PIN_ALL + \param[out] none + \retval input status of gpio pin: SET or RESET +*/ +FlagStatus gpio_input_bit_get(uint32_t gpio_periph,uint32_t pin) +{ + if((uint32_t)RESET != (GPIO_ISTAT(gpio_periph)&(pin))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief get GPIO port input status + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[out] none + \retval input status of gpio all pins +*/ +uint16_t gpio_input_port_get(uint32_t gpio_periph) +{ + return (uint16_t)(GPIO_ISTAT(gpio_periph)); +} + +/*! + \brief get GPIO pin output status + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] pin: GPIO pin + only one parameter can be selected which are shown as below: + \arg GPIO_PIN_x(x=0..15), GPIO_PIN_ALL + \param[out] none + \retval output status of gpio pin: SET or RESET +*/ +FlagStatus gpio_output_bit_get(uint32_t gpio_periph, uint32_t pin) +{ + if((uint32_t)RESET !=(GPIO_OCTL(gpio_periph)&(pin))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief get GPIO port output status + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[out] none + \retval output status of gpio all pins +*/ +uint16_t gpio_output_port_get(uint32_t gpio_periph) +{ + return ((uint16_t)GPIO_OCTL(gpio_periph)); +} + +/*! + \brief configure GPIO pin remap + \param[in] gpio_remap: select the pin to remap + \arg GPIO_SPI0_REMAP: SPI0 remapping + \arg GPIO_I2C0_REMAP: I2C0 remapping + \arg GPIO_USART0_REMAP: USART0 remapping + \arg GPIO_USART1_REMAP: USART1 remapping + \arg GPIO_USART2_PARTIAL_REMAP: USART2 partial remapping + \arg GPIO_USART2_FULL_REMAP: USART2 full remapping + \arg GPIO_TIMER0_PARTIAL_REMAP: TIMER0 partial remapping + \arg GPIO_TIMER0_FULL_REMAP: TIMER0 full remapping + \arg GPIO_TIMER1_PARTIAL_REMAP1: TIMER1 partial remapping + \arg GPIO_TIMER1_PARTIAL_REMAP2: TIMER1 partial remapping + \arg GPIO_TIMER1_FULL_REMAP: TIMER1 full remapping + \arg GPIO_TIMER2_PARTIAL_REMAP: TIMER2 partial remapping + \arg GPIO_TIMER2_FULL_REMAP: TIMER2 full remapping + \arg GPIO_TIMER3_REMAP: TIMER3 remapping + \arg GPIO_CAN_PARTIAL_REMAP: CAN partial remapping(only for GD32F10X_MD, GD32F10X_HD devices and GD32F10X_XD devices) + \arg GPIO_CAN_FULL_REMAP: CAN full remapping(only for GD32F10X_MD, GD32F10X_HD devices and GD32F10X_XD devices) + \arg GPIO_CAN0_PARTIAL_REMAP: CAN0 partial remapping(only for GD32F10X_CL devices) + \arg GPIO_CAN0_FULL_REMAP: CAN0 full remapping(only for GD32F10X_CL devices) + \arg GPIO_PD01_REMAP: PD01 remapping + \arg GPIO_TIMER4CH3_IREMAP: TIMER4 channel3 internal remapping(only for GD32F10X_CL devices and GD32F10X_HD devices) + \arg GPIO_ADC0_ETRGINS_REMAP: ADC0 external trigger inserted conversion remapping(only for GD32F10X_MD, GD32F10X_HD devices and GD32F10X_XD devices) + \arg GPIO_ADC0_ETRGREG_REMAP: ADC0 external trigger regular conversion remapping(only for GD32F10X_MD, GD32F10X_HD devices and GD32F10X_XD devices) + \arg GPIO_ADC1_ETRGINS_REMAP: ADC1 external trigger inserted conversion remapping(only for GD32F10X_MD, GD32F10X_HD devices and GD32F10X_XD devices) + \arg GPIO_ADC1_ETRGREG_REMAP: ADC1 external trigger regular conversion remapping(only for GD32F10X_MD, GD32F10X_HD devices and GD32F10X_XD devices) + \arg GPIO_ENET_REMAP: ENET remapping(only for GD32F10X_CL devices) + \arg GPIO_CAN1_REMAP: CAN1 remapping(only for GD32F10X_CL devices) + \arg GPIO_SWJ_NONJTRST_REMAP: full SWJ(JTAG-DP + SW-DP),but without NJTRST + \arg GPIO_SWJ_SWDPENABLE_REMAP: JTAG-DP disabled and SW-DP enabled + \arg GPIO_SWJ_DISABLE_REMAP: JTAG-DP disabled and SW-DP disabled + \arg GPIO_SPI2_REMAP: SPI2 remapping(only for GD32F10X_CL devices) + \arg GPIO_TIMER1ITI1_REMAP: TIMER1 internal trigger 1 remapping(only for GD32F10X_CL devices) + \arg GPIO_PTP_PPS_REMAP: ethernet PTP PPS remapping(only for GD32F10X_CL devices) + \arg GPIO_TIMER8_REMAP: TIMER8 remapping + \arg GPIO_TIMER9_REMAP: TIMER9 remapping + \arg GPIO_TIMER10_REMAP: TIMER10 remapping + \arg GPIO_TIMER12_REMAP: TIMER12 remapping + \arg GPIO_TIMER13_REMAP: TIMER13 remapping + \arg GPIO_EXMC_NADV_REMAP: EXMC_NADV connect/disconnect + \param[in] newvalue: ENABLE or DISABLE + \param[out] none + \retval none +*/ +void gpio_pin_remap_config(uint32_t remap, ControlStatus newvalue) +{ + uint32_t remap1 = 0U, remap2 = 0U, temp_reg = 0U, temp_mask = 0U; + + if(AFIO_PCF1_FIELDS == (remap & AFIO_PCF1_FIELDS)){ + /* get AFIO_PCF1 regiter value */ + temp_reg = AFIO_PCF1; + }else{ + /* get AFIO_PCF0 regiter value */ + temp_reg = AFIO_PCF0; + } + + temp_mask = (remap & PCF_POSITION_MASK) >> 0x10U; + remap1 = remap & LSB_16BIT_MASK; + + /* judge pin remap type */ + if((PCF_LOCATION1_MASK | PCF_LOCATION2_MASK) == (remap & (PCF_LOCATION1_MASK | PCF_LOCATION2_MASK))){ + temp_reg &= PCF_SWJCFG_MASK; + AFIO_PCF0 &= PCF_SWJCFG_MASK; + }else if(PCF_LOCATION2_MASK == (remap & PCF_LOCATION2_MASK)){ + remap2 = ((uint32_t)0x03U) << temp_mask; + temp_reg &= ~remap2; + temp_reg |= ~PCF_SWJCFG_MASK; + }else{ + temp_reg &= ~(remap1 << ((remap >> 0x15U)*0x10U)); + temp_reg |= ~PCF_SWJCFG_MASK; + } + + /* set pin remap value */ + if(DISABLE != newvalue){ + temp_reg |= (remap1 << ((remap >> 0x15U)*0x10U)); + } + + if(AFIO_PCF1_FIELDS == (remap & AFIO_PCF1_FIELDS)){ + /* set AFIO_PCF1 regiter value */ + AFIO_PCF1 = temp_reg; + }else{ + /* set AFIO_PCF0 regiter value */ + AFIO_PCF0 = temp_reg; + } +} + +/*! + \brief select GPIO pin exti sources + \param[in] gpio_outputport: gpio event output port + \arg GPIO_PORT_SOURCE_GPIOA: output port source A + \arg GPIO_PORT_SOURCE_GPIOB: output port source B + \arg GPIO_PORT_SOURCE_GPIOC: output port source C + \arg GPIO_PORT_SOURCE_GPIOD: output port source D + \arg GPIO_PORT_SOURCE_GPIOE: output port source E + \arg GPIO_PORT_SOURCE_GPIOF: output port source F + \arg GPIO_PORT_SOURCE_GPIOG: output port source G + \param[in] gpio_outputpin: GPIO_PIN_SOURCE_x(x=0..15) + \param[out] none + \retval none +*/ +void gpio_exti_source_select(uint8_t output_port, uint8_t output_pin) +{ + uint32_t source = 0U; + source = ((uint32_t)0x0FU) << (AFIO_EXTI_SOURCE_FIELDS * (output_pin & AFIO_EXTI_SOURCE_MASK)); + + /* select EXTI sources */ + if(GPIO_PIN_SOURCE_4 > output_pin){ + /* select EXTI0/EXTI1/EXTI2/EXTI3 */ + AFIO_EXTISS0 &= ~source; + AFIO_EXTISS0 |= (((uint32_t)output_port) << (AFIO_EXTI_SOURCE_FIELDS * (output_pin & AFIO_EXTI_SOURCE_MASK))); + }else if(GPIO_PIN_SOURCE_8 > output_pin){ + /* select EXTI4/EXTI5/EXTI6/EXTI7 */ + AFIO_EXTISS1 &= ~source; + AFIO_EXTISS1 |= (((uint32_t)output_port) << (AFIO_EXTI_SOURCE_FIELDS * (output_pin & AFIO_EXTI_SOURCE_MASK))); + }else if(GPIO_PIN_SOURCE_12 > output_pin){ + /* select EXTI8/EXTI9/EXTI10/EXTI11 */ + AFIO_EXTISS2 &= ~source; + AFIO_EXTISS2 |= (((uint32_t)output_port) << (AFIO_EXTI_SOURCE_FIELDS * (output_pin & AFIO_EXTI_SOURCE_MASK))); + }else{ + /* select EXTI12/EXTI13/EXTI14/EXTI15 */ + AFIO_EXTISS3 &= ~source; + AFIO_EXTISS3 |= (((uint32_t)output_port) << (AFIO_EXTI_SOURCE_FIELDS * (output_pin & AFIO_EXTI_SOURCE_MASK))); + } +} + +/*! + \brief configure GPIO pin event output + \param[in] output_port: gpio event output port + only one parameter can be selected which are shown as below: + \arg GPIO_EVENT_PORT_GPIOA: event output port A + \arg GPIO_EVENT_PORT_GPIOB: event output port B + \arg GPIO_EVENT_PORT_GPIOC: event output port C + \arg GPIO_EVENT_PORT_GPIOD: event output port D + \arg GPIO_EVENT_PORT_GPIOE: event output port E + \arg GPIO_EVENT_PORT_GPIOE: event output port F + \arg GPIO_EVENT_PORT_GPIOE: event output port G + \param[in] output_pin: + only one parameter can be selected which are shown as below: + \arg GPIO_EVENT_PIN_x(x=0..15) + \param[out] none + \retval none +*/ +void gpio_event_output_config(uint8_t output_port, uint8_t output_pin) +{ + uint32_t reg = 0U; + reg = AFIO_EC; + + /* clear AFIO_EC_PORT and AFIO_EC_PIN bits */ + reg &= (uint32_t)(~(AFIO_EC_PORT|AFIO_EC_PIN)); + + reg |= (uint32_t)((uint32_t)output_port << GPIO_OUTPUT_PORT_OFFSET); + reg |= (uint32_t)output_pin; + + AFIO_EC = reg; +} + +/*! + \brief enable GPIO pin event output + \param[in] none + \param[out] none + \retval none +*/ +void gpio_event_output_enable(void) +{ + AFIO_EC |= AFIO_EC_EOE; +} + +/*! + \brief disable GPIO pin event output + \param[in] none + \param[out] none + \retval none +*/ +void gpio_event_output_disable(void) +{ + AFIO_EC &= (uint32_t)(~AFIO_EC_EOE); +} + +/*! + \brief lock GPIO pin + \param[in] gpio_periph: GPIOx(x = A,B,C,D,E,F,G) + \param[in] pin: GPIO pin + one or more parameters can be selected which are shown as below: + \arg GPIO_PIN_x(x=0..15), GPIO_PIN_ALL + \param[out] none + \retval none +*/ +void gpio_pin_lock(uint32_t gpio_periph, uint32_t pin) +{ + uint32_t lock = 0x00010000U; + lock |= pin; + + /* lock key writing sequence: write 1 -> write 0 -> write 1 -> read 0 -> read 1 */ + GPIO_LOCK(gpio_periph) = (uint32_t)lock; + GPIO_LOCK(gpio_periph) = (uint32_t)pin; + GPIO_LOCK(gpio_periph) = (uint32_t)lock; + lock = GPIO_LOCK(gpio_periph); + lock = GPIO_LOCK(gpio_periph); +} + +#ifdef GD32F10X_CL +/*! + \brief select ethernet MII or RMII PHY + \param[in] gpio_enetsel: ethernet MII or RMII PHY selection + \arg GPIO_ENET_PHY_MII: configure ethernet MAC for connection with an MII PHY + \arg GPIO_ENET_PHY_RMII: configure ethernet MAC for connection with an RMII PHY + \param[out] none + \retval none +*/ +void gpio_ethernet_phy_select(uint32_t gpio_enetsel) +{ + /* clear AFIO_PCF0_ENET_PHY_SEL bit */ + AFIO_PCF0 &= (uint32_t)(~AFIO_PCF0_ENET_PHY_SEL); + + /* select MII or RMII PHY */ + AFIO_PCF0 |= (uint32_t)gpio_enetsel; +} +#endif diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_i2c.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_i2c.c new file mode 100644 index 0000000000000000000000000000000000000000..fa1ae96d23efb8f39aaabc374981878d09ef3182 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_i2c.c @@ -0,0 +1,707 @@ +/*! + \file gd32f10x_i2c.c + \brief I2C driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_i2c.h" + +/* I2C register bit mask */ +#define I2CCLK_MAX ((uint32_t)0x0000003FU) /*!< i2cclk maximum value */ +#define I2CCLK_MIN ((uint32_t)0x00000002U) /*!< i2cclk minimum value */ +#define I2C_FLAG_MASK ((uint32_t)0x0000FFFFU) /*!< i2c flag mask */ +#define I2C_ADDRESS_MASK ((uint32_t)0x000003FFU) /*!< i2c address mask */ + +/* I2C register bit offset */ +#define STAT1_PECV_OFFSET ((uint32_t)8U) /* bit offset of PECV in I2C_STAT1 */ + +/*! + \brief reset I2C + \param[in] i2c_periph: I2Cx(x=0,1) + \param[out] none + \retval none +*/ +void i2c_deinit(uint32_t i2c_periph) +{ + switch(i2c_periph){ + case I2C0: + /* reset I2C0 */ + rcu_periph_reset_enable(RCU_I2C0RST); + rcu_periph_reset_disable(RCU_I2C0RST); + break; + case I2C1: + /* reset I2C1 */ + rcu_periph_reset_enable(RCU_I2C1RST); + rcu_periph_reset_disable(RCU_I2C1RST); + break; + default: + break; + } +} + +/*! + \brief configure I2C clock + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] clkspeed: I2C clock speed, supports standard mode (up to 100 kHz), fast mode (up to 400 kHz) + \param[in] dutycyc: duty cycle in fast mode + only one parameter can be selected which is shown as below: + \arg I2C_DTCY_2: T_low/T_high=2 + \arg I2C_DTCY_16_9: T_low/T_high=16/9 + \param[out] none + \retval none +*/ +void i2c_clock_config(uint32_t i2c_periph, uint32_t clkspeed, uint32_t dutycyc) +{ + uint32_t pclk1, clkc, freq, risetime; + uint32_t temp; + + pclk1 = rcu_clock_freq_get(CK_APB1); + /* I2C peripheral clock frequency */ + freq = (uint32_t)(pclk1/1000000U); + if(freq >= I2CCLK_MAX){ + freq = I2CCLK_MAX; + } + temp = I2C_CTL1(i2c_periph); + temp &= ~I2C_CTL1_I2CCLK; + temp |= freq; + + I2C_CTL1(i2c_periph) = temp; + + if(100000U >= clkspeed){ + /* the maximum SCL rise time is 1000ns in standard mode */ + risetime = (uint32_t)((pclk1/1000000U)+1U); + if(risetime >= I2CCLK_MAX){ + I2C_RT(i2c_periph) = I2CCLK_MAX; + }else if(risetime <= I2CCLK_MIN){ + I2C_RT(i2c_periph) = I2CCLK_MIN; + }else{ + I2C_RT(i2c_periph) = risetime; + } + clkc = (uint32_t)(pclk1/(clkspeed*2U)); + if(clkc < 0x04U){ + /* the CLKC in standard mode minmum value is 4 */ + clkc = 0x04U; + } + I2C_CKCFG(i2c_periph) |= (I2C_CKCFG_CLKC & clkc); + + }else if(400000U >= clkspeed){ + /* the maximum SCL rise time is 300ns in fast mode */ + I2C_RT(i2c_periph) = (uint32_t)(((freq*(uint32_t)300U)/(uint32_t)1000U)+(uint32_t)1U); + if(I2C_DTCY_2 == dutycyc){ + /* I2C duty cycle is 2 */ + clkc = (uint32_t)(pclk1/(clkspeed*3U)); + I2C_CKCFG(i2c_periph) &= ~I2C_CKCFG_DTCY; + }else{ + /* I2C duty cycle is 16/9 */ + clkc = (uint32_t)(pclk1/(clkspeed*25U)); + I2C_CKCFG(i2c_periph) |= I2C_CKCFG_DTCY; + } + if(0U == (clkc & I2C_CKCFG_CLKC)){ + /* the CLKC in fast mode minmum value is 1 */ + clkc |= 0x0001U; + } + I2C_CKCFG(i2c_periph) |= I2C_CKCFG_FAST; + I2C_CKCFG(i2c_periph) |= clkc; + }else{ + } +} + +/*! + \brief configure I2C address + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] mode: + only one parameter can be selected which is shown as below: + \arg I2C_I2CMODE_ENABLE: I2C mode + \arg I2C_SMBUSMODE_ENABLE: SMBus mode + \param[in] addformat: 7bits or 10bits + only one parameter can be selected which is shown as below: + \arg I2C_ADDFORMAT_7BITS: 7bits + \arg I2C_ADDFORMAT_10BITS: 10bits + \param[in] addr: I2C address + \param[out] none + \retval none +*/ +void i2c_mode_addr_config(uint32_t i2c_periph, uint32_t mode, uint32_t addformat, uint32_t addr) +{ + /* SMBus/I2C mode selected */ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_SMBEN); + ctl |= mode; + I2C_CTL0(i2c_periph) = ctl; + /* configure address */ + addr = addr & I2C_ADDRESS_MASK; + I2C_SADDR0(i2c_periph) = (addformat | addr); +} + +/*! + \brief SMBus type selection + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] type: + only one parameter can be selected which is shown as below: + \arg I2C_SMBUS_DEVICE: device + \arg I2C_SMBUS_HOST: host + \param[out] none + \retval none +*/ +void i2c_smbus_type_config(uint32_t i2c_periph, uint32_t type) +{ + if(I2C_SMBUS_HOST == type){ + I2C_CTL0(i2c_periph) |= I2C_CTL0_SMBSEL; + }else{ + I2C_CTL0(i2c_periph) &= ~(I2C_CTL0_SMBSEL); + } +} + +/*! + \brief whether or not to send an ACK + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] ack: + only one parameter can be selected which is shown as below: + \arg I2C_ACK_ENABLE: ACK will be sent + \arg I2C_ACK_DISABLE: ACK will not be sent + \param[out] none + \retval none +*/ +void i2c_ack_config(uint32_t i2c_periph, uint32_t ack) +{ + if(I2C_ACK_ENABLE == ack){ + I2C_CTL0(i2c_periph) |= I2C_CTL0_ACKEN; + }else{ + I2C_CTL0(i2c_periph) &= ~(I2C_CTL0_ACKEN); + } +} + +/*! + \brief configure I2C POAP position + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] pos: + only one parameter can be selected which is shown as below: + \arg I2C_ACKPOS_CURRENT: whether to send ACK or not for the current + \arg I2C_ACKPOS_NEXT: whether to send ACK or not for the next byte + \param[out] none + \retval none +*/ +void i2c_ackpos_config(uint32_t i2c_periph, uint32_t pos) +{ + /* configure I2C POAP position */ + if(I2C_ACKPOS_NEXT == pos){ + I2C_CTL0(i2c_periph) |= I2C_CTL0_POAP; + }else{ + I2C_CTL0(i2c_periph) &= ~(I2C_CTL0_POAP); + } +} + +/*! + \brief master sends slave address + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] addr: slave address + \param[in] trandirection: transmitter or receiver + only one parameter can be selected which is shown as below: + \arg I2C_TRANSMITTER: transmitter + \arg I2C_RECEIVER: receiver + \param[out] none + \retval none +*/ +void i2c_master_addressing(uint32_t i2c_periph, uint32_t addr, uint32_t trandirection) +{ + /* master is a transmitter or a receiver */ + if(I2C_TRANSMITTER == trandirection){ + addr = addr & I2C_TRANSMITTER; + }else{ + addr = addr | I2C_RECEIVER; + } + /* send slave address */ + I2C_DATA(i2c_periph) = addr; +} + +/*! + \brief dual-address mode switch + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] dualaddr: + only one parameter can be selected which is shown as below: + \arg I2C_DUADEN_DISABLE: disable dual-address mode + \arg I2C_DUADEN_ENABLE: enable dual-address mode + \param[out] none + \retval none +*/ +void i2c_dualaddr_enable(uint32_t i2c_periph, uint32_t dualaddr) +{ + if(I2C_DUADEN_ENABLE == dualaddr){ + I2C_SADDR1(i2c_periph) |= I2C_SADDR1_DUADEN; + }else{ + I2C_SADDR1(i2c_periph) &= ~(I2C_SADDR1_DUADEN); + } +} + +/*! + \brief enable I2C + \param[in] i2c_periph: I2Cx(x=0,1) + \param[out] none + \retval none +*/ +void i2c_enable(uint32_t i2c_periph) +{ + I2C_CTL0(i2c_periph) |= I2C_CTL0_I2CEN; +} + +/*! + \brief disable I2C + \param[in] i2c_periph: I2Cx(x=0,1) + \param[out] none + \retval none +*/ +void i2c_disable(uint32_t i2c_periph) +{ + I2C_CTL0(i2c_periph) &= ~(I2C_CTL0_I2CEN); +} + +/*! + \brief generate a START condition on I2C bus + \param[in] i2c_periph: I2Cx(x=0,1) + \param[out] none + \retval none +*/ +void i2c_start_on_bus(uint32_t i2c_periph) +{ + I2C_CTL0(i2c_periph) |= I2C_CTL0_START; +} + +/*! + \brief generate a STOP condition on I2C bus + \param[in] i2c_periph: I2Cx(x=0,1) + \param[out] none + \retval none +*/ +void i2c_stop_on_bus(uint32_t i2c_periph) +{ + I2C_CTL0(i2c_periph) |= I2C_CTL0_STOP; +} + +/*! + \brief I2C transmit data function + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] data: data of transmission + \param[out] none + \retval none +*/ +void i2c_data_transmit(uint32_t i2c_periph, uint8_t data) +{ + I2C_DATA(i2c_periph) = DATA_TRANS(data); +} + +/*! + \brief I2C receive data function + \param[in] i2c_periph: I2Cx(x=0,1) + \param[out] none + \retval data of received +*/ +uint8_t i2c_data_receive(uint32_t i2c_periph) +{ + return (uint8_t)DATA_RECV(I2C_DATA(i2c_periph)); +} + +/*! + \brief enable I2C DMA mode + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] dmastate: + only one parameter can be selected which is shown as below: + \arg I2C_DMA_ON: DMA mode enable + \arg I2C_DMA_OFF: DMA mode disable + \param[out] none + \retval none +*/ +void i2c_dma_enable(uint32_t i2c_periph, uint32_t dmastate) +{ + /* configure I2C DMA function */ + uint32_t ctl = 0U; + + ctl = I2C_CTL1(i2c_periph); + ctl &= ~(I2C_CTL1_DMAON); + ctl |= dmastate; + I2C_CTL1(i2c_periph) = ctl; +} + +/*! + \brief configure whether next DMA EOT is DMA last transfer or not + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] dmalast: + only one parameter can be selected which is shown as below: + \arg I2C_DMALST_ON: next DMA EOT is the last transfer + \arg I2C_DMALST_OFF: next DMA EOT is not the last transfer + \param[out] none + \retval none +*/ +void i2c_dma_last_transfer_config(uint32_t i2c_periph, uint32_t dmalast) +{ + /* configure DMA last transfer */ + uint32_t ctl = 0U; + + ctl = I2C_CTL1(i2c_periph); + ctl &= ~(I2C_CTL1_DMALST); + ctl |= dmalast; + I2C_CTL1(i2c_periph) = ctl; +} + +/*! + \brief whether to stretch SCL low when data is not ready in slave mode + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] stretchpara: + only one parameter can be selected which is shown as below: + \arg I2C_SCLSTRETCH_ENABLE: SCL stretching is enabled + \arg I2C_SCLSTRETCH_DISABLE: SCL stretching is disabled + \param[out] none + \retval none +*/ +void i2c_stretch_scl_low_config(uint32_t i2c_periph, uint32_t stretchpara) +{ + /* configure I2C SCL strerching enable or disable */ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_DISSTRC); + ctl |= stretchpara; + I2C_CTL0(i2c_periph) = ctl; +} + +/*! + \brief whether or not to response to a general call + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] gcallpara: + only one parameter can be selected which is shown as below: + \arg I2C_GCEN_ENABLE: slave will response to a general call + \arg I2C_GCEN_DISABLE: slave will not response to a general call + \param[out] none + \retval none +*/ +void i2c_slave_response_to_gcall_config(uint32_t i2c_periph, uint32_t gcallpara) +{ + /* configure slave response to a general call enable or disable */ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_GCEN); + ctl |= gcallpara; + I2C_CTL0(i2c_periph) = ctl; +} + +/*! + \brief software reset I2C + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] sreset: + only one parameter can be selected which is shown as below: + \arg I2C_SRESET_SET: I2C is under reset + \arg I2C_SRESET_RESET: I2C is not under reset + \param[out] none + \retval none +*/ +void i2c_software_reset_config(uint32_t i2c_periph, uint32_t sreset) +{ + /* modify CTL0 and configure software reset I2C state */ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_SRESET); + ctl |= sreset; + I2C_CTL0(i2c_periph) = ctl; +} + +/*! + \brief I2C PEC calculation on or off + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] pecpara: + only one parameter can be selected which is shown as below: + \arg I2C_PEC_ENABLE: PEC calculation on + \arg I2C_PEC_DISABLE: PEC calculation off + \param[out] none + \retval none +*/ +void i2c_pec_enable(uint32_t i2c_periph, uint32_t pecstate) +{ + /* on/off PEC calculation */ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_PECEN); + ctl |= pecstate; + I2C_CTL0(i2c_periph) = ctl; +} + +/*! + \brief I2C whether to transfer PEC value + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] pecpara: + only one parameter can be selected which is shown as below: + \arg I2C_PECTRANS_ENABLE: transfer PEC + \arg I2C_PECTRANS_DISABLE: not transfer PEC + \param[out] none + \retval none +*/ +void i2c_pec_transfer_enable(uint32_t i2c_periph, uint32_t pecpara) +{ + /* whether to transfer PEC */ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_PECTRANS); + ctl |= pecpara; + I2C_CTL0(i2c_periph) = ctl; +} + +/*! + \brief get packet error checking value + \param[in] i2c_periph: I2Cx(x=0,1) + \param[out] none + \retval PEC value +*/ +uint8_t i2c_pec_value_get(uint32_t i2c_periph) +{ + return (uint8_t)((I2C_STAT1(i2c_periph) &I2C_STAT1_ECV)>>STAT1_PECV_OFFSET); +} + +/*! + \brief I2C issue alert through SMBA pin + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] smbuspara: + only one parameter can be selected which is shown as below: + \arg I2C_SALTSEND_ENABLE: issue alert through SMBA pin + \arg I2C_SALTSEND_DISABLE: not issue alert through SMBA pin + \param[out] none + \retval none +*/ +void i2c_smbus_issue_alert(uint32_t i2c_periph, uint32_t smbuspara) +{ + /* issue alert through SMBA pin configure*/ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_SALT); + ctl |= smbuspara; + I2C_CTL0(i2c_periph) = ctl; +} + +/*! + \brief enable or disable I2C ARP protocol in SMBus switch + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] arpstate: + only one parameter can be selected which is shown as below: + \arg I2C_ARP_ENABLE: enable ARP + \arg I2C_ARP_DISABLE: disable ARP + \param[out] none + \retval none +*/ +void i2c_smbus_arp_enable(uint32_t i2c_periph, uint32_t arpstate) +{ + /* enable or disable I2C ARP protocol*/ + uint32_t ctl = 0U; + + ctl = I2C_CTL0(i2c_periph); + ctl &= ~(I2C_CTL0_ARPEN); + ctl |= arpstate; + I2C_CTL0(i2c_periph) = ctl; +} + +/*! + \brief check I2C flag is set or not + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] flag: I2C flags, refer to i2c_flag_enum + only one parameter can be selected which is shown as below: + \arg I2C_FLAG_SBSEND: start condition send out + \arg I2C_FLAG_ADDSEND: address is sent in master mode or received and matches in slave mode + \arg I2C_FLAG_BTC: byte transmission finishes + \arg I2C_FLAG_ADD10SEND: header of 10-bit address is sent in master mode + \arg I2C_FLAG_STPDET: stop condition detected in slave mode + \arg I2C_FLAG_RBNE: I2C_DATA is not Empty during receiving + \arg I2C_FLAG_TBE: I2C_DATA is empty during transmitting + \arg I2C_FLAG_BERR: a bus error occurs indication a unexpected start or stop condition on I2C bus + \arg I2C_FLAG_LOSTARB: arbitration lost in master mode + \arg I2C_FLAG_AERR: acknowledge error + \arg I2C_FLAG_OUERR: overrun or underrun situation occurs in slave mode + \arg I2C_FLAG_PECERR: PEC error when receiving data + \arg I2C_FLAG_SMBTO: timeout signal in SMBus mode + \arg I2C_FLAG_SMBALT: SMBus alert status + \arg I2C_FLAG_MASTER: a flag indicating whether I2C block is in master or slave mode + \arg I2C_FLAG_I2CBSY: busy flag + \arg I2C_FLAG_TRS: whether the I2C is a transmitter or a receiver + \arg I2C_FLAG_RXGC: general call address (00h) received + \arg I2C_FLAG_DEFSMB: default address of SMBus device + \arg I2C_FLAG_HSTSMB: SMBus host header detected in slave mode + \arg I2C_FLAG_DUMOD: dual flag in slave mode indicating which address is matched in dual-address mode + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus i2c_flag_get(uint32_t i2c_periph, i2c_flag_enum flag) +{ + if(RESET != (I2C_REG_VAL(i2c_periph, flag) & BIT(I2C_BIT_POS(flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear I2C flag + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] flag: I2C flags, refer to i2c_flag_enum + only one parameter can be selected which is shown as below: + \arg I2C_FLAG_SMBALT: SMBus Alert status + \arg I2C_FLAG_SMBTO: timeout signal in SMBus mode + \arg I2C_FLAG_PECERR: PEC error when receiving data + \arg I2C_FLAG_OUERR: over-run or under-run situation occurs in slave mode + \arg I2C_FLAG_AERR: acknowledge error + \arg I2C_FLAG_LOSTARB: arbitration lost in master mode + \arg I2C_FLAG_BERR: a bus error + \arg I2C_FLAG_ADDSEND: cleared by reading I2C_STAT0 and reading I2C_STAT1 + \param[out] none + \retval none +*/ +void i2c_flag_clear(uint32_t i2c_periph, i2c_flag_enum flag) +{ + if(I2C_FLAG_ADDSEND == flag){ + /* read I2C_STAT0 and then read I2C_STAT1 to clear ADDSEND */ + I2C_STAT0(i2c_periph); + I2C_STAT1(i2c_periph); + }else{ + I2C_REG_VAL(i2c_periph, flag) &= ~BIT(I2C_BIT_POS(flag)); + } +} + +/*! + \brief enable I2C interrupt + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] interrupt: I2C interrupts, refer to i2c_interrupt_enum + only one parameter can be selected which is shown as below: + \arg I2C_INT_ERR: error interrupt enable + \arg I2C_INT_EV: event interrupt enable + \arg I2C_INT_BUF: buffer interrupt enable + \param[out] none + \retval none +*/ +void i2c_interrupt_enable(uint32_t i2c_periph, i2c_interrupt_enum interrupt) +{ + I2C_REG_VAL(i2c_periph, interrupt) |= BIT(I2C_BIT_POS(interrupt)); +} + +/*! + \brief disable I2C interrupt + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] interrupt: I2C interrupts, refer to i2c_flag_enum + only one parameter can be selected which is shown as below: + \arg I2C_INT_ERR: error interrupt enable + \arg I2C_INT_EV: event interrupt enable + \arg I2C_INT_BUF: buffer interrupt enable + \param[out] none + \retval none +*/ +void i2c_interrupt_disable(uint32_t i2c_periph, i2c_interrupt_enum interrupt) +{ + I2C_REG_VAL(i2c_periph, interrupt) &= ~BIT(I2C_BIT_POS(interrupt)); +} + +/*! + \brief check I2C interrupt flag + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] int_flag: I2C interrupt flags, refer to i2c_interrupt_flag_enum + only one parameter can be selected which is shown as below: + \arg I2C_INT_FLAG_SBSEND: start condition sent out in master mode interrupt flag + \arg I2C_INT_FLAG_ADDSEND: address is sent in master mode or received and matches in slave mode interrupt flag + \arg I2C_INT_FLAG_BTC: byte transmission finishes + \arg I2C_INT_FLAG_ADD10SEND: header of 10-bit address is sent in master mode interrupt flag + \arg I2C_INT_FLAG_STPDET: etop condition detected in slave mode interrupt flag + \arg I2C_INT_FLAG_RBNE: I2C_DATA is not Empty during receiving interrupt flag + \arg I2C_INT_FLAG_TBE: I2C_DATA is empty during transmitting interrupt flag + \arg I2C_INT_FLAG_BERR: a bus error occurs indication a unexpected start or stop condition on I2C bus interrupt flag + \arg I2C_INT_FLAG_LOSTARB: arbitration lost in master mode interrupt flag + \arg I2C_INT_FLAG_AERR: acknowledge error interrupt flag + \arg I2C_INT_FLAG_OUERR: over-run or under-run situation occurs in slave mode interrupt flag + \arg I2C_INT_FLAG_PECERR: PEC error when receiving data interrupt flag + \arg I2C_INT_FLAG_SMBTO: timeout signal in SMBus mode interrupt flag + \arg I2C_INT_FLAG_SMBALT: SMBus Alert status interrupt flag + \param[out] none + \retval none +*/ +FlagStatus i2c_interrupt_flag_get(uint32_t i2c_periph, i2c_interrupt_flag_enum int_flag) +{ + uint32_t intenable = 0U, flagstatus = 0U, bufie; + + /* check BUFIE */ + bufie = I2C_CTL1(i2c_periph)&I2C_CTL1_BUFIE; + + /* get the interrupt enable bit status */ + intenable = (I2C_REG_VAL(i2c_periph, int_flag) & BIT(I2C_BIT_POS(int_flag))); + /* get the corresponding flag bit status */ + flagstatus = (I2C_REG_VAL2(i2c_periph, int_flag) & BIT(I2C_BIT_POS2(int_flag))); + + if((I2C_INT_FLAG_RBNE == int_flag) || (I2C_INT_FLAG_TBE == int_flag)){ + if(intenable && bufie){ + intenable = 1U; + }else{ + intenable = 0U; + } + } + if((0U != flagstatus) && (0U != intenable)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear I2C interrupt flag + \param[in] i2c_periph: I2Cx(x=0,1) + \param[in] intflag: I2C interrupt flags, refer to i2c_interrupt_flag_enum + only one parameter can be selected which is shown as below: + \arg I2C_INT_FLAG_ADDSEND: address is sent in master mode or received and matches in slave mode interrupt flag + \arg I2C_INT_FLAG_BERR: a bus error occurs indication a unexpected start or stop condition on I2C bus interrupt flag + \arg I2C_INT_FLAG_LOSTARB: arbitration lost in master mode interrupt flag + \arg I2C_INT_FLAG_AERR: acknowledge error interrupt flag + \arg I2C_INT_FLAG_OUERR: over-run or under-run situation occurs in slave mode interrupt flag + \arg I2C_INT_FLAG_PECERR: PEC error when receiving data interrupt flag + \arg I2C_INT_FLAG_SMBTO: timeout signal in SMBus mode interrupt flag + \arg I2C_INT_FLAG_SMBALT: SMBus Alert status interrupt flag + \param[out] none + \retval none +*/ +void i2c_interrupt_flag_clear(uint32_t i2c_periph, i2c_interrupt_flag_enum int_flag) +{ + if(I2C_INT_FLAG_ADDSEND == int_flag){ + /* read I2C_STAT0 and then read I2C_STAT1 to clear ADDSEND */ + I2C_STAT0(i2c_periph); + I2C_STAT1(i2c_periph); + }else{ + I2C_REG_VAL2(i2c_periph, int_flag) &= ~BIT(I2C_BIT_POS2(int_flag)); + } +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_misc.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_misc.c new file mode 100644 index 0000000000000000000000000000000000000000..1a96627b3acb2b807aa18d522c5bf4d372430571 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_misc.c @@ -0,0 +1,187 @@ +/*! + \file gd32f10x_misc.c + \brief MISC driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_misc.h" + +/*! + \brief set the priority group + \param[in] nvic_prigroup: the NVIC priority group + \arg NVIC_PRIGROUP_PRE0_SUB4:0 bits for pre-emption priority 4 bits for subpriority + \arg NVIC_PRIGROUP_PRE1_SUB3:1 bits for pre-emption priority 3 bits for subpriority + \arg NVIC_PRIGROUP_PRE2_SUB2:2 bits for pre-emption priority 2 bits for subpriority + \arg NVIC_PRIGROUP_PRE3_SUB1:3 bits for pre-emption priority 1 bits for subpriority + \arg NVIC_PRIGROUP_PRE4_SUB0:4 bits for pre-emption priority 0 bits for subpriority + \param[out] none + \retval none +*/ +void nvic_priority_group_set(uint32_t nvic_prigroup) +{ + /* set the priority group value */ + SCB->AIRCR = NVIC_AIRCR_VECTKEY_MASK | nvic_prigroup; +} + +/*! + \brief enable NVIC request + \param[in] nvic_irq: the NVIC interrupt request, detailed in IRQn_Type + \param[in] nvic_irq_pre_priority: the pre-emption priority needed to set + \param[in] nvic_irq_sub_priority: the subpriority needed to set + \param[out] none + \retval none +*/ +void nvic_irq_enable(uint8_t nvic_irq, + uint8_t nvic_irq_pre_priority, + uint8_t nvic_irq_sub_priority) +{ + uint32_t temp_priority = 0x00U, temp_pre = 0x00U, temp_sub = 0x00U; + + /* use the priority group value to get the temp_pre and the temp_sub */ + switch ((SCB->AIRCR) & (uint32_t)0x700U) { + case NVIC_PRIGROUP_PRE0_SUB4: + temp_pre = 0U; + temp_sub = 0x4U; + break; + case NVIC_PRIGROUP_PRE1_SUB3: + temp_pre = 1U; + temp_sub = 0x3U; + break; + case NVIC_PRIGROUP_PRE2_SUB2: + temp_pre = 2U; + temp_sub = 0x2U; + break; + case NVIC_PRIGROUP_PRE3_SUB1: + temp_pre = 3U; + temp_sub = 0x1U; + break; + case NVIC_PRIGROUP_PRE4_SUB0: + temp_pre = 4U; + temp_sub = 0x0U; + break; + default: + nvic_priority_group_set(NVIC_PRIGROUP_PRE2_SUB2); + temp_pre = 2U; + temp_sub = 0x2U; + break; + } + + /* get the temp_priority to fill the NVIC->IP register */ + temp_priority = (uint32_t)nvic_irq_pre_priority << (0x4U - temp_pre); + temp_priority |= nvic_irq_sub_priority &(0x0FU >> (0x4U - temp_sub)); + temp_priority = temp_priority << 0x04U; + NVIC->IP[nvic_irq] = (uint8_t)temp_priority; + + /* enable the selected IRQ */ + NVIC->ISER[nvic_irq >> 0x05U] = (uint32_t)0x01U << (nvic_irq & (uint8_t)0x1FU); +} + +/*! + \brief disable NVIC request + \param[in] nvic_irq: the NVIC interrupt request, detailed in IRQn_Type + \param[out] none + \retval none +*/ +void nvic_irq_disable(uint8_t nvic_irq) +{ + /* disable the selected IRQ.*/ + NVIC->ICER[nvic_irq >> 0x05U] = (uint32_t)0x01U << (nvic_irq & (uint8_t)0x1FU); +} + +/*! + \brief set the NVIC vector table base address + \param[in] nvic_vict_tab: the RAM or FLASH base address + \arg NVIC_VECTTAB_RAM: RAM base address + \are NVIC_VECTTAB_FLASH: Flash base address + \param[in] offset: Vector Table offset + \param[out] none + \retval none +*/ +void nvic_vector_table_set(uint32_t nvic_vict_tab, uint32_t offset) +{ + SCB->VTOR = nvic_vict_tab | (offset & NVIC_VECTTAB_OFFSET_MASK); +} + +/*! + \brief set the state of the low power mode + \param[in] lowpower_mode: the low power mode state + \arg SCB_LPM_SLEEP_EXIT_ISR: if chose this para, the system always enter low power + mode by exiting from ISR + \arg SCB_LPM_DEEPSLEEP: if chose this para, the system will enter the DEEPSLEEP mode + \arg SCB_LPM_WAKE_BY_ALL_INT: if chose this para, the lowpower mode can be woke up + by all the enable and disable interrupts + \param[out] none + \retval none +*/ +void system_lowpower_set(uint8_t lowpower_mode) +{ + SCB->SCR |= (uint32_t)lowpower_mode; +} + +/*! + \brief reset the state of the low power mode + \param[in] lowpower_mode: the low power mode state + \arg SCB_LPM_SLEEP_EXIT_ISR: if chose this para, the system will exit low power + mode by exiting from ISR + \arg SCB_LPM_DEEPSLEEP: if chose this para, the system will enter the SLEEP mode + \arg SCB_LPM_WAKE_BY_ALL_INT: if chose this para, the lowpower mode only can be + woke up by the enable interrupts + \param[out] none + \retval none +*/ +void system_lowpower_reset(uint8_t lowpower_mode) +{ + SCB->SCR &= (~(uint32_t)lowpower_mode); +} + +/*! + \brief set the systick clock source + \param[in] systick_clksource: the systick clock source needed to choose + \arg SYSTICK_CLKSOURCE_HCLK: systick clock source is from HCLK + \arg SYSTICK_CLKSOURCE_HCLK_DIV8: systick clock source is from HCLK/8 + \param[out] none + \retval none +*/ + +void systick_clksource_set(uint32_t systick_clksource) +{ + if(SYSTICK_CLKSOURCE_HCLK == systick_clksource ){ + /* set the systick clock source from HCLK */ + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + }else{ + /* set the systick clock source from HCLK/8 */ + SysTick->CTRL &= SYSTICK_CLKSOURCE_HCLK_DIV8; + } +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_pmu.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_pmu.c new file mode 100644 index 0000000000000000000000000000000000000000..33052db8d1016106cd64ab438775cc543e296129 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_pmu.c @@ -0,0 +1,265 @@ +/*! + \file gd32f10x_pmu.c + \brief PMU driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_pmu.h" + +/*! + \brief reset PMU register + \param[in] none + \param[out] none + \retval none +*/ +void pmu_deinit(void) +{ + /* reset PMU */ + rcu_periph_reset_enable(RCU_PMURST); + rcu_periph_reset_disable(RCU_PMURST); +} + +/*! + \brief select low voltage detector threshold + \param[in] lvdt_n: + only one parameter can be selected which is shown as below: + \arg PMU_LVDT_0: voltage threshold is 2.2V + \arg PMU_LVDT_1: voltage threshold is 2.3V + \arg PMU_LVDT_2: voltage threshold is 2.4V + \arg PMU_LVDT_3: voltage threshold is 2.5V + \arg PMU_LVDT_4: voltage threshold is 2.6V + \arg PMU_LVDT_5: voltage threshold is 2.7V + \arg PMU_LVDT_6: voltage threshold is 2.8V + \arg PMU_LVDT_7: voltage threshold is 2.9V + \param[out] none + \retval none +*/ +void pmu_lvd_select(uint32_t lvdt_n) +{ + /* disable LVD */ + PMU_CTL &= ~PMU_CTL_LVDEN; + /* clear LVDT bits */ + PMU_CTL &= ~PMU_CTL_LVDT; + /* set LVDT bits according to lvdt_n */ + PMU_CTL |= lvdt_n; + /* enable LVD */ + PMU_CTL |= PMU_CTL_LVDEN; +} + +/*! + \brief disable PMU lvd + \param[in] none + \param[out] none + \retval none +*/ +void pmu_lvd_disable(void) +{ + /* disable LVD */ + PMU_CTL &= ~PMU_CTL_LVDEN; +} + +/*! + \brief PMU work at sleep mode + \param[in] sleepmodecmd: + only one parameter can be selected which is shown as below: + \arg WFI_CMD: use WFI command + \arg WFE_CMD: use WFE command + \param[out] none + \retval none +*/ +void pmu_to_sleepmode(uint8_t sleepmodecmd) +{ + /* clear sleepdeep bit of Cortex-M3 system control register */ + SCB->SCR &= ~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); + + /* select WFI or WFE command to enter sleep mode */ + if(WFI_CMD == sleepmodecmd){ + __WFI(); + }else{ + __WFE(); + } +} + +/*! + \brief PMU work at deepsleep mode + \param[in] ldo: + only one parameter can be selected which is shown as below: + \arg PMU_LDO_NORMAL: LDO work at normal power mode when pmu enter deepsleep mode + \arg PMU_LDO_LOWPOWER: LDO work at low power mode when pmu enter deepsleep mode + \param[in] deepsleepmodecmd: + only one parameter can be selected which is shown as below: + \arg WFI_CMD: use WFI command + \arg WFE_CMD: use WFE command + \param[out] none + \retval none +*/ +void pmu_to_deepsleepmode(uint32_t ldo,uint8_t deepsleepmodecmd) +{ + /* clear stbmod and ldolp bits */ + PMU_CTL &= ~((uint32_t)(PMU_CTL_STBMOD | PMU_CTL_LDOLP)); + + /* set ldolp bit according to pmu_ldo */ + PMU_CTL |= ldo; + + /* set sleepdeep bit of Cortex-M3 system control register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* select WFI or WFE command to enter deepsleep mode */ + if(WFI_CMD == deepsleepmodecmd){ + __WFI(); + }else{ + __SEV(); + __WFE(); + __WFE(); + } + /* reset sleepdeep bit of Cortex-M3 system control register */ + SCB->SCR &= ~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +} + +/*! + \brief pmu work at standby mode + \param[in] standbymodecmd: + only one parameter can be selected which is shown as below: + \arg WFI_CMD: use WFI command + \arg WFE_CMD: use WFE command + \param[out] none + \retval none +*/ +void pmu_to_standbymode(uint8_t standbymodecmd) +{ + /* set sleepdeep bit of Cortex-M3 system control register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* set stbmod bit */ + PMU_CTL |= PMU_CTL_STBMOD; + + /* reset wakeup flag */ + PMU_CTL |= PMU_CTL_WURST; + + /* select WFI or WFE command to enter standby mode */ + if(WFI_CMD == standbymodecmd){ + __WFI(); + }else{ + __WFE(); + } +} + +/*! + \brief enable wakeup pin + \param[in] none + \param[out] none + \retval none +*/ +void pmu_wakeup_pin_enable(void) +{ + PMU_CS |= PMU_CS_WUPEN; +} + +/*! + \brief disable wakeup pin + \param[in] none + \param[out] none + \retval none +*/ +void pmu_wakeup_pin_disable(void) +{ + PMU_CS &= ~PMU_CS_WUPEN; +} + +/*! + \brief enable write access to the registers in backup domain + \param[in] none + \param[out] none + \retval none +*/ +void pmu_backup_write_enable(void) +{ + PMU_CTL |= PMU_CTL_BKPWEN; +} + +/*! + \brief disable write access to the registers in backup domain + \param[in] none + \param[out] none + \retval none +*/ +void pmu_backup_write_disable(void) +{ + PMU_CTL &= ~PMU_CTL_BKPWEN; +} + +/*! + \brief get flag state + \param[in] flag: + only one parameter can be selected which is shown as below: + \arg PMU_FLAG_WAKEUP: wakeup flag + \arg PMU_FLAG_STANDBY: standby flag + \arg PMU_FLAG_LVD: lvd flag + \param[out] none + \retval FlagStatus SET or RESET +*/ +FlagStatus pmu_flag_get(uint32_t flag) +{ + if(PMU_CS & flag){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear flag bit + \param[in] flag_reset: + only one parameter can be selected which is shown as below: + \arg PMU_FLAG_RESET_WAKEUP: reset wakeup flag + \arg PMU_FLAG_RESET_STANDBY: reset standby flag + \param[out] none + \retval none +*/ +void pmu_flag_clear(uint32_t flag_reset) +{ + switch(flag_reset){ + case PMU_FLAG_RESET_WAKEUP: + /* reset wakeup flag */ + PMU_CTL |= PMU_CTL_WURST; + break; + case PMU_FLAG_RESET_STANDBY: + /* reset standby flag */ + PMU_CTL |= PMU_CTL_STBRST; + break; + default : + break; + } +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_rcu.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_rcu.c new file mode 100644 index 0000000000000000000000000000000000000000..579831ccaf37268a5bc97df6453f63a918e52d31 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_rcu.c @@ -0,0 +1,1193 @@ +/*! + \file gd32f10x_rcu.c + \brief RCU driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_rcu.h" + +/* define clock source */ +#define SEL_IRC8M ((uint16_t)0U) +#define SEL_HXTAL ((uint16_t)1U) +#define SEL_PLL ((uint16_t)2U) + +/* define startup timeout count */ +#define OSC_STARTUP_TIMEOUT ((uint32_t)0xFFFFFU) +#define LXTAL_STARTUP_TIMEOUT ((uint32_t)0x3FFFFFFU) + +/*! + \brief deinitialize the RCU + \param[in] none + \param[out] none + \retval none +*/ +void rcu_deinit(void) +{ + /* enable IRC8M */ + RCU_CTL |= RCU_CTL_IRC8MEN; + rcu_osci_stab_wait(RCU_IRC8M); + + /* reset CFG0 register */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | + RCU_CFG0_ADCPSC | RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0 | RCU_CFG0_PLLMF | + RCU_CFG0_USBDPSC | RCU_CFG0_CKOUT0SEL | RCU_CFG0_PLLMF_4 | RCU_CFG0_ADCPSC_2); +#elif defined(GD32F10X_CL) + RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | + RCU_CFG0_ADCPSC | RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0_LSB | RCU_CFG0_PLLMF | + RCU_CFG0_USBFSPSC | RCU_CFG0_CKOUT0SEL | RCU_CFG0_ADCPSC_2 | RCU_CFG0_PLLMF_4); +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + /* reset CTL register */ + RCU_CTL &= ~(RCU_CTL_HXTALEN | RCU_CTL_CKMEN | RCU_CTL_PLLEN); + RCU_CTL &= ~RCU_CTL_HXTALBPS; +#ifdef GD32F10X_CL + RCU_CTL &= ~(RCU_CTL_PLL1EN | RCU_CTL_PLL2EN); +#endif /* GD32F10X_CL */ + + /* reset INT and CFG1 register */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + RCU_INT = 0x009f0000U; +#elif defined(GD32F10X_CL) + RCU_INT = 0x00ff0000U; + RCU_CFG1 &= ~(RCU_CFG1_PREDV0 | RCU_CFG1_PREDV1 | RCU_CFG1_PLL1MF | RCU_CFG1_PLL2MF | + RCU_CFG1_PREDV0SEL | RCU_CFG1_I2S1SEL | RCU_CFG1_I2S2SEL); +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ +} + +/*! + \brief enable the peripherals clock + \param[in] periph: RCU peripherals, refer to rcu_periph_enum + only one parameter can be selected which is shown as below: + \arg RCU_GPIOx (x=A,B,C,D,E,F,G): GPIO ports clock + \arg RCU_AF : alternate function clock + \arg RCU_CRC: CRC clock + \arg RCU_DMAx (x=0,1): DMA clock + \arg RCU_ENET: ENET clock(CL series available) + \arg RCU_ENETTX: ENETTX clock(CL series available) + \arg RCU_ENETRX: ENETRX clock(CL series available) + \arg RCU_USBD: USBD clock(HD,XD series available) + \arg RCU_USBFS: USBFS clock(CL series available) + \arg RCU_EXMC: EXMC clock + \arg RCU_TIMERx (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are only available for XD series): TIMER clock + \arg RCU_WWDGT: WWDGT clock + \arg RCU_SPIx (x=0,1,2): SPI clock + \arg RCU_USARTx (x=0,1,2): USART clock + \arg RCU_UARTx (x=3,4): UART clock + \arg RCU_I2Cx (x=0,1): I2C clock + \arg RCU_CANx (x=0,1,CAN1 is only available for CL series): CAN clock + \arg RCU_PMU: PMU clock + \arg RCU_DAC: DAC clock + \arg RCU_RTC: RTC clock + \arg RCU_ADCx (x=0,1,2,ADC2 is not available for CL series): ADC clock + \arg RCU_SDIO: SDIO clock(not available for CL series) + \arg RCU_BKPI: BKP interface clock + \param[out] none + \retval none +*/ +void rcu_periph_clock_enable(rcu_periph_enum periph) +{ + RCU_REG_VAL(periph) |= BIT(RCU_BIT_POS(periph)); +} + +/*! + \brief disable the peripherals clock + \param[in] periph: RCU peripherals, refer to rcu_periph_enum + only one parameter can be selected which is shown as below: + \arg RCU_GPIOx (x=A,B,C,D,E,F,G): GPIO ports clock + \arg RCU_AF: alternate function clock + \arg RCU_CRC: CRC clock + \arg RCU_DMAx (x=0,1): DMA clock + \arg RCU_ENET: ENET clock(CL series available) + \arg RCU_ENETTX: ENETTX clock(CL series available) + \arg RCU_ENETRX: ENETRX clock(CL series available) + \arg RCU_USBD: USBD clock(HD,XD series available) + \arg RCU_USBFS: USBFS clock(CL series available) + \arg RCU_EXMC: EXMC clock + \arg RCU_TIMERx (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are only available for XD series): TIMER clock + \arg RCU_WWDGT: WWDGT clock + \arg RCU_SPIx (x=0,1,2): SPI clock + \arg RCU_USARTx (x=0,1,2): USART clock + \arg RCU_UARTx (x=3,4): UART clock + \arg RCU_I2Cx (x=0,1): I2C clock + \arg RCU_CANx (x=0,1,CAN1 is only available for CL series): CAN clock + \arg RCU_PMU: PMU clock + \arg RCU_DAC: DAC clock + \arg RCU_RTC: RTC clock + \arg RCU_ADCx (x=0,1,2,ADC2 is not available for CL series): ADC clock + \arg RCU_SDIO: SDIO clock(not available for CL series) + \arg RCU_BKPI: BKP interface clock + \param[out] none + \retval none +*/ +void rcu_periph_clock_disable(rcu_periph_enum periph) +{ + RCU_REG_VAL(periph) &= ~BIT(RCU_BIT_POS(periph)); +} + +/*! + \brief enable the peripherals clock when sleep mode + \param[in] periph: RCU peripherals, refer to rcu_periph_sleep_enum + only one parameter can be selected which is shown as below: + \arg RCU_FMC_SLP: FMC clock + \arg RCU_SRAM_SLP: SRAM clock + \param[out] none + \retval none +*/ +void rcu_periph_clock_sleep_enable(rcu_periph_sleep_enum periph) +{ + RCU_REG_VAL(periph) |= BIT(RCU_BIT_POS(periph)); +} + +/*! + \brief disable the peripherals clock when sleep mode + \param[in] periph: RCU peripherals, refer to rcu_periph_sleep_enum + only one parameter can be selected which is shown as below: + \arg RCU_FMC_SLP: FMC clock + \arg RCU_SRAM_SLP: SRAM clock + \param[out] none + \retval none +*/ +void rcu_periph_clock_sleep_disable(rcu_periph_sleep_enum periph) +{ + RCU_REG_VAL(periph) &= ~BIT(RCU_BIT_POS(periph)); +} + +/*! + \brief reset the peripherals + \param[in] periph_reset: RCU peripherals reset, refer to rcu_periph_reset_enum + only one parameter can be selected which is shown as below: + \arg RCU_GPIOxRST (x=A,B,C,D,E,F,G): reset GPIO ports + \arg RCU_AFRST : reset alternate function clock + \arg RCU_ENETRST: reset ENET(CL series available) + \arg RCU_USBDRST: reset USBD(HD,XD series available) + \arg RCU_USBFSRST: reset USBFS(CL series available) + \arg RCU_TIMERxRST (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are only available for XD series): reset TIMER + \arg RCU_WWDGTRST: reset WWDGT + \arg RCU_SPIxRST (x=0,1,2): reset SPI + \arg RCU_USARTxRST (x=0,1,2): reset USART + \arg RCU_UARTxRST (x=3,4): reset UART + \arg RCU_I2CxRST (x=0,1): reset I2C + \arg RCU_CANxRST (x=0,1,CAN1 is only available for CL series): reset CAN + \arg RCU_PMURST: reset PMU + \arg RCU_DACRST: reset DAC + \arg RCU_ADCxRST (x=0,1,2, ADC2 is not available for CL series): reset ADC + \arg RCU_BKPIRST: reset BKPI + \param[out] none + \retval none +*/ +void rcu_periph_reset_enable(rcu_periph_reset_enum periph_reset) +{ + RCU_REG_VAL(periph_reset) |= BIT(RCU_BIT_POS(periph_reset)); +} + +/*! + \brief disable reset the peripheral + \param[in] periph_reset: RCU peripherals reset, refer to rcu_periph_reset_enum + only one parameter can be selected which is shown as below: + \arg RCU_GPIOxRST (x=A,B,C,D,E,F,G): reset GPIO ports + \arg RCU_AFRST : reset alternate function clock + \arg RCU_ENETRST: reset ENET(CL series available) + \arg RCU_USBDRST: reset USBD(HD,XD series available) + \arg RCU_USBFSRST: reset USBFS(CL series available) + \arg RCU_TIMERxRST (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are only available for XD series): reset TIMER + \arg RCU_WWDGTRST: reset WWDGT + \arg RCU_SPIxRST (x=0,1,2): reset SPI + \arg RCU_USARTxRST (x=0,1,2): reset USART + \arg RCU_UARTxRST (x=3,4): reset UART + \arg RCU_I2CxRST (x=0,1): reset I2C + \arg RCU_CANxRST (x=0,1,CAN1 is only available for CL series): reset CAN + \arg RCU_PMURST: reset PMU + \arg RCU_DACRST: reset DAC + \arg RCU_ADCxRST (x=0,1,2, ADC2 is not available for CL series): reset ADC + \arg RCU_BKPIRST: reset BKPI + \param[out] none + \retval none +*/ +void rcu_periph_reset_disable(rcu_periph_reset_enum periph_reset) +{ + RCU_REG_VAL(periph_reset) &= ~BIT(RCU_BIT_POS(periph_reset)); +} + +/*! + \brief reset the BKP domain + \param[in] none + \param[out] none + \retval none +*/ +void rcu_bkp_reset_enable(void) +{ + RCU_BDCTL |= RCU_BDCTL_BKPRST; +} + +/*! + \brief disable the BKP domain reset + \param[in] none + \param[out] none + \retval none +*/ +void rcu_bkp_reset_disable(void) +{ + RCU_BDCTL &= ~RCU_BDCTL_BKPRST; +} + +/*! + \brief configure the system clock source + \param[in] ck_sys: system clock source select + only one parameter can be selected which is shown as below: + \arg RCU_CKSYSSRC_IRC8M: select CK_IRC8M as the CK_SYS source + \arg RCU_CKSYSSRC_HXTAL: select CK_HXTAL as the CK_SYS source + \arg RCU_CKSYSSRC_PLL: select CK_PLL as the CK_SYS source + \param[out] none + \retval none +*/ +void rcu_system_clock_source_config(uint32_t ck_sys) +{ + uint32_t reg; + + reg = RCU_CFG0; + /* reset the SCS bits and set according to ck_sys */ + reg &= ~RCU_CFG0_SCS; + RCU_CFG0 = (reg | ck_sys); +} + +/*! + \brief get the system clock source + \param[in] none + \param[out] none + \retval which clock is selected as CK_SYS source + \arg RCU_SCSS_IRC8M: CK_IRC8M is selected as the CK_SYS source + \arg RCU_SCSS_HXTAL: CK_HXTAL is selected as the CK_SYS source + \arg RCU_SCSS_PLL: CK_PLL is selected as the CK_SYS source +*/ +uint32_t rcu_system_clock_source_get(void) +{ + return (RCU_CFG0 & RCU_CFG0_SCSS); +} + +/*! + \brief configure the AHB clock prescaler selection + \param[in] ck_ahb: AHB clock prescaler selection + only one parameter can be selected which is shown as below: + \arg RCU_AHB_CKSYS_DIVx, x=1, 2, 4, 8, 16, 64, 128, 256, 512 + \param[out] none + \retval none +*/ +void rcu_ahb_clock_config(uint32_t ck_ahb) +{ + uint32_t reg; + + reg = RCU_CFG0; + + /* reset the AHBPSC bits and set according to ck_ahb */ + reg &= ~RCU_CFG0_AHBPSC; + RCU_CFG0 = (reg | ck_ahb); +} + +/*! + \brief configure the APB1 clock prescaler selection + \param[in] ck_apb1: APB1 clock prescaler selection + only one parameter can be selected which is shown as below: + \arg RCU_APB1_CKAHB_DIV1: select CK_AHB as CK_APB1 + \arg RCU_APB1_CKAHB_DIV2: select CK_AHB/2 as CK_APB1 + \arg RCU_APB1_CKAHB_DIV4: select CK_AHB/4 as CK_APB1 + \arg RCU_APB1_CKAHB_DIV8: select CK_AHB/8 as CK_APB1 + \arg RCU_APB1_CKAHB_DIV16: select CK_AHB/16 as CK_APB1 + \param[out] none + \retval none +*/ +void rcu_apb1_clock_config(uint32_t ck_apb1) +{ + uint32_t reg; + + reg = RCU_CFG0; + + /* reset the APB1PSC and set according to ck_apb1 */ + reg &= ~RCU_CFG0_APB1PSC; + RCU_CFG0 = (reg | ck_apb1); +} + +/*! + \brief configure the APB2 clock prescaler selection + \param[in] ck_apb2: APB2 clock prescaler selection + only one parameter can be selected which is shown as below: + \arg RCU_APB2_CKAHB_DIV1: select CK_AHB as CK_APB2 + \arg RCU_APB2_CKAHB_DIV2: select CK_AHB/2 as CK_APB2 + \arg RCU_APB2_CKAHB_DIV4: select CK_AHB/4 as CK_APB2 + \arg RCU_APB2_CKAHB_DIV8: select CK_AHB/8 as CK_APB2 + \arg RCU_APB2_CKAHB_DIV16: select CK_AHB/16 as CK_APB2 + \param[out] none + \retval none +*/ +void rcu_apb2_clock_config(uint32_t ck_apb2) +{ + uint32_t reg; + + reg = RCU_CFG0; + + /* reset the APB2PSC and set according to ck_apb2 */ + reg &= ~RCU_CFG0_APB2PSC; + RCU_CFG0 = (reg | ck_apb2); +} + +/*! + \brief configure the CK_OUT0 clock source + \param[in] ckout0_src: CK_OUT0 clock source selection + only one parameter can be selected which is shown as below: + \arg RCU_CKOUT0SRC_NONE: no clock selected + \arg RCU_CKOUT0SRC_CKSYS: system clock selected + \arg RCU_CKOUT0SRC_IRC8M: high speed 8M internal oscillator clock selected + \arg RCU_CKOUT0SRC_HXTAL: HXTAL selected + \arg RCU_CKOUT0SRC_CKPLL_DIV2: CK_PLL/2 selected + \arg RCU_CKOUT0SRC_CKPLL1: CK_PLL1 selected + \arg RCU_CKOUT0SRC_CKPLL2_DIV2: CK_PLL2/2 selected + \arg RCU_CKOUT0SRC_EXT1: EXT1 selected + \arg RCU_CKOUT0SRC_CKPLL2: PLL2 selected + \param[out] none + \retval none +*/ +void rcu_ckout0_config(uint32_t ckout0_src) +{ + uint32_t reg; + + reg = RCU_CFG0; + + /* reset the CKOUT0SRC, set according to ckout0_src */ + reg &= ~RCU_CFG0_CKOUT0SEL; + RCU_CFG0 = (reg | ckout0_src); +} + +/*! + \brief configure the main PLL clock + \param[in] pll_src: PLL clock source selection + only one parameter can be selected which is shown as below: + \arg RCU_PLLSRC_IRC8M_DIV2: IRC8M/2 clock selected as source clock of PLL + \arg RCU_PLLSRC_HXTAL: HXTAL selected as source clock of PLL + \param[in] pll_mul: PLL clock multiplication factor + only one parameter can be selected which is shown as below: + \arg RCU_PLL_MULx (XD series x = 2..32, CL series x = 2..14, 6.5, 16..32) + \param[out] none + \retval none +*/ +void rcu_pll_config(uint32_t pll_src, uint32_t pll_mul) +{ + uint32_t reg = 0U; + + reg = RCU_CFG0; + + /* PLL clock source and multiplication factor configuration */ + reg &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + reg |= (pll_src | pll_mul); + + RCU_CFG0 = reg; +} + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) +/*! + \brief configure the PREDV0 division factor + \param[in] predv0_div: PREDV0 division factor + only one parameter can be selected which is shown as below: + \arg RCU_PREDV0_DIVx, x = 1,2 + \param[out] none + \retval none +*/ +void rcu_predv0_config(uint32_t predv0_div) +{ + uint32_t reg = 0U; + + reg = RCU_CFG0; + /* reset PREDV0 bit */ + reg &= ~RCU_CFG0_PREDV0; + if(RCU_PREDV0_DIV2 == predv0_div){ + /* set the PREDV0 bit */ + reg |= RCU_CFG0_PREDV0; + } + + RCU_CFG0 = reg; +} +#elif defined(GD32F10X_CL) +/*! + \brief configure the PREDV0 division factor and clock source + \param[in] predv0_source: PREDV0 input clock source selection + only one parameter can be selected which is shown as below: + \arg RCU_PREDV0SRC_HXTAL: HXTAL selected as PREDV0 input source clock + \arg RCU_PREDV0SRC_CKPLL1: CK_PLL1 selected as PREDV0 input source clock + \param[in] predv0_div: PREDV0 division factor + only one parameter can be selected which is shown as below: + \arg RCU_PREDV0_DIVx, x = 1..16 + \param[out] none + \retval none +*/ +void rcu_predv0_config(uint32_t predv0_source, uint32_t predv0_div) +{ + uint32_t reg = 0U; + + reg = RCU_CFG1; + /* reset PREDV0SEL and PREDV0 bits */ + reg &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PREDV0); + /* set the PREDV0SEL and PREDV0 division factor */ + reg |= (predv0_source | predv0_div); + + RCU_CFG1 = reg; +} + +/*! + \brief configure the PREDV1 division factor + \param[in] predv1_div: PREDV1 division factor + only one parameter can be selected which is shown as below: + \arg RCU_PREDV1_DIVx, x = 1..16 + \param[out] none + \retval none +*/ +void rcu_predv1_config(uint32_t predv1_div) +{ + uint32_t reg = 0U; + + reg = RCU_CFG1; + /* reset the PREDV1 bits */ + reg &= ~RCU_CFG1_PREDV1; + /* set the PREDV1 division factor */ + reg |= predv1_div; + + RCU_CFG1 = reg; +} + +/*! + \brief configure the PLL1 clock + \param[in] pll_mul: PLL clock multiplication factor + only one parameter can be selected which is shown as below: + \arg RCU_PLL1_MULx (x = 8..16, 20) + \param[out] none + \retval none +*/ +void rcu_pll1_config(uint32_t pll_mul) +{ + RCU_CFG1 &= ~RCU_CFG1_PLL1MF; + RCU_CFG1 |= pll_mul; +} + +/*! + \brief configure the PLL2 clock + \param[in] pll_mul: PLL clock multiplication factor + only one parameter can be selected which is shown as below: + \arg RCU_PLL2_MULx (x = 8..16, 20) + \param[out] none + \retval none +*/ +void rcu_pll2_config(uint32_t pll_mul) +{ + RCU_CFG1 &= ~RCU_CFG1_PLL2MF; + RCU_CFG1 |= pll_mul; +} +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + +/*! + \brief configure the ADC prescaler factor + \param[in] adc_psc: ADC prescaler factor + only one parameter can be selected which is shown as below: + \arg RCU_CKADC_CKAPB2_DIV2: ADC prescaler select CK_APB2/2 + \arg RCU_CKADC_CKAPB2_DIV4: ADC prescaler select CK_APB2/4 + \arg RCU_CKADC_CKAPB2_DIV6: ADC prescaler select CK_APB2/6 + \arg RCU_CKADC_CKAPB2_DIV8: ADC prescaler select CK_APB2/8 + \arg RCU_CKADC_CKAPB2_DIV12: ADC prescaler select CK_APB2/12 + \arg RCU_CKADC_CKAPB2_DIV16: ADC prescaler select CK_APB2/16 + \param[out] none + \retval none +*/ +void rcu_adc_clock_config(uint32_t adc_psc) +{ + uint32_t reg0; + + /* reset the ADCPSC bits */ + reg0 = RCU_CFG0; + reg0 &= ~(RCU_CFG0_ADCPSC_2 | RCU_CFG0_ADCPSC); + + /* set the ADC prescaler factor */ + switch(adc_psc){ + case RCU_CKADC_CKAPB2_DIV2: + case RCU_CKADC_CKAPB2_DIV4: + case RCU_CKADC_CKAPB2_DIV6: + case RCU_CKADC_CKAPB2_DIV8: + reg0 |= (adc_psc << 14); + break; + + case RCU_CKADC_CKAPB2_DIV12: + case RCU_CKADC_CKAPB2_DIV16: + adc_psc &= ~BIT(2); + reg0 |= (adc_psc << 14 | RCU_CFG0_ADCPSC_2); + break; + + default: + break; + } + + /* set the register */ + RCU_CFG0 = reg0; +} + +/*! + \brief configure the USBD/USBFS prescaler factor + \param[in] usb_psc: USB prescaler factor + only one parameter can be selected which is shown as below: + \arg RCU_CKUSB_CKPLL_DIV1_5: USBD/USBFS prescaler select CK_PLL/1.5 + \arg RCU_CKUSB_CKPLL_DIV1: USBD/USBFS prescaler select CK_PLL/1 + \arg RCU_CKUSB_CKPLL_DIV2_5: USBD/USBFS prescaler select CK_PLL/2.5 + \arg RCU_CKUSB_CKPLL_DIV2: USBD/USBFS prescaler select CK_PLL/2 + \param[out] none + \retval none +*/ +void rcu_usb_clock_config(uint32_t usb_psc) +{ + uint32_t reg; + + reg = RCU_CFG0; + + /* configure the USBD/USBFS prescaler factor */ +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + reg &= ~RCU_CFG0_USBDPSC; +#elif defined(GD32F10X_CL) + reg &= ~RCU_CFG0_USBFSPSC; +#endif /* GD32F10X_MD and GD32F10X_HD and GD32F10X_XD */ + + RCU_CFG0 = (reg | usb_psc); +} + +/*! + \brief configure the RTC clock source selection + \param[in] rtc_clock_source: RTC clock source selection + only one parameter can be selected which is shown as below: + \arg RCU_RTCSRC_NONE: no clock selected + \arg RCU_RTCSRC_LXTAL: CK_LXTAL selected as RTC source clock + \arg RCU_RTCSRC_IRC40K: CK_IRC40K selected as RTC source clock + \arg RCU_RTCSRC_HXTAL_DIV_128: CK_HXTAL/128 selected as RTC source clock + \param[out] none + \retval none +*/ +void rcu_rtc_clock_config(uint32_t rtc_clock_source) +{ + uint32_t reg; + + reg = RCU_BDCTL; + /* reset the RTCSRC bits and set according to rtc_clock_source */ + reg &= ~RCU_BDCTL_RTCSRC; + RCU_BDCTL = (reg | rtc_clock_source); +} + +#ifdef GD32F10X_CL +/*! + \brief configure the I2S1 clock source selection + \param[in] i2s_clock_source: I2S1 clock source selection + only one parameter can be selected which is shown as below: + \arg RCU_I2S1SRC_CKSYS: System clock selected as I2S1 source clock + \arg RCU_I2S1SRC_CKPLL2_MUL2: CK_PLL2x2 selected as I2S1 source clock + \param[out] none + \retval none +*/ +void rcu_i2s1_clock_config(uint32_t i2s_clock_source) +{ + uint32_t reg; + + reg = RCU_CFG1; + /* reset the I2S1SEL bit and set according to i2s_clock_source */ + reg &= ~RCU_CFG1_I2S1SEL; + RCU_CFG1 = (reg | i2s_clock_source); +} + +/*! + \brief configure the I2S2 clock source selection + \param[in] i2s_clock_source: I2S2 clock source selection + only one parameter can be selected which is shown as below: + \arg RCU_I2S2SRC_CKSYS: system clock selected as I2S2 source clock + \arg RCU_I2S2SRC_CKPLL2_MUL2: CK_PLL2x2 selected as I2S2 source clock + \param[out] none + \retval none +*/ +void rcu_i2s2_clock_config(uint32_t i2s_clock_source) +{ + uint32_t reg; + + reg = RCU_CFG1; + /* reset the I2S2SEL bit and set according to i2s_clock_source */ + reg &= ~RCU_CFG1_I2S2SEL; + RCU_CFG1 = (reg | i2s_clock_source); +} +#endif /* GD32F10X_CL */ + +/*! + \brief get the clock stabilization and periphral reset flags + \param[in] flag: the clock stabilization and periphral reset flags, refer to rcu_flag_enum + only one parameter can be selected which is shown as below: + \arg RCU_FLAG_IRC8MSTB: IRC8M stabilization flag + \arg RCU_FLAG_HXTALSTB: HXTAL stabilization flag + \arg RCU_FLAG_PLLSTB: PLL stabilization flag + \arg RCU_FLAG_PLL1STB: PLL1 stabilization flag(CL series only) + \arg RCU_FLAG_PLL2STB: PLL2 stabilization flag(CL series only) + \arg RCU_FLAG_LXTALSTB: LXTAL stabilization flag + \arg RCU_FLAG_IRC40KSTB: IRC40K stabilization flag + \arg RCU_FLAG_EPRST: external PIN reset flag + \arg RCU_FLAG_PORRST: power reset flag + \arg RCU_FLAG_SWRST: software reset flag + \arg RCU_FLAG_FWDGTRST: free watchdog timer reset flag + \arg RCU_FLAG_WWDGTRST: window watchdog timer reset flag + \arg RCU_FLAG_LPRST: low-power reset flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus rcu_flag_get(rcu_flag_enum flag) +{ + /* get the rcu flag */ + if(RESET != (RCU_REG_VAL(flag) & BIT(RCU_BIT_POS(flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear all the reset flag + \param[in] none + \param[out] none + \retval none +*/ +void rcu_all_reset_flag_clear(void) +{ + RCU_RSTSCK |= RCU_RSTSCK_RSTFC; +} + +/*! + \brief get the clock stabilization interrupt and ckm flags + \param[in] int_flag: interrupt and ckm flags, refer to rcu_int_flag_enum + only one parameter can be selected which is shown as below: + \arg RCU_INT_FLAG_IRC40KSTB: IRC40K stabilization interrupt flag + \arg RCU_INT_FLAG_LXTALSTB: LXTAL stabilization interrupt flag + \arg RCU_INT_FLAG_IRC8MSTB: IRC8M stabilization interrupt flag + \arg RCU_INT_FLAG_HXTALSTB: HXTAL stabilization interrupt flag + \arg RCU_INT_FLAG_PLLSTB: PLL stabilization interrupt flag + \arg RCU_INT_FLAG_PLL1STB: PLL1 stabilization interrupt flag(CL series only) + \arg RCU_INT_FLAG_PLL2STB: PLL2 stabilization interrupt flag(CL series only) + \arg RCU_INT_FLAG_CKM: HXTAL clock stuck interrupt flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus rcu_interrupt_flag_get(rcu_int_flag_enum int_flag) +{ + /* get the rcu interrupt flag */ + if(RESET != (RCU_REG_VAL(int_flag) & BIT(RCU_BIT_POS(int_flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear the interrupt flags + \param[in] int_flag_clear: clock stabilization and stuck interrupt flags clear, refer to rcu_int_flag_clear_enum + only one parameter can be selected which is shown as below: + \arg RCU_INT_FLAG_IRC40KSTB_CLR: IRC40K stabilization interrupt flag clear + \arg RCU_INT_FLAG_LXTALSTB_CLR: LXTAL stabilization interrupt flag clear + \arg RCU_INT_FLAG_IRC8MSTB_CLR: IRC8M stabilization interrupt flag clear + \arg RCU_INT_FLAG_HXTALSTB_CLR: HXTAL stabilization interrupt flag clear + \arg RCU_INT_FLAG_PLLSTB_CLR: PLL stabilization interrupt flag clear + \arg RCU_INT_FLAG_PLL1STB_CLR: PLL1 stabilization interrupt flag clear(CL series only) + \arg RCU_INT_FLAG_PLL2STB_CLR: PLL2 stabilization interrupt flag clear(CL series only) + \arg RCU_INT_FLAG_CKM_CLR: clock stuck interrupt flag clear + \param[out] none + \retval none +*/ +void rcu_interrupt_flag_clear(rcu_int_flag_clear_enum int_flag_clear) +{ + RCU_REG_VAL(int_flag_clear) |= BIT(RCU_BIT_POS(int_flag_clear)); +} + +/*! + \brief enable the stabilization interrupt + \param[in] stab_int: clock stabilization interrupt, refer to rcu_int_enum + Only one parameter can be selected which is shown as below: + \arg RCU_INT_IRC40KSTB: IRC40K stabilization interrupt enable + \arg RCU_INT_LXTALSTB: LXTAL stabilization interrupt enable + \arg RCU_INT_IRC8MSTB: IRC8M stabilization interrupt enable + \arg RCU_INT_HXTALSTB: HXTAL stabilization interrupt enable + \arg RCU_INT_PLLSTB: PLL stabilization interrupt enable + \arg RCU_INT_PLL1STB: PLL1 stabilization interrupt enable(CL series only) + \arg RCU_INT_PLL2STB: PLL2 stabilization interrupt enable(CL series only) + \param[out] none + \retval none +*/ +void rcu_interrupt_enable(rcu_int_enum stab_int) +{ + RCU_REG_VAL(stab_int) |= BIT(RCU_BIT_POS(stab_int)); +} + +/*! + \brief disable the stabilization interrupt + \param[in] stab_int: clock stabilization interrupt, refer to rcu_int_enum + only one parameter can be selected which is shown as below: + \arg RCU_INT_IRC40KSTB: IRC40K stabilization interrupt enable + \arg RCU_INT_LXTALSTB: LXTAL stabilization interrupt enable + \arg RCU_INT_IRC8MSTB: IRC8M stabilization interrupt enable + \arg RCU_INT_HXTALSTB: HXTAL stabilization interrupt enable + \arg RCU_INT_PLLSTB: PLL stabilization interrupt enable + \arg RCU_INT_PLL1STB: PLL1 stabilization interrupt enable(CL series only) + \arg RCU_INT_PLL2STB: PLL2 stabilization interrupt enable(CL series only) + \param[out] none + \retval none +*/ +void rcu_interrupt_disable(rcu_int_enum stab_int) +{ + RCU_REG_VAL(stab_int) &= ~BIT(RCU_BIT_POS(stab_int)); +} + +/*! + \brief wait for oscillator stabilization flags is SET or oscillator startup is timeout + \param[in] osci: oscillator types, refer to rcu_osci_type_enum + only one parameter can be selected which is shown as below: + \arg RCU_HXTAL: high speed crystal oscillator(HXTAL) + \arg RCU_LXTAL: low speed crystal oscillator(LXTAL) + \arg RCU_IRC8M: internal 8M RC oscillators(IRC8M) + \arg RCU_IRC40K: internal 40K RC oscillator(IRC40K) + \arg RCU_PLL_CK: phase locked loop(PLL) + \arg RCU_PLL1_CK: phase locked loop 1(CL series only) + \arg RCU_PLL2_CK: phase locked loop 2(CL series only) + \param[out] none + \retval ErrStatus: SUCCESS or ERROR +*/ +ErrStatus rcu_osci_stab_wait(rcu_osci_type_enum osci) +{ + uint32_t stb_cnt = 0U; + ErrStatus reval = ERROR; + FlagStatus osci_stat = RESET; + + switch(osci){ + /* wait HXTAL stable */ + case RCU_HXTAL: + while((RESET == osci_stat) && (HXTAL_STARTUP_TIMEOUT != stb_cnt)){ + osci_stat = rcu_flag_get(RCU_FLAG_HXTALSTB); + stb_cnt++; + } + + /* check whether flag is set or not */ + if(RESET != rcu_flag_get(RCU_FLAG_HXTALSTB)){ + reval = SUCCESS; + } + break; + + /* wait LXTAL stable */ + case RCU_LXTAL: + while((RESET == osci_stat) && (LXTAL_STARTUP_TIMEOUT != stb_cnt)){ + osci_stat = rcu_flag_get(RCU_FLAG_LXTALSTB); + stb_cnt++; + } + + /* check whether flag is set or not */ + if(RESET != rcu_flag_get(RCU_FLAG_LXTALSTB)){ + reval = SUCCESS; + } + break; + + /* wait IRC8M stable */ + case RCU_IRC8M: + while((RESET == osci_stat) && (IRC8M_STARTUP_TIMEOUT != stb_cnt)){ + osci_stat = rcu_flag_get(RCU_FLAG_IRC8MSTB); + stb_cnt++; + } + + /* check whether flag is set or not */ + if(RESET != rcu_flag_get(RCU_FLAG_IRC8MSTB)){ + reval = SUCCESS; + } + break; + + /* wait IRC40K stable */ + case RCU_IRC40K: + while((RESET == osci_stat) && (OSC_STARTUP_TIMEOUT != stb_cnt)){ + osci_stat = rcu_flag_get(RCU_FLAG_IRC40KSTB); + stb_cnt++; + } + + /* check whether flag is set or not */ + if(RESET != rcu_flag_get(RCU_FLAG_IRC40KSTB)){ + reval = SUCCESS; + } + break; + + /* wait PLL stable */ + case RCU_PLL_CK: + while((RESET == osci_stat) && (OSC_STARTUP_TIMEOUT != stb_cnt)){ + osci_stat = rcu_flag_get(RCU_FLAG_PLLSTB); + stb_cnt++; + } + + /* check whether flag is set or not */ + if(RESET != rcu_flag_get(RCU_FLAG_PLLSTB)){ + reval = SUCCESS; + } + break; + +#ifdef GD32F10X_CL + /* wait PLL1 stable */ + case RCU_PLL1_CK: + while((RESET == osci_stat) && (OSC_STARTUP_TIMEOUT != stb_cnt)){ + osci_stat = rcu_flag_get(RCU_FLAG_PLL1STB); + stb_cnt++; + } + + /* check whether flag is set or not */ + if(RESET != rcu_flag_get(RCU_FLAG_PLL1STB)){ + reval = SUCCESS; + } + break; + /* wait PLL2 stable */ + case RCU_PLL2_CK: + while((RESET == osci_stat) && (OSC_STARTUP_TIMEOUT != stb_cnt)){ + osci_stat = rcu_flag_get(RCU_FLAG_PLL2STB); + stb_cnt++; + } + + /* check whether flag is set or not */ + if(RESET != rcu_flag_get(RCU_FLAG_PLL2STB)){ + reval = SUCCESS; + } + break; +#endif /* GD32F10X_CL */ + + default: + break; + } + + /* return value */ + return reval; +} + +/*! + \brief turn on the oscillator + \param[in] osci: oscillator types, refer to rcu_osci_type_enum + only one parameter can be selected which is shown as below: + \arg RCU_HXTAL: high speed crystal oscillator(HXTAL) + \arg RCU_LXTAL: low speed crystal oscillator(LXTAL) + \arg RCU_IRC8M: internal 8M RC oscillators(IRC8M) + \arg RCU_IRC40K: internal 40K RC oscillator(IRC40K) + \arg RCU_PLL_CK: phase locked loop(PLL) + \arg RCU_PLL1_CK: phase locked loop 1(CL series only) + \arg RCU_PLL2_CK: phase locked loop 2(CL series only) + \param[out] none + \retval none +*/ +void rcu_osci_on(rcu_osci_type_enum osci) +{ + RCU_REG_VAL(osci) |= BIT(RCU_BIT_POS(osci)); +} + +/*! + \brief turn off the oscillator + \param[in] osci: oscillator types, refer to rcu_osci_type_enum + only one parameter can be selected which is shown as below: + \arg RCU_HXTAL: high speed crystal oscillator(HXTAL) + \arg RCU_LXTAL: low speed crystal oscillator(LXTAL) + \arg RCU_IRC8M: internal 8M RC oscillators(IRC8M) + \arg RCU_IRC40K: internal 40K RC oscillator(IRC40K) + \arg RCU_PLL_CK: phase locked loop(PLL) + \arg RCU_PLL1_CK: phase locked loop 1(CL series only) + \arg RCU_PLL2_CK: phase locked loop 2(CL series only) + \param[out] none + \retval none +*/ +void rcu_osci_off(rcu_osci_type_enum osci) +{ + RCU_REG_VAL(osci) &= ~BIT(RCU_BIT_POS(osci)); +} + +/*! + \brief enable the oscillator bypass mode, HXTALEN or LXTALEN must be reset before it + \param[in] osci: oscillator types, refer to rcu_osci_type_enum + only one parameter can be selected which is shown as below: + \arg RCU_HXTAL: high speed crystal oscillator(HXTAL) + \arg RCU_LXTAL: low speed crystal oscillator(LXTAL) + \param[out] none + \retval none +*/ +void rcu_osci_bypass_mode_enable(rcu_osci_type_enum osci) +{ + uint32_t reg; + + switch(osci){ + /* enable HXTAL to bypass mode */ + case RCU_HXTAL: + reg = RCU_CTL; + RCU_CTL &= ~RCU_CTL_HXTALEN; + RCU_CTL = (reg | RCU_CTL_HXTALBPS); + break; + /* enable LXTAL to bypass mode */ + case RCU_LXTAL: + reg = RCU_BDCTL; + RCU_BDCTL &= ~RCU_BDCTL_LXTALEN; + RCU_BDCTL = (reg | RCU_BDCTL_LXTALBPS); + break; + case RCU_IRC8M: + case RCU_IRC40K: + case RCU_PLL_CK: +#ifdef GD32F10X_CL + case RCU_PLL1_CK: + case RCU_PLL2_CK: +#endif /* GD32F10X_CL */ + break; + default: + break; + } +} + +/*! + \brief disable the oscillator bypass mode, HXTALEN or LXTALEN must be reset before it + \param[in] osci: oscillator types, refer to rcu_osci_type_enum + only one parameter can be selected which is shown as below: + \arg RCU_HXTAL: high speed crystal oscillator(HXTAL) + \arg RCU_LXTAL: low speed crystal oscillator(LXTAL) + \param[out] none + \retval none +*/ +void rcu_osci_bypass_mode_disable(rcu_osci_type_enum osci) +{ + uint32_t reg; + + switch(osci){ + /* disable HXTAL to bypass mode */ + case RCU_HXTAL: + reg = RCU_CTL; + RCU_CTL &= ~RCU_CTL_HXTALEN; + RCU_CTL = (reg & ~RCU_CTL_HXTALBPS); + break; + /* disable LXTAL to bypass mode */ + case RCU_LXTAL: + reg = RCU_BDCTL; + RCU_BDCTL &= ~RCU_BDCTL_LXTALEN; + RCU_BDCTL = (reg & ~RCU_BDCTL_LXTALBPS); + break; + case RCU_IRC8M: + case RCU_IRC40K: + case RCU_PLL_CK: +#ifdef GD32F10X_CL + case RCU_PLL1_CK: + case RCU_PLL2_CK: +#endif /* GD32F10X_CL */ + break; + default: + break; + } +} + +/*! + \brief enable the HXTAL clock monitor + \param[in] none + \param[out] none + \retval none +*/ + +void rcu_hxtal_clock_monitor_enable(void) +{ + RCU_CTL |= RCU_CTL_CKMEN; +} + +/*! + \brief disable the HXTAL clock monitor + \param[in] none + \param[out] none + \retval none +*/ +void rcu_hxtal_clock_monitor_disable(void) +{ + RCU_CTL &= ~RCU_CTL_CKMEN; +} + +/*! + \brief set the IRC8M adjust value + \param[in] irc8m_adjval: IRC8M adjust value, must be between 0 and 0x1F + \param[out] none + \retval none +*/ +void rcu_irc8m_adjust_value_set(uint32_t irc8m_adjval) +{ + uint32_t reg; + + reg = RCU_CTL; + /* reset the IRC8MADJ bits and set according to irc8m_adjval */ + reg &= ~RCU_CTL_IRC8MADJ; + RCU_CTL = (reg | ((irc8m_adjval & 0x1FU) << 3)); +} + +/*! + \brief deep-sleep mode voltage select + \param[in] dsvol: deep sleep mode voltage + only one parameter can be selected which is shown as below: + \arg RCU_DEEPSLEEP_V_1_2: the core voltage is 1.2V + \arg RCU_DEEPSLEEP_V_1_1: the core voltage is 1.1V + \arg RCU_DEEPSLEEP_V_1_0: the core voltage is 1.0V + \arg RCU_DEEPSLEEP_V_0_9: the core voltage is 0.9V + \param[out] none + \retval none +*/ +void rcu_deepsleep_voltage_set(uint32_t dsvol) +{ + dsvol &= RCU_DSV_DSLPVS; + RCU_DSV = dsvol; +} + +/*! + \brief get the system clock, bus and peripheral clock frequency + \param[in] clock: the clock frequency which to get + only one parameter can be selected which is shown as below: + \arg CK_SYS: system clock frequency + \arg CK_AHB: AHB clock frequency + \arg CK_APB1: APB1 clock frequency + \arg CK_APB2: APB2 clock frequency + \param[out] none + \retval clock frequency of system, AHB, APB1, APB2 +*/ +uint32_t rcu_clock_freq_get(rcu_clock_freq_enum clock) +{ + uint32_t sws, ck_freq = 0U; + uint32_t cksys_freq, ahb_freq, apb1_freq, apb2_freq; + uint32_t pllsel, predv0sel, pllmf,ck_src, idx, clk_exp; +#ifdef GD32F10X_CL + uint32_t predv0, predv1, pll1mf; +#endif /* GD32F10X_CL */ + + /* exponent of AHB, APB1 and APB2 clock divider */ + uint8_t ahb_exp[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + uint8_t apb1_exp[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + uint8_t apb2_exp[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + + sws = GET_BITS(RCU_CFG0, 2, 3); + switch(sws){ + /* IRC8M is selected as CK_SYS */ + case SEL_IRC8M: + cksys_freq = IRC8M_VALUE; + break; + /* HXTAL is selected as CK_SYS */ + case SEL_HXTAL: + cksys_freq = HXTAL_VALUE; + break; + /* PLL is selected as CK_SYS */ + case SEL_PLL: + /* PLL clock source selection, HXTAL or IRC8M/2 */ + pllsel = (RCU_CFG0 & RCU_CFG0_PLLSEL); + + if(RCU_PLLSRC_HXTAL == pllsel) { + /* PLL clock source is HXTAL */ + ck_src = HXTAL_VALUE; + +#if (defined(GD32F10X_MD) || defined(GD32F10X_HD) || defined(GD32F10X_XD)) + predv0sel = (RCU_CFG0 & RCU_CFG0_PREDV0); + /* PREDV0 input source clock divided by 2 */ + if(RCU_CFG0_PREDV0 == predv0sel){ + ck_src = HXTAL_VALUE/2U; + } +#elif defined(GD32F10X_CL) + predv0sel = (RCU_CFG1 & RCU_CFG1_PREDV0SEL); + /* source clock use PLL1 */ + if(RCU_PREDV0SRC_CKPLL1 == predv0sel){ + predv1 = (uint32_t)((RCU_CFG1 & RCU_CFG1_PREDV1) >> 4) + 1U; + pll1mf = (uint32_t)((RCU_CFG1 & RCU_CFG1_PLL1MF) >> 8) + 2U; + if(17U == pll1mf){ + pll1mf = 20U; + } + ck_src = (ck_src / predv1) * pll1mf; + } + predv0 = (RCU_CFG1 & RCU_CFG1_PREDV0) + 1U; + ck_src /= predv0; +#endif /* GD32F10X_HD and GD32F10X_XD */ + }else{ + /* PLL clock source is IRC8M/2 */ + ck_src = IRC8M_VALUE/2U; + } + + /* PLL multiplication factor */ + pllmf = GET_BITS(RCU_CFG0, 18, 21); + if((RCU_CFG0 & RCU_CFG0_PLLMF_4)){ + pllmf |= 0x10U; + } + if(pllmf < 15U){ + pllmf += 2U; + }else{ + pllmf += 1U; + } + + cksys_freq = ck_src * pllmf; + + #ifdef GD32F10X_CL + if(15U == pllmf){ + /* PLL source clock multiply by 6.5 */ + cksys_freq = ck_src * 6U + ck_src / 2U; + } + #endif /* GD32F10X_CL */ + + break; + /* IRC8M is selected as CK_SYS */ + default: + cksys_freq = IRC8M_VALUE; + break; + } + + /* calculate AHB clock frequency */ + idx = GET_BITS(RCU_CFG0, 4, 7); + clk_exp = ahb_exp[idx]; + ahb_freq = cksys_freq >> clk_exp; + + /* calculate APB1 clock frequency */ + idx = GET_BITS(RCU_CFG0, 8, 10); + clk_exp = apb1_exp[idx]; + apb1_freq = ahb_freq >> clk_exp; + + /* calculate APB2 clock frequency */ + idx = GET_BITS(RCU_CFG0, 11, 13); + clk_exp = apb2_exp[idx]; + apb2_freq = ahb_freq >> clk_exp; + + /* return the clocks frequency */ + switch(clock){ + case CK_SYS: + ck_freq = cksys_freq; + break; + case CK_AHB: + ck_freq = ahb_freq; + break; + case CK_APB1: + ck_freq = apb1_freq; + break; + case CK_APB2: + ck_freq = apb2_freq; + break; + default: + break; + } + return ck_freq; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_rtc.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_rtc.c new file mode 100644 index 0000000000000000000000000000000000000000..27fe2cfe7092b5c771eb3383af0eb4f001ed3419 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_rtc.c @@ -0,0 +1,277 @@ +/*! + \file gd32f10x_rtc.c + \brief RTC driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_rtc.h" + +/* RTC register high / low bits mask */ +#define RTC_HIGH_BITS_MASK ((uint32_t)0x000F0000U) /* RTC high bits mask */ +#define RTC_LOW_BITS_MASK ((uint32_t)0x0000FFFFU) /* RTC low bits mask */ + +/* RTC register high bits offset */ +#define RTC_HIGH_BITS_OFFSET ((uint32_t)16U) + +/*! + \brief enter RTC configuration mode + \param[in] none + \param[out] none + \retval none +*/ +void rtc_configuration_mode_enter(void) +{ + RTC_CTL |= RTC_CTL_CMF; +} + +/*! + \brief exit RTC configuration mode + \param[in] none + \param[out] none + \retval none +*/ +void rtc_configuration_mode_exit(void) +{ + RTC_CTL &= ~RTC_CTL_CMF; +} + +/*! + \brief set RTC counter value + \param[in] cnt: RTC counter value + \param[out] none + \retval none +*/ +void rtc_counter_set(uint32_t cnt) +{ + rtc_configuration_mode_enter(); + /* set the RTC counter high bits */ + RTC_CNTH = (cnt >> RTC_HIGH_BITS_OFFSET); + /* set the RTC counter low bits */ + RTC_CNTL = (cnt & RTC_LOW_BITS_MASK); + rtc_configuration_mode_exit(); +} + +/*! + \brief set RTC prescaler value + \param[in] psc: RTC prescaler value + \param[out] none + \retval none +*/ +void rtc_prescaler_set(uint32_t psc) +{ + rtc_configuration_mode_enter(); + /* set the RTC prescaler high bits */ + RTC_PSCH = ((psc & RTC_HIGH_BITS_MASK) >> RTC_HIGH_BITS_OFFSET); + /* set the RTC prescaler low bits */ + RTC_PSCL = (psc & RTC_LOW_BITS_MASK); + rtc_configuration_mode_exit(); +} + +/*! + \brief wait RTC last write operation finished flag set + \param[in] none + \param[out] none + \retval none +*/ +void rtc_lwoff_wait(void) +{ + /* loop until LWOFF flag is set */ + while(RESET == (RTC_CTL & RTC_CTL_LWOFF)){ + } +} + +/*! + \brief wait RTC registers synchronized flag set + \param[in] none + \param[out] none + \retval none +*/ +void rtc_register_sync_wait(void) +{ + /* clear RSYNF flag */ + RTC_CTL &= ~RTC_CTL_RSYNF; + /* loop until RSYNF flag is set */ + while(RESET == (RTC_CTL & RTC_CTL_RSYNF)){ + } +} + +/*! + \brief set RTC alarm value + \param[in] alarm: RTC alarm value + \param[out] none + \retval none +*/ +void rtc_alarm_config(uint32_t alarm) +{ + rtc_configuration_mode_enter(); + /* set the alarm high bits */ + RTC_ALRMH = (alarm >> RTC_HIGH_BITS_OFFSET); + /* set the alarm low bits */ + RTC_ALRML = (alarm & RTC_LOW_BITS_MASK); + rtc_configuration_mode_exit(); +} + +/*! + \brief get RTC counter value + \param[in] none + \param[out] none + \retval RTC counter value +*/ +uint32_t rtc_counter_get(void) +{ + uint32_t temp = 0x0U; + + temp = RTC_CNTL; + temp |= (RTC_CNTH << RTC_HIGH_BITS_OFFSET); + return temp; +} + +/*! + \brief get RTC divider value + \param[in] none + \param[out] none + \retval RTC divider value +*/ +uint32_t rtc_divider_get(void) +{ + uint32_t temp = 0x00U; + + temp = ((RTC_DIVH & RTC_DIVH_DIV) << RTC_HIGH_BITS_OFFSET); + temp |= RTC_DIVL; + return temp; +} + +/*! + \brief get RTC flag status + \param[in] flag: specify which flag status to get + only one parameter can be selected which is shown as below: + \arg RTC_FLAG_SECOND: second interrupt flag + \arg RTC_FLAG_ALARM: alarm interrupt flag + \arg RTC_FLAG_OVERFLOW: overflow interrupt flag + \arg RTC_FLAG_RSYN: registers synchronized flag + \arg RTC_FLAG_LWOF: last write operation finished flag + \param[out] none + \retval SET or RESET +*/ +FlagStatus rtc_flag_get(uint32_t flag) +{ + if(RESET != (RTC_CTL & flag)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear RTC flag status + \param[in] flag: specify which flag status to clear + one or more parameters can be selected which are shown as below: + \arg RTC_FLAG_SECOND: second interrupt flag + \arg RTC_FLAG_ALARM: alarm interrupt flag + \arg RTC_FLAG_OVERFLOW: overflow interrupt flag + \arg RTC_FLAG_RSYN: registers synchronized flag + \param[out] none + \retval none +*/ +void rtc_flag_clear(uint32_t flag) +{ + /* clear RTC flag */ + RTC_CTL &= ~flag; +} + +/*! + \brief get RTC interrupt flag status + \param[in] flag: specify which flag status to get + only one parameter can be selected which is shown as below: + \arg RTC_INT_FLAG_SECOND: second interrupt flag + \arg RTC_INT_FLAG_ALARM: alarm interrupt flag + \arg RTC_INT_FLAG_OVERFLOW: overflow interrupt flag + \param[out] none + \retval SET or RESET +*/ +FlagStatus rtc_interrupt_flag_get(uint32_t flag) +{ + if(RESET != (RTC_CTL & flag)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear RTC interrupt flag status + \param[in] flag: specify which flag status to clear + one or more parameters can be selected which are shown as below: + \arg RTC_INT_FLAG_SECOND: second interrupt flag + \arg RTC_INT_FLAG_ALARM: alarm interrupt flag + \arg RTC_INT_FLAG_OVERFLOW: overflow interrupt flag + \param[out] none + \retval none +*/ +void rtc_interrupt_flag_clear(uint32_t flag) +{ + /* clear RTC interrupt flag */ + RTC_CTL &= ~flag; +} + +/*! + \brief enable RTC interrupt + \param[in] interrupt: specify which interrupt to enbale + one or more parameters can be selected which are shown as below: + \arg RTC_INT_SECOND: second interrupt + \arg RTC_INT_ALARM: alarm interrupt + \arg RTC_INT_OVERFLOW: overflow interrupt + \param[out] none + \retval none +*/ +void rtc_interrupt_enable(uint32_t interrupt) +{ + RTC_INTEN |= interrupt; +} + +/*! + \brief disable RTC interrupt + \param[in] interrupt: specify which interrupt to disbale + one or more parameters can be selected which are shown as below: + \arg RTC_INT_SECOND: second interrupt + \arg RTC_INT_ALARM: alarm interrupt + \arg RTC_INT_OVERFLOW: overflow interrupt + \param[out] none + \retval none +*/ +void rtc_interrupt_disable(uint32_t interrupt) +{ + RTC_INTEN &= ~interrupt; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_sdio.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_sdio.c new file mode 100644 index 0000000000000000000000000000000000000000..d609f282ed70532b26a43f495af3c344d1c811d1 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_sdio.c @@ -0,0 +1,814 @@ +/*! + \file gd32f10x_sdio.c + \brief SDIO driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_sdio.h" + +#define DEFAULT_RESET_VALUE 0x00000000U + +/*! + \brief deinitialize the SDIO + \param[in] none + \param[out] none + \retval none +*/ +void sdio_deinit(void) +{ + SDIO_PWRCTL = DEFAULT_RESET_VALUE; + SDIO_CLKCTL = DEFAULT_RESET_VALUE; + SDIO_CMDAGMT = DEFAULT_RESET_VALUE; + SDIO_CMDCTL = DEFAULT_RESET_VALUE; + SDIO_DATATO = DEFAULT_RESET_VALUE; + SDIO_DATALEN = DEFAULT_RESET_VALUE; + SDIO_DATACTL = DEFAULT_RESET_VALUE; + SDIO_INTC = DEFAULT_RESET_VALUE; + SDIO_INTEN = DEFAULT_RESET_VALUE; +} + +/*! + \brief configure the SDIO clock + \param[in] clock_edge: SDIO_CLK clock edge + only one parameter can be selected which is shown as below: + \arg SDIO_SDIOCLKEDGE_RISING: select the rising edge of the SDIOCLK to generate SDIO_CLK + \arg SDIO_SDIOCLKEDGE_FALLING: select the falling edge of the SDIOCLK to generate SDIO_CLK + \param[in] clock_bypass: clock bypass + only one parameter can be selected which is shown as below: + \arg SDIO_CLOCKBYPASS_ENABLE: clock bypass + \arg SDIO_CLOCKBYPASS_DISABLE: no bypass + \param[in] clock_powersave: SDIO_CLK clock dynamic switch on/off for power saving + only one parameter can be selected which is shown as below: + \arg SDIO_CLOCKPWRSAVE_ENABLE: SDIO_CLK closed when bus is idle + \arg SDIO_CLOCKPWRSAVE_DISABLE: SDIO_CLK clock is always on + \param[in] clock_division: clock division, less than 256 + \param[out] none + \retval none +*/ +void sdio_clock_config(uint32_t clock_edge, uint32_t clock_bypass, uint32_t clock_powersave, uint16_t clock_division) +{ + uint32_t clock_config = 0U; + clock_config = SDIO_CLKCTL; + /* reset the CLKEDGE, CLKBYP, CLKPWRSAV, DIV */ + clock_config &= ~(SDIO_CLKCTL_CLKEDGE | SDIO_CLKCTL_CLKBYP | SDIO_CLKCTL_CLKPWRSAV | SDIO_CLKCTL_DIV); + + /* configure the SDIO_CLKCTL according to the parameters */ + clock_config |= (clock_edge | clock_bypass | clock_powersave | clock_division); + SDIO_CLKCTL = clock_config; +} + +/*! + \brief enable hardware clock control + \param[in] none + \param[out] none + \retval none +*/ +void sdio_hardware_clock_enable(void) +{ + SDIO_CLKCTL |= SDIO_CLKCTL_HWCLKEN; +} + +/*! + \brief disable hardware clock control + \param[in] none + \param[out] none + \retval none +*/ +void sdio_hardware_clock_disable(void) +{ + SDIO_CLKCTL &= ~SDIO_CLKCTL_HWCLKEN; +} + +/*! + \brief set different SDIO card bus mode + \param[in] bus_mode: SDIO card bus mode + only one parameter can be selected which is shown as below: + \arg SDIO_BUSMODE_1BIT: 1-bit SDIO card bus mode + \arg SDIO_BUSMODE_4BIT: 4-bit SDIO card bus mode + \arg SDIO_BUSMODE_8BIT: 8-bit SDIO card bus mode + \param[out] none + \retval none +*/ +void sdio_bus_mode_set(uint32_t bus_mode) +{ + /* reset the SDIO card bus mode bits and set according to bus_mode */ + SDIO_CLKCTL &= ~SDIO_CLKCTL_BUSMODE; + SDIO_CLKCTL |= bus_mode; +} + +/*! + \brief set the SDIO power state + \param[in] power_state: SDIO power state + only one parameter can be selected which is shown as below: + \arg SDIO_POWER_ON: SDIO power on + \arg SDIO_POWER_OFF: SDIO power off + \param[out] none + \retval none +*/ +void sdio_power_state_set(uint32_t power_state) +{ + SDIO_PWRCTL = power_state; +} + +/*! + \brief get the SDIO power state + \param[in] none + \param[out] none + \retval SDIO power state + only one parameter can be selected which is shown as below: + \arg SDIO_POWER_ON: SDIO power on + \arg SDIO_POWER_OFF: SDIO power off +*/ +uint32_t sdio_power_state_get(void) +{ + return SDIO_PWRCTL; +} + +/*! + \brief enable SDIO_CLK clock output + \param[in] none + \param[out] none + \retval none +*/ +void sdio_clock_enable(void) +{ + SDIO_CLKCTL |= SDIO_CLKCTL_CLKEN; +} + +/*! + \brief disable SDIO_CLK clock output + \param[in] none + \param[out] none + \retval none +*/ +void sdio_clock_disable(void) +{ + SDIO_CLKCTL &= ~SDIO_CLKCTL_CLKEN; +} + +/*! + \brief configure the command and response + \param[in] cmd_index: command index, refer to the related specifications + \param[in] cmd_argument: command argument, refer to the related specifications + \param[in] response_type: response type + only one parameter can be selected which is shown as below: + \arg SDIO_RESPONSETYPE_NO: no response + \arg SDIO_RESPONSETYPE_SHORT: short response + \arg SDIO_RESPONSETYPE_LONG: long response + \param[out] none + \retval none +*/ +void sdio_command_response_config(uint32_t cmd_index, uint32_t cmd_argument, uint32_t response_type) +{ + uint32_t cmd_config = 0U; + /* reset the command index, command argument and response type */ + SDIO_CMDAGMT &= ~SDIO_CMDAGMT_CMDAGMT; + SDIO_CMDAGMT = cmd_argument; + cmd_config = SDIO_CMDCTL; + cmd_config &= ~(SDIO_CMDCTL_CMDIDX | SDIO_CMDCTL_CMDRESP); + /* configure SDIO_CMDCTL and SDIO_CMDAGMT according to the parameters */ + cmd_config |= (cmd_index | response_type); + SDIO_CMDCTL = cmd_config; +} + +/*! + \brief set the command state machine wait type + \param[in] wait_type: wait type + only one parameter can be selected which is shown as below: + \arg SDIO_WAITTYPE_NO: not wait interrupt + \arg SDIO_WAITTYPE_INTERRUPT: wait interrupt + \arg SDIO_WAITTYPE_DATAEND: wait the end of data transfer + \param[out] none + \retval none +*/ +void sdio_wait_type_set(uint32_t wait_type) +{ + /* reset INTWAIT and WAITDEND */ + SDIO_CMDCTL &= ~(SDIO_CMDCTL_INTWAIT | SDIO_CMDCTL_WAITDEND); + /* set the wait type according to wait_type */ + SDIO_CMDCTL |= wait_type; +} + +/*! + \brief enable the CSM(command state machine) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_csm_enable(void) +{ + SDIO_CMDCTL |= SDIO_CMDCTL_CSMEN; +} + +/*! + \brief disable the CSM(command state machine) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_csm_disable(void) +{ + SDIO_CMDCTL &= ~SDIO_CMDCTL_CSMEN; +} + +/*! + \brief get the last response command index + \param[in] none + \param[out] none + \retval last response command index +*/ +uint8_t sdio_command_index_get(void) +{ + return (uint8_t)SDIO_RSPCMDIDX; +} + +/*! + \brief get the response for the last received command + \param[in] responsex: SDIO response + only one parameter can be selected which is shown as below: + \arg SDIO_RESPONSE0: card response[31:0]/card response[127:96] + \arg SDIO_RESPONSE1: card response[95:64] + \arg SDIO_RESPONSE2: card response[63:32] + \arg SDIO_RESPONSE3: card response[31:1], plus bit 0 + \param[out] none + \retval response for the last received command +*/ +uint32_t sdio_response_get(uint32_t responsex) +{ + uint32_t resp_content = 0U; + switch(responsex){ + case SDIO_RESPONSE0: + resp_content = SDIO_RESP0; + break; + case SDIO_RESPONSE1: + resp_content = SDIO_RESP1; + break; + case SDIO_RESPONSE2: + resp_content = SDIO_RESP2; + break; + case SDIO_RESPONSE3: + resp_content = SDIO_RESP3; + break; + default: + break; + } + return resp_content; +} + +/*! + \brief configure the data timeout, data length and data block size + \param[in] data_timeout: data timeout period in card bus clock periods + \param[in] data_length: number of data bytes to be transferred + \param[in] data_blocksize: size of data block for block transfer + only one parameter can be selected which is shown as below: + \arg SDIO_DATABLOCKSIZE_1BYTE: block size = 1 byte + \arg SDIO_DATABLOCKSIZE_2BYTES: block size = 2 bytes + \arg SDIO_DATABLOCKSIZE_4BYTES: block size = 4 bytes + \arg SDIO_DATABLOCKSIZE_8BYTES: block size = 8 bytes + \arg SDIO_DATABLOCKSIZE_16BYTES: block size = 16 bytes + \arg SDIO_DATABLOCKSIZE_32BYTES: block size = 32 bytes + \arg SDIO_DATABLOCKSIZE_64BYTES: block size = 64 bytes + \arg SDIO_DATABLOCKSIZE_128BYTES: block size = 128 bytes + \arg SDIO_DATABLOCKSIZE_256BYTES: block size = 256 bytes + \arg SDIO_DATABLOCKSIZE_512BYTES: block size = 512 bytes + \arg SDIO_DATABLOCKSIZE_1024BYTES: block size = 1024 bytes + \arg SDIO_DATABLOCKSIZE_2048BYTES: block size = 2048 bytes + \arg SDIO_DATABLOCKSIZE_4096BYTES: block size = 4096 bytes + \arg SDIO_DATABLOCKSIZE_8192BYTES: block size = 8192 bytes + \arg SDIO_DATABLOCKSIZE_16384BYTES: block size = 16384 bytes + \param[out] none + \retval none +*/ +void sdio_data_config(uint32_t data_timeout, uint32_t data_length, uint32_t data_blocksize) +{ + /* reset data timeout, data length and data block size */ + SDIO_DATATO &= ~SDIO_DATATO_DATATO; + SDIO_DATALEN &= ~SDIO_DATALEN_DATALEN; + SDIO_DATACTL &= ~SDIO_DATACTL_BLKSZ; + /* configure the related parameters of data */ + SDIO_DATATO = data_timeout; + SDIO_DATALEN = data_length; + SDIO_DATACTL |= data_blocksize; +} + +/*! + \brief configure the data transfer mode and direction + \param[in] transfer_mode: mode of data transfer + only one parameter can be selected which is shown as below: + \arg SDIO_TRANSMODE_BLOCK: block transfer + \arg SDIO_TRANSMODE_STREAM: stream transfer or SDIO multibyte transfer + \param[in] transfer_direction: data transfer direction, read or write + only one parameter can be selected which is shown as below: + \arg SDIO_TRANSDIRECTION_TOCARD: write data to card + \arg SDIO_TRANSDIRECTION_TOSDIO: read data from card + \param[out] none + \retval none +*/ +void sdio_data_transfer_config(uint32_t transfer_mode, uint32_t transfer_direction) +{ + uint32_t data_trans = 0U; + /* reset the data transfer mode, transfer direction and set according to the parameters */ + data_trans = SDIO_DATACTL; + data_trans &= ~(SDIO_DATACTL_TRANSMOD | SDIO_DATACTL_DATADIR); + data_trans |= (transfer_mode | transfer_direction); + SDIO_DATACTL = data_trans; +} + +/*! + \brief enable the DSM(data state machine) for data transfer + \param[in] none + \param[out] none + \retval none +*/ +void sdio_dsm_enable(void) +{ + SDIO_DATACTL |= SDIO_DATACTL_DATAEN; +} + +/*! + \brief disable the DSM(data state machine) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_dsm_disable(void) +{ + SDIO_DATACTL &= ~SDIO_DATACTL_DATAEN; +} + +/*! + \brief write data(one word) to the transmit FIFO + \param[in] data: 32-bit data write to card + \param[out] none + \retval none +*/ +void sdio_data_write(uint32_t data) +{ + SDIO_FIFO = data; +} + +/*! + \brief read data(one word) from the receive FIFO + \param[in] none + \param[out] none + \retval received data +*/ +uint32_t sdio_data_read(void) +{ + return SDIO_FIFO; +} + +/*! + \brief get the number of remaining data bytes to be transferred to card + \param[in] none + \param[out] none + \retval number of remaining data bytes to be transferred +*/ +uint32_t sdio_data_counter_get(void) +{ + return SDIO_DATACNT; +} + +/*! + \brief get the number of words remaining to be written or read from FIFO + \param[in] none + \param[out] none + \retval remaining number of words +*/ +uint32_t sdio_fifo_counter_get(void) +{ + return SDIO_FIFOCNT; +} + +/*! + \brief enable the DMA request for SDIO + \param[in] none + \param[out] none + \retval none +*/ +void sdio_dma_enable(void) +{ + SDIO_DATACTL |= SDIO_DATACTL_DMAEN; +} + +/*! + \brief disable the DMA request for SDIO + \param[in] none + \param[out] none + \retval none +*/ +void sdio_dma_disable(void) +{ + SDIO_DATACTL &= ~SDIO_DATACTL_DMAEN; +} + +/*! + \brief get the flags state of SDIO + \param[in] flag: flags state of SDIO + only one parameter can be selected which is shown as below: + \arg SDIO_FLAG_CCRCERR: command response received (CRC check failed) flag + \arg SDIO_FLAG_DTCRCERR: data block sent/received (CRC check failed) flag + \arg SDIO_FLAG_CMDTMOUT: command response timeout flag + \arg SDIO_FLAG_DTTMOUT: data timeout flag + \arg SDIO_FLAG_TXURE: transmit FIFO underrun error occurs flag + \arg SDIO_FLAG_RXORE: received FIFO overrun error occurs flag + \arg SDIO_FLAG_CMDRECV: command response received (CRC check passed) flag + \arg SDIO_FLAG_CMDSEND: command sent (no response required) flag + \arg SDIO_FLAG_DTEND: data end (data counter, SDIO_DATACNT, is zero) flag + \arg SDIO_FLAG_STBITE: start bit error in the bus flag + \arg SDIO_FLAG_DTBLKEND: data block sent/received (CRC check passed) flag + \arg SDIO_FLAG_CMDRUN: command transmission in progress flag + \arg SDIO_FLAG_TXRUN: data transmission in progress flag + \arg SDIO_FLAG_RXRUN: data reception in progress flag + \arg SDIO_FLAG_TFH: transmit FIFO is half empty flag: at least 8 words can be written into the FIFO + \arg SDIO_FLAG_RFH: receive FIFO is half full flag: at least 8 words can be read in the FIFO + \arg SDIO_FLAG_TFF: transmit FIFO is full flag + \arg SDIO_FLAG_RFF: receive FIFO is full flag + \arg SDIO_FLAG_TFE: transmit FIFO is empty flag + \arg SDIO_FLAG_RFE: receive FIFO is empty flag + \arg SDIO_FLAG_TXDTVAL: data is valid in transmit FIFO flag + \arg SDIO_FLAG_RXDTVAL: data is valid in receive FIFO flag + \arg SDIO_FLAG_SDIOINT: SD I/O interrupt received flag + \arg SDIO_FLAG_ATAEND: CE-ATA command completion signal received (only for CMD61) flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus sdio_flag_get(uint32_t flag) +{ + FlagStatus temp_flag = RESET; + if(RESET != (SDIO_STAT & flag)){ + temp_flag = SET; + } + return temp_flag; +} + +/*! + \brief clear the pending flags of SDIO + \param[in] flag: flags state of SDIO + only one parameter can be selected which is shown as below: + \arg SDIO_FLAG_CCRCERR: command response received (CRC check failed) flag + \arg SDIO_FLAG_DTCRCERR: data block sent/received (CRC check failed) flag + \arg SDIO_FLAG_CMDTMOUT: command response timeout flag + \arg SDIO_FLAG_DTTMOUT: data timeout flag + \arg SDIO_FLAG_TXURE: transmit FIFO underrun error occurs flag + \arg SDIO_FLAG_RXORE: received FIFO overrun error occurs flag + \arg SDIO_FLAG_CMDRECV: command response received (CRC check passed) flag + \arg SDIO_FLAG_CMDSEND: command sent (no response required) flag + \arg SDIO_FLAG_DTEND: data end (data counter, SDIO_DATACNT, is zero) flag + \arg SDIO_FLAG_STBITE: start bit error in the bus flag + \arg SDIO_FLAG_DTBLKEND: data block sent/received (CRC check passed) flag + \arg SDIO_FLAG_SDIOINT: SD I/O interrupt received flag + \arg SDIO_FLAG_ATAEND: CE-ATA command completion signal received (only for CMD61) flag + \param[out] none + \retval none +*/ +void sdio_flag_clear(uint32_t flag) +{ + SDIO_INTC = flag; +} + +/*! + \brief enable the SDIO interrupt + \param[in] int_flag: interrupt flags state of SDIO + only one parameter can be selected which is shown as below: + \arg SDIO_INT_CCRCERR: SDIO CCRCERR interrupt + \arg SDIO_INT_DTCRCERR: SDIO DTCRCERR interrupt + \arg SDIO_INT_CMDTMOUT: SDIO CMDTMOUT interrupt + \arg SDIO_INT_DTTMOUT: SDIO DTTMOUT interrupt + \arg SDIO_INT_TXURE: SDIO TXURE interrupt + \arg SDIO_INT_RXORE: SDIO RXORE interrupt + \arg SDIO_INT_CMDRECV: SDIO CMDRECV interrupt + \arg SDIO_INT_CMDSEND: SDIO CMDSEND interrupt + \arg SDIO_INT_DTEND: SDIO DTEND interrupt + \arg SDIO_INT_STBITE: SDIO STBITE interrupt + \arg SDIO_INT_DTBLKEND: SDIO DTBLKEND interrupt + \arg SDIO_INT_CMDRUN: SDIO CMDRUN interrupt + \arg SDIO_INT_TXRUN: SDIO TXRUN interrupt + \arg SDIO_INT_RXRUN: SDIO RXRUN interrupt + \arg SDIO_INT_TFH: SDIO TFH interrupt + \arg SDIO_INT_RFH: SDIO RFH interrupt + \arg SDIO_INT_TFF: SDIO TFF interrupt + \arg SDIO_INT_RFF: SDIO RFF interrupt + \arg SDIO_INT_TFE: SDIO TFE interrupt + \arg SDIO_INT_RFE: SDIO RFE interrupt + \arg SDIO_INT_TXDTVAL: SDIO TXDTVAL interrupt + \arg SDIO_INT_RXDTVAL: SDIO RXDTVAL interrupt + \arg SDIO_INT_SDIOINT: SDIO SDIOINT interrupt + \arg SDIO_INT_ATAEND: SDIO ATAEND interrupt + \param[out] none + \retval none +*/ +void sdio_interrupt_enable(uint32_t int_flag) +{ + SDIO_INTEN |= int_flag; +} + +/*! + \brief disable the SDIO interrupt + \param[in] int_flag: interrupt flags state of SDIO + only one parameter can be selected which is shown as below: + \arg SDIO_INT_CCRCERR: SDIO CCRCERR interrupt + \arg SDIO_INT_DTCRCERR: SDIO DTCRCERR interrupt + \arg SDIO_INT_CMDTMOUT: SDIO CMDTMOUT interrupt + \arg SDIO_INT_DTTMOUT: SDIO DTTMOUT interrupt + \arg SDIO_INT_TXURE: SDIO TXURE interrupt + \arg SDIO_INT_RXORE: SDIO RXORE interrupt + \arg SDIO_INT_CMDRECV: SDIO CMDRECV interrupt + \arg SDIO_INT_CMDSEND: SDIO CMDSEND interrupt + \arg SDIO_INT_DTEND: SDIO DTEND interrupt + \arg SDIO_INT_STBITE: SDIO STBITE interrupt + \arg SDIO_INT_DTBLKEND: SDIO DTBLKEND interrupt + \arg SDIO_INT_CMDRUN: SDIO CMDRUN interrupt + \arg SDIO_INT_TXRUN: SDIO TXRUN interrupt + \arg SDIO_INT_RXRUN: SDIO RXRUN interrupt + \arg SDIO_INT_TFH: SDIO TFH interrupt + \arg SDIO_INT_RFH: SDIO RFH interrupt + \arg SDIO_INT_TFF: SDIO TFF interrupt + \arg SDIO_INT_RFF: SDIO RFF interrupt + \arg SDIO_INT_TFE: SDIO TFE interrupt + \arg SDIO_INT_RFE: SDIO RFE interrupt + \arg SDIO_INT_TXDTVAL: SDIO TXDTVAL interrupt + \arg SDIO_INT_RXDTVAL: SDIO RXDTVAL interrupt + \arg SDIO_INT_SDIOINT: SDIO SDIOINT interrupt + \arg SDIO_INT_ATAEND: SDIO ATAEND interrupt + \param[out] none + \retval none +*/ +void sdio_interrupt_disable(uint32_t int_flag) +{ + SDIO_INTEN &= ~int_flag; +} + +/*! + \brief get the interrupt flags state of SDIO + \param[in] int_flag: interrupt flags state of SDIO + only one parameter can be selected which is shown as below: + \arg SDIO_INT_FLAG_CCRCERR: SDIO CCRCERR interrupt + \arg SDIO_INT_FLAG_DTCRCERR: SDIO DTCRCERR interrupt + \arg SDIO_INT_FLAG_CMDTMOUT: SDIO CMDTMOUT interrupt + \arg SDIO_INT_FLAG_DTTMOUT: SDIO DTTMOUT interrupt + \arg SDIO_INT_FLAG_TXURE: SDIO TXURE interrupt + \arg SDIO_INT_FLAG_RXORE: SDIO RXORE interrupt + \arg SDIO_INT_FLAG_CMDRECV: SDIO CMDRECV interrupt + \arg SDIO_INT_FLAG_CMDSEND: SDIO CMDSEND interrupt + \arg SDIO_INT_FLAG_DTEND: SDIO DTEND interrupt + \arg SDIO_INT_FLAG_STBITE: SDIO STBITE interrupt + \arg SDIO_INT_FLAG_DTBLKEND: SDIO DTBLKEND interrupt + \arg SDIO_INT_FLAG_CMDRUN: SDIO CMDRUN interrupt + \arg SDIO_INT_FLAG_TXRUN: SDIO TXRUN interrupt + \arg SDIO_INT_FLAG_RXRUN: SDIO RXRUN interrupt + \arg SDIO_INT_FLAG_TFH: SDIO TFH interrupt + \arg SDIO_INT_FLAG_RFH: SDIO RFH interrupt + \arg SDIO_INT_FLAG_TFF: SDIO TFF interrupt + \arg SDIO_INT_FLAG_RFF: SDIO RFF interrupt + \arg SDIO_INT_FLAG_TFE: SDIO TFE interrupt + \arg SDIO_INT_FLAG_RFE: SDIO RFE interrupt + \arg SDIO_INT_FLAG_TXDTVAL: SDIO TXDTVAL interrupt + \arg SDIO_INT_FLAG_RXDTVAL: SDIO RXDTVAL interrupt + \arg SDIO_INT_FLAG_SDIOINT: SDIO SDIOINT interrupt + \arg SDIO_INT_FLAG_ATAEND: SDIO ATAEND interrupt + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus sdio_interrupt_flag_get(uint32_t int_flag) +{ + uint32_t state = 0U; + state = SDIO_STAT; + if(state & int_flag){ + state = SDIO_INTEN; + /* check whether the corresponding bit in SDIO_INTEN is set or not */ + if(state & int_flag){ + return SET; + } + } + return RESET; +} + +/*! + \brief clear the interrupt pending flags of SDIO + \param[in] int_flag: interrupt flags state of SDIO + only one parameter can be selected which is shown as below: + \arg SDIO_INT_FLAG_CCRCERR: command response received (CRC check failed) flag + \arg SDIO_INT_FLAG_DTCRCERR: data block sent/received (CRC check failed) flag + \arg SDIO_INT_FLAG_CMDTMOUT: command response timeout flag + \arg SDIO_INT_FLAG_DTTMOUT: data timeout flag + \arg SDIO_INT_FLAG_TXURE: transmit FIFO underrun error occurs flag + \arg SDIO_INT_FLAG_RXORE: received FIFO overrun error occurs flag + \arg SDIO_INT_FLAG_CMDRECV: command response received (CRC check passed) flag + \arg SDIO_INT_FLAG_CMDSEND: command sent (no response required) flag + \arg SDIO_INT_FLAG_DTEND: data end (data counter, SDIO_DATACNT, is zero) flag + \arg SDIO_INT_FLAG_STBITE: start bit error in the bus flag + \arg SDIO_INT_FLAG_DTBLKEND: data block sent/received (CRC check passed) flag + \arg SDIO_INT_FLAG_SDIOINT: SD I/O interrupt received flag + \arg SDIO_INT_FLAG_ATAEND: CE-ATA command completion signal received (only for CMD61) flag + \param[out] none + \retval none +*/ +void sdio_interrupt_flag_clear(uint32_t int_flag) +{ + SDIO_INTC = int_flag; +} + +/*! + \brief enable the read wait mode(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_readwait_enable(void) +{ + SDIO_DATACTL |= SDIO_DATACTL_RWEN; +} + +/*! + \brief disable the read wait mode(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_readwait_disable(void) +{ + SDIO_DATACTL &= ~SDIO_DATACTL_RWEN; +} + +/*! + \brief enable the function that stop the read wait process(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_stop_readwait_enable(void) +{ + SDIO_DATACTL |= SDIO_DATACTL_RWSTOP; +} + +/*! + \brief disable the function that stop the read wait process(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_stop_readwait_disable(void) +{ + SDIO_DATACTL &= ~SDIO_DATACTL_RWSTOP; +} + +/*! + \brief set the read wait type(SD I/O only) + \param[in] readwait_type: SD I/O read wait type + only one parameter can be selected which is shown as below: + \arg SDIO_READWAITTYPE_CLK: read wait control by stopping SDIO_CLK + \arg SDIO_READWAITTYPE_DAT2: read wait control using SDIO_DAT[2] + \param[out] none + \retval none +*/ +void sdio_readwait_type_set(uint32_t readwait_type) +{ + if(SDIO_READWAITTYPE_CLK == readwait_type){ + SDIO_DATACTL |= SDIO_DATACTL_RWTYPE; + }else{ + SDIO_DATACTL &= ~SDIO_DATACTL_RWTYPE; + } +} + +/*! + \brief enable the SD I/O mode specific operation(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_operation_enable(void) +{ + SDIO_DATACTL |= SDIO_DATACTL_IOEN; +} + +/*! + \brief disable the SD I/O mode specific operation(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_operation_disable(void) +{ + SDIO_DATACTL &= ~SDIO_DATACTL_IOEN; +} + +/*! + \brief enable the SD I/O suspend operation(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_suspend_enable(void) +{ + SDIO_CMDCTL |= SDIO_CMDCTL_SUSPEND; +} + +/*! + \brief disable the SD I/O suspend operation(SD I/O only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_suspend_disable(void) +{ + SDIO_CMDCTL &= ~SDIO_CMDCTL_SUSPEND; +} + +/*! + \brief enable the CE-ATA command(CE-ATA only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_ceata_command_enable(void) +{ + SDIO_CMDCTL |= SDIO_CMDCTL_ATAEN; +} + +/*! + \brief disable the CE-ATA command(CE-ATA only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_ceata_command_disable(void) +{ + SDIO_CMDCTL &= ~SDIO_CMDCTL_ATAEN; +} + +/*! + \brief enable the CE-ATA interrupt(CE-ATA only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_ceata_interrupt_enable(void) +{ + SDIO_CMDCTL &= ~SDIO_CMDCTL_NINTEN; +} + +/*! + \brief disable the CE-ATA interrupt(CE-ATA only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_ceata_interrupt_disable(void) +{ + SDIO_CMDCTL |= SDIO_CMDCTL_NINTEN; +} + +/*! + \brief enable the CE-ATA command completion signal(CE-ATA only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_ceata_command_completion_enable(void) +{ + SDIO_CMDCTL |= SDIO_CMDCTL_ENCMDC; +} + +/*! + \brief disable the CE-ATA command completion signal(CE-ATA only) + \param[in] none + \param[out] none + \retval none +*/ +void sdio_ceata_command_completion_disable(void) +{ + SDIO_CMDCTL &= ~SDIO_CMDCTL_ENCMDC; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_spi.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_spi.c new file mode 100644 index 0000000000000000000000000000000000000000..c0fb893ccc26590fe4dfa3bedc3a40e79fc9a805 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_spi.c @@ -0,0 +1,718 @@ +/*! + \file gd32f10x_spi.c + \brief SPI driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_spi.h" + +/* SPI/I2S parameter initialization mask */ +#define SPI_INIT_MASK ((uint32_t)0x00003040U) /*!< SPI parameter initialization mask */ +#define I2S_INIT_MASK ((uint32_t)0x0000F047U) /*!< I2S parameter initialization mask */ + +/* I2S clock source selection, multiplication and division mask */ +#define I2S1_CLOCK_SEL ((uint32_t)0x00020000U) /* I2S1 clock source selection */ +#define I2S2_CLOCK_SEL ((uint32_t)0x00040000U) /* I2S2 clock source selection */ +#define I2S_CLOCK_MUL_MASK ((uint32_t)0x0000F000U) /* I2S clock multiplication mask */ +#define I2S_CLOCK_DIV_MASK ((uint32_t)0x000000F0U) /* I2S clock division mask */ + +/* default value and offset */ +#define SPI_I2SPSC_DEFAULT_VALUE ((uint32_t)0x00000002U) /* default value of SPI_I2SPSC register */ +#define RCU_CFG1_PREDV1_OFFSET 4U /* PREDV1 offset in RCU_CFG1 */ +#define RCU_CFG1_PLL2MF_OFFSET 12U /* PLL2MF offset in RCU_CFG1 */ + +/*! + \brief reset SPI and I2S + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_i2s_deinit(uint32_t spi_periph) +{ + switch(spi_periph){ + case SPI0: + /* reset SPI0 */ + rcu_periph_reset_enable(RCU_SPI0RST); + rcu_periph_reset_disable(RCU_SPI0RST); + break; + case SPI1: + /* reset SPI1 and I2S1 */ + rcu_periph_reset_enable(RCU_SPI1RST); + rcu_periph_reset_disable(RCU_SPI1RST); + break; + case SPI2: + /* reset SPI2 and I2S2 */ + rcu_periph_reset_enable(RCU_SPI2RST); + rcu_periph_reset_disable(RCU_SPI2RST); + break; + default : + break; + } +} + +/*! + \brief initialize the parameters of SPI struct with the default values + \param[in] spi_struct: SPI parameter stuct + \param[out] none + \retval none +*/ +void spi_struct_para_init(spi_parameter_struct* spi_struct) +{ + /* set the SPI struct with the default values */ + spi_struct->device_mode = SPI_SLAVE; + spi_struct->trans_mode = SPI_TRANSMODE_FULLDUPLEX; + spi_struct->frame_size = SPI_FRAMESIZE_8BIT; + spi_struct->nss = SPI_NSS_HARD; + spi_struct->clock_polarity_phase = SPI_CK_PL_LOW_PH_1EDGE; + spi_struct->prescale = SPI_PSC_2; +} + +/*! + \brief initialize SPI parameter + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] spi_struct: SPI parameter initialization stuct members of the structure + and the member values are shown as below: + device_mode: SPI_MASTER, SPI_SLAVE + trans_mode: SPI_TRANSMODE_FULLDUPLEX, SPI_TRANSMODE_RECEIVEONLY, + SPI_TRANSMODE_BDRECEIVE, SPI_TRANSMODE_BDTRANSMIT + frame_size: SPI_FRAMESIZE_16BIT, SPI_FRAMESIZE_8BIT + nss: SPI_NSS_SOFT, SPI_NSS_HARD + endian: SPI_ENDIAN_MSB, SPI_ENDIAN_LSB + clock_polarity_phase: SPI_CK_PL_LOW_PH_1EDGE, SPI_CK_PL_HIGH_PH_1EDGE + SPI_CK_PL_LOW_PH_2EDGE, SPI_CK_PL_HIGH_PH_2EDGE + prescale: SPI_PSC_n (n=2,4,8,16,32,64,128,256) + \param[out] none + \retval none +*/ +void spi_init(uint32_t spi_periph, spi_parameter_struct* spi_struct) +{ + uint32_t reg = 0U; + reg = SPI_CTL0(spi_periph); + reg &= SPI_INIT_MASK; + + /* select SPI as master or slave */ + reg |= spi_struct->device_mode; + /* select SPI transfer mode */ + reg |= spi_struct->trans_mode; + /* select SPI frame size */ + reg |= spi_struct->frame_size; + /* select SPI NSS use hardware or software */ + reg |= spi_struct->nss; + /* select SPI LSB or MSB */ + reg |= spi_struct->endian; + /* select SPI polarity and phase */ + reg |= spi_struct->clock_polarity_phase; + /* select SPI prescale to adjust transmit speed */ + reg |= spi_struct->prescale; + + /* write to SPI_CTL0 register */ + SPI_CTL0(spi_periph) = (uint32_t)reg; + + SPI_I2SCTL(spi_periph) &= (uint32_t)(~SPI_I2SCTL_I2SSEL); +} + +/*! + \brief enable SPI + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_enable(uint32_t spi_periph) +{ + SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_SPIEN; +} + +/*! + \brief disable SPI + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_disable(uint32_t spi_periph) +{ + SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_SPIEN); +} + +/*! + \brief initialize I2S parameter + \param[in] spi_periph: SPIx(x=1,2) + \param[in] mode: I2S operation mode + only one parameter can be selected which is shown as below: + \arg I2S_MODE_SLAVETX: I2S slave transmit mode + \arg I2S_MODE_SLAVERX: I2S slave receive mode + \arg I2S_MODE_MASTERTX: I2S master transmit mode + \arg I2S_MODE_MASTERRX: I2S master receive mode + \param[in] standard: I2S standard + only one parameter can be selected which is shown as below: + \arg I2S_STD_PHILLIPS: I2S phillips standard + \arg I2S_STD_MSB: I2S MSB standard + \arg I2S_STD_LSB: I2S LSB standard + \arg I2S_STD_PCMSHORT: I2S PCM short standard + \arg I2S_STD_PCMLONG: I2S PCM long standard + \param[in] ckpl: I2S idle state clock polarity + only one parameter can be selected which is shown as below: + \arg I2S_CKPL_LOW: I2S clock polarity low level + \arg I2S_CKPL_HIGH: I2S clock polarity high level + \param[out] none + \retval none +*/ +void i2s_init(uint32_t spi_periph, uint32_t mode, uint32_t standard, uint32_t ckpl) +{ + uint32_t reg = 0U; + reg = SPI_I2SCTL(spi_periph); + reg &= I2S_INIT_MASK; + + /* enable I2S mode */ + reg |= (uint32_t)SPI_I2SCTL_I2SSEL; + /* select I2S mode */ + reg |= (uint32_t)mode; + /* select I2S standard */ + reg |= (uint32_t)standard; + /* select I2S polarity */ + reg |= (uint32_t)ckpl; + + /* write to SPI_I2SCTL register */ + SPI_I2SCTL(spi_periph) = (uint32_t)reg; +} + +/*! + \brief configure I2S prescaler + \param[in] spi_periph: SPIx(x=1,2) + \param[in] audiosample: I2S audio sample rate + only one parameter can be selected which is shown as below: + \arg I2S_AUDIOSAMPLE_8K: audio sample rate is 8KHz + \arg I2S_AUDIOSAMPLE_11K: audio sample rate is 11KHz + \arg I2S_AUDIOSAMPLE_16K: audio sample rate is 16KHz + \arg I2S_AUDIOSAMPLE_22K: audio sample rate is 22KHz + \arg I2S_AUDIOSAMPLE_32K: audio sample rate is 32KHz + \arg I2S_AUDIOSAMPLE_44K: audio sample rate is 44KHz + \arg I2S_AUDIOSAMPLE_48K: audio sample rate is 48KHz + \arg I2S_AUDIOSAMPLE_96K: audio sample rate is 96KHz + \arg I2S_AUDIOSAMPLE_192K: audio sample rate is 192KHz + \param[in] frameformat: I2S data length and channel length + only one parameter can be selected which is shown as below: + \arg I2S_FRAMEFORMAT_DT16B_CH16B: I2S data length is 16 bit and channel length is 16 bit + \arg I2S_FRAMEFORMAT_DT16B_CH32B: I2S data length is 16 bit and channel length is 32 bit + \arg I2S_FRAMEFORMAT_DT24B_CH32B: I2S data length is 24 bit and channel length is 32 bit + \arg I2S_FRAMEFORMAT_DT32B_CH32B: I2S data length is 32 bit and channel length is 32 bit + \param[in] mckout: I2S master clock output + only one parameter can be selected which is shown as below: + \arg I2S_MCKOUT_ENABLE: I2S master clock output enable + \arg I2S_MCKOUT_DISABLE: I2S master clock output disable + \param[out] none + \retval none +*/ +void i2s_psc_config(uint32_t spi_periph, uint32_t audiosample, uint32_t frameformat, uint32_t mckout) +{ + uint32_t i2sdiv = 2U, i2sof = 0U; + uint32_t clks = 0U; + uint32_t i2sclock = 0U; + + /* deinit SPI_I2SPSC register */ + SPI_I2SPSC(spi_periph) = SPI_I2SPSC_DEFAULT_VALUE; + +#ifdef GD32F10X_CL + /* get the I2S clock source */ + if(SPI1 == ((uint32_t)spi_periph)){ + /* I2S1 clock source selection */ + clks = I2S1_CLOCK_SEL; + }else{ + /* I2S2 clock source selection */ + clks = I2S2_CLOCK_SEL; + } + + if(0U != (RCU_CFG1 & clks)){ + /* get RCU PLL2 clock multiplication factor */ + clks = (uint32_t)((RCU_CFG1 & I2S_CLOCK_MUL_MASK) >> RCU_CFG1_PLL2MF_OFFSET); + + if((clks > 5U) && (clks < 15U)){ + /* multiplier is between 8 and 14 */ + clks += 2U; + }else{ + if(15U == clks){ + /* multiplier is 20 */ + clks = 20U; + } + } + + /* get the PREDV1 value */ + i2sclock = (uint32_t)(((RCU_CFG1 & I2S_CLOCK_DIV_MASK) >> RCU_CFG1_PREDV1_OFFSET) + 1U); + /* calculate I2S clock based on PLL2 and PREDV1 */ + i2sclock = (uint32_t)((HXTAL_VALUE / i2sclock) * clks * 2U); + }else{ + /* get system clock */ + i2sclock = rcu_clock_freq_get(CK_SYS); + } +#else + /* get system clock */ + i2sclock = rcu_clock_freq_get(CK_SYS); +#endif /* GD32F10X_CL */ + + /* config the prescaler depending on the mclk output state, the frame format and audio sample rate */ + if(I2S_MCKOUT_ENABLE == mckout){ + clks = (uint32_t)(((i2sclock / 256U) * 10U) / audiosample); + }else{ + if(I2S_FRAMEFORMAT_DT16B_CH16B == frameformat){ + clks = (uint32_t)(((i2sclock / 32U) *10U ) / audiosample); + }else{ + clks = (uint32_t)(((i2sclock / 64U) *10U ) / audiosample); + } + } + + /* remove the floating point */ + clks = (clks + 5U) / 10U; + i2sof = (clks & 0x00000001U); + i2sdiv = ((clks - i2sof) / 2U); + i2sof = (i2sof << 8U); + + /* set the default values */ + if((i2sdiv < 2U) || (i2sdiv > 255U)){ + i2sdiv = 2U; + i2sof = 0U; + } + + /* configure SPI_I2SPSC */ + SPI_I2SPSC(spi_periph) = (uint32_t)(i2sdiv | i2sof | mckout); + + /* clear SPI_I2SCTL_DTLEN and SPI_I2SCTL_CHLEN bits */ + SPI_I2SCTL(spi_periph) &= (uint32_t)(~(SPI_I2SCTL_DTLEN | SPI_I2SCTL_CHLEN)); + /* configure data frame format */ + SPI_I2SCTL(spi_periph) |= (uint32_t)frameformat; +} + +/*! + \brief enable I2S + \param[in] spi_periph: SPIx(x=1,2) + \param[out] none + \retval none +*/ +void i2s_enable(uint32_t spi_periph) +{ + SPI_I2SCTL(spi_periph) |= (uint32_t)SPI_I2SCTL_I2SEN; +} + +/*! + \brief disable I2S + \param[in] spi_periph: SPIx(x=1,2) + \param[out] none + \retval none +*/ +void i2s_disable(uint32_t spi_periph) +{ + SPI_I2SCTL(spi_periph) &= (uint32_t)(~SPI_I2SCTL_I2SEN); +} + +/*! + \brief enable SPI NSS output + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_nss_output_enable(uint32_t spi_periph) +{ + SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_NSSDRV; +} + +/*! + \brief disable SPI NSS output + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_nss_output_disable(uint32_t spi_periph) +{ + SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_NSSDRV); +} + +/*! + \brief SPI NSS pin high level in software mode + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_nss_internal_high(uint32_t spi_periph) +{ + SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_SWNSS; +} + +/*! + \brief SPI NSS pin low level in software mode + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_nss_internal_low(uint32_t spi_periph) +{ + SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_SWNSS); +} + +/*! + \brief enable SPI DMA send or receive + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] dma: SPI DMA mode + only one parameter can be selected which is shown as below: + \arg SPI_DMA_TRANSMIT: SPI transmit data using DMA + \arg SPI_DMA_RECEIVE: SPI receive data using DMA + \param[out] none + \retval none +*/ +void spi_dma_enable(uint32_t spi_periph, uint8_t dma) +{ + if(SPI_DMA_TRANSMIT == dma){ + SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_DMATEN; + }else{ + SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_DMAREN; + } +} + +/*! + \brief disable SPI DMA send or receive + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] dma: SPI DMA mode + only one parameter can be selected which is shown as below: + \arg SPI_DMA_TRANSMIT: SPI transmit data using DMA + \arg SPI_DMA_RECEIVE: SPI receive data using DMA + \param[out] none + \retval none +*/ +void spi_dma_disable(uint32_t spi_periph, uint8_t dma) +{ + if(SPI_DMA_TRANSMIT == dma){ + SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_DMATEN); + }else{ + SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_DMAREN); + } +} + +/*! + \brief configure SPI/I2S data frame format + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] frame_format: SPI frame size + only one parameter can be selected which is shown as below: + \arg SPI_FRAMESIZE_16BIT: SPI frame size is 16 bits + \arg SPI_FRAMESIZE_8BIT: SPI frame size is 8 bits + \param[out] none + \retval none +*/ +void spi_i2s_data_frame_format_config(uint32_t spi_periph, uint16_t frame_format) +{ + /* clear SPI_CTL0_FF16 bit */ + SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_FF16); + /* configure SPI_CTL0_FF16 bit */ + SPI_CTL0(spi_periph) |= (uint32_t)frame_format; +} + +/*! + \brief SPI transmit data + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] data: 16-bit data + \param[out] none + \retval none +*/ +void spi_i2s_data_transmit(uint32_t spi_periph, uint16_t data) +{ + SPI_DATA(spi_periph) = (uint32_t)data; +} + +/*! + \brief SPI receive data + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval 16-bit data +*/ +uint16_t spi_i2s_data_receive(uint32_t spi_periph) +{ + return ((uint16_t)SPI_DATA(spi_periph)); +} + +/*! + \brief configure SPI bidirectional transfer direction + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] transfer_direction: SPI transfer direction + only one parameter can be selected which is shown as below: + \arg SPI_BIDIRECTIONAL_TRANSMIT: SPI work in transmit-only mode + \arg SPI_BIDIRECTIONAL_RECEIVE: SPI work in receive-only mode + \param[out] none + \retval none +*/ +void spi_bidirectional_transfer_config(uint32_t spi_periph, uint32_t transfer_direction) +{ + if(SPI_BIDIRECTIONAL_TRANSMIT == transfer_direction){ + /* set the transmit only mode */ + SPI_CTL0(spi_periph) |= (uint32_t)SPI_BIDIRECTIONAL_TRANSMIT; + }else{ + /* set the receive only mode */ + SPI_CTL0(spi_periph) &= SPI_BIDIRECTIONAL_RECEIVE; + } +} + +/*! + \brief set CRC polynomial + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] crc_poly: CRC polynomial value + \param[out] none + \retval none +*/ +void spi_crc_polynomial_set(uint32_t spi_periph, uint16_t crc_poly) +{ + /* enable SPI CRC */ + SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_CRCEN; + /* set SPI CRC polynomial */ + SPI_CRCPOLY(spi_periph) = (uint32_t)crc_poly; +} + +/*! + \brief get SPI CRC polynomial + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval 16-bit CRC polynomial +*/ +uint16_t spi_crc_polynomial_get(uint32_t spi_periph) +{ + return ((uint16_t)SPI_CRCPOLY(spi_periph)); +} + +/*! + \brief turn on CRC function + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_crc_on(uint32_t spi_periph) +{ + SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_CRCEN; +} + +/*! + \brief turn off CRC function + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_crc_off(uint32_t spi_periph) +{ + SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_CRCEN); +} +/*! + \brief SPI next data is CRC value + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_crc_next(uint32_t spi_periph) +{ + SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_CRCNT; +} + +/*! + \brief get SPI CRC send value or receive value + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] crc: SPI crc value + only one parameter can be selected which is shown as below: + \arg SPI_CRC_TX: get transmit crc value + \arg SPI_CRC_RX: get receive crc value + \param[out] none + \retval 16-bit CRC value +*/ +uint16_t spi_crc_get(uint32_t spi_periph, uint8_t crc) +{ + if(SPI_CRC_TX == crc){ + return ((uint16_t)(SPI_TCRC(spi_periph))); + }else{ + return ((uint16_t)(SPI_RCRC(spi_periph))); + } +} + +/*! + \brief enable SPI and I2S interrupt + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] interrupt: SPI/I2S interrupt + only one parameter can be selected which is shown as below: + \arg SPI_I2S_INT_TBE: transmit buffer empty interrupt + \arg SPI_I2S_INT_RBNE: receive buffer not empty interrupt + \arg SPI_I2S_INT_ERR: CRC error,configuration error,reception overrun error, + transmission underrun error and format error interrupt + \param[out] none + \retval none +*/ +void spi_i2s_interrupt_enable(uint32_t spi_periph, uint8_t interrupt) +{ + switch(interrupt){ + /* SPI/I2S transmit buffer empty interrupt */ + case SPI_I2S_INT_TBE: + SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_TBEIE; + break; + /* SPI/I2S receive buffer not empty interrupt */ + case SPI_I2S_INT_RBNE: + SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_RBNEIE; + break; + /* SPI/I2S error */ + case SPI_I2S_INT_ERR: + SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_ERRIE; + break; + default: + break; + } +} + +/*! + \brief disable SPI and I2S interrupt + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] interrupt: SPI/I2S interrupt + only one parameter can be selected which is shown as below: + \arg SPI_I2S_INT_TBE: transmit buffer empty interrupt + \arg SPI_I2S_INT_RBNE: receive buffer not empty interrupt + \arg SPI_I2S_INT_ERR: CRC error,configuration error,reception overrun error, + transmission underrun error and format error interrupt + \param[out] none + \retval none +*/ +void spi_i2s_interrupt_disable(uint32_t spi_periph, uint8_t interrupt) +{ + switch(interrupt){ + /* SPI/I2S transmit buffer empty interrupt */ + case SPI_I2S_INT_TBE: + SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_TBEIE); + break; + /* SPI/I2S receive buffer not empty interrupt */ + case SPI_I2S_INT_RBNE: + SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_RBNEIE); + break; + /* SPI/I2S error */ + case SPI_I2S_INT_ERR: + SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_ERRIE); + break; + default : + break; + } +} + +/*! + \brief get SPI and I2S interrupt flag status + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] interrupt: SPI/I2S interrupt flag status + only one parameter can be selected which is shown as below: + \arg SPI_I2S_INT_FLAG_TBE: transmit buffer empty interrupt flag + \arg SPI_I2S_INT_FLAG_RBNE: receive buffer not empty interrupt flag + \arg SPI_I2S_INT_FLAG_RXORERR: overrun interrupt flag + \arg SPI_INT_FLAG_CONFERR: config error interrupt flag + \arg SPI_INT_FLAG_CRCERR: CRC error interrupt flag + \arg I2S_INT_FLAG_TXURERR: underrun error interrupt flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus spi_i2s_interrupt_flag_get(uint32_t spi_periph, uint8_t interrupt) +{ + uint32_t reg1 = SPI_STAT(spi_periph); + uint32_t reg2 = SPI_CTL1(spi_periph); + + switch(interrupt){ + /* SPI/I2S transmit buffer empty interrupt */ + case SPI_I2S_INT_FLAG_TBE: + reg1 = reg1 & SPI_STAT_TBE; + reg2 = reg2 & SPI_CTL1_TBEIE; + break; + /* SPI/I2S receive buffer not empty interrupt */ + case SPI_I2S_INT_FLAG_RBNE: + reg1 = reg1 & SPI_STAT_RBNE; + reg2 = reg2 & SPI_CTL1_RBNEIE; + break; + /* SPI/I2S overrun interrupt */ + case SPI_I2S_INT_FLAG_RXORERR: + reg1 = reg1 & SPI_STAT_RXORERR; + reg2 = reg2 & SPI_CTL1_ERRIE; + break; + /* SPI config error interrupt */ + case SPI_INT_FLAG_CONFERR: + reg1 = reg1 & SPI_STAT_CONFERR; + reg2 = reg2 & SPI_CTL1_ERRIE; + break; + /* SPI CRC error interrupt */ + case SPI_INT_FLAG_CRCERR: + reg1 = reg1 & SPI_STAT_CRCERR; + reg2 = reg2 & SPI_CTL1_ERRIE; + break; + /* I2S underrun error interrupt */ + case I2S_INT_FLAG_TXURERR: + reg1 = reg1 & SPI_STAT_TXURERR; + reg2 = reg2 & SPI_CTL1_ERRIE; + break; + default : + break; + } + /*get SPI/I2S interrupt flag status */ + if((0U != reg1) && (0U != reg2)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief get SPI and I2S flag status + \param[in] spi_periph: SPIx(x=0,1,2) + \param[in] flag: SPI/I2S flag status + one or more parameters can be selected which are shown as below: + \arg SPI_FLAG_TBE: transmit buffer empty flag + \arg SPI_FLAG_RBNE: receive buffer not empty flag + \arg SPI_FLAG_TRANS: transmit on-going flag + \arg SPI_FLAG_RXORERR: receive overrun error flag + \arg SPI_FLAG_CONFERR: mode config error flag + \arg SPI_FLAG_CRCERR: CRC error flag + \arg I2S_FLAG_RXORERR: overrun error flag + \arg I2S_FLAG_TXURERR: underrun error flag + \arg I2S_FLAG_CH: channel side flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus spi_i2s_flag_get(uint32_t spi_periph, uint32_t flag) +{ + if(RESET != (SPI_STAT(spi_periph) & flag)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear SPI CRC error flag status + \param[in] spi_periph: SPIx(x=0,1,2) + \param[out] none + \retval none +*/ +void spi_crc_error_clear(uint32_t spi_periph) +{ + SPI_STAT(spi_periph) &= (uint32_t)(~SPI_FLAG_CRCERR); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_timer.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_timer.c new file mode 100644 index 0000000000000000000000000000000000000000..236eedf9be242f90485aa4152a01bebcd6b9cf11 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_timer.c @@ -0,0 +1,2004 @@ +/*! + \file gd32f10x_timer.c + \brief TIMER driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_timer.h" + +/* TIMER init parameter mask */ +#define ALIGNEDMODE_MASK ((uint32_t)0x00000060U) /*!< TIMER init parameter aligne dmode mask */ +#define COUNTERDIRECTION_MASK ((uint32_t)0x00000010U) /*!< TIMER init parameter counter direction mask */ +#define CLOCKDIVISION_MASK ((uint32_t)0x00000300U) /*!< TIMER init parameter clock division value mask */ + +/*! + \brief deinit a TIMER + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval none +*/ +void timer_deinit(uint32_t timer_periph) +{ + switch(timer_periph){ + case TIMER0: + /* reset TIMER0 */ + rcu_periph_reset_enable(RCU_TIMER0RST); + rcu_periph_reset_disable(RCU_TIMER0RST); + break; + case TIMER1: + /* reset TIMER1 */ + rcu_periph_reset_enable(RCU_TIMER1RST); + rcu_periph_reset_disable(RCU_TIMER1RST); + break; + case TIMER2: + /* reset TIMER2 */ + rcu_periph_reset_enable(RCU_TIMER2RST); + rcu_periph_reset_disable(RCU_TIMER2RST); + break; + case TIMER3: + /* reset TIMER3 */ + rcu_periph_reset_enable(RCU_TIMER3RST); + rcu_periph_reset_disable(RCU_TIMER3RST); + break; + case TIMER4: + /* reset TIMER4 */ + rcu_periph_reset_enable(RCU_TIMER4RST); + rcu_periph_reset_disable(RCU_TIMER4RST); + break; + case TIMER5: + /* reset TIMER5 */ + rcu_periph_reset_enable(RCU_TIMER5RST); + rcu_periph_reset_disable(RCU_TIMER5RST); + break; + case TIMER6: + /* reset TIMER6 */ + rcu_periph_reset_enable(RCU_TIMER6RST); + rcu_periph_reset_disable(RCU_TIMER6RST); + break; + case TIMER7: + /* reset TIMER7 */ + rcu_periph_reset_enable(RCU_TIMER7RST); + rcu_periph_reset_disable(RCU_TIMER7RST); + break; +#ifdef GD32F10X_XD + case TIMER8: + /* reset TIMER8 */ + rcu_periph_reset_enable(RCU_TIMER8RST); + rcu_periph_reset_disable(RCU_TIMER8RST); + break; + case TIMER9: + /* reset TIMER9 */ + rcu_periph_reset_enable(RCU_TIMER9RST); + rcu_periph_reset_disable(RCU_TIMER9RST); + break; + case TIMER10: + /* reset TIMER10 */ + rcu_periph_reset_enable(RCU_TIMER10RST); + rcu_periph_reset_disable(RCU_TIMER10RST); + break; + case TIMER11: + /* reset TIMER11 */ + rcu_periph_reset_enable(RCU_TIMER11RST); + rcu_periph_reset_disable(RCU_TIMER11RST); + break; + case TIMER12: + /* reset TIMER12 */ + rcu_periph_reset_enable(RCU_TIMER12RST); + rcu_periph_reset_disable(RCU_TIMER12RST); + break; + case TIMER13: + /* reset TIMER13 */ + rcu_periph_reset_enable(RCU_TIMER13RST); + rcu_periph_reset_disable(RCU_TIMER13RST); + break; +#endif /* GD32F10X_XD */ + default: + break; + } +} + +/*! + \brief initialize TIMER init parameter struct with a default value + \param[in] initpara: init parameter struct + \param[out] none + \retval none +*/ +void timer_struct_para_init(timer_parameter_struct* initpara) +{ + /* initialize the init parameter struct member with the default value */ + initpara->prescaler = 0U; + initpara->alignedmode = TIMER_COUNTER_EDGE; + initpara->counterdirection = TIMER_COUNTER_UP; + initpara->period = 65535U; + initpara->clockdivision = TIMER_CKDIV_DIV1; + initpara->repetitioncounter = 0U; +} + +/*! + \brief initialize TIMER counter + \param[in] timer_periph: TIMERx(x=0..13) + \param[in] initpara: init parameter struct + prescaler: prescaler value of the counter clock,0~65535 + alignedmode: TIMER_COUNTER_EDGE,TIMER_COUNTER_CENTER_DOWN,TIMER_COUNTER_CENTER_UP, + TIMER_COUNTER_CENTER_BOTH + counterdirection: TIMER_COUNTER_UP,TIMER_COUNTER_DOWN + period: counter auto reload value,0~65535 + clockdivision: TIMER_CKDIV_DIV1,TIMER_CKDIV_DIV2,TIMER_CKDIV_DIV4 + repetitioncounter: counter repetition value,0~255 + \param[out] none + \retval none +*/ +void timer_init(uint32_t timer_periph, timer_parameter_struct* initpara) +{ + /* configure the counter prescaler value */ + TIMER_PSC(timer_periph) = (uint16_t)initpara->prescaler; + + /* configure the counter direction and aligned mode */ + if((TIMER0 == timer_periph) || (TIMER1 == timer_periph) || (TIMER2 == timer_periph) || (TIMER3 == timer_periph) || + (TIMER4 == timer_periph) || (TIMER7 == timer_periph) || (TIMER8 == timer_periph) || (TIMER9 == timer_periph) || + (TIMER10 == timer_periph) || (TIMER11 == timer_periph) || (TIMER12 == timer_periph) || (TIMER13 == timer_periph)){ + TIMER_CTL0(timer_periph) &= (~(uint32_t)(TIMER_CTL0_DIR | TIMER_CTL0_CAM)); + TIMER_CTL0(timer_periph) |= (uint32_t)(initpara->alignedmode & ALIGNEDMODE_MASK); + TIMER_CTL0(timer_periph) |= (uint32_t)(initpara->counterdirection & COUNTERDIRECTION_MASK); + } + + /* configure the autoreload value */ + TIMER_CAR(timer_periph) = (uint32_t)initpara->period; + + if((TIMER5 != timer_periph) && (TIMER6 != timer_periph)){ + /* reset the CKDIV bit */ + TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_CKDIV); + TIMER_CTL0(timer_periph) |= (uint32_t)(initpara->clockdivision & CLOCKDIVISION_MASK); + } + + if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)){ + /* configure the repetition counter value */ + TIMER_CREP(timer_periph) = (uint32_t)initpara->repetitioncounter; + } + + /* generate an update event */ + TIMER_SWEVG(timer_periph) |= (uint32_t)TIMER_SWEVG_UPG; +} + +/*! + \brief enable a TIMER + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval none +*/ +void timer_enable(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_CEN; +} + +/*! + \brief disable a TIMER + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval none +*/ +void timer_disable(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) &= ~(uint32_t)TIMER_CTL0_CEN; +} + +/*! + \brief enable the auto reload shadow function + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval none +*/ +void timer_auto_reload_shadow_enable(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_ARSE; +} + +/*! + \brief disable the auto reload shadow function + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval none +*/ +void timer_auto_reload_shadow_disable(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) &= ~(uint32_t)TIMER_CTL0_ARSE; +} + +/*! + \brief enable the update event + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval none +*/ +void timer_update_event_enable(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) &= ~(uint32_t)TIMER_CTL0_UPDIS; +} + +/*! + \brief disable the update event + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval none +*/ +void timer_update_event_disable(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) |= (uint32_t) TIMER_CTL0_UPDIS; +} + +/*! + \brief set TIMER counter alignment mode + \param[in] timer_periph: TIMERx(x=0..4,7..13) + \param[in] aligned: + only one parameter can be selected which is shown as below: + \arg TIMER_COUNTER_EDGE: edge-aligned mode + \arg TIMER_COUNTER_CENTER_DOWN: center-aligned and counting down assert mode + \arg TIMER_COUNTER_CENTER_UP: center-aligned and counting up assert mode + \arg TIMER_COUNTER_CENTER_BOTH: center-aligned and counting up/down assert mode + \param[out] none + \retval none +*/ +void timer_counter_alignment(uint32_t timer_periph, uint16_t aligned) +{ + TIMER_CTL0(timer_periph) &= ~(uint32_t)TIMER_CTL0_CAM; + TIMER_CTL0(timer_periph) |= (uint32_t)aligned; +} + +/*! + \brief set TIMER counter up direction + \param[in] timer_periph: TIMERx(x=0..4,7..13) + \param[out] none + \retval none +*/ +void timer_counter_up_direction(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) &= ~(uint32_t)TIMER_CTL0_DIR; +} + +/*! + \brief set TIMER counter down direction + \param[in] timer_periph: TIMERx(x=0..4,7..13) + \param[out] none + \retval none +*/ +void timer_counter_down_direction(uint32_t timer_periph) +{ + TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_DIR; +} + +/*! + \brief configure TIMER prescaler + \param[in] timer_periph: TIMERx(x=0..13) + \param[in] prescaler: prescaler value + \param[in] pscreload: prescaler reload mode + only one parameter can be selected which is shown as below: + \arg TIMER_PSC_RELOAD_NOW: the prescaler is loaded right now + \arg TIMER_PSC_RELOAD_UPDATE: the prescaler is loaded at the next update event + \param[out] none + \retval none +*/ +void timer_prescaler_config(uint32_t timer_periph, uint16_t prescaler, uint32_t pscreload) +{ + TIMER_PSC(timer_periph) = (uint32_t)prescaler; + + if(TIMER_PSC_RELOAD_NOW == pscreload){ + TIMER_SWEVG(timer_periph) |= (uint32_t)TIMER_SWEVG_UPG; + } +} + +/*! + \brief configure TIMER repetition register value + \param[in] timer_periph: TIMERx(x=0,7) + \param[in] repetition: the counter repetition value,0~255 + \param[out] none + \retval none +*/ +void timer_repetition_value_config(uint32_t timer_periph, uint16_t repetition) +{ + TIMER_CREP(timer_periph) = (uint32_t)repetition; +} + +/*! + \brief configure TIMER autoreload register value + \param[in] timer_periph: TIMERx(x=0..13) + \param[in] autoreload: the counter auto-reload value + \param[out] none + \retval none +*/ +void timer_autoreload_value_config(uint32_t timer_periph, uint32_t autoreload) +{ + TIMER_CAR(timer_periph) = (uint32_t)autoreload; +} + +/*! + \brief configure TIMER counter register value + \param[in] timer_periph: TIMERx(x=0..13) + \param[in] counter: the counter value + \param[out] none + \retval none +*/ +void timer_counter_value_config(uint32_t timer_periph, uint32_t counter) +{ + TIMER_CNT(timer_periph) = (uint32_t)counter; +} + +/*! + \brief read TIMER counter value + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval counter value +*/ +uint32_t timer_counter_read(uint32_t timer_periph) +{ + uint32_t count_value = 0U; + count_value = TIMER_CNT(timer_periph); + return (count_value); +} + +/*! + \brief read TIMER prescaler value + \param[in] timer_periph: TIMERx(x=0..13) + \param[out] none + \retval prescaler register value +*/ +uint16_t timer_prescaler_read(uint32_t timer_periph) +{ + uint16_t prescaler_value = 0U; + prescaler_value = (uint16_t)(TIMER_PSC(timer_periph)); + return (prescaler_value); +} + +/*! + \brief configure TIMER single pulse mode + \param[in] timer_periph: TIMERx(x=0..8,11) + \param[in] spmode: + only one parameter can be selected which is shown as below: + \arg TIMER_SP_MODE_SINGLE: single pulse mode + \arg TIMER_SP_MODE_REPETITIVE: repetitive pulse mode + \param[out] none + \retval none +*/ +void timer_single_pulse_mode_config(uint32_t timer_periph, uint32_t spmode) +{ + if(TIMER_SP_MODE_SINGLE == spmode){ + TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_SPM; + }else if(TIMER_SP_MODE_REPETITIVE == spmode){ + TIMER_CTL0(timer_periph) &= ~((uint32_t)TIMER_CTL0_SPM); + }else{ + /* illegal parameters */ + } +} + +/*! + \brief configure TIMER update source + \param[in] timer_periph: TIMERx(x=0..13) + \param[in] update: + only one parameter can be selected which is shown as below: + \arg TIMER_UPDATE_SRC_GLOBAL: update generate by setting of UPG bit or the counter overflow/underflow, + or the slave mode controller trigger + \arg TIMER_UPDATE_SRC_REGULAR: update generate only by counter overflow/underflow + \param[out] none + \retval none +*/ +void timer_update_source_config(uint32_t timer_periph, uint32_t update) +{ + if(TIMER_UPDATE_SRC_REGULAR == update){ + TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_UPS; + }else if(TIMER_UPDATE_SRC_GLOBAL == update){ + TIMER_CTL0(timer_periph) &= ~(uint32_t)TIMER_CTL0_UPS; + }else{ + /* illegal parameters */ + } +} + +/*! + \brief enable the TIMER DMA + \param[in] timer_periph: please refer to the following parameters + \param[in] dma: timer DMA source enable + only one parameter can be selected which is shown as below: + \arg TIMER_DMA_UPD: update DMA enable,TIMERx(x=0..7) + \arg TIMER_DMA_CH0D: channel 0 DMA enable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CH1D: channel 1 DMA enable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CH2D: channel 2 DMA enable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CH3D: channel 3 DMA enable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CMTD: commutation DMA request enable,TIMERx(x=0,7) + \arg TIMER_DMA_TRGD: trigger DMA enable,TIMERx(x=0..4,7) + \param[out] none + \retval none +*/ +void timer_dma_enable(uint32_t timer_periph, uint16_t dma) +{ + TIMER_DMAINTEN(timer_periph) |= (uint32_t) dma; +} + +/*! + \brief disable the TIMER DMA + \param[in] timer_periph: please refer to the following parameters + \param[in] dma: timer DMA source disable + only one parameter can be selected which is shown as below: + \arg TIMER_DMA_UPD: update DMA disable,TIMERx(x=0..7) + \arg TIMER_DMA_CH0D: channel 0 DMA disable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CH1D: channel 1 DMA disable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CH2D: channel 2 DMA disable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CH3D: channel 3 DMA disable,TIMERx(x=0..4,7) + \arg TIMER_DMA_CMTD: commutation DMA request disable,TIMERx(x=0,7) + \arg TIMER_DMA_TRGD: trigger DMA disable,TIMERx(x=0..4,7) + \param[out] none + \retval none +*/ +void timer_dma_disable(uint32_t timer_periph, uint16_t dma) +{ + TIMER_DMAINTEN(timer_periph) &= (~(uint32_t)(dma)); +} + +/*! + \brief channel DMA request source selection + \param[in] timer_periph: TIMERx(x=0..4,7) + \param[in] dma_request: channel DMA request source selection + only one parameter can be selected which is shown as below: + \arg TIMER_DMAREQUEST_CHANNELEVENT: DMA request of channel y is sent when channel y event occurs + \arg TIMER_DMAREQUEST_UPDATEEVENT: DMA request of channel y is sent when update event occurs + \param[out] none + \retval none +*/ +void timer_channel_dma_request_source_select(uint32_t timer_periph, uint32_t dma_request) +{ + if(TIMER_DMAREQUEST_UPDATEEVENT == dma_request){ + TIMER_CTL1(timer_periph) |= (uint32_t)TIMER_CTL1_DMAS; + }else if(TIMER_DMAREQUEST_CHANNELEVENT == dma_request){ + TIMER_CTL1(timer_periph) &= ~(uint32_t)TIMER_CTL1_DMAS; + }else{ + /* illegal parameters */ + } +} + +/*! + \brief configure the TIMER DMA transfer + \param[in] timer_periph: please refer to the following parameters + \param[in] dma_baseaddr: + only one parameter can be selected which is shown as below: + \arg TIMER_DMACFG_DMATA_CTL0: DMA transfer address is TIMER_CTL0,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CTL1: DMA transfer address is TIMER_CTL1,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_SMCFG: DMA transfer address is TIMER_SMCFG,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_DMAINTEN: DMA transfer address is TIMER_DMAINTEN,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_INTF: DMA transfer address is TIMER_INTF,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_SWEVG: DMA transfer address is TIMER_SWEVG,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CHCTL0: DMA transfer address is TIMER_CHCTL0,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CHCTL1: DMA transfer address is TIMER_CHCTL1,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CHCTL2: DMA transfer address is TIMER_CHCTL2,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CNT: DMA transfer address is TIMER_CNT,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_PSC: DMA transfer address is TIMER_PSC,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CAR: DMA transfer address is TIMER_CAR,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CREP: DMA transfer address is TIMER_CREP,TIMERx(x=0,7) + \arg TIMER_DMACFG_DMATA_CH0CV: DMA transfer address is TIMER_CH0CV,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CH1CV: DMA transfer address is TIMER_CH1CV,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CH2CV: DMA transfer address is TIMER_CH2CV,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CH3CV: DMA transfer address is TIMER_CH3CV,TIMERx(x=0..4,7) + \arg TIMER_DMACFG_DMATA_CCHP: DMA transfer address is TIMER_CCHP,TIMERx(x=0,7) + \arg TIMER_DMACFG_DMATA_DMACFG: DMA transfer address is TIMER_DMACFG,TIMERx(x=0..4,7) + \param[in] dma_lenth: + only one parameter can be selected which is shown as below: + \arg TIMER_DMACFG_DMATC_xTRANSFER(x=1..18): DMA transfer x time + \param[out] none + \retval none +*/ +void timer_dma_transfer_config(uint32_t timer_periph, uint32_t dma_baseaddr, uint32_t dma_lenth) +{ + TIMER_DMACFG(timer_periph) &= (~(uint32_t)(TIMER_DMACFG_DMATA | TIMER_DMACFG_DMATC)); + TIMER_DMACFG(timer_periph) |= (uint32_t)(dma_baseaddr | dma_lenth); +} + +/*! + \brief software generate events + \param[in] timer_periph: please refer to the following parameters + \param[in] event: the timer software event generation sources + one or more parameters can be selected which are shown as below: + \arg TIMER_EVENT_SRC_UPG: update event generation, TIMERx(x=0..13) + \arg TIMER_EVENT_SRC_CH0G: channel 0 capture or compare event generation, TIMERx(x=0..4,7..13) + \arg TIMER_EVENT_SRC_CH1G: channel 1 capture or compare event generation, TIMERx(x=0..4,7,8,11) + \arg TIMER_EVENT_SRC_CH2G: channel 2 capture or compare event generation, TIMERx(x=0..4,7) + \arg TIMER_EVENT_SRC_CH3G: channel 3 capture or compare event generation, TIMERx(x=0..4,7) + \arg TIMER_EVENT_SRC_CMTG: channel commutation event generation, TIMERx(x=0,7) + \arg TIMER_EVENT_SRC_TRGG: trigger event generation, TIMERx(x=0..4,7,8,11) + \arg TIMER_EVENT_SRC_BRKG: break event generation, TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_event_software_generate(uint32_t timer_periph, uint16_t event) +{ + TIMER_SWEVG(timer_periph) |= (uint32_t)event; +} + +/*! + \brief initialize TIMER break parameter struct with a default value + \param[in] breakpara: TIMER break parameter struct + \param[out] none + \retval none +*/ +void timer_break_struct_para_init(timer_break_parameter_struct* breakpara) +{ + /* initialize the break parameter struct member with the default value */ + breakpara->runoffstate = TIMER_ROS_STATE_DISABLE; + breakpara->ideloffstate = TIMER_IOS_STATE_DISABLE; + breakpara->deadtime = 0U; + breakpara->breakpolarity = TIMER_BREAK_POLARITY_LOW; + breakpara->outputautostate = TIMER_OUTAUTO_DISABLE; + breakpara->protectmode = TIMER_CCHP_PROT_OFF; + breakpara->breakstate = TIMER_BREAK_DISABLE; +} + +/*! + \brief configure TIMER break function + \param[in] timer_periph: TIMERx(x=0,7) + \param[in] breakpara: TIMER break parameter struct + runoffstate: TIMER_ROS_STATE_ENABLE,TIMER_ROS_STATE_DISABLE + ideloffstate: TIMER_IOS_STATE_ENABLE,TIMER_IOS_STATE_DISABLE + deadtime: 0~255 + breakpolarity: TIMER_BREAK_POLARITY_LOW,TIMER_BREAK_POLARITY_HIGH + outputautostate: TIMER_OUTAUTO_ENABLE,TIMER_OUTAUTO_DISABLE + protectmode: TIMER_CCHP_PROT_OFF,TIMER_CCHP_PROT_0,TIMER_CCHP_PROT_1,TIMER_CCHP_PROT_2 + breakstate: TIMER_BREAK_ENABLE,TIMER_BREAK_DISABLE + \param[out] none + \retval none +*/ +void timer_break_config(uint32_t timer_periph, timer_break_parameter_struct* breakpara) +{ + TIMER_CCHP(timer_periph) = (uint32_t)(((uint32_t)(breakpara->runoffstate)) | + ((uint32_t)(breakpara->ideloffstate)) | + ((uint32_t)(breakpara->deadtime)) | + ((uint32_t)(breakpara->breakpolarity)) | + ((uint32_t)(breakpara->outputautostate)) | + ((uint32_t)(breakpara->protectmode)) | + ((uint32_t)(breakpara->breakstate))) ; +} + +/*! + \brief enable TIMER break function + \param[in] timer_periph: TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_break_enable(uint32_t timer_periph) +{ + TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_BRKEN; +} + +/*! + \brief disable TIMER break function + \param[in] timer_periph: TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_break_disable(uint32_t timer_periph) +{ + TIMER_CCHP(timer_periph) &= ~(uint32_t)TIMER_CCHP_BRKEN; +} + +/*! + \brief enable TIMER output automatic function + \param[in] timer_periph: TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_automatic_output_enable(uint32_t timer_periph) +{ + TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_OAEN; +} + +/*! + \brief disable TIMER output automatic function + \param[in] timer_periph: TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_automatic_output_disable(uint32_t timer_periph) +{ + TIMER_CCHP(timer_periph) &= ~(uint32_t)TIMER_CCHP_OAEN; +} + +/*! + \brief enable or disable TIMER primary output function + \param[in] timer_periph: TIMERx(x=0,7) + \param[in] newvalue: ENABLE or DISABLE + \param[out] none + \retval none +*/ +void timer_primary_output_config(uint32_t timer_periph, ControlStatus newvalue) +{ + if(ENABLE == newvalue){ + TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_POEN; + }else{ + TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_POEN); + } +} + +/*! + \brief enable or disable channel capture/compare control shadow register + \param[in] timer_periph: TIMERx(x=0,7) + \param[in] newvalue: ENABLE or DISABLE + \param[out] none + \retval none +*/ +void timer_channel_control_shadow_config(uint32_t timer_periph, ControlStatus newvalue) +{ + if(ENABLE == newvalue){ + TIMER_CTL1(timer_periph) |= (uint32_t)TIMER_CTL1_CCSE; + }else{ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_CCSE); + } +} + +/*! + \brief configure TIMER channel control shadow register update control + \param[in] timer_periph: TIMERx(x=0,7) + \param[in] ccuctl: channel control shadow register update control + only one parameter can be selected which is shown as below: + \arg TIMER_UPDATECTL_CCU: the shadow registers update by when CMTG bit is set + \arg TIMER_UPDATECTL_CCUTRI: the shadow registers update by when CMTG bit is set or an rising edge of TRGI occurs + \param[out] none + \retval none +*/ +void timer_channel_control_shadow_update_config(uint32_t timer_periph, uint32_t ccuctl) +{ + if(TIMER_UPDATECTL_CCU == ccuctl){ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_CCUC); + }else if(TIMER_UPDATECTL_CCUTRI == ccuctl){ + TIMER_CTL1(timer_periph) |= (uint32_t)TIMER_CTL1_CCUC; + }else{ + /* illegal parameters */ + } +} + +/*! + \brief initialize TIMER channel output parameter struct with a default value + \param[in] ocpara: TIMER channel n output parameter struct + \param[out] none + \retval none +*/ +void timer_channel_output_struct_para_init(timer_oc_parameter_struct* ocpara) +{ + /* initialize the channel output parameter struct member with the default value */ + ocpara->outputstate = TIMER_CCX_DISABLE; + ocpara->outputnstate = TIMER_CCXN_DISABLE; + ocpara->ocpolarity = TIMER_OC_POLARITY_HIGH; + ocpara->ocnpolarity = TIMER_OCN_POLARITY_HIGH; + ocpara->ocidlestate = TIMER_OC_IDLE_STATE_LOW; + ocpara->ocnidlestate = TIMER_OCN_IDLE_STATE_LOW; +} + +/*! + \brief configure TIMER channel output function + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0..4,7)) + \param[in] ocpara: TIMER channeln output parameter struct + outputstate: TIMER_CCX_ENABLE,TIMER_CCX_DISABLE + outputnstate: TIMER_CCXN_ENABLE,TIMER_CCXN_DISABLE + ocpolarity: TIMER_OC_POLARITY_HIGH,TIMER_OC_POLARITY_LOW + ocnpolarity: TIMER_OCN_POLARITY_HIGH,TIMER_OCN_POLARITY_LOW + ocidlestate: TIMER_OC_IDLE_STATE_LOW,TIMER_OC_IDLE_STATE_HIGH + ocnidlestate: TIMER_OCN_IDLE_STATE_LOW,TIMER_OCN_IDLE_STATE_HIGH + \param[out] none + \retval none +*/ +void timer_channel_output_config(uint32_t timer_periph, uint16_t channel, timer_oc_parameter_struct* ocpara) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + /* reset the CH0EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN); + TIMER_CHCTL0(timer_periph) &= ~(uint32_t)TIMER_CHCTL0_CH0MS; + /* set the CH0EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->outputstate; + /* reset the CH0P bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0P); + /* set the CH0P bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->ocpolarity; + + if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)){ + /* reset the CH0NEN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0NEN); + /* set the CH0NEN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->outputnstate; + /* reset the CH0NP bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0NP); + /* set the CH0NP bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->ocnpolarity; + /* reset the ISO0 bit */ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO0); + /* set the ISO0 bit */ + TIMER_CTL1(timer_periph) |= (uint32_t)ocpara->ocidlestate; + /* reset the ISO0N bit */ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO0N); + /* set the ISO0N bit */ + TIMER_CTL1(timer_periph) |= (uint32_t)ocpara->ocnidlestate; + } + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + /* reset the CH1EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN); + TIMER_CHCTL0(timer_periph) &= ~(uint32_t)TIMER_CHCTL0_CH1MS; + /* set the CH1EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->outputstate) << 4U); + /* reset the CH1P bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1P); + /* set the CH1P bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocpolarity)<< 4U); + + if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)){ + /* reset the CH1NEN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1NEN); + /* set the CH1NEN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->outputnstate)<< 4U); + /* reset the CH1NP bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1NP); + /* set the CH1NP bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocnpolarity)<< 4U); + /* reset the ISO1 bit */ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO1); + /* set the ISO1 bit */ + TIMER_CTL1(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocidlestate)<< 2U); + /* reset the ISO1N bit */ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO1N); + /* set the ISO1N bit */ + TIMER_CTL1(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocnidlestate)<< 2U); + } + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + /* reset the CH2EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2EN); + TIMER_CHCTL1(timer_periph) &= ~(uint32_t)TIMER_CHCTL1_CH2MS; + /* set the CH2EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->outputstate) << 8U); + /* reset the CH2P bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2P); + /* set the CH2P bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocpolarity)<< 8U); + + if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)){ + /* reset the CH2NEN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2NEN); + /* set the CH2NEN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->outputnstate)<< 8U); + /* reset the CH2NP bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2NP); + /* set the CH2NP bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocnpolarity)<< 8U); + /* reset the ISO2 bit */ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO2); + /* set the ISO2 bit */ + TIMER_CTL1(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocidlestate)<< 4U); + /* reset the ISO2N bit */ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO2N); + /* set the ISO2N bit */ + TIMER_CTL1(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocnidlestate)<< 4U); + } + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + /* reset the CH3EN bit */ + TIMER_CHCTL2(timer_periph) &=(~(uint32_t)TIMER_CHCTL2_CH3EN); + TIMER_CHCTL1(timer_periph) &= ~(uint32_t)TIMER_CHCTL1_CH3MS; + /* set the CH3EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->outputstate) << 12U); + /* reset the CH3P bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3P); + /* set the CH3P bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocpolarity)<< 12U); + + if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)){ + /* reset the ISO3 bit */ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO3); + /* set the ISO3 bit */ + TIMER_CTL1(timer_periph) |= (uint32_t)((uint32_t)(ocpara->ocidlestate)<< 6U); + } + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel output compare mode + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[in] ocmode: channel output compare mode + only one parameter can be selected which is shown as below: + \arg TIMER_OC_MODE_TIMING: timing mode + \arg TIMER_OC_MODE_ACTIVE: active mode + \arg TIMER_OC_MODE_INACTIVE: inactive mode + \arg TIMER_OC_MODE_TOGGLE: toggle mode + \arg TIMER_OC_MODE_LOW: force low mode + \arg TIMER_OC_MODE_HIGH: force high mode + \arg TIMER_OC_MODE_PWM0: PWM0 mode + \arg TIMER_OC_MODE_PWM1: PWM1 mode + \param[out] none + \retval none +*/ +void timer_channel_output_mode_config(uint32_t timer_periph, uint16_t channel, uint16_t ocmode) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMCTL); + TIMER_CHCTL0(timer_periph) |= (uint32_t)ocmode; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMCTL); + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(ocmode)<< 8U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMCTL); + TIMER_CHCTL1(timer_periph) |= (uint32_t)ocmode; + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMCTL); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)(ocmode)<< 8U); + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel output pulse value + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[in] pulse: channel output pulse value + \param[out] none + \retval none +*/ +void timer_channel_output_pulse_value_config(uint32_t timer_periph, uint16_t channel, uint32_t pulse) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CH0CV(timer_periph) = (uint32_t)pulse; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CH1CV(timer_periph) = (uint32_t)pulse; + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CH2CV(timer_periph) = (uint32_t)pulse; + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CH3CV(timer_periph) = (uint32_t)pulse; + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel output shadow function + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[in] ocshadow: channel output shadow state + only one parameter can be selected which is shown as below: + \arg TIMER_OC_SHADOW_ENABLE: channel output shadow state enable + \arg TIMER_OC_SHADOW_DISABLE: channel output shadow state disable + \param[out] none + \retval none +*/ +void timer_channel_output_shadow_config(uint32_t timer_periph, uint16_t channel, uint16_t ocshadow) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMSEN); + TIMER_CHCTL0(timer_periph) |= (uint32_t)ocshadow; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMSEN); + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(ocshadow) << 8U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMSEN); + TIMER_CHCTL1(timer_periph) |= (uint32_t)ocshadow; + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMSEN); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)(ocshadow) << 8U); + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel output fast function + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[in] ocfast: channel output fast function + only one parameter can be selected which is shown as below: + \arg TIMER_OC_FAST_ENABLE: channel output fast function enable + \arg TIMER_OC_FAST_DISABLE: channel output fast function disable + \param[out] none + \retval none +*/ +void timer_channel_output_fast_config(uint32_t timer_periph, uint16_t channel, uint16_t ocfast) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMFEN); + TIMER_CHCTL0(timer_periph) |= (uint32_t)ocfast; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMFEN); + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)ocfast << 8U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMFEN); + TIMER_CHCTL1(timer_periph) |= (uint32_t)ocfast; + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMFEN); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)ocfast << 8U); + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel output clear function + \param[in] timer_periph: TIMERx(x=0..4,7) + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0 + \arg TIMER_CH_1: TIMER channel1 + \arg TIMER_CH_2: TIMER channel2 + \arg TIMER_CH_3: TIMER channel3 + \param[in] occlear: channel output clear function + only one parameter can be selected which is shown as below: + \arg TIMER_OC_CLEAR_ENABLE: channel output clear function enable + \arg TIMER_OC_CLEAR_DISABLE: channel output clear function disable + \param[out] none + \retval none +*/ +void timer_channel_output_clear_config(uint32_t timer_periph, uint16_t channel, uint16_t occlear) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMCEN); + TIMER_CHCTL0(timer_periph) |= (uint32_t)occlear; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMCEN); + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)occlear << 8U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMCEN); + TIMER_CHCTL1(timer_periph) |= (uint32_t)occlear; + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMCEN); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)occlear << 8U); + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel output polarity + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[in] ocpolarity: channel output polarity + only one parameter can be selected which is shown as below: + \arg TIMER_OC_POLARITY_HIGH: channel output polarity is high + \arg TIMER_OC_POLARITY_LOW: channel output polarity is low + \param[out] none + \retval none +*/ +void timer_channel_output_polarity_config(uint32_t timer_periph, uint16_t channel, uint16_t ocpolarity) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0P); + TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpolarity; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1P); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocpolarity << 4U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2P); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocpolarity << 8U); + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3P); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocpolarity << 12U); + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel complementary output polarity + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \param[in] ocnpolarity: channel complementary output polarity + only one parameter can be selected which is shown as below: + \arg TIMER_OCN_POLARITY_HIGH: channel complementary output polarity is high + \arg TIMER_OCN_POLARITY_LOW: channel complementary output polarity is low + \param[out] none + \retval none +*/ +void timer_channel_complementary_output_polarity_config(uint32_t timer_periph, uint16_t channel, uint16_t ocnpolarity) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0NP); + TIMER_CHCTL2(timer_periph) |= (uint32_t)ocnpolarity; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1NP); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocnpolarity << 4U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2NP); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocnpolarity << 8U); + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel enable state + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[in] state: TIMER channel enable state + only one parameter can be selected which is shown as below: + \arg TIMER_CCX_ENABLE: channel enable + \arg TIMER_CCX_DISABLE: channel disable + \param[out] none + \retval none +*/ +void timer_channel_output_state_config(uint32_t timer_periph, uint16_t channel, uint32_t state) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN); + TIMER_CHCTL2(timer_periph) |= (uint32_t)state; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)state << 4U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2EN); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)state << 8U); + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3EN); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)state << 12U); + break; + default: + break; + } +} + +/*! + \brief configure TIMER channel complementary output enable state + \param[in] timer_periph: TIMERx(x=0,7) + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0 + \arg TIMER_CH_1: TIMER channel1 + \arg TIMER_CH_2: TIMER channel2 + \param[in] ocnstate: TIMER channel complementary output enable state + only one parameter can be selected which is shown as below: + \arg TIMER_CCXN_ENABLE: channel complementary enable + \arg TIMER_CCXN_DISABLE: channel complementary disable + \param[out] none + \retval none +*/ +void timer_channel_complementary_output_state_config(uint32_t timer_periph, uint16_t channel, uint16_t ocnstate) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0NEN); + TIMER_CHCTL2(timer_periph) |= (uint32_t)ocnstate; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1NEN); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocnstate << 4U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2NEN); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocnstate << 8U); + break; + default: + break; + } +} + +/*! + \brief initialize TIMER channel input parameter struct with a default value + \param[in] icpara: TIMER channel intput parameter struct + \param[out] none + \retval none +*/ +void timer_channel_input_struct_para_init(timer_ic_parameter_struct* icpara) +{ + /* initialize the channel input parameter struct member with the default value */ + icpara->icpolarity = TIMER_IC_POLARITY_RISING; + icpara->icselection = TIMER_IC_SELECTION_DIRECTTI; + icpara->icprescaler = TIMER_IC_PSC_DIV1; + icpara->icfilter = 0U; +} + +/*! + \brief configure TIMER input capture parameter + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0..4,7)) + \param[in] icpara: TIMER channel intput parameter struct + icpolarity: TIMER_IC_POLARITY_RISING, TIMER_IC_POLARITY_FALLING, + TIMER_IC_POLARITY_BOTH_EDGE(only for TIMER1~TIMER8) + icselection: TIMER_IC_SELECTION_DIRECTTI, TIMER_IC_SELECTION_INDIRECTTI, + TIMER_IC_SELECTION_ITS + icprescaler: TIMER_IC_PSC_DIV1, TIMER_IC_PSC_DIV2, TIMER_IC_PSC_DIV4, + TIMER_IC_PSC_DIV8 + icfilter: 0~15 + \param[out] none + \retval none +*/ +void timer_input_capture_config(uint32_t timer_periph, uint16_t channel, timer_ic_parameter_struct* icpara) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + /* reset the CH0EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN); + + /* reset the CH0P and CH0NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_CH0NP)); + TIMER_CHCTL2(timer_periph) |= (uint32_t)(icpara->icpolarity); + /* reset the CH0MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS); + TIMER_CHCTL0(timer_periph) |= (uint32_t)(icpara->icselection); + /* reset the CH0CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT); + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(icpara->icfilter) << 4U); + + /* set the CH0EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN; + break; + + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + /* reset the CH1EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN); + + /* reset the CH1P and CH1NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P | TIMER_CHCTL2_CH1NP)); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(icpara->icpolarity) << 4U); + /* reset the CH1MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS); + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(icpara->icselection) << 8U); + /* reset the CH1CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT); + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(icpara->icfilter) << 12U); + + /* set the CH1EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN; + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + /* reset the CH2EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2EN); + + /* reset the CH2P and CH2NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH2P | TIMER_CHCTL2_CH2NP)); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(icpara->icpolarity) << 8U); + + /* reset the CH2MS bit */ + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2MS); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)(icpara->icselection)); + + /* reset the CH2CAPFLT bit */ + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2CAPFLT); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)(icpara->icfilter) << 4U); + + /* set the CH2EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH2EN; + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + /* reset the CH3EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3EN); + + /* reset the CH3P bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH3P)); + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(icpara->icpolarity) << 12U); + + /* reset the CH3MS bit */ + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3MS); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)(icpara->icselection) << 8U); + + /* reset the CH3CAPFLT bit */ + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3CAPFLT); + TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)(icpara->icfilter) << 12U); + + /* set the CH3EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH3EN; + break; + default: + break; + } + /* configure TIMER channel input capture prescaler value */ + timer_channel_input_capture_prescaler_config(timer_periph,channel,(uint16_t)(icpara->icprescaler)); +} + +/*! + \brief configure TIMER channel input capture prescaler value + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[in] prescaler: channel input capture prescaler value + only one parameter can be selected which is shown as below: + \arg TIMER_IC_PSC_DIV1: no prescaler + \arg TIMER_IC_PSC_DIV2: divided by 2 + \arg TIMER_IC_PSC_DIV4: divided by 4 + \arg TIMER_IC_PSC_DIV8: divided by 8 + \param[out] none + \retval none +*/ +void timer_channel_input_capture_prescaler_config(uint32_t timer_periph, uint16_t channel, uint16_t prescaler) +{ + switch(channel){ + /* configure TIMER_CH_0 */ + case TIMER_CH_0: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPPSC); + TIMER_CHCTL0(timer_periph) |= (uint32_t)prescaler; + break; + /* configure TIMER_CH_1 */ + case TIMER_CH_1: + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPPSC); + TIMER_CHCTL0(timer_periph) |= ((uint32_t)prescaler << 8U); + break; + /* configure TIMER_CH_2 */ + case TIMER_CH_2: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2CAPPSC); + TIMER_CHCTL1(timer_periph) |= (uint32_t)prescaler; + break; + /* configure TIMER_CH_3 */ + case TIMER_CH_3: + TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3CAPPSC); + TIMER_CHCTL1(timer_periph) |= ((uint32_t)prescaler << 8U); + break; + default: + break; + } +} + +/*! + \brief read TIMER channel capture compare register value + \param[in] timer_periph: please refer to the following parameters + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0(TIMERx(x=0..4,7..13)) + \arg TIMER_CH_1: TIMER channel1(TIMERx(x=0..4,7,8,11)) + \arg TIMER_CH_2: TIMER channel2(TIMERx(x=0..4,7)) + \arg TIMER_CH_3: TIMER channel3(TIMERx(x=0..4,7)) + \param[out] none + \retval channel capture compare register value +*/ +uint32_t timer_channel_capture_value_register_read(uint32_t timer_periph, uint16_t channel) +{ + uint32_t count_value = 0U; + + switch(channel){ + case TIMER_CH_0: + /* read TIMER channel 0 capture compare register value */ + count_value = TIMER_CH0CV(timer_periph); + break; + case TIMER_CH_1: + /* read TIMER channel 1 capture compare register value */ + count_value = TIMER_CH1CV(timer_periph); + break; + case TIMER_CH_2: + /* read TIMER channel 2 capture compare register value */ + count_value = TIMER_CH2CV(timer_periph); + break; + case TIMER_CH_3: + /* read TIMER channel 3 capture compare register value */ + count_value = TIMER_CH3CV(timer_periph); + break; + default: + break; + } + return (count_value); +} + +/*! + \brief configure TIMER input pwm capture function + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[in] channel: + only one parameter can be selected which is shown as below: + \arg TIMER_CH_0: TIMER channel0 + \arg TIMER_CH_1: TIMER channel1 + \param[in] icpwm:TIMER channel intput pwm parameter struct + icpolarity: TIMER_IC_POLARITY_RISING,TIMER_IC_POLARITY_FALLING + icselection: TIMER_IC_SELECTION_DIRECTTI,TIMER_IC_SELECTION_INDIRECTTI + icprescaler: TIMER_IC_PSC_DIV1,TIMER_IC_PSC_DIV2,TIMER_IC_PSC_DIV4,TIMER_IC_PSC_DIV8 + icfilter: 0~15 + \param[out] none + \retval none +*/ +void timer_input_pwm_capture_config(uint32_t timer_periph, uint16_t channel, timer_ic_parameter_struct* icpwm) +{ + uint16_t icpolarity = 0x0U; + uint16_t icselection = 0x0U; + + /* Set channel input polarity */ + if(TIMER_IC_POLARITY_RISING == icpwm->icpolarity){ + icpolarity = TIMER_IC_POLARITY_FALLING; + }else{ + icpolarity = TIMER_IC_POLARITY_RISING; + } + /* Set channel input mode selection */ + if(TIMER_IC_SELECTION_DIRECTTI == icpwm->icselection){ + icselection = TIMER_IC_SELECTION_INDIRECTTI; + }else{ + icselection = TIMER_IC_SELECTION_DIRECTTI; + } + + if(TIMER_CH_0 == channel){ + /* reset the CH0EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN); + /* reset the CH0P and CH0NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_CH0NP)); + /* set the CH0P and CH0NP bits */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)(icpwm->icpolarity); + /* reset the CH0MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS); + /* set the CH0MS bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)(icpwm->icselection); + /* reset the CH0CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT); + /* set the CH0CAPFLT bit */ + TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpwm->icfilter) << 4U); + /* set the CH0EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN; + /* configure TIMER channel input capture prescaler value */ + timer_channel_input_capture_prescaler_config(timer_periph,TIMER_CH_0,(uint16_t)(icpwm->icprescaler)); + + /* reset the CH1EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN); + /* reset the CH1P and CH1NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P|TIMER_CHCTL2_CH1NP)); + /* set the CH1P and CH1NP bits */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)icpolarity<< 4U); + /* reset the CH1MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS); + /* set the CH1MS bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)icselection<< 8U); + /* reset the CH1CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT); + /* set the CH1CAPFLT bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(icpwm->icfilter)<< 12U); + /* set the CH1EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN; + /* configure TIMER channel input capture prescaler value */ + timer_channel_input_capture_prescaler_config(timer_periph,TIMER_CH_1,(uint16_t)(icpwm->icprescaler)); + }else{ + /* reset the CH1EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN); + /* reset the CH1P and CH1NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P|TIMER_CHCTL2_CH1NP)); + /* set the CH1P and CH1NP bits */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(icpwm->icpolarity)<< 4U); + /* reset the CH1MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS); + /* set the CH1MS bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(icpwm->icselection)<< 8U); + /* reset the CH1CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT); + /* set the CH1CAPFLT bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)(icpwm->icfilter)<< 12U); + /* set the CH1EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN; + /* configure TIMER channel input capture prescaler value */ + timer_channel_input_capture_prescaler_config(timer_periph,TIMER_CH_1,(uint16_t)(icpwm->icprescaler)); + + /* reset the CH0EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN); + /* reset the CH0P and CH0NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P|TIMER_CHCTL2_CH0NP)); + /* set the CH0P and CH0NP bits */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)icpolarity; + /* reset the CH0MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS); + /* set the CH0MS bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)icselection; + /* reset the CH0CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT); + /* set the CH0CAPFLT bit */ + TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpwm->icfilter) << 4U); + /* set the CH0EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN; + /* configure TIMER channel input capture prescaler value */ + timer_channel_input_capture_prescaler_config(timer_periph,TIMER_CH_0,(uint16_t)(icpwm->icprescaler)); + } +} + +/*! + \brief configure TIMER hall sensor mode + \param[in] timer_periph: TIMERx(x=0..4,7) + \param[in] hallmode: + only one parameter can be selected which is shown as below: + \arg TIMER_HALLINTERFACE_ENABLE: TIMER hall sensor mode enable + \arg TIMER_HALLINTERFACE_DISABLE: TIMER hall sensor mode disable + \param[out] none + \retval none +*/ +void timer_hall_mode_config(uint32_t timer_periph, uint32_t hallmode) +{ + if(TIMER_HALLINTERFACE_ENABLE == hallmode){ + TIMER_CTL1(timer_periph) |= (uint32_t)TIMER_CTL1_TI0S; + }else if(TIMER_HALLINTERFACE_DISABLE == hallmode){ + TIMER_CTL1(timer_periph) &= ~(uint32_t)TIMER_CTL1_TI0S; + }else{ + /* illegal parameters */ + } +} + +/*! + \brief select TIMER input trigger source + \param[in] timer_periph: please refer to the following parameters + \param[in] intrigger: + only one parameter can be selected which is shown as below: + \arg TIMER_SMCFG_TRGSEL_ITI0: internal trigger 0,TIMERx(x=0..4,7,8,11) + \arg TIMER_SMCFG_TRGSEL_ITI1: internal trigger 1,TIMERx(x=0..4,7,8,11) + \arg TIMER_SMCFG_TRGSEL_ITI2: internal trigger 2,TIMERx(x=0..4,7,8,11) + \arg TIMER_SMCFG_TRGSEL_ITI3: internal trigger 3,TIMERx(x=0..4,7,8,11) + \arg TIMER_SMCFG_TRGSEL_CI0F_ED: TI0 edge detector,TIMERx(x=0..4,7,8,11) + \arg TIMER_SMCFG_TRGSEL_CI0FE0: filtered TIMER input 0,TIMERx(x=0..4,7,8,11) + \arg TIMER_SMCFG_TRGSEL_CI1FE1: filtered TIMER input 1,TIMERx(x=0..4,7,8,11) + \arg TIMER_SMCFG_TRGSEL_ETIFP: external trigger,TIMERx(x=0..4,7) + \param[out] none + \retval none +*/ +void timer_input_trigger_source_select(uint32_t timer_periph, uint32_t intrigger) +{ + TIMER_SMCFG(timer_periph) &= (~(uint32_t)TIMER_SMCFG_TRGS); + TIMER_SMCFG(timer_periph) |= (uint32_t)intrigger; +} + +/*! + \brief select TIMER master mode output trigger source + \param[in] timer_periph: TIMERx(x=0..7) + \param[in] outrigger: + only one parameter can be selected which is shown as below: + \arg TIMER_TRI_OUT_SRC_RESET: the UPG bit as trigger output(TIMERx(x=0..7)) + \arg TIMER_TRI_OUT_SRC_ENABLE: the counter enable signal TIMER_CTL0_CEN as trigger output(TIMERx(x=0..7)) + \arg TIMER_TRI_OUT_SRC_UPDATE: update event as trigger output(TIMERx(x=0..7)) + \arg TIMER_TRI_OUT_SRC_CH0: a capture or a compare match occurred in channel 0 as trigger output TRGO(TIMERx(x=0..4,7)) + \arg TIMER_TRI_OUT_SRC_O0CPRE: O0CPRE as trigger output(TIMERx(x=0..4,7)) + \arg TIMER_TRI_OUT_SRC_O1CPRE: O1CPRE as trigger output(TIMERx(x=0..4,7)) + \arg TIMER_TRI_OUT_SRC_O2CPRE: O2CPRE as trigger output(TIMERx(x=0..4,7)) + \arg TIMER_TRI_OUT_SRC_O3CPRE: O3CPRE as trigger output(TIMERx(x=0..4,7)) + \param[out] none + \retval none +*/ +void timer_master_output_trigger_source_select(uint32_t timer_periph, uint32_t outrigger) +{ + TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_MMC); + TIMER_CTL1(timer_periph) |= (uint32_t)outrigger; +} + +/*! + \brief select TIMER slave mode + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[in] slavemode: + only one parameter can be selected which is shown as below: + \arg TIMER_SLAVE_MODE_DISABLE: slave mode disable + \arg TIMER_ENCODER_MODE0: encoder mode 0 + \arg TIMER_ENCODER_MODE1: encoder mode 1 + \arg TIMER_ENCODER_MODE2: encoder mode 2 + \arg TIMER_SLAVE_MODE_RESTART: restart mode + \arg TIMER_SLAVE_MODE_PAUSE: pause mode + \arg TIMER_SLAVE_MODE_EVENT: event mode + \arg TIMER_SLAVE_MODE_EXTERNAL0: external clock mode 0. + \param[out] none + \retval none +*/ + +void timer_slave_mode_select(uint32_t timer_periph, uint32_t slavemode) +{ + TIMER_SMCFG(timer_periph) &= (~(uint32_t)TIMER_SMCFG_SMC); + + TIMER_SMCFG(timer_periph) |= (uint32_t)slavemode; +} + +/*! + \brief configure TIMER master slave mode + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[in] masterslave: + only one parameter can be selected which is shown as below: + \arg TIMER_MASTER_SLAVE_MODE_ENABLE: master slave mode enable + \arg TIMER_MASTER_SLAVE_MODE_DISABLE: master slave mode disable + \param[out] none + \retval none +*/ +void timer_master_slave_mode_config(uint32_t timer_periph, uint32_t masterslave) +{ + if(TIMER_MASTER_SLAVE_MODE_ENABLE == masterslave){ + TIMER_SMCFG(timer_periph) |= (uint32_t)TIMER_SMCFG_MSM; + }else if(TIMER_MASTER_SLAVE_MODE_DISABLE == masterslave){ + TIMER_SMCFG(timer_periph) &= ~(uint32_t)TIMER_SMCFG_MSM; + }else{ + /* illegal parameters */ + } +} + +/*! + \brief configure TIMER external trigger input + \param[in] timer_periph: TIMERx(x=0..4,7) + \param[in] extprescaler: + only one parameter can be selected which is shown as below: + \arg TIMER_EXT_TRI_PSC_OFF: no divided + \arg TIMER_EXT_TRI_PSC_DIV2: divided by 2 + \arg TIMER_EXT_TRI_PSC_DIV4: divided by 4 + \arg TIMER_EXT_TRI_PSC_DIV8: divided by 8 + \param[in] expolarity: + only one parameter can be selected which is shown as below: + \arg TIMER_ETP_FALLING: active low or falling edge active + \arg TIMER_ETP_RISING: active high or rising edge active + \param[in] extfilter: a value between 0 and 15 + \param[out] none + \retval none +*/ +void timer_external_trigger_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter) +{ + TIMER_SMCFG(timer_periph) &= (~(uint32_t)(TIMER_SMCFG_ETP | TIMER_SMCFG_ETPSC | TIMER_SMCFG_ETFC)); + TIMER_SMCFG(timer_periph) |= (uint32_t)(extprescaler | extpolarity); + TIMER_SMCFG(timer_periph) |= (uint32_t)(extfilter << 8U); +} + +/*! + \brief configure TIMER quadrature decoder mode + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[in] decomode: + only one parameter can be selected which is shown as below: + \arg TIMER_ENCODER_MODE0: counter counts on CI0FE0 edge depending on CI1FE1 level + \arg TIMER_ENCODER_MODE1: counter counts on CI1FE1 edge depending on CI0FE0 level + \arg TIMER_ENCODER_MODE2: counter counts on both CI0FE0 and CI1FE1 edges depending on the level of the other input + \param[in] ic0polarity: + only one parameter can be selected which is shown as below: + \arg TIMER_IC_POLARITY_RISING: capture rising edge + \arg TIMER_IC_POLARITY_FALLING: capture falling edge + \param[in] ic1polarity: + only one parameter can be selected which is shown as below: + \arg TIMER_IC_POLARITY_RISING: capture rising edge + \arg TIMER_IC_POLARITY_FALLING: capture falling edge + \param[out] none + \retval none +*/ +void timer_quadrature_decoder_mode_config(uint32_t timer_periph, uint32_t decomode, uint16_t ic0polarity, uint16_t ic1polarity) +{ + /* configure the quadrature decoder mode */ + TIMER_SMCFG(timer_periph) &= (~(uint32_t)TIMER_SMCFG_SMC); + TIMER_SMCFG(timer_periph) |= (uint32_t)decomode; + /* configure input capture selection */ + TIMER_CHCTL0(timer_periph) &= (uint32_t)(((~(uint32_t)TIMER_CHCTL0_CH0MS)) & ((~(uint32_t)TIMER_CHCTL0_CH1MS))); + TIMER_CHCTL0(timer_periph) |= (uint32_t)(TIMER_IC_SELECTION_DIRECTTI | ((uint32_t)TIMER_IC_SELECTION_DIRECTTI << 8U)); + /* configure channel input capture polarity */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_CH0NP)); + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P | TIMER_CHCTL2_CH1NP)); + TIMER_CHCTL2(timer_periph) |= ((uint32_t)ic0polarity | ((uint32_t)ic1polarity << 4U)); +} + +/*! + \brief configure TIMER internal clock mode + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[out] none + \retval none +*/ +void timer_internal_clock_config(uint32_t timer_periph) +{ + TIMER_SMCFG(timer_periph) &= ~(uint32_t)TIMER_SMCFG_SMC; +} + +/*! + \brief configure TIMER the internal trigger as external clock input + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[in] intrigger: + only one parameter can be selected which is shown as below: + \arg TIMER_SMCFG_TRGSEL_ITI0: internal trigger 0 + \arg TIMER_SMCFG_TRGSEL_ITI1: internal trigger 1 + \arg TIMER_SMCFG_TRGSEL_ITI2: internal trigger 2 + \arg TIMER_SMCFG_TRGSEL_ITI3: internal trigger 3 + \param[out] none + \retval none +*/ +void timer_internal_trigger_as_external_clock_config(uint32_t timer_periph, uint32_t intrigger) +{ + timer_input_trigger_source_select(timer_periph,intrigger); + TIMER_SMCFG(timer_periph) &= ~(uint32_t)TIMER_SMCFG_SMC; + TIMER_SMCFG(timer_periph) |= (uint32_t)TIMER_SLAVE_MODE_EXTERNAL0; +} + +/*! + \brief configure TIMER the external trigger as external clock input + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[in] extrigger: + only one parameter can be selected which is shown as below: + \arg TIMER_SMCFG_TRGSEL_CI0F_ED: TI0 edge detector + \arg TIMER_SMCFG_TRGSEL_CI0FE0: filtered TIMER input 0 + \arg TIMER_SMCFG_TRGSEL_CI1FE1: filtered TIMER input 1 + \param[in] expolarity: + only one parameter can be selected which is shown as below: + \arg TIMER_IC_POLARITY_RISING: active high or rising edge active + \arg TIMER_IC_POLARITY_FALLING: active low or falling edge active + \param[in] extfilter: a value between 0 and 15 + \param[out] none + \retval none +*/ +void timer_external_trigger_as_external_clock_config(uint32_t timer_periph, uint32_t extrigger, uint16_t extpolarity, uint32_t extfilter) +{ + if(TIMER_SMCFG_TRGSEL_CI1FE1 == extrigger){ + /* reset the CH1EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN); + /* reset the CH1NP bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P|TIMER_CHCTL2_CH1NP)); + /* set the CH1NP bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)extpolarity << 4U); + /* reset the CH1MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS); + /* set the CH1MS bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)TIMER_IC_SELECTION_DIRECTTI<< 8U); + /* reset the CH1CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT); + /* set the CH1CAPFLT bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)(extfilter << 8U); + /* set the CH1EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN; + }else{ + /* reset the CH0EN bit */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN); + /* reset the CH0P and CH0NP bits */ + TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P|TIMER_CHCTL2_CH0NP)); + /* set the CH0P and CH0NP bits */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)extpolarity; + /* reset the CH0MS bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS); + /* set the CH0MS bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)TIMER_IC_SELECTION_DIRECTTI; + /* reset the CH0CAPFLT bit */ + TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT); + /* reset the CH0CAPFLT bit */ + TIMER_CHCTL0(timer_periph) |= (uint32_t)extfilter; + /* set the CH0EN bit */ + TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN; + } + /* select TIMER input trigger source */ + timer_input_trigger_source_select(timer_periph,extrigger); + /* reset the SMC bit */ + TIMER_SMCFG(timer_periph) &= (~(uint32_t)TIMER_SMCFG_SMC); + /* set the SMC bit */ + TIMER_SMCFG(timer_periph) |= (uint32_t)TIMER_SLAVE_MODE_EXTERNAL0; +} + +/*! + \brief configure TIMER the external clock mode0 + \param[in] timer_periph: TIMERx(x=0..4,7,8,11) + \param[in] extprescaler: + only one parameter can be selected which is shown as below: + \arg TIMER_EXT_TRI_PSC_OFF: no divided + \arg TIMER_EXT_TRI_PSC_DIV2: divided by 2 + \arg TIMER_EXT_TRI_PSC_DIV4: divided by 4 + \arg TIMER_EXT_TRI_PSC_DIV8: divided by 8 + \param[in] expolarity: + only one parameter can be selected which is shown as below: + \arg TIMER_ETP_FALLING: active low or falling edge active + \arg TIMER_ETP_RISING: active high or rising edge active + \param[in] extfilter: a value between 0 and 15 + \param[out] none + \retval none +*/ +void timer_external_clock_mode0_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter) +{ + /* configure TIMER external trigger input */ + timer_external_trigger_config(timer_periph, extprescaler, extpolarity, extfilter); + /* reset the SMC bit,TRGS bit */ + TIMER_SMCFG(timer_periph) &= (~(uint32_t)(TIMER_SMCFG_SMC | TIMER_SMCFG_TRGS)); + /* set the SMC bit,TRGS bit */ + TIMER_SMCFG(timer_periph) |= (uint32_t)(TIMER_SLAVE_MODE_EXTERNAL0 | TIMER_SMCFG_TRGSEL_ETIFP); +} + +/*! + \brief configure TIMER the external clock mode1 + \param[in] timer_periph: TIMERx(x=0..4,7) + \param[in] extprescaler: + only one parameter can be selected which is shown as below: + \arg TIMER_EXT_TRI_PSC_OFF: no divided + \arg TIMER_EXT_TRI_PSC_DIV2: divided by 2 + \arg TIMER_EXT_TRI_PSC_DIV4: divided by 4 + \arg TIMER_EXT_TRI_PSC_DIV8: divided by 8 + \param[in] extpolarity: + only one parameter can be selected which is shown as below: + \arg TIMER_ETP_FALLING: active low or falling edge active + \arg TIMER_ETP_RISING: active high or rising edge active + \param[in] extfilter: a value between 0 and 15 + \param[out] none + \retval none +*/ +void timer_external_clock_mode1_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter) +{ + /* configure TIMER external trigger input */ + timer_external_trigger_config(timer_periph, extprescaler, extpolarity, extfilter); + TIMER_SMCFG(timer_periph) |= (uint32_t)TIMER_SMCFG_SMC1; +} + +/*! + \brief disable TIMER the external clock mode1 + \param[in] timer_periph: TIMERx(x=0..4,7) + \param[out] none + \retval none +*/ +void timer_external_clock_mode1_disable(uint32_t timer_periph) +{ + TIMER_SMCFG(timer_periph) &= ~(uint32_t)TIMER_SMCFG_SMC1; +} + +/*! + \brief enable the TIMER interrupt + \param[in] timer_periph: please refer to the following parameters + \param[in] interrupt: timer interrupt enable source + only one parameter can be selected which is shown as below: + \arg TIMER_INT_UP: update interrupt enable, TIMERx(x=0..13) + \arg TIMER_INT_CH0: channel 0 interrupt enable, TIMERx(x=0..4,7..13) + \arg TIMER_INT_CH1: channel 1 interrupt enable, TIMERx(x=0..4,7,8,11) + \arg TIMER_INT_CH2: channel 2 interrupt enable, TIMERx(x=0..4,7) + \arg TIMER_INT_CH3: channel 3 interrupt enable , TIMERx(x=0..4,7) + \arg TIMER_INT_CMT: commutation interrupt enable, TIMERx(x=0,7) + \arg TIMER_INT_TRG: trigger interrupt enable, TIMERx(x=0..4,7,8,11) + \arg TIMER_INT_BRK: break interrupt enable, TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_interrupt_enable(uint32_t timer_periph, uint32_t interrupt) +{ + TIMER_DMAINTEN(timer_periph) |= (uint32_t) interrupt; +} + +/*! + \brief disable the TIMER interrupt + \param[in] timer_periph: please refer to the following parameters + \param[in] interrupt: timer interrupt source disable + only one parameter can be selected which is shown as below: + \arg TIMER_INT_UP: update interrupt disable, TIMERx(x=0..13) + \arg TIMER_INT_CH0: channel 0 interrupt disable, TIMERx(x=0..4,7..13) + \arg TIMER_INT_CH1: channel 1 interrupt disable, TIMERx(x=0..4,7,8,11) + \arg TIMER_INT_CH2: channel 2 interrupt disable, TIMERx(x=0..4,7) + \arg TIMER_INT_CH3: channel 3 interrupt disable , TIMERx(x=0..4,7) + \arg TIMER_INT_CMT: commutation interrupt disable, TIMERx(x=0,7) + \arg TIMER_INT_TRG: trigger interrupt disable, TIMERx(x=0..4,7,8,11) + \arg TIMER_INT_BRK: break interrupt disable, TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_interrupt_disable(uint32_t timer_periph, uint32_t interrupt) +{ + TIMER_DMAINTEN(timer_periph) &= (~(uint32_t)interrupt); +} + +/*! + \brief get timer interrupt flag + \param[in] timer_periph: please refer to the following parameters + \param[in] interrupt: the timer interrupt bits + only one parameter can be selected which is shown as below: + \arg TIMER_INT_FLAG_UP: update interrupt flag,TIMERx(x=0..13) + \arg TIMER_INT_FLAG_CH0: channel 0 interrupt flag,TIMERx(x=0..4,7..13) + \arg TIMER_INT_FLAG_CH1: channel 1 interrupt flag,TIMERx(x=0..4,7,8,11) + \arg TIMER_INT_FLAG_CH2: channel 2 interrupt flag,TIMERx(x=0..4,7) + \arg TIMER_INT_FLAG_CH3: channel 3 interrupt flag,TIMERx(x=0..4,7) + \arg TIMER_INT_FLAG_CMT: channel commutation interrupt flag,TIMERx(x=0,7) + \arg TIMER_INT_FLAG_TRG: trigger interrupt flag,TIMERx(x=0,7,8,11) + \arg TIMER_INT_FLAG_BRK: break interrupt flag,TIMERx(x=0,7) + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus timer_interrupt_flag_get(uint32_t timer_periph, uint32_t interrupt) +{ + uint32_t val; + val = (TIMER_DMAINTEN(timer_periph) & interrupt); + if((RESET != (TIMER_INTF(timer_periph) & interrupt) ) && (RESET != val)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear TIMER interrupt flag + \param[in] timer_periph: please refer to the following parameters + \param[in] interrupt: the timer interrupt bits + only one parameter can be selected which is shown as below: + \arg TIMER_INT_FLAG_UP: update interrupt flag,TIMERx(x=0..13) + \arg TIMER_INT_FLAG_CH0: channel 0 interrupt flag,TIMERx(x=0..4,7..13) + \arg TIMER_INT_FLAG_CH1: channel 1 interrupt flag,TIMERx(x=0..4,7,8,11) + \arg TIMER_INT_FLAG_CH2: channel 2 interrupt flag,TIMERx(x=0..4,7) + \arg TIMER_INT_FLAG_CH3: channel 3 interrupt flag,TIMERx(x=0..4,7) + \arg TIMER_INT_FLAG_CMT: channel commutation interrupt flag,TIMERx(x=0,7) + \arg TIMER_INT_FLAG_TRG: trigger interrupt flag,TIMERx(x=0,7,8,11) + \arg TIMER_INT_FLAG_BRK: break interrupt flag,TIMERx(x=0,7) + \param[out] none + \retval none +*/ +void timer_interrupt_flag_clear(uint32_t timer_periph, uint32_t interrupt) +{ + TIMER_INTF(timer_periph) &= (~(uint32_t)interrupt); +} + +/*! + \brief get TIMER flags + \param[in] timer_periph: please refer to the following parameters + \param[in] flag: the timer interrupt flags + only one parameter can be selected which is shown as below: + \arg TIMER_FLAG_UP: update flag,TIMERx(x=0..13) + \arg TIMER_FLAG_CH0: channel 0 flag,TIMERx(x=0..4,7..13) + \arg TIMER_FLAG_CH1: channel 1 flag,TIMERx(x=0..4,7,8,11) + \arg TIMER_FLAG_CH2: channel 2 flag,TIMERx(x=0..4,7) + \arg TIMER_FLAG_CH3: channel 3 flag,TIMERx(x=0..4,7) + \arg TIMER_FLAG_CMT: channel commutation flag,TIMERx(x=0,7) + \arg TIMER_FLAG_TRG: trigger flag,TIMERx(x=0,7,8,11) + \arg TIMER_FLAG_BRK: break flag,TIMERx(x=0,7) + \arg TIMER_FLAG_CH0O: channel 0 overcapture flag,TIMERx(x=0..4,7..11) + \arg TIMER_FLAG_CH1O: channel 1 overcapture flag,TIMERx(x=0..4,7,8,11) + \arg TIMER_FLAG_CH2O: channel 2 overcapture flag,TIMERx(x=0..4,7) + \arg TIMER_FLAG_CH3O: channel 3 overcapture flag,TIMERx(x=0..4,7) + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus timer_flag_get(uint32_t timer_periph, uint32_t flag) +{ + if(RESET != (TIMER_INTF(timer_periph) & flag)){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear TIMER flags + \param[in] timer_periph: please refer to the following parameters + \param[in] flag: the timer interrupt flags + only one parameter can be selected which is shown as below: + \arg TIMER_FLAG_UP: update flag,TIMERx(x=0..13) + \arg TIMER_FLAG_CH0: channel 0 flag,TIMERx(x=0..4,7..13) + \arg TIMER_FLAG_CH1: channel 1 flag,TIMERx(x=0..4,7,8,11) + \arg TIMER_FLAG_CH2: channel 2 flag,TIMERx(x=0..4,7) + \arg TIMER_FLAG_CH3: channel 3 flag,TIMERx(x=0..4,7) + \arg TIMER_FLAG_CMT: channel control update flag,TIMERx(x=0,7) + \arg TIMER_FLAG_TRG: trigger flag,TIMERx(x=0,7,8,11) + \arg TIMER_FLAG_BRK: break flag,TIMERx(x=0,7) + \arg TIMER_FLAG_CH0O: channel 0 overcapture flag,TIMERx(x=0..4,7..11) + \arg TIMER_FLAG_CH1O: channel 1 overcapture flag,TIMERx(x=0..4,7,8,11) + \arg TIMER_FLAG_CH2O: channel 2 overcapture flag,TIMERx(x=0..4,7) + \arg TIMER_FLAG_CH3O: channel 3 overcapture flag,TIMERx(x=0..4,7) + \param[out] none + \retval none +*/ +void timer_flag_clear(uint32_t timer_periph, uint32_t flag) +{ + TIMER_INTF(timer_periph) &= (~(uint32_t)flag); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_usart.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_usart.c new file mode 100644 index 0000000000000000000000000000000000000000..3e6c97ee6f7aff3a706eaffabf8f56c3f3d34928 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_usart.c @@ -0,0 +1,767 @@ +/*! + \file gd32f10x_usart.c + \brief USART driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.1, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_usart.h" + +/*! + \brief reset USART/UART + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_deinit(uint32_t usart_periph) +{ + switch(usart_periph){ + case USART0: + /* reset USART0 */ + rcu_periph_reset_enable(RCU_USART0RST); + rcu_periph_reset_disable(RCU_USART0RST); + break; + case USART1: + /* reset USART1 */ + rcu_periph_reset_enable(RCU_USART1RST); + rcu_periph_reset_disable(RCU_USART1RST); + break; + case USART2: + /* reset USART2 */ + rcu_periph_reset_enable(RCU_USART2RST); + rcu_periph_reset_disable(RCU_USART2RST); + break; + case UART3: + /* reset UART3 */ + rcu_periph_reset_enable(RCU_UART3RST); + rcu_periph_reset_disable(RCU_UART3RST); + break; + case UART4: + /* reset UART4 */ + rcu_periph_reset_enable(RCU_UART4RST); + rcu_periph_reset_disable(RCU_UART4RST); + break; + default: + break; + } +} + +/*! + \brief configure USART baud rate value + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] baudval: baud rate value + \param[out] none + \retval none +*/ +void usart_baudrate_set(uint32_t usart_periph, uint32_t baudval) +{ + uint32_t uclk=0U, intdiv=0U, fradiv=0U, udiv=0U; + switch(usart_periph){ + /* get clock frequency */ + case USART0: + /* get USART0 clock */ + uclk=rcu_clock_freq_get(CK_APB2); + break; + case USART1: + /* get USART1 clock */ + uclk=rcu_clock_freq_get(CK_APB1); + break; + case USART2: + /* get USART2 clock */ + uclk=rcu_clock_freq_get(CK_APB1); + break; + case UART3: + /* get UART3 clock */ + uclk=rcu_clock_freq_get(CK_APB1); + break; + case UART4: + /* get UART4 clock */ + uclk=rcu_clock_freq_get(CK_APB1); + break; + default: + break; + } + /* oversampling by 16, configure the value of USART_BAUD */ + udiv = (uclk+baudval/2U)/baudval; + intdiv = udiv & (0x0000fff0U); + fradiv = udiv & (0x0000000fU); + USART_BAUD(usart_periph) = ((USART_BAUD_FRADIV | USART_BAUD_INTDIV) & (intdiv | fradiv)); +} + +/*! + \brief configure USART parity + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] paritycfg: configure USART parity + only one parameter can be selected which is shown as below: + \arg USART_PM_NONE: no parity + \arg USART_PM_ODD: odd parity + \arg USART_PM_EVEN: even parity + \param[out] none + \retval none +*/ +void usart_parity_config(uint32_t usart_periph, uint32_t paritycfg) +{ + /* clear USART_CTL0 PM,PCEN bits */ + USART_CTL0(usart_periph) &= ~(USART_CTL0_PM | USART_CTL0_PCEN); + /* configure USART parity mode */ + USART_CTL0(usart_periph) |= paritycfg ; +} + +/*! + \brief configure USART word length + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] wlen: USART word length configure + only one parameter can be selected which is shown as below: + \arg USART_WL_8BIT: 8 bits + \arg USART_WL_9BIT: 9 bits + \param[out] none + \retval none +*/ +void usart_word_length_set(uint32_t usart_periph, uint32_t wlen) +{ + /* clear USART_CTL0 WL bit */ + USART_CTL0(usart_periph) &= ~USART_CTL0_WL; + /* configure USART word length */ + USART_CTL0(usart_periph) |= wlen; +} + +/*! + \brief configure USART stop bit length + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] stblen: USART stop bit configure + only one parameter can be selected which is shown as below: + \arg USART_STB_1BIT: 1 bit + \arg USART_STB_0_5BIT: 0.5 bit, not available for UARTx(x=3,4) + \arg USART_STB_2BIT: 2 bits + \arg USART_STB_1_5BIT: 1.5 bits, not available for UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_stop_bit_set(uint32_t usart_periph, uint32_t stblen) +{ + /* clear USART_CTL1 STB bits */ + USART_CTL1(usart_periph) &= ~USART_CTL1_STB; + /* configure USART stop bits */ + USART_CTL1(usart_periph) |= stblen; +} +/*! + \brief enable USART + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_enable(uint32_t usart_periph) +{ + USART_CTL0(usart_periph) |= USART_CTL0_UEN; +} + +/*! + \brief disable USART + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_disable(uint32_t usart_periph) +{ + USART_CTL0(usart_periph) &= ~(USART_CTL0_UEN); +} + +/*! + \brief configure USART transmitter + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] txconfig: enable or disable USART transmitter + only one parameter can be selected which is shown as below: + \arg USART_TRANSMIT_ENABLE: enable USART transmission + \arg USART_TRANSMIT_DISABLE: enable USART transmission + \param[out] none + \retval none +*/ +void usart_transmit_config(uint32_t usart_periph, uint32_t txconfig) +{ + uint32_t ctl = 0U; + + ctl = USART_CTL0(usart_periph); + ctl &= ~USART_CTL0_TEN; + ctl |= txconfig; + /* configure transfer mode */ + USART_CTL0(usart_periph) = ctl; +} + +/*! + \brief configure USART receiver + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] rxconfig: enable or disable USART receiver + only one parameter can be selected which is shown as below: + \arg USART_RECEIVE_ENABLE: enable USART reception + \arg USART_RECEIVE_DISABLE: disable USART reception + \param[out] none + \retval none +*/ +void usart_receive_config(uint32_t usart_periph, uint32_t rxconfig) +{ + uint32_t ctl = 0U; + + ctl = USART_CTL0(usart_periph); + ctl &= ~USART_CTL0_REN; + ctl |= rxconfig; + /* configure receiver mode */ + USART_CTL0(usart_periph) = ctl; +} + +/*! + \brief USART transmit data function + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] data: data of transmission + \param[out] none + \retval none +*/ +void usart_data_transmit(uint32_t usart_periph, uint32_t data) +{ + USART_DATA(usart_periph) = USART_DATA_DATA & data; +} + +/*! + \brief USART receive data function + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval data of received +*/ +uint16_t usart_data_receive(uint32_t usart_periph) +{ + return (uint16_t)(GET_BITS(USART_DATA(usart_periph), 0U, 8U)); +} + +/*! + \brief configure the address of the USART in wake up by address match mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] addr: address of USART/UART + \param[out] none + \retval none +*/ +void usart_address_config(uint32_t usart_periph, uint8_t addr) +{ + USART_CTL1(usart_periph) &= ~(USART_CTL1_ADDR); + USART_CTL1(usart_periph) |= (USART_CTL1_ADDR & addr); +} + +/*! + \brief receiver in mute mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_mute_mode_enable(uint32_t usart_periph) +{ + USART_CTL0(usart_periph) |= USART_CTL0_RWU; +} + +/*! + \brief receiver in active mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_mute_mode_disable(uint32_t usart_periph) +{ + USART_CTL0(usart_periph) &= ~(USART_CTL0_RWU); +} + +/*! + \brief configure wakeup method in mute mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] wmethod: two methods be used to enter or exit the mute mode + only one parameter can be selected which is shown as below: + \arg USART_WM_IDLE: idle line + \arg USART_WM_ADDR: address mask + \param[out] none + \retval none +*/ +void usart_mute_mode_wakeup_config(uint32_t usart_periph, uint32_t wmethod) +{ + USART_CTL0(usart_periph) &= ~(USART_CTL0_WM); + USART_CTL0(usart_periph) |= wmethod; +} + +/*! + \brief enable LIN mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_lin_mode_enable(uint32_t usart_periph) +{ + USART_CTL1(usart_periph) |= USART_CTL1_LMEN; +} + +/*! + \brief disable LIN mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_lin_mode_disable(uint32_t usart_periph) +{ + USART_CTL1(usart_periph) &= ~(USART_CTL1_LMEN); +} + +/*! + \brief configure lin break frame length + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] lblen: lin break frame length + only one parameter can be selected which is shown as below: + \arg USART_LBLEN_10B: 10 bits + \arg USART_LBLEN_11B: 11 bits + \param[out] none + \retval none +*/ +void usart_lin_break_detection_length_config(uint32_t usart_periph, uint32_t lblen) +{ + USART_CTL1(usart_periph) &= ~(USART_CTL1_LBLEN); + USART_CTL1(usart_periph) |= (USART_CTL1_LBLEN & lblen); +} + +/*! + \brief send break frame + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_send_break(uint32_t usart_periph) +{ + USART_CTL0(usart_periph) |= USART_CTL0_SBKCMD; +} + +/*! + \brief enable half duplex mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_halfduplex_enable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) |= USART_CTL2_HDEN; +} + +/*! + \brief disable half duplex mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_halfduplex_disable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) &= ~(USART_CTL2_HDEN); +} + +/*! + \brief enable CK pin in synchronous mode + \param[in] usart_periph: USARTx(x=0,1,2) + \param[out] none + \retval none +*/ +void usart_synchronous_clock_enable(uint32_t usart_periph) +{ + USART_CTL1(usart_periph) |= USART_CTL1_CKEN; +} + +/*! + \brief disable CK pin in synchronous mode + \param[in] usart_periph: USARTx(x=0,1,2) + \param[out] none + \retval none +*/ +void usart_synchronous_clock_disable(uint32_t usart_periph) +{ + USART_CTL1(usart_periph) &= ~(USART_CTL1_CKEN); +} + +/*! + \brief configure USART synchronous mode parameters + \param[in] usart_periph: USARTx(x=0,1,2) + \param[in] clen: CK length + only one parameter can be selected which is shown as below: + \arg USART_CLEN_NONE: there are 7 CK pulses for an 8 bit frame and 8 CK pulses for a 9 bit frame + \arg USART_CLEN_EN: there are 8 CK pulses for an 8 bit frame and 9 CK pulses for a 9 bit frame + \param[in] cph: clock phase + only one parameter can be selected which is shown as below: + \arg USART_CPH_1CK: first clock transition is the first data capture edge + \arg USART_CPH_2CK: second clock transition is the first data capture edge + \param[in] cpl: clock polarity + only one parameter can be selected which is shown as below: + \arg USART_CPL_LOW: steady low value on CK pin + \arg USART_CPL_HIGH: steady high value on CK pin + \param[out] none + \retval none +*/ +void usart_synchronous_clock_config(uint32_t usart_periph, uint32_t clen, uint32_t cph, uint32_t cpl) +{ + uint32_t ctl = 0U; + + /* read USART_CTL1 register */ + ctl = USART_CTL1(usart_periph); + ctl &= ~(USART_CTL1_CLEN | USART_CTL1_CPH | USART_CTL1_CPL); + /* set CK length, CK phase, CK polarity */ + ctl |= (USART_CTL1_CLEN & clen) | (USART_CTL1_CPH & cph) | (USART_CTL1_CPL & cpl); + + USART_CTL1(usart_periph) = ctl; +} + +/*! + \brief configure guard time value in smartcard mode + \param[in] usart_periph: USARTx(x=0,1,2) + \param[in] gaut: guard time value + \param[out] none + \retval none +*/ +void usart_guard_time_config(uint32_t usart_periph,uint32_t gaut) +{ + USART_GP(usart_periph) &= ~(USART_GP_GUAT); + USART_GP(usart_periph) |= (USART_GP_GUAT & ((gaut)<<8)); +} + +/*! + \brief enable smartcard mode + \param[in] usart_periph: USARTx(x=0,1,2) + \param[out] none + \retval none +*/ +void usart_smartcard_mode_enable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) |= USART_CTL2_SCEN; +} + +/*! + \brief disable smartcard mode + \param[in] usart_periph: USARTx(x=0,1,2) + \param[out] none + \retval none +*/ +void usart_smartcard_mode_disable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) &= ~(USART_CTL2_SCEN); +} + +/*! + \brief enable NACK in smartcard mode + \param[in] usart_periph: USARTx(x=0,1,2) + \param[out] none + \retval none +*/ +void usart_smartcard_mode_nack_enable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) |= USART_CTL2_NKEN; +} + +/*! + \brief disable NACK in smartcard mode + \param[in] usart_periph: USARTx(x=0,1,2) + \param[out] none + \retval none +*/ +void usart_smartcard_mode_nack_disable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) &= ~(USART_CTL2_NKEN); +} + +/*! + \brief enable IrDA mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_irda_mode_enable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) |= USART_CTL2_IREN; +} + +/*! + \brief disable IrDA mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[out] none + \retval none +*/ +void usart_irda_mode_disable(uint32_t usart_periph) +{ + USART_CTL2(usart_periph) &= ~(USART_CTL2_IREN); +} + +/*! + \brief configure the peripheral clock prescaler in USART IrDA low-power mode + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] psc: 0x00-0xFF + \param[out] none + \retval none +*/ +void usart_prescaler_config(uint32_t usart_periph, uint8_t psc) +{ + USART_GP(usart_periph) &= ~(USART_GP_PSC); + USART_GP(usart_periph) |= psc; +} + +/*! + \brief configure IrDA low-power + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] irlp: IrDA low-power or normal + only one parameter can be selected which is shown as below: + \arg USART_IRLP_LOW: low-power + \arg USART_IRLP_NORMAL: normal + \param[out] none + \retval none +*/ +void usart_irda_lowpower_config(uint32_t usart_periph, uint32_t irlp) +{ + USART_CTL2(usart_periph) &= ~(USART_CTL2_IRLP); + USART_CTL2(usart_periph) |= (USART_CTL2_IRLP & irlp); +} + +/*! + \brief configure hardware flow control RTS + \param[in] usart_periph: USARTx(x=0,1,2) + \param[in] hardwareflow: enable or disable RTS + only one parameter can be selected which is shown as below: + \arg USART_RTS_ENABLE: enable RTS + \arg USART_RTS_DISABLE: disable RTS + \param[out] none + \retval none +*/ +void usart_hardware_flow_rts_config(uint32_t usart_periph, uint32_t rtsconfig) +{ + uint32_t ctl = 0U; + + ctl = USART_CTL2(usart_periph); + ctl &= ~USART_CTL2_RTSEN; + ctl |= rtsconfig; + /* configure RTS */ + USART_CTL2(usart_periph) = ctl; +} + +/*! + \brief configure hardware flow control CTS + \param[in] usart_periph: USARTx(x=0,1,2) + \param[in] hardwareflow: enable or disable CTS + only one parameter can be selected which is shown as below: + \arg USART_CTS_ENABLE: enable CTS + \arg USART_CTS_DISABLE: disable CTS + \param[out] none + \retval none +*/ +void usart_hardware_flow_cts_config(uint32_t usart_periph, uint32_t ctsconfig) +{ + uint32_t ctl = 0U; + + ctl = USART_CTL2(usart_periph); + ctl &= ~USART_CTL2_CTSEN; + ctl |= ctsconfig; + /* configure CTS */ + USART_CTL2(usart_periph) = ctl; +} + +/*! + \brief configure USART DMA reception + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3) + \param[in] dmacmd: enable or disable DMA for reception + only one parameter can be selected which is shown as below: + \arg USART_DENR_ENABLE: DMA enable for reception + \arg USART_DENR_DISABLE: DMA disable for reception + \param[out] none + \retval none +*/ +void usart_dma_receive_config(uint32_t usart_periph, uint32_t dmacmd) +{ + uint32_t ctl = 0U; + + ctl = USART_CTL2(usart_periph); + ctl &= ~USART_CTL2_DENR; + ctl |= dmacmd; + /* configure DMA reception */ + USART_CTL2(usart_periph) = ctl; +} + +/*! + \brief configure USART DMA transmission + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3) + \param[in] dmacmd: enable or disable DMA for transmission + only one parameter can be selected which is shown as below: + \arg USART_DENT_ENABLE: DMA enable for transmission + \arg USART_DENT_DISABLE: DMA disable for transmission + \param[out] none + \retval none +*/ +void usart_dma_transmit_config(uint32_t usart_periph, uint32_t dmacmd) +{ + uint32_t ctl = 0U; + + ctl = USART_CTL2(usart_periph); + ctl &= ~USART_CTL2_DENT; + ctl |= dmacmd; + /* configure DMA transmission */ + USART_CTL2(usart_periph) = ctl; +} + +/*! + \brief get flag in STAT register + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] flag: USART flags, refer to usart_flag_enum + only one parameter can be selected which is shown as below: + \arg USART_FLAG_CTSF: CTS change flag + \arg USART_FLAG_LBDF: LIN break detected flag + \arg USART_FLAG_TBE: transmit data buffer empty + \arg USART_FLAG_TC: transmission complete + \arg USART_FLAG_RBNE: read data buffer not empty + \arg USART_FLAG_IDLEF: IDLE frame detected flag + \arg USART_FLAG_ORERR: overrun error + \arg USART_FLAG_NERR: noise error flag + \arg USART_FLAG_FERR: frame error flag + \arg USART_FLAG_PERR: parity error flag + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus usart_flag_get(uint32_t usart_periph, usart_flag_enum flag) +{ + if(RESET != (USART_REG_VAL(usart_periph, flag) & BIT(USART_BIT_POS(flag)))){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear flag in STAT register + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] flag: USART flags, refer to usart_flag_enum + only one parameter can be selected which is shown as below: + \arg USART_FLAG_CTSF: CTS change flag + \arg USART_FLAG_LBDF: LIN break detected flag + \arg USART_FLAG_TC: transmission complete + \arg USART_FLAG_RBNE: read data buffer not empty + \param[out] none + \retval none +*/ +void usart_flag_clear(uint32_t usart_periph, usart_flag_enum flag) +{ + USART_REG_VAL(usart_periph, flag) &= ~BIT(USART_BIT_POS(flag)); +} + +/*! + \brief enable USART interrupt + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] int_flag + only one parameter can be selected which is shown as below: + \arg USART_INT_PERR: parity error interrupt + \arg USART_INT_TBE: transmitter buffer empty interrupt + \arg USART_INT_TC: transmission complete interrupt + \arg USART_INT_RBNE: read data buffer not empty interrupt and overrun error interrupt + \arg USART_INT_IDLE: IDLE line detected interrupt + \arg USART_INT_LBD: LIN break detected interrupt + \arg USART_INT_ERR: error interrupt + \arg USART_INT_CTS: CTS interrupt + \param[out] none + \retval none +*/ +void usart_interrupt_enable(uint32_t usart_periph, uint32_t int_flag) +{ + USART_REG_VAL(usart_periph, int_flag) |= BIT(USART_BIT_POS(int_flag)); +} + +/*! + \brief disable USART interrupt + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] int_flag + only one parameter can be selected which is shown as below: + \arg USART_INT_PERR: parity error interrupt + \arg USART_INT_TBE: transmitter buffer empty interrupt + \arg USART_INT_TC: transmission complete interrupt + \arg USART_INT_RBNE: read data buffer not empty interrupt and overrun error interrupt + \arg USART_INT_IDLE: IDLE line detected interrupt + \arg USART_INT_LBD: LIN break detected interrupt + \arg USART_INT_ERR: error interrupt + \arg USART_INT_CTS: CTS interrupt + \param[out] none + \retval none +*/ +void usart_interrupt_disable(uint32_t usart_periph, uint32_t int_flag) +{ + USART_REG_VAL(usart_periph, int_flag) &= ~BIT(USART_BIT_POS(int_flag)); +} + +/*! + \brief get USART interrupt and flag status + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] int_flag + only one parameter can be selected which is shown as below: + \arg USART_INT_FLAG_PERR: parity error interrupt and flag + \arg USART_INT_FLAG_TBE: transmitter buffer empty interrupt and flag + \arg USART_INT_FLAG_TC: transmission complete interrupt and flag + \arg USART_INT_FLAG_RBNE: read data buffer not empty interrupt and flag + \arg USART_INT_FLAG_RBNE_ORERR: read data buffer not empty interrupt and overrun error flag + \arg USART_INT_FLAG_IDLE: IDLE line detected interrupt and flag + \arg USART_INT_FLAG_LBD: LIN break detected interrupt and flag + \arg USART_INT_FLAG_CTS: CTS interrupt and flag + \arg USART_INT_FLAG_ERR_ORERR: error interrupt and overrun error + \arg USART_INT_FLAG_ERR_NERR: error interrupt and noise error flag + \arg USART_INT_FLAG_ERR_FERR: error interrupt and frame error flag + \param[out] none + \retval FlagStatus +*/ +FlagStatus usart_interrupt_flag_get(uint32_t usart_periph, uint32_t int_flag) +{ + uint32_t intenable = 0U, flagstatus = 0U; + /* get the interrupt enable bit status */ + intenable = (USART_REG_VAL(usart_periph, int_flag) & BIT(USART_BIT_POS(int_flag))); + /* get the corresponding flag bit status */ + flagstatus = (USART_REG_VAL2(usart_periph, int_flag) & BIT(USART_BIT_POS2(int_flag))); + + if(flagstatus && intenable){ + return SET; + }else{ + return RESET; + } +} + +/*! + \brief clear USART interrupt flag in STAT register + \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) + \param[in] flag: USART interrupt flag + only one parameter can be selected which is shown as below: + \arg USART_INT_FLAG_CTS: CTS change flag + \arg USART_INT_FLAG_LBD: LIN break detected flag + \arg USART_INT_FLAG_TC: transmission complete + \arg USART_INT_FLAG_RBNE: read data buffer not empty + \param[out] none + \retval none +*/ +void usart_interrupt_flag_clear(uint32_t usart_periph, uint32_t flag) +{ + USART_REG_VAL2(usart_periph, flag) &= ~BIT(USART_BIT_POS2(flag)); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_wwdgt.c b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_wwdgt.c new file mode 100644 index 0000000000000000000000000000000000000000..633b50423b2cbc6664bb1b3ac3cf61206a62241b --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_standard_peripheral/Source/gd32f10x_wwdgt.c @@ -0,0 +1,150 @@ +/*! + \file gd32f10x_wwdgt.c + \brief WWDGT driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "gd32f10x_wwdgt.h" + +/* write value to WWDGT_CTL_CNT bit field */ +#define CTL_CNT(regval) (BITS(0,6) & ((uint32_t)(regval) << 0)) +/* write value to WWDGT_CFG_WIN bit field */ +#define CFG_WIN(regval) (BITS(0,6) & ((uint32_t)(regval) << 0)) + +/*! + \brief reset the window watchdog timer configuration + \param[in] none + \param[out] none + \retval none +*/ +void wwdgt_deinit(void) +{ + rcu_periph_reset_enable(RCU_WWDGTRST); + rcu_periph_reset_disable(RCU_WWDGTRST); +} + +/*! + \brief start the window watchdog timer counter + \param[in] none + \param[out] none + \retval none +*/ +void wwdgt_enable(void) +{ + WWDGT_CTL |= WWDGT_CTL_WDGTEN; +} + +/*! + \brief configure the window watchdog timer counter value + \param[in] counter_value: 0x00 - 0x7F + \param[out] none + \retval none +*/ +void wwdgt_counter_update(uint16_t counter_value) +{ + uint32_t reg = 0U; + + reg = (WWDGT_CTL & (~WWDGT_CTL_CNT)); + reg |= CTL_CNT(counter_value); + + WWDGT_CTL = reg; +} + +/*! + \brief configure counter value, window value, and prescaler divider value + \param[in] counter: 0x00 - 0x7F + \param[in] window: 0x00 - 0x7F + \param[in] prescaler: wwdgt prescaler value + only one parameter can be selected which is shown as below: + \arg WWDGT_CFG_PSC_DIV1: the time base of window watchdog counter = (PCLK1/4096)/1 + \arg WWDGT_CFG_PSC_DIV2: the time base of window watchdog counter = (PCLK1/4096)/2 + \arg WWDGT_CFG_PSC_DIV4: the time base of window watchdog counter = (PCLK1/4096)/4 + \arg WWDGT_CFG_PSC_DIV8: the time base of window watchdog counter = (PCLK1/4096)/8 + \param[out] none + \retval none +*/ +void wwdgt_config(uint16_t counter, uint16_t window, uint32_t prescaler) +{ + uint32_t reg_cfg = 0U, reg_ctl = 0U; + + /* clear WIN and PSC bits, clear CNT bit */ + reg_cfg = (WWDGT_CFG &(~(WWDGT_CFG_WIN|WWDGT_CFG_PSC))); + reg_ctl = (WWDGT_CTL &(~WWDGT_CTL_CNT)); + + /* configure WIN and PSC bits, configure CNT bit */ + reg_cfg |= CFG_WIN(window); + reg_cfg |= prescaler; + reg_ctl |= CTL_CNT(counter); + + WWDGT_CTL = reg_ctl; + WWDGT_CFG = reg_cfg; +} + +/*! + \brief enable early wakeup interrupt of WWDGT + \param[in] none + \param[out] none + \retval none +*/ +void wwdgt_interrupt_enable(void) +{ + WWDGT_CFG |= WWDGT_CFG_EWIE; +} + +/*! + \brief check early wakeup interrupt state of WWDGT + \param[in] none + \param[out] none + \retval FlagStatus: SET or RESET +*/ +FlagStatus wwdgt_flag_get(void) +{ + if(WWDGT_STAT & WWDGT_STAT_EWIF){ + return SET; + } + + return RESET; +} + +/*! + \brief clear early wakeup interrupt state of WWDGT + \param[in] none + \param[out] none + \retval none +*/ +void wwdgt_flag_clear(void) +{ + WWDGT_STAT &= (~WWDGT_STAT_EWIF); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_core.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_core.h new file mode 100644 index 0000000000000000000000000000000000000000..189be18baec7ef44bde46a2b2e5ac96d157a1e6e --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_core.h @@ -0,0 +1,217 @@ +/*! + \file usbd_core.h + \brief USB device driver core + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_CORE_H +#define USBD_CORE_H + +#include "usbd_conf.h" +#include "usbd_regs.h" + +/* interrupt flag mask which decide what event should be handled by application */ +#define IER_MASK (CTL_STIE | CTL_WKUPIE | CTL_SPSIE \ + | CTL_SOFIE | CTL_ESOFIE | CTL_RSTIE) + +#ifdef LPM_ENABLED +#undef IER_MASK + +#define IER_MASK (CTL_STIE | CTL_WKUPIE | CTL_SPSIE \ + | CTL_SOFIE | CTL_ESOFIE | CTL_RSTIE | CTL_L1REQIE) +#endif /* LPM_ENABLED */ + +/* USB device endpoint0 max packet size */ +#define USBD_EP0_MAX_SIZE 64U + +#define USBD_CONTRL_STATUS_TX() do \ +{ \ + pbuf_reg->tx_count = 0U; \ + USBD_ENDP_TX_STATUS_SET(EP0, EPTX_VALID); \ +} while(0) + +#define USBD_CONTRL_STATUS_RX() do \ +{ \ + USBD_STATUS_OUT_SET(EP0); \ + USBD_ENDP_RX_STATUS_SET(EP0, EPRX_VALID); \ +} while(0) + +#define ENDP_BUF_ADDR (sizeof(usbd_ep_buf_struct) * EP_COUNT) + +/* USB device endpoint type */ +typedef enum +{ + ENDP_CONTROL = 0, /*!< control endpoint type value */ + ENDP_ISOC, /*!< isochronous endpoint type value */ + ENDP_BULK, /*!< bulk endpoint type value */ + ENDP_INT /*!< interupt endpoint type value */ +}usbd_eptype_enum; + +/* USB device endpoint kind */ +typedef enum +{ + ENDP_SNG_BUF = 0, /*!< single buffer endpoint type value */ + ENDP_DBL_BUF /*!< double buffer endpoint type value */ +}usbd_epkind_enum; + +/* transfer direction */ +typedef enum +{ + USBD_RX = 0, /*!< receive direction type value */ + USBD_TX /*!< transmit direction type value */ +}usbd_dir_enum; + +/* USB device status */ +typedef enum +{ + USBD_UNCONNECTED = 0, /*!< USB device unconnected status */ + USBD_DEFAULT, /*!< USB device default status */ + USBD_ADDRESSED, /*!< USB device addressed status */ + USBD_CONFIGURED, /*!< USB device configured status */ + USBD_SUSPENDED, /*!< USB device suspended status */ + USBD_CONNECTED /*!< USB device connected status */ +}usbd_run_status_enum; + +/* USB device operation state */ +typedef enum +{ + USBD_OK = 0, /*!< USB device ok */ + USBD_BUSY, /*!< USB device busy */ + USBD_FAIL /*!< USB device fail */ +}usbd_status_enum; + +typedef struct +{ + uint16_t tx_addr; /*!< transmission address */ + uint16_t reserved0; + uint16_t tx_count; /*!< transmission count */ + uint16_t reserved1; + uint16_t rx_addr; /*!< reception address */ + uint16_t reserved2; + uint16_t rx_count; /*!< reception count */ + uint16_t reserved3; +}usbd_ep_buf_struct; + +/* USB endpoint structure */ +typedef struct +{ + /* basic parameters */ + uint8_t stall; /*!< endpoint stall status */ + uint32_t maxpacket; /*!< the maxpacket of the endpoint */ + + /* transaction level parameters */ + uint8_t *trs_buf; /*!< transaction buffer address */ + uint32_t trs_len; /*!< transaction buffer length */ + uint32_t trs_count; /*!< transaction data counts */ +}usb_ep_struct; + +/* USB standard device request structure */ +typedef struct +{ + uint8_t bmRequestType; /*!< the property of the request */ + uint8_t bRequest; /*!< the code of the request */ + uint16_t wValue; /*!< the value of the request which used to choose the different request in the same code request */ + uint16_t wIndex; /*!< USB standard device request index */ + uint16_t wLength; /*!< the return datas length that the host wants to get */ +}usb_device_req_struct; + +/* USB core driver struct */ +typedef struct +{ + /* basic parameters */ + uint8_t config_num; /*!< the number of the USB device configuration */ + __IO uint8_t status; /*!< USB device status */ + uint8_t prev_status; /*!< the previous USB device status */ + uint8_t remote_wakeup; /*!< the flag that point out the device whether support the remote wakeup function */ + + /* the parameters which needs in control transfer */ + uint8_t setup_packet[8]; /*!< the buffer used to store the setup packet */ + uint32_t ctl_count; /*!< the datas length of control transfer request */ + + /* device endpoints */ + usb_ep_struct in_ep[EP_COUNT]; /*!< the in direction endpoints */ + usb_ep_struct out_ep[EP_COUNT]; /*!< the out direction endpoints */ + +#ifdef LPM_ENABLED + uint8_t *bos_desc; /*!< BOS descriptor */ +#endif /* LPM_ENABLED */ + + uint8_t *dev_desc; /*!< device descriptor */ + uint8_t *config_desc; /*!< configuration descriptor */ + void* const *strings; /*!< configuration strings */ + + /* device class handler */ + usbd_status_enum (*class_init) (void *pudev, uint8_t config_index); + usbd_status_enum (*class_deinit) (void *pudev, uint8_t config_index); + usbd_status_enum (*class_req_handler) (void *pudev, usb_device_req_struct *req); + usbd_status_enum (*class_data_handler) (void *pudev, usbd_dir_enum rx_tx, uint8_t ep_num); +}usbd_core_handle_struct; + +extern uint32_t g_free_buf_addr; +extern usbd_ep_buf_struct *pbuf_reg; + +/* function declarations */ +/* device core register initialization */ +void usbd_core_init (usbd_core_handle_struct *pudev); +/* device core register configure when stop device */ +void usbd_core_deinit (void); + +/* free buffer used from application by toggling the SW_BUF byte */ +void user_buffer_free (uint8_t ep_num, uint8_t dir); + +/* endpoint initialization */ +void usbd_ep_init (usbd_core_handle_struct *pudev, usbd_epkind_enum buf_kind, void *pep_desc); +/* configure the endpoint when it is disabled */ +void usbd_ep_deinit (usbd_core_handle_struct *pudev, uint8_t ep_addr); +/* endpoint prepare to transmit data */ +void usbd_ep_tx (usbd_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint16_t buf_len); +/* endpoint prepare to receive data */ +void usbd_ep_rx (usbd_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint16_t buf_len); +/* set an endpoint to stall status */ +void usbd_ep_stall (usbd_core_handle_struct *pudev, uint8_t ep_addr); +/* clear endpoint stalled status */ +void usbd_ep_clear_stall (usbd_core_handle_struct *pudev, uint8_t ep_addr); +/* write datas from user fifo to USBRAM */ +void usbd_ep_data_write (uint8_t *user_fifo, uint16_t usbram_addr, uint16_t bytes); +/* read datas from USBRAM to user fifo */ +void usbd_ep_data_read (uint8_t *user_fifo, uint16_t usbram_addr, uint16_t bytes); + +/* get the endpoint status */ +uint8_t usbd_ep_status_get (usbd_core_handle_struct *pudev, uint8_t ep_addr); + +/* get the received data length */ +uint16_t usbd_rx_count_get (usbd_core_handle_struct *pudev, uint8_t ep_num); + +#endif /* USBD_CORE_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_int.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_int.h new file mode 100644 index 0000000000000000000000000000000000000000..a524ea615f3752511e36e781ded0778caf3a7261 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_int.h @@ -0,0 +1,62 @@ +/*! + \file usbd_int.h + \brief USB device interrupt handler header file + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_INT_H +#define USBD_INT_H + +#include "usbd_core.h" +#include "usbd_std.h" +#include "usbd_pwr.h" + +/* constants definitions */ +extern usbd_core_handle_struct usb_device_dev; + +typedef struct +{ + uint8_t (*SOF) (usbd_core_handle_struct *pudev); /*!< SOF ISR callback */ +}usbd_int_cb_struct; + +extern usbd_int_cb_struct *usbd_int_fops; + +/* function declarations */ +/* USB device interrupt service routine */ +void usbd_isr (void); +/* handle USB high priority successful transfer event */ +uint8_t usbd_intf_hpst (usbd_core_handle_struct *pudev); + +#endif /* USBD_INT_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_pwr.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_pwr.h new file mode 100644 index 0000000000000000000000000000000000000000..c0e6a21a19d2404609a1f95206bb564577b03d3d --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_pwr.h @@ -0,0 +1,52 @@ +/*! + \file usbd_pwr.h + \brief USB device power management functions prototype + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_PWR_H +#define USBD_PWR_H + +#include "usbd_core.h" + +/* function declarations */ +/* USB wakeup first operation is to wakeup mcu */ +void resume_mcu (void); +/* set USB device to suspend mode */ +void usbd_suspend (void); +/* start to remote wakeup */ +void usbd_remote_wakeup_active (void); + +#endif /* USBD_PWR_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_regs.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_regs.h new file mode 100644 index 0000000000000000000000000000000000000000..ef3c5c8fcce6ae203ef2125bf0c071d3c81662d3 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_regs.h @@ -0,0 +1,297 @@ +/*! + \file usbd_regs.h + \brief USB device registers + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_REGS_H +#define USBD_REGS_H + +#include "usbd_conf.h" + +/* USB device registers base address */ +#define USBD USBD_BASE +#define USBD_RAM (APB1_BUS_BASE + 0x00006000U) + +/* registers definitions */ +/* common registers */ +#define USBD_CTL (REG32(USBD + 0x40U)) /*!< control register */ +#define USBD_INTF (REG32(USBD + 0x44U)) /*!< interrupt flag register */ +#define USBD_STAT (REG32(USBD + 0x48U)) /*!< status register */ +#define USBD_DADDR (REG32(USBD + 0x4CU)) /*!< device address register */ +#define USBD_BADDR (REG32(USBD + 0x50U)) /*!< buffer address register */ + +/* endpoint control and status register */ +#define USBD_EPxCS(ep_id) (REG32(USBD + (ep_id) * 4U)) /*!< endpoint x control and status register address */ + +/* LPM Registers */ +#define USBD_LPMCS (REG32(USBD + 0x54U)) /*!< USBD LPM control and status register */ + +/* bits definitions */ +/* USBD_CTL */ +#define CTL_STIE BIT(15) /*!< successful transfer interrupt enable mask */ +#define CTL_PMOUIE BIT(14) /*!< packet memory overrun/underrun interrupt enable mask */ +#define CTL_ERRIE BIT(13) /*!< error interrupt enable mask */ +#define CTL_WKUPIE BIT(12) /*!< wakeup interrupt enable mask */ +#define CTL_SPSIE BIT(11) /*!< suspend state interrupt enable mask */ +#define CTL_RSTIE BIT(10) /*!< reset interrupt enable mask */ +#define CTL_SOFIE BIT(9) /*!< start of frame interrupt enable mask */ +#define CTL_ESOFIE BIT(8) /*!< expected start of frame interrupt enable mask */ +#define CTL_L1REQIE BIT(7) /*!< LPM L1 state request interrupt enable */ +#define CTL_L1RSREQ BIT(5) /*!< LPM L1 resume request */ +#define CTL_RSREQ BIT(4) /*!< resume request */ +#define CTL_SETSPS BIT(3) /*!< set suspend state */ +#define CTL_LOWM BIT(2) /*!< low-power mode at suspend state */ +#define CTL_CLOSE BIT(1) /*!< goes to close state */ +#define CTL_SETRST BIT(0) /*!< set USB reset */ + +/* USBD_INTF */ +#define INTF_STIF BIT(15) /*!< successful transfer interrupt flag (read only bit) */ +#define INTF_PMOUIF BIT(14) /*!< packet memory overrun/underrun interrupt flag (clear-only bit) */ +#define INTF_ERRIF BIT(13) /*!< error interrupt flag (clear-only bit) */ +#define INTF_WKUPIF BIT(12) /*!< wakeup interrupt flag (clear-only bit) */ +#define INTF_SPSIF BIT(11) /*!< suspend state interrupt flag (clear-only bit) */ +#define INTF_RSTIF BIT(10) /*!< reset interrupt flag (clear-only bit) */ +#define INTF_SOFIF BIT(9) /*!< start of frame interrupt flag (clear-only bit) */ +#define INTF_ESOFIF BIT(8) /*!< expected start of frame interrupt flag(clear-only bit) */ +#define INTF_L1REQ BIT(7) /*!< LPM L1 transaction is successfully received and acknowledged */ +#define INTF_DIR BIT(4) /*!< direction of transaction (read-only bit) */ +#define INTF_EPNUM BITS(0, 3) /*!< endpoint number (read-only bit) */ + +/* USBD_STAT */ +#define STAT_RXDP BIT(15) /*!< data plus line status */ +#define STAT_RXDM BIT(14) /*!< data minus line status */ +#define STAT_LOCK BIT(13) /*!< locked the USB */ +#define STAT_SOFLN BITS(11, 12) /*!< SOF lost number */ +#define STAT_FCNT BITS(0, 10) /*!< frame number count */ + +/* USBD_DADDR */ +#define DADDR_USBEN BIT(7) /*!< USB module enable */ +#define DADDR_USBDAR BITS(0, 6) /*!< USB device address */ + +/* USBD_EPxCS */ +#define EPxCS_RX_ST BIT(15) /*!< endpoint reception successful transferred */ +#define EPxCS_RX_DTG BIT(14) /*!< endpoint reception data PID toggle */ +#define EPxCS_RX_STA BITS(12, 13) /*!< endpoint reception status bits */ +#define EPxCS_SETUP BIT(11) /*!< endpoint setup transaction completed */ +#define EPxCS_CTL BITS(9, 10) /*!< endpoint type control */ +#define EPxCS_KCTL BIT(8) /*!< endpoint kind control */ +#define EPxCS_TX_ST BIT(7) /*!< endpoint transmission successful transfer */ +#define EPxCS_TX_DTG BIT(6) /*!< endpoint transmission data toggle */ +#define EPxCS_TX_STA BITS(4, 5) /*!< endpoint transmission transfers status bits */ +#define EPxCS_ADDR BITS(0, 3) /*!< endpoint address */ + +/* USBD_LPMCS */ +#define LPMCS_BLSTAT BITS(4, 7) /*!< bLinkState value */ +#define LPMCS_REMWK BIT(3) /*!< bRemoteWake value */ +#define LPMCS_LPMACK BIT(1) /*!< LPM token acknowledge enable */ +#define LPMCS_LPMEN BIT(0) /*!< LPM support enable */ + +/* constants definitions */ +/* endpoint control and status register mask (no toggle fields) */ +#define EPCS_MASK (EPxCS_RX_ST|EPxCS_SETUP|EPxCS_CTL|EPxCS_KCTL|EPxCS_TX_ST|EPxCS_ADDR) + +/* EPxCS_CTL[1:0] endpoint type control */ +#define ENDP_TYPE(regval) (EPxCS_CTL & ((regval) << 9U)) + +#define EP_BULK ENDP_TYPE(0U) /* bulk transfers */ +#define EP_CONTROL ENDP_TYPE(1U) /* control transfers */ +#define EP_ISO ENDP_TYPE(2U) /* isochronous transfers */ +#define EP_INTERRUPT ENDP_TYPE(3U) /* interrupt transfers */ +#define EP_CTL_MASK (~EPxCS_CTL & EPCS_MASK) + +/* endpoint kind control mask */ +#define EPKCTL_MASK (~EPxCS_KCTL & EPCS_MASK) + +/* EPxCS_TX_STA[1:0] status for tx transfer */ +#define ENDP_TXSTAT(regval) (EPxCS_TX_STA & ((regval) << 4U)) + +#define EPTX_DISABLED ENDP_TXSTAT(0U) /* transmission state is disabled */ +#define EPTX_STALL ENDP_TXSTAT(1U) /* transmission state is STALL */ +#define EPTX_NAK ENDP_TXSTAT(2U) /* transmission state is NAK */ +#define EPTX_VALID ENDP_TXSTAT(3U) /* transmission state is enabled */ +#define EPTX_DTGMASK (EPxCS_TX_STA | EPCS_MASK) + +/* EPxCS_RX_STA[1:0] status for rx transfer */ +#define ENDP_RXSTAT(regval) (EPxCS_RX_STA & ((regval) << 12U)) + +#define EPRX_DISABLED ENDP_RXSTAT(0U) /* reception state is disabled */ +#define EPRX_STALL ENDP_RXSTAT(1U) /* reception state is STALL */ +#define EPRX_NAK ENDP_RXSTAT(2U) /* reception state is NAK */ +#define EPRX_VALID ENDP_RXSTAT(3U) /* reception state is enabled */ +#define EPRX_DTGMASK (EPxCS_RX_STA | EPCS_MASK) + +/* endpoint receive/transmission counter register bit definitions */ +#define EPRCNT_BLKSIZ BIT(15) /* reception data block size */ +#define EPRCNT_BLKNUM BITS(10, 14) /* reception data block number */ +#define EPRCNT_CNT BITS(0, 9) /* reception data count */ + +#define EPTCNT_CNT BITS(0, 9) /* transmisson data count */ + +/* interrupt flag clear bits */ +#define CLR_STIF (~INTF_STIF) +#define CLR_PMOUIF (~INTF_PMOUIF) +#define CLR_ERRIF (~INTF_ERRIF) +#define CLR_WKUPIF (~INTF_WKUPIF) +#define CLR_SPSIF (~INTF_SPSIF) +#define CLR_RSTIF (~INTF_RSTIF) +#define CLR_SOFIF (~INTF_SOFIF) +#define CLR_ESOFIF (~INTF_ESOFIF) +#define CLR_L1REQ (~INTF_L1REQ) + +/* endpoint receive/transmission counter register bit offset */ +#define BLKSIZE_OFFSET (0x01U) +#define BLKNUM_OFFSET (0x05U) +#define RXCNT_OFFSET (0x0AU) + +#define TXCNT_OFFSET (0x0AU) + +#define BLKSIZE32_MASK (0x1fU) +#define BLKSIZE2_MASK (0x01U) + +#define BLKSIZE32_OFFSETMASK (0x05U) +#define BLKSIZE2_OFFSETMASK (0x01U) + +/* double buffer endpoint direction */ +typedef enum +{ + DBUF_EP_IN, /* double buffer IN direction */ + DBUF_EP_OUT, /* double buffer OUT direction */ + DBUF_EP_ERR, /* double buffer errer direction */ +}dbuf_ep_dir_enum; + +/* endpoints address */ +/* first bit is direction(0 for rx and 1 for tx) */ +#define EP0_OUT ((uint8_t)0x00) /* out endpoint 0 address */ +#define EP0_IN ((uint8_t)0x80) /* in endpoint 0 address */ +#define EP1_OUT ((uint8_t)0x01) /* out endpoint 1 address */ +#define EP1_IN ((uint8_t)0x81) /* in endpoint 1 address */ +#define EP2_OUT ((uint8_t)0x02) /* out endpoint 2 address */ +#define EP2_IN ((uint8_t)0x82) /* in endpoint 2 address */ +#define EP3_OUT ((uint8_t)0x03) /* out endpoint 3 address */ +#define EP3_IN ((uint8_t)0x83) /* in endpoint 3 address */ +#define EP4_OUT ((uint8_t)0x04) /* out endpoint 4 address */ +#define EP4_IN ((uint8_t)0x84) /* in endpoint 4 address */ +#define EP5_OUT ((uint8_t)0x05) /* out endpoint 5 address */ +#define EP5_IN ((uint8_t)0x85) /* in endpoint 5 address */ +#define EP6_OUT ((uint8_t)0x06) /* out endpoint 6 address */ +#define EP6_IN ((uint8_t)0x86) /* in endpoint 6 address */ +#define EP7_OUT ((uint8_t)0x07) /* out endpoint 7 address */ +#define EP7_IN ((uint8_t)0x87) /* in endpoint 7 address */ + +/* endpoints_identifier */ +#define EP0 ((uint8_t)0) /* endpoint 0 ID */ +#define EP1 ((uint8_t)1) /* endpoint 1 ID */ +#define EP2 ((uint8_t)2) /* endpoint 2 ID */ +#define EP3 ((uint8_t)3) /* endpoint 3 ID */ +#define EP4 ((uint8_t)4) /* endpoint 4 ID */ +#define EP5 ((uint8_t)5) /* endpoint 5 ID */ +#define EP6 ((uint8_t)6) /* endpoint 6 ID */ +#define EP7 ((uint8_t)7) /* endpoint 7 ID */ + +/* USBD operation macros */ + +/* set register value */ +#define USBD_REG_SET(reg, regvalue) ((reg) = (uint16_t)(regvalue)) + +/* get register value */ +#define USBD_REG_GET(reg) ((uint16_t)(reg)) + +#define _EP_ADDR_SET(ep_num, addr) USBD_REG_SET(USBD_EPxCS(ep_num), (USBD_REG_GET(USBD_EPxCS(ep_num)) & EPCS_MASK) | addr) + +/* tx or rx transfer status setting (bits EPTX_STA[1:0]) */ +#define USBD_ENDP_TX_STATUS_SET(ep_num, state) do {\ + register uint16_t _regval; \ + _regval = USBD_REG_GET(USBD_EPxCS(ep_num)) & (uint16_t)EPTX_DTGMASK;\ + USBD_REG_SET(USBD_EPxCS(ep_num), ((_regval) ^ (state))); \ +} while(0) + +#define USBD_ENDP_RX_STATUS_SET(ep_num, state) do {\ + register uint16_t _regval; \ + _regval = USBD_REG_GET(USBD_EPxCS(ep_num)) & (uint16_t)EPRX_DTGMASK;\ + USBD_REG_SET(USBD_EPxCS(ep_num), ((_regval) ^ (state))); \ +} while(0) + +/* tx or rx transfer status getting (bits EPxCS_RX_STA[1:0]) */ +#define USBD_ENDP_TX_STATUS_GET(ep_num) (USBD_REG_GET(USBD_EPxCS(ep_num)) & EPxCS_TX_STA) +#define USBD_ENDP_RX_STATUS_GET(ep_num) (USBD_REG_GET(USBD_EPxCS(ep_num)) & EPxCS_RX_STA) + +/* rx and tx transfer status setting (bits EPxCS_RX_STA[1:0] & EPxCS_TX_STA[1:0]) */ +#define USBD_ENDP_RX_TX_STATUS_SET(ep_num, state_rx, state_tx) do {\ + register uint16_t _regval; \ + _regval = USBD_REG_GET(USBD_EPxCS(ep_num)) & (uint16_t)(EPRX_DTGMASK | EPxCS_TX_STA) ;\ + USBD_REG_SET(USBD_EPxCS(ep_num), (((_regval) ^ (state_rx)) ^ (state_tx))); \ +} while(0) + +/* set and clear endpoint kind (bit EPxCS_KCTL) */ +#define USBD_ENDP_KIND_SET(ep_num) (USBD_REG_SET(USBD_EPxCS(ep_num), ((USBD_REG_GET(USBD_EPxCS(ep_num)) | EPxCS_KCTL) & EPCS_MASK))) +#define USBD_ENDP_KIND_CLEAR(ep_num) (USBD_REG_SET(USBD_EPxCS(ep_num), (USBD_REG_GET(USBD_EPxCS(ep_num)) & EPKCTL_MASK))) + +/* set and clear directly STATUS_OUT state of endpoint */ +#define USBD_STATUS_OUT_SET(ep_num) USBD_ENDP_KIND_SET(ep_num) +#define USBD_STATUS_OUT_CLEAR(ep_num) USBD_ENDP_KIND_CLEAR(ep_num) + +/* clear bit EPxCS_RX_ST/EPxCS_TX_ST in the endpoint control and status register */ +#define USBD_ENDP_RX_STAT_CLEAR(ep_num) (USBD_REG_SET(USBD_EPxCS(ep_num), USBD_REG_GET(USBD_EPxCS(ep_num)) & 0x7FFFU & (uint16_t)EPCS_MASK)) +#define USBD_ENDP_TX_STAT_CLEAR(ep_num) (USBD_REG_SET(USBD_EPxCS(ep_num), USBD_REG_GET(USBD_EPxCS(ep_num)) & 0xFF7FU & (uint16_t)EPCS_MASK)) + +/* toggle EPxCS_RX_DTG or EPxCS_TX_DTG bit in the endpoint control and status register */ +#define USBD_DTG_RX_TOGGLE(ep_num) (USBD_REG_SET(USBD_EPxCS(ep_num), EPxCS_RX_DTG | (USBD_REG_GET(USBD_EPxCS(ep_num)) & EPCS_MASK))) +#define USBD_DTG_TX_TOGGLE(ep_num) (USBD_REG_SET(USBD_EPxCS(ep_num), EPxCS_TX_DTG | (USBD_REG_GET(USBD_EPxCS(ep_num)) & EPCS_MASK))) + +/* clear EPxCS_RX_DTG or EPxCS_TX_DTG bit in the endpoint control and status register */ +#define USBD_DTG_RX_CLEAR(ep_num) do {\ + if ((USBD_REG_GET(USBD_EPxCS(ep_num)) & EPxCS_RX_DTG) != 0U) {\ + USBD_DTG_RX_TOGGLE(ep_num);\ + } else {\ + }\ +} while(0) + +#define USBD_DTG_TX_CLEAR(ep_num) do {\ + if ((USBD_REG_GET(USBD_EPxCS(ep_num)) & EPxCS_TX_DTG) != 0U) {\ + USBD_DTG_TX_TOGGLE(ep_num);\ + } else {\ + }\ +} while(0) + +/* set and clear directly double buffered feature of endpoint */ +#define USBD_ENDP_DOUBLE_BUF_SET(ep_num) USBD_ENDP_KIND_SET(ep_num) +#define USBD_ENDP_DOUBLE_BUF_CLEAR(ep_num) USBD_ENDP_KIND_CLEAR(ep_num) + +/* toggle SW_BUF bit in the double buffered endpoint */ +#define USBD_SWBUF_TX_TOGGLE(ep_num) USBD_DTG_RX_TOGGLE(ep_num) +#define USBD_SWBUF_RX_TOGGLE(ep_num) USBD_DTG_TX_TOGGLE(ep_num) + +#endif /* USBD_REGS_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_std.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_std.h new file mode 100644 index 0000000000000000000000000000000000000000..58a85d6cfce3362edff8d7241020667d99a5494e --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Include/usbd_std.h @@ -0,0 +1,221 @@ +/*! + \file usbd_std.h + \brief USB standard definitions + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_STD_H +#define USBD_STD_H + +#include "usbd_core.h" +#include + +#ifndef NULL +#define NULL 0U +#endif + +/* constants definitions */ +#define USB_DEV_QUALIFIER_DESC_LEN 0x0AU /* device qualifier descriptor length */ +#define USB_CFG_DESC_LEN 0x09U /* configuration descriptor length */ + +#define USBD_LANGID_STR_IDX 0x00U /* language ID string index */ +#define USBD_MFC_STR_IDX 0x01U /* manufacturer string index */ +#define USBD_PRODUCT_STR_IDX 0x02U /* product string index */ +#define USBD_SERIAL_STR_IDX 0x03U /* serial string index */ +#define USBD_CONFIG_STR_IDX 0x04U /* configuration string index */ +#define USBD_INTERFACE_STR_IDX 0x05U /* interface string index */ + +#define USB_STANDARD_REQ 0x00U /* standard request */ +#define USB_CLASS_REQ 0x20U /* device class request */ +#define USB_VENDOR_REQ 0x40U /* vendor request */ +#define USB_REQ_MASK 0x60U /* request type mask */ + +#define USB_REQTYPE_DEVICE 0x00U /* request recipient is device */ +#define USB_REQTYPE_INTERFACE 0x01U /* request recipient is interface */ +#define USB_REQTYPE_ENDPOINT 0x02U /* request recipient is endpoint */ +#define USB_REQ_RECIPIENT_MASK 0x1fU /* request recipient mask */ + +#define USBREQ_GET_STATUS 0x00U /* Get_Status standard requeset */ +#define USBREQ_CLEAR_FEATURE 0x01U /* Clear_Feature standard requeset */ +#define USBREQ_SET_FEATURE 0x03U /* Set_Feature standard requeset */ +#define USBREQ_SET_ADDRESS 0x05U /* Set_Address standard requeset */ +#define USBREQ_GET_DESCRIPTOR 0x06U /* Get_Descriptor standard requeset */ +#define USBREQ_GET_CONFIGURATION 0x08U /* Get_Configuration standard requeset */ +#define USBREQ_SET_CONFIGURATION 0x09U /* Set_Configuration standard requeset */ +#define USBREQ_GET_INTERFACE 0x0AU /* Get_Interface standard requeset */ +#define USBREQ_SET_INTERFACE 0x0BU /* Set_Interface standard requeset */ + +#define USB_DESCTYPE_DEVICE 0x01U /* device descriptor type */ +#define USB_DESCTYPE_CONFIGURATION 0x02U /* configuration descriptor type */ +#define USB_DESCTYPE_STRING 0x03U /* string descriptor type */ +#define USB_DESCTYPE_INTERFACE 0x04U /* interface descriptor type */ +#define USB_DESCTYPE_ENDPOINT 0x05U /* endpoint descriptor type */ +#define USB_DESCTYPE_DEVICE_QUALIFIER 0x06U /* device qualifier descriptor type */ +#define USB_DESCTYPE_OTHER_SPEED_CONFIGURATION 0x07U /* other speed configuration descriptor type */ +#define USB_DESCTYPE_BOS 0x0FU /* BOS descriptor type */ + +#define USB_STATUS_REMOTE_WAKEUP 2U /* USB is in remote wakeup status */ +#define USB_STATUS_SELF_POWERED 1U /* USB is in self powered status */ + +#define USB_FEATURE_ENDP_HALT 0U /* USB has endpoint halt feature */ +#define USB_FEATURE_REMOTE_WAKEUP 1U /* USB has endpoint remote wakeup feature */ +#define USB_FEATURE_TEST_MODE 2U /* USB has endpoint test mode feature */ + +#define ENG_LANGID 0x0409U /* english language ID */ +#define CHN_LANGID 0x0804U /* chinese language ID */ + +#define USB_EPTYPE_MASK 0x03U + +#define USB_DEVICE_DESC_SIZE 0x12U + +/* USB device exported macros */ +#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \ + (uint16_t)(((uint16_t)(*(((uint8_t *)(addr)) + 1U))) << 8U)) + +#define LOWBYTE(x) ((uint8_t)((x) & 0x00FFU)) +#define HIGHBYTE(x) ((uint8_t)(((x) & 0xFF00U) >> 8U)) + +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) + +#define IS_NOT_EP0(ep_addr) (((ep_addr) != 0x00U) && ((ep_addr) != 0x80U)) + +#define WIDE_STRING(string) _WIDE_STRING(string) +#define _WIDE_STRING(string) L##string + +#define USBD_STRING_DESC(string) \ + (void *)&(const struct { \ + uint8_t _len; \ + uint8_t _type; \ + wchar_t _data[sizeof(string)]; \ + }) { \ + sizeof(WIDE_STRING(string)) + 2U - 2U, \ + USB_DESCTYPE_STRING, \ + WIDE_STRING(string) \ + } + +typedef struct +{ + uint8_t bLength; /*!< size of the descriptor */ + uint8_t bDescriptorType; /*!< type of the descriptor */ +} usb_descriptor_header_struct; + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */ + + uint16_t bcdUSB; /*!< BCD of the supported USB specification */ + uint8_t bDeviceClass; /*!< USB device class */ + uint8_t bDeviceSubClass; /*!< USB device subclass */ + uint8_t bDeviceProtocol; /*!< USB device protocol */ + uint8_t bMaxPacketSize0; /*!< size of the control (address 0) endpoint's bank in bytes */ + uint16_t idVendor; /*!< vendor ID for the USB product */ + uint16_t idProduct; /*!< unique product ID for the USB product */ + uint16_t bcdDevice; /*!< product release (version) number */ + uint8_t iManufacturer; /*!< string index for the manufacturer's name */ + uint8_t iProduct; /*!< string index for the product name/details */ + uint8_t iSerialNumber; /*!< string index for the product's globally unique hexadecimal serial number */ + uint8_t bNumberConfigurations; /*!< total number of configurations supported by the device */ +} usb_descriptor_device_struct; + +#pragma pack(1) + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */ + + uint16_t wTotalLength; /*!< size of the configuration descriptor header,and all sub descriptors inside the configuration */ + uint8_t bNumInterfaces; /*!< total number of interfaces in the configuration */ + uint8_t bConfigurationValue; /*!< configuration index of the current configuration */ + uint8_t iConfiguration; /*!< index of a string descriptor describing the configuration */ + uint8_t bmAttributes; /*!< configuration attributes */ + uint8_t bMaxPower; /*!< maximum power consumption of the device while in the current configuration */ +} usb_descriptor_configuration_struct; + +#pragma pack() + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */ + + uint8_t bInterfaceNumber; /*!< index of the interface in the current configuration */ + uint8_t bAlternateSetting; /*!< alternate setting for the interface number */ + uint8_t bNumEndpoints; /*!< total number of endpoints in the interface */ + uint8_t bInterfaceClass; /*!< interface class ID */ + uint8_t bInterfaceSubClass; /*!< interface subclass ID */ + uint8_t bInterfaceProtocol; /*!< interface protocol ID */ + uint8_t iInterface; /*!< index of the string descriptor describing the interface */ +} usb_descriptor_interface_struct; + +#pragma pack(1) + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size. */ + + uint8_t bEndpointAddress; /*!< logical address of the endpoint */ + uint8_t bmAttributes; /*!< endpoint attributes */ + uint16_t wMaxPacketSize; /*!< size of the endpoint bank, in bytes */ + uint8_t bInterval; /*!< polling interval in milliseconds for the endpoint if it is an INTERRUPT or ISOCHRONOUS type */ +} usb_descriptor_endpoint_struct; + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size. */ + uint16_t wLANGID; /*!< LANGID code */ +}usb_descriptor_language_id_struct; + +#pragma pack() + +/* function declarations */ +/* USB setup transaction processing */ +uint8_t usbd_setup_transaction (usbd_core_handle_struct *pudev); +/* USB out transaction processing */ +uint8_t usbd_out_transaction (usbd_core_handle_struct *pudev, uint8_t ep_num); +/* USB in transaction processing */ +uint8_t usbd_in_transaction (usbd_core_handle_struct *pudev, uint8_t ep_num); + +/* handle USB standard device request */ +uint8_t usbd_standard_request (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +/* handle device class request */ +uint8_t usbd_device_class_request (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +/* handle USB vendor request */ +uint8_t usbd_vendor_request (usbd_core_handle_struct *pudev, usb_device_req_struct *req); + +/* decode setup data packet */ +void usbd_setup_request_parse (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +/* handle USB enumeration error event */ +void usbd_enum_error (usbd_core_handle_struct *pudev, usb_device_req_struct *req); + +#endif /* USBD_STD_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_core.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_core.c new file mode 100644 index 0000000000000000000000000000000000000000..4af7b0346934aff39e49364cb3d149ba3f51e0b1 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_core.c @@ -0,0 +1,455 @@ +/*! + \file usbd_core.c + \brief USB device driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbd_core.h" +#include "usbd_std.h" + +uint32_t g_interrupt_mask = 0U; +uint32_t g_free_buf_addr = ENDP_BUF_ADDR; + +usbd_ep_buf_struct *pbuf_reg = (usbd_ep_buf_struct *)USBD_RAM; + +/*! + \brief device core register initialization + \param[in] none + \param[out] none + \retval none +*/ +void usbd_core_init (usbd_core_handle_struct *pudev) +{ + /* disable remote wakeup feature */ + pudev->remote_wakeup = 0U; + + /* just reset the CLOSE bit */ + USBD_REG_SET(USBD_CTL, CTL_SETRST); + + /* may be need wait some time(tSTARTUP) ... */ + + /* clear SETRST bit in USBD_CTL register */ + USBD_REG_SET(USBD_CTL, 0U); + + /* clear all pending interrupts */ + USBD_REG_SET(USBD_INTF, 0U); + + /* set allocation buffer address */ + USBD_REG_SET(USBD_BADDR, BUFFER_ADDRESS & 0xFFF8U); + + g_interrupt_mask = IER_MASK; + +#ifdef LPM_ENABLED + /* enable L1REQ interrupt */ + USBD_REG_SET(USBD_LPMCS, LPMCS_LPMACK | LPMCS_LPMEN); +#endif /* LPM_ENABLED */ + + /* enable all interrupts mask bits */ + USBD_REG_SET(USBD_CTL, g_interrupt_mask); +} + +/*! + \brief free buffer used from application by toggling the SW_BUF byte + \param[in] ep_num: endpoint identifier (0..7) + \param[in] dir: endpoint direction which can be OUT(0) or IN(1) + \param[out] none + \retval None +*/ +void user_buffer_free (uint8_t ep_num, uint8_t dir) +{ + if (DBUF_EP_OUT == dir) { + USBD_SWBUF_RX_TOGGLE(ep_num); + } else if (DBUF_EP_IN == dir) { + USBD_SWBUF_TX_TOGGLE(ep_num); + } else { + /* no operation */ + } +} + +/*! + \brief device core register configure when stop device + \param[in] none + \param[out] none + \retval none +*/ +void usbd_core_deinit (void) +{ + /* disable all interrupts and set USB reset */ + USBD_REG_SET(USBD_CTL, CTL_SETRST); + + /* clear all interrupt flags */ + USBD_REG_SET(USBD_INTF, 0U); + + /* close device */ + USBD_REG_SET(USBD_CTL, CTL_SETRST | CTL_CLOSE); +} + +/*! + \brief endpoint initialization + \param[in] pudev: pointer to USB core instance + \param[in] buf_kind: kind of buffer + \param[in] pep_desc: pointer to endpoint descriptor + \param[out] none + \retval none +*/ +void usbd_ep_init (usbd_core_handle_struct *pudev, usbd_epkind_enum buf_kind, void *ep_desc) +{ + usb_descriptor_endpoint_struct *desc_ep = (usb_descriptor_endpoint_struct *)ep_desc; + + uint8_t ep_num = desc_ep->bEndpointAddress & 0x0FU; + uint32_t reg_value = 0; + + /* set the endpoint type */ + switch (desc_ep->bmAttributes & USB_EPTYPE_MASK) { + case ENDP_CONTROL: + reg_value = EP_CONTROL; + break; + case ENDP_BULK: + reg_value = EP_BULK; + break; + case ENDP_INT: + reg_value = EP_INTERRUPT; + break; + case ENDP_ISOC: + reg_value = EP_ISO; + break; + default: + break; + } + + USBD_REG_SET(USBD_EPxCS(ep_num), reg_value | ep_num); + + reg_value = desc_ep->wMaxPacketSize; + + if (desc_ep->bEndpointAddress >> 7U) { + usb_ep_struct *ep = &pudev->in_ep[ep_num]; + + ep->maxpacket = reg_value; + + /* set the endpoint transmit buffer address */ + (pbuf_reg + ep_num)->tx_addr = (uint16_t)g_free_buf_addr; + + reg_value = (reg_value + 1U) & ~1U; + + g_free_buf_addr += reg_value; + + if (ENDP_DBL_BUF == buf_kind) { + USBD_ENDP_DOUBLE_BUF_SET(ep_num); + + (pbuf_reg + ep_num)->rx_addr = (uint16_t)g_free_buf_addr; + + g_free_buf_addr += reg_value; + + USBD_ENDP_TX_STATUS_SET(ep_num, EPTX_VALID); + USBD_ENDP_RX_STATUS_SET(ep_num, EPRX_DISABLED); + } else { + /* configure the endpoint status as NAK status */ + USBD_ENDP_TX_STATUS_SET(ep_num, EPTX_NAK); + } + } else { + usb_ep_struct *ep = &pudev->out_ep[ep_num]; + + ep->maxpacket = reg_value; + + if (ENDP_DBL_BUF == buf_kind) { + USBD_ENDP_DOUBLE_BUF_SET(ep_num); + + USBD_DTG_TX_TOGGLE(ep_num); + + /* set the endpoint transmit buffer address */ + (pbuf_reg + ep_num)->tx_addr = (uint16_t)g_free_buf_addr; + + if (reg_value > 62U) { + reg_value = (reg_value + 31U) & ~31U; + (pbuf_reg + ep_num)->tx_count = (uint16_t)(((reg_value << 5U) - 1U) | 0x8000U); + } else { + reg_value = (reg_value + 1U) & ~1U; + (pbuf_reg + ep_num)->tx_count = (uint16_t)(reg_value << 9U); + } + + g_free_buf_addr += reg_value; + } + + reg_value = desc_ep->wMaxPacketSize; + + /* set the endpoint receive buffer address */ + (pbuf_reg + ep_num)->rx_addr = (uint16_t)g_free_buf_addr; + + if (reg_value > 62U) { + reg_value = (reg_value + 31U) & ~31U; + (pbuf_reg + ep_num)->rx_count = (uint16_t)(((reg_value << 5U) - 1U) | 0x8000U); + } else { + reg_value = (reg_value + 1U) & ~1U; + (pbuf_reg + ep_num)->rx_count = (uint16_t)(reg_value << 9U); + } + + if (ENDP_DBL_BUF == buf_kind) { + USBD_ENDP_RX_STATUS_SET(ep_num, EPRX_DISABLED); + USBD_ENDP_TX_STATUS_SET(ep_num, EPTX_NAK); + } else { + /* configure the endpoint status as NAK status */ + USBD_ENDP_RX_STATUS_SET(ep_num, EPRX_NAK); + } + } +} + +/*! + \brief configure the endpoint when it is disabled + \param[in] pudev: pointer to USB core instance + \param[in] ep_addr: endpoint address + in this parameter: + bit0..bit6: endpoint number (0..7) + bit7: endpoint direction which can be IN(1) or OUT(0) + \param[out] none + \retval none +*/ +void usbd_ep_deinit (usbd_core_handle_struct *pudev, uint8_t ep_addr) +{ + uint8_t ep_num = ep_addr & 0x7F; + + if (ep_addr >> 7) { + USBD_DTG_TX_CLEAR(ep_num); + + /* configure the endpoint status as DISABLED */ + USBD_ENDP_TX_STATUS_SET(ep_num, EPTX_DISABLED); + } else { + USBD_DTG_RX_CLEAR(ep_num); + + /* configure the endpoint status as DISABLED */ + USBD_ENDP_RX_STATUS_SET(ep_num, EPRX_DISABLED); + } +} + +/*! + \brief endpoint prepare to receive data + \param[in] pudev: pointer to usb core instance + \param[in] ep_addr: endpoint address + in this parameter: + bit0..bit6: endpoint number (0..7) + bit7: endpoint direction which can be IN(1) or OUT(0) + \param[in] pbuf: user buffer address pointer + \param[in] buf_len: buffer length + \param[out] none + \retval none +*/ +void usbd_ep_rx (usbd_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint16_t buf_len) +{ + usb_ep_struct *ep; + uint8_t ep_num = ep_addr & 0x7FU; + + ep = &pudev->out_ep[ep_num]; + + /* configure the transaction level parameters */ + ep->trs_buf = pbuf; + ep->trs_len = buf_len; + + /* enable endpoint to receive */ + USBD_ENDP_RX_STATUS_SET(ep_num, EPRX_VALID); +} + +/*! + \brief endpoint prepare to transmit data + \param[in] pudev: pointer to USB core instance + \param[in] ep_addr: endpoint address + in this parameter: + bit0..bit6: endpoint number (0..7) + bit7: endpoint direction which can be IN(1) or OUT(0) + \param[in] pbuf: transmit buffer address pointer + \param[in] buf_len: buffer length + \param[out] none + \retval none +*/ +void usbd_ep_tx (usbd_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint16_t buf_len) +{ + __IO uint32_t len = 0U; + uint8_t ep_num = ep_addr & 0x7FU; + usb_ep_struct *ep = &pudev->in_ep[ep_num]; + + /* configure the transaction level parameters */ + ep->trs_buf = pbuf; + ep->trs_len = buf_len; + ep->trs_count = 0U; + + /* transmit length is more than one packet */ + if (ep->trs_len > ep->maxpacket) { + len = ep->maxpacket; + } else { + len = ep->trs_len; + } + + usbd_ep_data_write(ep->trs_buf, (pbuf_reg + ep_num)->tx_addr, (uint16_t)len); + (pbuf_reg + ep_num)->tx_count = (uint16_t)len; + + /* enable endpoint to transmit */ + USBD_ENDP_TX_STATUS_SET(ep_num, EPTX_VALID); +} + +/*! + \brief set an endpoint to stall status + \param[in] pudev: pointer to usb core instance + \param[in] ep_addr: endpoint address + in this parameter: + bit0..bit6: endpoint number (0..7) + bit7: endpoint direction which can be IN(1) or OUT(0) + \param[out] none + \retval none +*/ +void usbd_ep_stall (usbd_core_handle_struct *pudev, uint8_t ep_addr) +{ + uint8_t ep_num = ep_addr & 0x7FU; + usb_ep_struct *ep; + + if (ep_addr >> 7U) { + ep = &pudev->in_ep[ep_num]; + + USBD_ENDP_TX_STATUS_SET(ep_num, EPTX_STALL); + } else { + ep = &pudev->out_ep[ep_num]; + + USBD_ENDP_RX_STATUS_SET(ep_num, EPRX_STALL); + } + + ep->stall = 1U; + + if (0U == ep_num) { + /* control endpoint need to be stalled in two directions */ + USBD_ENDP_RX_TX_STATUS_SET(ep_num, EPRX_STALL, EPTX_STALL); + } +} + +/*! + \brief clear endpoint stalled status + \param[in] pudev: pointer to usb core instance + \param[in] ep_addr: endpoint address + in this parameter: + bit0..bit6: endpoint number (0..7) + bit7: endpoint direction which can be IN(1) or OUT(0) + \param[out] none + \retval none +*/ +void usbd_ep_clear_stall (usbd_core_handle_struct *pudev, uint8_t ep_addr) +{ + uint8_t ep_num = ep_addr & 0x7FU; + usb_ep_struct *ep; + + if (ep_addr >> 7U) { + ep = &pudev->in_ep[ep_num]; + + /* clear endpoint data toggle bit */ + USBD_DTG_TX_CLEAR(ep_num); + + /* clear endpoint stall status */ + USBD_ENDP_TX_STATUS_SET(ep_num, EPTX_VALID); + } else { + ep = &pudev->out_ep[ep_num]; + + /* clear endpoint data toggle bit */ + USBD_DTG_RX_CLEAR(ep_num); + + /* clear endpoint stall status */ + USBD_ENDP_RX_STATUS_SET(ep_num, EPRX_VALID); + } + + ep->stall = 0U; +} + +/*! + \brief get the endpoint status + \param[in] pudev: pointer to usb core instance + \param[in] ep_addr: endpoint address + in this parameter: + bit0..bit6: endpoint number (0..7) + bit7: endpoint direction which can be IN(1) or OUT(0) + \param[out] none + \retval endpoint status +*/ +uint8_t usbd_ep_status_get (usbd_core_handle_struct *pudev, uint8_t ep_addr) +{ + if (ep_addr >> 7U) { + return (uint8_t)USBD_ENDP_TX_STATUS_GET((ep_addr & 0x7FU)); + } else { + return (uint8_t)USBD_ENDP_RX_STATUS_GET(ep_addr); + } +} + +/*! + \brief write datas from user fifo to USBRAM + \param[in] user_fifo: pointer to user fifo + \param[in] usbram_addr: the allocation buffer address of the endpoint + \param[in] bytes: the bytes count of the write datas + \param[out] none + \retval none +*/ +void usbd_ep_data_write(uint8_t *user_fifo, uint16_t usbram_addr, uint16_t bytes) +{ + uint32_t n; + uint32_t *write_addr = (uint32_t *)((uint32_t)(usbram_addr * 2U + USBD_RAM)); + + for (n = 0U; n < (bytes + 1U) / 2U; n++) { + *write_addr++ = *((__packed uint16_t*)user_fifo); + user_fifo += 2U; + } +} + +/*! + \brief read datas from USBRAM to user fifo + \param[in] user_fifo: pointer to user fifo + \param[in] usbram_addr: the allocation buffer address of the endpoint + \param[in] bytes: the bytes count of the read datas + \param[out] none + \retval none +*/ +void usbd_ep_data_read(uint8_t *user_fifo, uint16_t usbram_addr, uint16_t bytes) +{ + uint32_t n; + uint32_t *read_addr = (uint32_t *)((uint32_t)(usbram_addr * 2U + USBD_RAM)); + + for (n = 0U; n < (bytes + 1U) / 2U; n++) { + *((__packed uint16_t*)user_fifo) = (uint16_t)*read_addr++; + user_fifo += 2U; + } +} + +/*! + \brief get the received data length + \param[in] pudev: pointer to USB core instance + \param[in] ep_num: endpoint identifier which is in (0..7) + \param[out] none + \retval received data length +*/ +uint16_t usbd_rx_count_get (usbd_core_handle_struct *pudev, uint8_t ep_num) +{ + return (uint16_t)pudev->out_ep[ep_num].trs_count; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_int.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_int.c new file mode 100644 index 0000000000000000000000000000000000000000..f9e58fe3d95d729b631e37f64700c0bff2adb827 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_int.c @@ -0,0 +1,458 @@ +/*! + \file usbd_int.c + \brief USB device power interrupt routines + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbd_int.h" + +extern uint32_t g_interrupt_mask; +extern __IO uint8_t g_suspend_enabled; +extern __IO uint8_t g_remote_wakeup_on; +extern __IO uint8_t g_ESOF_count; + +#ifdef LPM_ENABLED +__IO uint32_t L1_remote_wakeup = 0U; +__IO uint32_t L1_resume = 0U; +__IO uint32_t besl = 0U; +#endif /* LPM_ENABLED */ + +static uint8_t usbd_intf_lpst (usbd_core_handle_struct *pudev); +static uint8_t usbd_intf_sof (usbd_core_handle_struct *pudev); +static uint8_t usbd_intf_esof (usbd_core_handle_struct *pudev); +static uint8_t usbd_intf_reset (usbd_core_handle_struct *pudev); +static uint8_t usbd_intf_suspend (usbd_core_handle_struct *pudev); +static uint8_t usbd_intf_wakeup (usbd_core_handle_struct *pudev); + +/*! + \brief USB interrupt events service routine + \param[in] none + \param[out] none + \retval none +*/ +void usbd_isr (void) +{ + __IO uint16_t interrupt_flag = 0U; + __IO uint16_t ctlr = 0U; + + interrupt_flag = USBD_REG_GET(USBD_INTF); + + if (g_interrupt_mask & INTF_STIF & interrupt_flag) { + /* the endpoint successful transfer interrupt service */ + usbd_intf_lpst(&usb_device_dev); + } + + if (g_interrupt_mask & INTF_WKUPIF & interrupt_flag) { + /* clear wakeup interrupt flag in INTF */ + USBD_REG_SET(USBD_INTF, (uint16_t)CLR_WKUPIF); + + /* USB wakeup interrupt handle */ + usbd_intf_wakeup(&usb_device_dev); + +#ifdef LPM_ENABLED + /* clear L1 remote wakeup flag */ + L1_remote_wakeup = 0; +#endif /* LPM_ENABLED */ + } + + if (g_interrupt_mask & INTF_SPSIF & interrupt_flag) { + if(!(USBD_REG_GET(USBD_CTL) & CTL_RSREQ)) { + /* process library core layer suspend routine*/ + usbd_intf_suspend(&usb_device_dev); + + /* clear of suspend interrupt flag bit must be done after setting of CTLR_SETSPS */ + USBD_REG_SET(USBD_INTF, (uint16_t)CLR_SPSIF); + } + } + + if (g_interrupt_mask & INTF_SOFIF & interrupt_flag) { + /* clear SOF interrupt flag in INTF */ + USBD_REG_SET(USBD_INTF, (uint16_t)CLR_SOFIF); + + /* USB SOF interrupt handle */ + usbd_intf_sof(&usb_device_dev); + } + + if (g_interrupt_mask & INTF_ESOFIF & interrupt_flag) { + /* clear ESOF interrupt flag in INTF */ + USBD_REG_SET(USBD_INTF, (uint16_t)CLR_ESOFIF); + + /* USB ESOF interrupt handle */ + usbd_intf_esof(&usb_device_dev); + } + + if (g_interrupt_mask & INTF_RSTIF & interrupt_flag) { + /* clear reset interrupt flag in INTF */ + USBD_REG_SET(USBD_INTF, (uint16_t)CLR_RSTIF); + + /* USB reset interrupt handle */ + usbd_intf_reset(&usb_device_dev); + } + +#ifdef LPM_ENABLED + if (g_interrupt_mask & INTF_L1REQ & interrupt_flag) { + /* clear L1 ST bit in LPM INTF */ + USBD_REG_SET(USBD_INTF, CLR_L1REQ); + + /* read BESL field from subendpoint0 register which coressponds to HIRD parameter in LPM spec */ + besl = (USBD_REG_GET(USBD_LPMCS) & LPMCS_BLSTAT) >> 4; + + /* read BREMOTEWAKE bit from subendpoint0 register which corresponding to bRemoteWake bit in LPM request */ + L1_remote_wakeup = (USBD_REG_GET(USBD_LPMCS) & LPMCS_REMWK) >> 8; + + /* process USB device core layer suspend routine */ + /* enter USB model in suspend and system in low power mode (DEEP_SLEEP mode) */ + usbd_intf_suspend(&usb_device_dev); + } +#endif /* LPM_ENABLED */ +} + +/*! + \brief handle USB high priority successful transfer event + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +uint8_t usbd_intf_hpst (usbd_core_handle_struct *pudev) +{ + uint8_t ep_num = 0U; + + __IO uint16_t int_status = 0U; + __IO uint16_t ep_value = 0U; + + usb_ep_struct *ep = NULL; + + /* wait till interrupts are not pending */ + while (0U != ((int_status = USBD_INTF) & (uint16_t)INTF_STIF)) { + /* get endpoint number and the value of control and state register */ + ep_num = (uint8_t)(int_status & INTF_EPNUM); + ep_value = USBD_EPxCS(ep_num); + + if (0U == (int_status & INTF_DIR)) { + /* handle the in direction transaction */ + + ep = &(pudev->in_ep[ep_num]); + + if (0U != (ep_value & EPxCS_TX_ST)) { + /* clear successful transmit interrupt flag */ + USBD_ENDP_TX_STAT_CLEAR(ep_num); + + if (ep_value & EPxCS_TX_DTG) { + /* just handle single buffer situation */ + ep->trs_count = (pbuf_reg + ep_num)->tx_count & EPTCNT_CNT; + } + + /* maybe mutiple packets */ + ep->trs_buf += ep->trs_count; + + usbd_in_transaction(pudev, ep_num); + } + } else { + /* handle the out direction transaction */ + + uint16_t count = 0U; + + ep = &(pudev->out_ep[ep_num]); + + if (0U != (ep_value & EPxCS_RX_ST)) { + /* clear successful receive interrupt flag */ + USBD_ENDP_RX_STAT_CLEAR(ep_num); + + if (ep_value & EPxCS_TX_DTG) { + count = (pbuf_reg + ep_num)->tx_count & (uint16_t)EPRCNT_CNT; + + if (0U != count) { + usbd_ep_data_read(ep->trs_buf, (pbuf_reg + ep_num)->tx_addr, count); + } + } else { + count = (pbuf_reg + ep_num)->rx_count & (uint16_t)EPRCNT_CNT; + + if (0U != count) { + usbd_ep_data_read(ep->trs_buf, (pbuf_reg + ep_num)->rx_addr, count); + } + } + + user_buffer_free(ep_num, DBUF_EP_OUT); + + /* maybe mutiple packets */ + ep->trs_count += count; + ep->trs_buf += count; + ep->trs_len -= count; + + if ((0U == ep->trs_len) || (count < ep->maxpacket)) { + USBD_ENDP_TX_STATUS_SET(ep_num, EPRX_NAK); + + /* enter data OUT status */ + usbd_out_transaction(pudev, ep_num); + + ep->trs_count = 0U; + } + } + } + } + + return USBD_OK; +} + +/*! + \brief handle USB low priority successful transfer event + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +static uint8_t usbd_intf_lpst (usbd_core_handle_struct *pudev) +{ + uint8_t ep_num = 0U; + + __IO uint16_t int_status = 0U; + __IO uint16_t ep_value = 0U; + + usb_ep_struct *ep = NULL; + + /* wait till interrupts are not pending */ + while (0U != ((int_status = USBD_REG_GET(USBD_INTF)) & (uint16_t)INTF_STIF)) { + /* get endpoint number and the value of control and state register */ + ep_num = (uint8_t)(int_status & INTF_EPNUM); + ep_value = USBD_REG_GET(USBD_EPxCS(ep_num)); + + if (0U == (int_status & INTF_DIR)) { + /* handle the in direction transaction */ + + ep = &(pudev->in_ep[ep_num]); + + if (0U != (ep_value & EPxCS_TX_ST)) { + /* clear successful transmit interrupt flag */ + USBD_ENDP_TX_STAT_CLEAR(ep_num); + + /* just handle single buffer situation */ + ep->trs_count = (pbuf_reg + ep_num)->tx_count & EPTCNT_CNT; + + /* maybe mutiple packets */ + ep->trs_buf += ep->trs_count; + + usbd_in_transaction(pudev, ep_num); + } + } else { + /* handle the out direction transaction */ + + uint16_t count = 0U; + + ep = &(pudev->out_ep[ep_num]); + + if (0U != (ep_value & EPxCS_RX_ST)) { + /* clear successful receive interrupt flag */ + USBD_ENDP_RX_STAT_CLEAR(ep_num); + + count = (pbuf_reg + ep_num)->rx_count & (uint16_t)EPRCNT_CNT; + + if (0U != count) { + if (0U != (ep_value & EPxCS_SETUP)) { + /* handle setup packet */ + usbd_ep_data_read(&(pudev->setup_packet[0]), pbuf_reg->rx_addr, count); + + /* enter setup status */ + usbd_setup_transaction(pudev); + + return USBD_OK; + } else { + usbd_ep_data_read(ep->trs_buf, (pbuf_reg + ep_num)->rx_addr, count); + } + } + + /* maybe mutiple packets */ + ep->trs_count += count; + ep->trs_buf += count; + ep->trs_len -= count; + + if ((0U == ep->trs_len) || (count < ep->maxpacket)) { + /* enter data OUT status */ + usbd_out_transaction(pudev, ep_num); + + ep->trs_count = 0U; + } else { + usbd_ep_rx(pudev, ep_num, ep->trs_buf, (uint16_t)ep->trs_len); + } + } + } + } + + return USBD_OK; +} + +/*! + \brief handle USB SOF event + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +static uint8_t usbd_intf_sof (usbd_core_handle_struct *pudev) +{ + /* if necessary, user can add code here */ + if (NULL != usbd_int_fops) { + usbd_int_fops->SOF(pudev); + } + + return USBD_OK; +} + +/*! + \brief handle USB expect SOF event + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +static uint8_t usbd_intf_esof (usbd_core_handle_struct *pudev) +{ + /* control resume time by ESOFs */ + if (g_ESOF_count > 0U) { + g_ESOF_count--; + + if (0U == g_ESOF_count) { + if (1U == g_remote_wakeup_on) { + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) & ~CTL_RSREQ); + + g_remote_wakeup_on = 0U; + } else { + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) | CTL_RSREQ); + + g_ESOF_count = 3U; + g_remote_wakeup_on = 1U; + } + } + } + + return USBD_OK; +} + +/*! + \brief handle USB reset event + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +static uint8_t usbd_intf_reset (usbd_core_handle_struct *pudev) +{ + uint8_t i; + + g_free_buf_addr = ENDP_BUF_ADDR; + + /* configure endpoint 0 buffer */ + pbuf_reg->tx_addr = (uint16_t)g_free_buf_addr; + g_free_buf_addr += USBD_EP0_MAX_SIZE; + + pbuf_reg->rx_addr = (uint16_t)g_free_buf_addr; + g_free_buf_addr += USBD_EP0_MAX_SIZE; + + /* configure endpoint 0 Rx count */ + if (USBD_EP0_MAX_SIZE > 62U) { + pbuf_reg->rx_count = ((USBD_EP0_MAX_SIZE << 5U) - 1U) | 0x8000U; + } else { + pbuf_reg->rx_count = ((USBD_EP0_MAX_SIZE + 1U) & ~1U) << 9U; + } + + pudev->in_ep[EP0].maxpacket = USBD_EP0_MAX_SIZE; + pudev->out_ep[EP0].maxpacket = USBD_EP0_MAX_SIZE; + + /* set endpoints address */ + for (i = 0U; i < EP_COUNT; i++) + { + _EP_ADDR_SET(i, i); + } + + /* set device address as default address 0 */ + USBD_REG_SET(USBD_DADDR, DADDR_USBEN); + + /* clear endpoint 0 register */ + USBD_REG_SET(USBD_EPxCS(EP0), USBD_EPxCS(EP0)); + + USBD_REG_SET(USBD_EPxCS(EP0), EP_CONTROL | EPRX_VALID | EPTX_NAK); + + pudev->status = USBD_DEFAULT; + + return USBD_OK; +} + +/*! + \brief handle USB suspend event + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +static uint8_t usbd_intf_suspend (usbd_core_handle_struct *pudev) +{ + /* store the device current status */ + pudev->prev_status = pudev->status; + + /* set device in suspended state */ + pudev->status = USBD_SUSPENDED; + + /* enter USB in suspend and mcu system in low power mode */ + if (g_suspend_enabled) { + usbd_suspend(); + } else { + /* if not possible then resume after xx ms */ + g_ESOF_count = 3U; + } + + return USBD_OK; +} + +/*! + \brief handle USB wakeup event + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +static uint8_t usbd_intf_wakeup (usbd_core_handle_struct *pudev) +{ + /* restore the old status */ + pudev->status = pudev->prev_status; + +#ifdef LPM_ENABLED + if ((0U == g_remote_wakeup_on) && (0U == L1_resume)) { + resume_mcu(); + } else if (1U == g_remote_wakeup_on) { + /* no operation */ + } else { + L1_resume = 0U; + } +#else + if (0U == g_remote_wakeup_on) { + resume_mcu(); + } +#endif /* LPM_ENABLED */ + + return USBD_OK; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_pwr.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_pwr.c new file mode 100644 index 0000000000000000000000000000000000000000..febdd765f4cc33d3d4b738992bfa4bca3e1b1d4f --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_pwr.c @@ -0,0 +1,159 @@ +/*! + \file usbd_pwr.c + \brief USB device power management driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbd_pwr.h" + +#ifdef USBD_LOWPWR_MODE_ENABLE +static void lowpower_mode_exit (void); +#endif /* USBD_LOWPWR_MODE_ENABLE */ + +__IO uint8_t g_ESOF_count = 0U; +__IO uint8_t g_suspend_enabled = 1U; +__IO uint8_t g_remote_wakeup_on = 0U; + +#ifdef LPM_ENABLED +extern __IO uint32_t L1_resume; +#endif /* LPM_ENABLED */ + +/*! + \brief USB wakeup first operation is to wakeup mcu + \param[in] none + \param[out] none + \retval none +*/ +void resume_mcu (void) +{ + /* clear low_power mode bit in USBD_CTL */ + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) & (~CTL_LOWM)); + +#ifdef USBD_LOWPWR_MODE_ENABLE + + /* restore normal operations */ + lowpower_mode_exit(); + +#endif /* USBD_LOWPWR_MODE_ENABLE */ + + /* clear SETSPS bit */ + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) & (~CTL_SETSPS)); +} + +#ifdef USBD_LOWPWR_MODE_ENABLE + +/*! + \brief restore system clocks and power while exiting suspend mode + \param[in] none + \param[out] none + \retval none +*/ +static void lowpower_mode_exit (void) +{ + /* restore system clock */ + + /* enable HSE */ + rcu_osci_on(RCU_HXTAL); + + /* wait till HSE is ready */ + while(RESET == rcu_flag_get(RCU_FLAG_HXTALSTB)); + + /* enable PLL */ + rcu_osci_on(RCU_PLL_CK); + + /* wait till PLL is ready */ + while(RESET == rcu_flag_get(RCU_FLAG_PLLSTB)); + + /* select PLL as system clock source */ + rcu_system_clock_source_config(RCU_CKSYSSRC_PLL); + + /* wait till PLL is used as system clock source */ + while(0x08 != rcu_system_clock_source_get()); + + /* low power sleep on exit disabled */ + system_lowpower_reset(SCB_LPM_DEEPSLEEP); +} + +#endif /* USBD_LOWPWR_MODE_ENABLE */ + +/*! + \brief set USB device to suspend mode + \param[in] none + \param[out] none + \retval none +*/ +void usbd_suspend (void) +{ + /* set usb module to suspend and low-power mode */ + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) | CTL_SETSPS | CTL_LOWM); + +#ifdef USBD_LOWPWR_MODE_ENABLE + + /* check wakeup flag is set */ + if (0 == (USBD_REG_GET(USBD_INTF) & INTF_WKUPIF)) { + /* enter DEEP_SLEEP mode with LDO in low power mode */ + pmu_to_deepsleepmode(PMU_LDO_LOWPOWER, WFI_CMD); + } else { + /* clear wakeup interrupt flag */ + USBD_REG_SET(USBD_INTF, CLR_WKUPIF); + + /* clear set_suspend flag */ + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) & ~CTL_SETSPS); + } + +#endif /* USBD_LOWPWR_MODE_ENABLE */ +} + +/*! + \brief start to remote wakeup + \param[in] none + \param[out] none + \retval none +*/ +void usbd_remote_wakeup_active(void) +{ + resume_mcu(); + +#ifdef LPM_ENABLED + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) | CTL_L1RSREQ); + + L1_resume = 1U; +#else + g_remote_wakeup_on = 1U; + + g_ESOF_count = 15U; + USBD_REG_SET(USBD_CTL, USBD_REG_GET(USBD_CTL) | CTL_RSREQ); +#endif /* LPM_ENABLED */ +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_std.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_std.c new file mode 100644 index 0000000000000000000000000000000000000000..582d614fac5241574a7b7f5f8950736a9d6bc154 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbd_driver/Source/usbd_std.c @@ -0,0 +1,868 @@ +/*! + \file usbd_std.c + \brief USB device stand routines + \note about USB standard, please refer to the USB2.0 protocol + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbd_std.h" + +uint8_t g_device_address = 0U; + +/* USB enumeration handle functions */ +static void usbd_getdescriptor (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setaddress (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setconfiguration (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_getconfiguration (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_getstatus (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setfeature (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_clearfeature (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_reserved (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setdescriptor (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_getinterface (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setinterface (usbd_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_synchframe (usbd_core_handle_struct *pudev, usb_device_req_struct *req); + +static uint8_t* usbd_device_descriptor_get (usbd_core_handle_struct *pudev, + uint8_t index, + uint16_t *pLen); + +static uint8_t* usbd_configuration_descriptor_get (usbd_core_handle_struct *pudev, + uint8_t index, + uint16_t *pLen); + +static uint8_t* usbd_string_descriptor_get (usbd_core_handle_struct *pudev, + uint8_t index, + uint16_t *pLen); + +#ifdef LPM_ENABLED +static uint8_t* usbd_bos_descriptor_get (usbd_core_handle_struct *pudev, uint16_t *pLen); +#endif /* LPM_ENABLED */ + +/* standard device request handler */ +static void (*standard_device_request[])(usbd_core_handle_struct *pudev, usb_device_req_struct *req) = +{ + usbd_getstatus, + usbd_clearfeature, + usbd_reserved, + usbd_setfeature, + usbd_reserved, + usbd_setaddress, + usbd_getdescriptor, + usbd_setdescriptor, + usbd_getconfiguration, + usbd_setconfiguration, + usbd_getinterface, + usbd_setinterface, + usbd_synchframe, +}; + +/* get standard descriptor handler */ +static uint8_t* (*standard_descriptor_get[])(usbd_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) = +{ + usbd_device_descriptor_get, + usbd_configuration_descriptor_get, + usbd_string_descriptor_get +}; + +/*! + \brief USB setup stage processing + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +uint8_t usbd_setup_transaction (usbd_core_handle_struct *pudev) +{ + usb_device_req_struct req; + + usbd_setup_request_parse (pudev, &req); + + switch (req.bmRequestType & USB_REQ_MASK) { + /* standard device request */ + case USB_STANDARD_REQ: + usbd_standard_request(pudev, &req); + break; + /* device class request */ + case USB_CLASS_REQ: + usbd_device_class_request(pudev, &req); + break; + /* vendor defined request */ + case USB_VENDOR_REQ: + usbd_vendor_request(pudev, &req); + break; + default: + usbd_ep_stall(pudev, 0x00U); + break; + } + return USBD_OK; +} + +/*! + \brief data out stage processing + \param[in] pudev: pointer to USB device instance + \param[in] ep_num: endpoint identifier(0..7) + \param[out] none + \retval USB device operation status +*/ +uint8_t usbd_out_transaction (usbd_core_handle_struct *pudev, uint8_t ep_num) +{ + usb_ep_struct *ep = &pudev->out_ep[ep_num]; + + if (0U == ep_num) { + if (0U != pudev->ctl_count) { + if (ep->trs_len > ep->maxpacket) { + /* one data packet has been received, update trs_len */ + ep->trs_len -= ep->maxpacket; + + /* continue to receive remain data */ + usbd_ep_rx(pudev, EP0_OUT, ep->trs_buf, (uint16_t)ep->trs_len); + } else { + if (USBD_CONFIGURED == pudev->status) { + /* device class handle */ + pudev->class_data_handler(pudev, USBD_RX, EP0); + } + + /* enter the control transaction status stage */ + USBD_CONTRL_STATUS_TX(); + + pudev->ctl_count = 0U; + } + } else { + /* clear endpoint status_out status */ + USBD_STATUS_OUT_CLEAR(EP0); + } + } else { + if (USBD_CONFIGURED == pudev->status) { + pudev->class_data_handler(pudev, USBD_RX, ep_num); + } + } + return USBD_OK; +} + +/*! + \brief data in stage processing + \param[in] pudev: pointer to USB device instance + \param[in] ep_num: endpoint identifier(0..7) + \param[out] none + \retval USB device operation status +*/ +uint8_t usbd_in_transaction (usbd_core_handle_struct *pudev, uint8_t ep_num) +{ + usb_ep_struct *ep = &pudev->in_ep[ep_num]; + + if (0U == ep_num) { + if (0U != pudev->ctl_count) { + if (ep->trs_len > ep->maxpacket) { + /* one data packet has been transmited, update trs_len */ + ep->trs_len -= ep->maxpacket; + + /* continue to transmit remain data */ + usbd_ep_tx (pudev, EP0_IN, ep->trs_buf, (uint16_t)ep->trs_len); + + usbd_ep_rx (pudev, 0U, NULL, 0U); + } else { +#ifndef USB_DFU + /* transmit length is maxpacket multiple, so send zero length packet */ + if ((0U == (ep->trs_len % ep->maxpacket)) && (ep->trs_len < pudev->ctl_count)) { + usbd_ep_tx (pudev, EP0_IN, NULL, 0U); + + pudev->ctl_count = 0U; + + usbd_ep_rx (pudev, 0U, NULL, 0U); + } else +#endif /* USB_DFU */ + { + ep->trs_len = 0U; + + if (USBD_CONFIGURED == pudev->status) { + pudev->class_data_handler(pudev, USBD_TX, EP0); + } + + USBD_CONTRL_STATUS_RX(); + + pudev->ctl_count = 0U; + } + } + } else { + if (0U != g_device_address) { + USBD_REG_SET(USBD_DADDR, DADDR_USBEN | g_device_address); + g_device_address = 0U; + } + } + } else { + ep->trs_len -= ep->trs_count; + + if (0U == ep->trs_len) { + if (USBD_CONFIGURED == pudev->status) { + pudev->class_data_handler(pudev, USBD_TX, ep_num); + } + } else { + usbd_ep_tx(pudev, ep_num, ep->trs_buf, (uint16_t)ep->trs_len); + } + } + + return USBD_OK; +} + +/*! + \brief handle USB standard device request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval USB device operation status +*/ +uint8_t usbd_standard_request (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* call device request handle function */ + (*standard_device_request[req->bRequest])(pudev, req); + + return USBD_OK; +} + +/*! + \brief handle USB device class request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device class request + \param[out] none + \retval USB device operation status +*/ +uint8_t usbd_device_class_request (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + usbd_status_enum ret; + + switch (pudev->status) { + case USBD_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + /* call device class handle function */ + ret = (usbd_status_enum)(pudev->class_req_handler(pudev, req)); + + if ((0U == req->wLength) && (USBD_OK == ret)) { + /* no data stage */ + USBD_CONTRL_STATUS_TX(); + } + } else { + usbd_enum_error(pudev, req); + } + break; + default: + usbd_enum_error(pudev, req); + break; + } + + return USBD_OK; +} + +/*! + \brief handle USB vendor request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB vendor request + \param[out] none + \retval USB device operation status +*/ +uint8_t usbd_vendor_request (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* added by user */ + + return USBD_OK; +} + +/*! + \brief no operation, just for reserved + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_reserved (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* no operation */ +} + +#ifdef LPM_ENABLED +/*! + \brief get BOS descriptor + \param[in] pudev: pointer to USB device instance + \param[in] pLen: data length pointer + \param[out] none + \retval descriptor buffer pointer +*/ +static uint8_t* usbd_bos_descriptor_get (usbd_core_handle_struct *pudev, uint16_t *pLen) +{ + *pLen = pudev->bos_desc[2] | ((uint16_t)pudev->bos_desc[3] << 8); + + return pudev->bos_desc; +} + +#endif /* LPM_ENABLED */ + +/*! + \brief get the device descriptor + \param[in] pudev: pointer to USB device instance + \param[in] index: no use + \param[out] pLen: data length pointer + \retval descriptor buffer pointer +*/ +static uint8_t* usbd_device_descriptor_get (usbd_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) +{ + *pLen = pudev->dev_desc[0]; + + return pudev->dev_desc; +} + +/*! + \brief get the configuration descriptor + \brief[in] pudev: pointer to USB device instance + \brief[in] index: no use + \param[out] pLen: data length pointer + \retval descriptor buffer pointer +*/ +static uint8_t* usbd_configuration_descriptor_get (usbd_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) +{ + *pLen = pudev->config_desc[2]; + + return pudev->config_desc; +} + +/*! + \brief get string descriptor + \param[in] pudev: pointer to USB device instance + \param[in] index: string descriptor index + \param[out] pLen: pointer to string length + \retval none +*/ +static uint8_t* usbd_string_descriptor_get (usbd_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) +{ + uint8_t *desc = pudev->strings[index]; + + *pLen = desc[0]; + + return desc; +} + +/*! + \brief handle Get_Status request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getstatus (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t ep_addr; + uint16_t config_status = 0x0000U; + uint16_t endp_status = 0x0000U; + + switch(req->bmRequestType & USB_REQ_RECIPIENT_MASK) { + case USB_REQTYPE_DEVICE: + switch (pudev->status) { + case USBD_ADDRESSED: + case USBD_CONFIGURED: + +#ifdef USBD_SELF_POWERED + config_status = USB_STATUS_SELF_POWERED; +#endif /* USBD_SELF_POWERED */ + + if (pudev->remote_wakeup) { + config_status |= USB_STATUS_REMOTE_WAKEUP; + } + + usbd_ep_tx(pudev, EP0_IN, (uint8_t *)&config_status, 2U); + break; + default: + break; + } + break; + case USB_REQTYPE_INTERFACE: + switch (pudev->status) { + case USBD_ADDRESSED: + usbd_enum_error(pudev, req); + break; + case USBD_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + usbd_ep_tx(pudev, EP0_IN, (uint8_t *)&config_status, 2U); + } else { + usbd_enum_error(pudev, req); + } + break; + default: + break; + } + break; + case USB_REQTYPE_ENDPOINT: + /* get enndpoint address */ + ep_addr = LOWBYTE(req->wIndex); + + switch (pudev->status) { + case USBD_ADDRESSED: + if (IS_NOT_EP0(ep_addr)) { + usbd_enum_error(pudev, req); + } + break; + case USBD_CONFIGURED: + if ((ep_addr & 0x80U) == 0x80U) { + if(pudev->in_ep[ep_addr & 0x7FU].stall) { + endp_status = 0x0001U; + } + } else { + if (pudev->out_ep[ep_addr].stall) { + endp_status = 0x0001U; + } + } + usbd_ep_tx(pudev, EP0_IN, (uint8_t *)&endp_status, 2U); + break; + + default: + break; + } + break; + default: + usbd_enum_error(pudev, req); + break; + } +} + +/*! + \brief handle USB Clear_Feature request + \param[in] pudev: pointer to USB device instance + \param[in] req: USB device request + \param[out] none + \retval none +*/ +static void usbd_clearfeature (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t ep_addr = 0U; + + switch (req->bmRequestType & USB_REQ_RECIPIENT_MASK) { + case USB_REQTYPE_DEVICE: + switch (pudev->status) { + case USBD_ADDRESSED: + case USBD_CONFIGURED: + /* clear device remote wakeup feature */ + if (USB_FEATURE_REMOTE_WAKEUP == req->wValue) { + pudev->remote_wakeup = 0U; + pudev->class_req_handler(pudev, req); + USBD_CONTRL_STATUS_TX(); + } else if (USB_FEATURE_TEST_MODE == req->wValue) { + /* can not clear test_mode feature */ + usbd_enum_error(pudev, req); + } else { + /* no operation */ + } + break; + default: + break; + } + break; + case USB_REQTYPE_INTERFACE: + switch (pudev->status) { + case USBD_ADDRESSED: + usbd_enum_error (pudev, req); + break; + case USBD_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + /* no operation */ + } else { + usbd_enum_error(pudev, req); + } + break; + default: + break; + } + break; + case USB_REQTYPE_ENDPOINT: + /* get endpoint address */ + ep_addr = LOWBYTE(req->wIndex); + + switch (pudev->status) { + case USBD_ADDRESSED: + if (IS_NOT_EP0(ep_addr)) { + usbd_enum_error(pudev, req); + } + break; + case USBD_CONFIGURED: + /* clear endpoint halt feature */ + if (USB_FEATURE_ENDP_HALT == req->wValue) { + if (IS_NOT_EP0(ep_addr)) { + usbd_ep_clear_stall(pudev, ep_addr); + } + } + + pudev->class_req_handler(pudev, req); + + USBD_CONTRL_STATUS_TX(); + break; + default: + break; + } + break; + default: + usbd_enum_error(pudev, req); + break; + } +} + +/*! + \brief handle USB Set_Feature request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setfeature (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t ep_addr = 0U; + + switch (req->bmRequestType & USB_REQ_RECIPIENT_MASK) { + case USB_REQTYPE_DEVICE: + switch (pudev->status) { + case USBD_ADDRESSED: + case USBD_CONFIGURED: + /* set device remote wakeup feature */ + if (USB_FEATURE_REMOTE_WAKEUP == req->wValue) { + pudev->remote_wakeup = 1U; + + USBD_CONTRL_STATUS_TX(); + } + break; + default: + break; + } + break; + case USB_REQTYPE_INTERFACE: + switch (pudev->status) { + case USBD_ADDRESSED: + usbd_enum_error(pudev, req); + break; + case USBD_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + /* no operation */ + } else { + usbd_enum_error(pudev, req); + } + break; + default: + break; + } + break; + case USB_REQTYPE_ENDPOINT: + /* get endpoint address */ + ep_addr = LOWBYTE(req->wIndex); + + switch (pudev->status) { + case USBD_ADDRESSED: + if (IS_NOT_EP0(ep_addr)) { + usbd_enum_error(pudev, req); + } + break; + case USBD_CONFIGURED: + /* set endpoint halt feature */ + if (USB_FEATURE_ENDP_HALT == req->wValue) { + if (IS_NOT_EP0(ep_addr)) { + usbd_ep_stall(pudev, ep_addr); + } + } + USBD_CONTRL_STATUS_TX(); + break; + default: + break; + } + break; + default: + usbd_enum_error(pudev, req); + break; + } +} + +/*! + \brief handle USB Set_Address request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setaddress (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + if ((0U == req->wIndex) && (0U == req->wLength)) { + g_device_address = (uint8_t)(req->wValue) & 0x7FU; + + if (USBD_CONFIGURED == pudev->status) { + usbd_enum_error(pudev, req); + } else { + USBD_CONTRL_STATUS_TX(); + + if (0U != g_device_address) { + pudev->status = USBD_ADDRESSED; + } else { + pudev->status = USBD_DEFAULT; + } + } + } else { + usbd_enum_error(pudev, req); + } +} + +/*! + \brief handle USB Get_Descriptor request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getdescriptor (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + if (USB_REQTYPE_DEVICE == (req->bmRequestType & USB_REQ_RECIPIENT_MASK)) { + uint8_t *pbuf = NULL; + uint8_t desc_type = (uint8_t)(req->wValue >> 8); + uint8_t desc_index = (uint8_t)(req->wValue) & 0xFFU; + uint16_t len = 0U; + + if ((desc_type <= 0x03U) && (desc_index <= 0x05U)) { + /* call corresponding descriptor get function */ + pbuf = standard_descriptor_get[desc_type - 1U](pudev, desc_index, &len); + } +#ifdef LPM_ENABLED + else if (USB_DESCTYPE_BOS == desc_type) { + pbuf = usbd_bos_descriptor_get(pudev, &len); + } +#endif /* LPM_ENABLED */ + else { + usbd_enum_error(pudev, req); + } + + if ((0U != len) && (0U != req->wLength)) { + len = MIN(len, req->wLength); + + usbd_ep_tx (pudev, EP0_IN, pbuf, len); + } + } else if (USB_REQTYPE_INTERFACE == (req->bmRequestType & USB_REQ_RECIPIENT_MASK)) { + if (NULL != pudev->class_req_handler) { + /* get device class special descriptor */ + pudev->class_req_handler(pudev, req); + } + } else { + + } +} + +/*! + \brief handle USB Set_Descriptor request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setdescriptor (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* no handle */ +} + +/*! + \brief handle USB Get_Configuration request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getconfiguration (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint32_t usbd_default_config = 0U; + + if (req->wLength != 1U) { + usbd_enum_error(pudev, req); + } else { + switch (pudev->status) { + case USBD_ADDRESSED: + usbd_ep_tx (pudev, EP0_IN, (uint8_t *)&usbd_default_config, 1U); + break; + case USBD_CONFIGURED: + usbd_ep_tx (pudev, EP0_IN, &pudev->config_num, 1U); + break; + default: + usbd_enum_error(pudev, req); + break; + } + } +} + +/*! + \brief handle USB Set_Configuration request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setconfiguration (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + + if (cfgidx > USBD_CFG_MAX_NUM) { + usbd_enum_error(pudev, req); + } else { + switch (pudev->status) { + case USBD_ADDRESSED: + if (cfgidx){ + pudev->config_num = cfgidx; + pudev->status = USBD_CONFIGURED; + pudev->class_init(pudev, cfgidx); + USBD_CONTRL_STATUS_TX(); + } else { + USBD_CONTRL_STATUS_TX(); + } + break; + case USBD_CONFIGURED: + if (0U == cfgidx) { + pudev->status = USBD_ADDRESSED; + pudev->config_num = cfgidx; + pudev->class_deinit(pudev, cfgidx); + USBD_CONTRL_STATUS_TX(); + } else if (cfgidx != pudev->config_num) { + /* clear old configuration */ + pudev->class_deinit(pudev, pudev->config_num); + + /* set new configuration */ + pudev->config_num = cfgidx; + pudev->class_init(pudev, cfgidx); + USBD_CONTRL_STATUS_TX(); + } else { + USBD_CONTRL_STATUS_TX(); + } + break; + default: + break; + } + } +} + +/*! + \brief handle USB Get_Interface request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getinterface (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + switch (pudev->status) { + case USBD_ADDRESSED: + usbd_enum_error(pudev, req); + break; + case USBD_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + if (NULL != pudev->class_req_handler) { + pudev->class_req_handler(pudev, req); + } + } else { + usbd_enum_error(pudev, req); + } + break; + default: + break; + } +} + +/*! + \brief handle USB Set_Interface request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setinterface (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + switch (pudev->status) { + case USBD_ADDRESSED: + usbd_enum_error(pudev, req); + break; + case USBD_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + if (NULL != pudev->class_req_handler) { + pudev->class_req_handler(pudev, req); + } + + USBD_CONTRL_STATUS_TX(); + } else { + usbd_enum_error(pudev, req); + } + break; + default: + break; + } +} + +/*! + \brief handle USB SynchFrame request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_synchframe (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* no handle */ +} + +/*! + \brief decode setup data packet + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +void usbd_setup_request_parse (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t *setup_data = pudev->setup_packet; + + req->bmRequestType = *setup_data; + req->bRequest = *(uint8_t *)(setup_data + 1U); + req->wValue = SWAPBYTE (setup_data + 2U); + req->wIndex = SWAPBYTE (setup_data + 4U); + req->wLength = SWAPBYTE (setup_data + 6U); + + pudev->ctl_count = req->wLength; +} + +/*! + \brief handle USB enumeration error event + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +void usbd_enum_error (usbd_core_handle_struct *pudev, usb_device_req_struct *req) +{ + usbd_ep_stall(pudev, EP0); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_core.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_core.h new file mode 100644 index 0000000000000000000000000000000000000000..b50f90308643456ab86f179ad7534baa5a086451 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_core.h @@ -0,0 +1,304 @@ +/*! + \file usb_core.h + \brief USB core driver header file + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USB_CORE_H +#define USB_CORE_H + +#include "usb_conf.h" +#include "usb_regs.h" +#include "usb_defines.h" + +/* constants definitions */ +#define USB_MAX_EP0_SIZE 64U /* endpoint 0 max packet size */ +#define RX_MAX_DATA_LENGTH 512U /* host rx buffer max data length */ +#define HC_MAX_PACKET_COUNT 140U /* host channel max packet count */ + +#define USB_MAX_DEV_EPCOUNT USBFS_MAX_DEV_EPCOUNT +#define USB_MAX_FIFOS (USBFS_MAX_HOST_CHANNELCOUNT * 2U - 1U) + +/* USB core status */ +typedef enum +{ + USB_OK = 0, /* USB core OK status */ + USB_FAIL /* USB core fail status */ +}usb_status_enum; + +/* USB host channel status */ +typedef enum +{ + HC_IDLE = 0, /* USB host channel idle status */ + HC_XF, /* USB host channel transfer status */ + HC_HALTED, /* USB host channel halted status */ + HC_NAK, /* USB host channel nak status */ + HC_NYET, /* USB host channel nyet status */ + HC_STALL, /* USB host channel stall status */ + HC_TRACERR, /* USB host channel tracerr status */ + HC_BBERR, /* USB host channel bberr status */ + HC_DTGERR, /* USB host channel dtgerr status */ +}hc_status_enum; + +/* USB URB(USB request block) state */ +typedef enum +{ + URB_IDLE = 0, /* USB URB idle status */ + URB_DONE, /* USB URB done status */ + URB_NOTREADY, /* USB URB not ready status */ + URB_ERROR, /* USB URB error status */ + URB_STALL, /* USB URB stall status */ + URB_PING /* USB URB ping status */ +}urb_state_enum; + +/* USB core configuration */ +typedef struct +{ + uint8_t core_id; /* USB core id */ + uint8_t core_speed; /* USB core speed */ + uint8_t phy_interface; /* USB PHY interface */ + uint8_t host_channel_num; /* USB host channel number */ + uint8_t dev_endp_num; /* USB device endpoint number */ + uint8_t sof_output; /* USB SOF output */ + uint8_t low_power; /* USB low power */ + uint16_t max_packet_size; /* USB max packet size */ + uint16_t max_fifo_size; /* USB fifo size */ +}usb_core_cfgs_struct; + +typedef enum +{ + USBD_OK = 0, /* USB device ok status */ + USBD_BUSY, /* USB device busy status */ + USBD_FAIL, /* USB device fail stauts */ +}usbd_status_enum; + +/* USB control transfer state */ +typedef enum +{ + USB_CTRL_IDLE = 0, /* USB control transfer idle state */ + USB_CTRL_SETUP, /* USB control transfer setup state */ + USB_CTRL_DATA_IN, /* USB control transfer data in state */ + USB_CTRL_DATA_OUT, /* USB control transfer data out state */ + USB_CTRL_STATUS_IN, /* USB control transfer status in state*/ + USB_CTRL_STATUS_OUT, /* USB control transfer status out state */ + USB_CTRL_STALL /* USB control transfer stall state */ +}usbd_control_state_enum; + +/* USB transfer direction */ +typedef enum +{ + USB_RX = 0, /* receive direction type value */ + USB_TX /* transmit direction type value */ +}usb_dir_enum; + +/* USB endpoint in device mode */ +typedef struct +{ + uint8_t endp_type; /* USB endpoint type */ + uint8_t endp_frame; /* USB endpoint frame */ + uint32_t endp_mps; /* USB endpoint max packet size */ + + /* Transaction level variables */ + uint8_t *xfer_buff; /* USB transfer buffer */ + uint32_t xfer_len; /* USB transfer length */ + uint32_t xfer_count; /* USB transfer count */ + + uint32_t dma_addr; /* USBHS can use DMA */ +}usb_ep_struct; + +/* USB device standard request */ +typedef struct +{ + uint8_t bmRequestType; /* USB device request type */ + uint8_t bRequest; /* USB device request */ + uint16_t wValue; /* USB device request value */ + uint16_t wIndex; /* USB device request index */ + uint16_t wLength; /* USB device request length */ +}usb_device_req_struct; + +/* USB core device driver */ +typedef struct +{ + uint8_t config_num; /* USB configuration number */ + __IO uint8_t status; /* USB status */ + uint8_t ctl_status; /* USB control status */ + uint8_t prev_status; /* USB previous status */ + uint8_t connection_status; /* USB connection status */ + uint32_t remote_wakeup; /* USB remote wakeup */ + + /* transfer level variables */ + uint32_t remain_len; /* USB remain length */ + uint32_t sum_len; /* USB sum length */ + uint32_t ctl_len; /* USB control length */ + uint8_t setup_packet[8 * 3]; /* USB setup packet */ + + usb_ep_struct in_ep[USB_MAX_DEV_EPCOUNT]; /* USB in endpoint */ + usb_ep_struct out_ep[USB_MAX_DEV_EPCOUNT]; /* USB out endpoint */ + + uint8_t *dev_desc; /* device descriptor */ + uint8_t *config_desc; /* configuration descriptor */ + uint8_t* *strings; /* configuration strings */ + + /* device class handler */ + uint8_t (*class_init) (void *pudev, uint8_t config_index); /* device class initialize */ + uint8_t (*class_deinit) (void *pudev, uint8_t config_index); /* device class deinitialize */ + uint8_t (*class_req_handler) (void *pudev, usb_device_req_struct *req); /* device request handler */ + uint8_t (*class_data_handler) (void *pudev, usb_dir_enum rx_tx, uint8_t ep_num); /* device data handler */ +}dcd_dev_struct; + +/* USB core host mode channel */ +typedef struct +{ + uint8_t dev_addr; /* device address */ + uint8_t dev_speed; /* device speed */ + uint8_t DPID; /* endpoint transfer data pid */ + uint8_t endp_id; /* endpoint number */ + uint8_t endp_in; /* endpoint in */ + uint8_t endp_type; /* endpoint type */ + uint16_t endp_mps; /* endpoint max pactet size */ + uint16_t info; /* channel information */ + + uint8_t *xfer_buff; /* transfer buffer */ + uint32_t xfer_len; /* transfer length */ + uint32_t xfer_count; /* trasnfer count */ + + uint32_t err_count; /* USB transfer error count */ + + hc_status_enum status; /* channel status */ + urb_state_enum urb_state; /* URB state */ + + uint8_t data_tg_in; /* data in toggle */ + uint8_t data_tg_out; /* data out toggle */ +}usb_hostchannel_struct; + +/* USB core host driver */ +typedef struct +{ + uint8_t rx_buffer[RX_MAX_DATA_LENGTH]; /* rx buffer */ + uint8_t connect_status; /* device connect status */ + usb_hostchannel_struct host_channel[USB_MAX_FIFOS]; /* host channel */ + void (*vbus_drive) (void *pudev, uint8_t state); /* the vbus driver function */ +}hcd_dev_struct; + +#ifdef USE_OTG_MODE + +/* USB core OTG-mode driver */ +typedef struct +{ + uint8_t OTG_State; /* OTG state */ + uint8_t OTG_PrevState; /* OTG previous state */ + uint8_t OTG_Mode; /* OTG mode */ +}otg_dev_struct; + +#endif /* USE_OTG_MODE */ + +/* USB core driver */ +typedef struct +{ + usb_core_cfgs_struct cfg; + +#ifdef USE_DEVICE_MODE + dcd_dev_struct dev; +#endif /* USE_DEVICE_MODE */ + +#ifdef USE_HOST_MODE + hcd_dev_struct host; +#endif /* USE_HOST_MODE */ + +#ifdef USE_OTG_MODE + otg_dev_struct otg; +#endif /* USE_OTG_MODE */ + + void (*udelay) (const uint32_t usec); + void (*mdelay) (const uint32_t msec); +}usb_core_handle_struct; + +/* function declarations */ + +/* global APIs */ +/* initializes the USB controller registers and prepares the core device mode or host mode operation */ +usb_status_enum usb_core_init (usb_core_handle_struct *pudev); +/* initialize core parameters */ +usb_status_enum usb_core_select (usb_core_handle_struct *pudev, usb_core_id_enum core_id); +/* read a packet from the rx fifo associated with the endpoint */ +void* usb_fifo_read (uint8_t *dest, uint16_t len); +/* write a packet into the tx fifo associated with the endpoint */ +usb_status_enum usb_fifo_write (uint8_t *src, uint8_t chep_num, uint16_t len); +/* flush a tx fifo or all tx fifos */ +usb_status_enum usb_txfifo_flush (usb_core_handle_struct *pudev, uint8_t fifo_num); +/* flush the entire rx fifo */ +usb_status_enum usb_rxfifo_flush (usb_core_handle_struct *pudev); +/* set operation mode (host or device) */ +usb_status_enum usb_mode_set (usb_core_handle_struct *pudev, uint8_t mode); + +/* host APIs */ +#ifdef USE_HOST_MODE + +/* initializes USB core for host mode */ +usb_status_enum usb_hostcore_init (usb_core_handle_struct *pudev); +/* enables the host mode interrupts */ +usb_status_enum usb_hostint_enable (usb_core_handle_struct *pudev); +/* initialize host channel */ +usb_status_enum usb_hostchannel_init (usb_core_handle_struct *pudev, uint8_t hc_num); +/* halt channel */ +usb_status_enum usb_hostchannel_halt (usb_core_handle_struct *pudev, uint8_t hc_num); +/* prepare host channel for transferring packets */ +usb_status_enum usb_hostchannel_startxfer (usb_core_handle_struct *pudev, uint8_t hc_num); +/* reset host port */ +uint32_t usb_port_reset (usb_core_handle_struct *pudev); +/* control the VBUS to power */ +void usb_vbus_drive (usb_core_handle_struct *pudev, uint8_t state); +/* stop the USB host and clean up fifos */ +void usb_host_stop (usb_core_handle_struct *pudev); + +#endif /* USE_HOST_MODE */ + +/* device APIs */ +#ifdef USE_DEVICE_MODE + +/* initialize USB core registers for device mode */ +usb_status_enum usb_devcore_init (usb_core_handle_struct *pudev); +/* configures endpoint 0 to receive setup packets */ +void usb_ep0_startout (usb_core_handle_struct *pudev); +/* active remote wakeup signalling */ +void usb_remotewakeup_active (usb_core_handle_struct *pudev); +/* active USB core clock */ +void usb_clock_ungate (usb_core_handle_struct *pudev); +/* stop the device and clean up fifos */ +void usb_device_stop (usb_core_handle_struct *pudev); + +#endif /* USE_DEVICE_MODE */ + +#endif /* USB_CORE_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_defines.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_defines.h new file mode 100644 index 0000000000000000000000000000000000000000..d9d1fd3c0453657850abaa023be7aa9a266ba6ff --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_defines.h @@ -0,0 +1,128 @@ +/*! + \file usb_defines.h + \brief USB core defines + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USB_DEFINES_H +#define USB_DEFINES_H + +#include "usb_conf.h" + +/* constants definitions */ +typedef enum +{ + USB_HS_CORE_ID = 0, + USB_FS_CORE_ID = 1 +}usb_core_id_enum; + +typedef enum +{ + USB_SPEED_UNKNOWN = 0, + USB_SPEED_LOW, + USB_SPEED_FULL, + USB_SPEED_HIGH +}usb_speed_enum; + +#ifndef NULL + #define NULL (void *)0 /*!< USB null marco value*/ +#endif /* NULL */ + +#define USB_CORE_SPEED_HIGH 0U /* USB core speed is high-speed */ +#define USB_CORE_SPEED_FULL 1U /* USB core speed is full-speed */ + +#define USBFS_MAX_PACKET_SIZE 64U /* USBFS max packet size */ +#define USBFS_MAX_HOST_CHANNELCOUNT 8U /* USBFS host channel count */ +#define USBFS_MAX_DEV_EPCOUNT 4U /* USBFS device endpoint count */ +#define USBFS_MAX_FIFO_WORDLEN 320U /* USBFS max fifo size in words */ + +#define USBHS_MAX_PACKET_SIZE 512U /* USBHS max packet size */ +#define USBHS_MAX_HOST_CHANNELCOUNT 12U /* USBHS host channel count */ +#define USBHS_MAX_DEV_EPCOUNT 6U /* USBHS device endpoint count */ +#define USBHS_MAX_FIFO_WORDLEN 1280U /* USBHS max fifo size in words */ + +#define USB_CORE_ULPI_PHY 1U /* USB core use external ULPI PHY */ +#define USB_CORE_EMBEDDED_PHY 2U /* USB core use embedded PHY */ + +#define DSTAT_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0U /* USB enumerate speed use high-speed PHY clock in 30MHz or 60MHz */ +#define DSTAT_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1U /* USB enumerate speed use full-speed PHY clock in 30MHz or 60MHz */ +#define DSTAT_ENUMSPD_LS_PHY_6MHZ 2U /* USB enumerate speed use low-speed PHY clock in 6MHz */ +#define DSTAT_ENUMSPD_FS_PHY_48MHZ 3U /* USB enumerate speed use full-speed PHY clock in 48MHz */ + +#define GRSTATR_RPCKST_IN 2U /* in data packet received */ +#define GRSTATR_RPCKST_IN_XFER_COMP 3U /* in transfer completed (generates an interrupt if poped) */ +#define GRSTATR_RPCKST_DATA_TOGGLE_ERR 5U /* data toggle error (generates an interrupt if poped) */ +#define GRSTATR_RPCKST_CH_HALTED 7U /* channel halted (generates an interrupt if poped) */ + +#define DEVICE_MODE 0U /* USB core in device mode */ +#define HOST_MODE 1U /* USB core in host mode */ +#define OTG_MODE 2U /* USB core in OTG mode */ + +#define USB_EPTYPE_CTRL 0U /* USB control endpoint type */ +#define USB_EPTYPE_ISOC 1U /* USB synchronous endpoint type */ +#define USB_EPTYPE_BULK 2U /* USB bulk endpoint type */ +#define USB_EPTYPE_INTR 3U /* USB interrupt endpoint type */ +#define USB_EPTYPE_MASK 3U /* USB endpoint type mask */ + +#define RXSTAT_GOUT_NAK 1U /* global out NAK (triggers an interrupt) */ +#define RXSTAT_DATA_UPDT 2U /* out data packet received */ +#define RXSTAT_XFER_COMP 3U /* out transfer completed (triggers an interrupt) */ +#define RXSTAT_SETUP_COMP 4U /* setup transaction completed (triggers an interrupt) */ +#define RXSTAT_SETUP_UPDT 6U /* setup data packet received */ + +#define DPID_DATA0 0U /* device endpoint data PID is DATA0 */ +#define DPID_DATA1 2U /* device endpoint data PID is DATA1 */ +#define DPID_DATA2 1U /* device endpoint data PID is DATA2 */ +#define DPID_MDATA 3U /* device endpoint data PID is MDATA */ + +#define HC_PID_DATA0 0U /* host channel data PID is DATA0 */ +#define HC_PID_DATA2 1U /* host channel data PID is DATA2 */ +#define HC_PID_DATA1 2U /* host channel data PID is DATA1 */ +#define HC_PID_SETUP 3U /* host channel data PID is SETUP */ + +#define HPRT_PRTSPD_HIGH_SPEED 0U /* host port speed use high speed */ +#define HPRT_PRTSPD_FULL_SPEED 1U /* host port speed use full speed */ +#define HPRT_PRTSPD_LOW_SPEED 2U /* host port speed use low speed */ + +#define HCTLR_30_60_MHZ 0U /* USB PHY(ULPI) clock is 60MHz */ +#define HCTLR_48_MHZ 1U /* USB PHY(embedded full-speed) clock is 48MHz */ +#define HCTLR_6_MHZ 2U /* USB PHY(embedded low-speed) clock is 6MHz */ + +#define HCCHAR_CTRL 0U /* control channel type */ +#define HCCHAR_ISOC 1U /* synchronous channel type */ +#define HCCHAR_BULK 2U /* bulk channel type */ +#define HCCHAR_INTR 3U /* interrupt channel type */ + +#endif /* USB_DEFINES_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_regs.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_regs.h new file mode 100644 index 0000000000000000000000000000000000000000..2e7d444381005a5aaee185a6710817ca2408bfc8 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_regs.h @@ -0,0 +1,596 @@ +/*! + \file usb_regs.h + \brief USB FS cell registers definition and handle macros + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USB_REGS_H +#define USB_REGS_H + +#include "usb_conf.h" + +#define USBFS USBFS_BASE /*!< base address of USBFS registers */ + +/* registers location definitions */ +#define LOCATE_DIEPTFLEN(x) (0x104U + 4U * ((x) - 1U)) /*!< locate device in endpoint-x (x = 1..3) transfer length registers */ +#define LOCATE_HCHCTL(x) (0x500U + 0x20U * (x)) /*!< locate host channel-x control registers */ +#define LOCATE_HCHINTF(x) (0x508U + 0x20U * (x)) /*!< locate host channel-x interrupt flag registers */ +#define LOCATE_HCHINTEN(x) (0x50CU + 0x20U * (x)) /*!< locate host channel-x interrupt enable registers */ +#define LOCATE_HCHLEN(x) (0x510U + 0x20U * (x)) /*!< locate host channel-x transfer length registers */ +#define LOCATE_DIEPCTL(x) (0x900U + 0x20U * (x)) /*!< locate device in endpoint-x control registers */ +#define LOCATE_DOEPCTL(x) (0xB00U + 0x20U * (x)) /*!< locate device out endpoint-x control registers */ +#define LOCATE_DIEPINTF(x) (0x908U + 0x20U * (x)) /*!< locate device in endpoint-x interrupt flag registers */ +#define LOCATE_DOEPINTF(x) (0xB08U + 0x20U * (x)) /*!< locate device out endpoint-x interrupt flag registers */ +#define LOCATE_DIEPLEN(x) (0x910U + 0x20U * (x)) /*!< locate device in endpoint-x transfer length registers */ +#define LOCATE_DOEPLEN(x) (0xB10U + 0x20U * (x)) /*!< locate device out endpoint-x transfer length registers */ +#define LOCATE_DIEPxTFSTAT(x) (0x918U + 0x20U * (x)) /*!< locate Device in endpoint-x transmit fifo status register */ +#define LOCATE_FIFO(x) (((x) + 1U) << 12U) /*!< locate FIFO-x memory */ + +/* registers definitions */ +#define USB_GOTGCS REG32(((USBFS) + 0x0000U)) /*!< global OTG control and status register */ +#define USB_GOTGINTF REG32(((USBFS) + 0x0004U)) /*!< global OTG interrupt flag register */ +#define USB_GAHBCS REG32(((USBFS) + 0x0008U)) /*!< global AHB control and status register */ +#define USB_GUSBCS REG32(((USBFS) + 0x000CU)) /*!< global USB control and status register */ +#define USB_GRSTCTL REG32(((USBFS) + 0x0010U)) /*!< global reset control register */ +#define USB_GINTF REG32(((USBFS) + 0x0014U)) /*!< global interrupt flag register */ +#define USB_GINTEN REG32(((USBFS) + 0x0018U)) /*!< global interrupt enable register */ +#define USB_GRSTATR REG32(((USBFS) + 0x001CU)) /*!< global receive status read register */ +#define USB_GRSTATP REG32(((USBFS) + 0x0020U)) /*!< global receive status read and pop register */ +#define USB_GRFLEN REG32(((USBFS) + 0x0024U)) /*!< global receive fifo length register */ +#define USB_HNPTFLEN REG32(((USBFS) + 0x0028U)) /*!< host non-periodic transmit fifo length register */ +#define USB_DIEP0TFLEN REG32(((USBFS) + 0x0028U)) /*!< device in endpoint 0 transmit fifo length register */ +#define USB_HNPTFQSTAT REG32(((USBFS) + 0x002CU)) /*!< host non-periodic transmint fifo/queue status register */ +#define USB_GCCFG REG32(((USBFS) + 0x0038U)) /*!< global core configuration register */ +#define USB_CID REG32(((USBFS) + 0x003CU)) /*!< core id register */ +#define USB_HPTFLEN REG32(((USBFS) + 0x0100U)) /*!< host periodic transmit fifo length register */ +#define USB_DIEPxTFLEN(x) REG32(((USBFS) + LOCATE_DIEPTFLEN(x))) /*!< device in endpoint transmit fifo length register */ + +#define USB_HCTL REG32(((USBFS) + 0x0400U)) /*!< host control register */ +#define USB_HFT REG32(((USBFS) + 0x0404U)) /*!< host frame interval register */ +#define USB_HFINFR REG32(((USBFS) + 0x0408U)) /*!< host frame information remaining register */ +#define USB_HPTFQSTAT REG32(((USBFS) + 0x0410U)) /*!< host periodic transmit fifo/queue status register */ +#define USB_HACHINT REG32(((USBFS) + 0x0414U)) /*!< host all channels interrupt register */ +#define USB_HACHINTEN REG32(((USBFS) + 0x0418U)) /*!< host all channels interrupt enable register */ +#define USB_HPCS REG32(((USBFS) + 0x0440U)) /*!< host port control and status register */ +#define USB_HCHxCTL(x) REG32(((USBFS) + LOCATE_HCHCTL(x))) /*!< host channel-x control register */ +#define USB_HCHxINTF(x) REG32(((USBFS) + LOCATE_HCHINTF(x))) /*!< host channel-x interrupt flag register */ +#define USB_HCHxINTEN(x) REG32(((USBFS) + LOCATE_HCHINTEN(x))) /*!< host channel-x interrupt enable register */ +#define USB_HCHxLEN(x) REG32(((USBFS) + LOCATE_HCHLEN(x))) /*!< host channel-x tranfer length register */ + +#define USB_DCFG REG32(((USBFS) + 0x0800U)) /*!< device configuration register */ +#define USB_DCTL REG32(((USBFS) + 0x0804U)) /*!< device control register */ +#define USB_DSTAT REG32(((USBFS) + 0x0808U)) /*!< device status register */ +#define USB_DIEPINTEN REG32(((USBFS) + 0x0810U)) /*!< device in endpoint common interrupt enable register */ +#define USB_DOEPINTEN REG32(((USBFS) + 0x0814U)) /*!< device out endpoint common interrupt enable register */ +#define USB_DAEPINT REG32(((USBFS) + 0x0818U)) /*!< device all endpoints interrupt register */ +#define USB_DAEPINTEN REG32(((USBFS) + 0x081CU)) /*!< device all endpoints interrupt enable register */ +#define USB_DVBUSDT REG32(((USBFS) + 0x0828U)) /*!< device vbus discharge time register */ +#define USB_DVBUSPT REG32(((USBFS) + 0x082CU)) /*!< device vbus pulsing time register */ +#define USB_DIEPFEINTEN REG32(((USBFS) + 0x0834U)) /*!< device in endpoint fifo empty interrupt enable register */ +#define USB_DEP1INT REG32(((USBFS) + 0x0838U)) /*!< device endpoint 1 interrupt register */ +#define USB_DEP1INTEN REG32(((USBFS) + 0x083CU)) /*!< device endpoint 1 interrupt enable register */ +#define USB_DIEP1INTEN REG32(((USBFS) + 0x0844U)) /*!< device in endpoint 1 interrupt enable register */ +#define USB_DOEP1INTEN REG32(((USBFS) + 0x0884U)) /*!< device out endpoint 1 interrupt enable register */ +#define USB_DIEP0CTL REG32(((USBFS) + 0x0900U)) /*!< device in endpoint 0 control register */ +#define USB_DIEP0LEN REG32(((USBFS) + 0x0910U)) /*!< device in endpoint 0 transfer length register */ +#define USB_DOEP0CTL REG32(((USBFS) + 0x0B00U)) /*!< device out endpoint 0 control register */ +#define USB_DOEP0LEN REG32(((USBFS) + 0x0B10U)) /*!< device out endpoint 0 transfer length register */ +#define USB_DIEPxCTL(x) REG32(((USBFS) + LOCATE_DIEPCTL(x))) /*!< device in endpoint-x control register */ +#define USB_DOEPxCTL(x) REG32(((USBFS) + LOCATE_DOEPCTL(x))) /*!< device out endpoint-x control register */ +#define USB_DIEPxINTF(x) REG32(((USBFS) + LOCATE_DIEPINTF(x))) /*!< device in endpoint-x interrupt flag register */ +#define USB_DOEPxINTF(x) REG32(((USBFS) + LOCATE_DOEPINTF(x))) /*!< device out endpoint-x interrupt flag register */ +#define USB_DIEPxLEN(x) REG32(((USBFS) + LOCATE_DIEPLEN(x))) /*!< device in endpoint-x transfer length register */ +#define USB_DOEPxLEN(x) REG32(((USBFS) + LOCATE_DOEPLEN(x))) /*!< device out endpoint-x transfer length register */ +#define USB_DIEPxTFSTAT(x) REG32(((USBFS) + LOCATE_DIEPxTFSTAT(x))) /*!< device in endpoint-x transmit fifo status register */ + +#define USB_PWRCLKCTL REG32(((USBFS) + 0x0E00U)) /*!< power and clock register */ + +#define USB_FIFO(x) (®32(((USBFS) + LOCATE_FIFO(x)))) /*!< fifo memory */ + +/* global OTG control and status register bits definitions */ +#define GOTGCS_BSV BIT(19) /*!< B-Session valid */ +#define GOTGCS_ASV BIT(18) /*!< A-session valid */ +#define GOTGCS_DI BIT(17) /*!< debounce interval */ +#define GOTGCS_IDPS BIT(16) /*!< id pin status */ +#define GOTGCS_DHNPEN BIT(11) /*!< device HNP enable */ +#define GOTGCS_HHNPEN BIT(10) /*!< host HNP enable */ +#define GOTGCS_HNPREQ BIT(9) /*!< HNP request */ +#define GOTGCS_HNPS BIT(8) /*!< HNP successes */ +#define GOTGCS_SRPREQ BIT(1) /*!< SRP request */ +#define GOTGCS_SRPS BIT(0) /*!< SRP successes */ + +/* global OTG interrupt flag register bits definitions */ +#define GOTGINTF_DF BIT(19) /*!< debounce finish */ +#define GOTGINTF_ADTO BIT(18) /*!< A-device timeout */ +#define GOTGINTF_HNPDET BIT(17) /*!< host negotiation request detected */ +#define GOTGINTF_HNPEND BIT(9) /*!< HNP end */ +#define GOTGINTF_SRPEND BIT(8) /*!< SRP end */ +#define GOTGINTF_SESEND BIT(2) /*!< session end */ + +/* global AHB control and status register bits definitions */ +#define GAHBCS_PTXFTH BIT(8) /*!< periodic tx fifo threshold */ +#define GAHBCS_TXFTH BIT(7) /*!< tx fifo threshold */ +#define GAHBCS_GINTEN BIT(0) /*!< global interrupt enable */ + +/* global USB control and status register bits definitions */ +#define GUSBCS_FDM BIT(30) /*!< force device mode */ +#define GUSBCS_FHM BIT(29) /*!< force host mode */ +#define GUSBCS_UTT BITS(10, 13) /*!< USB turnaround time */ +#define GUSBCS_HNPCEN BIT(9) /*!< HNP capability enable */ +#define GUSBCS_SRPCEN BIT(8) /*!< SRP capability enable */ +#define GUSBCS_TOC BITS(0, 2) /*!< timeout calibration */ + +/* global reset control register bits definitions */ +#define GRSTCTL_TXFNUM BITS(6, 10) /*!< tx fifo number */ +#define GRSTCTL_TXFF BIT(5) /*!< tx fifo flush */ +#define GRSTCTL_RXFF BIT(4) /*!< rx fifo flush */ +#define GRSTCTL_HFCRST BIT(2) /*!< host frame counter reset */ +#define GRSTCTL_HCSRST BIT(1) /*!< HCLK soft reset */ +#define GRSTCTL_CSRST BIT(0) /*!< core soft reset */ + +/* global interrupt flag register bits definitions */ +#define GINTF_WKUPIF BIT(31) /*!< wakeup interrupt flag */ +#define GINTF_SESIF BIT(30) /*!< session interrupt flag */ +#define GINTF_DISCIF BIT(29) /*!< disconnect interrupt flag */ +#define GINTF_IDPSC BIT(28) /*!< id pin status change */ +#define GINTF_PTXFEIF BIT(26) /*!< periodic tx fifo empty interrupt flag */ +#define GINTF_HCIF BIT(25) /*!< host channels interrupt flag */ +#define GINTF_HPIF BIT(24) /*!< host port interrupt flag */ +#define GINTF_PXNCIF BIT(21) /*!< periodic transfer not complete interrupt flag */ +#define GINTF_ISOONCIF BIT(21) /*!< isochronous out transfer not complete interrupt flag */ +#define GINTF_ISOINCIF BIT(20) /*!< isochronous in transfer not complete interrupt flag */ +#define GINTF_OEPIF BIT(19) /*!< out endpoint interrupt flag */ +#define GINTF_IEPIF BIT(18) /*!< in endpoint interrupt flag */ +#define GINTF_EOPFIF BIT(15) /*!< end of periodic frame interrupt flag */ +#define GINTF_ISOOPDIF BIT(14) /*!< isochronous out packet dropped interrupt flag */ +#define GINTF_ENUMF BIT(13) /*!< enumeration finished */ +#define GINTF_RST BIT(12) /*!< USB reset */ +#define GINTF_SP BIT(11) /*!< USB suspend */ +#define GINTF_ESP BIT(10) /*!< early suspend */ +#define GINTF_GONAK BIT(7) /*!< global out NAK effective */ +#define GINTF_GNPINAK BIT(6) /*!< global in non-periodic NAK effective */ +#define GINTF_NPTXFEIF BIT(5) /*!< non-periodic tx fifo empty interrupt flag */ +#define GINTF_RXFNEIF BIT(4) /*!< rx fifo non-empty interrupt flag */ +#define GINTF_SOF BIT(3) /*!< start of frame */ +#define GINTF_OTGIF BIT(2) /*!< OTG interrupt flag */ +#define GINTF_MFIF BIT(1) /*!< mode fault interrupt flag */ +#define GINTF_COPM BIT(0) /*!< current operation mode */ + +/* global interrupt enable register bits definitions */ +#define GINTEN_WKUPIE BIT(31) /*!< wakeup interrupt enable */ +#define GINTEN_SESIE BIT(30) /*!< session interrupt enable */ +#define GINTEN_DISCIE BIT(29) /*!< disconnect interrupt enable */ +#define GINTEN_IDPSCIE BIT(28) /*!< id pin status change interrupt enable */ +#define GINTEN_PTXFEIE BIT(26) /*!< periodic tx fifo empty interrupt enable */ +#define GINTEN_HCIE BIT(25) /*!< host channels interrupt enable */ +#define GINTEN_HPIE BIT(24) /*!< host port interrupt enable */ +#define GINTEN_PXNCIE BIT(21) /*!< periodic transfer not complete interrupt enable */ +#define GINTEN_ISOONCIE BIT(21) /*!< isochronous out transfer not complete interrupt enable */ +#define GINTEN_ISOINCIE BIT(20) /*!< isochronous in transfer not complete interrupt enable */ +#define GINTEN_OEPIE BIT(19) /*!< out endpoints interrupt enable */ +#define GINTEN_IEPIE BIT(18) /*!< in endpoints interrupt enable */ +#define GINTEN_EOPFIE BIT(15) /*!< end of periodic frame interrupt enable */ +#define GINTEN_ISOOPDIE BIT(14) /*!< isochronous out packet dropped interrupt enable */ +#define GINTEN_ENUMFIE BIT(13) /*!< enumeration finish enable */ +#define GINTEN_RSTIE BIT(12) /*!< USB reset interrupt enable */ +#define GINTEN_SPIE BIT(11) /*!< USB suspend interrupt enable */ +#define GINTEN_ESPIE BIT(10) /*!< early suspend interrupt enable */ +#define GINTEN_GONAKIE BIT(7) /*!< global out NAK effective interrupt enable */ +#define GINTEN_GNPINAKIE BIT(6) /*!< global non-periodic in NAK effective interrupt enable */ +#define GINTEN_NPTXFEIE BIT(5) /*!< non-periodic tx fifo empty interrupt enable */ +#define GINTEN_RXFNEIE BIT(4) /*!< receive fifo non-empty interrupt enable */ +#define GINTEN_SOFIE BIT(3) /*!< start of frame interrupt enable */ +#define GINTEN_OTGIE BIT(2) /*!< OTG interrupt enable */ +#define GINTEN_MFIE BIT(1) /*!< mode fault interrupt enable */ + +/* global receive status read and pop register bits definitions */ +#define GRSTATRP_RPCKST BITS(17, 20) /*!< received packet status */ +#define GRSTATRP_DPID BITS(15, 16) /*!< data PID */ +#define GRSTATRP_BCOUNT BITS(4, 14) /*!< byte count */ +#define GRSTATRP_CNUM BITS(0, 3) /*!< channel number */ +#define GRSTATRP_EPNUM BITS(0, 3) /*!< endpoint number */ + +/* global receive fifo length register bits definitions */ +#define GRFLEN_RXFD BITS(0, 15) /*!< rx fifo depth */ + +/* host non-periodic transmit fifo length register bits definitions */ +#define HNPTFLEN_HNPTXFD BITS(16, 31) /*!< non-periodic tx fifo depth */ +#define HNPTFLEN_HNPTXRSAR BITS(0, 15) /*!< non-periodic tx RAM start address */ + +/* IN endpoint 0 transmit fifo length register bits definitions */ +#define DIEP0TFLEN_IEP0TXFD BITS(16, 31) /*!< in endpoint 0 tx fifo depth */ +#define DIEP0TFLEN_IEP0TXRSAR BITS(0, 15) /*!< in endpoint 0 tx RAM start address */ + +/* host non-periodic transmit fifo/queue status register bits definitions */ +#define HNPTFQSTAT_NPTXRQTOP BITS(24, 30) /*!< top entry of the non-periodic tx request queue */ +#define HNPTFQSTAT_NPTXRQS BITS(16, 23) /*!< non-periodic tx request queue space */ +#define HNPTFQSTAT_NPTXFS BITS(0, 15) /*!< non-periodic tx fifo space */ +#define HNPTFQSTAT_CNUM BITS(27, 30) /*!< channel number*/ +#define HNPTFQSTAT_EPNUM BITS(27, 30) /*!< endpoint number */ +#define HNPTFQSTAT_TYPE BITS(25, 26) /*!< token type */ +#define HNPTFQSTAT_TMF BIT(24) /*!< terminate flag */ + +/* global core configuration register bits definitions */ +#define GCCFG_VBUSIG BIT(21) /*!< vbus ignored */ +#define GCCFG_SOFOEN BIT(20) /*!< SOF output enable */ +#define GCCFG_VBUSBCEN BIT(19) /*!< the VBUS B-device comparer enable */ +#define GCCFG_VBUSACEN BIT(18) /*!< the VBUS A-device comparer enable */ +#define GCCFG_PWRON BIT(16) /*!< power on */ + +/* core ID register bits definitions */ +#define CID_CID BITS(0, 31) /*!< core ID */ + +/* host periodic transmit fifo length register bits definitions */ +#define HPTFLEN_HPTXFD BITS(16, 31) /*!< host periodic tx fifo depth */ +#define HPTFLEN_HPTXFSAR BITS(0, 15) /*!< host periodic tx RAM start address */ + +/* device in endpoint transmit fifo length register bits definitions */ +#define DIEPTFLEN_IEPTXFD BITS(16, 31) /*!< in endpoint tx fifo x depth */ +#define DIEPTFLEN_IEPTXRSAR BITS(0, 15) /*!< in endpoint fifox tx x RAM start address */ + +/* host control register bits definitions */ +#define HCTL_CLKSEL BITS(0, 1) /*!< clock select for USB clock */ + +/* host frame interval register bits definitions */ +#define HFT_FRI BITS(0, 15) /*!< frame interval */ + +/* host frame information remaining register bits definitions */ +#define HFINFR_FRT BITS(16, 31) /*!< frame remaining time */ +#define HFINFR_FRNUM BITS(0, 15) /*!< frame number */ + +/* host periodic transmit fifo/queue status register bits definitions */ +#define HPTFQSTAT_PTXREQT BITS(24, 31) /*!< top entry of the periodic tx request queue */ +#define HPTFQSTAT_PTXREQS BITS(16, 23) /*!< periodic tx request queue space */ +#define HPTFQSTAT_PTXFS BITS(0, 15) /*!< periodic tx fifo space */ +#define HPTFQSTAT_OEFRM BIT(31) /*!< odd/eveb frame */ +#define HPTFQSTAT_CNUM BITS(27, 30) /*!< channel number */ +#define HPTFQSTAT_EPNUM BITS(27, 30) /*!< endpoint number */ +#define HPTFQSTAT_TYPE BITS(25, 26) /*!< token type */ +#define HPTFQSTAT_TMF BIT(24) /*!< terminate flag */ + +/* host all channels interrupt register bits definitions */ +#define HACHINT_HACHINT BITS(0, 7) /*!< host all channel interrupts */ + +/* host all channels interrupt enable register bits definitions */ +#define HACHINTEN_CINTEN BITS(0, 7) /*!< channel interrupt enable */ + +/* host port control and status register bits definitions */ +#define HPCS_PS BITS(17, 18) /*!< port speed */ +#define HPCS_PP BIT(12) /*!< port power */ +#define HPCS_PLST BITS(10, 11) /*!< port line status */ +#define HPCS_PRST BIT(8) /*!< port reset */ +#define HPCS_PSP BIT(7) /*!< port suspend */ +#define HPCS_PREM BIT(6) /*!< port resume */ +#define HPCS_PEDC BIT(3) /*!< port enable/disable change */ +#define HPCS_PE BIT(2) /*!< port enable */ +#define HPCS_PCD BIT(1) /*!< port connect detected */ +#define HPCS_PCST BIT(0) /*!< port connect status */ + +/* host channel-x control register bits definitions */ +#define HCHCTL_CEN BIT(31) /*!< channel enable */ +#define HCHCTL_CDIS BIT(30) /*!< channel disable */ +#define HCHCTL_ODDFRM BIT(29) /*!< odd frame */ +#define HCHCTL_DAR BITS(22, 28) /*!< device address */ +#define HCHCTL_MPC BITS(20, 21) /*!< multiple packet count */ +#define HCHCTL_EPTYPE BITS(18, 19) /*!< endpoint type */ +#define HCHCTL_LSD BIT(17) /*!< low-speed device */ +#define HCHCTL_EPDIR BIT(15) /*!< endpoint direction */ +#define HCHCTL_EPNUM BITS(11, 14) /*!< endpoint number */ +#define HCHCTL_MPL BITS(0, 10) /*!< maximum packet length */ + +/* host channel-x interrupt flag register bits definitions */ +#define HCHINTF_DTER BIT(10) /*!< data toggle error */ +#define HCHINTF_REQOVR BIT(9) /*!< request queue overrun */ +#define HCHINTF_BBER BIT(8) /*!< babble error */ +#define HCHINTF_USBER BIT(7) /*!< USB bus Error */ +#define HCHINTF_NYET BIT(6) /*!< NYET */ +#define HCHINTF_ACK BIT(5) /*!< ACK */ +#define HCHINTF_NAK BIT(4) /*!< NAK */ +#define HCHINTF_STALL BIT(3) /*!< STALL */ +#define HCHINTF_CH BIT(1) /*!< channel halted */ +#define HCHINTF_TF BIT(0) /*!< transfer finished */ + +/* host channel-x interrupt enable register bits definitions */ +#define HCHINTEN_DTERIE BIT(10) /*!< data toggle error interrupt enable */ +#define HCHINTEN_REQOVRIE BIT(9) /*!< request queue overrun interrupt enable */ +#define HCHINTEN_BBERIE BIT(8) /*!< babble error interrupt enable */ +#define HCHINTEN_USBERIE BIT(7) /*!< USB bus error interrupt enable */ +#define HCHINTEN_NYETIE BIT(6) /*!< NYET interrupt enable */ +#define HCHINTEN_ACKIE BIT(5) /*!< ACK interrupt enable */ +#define HCHINTEN_NAKIE BIT(4) /*!< NAK interrupt enable */ +#define HCHINTEN_STALLIE BIT(3) /*!< STALL interrupt enable */ +#define HCHINTEN_CHIE BIT(1) /*!< channel halted interrupt enable */ +#define HCHINTEN_TFIE BIT(0) /*!< transfer finished interrupt enable */ + +/* host channel-x transfer length register bits definitions */ +#define HCHLEN_DPID BITS(29, 30) /*!< data PID */ +#define HCHLEN_PCNT BITS(19, 28) /*!< packet count */ +#define HCHLEN_TLEN BITS(0, 18) /*!< transfer length */ + +/* device control and status registers */ +/* device configuration registers bits definitions */ +#define DCFG_EOPFT BITS(11, 12) /*!< end of periodic frame time */ +#define DCFG_DAR BITS(4, 10) /*!< device address */ +#define DCFG_NZLSOH BIT(2) /*!< non-zero-length status out handshake */ +#define DCFG_DS BITS(0, 1) /*!< device speed */ + +/* device control registers bits definitions */ +#define DCTL_POIF BIT(11) /*!< power-on initialization finished */ +#define DCTL_CGONAK BIT(10) /*!< clear global out NAK */ +#define DCTL_SGONAK BIT(9) /*!< set global out NAK */ +#define DCTL_CGINAK BIT(8) /*!< clear global in NAK */ +#define DCTL_SGINAK BIT(7) /*!< set global in NAK */ +#define DCTL_GONS BIT(3) /*!< global out NAK status */ +#define DCTL_GINS BIT(2) /*!< global in NAK status */ +#define DCTL_SD BIT(1) /*!< soft disconnect */ +#define DCTL_RWKUP BIT(0) /*!< remote wakeup */ + +/* device status registers bits definitions */ +#define DSTAT_FNRSOF BITS(8, 21) /*!< the frame number of the received SOF. */ +#define DSTAT_ES BITS(1, 2) /*!< enumerated speed */ +#define DSTAT_SPST BIT(0) /*!< suspend status */ + +/* device in endpoint common interrupt enable registers bits definitions */ +#define DIEPINTEN_TXFEEN BIT(7) /*!< transmit fifo empty interrupt enable bit */ +#define DIEPINTEN_IEPNEEN BIT(6) /*!< in endpoint NAK effective interrupt enable bit */ +#define DIEPINTEN_EPTXFUDEN BIT(4) /*!< endpoint tx fifo underrun interrupt enable bit */ +#define DIEPINTEN_CITOEN BIT(3) /*!< control in timeout interrupt enable bit */ +#define DIEPINTEN_EPDISEN BIT(1) /*!< endpoint disabled interrupt enable bit */ +#define DIEPINTEN_TFEN BIT(0) /*!< transfer finished interrupt enable bit */ + +/* device out endpoint common interrupt enable registers bits definitions */ +#define DOEPINTEN_BTBSTPEN BIT(6) /*!< back-to-back setup packets interrupt enable bit */ +#define DOEPINTEN_EPRXFOVREN BIT(4) /*!< endpoint rx fifo overrun interrupt enable bit */ +#define DOEPINTEN_STPFEN BIT(3) /*!< fifo phase finished interrupt enable bit */ +#define DOEPINTEN_EPDISEN BIT(1) /*!< endpoint disabled interrupt enable bit */ +#define DOEPINTEN_TFEN BIT(0) /*!< transfer finished interrupt enable bit */ + +/* device all endpoints interrupt registers bits definitions */ +#define DAEPINT_OEPITB BITS(16, 21) /*!< device all out endpoint interrupt bits */ +#define DAEPINT_IEPITB BITS(0, 5) /*!< device all in endpoint interrupt bits */ + +/* device all endpoints interrupt enable registers bits definitions */ +#define DAEPINTEN_OEPIE BITS(16, 21) /*!< out endpoint interrupt enable */ +#define DAEPINTEN_IEPIE BITS(0, 3) /*!< in endpoint interrupt enable */ + +/* device Vbus discharge time registers bits definitions */ +#define DVBUSDT_DVBUSDT BITS(0, 15) /*!< device VBUS discharge time */ + +/* device Vbus pulsing time registers bits definitions */ +#define DVBUSPT_DVBUSPT BITS(0, 11) /*!< device VBUS pulsing time */ + +/* device IN endpoint FIFO empty interrupt enable register bits definitions */ +#define DIEPFEINTEN_IEPTXFEIE BITS(0, 3) /*!< in endpoint tx FIFO empty interrupt enable bits */ + +/* device endpoint 0 control register bits definitions */ +#define DEP0CTL_EPEN BIT(31) /*!< endpoint enable */ +#define DEP0CTL_EPD BIT(30) /*!< endpoint disable */ +#define DEP0CTL_SNAK BIT(27) /*!< set NAK */ +#define DEP0CTL_CNAK BIT(26) /*!< clear NAK */ +#define DIEP0CTL_TXFNUM BITS(22, 25) /*!< tx FIFO number */ +#define DEP0CTL_STALL BIT(21) /*!< STALL handshake */ +#define DEP0CTL_EPTYPE BITS(18, 19) /*!< endpoint type */ +#define DEP0CTL_NAKS BIT(17) /*!< NAK status */ +#define DEP0CTL_EPACT BIT(15) /*!< endpoint active */ +#define DEP0CTL_MPL BITS(0, 1) /*!< maximum packet length */ + +/* device endpoint x control register bits definitions */ +#define DEPCTL_EPEN BIT(31) /*!< endpoint enable */ +#define DEPCTL_EPD BIT(30) /*!< endpoint disable */ +#define DEPCTL_SODDFRM BIT(29) /*!< set odd frame */ +#define DEPCTL_SD1PID BIT(29) /*!< set DATA1 PID */ +#define DEPCTL_SEVNFRM BIT(28) /*!< set even frame */ +#define DEPCTL_SD0PID BIT(28) /*!< set DATA0 PID */ +#define DEPCTL_SNAK BIT(27) /*!< set NAK */ +#define DEPCTL_CNAK BIT(26) /*!< clear NAK */ +#define DIEPCTL_TXFNUM BITS(22, 25) /*!< tx FIFO number */ +#define DEPCTL_STALL BIT(21) /*!< STALL handshake */ +#define DEPCTL_EPTYPE BITS(18, 19) /*!< endpoint type */ +#define DEPCTL_NAKS BIT(17) /*!< NAK status */ +#define DEPCTL_EOFRM BIT(16) /*!< even/odd frame */ +#define DEPCTL_DPID BIT(16) /*!< endpoint data PID */ +#define DEPCTL_EPACT BIT(15) /*!< endpoint active */ +#define DEPCTL_MPL BITS(0, 10) /*!< maximum packet length */ + +/* device in endpoint-x interrupt flag register bits definitions */ +#define DIEPINTF_TXFE BIT(7) /*!< transmit fifo empty */ +#define DIEPINTF_IEPNE BIT(6) /*!< in endpoint NAK effective */ +#define DIEPINTF_EPTXFUD BIT(4) /*!< endpoint tx fifo underrun */ +#define DIEPINTF_CITO BIT(3) /*!< control in Timeout interrupt */ +#define DIEPINTF_EPDIS BIT(1) /*!< endpoint disabled */ +#define DIEPINTF_TF BIT(0) /*!< transfer finished */ + +/* device out endpoint-x interrupt flag register bits definitions */ +#define DOEPINTF_BTBSTP BIT(6) /*!< back-to-back setup packets */ +#define DOEPINTF_EPRXFOVR BIT(4) /*!< endpoint rx fifo overrun */ +#define DOEPINTF_STPF BIT(3) /*!< setup phase finished */ +#define DOEPINTF_EPDIS BIT(1) /*!< endpoint disabled */ +#define DOEPINTF_TF BIT(0) /*!< transfer finished */ + +/* device in endpoint 0 transfer length register bits definitions */ +#define DIEP0LEN_PCNT BITS(19, 20) /*!< packet count */ +#define DIEP0LEN_TLEN BITS(0, 6) /*!< transfer length */ + +/* device out endpoint 0 transfer length register bits definitions */ +#define DOEP0LEN_STPCNT BITS(29, 30) /*!< setup packet count */ +#define DOEP0LEN_PCNT BIT(19) /*!< packet count */ +#define DOEP0LEN_TLEN BITS(0, 6) /*!< transfer length */ + +/* device out endpoint-x transfer length register bits definitions */ +#define DOEPLEN_RXDPID BITS(29, 30) /*!< received data PID */ +#define DOEPLEN_STPCNT BITS(29, 30) /*!< setup packet count */ +#define DIEPLEN_MCNT BITS(29, 30) /*!< multi count */ +#define DEPLEN_PCNT BITS(19, 28) /*!< packet count */ +#define DEPLEN_TLEN BITS(0, 18) /*!< transfer length */ + +/* device in endpoint-x transmit fifo status register bits definitions */ +#define DIEPTFSTAT_IEPTFS BITS(0, 15) /*!< in endpoint¡¯s tx fifo space remaining */ + +/* USB power and clock registers bits definition */ +#define PWRCLKCTL_SHCLK BIT(1) /*!< stop HCLK */ +#define PWRCLKCTL_SUCLK BIT(0) /*!< stop the USB clock */ + +/* register options defines */ +#define DCFG_DEVSPEED(regval) (DCFG_DS & ((regval) << 0U)) /*!< device speed configuration */ + +#define USB_SPEED_EXP_HIGH DCFG_DEVSPEED(0U) /*!< device external PHY high speed */ +#define USB_SPEED_EXP_FULL DCFG_DEVSPEED(1U) /*!< device external PHY full speed */ +#define USB_SPEED_INP_FULL DCFG_DEVSPEED(3U) /*!< device internal PHY full speed */ + +#define GAHBCS_TFEL(regval) (GAHBCS_TXFTH & ((regval) << 7U)) /*!< device speed configuration */ + +#define TXFIFO_EMPTY_HALF GAHBCS_TFEL(0U) /*!< tx fifo half empty */ +#define TXFIFO_EMPTY GAHBCS_TFEL(1U) /*!< tx fifo completely empty */ + +#define GAHBCS_DMAINCR(regval) (GAHBCS_BURST & ((regval) << 1U)) /*!< AHB burst type used by DMA*/ + +#define DMA_INCR0 GAHBCS_DMAINCR(0U) /*!< single burst type used by DMA*/ +#define DMA_INCR1 GAHBCS_DMAINCR(1U) /*!< 4-beat incrementing burst type used by DMA*/ +#define DMA_INCR4 GAHBCS_DMAINCR(3U) /*!< 8-beat incrementing burst type used by DMA*/ +#define DMA_INCR8 GAHBCS_DMAINCR(5U) /*!< 16-beat incrementing burst type used by DMA*/ +#define DMA_INCR16 GAHBCS_DMAINCR(7U) /*!< 32-beat incrementing burst type used by DMA*/ + +#define DCFG_PFRI(regval) (DCFG_EOPFT & ((regval) << 11U)) /*!< end of periodic frame time configuration */ + +#define FRAME_INTERVAL_80 DCFG_PFRI(0U) /*!< 80% of the frame time */ +#define FRAME_INTERVAL_85 DCFG_PFRI(1U) /*!< 85% of the frame time */ +#define FRAME_INTERVAL_90 DCFG_PFRI(2U) /*!< 90% of the frame time */ +#define FRAME_INTERVAL_95 DCFG_PFRI(3U) /*!< 95% of the frame time */ + +#define DEP0_MPL(regval) (DEP0CTL_MPL & ((regval) << 0U)) /*!< maximum packet length configuration */ + +#define EP0MPL_64 DEP0_MPL(0U) /*!< maximum packet length 64 bytes */ +#define EP0MPL_32 DEP0_MPL(1U) /*!< maximum packet length 32 bytes */ +#define EP0MPL_16 DEP0_MPL(2U) /*!< maximum packet length 16 bytes */ +#define EP0MPL_8 DEP0_MPL(3U) /*!< maximum packet length 8 bytes */ + +/* endpoints address */ + +/* first bit is direction(0 for Rx and 1 for Tx) */ +#define EP0_OUT ((uint8_t)0x00U) /*!< endpoint out 0 */ +#define EP0_IN ((uint8_t)0x80U) /*!< endpoint in 0 */ +#define EP1_OUT ((uint8_t)0x01U) /*!< endpoint out 1 */ +#define EP1_IN ((uint8_t)0x81U) /*!< endpoint in 1 */ +#define EP2_OUT ((uint8_t)0x02U) /*!< endpoint out 2 */ +#define EP2_IN ((uint8_t)0x82U) /*!< endpoint in 2 */ +#define EP3_OUT ((uint8_t)0x03U) /*!< endpoint out 3 */ +#define EP3_IN ((uint8_t)0x83U) /*!< endpoint in 3 */ + +/* enable global interrupt */ +#define USB_GLOBAL_INT_ENABLE() (USB_GAHBCS |= GAHBCS_GINTEN) + +/* disable global interrupt */ +#define USB_GLOBAL_INT_DISABLE() (USB_GAHBCS &= ~GAHBCS_GINTEN) + +/* get current operation mode */ +#define USB_CURRENT_MODE_GET() (USB_GINTF & GINTF_COPM) + +/* read global interrupt flag */ +#define USB_CORE_INTR_READ(x) \ +do { \ + uint32_t global_intf = USB_GINTF; \ + (x) = global_intf & USB_GINTEN; \ +} while(0) + +/* read global interrupt flag */ +#define USB_DAOEP_INTR_READ(x) \ +do { \ + uint32_t dev_all_ep_inten = USB_DAEPINTEN; \ + uint32_t dev_all_ep_int = USB_DAEPINT; \ + uint32_t out_ep_intb = DAEPINT_OEPITB; \ + (x) = (dev_all_ep_inten & dev_all_ep_int & out_ep_intb) >> 16; \ +} while(0) + +/* read out endpoint-x interrupt flag */ +#define USB_DOEP_INTR_READ(x, EpID) \ +do { \ + uint32_t out_epintf = USB_DOEPxINTF(EpID); \ + (x) = out_epintf & USB_DOEPINTEN; \ +} while(0) + +/* read all in endpoint interrupt flag */ +#define USB_DAIEP_INTR_READ(x) \ +do { \ + uint32_t dev_all_ep_inten = USB_DAEPINTEN; \ + uint32_t dev_all_ep_int = USB_DAEPINT; \ + uint32_t in_ep_intb = DAEPINT_IEPITB; \ + (x) = dev_all_ep_inten & dev_all_ep_int & in_ep_intb; \ +} while(0) + + +/* read in endpoint-x interrupt flag */ +#define USB_DIEP_INTR_READ(x, EpID) \ +do { \ + uint32_t dev_ep_intf = USB_DIEPxINTF(EpID); \ + uint32_t dev_ep_fifoempty_intf = (((USB_DIEPFEINTEN >> (EpID)) & 0x1U) << 7U); \ + uint32_t dev_inep_inten = USB_DIEPINTEN; \ + (x) = dev_ep_intf & (dev_ep_fifoempty_intf | dev_inep_inten); \ +} while(0) + +/* generate remote wakup signal */ +#define USB_REMOTE_WAKEUP_SET() (USB_DCTL |= DCTL_RWKUP) + +/* no remote wakup signal generate */ +#define USB_REMOTE_WAKEUP_RESET() (USB_DCTL &= ~DCTL_RWKUP) + +/* generate soft disconnect */ +#define USB_SOFT_DISCONNECT_ENABLE() (USB_DCTL |= DCTL_SD) + +/* no soft disconnect generate */ +#define USB_SOFT_DISCONNECT_DISABLE() (USB_DCTL &= ~DCTL_SD) + +/* set device address */ +#define USB_SET_DEVADDR(DevAddr) (USB_DCFG |= (DevAddr) << 4U) + +/* check whether frame is even */ +#define USB_EVEN_FRAME() (!(USB_HFINFR & 0x01U)) + +/* read port status */ +#define USB_PORT_READ() (USB_HPCS & (~HPCS_PE) & (~HPCS_PCD) & (~HPCS_PEDC)) + +/* usb clock initialize */ +#define USB_FSLSCLOCK_INIT(ClockFreq) \ +do { \ + USB_HCTL &= ~HCTL_CLKSEL; \ + USB_HCTL |= ClockFreq; \ +} while(0) + +/* get usb current speed */ +#define USB_CURRENT_SPEED_GET() ((USB_HPCS & HPCS_PS) >> 17) + +/* get usb current frame */ +#define USB_CURRENT_FRAME_GET() (USB_HFINFR & 0xFFFFU) + +#endif /* USB_REGS_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_std.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_std.h new file mode 100644 index 0000000000000000000000000000000000000000..d82cb74f85759e4b0b8768bdf810ebca83d9619d --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_std.h @@ -0,0 +1,216 @@ +/*! + \file usb_std.h + \brief USB 2.0 standard defines + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USB_STD_H +#define USB_STD_H + +#include "usb_conf.h" + +/* constants definitions */ +#define USB_DEV_QUALIFIER_DESC_LEN 0x0AU /*!< USB device qualifier descriptor length */ +#define USB_DEV_DESC_LEN 0x12U /*!< USB device descriptor length */ +#define USB_CFG_DESC_LEN 0x09U /*!< USB device configuration descriptor length */ +#define USB_IF_DESC_LEN 0x09U /*!< USB device interface descriptor length */ +#define USB_EP_DESC_LEN 0x07U /*!< USB device endpoint descriptor length */ +#define USB_OTG_DESC_LEN 0x03U /*!< USB device OTG descriptor length */ + +/* bit 7 of bmRequestType: data phase transfer direction */ +#define USB_DIR_MASK 0x80U /*!< USB transfer direction mask */ +#define USB_DIR_OUT 0x00U /*!< USB transfer out direction */ +#define USB_DIR_IN 0x80U /*!< USB transfer in direction */ + +/* bit 6..5 of bmRequestType: request type */ +#define USB_STANDARD_REQ 0x00U /*!< USB standard request */ +#define USB_CLASS_REQ 0x20U /*!< USB class request */ +#define USB_VENDOR_REQ 0x40U /*!< USB vebdor request */ +#define USB_REQ_MASK 0x60U /*!< USB request mask */ + +/* bit 4..0 of bmRequestType: recipient type */ +#define USB_REQTYPE_DEVICE 0x00U /*!< USB device request type */ +#define USB_REQTYPE_INTERFACE 0x01U /*!< USB interface request type*/ +#define USB_REQTYPE_ENDPOINT 0x02U /*!< USB endpoint request type*/ +#define USB_REQTYPE_MASK 0x03U /*!< USB request type mask*/ + +/* bRequest value */ +#define USBREQ_GET_STATUS 0x00U /*!< USB get status request*/ +#define USBREQ_CLEAR_FEATURE 0x01U /*!< USB clear feature request*/ +#define USBREQ_SET_FEATURE 0x03U /*!< USB set feature request*/ +#define USBREQ_SET_ADDRESS 0x05U /*!< USB set address request*/ +#define USBREQ_GET_DESCRIPTOR 0x06U /*!< USB get descriptor request*/ +#define USBREQ_SET_DESCRIPTOR 0x07U /*!< USB set descriptor request*/ +#define USBREQ_GET_CONFIGURATION 0x08U /*!< USB get configuration request*/ +#define USBREQ_SET_CONFIGURATION 0x09U /*!< USB set configuration request*/ +#define USBREQ_GET_INTERFACE 0x0AU /*!< USB get interface request*/ +#define USBREQ_SET_INTERFACE 0x0BU /*!< USB set interface request*/ +#define USBREQ_SYNCH_FRAME 0x0CU /*!< USB synchronize frame request*/ + +/* descriptor types of usb specifications */ +#define USB_DESCTYPE_DEVICE 0x01U /*!< USB device descriptor type*/ +#define USB_DESCTYPE_CONFIGURATION 0x02U /*!< USB configuration descriptor type*/ +#define USB_DESCTYPE_STRING 0x03U /*!< USB string descriptor type*/ +#define USB_DESCTYPE_INTERFACE 0x04U /*!< USB interface descriptor type*/ +#define USB_DESCTYPE_ENDPOINT 0x05U /*!< USB endpoint descriptor type*/ +#define USB_DESCTYPE_DEVICE_QUALIFIER 0x06U /*!< USB device qualtfier descriptor type*/ +#define USB_DESCTYPE_OTHER_SPEED_CONFIGURATION 0x07U /*!< USB other speed configuration descriptor type*/ +#define USB_DESCTYPE_INTERFACE_POWER 0x08U /*!< USB interface power descriptor type*/ + +#define USB_DESCTYPE_HID 0x21U /*!< USB HID descriptor type*/ +#define USB_DESCTYPE_HID_REPORT 0x22U /*!< USB HID report descriptor type*/ + +#define USB_DEVDESC_SIZE 18U /*!< USB device descriptor size*/ +#define USB_CFGDESC_SIZE 9U /*!< USB configure descriptor size*/ +#define USB_INTDESC_SIZE 9U /*!< USB interface descriptor size*/ +#define USB_EPDESC_SIZE 7U /*!< USB endpoint descriptor size*/ + +/* descriptor type and descriptor index */ +/* use the following values when USB host need to get descriptor */ +#define USB_DEVDESC ((USB_DESCTYPE_DEVICE << 8U) & 0xFF00U) /*!< USB device operation marco */ +#define USB_CFGDESC ((USB_DESCTYPE_CONFIGURATION << 8U) & 0xFF00U) /*!< USB configuration operation marco */ +#define USB_STRDESC ((USB_DESCTYPE_STRING << 8U) & 0xFF00U) /*!< USB string operation marco */ +#define USB_INTDESC ((USB_DESCTYPE_INTERFACE << 8U) & 0xFF00U) /*!< USB interface operation marco */ +#define USB_EPDESC ((USB_DESCTYPE_INTERFACE << 8U) & 0xFF00U) /*!< USB endpoint operation marco */ +#define USB_DEVQUADESC ((USB_DESCTYPE_DEVICE_QUALIFIER << 8U) & 0xFF00U) /*!< USB device qualifier operation marco */ +#define USB_OSPCFGDESC ((USB_DESCTYPE_OTHER_SPEED_CONFIGURATION << 8U) & 0xFF00U) /*!< USB other speed configuration operation marco */ +#define USB_INTPWRDESC ((USB_DESCTYPE_INTERFACE_POWER << 8U) & 0xFF00U) /*!< USB interface power operation marco */ +#define USB_HIDREPDESC ((USB_DESCTYPE_HID_REPORT << 8U) & 0xFF00U) /*!< USB HID report operation marco */ +#define USB_HIDDESC ((USB_DESCTYPE_HID << 8U) & 0xFF00U) /*!< USB HID operation marco */ + +#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \ + (uint16_t)(((uint16_t)(*(((uint8_t *)(addr)) + 1U))) << 8U)) + +/* supported classes */ +#define USB_MSC_CLASS 0x08U /*!< USB MSC class*/ +#define USB_HID_CLASS 0x03U /*!< USB HID class*/ + +/* interface descriptor field values for hid boot protocol */ +#define HID_BOOT_CODE 0x01U /*!< USB HID boot code*/ +#define HID_KEYBRD_BOOT_CODE 0x01U /*!< USB HID keyboard boot code*/ +#define HID_MOUSE_BOOT_CODE 0x02U /*!< USB HID mouse boot code*/ + +/* as per usb specs 9.2.6.4 :standard request with data request timeout: 5sec + standard request with no data stage timeout : 50ms */ +#define DATA_STAGE_TIMEOUT 5000U /*!< USB data stage timeout*/ +#define NODATA_STAGE_TIMEOUT 50U /*!< USB no data stage timeout*/ + +#define USBH_CFG_DESC_SET_SIZE (USB_CFGDESC_SIZE + USB_INTDESC_SIZE \ + + (USBH_MAX_EP_NUM * USB_EPDESC_SIZE)) /*!< USB host set configuration descriptor size */ + +#pragma pack(1) + +typedef union +{ + uint8_t data[8]; + + struct _setup_packet_struct + { + uint8_t bmRequestType; /*!< type of request */ + uint8_t bRequest; /*!< request of setup packet */ + uint16_t wValue; /*!< value of setup packet */ + uint16_t wIndex; /*!< index of setup packet */ + uint16_t wLength; /*!< length of setup packet */ + } b; +}usb_setup_union; + +typedef struct +{ + uint8_t bLength; /*!< size of the descriptor */ + uint8_t bDescriptorType; /*!< type of the descriptor */ +} usb_descriptor_header_struct; + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */ + + uint16_t bcdUSB; /*!< BCD of the supported USB specification */ + uint8_t bDeviceClass; /*!< USB device class */ + uint8_t bDeviceSubClass; /*!< USB device subclass */ + uint8_t bDeviceProtocol; /*!< USB device protocol */ + uint8_t bMaxPacketSize0; /*!< size of the control (address 0) endpoint's bank in bytes */ + uint16_t idVendor; /*!< vendor ID for the USB product */ + uint16_t idProduct; /*!< unique product ID for the USB product */ + uint16_t bcdDevice; /*!< product release (version) number */ + uint8_t iManufacturer; /*!< string index for the manufacturer's name */ + uint8_t iProduct; /*!< string index for the product name/details */ + uint8_t iSerialNumber; /*!< string index for the product's globally unique hexadecimal serial number */ + uint8_t bNumberConfigurations; /*!< total number of configurations supported by the device */ +} usb_descriptor_device_struct; + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */ + + uint16_t wTotalLength; /*!< size of the configuration descriptor header,and all sub descriptors inside the configuration */ + uint8_t bNumInterfaces; /*!< total number of interfaces in the configuration */ + uint8_t bConfigurationValue; /*!< configuration index of the current configuration */ + uint8_t iConfiguration; /*!< index of a string descriptor describing the configuration */ + uint8_t bmAttributes; /*!< configuration attributes */ + uint8_t bMaxPower; /*!< maximum power consumption of the device while in the current configuration */ +} usb_descriptor_configuration_struct; + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */ + + uint8_t bInterfaceNumber; /*!< index of the interface in the current configuration */ + uint8_t bAlternateSetting; /*!< alternate setting for the interface number */ + uint8_t bNumEndpoints; /*!< total number of endpoints in the interface */ + uint8_t bInterfaceClass; /*!< interface class ID */ + uint8_t bInterfaceSubClass; /*!< interface subclass ID */ + uint8_t bInterfaceProtocol; /*!< interface protocol ID */ + uint8_t iInterface; /*!< index of the string descriptor describing the interface */ +} usb_descriptor_interface_struct; + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size. */ + + uint8_t bEndpointAddress; /*!< logical address of the endpoint */ + uint8_t bmAttributes; /*!< endpoint attributes */ + uint16_t wMaxPacketSize; /*!< size of the endpoint bank, in bytes */ + uint8_t bInterval; /*!< polling interval in milliseconds for the endpoint if it is an interrupt or isochrnous type */ +} usb_descriptor_endpoint_struct; + +typedef struct +{ + usb_descriptor_header_struct Header; /*!< descriptor header, including type and size. */ + uint16_t wLANGID; /*!< LANGID code */ +}usb_descriptor_language_id_struct; + +#pragma pack() + +#endif /* USB_STD_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_core.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_core.h new file mode 100644 index 0000000000000000000000000000000000000000..637f1b5654085dffe915386afc220a4216e3dd9d --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_core.h @@ -0,0 +1,81 @@ +/*! + \file usbd_core.h + \brief USB device mode core driver header file + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_CORE_H +#define USBD_CORE_H + +#include "usbd_conf.h" +#include "usb_core.h" +#include "usbd_std.h" + +/* constants definitions */ +/* device status */ +#define USB_STATUS_DEFAULT 1U /* default status */ +#define USB_STATUS_ADDRESSED 2U /* addressed status */ +#define USB_STATUS_CONFIGURED 3U /* configured status */ +#define USB_STATUS_SUSPENDED 4U /* suspended status */ + +/* function declarations */ +/* initailizes the USB device-mode handler stack */ +void usbd_init (usb_core_handle_struct *pudev, usb_core_id_enum core_id); +/* endpoint initialization */ +void usbd_ep_init (usb_core_handle_struct *pudev, const usb_descriptor_endpoint_struct *ep_desc); +/* endpoint deinitialize */ +void usbd_ep_deinit (usb_core_handle_struct *pudev, uint8_t ep_addr); +/* endpoint prepare to receive data */ +void usbd_ep_rx (usb_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint16_t buf_len); +/* endpoint prepare to transmit data */ +void usbd_ep_tx (usb_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint32_t buf_len); +/* transmit data on the control channel */ +usbd_status_enum usbd_ctltx (usb_core_handle_struct *pudev, uint8_t *pbuf, uint16_t len); +/* receive data on the control channel */ +usbd_status_enum usbd_ctlrx (usb_core_handle_struct *pudev, uint8_t *pbuf, uint16_t len); +/* transmit status on the control channel */ +usbd_status_enum usbd_ctlstatus_tx (usb_core_handle_struct *pudev); +/* receive status on the control channel */ +usbd_status_enum usbd_ctlstatus_rx (usb_core_handle_struct *pudev); +/* set an endpoint to stall status */ +void usbd_ep_stall (usb_core_handle_struct *pudev, uint8_t ep_addr); +/* clear endpoint stalled status */ +void usbd_ep_clear_stall (usb_core_handle_struct *pudev, uint8_t ep_addr); +/* flushes the fifos */ +void usbd_ep_fifo_flush (usb_core_handle_struct *pudev, uint8_t ep_addr); +/* get the received data length */ +uint16_t usbd_rxcount_get (usb_core_handle_struct *pudev, uint8_t ep_num); + +#endif /* USBD_CORE_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_int.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_int.h new file mode 100644 index 0000000000000000000000000000000000000000..89f791d8d8a07d05f602fd0f6286e2e61374465d --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_int.h @@ -0,0 +1,57 @@ +/*! + \file usbd_int.h + \brief USB device mode interrupt handler header file + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_INT_H +#define USBD_INT_H + +#include "usbd_core.h" + +/* constants definitions */ +typedef struct +{ + uint8_t (*SOF) (usb_core_handle_struct *pudev); +}usbd_int_cb_struct; + +extern usbd_int_cb_struct *usbd_int_fops; + +/* function declaration */ +/* USB device-mode interrupts global service routine handler */ +uint32_t usbd_isr (usb_core_handle_struct *pudev); + +#endif /* USBD_INT_H */ + diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_std.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_std.h new file mode 100644 index 0000000000000000000000000000000000000000..d8ad1a61db105d5687894563ae221b20876c44f9 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbd_std.h @@ -0,0 +1,98 @@ +/*! + \file usbd_std.h + \brief USB 2.0 standard defines + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBD_STD_H +#define USBD_STD_H + +#include "usb_std.h" +#include "usbd_core.h" +#include "usbd_conf.h" +#include + +/* constants definitions */ +#define USBD_LANGID_STR_IDX 0x00U /*!< USB language ID string index*/ +#define USBD_MFC_STR_IDX 0x01U /*!< USB manufacturer string index*/ +#define USBD_PRODUCT_STR_IDX 0x02U /*!< USB product string index*/ +#define USBD_SERIAL_STR_IDX 0x03U /*!< USB serial string index*/ +#define USBD_CONFIG_STR_IDX 0x04U /*!< USB configuration string index*/ +#define USBD_INTERFACE_STR_IDX 0x05U /*!< USB interface string index*/ + +#define USB_STATUS_REMOTE_WAKEUP 0x02U /*!< USB remote wakeup status*/ +#define USB_STATUS_SELF_POWERED 0x01U /*!< USB self power status*/ + +#define USB_FEATURE_ENDP_HALT 0x00U /*!< USB halt endpoint feature*/ +#define USB_FEATURE_REMOTE_WAKEUP 0x01U /*!< USB remote wakeup feature*/ +#define USB_FEATURE_TEST_MODE 0x02U /*!< USB test mode feature*/ + +#define ENG_LANGID 0x0409U /*!< USB english language id*/ +#define CHN_LANGID 0x0804U /*!< USB chinese language id*/ + +#define USB_DEVICE_DESC_SIZE 0x12U /*!< USB device descriptor size*/ + +#define LOWBYTE(x) ((uint8_t)((x) & 0x00FFU)) /*!< USB lowbyte operation marco*/ +#define HIGHBYTE(x) ((uint8_t)(((x) & 0xFF00U) >> 8U)) /*!< USB highbyte operation marco*/ + +#define USB_MIN(a, b) (((a) < (b)) ? (a) : (b)) /*!< USB minimum operation marco*/ + +#define WIDE_STRING(string) _WIDE_STRING(string) +#define _WIDE_STRING(string) L##string + +#define USBD_STRING_DESC(string) \ + (uint8_t *)&(struct { \ + uint8_t _len; \ + uint8_t _type; \ + wchar_t _data[sizeof(string)]; \ + }) { \ + sizeof(WIDE_STRING(string)) + 2U - 2U, \ + USB_DESCTYPE_STRING, \ + WIDE_STRING(string) \ + } + +#define IS_NOT_EP0(ep_addr) (((ep_addr) != 0x00U) && ((ep_addr) != 0x80U)) + +/* function declarations */ +/* USB device setup transaction*/ +usbd_status_enum usbd_setup_transaction (usb_core_handle_struct *pudev); +/* USB device out transaction*/ +usbd_status_enum usbd_out_transaction (usb_core_handle_struct *pudev, uint8_t endp_num); +/* USB device in transaction*/ +usbd_status_enum usbd_in_transaction (usb_core_handle_struct *pudev, uint8_t endp_num); +/* USB device enum error handle*/ +void usbd_enum_error (usb_core_handle_struct *pudev, usb_device_req_struct *req); + +#endif /* USBD_STD_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_core.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_core.h new file mode 100644 index 0000000000000000000000000000000000000000..8137444b504d01d3f7f624b809829209b5aea2b3 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_core.h @@ -0,0 +1,310 @@ +/*! + \file usbh_core.h + \brief header file for usbh_core.c + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBH_CORE_H +#define USBH_CORE_H + +#include "usbh_conf.h" +#include "usb_std.h" +#include "usb_core.h" + +/* constants definitions */ +#define MSC_CLASS 0x08 /*!< the MSC class define */ +#define HID_CLASS 0x03 /*!< the HID class define */ +#define MSC_PROTOCOL 0x50 /*!< the MSC protocal define */ +#define CBI_PROTOCOL 0x01 /*!< the CBI protocal define */ + +#define USBH_DEVICE_ADDRESS_DEFAULT 0U /*!< the default device address define */ +#define USBH_DEVICE_ADDRESS 1U /*!< the device address define */ +#define USBH_MAX_ERROR_COUNT 2U /*!< the max error count define */ + +#define HOST_USER_SELECT_CONFIGURATION 1U /*!< the user select configuration define */ +#define HOST_USER_CLASS_ACTIVE 2U /*!< the user class active define */ +#define HOST_USER_CLASS_SELECTED 3U /*!< the user class selected define */ +#define HOST_USER_CONNECTION 4U /*!< the user connecttion define */ +#define HOST_USER_DISCONNECTION 5U /*!< the user disconnection define */ +#define HOST_USER_UNRECOVERED_ERROR 6U /*!< the user unrecovered error define */ + +#define MAX_USBH_STATE_STACK_DEEP 4 /*!< the max state stack deep define */ +#define MAX_USBH_STATE_TABLE_NUM 10U /*!< the max state table number */ + +#define HOST_FSM_ID 0U /*!< the host state table id */ +#define ENUM_FSM_ID 1U /*!< the enum state table id */ +#define CMD_FSM_ID 2U /*!< the cmd state table id */ +#define CTRL_FSM_ID 3U /*!< the ctrl state table id */ +#define CLASS_REQ_FSM_ID 4U /*!< the class req state table id */ +#define CLASS_FSM_ID 5U /*!< the class state table id */ + +#define UP_STATE 100U /*!< up state define */ +#define GO_TO_UP_STATE_EVENT 100U /*!< go to up state event define */ + +#define HOST_HANDLE_TABLE_SIZE 9U /*!< the host handle table size define */ +/* the enum of host state */ +typedef enum +{ + HOST_IDLE = 0, /* the host idle state definition */ + HOST_DEV_ATTACHED, /* the host device attached state definition */ + HOST_DEV_DETACHED, /* the host device detached state definition */ + HOST_DETECT_DEV_SPEED, /* the host detect device speed state definition */ + HOST_ENUMERATION, /* the host enumeration state definition */ + HOST_CLASS_REQUEST, /* the host class request state definition */ + HOST_CLASS, /* the host class state definition */ + HOST_USER_INPUT, /* the host user input state definition */ + HOST_SUSPENDED, /* the host suspended state definition */ + HOST_ERROR /* the host error state definition */ +}host_state_enum; + +/* the enum of host event */ +typedef enum +{ + HOST_EVENT_ATTACHED = 0, /* the host attached event */ + HOST_EVENT_ENUM, /* the host enum event */ + HOST_EVENT_USER_INPUT, /* the host user input event */ + HOST_EVENT_CLASS_REQ, /* the host class request event */ + HOST_EVENT_CLASS, /* the host class event */ + HOST_EVENT_ERROR, /* the host error event */ + HOST_EVENT_DEV_DETACHED, /* the host device detached event */ + HOST_EVENT_IDLE /* the host idle event */ +}host_event_enum; + +/* the enum of enum state */ +typedef enum +{ + ENUM_IDLE = 0, /* the enum idle state definition */ + ENUM_SET_ADDR, /* the enum set address state definition */ + ENUM_GET_FULL_DEV_DESC, /* the enum get full device descripter state definition */ + ENUM_GET_CFG_DESC, /* the enum get configuration descripter state definition */ + ENUM_GET_FULL_CFG_DESC, /* the enum get full configuration descripter state definition */ + ENUM_GET_MFC_STRING_DESC, /* the enum get MFC string descripter state definition */ + ENUM_GET_PRODUCT_STRING_DESC, /* the enum get product string descripter state definition */ + ENUM_GET_SERIALNUM_STRING_DESC, /* the enum get serialnum string descripter state definition */ + ENUM_SET_CONFIGURATION, /* the enum set congiguration state definition */ + ENUM_DEV_CONFIGURED /* the enum device configuration state definition */ +}enum_state_enum; + +/* the enum of ctrl state */ +typedef enum +{ + CTRL_IDLE = 0, /* the ctrl idle state definition */ + CTRL_SETUP, /* the ctrl setup state definition */ + CTRL_DATA, /* the ctrl data state definition */ + CTRL_STATUS, /* the ctrl status state definition */ + CTRL_ERROR, /* the ctrl error state definition */ + CTRL_STALLED, /* the ctrl stalled state definition */ + CTRL_COMPLETE /* the ctrl complete state definition */ +}ctrl_state_enum; + +/* the enum of host status */ +typedef enum +{ + USBH_OK = 0, /* the usbh ok status definition */ + USBH_BUSY, /* the usbh busy status definition */ + USBH_FAIL, /* the usbh fail status definition */ + USBH_NOT_SUPPORTED, /* the usbh not supported status definition */ + USBH_UNRECOVERED_ERROR, /* the usbh unrecovered error status definition */ + USBH_SPEED_UNKNOWN_ERROR, /* the usbh speed unknown error status definition */ + USBH_APPLY_DEINIT /* the usbh apply deinit status definition */ +}usbh_status_enum; + +/* the state of user action */ +typedef enum +{ + USBH_USER_NO_RESP = 0, /* the user no response */ + USBH_USER_RESP_OK = 1, /* the user response ok */ +}usbh_user_status_enum; + +/* control transfer information */ +typedef struct +{ + uint8_t hc_in_num; /* the host in channel number */ + uint8_t hc_out_num; /* the host out channel number */ + uint8_t ep0_size; /* the endpoint 0 max packet size */ + uint8_t error_count; /* the error count */ + uint16_t length; /* the length */ + uint16_t timer; /* the timer */ + uint8_t *buff; /* the buffer */ + usb_setup_union setup; /* the setup packet */ +}usbh_ctrl_struct; + +/* device property */ +typedef struct +{ + uint8_t address; /* the device address */ + uint8_t speed; /* the device speed */ + usb_descriptor_device_struct dev_desc; /* the device descripter */ + usb_descriptor_configuration_struct cfg_desc; /* the configuration descripter */ + usb_descriptor_interface_struct itf_desc[USBH_MAX_INTERFACES_NUM]; /* the interface descripter */ + usb_descriptor_endpoint_struct ep_desc[USBH_MAX_INTERFACES_NUM][USBH_MAX_EP_NUM]; /* the endpoint descripter */ +}usbh_device_struct; + +/* user callbacks */ +typedef struct +{ + void (*init) (void); /* the user callback init function */ + void (*deinit) (void); /* the user callback deinit function */ + void (*device_connected) (void); /* the user callback device connected function */ + void (*device_reset) (void); /* the user callback device reset function */ + void (*device_disconnected) (void); /* the user callback device disconnected function */ + void (*over_current_detected) (void); /* the user callback over current detected function */ + void (*device_speed_detected) (uint8_t device_speed); /* the user callback device speed detected function */ + void (*device_desc_available) (void *devDesc); /* the user callback device descrpiter available function */ + void (*device_address_set) (void); /* the user callback set device address function */ + + void (*configuration_desc_available)(usb_descriptor_configuration_struct *cfg_desc, + usb_descriptor_interface_struct *itf_desc, + usb_descriptor_endpoint_struct *ep_desc); + /* the configuration descripter available function */ + + void (*manufacturer_string) (void *mfc_string); /* the user callback manufacturer string function */ + void (*product_string) (void *prod_string); /* the user callback product string function */ + void (*serial_num_string) (void *serial_string); /* the user callback serial number string function */ + void (*enumeration_finish) (void); /* the user callback enumeration finish function */ + usbh_user_status_enum (*user_input) (void); /* the user callback user input function */ + int (*user_application) (usb_core_handle_struct *pudev, uint8_t id); + /* the user callback user appliction function */ + void (*device_not_supported) (void); /* the user callback device not supported function */ + void (*unrecovered_error) (void); /* the user callback unrecovered error function */ +}usbh_user_callback_struct; + +/* the backup state struct */ +typedef struct +{ + host_state_enum host_backup_state; /* the host backup state */ + enum_state_enum enum_backup_state; /* the enum backup state */ + ctrl_state_enum ctrl_backup_state; /* the ctrl backup state */ + uint8_t class_req_backup_state; /* the class request backup state */ + uint8_t class_backup_state; /* the class backup state */ +} backup_state_struct; + +/* host information */ +typedef struct +{ + backup_state_struct usbh_backup_state; /* the usbh backup state variable */ + usbh_ctrl_struct control; /* the control struct variable */ + usbh_device_struct device; /* the device struct variable */ + usbh_user_callback_struct *usr_cb; /* the user callback function */ + usbh_status_enum (*class_init) (usb_core_handle_struct *pudev, void *phost); /* the class init function */ + void (*class_deinit) (usb_core_handle_struct *pudev, void *phost); /* the class deinit function */ +}usbh_host_struct; + +/* the action function definition */ +typedef usbh_status_enum (*ACT_FUN) (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void* pustate); + +/* the state table struct */ +typedef struct +{ + uint8_t cur_state; /* the current state */ + uint8_t cur_event; /* the current event */ + uint8_t next_state; /* the next state */ + ACT_FUN event_action_fun; /* the event action function entry */ +} state_table_struct; + +/* the state stack struct */ +typedef struct +{ + uint8_t state; /* the state in state stack */ + state_table_struct* table; /* the table in state stack */ + uint8_t table_size; /* the table size in state stack */ +} usbh_state_stack_struct; + +/* the state regist table struct */ +typedef struct +{ + uint8_t id; /* the id of the state table */ + state_table_struct* table; /* the table entry to regist */ + uint8_t table_size; /* the table size to regist */ +} usbh_state_regist_table_struct; + +/* the state handle struct */ +typedef struct +{ + uint8_t usbh_current_state; /* current state */ + uint8_t usbh_current_state_table_size; /* current state table size */ + state_table_struct* usbh_current_state_table; /* current state table */ + + usbh_state_stack_struct stack[MAX_USBH_STATE_STACK_DEEP]; /* the stack of state table */ + int8_t usbh_current_state_stack_top; /* the current state top */ + + usbh_state_regist_table_struct usbh_regist_state_table[MAX_USBH_STATE_TABLE_NUM]; /* the array of regist state table */ + uint8_t usbh_regist_state_table_num; /* the number of regist state table */ +} usbh_state_handle_struct; + +/* function declarations */ +/* the host core driver function */ +usbh_status_enum host_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate); +/* initialize the host portion of the driver */ +uint32_t hcd_init (usb_core_handle_struct *pudev, usb_core_id_enum core_id); +/* check if the device is connected */ +uint32_t hcd_is_device_connected (usb_core_handle_struct *pudev); +/* this function returns the last URBstate */ +urb_state_enum hcd_urb_state_get (usb_core_handle_struct *pudev, uint8_t channel_num); +/* this function returns the last URBstate */ +uint32_t hcd_xfer_count_get (usb_core_handle_struct *pudev, uint8_t channel_num); +/* de-initialize host */ +usbh_status_enum usbh_deinit (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct* pustate); + +/* the state core driver function */ +/* state core driver init */ +void scd_init (usbh_state_handle_struct* pustate); +/* state core driver table regist */ +void scd_table_regist (usbh_state_handle_struct* pustate, + state_table_struct* pstate_table, + uint8_t table_id, + uint8_t current_table_size); +/* state core driver begin */ +void scd_begin (usbh_state_handle_struct* pustate, uint8_t table_id); +/* state core driver move state */ +void scd_state_move (usbh_state_handle_struct* pustate, uint8_t state); +/* state core driver event handle */ +usbh_status_enum scd_event_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct* pustate, + uint8_t event, + uint8_t state); +/* state core driver table push */ +void scd_table_push (usbh_state_handle_struct* pustate); +/* state core driver table pop */ +void scd_table_pop (usbh_state_handle_struct* pustate); +/* the function is only used to state move */ +usbh_status_enum only_state_move (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate); +/* the function to the up state */ +usbh_status_enum goto_up_state_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate); + +#endif /* USBH_CORE_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_ctrl.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_ctrl.h new file mode 100644 index 0000000000000000000000000000000000000000..b9cf7c5f97765fa2db5f13910b51feac293b579b --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_ctrl.h @@ -0,0 +1,73 @@ +/*! + \file usbh_ctrl.h + \brief header file for usbh_ctrl.c + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBH_CTRL_H +#define USBH_CTRL_H + +#include "usbh_core.h" +#include "usbh_usr.h" + +/* constants definitions */ +/* the enum of CTRL event */ +typedef enum +{ + CTRL_EVENT_IDLE = 0, /* the ctrl idle event */ + CTRL_EVENT_SETUP, /* the ctrl setup event */ + CTRL_EVENT_DATA, /* the ctrl data event */ + CTRL_EVENT_STATUS, /* the ctrl status event */ + CTRL_EVENT_COMPLETE, /* the ctrl complete event */ + CTRL_EVENT_ERROR, /* the ctrl error event */ + CTRL_EVENT_STALLED, /* the ctrl stalled event */ +}ctrl_event_enum; + +#define CTRL_HANDLE_TABLE_SIZE 13U /*!< the ctrl handle table size define */ + +extern state_table_struct ctrl_handle_table[CTRL_HANDLE_TABLE_SIZE]; +extern uint8_t ctrl_polling_handle_flag; + +/* function declarations */ +/* the polling function of control transfer state handle */ +usbh_status_enum ctrl_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate); +/* send datas from the host channel */ +usbh_status_enum usbh_xfer (usb_core_handle_struct *pudev, uint8_t *buf, uint8_t hc_num, uint16_t len); +/* send the setup packet to the device */ +usbh_status_enum usbh_ctltx_setup (usb_core_handle_struct *pudev, uint8_t *buf, uint8_t hc_num); +/* this function prepare a hc and start a transfer */ +uint32_t hcd_submit_request (usb_core_handle_struct *pudev, uint8_t channel_num); + +#endif /* USBH_CTRL_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_hcs.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_hcs.h new file mode 100644 index 0000000000000000000000000000000000000000..d387f15b765a41ba807837c5eda2d2a455da1f4d --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_hcs.h @@ -0,0 +1,73 @@ +/*! + \file usbh_hcs.h + \brief header file for usbh_hcs.c + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBH_HCS_H +#define USBH_HCS_H + +#include "usbh_core.h" + +/* constants definitions */ +#define HC_MAX 8U +#define HC_OK 0x0000U +#define HC_USED 0x8000U +#define HC_ERROR 0xFFFFU +#define HC_USED_MASK 0x7FFFU + +/* function declarations */ +/* allocate a new channel for the pipe */ +uint8_t usbh_channel_alloc (usb_core_handle_struct *pudev, uint8_t ep_addr); +/* free all usb host channel */ +uint8_t usbh_allchannel_dealloc (usb_core_handle_struct *pudev); +/* free the usb host channel */ +uint8_t usbh_channel_free (usb_core_handle_struct *pudev, uint8_t index); +/* open a channel */ +uint8_t usbh_channel_open (usb_core_handle_struct *pudev, + uint8_t channel_num, + uint8_t dev_addr, + uint8_t dev_speed, + uint8_t ep_type, + uint16_t ep_mps); +/* modify a channel */ +uint8_t usbh_channel_modify (usb_core_handle_struct *pudev, + uint8_t channel_num, + uint8_t dev_addr, + uint8_t dev_speed, + uint8_t ep_type, + uint16_t ep_mps); + +#endif /* USBH_HCS_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_int.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_int.h new file mode 100644 index 0000000000000000000000000000000000000000..468ebc37d74e906958d9f2c6810554250624eeef --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_int.h @@ -0,0 +1,58 @@ +/*! + \file usbh_int.h + \brief USB host mode interrupt handler header file + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBH_INT_H +#define USBH_INT_H + +#include "usb_core.h" + +/* constants definitions */ +typedef struct +{ + uint8_t (*sof) (usb_core_handle_struct *pudev); + uint8_t (*device_connected) (usb_core_handle_struct *pudev); + uint8_t (*device_disconnected) (usb_core_handle_struct *pudev); +}usbh_hcd_int_cb_struct; + +extern usbh_hcd_int_cb_struct *usbh_hcd_int_fops; + +/* function declarations */ +/* handle global host interrupt */ +uint32_t usbh_isr (usb_core_handle_struct *pudev); + +#endif /* USBH_INT_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_std.h b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_std.h new file mode 100644 index 0000000000000000000000000000000000000000..c4bc6cd91b9c6244450b150965a31d70ad0bce5d --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usbh_std.h @@ -0,0 +1,101 @@ +/*! + \file usbh_std.h + \brief header file for usbh_std.c + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef USBH_STD_H +#define USBH_STD_H + +#include "usbh_core.h" +#include "usbh_usr.h" + +/* constants definitions */ +typedef enum +{ + ENUN_EVENT_IDLE = 0, /* the enum idle event */ + ENUM_EVENT_SET_ADDR, /* the enum set address event */ + ENUN_EVENT_GET_FULL_DEV_DESC, /* the enum get full device descripter event */ + ENUN_EVENT_GET_CFG_DESC, /* the enum get congiguration descripter event */ + ENUN_EVENT_GET_FULL_CFG_DESC, /* the enum get full configuration descripter event */ + ENUN_EVENT_GET_MFC_STRING_DESC, /* the enum get MFC string descripter event */ + ENUN_EVENT_GET_PRODUCT_STRING_DESC, /* the enum get product string event */ + ENUN_EVENT_GET_SERIALNUM_STRING_DESC, /* the enum get serialnum string event */ + ENUN_EVENT_SET_CONFIGURATION, /* the enum set configuration event */ + ENUN_EVENT_DEV_CONFIGURED /* the enum device configured event */ +}enum_event_enum; +/* standard feature selector for clear feature command */ +#define FEATURE_SELECTOR_ENDPOINT 0x00U +#define FEATURE_SELECTOR_DEVICE 0x01U + +#define USBH_SETUP_PACKET_SIZE 8U /* setup packet size */ +#define ENUM_HANDLE_TABLE_SIZE 10U /* enumerate handle table size */ + +extern uint8_t usbh_cfg_desc[512]; +extern uint8_t enum_polling_handle_flag; +extern state_table_struct enum_handle_table[ENUM_HANDLE_TABLE_SIZE]; + +/* function declarations */ +/* the polling function of enumeration state */ +usbh_status_enum enum_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate); +/* get descriptor in usb host enumeration stage */ +void usbh_enum_desc_get (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + uint8_t *buf, + uint8_t req_type, + uint16_t value_idx, + uint16_t len); +/* set address in usb host enumeration stage */ +void usbh_enum_addr_set (usb_core_handle_struct *pudev, usbh_host_struct *puhost, uint8_t device_address); +/* set configuration in usb host enumeration stage */ +void usbh_enum_cfg_set (usb_core_handle_struct *pudev, usbh_host_struct *puhost, uint16_t cfg_idx); +/* parse the device descriptor */ +void usbh_device_desc_parse (usb_descriptor_device_struct *dev_desc, uint8_t *buf, uint16_t len); +/* parse the configuration descriptor */ +void usbh_cfg_desc_parse (usb_descriptor_configuration_struct *cfg_desc, + usb_descriptor_interface_struct *itf_desc, + usb_descriptor_endpoint_struct ep_desc[][USBH_MAX_EP_NUM], + uint8_t *buf, + uint16_t len); +/* parse the interface descriptor */ +void usbh_interface_desc_parse (usb_descriptor_interface_struct *itf_desc, uint8_t *buf); +/* parse the endpoint descriptor */ +void usbh_endpoint_desc_parse (usb_descriptor_endpoint_struct *ep_desc, uint8_t *buf); +/* parse the string descriptor */ +void usbh_string_desc_parse (uint8_t *psrc, uint8_t *pdest, uint16_t len); +/* get the next descriptor header */ +usb_descriptor_header_struct *usbh_next_desc_get (uint8_t *pbuf, uint16_t *ptr); + +#endif /* USBH_STD_H */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usb_core.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usb_core.c new file mode 100644 index 0000000000000000000000000000000000000000..a2fa307efb6cfe3062113af7076dfae8f7d6e532 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usb_core.c @@ -0,0 +1,974 @@ +/*! + \file usb_core.c + \brief USB core driver which can operate in host-mode and device-mode + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usb_core.h" + +static void usb_commonint_enable (usb_core_handle_struct *pudev); +static usb_status_enum usb_core_reset (usb_core_handle_struct *pudev); + +/*! + \brief enable the commmon interrupts which are used in both device and host modes + \param[in] pudev: pointer to selected usb device + \param[out] none + \retval none +*/ +static void usb_commonint_enable (usb_core_handle_struct *pudev) +{ +#ifndef USE_OTG_MODE + + /* clear any pending USB interrupts */ + USB_GOTGINTF = 0xFFFFFFFFU; + +#endif /* USE_OTG_MODE */ + + USB_GINTF = 0xBFFFFFFF; + + /* enable the usb wakeup and suspend interrupts */ + USB_GINTEN = GINTEN_WKUPIE | GINTEN_SPIE; + +#ifdef USE_OTG_MODE + + /* enable the OTG interrupts, session interrrupts and connector ID pin interrupt */ + USB_GINTEN |= GINTEN_OTGIE | GINTEN_SESIE | GINTEN_CIDPSCIE; + +#endif /* USE_OTG_MODE */ +} + +/*! + \brief soft reset of the OTG_FS core + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +static usb_status_enum usb_core_reset (usb_core_handle_struct *pudev) +{ + uint32_t count = 0U; + + /* enable core soft reset */ + USB_GRSTCTL |= GRSTCTL_CSRST; + + /* wait for the core to be soft reset */ + do { + if (++count > 200000U) { + break; + } + } while (1U == (USB_GRSTCTL & GRSTCTL_CSRST)); + + /* wait for addtional 3 PHY clocks */ + if (NULL != pudev->udelay) { + pudev->udelay(3U); + } + + return USB_OK; +} + +/*! + \brief write a packet into the tx fifo associated with the endpoint + \param[in] src: pointer to source buffer + \param[in] chep_num: channel or endpoint identifier which is in (0..3) + \param[in] len: packet length + \param[out] none + \retval operation status +*/ +usb_status_enum usb_fifo_write (uint8_t *src, uint8_t chep_num, uint16_t len) +{ + uint32_t count32b = 0U, i = 0U; + __IO uint32_t *fifo = USB_FIFO(chep_num); + + count32b = (len + 3U) / 4U; + + for (i = 0U; i < count32b; i++) { + *fifo = *((__packed uint32_t *)src); + + src += 4U; + } + + return USB_OK; +} + +/*! + \brief read a packet from the rx fifo associated with the endpoint + \param[in] dest: pointer to destination buffer + \param[in] len: packet length + \param[out] none + \retval void type pointer +*/ +void *usb_fifo_read (uint8_t *dest, uint16_t len) +{ + uint32_t i = 0U; + uint32_t count32b = (len + 3U) / 4U; + + __IO uint32_t *fifo = USB_FIFO(0U); + + for (i = 0U; i < count32b; i++) { + *(__packed uint32_t *)dest = *fifo; + + dest += 4U; + } + + return ((void *)dest); +} + +/*! + \brief initialize core parameters + \param[in] pudev: pointer to usb device + \param[in] core_id: USB core id + \param[out] none + \retval operation status +*/ +usb_status_enum usb_core_select (usb_core_handle_struct *pudev, usb_core_id_enum core_id) +{ + /* at startup the core is in FS mode */ + pudev->cfg.core_speed = USB_CORE_SPEED_FULL; + pudev->cfg.max_packet_size = USBFS_MAX_PACKET_SIZE; + + /* initialize the core parameters */ + if (USB_FS_CORE_ID == core_id) { + + pudev->cfg.core_id = USB_FS_CORE_ID; + + /* set the host channel numbers */ + pudev->cfg.host_channel_num = USBFS_MAX_HOST_CHANNELCOUNT; + + /* set the device endpoint numbers */ + pudev->cfg.dev_endp_num = USBFS_MAX_DEV_EPCOUNT; + + /* fifo size is in terms of DWORD */ + pudev->cfg.max_fifo_size = USBFS_MAX_FIFO_WORDLEN; + + /* OTG_FS core use embedded physical layer */ + pudev->cfg.phy_interface = USB_CORE_EMBEDDED_PHY; + + #ifdef USBFS_SOF_OUTPUT_ENABLED + pudev->cfg.sof_output = 1U; + #endif /* USBFS_SOF_OUTPUT_ENABLED */ + + #ifdef USBFS_LOW_PWR_MGMT_SUPPORT + pudev->cfg.low_power = 1U; + #endif /* USBFS_LOW_PWR_MGMT_SUPPORT */ + } + + return USB_OK; +} + +/*! + \brief initializes the USB controller registers and + prepares the core device mode or host mode operation + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +usb_status_enum usb_core_init (usb_core_handle_struct *pudev) +{ + /* soft reset the core */ + usb_core_reset(pudev); + + /* active the transceiver and enable vbus sensing */ + USB_GCCFG |= GCCFG_PWRON | GCCFG_VBUSACEN | GCCFG_VBUSBCEN; + + /* set tx fifo empty level to half empty mode */ + USB_GAHBCS &= ~GAHBCS_TXFTH | TXFIFO_EMPTY_HALF; + +#ifndef VBUS_SENSING_ENABLED + USB_GCCFG |= GCCFG_VBUSIG; +#endif /* VBUS_SENSING_ENABLED */ + + if(pudev->cfg.sof_output){ + USB_GCCFG |= GCCFG_SOFOEN; + } + + if (NULL != pudev->mdelay) { + pudev->mdelay(20U); + } + + +#ifdef USE_OTG_MODE + /* enable OTG features */ + USB_GUSBCS |= GUSBCS_HNPCAP | GUSBCS_SRPCAP; + USB_OTG_EnableCommonInt(pudev); + +#endif /* USE_OTG_MODE */ + + return USB_OK; +} + +/*! + \brief flush a tx fifo or all tx fifos + \param[in] pudev: pointer to usb device + \param[in] fifo_num: fifo number which is in (0..3) + \param[out] none + \retval operation status +*/ +usb_status_enum usb_txfifo_flush (usb_core_handle_struct *pudev, uint8_t fifo_num) +{ + uint32_t count = 0U; + + USB_GRSTCTL = ((uint32_t)fifo_num << 6U) | GRSTCTL_TXFF; + + /* wait for tx fifo flush bit is set */ + do { + if (++count > 200000U) { + break; + } + } while (USB_GRSTCTL & GRSTCTL_TXFF); + + /* wait for 3 PHY clocks */ + if (NULL != pudev->udelay) { + pudev->udelay(3U); + } + + return USB_OK; +} + +/*! + \brief flush the entire rx fifo + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +usb_status_enum usb_rxfifo_flush (usb_core_handle_struct *pudev) +{ + uint32_t count = 0U; + + USB_GRSTCTL = GRSTCTL_RXFF; + + /* wait for rx fifo flush bit is set */ + do { + if (++count > 200000U) { + break; + } + } while (USB_GRSTCTL & GRSTCTL_RXFF); + + /* wait for 3 PHY clocks */ + if (NULL != pudev->udelay) { + pudev->udelay(3U); + } + + return USB_OK; +} + +/*! + \brief set operation mode (host or device) + \param[in] pudev: pointer to usb device + \param[in] mode: operation mode which need to set + \arg HOST_MODE + \arg DEVICE_MODE + \param[out] none + \retval operation status +*/ +usb_status_enum usb_mode_set (usb_core_handle_struct *pudev, uint8_t mode) +{ + if (HOST_MODE == mode) { + USB_GUSBCS &= ~GUSBCS_FDM; + USB_GUSBCS |= GUSBCS_FHM; + } else if (DEVICE_MODE == mode) { + USB_GUSBCS &= ~GUSBCS_FHM; + USB_GUSBCS |= GUSBCS_FDM; + } else { + /* no operation */ + } + + if (NULL != pudev->mdelay) { + pudev->mdelay(50U); + } + + return USB_OK; +} + +#ifdef USE_HOST_MODE + +/*! + \brief initializes USB core for host mode + \param[in] pudev: pointer to selected usb host + \param[out] none + \retval operation status +*/ +usb_status_enum usb_hostcore_init (usb_core_handle_struct *pudev) +{ + uint32_t i = 0U; + __IO uint32_t nptxfifolen = 0U; + __IO uint32_t ptxfifolen = 0U; + +#ifdef USE_OTG_MODE + __IO uint32_t otgctl = 0; +#endif /* USE_OTG_MODE */ + + /* restart the PHY clock */ + USB_PWRCLKCTL = 0U; + + /* initialize host configuration register */ + if (USB_CORE_ULPI_PHY == pudev->cfg.phy_interface) { + USB_FSLSCLOCK_INIT(HCTLR_30_60_MHZ); + } else { + USB_FSLSCLOCK_INIT(HCTLR_48_MHZ); + } + + /* reset USB port */ + usb_port_reset(pudev); + + /* configure data fifo sizes */ + if (USB_FS_CORE_ID == pudev->cfg.core_id) { + /* set rx fifo size */ + USB_GRFLEN = USBFS_RX_FIFO_SIZE; + + /* set non-periodic tx fifo size and address */ + nptxfifolen &= ~HNPTFLEN_HNPTXRSAR; + nptxfifolen |= USBFS_RX_FIFO_SIZE; + nptxfifolen &= ~HNPTFLEN_HNPTXFD; + nptxfifolen |= USBFS_HTX_NPFIFO_SIZE << 16; + USB_HNPTFLEN = nptxfifolen; + + /* set periodic tx fifo size and address */ + ptxfifolen &= ~HPTFLEN_HPTXFSAR; + ptxfifolen |= USBFS_RX_FIFO_SIZE + USBFS_HTX_PFIFO_SIZE; + ptxfifolen &= ~HPTFLEN_HPTXFD; + ptxfifolen |= USBFS_HTX_PFIFO_SIZE << 16; + USB_HPTFLEN = ptxfifolen; + } + +#ifdef USE_OTG_MODE + + /* clear host set HNP enable bit in the USB OTG control register */ + otgctl |= GOTGCS_HHNPEN; + USB_GOTGCS &= ~otgctl; + USB_GOTGCS |= 0; + +#endif /* USE_OTG_MODE */ + + /* make sure the fifos are flushed */ + + /* flush all tx fifos in device or host mode */ + usb_txfifo_flush(pudev, 0x10U); + + /* flush the entire rx fifo */ + usb_rxfifo_flush(pudev); + + /* clear all pending host channel interrupts */ + USB_HACHINTEN &= ~HACHINTEN_CINTEN; + + for (i = 0U; i < pudev->cfg.host_channel_num; i++) { + USB_HCHxINTEN(i) = 0U; + USB_HCHxINTF(i) = 0xFFFFFFFFU; + } + +#ifndef USE_OTG_MODE + usb_vbus_drive(pudev, 1U); +#endif /* USE_OTG_MODE */ + + usb_hostint_enable(pudev); + + return USB_OK; +} + +/*! + \brief control the VBUS to power + \param[in] pudev: pointer to selected usb host + \param[in] state: VBUS state + \param[out] none + \retval none +*/ +void usb_vbus_drive (usb_core_handle_struct *pudev, uint8_t state) +{ + __IO uint32_t host_port = 0U; + + /* enable or disable the external charge pump */ + if ((void *)0 != pudev->host.vbus_drive) { + pudev->host.vbus_drive(pudev, state); + } + + /* turn on the host port power. */ + host_port = USB_PORT_READ(); + + if ((0U == (host_port & HPCS_PP)) && (1U == state)) { + host_port |= HPCS_PP; + } else if ((1U == (host_port & HPCS_PP)) && (0U == state)) { + host_port &= ~HPCS_PP; + } else { + /* no operation */ + } + + USB_HPCS = host_port; + + if (NULL != pudev->mdelay) { + pudev->mdelay(200U); + } +} + +/*! + \brief enables the host mode interrupts + \param[in] pudev: pointer to selected usb host + \param[out] none + \retval operation status +*/ +usb_status_enum usb_hostint_enable (usb_core_handle_struct *pudev) +{ + uint32_t gintf = 0U; + + /* disable all interrupts */ + USB_GINTEN = 0U; + + /* clear any pending interrupts */ + USB_GINTF = 0xFFFFFFFFU; + + /* enable the common interrupts */ + usb_commonint_enable(pudev); + + gintf |= GINTF_RXFNEIF; + + /* enable host_mode-related interrupts */ + gintf |= GINTF_HPIF | GINTF_HCIF | GINTF_DISCIF | GINTF_SOF | GINTF_ISOONCIF; + + USB_GINTEN &= ~gintf; + USB_GINTEN |= gintf; + + return USB_OK; +} + +/*! + \brief reset host port + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +uint32_t usb_port_reset (usb_core_handle_struct *pudev) +{ + __IO uint32_t hpcs; + + hpcs = USB_PORT_READ(); + + hpcs |= HPCS_PRST; + + USB_HPCS = hpcs; + + if (NULL != pudev->mdelay) { + pudev->mdelay(100U); + } + + hpcs &= ~HPCS_PRST; + + USB_HPCS = hpcs; + + if (NULL != pudev->mdelay) { + pudev->mdelay(20U); + } + + return USB_OK; +} + +/*! + \brief initialize host channel + \param[in] pudev: pointer to usb device + \param[in] hc_num: host channel number which is in (0..7) + \param[out] none + \retval operation status +*/ +usb_status_enum usb_hostchannel_init(usb_core_handle_struct *pudev, uint8_t hc_num) +{ + uint8_t is_low_speed = 0U; + __IO uint32_t chinten = 0U; + __IO uint32_t chctl = 0U; + + usb_hostchannel_struct *puhc = &pudev->host.host_channel[hc_num]; + + /* clear old interrupt conditions for this host channel */ + USB_HCHxINTF((uint16_t)hc_num) = 0xFFFFFFFFU; + + /* enable channel interrupts required for this transfer */ + switch (puhc->endp_type) { + case USB_EPTYPE_CTRL: + case USB_EPTYPE_BULK: + chinten |= HCHINTEN_TFIE | HCHINTEN_STALLIE | HCHINTEN_USBERIE \ + | HCHINTEN_DTERIE | HCHINTEN_NAKIE; + + if (puhc->endp_in) { + chinten |= HCHINTEN_BBERIE; + } else { + chinten |= HCHINTEN_NYETIE; + } + break; + + case USB_EPTYPE_INTR: + chinten |= HCHINTEN_TFIE | HCHINTEN_STALLIE | HCHINTEN_USBERIE | HCHINTEN_DTERIE \ + | HCHINTEN_NAKIE | HCHINTEN_REQOVRIE; + + if (puhc->endp_in) { + chinten |= HCHINTEN_BBERIE; + } + break; + + case USB_EPTYPE_ISOC: + chinten |= HCHINTEN_TFIE | HCHINTEN_REQOVRIE | HCHINTEN_ACKIE; + + if (puhc->endp_in) { + chinten |= HCHINTEN_USBERIE | HCHINTEN_BBERIE; + } + break; + + default: + break; + } + + USB_HCHxINTEN((uint16_t)hc_num) = chinten; + + /* enable the top level host channel interrupt */ + USB_HACHINTEN |= 1U << hc_num; + + /* make sure host channel interrupts are enabled */ + USB_GINTEN |= GINTEN_HCIE; + + /* program the hcctlr register */ + chctl = 0U; + + if (HPRT_PRTSPD_LOW_SPEED == puhc->dev_speed) { + is_low_speed = 1U; + } + + chctl |= (uint32_t)puhc->dev_addr << 22U; + chctl |= (uint32_t)puhc->endp_type << 18U; + chctl |= (uint32_t)puhc->endp_id << 11U; + chctl |= (uint32_t)puhc->endp_in << 15U; + chctl |= (uint32_t)is_low_speed << 17U; + chctl |= puhc->endp_mps; + + if (HCCHAR_INTR == puhc->endp_type) { + chctl |= HCHCTL_ODDFRM; + } + + USB_HCHxCTL((uint16_t)hc_num) = chctl; + + return USB_OK; +} + +/*! + \brief prepare host channel for transferring packets + \param[in] pudev: pointer to usb device + \param[in] hc_num: host channel number which is in (0..7) + \param[out] none + \retval operation status +*/ +usb_status_enum usb_hostchannel_startxfer(usb_core_handle_struct *pudev, uint8_t hc_num) +{ + uint16_t dword_len = 0U; + uint16_t packet_num = 0U; + + __IO uint32_t chxlen = 0U; + __IO uint32_t chctl = 0U; + + usb_hostchannel_struct *puhc = &pudev->host.host_channel[hc_num]; + + /* compute the expected number of packets associated to the transfer */ + if (puhc->xfer_len > 0U) { + packet_num = ((uint16_t)puhc->xfer_len + puhc->endp_mps - 1U) / puhc->endp_mps; + + if (packet_num > HC_MAX_PACKET_COUNT) { + packet_num = HC_MAX_PACKET_COUNT; + puhc->xfer_len = (uint32_t)(packet_num) * (uint32_t)(puhc->endp_mps); + } + } else { + packet_num = 1U; + } + + if (puhc->endp_in) { + puhc->xfer_len = (uint32_t)(packet_num) * (uint32_t)(puhc->endp_mps); + } + + /* initialize the host channel length register */ + chxlen &= ~HCHLEN_TLEN; + chxlen |= puhc->xfer_len; + chxlen &= ~HCHLEN_PCNT; + chxlen |= (uint32_t)packet_num << 19U; + chxlen &= ~HCHLEN_DPID; + chxlen |= (uint32_t)(puhc->DPID) << 29U; + USB_HCHxLEN((uint16_t)hc_num) = (uint32_t)chxlen; + + /* set host channel enable */ + chctl = USB_HCHxCTL((uint16_t)hc_num); + + if (1U == USB_EVEN_FRAME()) { + chctl |= HCHCTL_ODDFRM; + } else { + chctl &= ~HCHCTL_ODDFRM; + } + + chctl |= HCHCTL_CEN; + chctl &= ~HCHCTL_CDIS; + USB_HCHxCTL((uint16_t)hc_num) = chctl; + + if ((0U == puhc->endp_in) && (puhc->xfer_len > 0U)) { + dword_len = (uint16_t)(puhc->xfer_len + 3U) / 4U; + + switch (puhc->endp_type) { + /* non-periodic transfer */ + case USB_EPTYPE_CTRL: + case USB_EPTYPE_BULK: + /* check if there is enough space in fifo space */ + if (dword_len > (USB_HNPTFQSTAT & HNPTFQSTAT_NPTXFS)) { + /* need to process data in non-periodic transfer fifo empty interrupt */ + USB_GINTEN |= GINTEN_NPTXFEIE; + } + break; + + /* periodic transfer */ + case USB_EPTYPE_INTR: + case USB_EPTYPE_ISOC: + /* check if there is enough space in FIFO space */ + if (dword_len > (USB_HPTFQSTAT & HPTFQSTAT_PTXFS)) { + /* need to process data in periodic transfer fifo empty interrupt */ + USB_GINTEN |= GINTEN_PTXFEIE; + } + break; + + default: + break; + } + + /* write packet into the Tx FIFO. */ + usb_fifo_write(puhc->xfer_buff, hc_num, (uint16_t)puhc->xfer_len); + } + + return USB_OK; +} + +/*! + \brief halt channel + \param[in] pudev: pointer to usb device + \param[in] hc_num: host channel number which is in (0..7) + \param[out] none + \retval operation status +*/ +usb_status_enum usb_hostchannel_halt(usb_core_handle_struct *pudev, uint8_t hc_num) +{ + uint8_t endp_type = 0U; + __IO uint32_t chctl = USB_HCHxCTL((uint16_t)hc_num); + + chctl |= HCHCTL_CEN | HCHCTL_CDIS; + + endp_type = (uint8_t)((chctl & HCHCTL_EPTYPE) >> 18U); + + /* check for space in the request queue to issue the halt. */ + if ((HCCHAR_CTRL == endp_type) || (HCCHAR_BULK == endp_type)) { + if (0U == (USB_HNPTFQSTAT & HNPTFQSTAT_NPTXFS)) { + chctl &= ~HCHCTL_CEN; + } + } else { + if (0U == (USB_HPTFQSTAT & HPTFQSTAT_PTXFS)) { + chctl &= ~HCHCTL_CEN; + } + } + + USB_HCHxCTL((uint16_t)hc_num) = chctl; + + return USB_OK; +} + +/*! + \brief stop the USB host and clean up fifos + \param[in] none + \param[out] none + \retval none +*/ +void usb_host_stop(usb_core_handle_struct *pudev) +{ + uint32_t i; + + /* disable all host channel interrupt */ + USB_HACHINTEN = 0U; + USB_HACHINT = 0xFFFFFFFFU; + + /* flush out any leftover queued requests */ + for (i = 0U; i < pudev->cfg.host_channel_num; i++) { + USB_HCHxCTL(i) |= HCHCTL_CEN | HCHCTL_CDIS | HCHCTL_EPDIR; + } + + /* flush the FIFO */ + usb_rxfifo_flush(pudev); + usb_txfifo_flush(pudev, 0x10U); +} + +#endif /* USE_HOST_MODE */ + + +#ifdef USE_DEVICE_MODE + +/* USB endpoint Tx FIFO size */ +static uint16_t USBFS_TX_FIFO_SIZE[USBFS_MAX_DEV_EPCOUNT] = +{ + (uint16_t)TX0_FIFO_FS_SIZE, + (uint16_t)TX1_FIFO_FS_SIZE, + (uint16_t)TX2_FIFO_FS_SIZE, + (uint16_t)TX3_FIFO_FS_SIZE +}; + +static usb_status_enum usb_devint_enable(usb_core_handle_struct *pudev); + +/*! + \brief initialize USB core registers for device mode + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +usb_status_enum usb_devcore_init (usb_core_handle_struct *pudev) +{ + uint32_t i, ram_address = 0U; + __IO uint32_t devinep0intf = USB_DIEP0TFLEN; + __IO uint32_t devinepintf = 0U; + + /* restart the phy clock (maybe don't need to...) */ + USB_PWRCLKCTL = 0U; + + /* config periodic frmae interval to default */ + USB_DCFG &= ~DCFG_EOPFT; + USB_DCFG |= FRAME_INTERVAL_80; + + if (USB_FS_CORE_ID == pudev->cfg.core_id) { + /* set full speed PHY */ + USB_DCFG &= ~DCFG_DS; + USB_DCFG |= USB_SPEED_INP_FULL; + + /* set rx fifo size */ + USB_GRFLEN &= ~GRFLEN_RXFD; + USB_GRFLEN |= (uint32_t)RX_FIFO_FS_SIZE; + + /* set endpoint 0 tx fifo length and RAM address */ + devinep0intf &= ~DIEP0TFLEN_IEP0TXFD; + devinep0intf |= (uint32_t)TX0_FIFO_FS_SIZE << 16; + devinep0intf &= ~DIEP0TFLEN_IEP0TXRSAR; + devinep0intf |= (uint32_t)RX_FIFO_FS_SIZE; + + USB_DIEP0TFLEN = devinep0intf; + + ram_address = (uint32_t)RX_FIFO_FS_SIZE; + + /* set endpoint 1 to 3's tx fifo length and RAM address */ + for (i = 1U; i < USBFS_MAX_DEV_EPCOUNT; i++) { + ram_address += USBFS_TX_FIFO_SIZE[i - 1U]; + + devinepintf &= ~DIEPTFLEN_IEPTXFD; + devinepintf |= (uint32_t)USBFS_TX_FIFO_SIZE[i] << 16U; + devinepintf &= ~DIEPTFLEN_IEPTXRSAR; + devinepintf |= ram_address; + + USB_DIEPxTFLEN(i) = devinepintf; + } + } + + /* make sure all fifos are flushed */ + + /* flush all tx fifos */ + usb_txfifo_flush(pudev, 0x10U); + + /* flush entire rx fifo */ + usb_rxfifo_flush(pudev); + + /* clear all pending device interrupts */ + USB_DIEPINTEN = 0U; + USB_DOEPINTEN = 0U; + USB_DAEPINT = 0xFFFFFFFFU; + USB_DAEPINTEN = 0U; + + /* configure all in/out endpoints */ + for (i = 0U; i < pudev->cfg.dev_endp_num; i++) { + if (USB_DIEPxCTL(i) & DEPCTL_EPEN) { + USB_DIEPxCTL(i) |= DEPCTL_EPD | DEPCTL_SNAK; + } else { + USB_DIEPxCTL(i) = 0U; + } + + if (USB_DOEPxCTL(i) & DEPCTL_EPEN) { + USB_DOEPxCTL(i) |= DEPCTL_EPD | DEPCTL_SNAK; + } else { + USB_DOEPxCTL(i) = 0U; + } + + /* set in/out endpoint transfer length to 0 */ + USB_DIEPxLEN(i) = 0U; + USB_DOEPxLEN(i) = 0U; + + /* clear all pending in/out endpoints interrupts */ + USB_DIEPxINTF(i) = 0xFFU; + USB_DOEPxINTF(i) = 0xFFU; + } + + usb_devint_enable(pudev); + + return USB_OK; +} + +/*! + \brief enable the device mode interrupts + \param[in] pudev: pointer to usb device + \param[out] none + \retval status +*/ +static usb_status_enum usb_devint_enable(usb_core_handle_struct *pudev) +{ + uint32_t int_mask = 0U; + + /* disable all interrupts */ + USB_GINTEN = 0U; + + /* clear any pending interrupts */ + USB_GINTF = 0xBFFFFFFFU; + + /* enable the common interrupts */ + usb_commonint_enable(pudev); + + int_mask = GINTEN_RXFNEIE; + + /* enable device_mode-related interrupts */ + int_mask |= GINTEN_SPIE | GINTEN_RSTIE | GINTEN_ENUMFIE \ + | GINTEN_IEPIE | GINTEN_OEPIE | GINTEN_SOFIE | GINTEN_ISOONCIE \ + | GINTEN_ISOINCIE; + +#ifdef VBUS_SENSING_ENABLED + int_mask |= GINTEN_SESIE | GINTEN_OTGIE; +#endif /* VBUS_SENSING_ENABLED */ + + USB_GINTEN &= ~int_mask; + USB_GINTEN |= int_mask; + + return USB_OK; +} + +/*! + \brief configures endpoint 0 to receive setup packets + \param[in] pudev: pointer to usb device + \param[out] none + \retval none +*/ +void usb_ep0_startout(usb_core_handle_struct *pudev) +{ + __IO uint32_t ep0len = 0U; + + /* set out endpoint 0 receive length to 24 bytes */ + ep0len &= ~DOEP0LEN_TLEN; + ep0len |= 8U * 3U; + + /* set out endpoint 0 receive length to 1 packet */ + ep0len &= ~DOEP0LEN_PCNT; + ep0len |= 1U << 19; + + /* set setup packet count to 3 */ + ep0len &= ~DOEP0LEN_STPCNT; + ep0len |= 3U << 29; + + USB_DOEPxLEN(0U) = ep0len; +} + +/*! + \brief active remote wakeup signalling + \param[in] pudev: pointer to usb device + \param[out] none + \retval none +*/ +void usb_remotewakeup_active(usb_core_handle_struct *pudev) +{ + __IO uint32_t power_clock; + + if (pudev->dev.remote_wakeup) { + if (1U == (USB_DSTAT & DSTAT_SPST)) { + if (pudev->cfg.low_power) { + /* ungate USB core clock */ + power_clock = USB_PWRCLKCTL; + power_clock &= ~PWRCLKCTL_SHCLK; + power_clock &= ~PWRCLKCTL_SUCLK; + + USB_PWRCLKCTL = power_clock; + } + + /* active remote wakeup signaling */ + USB_DCTL |= DCTL_RWKUP; + + if (pudev->mdelay != (void *)0) { + pudev->mdelay(5U); + } + + USB_DCTL &= ~DCTL_RWKUP; + } + } +} + +/*! + \brief active USB core clock + \param[in] pudev: pointer to usb device + \param[out] none + \retval none +*/ +void usb_clock_ungate(usb_core_handle_struct *pudev) +{ + if (pudev->cfg.low_power) { + __IO uint32_t power_clock; + + if (1U == (USB_DSTAT & DSTAT_SPST)) { + /* un-gate USB core clock */ + power_clock = USB_PWRCLKCTL; + power_clock &= ~PWRCLKCTL_SHCLK; + power_clock &= ~PWRCLKCTL_SUCLK; + + USB_PWRCLKCTL = power_clock; + } + } +} + +/*! + \brief stop the device and clean up fifos + \param[in] pudev: pointer to usb device + \param[out] none + \retval none +*/ +void usb_device_stop (usb_core_handle_struct *pudev) +{ + uint32_t i; + + pudev->dev.status = 1U; + + for (i = 0U; i < pudev->cfg.dev_endp_num; i++) { + USB_DIEPxINTF(i) = 0xFFU; + USB_DOEPxINTF(i) = 0xFFU; + } + + USB_DIEPINTEN = 0U; + USB_DOEPINTEN = 0U; + USB_DAEPINTEN = 0U; + USB_DAEPINT = 0xFFFFFFFFU; + + /* flush the FIFO */ + usb_rxfifo_flush(pudev); + usb_txfifo_flush(pudev, 0x10U); +} +#endif /* USE_DEVICE_MODE */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_core.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_core.c new file mode 100644 index 0000000000000000000000000000000000000000..366b1bbb3bbe4287ed53577f09cdfc55695a68e7 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_core.c @@ -0,0 +1,503 @@ +/*! + \file usbd_core.c + \brief USB device mode core driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbd_core.h" +#include "usbd_std.h" + +/*! + \brief initailizes the USB device-mode handler stack + \param[in] pudev: pointer to usb device instance + \param[in] core_id: USB core ID + \param[out] none + \retval none +*/ +void usbd_init (usb_core_handle_struct *pudev, usb_core_id_enum core_id) +{ + /* select USB core */ + usb_core_select (pudev, core_id); + + pudev->dev.status = USB_STATUS_DEFAULT; + + /* disable USB global interrupt */ + USB_GLOBAL_INT_DISABLE(); + + /* init the core (common init.) */ + usb_core_init(pudev); + + /* force device mode*/ + usb_mode_set(pudev, DEVICE_MODE); + + /* set device disconnect */ + USB_SOFT_DISCONNECT_ENABLE(); + + if ((void *)0 != pudev->mdelay) { + pudev->mdelay(3U); + } + + /* init device */ + usb_devcore_init(pudev); + + /* set device Connect */ + USB_SOFT_DISCONNECT_DISABLE(); + + if ((void *)0 != pudev->mdelay) { + pudev->mdelay(3U); + } + + /* enable USB global interrupt */ + USB_GLOBAL_INT_ENABLE(); +} + +/*! + \brief endpoint initialization + \param[in] pudev: pointer to usb device instance + \param[in] ep_desc: pointer to usb endpoint descriptor + \param[out] none + \retval none +*/ +void usbd_ep_init (usb_core_handle_struct *pudev, const usb_descriptor_endpoint_struct *ep_desc) +{ + usb_ep_struct *ep; + usb_dir_enum ep_dir; + + uint32_t devepinten = 0U; + uint32_t devepctl = 0U; + + uint8_t ep_num = ep_desc->bEndpointAddress & 0x7FU; + uint8_t ep_type = ep_desc->bmAttributes & USB_EPTYPE_MASK; + uint16_t ep_mps = ep_desc->wMaxPacketSize; + + if (ep_desc->bEndpointAddress >> 7U) { + ep = &pudev->dev.in_ep[ep_num]; + + devepinten |= 1U << ep_num; + devepctl = USB_DIEPxCTL((uint16_t)ep_num); + + ep_dir = USB_TX; + } else { + ep = &pudev->dev.out_ep[ep_num]; + + devepinten |= (1U << ep_num) << 16U; + devepctl = USB_DOEPxCTL((uint16_t)ep_num); + + ep_dir = USB_RX; + } + + /* if the endpoint is not active, need change the endpoint control register */ + if (!(devepctl & DEPCTL_EPACT)) { + devepctl &= ~DEPCTL_MPL; + devepctl |= ep_mps; + + devepctl &= ~DEPCTL_EPTYPE; + devepctl |= (uint32_t)ep_type << 18U; + + if (USB_TX == ep_dir) { + devepctl &= ~DIEPCTL_TXFNUM; + devepctl |= (uint32_t)ep_num << 22U; + } + + devepctl |= DEPCTL_SD0PID; + devepctl |= DEPCTL_EPACT; + } + + if (USB_TX == ep_dir) { + USB_DIEPxCTL((uint16_t)ep_num) = devepctl; + } else if (USB_RX == ep_dir) { + USB_DOEPxCTL((uint16_t)ep_num) = devepctl; + } else { + /* no operation */ + } + + ep->endp_mps = ep_mps; + ep->endp_type = ep_type; + + /* enable the interrupts for this endpoint */ + USB_DAEPINTEN |= devepinten; +} + +/*! + \brief endpoint deinitialize + \param[in] pudev: pointer to usb device instance + \param[in] ep_addr: endpoint address + \param[out] none + \retval none +*/ +void usbd_ep_deinit (usb_core_handle_struct *pudev, uint8_t ep_addr) +{ + uint32_t devepinten = 0U; + uint8_t ep_num = ep_addr & 0x7FU; + + if (ep_addr >> 7U) { + devepinten |= 1U << ep_num; + + USB_DIEPxCTL((uint16_t)ep_num) &= ~DEPCTL_EPACT; + } else { + devepinten |= (1U << ep_num) << 16U; + + USB_DOEPxCTL((uint16_t)ep_num) &= ~DEPCTL_EPACT; + } + + /* disable the interrupts for this endpoint */ + USB_DAEPINTEN &= ~devepinten; +} + +/*! + \brief endpoint prepare to receive data + \param[in] pudev: pointer to usb device instance + \param[in] ep_addr: endpoint address + \param[in] pbuf: pointer to buffer + \param[in] buf_len: buffer length + \param[out] none + \retval none +*/ +void usbd_ep_rx (usb_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint16_t buf_len) +{ + usb_ep_struct *ep; + uint8_t ep_num = ep_addr & 0x7FU; + uint32_t devepctl = 0U, devepxlen = 0U; + + ep = &pudev->dev.out_ep[ep_num]; + + /* setup and start the Xfer */ + ep->xfer_buff = pbuf; + ep->xfer_len = buf_len; + ep->xfer_count = 0U; + + devepctl = USB_DOEPxCTL((uint16_t)ep_num); + devepxlen = USB_DOEPxLEN((uint16_t)ep_num); + + devepxlen &= ~DEPLEN_TLEN; + devepxlen &= ~DEPLEN_PCNT; + + /* zero length packet */ + if (0U == ep->xfer_len) { + /* set the transfer length to max packet size */ + devepxlen |= ep->endp_mps; + + /* set the transfer packet count to 1 */ + devepxlen |= 1U << 19U; + } else { + + if (0U == ep_num) { + /* set the transfer length to max packet size */ + devepxlen |= ep->endp_mps; + + /* set the transfer packet count to 1 */ + devepxlen |= 1U << 19U; + } else { + /* configure the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + devepxlen |= ((ep->xfer_len + ep->endp_mps - 1U) / ep->endp_mps) << 19U; + devepxlen |= ((devepxlen & DEPLEN_PCNT) >> 19U) * ep->endp_mps; + } + } + + USB_DOEPxLEN((uint16_t)ep_num) = devepxlen; + + if (USB_EPTYPE_ISOC == ep->endp_type) { + if (ep->endp_frame) { + devepctl |= DEPCTL_SODDFRM; + } else { + devepctl |= DEPCTL_SEVNFRM; + } + } + + /* enable the endpoint and clear the NAK */ + devepctl |= DEPCTL_EPEN | DEPCTL_CNAK; + + USB_DOEPxCTL((uint16_t)ep_num) = devepctl; +} + +/*! + \brief endpoint prepare to transmit data + \param[in] pudev: pointer to usb device instance + \param[in] ep_addr: endpoint address + \param[in] pbuf: pointer to buffer + \param[in] len: buffer length + \param[out] none + \retval none +*/ +void usbd_ep_tx (usb_core_handle_struct *pudev, uint8_t ep_addr, uint8_t *pbuf, uint32_t buf_len) +{ + usb_ep_struct *ep; + uint8_t ep_num = ep_addr & 0x7FU; + __IO uint32_t devepctl = 0U; + __IO uint32_t deveplen = 0U; + + ep = &pudev->dev.in_ep[ep_num]; + + /* setup and start the transfer */ + ep->xfer_buff = pbuf; + ep->xfer_len = buf_len; + ep->xfer_count = 0U; + + devepctl = USB_DIEPxCTL((uint16_t)ep_num); + deveplen = USB_DIEPxLEN((uint16_t)ep_num); + + /* clear transfer length to 0 */ + deveplen &= ~DEPLEN_TLEN; + + /* clear transfer packet to 0 */ + deveplen &= ~DEPLEN_PCNT; + + /* zero length packet */ + if (0U == ep->xfer_len) { + /* set transfer packet count to 1 */ + deveplen |= 1U << 19U; + } else { + if (0U == ep_num) { + if (ep->xfer_len > ep->endp_mps) { + ep->xfer_len = ep->endp_mps; + } + + deveplen |= 1U << 19U; + } else { + deveplen |= ((ep->xfer_len - 1U + ep->endp_mps) / ep->endp_mps) << 19U; + } + + /* configure the transfer size and packet count as follows: + * xfersize = N * maxpacket + short_packet + * pktcnt = N + (short_packet exist ? 1 : 0) + */ + deveplen |= ep->xfer_len; + + if (USB_EPTYPE_ISOC == ep->endp_type) { + deveplen |= DIEPLEN_MCNT & (1U << 29U); + } + } + + USB_DIEPxLEN((uint16_t)ep_num) = deveplen; + + if (USB_EPTYPE_ISOC == ep->endp_type) { + if (0U == (((USB_DSTAT & DSTAT_FNRSOF) >> 8U) & 0x1U)) { + devepctl |= DEPCTL_SODDFRM; + } else { + devepctl |= DEPCTL_SEVNFRM; + } + } + + /* enable the endpoint and clear the NAK */ + devepctl |= DEPCTL_EPEN | DEPCTL_CNAK; + + USB_DIEPxCTL((uint16_t)ep_num) = devepctl; + + if (USB_EPTYPE_ISOC != ep->endp_type) { + /* enable the Tx FIFO empty interrupt for this endpoint */ + if (ep->xfer_len > 0U) { + USB_DIEPFEINTEN |= 1U << ep_num; + } + } else { + usb_fifo_write(ep->xfer_buff, ep_num, (uint16_t)ep->xfer_len); + } +} + +/*! + \brief transmit data on the control channel + \param[in] pudev: pointer to usb device instance + \param[in] pbuf: pointer to buffer + \param[in] len: buffer length + \param[out] none + \retval usb device operation status +*/ +usbd_status_enum usbd_ctltx (usb_core_handle_struct *pudev, uint8_t *pbuf, uint16_t len) +{ + usbd_status_enum ret = USBD_OK; + + pudev->dev.sum_len = len; + pudev->dev.remain_len = len; + pudev->dev.ctl_status = USB_CTRL_DATA_IN; + + usbd_ep_tx (pudev, 0U, pbuf, (uint32_t)len); + + return ret; +} + +/*! + \brief receive data on the control channel + \param[in] pudev: pointer to usb device instance + \param[in] pbuf: pointer to buffer + \param[in] len: buffer length + \param[out] none + \retval usb device operation status +*/ +usbd_status_enum usbd_ctlrx (usb_core_handle_struct *pudev, uint8_t *pbuf, uint16_t len) +{ + pudev->dev.sum_len = len; + pudev->dev.remain_len = len; + pudev->dev.ctl_status = USB_CTRL_DATA_OUT; + + usbd_ep_rx (pudev, 0U, pbuf, len); + + return USBD_OK; +} + +/*! + \brief transmit status on the control channel + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval usb device operation status +*/ +usbd_status_enum usbd_ctlstatus_tx (usb_core_handle_struct *pudev) +{ + pudev->dev.ctl_status = USB_CTRL_STATUS_IN; + + usbd_ep_tx (pudev, 0U, NULL, 0U); + + usb_ep0_startout(pudev); + + return USBD_OK; +} + +/*! + \brief receive status on the control channel + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval usb device operation status +*/ +usbd_status_enum usbd_ctlstatus_rx (usb_core_handle_struct *pudev) +{ + pudev->dev.ctl_status = USB_CTRL_STATUS_OUT; + + usbd_ep_rx (pudev, 0U, NULL, 0U); + + usb_ep0_startout(pudev); + + return USBD_OK; +} + +/*! + \brief set an endpoint to STALL status + \param[in] pudev: pointer to usb device instance + \param[in] ep_addr: endpoint address + \param[out] none + \retval none +*/ +void usbd_ep_stall (usb_core_handle_struct *pudev, uint8_t ep_addr) +{ + uint8_t ep_num = ep_addr & 0x7FU; + __IO uint32_t devepctl = 0U; + + if (ep_addr >> 7U) { + devepctl = USB_DIEPxCTL((uint16_t)ep_num); + + /* set the endpoint disable bit */ + if (devepctl & DEPCTL_EPEN) { + devepctl |= DEPCTL_EPD; + } + + /* set the endpoint stall bit */ + devepctl |= DEPCTL_STALL; + + USB_DIEPxCTL((uint16_t)ep_num) = devepctl; + } else { + /* set the endpoint stall bit */ + USB_DOEPxCTL((uint16_t)ep_num) |= DEPCTL_STALL; + } +} + +/*! + \brief clear endpoint stalled status + \param[in] pudev: pointer to usb device instance + \param[in] ep_addr: endpoint address + \param[out] none + \retval none +*/ +void usbd_ep_clear_stall (usb_core_handle_struct *pudev, uint8_t ep_addr) +{ + usb_ep_struct *ep; + uint8_t ep_num = ep_addr & 0x7FU; + __IO uint32_t devepctl = 0U; + + if(ep_addr >> 7U){ + ep = &pudev->dev.in_ep[ep_num]; + + devepctl = USB_DIEPxCTL((uint16_t)ep_num); + + /* clear the in endpoint stall bits */ + devepctl &= ~DEPCTL_STALL; + + if ((USB_EPTYPE_INTR == ep->endp_type) || (USB_EPTYPE_BULK == ep->endp_type)) { + devepctl |= DEPCTL_SEVNFRM; + } + + USB_DIEPxCTL((uint16_t)ep_num) = devepctl; + } else { + ep = &pudev->dev.out_ep[ep_num]; + + devepctl = USB_DOEPxCTL((uint16_t)ep_num); + + /* clear the out endpoint stall bits */ + devepctl &= ~DEPCTL_STALL; + + if ((USB_EPTYPE_INTR == ep->endp_type) || (USB_EPTYPE_BULK == ep->endp_type)) { + devepctl |= DEPCTL_SEVNFRM; + } + + USB_DOEPxCTL((uint16_t)ep_num) = devepctl; + } +} + +/*! + \brief flushes the fifos + \param[in] pudev: pointer to usb device instance + \param[in] ep_addr: endpoint address + \param[out] none + \retval none +*/ +void usbd_ep_fifo_flush (usb_core_handle_struct *pudev, uint8_t ep_addr) +{ + if (ep_addr >> 7U) { + usb_txfifo_flush(pudev, ep_addr & 0x7FU); + } else { + usb_rxfifo_flush(pudev); + } +} + +/*! + \brief get the received data length + \param[in] pudev: pointer to usb device instance + \param[in] ep_num: endpoint identifier which is in (0..3) + \param[out] none + \retval received data length +*/ +uint16_t usbd_rxcount_get (usb_core_handle_struct *pudev, uint8_t ep_num) +{ + return (uint16_t)pudev->dev.out_ep[ep_num].xfer_count; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_int.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_int.c new file mode 100644 index 0000000000000000000000000000000000000000..668ef35cd7a10a2de1afb77c7752421aa0f24915 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_int.c @@ -0,0 +1,663 @@ +/*! + \file usbd_int.c + \brief USB device mode interrupt routines + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbd_int.h" +#include "usbd_std.h" + +/* interrupt handlers */ +static uint32_t usbd_intf_outep (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_inep (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_earlysuspend (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_suspend (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_resume (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_sof (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_rxfifo (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_reset (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_enumfinish (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_isoinincomplete (usb_core_handle_struct *pudev); +static uint32_t usbd_intf_isooutincomplete (usb_core_handle_struct *pudev); + +static uint32_t usbd_emptytxfifo_write (usb_core_handle_struct *pudev, uint8_t ep_num); + +#ifdef VBUS_SENSING_ENABLED + + static uint32_t usbd_intf_otg (usb_core_handle_struct *pudev); + static uint32_t usbd_intf_sessionrequest (usb_core_handle_struct *pudev); + +#endif /* VBUS_SENSING_ENABLED */ + +static usb_speed_enum USB_SPEED[4] = { + [DSTAT_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ] = USB_SPEED_HIGH, + [DSTAT_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ] = USB_SPEED_FULL, + [DSTAT_ENUMSPD_FS_PHY_48MHZ] = USB_SPEED_FULL, + [DSTAT_ENUMSPD_LS_PHY_6MHZ] = USB_SPEED_LOW +}; + +static const uint8_t EP0_MAXLEN[4] = { + [DSTAT_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ] = EP0MPL_64, + [DSTAT_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ] = EP0MPL_64, + [DSTAT_ENUMSPD_FS_PHY_48MHZ] = EP0MPL_64, + [DSTAT_ENUMSPD_LS_PHY_6MHZ] = EP0MPL_8 +}; + +/*! + \brief USB device-mode interrupts global service routine handler + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +uint32_t usbd_isr (usb_core_handle_struct *pudev) +{ + uint32_t retval = 0U; + uint32_t int_status = 0U, gintf = USB_GINTF, ginten = USB_GINTEN; + + /* ensure the core is in device mode */ + if (DEVICE_MODE == USB_CURRENT_MODE_GET()) { + int_status = gintf & ginten; + + /* there are no interrupts, avoid spurious interrupt */ + if (!int_status) { + return 0U; + } + + /* OUT endpoints interrupts */ + if (int_status & GINTF_OEPIF) { + retval |= usbd_intf_outep(pudev); + } + + /* IN endpoints interrupts */ + if (int_status & GINTF_IEPIF) { + retval |= usbd_intf_inep(pudev); + } + + /* mode mismatch interrupt */ + if (int_status & GINTF_MFIF) { + /* clear interrupt */ + USB_GINTF = GINTF_MFIF; + } + + /* early suspend interrupt */ + if (int_status & GINTF_ESP) { + retval |= usbd_intf_earlysuspend(pudev); + } + + /* suspend interrupt */ + if (int_status & GINTF_SP) { + retval |= usbd_intf_suspend(pudev); + } + + /* wakeup interrupt */ + if (int_status & GINTF_WKUPIF) { + retval |= usbd_intf_resume(pudev); + } + + /* start of frame interrupt */ + if (int_status & GINTF_SOF) { + retval |= usbd_intf_sof(pudev); + } + + /* reveive fifo not empty interrupt */ + if (int_status & GINTF_RXFNEIF) { + retval |= usbd_intf_rxfifo(pudev); + } + + /* USB reset interrupt */ + if (int_status & GINTF_RST) { + retval |= usbd_intf_reset(pudev); + } + + /* enumeration has been finished interrupt */ + if (int_status & GINTF_ENUMF) { + retval |= usbd_intf_enumfinish(pudev); + } + + /* incomplete synchronization in transfer interrupt*/ + if (int_status & GINTF_ISOINCIF) { + retval |= usbd_intf_isoinincomplete(pudev); + } + + /* incomplete synchronization out transfer interrupt*/ + if (int_status & GINTF_ISOONCIF) { + retval |= usbd_intf_isooutincomplete(pudev); + } + +#ifdef VBUS_SENSING_ENABLED + + /* session request interrupt */ + if (int_status & GINTF_SESIF) { + retval |= usbd_intf_sessionrequest(pudev); + } + + /* OTG mode interrupt */ + if (int_status & GINTF_OTGIF) { + retval |= usbd_intf_otg(pudev); + } +#endif /* VBUS_SENSING_ENABLED */ + } + + return retval; +} + +/*! + \brief indicates that an OUT endpoint has a pending interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbd_intf_outep (usb_core_handle_struct *pudev) +{ + uint8_t endp_num = 0U; + uint32_t endp_intr = 0U; + + __IO uint32_t out_endp_intr = 0U; + + /* read in the device interrupt bits */ + USB_DAOEP_INTR_READ(endp_intr); + + while (endp_intr) { + if (endp_intr & 0x1U) { + USB_DOEP_INTR_READ(out_endp_intr, (uint16_t)endp_num); + + /* transfer complete interrupt */ + if (out_endp_intr & DOEPINTF_TF) { + USB_DOEPxINTF((uint16_t)endp_num) = DOEPINTF_TF; + + /* data receive is completed */ + usbd_out_transaction(pudev, endp_num); + } + + /* endpoint disable interrupt */ + if (out_endp_intr & DOEPINTF_EPDIS) { + USB_DOEPxINTF((uint16_t)endp_num) = DOEPINTF_EPDIS; + } + + /* setup phase finished interrupt (just for control endpoints) */ + if (out_endp_intr & DOEPINTF_STPF) { + /* setup phase is completed */ + usbd_setup_transaction(pudev); + + USB_DOEPxINTF((uint16_t)endp_num) = DOEPINTF_STPF; + } + + /* back to back setup packets received */ + if (out_endp_intr & DOEPINTF_BTBSTP) { + USB_DOEPxINTF((uint16_t)endp_num) = DOEPINTF_BTBSTP; + } + } + + endp_num ++; + endp_intr >>= 1; + } + + return 1U; +} + +/*! + \brief indicates that an in endpoint has a pending interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbd_intf_inep(usb_core_handle_struct *pudev) +{ + uint8_t endp_num = 0U; + uint32_t endp_intr = 0U; + + __IO uint32_t in_endp_intr = 0U; + + /* get all in endpoints which have interrupts */ + USB_DAIEP_INTR_READ(endp_intr); + + while (endp_intr) { + if (endp_intr & 0x1U) { + USB_DIEP_INTR_READ(in_endp_intr, (uint16_t)endp_num); + + if (in_endp_intr & DIEPINTF_TF) { + /* disable the fifo empty interrupt for the endpoint */ + USB_DIEPFEINTEN &= ~(0x1U << endp_num); + + USB_DIEPxINTF((uint16_t)endp_num) = DIEPINTF_TF; + + /* data transmittion is completed */ + usbd_in_transaction(pudev, endp_num); + } + + if (in_endp_intr & DIEPINTF_CITO) { + USB_DIEPxINTF((uint16_t)endp_num) = DIEPINTF_CITO; + } + + if (in_endp_intr & DIEPINTF_IEPNE) { + USB_DIEPxINTF((uint16_t)endp_num) = DIEPINTF_IEPNE; + } + + if (in_endp_intr & DIEPINTF_EPDIS) { + USB_DIEPxINTF((uint16_t)endp_num) = DIEPINTF_EPDIS; + } + + if (in_endp_intr & DIEPINTF_TXFE) { + usbd_emptytxfifo_write(pudev, endp_num); + USB_DIEPxINTF((uint16_t)endp_num) = DIEPINTF_TXFE; + } + } + + endp_num ++; + endp_intr >>= 1; + } + + return 1U; +} + +/*! + \brief indicates that early suspend state has been detected on the USB + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbd_intf_earlysuspend (usb_core_handle_struct *pudev) +{ + USB_GINTEN &= ~GINTEN_ESPIE; + USB_GINTF = GINTF_ESP; + + return 1U; +} + +/*! + \brief indicates that suspend state has been detected on the USB + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbd_intf_suspend(usb_core_handle_struct *pudev) +{ + __IO uint8_t low_power = pudev->cfg.low_power; + __IO uint8_t suspend = (uint8_t)(USB_DSTAT & DSTAT_SPST); + __IO uint8_t is_configured = (pudev->dev.status == USB_STATUS_CONFIGURED)? 1U : 0U; + + pudev->dev.prev_status = pudev->dev.status; + pudev->dev.status = USB_STATUS_SUSPENDED; + + if (low_power && suspend && is_configured) { + /* switch-off the otg clocks */ + USB_PWRCLKCTL |= PWRCLKCTL_SUCLK | PWRCLKCTL_SHCLK; + + /* enter DEEP_SLEEP mode with LDO in low power mode */ + pmu_to_deepsleepmode(PMU_LDO_LOWPOWER, WFI_CMD); + } + + /* clear interrupt */ + USB_GINTF = GINTF_SP; + + return 1U; +} + +/*! + \brief indicates that the USB controller has detected a resume or remote Wake-up sequence + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbd_intf_resume (usb_core_handle_struct *pudev) +{ + pudev->dev.status = pudev->dev.prev_status; + pudev->dev.status = USB_STATUS_CONFIGURED; + + /* clear interrupt */ + USB_GINTF = GINTF_WKUPIF; + + return 1U; +} + +/*! + \brief handle the SOF interrupts + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbd_intf_sof(usb_core_handle_struct *pudev) +{ + if (NULL != usbd_int_fops) { + usbd_int_fops->SOF(pudev); + } + + USB_GINTF = GINTF_SOF; + + return 1U; +} + +/*! + \brief handle the rx status queue level interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbd_intf_rxfifo (usb_core_handle_struct *pudev) +{ + usb_ep_struct *ep; + uint8_t data_pid = 0U, endp_num = 0U; + uint32_t bcount = 0U, packet_num = 0U; + + /* get the status from the top of the fifo (must be read to a variable) */ + __IO uint32_t rx_status = USB_GRSTATP; + + /* disable the rx fifo non-empty interrupt */ + USB_GINTEN &= ~GINTEN_RXFNEIE; + + endp_num = (uint8_t)(rx_status & GRSTATRP_EPNUM); + bcount = (rx_status & GRSTATRP_BCOUNT) >> 4U; + data_pid = (uint8_t)((rx_status & GRSTATRP_DPID) >> 15U); + + /* ensure no-DMA mode can work */ + packet_num = USB_DOEPxLEN((uint16_t)endp_num) & DEPLEN_PCNT; + if ((1U == endp_num) && (0U == packet_num)) { + uint32_t devepctl = USB_DOEPxCTL((uint16_t)endp_num); + + devepctl |= DEPCTL_SNAK; + devepctl &= ~DEPCTL_EPEN; + devepctl &= ~DEPCTL_EPD; + + USB_DOEPxCTL((uint16_t)endp_num) = devepctl; + } + + ep = &pudev->dev.out_ep[endp_num]; + + switch ((rx_status & GRSTATRP_RPCKST) >> 17U) { + case RXSTAT_GOUT_NAK: + break; + case RXSTAT_DATA_UPDT: + if (bcount > 0U) { + usb_fifo_read(ep->xfer_buff, (uint16_t)bcount); + ep->xfer_buff += bcount; + ep->xfer_count += bcount; + } + break; + case RXSTAT_XFER_COMP: + break; + case RXSTAT_SETUP_COMP: + break; + case RXSTAT_SETUP_UPDT: + *(uint32_t *)0x5000081CU |= 0x00020000U; + if ((0U == endp_num) && (8U == bcount) && (DPID_DATA0 == data_pid)) { + /* copy the setup packet received in fifo into the setup buffer in ram */ + usb_fifo_read(pudev->dev.setup_packet, 8U); + + ep->xfer_count += bcount; + } + break; + default: + break; + } + + /* enable the rx fifo non-empty interrupt */ + USB_GINTEN |= GINTEN_RXFNEIE; + + return 1U; +} + +/*! + \brief handle USB reset interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval status +*/ +static uint32_t usbd_intf_reset(usb_core_handle_struct *pudev) +{ + uint8_t i = 0U; + usb_ep_struct *ep; + + /* clear the remote wakeup signaling */ + USB_DCTL &= ~DCTL_RWKUP; + + /* flush the tx fifo */ + usb_txfifo_flush(pudev, 0U); + + for (i = 0U; i < pudev->cfg.dev_endp_num; i++) { + USB_DIEPxINTF((uint16_t)i) = 0xFFU; + USB_DOEPxINTF((uint16_t)i) = 0xFFU; + } + + /* clear all pending device endpoint interrupts */ + USB_DAEPINT = 0xFFFFFFFFU; + + /* enable endpoint 0 interrupts */ + USB_DAEPINTEN &= ~DAEPINTEN_OEPIE; + USB_DAEPINTEN &= ~DAEPINTEN_IEPIE; + USB_DAEPINTEN = (1U << 16) | 1U; + + /* enable out endpoint interrupts */ + USB_DOEPINTEN = DOEPINTEN_STPFEN | DOEPINTEN_TFEN | DOEPINTEN_EPDISEN; + + /* enable in endpoint interrupts */ + USB_DIEPINTEN = DIEPINTEN_TFEN | DIEPINTEN_CITOEN | DIEPINTEN_EPDISEN; + + /* reset device address */ + USB_DCFG &= ~DCFG_DAR; + USB_DCFG |= 0U << 4U; + + /* configure endpoint 0 to receive setup packets */ + usb_ep0_startout(pudev); + + /* clear usb reset interrupt */ + USB_GINTF = GINTF_RST; + + /* open EP0 IN */ + ep = &pudev->dev.in_ep[0]; + + USB_DIEPxCTL(0U) &= ~DEP0CTL_MPL; + USB_DIEPxCTL(0U) &= ~DEPCTL_EPTYPE; + USB_DIEPxCTL(0U) &= ~DIEPCTL_TXFNUM; + + if (!(USB_DIEPxCTL(0U) & DEP0CTL_EPACT)) { + USB_DIEPxCTL(0U) |= USB_MAX_EP0_SIZE; + USB_DIEPxCTL(0U) |= (USB_EPTYPE_CTRL << 18U); + USB_DIEPxCTL(0U) |= DEP0CTL_EPACT; + } + + ep->endp_mps = USB_MAX_EP0_SIZE; + ep->endp_type = USB_EPTYPE_CTRL; + + /* open EP0 OUT */ + ep = &pudev->dev.out_ep[0]; + + USB_DOEPxCTL(0U) &= ~DEP0CTL_MPL; + USB_DOEPxCTL(0U) &= ~DEPCTL_EPTYPE; + + if (!(USB_DOEPxCTL(0U) & DEP0CTL_EPACT)) { + USB_DOEPxCTL(0U) |= USB_MAX_EP0_SIZE; + USB_DOEPxCTL(0U) |= (USB_EPTYPE_CTRL << 18U); + USB_DOEPxCTL(0U) |= DEP0CTL_EPACT; + } + + ep->endp_mps = USB_MAX_EP0_SIZE; + ep->endp_type = USB_EPTYPE_CTRL; + + pudev->dev.status = USB_STATUS_DEFAULT; + + return 1U; +} + +/*! + \brief handle enumeration finish interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval status +*/ +static uint32_t usbd_intf_enumfinish(usb_core_handle_struct *pudev) +{ + uint8_t enum_speed = (uint8_t)((USB_DSTAT & DSTAT_ES) >> 1U); + + /* set the max packet size of devie in endpoint based on the enumeration speed */ + USB_DIEPxCTL(0U) |= EP0_MAXLEN[enum_speed]; + + /* clear global in NAK */ + USB_DCTL &= ~DCTL_CGINAK; + USB_DCTL |= DCTL_CGINAK; + + /* set USB turn-around time based on device speed and PHY interface */ + if (USB_SPEED_HIGH == USB_SPEED[enum_speed]) { + pudev->cfg.core_speed = USB_CORE_SPEED_HIGH; + pudev->cfg.max_packet_size = USBHS_MAX_PACKET_SIZE; + + USB_GUSBCS &= ~GUSBCS_UTT; + USB_GUSBCS |= 0x09U << 10; + } else { + pudev->cfg.core_speed = USB_CORE_SPEED_FULL; + pudev->cfg.max_packet_size = USBFS_MAX_PACKET_SIZE; + + USB_GUSBCS &= ~GUSBCS_UTT; + USB_GUSBCS |= 0x05U << 10; + } + + /* clear interrupt */ + USB_GINTF = GINTF_ENUMF; + + return 1U; +} + +/*! + \brief handle the ISO in incomplete interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval status +*/ +static uint32_t usbd_intf_isoinincomplete(usb_core_handle_struct *pudev) +{ + + /* clear interrupt */ + USB_GINTF = GINTF_ISOINCIF; + + return 1U; +} + +/*! + \brief handle the ISO OUT incomplete interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval status +*/ +static uint32_t usbd_intf_isooutincomplete(usb_core_handle_struct *pudev) +{ + /* clear interrupt */ + USB_GINTF = GINTF_ISOONCIF; + + return 1U; +} + +/*! + \brief check FIFO for the next packet to be loaded + \param[in] pudev: pointer to usb device instance + \param[in] ep_id: endpoint identifier which is in (0..3) + \param[out] none + \retval status +*/ +static uint32_t usbd_emptytxfifo_write(usb_core_handle_struct *pudev, uint8_t ep_num) +{ + uint32_t len = 0U, word_len = 0U, fifo_empty_mask = 0U; + usb_ep_struct *ep; + + ep = &pudev->dev.in_ep[ep_num]; + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->endp_mps) { + len = ep->endp_mps; + } + + word_len = (len + 3U) / 4U; + + while (((USB_DIEPxTFSTAT((uint16_t)ep_num) & DIEPTFSTAT_IEPTFS) > word_len) && + (ep->xfer_count < ep->xfer_len)) { + /* write the FIFO */ + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->endp_mps) { + len = ep->endp_mps; + } + + word_len = (len + 3U) / 4U; + + usb_fifo_write (ep->xfer_buff, ep_num, (uint16_t)len); + + ep->xfer_buff += len; + ep->xfer_count += len; + + if(ep->xfer_len == ep->xfer_count) { + fifo_empty_mask = 0x1U << ep_num; + USB_DIEPFEINTEN &= ~fifo_empty_mask; + } + } + + return 1U; +} + +#ifdef VBUS_SENSING_ENABLED + +/*! + \brief indicates that the USB_OTG controller has detected a connection + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval status +*/ +static uint32_t usbd_intf_sessionrequest(usb_core_handle_struct *pudev) +{ + pudev->dev.connection_status = 1U; + + /* clear the interrupt bit */ + USB_GINTF = GINTF_SESIF; + + return 1; +} + +/*! + \brief indicates that the USB_OTG controller has detected an OTG event + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval status +*/ +static uint32_t usbd_intf_otg(usb_core_handle_struct *pudev) +{ + if (USB_GOTGINTF & GOTGINTF_SESEND) { + pudev->dev.class_deinit(pudev, 0); + pudev->dev.connection_status = 0; + } + + /* clear OTG interrupt */ + USB_GOTGINTF |= GOTGINTF_SESEND; + + return 1; +} + +#endif /* VBUS_SENSING_ENABLED */ diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_std.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_std.c new file mode 100644 index 0000000000000000000000000000000000000000..33ad7a94b64ef5797183209a6a1e83daa99cbfb5 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbd_std.c @@ -0,0 +1,727 @@ +/*! + \file usbd_std.c + \brief USB 2.0 standard handler driver + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbd_std.h" +#include "usb_core.h" + +static usbd_status_enum usbd_standard_request (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static usbd_status_enum usbd_device_class_request (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static usbd_status_enum usbd_vendor_request (usb_core_handle_struct *pudev, usb_device_req_struct *req); + +static void usbd_setup_request_parse(usb_core_handle_struct *pudev, usb_device_req_struct *req); + +static void usbd_getdescriptor (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setaddress (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setconfig (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_getconfig (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_getstatus (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setfeature (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_clrfeature (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_reserved (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setdescriptor (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_getinterface (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_setinterface (usb_core_handle_struct *pudev, usb_device_req_struct *req); +static void usbd_synchframe (usb_core_handle_struct *pudev, usb_device_req_struct *req); + +static uint8_t* usbd_device_descriptor_get (usb_core_handle_struct *pudev, uint8_t index, uint16_t *pLen); +static uint8_t* usbd_configuration_descriptor_get (usb_core_handle_struct *pudev, uint8_t index, uint16_t *pLen); +static uint8_t* usbd_string_descriptor_get (usb_core_handle_struct *pudev, uint8_t index, uint16_t *pLen); + +static void (*StandardDeviceRequest[])(usb_core_handle_struct *pudev, usb_device_req_struct *req) = +{ + usbd_getstatus, + usbd_clrfeature, + usbd_reserved, + usbd_setfeature, + usbd_reserved, + usbd_setaddress, + usbd_getdescriptor, + usbd_setdescriptor, + usbd_getconfig, + usbd_setconfig, + usbd_getinterface, + usbd_setinterface, + usbd_synchframe, +}; + +/* get standard descriptor handler */ +static uint8_t* (*standard_descriptor_get[])(usb_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) = +{ + usbd_device_descriptor_get, + usbd_configuration_descriptor_get, + usbd_string_descriptor_get +}; + +/*! + \brief USB setup stage processing + \param[in] pudev: pointer to USB device instance + \param[out] none + \retval USB device operation status +*/ +usbd_status_enum usbd_setup_transaction(usb_core_handle_struct *pudev) +{ + usb_device_req_struct req; + + usbd_setup_request_parse(pudev, &req); + + switch (req.bmRequestType & USB_REQ_MASK) { + /* standard device request */ + case USB_STANDARD_REQ: + usbd_standard_request(pudev, &req); + break; + /* device class request */ + case USB_CLASS_REQ: + usbd_device_class_request(pudev, &req); + break; + /* vendor defined request */ + case USB_VENDOR_REQ: + usbd_vendor_request(pudev, &req); + break; + default: + usbd_ep_stall(pudev, req.bmRequestType & 0x80U); + break; + } + + return USBD_OK; +} + +/*! + \brief data out stage processing + \param[in] pudev: pointer to USB device instance + \param[in] ep_id: endpoint identifier(0..7) + \param[out] none + \retval USB device operation status +*/ +usbd_status_enum usbd_out_transaction (usb_core_handle_struct *pudev, uint8_t endp_num) +{ + usb_ep_struct *ep; + + if (0U == endp_num) { + ep = &pudev->dev.out_ep[0]; + + if (USB_CTRL_DATA_OUT == pudev->dev.ctl_status) { + if (pudev->dev.remain_len > ep->endp_mps) { + pudev->dev.remain_len -= ep->endp_mps; + + usbd_ep_rx (pudev, + 0U, + ep->xfer_buff, + (uint16_t)USB_MIN(pudev->dev.remain_len, ep->endp_mps)); + } else { + if (USB_STATUS_CONFIGURED == pudev->dev.status) { + pudev->dev.class_data_handler(pudev, USB_RX, 0U); + } + + usbd_ctlstatus_tx(pudev); + } + } + } else if (USB_STATUS_CONFIGURED == pudev->dev.status) { + pudev->dev.class_data_handler(pudev, USB_RX, endp_num); + } else { + /* no operation */ + } + + return USBD_OK; +} + +/*! + \brief data in stage processing + \param[in] pudev: pointer to USB device instance + \param[in] ep_id: endpoint identifier(0..7) + \param[out] none + \retval USB device operation status +*/ +usbd_status_enum usbd_in_transaction (usb_core_handle_struct *pudev, uint8_t endp_num) +{ + usb_ep_struct *ep; + + if (0U == endp_num) { + ep = &pudev->dev.in_ep[0]; + + if (USB_CTRL_DATA_IN == pudev->dev.ctl_status) { + if (pudev->dev.remain_len > ep->endp_mps) { + pudev->dev.remain_len -= ep->endp_mps; + + usbd_ep_tx (pudev, 0U, ep->xfer_buff, pudev->dev.remain_len); + + usbd_ep_rx (pudev, 0U, NULL, 0U); + } else { + /* last packet is MPS multiple, so send ZLP packet */ + if ((pudev->dev.sum_len % ep->endp_mps == 0U) && + (pudev->dev.sum_len >= ep->endp_mps) && + (pudev->dev.sum_len < pudev->dev.ctl_len)) { + usbd_ep_tx (pudev, 0U, NULL, 0U); + pudev->dev.ctl_len = 0U; + + usbd_ep_rx (pudev, 0U, NULL, 0U); + } else { + if (USB_STATUS_CONFIGURED == pudev->dev.status) { + pudev->dev.class_data_handler(pudev, USB_TX, 0U); + } + + usbd_ctlstatus_rx(pudev); + } + } + } + } else if (USB_STATUS_CONFIGURED == pudev->dev.status) { + pudev->dev.class_data_handler(pudev, USB_TX, endp_num); + } else { + /* no operation */ + } + + return USBD_OK; +} + +/*! + \brief handle USB standard device request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval USB device operation status +*/ +static usbd_status_enum usbd_standard_request (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* call device request handle function */ + (*StandardDeviceRequest[req->bRequest])(pudev, req); + + return USBD_OK; +} + +/*! + \brief handle USB device class request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device class request + \param[out] none + \retval USB device operation status +*/ +static usbd_status_enum usbd_device_class_request (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + usbd_status_enum ret = USBD_OK; + + switch (pudev->dev.status) { + case USB_STATUS_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + ret = (usbd_status_enum)(pudev->dev.class_req_handler(pudev, req)); + + if ((0U == req->wLength) && (USBD_OK == ret)) { + /* no data stage */ + usbd_ctlstatus_tx(pudev); + } + } else { + usbd_enum_error(pudev, req); + } + break; + + default: + usbd_enum_error(pudev, req); + break; + } + + return ret; +} + +/*! + \brief handle USB vendor request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB vendor request + \param[out] none + \retval USB device operation status +*/ +static usbd_status_enum usbd_vendor_request (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* added by user... */ + + return USBD_OK; +} + +/*! + \brief no operation, just for reserved + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_reserved (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* no operation... */ +} + +/*! + \brief get the device descriptor + \brief[in] index: no use + \param[in] none + \param[out] pLen: data length pointer + \retval descriptor buffer pointer +*/ +static uint8_t* usbd_device_descriptor_get (usb_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) +{ + *pLen = pudev->dev.dev_desc[0]; + + return pudev->dev.dev_desc; +} + +/*! + \brief get the configuration descriptor + \brief[in] index: no use + \param[in] none + \param[out] pLen: data length pointer + \retval descriptor buffer pointer +*/ +static uint8_t* usbd_configuration_descriptor_get (usb_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) +{ + *pLen = pudev->dev.config_desc[2]; + + return pudev->dev.config_desc; +} + +/*! + \brief get string descriptor + \param[in] index: string descriptor index + \param[in] pLen: pointer to string length + \param[out] none + \retval none +*/ +static uint8_t* usbd_string_descriptor_get (usb_core_handle_struct *pudev, uint8_t index, uint16_t *pLen) +{ + uint8_t *desc = pudev->dev.strings[index]; + + *pLen = desc[0]; + + return desc; +} + +/*! + \brief handle Get_Status request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getstatus (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ +} + +/*! + \brief handle USB Clear_Feature request + \param[in] pudev: pointer to USB device instance + \param[in] req: USB device request + \param[out] none + \retval none +*/ +static void usbd_clrfeature (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t ep_addr = 0U; + + switch (req->bmRequestType & USB_REQTYPE_MASK) { + /* process device feature */ + case USB_REQTYPE_DEVICE: + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + case USB_STATUS_CONFIGURED: + if (USB_FEATURE_REMOTE_WAKEUP == req->wValue) { + pudev->dev.remote_wakeup = 0U; + pudev->dev.class_req_handler(pudev, req); + + usbd_ctlstatus_tx(pudev); + } + break; + + default: + usbd_enum_error(pudev, req); + break; + } + break; + /* process interface feature */ + case USB_REQTYPE_INTERFACE: + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + usbd_enum_error(pudev, req); + break; + case USB_STATUS_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + /* no operation */ + } else { + usbd_enum_error(pudev, req); + } + break; + default: + break; + } + break; + /* process endpoint feature */ + case USB_REQTYPE_ENDPOINT: + ep_addr = LOWBYTE(req->wIndex); + + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + if (IS_NOT_EP0(ep_addr)) { + usbd_ep_stall(pudev, ep_addr); + } + break; + case USB_STATUS_CONFIGURED: + if (USB_FEATURE_ENDP_HALT == req->wValue) { + if (IS_NOT_EP0(ep_addr)) { + usbd_ep_clear_stall(pudev, ep_addr); + + pudev->dev.class_req_handler(pudev, req); + } + } + usbd_ctlstatus_tx(pudev); + break; + default: + break; + } + break; + default: + usbd_enum_error(pudev, req); + break; + } +} + +/*! + \brief handle USB Set_Feature request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setfeature (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t ep_addr = 0U; + __IO uint32_t DctlrStatus; + + switch (req->bmRequestType & USB_REQ_MASK) { + /* process device feature */ + case USB_REQTYPE_DEVICE: + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + case USB_STATUS_CONFIGURED: + if (USB_FEATURE_REMOTE_WAKEUP == req->wValue) { + pudev->dev.remote_wakeup = 1U; + pudev->dev.class_req_handler(pudev, req); + + usbd_ctlstatus_tx(pudev); + } else if ((req->wValue == USB_FEATURE_TEST_MODE) && + (0U == (req->wIndex & 0xFFU))) { + DctlrStatus = USB_DCTL; + + usbd_ctlstatus_tx(pudev); + } else { + /* no operation */ + } + break; + default: + break; + } + break; + /* process interface feature */ + case USB_REQTYPE_INTERFACE: + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + usbd_enum_error(pudev, req); + break; + case USB_STATUS_CONFIGURED: + if (LOWBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) { + /* no operation */ + } else { + usbd_enum_error(pudev, req); + } + break; + default: + break; + } + break; + /* process endpoint feature */ + case USB_REQTYPE_ENDPOINT: + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + if (IS_NOT_EP0(ep_addr)) { + usbd_ep_stall(pudev, ep_addr); + } + break; + case USB_STATUS_CONFIGURED: + if (USB_FEATURE_ENDP_HALT == req->wValue) { + if (IS_NOT_EP0(ep_addr)) { + usbd_ep_stall(pudev, ep_addr); + } + } + pudev->dev.class_req_handler(pudev, req); + + usbd_ctlstatus_tx(pudev); + break; + default: + break; + } + break; + default: + usbd_enum_error(pudev, req); + break; + } +} + +/*! + \brief handle USB Set_Address request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setaddress (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t DevAddr; + + if ((0U == req->wIndex) && (0U == req->wLength)) { + DevAddr = (uint8_t)(req->wValue) & 0x7FU; + + if (USB_STATUS_CONFIGURED == pudev->dev.status) { + usbd_enum_error(pudev, req); + } else { + USB_SET_DEVADDR((uint32_t)DevAddr); + + usbd_ctlstatus_tx(pudev); + + if (0U != DevAddr) { + pudev->dev.status = USB_STATUS_ADDRESSED; + } else { + pudev->dev.status = USB_STATUS_DEFAULT; + } + } + } else { + usbd_enum_error(pudev, req); + } +} + +/*! + \brief handle USB Get_Descriptor request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getdescriptor (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + if (USB_REQTYPE_DEVICE == (req->bmRequestType & USB_REQTYPE_MASK)) { + uint8_t desc_type = (uint8_t)(req->wValue >> 8); + uint8_t desc_index = (uint8_t)(req->wValue) & 0xFFU; + + if ((desc_type <= 0x03U) && (desc_index <= 0x05U)) { + uint16_t len; + uint8_t *pbuf; + + /* call corresponding descriptor get function */ + pbuf = standard_descriptor_get[desc_type - 1U](pudev, desc_index, &len); + + if ((0U != len) && (0U != req->wLength)) { + len = USB_MIN(len, req->wLength); + + if ((1U == desc_type) && (64U == req->wLength)) { + len = 8U; + } + + usbd_ctltx(pudev, pbuf, len); + } + } else { + usbd_enum_error(pudev, req); + } + } else if (USB_REQTYPE_INTERFACE == (req->bmRequestType & USB_REQTYPE_MASK)) { + pudev->dev.class_req_handler(pudev, req); + } else { + /* no operation */ + } +} + +/*! + \brief handle USB Set_Descriptor request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setdescriptor (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* no handle... */ +} + +/*! + \brief handle USB Get_Configuration request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getconfig (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint32_t USBD_default_config = 0U; + + if (1U != req->wLength) { + usbd_enum_error(pudev, req); + } else { + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + usbd_ctltx(pudev, (uint8_t *)&USBD_default_config, 1U); + break; + case USB_STATUS_CONFIGURED: + usbd_ctltx(pudev, &pudev->dev.config_num, 1U); + break; + default: + usbd_enum_error(pudev, req); + break; + } + } +} + +/*! + \brief handle USB Set_Configuration request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setconfig (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + /* if config index is more than configuration max number */ + if (cfgidx > USBD_CFG_MAX_NUM) { + usbd_enum_error(pudev, req); + } else { + switch (pudev->dev.status) { + case USB_STATUS_ADDRESSED: + if (cfgidx) { + pudev->dev.config_num = cfgidx; + pudev->dev.status = USB_STATUS_CONFIGURED; + pudev->dev.class_init(pudev, cfgidx); + } + + usbd_ctlstatus_tx(pudev); + break; + case USB_STATUS_CONFIGURED: + if (0U == cfgidx) { + pudev->dev.status = USB_STATUS_ADDRESSED; + pudev->dev.config_num = cfgidx; + pudev->dev.class_deinit(pudev, cfgidx); + } else if (cfgidx != pudev->dev.config_num) { + /* clear old configuration */ + pudev->dev.class_deinit(pudev, pudev->dev.config_num); + + /* set new configuration */ + pudev->dev.config_num = cfgidx; + pudev->dev.class_init(pudev, cfgidx); + } else { + /* no operation */ + } + + usbd_ctlstatus_tx(pudev); + break; + default: + usbd_enum_error(pudev, req); + break; + } + } +} + +/*! + \brief handle USB Get_Interface request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_getinterface (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + pudev->dev.class_req_handler(pudev, req); +} + +/*! + \brief handle USB Set_Interface request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setinterface (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + pudev->dev.class_req_handler(pudev, req); +} + +/*! + \brief handle USB SynchFrame request + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_synchframe (usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + /* no handle... */ +} + +/*! + \brief decode setup data packet + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +static void usbd_setup_request_parse(usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + uint8_t *psetup = pudev->dev.setup_packet; + + req->bmRequestType = *psetup; + req->bRequest = *(uint8_t *)(psetup + 1U); + req->wValue = SWAPBYTE (psetup + 2U); + req->wIndex = SWAPBYTE (psetup + 4U); + req->wLength = SWAPBYTE (psetup + 6U); + + pudev->dev.ctl_len = req->wLength; +} + +/*! + \brief handle USB low level error event + \param[in] pudev: pointer to USB device instance + \param[in] req: pointer to USB device request + \param[out] none + \retval none +*/ +void usbd_enum_error(usb_core_handle_struct *pudev, usb_device_req_struct *req) +{ + usbd_ep_stall(pudev, 0x80U); + usbd_ep_stall(pudev, 0x00U); + usb_ep0_startout(pudev); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_core.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_core.c new file mode 100644 index 0000000000000000000000000000000000000000..de41f722739b9c50b3e0185b5efb90cd4aca09e9 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_core.c @@ -0,0 +1,737 @@ +/*! + \file usbh_core.c + \brief this file implements the functions for the core state machine process + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbh_hcs.h" +#include "usbh_core.h" +#include "usbh_int.h" +#include "stdio.h" +#include "usbh_std.h" +#include "usbh_ctrl.h" +#include "usb_core.h" + +extern class_polling_fun_cb_struct class_polling_cb; + +uint8_t usbh_sof (usb_core_handle_struct *pudev); +uint8_t usbh_connected (usb_core_handle_struct *pudev); +uint8_t usbh_disconnected (usb_core_handle_struct *pudev); + +usbh_hcd_int_cb_struct usbh_hcd_int_cb = +{ + usbh_sof, + usbh_connected, + usbh_disconnected, +}; + +usbh_hcd_int_cb_struct *usbh_hcd_int_fops = &usbh_hcd_int_cb; +extern usbh_state_handle_struct usbh_state_core; + +static void host_idle_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_dev_attached_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_dev_detached_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_detect_dev_speed_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_enum_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_class_request_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_class_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_user_input_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_suspended_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void host_error_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); + +static usbh_status_enum class_req_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate); +static usbh_status_enum class_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate); + +/* the host state handle function array */ +void (*host_state_handle[]) (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate) = +{ + host_idle_handle, + host_dev_attached_handle, + host_dev_detached_handle, + host_detect_dev_speed_handle, + host_enum_handle, + host_class_request_handle, + host_class_handle, + host_user_input_handle, + host_suspended_handle, + host_error_handle, +}; + +/* the host state handle table */ +state_table_struct host_handle_table[HOST_HANDLE_TABLE_SIZE] = +{ + /* the current state the current event the next state the event function */ + {HOST_IDLE, HOST_EVENT_ATTACHED, HOST_DEV_ATTACHED, only_state_move }, + {HOST_DEV_ATTACHED, HOST_EVENT_ENUM, HOST_ENUMERATION, only_state_move }, + {HOST_ENUMERATION, HOST_EVENT_USER_INPUT, HOST_USER_INPUT, only_state_move }, + {HOST_USER_INPUT, HOST_EVENT_CLASS_REQ, HOST_CLASS_REQUEST, only_state_move }, + {HOST_CLASS_REQUEST, HOST_EVENT_CLASS, HOST_CLASS, only_state_move }, + {HOST_CLASS, HOST_EVENT_ERROR, HOST_ERROR, only_state_move }, + {HOST_ERROR, HOST_EVENT_IDLE, HOST_IDLE, only_state_move }, + {HOST_DEV_DETACHED, HOST_EVENT_IDLE, HOST_IDLE, only_state_move }, + {HOST_CLASS_REQUEST, HOST_EVENT_ERROR, HOST_ERROR, only_state_move }, +}; + +/*! + \brief the polling function of host state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +usbh_status_enum host_state_polling_fun (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + void *pustate) +{ + usbh_state_handle_struct *p_state = (usbh_state_handle_struct *)pustate; + + scd_begin(p_state, HOST_FSM_ID); + + if (-1 == p_state->usbh_current_state_stack_top) { + uint8_t cur_state = p_state->usbh_current_state; + + if ((0U == hcd_is_device_connected(pudev)) && (HOST_IDLE != cur_state)) { + if (HOST_DEV_DETACHED != cur_state) { + p_state->usbh_current_state = HOST_DEV_DETACHED; + cur_state = HOST_DEV_DETACHED; + } + } + + host_state_handle[cur_state](pudev, puhost, p_state); + } else { + uint8_t stack0_state = p_state->stack[0].state; + + if ((0U == hcd_is_device_connected(pudev)) && (HOST_IDLE != stack0_state)) { + if (HOST_DEV_DETACHED != stack0_state) { + p_state->stack[0].state = HOST_DEV_DETACHED; + stack0_state = HOST_DEV_DETACHED; + p_state->usbh_current_state = HOST_DEV_DETACHED; + } + } + + host_state_handle[stack0_state](pudev, puhost, p_state); + } + + return USBH_OK; +} + +/*! + \brief the handle function of HOST_IDLE state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_idle_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + if (hcd_is_device_connected(pudev)) { + scd_event_handle(pudev, puhost, pustate, HOST_EVENT_ATTACHED, pustate->usbh_current_state); + + if ((void *)0 != pudev->mdelay) { + pudev->mdelay(100U); + } + } +} + +/*! + \brief the handle function of HOST_DEV_ATTACHED state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_dev_attached_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usr_cb->device_connected(); + puhost->control.hc_out_num = usbh_channel_alloc(pudev, 0x00U); + puhost->control.hc_in_num = usbh_channel_alloc(pudev, 0x80U); + + /* reset usb device */ + if (0U == usb_port_reset(pudev)) { + puhost->usr_cb->device_reset(); + + /* wait for USB USBH_ISR_PrtEnDisableChange() + * host is now ready to start the enumeration + */ + puhost->device.speed = (uint8_t)USB_CURRENT_SPEED_GET(); + puhost->usr_cb->device_speed_detected(puhost->device.speed); + + /* open in control pipes */ + usbh_channel_open (pudev, + puhost->control.hc_in_num, + puhost->device.address, + puhost->device.speed, + USB_EPTYPE_CTRL, + (uint16_t)puhost->control.ep0_size); + + /* open out control pipes */ + usbh_channel_open (pudev, + puhost->control.hc_out_num, + puhost->device.address, + puhost->device.speed, + USB_EPTYPE_CTRL, + (uint16_t)puhost->control.ep0_size); + + scd_event_handle(pudev, puhost, pustate, HOST_EVENT_ENUM, pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of HOST_ENUMERATION state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_enum_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + if (USBH_OK == enum_state_polling_fun(pudev, puhost, pustate)) { + puhost->usr_cb->enumeration_finish(); + scd_event_handle(pudev, + puhost, + pustate, + HOST_EVENT_USER_INPUT, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of HOST_USER_INPUT state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_user_input_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + if (USBH_USER_RESP_OK == puhost->usr_cb->user_input()) { + if (USBH_OK == (puhost->class_init(pudev, puhost))) { + scd_event_handle(pudev, + puhost, + pustate, + HOST_EVENT_CLASS_REQ, + pustate->usbh_current_state); + } + } +} + +/*! + \brief the handle function of HOST_CLASS_REQUEST state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_class_request_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + if (USBH_OK == class_req_state_polling_fun(pudev, puhost, pustate)) { + scd_event_handle(pudev, puhost, pustate, HOST_EVENT_CLASS, pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of HOST_CLASS state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_class_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + class_state_polling_fun(pudev, puhost, pustate); +} + +/*! + \brief the handle function of HOST_SUSPENDED state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_suspended_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + /* no operation */ +} + +/*! + \brief the handle function of HOST_ERROR state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_error_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + /* re-initilaize host for new enumeration */ + usbh_deinit (pudev, puhost,&usbh_state_core); + puhost->usr_cb->deinit(); + puhost->class_deinit(pudev, &puhost->device); + scd_event_handle(pudev, puhost, pustate, HOST_EVENT_IDLE, pustate->usbh_current_state); +} + +/*! + \brief the handle function of HOST_DEV_DETACHED state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_dev_detached_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + /* manage user disconnect operations*/ + puhost->usr_cb->device_disconnected(); + + /* re-initilaize host for new enumeration */ + usbh_deinit(pudev, puhost,&usbh_state_core); + puhost->usr_cb->deinit(); + puhost->class_deinit(pudev, &puhost->device); + usbh_allchannel_dealloc(pudev); + scd_event_handle(pudev, puhost, pustate, HOST_EVENT_IDLE, pustate->usbh_current_state); +} + +/*! + \brief the handle function of HOST_DETECT_DEV_SPEED state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void host_detect_dev_speed_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + /* no operation */ +} + +/*! + \brief usb connect callback function from the interrupt. + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +uint8_t usbh_connected (usb_core_handle_struct *pudev) +{ + pudev->host.connect_status = 1U; + + return 0U; +} + +/*! + \brief usb disconnect callback function from the interrupt. + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +uint8_t usbh_disconnected (usb_core_handle_struct *pudev) +{ + pudev->host.connect_status = 0U; + + return 0U; +} + +/*! + \brief usb sof callback function from the interrupt. + \param[in] pudev: pointer to usb device + \param[out] none + \retval operation status +*/ +uint8_t usbh_sof (usb_core_handle_struct *pudev) +{ + /* this callback could be used to implement a scheduler process */ + return 0U; +} + +/*! + \brief initialize the host portion of the driver. + \param[in] pudev: pointer to usb device + \param[in] core_id: usb otg core identifier(high-speed or full-speed) + \param[out] none + \retval operation status +*/ +uint32_t hcd_init(usb_core_handle_struct *pudev, usb_core_id_enum core_id) +{ + pudev->host.connect_status = 0U; + + pudev->host.host_channel[0].endp_mps = 8U; + + usb_core_select(pudev, core_id); + +#ifndef DUAL_ROLE_MODE_ENABLED + + USB_GLOBAL_INT_DISABLE(); + + usb_core_init(pudev); + + /* force host mode*/ + usb_mode_set(pudev, HOST_MODE); + + usb_hostcore_init(pudev); + + USB_GLOBAL_INT_ENABLE(); + +#endif + + return 0U; +} + +/*! + \brief check if the device is connected. + \param[in] pudev: pointer to usb device + \param[out] none + \retval device connection status. 1 -> connected and 0 -> disconnected +*/ +uint32_t hcd_is_device_connected(usb_core_handle_struct *pudev) +{ + return (uint32_t)(pudev->host.connect_status); +} + +/*! + \brief this function returns the last URBstate + \param[in] pudev: pointer to usb device + \param[in] channel_num: host channel number which is in (0..7) + \param[out] none + \retval urb_state_enum +*/ +urb_state_enum hcd_urb_state_get (usb_core_handle_struct *pudev, uint8_t channel_num) +{ + return pudev->host.host_channel[channel_num].urb_state; +} + +/*! + \brief this function returns the last URBstate + \param[in] pudev: pointer to usb device + \param[in] channel_num: host channel number which is in (0..7) + \param[out] none + \retval No. of data bytes transferred +*/ +uint32_t hcd_xfer_count_get (usb_core_handle_struct *pudev, uint8_t channel_num) +{ + return pudev->host.host_channel[channel_num].xfer_count; +} + +/*! + \brief de-initialize host + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[out] none + \retval host status +*/ +usbh_status_enum usbh_deinit(usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct* pustate) +{ + /* software init */ + + puhost->control.ep0_size = USB_MAX_EP0_SIZE; + + puhost->device.address = USBH_DEVICE_ADDRESS_DEFAULT; + puhost->device.speed = HPRT_PRTSPD_FULL_SPEED; + + usbh_channel_free(pudev, puhost->control.hc_in_num); + usbh_channel_free(pudev, puhost->control.hc_out_num); + + scd_init(pustate); + scd_table_regist(pustate, host_handle_table, HOST_FSM_ID, HOST_HANDLE_TABLE_SIZE); + scd_table_regist(pustate, enum_handle_table, ENUM_FSM_ID, ENUM_HANDLE_TABLE_SIZE); + scd_table_regist(pustate, ctrl_handle_table, CTRL_FSM_ID, CTRL_HANDLE_TABLE_SIZE); + + scd_begin(pustate,HOST_FSM_ID); + scd_state_move(pustate, HOST_IDLE); + + return USBH_OK; +} + +/*! + \brief state core driver init + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +void scd_init(usbh_state_handle_struct* pustate) +{ + /* init the state core */ + pustate->usbh_current_state = 0U; + pustate->usbh_current_state_table = NULL; + pustate->usbh_current_state_table_size = 0U; + + pustate->usbh_current_state_stack_top = -1; + pustate->stack->state = 0U; + pustate->stack->table_size = 0U; + pustate->stack->table = NULL; + + pustate->usbh_regist_state_table_num = 0U; + pustate->usbh_regist_state_table->table = NULL; + pustate->usbh_regist_state_table->table_size = 0U; + pustate->usbh_regist_state_table->id = 0U; + + /* init the control and the enumeration polling handle flag */ + ctrl_polling_handle_flag = 0U; + enum_polling_handle_flag = 0U; +} + +/*! + \brief state core driver table regist + \param[in] pustate: pointer to usb state driver + \param[in] pstate_table: pointer to the table to regist + \param[in] table_id: the id of the table to regist + \param[in] current_table_size: the size of the current table to regist + \param[out] none + \retval none +*/ +void scd_table_regist (usbh_state_handle_struct* pustate, + state_table_struct* pstate_table, + uint8_t table_id, + uint8_t current_table_size) +{ + usbh_state_regist_table_struct *cur_state_reg_table; + + cur_state_reg_table = &pustate->usbh_regist_state_table[pustate->usbh_regist_state_table_num]; + + cur_state_reg_table->id = table_id; + cur_state_reg_table->table = pstate_table; + cur_state_reg_table->table_size = current_table_size; + + pustate->usbh_regist_state_table_num++; +} + +/*! + \brief state core driver begin + \param[in] pustate: pointer to usb state driver + \param[in] table_id: the id of the table to begin + \param[out] none + \retval none +*/ +void scd_begin(usbh_state_handle_struct* pustate, uint8_t table_id) +{ + uint8_t i = 0U, table_num = pustate->usbh_regist_state_table_num; + usbh_state_regist_table_struct *cur_state_reg_table; + + for (i = 0U; i < table_num; i++) { + cur_state_reg_table = &pustate->usbh_regist_state_table[i]; + + if (table_id == cur_state_reg_table->id) { + pustate->usbh_current_state_table = cur_state_reg_table->table; + pustate->usbh_current_state_table_size = cur_state_reg_table->table_size; + break; + } + } +} + +/*! + \brief state core driver move state + \param[in] pustate: pointer to usb state driver + \param[in] state: the state to move + \param[out] none + \retval none +*/ +void scd_state_move(usbh_state_handle_struct* pustate, uint8_t state) +{ + pustate->usbh_current_state = state; +} + +/*! + \brief state core driver event handle + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[in] event: the current event + \param[in] state: the current state + \param[out] none + \retval host status +*/ +usbh_status_enum scd_event_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct* pustate, + uint8_t event, + uint8_t state) +{ + uint8_t i = 0U; + ACT_FUN event_act_fun = NULL; + state_table_struct *backup_state_t = pustate->usbh_current_state_table; + state_table_struct *executive_state_table = pustate->usbh_current_state_table; + + /* look up the table to find the action function */ + for (i = 0U; i < pustate->usbh_current_state_table_size; i++) { + if (state == executive_state_table->cur_state) { + if (event == executive_state_table->cur_event) { + state = executive_state_table->next_state; + event_act_fun = executive_state_table->event_action_fun; + break; + } else { + executive_state_table++; + } + } else { + executive_state_table++; + } + } + + pustate->usbh_current_state_table = backup_state_t; + + /* if the action function is not NULL, execute the action function */ + if (event_act_fun) { + if (event_act_fun == &only_state_move) { + pustate->usbh_current_state = state; + } else { + return event_act_fun(pudev, puhost, pustate); + } + } + + return USBH_BUSY; +} + +/*! + \brief state core driver table push + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +void scd_table_push(usbh_state_handle_struct* pustate) +{ + usbh_state_stack_struct *top_state_element; + + if (pustate->usbh_current_state_stack_top < MAX_USBH_STATE_STACK_DEEP) { + pustate->usbh_current_state_stack_top++; + + top_state_element = &pustate->stack[pustate->usbh_current_state_stack_top]; + + /* put the current state table into the state stack */ + top_state_element->state = pustate->usbh_current_state; + top_state_element->table = pustate->usbh_current_state_table; + top_state_element->table_size = pustate->usbh_current_state_table_size; + } +} + +/*! + \brief state core driver table pop + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +void scd_table_pop (usbh_state_handle_struct* pustate) +{ + usbh_state_stack_struct *top_state_element; + + top_state_element = &pustate->stack[pustate->usbh_current_state_stack_top]; + + if (pustate->usbh_current_state_stack_top > -1) { + /* get the current state table from the state stack */ + pustate->usbh_current_state = top_state_element->state; + pustate->usbh_current_state_table = top_state_element->table; + pustate->usbh_current_state_table_size = top_state_element->table_size; + pustate->usbh_current_state_stack_top--; + } +} +/*! + \brief the polling function of class req state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval host status +*/ +static usbh_status_enum class_req_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate) +{ + return class_polling_cb.class_req_polling(pudev, puhost, pustate); +} + +/*! + \brief the polling function of class state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval host status +*/ +static usbh_status_enum class_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate) +{ + return class_polling_cb.class_polling(pudev, puhost, pustate); +} + +/*! + \brief the function is only used to state move + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +usbh_status_enum only_state_move (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate) +{ + return USBH_OK; +} + +/*! + \brief the function to the up state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +usbh_status_enum goto_up_state_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate) +{ + scd_table_pop((usbh_state_handle_struct *)pustate); + + return USBH_OK; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_ctrl.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_ctrl.c new file mode 100644 index 0000000000000000000000000000000000000000..3f5277701f1d36f60bc09366f32b71c489a66c3c --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_ctrl.c @@ -0,0 +1,639 @@ +/*! + \file usbh_ctrl.c + \brief this file implements the functions for the control transmit process + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbh_core.h" +#include "usbh_std.h" +#include "usbh_ctrl.h" + +uint8_t ctrl_polling_handle_flag = 0U; +uint8_t ctrl_setup_wait_flag = 0U; +uint8_t ctrl_data_wait_flag = 0U; +uint8_t ctrl_status_wait_flag = 0U; + +static uint16_t timeout = 0U; + +static void ctrl_idle_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void ctrl_setup_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void ctrl_data_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void ctrl_status_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void ctrl_error_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void ctrl_stalled_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void ctrl_complete_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); + +/* the ctrl state handle function array */ +void (*ctrl_state_handle[]) (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) = +{ + ctrl_idle_handle, + ctrl_setup_handle, + ctrl_data_handle, + ctrl_status_handle, + ctrl_error_handle, + ctrl_stalled_handle, + ctrl_complete_handle, +}; + +/* the ctrl state handle table */ +state_table_struct ctrl_handle_table[CTRL_HANDLE_TABLE_SIZE] = +{ + /* the current state the current event the next state the event function */ + {CTRL_IDLE, CTRL_EVENT_SETUP, CTRL_SETUP, only_state_move }, + {CTRL_SETUP, CTRL_EVENT_DATA, CTRL_DATA, only_state_move }, + {CTRL_SETUP, CTRL_EVENT_STATUS, CTRL_STATUS, only_state_move }, + {CTRL_SETUP, CTRL_EVENT_ERROR, CTRL_ERROR, only_state_move }, + {CTRL_DATA, CTRL_EVENT_STATUS, CTRL_STATUS, only_state_move }, + {CTRL_DATA, CTRL_EVENT_ERROR, CTRL_ERROR, only_state_move }, + {CTRL_DATA, CTRL_EVENT_STALLED, CTRL_STALLED, only_state_move }, + {CTRL_STATUS, CTRL_EVENT_COMPLETE, CTRL_COMPLETE, only_state_move }, + {CTRL_STATUS, CTRL_EVENT_ERROR, CTRL_ERROR, only_state_move }, + {CTRL_STATUS, CTRL_EVENT_STALLED, CTRL_STALLED, only_state_move }, + {CTRL_ERROR, GO_TO_UP_STATE_EVENT, UP_STATE, goto_up_state_fun }, + {CTRL_STALLED, GO_TO_UP_STATE_EVENT, UP_STATE, goto_up_state_fun }, + {CTRL_COMPLETE, GO_TO_UP_STATE_EVENT, UP_STATE, goto_up_state_fun }, +}; + +/*! + \brief the polling function of CTRL state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +usbh_status_enum ctrl_state_polling_fun (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + void *pustate) +{ + usbh_status_enum exe_state = USBH_BUSY; + usbh_state_handle_struct *p_state; + + p_state = (usbh_state_handle_struct *)pustate; + + /* if first enter this function, begin the ctrl state */ + if (0U == ctrl_polling_handle_flag) { + ctrl_polling_handle_flag = 1U; + scd_table_push(p_state); + scd_state_move(p_state, CTRL_IDLE); + } + + /* base on the current state to handle the ctrl state */ + scd_begin(p_state, CTRL_FSM_ID); + ctrl_state_handle[p_state->usbh_current_state](pudev, puhost, p_state); + + /* determine the control transfer whether to complete */ + switch (puhost->usbh_backup_state.ctrl_backup_state) { + case CTRL_COMPLETE: + ctrl_polling_handle_flag = 0U; + puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE; + exe_state = USBH_OK; + break; + case CTRL_STALLED: + ctrl_polling_handle_flag = 0U; + puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE; + exe_state = USBH_NOT_SUPPORTED; + break; + case CTRL_ERROR: + ctrl_polling_handle_flag = 0U; + puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE; + exe_state = USBH_FAIL; + break; + default: + exe_state = USBH_BUSY; + break; + } + + return exe_state; +} + +/*! + \brief the handle function of CTRL_IDLE state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void ctrl_idle_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE; + scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_SETUP, pustate->usbh_current_state); +} + +/*! + \brief the handle function of CTRL_SETUP state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void ctrl_setup_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + urb_state_enum urb_status = URB_IDLE; + puhost->usbh_backup_state.ctrl_backup_state = CTRL_SETUP; + + if (0U == ctrl_setup_wait_flag) { + ctrl_setup_wait_flag = 1U; + + /* send a setup packet */ + usbh_ctltx_setup (pudev, + puhost->control.setup.data, + puhost->control.hc_out_num); + } else { + urb_status = hcd_urb_state_get(pudev, puhost->control.hc_out_num); + + /* case setup packet sent successfully */ + if (URB_DONE == urb_status) { + /* check if there is a data stage */ + if (0U != puhost->control.setup.b.wLength) { + ctrl_setup_wait_flag = 0U; + timeout = DATA_STAGE_TIMEOUT; + scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_DATA, pustate->usbh_current_state); + /* no data stage */ + } else { + timeout = NODATA_STAGE_TIMEOUT; + ctrl_setup_wait_flag = 0U; + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_STATUS, + pustate->usbh_current_state); + } + + /* set the delay timer to enable timeout for data stage completion */ + puhost->control.timer = (uint16_t)USB_CURRENT_FRAME_GET(); + } else if (URB_ERROR == urb_status) { + ctrl_setup_wait_flag = 0U; + scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_ERROR, pustate->usbh_current_state); + } else { + /* no operation */ + } + } +} + +/*! + \brief the handle function of CTRL_DATA state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void ctrl_data_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + uint8_t direction; + urb_state_enum urb_status = URB_IDLE; + puhost->usbh_backup_state.ctrl_backup_state = CTRL_DATA; + + direction = (puhost->control.setup.b.bmRequestType & USB_DIR_MASK); + + if (USB_DIR_IN == direction) { + if (0U == ctrl_data_wait_flag) { + ctrl_data_wait_flag = 1U; + + /* issue an IN token */ + usbh_xfer(pudev, + puhost->control.buff, + puhost->control.hc_in_num, + puhost->control.length); + } else { + urb_status = hcd_urb_state_get(pudev, puhost->control.hc_in_num); + + /* check is data packet transfered successfully */ + switch (urb_status) { + case URB_DONE: + ctrl_data_wait_flag = 0U; + + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_STATUS, + pustate->usbh_current_state); + break; + case URB_STALL: + ctrl_data_wait_flag = 0U; + + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_STALLED, + pustate->usbh_current_state); + break; + case URB_ERROR: + ctrl_data_wait_flag = 0U; + + /* device error */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_ERROR, + pustate->usbh_current_state); + break; + default: + if (((uint16_t)USB_CURRENT_FRAME_GET() - puhost->control.timer) > timeout) { + ctrl_data_wait_flag = 0U; + + /* timeout for in transfer */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_ERROR, + pustate->usbh_current_state); + } + break; + } + } + } else { + if (0U == ctrl_data_wait_flag) { + ctrl_data_wait_flag = 1U; + + /* start data out transfer (only one data packet)*/ + pudev->host.host_channel[puhost->control.hc_out_num].data_tg_out = 1U; + + usbh_xfer(pudev, + puhost->control.buff, + puhost->control.hc_out_num, + puhost->control.length); + } else { + urb_status = hcd_urb_state_get(pudev, puhost->control.hc_out_num); + + switch (urb_status) { + case URB_DONE: + ctrl_data_wait_flag = 0U; + + /* if the setup pkt is sent successful, then change the state */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_STATUS, + pustate->usbh_current_state); + break; + case URB_STALL: + ctrl_data_wait_flag = 0U; + + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_STALLED, + pustate->usbh_current_state); + break; + case URB_NOTREADY: + /* nack received from device */ + ctrl_data_wait_flag = 0U; + break; + case URB_ERROR: + ctrl_data_wait_flag = 0U; + + /* device error */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_ERROR, + pustate->usbh_current_state); + break; + default: + break; + } + } + } +} + +/*! + \brief the handle function of CTRL_STATUS state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void ctrl_status_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + uint8_t direction; + urb_state_enum urb_status = URB_IDLE; + + puhost->usbh_backup_state.ctrl_backup_state = CTRL_STATUS; + + /* get the transfer direction in the data state, but the transfer direction in the status state is opposite */ + direction = (puhost->control.setup.b.bmRequestType & USB_DIR_MASK); + + if (USB_DIR_OUT == direction) { + /* handle status in */ + if (0U == ctrl_status_wait_flag) { + ctrl_status_wait_flag = 1U; + usbh_xfer (pudev, 0U, puhost->control.hc_in_num, 0U); + } else { + urb_status = hcd_urb_state_get(pudev, puhost->control.hc_in_num); + + switch (urb_status) { + case URB_DONE: + ctrl_status_wait_flag = 0U; + + /* handle URB_DONE status */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_COMPLETE, + pustate->usbh_current_state); + break; + case URB_ERROR: + ctrl_status_wait_flag = 0U; + + /* handle URB_STALL status*/ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_ERROR, + pustate->usbh_current_state); + break; + case URB_STALL: + ctrl_status_wait_flag = 0U; + + /* handle URB_STALL status */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_STALLED, + pustate->usbh_current_state); + break; + default: + if (((uint16_t)USB_CURRENT_FRAME_GET() - puhost->control.timer) > timeout) { + ctrl_status_wait_flag = 0U; + + /* handle timeout */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_ERROR, + pustate->usbh_current_state); + } + break; + } + } + } else { + /* handle status out */ + if (0U == ctrl_status_wait_flag) { + ctrl_status_wait_flag = 1U; + pudev->host.host_channel[puhost->control.hc_out_num].data_tg_out ^= 1U; + usbh_xfer (pudev, 0U, puhost->control.hc_out_num, 0U); + } else { + urb_status = hcd_urb_state_get(pudev, puhost->control.hc_out_num); + + switch (urb_status) { + case URB_DONE: + ctrl_status_wait_flag = 0U; + + /* handle URB_DONE status */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_COMPLETE, + pustate->usbh_current_state); + break; + case URB_NOTREADY: + /* handle URB_NOTREADY status */ + ctrl_status_wait_flag = 0U; + break; + case URB_ERROR: + ctrl_status_wait_flag = 0U; + + /* handle URB_ERROR status */ + scd_event_handle(pudev, + puhost, + pustate, + CTRL_EVENT_ERROR, + pustate->usbh_current_state); + break; + default: + break; + } + } + } +} + +/*! + \brief the handle function of CTRL_ERROR state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void ctrl_error_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.ctrl_backup_state = CTRL_ERROR; + + if (++puhost->control.error_count <= USBH_MAX_ERROR_COUNT) { + /* do the transmission again, starting from setup packet */ + scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_SETUP, pustate->usbh_current_state); + } else { + scd_event_handle(pudev, puhost, pustate, GO_TO_UP_STATE_EVENT, pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of CTRL_STALLED state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void ctrl_stalled_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.ctrl_backup_state = CTRL_STALLED; + scd_event_handle(pudev, puhost, pustate, GO_TO_UP_STATE_EVENT, pustate->usbh_current_state); +} + +/*! + \brief the handle function of CTRL_COMPLETE state + \param[in] pudev: pointer to usb device + \param[in] puhost: pointer to usb host + \param[in] pustate: pointer to usb state driver + \param[out] none + \retval none +*/ +static void ctrl_complete_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.ctrl_backup_state = CTRL_COMPLETE; + scd_event_handle(pudev, puhost, pustate, GO_TO_UP_STATE_EVENT, pustate->usbh_current_state); +} + +/*! + \brief send datas from the host channel + \param[in] pudev: pointer to usb device + \param[in] buf: data buffer address to send datas + \param[in] hc_num: the number of the host channel + \param[in] len: length of the send data + \param[out] none + \retval host operation status +*/ +usbh_status_enum usbh_xfer (usb_core_handle_struct *pudev, + uint8_t *buf, + uint8_t hc_num, + uint16_t len) +{ + usb_hostchannel_struct *puhc = &pudev->host.host_channel[hc_num]; + + puhc->xfer_buff = buf; + puhc->xfer_len = len; + + switch (puhc->endp_type) { + case USB_EPTYPE_CTRL: + if (0U == puhc->endp_in) { + if (0U == len) { + /* for status out stage, length = 0, status out pid = 1 */ + puhc->data_tg_out = 1U; + } + + /* set the data toggle bit as per the flag */ + if (0U == puhc->data_tg_out) { + /* put the pid 0 */ + puhc->DPID = HC_PID_DATA0; + } else { + /* put the pid 1 */ + puhc->DPID = HC_PID_DATA1; + } + } else { + puhc->DPID = HC_PID_DATA1; + } + break; + + case USB_EPTYPE_ISOC: + puhc->DPID = HC_PID_DATA0; + break; + + case USB_EPTYPE_BULK: + if (0U == puhc->endp_in) { + /* set the data toggle bit as per the flag */ + if (0U == puhc->data_tg_out) { + /* put the pid 0 */ + puhc->DPID = HC_PID_DATA0; + } else { + /* put the pid 1 */ + puhc->DPID = HC_PID_DATA1; + } + } else { + if (0U == puhc->data_tg_in) { + puhc->DPID = HC_PID_DATA0; + } else { + puhc->DPID = HC_PID_DATA1; + } + } + break; + + case USB_EPTYPE_INTR: + if (0U == puhc->endp_in) { + if (0U == puhc->data_tg_out) { + puhc->DPID = HC_PID_DATA0; + } else { + puhc->DPID = HC_PID_DATA1; + } + + /* toggle data pid */ + puhc->data_tg_out ^= 1U; + } else { + if (0U == puhc->data_tg_in) { + puhc->DPID = HC_PID_DATA0; + } else { + puhc->DPID = HC_PID_DATA1; + } + + /* toggle data pid */ + puhc->data_tg_in ^= 1U; + } + break; + + default: + break; + } + + hcd_submit_request (pudev, hc_num); + + return USBH_OK; +} + +/*! + \brief send the setup packet to the device + \param[in] pudev: pointer to usb device + \param[in] buf: buffer pointer from which the data will be send to device + \param[in] hc_num: host channel number + \param[out] none + \retval host operation status +*/ +usbh_status_enum usbh_ctltx_setup (usb_core_handle_struct *pudev, uint8_t *buf, uint8_t hc_num) +{ + usb_hostchannel_struct *puhc = &pudev->host.host_channel[hc_num]; + + puhc->DPID = HC_PID_SETUP; + puhc->xfer_buff = buf; + puhc->xfer_len = USBH_SETUP_PACKET_SIZE; + + return (usbh_status_enum)hcd_submit_request (pudev, hc_num); +} + +/*! + \brief this function prepare a hc and start a transfer + \param[in] pudev: pointer to usb device + \param[in] channel_num: host channel number which is in (0..7) + \param[out] none + \retval host operation status +*/ +uint32_t hcd_submit_request (usb_core_handle_struct *pudev, uint8_t channel_num) +{ + usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num]; + + puhc->urb_state = URB_IDLE; + puhc->xfer_count = 0U; + + return (uint32_t)usb_hostchannel_startxfer(pudev, channel_num); +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_hcs.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_hcs.c new file mode 100644 index 0000000000000000000000000000000000000000..33eecd62db1d3c8126363843f5abef7fae8187f0 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_hcs.c @@ -0,0 +1,185 @@ +/*! + \file usbh_hcs.c + \brief this file implements functions for opening and closing host channels + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbh_hcs.h" + +static uint16_t usbh_freechannel_get (usb_core_handle_struct *pudev); + +/*! + \brief open a channel + \param[in] pudev: pointer to usb device + \param[in] channel_num: host channel number which is in (0..7) + \param[in] dev_addr: USB device address allocated to attached device + \param[in] dev_speed: USB device speed (Full speed/Low speed) + \param[in] ep_type: endpoint type (bulk/int/ctl) + \param[in] ep_mps: max packet size + \param[out] none + \retval operation status +*/ +uint8_t usbh_channel_open (usb_core_handle_struct *pudev, + uint8_t channel_num, + uint8_t dev_addr, + uint8_t dev_speed, + uint8_t ep_type, + uint16_t ep_mps) +{ + usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num]; + uint16_t channel_info = puhc->info; + + puhc->endp_id = (uint8_t)channel_info & 0x7FU; + puhc->endp_in = (uint8_t)(channel_info & 0x80U) >> 7U; + puhc->endp_type = ep_type; + puhc->endp_mps = ep_mps; + puhc->dev_addr = dev_addr; + puhc->dev_speed = dev_speed; + + puhc->data_tg_in = 0U; + puhc->data_tg_out = 0U; + + usb_hostchannel_init(pudev, channel_num); + + return (uint8_t)HC_OK; +} + +/*! + \brief modify a channel + \param[in] pudev: pointer to usb device + \param[in] channel_num: host channel number which is in (0..7) + \param[in] dev_addr: USB Device address allocated to attached device + \param[in] dev_speed: USB device speed (full speed / low speed) + \param[in] ep_type: endpoint type (bulk/int/ctl) + \param[in] ep_mps: max packet size + \param[out] none + \retval operation status +*/ +uint8_t usbh_channel_modify (usb_core_handle_struct *pudev, + uint8_t channel_num, + uint8_t dev_addr, + uint8_t dev_speed, + uint8_t ep_type, + uint16_t ep_mps) +{ + usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num]; + + if (0U != dev_addr) { + puhc->dev_addr = dev_addr; + } + + if ((puhc->endp_mps != ep_mps) && (0U != ep_mps)) { + puhc->endp_mps = ep_mps; + } + + if ((puhc->dev_speed != dev_speed) && (0U != dev_speed)) { + puhc->dev_speed = dev_speed; + } + + usb_hostchannel_init(pudev, channel_num); + + return (uint8_t)HC_OK; +} + +/*! + \brief allocate a new channel for the pipe + \param[in] pudev: pointer to usb device + \param[in] ep_addr: endpoint for which the channel to be allocated + \param[out] none + \retval host channel number +*/ +uint8_t usbh_channel_alloc (usb_core_handle_struct *pudev, uint8_t ep_addr) +{ + uint16_t hc_num = usbh_freechannel_get(pudev); + + if ((uint16_t)HC_ERROR != hc_num) { + pudev->host.host_channel[hc_num].info = HC_USED | ep_addr; + } + + return (uint8_t)hc_num; +} + +/*! + \brief free the usb host channel + \param[in] pudev: pointer to usb device + \param[in] index: channel number to be freed which is in (0..7) + \param[out] none + \retval host operation status +*/ +uint8_t usbh_channel_free (usb_core_handle_struct *pudev, uint8_t index) +{ + if (index < HC_MAX) { + pudev->host.host_channel[index].info &= HC_USED_MASK; + } + + return USBH_OK; +} + +/*! + \brief free all usb host channel + \param[in] pudev: pointer to usb device + \param[out] none + \retval host operation status +*/ +uint8_t usbh_allchannel_dealloc (usb_core_handle_struct *pudev) +{ + uint8_t index; + + for (index = 2U; index < HC_MAX; index ++) { + pudev->host.host_channel[index].info = 0U; + } + + return USBH_OK; +} + +/*! + \brief get a free channel number for allocation to a device endpoint + \param[in] pudev: pointer to usb device + \param[out] none + \retval free channel number +*/ +static uint16_t usbh_freechannel_get (usb_core_handle_struct *pudev) +{ + uint8_t index = 0U; + + for (index = 0U; index < HC_MAX; index++) { + if (0U == (pudev->host.host_channel[index].info & HC_USED)) { + return (uint16_t)index; + } + } + + return HC_ERROR; +} + diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_int.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_int.c new file mode 100644 index 0000000000000000000000000000000000000000..5a652bcb88984a454027e47ef40d7387f5c08b5f --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_int.c @@ -0,0 +1,612 @@ +/*! + \file usbh_int.c + \brief USB host mode interrupt handler file + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usb_core.h" +#include "usb_defines.h" +#include "usbh_int.h" + +static uint32_t usbh_intf_sof (usb_core_handle_struct *pudev); +static uint32_t usbh_intf_port (usb_core_handle_struct *pudev); +static uint32_t usbh_intf_hc (usb_core_handle_struct *pudev); +static uint32_t usbh_intf_hc_in (usb_core_handle_struct *pudev, uint8_t channel_num); +static uint32_t usbh_intf_hc_out (usb_core_handle_struct *pudev, uint8_t channel_num); +static uint32_t usbh_intf_rxfifo_noempty (usb_core_handle_struct *pudev); +static uint32_t usbh_intf_nptxfifo_empty (usb_core_handle_struct *pudev); +static uint32_t usbh_intf_ptxfifo_empty (usb_core_handle_struct *pudev); +static uint32_t usbh_intf_disconnect (usb_core_handle_struct *pudev); +static uint32_t usbh_intf_iso_incomplete_xfer (usb_core_handle_struct *pudev); + +/*! + \brief handle global host interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +uint32_t usbh_isr (usb_core_handle_struct *pudev) +{ + uint32_t retval = 0U; + __IO uint32_t int_flag = 0U; + + /* check if host mode */ + if (USB_CURRENT_MODE_GET() == HOST_MODE) { + USB_CORE_INTR_READ(int_flag); + + if (!int_flag) { + return 0U; + } + + /* start of frame interrupt handle */ + if (int_flag & GINTF_SOF) { + retval |= usbh_intf_sof (pudev); + } + + /* rx fifo non-empty interrupt handle */ + if (int_flag & GINTF_RXFNEIF) { + retval |= usbh_intf_rxfifo_noempty (pudev); + } + + /* non-periodic tx fifo empty interrupt hanlde */ + if (int_flag & GINTF_NPTXFEIF) { + retval |= usbh_intf_nptxfifo_empty (pudev); + } + + /* periodic tx fifo empty interrupt handle */ + if (int_flag & GINTF_PTXFEIF) { + retval |= usbh_intf_ptxfifo_empty (pudev); + } + + /* host channels interrupt handle */ + if (int_flag & GINTF_HCIF) { + retval |= usbh_intf_hc (pudev); + } + + /* host port interrupt handle */ + if (int_flag & GINTF_HPIF) { + retval |= usbh_intf_port (pudev); + } + + /* disconnect interrupt handle */ + if (int_flag & GINTF_DISCIF) { + retval |= usbh_intf_disconnect (pudev); + } + + /* isochronous in transfer not complete interrupt handle */ + if (int_flag & GINTF_ISOONCIF) { + retval |= usbh_intf_iso_incomplete_xfer (pudev); + } + } + + return retval; +} + +/*! + \brief handle the start-of-frame interrupt in host mode + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_sof (usb_core_handle_struct *pudev) +{ + usbh_hcd_int_fops->sof(pudev); + + /* clear interrupt */ + USB_GINTF = GINTF_SOF; + + return 1U; +} + +/*! + \brief handle all host channels interrupt in host mode + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_hc (usb_core_handle_struct *pudev) +{ + uint8_t i = 0U; + uint32_t retval = 0U; + + for (i = 0U; i < pudev->cfg.host_channel_num; i++) { + if ((USB_HACHINT & HACHINT_HACHINT) & ((uint32_t)1U << i)) { + if ((USB_HCHxCTL((uint16_t)i) & HCHCTL_EPDIR) >> 15U) { + retval |= usbh_intf_hc_in (pudev, i); + } else { + retval |= usbh_intf_hc_out (pudev, i); + } + } + } + + return retval; +} + +/*! + \brief handle the disconnect interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_disconnect (usb_core_handle_struct *pudev) +{ + usbh_hcd_int_fops->device_disconnected(pudev); + + /* clear interrupt */ + USB_GINTF = GINTF_DISCIF; + + return 1U; +} + +/*! + \brief handle the non-periodic tx fifo empty interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_nptxfifo_empty (usb_core_handle_struct *pudev) +{ + uint8_t channel_num = 0U; + uint32_t dword_len = 0U, len = 0U; + usb_hostchannel_struct *puhc; + + channel_num = (uint8_t)((USB_HNPTFQSTAT & HNPTFQSTAT_CNUM) >> 27U); + puhc = &pudev->host.host_channel[channel_num]; + dword_len = (puhc->xfer_len + 3U) / 4U; + + while (((USB_HNPTFQSTAT & HNPTFQSTAT_NPTXFS) > dword_len) && (0U != puhc->xfer_len)) { + len = (USB_HNPTFQSTAT & HNPTFQSTAT_NPTXFS) * 4U; + + if (len > puhc->xfer_len) { + /* last packet */ + len = (uint16_t)puhc->xfer_len; + + USB_GINTEN &= ~GINTF_NPTXFEIF; + + } + + dword_len = (puhc->xfer_len + 3U) / 4U; + usb_fifo_write (puhc->xfer_buff, channel_num, (uint16_t)len); + + puhc->xfer_buff += len; + puhc->xfer_len -= len; + puhc->xfer_count += len; + } + + return 1U; +} + +/*! + \brief handle the periodic tx fifo empty interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_ptxfifo_empty (usb_core_handle_struct *pudev) +{ + uint8_t channel_num = 0U; + uint32_t dword_len = 0U, len = 0U; + usb_hostchannel_struct *puhc; + + channel_num = (uint8_t)((USB_HPTFQSTAT & HPTFQSTAT_CNUM) >> 27U); + puhc = &pudev->host.host_channel[channel_num]; + dword_len = (puhc->xfer_len + 3U) / 4U; + + while (((USB_HPTFQSTAT & HPTFQSTAT_PTXFS) > dword_len) && (0U != puhc->xfer_len)) { + len = (USB_HPTFQSTAT & HPTFQSTAT_PTXFS) * 4U; + + if (len > puhc->xfer_len) { + len = puhc->xfer_len; + + /* last packet */ + USB_GINTEN &= ~GINTF_PTXFEIF; + } + + dword_len = (puhc->xfer_len + 3U) / 4U; + usb_fifo_write (puhc->xfer_buff, channel_num, (uint16_t)len); + + puhc->xfer_buff += len; + puhc->xfer_len -= len; + puhc->xfer_count += len; + } + + return 1U; +} + +/*! + \brief handle the host port interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_port (usb_core_handle_struct *pudev) +{ + uint8_t port_speed = 0U; + uint8_t port_reset = 0U; + uint32_t retval = 0U; + __IO uint32_t hostportdup = USB_HPCS; + + /* clear the interrupt bits in gintsts */ + hostportdup &= ~HPCS_PE; + hostportdup &= ~HPCS_PCD; + hostportdup &= ~HPCS_PEDC; + + /* port connect detected */ + if (USB_HPCS & HPCS_PCD) { + hostportdup |= HPCS_PCD; + usbh_hcd_int_fops->device_connected(pudev); + retval |= 1U; + } + + /* port enable changed */ + if (USB_HPCS & HPCS_PEDC) { + hostportdup |= HPCS_PEDC; + + if (USB_HPCS & HPCS_PE) { + port_speed = (uint8_t)((USB_HPCS & HPCS_PS) >> 17U); + + if (HPRT_PRTSPD_LOW_SPEED == port_speed) { + USB_HFT = 6000U; + + if (HCTLR_6_MHZ != (USB_HCTL & HCTL_CLKSEL)) { + if (USB_CORE_EMBEDDED_PHY == pudev->cfg.phy_interface) { + USB_FSLSCLOCK_INIT(HCTLR_6_MHZ); + } + port_reset = 1U; + } + } else if(HPRT_PRTSPD_FULL_SPEED == port_speed) { + USB_HFT = 48000U; + + if (HCTLR_48_MHZ != (USB_HCTL & HCTL_CLKSEL)) { + if (USB_CORE_EMBEDDED_PHY == pudev->cfg.phy_interface) { + USB_FSLSCLOCK_INIT(HCTLR_48_MHZ); + } + port_reset = 1U; + } + } else { + /* for high speed device and others */ + port_reset = 1U; + } + } + } + + if (port_reset) { + usb_port_reset(pudev); + } + + /* clear port interrupts */ + USB_HPCS = hostportdup; + + return retval; +} + +/*! + \brief handle the out channel interrupt + \param[in] pudev: pointer to usb device instance + \param[in] channel_num: host channel number which is in (0..7) + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_hc_out (usb_core_handle_struct *pudev, uint8_t channel_num) +{ + uint32_t channel_intr = USB_HCHxINTF((uint16_t)channel_num); + usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num]; + + channel_intr &= USB_HCHxINTEN((uint16_t)channel_num); + + if (channel_intr & HCHINTF_ACK) { + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_ACK; + } else if (channel_intr & HCHINTF_REQOVR) { + /* handle queue overrun interrupt */ + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_REQOVR; + } else if (channel_intr & HCHINTF_TF) { + /* handle transfer finished interrupt */ + puhc->err_count = 0U; + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_TF; + puhc->status = HC_XF; + } else if (channel_intr & HCHINTF_STALL) { + /* handle stall */ + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_STALL; + usb_hostchannel_halt(pudev, channel_num); + puhc->status = HC_STALL; + } else if (channel_intr & HCHINTF_NAK) { + /* handle NAK */ + puhc->err_count = 0U; + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK; + puhc->status = HC_NAK; + } else if (channel_intr & HCHINTF_USBER) { + /* handle USB bus error */ + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + puhc->status = HC_TRACERR; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_USBER; + } else if (channel_intr & HCHINTF_NYET) { + /* handle NYET */ + puhc->err_count = 0U; + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + puhc->status = HC_NYET; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NYET; + } else if (channel_intr & HCHINTF_DTER) { + /* handle data toggle error */ + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK; + puhc->status= HC_DTGERR; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_DTER; + } else if (channel_intr & HCHINTF_CH) { + /* handle channel halted */ + USB_HCHxINTEN((uint16_t)channel_num) &= ~HCHINTEN_CHIE; + + switch (puhc->status) { + case HC_XF: + puhc->urb_state = URB_DONE; + + if (USB_EPTYPE_BULK == ((USB_HCHxCTL((uint16_t)channel_num) & HCHCTL_EPTYPE) >> 18U)) { + puhc->data_tg_out ^= 1U; + } + break; + case HC_NAK: + puhc->urb_state = URB_NOTREADY; + break; + case HC_NYET: + puhc->urb_state = URB_NOTREADY; + break; + case HC_STALL: + puhc->urb_state = URB_STALL; + break; + case HC_TRACERR: + puhc->urb_state = URB_ERROR; + break; + default: + break; + } + + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_CH; + } else { + /* no operation */ + } + + return 1U; +} + +/*! + \brief handle the in channel interrupt + \param[in] pudev: pointer to usb device instance + \param[in] channel_num: host channel number which is in (0..7) + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_hc_in (usb_core_handle_struct *pudev, uint8_t channel_num) +{ + uint8_t endp_type = 0U; + usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num]; + + uint32_t channle_intf = USB_HCHxINTF((uint16_t)channel_num); + __IO uint32_t channel_ctrl = USB_HCHxCTL((uint16_t)channel_num); + + channle_intf &= USB_HCHxINTEN((uint16_t)channel_num); + + endp_type = (uint8_t)((channel_ctrl & HCHCTL_EPTYPE) >> 18U); + + if (channle_intf & HCHINTF_ACK) { + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_ACK; + } else if (channle_intf & HCHINTF_STALL) { + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + puhc->status = HC_STALL; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_STALL; + + /* NOTE: When there is a 'stall', reset also nak, + else, the pudev->host.status = HC_STALL + will be overwritten by 'nak' in code below */ + channle_intf &= ~HCHINTF_NAK; + + usb_hostchannel_halt(pudev, channel_num); + } else if (channle_intf & HCHINTF_DTER) { + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK; + puhc->status = HC_DTGERR; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_DTER; + } else { + /* no operation */ + } + /* handle queue overrun interrupt */ + if (channle_intf & HCHINTF_REQOVR) { + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_REQOVR; + } else if (channle_intf & HCHINTF_TF) { + /* handle transfer finished interrupt */ + puhc->status = HC_XF; + puhc->err_count = 0U; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_TF; + + if ((USB_EPTYPE_CTRL == endp_type) || (USB_EPTYPE_BULK == endp_type)) { + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK; + puhc->data_tg_in ^= 1U; + } else if (USB_EPTYPE_INTR == endp_type) { + channel_ctrl |= HCHCTL_ODDFRM; + USB_HCHxCTL((uint16_t)channel_num) = channel_ctrl; + puhc->urb_state = URB_DONE; + } else { + /* no operation */ + } + } else if (channle_intf & HCHINTF_CH) { + /* handle channel halted */ + USB_HCHxINTEN((uint16_t)channel_num) &= ~HCHINTEN_CHIE; + + switch (puhc->status) { + case HC_XF: + puhc->urb_state = URB_DONE; + break; + case HC_TRACERR: + case HC_DTGERR: + puhc->err_count = 0U; + puhc->urb_state = URB_ERROR; + break; + case HC_STALL: + puhc->urb_state = URB_STALL; + break; + default: + if (USB_EPTYPE_INTR == endp_type) { + puhc->data_tg_in ^= 1U; + } + break; + } + + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_CH; + } else if (channle_intf & HCHINTF_USBER) { + /* handle USB bus error */ + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + puhc->status = HC_TRACERR; + usb_hostchannel_halt(pudev, channel_num); + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_USBER; + } else if (channle_intf & HCHINTF_NAK) { + /* handle NAK */ + if (USB_EPTYPE_INTR == endp_type) { + USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE; + usb_hostchannel_halt(pudev, channel_num); + } + + puhc->status = HC_NAK; + USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK; + + if ((USB_EPTYPE_CTRL == endp_type) || (USB_EPTYPE_BULK == endp_type)) { + /* re-activate the channel */ + channel_ctrl |= HCHCTL_CEN; + channel_ctrl &= ~HCHCTL_CDIS; + USB_HCHxCTL((uint16_t)channel_num) = channel_ctrl; + } + } else { + /* no operation */ + } + + return 1U; +} + +/*! + \brief handle the rx fifo non-empty interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_rxfifo_noempty (usb_core_handle_struct *pudev) +{ + uint32_t count = 0U; + __IO uint8_t channel_num = 0U; + __IO uint32_t rx_status = 0U; + uint32_t usbh_ch_ctl_reg = 0U; + usb_hostchannel_struct *puhc; + + /* disable the rx status queue level interrupt */ + USB_GINTEN &= ~GINTF_RXFNEIF; + + rx_status = USB_GRSTATP; + channel_num = (uint8_t)(rx_status & GRSTATRP_CNUM); + puhc = &pudev->host.host_channel[channel_num]; + + switch ((rx_status & GRSTATRP_RPCKST) >> 17) { + case GRSTATR_RPCKST_IN: + count = (rx_status & GRSTATRP_BCOUNT) >> 4; + + /* read the data into the host buffer. */ + if ((count > 0U) && (puhc->xfer_buff != (void *)0)) { + usb_fifo_read(puhc->xfer_buff, (uint16_t)count); + + /* manage multiple Xfer */ + puhc->xfer_buff += count; + puhc->xfer_count += count; + + if (USB_HCHxLEN((uint16_t)channel_num) & HCHLEN_PCNT) { + /* re-activate the channel when more packets are expected */ + usbh_ch_ctl_reg = USB_HCHxCTL((uint16_t)channel_num); + usbh_ch_ctl_reg |= HCHCTL_CEN; + usbh_ch_ctl_reg &= ~HCHCTL_CDIS; + USB_HCHxCTL((uint16_t)channel_num) = usbh_ch_ctl_reg; + } + } + break; + case GRSTATR_RPCKST_IN_XFER_COMP: + break; + case GRSTATR_RPCKST_DATA_TOGGLE_ERR: + count = (rx_status & GRSTATRP_BCOUNT) >> 4; + while (count > 0) { + rx_status = USB_GRSTATP; + count--; + } + break; + case GRSTATR_RPCKST_CH_HALTED: + default: + break; + } + + /* enable the rx status queue level interrupt */ + USB_GINTEN |= GINTF_RXFNEIF; + + return 1U; +} + +/*! + \brief handle the incomplete periodic transfer interrupt + \param[in] pudev: pointer to usb device instance + \param[out] none + \retval operation status +*/ +static uint32_t usbh_intf_iso_incomplete_xfer (usb_core_handle_struct *pudev) +{ + __IO uint32_t gint_flag = 0U; + + gint_flag = USB_HCHxCTL(0U); + USB_HCHxCTL(0U) = 0U; + + gint_flag = 0U; + + /* clear interrupt */ + gint_flag |= GINTF_ISOONCIF; + USB_GINTF = gint_flag; + + return 1U; +} diff --git a/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_std.c b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_std.c new file mode 100644 index 0000000000000000000000000000000000000000..6052b906e4b8353ea1ab933a7da6dc9540894934 --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_std.c @@ -0,0 +1,834 @@ +/*! + \file usbh_std.c + \brief USB 2.0 standard function definition + + \version 2014-12-26, V1.0.0, firmware for GD32F10x + \version 2017-06-20, V2.0.0, firmware for GD32F10x + \version 2018-07-31, V2.1.0, firmware for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#include "usbh_core.h" +#include "usbh_usr.h" +#include "usbh_std.h" +#include "usbh_ctrl.h" + +uint8_t local_buffer[64U]; +uint8_t usbh_cfg_desc[512U]; +uint8_t enum_polling_handle_flag = 0U; + +static void enum_idle_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_get_full_dev_desc_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_set_addr_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_get_cfg_desc_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_get_full_cfg_desc_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_get_mfc_string_desc_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_get_product_string_desc_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_get_serialnum_string_desc_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_set_configuration_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); +static void enum_dev_configured_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate); + +/* the enumeration state handle function array */ +void (*enum_state_handle[]) (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate) = +{ + enum_idle_handle, + enum_set_addr_handle, + enum_get_full_dev_desc_handle, + enum_get_cfg_desc_handle, + enum_get_full_cfg_desc_handle, + enum_get_mfc_string_desc_handle, + enum_get_product_string_desc_handle, + enum_get_serialnum_string_desc_handle, + enum_set_configuration_handle, + enum_dev_configured_handle, +}; + +/* the enumeration state handle table */ +state_table_struct enum_handle_table[ENUM_HANDLE_TABLE_SIZE] = +{ + /* the current state the current event the next state the event function */ + {ENUM_IDLE, ENUM_EVENT_SET_ADDR, ENUM_SET_ADDR, only_state_move }, + {ENUM_SET_ADDR, ENUN_EVENT_GET_FULL_DEV_DESC, ENUM_GET_FULL_DEV_DESC, only_state_move }, + {ENUM_GET_FULL_DEV_DESC, ENUN_EVENT_GET_CFG_DESC, ENUM_GET_CFG_DESC, only_state_move }, + {ENUM_GET_CFG_DESC, ENUN_EVENT_GET_FULL_CFG_DESC, ENUM_GET_FULL_CFG_DESC, only_state_move }, + {ENUM_GET_FULL_CFG_DESC, ENUN_EVENT_GET_MFC_STRING_DESC, ENUM_GET_MFC_STRING_DESC, only_state_move }, + {ENUM_GET_MFC_STRING_DESC, ENUN_EVENT_GET_PRODUCT_STRING_DESC, ENUM_GET_PRODUCT_STRING_DESC, only_state_move }, + {ENUM_GET_PRODUCT_STRING_DESC, ENUN_EVENT_GET_SERIALNUM_STRING_DESC, ENUM_GET_SERIALNUM_STRING_DESC, only_state_move }, + {ENUM_GET_SERIALNUM_STRING_DESC, ENUN_EVENT_SET_CONFIGURATION, ENUM_SET_CONFIGURATION, only_state_move }, + {ENUM_SET_CONFIGURATION, ENUN_EVENT_DEV_CONFIGURED, ENUM_DEV_CONFIGURED, only_state_move }, + {ENUM_DEV_CONFIGURED, GO_TO_UP_STATE_EVENT, UP_STATE, goto_up_state_fun }, +}; + +/*! + \brief the polling function of enumeration state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval usb host status +*/ +usbh_status_enum enum_state_polling_fun (usb_core_handle_struct *pudev, usbh_host_struct *puhost, void *pustate) +{ + usbh_status_enum exe_state = USBH_BUSY; + usbh_state_handle_struct *p_state; + p_state = (usbh_state_handle_struct *)pustate; + + if (0U == enum_polling_handle_flag) { + enum_polling_handle_flag = 1U; + scd_table_push(p_state); + scd_state_move(p_state, ENUM_IDLE); + } + + /* start the enumeration state handle */ + scd_begin(p_state,ENUM_FSM_ID); + + if (0U == p_state->usbh_current_state_stack_top) { + enum_state_handle[p_state->usbh_current_state](pudev, puhost, p_state); + } else { + enum_state_handle[p_state->stack[1].state](pudev, puhost, p_state); + } + + /* determine the enumeration whether to complete */ + if (ENUM_DEV_CONFIGURED == puhost->usbh_backup_state.enum_backup_state) { + puhost->usbh_backup_state.enum_backup_state = ENUM_IDLE; + enum_polling_handle_flag = 0U; + exe_state = USBH_OK; + } + + return exe_state; +} + +/*! + \brief the handle function of ENUM_IDLE state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_idle_handle (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_IDLE; + + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_desc_get(pudev, + puhost, + pudev->host.rx_buffer, + USB_REQTYPE_DEVICE | USB_STANDARD_REQ, + USB_DEVDESC, + 8U); + if ((void *)0 != pudev->mdelay) { + pudev->mdelay(100U); + } + } + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)) { + usbh_device_desc_parse(&puhost->device.dev_desc, pudev->host.rx_buffer, 8U); + puhost->control.ep0_size = puhost->device.dev_desc.bMaxPacketSize0; + + /* issue reset */ + usb_port_reset(pudev); + + /* modify control channels configuration for maxpacket size */ + usbh_channel_modify (pudev, + puhost->control.hc_out_num, + 0U, + 0U, + 0U, + (uint16_t)puhost->control.ep0_size); + + usbh_channel_modify (pudev, + puhost->control.hc_in_num, + 0U, + 0U, + 0U, + (uint16_t)puhost->control.ep0_size); + + scd_event_handle(pudev, + puhost, + pustate, + ENUM_EVENT_SET_ADDR, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_GET_FULL_DEV_DESC state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_get_full_dev_desc_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_GET_FULL_DEV_DESC; + + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_desc_get(pudev, + puhost, + pudev->host.rx_buffer, + USB_REQTYPE_DEVICE | USB_STANDARD_REQ, + USB_DEVDESC, + USB_DEVDESC_SIZE); + } + + if(USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)){ + usbh_device_desc_parse(&puhost->device.dev_desc, pudev->host.rx_buffer, USB_DEVDESC_SIZE); + puhost->usr_cb->device_desc_available(&puhost->device.dev_desc); + + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_GET_CFG_DESC, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_SET_ADDR state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_set_addr_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_SET_ADDR; + + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_addr_set(pudev, puhost,USBH_DEVICE_ADDRESS); + if ((void *)0 != pudev->mdelay) { + pudev->mdelay(100U); + } + } + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)) { + if ((void *)0 != pudev->mdelay) { + pudev->mdelay(2U); + } + puhost->device.address = USBH_DEVICE_ADDRESS; + + /* user callback for device address assigned */ + puhost->usr_cb->device_address_set(); + + /* modify control channels to update device address */ + usbh_channel_modify (pudev, + puhost->control.hc_in_num, + puhost->device.address, + 0U, + 0U, + 0U); + + usbh_channel_modify (pudev, + puhost->control.hc_out_num, + puhost->device.address, + 0U, + 0U, + 0U); + + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_GET_FULL_DEV_DESC, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_GET_CFG_DESC state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_get_cfg_desc_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + uint16_t index = 0U; + + puhost->usbh_backup_state.enum_backup_state = ENUM_GET_CFG_DESC; + + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_desc_get(pudev, + puhost, + pudev->host.rx_buffer, + USB_REQTYPE_DEVICE | USB_STANDARD_REQ, + USB_CFGDESC, + USB_CFGDESC_SIZE); + } + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)) { + /* save configuration descriptor for class parsing usage */ + for (; index < USB_CFGDESC_SIZE; index ++) { + usbh_cfg_desc[index] = pudev->host.rx_buffer[index]; + } + + /* commands successfully sent and response received */ + usbh_cfg_desc_parse (&puhost->device.cfg_desc, + puhost->device.itf_desc, + puhost->device.ep_desc, + pudev->host.rx_buffer, + USB_CFGDESC_SIZE); + + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_GET_FULL_CFG_DESC, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_GET_FULL_CFG_DESC state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_get_full_cfg_desc_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + + uint16_t index = 0U; + + puhost->usbh_backup_state.enum_backup_state = ENUM_GET_FULL_CFG_DESC; + + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_desc_get (pudev, puhost, pudev->host.rx_buffer, + USB_REQTYPE_DEVICE | USB_STANDARD_REQ, + USB_CFGDESC, puhost->device.cfg_desc.wTotalLength); + } + + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)) { + /* save configuration descriptor for class parsing usage */ + for (; index < puhost->device.cfg_desc.wTotalLength; index ++) { + usbh_cfg_desc[index] = pudev->host.rx_buffer[index]; + } + + /* commands successfully sent and response received */ + usbh_cfg_desc_parse (&puhost->device.cfg_desc, + puhost->device.itf_desc, + puhost->device.ep_desc, + pudev->host.rx_buffer, + puhost->device.cfg_desc.wTotalLength); + + /* User callback for configuration descriptors available */ + puhost->usr_cb->configuration_desc_available(&puhost->device.cfg_desc, + puhost->device.itf_desc, + puhost->device.ep_desc[0]); + + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_GET_MFC_STRING_DESC, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_GET_MFC_STRING_DESC state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_get_mfc_string_desc_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_GET_MFC_STRING_DESC; + + if (0U != puhost->device.dev_desc.iManufacturer) { + if(CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_desc_get(pudev, + puhost, + pudev->host.rx_buffer, + USB_REQTYPE_DEVICE | USB_STANDARD_REQ, + USB_STRDESC | puhost->device.dev_desc.iManufacturer, + 0xffU); + } + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)) { + usbh_string_desc_parse(pudev->host.rx_buffer, local_buffer, 0xffU); + puhost->usr_cb->manufacturer_string(local_buffer); + + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_GET_PRODUCT_STRING_DESC, + pustate->usbh_current_state); + } + } else { + puhost->usr_cb->manufacturer_string("N/A"); + scd_state_move((usbh_state_handle_struct *)pustate, ENUM_GET_PRODUCT_STRING_DESC); + } +} + +/*! + \brief the handle function of ENUM_GET_PRODUCT_STRING_DESC state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_get_product_string_desc_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_GET_PRODUCT_STRING_DESC; + + if (0U != puhost->device.dev_desc.iProduct) { + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_desc_get(pudev, + puhost, + pudev->host.rx_buffer, + USB_REQTYPE_DEVICE | USB_STANDARD_REQ, + USB_STRDESC | puhost->device.dev_desc.iProduct, + 0xffU); + } + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)) { + usbh_string_desc_parse(pudev->host.rx_buffer, local_buffer, 0xffU); + + /* user callback for product string */ + puhost->usr_cb->product_string(local_buffer); + + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_GET_SERIALNUM_STRING_DESC, + pustate->usbh_current_state); + } + } else { + puhost->usr_cb->product_string("N/A"); + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_GET_SERIALNUM_STRING_DESC, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_GET_SERIALNUM_STRING_DESC state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_get_serialnum_string_desc_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_GET_SERIALNUM_STRING_DESC; + + if (0U != puhost->device.dev_desc.iSerialNumber) { + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state) { + usbh_enum_desc_get(pudev, + puhost, + pudev->host.rx_buffer, + USB_REQTYPE_DEVICE | USB_STANDARD_REQ, + USB_STRDESC | puhost->device.dev_desc.iSerialNumber, + 0xffU); + } + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)){ + usbh_string_desc_parse(pudev->host.rx_buffer, local_buffer, 0xffU); + + /* user callback for product string */ + puhost->usr_cb->serial_num_string(local_buffer); + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_SET_CONFIGURATION, + pustate->usbh_current_state); + } + } else { + puhost->usr_cb->serial_num_string("N/A"); + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_SET_CONFIGURATION, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_SET_CONFIGURATION state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_set_configuration_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_SET_CONFIGURATION; + + if (CTRL_IDLE == puhost->usbh_backup_state.ctrl_backup_state ) { + usbh_enum_cfg_set(pudev, puhost, (uint16_t)puhost->device.cfg_desc.bConfigurationValue); + } + + if (USBH_OK == ctrl_state_polling_fun(pudev, puhost, pustate)) { + scd_event_handle(pudev, + puhost, + pustate, + ENUN_EVENT_DEV_CONFIGURED, + pustate->usbh_current_state); + } +} + +/*! + \brief the handle function of ENUM_DEV_CONFIGURED state + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] pustate: pointer to USB state driver + \param[out] none + \retval none +*/ +static void enum_dev_configured_handle (usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + usbh_state_handle_struct *pustate) +{ + puhost->usbh_backup_state.enum_backup_state = ENUM_DEV_CONFIGURED; + scd_event_handle(pudev, puhost, pustate, GO_TO_UP_STATE_EVENT, pustate->usbh_current_state); +} + +/*! + \brief get descriptor in usb host enumeration stage + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] buf: buffer to store the descriptor + \param[in] ReqType: descriptor type + \param[in] ValueIdx: wValue for the GetDescriptr request + \param[in] Len: length of the descriptor + \param[out] none + \retval none +*/ +void usbh_enum_desc_get(usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + uint8_t *buf, + uint8_t req_type, + uint16_t value_idx, + uint16_t len) +{ + usb_setup_union *pSetup = &(puhost->control.setup); + + pSetup->b.bmRequestType = USB_DIR_IN | req_type; + pSetup->b.bRequest = USBREQ_GET_DESCRIPTOR; + pSetup->b.wValue = value_idx; + + if (USB_STRDESC == (value_idx & 0xff00U)){ + pSetup->b.wIndex = 0x0409U; + } else { + pSetup->b.wIndex = 0U; + } + + pSetup->b.wLength = len; + + puhost->control.buff = buf; + puhost->control.length = len; + +} + +/*! + \brief set address in usb host enumeration stage + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] device_address: the device address + \param[out] none + \retval none +*/ +void usbh_enum_addr_set(usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + uint8_t device_address) +{ + usb_setup_union *p_setup = &(puhost->control.setup); + + p_setup->b.bmRequestType = USB_DIR_OUT | USB_REQTYPE_DEVICE | USB_STANDARD_REQ; + p_setup->b.bRequest = USBREQ_SET_ADDRESS; + p_setup->b.wValue = (uint16_t)device_address; + p_setup->b.wIndex = 0U; + p_setup->b.wLength = 0U; + puhost->control.buff = 0U; + puhost->control.length = 0U; +} + +/*! + \brief set configuration in usb host enumeration stage + \param[in] pudev: pointer to USB device + \param[in] puhost: pointer to USB host + \param[in] cfg_idx: the index of the configuration + \param[out] none + \retval none +*/ +void usbh_enum_cfg_set(usb_core_handle_struct *pudev, + usbh_host_struct *puhost, + uint16_t cfg_idx) +{ + usb_setup_union *p_setup = &(puhost->control.setup); + + p_setup->b.bmRequestType = USB_DIR_OUT | USB_REQTYPE_DEVICE | USB_STANDARD_REQ; + p_setup->b.bRequest = USBREQ_SET_CONFIGURATION; + p_setup->b.wValue = cfg_idx; + p_setup->b.wIndex = 0U; + p_setup->b.wLength = 0U; + puhost->control.buff = 0; + puhost->control.length = 0U; +} + +/*! + \brief parse the device descriptor + \param[in] dev_desc: device_descriptor destinaton address + \param[in] buf: buffer where the source descriptor is available + \param[in] len: length of the descriptor + \param[out] none + \retval none +*/ +void usbh_device_desc_parse (usb_descriptor_device_struct *dev_desc, uint8_t *buf, uint16_t len) +{ + dev_desc->Header.bLength = *(uint8_t *)(buf + 0U); + dev_desc->Header.bDescriptorType = *(uint8_t *)(buf + 1U); + dev_desc->bcdUSB = SWAPBYTE(buf + 2U); + dev_desc->bDeviceClass = *(uint8_t *)(buf + 4U); + dev_desc->bDeviceSubClass = *(uint8_t *)(buf + 5U); + dev_desc->bDeviceProtocol = *(uint8_t *)(buf + 6U); + dev_desc->bMaxPacketSize0 = *(uint8_t *)(buf + 7U); + + if (len > 8U){ + /* for 1st time after device connection, host may issue only 8 bytes for device descriptor length */ + dev_desc->idVendor = SWAPBYTE(buf + 8U); + dev_desc->idProduct = SWAPBYTE(buf + 10U); + dev_desc->bcdDevice = SWAPBYTE(buf + 12U); + dev_desc->iManufacturer = *(uint8_t *)(buf + 14U); + dev_desc->iProduct = *(uint8_t *)(buf + 15U); + dev_desc->iSerialNumber = *(uint8_t *)(buf + 16U); + dev_desc->bNumberConfigurations = *(uint8_t *)(buf + 17U); + } +} + +/*! + \brief parse the configuration descriptor + \param[in] cfg_desc: configuration descriptor address + \param[in] itf_desc: interface descriptor address + \param[in] ep_desc: endpoint descriptor address + \param[in] buf: buffer where the source descriptor is available + \param[in] len: length of the descriptor + \param[out] none + \retval none +*/ +void usbh_cfg_desc_parse (usb_descriptor_configuration_struct *cfg_desc, + usb_descriptor_interface_struct *itf_desc, + usb_descriptor_endpoint_struct ep_desc[][USBH_MAX_EP_NUM], + uint8_t *buf, + uint16_t len) +{ + usb_descriptor_interface_struct *pitf = NULL; + usb_descriptor_interface_struct temp_pitf; + usb_descriptor_endpoint_struct *pep = NULL; + usb_descriptor_header_struct *pdesc = (usb_descriptor_header_struct *)buf; + + uint8_t itf_ix = 0U; + uint8_t ep_ix = 0U; + uint16_t ptr = 0U; + static uint8_t prev_itf = 0U; + static uint16_t prev_ep_size = 0U; + + /* parse configuration descriptor */ + cfg_desc->Header.bLength = *(uint8_t *)(buf + 0U); + cfg_desc->Header.bDescriptorType = *(uint8_t *)(buf + 1U); + cfg_desc->wTotalLength = SWAPBYTE(buf + 2U); + cfg_desc->bNumInterfaces = *(uint8_t *)(buf + 4U); + cfg_desc->bConfigurationValue = *(uint8_t *)(buf + 5U); + cfg_desc->iConfiguration = *(uint8_t *)(buf + 6U); + cfg_desc->bmAttributes = *(uint8_t *)(buf + 7U); + cfg_desc->bMaxPower = *(uint8_t *)(buf + 8U); + + if (len > USB_CFGDESC_SIZE) { + ptr = USB_CFG_DESC_LEN; + + if (cfg_desc->bNumInterfaces <= USBH_MAX_INTERFACES_NUM) { + pitf = (usb_descriptor_interface_struct *)0U; + + for (; ptr < cfg_desc->wTotalLength; ) { + pdesc = usbh_next_desc_get((uint8_t *)pdesc, &ptr); + + if (USB_DESCTYPE_INTERFACE == pdesc->bDescriptorType) { + itf_ix = *((uint8_t *)pdesc + 2U); + pitf = &itf_desc[itf_ix]; + + if (*((uint8_t *)pdesc + 3U) < 3U) { + usbh_interface_desc_parse (&temp_pitf, (uint8_t *)pdesc); + + /* parse endpoint descriptors relative to the current interface */ + if (temp_pitf.bNumEndpoints <= USBH_MAX_EP_NUM) { + for (ep_ix = 0U; ep_ix < temp_pitf.bNumEndpoints;) { + pdesc = usbh_next_desc_get((void* )pdesc, &ptr); + + if (USB_DESCTYPE_ENDPOINT == pdesc->bDescriptorType) { + pep = &ep_desc[itf_ix][ep_ix]; + + if (prev_itf != itf_ix) { + prev_itf = itf_ix; + usbh_interface_desc_parse (pitf, (uint8_t *)&temp_pitf); + } else { + if (prev_ep_size > SWAPBYTE((uint8_t *)pdesc + 4)) { + break; + } else { + usbh_interface_desc_parse (pitf, (uint8_t *)&temp_pitf); + } + } + + usbh_endpoint_desc_parse (pep, (uint8_t *)pdesc); + prev_ep_size = SWAPBYTE((uint8_t *)pdesc + 4); + ep_ix++; + } + } + } + } + } + } + } + + prev_ep_size = 0U; + prev_itf = 0U; + } +} + +/*! + \brief parse the interface descriptor + \param[in] itf_desc: interface descriptor destination + \param[in] buf: buffer where the descriptor data is available + \param[out] none + \retval none +*/ +void usbh_interface_desc_parse (usb_descriptor_interface_struct *itf_desc, uint8_t *buf) +{ + itf_desc->Header.bLength = *(uint8_t *)(buf + 0U); + itf_desc->Header.bDescriptorType = *(uint8_t *)(buf + 1U); + itf_desc->bInterfaceNumber = *(uint8_t *)(buf + 2U); + itf_desc->bAlternateSetting = *(uint8_t *)(buf + 3U); + itf_desc->bNumEndpoints = *(uint8_t *)(buf + 4U); + itf_desc->bInterfaceClass = *(uint8_t *)(buf + 5U); + itf_desc->bInterfaceSubClass = *(uint8_t *)(buf + 6U); + itf_desc->bInterfaceProtocol = *(uint8_t *)(buf + 7U); + itf_desc->iInterface = *(uint8_t *)(buf + 8U); +} + +/*! + \brief parse the endpoint descriptor + \param[in] ep_desc: endpoint descriptor destination address + \param[in] buf: buffer where the parsed descriptor stored + \param[out] none + \retval none +*/ +void usbh_endpoint_desc_parse (usb_descriptor_endpoint_struct *ep_desc, uint8_t *buf) +{ + ep_desc->Header.bLength = *(uint8_t *)(buf + 0U); + ep_desc->Header.bDescriptorType = *(uint8_t *)(buf + 1U); + ep_desc->bEndpointAddress = *(uint8_t *)(buf + 2U); + ep_desc->bmAttributes = *(uint8_t *)(buf + 3U); + ep_desc->wMaxPacketSize = SWAPBYTE(buf + 4U); + ep_desc->bInterval = *(uint8_t *)(buf + 6U); +} + +/*! + \brief parse the string descriptor + \param[in] psrc: source pointer containing the descriptor data + \param[in] pdest: destination address pointer + \param[in] len: length of the descriptor + \param[out] none + \retval none +*/ +void usbh_string_desc_parse (uint8_t* psrc, uint8_t* pdest, uint16_t len) +{ + uint16_t strlength; + uint16_t idx; + + /* the unicode string descriptor is not null-terminated. the string length is + computed by substracting two from the value of the first byte of the descriptor. + */ + + /* check which is lower size, the size of string or the length of bytes read from the device */ + + if (USB_DESCTYPE_STRING == psrc[1]){ + /* make sure the descriptor is string type */ + + /* psrc[0] contains size of descriptor, subtract 2 to get the length of string */ + strlength = ((((uint16_t)psrc[0] - 2U) <= len) ? ((uint16_t)psrc[0] - 2U) : len); + psrc += 2; /* adjust the offset ignoring the string len and descriptor type */ + + for (idx = 0U; idx < strlength; idx += 2U) { + /* copy only the string and ignore the unicode id, hence add the src */ + *pdest = psrc[idx]; + pdest++; + } + + *pdest = 0U; /* mark end of string */ + } +} + +/*! + \brief get the next descriptor header + \param[in] pbuf: pointer to buffer where the cfg descriptor is available + \param[in] ptr: data popinter inside the configuration descriptor + \param[out] none + \retval next descriptor header +*/ +usb_descriptor_header_struct *usbh_next_desc_get (uint8_t *pbuf, uint16_t *ptr) +{ + uint8_t len = ((usb_descriptor_header_struct *)pbuf)->bLength; + + usb_descriptor_header_struct *pnext; + + *ptr += len; + + pnext = (usb_descriptor_header_struct *)((uint8_t *)pbuf + len); + + return(pnext); +} + diff --git a/bsp/gd32105c-eval/Libraries/SConscript b/bsp/gd32105c-eval/Libraries/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..bdfd09f67b98862eb01dfc2bdd1e13ea5b4ceefc --- /dev/null +++ b/bsp/gd32105c-eval/Libraries/SConscript @@ -0,0 +1,33 @@ +import rtconfig +from building import * + +# get current directory +cwd = GetCurrentDir() + +# The set of source files associated with this SConscript file. + +src = Glob('GD32F10x_standard_peripheral/Source/*.c') +src += [cwd + '/CMSIS/GD/GD32F10x/Source/system_gd32f10x.c'] + +#add for startup script +if rtconfig.CROSS_TOOL == 'gcc': + src += [cwd + '/CMSIS/GD/GD32F10x/Source/GCC/startup_gd32f10x_cl.S'] +elif rtconfig.CROSS_TOOL == 'keil': + src += [cwd + '/CMSIS/GD/GD32F10x/Source/ARM/startup_gd32f10x_cl.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += [cwd + '/CMSIS/GD/GD32F10x/Source/IAR/startup_gd32f10x_cl.s'] + +path = [ + cwd + '/CMSIS/GD/GD32F10x/Include', + cwd + '/CMSIS', + cwd + '/GD32F10x_standard_peripheral/Include',] + +if GetDepend(['RT_USING_BSP_USB']): + path += [cwd + '/GD32F10x_usbfs_driver/Include'] + src += [cwd + '/GD32F10x_usbfs_driver/Source'] + +CPPDEFINES = ['USE_STDPERIPH_DRIVER', 'GD32F10X_CL'] + +group = DefineGroup('Libraries', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') diff --git a/bsp/gd32105c-eval/README.md b/bsp/gd32105c-eval/README.md new file mode 100644 index 0000000000000000000000000000000000000000..3ae69f8226d5d8cfcde56c94a5c3f49cce06d146 --- /dev/null +++ b/bsp/gd32105c-eval/README.md @@ -0,0 +1,93 @@ +# GD32105C-EVAL # + +## 1. 简介 + +[GD32105C-EVAL](http://gd32mcu.21ic.com)是兆易科技提供的开发板，使用 GD32F105VCT6 作为主控制器。提供包括扩展引脚在内的及 SWD, Reset, Boot, User button key, LED, CAN, I2C, I2S, USART, RTC, LCD, SPI, ADC, DAC, EXMC, CTC, SDIO,USBD, GD-Link 等外设资源。 + +板载主要资源如下： + +| 硬件 | 描述 | +| -- | -- | +|CPU| Cortex-M3| +|主频| 120MHz | +|SRAM| 96KB | +|Flash| 256KB | + +## 2. 编译说明 + +GD32105C-EVAL板级包支持MDK5、IAR开发环境和GCC编译器，以下是具体版本信息： + +| IDE/编译器 | 已测试版本 | +| -- | -- | +| MDK5 | MDK5.25 | +| IAR | IAR8.20 | +| GCC | GCC 5.4.1 20160919 (release) | + +## 3. 烧写及执行 + +供电方式：开发板使用 Mini USB 接口或者 DC-005 连接器提供 5V 电源。 + +下载程序：下载程序到开发板需要一套 JLink 或者使用 GD-Link 工具。 + +解决IDE "Missing Device(s)"问题" +* MDK5: 安装GigaDevice.GD32F10x_DFP.2.0.1.pack，在 Folder Selection 中的 Destination Folder 那一栏选择 Keil uVision5 软件的安装目录，如 C:\Keil_v5，然后在 Option for Target 的 Device 选择对应的器件，同时在 Option forTarget 的 C/C++中添加路径 C:\Keil_v5\ARM\Pack\ARM\CMSIS\4.2.0\CMSIS\Include。 + +* IAR：安装 IAR_GD32F10x_ADDON.2.0.0.exe + +### 3.1 配置和仿真 + +工程已经默认使能了RT-Thread UART驱动、GPIO驱动、SPI驱动、I2C驱动。若想进一步配置工程请 +使用ENV工具。 + +### 3.2 运行结果 + +打开MDK或者IAR工程，进入仿真后全速运行，将会在串口0上看到RT-Thread的启动logo信息： + +``` + \ | / +- RT - Thread Operating System + / | \ 4.0.4 build Aug 23 2021 + 2006 - 2021 Copyright by rt-thread team +msh > + +``` + +## 4. 驱动支持情况及计划 + +| 驱动 | 支持情况 | 备注 | +| ------ | ---- | :------: | +| UART | 支持 | UART0/1/2/3 | +| GPIO | 支持 | | +| SPI | 支持 | SPI0/1/2 | +| I2C | 支持 | I2C0/1| + +### 4.1 IO在板级支持包中的映射情况 + +| IO号 | 板级包中的定义 | +| -- | -- | +| PA9 | USART0 TX | +| PA10 | USART0 RX | +| PA2 | USART1 TX | +| PA3 | USART1 RX | +| PA5| SPI0 SCK | +| PA6 | SPI0 MISO | +| PA6 | SPI0 MOSI | +| PB13| SPI1 SCK | +| PB14 | SPI1 MISO | +| PB15 | SPI1 MOSI | +| PB6| I2C0 SCL | +| PB7 | I2C0 SDA | +| PB10| I2C1 SCL | +| PB11 | I2C1 SDA | + +## 5. 联系人信息 + +维护人： + +- [lianzhian](https://gitee.com/qidiyun) + +## 6. 参考 + +* [GD32105C-EVAL](http://gd32mcu.21ic.com/site) + + diff --git a/bsp/gd32105c-eval/SConscript b/bsp/gd32105c-eval/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..fe0ae941ae9a759ae478de901caec1c961e56af8 --- /dev/null +++ b/bsp/gd32105c-eval/SConscript @@ -0,0 +1,14 @@ +# for module compiling +import os +Import('RTT_ROOT') + +cwd = str(Dir('#')) +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/gd32105c-eval/SConstruct b/bsp/gd32105c-eval/SConstruct new file mode 100644 index 0000000000000000000000000000000000000000..215861f94cb6efa359e555b9ff75907b6ef38282 --- /dev/null +++ b/bsp/gd32105c-eval/SConstruct @@ -0,0 +1,40 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rtthread-gd32f30x.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM == 'iar': + env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map project.map') + +Export('RTT_ROOT') +Export('rtconfig') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/gd32105c-eval/applications/SConscript b/bsp/gd32105c-eval/applications/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..01eb940dfb35f92c503a78b0b49a4354590f9f3a --- /dev/null +++ b/bsp/gd32105c-eval/applications/SConscript @@ -0,0 +1,11 @@ +Import('RTT_ROOT') +Import('rtconfig') +from building import * + +cwd = os.path.join(str(Dir('#')), 'applications') +src = Glob('*.c') +CPPPATH = [cwd, str(Dir('#'))] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/gd32105c-eval/applications/main.c b/bsp/gd32105c-eval/applications/main.c new file mode 100644 index 0000000000000000000000000000000000000000..83b68664a3700312b2c29830c23370d7f21c8702 --- /dev/null +++ b/bsp/gd32105c-eval/applications/main.c @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-24 lianzhian first implementation + */ +#include +#include +#include + + +/* defined the LED0 pin: PF0 */ +#define LED0_PIN GET_PIN(C, 0) + +int main(void) +{ + int count = 1; + /* set LED0 pin mode to output */ + rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); + + while (count++) + { + rt_pin_write(LED0_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_thread_mdelay(500); + } + + return RT_EOK; +} + diff --git a/bsp/gd32105c-eval/drivers/Kconfig b/bsp/gd32105c-eval/drivers/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..e2f6367a08136215811bca85bf911c574eb07aa1 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/Kconfig @@ -0,0 +1,69 @@ +menu "Hardware Drivers Config" + +menu "Onboard Peripheral Drivers" + +endmenu + +menu "On-chip Peripheral Drivers" + + config SOC_SERIES_GD32F1 + bool + default y + config SOC_GD32105C + bool + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + select SOC_SERIES_GD32F1 + default y + + config RT_USING_USART0 + bool "Using USART0" + select RT_USING_SERIAL + default y + + config RT_USING_USART1 + bool "Using USART1" + select RT_USING_SERIAL + default n + + config RT_USING_USART2 + bool "Using USART2" + select RT_USING_SERIAL + default n + + config RT_USING_UART3 + bool "Using UART3" + select RT_USING_SERIAL + default n + + config RT_USING_SPI0 + bool "Using SPI0" + select RT_USING_SPI + default y + + config RT_USING_SPI1 + bool "Using SPI1" + select RT_USING_SPI + default n + + config RT_USING_SPI2 + bool "Using SPI2" + select RT_USING_SPI + default n + + config RT_USING_I2C0 + bool "Using I2C0" + select RT_USING_I2C + default n + + config RT_USING_I2C1 + bool "Using I2C1" + select RT_USING_I2C + default n +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/gd32105c-eval/drivers/SConscript b/bsp/gd32105c-eval/drivers/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..77badf9a32a0e47c971159f48163656f46f4327f --- /dev/null +++ b/bsp/gd32105c-eval/drivers/SConscript @@ -0,0 +1,33 @@ +Import('RTT_ROOT') +Import('rtconfig') +from building import * + +cwd = os.path.join(str(Dir('#')), 'drivers') + +# add the general drivers. +src = Split(""" +board.c +drv_usart.c +""") + +CPPPATH = [cwd] + +# add spi drivers. +if GetDepend('RT_USING_SPI'): + src += ['drv_spi.c'] + +# add i2c drivers. +if GetDepend('RT_USING_I2C'): + src += ['drv_i2c.c'] + +# add pin drivers. +if GetDepend('RT_USING_PIN'): + src += ['drv_gpio.c'] + +# add spi flash drivers. +if GetDepend('RT_USING_SFUD'): + src += ['drv_spi_flash.c'] + +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/gd32105c-eval/drivers/board.c b/bsp/gd32105c-eval/drivers/board.c new file mode 100644 index 0000000000000000000000000000000000000000..6cfd569f1ac8c468dc8919b38529d10427e9f941 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/board.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ +#include +#include +#include +#include + +/** + * @brief This function is executed in case of error occurrence. + * @param None + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler */ + /* User can add his own implementation to report the HAL error return state */ + while (1) + { + } + /* USER CODE END Error_Handler */ +} + +/** System Clock Configuration +*/ +void SystemClock_Config(void) +{ + SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND); + NVIC_SetPriority(SysTick_IRQn, 0); +} + +/** + * This is the timer interrupt service routine. + * + */ +void SysTick_Handler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + rt_tick_increase(); + + /* leave interrupt */ + rt_interrupt_leave(); +} + +/** + * This function will initial GD32 board. + */ +void rt_hw_board_init() +{ + /* NVIC Configuration */ +#define NVIC_VTOR_MASK 0x3FFFFF80 +#ifdef VECT_TAB_RAM + /* Set the Vector Table base location at 0x10000000 */ + SCB->VTOR = (0x10000000 & NVIC_VTOR_MASK); +#else /* VECT_TAB_FLASH */ + /* Set the Vector Table base location at 0x08000000 */ + SCB->VTOR = (0x08000000 & NVIC_VTOR_MASK); +#endif + + SystemClock_Config(); + +#ifdef RT_USING_COMPONENTS_INIT + rt_components_board_init(); +#endif + +#ifdef RT_USING_CONSOLE + rt_console_set_device(RT_CONSOLE_DEVICE_NAME); +#endif + +#ifdef RT_USING_HEAP + rt_system_heap_init((void*)HEAP_BEGIN, (void*)HEAP_END); +#endif +} + +/*@}*/ diff --git a/bsp/gd32105c-eval/drivers/board.h b/bsp/gd32105c-eval/drivers/board.h new file mode 100644 index 0000000000000000000000000000000000000000..7b791f25c9ae507d1c7eda4179cbb0aca5bd0c8a --- /dev/null +++ b/bsp/gd32105c-eval/drivers/board.h @@ -0,0 +1,44 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +// <<< Use Configuration Wizard in Context Menu >>> +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include "drv_gpio.h" + +// Internal SRAM memory size[Kbytes] <8-64> +// Default: 64 +#ifdef __ICCARM__ +// Use *.icf ram symbal, to avoid hardcode. +extern char __ICFEDIT_region_RAM_end__; +#define GD32_SRAM_END &__ICFEDIT_region_RAM_end__ +#else +#define GD32_SRAM_SIZE 96 +#define GD32_SRAM_END (0x20000000 + GD32_SRAM_SIZE * 1024) +#endif + +#ifdef __CC_ARM +extern int Image$$RW_IRAM1$$ZI$$Limit; +#define HEAP_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit) +#elif __ICCARM__ +#pragma section="HEAP" +#define HEAP_BEGIN (__segment_end("HEAP")) +#else +extern int __bss_end; +#define HEAP_BEGIN (&__bss_end) +#endif + +#define HEAP_END GD32_SRAM_END + +#endif + +//*** <<< end of configuration section >>> *** diff --git a/bsp/gd32105c-eval/drivers/drv_comm.h b/bsp/gd32105c-eval/drivers/drv_comm.h new file mode 100644 index 0000000000000000000000000000000000000000..0881776e60dd25f49f5fa6b3125295a7bc3da65c --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_comm.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +#ifndef __DRV_COMM_H__ +#define __DRV_COMM_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof(x[0])) +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* __DRV_HWTIMER_H__ */ + diff --git a/bsp/gd32105c-eval/drivers/drv_gpio.c b/bsp/gd32105c-eval/drivers/drv_gpio.c new file mode 100644 index 0000000000000000000000000000000000000000..a2df652ab09cf58b5ad8a6fe07347c062b117451 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_gpio.c @@ -0,0 +1,552 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ +#include +#include +#include "drv_gpio.h" +#include +#include +#include "gd32f10x.h" +#include "gd32f10x_exti.h" + +#ifdef RT_USING_PIN + +#define __GD32_PIN(index, port, pin) {index, RCU_GPIO##port, GPIO##port, \ + GPIO_PIN_##pin, GPIO_PORT_SOURCE_GPIO##port, GPIO_PIN_SOURCE_##pin} +#define __GD32_PIN_DEFAULT {-1, (rcu_periph_enum)0, 0, 0, 0, 0} + +/* GD32 GPIO driver */ +struct pin_index +{ + rt_int16_t index; + rcu_periph_enum clk; + rt_uint32_t gpio_periph; + rt_uint32_t pin; + rt_uint8_t port_src; + rt_uint8_t pin_src; +}; + +static const struct pin_index pins[] = +{ + __GD32_PIN(0 , A, 0 ), + __GD32_PIN(1 , A, 1 ), + __GD32_PIN(2 , A, 2 ), + __GD32_PIN(3 , A, 3 ), + __GD32_PIN(4 , A, 4 ), + __GD32_PIN(5 , A, 5 ), + __GD32_PIN(6 , A, 6 ), + __GD32_PIN(7 , A, 7 ), + __GD32_PIN(8 , A, 8 ), + __GD32_PIN(9 , A, 9 ), + __GD32_PIN(10, A, 10), + __GD32_PIN(11, A, 11), + __GD32_PIN(12, A, 12), + __GD32_PIN(13, A, 13), + __GD32_PIN(14, A, 14), + __GD32_PIN(15, A, 15), + + __GD32_PIN(16, B, 0), + __GD32_PIN(17, B, 1), + __GD32_PIN(18, B, 2), + __GD32_PIN(19, B, 3), + __GD32_PIN(20, B, 4), + __GD32_PIN(21, B, 5), + __GD32_PIN(22, B, 6), + __GD32_PIN(23, B, 7), + __GD32_PIN(24, B, 8), + __GD32_PIN(25, B, 9), + __GD32_PIN(26, B, 10), + __GD32_PIN(27, B, 11), + __GD32_PIN(28, B, 12), + __GD32_PIN(29, B, 13), + __GD32_PIN(30, B, 14), + __GD32_PIN(31, B, 15), + + __GD32_PIN(32, C, 0), + __GD32_PIN(33, C, 1), + __GD32_PIN(34, C, 2), + __GD32_PIN(35, C, 3), + __GD32_PIN(36, C, 4), + __GD32_PIN(37, C, 5), + __GD32_PIN(38, C, 6), + __GD32_PIN(39, C, 7), + __GD32_PIN(40, C, 8), + __GD32_PIN(41, C, 9), + __GD32_PIN(42, C, 10), + __GD32_PIN(43, C, 11), + __GD32_PIN(44, C, 12), + __GD32_PIN(45, C, 13), + __GD32_PIN(46, C, 14), + __GD32_PIN(47, C, 15), + + __GD32_PIN(48, D, 0), + __GD32_PIN(49, D, 1), + __GD32_PIN(50, D, 2), + __GD32_PIN(51, D, 3), + __GD32_PIN(52, D, 4), + __GD32_PIN(53, D, 5), + __GD32_PIN(54, D, 6), + __GD32_PIN(55, D, 7), + __GD32_PIN(56, D, 8), + __GD32_PIN(57, D, 9), + __GD32_PIN(58, D, 10), + __GD32_PIN(59, D, 11), + __GD32_PIN(60, D, 12), + __GD32_PIN(61, D, 13), + __GD32_PIN(62, D, 14), + __GD32_PIN(63, D, 15), + + __GD32_PIN(64, E, 0), + __GD32_PIN(65, E, 1), + __GD32_PIN(66, E, 2), + __GD32_PIN(67, E, 3), + __GD32_PIN(68, E, 4), + __GD32_PIN(69, E, 5), + __GD32_PIN(70, E, 6), + __GD32_PIN(71, E, 7), + __GD32_PIN(72, E, 8), + __GD32_PIN(73, E, 9), + __GD32_PIN(74, E, 10), + __GD32_PIN(75, E, 11), + __GD32_PIN(76, E, 12), + __GD32_PIN(77, E, 13), + __GD32_PIN(78, E, 14), + __GD32_PIN(79, E, 15), + + __GD32_PIN(80, F, 0), + __GD32_PIN(81, F, 1), + __GD32_PIN(82, F, 2), + __GD32_PIN(83, F, 3), + __GD32_PIN(84, F, 4), + __GD32_PIN(85, F, 5), + __GD32_PIN(86, F, 6), + __GD32_PIN(87, F, 7), + __GD32_PIN(88, F, 8), + __GD32_PIN(89, F, 9), + __GD32_PIN(90, F, 10), + __GD32_PIN(91, F, 11), + __GD32_PIN(92, F, 12), + __GD32_PIN(93, F, 13), + __GD32_PIN(94, F, 14), + __GD32_PIN(95, F, 15), + + __GD32_PIN(96, G, 0), + __GD32_PIN(97, G, 1), + __GD32_PIN(98, G, 2), + __GD32_PIN(99, G, 3), + __GD32_PIN(100, G, 4), + __GD32_PIN(101, G, 5), + __GD32_PIN(102, G, 6), + __GD32_PIN(103, G, 7), + __GD32_PIN(104, G, 8), + __GD32_PIN(105, G, 9), + __GD32_PIN(106, G, 10), + __GD32_PIN(107, G, 11), + __GD32_PIN(108, G, 12), + __GD32_PIN(109, G, 13), + __GD32_PIN(110, G, 14), + __GD32_PIN(111, G, 15), + + +}; + +struct pin_irq_map +{ + rt_uint16_t pinbit; + IRQn_Type irqno; +}; +static const struct pin_irq_map pin_irq_map[] = +{ + {GPIO_PIN_0, EXTI0_IRQn}, + {GPIO_PIN_1, EXTI1_IRQn}, + {GPIO_PIN_2, EXTI2_IRQn}, + {GPIO_PIN_3, EXTI3_IRQn}, + {GPIO_PIN_4, EXTI4_IRQn}, + {GPIO_PIN_5, EXTI5_9_IRQn}, + {GPIO_PIN_6, EXTI5_9_IRQn}, + {GPIO_PIN_7, EXTI5_9_IRQn}, + {GPIO_PIN_8, EXTI5_9_IRQn}, + {GPIO_PIN_9, EXTI5_9_IRQn}, + {GPIO_PIN_10, EXTI10_15_IRQn}, + {GPIO_PIN_11, EXTI10_15_IRQn}, + {GPIO_PIN_12, EXTI10_15_IRQn}, + {GPIO_PIN_13, EXTI10_15_IRQn}, + {GPIO_PIN_14, EXTI10_15_IRQn}, + {GPIO_PIN_15, EXTI10_15_IRQn}, +}; +struct rt_pin_irq_hdr pin_irq_hdr_tab[] = +{ + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, +}; + +#define ITEM_NUM(items) sizeof(items) / sizeof(items[0]) +const struct pin_index *get_pin(rt_uint8_t pin) +{ + const struct pin_index *index; + + if (pin < ITEM_NUM(pins)) + { + index = &pins[pin]; + if (index->index == -1) + index = RT_NULL; + } + else + { + index = RT_NULL; + } + + return index; +}; + +void gd32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode) +{ + const struct pin_index *index; + rt_uint32_t pin_mode; + index = get_pin(pin); + if (index == RT_NULL) + { + return; + } + + /* GPIO Periph clock enable */ + rcu_periph_clock_enable(index->clk); + pin_mode = GPIO_MODE_OUT_PP; + + switch(mode) + { + case PIN_MODE_OUTPUT: + /* output setting */ + pin_mode = GPIO_MODE_OUT_PP; + break; + case PIN_MODE_OUTPUT_OD: + /* output setting: od. */ + pin_mode = GPIO_MODE_OUT_OD; + break; + case PIN_MODE_INPUT: + /* input setting: not pull. */ + pin_mode = GPIO_MODE_IN_FLOATING; + break; + case PIN_MODE_INPUT_PULLUP: + /* input setting: pull up. */ + pin_mode = GPIO_MODE_IPU; + break; + case PIN_MODE_INPUT_PULLDOWN: + /* input setting: pull down. */ + pin_mode = GPIO_MODE_IPD; + break; + default: + break; + } + + gpio_init(index->gpio_periph, pin_mode, GPIO_OSPEED_50MHZ, index->pin); +} + +void gd32_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value) +{ + const struct pin_index *index; + + index = get_pin(pin); + if (index == RT_NULL) + { + return; + } + + gpio_bit_write(index->gpio_periph, index->pin, (bit_status)value); +} + +int gd32_pin_read(rt_device_t dev, rt_base_t pin) +{ + int value; + const struct pin_index *index; + + value = PIN_LOW; + + index = get_pin(pin); + if (index == RT_NULL) + { + return value; + } + + value = gpio_input_bit_get(index->gpio_periph, index->pin); + + return value; +} + + +rt_inline rt_int32_t bit2bitno(rt_uint32_t bit) +{ + rt_uint8_t i; + for (i = 0; i < 32; i++) + { + if ((0x01 << i) == bit) + { + return i; + } + } + return -1; +} +rt_inline const struct pin_irq_map *get_pin_irq_map(rt_uint32_t pinbit) +{ + rt_int32_t mapindex = bit2bitno(pinbit); + if (mapindex < 0 || mapindex >= ITEM_NUM(pin_irq_map)) + { + return RT_NULL; + } + return &pin_irq_map[mapindex]; +}; +rt_err_t gd32_pin_attach_irq(struct rt_device *device, rt_int32_t pin, + rt_uint32_t mode, void (*hdr)(void *args), void *args) +{ + const struct pin_index *index; + rt_base_t level; + rt_int32_t hdr_index = -1; + + index = get_pin(pin); + if (index == RT_NULL) + { + return RT_EINVAL; + } + hdr_index = bit2bitno(index->pin); + if (hdr_index < 0 || hdr_index >= ITEM_NUM(pin_irq_map)) + { + return RT_EINVAL; + } + + level = rt_hw_interrupt_disable(); + if (pin_irq_hdr_tab[hdr_index].pin == pin && + pin_irq_hdr_tab[hdr_index].hdr == hdr && + pin_irq_hdr_tab[hdr_index].mode == mode && + pin_irq_hdr_tab[hdr_index].args == args) + { + rt_hw_interrupt_enable(level); + return RT_EOK; + } + if (pin_irq_hdr_tab[hdr_index].pin != -1) + { + rt_hw_interrupt_enable(level); + return RT_EFULL; + } + pin_irq_hdr_tab[hdr_index].pin = pin; + pin_irq_hdr_tab[hdr_index].hdr = hdr; + pin_irq_hdr_tab[hdr_index].mode = mode; + pin_irq_hdr_tab[hdr_index].args = args; + rt_hw_interrupt_enable(level); + + return RT_EOK; +} +rt_err_t gd32_pin_detach_irq(struct rt_device *device, rt_int32_t pin) +{ + const struct pin_index *index; + rt_base_t level; + rt_int32_t hdr_index = -1; + + index = get_pin(pin); + if (index == RT_NULL) + { + return RT_EINVAL; + } + hdr_index = bit2bitno(index->pin); + if (hdr_index < 0 || hdr_index >= ITEM_NUM(pin_irq_map)) + { + return RT_EINVAL; + } + + level = rt_hw_interrupt_disable(); + if (pin_irq_hdr_tab[hdr_index].pin == -1) + { + rt_hw_interrupt_enable(level); + return RT_EOK; + } + pin_irq_hdr_tab[hdr_index].pin = -1; + pin_irq_hdr_tab[hdr_index].hdr = RT_NULL; + pin_irq_hdr_tab[hdr_index].mode = 0; + pin_irq_hdr_tab[hdr_index].args = RT_NULL; + rt_hw_interrupt_enable(level); + + return RT_EOK; +} +rt_err_t gd32_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_t enabled) +{ + const struct pin_index *index; + const struct pin_irq_map *irqmap; + rt_base_t level; + rt_int32_t hdr_index = -1; + exti_trig_type_enum trigger_mode; + + index = get_pin(pin); + if (index == RT_NULL) + { + return RT_EINVAL; + } + if (enabled == PIN_IRQ_ENABLE) + { + hdr_index = bit2bitno(index->pin); + if (hdr_index < 0 || hdr_index >= ITEM_NUM(pin_irq_map)) + { + return RT_EINVAL; + } + level = rt_hw_interrupt_disable(); + if (pin_irq_hdr_tab[hdr_index].pin == -1) + { + rt_hw_interrupt_enable(level); + return RT_EINVAL; + } + irqmap = &pin_irq_map[hdr_index]; + + switch (pin_irq_hdr_tab[hdr_index].mode) + { + case PIN_IRQ_MODE_RISING: + trigger_mode = EXTI_TRIG_RISING; + break; + case PIN_IRQ_MODE_FALLING: + trigger_mode = EXTI_TRIG_FALLING; + break; + case PIN_IRQ_MODE_RISING_FALLING: + trigger_mode = EXTI_TRIG_BOTH; + break; + default: + rt_hw_interrupt_enable(level); + return RT_EINVAL; + } + + rcu_periph_clock_enable(RCU_AF); + + /* enable and set interrupt priority */ + nvic_irq_enable(irqmap->irqno, 5U, 0U); + + /* connect EXTI line to GPIO pin */ + gpio_exti_source_select(index->port_src, index->pin_src); + + /* configure EXTI line */ + exti_init((exti_line_enum)(index->pin), EXTI_INTERRUPT, trigger_mode); + exti_interrupt_flag_clear((exti_line_enum)(index->pin)); + + rt_hw_interrupt_enable(level); + } + else if (enabled == PIN_IRQ_DISABLE) + { + irqmap = get_pin_irq_map(index->pin); + if (irqmap == RT_NULL) + { + return RT_EINVAL; + } + nvic_irq_disable(irqmap->irqno); + } + else + { + return RT_EINVAL; + } + + return RT_EOK; +} +const static struct rt_pin_ops _gd32_pin_ops = +{ + gd32_pin_mode, + gd32_pin_write, + gd32_pin_read, + gd32_pin_attach_irq, + gd32_pin_detach_irq, + gd32_pin_irq_enable, + RT_NULL, +}; + +int rt_hw_pin_init(void) +{ + int result; + + result = rt_device_pin_register("pin", &_gd32_pin_ops, RT_NULL); + + return result; +} +INIT_BOARD_EXPORT(rt_hw_pin_init); + +rt_inline void pin_irq_hdr(int irqno) +{ + if (pin_irq_hdr_tab[irqno].hdr) + { + pin_irq_hdr_tab[irqno].hdr(pin_irq_hdr_tab[irqno].args); + } +} + +void GD32_GPIO_EXTI_IRQHandler(rt_int8_t exti_line) +{ + if(RESET != exti_interrupt_flag_get((exti_line_enum)(1 << exti_line))) + { + pin_irq_hdr(exti_line); + exti_interrupt_flag_clear((exti_line_enum)(1 << exti_line)); + } +} +void EXTI0_IRQHandler(void) +{ + rt_interrupt_enter(); + GD32_GPIO_EXTI_IRQHandler(0); + rt_interrupt_leave(); +} +void EXTI1_IRQHandler(void) +{ + rt_interrupt_enter(); + GD32_GPIO_EXTI_IRQHandler(1); + rt_interrupt_leave(); +} +void EXTI2_IRQHandler(void) +{ + rt_interrupt_enter(); + GD32_GPIO_EXTI_IRQHandler(2); + rt_interrupt_leave(); +} +void EXTI3_IRQHandler(void) +{ + rt_interrupt_enter(); + GD32_GPIO_EXTI_IRQHandler(3); + rt_interrupt_leave(); +} +void EXTI4_IRQHandler(void) +{ + rt_interrupt_enter(); + GD32_GPIO_EXTI_IRQHandler(4); + rt_interrupt_leave(); +} +void EXTI5_9_IRQHandler(void) +{ + rt_interrupt_enter(); + GD32_GPIO_EXTI_IRQHandler(5); + GD32_GPIO_EXTI_IRQHandler(6); + GD32_GPIO_EXTI_IRQHandler(7); + GD32_GPIO_EXTI_IRQHandler(8); + GD32_GPIO_EXTI_IRQHandler(9); + rt_interrupt_leave(); +} +void EXTI10_15_IRQHandler(void) +{ + rt_interrupt_enter(); + GD32_GPIO_EXTI_IRQHandler(10); + GD32_GPIO_EXTI_IRQHandler(11); + GD32_GPIO_EXTI_IRQHandler(12); + GD32_GPIO_EXTI_IRQHandler(13); + GD32_GPIO_EXTI_IRQHandler(14); + GD32_GPIO_EXTI_IRQHandler(15); + rt_interrupt_leave(); +} + +#endif diff --git a/bsp/gd32105c-eval/drivers/drv_gpio.h b/bsp/gd32105c-eval/drivers/drv_gpio.h new file mode 100644 index 0000000000000000000000000000000000000000..0cdedb9acbd279d06a612e801e64ea7a5eea0520 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_gpio.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +#ifndef __DRV_GPIO_H__ +#define __DRV_GPIO_H__ + +#include +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +#define __GD32_PORT(port) GPIO##port + +#define GET_PIN(PORTx,PIN) (rt_base_t)((16 * ( ((rt_base_t)__GD32_PORT(PORTx) - (rt_base_t)GPIO_BASE)/(0x0400UL) )) + PIN) + +#define PIN_NUM(port, no) (((((port) & 0xFu) << 4) | ((no) & 0xFu))) +#define PIN_PORT(pin) ((uint8_t)(((pin) >> 4) & 0xFu)) +#define PIN_NO(pin) ((uint8_t)((pin) & 0xFu)) + +#define PIN_GDPIN(pin) ((uint16_t)(1u << PIN_NO(pin))) + + + +#ifdef __cplusplus +} +#endif + +#endif /* __DRV_GPIO_H__ */ diff --git a/bsp/gd32105c-eval/drivers/drv_i2c.c b/bsp/gd32105c-eval/drivers/drv_i2c.c new file mode 100644 index 0000000000000000000000000000000000000000..6d3d2cedcc1aba86e5c412c8e4c80d3cd10e0346 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_i2c.c @@ -0,0 +1,373 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +#include "drv_i2c.h" +#include +#include "gd32f10x.h" + +#ifdef RT_USING_I2C + +#include + +#define DBG_TAG "drv.I2C" +#ifdef RT_I2C_DEBUG +#define DBG_LVL DBG_LOG +#else +#define DBG_LVL DBG_INFO +#endif +#include + +#ifdef RT_USING_I2C_BITOPS + +/*user can change this*/ +#define I2C_BUS_NAME "i2c2" + +/*user should change this to adapt specific board*/ +#define I2C_SCL_PIN GPIO_PIN_4 +#define I2C_SCL_PORT GPIOE +#define I2C_SCL_CLK RCU_GPIOE +#define I2C_SDA_PIN GPIO_PIN_5 +#define I2C_SDA_PORT GPIOE +#define I2C_SDA_CLK RCU_GPIOE + +struct gd32_i2c_bit_data +{ + struct + { + rcu_periph_enum clk; + rt_uint32_t port; + rt_uint32_t pin; + }scl, sda; +}; + +static void gpio_set_sda(void *data, rt_int32_t state) +{ + struct gd32_i2c_bit_data* bd = data; + + if (state) + { + gpio_bit_set(bd->sda.port, bd->sda.pin); + } + else + { + gpio_bit_reset(bd->sda.port, bd->sda.pin); + } +} + +static void gpio_set_scl(void *data, rt_int32_t state) +{ + struct gd32_i2c_bit_data* bd = data; + if (state) + { + gpio_bit_set(bd->scl.port, bd->scl.pin); + } + else + { + gpio_bit_reset(bd->scl.port, bd->scl.pin); + } +} + +static rt_int32_t gpio_get_sda(void *data) +{ + struct gd32_i2c_bit_data* bd = data; + + return gpio_input_bit_get(bd->sda.port, bd->sda.pin); +} + +static rt_int32_t gpio_get_scl(void *data) +{ + struct gd32_i2c_bit_data* bd = data; + + return gpio_input_bit_get(bd->scl.port, bd->scl.pin); +} + +static void gpio_udelay(rt_uint32_t us) +{ + int i = ( rcu_clock_freq_get(CK_SYS) / 4000000 * us); + while(i) + { + i--; + } +} + +static void drv_i2c_gpio_init(const struct gd32_i2c_bit_data* bd) +{ + rcu_periph_clock_enable(bd->sda.clk); + rcu_periph_clock_enable(bd->scl.clk); + gpio_init(bd->sda.port, GPIO_MODE_OUT_OD, GPIO_OSPEED_10MHZ, bd->sda.pin); + gpio_init(bd->scl.port, GPIO_MODE_OUT_OD, GPIO_OSPEED_10MHZ, bd->scl.pin); + + gpio_bit_set(bd->sda.port, bd->sda.pin); + gpio_bit_set(bd->scl.port, bd->scl.pin); +} + +#else /* use hardware i2c */ + +struct gd32_i2c_bus +{ + struct rt_i2c_bus_device parent; + rt_uint32_t i2c_periph; +}; + +static int gd32_i2c_read(rt_uint32_t i2c_periph, rt_uint16_t slave_address, rt_uint8_t* p_buffer, rt_uint16_t data_byte) +{ + /* wait until I2C bus is idle */ + while(i2c_flag_get(i2c_periph, I2C_FLAG_I2CBSY)); + + /* send a start condition to I2C bus */ + i2c_start_on_bus(i2c_periph); + + /* wait until SBSEND bit is set */ + while(!i2c_flag_get(i2c_periph, I2C_FLAG_SBSEND)); + + /* send slave address to I2C bus */ + i2c_master_addressing(i2c_periph, slave_address<<1, I2C_RECEIVER); + + /* wait until ADDSEND bit is set */ + while(!i2c_flag_get(i2c_periph, I2C_FLAG_ADDSEND)); + + /* clear the ADDSEND bit */ + i2c_flag_clear(i2c_periph,I2C_FLAG_ADDSEND); + + if(1 == data_byte){ + /* disable acknowledge */ + i2c_ack_config(i2c_periph,I2C_ACK_DISABLE); + /* send a stop condition to I2C bus */ + i2c_stop_on_bus(i2c_periph); + } + + /* while there is data to be read */ + while(data_byte) + { + /* wait until the RBNE bit is set and clear it */ + if(i2c_flag_get(i2c_periph, I2C_FLAG_RBNE)) + { + /* read a byte from the EEPROM */ + *p_buffer = i2c_data_receive(i2c_periph); + + /* point to the next location where the byte read will be saved */ + p_buffer++; + + /* decrement the read bytes counter */ + data_byte--; + if(1 == data_byte) + { + /* disable acknowledge */ + i2c_ack_config(i2c_periph,I2C_ACK_DISABLE); + /* send a stop condition to I2C bus */ + i2c_stop_on_bus(i2c_periph); + } + } + } + + /* wait until the stop condition is finished */ + while(I2C_CTL0(i2c_periph)&0x0200); + + /* enable acknowledge */ + i2c_ack_config(i2c_periph,I2C_ACK_ENABLE); + + i2c_ackpos_config(i2c_periph,I2C_ACKPOS_CURRENT); + + return 0; +} + +static int gd32_i2c_write(rt_uint32_t i2c_periph, uint16_t slave_address, uint8_t* p_buffer, uint16_t data_byte) +{ + /* wait until I2C bus is idle */ + while(i2c_flag_get(i2c_periph, I2C_FLAG_I2CBSY)); + + /* send a start condition to I2C bus */ + i2c_start_on_bus(i2c_periph); + + /* wait until SBSEND bit is set */ + while(!i2c_flag_get(i2c_periph, I2C_FLAG_SBSEND)); + + /* send slave address to I2C bus */ + i2c_master_addressing(i2c_periph, slave_address<<1, I2C_TRANSMITTER); + + /* wait until ADDSEND bit is set */ + while(!i2c_flag_get(i2c_periph, I2C_FLAG_ADDSEND)); + + /* clear the ADDSEND bit */ + i2c_flag_clear(i2c_periph,I2C_FLAG_ADDSEND); + + /* wait until the transmit data buffer is empty */ + while(SET != i2c_flag_get( i2c_periph , I2C_FLAG_TBE)); + + /* while there is data to be read */ + while(data_byte) + { + i2c_data_transmit(i2c_periph, *p_buffer); + + /* point to the next byte to be written */ + p_buffer++; + + /* decrement the write bytes counter */ + data_byte --; + + /* wait until BTC bit is set */ + while(!i2c_flag_get(i2c_periph, I2C_FLAG_BTC)); + } + + /* send a stop condition to I2C bus */ + i2c_stop_on_bus(i2c_periph); + + /* wait until the stop condition is finished */ + while(I2C_CTL0(i2c_periph)&0x0200); + + return 0; +} + +static rt_size_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num) +{ + struct rt_i2c_msg *msg; + rt_uint32_t i; + rt_err_t ret = RT_ERROR; + + struct gd32_i2c_bus *gd32_i2c = (struct gd32_i2c_bus *)bus; + + for (i = 0; i < num; i++) + { + msg = &msgs[i]; + + if (msg->flags & RT_I2C_ADDR_10BIT) + { + i2c_mode_addr_config(gd32_i2c->i2c_periph,I2C_I2CMODE_ENABLE,I2C_ADDFORMAT_10BITS,0); + } + else + { + i2c_mode_addr_config(gd32_i2c->i2c_periph,I2C_I2CMODE_ENABLE,I2C_ADDFORMAT_7BITS,0); + } + if (msg->flags & RT_I2C_RD) + { + if (gd32_i2c_read(gd32_i2c->i2c_periph, msg->addr, msg->buf, msg->len) != 0) + { + LOG_E("i2c bus write failed,i2c bus stop!"); + goto out; + } + } + else + { + if (gd32_i2c_write(gd32_i2c->i2c_periph, msg->addr, msg->buf, msg->len) != 0) + { + LOG_E("i2c bus write failed,i2c bus stop!"); + goto out; + } + } + } + + ret = i; + +out: + LOG_E("send stop condition\n"); + + return ret; +} + +static const struct rt_i2c_bus_device_ops i2c_ops = +{ + gd32_i2c_xfer, + RT_NULL, + RT_NULL +}; + +#endif /* RT_USING_I2C_BITOPS */ + +int rt_hw_i2c_init(void) +{ +#ifdef RT_USING_I2C_BITOPS + { + static struct rt_i2c_bus_device i2c_device; + static const struct gd32_i2c_bit_data _i2c_bdata = + { + /* SCL */ + { I2C_SCL_CLK, I2C_SCL_PORT, I2C_SCL_PIN}, + /* SDA */ + { I2C_SDA_CLK, I2C_SDA_PORT, I2C_SDA_PIN}, + }; + + static const struct rt_i2c_bit_ops _i2c_bit_ops = + { + (void*)&_i2c_bdata, + gpio_set_sda, + gpio_set_scl, + gpio_get_sda, + gpio_get_scl, + gpio_udelay, + 1, + 100 + }; + + drv_i2c_gpio_init(&_i2c_bdata); + + i2c_device.priv = (void *)&_i2c_bit_ops; + rt_i2c_bit_add_bus(&i2c_device, I2C_BUS_NAME); + } + +#else /* register hardware I2C */ + +#ifdef RT_USING_I2C0 +#define I2C0_SPEED 100000 + + static struct gd32_i2c_bus gd32_i2c0; + /* enable GPIOB clock */ + rcu_periph_clock_enable(RCU_GPIOB); + + /* connect PB6 to I2C0_SCL, PB7 to I2C0_SDA */ + gpio_init(GPIOB, GPIO_MODE_AF_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_6 | GPIO_PIN_7); + + /* enable I2C clock */ + rcu_periph_clock_enable(RCU_I2C0); + /* configure I2C clock */ + i2c_clock_config(I2C0,I2C0_SPEED,I2C_DTCY_2); + + i2c_enable(I2C0); + /* enable acknowledge */ + i2c_ack_config(I2C0,I2C_ACK_ENABLE); + + rt_memset((void *)&gd32_i2c0, 0, sizeof(struct gd32_i2c_bus)); + gd32_i2c0.parent.ops = &i2c_ops; + gd32_i2c0.i2c_periph = I2C0; + rt_i2c_bus_device_register(&gd32_i2c0.parent, "i2c0"); +#endif + +#ifdef RT_USING_I2C1 +#define I2C1_SPEED 100000 + + static struct gd32_i2c_bus gd32_i2c1; + /* enable GPIOB clock */ + rcu_periph_clock_enable(RCU_GPIOB); + + /* connect PB10 to I2C1_SCL, PB11 to I2C1_SDA */ + gpio_init(GPIOB, GPIO_MODE_AF_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_10 | GPIO_PIN_11); + + /* enable I2C clock */ + rcu_periph_clock_enable(RCU_I2C1); + /* configure I2C clock */ + i2c_clock_config(I2C1,I2C1_SPEED,I2C_DTCY_2); + + i2c_enable(I2C1); + /* enable acknowledge */ + i2c_ack_config(I2C1,I2C_ACK_ENABLE); + + rt_memset((void *)&gd32_i2c1, 0, sizeof(struct gd32_i2c_bus)); + gd32_i2c1.parent.ops = &i2c_ops; + gd32_i2c1.i2c_periph = I2C1; + rt_i2c_bus_device_register(&gd32_i2c1.parent, "i2c1"); +#endif + +#endif /* RT_USING_I2C_BITOPS */ + + return 0; +} +INIT_DEVICE_EXPORT(rt_hw_i2c_init); + +#endif +/* end of i2c driver */ diff --git a/bsp/gd32105c-eval/drivers/drv_i2c.h b/bsp/gd32105c-eval/drivers/drv_i2c.h new file mode 100644 index 0000000000000000000000000000000000000000..fb34ff2b09e17b21b2bb14fc8a7f2d62bea1f078 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_i2c.h @@ -0,0 +1,15 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +#ifndef __DRV_I2C__ +#define __DRV_I2C__ + + +#endif diff --git a/bsp/gd32105c-eval/drivers/drv_spi.c b/bsp/gd32105c-eval/drivers/drv_spi.c new file mode 100644 index 0000000000000000000000000000000000000000..7e4c017fcdfc0211d7ad7547f786e9bc42310b40 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_spi.c @@ -0,0 +1,297 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +#include "drv_spi.h" +#include "gd32f10x.h" +#include + +#if defined(RT_USING_SPI) && defined(RT_USING_PIN) +#include + +#if !defined(RT_USING_SPI0) && !defined(RT_USING_SPI1) && \ + !defined(RT_USING_SPI2) +#error "Please define at least one SPIx" +#endif + +/* #define DEBUG */ +#ifdef DEBUG +#define DEBUG_PRINTF(...) rt_kprintf(__VA_ARGS__) +#else +#define DEBUG_PRINTF(...) +#endif + +/* private rt-thread spi ops function */ +static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configuration* configuration); +static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* message); + +static struct rt_spi_ops gd32_spi_ops = +{ + configure, + xfer +}; + +static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configuration* configuration) +{ + spi_parameter_struct spi_init_struct; + + rt_uint32_t spi_periph = (rt_uint32_t)device->bus->parent.user_data; + + RT_ASSERT(device != RT_NULL); + RT_ASSERT(configuration != RT_NULL); + + if(configuration->data_width <= 8) + { + spi_init_struct.frame_size = SPI_FRAMESIZE_8BIT; + } + else if(configuration->data_width <= 16) + { + spi_init_struct.frame_size = SPI_FRAMESIZE_16BIT; + } + else + { + return RT_EIO; + } + + { + rcu_clock_freq_enum spi_src; + rt_uint32_t spi_apb_clock; + rt_uint32_t max_hz; + + max_hz = configuration->max_hz; + + DEBUG_PRINTF("sys freq: %d\n", rcu_clock_freq_get(CK_SYS)); + DEBUG_PRINTF("CK_APB2 freq: %d\n", rcu_clock_freq_get(CK_APB2)); + DEBUG_PRINTF("max freq: %d\n", max_hz); + + if (spi_periph == SPI1 || spi_periph == SPI2) + { + spi_src = CK_APB1; + } + else + { + spi_src = CK_APB2; + } + spi_apb_clock = rcu_clock_freq_get(spi_src); + + if(max_hz >= spi_apb_clock/2) + { + spi_init_struct.prescale = SPI_PSC_2; + } + else if (max_hz >= spi_apb_clock/4) + { + spi_init_struct.prescale = SPI_PSC_4; + } + else if (max_hz >= spi_apb_clock/8) + { + spi_init_struct.prescale = SPI_PSC_8; + } + else if (max_hz >= spi_apb_clock/16) + { + spi_init_struct.prescale = SPI_PSC_16; + } + else if (max_hz >= spi_apb_clock/32) + { + spi_init_struct.prescale = SPI_PSC_32; + } + else if (max_hz >= spi_apb_clock/64) + { + spi_init_struct.prescale = SPI_PSC_64; + } + else if (max_hz >= spi_apb_clock/128) + { + spi_init_struct.prescale = SPI_PSC_128; + } + else + { + /* min prescaler 256 */ + spi_init_struct.prescale = SPI_PSC_256; + } + } /* baudrate */ + + switch(configuration->mode & RT_SPI_MODE_3) + { + case RT_SPI_MODE_0: + spi_init_struct.clock_polarity_phase = SPI_CK_PL_LOW_PH_1EDGE; + break; + case RT_SPI_MODE_1: + spi_init_struct.clock_polarity_phase = SPI_CK_PL_LOW_PH_2EDGE; + break; + case RT_SPI_MODE_2: + spi_init_struct.clock_polarity_phase = SPI_CK_PL_HIGH_PH_1EDGE; + break; + case RT_SPI_MODE_3: + spi_init_struct.clock_polarity_phase = SPI_CK_PL_HIGH_PH_2EDGE; + break; + } + + /* MSB or LSB */ + if(configuration->mode & RT_SPI_MSB) + { + spi_init_struct.endian = SPI_ENDIAN_MSB; + } + else + { + spi_init_struct.endian = SPI_ENDIAN_LSB; + } + + spi_init_struct.trans_mode = SPI_TRANSMODE_FULLDUPLEX; + spi_init_struct.device_mode = SPI_MASTER; + spi_init_struct.nss = SPI_NSS_SOFT; + + spi_init(spi_periph, &spi_init_struct); + + spi_crc_off(spi_periph); + + spi_enable(spi_periph); + + return RT_EOK; +}; + +static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* message) +{ + rt_base_t gd32_cs_pin = (rt_base_t)device->parent.user_data; + rt_uint32_t spi_periph = (rt_uint32_t)device->bus->parent.user_data; + struct rt_spi_configuration * config = &device->config; + + RT_ASSERT(device != NULL); + RT_ASSERT(message != NULL); + + /* take CS */ + if(message->cs_take) + { + rt_pin_write(gd32_cs_pin, PIN_LOW); + DEBUG_PRINTF("spi take cs\n"); + } + + { + if(config->data_width <= 8) + { + const rt_uint8_t * send_ptr = message->send_buf; + rt_uint8_t * recv_ptr = message->recv_buf; + rt_uint32_t size = message->length; + + DEBUG_PRINTF("spi poll transfer start: %d\n", size); + + while(size--) + { + rt_uint8_t data = 0xFF; + + if(send_ptr != RT_NULL) + { + data = *send_ptr++; + } + + // Todo: replace register read/write by gd32f3 lib + //Wait until the transmit buffer is empty + while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_TBE)); + // Send the byte + spi_i2s_data_transmit(spi_periph, data); + + //Wait until a data is received + while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_RBNE)); + // Get the received data + data = spi_i2s_data_receive(spi_periph); + + if(recv_ptr != RT_NULL) + { + *recv_ptr++ = data; + } + } + DEBUG_PRINTF("spi poll transfer finsh\n"); + } + else if(config->data_width <= 16) + { + const rt_uint16_t * send_ptr = message->send_buf; + rt_uint16_t * recv_ptr = message->recv_buf; + rt_uint32_t size = message->length; + + while(size--) + { + rt_uint16_t data = 0xFF; + + if(send_ptr != RT_NULL) + { + data = *send_ptr++; + } + + //Wait until the transmit buffer is empty + while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_TBE)); + // Send the byte + spi_i2s_data_transmit(spi_periph, data); + + //Wait until a data is received + while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_RBNE)); + // Get the received data + data = spi_i2s_data_receive(spi_periph); + + if(recv_ptr != RT_NULL) + { + *recv_ptr++ = data; + } + } + } + } + + /* release CS */ + if(message->cs_release) + { + rt_pin_write(gd32_cs_pin, PIN_HIGH); + DEBUG_PRINTF("spi release cs\n"); + } + + return message->length; +}; + +int gd32_hw_spi_init(void) +{ + int result = 0; +#ifdef RT_USING_SPI0 + static struct rt_spi_bus spi_bus0; + spi_bus0.parent.user_data = (void *)SPI0; + + result = rt_spi_bus_register(&spi_bus0, "spi0", &gd32_spi_ops); + + rcu_periph_clock_enable(RCU_GPIOA); + rcu_periph_clock_enable(RCU_SPI0); + /* SPI0_SCK(PA5), SPI0_MISO(PA6) and SPI0_MOSI(PA7) GPIO pin configuration */ + gpio_init(GPIOA, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_5 | GPIO_PIN_7); + gpio_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_6); + +#endif +#ifdef RT_USING_SPI1 + static struct rt_spi_bus spi_bus1; + spi_bus1.parent.user_data = (void *)SPI1; + + result = rt_spi_bus_register(&spi_bus1, "spi1", &gd32_spi_ops); + + rcu_periph_clock_enable(RCU_SPI1); + rcu_periph_clock_enable(RCU_GPIOB); + + /* SPI1_SCK(PB13), SPI1_MISO(PB14) and SPI1_MOSI(PB15) GPIO pin configuration */ + gpio_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_13 | GPIO_PIN_15); + gpio_init(GPIOB, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_14); +#endif +#ifdef RT_USING_SPI2 + static struct rt_spi_bus spi_bus2; + spi_bus2.parent.user_data = (void *)SPI2; + + result = rt_spi_bus_register(&spi_bus2, "spi2", &gd32_spi_ops); + + rcu_periph_clock_enable(RCU_SPI2); + rcu_periph_clock_enable(RCU_GPIOB); + + /* SPI2_SCK(PB3), SPI2_MISO(PB4) and SPI2_MOSI(PB5) GPIO pin configuration */ + gpio_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_3 | GPIO_PIN_5); + gpio_init(GPIOB, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_4); +#endif + return result; +} +INIT_BOARD_EXPORT(gd32_hw_spi_init); +#endif diff --git a/bsp/gd32105c-eval/drivers/drv_spi.h b/bsp/gd32105c-eval/drivers/drv_spi.h new file mode 100644 index 0000000000000000000000000000000000000000..d1081cbde1c643d42ba7ecff607bfb33b596e62e --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_spi.h @@ -0,0 +1,15 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +#ifndef gd32F30X_SPI_H_INCLUDED +#define gd32F30X_SPI_H_INCLUDED + + +#endif // gd32F30X_SPI_H_INCLUDED diff --git a/bsp/gd32105c-eval/drivers/drv_spi_flash.c b/bsp/gd32105c-eval/drivers/drv_spi_flash.c new file mode 100644 index 0000000000000000000000000000000000000000..59f35f1d27dc11df0cb5b56f5cdc29f854a01237 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_spi_flash.c @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ +#include +#include +#include +#include "spi_flash.h" +#include "spi_flash_sfud.h" + +#define SPI_BUS_NAME "spi0" +#define SPI_DEVICE_NAME "spi01" +#define SPI_FLASH_DEVICE_NAME "gd25q" +#define GD25Q_SPI_CS_PIN 67 //PE3，在 drv_gpio.c 文件 pin_index pins[]中查到 PE3 编号为 2 + +static int rt_hw_gd25q40_init(void) +{ + rt_err_t res; + static struct rt_spi_device spi_dev_gd25q; /* SPI设备对象 */ + static rt_base_t gd25q_cs_pin; /* SPI设备CS片选引脚 */ + + gd25q_cs_pin = GD25Q_SPI_CS_PIN; + + rt_pin_mode(GD25Q_SPI_CS_PIN, GPIO_MODE_OUT_PP); + + res = rt_spi_bus_attach_device(&spi_dev_gd25q, SPI_DEVICE_NAME, SPI_BUS_NAME, (void*)gd25q_cs_pin); + if (res != RT_EOK) + { + rt_kprintf("rt_spi_bus_attach_device() run failed!\n"); + return res; + } + + return RT_EOK; +} +INIT_DEVICE_EXPORT(rt_hw_gd25q40_init); + +static int rt_hw_spi_flash_with_sfud_init(void) +{ + if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_DEVICE_NAME, SPI_DEVICE_NAME)) + { + return RT_ERROR; + } + + return RT_EOK; +} +INIT_COMPONENT_EXPORT(rt_hw_spi_flash_with_sfud_init); + +#ifdef RT_USING_DFS +#include + +int mnt_init(void) +{ + if (dfs_mount(SPI_FLASH_DEVICE_NAME, "/", "elm", 0, 0) == 0) + { + rt_kprintf("spi flash mount success !\n"); + } + else + { + rt_kprintf("spi flash mount failed!\n"); + } + + return 0; +} +MSH_CMD_EXPORT(mnt_init, mount spi flash to file system); +#endif diff --git a/bsp/gd32105c-eval/drivers/drv_usart.c b/bsp/gd32105c-eval/drivers/drv_usart.c new file mode 100644 index 0000000000000000000000000000000000000000..6dbe467ab8deda78b3a81cbbb4edf6b869a29fc5 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_usart.c @@ -0,0 +1,374 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ +#include +#include +#include +#include + +#ifdef RT_USING_SERIAL + +#define UART_ENABLE_IRQ(n) NVIC_EnableIRQ((n)) +#define UART_DISABLE_IRQ(n) NVIC_DisableIRQ((n)) + +#if !defined(RT_USING_USART0) && !defined(RT_USING_USART1) && \ + !defined(RT_USING_USART2) && !defined(RT_USING_UART3) && \ + !defined(RT_USING_UART4) +#error "Please define at least one UARTx" + +#endif + +#include + +/* GD32 uart driver */ +/* Todo: compress uart info */ +struct gd32_uart +{ + uint32_t uart_periph; + IRQn_Type irqn; + rcu_periph_enum per_clk; + rcu_periph_enum tx_gpio_clk; + rcu_periph_enum rx_gpio_clk; + uint32_t tx_port; + uint16_t tx_pin; + uint32_t rx_port; + uint16_t rx_pin; + + struct rt_serial_device * serial; + char *device_name; +}; + +static void uart_isr(struct rt_serial_device *serial); + +#if defined(RT_USING_USART0) +struct rt_serial_device serial0; + +void USART0_IRQHandler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + uart_isr(&serial0); + + /* leave interrupt */ + rt_interrupt_leave(); +} + +#endif /* RT_USING_USART0 */ + +#if defined(RT_USING_USART1) +struct rt_serial_device serial1; + +void USART1_IRQHandler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + uart_isr(&serial1); + + /* leave interrupt */ + rt_interrupt_leave(); +} + +#endif /* RT_USING_UART1 */ + +#if defined(RT_USING_USART2) +struct rt_serial_device serial2; + +void USART2_IRQHandler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + uart_isr(&serial2); + + /* leave interrupt */ + rt_interrupt_leave(); +} + +#endif /* RT_USING_UART2 */ + +#if defined(RT_USING_UART3) +struct rt_serial_device serial3; + +void UART3_IRQHandler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + uart_isr(&serial3); + + /* leave interrupt */ + rt_interrupt_leave(); +} + +#endif /* RT_USING_UART3 */ + +#if defined(RT_USING_UART4) +struct rt_serial_device serial4; + +void UART4_IRQHandler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + uart_isr(&serial4); + + /* leave interrupt */ + rt_interrupt_leave(); +} +#endif /* RT_USING_UART4 */ + +static const struct gd32_uart uarts[] = { + #ifdef RT_USING_USART0 + { + USART0, /* uart peripheral index */ + USART0_IRQn, /* uart iqrn */ + RCU_USART0, RCU_GPIOA, RCU_GPIOA, /* periph clock, tx gpio clock, rt gpio clock */ + GPIOA, GPIO_PIN_9, /* tx port, tx pin */ + GPIOA, GPIO_PIN_10, /* rx port, rx pin */ + &serial0, + "uart0", + }, + #endif + + #ifdef RT_USING_USART1 + { + USART1, /* uart peripheral index */ + USART1_IRQn, /* uart iqrn */ + RCU_USART1, RCU_GPIOA, RCU_GPIOA, /* periph clock, tx gpio clock, rt gpio clock */ + GPIOA, GPIO_PIN_2, /* tx port, tx pin */ + GPIOA, GPIO_PIN_3, /* rx port, rx pin */ + &serial1, + "uart1", + }, + #endif + + #ifdef RT_USING_USART2 + { + USART2, /* uart peripheral index */ + USART2_IRQn, /* uart iqrn */ + RCU_USART2, RCU_GPIOB, RCU_GPIOB, /* periph clock, tx gpio clock, rt gpio clock */ + GPIOB, GPIO_PIN_10, /* tx port, tx alternate, tx pin */ + GPIOB, GPIO_PIN_11, /* rx port, rx alternate, rx pin */ + &serial2, + "uart2", + }, + #endif + + #ifdef RT_USING_UART3 + { + UART3, /* uart peripheral index */ + UART3_IRQn, /* uart iqrn */ + RCU_UART3, RCU_GPIOC, RCU_GPIOC, /* periph clock, tx gpio clock, rt gpio clock */ + GPIOC, GPIO_PIN_10, /* tx port, tx alternate, tx pin */ + GPIOC, GPIO_PIN_11, /* rx port, rx alternate, rx pin */ + &serial3, + "uart3", + }, + #endif + + #ifdef RT_USING_UART4 + { + UART4, /* uart peripheral index */ + UART4_IRQn, /* uart iqrn */ + RCU_UART4, RCU_GPIOC, RCU_GPIOD, /* periph clock, tx gpio clock, rt gpio clock */ + GPIOC, GPIO_PIN_12, /* tx port, tx alternate, tx pin */ + GPIOD, GPIO_PIN_2, /* rx port, rx alternate, rx pin */ + &serial4, + "uart4", + }, + #endif +}; + + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example: +* - Peripheral's clock enable +* - Peripheral's GPIO Configuration +* - NVIC configuration for UART interrupt request enable +* @param uart: UART handle pointer +* @retval None +*/ +void gd32_uart_gpio_init(struct gd32_uart *uart) +{ + /* enable USART clock */ + rcu_periph_clock_enable(uart->tx_gpio_clk); + rcu_periph_clock_enable(uart->rx_gpio_clk); + rcu_periph_clock_enable(uart->per_clk); + + /* connect port to USARTx_Tx */ + gpio_init(uart->tx_port, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, uart->tx_pin); + + /* connect port to USARTx_Rx */ + gpio_init(uart->rx_port, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, uart->rx_pin); + + NVIC_SetPriority(uart->irqn, 0); + NVIC_EnableIRQ(uart->irqn); +} + +static rt_err_t _uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg) +{ + struct gd32_uart *uart; + + RT_ASSERT(serial != RT_NULL); + RT_ASSERT(cfg != RT_NULL); + + uart = (struct gd32_uart *)serial->parent.user_data; + + gd32_uart_gpio_init(uart); + + usart_baudrate_set(uart->uart_periph, cfg->baud_rate); + + switch (cfg->data_bits) + { + case DATA_BITS_9: + usart_word_length_set(uart->uart_periph, USART_WL_9BIT); + break; + + default: + usart_word_length_set(uart->uart_periph, USART_WL_8BIT); + break; + } + + switch (cfg->stop_bits) + { + case STOP_BITS_2: + usart_stop_bit_set(uart->uart_periph, USART_STB_2BIT); + break; + default: + usart_stop_bit_set(uart->uart_periph, USART_STB_1BIT); + break; + } + + switch (cfg->parity) + { + case PARITY_ODD: + usart_parity_config(uart->uart_periph, USART_PM_ODD); + break; + case PARITY_EVEN: + usart_parity_config(uart->uart_periph, USART_PM_EVEN); + break; + default: + usart_parity_config(uart->uart_periph, USART_PM_NONE); + break; + } + + usart_receive_config(uart->uart_periph, USART_RECEIVE_ENABLE); + usart_transmit_config(uart->uart_periph, USART_TRANSMIT_ENABLE); + usart_enable(uart->uart_periph); + + return RT_EOK; +} + +static rt_err_t _uart_control(struct rt_serial_device *serial, int cmd, void *arg) +{ + struct gd32_uart *uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct gd32_uart *)serial->parent.user_data; + + switch (cmd) + { + case RT_DEVICE_CTRL_CLR_INT: + /* disable rx irq */ + NVIC_DisableIRQ(uart->irqn); + /* disable interrupt */ + usart_interrupt_disable(uart->uart_periph, USART_INT_RBNE); + + break; + case RT_DEVICE_CTRL_SET_INT: + /* enable rx irq */ + NVIC_EnableIRQ(uart->irqn); + /* enable interrupt */ + usart_interrupt_enable(uart->uart_periph, USART_INT_RBNE); + break; + } + + return RT_EOK; +} + +static int _uart_putc(struct rt_serial_device *serial, char ch) +{ + struct gd32_uart *uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct gd32_uart *)serial->parent.user_data; + + usart_data_transmit(uart->uart_periph, ch); + while((usart_flag_get(uart->uart_periph, USART_FLAG_TC) == RESET)); + + return 1; +} + +static int _uart_getc(struct rt_serial_device *serial) +{ + int ch; + struct gd32_uart *uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct gd32_uart *)serial->parent.user_data; + + ch = -1; + if (usart_flag_get(uart->uart_periph, USART_FLAG_RBNE) != RESET) + ch = usart_data_receive(uart->uart_periph); + return ch; +} + +/** + * Uart common interrupt process. This need add to uart ISR. + * + * @param serial serial device + */ +static void uart_isr(struct rt_serial_device *serial) +{ + struct gd32_uart *uart = (struct gd32_uart *) serial->parent.user_data; + + RT_ASSERT(uart != RT_NULL); + + /* UART in mode Receiver */ + if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_RBNE) != RESET) && + (usart_flag_get(uart->uart_periph, USART_FLAG_RBNE) != RESET)) + { + rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND); + /* Clear RXNE interrupt flag */ + usart_flag_clear(uart->uart_periph, USART_FLAG_RBNE); + } +} + +static const struct rt_uart_ops gd32_uart_ops = +{ + _uart_configure, + _uart_control, + _uart_putc, + _uart_getc +}; + +int gd32_hw_usart_init(void) +{ + struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT; + int i; + + for (i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++) + { + uarts[i].serial->ops = &gd32_uart_ops; + uarts[i].serial->config = config; + + /* register UART device */ + rt_hw_serial_register(uarts[i].serial, + uarts[i].device_name, + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, + (void *)&uarts[i]); + } + + return 0; +} +INIT_BOARD_EXPORT(gd32_hw_usart_init); +#endif diff --git a/bsp/gd32105c-eval/drivers/drv_usart.h b/bsp/gd32105c-eval/drivers/drv_usart.h new file mode 100644 index 0000000000000000000000000000000000000000..f575ad38102778e771458fd96d8aabae1796ce27 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/drv_usart.h @@ -0,0 +1,15 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-08-23 lianzhian first implementation. + */ + +#ifndef __USART_H__ +#define __USART_H__ + + +#endif diff --git a/bsp/gd32105c-eval/drivers/gd32f10x_libopt.h b/bsp/gd32105c-eval/drivers/gd32f10x_libopt.h new file mode 100644 index 0000000000000000000000000000000000000000..a4dd11b0175de3d6792c85aed0d2cf727a2bfbd7 --- /dev/null +++ b/bsp/gd32105c-eval/drivers/gd32f10x_libopt.h @@ -0,0 +1,67 @@ +/*! + \file gd32f10x_libopt.h + \brief library optional for gd32f10x + \version 2014-12-26, V1.0.0, demo for GD32F10x + \version 2017-06-30, V2.0.0, demo for GD32F10x + \version 2018-07-31, V2.1.0, demo for GD32F10x +*/ + +/* + Copyright (c) 2018, GigaDevice Semiconductor Inc. + + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +#ifndef GD32F10X_LIBOPT_H +#define GD32F10X_LIBOPT_H + +#include "gd32f10x_rcu.h" +#include "gd32f10x_adc.h" +#include "gd32f10x_can.h" +#include "gd32f10x_crc.h" +#include "gd32f10x_dac.h" +#include "gd32f10x_dbg.h" +#include "gd32f10x_dma.h" +#include "gd32f10x_exti.h" +#include "gd32f10x_fmc.h" +#include "gd32f10x_fwdgt.h" +#include "gd32f10x_gpio.h" +#include "gd32f10x_i2c.h" +#include "gd32f10x_pmu.h" +#include "gd32f10x_bkp.h" +#include "gd32f10x_rtc.h" +#include "gd32f10x_sdio.h" +#include "gd32f10x_spi.h" +#include "gd32f10x_timer.h" +#include "gd32f10x_usart.h" +#include "gd32f10x_wwdgt.h" +#include "gd32f10x_misc.h" +#include "gd32f10x_exmc.h" +#ifdef GD32F10X_CL +#include "gd32f10x_enet.h" +#endif /* GD32F10X_CL */ + +#endif /* GD32F10X_LIBOPT_H */ diff --git a/bsp/gd32105c-eval/gd32_rom.icf b/bsp/gd32105c-eval/gd32_rom.icf new file mode 100644 index 0000000000000000000000000000000000000000..d6665c3649fc1b5fe92d25e3d24cc59d8b888942 --- /dev/null +++ b/bsp/gd32105c-eval/gd32_rom.icf @@ -0,0 +1,40 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0807ffff; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x2000; +define symbol __ICFEDIT_size_heap__ = 0x2000; +/**** End of ICF editor section. ###ICF###*/ + +export symbol __ICFEDIT_region_RAM_end__; + +define symbol __region_RAM1_start__ = 0x10000000; +define symbol __region_RAM1_end__ = 0x1000FFFF; + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region RAM1_region = mem:[from __region_RAM1_start__ to __region_RAM1_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section FSymTab }; +keep { section VSymTab }; +keep { section .rti_fn* }; +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; +place in RAM1_region { section .sram }; \ No newline at end of file diff --git a/bsp/gd32105c-eval/gd32_rom.ld b/bsp/gd32105c-eval/gd32_rom.ld new file mode 100644 index 0000000000000000000000000000000000000000..4af47d1dcb21e093ca83294520d077ad870045f7 --- /dev/null +++ b/bsp/gd32105c-eval/gd32_rom.ld @@ -0,0 +1,142 @@ +/* + * linker script for GD32F30x with GNU ld + * bernard.xiong 2009-10-14 + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + CODE (rx) : ORIGIN = 0x08000000, LENGTH = 256k /* 512KB flash */ + DATA (rw) : ORIGIN = 0x20000000, LENGTH = 96k /* 64KB sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x200; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + . = ALIGN(4); + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + . = ALIGN(4); + + . = ALIGN(4); + _etext = .; + } > CODE = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > CODE + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >DATA + + .stack : + { + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >DATA + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > DATA + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/gd32105c-eval/gd32_rom.sct b/bsp/gd32105c-eval/gd32_rom.sct new file mode 100644 index 0000000000000000000000000000000000000000..b3144a70e059f76ae1d235b7ee8963dc0dbdb8dd --- /dev/null +++ b/bsp/gd32105c-eval/gd32_rom.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x000040000 { ; load region size_region + ER_IROM1 0x08000000 0x000040000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x20000000 0x00018000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/gd32105c-eval/list/context_rvds.lst b/bsp/gd32105c-eval/list/context_rvds.lst new file mode 100644 index 0000000000000000000000000000000000000000..0049e2543b7857c033f08c16d711ff21bbe7beee --- /dev/null +++ b/bsp/gd32105c-eval/list/context_rvds.lst @@ -0,0 +1,515 @@ + + + +ARM Macro Assembler Page 1 + + + 1 00000000 ;/* + 2 00000000 ; * Copyright (c) 2006-2018, RT-Thread Development Team + 3 00000000 ; * + 4 00000000 ; * SPDX-License-Identifier: Apache-2.0 + 5 00000000 ; * + 6 00000000 ; * Change Logs: + 7 00000000 ; * Date Author Notes + 8 00000000 ; * 2009-01-17 Bernard first version + 9 00000000 ; * 2013-06-18 aozima add restore MSP feature. + + 10 00000000 ; * 2013-07-09 aozima enhancement hard fault e + xception handler. + 11 00000000 ; */ + 12 00000000 + 13 00000000 ;/** + 14 00000000 ; * @addtogroup CORTEX-M3 + 15 00000000 ; */ + 16 00000000 ;/*@{*/ + 17 00000000 + 18 00000000 E000ED08 + SCB_VTOR + EQU 0xE000ED08 ; Vector Table Offs + et Register + 19 00000000 E000ED04 + NVIC_INT_CTRL + EQU 0xE000ED04 ; interrupt control + state register + 20 00000000 E000ED20 + NVIC_SYSPRI2 + EQU 0xE000ED20 ; system priority r + egister (2) + 21 00000000 FFFF0000 + NVIC_PENDSV_PRI + EQU 0xFFFF0000 ; PendSV and SysTic + k priority value (l + owest) + 22 00000000 10000000 + NVIC_PENDSVSET + EQU 0x10000000 ; value to trigger + PendSV exception + 23 00000000 + 24 00000000 AREA |.text|, CODE, READONLY, ALIGN= +2 + 25 00000000 THUMB + 26 00000000 REQUIRE8 + 27 00000000 PRESERVE8 + 28 00000000 + 29 00000000 IMPORT rt_thread_switch_interrupt_flag + 30 00000000 IMPORT rt_interrupt_from_thread + 31 00000000 IMPORT rt_interrupt_to_thread + 32 00000000 + 33 00000000 ;/* + 34 00000000 ; * rt_base_t rt_hw_interrupt_disable(); + 35 00000000 ; */ + 36 00000000 rt_hw_interrupt_disable + PROC + 37 00000000 EXPORT rt_hw_interrupt_disable + 38 00000000 F3EF 8010 MRS r0, PRIMASK + 39 00000004 B672 CPSID I + + + +ARM Macro Assembler Page 2 + + + 40 00000006 4770 BX LR + 41 00000008 ENDP + 42 00000008 + 43 00000008 ;/* + 44 00000008 ; * void rt_hw_interrupt_enable(rt_base_t level); + 45 00000008 ; */ + 46 00000008 rt_hw_interrupt_enable + PROC + 47 00000008 EXPORT rt_hw_interrupt_enable + 48 00000008 F380 8810 MSR PRIMASK, r0 + 49 0000000C 4770 BX LR + 50 0000000E ENDP + 51 0000000E + 52 0000000E ;/* + 53 0000000E ; * void rt_hw_context_switch(rt_uint32 from, rt_uint32 + to); + 54 0000000E ; * r0 --> from + 55 0000000E ; * r1 --> to + 56 0000000E ; */ + 57 0000000E rt_hw_context_switch_interrupt + 58 0000000E EXPORT rt_hw_context_switch_interrupt + 59 0000000E rt_hw_context_switch + PROC + 60 0000000E EXPORT rt_hw_context_switch + 61 0000000E + 62 0000000E ; set rt_thread_switch_interrupt_flag to 1 + 63 0000000E 4A32 LDR r2, =rt_thread_switch_interrupt +_flag + 64 00000010 6813 LDR r3, [r2] + 65 00000012 2B01 CMP r3, #1 + 66 00000014 D004 BEQ _reswitch + 67 00000016 F04F 0301 MOV r3, #1 + 68 0000001A 6013 STR r3, [r2] + 69 0000001C + 70 0000001C 4A2F LDR r2, =rt_interrupt_from_thread ; + set rt_interrupt_f + rom_thread + 71 0000001E 6010 STR r0, [r2] + 72 00000020 + 73 00000020 _reswitch + 74 00000020 4A2F LDR r2, =rt_interrupt_to_thread ; s + et rt_interrupt_to_ + thread + 75 00000022 6011 STR r1, [r2] + 76 00000024 + 77 00000024 482F LDR r0, =NVIC_INT_CTRL ; trigger th + e PendSV exception + (causes context swi + tch) + 78 00000026 F04F 5180 LDR r1, =NVIC_PENDSVSET + 79 0000002A 6001 STR r1, [r0] + 80 0000002C 4770 BX LR + 81 0000002E ENDP + 82 0000002E + 83 0000002E ; r0 --> switch from thread stack + 84 0000002E ; r1 --> switch to thread stack + 85 0000002E ; psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from + ] stack + 86 0000002E PendSV_Handler + + + +ARM Macro Assembler Page 3 + + + PROC + 87 0000002E EXPORT PendSV_Handler + 88 0000002E + 89 0000002E ; disable interrupt to protect context switch + 90 0000002E F3EF 8210 MRS r2, PRIMASK + 91 00000032 B672 CPSID I + 92 00000034 + 93 00000034 ; get rt_thread_switch_interrupt_flag + 94 00000034 4828 LDR r0, =rt_thread_switch_interrupt +_flag + 95 00000036 6801 LDR r1, [r0] + 96 00000038 B191 CBZ r1, pendsv_exit ; pendsv alread + y handled + 97 0000003A + 98 0000003A ; clear rt_thread_switch_interrupt_flag to 0 + 99 0000003A F04F 0100 MOV r1, #0x00 + 100 0000003E 6001 STR r1, [r0] + 101 00000040 + 102 00000040 4826 LDR r0, =rt_interrupt_from_thread + 103 00000042 6801 LDR r1, [r0] + 104 00000044 B129 CBZ r1, switch_to_thread ; skip reg + ister save at the f + irst time + 105 00000046 + 106 00000046 F3EF 8109 MRS r1, psp ; get from thread s + tack pointer + 107 0000004A E921 0FF0 STMFD r1!, {r4 - r11} ; push r4 - r11 + register + 108 0000004E 6800 LDR r0, [r0] + 109 00000050 6001 STR r1, [r0] ; update from threa + d stack pointer + 110 00000052 + 111 00000052 switch_to_thread + 112 00000052 4923 LDR r1, =rt_interrupt_to_thread + 113 00000054 6809 LDR r1, [r1] + 114 00000056 6809 LDR r1, [r1] ; load thread stack + pointer + 115 00000058 + 116 00000058 E8B1 0FF0 LDMFD r1!, {r4 - r11} ; pop r4 - r11 + register + 117 0000005C F381 8809 MSR psp, r1 ; update stack poin + ter + 118 00000060 + 119 00000060 pendsv_exit + 120 00000060 ; restore interrupt + 121 00000060 F382 8810 MSR PRIMASK, r2 + 122 00000064 + 123 00000064 F04E 0E04 ORR lr, lr, #0x04 + 124 00000068 4770 BX lr + 125 0000006A ENDP + 126 0000006A + 127 0000006A ;/* + 128 0000006A ; * void rt_hw_context_switch_to(rt_uint32 to); + 129 0000006A ; * r0 --> to + 130 0000006A ; * this fucntion is used to perform the first thread sw + itch + 131 0000006A ; */ + 132 0000006A rt_hw_context_switch_to + PROC + + + +ARM Macro Assembler Page 4 + + + 133 0000006A EXPORT rt_hw_context_switch_to + 134 0000006A ; set to thread + 135 0000006A 491D LDR r1, =rt_interrupt_to_thread + 136 0000006C 6008 STR r0, [r1] + 137 0000006E + 138 0000006E ; set from thread to 0 + 139 0000006E 491B LDR r1, =rt_interrupt_from_thread + 140 00000070 F04F 0000 MOV r0, #0x0 + 141 00000074 6008 STR r0, [r1] + 142 00000076 + 143 00000076 ; set interrupt flag to 1 + 144 00000076 4918 LDR r1, =rt_thread_switch_interrupt +_flag + 145 00000078 F04F 0001 MOV r0, #1 + 146 0000007C 6008 STR r0, [r1] + 147 0000007E + 148 0000007E ; set the PendSV and SysTick exception priority + 149 0000007E 481A LDR r0, =NVIC_SYSPRI2 + 150 00000080 491A LDR r1, =NVIC_PENDSV_PRI + 151 00000082 F8D0 2000 LDR.W r2, [r0,#0x00] ; read + 152 00000086 EA41 0102 ORR r1,r1,r2 ; modify + 153 0000008A 6001 STR r1, [r0] ; write-back + 154 0000008C + 155 0000008C ; trigger the PendSV exception (causes context switch) + 156 0000008C 4815 LDR r0, =NVIC_INT_CTRL + 157 0000008E F04F 5180 LDR r1, =NVIC_PENDSVSET + 158 00000092 6001 STR r1, [r0] + 159 00000094 + 160 00000094 ; restore MSP + 161 00000094 4816 LDR r0, =SCB_VTOR + 162 00000096 6800 LDR r0, [r0] + 163 00000098 6800 LDR r0, [r0] + 164 0000009A F380 8808 MSR msp, r0 + 165 0000009E + 166 0000009E ; enable interrupts at processor level + 167 0000009E B661 CPSIE F + 168 000000A0 B662 CPSIE I + 169 000000A2 + 170 000000A2 ; never reach here! + 171 000000A2 ENDP + 172 000000A2 + 173 000000A2 ; compatible with old version + 174 000000A2 rt_hw_interrupt_thread_switch + PROC + 175 000000A2 EXPORT rt_hw_interrupt_thread_switch + 176 000000A2 4770 BX lr + 177 000000A4 ENDP + 178 000000A4 + 179 000000A4 IMPORT rt_hw_hard_fault_exception + 180 000000A4 EXPORT HardFault_Handler + 181 000000A4 HardFault_Handler + PROC + 182 000000A4 + 183 000000A4 ; get current context + 184 000000A4 F01E 0F04 TST lr, #0x04 ; if(!EXC_RETURN[2] + ) + 185 000000A8 BF0C ITE EQ + 186 000000AA F3EF 8008 MRSEQ r0, msp ; [2]=0 ==> Z=1, ge + t fault context fro + + + +ARM Macro Assembler Page 5 + + + m handler. + 187 000000AE F3EF 8009 MRSNE r0, psp ; [2]=1 ==> Z=0, ge + t fault context fro + m thread. + 188 000000B2 + 189 000000B2 E920 0FF0 STMFD r0!, {r4 - r11} ; push r4 - r11 + register + 190 000000B6 F840 ED04 STMFD r0!, {lr} ; push exec_return + register + 191 000000BA + 192 000000BA F01E 0F04 TST lr, #0x04 ; if(!EXC_RETURN[2] + ) + 193 000000BE BF0C ITE EQ + 194 000000C0 F380 8808 MSREQ msp, r0 ; [2]=0 ==> Z=1, up + date stack pointer + to MSP. + 195 000000C4 F380 8809 MSRNE psp, r0 ; [2]=1 ==> Z=0, up + date stack pointer + to PSP. + 196 000000C8 + 197 000000C8 B500 PUSH {lr} + 198 000000CA F7FF FFFE BL rt_hw_hard_fault_exception + 199 000000CE F85D EB04 POP {lr} + 200 000000D2 + 201 000000D2 F04E 0E04 ORR lr, lr, #0x04 + 202 000000D6 4770 BX lr + 203 000000D8 ENDP + 204 000000D8 + 205 000000D8 ALIGN 4 + 206 000000D8 + 207 000000D8 END + 00000000 + 00000000 + 00000000 + E000ED04 + E000ED20 + FFFF0000 + E000ED08 +Command Line: --debug --xref --diag_suppress=9931 --cpu=Cortex-M3 --apcs=interw +ork --depend=.\output\context_rvds.d -o.\output\context_rvds.o -IE:\code\rtt\rt +-thread\bsp\gd32105c-eval\RTE -ID:\Keil_v5\ARM\PACK\GigaDevice\GD32F10x_DFP\2.0 +.1\Device\Include -ID:\Keil_v5\ARM\CMSIS\Include --predefine="__MICROLIB SETA 1 +" --predefine="__UVISION_VERSION SETA 514" --predefine="GD32F10X_CL SETA 1" --p +redefine="USE_STDPERIPH_DRIVER SETA 1" --list=.\list\context_rvds.lst ..\..\lib +cpu\arm\cortex-m3\context_rvds.S + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +.text 00000000 + +Symbol: .text + Definitions + At line 24 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + None +Comment: .text unused +HardFault_Handler 000000A4 + +Symbol: HardFault_Handler + Definitions + At line 181 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 180 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: HardFault_Handler used once +PendSV_Handler 0000002E + +Symbol: PendSV_Handler + Definitions + At line 86 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 87 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: PendSV_Handler used once +_reswitch 00000020 + +Symbol: _reswitch + Definitions + At line 73 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 66 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: _reswitch used once +pendsv_exit 00000060 + +Symbol: pendsv_exit + Definitions + At line 119 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 96 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: pendsv_exit used once +rt_hw_context_switch 0000000E + +Symbol: rt_hw_context_switch + Definitions + At line 59 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 60 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: rt_hw_context_switch used once +rt_hw_context_switch_interrupt 0000000E + +Symbol: rt_hw_context_switch_interrupt + Definitions + At line 57 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 58 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: rt_hw_context_switch_interrupt used once +rt_hw_context_switch_to 0000006A + +Symbol: rt_hw_context_switch_to + + + +ARM Macro Assembler Page 2 Alphabetic symbol ordering +Relocatable symbols + + Definitions + At line 132 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 133 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: rt_hw_context_switch_to used once +rt_hw_interrupt_disable 00000000 + +Symbol: rt_hw_interrupt_disable + Definitions + At line 36 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 37 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: rt_hw_interrupt_disable used once +rt_hw_interrupt_enable 00000008 + +Symbol: rt_hw_interrupt_enable + Definitions + At line 46 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 47 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: rt_hw_interrupt_enable used once +rt_hw_interrupt_thread_switch 000000A2 + +Symbol: rt_hw_interrupt_thread_switch + Definitions + At line 174 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 175 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: rt_hw_interrupt_thread_switch used once +switch_to_thread 00000052 + +Symbol: switch_to_thread + Definitions + At line 111 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 104 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: switch_to_thread used once +12 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Absolute symbols + +NVIC_INT_CTRL E000ED04 + +Symbol: NVIC_INT_CTRL + Definitions + At line 19 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 77 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 156 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + +NVIC_PENDSVSET 10000000 + +Symbol: NVIC_PENDSVSET + Definitions + At line 22 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 78 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 157 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + +NVIC_PENDSV_PRI FFFF0000 + +Symbol: NVIC_PENDSV_PRI + Definitions + At line 21 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 150 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: NVIC_PENDSV_PRI used once +NVIC_SYSPRI2 E000ED20 + +Symbol: NVIC_SYSPRI2 + Definitions + At line 20 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 149 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: NVIC_SYSPRI2 used once +SCB_VTOR E000ED08 + +Symbol: SCB_VTOR + Definitions + At line 18 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 161 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: SCB_VTOR used once +5 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +External symbols + +rt_hw_hard_fault_exception 00000000 + +Symbol: rt_hw_hard_fault_exception + Definitions + At line 179 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 198 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S +Comment: rt_hw_hard_fault_exception used once +rt_interrupt_from_thread 00000000 + +Symbol: rt_interrupt_from_thread + Definitions + At line 30 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 70 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 102 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 139 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + +rt_interrupt_to_thread 00000000 + +Symbol: rt_interrupt_to_thread + Definitions + At line 31 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 74 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 112 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 135 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + +rt_thread_switch_interrupt_flag 00000000 + +Symbol: rt_thread_switch_interrupt_flag + Definitions + At line 29 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + Uses + At line 63 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 94 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + At line 144 in file ..\..\libcpu\arm\cortex-m3\context_rvds.S + +4 symbols +357 symbols in table diff --git a/bsp/gd32105c-eval/list/startup_gd32f10x_cl.lst b/bsp/gd32105c-eval/list/startup_gd32f10x_cl.lst new file mode 100644 index 0000000000000000000000000000000000000000..0944b6bb388484dc061f5d7d78a26f75220023d1 --- /dev/null +++ b/bsp/gd32105c-eval/list/startup_gd32f10x_cl.lst @@ -0,0 +1,1850 @@ + + + +ARM Macro Assembler Page 1 + + + 1 00000000 ;/*! + 2 00000000 ; \file startup_gd32f10x_cl.s + 3 00000000 ; \brief start up file + 4 00000000 ; + 5 00000000 ; \version 2014-12-26, V1.0.0, firmware for GD32F10x + 6 00000000 ; \version 2017-06-20, V2.0.0, firmware for GD32F10x + 7 00000000 ; \version 2018-07-31, V2.1.0, firmware for GD32F10x + 8 00000000 ;*/ + 9 00000000 ; + 10 00000000 ;/* + 11 00000000 ; Copyright (c) 2018, GigaDevice Semiconductor Inc. + 12 00000000 ; + 13 00000000 ; All rights reserved. + 14 00000000 ; + 15 00000000 ; Redistribution and use in source and binary forms, + with or without modification, + 16 00000000 ;are permitted provided that the following conditions ar + e met: + 17 00000000 ; + 18 00000000 ; 1. Redistributions of source code must retain the a + bove copyright notice, this + 19 00000000 ; list of conditions and the following disclaimer. + + 20 00000000 ; 2. Redistributions in binary form must reproduce th + e above copyright notice, + 21 00000000 ; this list of conditions and the following discla + imer in the documentation + 22 00000000 ; and/or other materials provided with the distrib + ution. + 23 00000000 ; 3. Neither the name of the copyright holder nor the + names of its contributors + 24 00000000 ; may be used to endorse or promote products deriv + ed from this software without + 25 00000000 ; specific prior written permission. + 26 00000000 ; + 27 00000000 ; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS + AND CONTRIBUTORS "AS IS" + 28 00000000 ;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT N + OT LIMITED TO, THE IMPLIED + 29 00000000 ;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU + LAR PURPOSE ARE DISCLAIMED. + 30 00000000 ;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS + BE LIABLE FOR ANY DIRECT, + 31 00000000 ;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENT + IAL DAMAGES (INCLUDING, BUT + 32 00000000 ;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERV + ICES; LOSS OF USE, DATA, OR + 33 00000000 ;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND O + N ANY THEORY OF LIABILITY, + 34 00000000 ;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDI + NG NEGLIGENCE OR OTHERWISE) + 35 00000000 ;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVE + N IF ADVISED OF THE POSSIBILITY + 36 00000000 ;OF SUCH DAMAGE. + 37 00000000 ;*/ + 38 00000000 + 39 00000000 ; Stack Configuration + 40 00000000 ; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> + 41 00000000 ; + + + +ARM Macro Assembler Page 2 + + + 42 00000000 + 43 00000000 00002000 + Stack_Size + EQU 0x00002000 + 44 00000000 + 45 00000000 AREA STACK, NOINIT, READWRITE, ALIGN + = 3 + 46 00000000 Stack_Mem + SPACE Stack_Size + 47 00002000 __initial_sp + 48 00002000 + 49 00002000 + 50 00002000 ; Heap Configuration + 51 00002000 ; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> + 52 00002000 ; + 53 00002000 + 54 00002000 00002000 + Heap_Size + EQU 0x00002000 + 55 00002000 + 56 00002000 AREA HEAP, NOINIT, READWRITE, ALIGN += 3 + 57 00000000 __heap_base + 58 00000000 Heap_Mem + SPACE Heap_Size + 59 00002000 __heap_limit + 60 00002000 + 61 00002000 + 62 00002000 PRESERVE8 + 63 00002000 THUMB + 64 00002000 + 65 00002000 ; /* reset Vector Mapped to at Address + 0 */ + 66 00002000 AREA RESET, DATA, READONLY + 67 00000000 EXPORT __Vectors + 68 00000000 EXPORT __Vectors_End + 69 00000000 EXPORT __Vectors_Size + 70 00000000 + 71 00000000 00000000 + __Vectors + DCD __initial_sp ; Top of Stack + 72 00000004 00000000 DCD Reset_Handler ; Reset Handler + 73 00000008 00000000 DCD NMI_Handler ; NMI Handler + 74 0000000C 00000000 DCD HardFault_Handler ; Hard Fault + Handler + 75 00000010 00000000 DCD MemManage_Handler + ; MPU Fault Handler + + 76 00000014 00000000 DCD BusFault_Handler + ; Bus Fault Handler + + 77 00000018 00000000 DCD UsageFault_Handler ; Usage Faul + t Handler + 78 0000001C 00000000 DCD 0 ; Reserved + 79 00000020 00000000 DCD 0 ; Reserved + 80 00000024 00000000 DCD 0 ; Reserved + 81 00000028 00000000 DCD 0 ; Reserved + 82 0000002C 00000000 DCD SVC_Handler ; SVCall Handler + 83 00000030 00000000 DCD DebugMon_Handler ; Debug Monito + + + +ARM Macro Assembler Page 3 + + + r Handler + 84 00000034 00000000 DCD 0 ; Reserved + 85 00000038 00000000 DCD PendSV_Handler ; PendSV Handler + + 86 0000003C 00000000 DCD SysTick_Handler + ; SysTick Handler + 87 00000040 + 88 00000040 ; /* external interrupts handler */ + 89 00000040 00000000 DCD WWDGT_IRQHandler ; 16:Window Wa + tchdog Timer + 90 00000044 00000000 DCD LVD_IRQHandler ; 17:LVD through + EXTI Line detect + 91 00000048 00000000 DCD TAMPER_IRQHandler ; 18:Tamper I + nterrupt + 92 0000004C 00000000 DCD RTC_IRQHandler ; 19:RTC through + EXTI Line + 93 00000050 00000000 DCD FMC_IRQHandler ; 20:FMC + 94 00000054 00000000 DCD RCU_IRQHandler ; 21:RCU + 95 00000058 00000000 DCD EXTI0_IRQHandler + ; 22:EXTI Line 0 + 96 0000005C 00000000 DCD EXTI1_IRQHandler + ; 23:EXTI Line 1 + 97 00000060 00000000 DCD EXTI2_IRQHandler + ; 24:EXTI Line 2 + 98 00000064 00000000 DCD EXTI3_IRQHandler + ; 25:EXTI Line 3 + 99 00000068 00000000 DCD EXTI4_IRQHandler + ; 26:EXTI Line 4 + 100 0000006C 00000000 DCD DMA0_Channel0_IRQHandler + ; 27:DMA0 Channel 0 + + 101 00000070 00000000 DCD DMA0_Channel1_IRQHandler + ; 28:DMA0 Channel 1 + + 102 00000074 00000000 DCD DMA0_Channel2_IRQHandler + ; 29:DMA0 Channel 2 + + 103 00000078 00000000 DCD DMA0_Channel3_IRQHandler + ; 30:DMA0 Channel 3 + + 104 0000007C 00000000 DCD DMA0_Channel4_IRQHandler + ; 31:DMA0 Channel 4 + + 105 00000080 00000000 DCD DMA0_Channel5_IRQHandler ; 32:D + MA0 Channel 5 + 106 00000084 00000000 DCD DMA0_Channel6_IRQHandler + ; 33:DMA0 Channel 6 + + 107 00000088 00000000 DCD ADC0_1_IRQHandler + ; 34:ADC0 and ADC1 + 108 0000008C 00000000 DCD CAN0_TX_IRQHandler ; 35:CAN0 TX + + 109 00000090 00000000 DCD CAN0_RX0_IRQHandler + ; 36:CAN0 RX0 + 110 00000094 00000000 DCD CAN0_RX1_IRQHandler + ; 37:CAN0 RX1 + 111 00000098 00000000 DCD CAN0_EWMC_IRQHandler + ; 38:CAN0 EWMC + 112 0000009C 00000000 DCD EXTI5_9_IRQHandler ; 39:EXTI Li + + + +ARM Macro Assembler Page 4 + + + ne 5 to EXTI Line 9 + + 113 000000A0 00000000 DCD TIMER0_BRK_IRQHandler + ; 40:TIMER0 Break + 114 000000A4 00000000 DCD TIMER0_UP_IRQHandler + ; 41:TIMER0 Update + 115 000000A8 00000000 DCD TIMER0_TRG_CMT_IRQHandler ; 42: + TIMER0 Trigger and + Commutation + 116 000000AC 00000000 DCD TIMER0_Channel_IRQHandler ; 43: + TIMER0 Channel Capt + ure Compare + 117 000000B0 00000000 DCD TIMER1_IRQHandler ; 44:TIMER1 + 118 000000B4 00000000 DCD TIMER2_IRQHandler ; 45:TIMER2 + 119 000000B8 00000000 DCD TIMER3_IRQHandler ; 46:TIMER3 + 120 000000BC 00000000 DCD I2C0_EV_IRQHandler + ; 47:I2C0 Event + 121 000000C0 00000000 DCD I2C0_ER_IRQHandler + ; 48:I2C0 Error + 122 000000C4 00000000 DCD I2C1_EV_IRQHandler + ; 49:I2C1 Event + 123 000000C8 00000000 DCD I2C1_ER_IRQHandler + ; 50:I2C1 Error + 124 000000CC 00000000 DCD SPI0_IRQHandler ; 51:SPI0 + 125 000000D0 00000000 DCD SPI1_IRQHandler ; 52:SPI1 + 126 000000D4 00000000 DCD USART0_IRQHandler ; 53:USART0 + 127 000000D8 00000000 DCD USART1_IRQHandler ; 54:USART1 + 128 000000DC 00000000 DCD USART2_IRQHandler ; 55:USART2 + 129 000000E0 00000000 DCD EXTI10_15_IRQHandler ; 56:EXTI + Line 10 to EXTI Lin + e 15 + 130 000000E4 00000000 DCD RTC_Alarm_IRQHandler ; 57:RTC A + larm through EXTI L + ine + 131 000000E8 00000000 DCD USBFS_WKUP_IRQHandler ; 58:USBF + S WakeUp from suspe + nd through EXTI Lin + e + 132 000000EC 00000000 DCD TIMER7_BRK_IRQHandler ; 59:TIME + R7 Break Interrupt + 133 000000F0 00000000 DCD TIMER7_UP_IRQHandler ; 60:TIMER + 7 Update Interrupt + 134 000000F4 00000000 DCD TIMER7_TRG_CMT_IRQHandler + ; 61:TIMER7 Trigger + + 135 000000F8 00000000 DCD TIMER7_Channel_IRQHandler ; 62: + TIMER7 Channel Capt + ure Compare + 136 000000FC 00000000 DCD 0 ; Reserved + 137 00000100 00000000 DCD EXMC_IRQHandler ; 64:EXMC + 138 00000104 00000000 DCD 0 ; Reserved + 139 00000108 00000000 DCD TIMER4_IRQHandler ; 66:TIMER4 + 140 0000010C 00000000 DCD SPI2_IRQHandler ; 67:SPI2 + 141 00000110 00000000 DCD UART3_IRQHandler ; 68:UART3 + 142 00000114 00000000 DCD UART4_IRQHandler ; 69:UART4 + 143 00000118 00000000 DCD TIMER5_IRQHandler ; 70:TIMER5 + 144 0000011C 00000000 DCD TIMER6_IRQHandler ; 71:TIMER6 + 145 00000120 00000000 DCD DMA1_Channel0_IRQHandler + ; 72:DMA1 Channel0 + + + +ARM Macro Assembler Page 5 + + + 146 00000124 00000000 DCD DMA1_Channel1_IRQHandler + ; 73:DMA1 Channel1 + 147 00000128 00000000 DCD DMA1_Channel2_IRQHandler + ; 74:DMA1 Channel2 + 148 0000012C 00000000 DCD DMA1_Channel3_IRQHandler + ; 75:DMA1 Channel3 + 149 00000130 00000000 DCD DMA1_Channel4_IRQHandler + ; 76:DMA1 Channel4 + 150 00000134 00000000 DCD ENET_IRQHandler ; 77:Ethernet + 151 00000138 00000000 DCD ENET_WKUP_IRQHandler ; 78:Ether + net Wakeup through + EXTI line + 152 0000013C 00000000 DCD CAN1_TX_IRQHandler ; 79:CAN1 TX + + 153 00000140 00000000 DCD CAN1_RX0_IRQHandler + ; 80:CAN1 RX0 + 154 00000144 00000000 DCD CAN1_RX1_IRQHandler + ; 81:CAN1 RX1 + 155 00000148 00000000 DCD CAN1_EWMC_IRQHandler + ; 82:CAN1 EWMC + 156 0000014C 00000000 DCD USBFS_IRQHandler ; 83:USBFS + 157 00000150 + 158 00000150 __Vectors_End + 159 00000150 + 160 00000150 00000150 + __Vectors_Size + EQU __Vectors_End - __Vectors + 161 00000150 + 162 00000150 AREA |.text|, CODE, READONLY + 163 00000000 + 164 00000000 ;/* reset Handler */ + 165 00000000 Reset_Handler + PROC + 166 00000000 EXPORT Reset_Handler + [WEAK] + 167 00000000 IMPORT __main + 168 00000000 IMPORT SystemInit + 169 00000000 4806 LDR R0, =SystemInit + 170 00000002 4780 BLX R0 + 171 00000004 4806 LDR R0, =__main + 172 00000006 4700 BX R0 + 173 00000008 ENDP + 174 00000008 + 175 00000008 ;/* dummy Exception Handlers */ + 176 00000008 NMI_Handler + PROC + 177 00000008 EXPORT NMI_Handler + [WEAK] + 178 00000008 E7FE B . + 179 0000000A ENDP + 180 0000000A + 181 0000000A HardFault_Handler + PROC + 182 0000000A EXPORT HardFault_Handler + [WEAK] + 183 0000000A E7FE B . + 184 0000000C ENDP + 185 0000000C + 186 0000000C MemManage_Handler + + + +ARM Macro Assembler Page 6 + + + PROC + 187 0000000C EXPORT MemManage_Handler + [WEAK] + 188 0000000C E7FE B . + 189 0000000E ENDP + 190 0000000E + 191 0000000E BusFault_Handler + PROC + 192 0000000E EXPORT BusFault_Handler + [WEAK] + 193 0000000E E7FE B . + 194 00000010 ENDP + 195 00000010 + 196 00000010 UsageFault_Handler + PROC + 197 00000010 EXPORT UsageFault_Handler + [WEAK] + 198 00000010 E7FE B . + 199 00000012 ENDP + 200 00000012 + 201 00000012 SVC_Handler + PROC + 202 00000012 EXPORT SVC_Handler + [WEAK] + 203 00000012 E7FE B . + 204 00000014 ENDP + 205 00000014 + 206 00000014 DebugMon_Handler + PROC + 207 00000014 EXPORT DebugMon_Handler + [WEAK] + 208 00000014 E7FE B . + 209 00000016 ENDP + 210 00000016 + 211 00000016 PendSV_Handler + PROC + 212 00000016 EXPORT PendSV_Handler + [WEAK] + 213 00000016 E7FE B . + 214 00000018 ENDP + 215 00000018 + 216 00000018 SysTick_Handler + PROC + 217 00000018 EXPORT SysTick_Handler + [WEAK] + 218 00000018 E7FE B . + 219 0000001A ENDP + 220 0000001A + 221 0000001A Default_Handler + PROC + 222 0000001A ; /* external interrupts handler */ + + 223 0000001A EXPORT WWDGT_IRQHandler + [WEAK] + 224 0000001A EXPORT LVD_IRQHandler + [WEAK] + 225 0000001A EXPORT TAMPER_IRQHandler + [WEAK] + 226 0000001A EXPORT RTC_IRQHandler + + + +ARM Macro Assembler Page 7 + + + [WEAK] + 227 0000001A EXPORT FMC_IRQHandler + [WEAK] + 228 0000001A EXPORT RCU_IRQHandler + [WEAK] + 229 0000001A EXPORT EXTI0_IRQHandler + [WEAK] + 230 0000001A EXPORT EXTI1_IRQHandler + [WEAK] + 231 0000001A EXPORT EXTI2_IRQHandler + [WEAK] + 232 0000001A EXPORT EXTI3_IRQHandler + [WEAK] + 233 0000001A EXPORT EXTI4_IRQHandler + [WEAK] + 234 0000001A EXPORT DMA0_Channel0_IRQHandler + [WEAK] + 235 0000001A EXPORT DMA0_Channel1_IRQHandler + [WEAK] + 236 0000001A EXPORT DMA0_Channel2_IRQHandler + [WEAK] + 237 0000001A EXPORT DMA0_Channel3_IRQHandler + [WEAK] + 238 0000001A EXPORT DMA0_Channel4_IRQHandler + [WEAK] + 239 0000001A EXPORT DMA0_Channel5_IRQHandler + [WEAK] + 240 0000001A EXPORT DMA0_Channel6_IRQHandler + [WEAK] + 241 0000001A EXPORT ADC0_1_IRQHandler + [WEAK] + 242 0000001A EXPORT CAN0_TX_IRQHandler + [WEAK] + 243 0000001A EXPORT CAN0_RX0_IRQHandler + [WEAK] + 244 0000001A EXPORT CAN0_RX1_IRQHandler + [WEAK] + 245 0000001A EXPORT CAN0_EWMC_IRQHandler + [WEAK] + 246 0000001A EXPORT EXTI5_9_IRQHandler + [WEAK] + 247 0000001A EXPORT TIMER0_BRK_IRQHandler + [WEAK] + 248 0000001A EXPORT TIMER0_UP_IRQHandler + [WEAK] + 249 0000001A EXPORT TIMER0_TRG_CMT_IRQHandler + [WEAK] + 250 0000001A EXPORT TIMER0_Channel_IRQHandler + [WEAK] + 251 0000001A EXPORT TIMER1_IRQHandler + [WEAK] + 252 0000001A EXPORT TIMER2_IRQHandler + [WEAK] + 253 0000001A EXPORT TIMER3_IRQHandler + [WEAK] + 254 0000001A EXPORT I2C0_EV_IRQHandler + [WEAK] + 255 0000001A EXPORT I2C0_ER_IRQHandler + [WEAK] + + + +ARM Macro Assembler Page 8 + + + 256 0000001A EXPORT I2C1_EV_IRQHandler + [WEAK] + 257 0000001A EXPORT I2C1_ER_IRQHandler + [WEAK] + 258 0000001A EXPORT SPI0_IRQHandler + [WEAK] + 259 0000001A EXPORT SPI1_IRQHandler + [WEAK] + 260 0000001A EXPORT USART0_IRQHandler + [WEAK] + 261 0000001A EXPORT USART1_IRQHandler + [WEAK] + 262 0000001A EXPORT USART2_IRQHandler + [WEAK] + 263 0000001A EXPORT EXTI10_15_IRQHandler + [WEAK] + 264 0000001A EXPORT RTC_Alarm_IRQHandler + [WEAK] + 265 0000001A EXPORT USBFS_WKUP_IRQHandler + [WEAK] + 266 0000001A EXPORT TIMER7_BRK_IRQHandler + [WEAK] + 267 0000001A EXPORT TIMER7_UP_IRQHandler + [WEAK] + 268 0000001A EXPORT TIMER7_TRG_CMT_IRQHandler + [WEAK] + 269 0000001A EXPORT TIMER7_Channel_IRQHandler + [WEAK] + 270 0000001A EXPORT EXMC_IRQHandler + [WEAK] + 271 0000001A EXPORT TIMER4_IRQHandler + [WEAK] + 272 0000001A EXPORT SPI2_IRQHandler + [WEAK] + 273 0000001A EXPORT UART3_IRQHandler + [WEAK] + 274 0000001A EXPORT UART4_IRQHandler + [WEAK] + 275 0000001A EXPORT TIMER5_IRQHandler + [WEAK] + 276 0000001A EXPORT TIMER6_IRQHandler + [WEAK] + 277 0000001A EXPORT DMA1_Channel0_IRQHandler + [WEAK] + 278 0000001A EXPORT DMA1_Channel1_IRQHandler + [WEAK] + 279 0000001A EXPORT DMA1_Channel2_IRQHandler + [WEAK] + 280 0000001A EXPORT DMA1_Channel3_IRQHandler + [WEAK] + 281 0000001A EXPORT DMA1_Channel4_IRQHandler + [WEAK] + 282 0000001A EXPORT ENET_IRQHandler + [WEAK] + 283 0000001A EXPORT ENET_WKUP_IRQHandler + [WEAK] + 284 0000001A EXPORT CAN1_TX_IRQHandler + [WEAK] + 285 0000001A EXPORT CAN1_RX0_IRQHandler + + + +ARM Macro Assembler Page 9 + + + [WEAK] + 286 0000001A EXPORT CAN1_RX1_IRQHandler + [WEAK] + 287 0000001A EXPORT CAN1_EWMC_IRQHandler + [WEAK] + 288 0000001A EXPORT USBFS_IRQHandler + [WEAK] + 289 0000001A + 290 0000001A + 291 0000001A ;/* external interrupts handler */ + 292 0000001A WWDGT_IRQHandler + 293 0000001A LVD_IRQHandler + 294 0000001A TAMPER_IRQHandler + 295 0000001A RTC_IRQHandler + 296 0000001A FMC_IRQHandler + 297 0000001A RCU_IRQHandler + 298 0000001A EXTI0_IRQHandler + 299 0000001A EXTI1_IRQHandler + 300 0000001A EXTI2_IRQHandler + 301 0000001A EXTI3_IRQHandler + 302 0000001A EXTI4_IRQHandler + 303 0000001A DMA0_Channel0_IRQHandler + 304 0000001A DMA0_Channel1_IRQHandler + 305 0000001A DMA0_Channel2_IRQHandler + 306 0000001A DMA0_Channel3_IRQHandler + 307 0000001A DMA0_Channel4_IRQHandler + 308 0000001A DMA0_Channel5_IRQHandler + 309 0000001A DMA0_Channel6_IRQHandler + 310 0000001A ADC0_1_IRQHandler + 311 0000001A CAN0_TX_IRQHandler + 312 0000001A CAN0_RX0_IRQHandler + 313 0000001A CAN0_RX1_IRQHandler + 314 0000001A CAN0_EWMC_IRQHandler + 315 0000001A EXTI5_9_IRQHandler + 316 0000001A TIMER0_BRK_IRQHandler + 317 0000001A TIMER0_UP_IRQHandler + 318 0000001A TIMER0_TRG_CMT_IRQHandler + 319 0000001A TIMER0_Channel_IRQHandler + 320 0000001A TIMER1_IRQHandler + 321 0000001A TIMER2_IRQHandler + 322 0000001A TIMER3_IRQHandler + 323 0000001A I2C0_EV_IRQHandler + 324 0000001A I2C0_ER_IRQHandler + 325 0000001A I2C1_EV_IRQHandler + 326 0000001A I2C1_ER_IRQHandler + 327 0000001A SPI0_IRQHandler + 328 0000001A SPI1_IRQHandler + 329 0000001A USART0_IRQHandler + 330 0000001A USART1_IRQHandler + 331 0000001A USART2_IRQHandler + 332 0000001A EXTI10_15_IRQHandler + 333 0000001A RTC_Alarm_IRQHandler + 334 0000001A USBFS_WKUP_IRQHandler + 335 0000001A TIMER7_BRK_IRQHandler + 336 0000001A TIMER7_UP_IRQHandler + 337 0000001A TIMER7_TRG_CMT_IRQHandler + 338 0000001A TIMER7_Channel_IRQHandler + 339 0000001A EXMC_IRQHandler + 340 0000001A TIMER4_IRQHandler + + + +ARM Macro Assembler Page 10 + + + 341 0000001A SPI2_IRQHandler + 342 0000001A UART3_IRQHandler + 343 0000001A UART4_IRQHandler + 344 0000001A TIMER5_IRQHandler + 345 0000001A TIMER6_IRQHandler + 346 0000001A DMA1_Channel0_IRQHandler + 347 0000001A DMA1_Channel1_IRQHandler + 348 0000001A DMA1_Channel2_IRQHandler + 349 0000001A DMA1_Channel3_IRQHandler + 350 0000001A DMA1_Channel4_IRQHandler + 351 0000001A ENET_IRQHandler + 352 0000001A ENET_WKUP_IRQHandler + 353 0000001A CAN1_TX_IRQHandler + 354 0000001A CAN1_RX0_IRQHandler + 355 0000001A CAN1_RX1_IRQHandler + 356 0000001A CAN1_EWMC_IRQHandler + 357 0000001A USBFS_IRQHandler + 358 0000001A + 359 0000001A + 360 0000001A E7FE B . + 361 0000001C ENDP + 362 0000001C + 363 0000001C ALIGN + 364 0000001C + 365 0000001C ; user Initial Stack & Heap + 366 0000001C + 367 0000001C IF :DEF:__MICROLIB + 368 0000001C + 369 0000001C EXPORT __initial_sp + 370 0000001C EXPORT __heap_base + 371 0000001C EXPORT __heap_limit + 372 0000001C + 373 0000001C ELSE + 388 ENDIF + 389 0000001C + 390 0000001C END + 00000000 + 00000000 +Command Line: --debug --xref --diag_suppress=9931 --cpu=Cortex-M3 --apcs=interw +ork --depend=.\output\startup_gd32f10x_cl.d -o.\output\startup_gd32f10x_cl.o -I +E:\code\rtt\rt-thread\bsp\gd32105c-eval\RTE -ID:\Keil_v5\ARM\PACK\GigaDevice\GD +32F10x_DFP\2.0.1\Device\Include -ID:\Keil_v5\ARM\CMSIS\Include --predefine="__M +ICROLIB SETA 1" --predefine="__UVISION_VERSION SETA 514" --predefine="GD32F10X_ +CL SETA 1" --predefine="USE_STDPERIPH_DRIVER SETA 1" --list=.\list\startup_gd32 +f10x_cl.lst Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10x_cl.s + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +STACK 00000000 + +Symbol: STACK + Definitions + At line 45 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + None +Comment: STACK unused +Stack_Mem 00000000 + +Symbol: Stack_Mem + Definitions + At line 46 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + None +Comment: Stack_Mem unused +__initial_sp 00002000 + +Symbol: __initial_sp + Definitions + At line 47 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + At line 71 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 369 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +HEAP 00000000 + +Symbol: HEAP + Definitions + At line 56 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + None +Comment: HEAP unused +Heap_Mem 00000000 + +Symbol: Heap_Mem + Definitions + At line 58 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + None +Comment: Heap_Mem unused +__heap_base 00000000 + +Symbol: __heap_base + Definitions + At line 57 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + At line 370 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s +Comment: __heap_base used once +__heap_limit 00002000 + +Symbol: __heap_limit + Definitions + At line 59 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + At line 371 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s +Comment: __heap_limit used once +4 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +RESET 00000000 + +Symbol: RESET + Definitions + At line 66 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + None +Comment: RESET unused +__Vectors 00000000 + +Symbol: __Vectors + Definitions + At line 71 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + At line 67 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 160 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +__Vectors_End 00000150 + +Symbol: __Vectors_End + Definitions + At line 158 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 68 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 160 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +.text 00000000 + +Symbol: .text + Definitions + At line 162 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + None +Comment: .text unused +ADC0_1_IRQHandler 0000001A + +Symbol: ADC0_1_IRQHandler + Definitions + At line 310 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 107 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 241 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +BusFault_Handler 0000000E + +Symbol: BusFault_Handler + Definitions + At line 191 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 76 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 192 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN0_EWMC_IRQHandler 0000001A + +Symbol: CAN0_EWMC_IRQHandler + Definitions + At line 314 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 111 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 245 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN0_RX0_IRQHandler 0000001A + +Symbol: CAN0_RX0_IRQHandler + Definitions + At line 312 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 109 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 243 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN0_RX1_IRQHandler 0000001A + + + + +ARM Macro Assembler Page 2 Alphabetic symbol ordering +Relocatable symbols + +Symbol: CAN0_RX1_IRQHandler + Definitions + At line 313 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 110 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 244 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN0_TX_IRQHandler 0000001A + +Symbol: CAN0_TX_IRQHandler + Definitions + At line 311 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 108 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 242 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN1_EWMC_IRQHandler 0000001A + +Symbol: CAN1_EWMC_IRQHandler + Definitions + At line 356 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 155 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 287 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN1_RX0_IRQHandler 0000001A + +Symbol: CAN1_RX0_IRQHandler + Definitions + At line 354 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 153 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 285 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN1_RX1_IRQHandler 0000001A + +Symbol: CAN1_RX1_IRQHandler + Definitions + At line 355 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 154 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 286 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +CAN1_TX_IRQHandler 0000001A + + + +ARM Macro Assembler Page 3 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: CAN1_TX_IRQHandler + Definitions + At line 353 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 152 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 284 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA0_Channel0_IRQHandler 0000001A + +Symbol: DMA0_Channel0_IRQHandler + Definitions + At line 303 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 100 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 234 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA0_Channel1_IRQHandler 0000001A + +Symbol: DMA0_Channel1_IRQHandler + Definitions + At line 304 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 101 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 235 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA0_Channel2_IRQHandler 0000001A + +Symbol: DMA0_Channel2_IRQHandler + Definitions + At line 305 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 102 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 236 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA0_Channel3_IRQHandler 0000001A + +Symbol: DMA0_Channel3_IRQHandler + Definitions + At line 306 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 103 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 237 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + + + + +ARM Macro Assembler Page 4 Alphabetic symbol ordering +Relocatable symbols + +DMA0_Channel4_IRQHandler 0000001A + +Symbol: DMA0_Channel4_IRQHandler + Definitions + At line 307 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 104 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 238 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA0_Channel5_IRQHandler 0000001A + +Symbol: DMA0_Channel5_IRQHandler + Definitions + At line 308 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 105 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 239 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA0_Channel6_IRQHandler 0000001A + +Symbol: DMA0_Channel6_IRQHandler + Definitions + At line 309 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 106 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 240 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA1_Channel0_IRQHandler 0000001A + +Symbol: DMA1_Channel0_IRQHandler + Definitions + At line 346 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 145 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 277 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA1_Channel1_IRQHandler 0000001A + +Symbol: DMA1_Channel1_IRQHandler + Definitions + At line 347 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 146 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 278 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + + + +ARM Macro Assembler Page 5 Alphabetic symbol ordering +Relocatable symbols + + +DMA1_Channel2_IRQHandler 0000001A + +Symbol: DMA1_Channel2_IRQHandler + Definitions + At line 348 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 147 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 279 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA1_Channel3_IRQHandler 0000001A + +Symbol: DMA1_Channel3_IRQHandler + Definitions + At line 349 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 148 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 280 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DMA1_Channel4_IRQHandler 0000001A + +Symbol: DMA1_Channel4_IRQHandler + Definitions + At line 350 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 149 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 281 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +DebugMon_Handler 00000014 + +Symbol: DebugMon_Handler + Definitions + At line 206 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 83 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 207 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +Default_Handler 0000001A + +Symbol: Default_Handler + Definitions + At line 221 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + None +Comment: Default_Handler unused +ENET_IRQHandler 0000001A + + + +ARM Macro Assembler Page 6 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: ENET_IRQHandler + Definitions + At line 351 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 150 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 282 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +ENET_WKUP_IRQHandler 0000001A + +Symbol: ENET_WKUP_IRQHandler + Definitions + At line 352 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 151 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 283 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +EXMC_IRQHandler 0000001A + +Symbol: EXMC_IRQHandler + Definitions + At line 339 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 137 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 270 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +EXTI0_IRQHandler 0000001A + +Symbol: EXTI0_IRQHandler + Definitions + At line 298 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 95 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 229 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +EXTI10_15_IRQHandler 0000001A + +Symbol: EXTI10_15_IRQHandler + Definitions + At line 332 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 129 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 263 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + + + + +ARM Macro Assembler Page 7 Alphabetic symbol ordering +Relocatable symbols + +EXTI1_IRQHandler 0000001A + +Symbol: EXTI1_IRQHandler + Definitions + At line 299 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 96 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 230 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +EXTI2_IRQHandler 0000001A + +Symbol: EXTI2_IRQHandler + Definitions + At line 300 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 97 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 231 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +EXTI3_IRQHandler 0000001A + +Symbol: EXTI3_IRQHandler + Definitions + At line 301 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 98 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 232 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +EXTI4_IRQHandler 0000001A + +Symbol: EXTI4_IRQHandler + Definitions + At line 302 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 99 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 233 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +EXTI5_9_IRQHandler 0000001A + +Symbol: EXTI5_9_IRQHandler + Definitions + At line 315 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 112 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 246 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + + + +ARM Macro Assembler Page 8 Alphabetic symbol ordering +Relocatable symbols + + +FMC_IRQHandler 0000001A + +Symbol: FMC_IRQHandler + Definitions + At line 296 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 93 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 227 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +HardFault_Handler 0000000A + +Symbol: HardFault_Handler + Definitions + At line 181 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 74 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 182 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +I2C0_ER_IRQHandler 0000001A + +Symbol: I2C0_ER_IRQHandler + Definitions + At line 324 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 121 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 255 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +I2C0_EV_IRQHandler 0000001A + +Symbol: I2C0_EV_IRQHandler + Definitions + At line 323 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 120 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 254 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +I2C1_ER_IRQHandler 0000001A + +Symbol: I2C1_ER_IRQHandler + Definitions + At line 326 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 123 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 257 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 + + + +ARM Macro Assembler Page 9 Alphabetic symbol ordering +Relocatable symbols + +0x_cl.s + +I2C1_EV_IRQHandler 0000001A + +Symbol: I2C1_EV_IRQHandler + Definitions + At line 325 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 122 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 256 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +LVD_IRQHandler 0000001A + +Symbol: LVD_IRQHandler + Definitions + At line 293 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 90 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 224 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +MemManage_Handler 0000000C + +Symbol: MemManage_Handler + Definitions + At line 186 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 75 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 187 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +NMI_Handler 00000008 + +Symbol: NMI_Handler + Definitions + At line 176 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 73 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 177 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +PendSV_Handler 00000016 + +Symbol: PendSV_Handler + Definitions + At line 211 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 85 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + + + +ARM Macro Assembler Page 10 Alphabetic symbol ordering +Relocatable symbols + + At line 212 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +RCU_IRQHandler 0000001A + +Symbol: RCU_IRQHandler + Definitions + At line 297 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 94 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 228 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +RTC_Alarm_IRQHandler 0000001A + +Symbol: RTC_Alarm_IRQHandler + Definitions + At line 333 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 130 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 264 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +RTC_IRQHandler 0000001A + +Symbol: RTC_IRQHandler + Definitions + At line 295 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 92 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 226 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +Reset_Handler 00000000 + +Symbol: Reset_Handler + Definitions + At line 165 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 72 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 166 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +SPI0_IRQHandler 0000001A + +Symbol: SPI0_IRQHandler + Definitions + At line 327 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 124 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 + + + +ARM Macro Assembler Page 11 Alphabetic symbol ordering +Relocatable symbols + +0x_cl.s + At line 258 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +SPI1_IRQHandler 0000001A + +Symbol: SPI1_IRQHandler + Definitions + At line 328 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 125 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 259 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +SPI2_IRQHandler 0000001A + +Symbol: SPI2_IRQHandler + Definitions + At line 341 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 140 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 272 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +SVC_Handler 00000012 + +Symbol: SVC_Handler + Definitions + At line 201 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 82 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 202 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +SysTick_Handler 00000018 + +Symbol: SysTick_Handler + Definitions + At line 216 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 86 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 217 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TAMPER_IRQHandler 0000001A + +Symbol: TAMPER_IRQHandler + Definitions + At line 294 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + + + +ARM Macro Assembler Page 12 Alphabetic symbol ordering +Relocatable symbols + + At line 91 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 225 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER0_BRK_IRQHandler 0000001A + +Symbol: TIMER0_BRK_IRQHandler + Definitions + At line 316 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 113 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 247 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER0_Channel_IRQHandler 0000001A + +Symbol: TIMER0_Channel_IRQHandler + Definitions + At line 319 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 116 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 250 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER0_TRG_CMT_IRQHandler 0000001A + +Symbol: TIMER0_TRG_CMT_IRQHandler + Definitions + At line 318 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 115 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 249 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER0_UP_IRQHandler 0000001A + +Symbol: TIMER0_UP_IRQHandler + Definitions + At line 317 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 114 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 248 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER1_IRQHandler 0000001A + +Symbol: TIMER1_IRQHandler + Definitions + At line 320 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + + + +ARM Macro Assembler Page 13 Alphabetic symbol ordering +Relocatable symbols + + Uses + At line 117 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 251 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER2_IRQHandler 0000001A + +Symbol: TIMER2_IRQHandler + Definitions + At line 321 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 118 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 252 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER3_IRQHandler 0000001A + +Symbol: TIMER3_IRQHandler + Definitions + At line 322 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 119 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 253 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER4_IRQHandler 0000001A + +Symbol: TIMER4_IRQHandler + Definitions + At line 340 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 139 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 271 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER5_IRQHandler 0000001A + +Symbol: TIMER5_IRQHandler + Definitions + At line 344 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 143 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 275 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER6_IRQHandler 0000001A + +Symbol: TIMER6_IRQHandler + Definitions + At line 345 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 + + + +ARM Macro Assembler Page 14 Alphabetic symbol ordering +Relocatable symbols + +0x_cl.s + Uses + At line 144 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 276 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER7_BRK_IRQHandler 0000001A + +Symbol: TIMER7_BRK_IRQHandler + Definitions + At line 335 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 132 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 266 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER7_Channel_IRQHandler 0000001A + +Symbol: TIMER7_Channel_IRQHandler + Definitions + At line 338 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 135 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 269 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER7_TRG_CMT_IRQHandler 0000001A + +Symbol: TIMER7_TRG_CMT_IRQHandler + Definitions + At line 337 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 134 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 268 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +TIMER7_UP_IRQHandler 0000001A + +Symbol: TIMER7_UP_IRQHandler + Definitions + At line 336 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 133 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 267 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +UART3_IRQHandler 0000001A + +Symbol: UART3_IRQHandler + Definitions + + + +ARM Macro Assembler Page 15 Alphabetic symbol ordering +Relocatable symbols + + At line 342 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 141 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 273 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +UART4_IRQHandler 0000001A + +Symbol: UART4_IRQHandler + Definitions + At line 343 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 142 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 274 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +USART0_IRQHandler 0000001A + +Symbol: USART0_IRQHandler + Definitions + At line 329 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 126 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 260 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +USART1_IRQHandler 0000001A + +Symbol: USART1_IRQHandler + Definitions + At line 330 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 127 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 261 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +USART2_IRQHandler 0000001A + +Symbol: USART2_IRQHandler + Definitions + At line 331 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 128 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 262 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +USBFS_IRQHandler 0000001A + +Symbol: USBFS_IRQHandler + + + +ARM Macro Assembler Page 16 Alphabetic symbol ordering +Relocatable symbols + + Definitions + At line 357 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 156 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 288 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +USBFS_WKUP_IRQHandler 0000001A + +Symbol: USBFS_WKUP_IRQHandler + Definitions + At line 334 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 131 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + At line 265 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +UsageFault_Handler 00000010 + +Symbol: UsageFault_Handler + Definitions + At line 196 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 77 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 197 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +WWDGT_IRQHandler 0000001A + +Symbol: WWDGT_IRQHandler + Definitions + At line 292 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 89 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + At line 223 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + +78 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Absolute symbols + +Heap_Size 00002000 + +Symbol: Heap_Size + Definitions + At line 54 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + At line 58 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s +Comment: Heap_Size used once +Stack_Size 00002000 + +Symbol: Stack_Size + Definitions + At line 43 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s + Uses + At line 46 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s +Comment: Stack_Size used once +__Vectors_Size 00000150 + +Symbol: __Vectors_Size + Definitions + At line 160 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 69 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10 +x_cl.s +Comment: __Vectors_Size used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +External symbols + +SystemInit 00000000 + +Symbol: SystemInit + Definitions + At line 168 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 169 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s +Comment: SystemInit used once +__main 00000000 + +Symbol: __main + Definitions + At line 167 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s + Uses + At line 171 in file Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f1 +0x_cl.s +Comment: __main used once +2 symbols +429 symbols in table diff --git a/bsp/gd32105c-eval/project.ewd b/bsp/gd32105c-eval/project.ewd new file mode 100644 index 0000000000000000000000000000000000000000..5f993403562f5f4fa2ef117a8cb7517bdc76d787 --- /dev/null +++ b/bsp/gd32105c-eval/project.ewd @@ -0,0 +1,2834 @@ + + + 3 + + Debug + + ARM + + 1 + + C-SPY + 2 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 1 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 1 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + + Release + + ARM + + 0 + + C-SPY + 2 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 0 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 0 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 0 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 0 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 0 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 0 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + diff --git a/bsp/gd32105c-eval/project.ewp b/bsp/gd32105c-eval/project.ewp new file mode 100644 index 0000000000000000000000000000000000000000..44464ddb907464de9cb5b767f71f84ed8b6d31af --- /dev/null +++ b/bsp/gd32105c-eval/project.ewp @@ -0,0 +1,2399 @@ + + + 3 + + Debug + + ARM + + 1 + + General + 3 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + Applications + + $PROJ_DIR$\applications\main.c + + + + CORTEX-M4 + + $PROJ_DIR$\..\..\libcpu\arm\common\backtrace.c + + + $PROJ_DIR$\..\..\libcpu\arm\cortex-m4\context_iar.S + + + $PROJ_DIR$\..\..\libcpu\arm\cortex-m4\cpuport.c + + + $PROJ_DIR$\..\..\libcpu\arm\common\div0.c + + + $PROJ_DIR$\..\..\libcpu\arm\common\showmem.c + + + + DeviceDrivers + + $PROJ_DIR$\..\..\components\drivers\src\completion.c + + + $PROJ_DIR$\..\..\components\drivers\src\dataqueue.c + + + $PROJ_DIR$\..\..\components\drivers\i2c\i2c_core.c + + + $PROJ_DIR$\..\..\components\drivers\i2c\i2c_dev.c + + + $PROJ_DIR$\..\..\components\drivers\misc\pin.c + + + $PROJ_DIR$\..\..\components\drivers\src\pipe.c + + + $PROJ_DIR$\..\..\components\drivers\src\ringbuffer.c + + + $PROJ_DIR$\..\..\components\drivers\serial\serial.c + + + $PROJ_DIR$\..\..\components\drivers\spi\sfud\src\sfud.c + + + $PROJ_DIR$\..\..\components\drivers\spi\spi_core.c + + + $PROJ_DIR$\..\..\components\drivers\spi\spi_dev.c + + + $PROJ_DIR$\..\..\components\drivers\spi\spi_flash_sfud.c + + + $PROJ_DIR$\..\..\components\drivers\src\waitqueue.c + + + $PROJ_DIR$\..\..\components\drivers\src\workqueue.c + + + + dlib + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\environ.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\libc.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\rmtx.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\stdio.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\syscall_close.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\syscall_lseek.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\syscall_mem.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\syscall_open.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\syscall_read.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\syscall_remove.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\syscall_write.c + + + $PROJ_DIR$\..\..\components\libc\compilers\dlib\time.c + + + + Drivers + + $PROJ_DIR$\drivers\board.c + + + $PROJ_DIR$\drivers\drv_gpio.c + + + $PROJ_DIR$\drivers\drv_i2c.c + + + $PROJ_DIR$\drivers\drv_spi.c + + + $PROJ_DIR$\drivers\drv_usart.c + + + + Filesystem + + $PROJ_DIR$\..\..\components\dfs\filesystems\devfs\devfs.c + + + $PROJ_DIR$\..\..\components\dfs\src\dfs.c + + + $PROJ_DIR$\..\..\components\dfs\filesystems\elmfat\dfs_elm.c + + + $PROJ_DIR$\..\..\components\dfs\src\dfs_file.c + + + $PROJ_DIR$\..\..\components\dfs\src\dfs_fs.c + + + $PROJ_DIR$\..\..\components\dfs\src\dfs_posix.c + + + $PROJ_DIR$\..\..\components\dfs\filesystems\elmfat\ff.c + + + + finsh + + $PROJ_DIR$\..\..\components\finsh\cmd.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_compiler.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_error.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_heap.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_init.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_node.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_ops.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_parser.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_token.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_var.c + + + $PROJ_DIR$\..\..\components\finsh\finsh_vm.c + + + $PROJ_DIR$\..\..\components\finsh\msh.c + + + $PROJ_DIR$\..\..\components\finsh\msh_cmd.c + + + $PROJ_DIR$\..\..\components\finsh\msh_file.c + + + $PROJ_DIR$\..\..\components\finsh\shell.c + + + $PROJ_DIR$\..\..\components\finsh\symbol.c + + + + GD32_Lib + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_adc.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_bkp.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_can.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_crc.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_ctc.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_dac.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_dbg.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_dma.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_enet.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_exmc.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_exti.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_fmc.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_fwdgt.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_gpio.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_i2c.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_misc.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_pmu.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_rcu.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_rtc.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_sdio.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_spi.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_timer.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_usart.c + + + $PROJ_DIR$\Libraries\GD32F30x_standard_peripheral\Source\gd32f30x_wwdgt.c + + + $PROJ_DIR$\Libraries\CMSIS\GD\GD32F30x\Source\IAR\startup_gd32f30x_hd.s + + + $PROJ_DIR$\Libraries\CMSIS\GD\GD32F30x\Source\system_gd32f30x.c + + + + Kernel + + $PROJ_DIR$\..\..\src\clock.c + + + $PROJ_DIR$\..\..\src\components.c + + + $PROJ_DIR$\..\..\src\device.c + + + $PROJ_DIR$\..\..\src\idle.c + + + $PROJ_DIR$\..\..\src\ipc.c + + + $PROJ_DIR$\..\..\src\irq.c + + + $PROJ_DIR$\..\..\src\kservice.c + + + $PROJ_DIR$\..\..\src\mem.c + + + $PROJ_DIR$\..\..\src\mempool.c + + + $PROJ_DIR$\..\..\src\object.c + + + $PROJ_DIR$\..\..\src\scheduler.c + + + $PROJ_DIR$\..\..\src\signal.c + + + $PROJ_DIR$\..\..\src\thread.c + + + $PROJ_DIR$\..\..\src\timer.c + + + diff --git a/bsp/gd32105c-eval/project.eww b/bsp/gd32105c-eval/project.eww new file mode 100644 index 0000000000000000000000000000000000000000..faa93f37cdf824efd53c15b77e75dc1f03727d9a --- /dev/null +++ b/bsp/gd32105c-eval/project.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\project.ewp + + + + + diff --git a/bsp/gd32105c-eval/project.uvguix.lza b/bsp/gd32105c-eval/project.uvguix.lza new file mode 100644 index 0000000000000000000000000000000000000000..f6a4f0e517a9c4524ce15eedeac2e30296087e68 --- /dev/null +++ b/bsp/gd32105c-eval/project.uvguix.lza @@ -0,0 +1,2745 @@ + + + + -5.1 + +
### uVision Project, (C) Keil Software
+ + + + + + 38003 + Registers + 115 275 + + + 346 + Code Coverage + 562 160 + + + 204 + Performance Analyzer + 722 + + + + + + 1506 + Symbols + + 133 133 133 + + + 1936 + Watch 1 + + 133 133 133 + + + 1937 + Watch 2 + + 133 133 133 + + + 1935 + Call Stack + Locals + + 133 133 133 + + + 2506 + Trace Data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uild + + -1 + -1 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 940100004F00000070040000BD000000 + + + 16 + 340300008200000010060000F0000000 + + + + 1005 + 1005 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100008A010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 109 + 109 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100008A010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 1465 + 1465 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1466 + 1466 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1467 + 1467 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1468 + 1468 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1506 + 1506 + 0 + 0 + 0 + 0 + 32767 + 0 + 16384 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1913 + 1913 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1935 + 1935 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1936 + 1936 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1937 + 1937 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1939 + 1939 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1940 + 1940 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1941 + 1941 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1942 + 1942 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 195 + 195 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100008A010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 196 + 196 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100008A010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 197 + 197 + 1 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 00000000BB0100006F030000DD020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 198 + 198 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 00000000950100007004000017020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 199 + 199 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BE0100006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 203 + 203 + 0 + 0 + 0 + 0 + 32767 + 0 + 8192 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 204 + 204 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 221 + 221 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000000000000000000000000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2506 + 2506 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 2507 + 2507 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 343 + 343 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 346 + 346 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 35824 + 35824 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 35885 + 35885 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35886 + 35886 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35887 + 35887 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35888 + 35888 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35889 + 35889 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35890 + 35890 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35891 + 35891 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35892 + 35892 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35893 + 35893 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35894 + 35894 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35895 + 35895 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35896 + 35896 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35897 + 35897 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35898 + 35898 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35899 + 35899 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35900 + 35900 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35901 + 35901 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35902 + 35902 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35903 + 35903 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35904 + 35904 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35905 + 35905 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 38003 + 38003 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100008A010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 38007 + 38007 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BE0100006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 436 + 436 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BE0100006C030000C4020000 + + + 16 + BE000000D5000000A101000091020000 + + + + 437 + 437 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 440 + 440 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 59392 + 59392 + 1 + 0 + 0 + 0 + 940 + 0 + 8192 + 0 + + 16 + 00000000000000006F0300001C000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59393 + 0 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000DD0200006F030000F0020000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59399 + 59399 + 1 + 0 + 0 + 0 + 463 + 0 + 8192 + 1 + + 16 + 000000001C000000DA01000038000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59400 + 59400 + 0 + 0 + 0 + 0 + 612 + 0 + 8192 + 2 + + 16 + 00000000380000006F02000054000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2619 + 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 + + + 59392 + File + + 2033 + 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 + + + 1423 + 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 + + + 1423 + 2800FFFF01001100434D4643546F6F6C426172427574746F6E00E100000000000000000000000000000000000000000000000100000001000000018001E100000000000001000000000000000000000000000000000100000001000000018003E1000000000000020000000000000000000000000000000001000000010000000180CD7F0000000000000300000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018023E100000000000004000000000000000000000000000000000100000001000000018022E100000000000005000000000000000000000000000000000100000001000000018025E10000000000000600000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001802BE10000000000000700000000000000000000000000000000010000000100000001802CE10000000000000800000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001807A8A0000000000000900000000000000000000000000000000010000000100000001807B8A0000000000000A00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180D3B00000000000000B000000000000000000000000000000000100000001000000018015B10000000000000C0000000000000000000000000000000001000000010000000180F4B00000000000000D000000000000000000000000000000000100000001000000018036B10000000000000E00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FF880000000000000F0000000000000000000000000000000001000000010000000180FE880000000000001000000000000000000000000000000000010000000100000001800B810000000000001100000000000000000000000000000000010000000100000001800C810000000000001200000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180F088000000000000130000000000000000000000000000000001000000010000000180EE7F00000000000014000000000000000000000000000000000100000001000000018024E10000000000001500000000000000000000000000000000010000000100000001800A810000000000001600000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018022800000000000001700000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180C488000000000000180000000000000000000000000000000001000000010000000180C988000000000000190000000000000000000000000000000001000000010000000180C7880000000000001A0000000000000000000000000000000001000000010000000180C8880000000000001B00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180DD880000000000001C00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FB7F0000000000001D000000000000000000000000000000000100000001000000 + + + + 59399 + Build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ebug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ebug + + -1 + -1 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 940100004F0000006F030000BD000000 + + + 16 + 34030000820000000F050000F0000000 + + + + 1005 + 1005 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100003E020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 109 + 109 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100003E020000 + + + 16 + BE000000D5000000A101000091020000 + + + + 1465 + 1465 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1466 + 1466 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1467 + 1467 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1468 + 1468 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1506 + 1506 + 0 + 0 + 0 + 0 + 32767 + 0 + 16384 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1913 + 1913 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006C030000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1935 + 1935 + 1 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1936 + 1936 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1937 + 1937 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1939 + 1939 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1940 + 1940 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1941 + 1941 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1942 + 1942 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 195 + 195 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100003E020000 + + + 16 + BE000000D5000000A101000091020000 + + + + 196 + 196 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100003E020000 + + + 16 + BE000000D5000000A101000091020000 + + + + 197 + 197 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 198 + 198 + 1 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 000000005B020000B8010000DD020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 199 + 199 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 203 + 203 + 1 + 0 + 0 + 0 + 32767 + 0 + 8192 + 0 + + 16 + 94010000630000006F030000BD000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 204 + 204 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006C030000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 221 + 221 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000000000000000000000000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2506 + 2506 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 2507 + 2507 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 343 + 343 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006C030000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 346 + 346 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006C030000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 35824 + 35824 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006C030000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 35885 + 35885 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35886 + 35886 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35887 + 35887 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35888 + 35888 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35889 + 35889 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35890 + 35890 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35891 + 35891 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35892 + 35892 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35893 + 35893 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35894 + 35894 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35895 + 35895 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35896 + 35896 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35897 + 35897 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35898 + 35898 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35899 + 35899 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35900 + 35900 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35901 + 35901 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35902 + 35902 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35903 + 35903 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35904 + 35904 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35905 + 35905 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 38003 + 38003 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100003E020000 + + + 16 + BE000000D5000000A101000091020000 + + + + 38007 + 38007 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 436 + 436 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 437 + 437 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 440 + 440 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + BF010000720200006C030000C4020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 59392 + 59392 + 1 + 0 + 0 + 0 + 940 + 0 + 8192 + 0 + + 16 + 00000000000000006F0300001C000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59393 + 0 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000DD0200006F030000F0020000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59399 + 59399 + 0 + 0 + 0 + 0 + 463 + 0 + 8192 + 1 + + 16 + 000000001C000000DA01000038000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59400 + 59400 + 1 + 0 + 0 + 0 + 612 + 0 + 8192 + 2 + + 16 + 000000001C0000006F02000038000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2618 + 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 + + + 59392 + File + + 2023 + 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 + + + 1423 + 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 + + + 1423 + 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 + + + + 59399 + Build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ebug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libcpu\arm\cortex-m3\context_rvds.S + 11 + 34 + 46 + 1 + + 0 + + + applications\main.c + 20 + 4 + 10 + 1 + + 0 + + + ..\..\src\components.c + 0 + 137 + 141 + 1 + + 0 + + + Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10x_cl.s + 0 + 167 + 169 + 1 + + 0 + + + drivers\board.c + 0 + 13 + 14 + 1 + + 0 + + + drivers\drv_usart.c + 0 + 8 + 13 + 1 + + 0 + + + ..\..\src\idle.c + 0 + 287 + 296 + 1 + + 0 + + + drivers\drv_spi.c + 19 + 8 + 15 + 1 + + 0 + + + drivers\drv_gpio.c + 6 + 233 + 238 + 1 + + 0 + + + drivers\drv_i2c.c + 0 + 8 + 11 + 1 + + 0 + + + E:\code\rtt\rt-thread\libcpu\arm\cortex-m4\context_rvds.S + 0 + 13 + 19 + 1 + + 0 + + + drivers\board.h + 21 + 11 + 15 + 1 + + 0 + + + Libraries\CMSIS\GD\GD32F10x\Include\gd32f10x.h + 25 + 249 + 258 + 1 + + 0 + + + ..\..\libcpu\arm\common\showmem.c + 0 + 1 + 1 + 1 + + 0 + + + ..\..\components\drivers\src\ringbuffer.c + 30 + 230 + 232 + 1 + + 0 + + + ..\..\src\kservice.c + 15 + 1354 + 1361 + 1 + + 0 + + + ..\..\src\irq.c + 0 + 108 + 122 + 1 + + 0 + + + + + diff --git a/bsp/gd32105c-eval/project.uvoptx b/bsp/gd32105c-eval/project.uvoptx new file mode 100644 index 0000000000000000000000000000000000000000..a23853c2c96216d547867f4171ac4cfb1306b35d --- /dev/null +++ b/bsp/gd32105c-eval/project.uvoptx @@ -0,0 +1,1262 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread_gd32f105 + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\list\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + 1 + 0 + 0 + 6 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U58001139 -O14 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(4BA00477) -L00(4) -N01("Unknown JTAG device") -D01(790007A3) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC1000 -FN1 -FF0GD32F10x_CL -FS08000000 -FL0300000 -FP0($$Device:GD32F105VC$Flash\GD32F10x_CL.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0GD32F10x_CL -FL040000 -FS08000000 -FP0($$Device:GD32F105VC$Flash\GD32F10x_CL.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + Applications + 0 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + 0 + applications\main.c + main.c + 0 + 0 + + + + + CPU + 0 + 0 + 0 + 0 + + 2 + 2 + 1 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 2 + 3 + 1 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 2 + 4 + 1 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\common\backtrace.c + backtrace.c + 0 + 0 + + + 2 + 5 + 1 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\cortex-m3\cpuport.c + cpuport.c + 0 + 0 + + + 2 + 6 + 2 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\cortex-m3\context_rvds.S + context_rvds.S + 0 + 0 + + + + + DeviceDrivers + 0 + 0 + 0 + 0 + + 3 + 7 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\i2c\i2c_core.c + i2c_core.c + 0 + 0 + + + 3 + 8 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\i2c\i2c_dev.c + i2c_dev.c + 0 + 0 + + + 3 + 9 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\misc\pin.c + pin.c + 0 + 0 + + + 3 + 10 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\serial\serial.c + serial.c + 0 + 0 + + + 3 + 11 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\spi\sfud\src\sfud.c + sfud.c + 0 + 0 + + + 3 + 12 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\spi\spi_flash_sfud.c + spi_flash_sfud.c + 0 + 0 + + + 3 + 13 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\spi\sfud\src\sfud_sfdp.c + sfud_sfdp.c + 0 + 0 + + + 3 + 14 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\spi\spi_core.c + spi_core.c + 0 + 0 + + + 3 + 15 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\spi\spi_dev.c + spi_dev.c + 0 + 0 + + + 3 + 16 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\completion.c + completion.c + 0 + 0 + + + 3 + 17 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\workqueue.c + workqueue.c + 0 + 0 + + + 3 + 18 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 3 + 19 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\dataqueue.c + dataqueue.c + 0 + 0 + + + 3 + 20 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\pipe.c + pipe.c + 0 + 0 + + + 3 + 21 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\waitqueue.c + waitqueue.c + 0 + 0 + + + 3 + 22 + 1 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + + + Drivers + 0 + 0 + 0 + 0 + + 4 + 23 + 1 + 0 + 0 + 0 + 0 + drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + 4 + 24 + 1 + 0 + 0 + 0 + 0 + drivers\drv_spi.c + drv_spi.c + 0 + 0 + + + 4 + 25 + 1 + 0 + 0 + 0 + 0 + drivers\drv_i2c.c + drv_i2c.c + 0 + 0 + + + 4 + 26 + 1 + 0 + 0 + 0 + 0 + drivers\drv_spi_flash.c + drv_spi_flash.c + 0 + 0 + + + 4 + 27 + 1 + 0 + 0 + 0 + 0 + drivers\drv_usart.c + drv_usart.c + 0 + 0 + + + 4 + 28 + 1 + 0 + 0 + 0 + 0 + drivers\board.c + board.c + 0 + 0 + + + + + Filesystem + 0 + 0 + 0 + 0 + + 5 + 29 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\src\dfs_posix.c + dfs_posix.c + 0 + 0 + + + 5 + 30 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\src\dfs_fs.c + dfs_fs.c + 0 + 0 + + + 5 + 31 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\src\dfs.c + dfs.c + 0 + 0 + + + 5 + 32 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\src\dfs_file.c + dfs_file.c + 0 + 0 + + + 5 + 33 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\filesystems\devfs\devfs.c + devfs.c + 0 + 0 + + + 5 + 34 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\filesystems\elmfat\ff.c + ff.c + 0 + 0 + + + 5 + 35 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\filesystems\elmfat\dfs_elm.c + dfs_elm.c + 0 + 0 + + + 5 + 36 + 1 + 0 + 0 + 0 + 0 + ..\..\components\dfs\filesystems\elmfat\ffunicode.c + ffunicode.c + 0 + 0 + + + + + Kernel + 0 + 0 + 0 + 0 + + 6 + 37 + 1 + 0 + 0 + 0 + 0 + ..\..\src\thread.c + thread.c + 0 + 0 + + + 6 + 38 + 1 + 0 + 0 + 0 + 0 + ..\..\src\mempool.c + mempool.c + 0 + 0 + + + 6 + 39 + 1 + 0 + 0 + 0 + 0 + ..\..\src\mem.c + mem.c + 0 + 0 + + + 6 + 40 + 1 + 0 + 0 + 0 + 0 + ..\..\src\timer.c + timer.c + 0 + 0 + + + 6 + 41 + 1 + 0 + 0 + 0 + 0 + ..\..\src\kservice.c + kservice.c + 0 + 0 + + + 6 + 42 + 1 + 0 + 0 + 0 + 0 + ..\..\src\scheduler.c + scheduler.c + 0 + 0 + + + 6 + 43 + 1 + 0 + 0 + 0 + 0 + ..\..\src\irq.c + irq.c + 0 + 0 + + + 6 + 44 + 1 + 0 + 0 + 0 + 0 + ..\..\src\clock.c + clock.c + 0 + 0 + + + 6 + 45 + 1 + 0 + 0 + 0 + 0 + ..\..\src\device.c + device.c + 0 + 0 + + + 6 + 46 + 1 + 0 + 0 + 0 + 0 + ..\..\src\object.c + object.c + 0 + 0 + + + 6 + 47 + 1 + 0 + 0 + 0 + 0 + ..\..\src\ipc.c + ipc.c + 0 + 0 + + + 6 + 48 + 1 + 0 + 0 + 0 + 0 + ..\..\src\components.c + components.c + 0 + 0 + + + 6 + 49 + 1 + 0 + 0 + 0 + 0 + ..\..\src\idle.c + idle.c + 0 + 0 + + + + + libc + 0 + 0 + 0 + 0 + + 7 + 50 + 1 + 0 + 0 + 0 + 0 + ..\..\components\libc\compilers\common\time.c + time.c + 0 + 0 + + + + + Libraries + 0 + 0 + 0 + 0 + + 8 + 51 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_gpio.c + gd32f10x_gpio.c + 0 + 0 + + + 8 + 52 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_exti.c + gd32f10x_exti.c + 0 + 0 + + + 8 + 53 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_spi.c + gd32f10x_spi.c + 0 + 0 + + + 8 + 54 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_dbg.c + gd32f10x_dbg.c + 0 + 0 + + + 8 + 55 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_timer.c + gd32f10x_timer.c + 0 + 0 + + + 8 + 56 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_crc.c + gd32f10x_crc.c + 0 + 0 + + + 8 + 57 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_misc.c + gd32f10x_misc.c + 0 + 0 + + + 8 + 58 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_dac.c + gd32f10x_dac.c + 0 + 0 + + + 8 + 59 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_usart.c + gd32f10x_usart.c + 0 + 0 + + + 8 + 60 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_i2c.c + gd32f10x_i2c.c + 0 + 0 + + + 8 + 61 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_fmc.c + gd32f10x_fmc.c + 0 + 0 + + + 8 + 62 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_dma.c + gd32f10x_dma.c + 0 + 0 + + + 8 + 63 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_sdio.c + gd32f10x_sdio.c + 0 + 0 + + + 8 + 64 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_adc.c + gd32f10x_adc.c + 0 + 0 + + + 8 + 65 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_pmu.c + gd32f10x_pmu.c + 0 + 0 + + + 8 + 66 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_can.c + gd32f10x_can.c + 0 + 0 + + + 8 + 67 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_exmc.c + gd32f10x_exmc.c + 0 + 0 + + + 8 + 68 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_wwdgt.c + gd32f10x_wwdgt.c + 0 + 0 + + + 8 + 69 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_rtc.c + gd32f10x_rtc.c + 0 + 0 + + + 8 + 70 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_enet.c + gd32f10x_enet.c + 0 + 0 + + + 8 + 71 + 2 + 0 + 0 + 0 + 0 + Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10x_cl.s + startup_gd32f10x_cl.s + 0 + 0 + + + 8 + 72 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_bkp.c + gd32f10x_bkp.c + 0 + 0 + + + 8 + 73 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_fwdgt.c + gd32f10x_fwdgt.c + 0 + 0 + + + 8 + 74 + 1 + 0 + 0 + 0 + 0 + Libraries\CMSIS\GD\GD32F10x\Source\system_gd32f10x.c + system_gd32f10x.c + 0 + 0 + + + 8 + 75 + 1 + 0 + 0 + 0 + 0 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_rcu.c + gd32f10x_rcu.c + 0 + 0 + + + + + msh + 1 + 0 + 0 + 0 + + 9 + 76 + 1 + 0 + 0 + 0 + 0 + ..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 9 + 77 + 1 + 0 + 0 + 0 + 0 + ..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + 9 + 78 + 1 + 0 + 0 + 0 + 0 + ..\..\components\finsh\msh_file.c + msh_file.c + 0 + 0 + + + 9 + 79 + 1 + 0 + 0 + 0 + 0 + ..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + + diff --git a/bsp/gd32105c-eval/project.uvprojx b/bsp/gd32105c-eval/project.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..07abf96266dc77095e6b39586ea8ecaf1f096c5d --- /dev/null +++ b/bsp/gd32105c-eval/project.uvprojx @@ -0,0 +1,912 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread_gd32f105 + 0x4 + ARM-ADS + + + GD32F105VC + GigaDevice + GigaDevice.GD32F10x_DFP.2.0.1 + http://www.keil.com/pack/ + IRAM(0x20000000,0x00018000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0GD32F10x_CL -FS08000000 -FL040000 -FP0($$Device:GD32F105VC$Flash\GD32F10x_CL.FLM)) + 0 + $$Device:GD32F105VC$Device\Include\gd32f10x.h + + + + + + + + + + $$Device:GD32F105VC$SVD\GD32F10x\GD32F10x_CL.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\output\ + Project + 1 + 0 + 1 + 1 + 1 + .\list\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP + DCM.DLL + -pCM3 + SARMCM3.DLL + + TCM.DLL + -pCM3 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + + 0 + 6 + + + + + + + + + + + + + + Segger\JL2CM3.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x18000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x18000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 0 + 0 + + + GD32F10X_CL, USE_STDPERIPH_DRIVER, __RTTHREAD__, __CLK_TCK=RT_TICK_PER_SECOND + + applications;.;..\..\libcpu\arm\common;..\..\libcpu\arm\cortex-m3;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\spi;..\..\components\drivers\include;..\..\components\drivers\spi\sfud\inc;..\..\components\drivers\include;drivers;..\..\components\dfs\include;..\..\components\dfs\filesystems\devfs;..\..\components\dfs\filesystems\elmfat;.;..\..\include;..\..\components\libc\compilers\common;..\..\components\libc\compilers\common\none-gcc;Libraries\CMSIS\GD\GD32F10x\Include;Libraries\CMSIS;Libraries\GD32F10x_standard_peripheral\Include;..\..\components\finsh;..\..\examples\utest\testcases\kernel + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + CPU + + + div0.c + 1 + ..\..\libcpu\arm\common\div0.c + + + showmem.c + 1 + ..\..\libcpu\arm\common\showmem.c + + + backtrace.c + 1 + ..\..\libcpu\arm\common\backtrace.c + + + cpuport.c + 1 + ..\..\libcpu\arm\cortex-m3\cpuport.c + + + context_rvds.S + 2 + ..\..\libcpu\arm\cortex-m3\context_rvds.S + + + + + DeviceDrivers + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 0 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + --c99 + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + i2c_core.c + 1 + ..\..\components\drivers\i2c\i2c_core.c + + + i2c_dev.c + 1 + ..\..\components\drivers\i2c\i2c_dev.c + + + pin.c + 1 + ..\..\components\drivers\misc\pin.c + + + serial.c + 1 + ..\..\components\drivers\serial\serial.c + + + sfud.c + 1 + ..\..\components\drivers\spi\sfud\src\sfud.c + + + spi_flash_sfud.c + 1 + ..\..\components\drivers\spi\spi_flash_sfud.c + + + sfud_sfdp.c + 1 + ..\..\components\drivers\spi\sfud\src\sfud_sfdp.c + + + spi_core.c + 1 + ..\..\components\drivers\spi\spi_core.c + + + spi_dev.c + 1 + ..\..\components\drivers\spi\spi_dev.c + + + completion.c + 1 + ..\..\components\drivers\src\completion.c + + + workqueue.c + 1 + ..\..\components\drivers\src\workqueue.c + + + ringbuffer.c + 1 + ..\..\components\drivers\src\ringbuffer.c + + + dataqueue.c + 1 + ..\..\components\drivers\src\dataqueue.c + + + pipe.c + 1 + ..\..\components\drivers\src\pipe.c + + + waitqueue.c + 1 + ..\..\components\drivers\src\waitqueue.c + + + ringblk_buf.c + 1 + ..\..\components\drivers\src\ringblk_buf.c + + + + + Drivers + + + drv_gpio.c + 1 + drivers\drv_gpio.c + + + drv_spi.c + 1 + drivers\drv_spi.c + + + drv_i2c.c + 1 + drivers\drv_i2c.c + + + drv_spi_flash.c + 1 + drivers\drv_spi_flash.c + + + drv_usart.c + 1 + drivers\drv_usart.c + + + board.c + 1 + drivers\board.c + + + + + Filesystem + + + dfs_posix.c + 1 + ..\..\components\dfs\src\dfs_posix.c + + + dfs_fs.c + 1 + ..\..\components\dfs\src\dfs_fs.c + + + dfs.c + 1 + ..\..\components\dfs\src\dfs.c + + + dfs_file.c + 1 + ..\..\components\dfs\src\dfs_file.c + + + devfs.c + 1 + ..\..\components\dfs\filesystems\devfs\devfs.c + + + ff.c + 1 + ..\..\components\dfs\filesystems\elmfat\ff.c + + + dfs_elm.c + 1 + ..\..\components\dfs\filesystems\elmfat\dfs_elm.c + + + ffunicode.c + 1 + ..\..\components\dfs\filesystems\elmfat\ffunicode.c + + + + + Kernel + + + thread.c + 1 + ..\..\src\thread.c + + + mempool.c + 1 + ..\..\src\mempool.c + + + mem.c + 1 + ..\..\src\mem.c + + + timer.c + 1 + ..\..\src\timer.c + + + kservice.c + 1 + ..\..\src\kservice.c + + + scheduler.c + 1 + ..\..\src\scheduler.c + + + irq.c + 1 + ..\..\src\irq.c + + + clock.c + 1 + ..\..\src\clock.c + + + device.c + 1 + ..\..\src\device.c + + + object.c + 1 + ..\..\src\object.c + + + ipc.c + 1 + ..\..\src\ipc.c + + + components.c + 1 + ..\..\src\components.c + + + idle.c + 1 + ..\..\src\idle.c + + + + + libc + + + time.c + 1 + ..\..\components\libc\compilers\common\time.c + + + + + Libraries + + + gd32f10x_gpio.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_gpio.c + + + gd32f10x_exti.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_exti.c + + + gd32f10x_spi.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_spi.c + + + gd32f10x_dbg.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_dbg.c + + + gd32f10x_timer.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_timer.c + + + gd32f10x_crc.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_crc.c + + + gd32f10x_misc.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_misc.c + + + gd32f10x_dac.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_dac.c + + + gd32f10x_usart.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_usart.c + + + gd32f10x_i2c.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_i2c.c + + + gd32f10x_fmc.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_fmc.c + + + gd32f10x_dma.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_dma.c + + + gd32f10x_sdio.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_sdio.c + + + gd32f10x_adc.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_adc.c + + + gd32f10x_pmu.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_pmu.c + + + gd32f10x_can.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_can.c + + + gd32f10x_exmc.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_exmc.c + + + gd32f10x_wwdgt.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_wwdgt.c + + + gd32f10x_rtc.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_rtc.c + + + gd32f10x_enet.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_enet.c + + + startup_gd32f10x_cl.s + 2 + Libraries\CMSIS\GD\GD32F10x\Source\ARM\startup_gd32f10x_cl.s + + + gd32f10x_bkp.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_bkp.c + + + gd32f10x_fwdgt.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_fwdgt.c + + + system_gd32f10x.c + 1 + Libraries\CMSIS\GD\GD32F10x\Source\system_gd32f10x.c + + + gd32f10x_rcu.c + 1 + Libraries\GD32F10x_standard_peripheral\Source\gd32f10x_rcu.c + + + + + msh + + + shell.c + 1 + ..\..\components\finsh\shell.c + + + msh.c + 1 + ..\..\components\finsh\msh.c + + + msh_file.c + 1 + ..\..\components\finsh\msh_file.c + + + cmd.c + 1 + ..\..\components\finsh\cmd.c + + + + + + + + diff --git a/bsp/gd32105c-eval/rtconfig.h b/bsp/gd32105c-eval/rtconfig.h new file mode 100644 index 0000000000000000000000000000000000000000..0d8737cd9e80c9d306ae0d8ea5d521753e9a2b60 --- /dev/null +++ b/bsp/gd32105c-eval/rtconfig.h @@ -0,0 +1,207 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 100 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 + +/* kservice optimization */ + +#define RT_DEBUG +#define RT_DEBUG_COLOR + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "uart0" +#define RT_VER_NUM 0x40004 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + +/* C++ features */ + + +/* Command shell */ + +#define RT_USING_FINSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_USING_DESCRIPTION +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_CMD_SIZE 80 +#define FINSH_USING_MSH +#define FINSH_USING_MSH_DEFAULT +#define FINSH_ARG_MAX 10 + +/* Device virtual file system */ + +#define RT_USING_DFS +#define DFS_USING_WORKDIR +#define DFS_FILESYSTEMS_MAX 4 +#define DFS_FILESYSTEM_TYPES_MAX 4 +#define DFS_FD_MAX 16 +#define RT_USING_DFS_ELMFAT + +/* elm-chan's FatFs, Generic FAT Filesystem Module */ + +#define RT_DFS_ELM_CODE_PAGE 437 +#define RT_DFS_ELM_WORD_ACCESS +#define RT_DFS_ELM_USE_LFN_3 +#define RT_DFS_ELM_USE_LFN 3 +#define RT_DFS_ELM_LFN_UNICODE_0 +#define RT_DFS_ELM_LFN_UNICODE 0 +#define RT_DFS_ELM_MAX_LFN 255 +#define RT_DFS_ELM_DRIVES 2 +#define RT_DFS_ELM_MAX_SECTOR_SIZE 4096 +#define RT_DFS_ELM_REENTRANT +#define RT_USING_DFS_DEVFS + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_PIPE_BUFSZ 512 +#define RT_USING_SERIAL +#define RT_USING_SERIAL_V1 +#define RT_SERIAL_USING_DMA +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_I2C +#define RT_USING_PIN +#define RT_USING_SPI +#define RT_USING_SFUD +#define RT_SFUD_USING_SFDP +#define RT_SFUD_USING_FLASH_INFO_TABLE +#define RT_SFUD_SPI_MAX_HZ 50000000 + +/* Using USB */ + + +/* POSIX layer and C standard library */ + +#define RT_LIBC_USING_TIME +#define RT_LIBC_DEFAULT_TIMEZONE 8 + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread Utestcases */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* tools packages */ + + +/* system packages */ + +/* acceleration: Assembly language or algorithmic acceleration packages */ + + +/* Micrium: Micrium software products porting for RT-Thread */ + + +/* peripheral libraries and drivers */ + + +/* AI packages */ + + +/* miscellaneous packages */ + +/* samples: kernel and components samples */ + + +/* entertainment: terminal games and other interesting software packages */ + + +/* Hardware Drivers Config */ + +/* Onboard Peripheral Drivers */ + +/* On-chip Peripheral Drivers */ + +#define SOC_SERIES_GD32F1 +#define SOC_GD32105C +#define RT_USING_USART0 +#define RT_USING_SPI0 +#define RT_USING_I2C0 + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/gd32105c-eval/rtconfig.py b/bsp/gd32105c-eval/rtconfig.py new file mode 100644 index 0000000000000000000000000000000000000000..7a845afd38fe71c4687958bd155ff291f5857bf3 --- /dev/null +++ b/bsp/gd32105c-eval/rtconfig.py @@ -0,0 +1,126 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m3' +CROSS_TOOL='keil' + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'D:/toolchain/gnu_tools_arm_embedded/5.4_2016q3/bin' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iar' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # tool-chains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' # -D' + PART_TYPE + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-gd32.map,-cref,-u,Reset_Handler -T gd32_rom.ld' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4' + CFLAGS = DEVICE + ' --apcs=interwork' + AFLAGS = DEVICE + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-gd32.map --scatter gd32_rom.sct' + + LFLAGS += ' --keep *.o(.rti_fn.*) --keep *.o(FSymTab) --keep *.o(VSymTab)' + + EXEC_PATH += '/ARM/ARMCC/bin' + print(EXEC_PATH) + + CFLAGS += ' --c99' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iar': + # toolchains + CC = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = ' -D USE_STDPERIPH_DRIVER' + ' -D GD32F30X_HD' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --debug' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M4' + CFLAGS += ' -e' + CFLAGS += ' --fpu=None' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' -Ol' + CFLAGS += ' --use_c++_inline' + + AFLAGS = '' + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M4' + AFLAGS += ' --fpu None' + + LFLAGS = ' --config gd32_rom.icf' + LFLAGS += ' --redirect _Printf=_PrintfTiny' + LFLAGS += ' --redirect _Scanf=_ScanfSmall' + LFLAGS += ' --entry __iar_program_start' + + EXEC_PATH += '/arm/bin/' + POST_ACTION = '' + diff --git a/bsp/gd32105c-eval/startcmd.bat b/bsp/gd32105c-eval/startcmd.bat new file mode 100644 index 0000000000000000000000000000000000000000..a03f9d44c319381583414a721f37fd8dce49d5a6 --- /dev/null +++ b/bsp/gd32105c-eval/startcmd.bat @@ -0,0 +1 @@ +start cmd.exe \ No newline at end of file diff --git a/bsp/gd32105c-eval/template.ewp b/bsp/gd32105c-eval/template.ewp new file mode 100644 index 0000000000000000000000000000000000000000..716042958e83bc49540b3d014d7027b61054dcd1 --- /dev/null +++ b/bsp/gd32105c-eval/template.ewp @@ -0,0 +1,1889 @@ + + + 2 + + Debug + + ARM + + 1 + + General + 3 + + 22 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 31 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 9 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 16 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 22 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 31 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 16 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + + diff --git a/bsp/gd32105c-eval/template.uvguix.lza b/bsp/gd32105c-eval/template.uvguix.lza new file mode 100644 index 0000000000000000000000000000000000000000..32c28731f99d4b36ee076f77fd4f8f06efd064c0 --- /dev/null +++ b/bsp/gd32105c-eval/template.uvguix.lza @@ -0,0 +1,2583 @@ + + + + -5.1 + +
### uVision Project, (C) Keil Software
+ + + + + + 38003 + Registers + 115 275 + + + 346 + Code Coverage + 562 160 + + + 204 + Performance Analyzer + 722 + + + + + + 1506 + Symbols + + 133 133 133 + + + 1936 + Watch 1 + + 133 133 133 + + + 1937 + Watch 2 + + 133 133 133 + + + 1935 + Call Stack + Locals + + 133 133 133 + + + 2506 + Trace Data + + 75 135 130 95 70 230 200 150 + + + + + + 1 + 1 + 0 + 0 + -1 + + + + + + + 44 + 2 + 3 + + -32000 + -32000 + + + -1 + -1 + + + 37 + 599 + 1494 + 828 + + + + 0 + + 60 + 010000000400000001000000010000000100000001000000000000000200000000000000010000000100000000000000280000002800000000000000 + + + + 0 + Build + + -1 + -1 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 940100004F00000070040000BD000000 + + + 16 + 940100006600000070040000D4000000 + + + + 1005 + 1005 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D010000F5020000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 109 + 109 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D010000F5020000 + + + 16 + 220000003900000005010000F5010000 + + + + 1465 + 1465 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1466 + 1466 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1467 + 1467 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1468 + 1468 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1506 + 1506 + 0 + 0 + 0 + 0 + 32767 + 0 + 16384 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 1913 + 1913 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1935 + 1935 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 1936 + 1936 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 1937 + 1937 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 1939 + 1939 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1940 + 1940 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1941 + 1941 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 1942 + 1942 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 195 + 195 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D010000F5020000 + + + 16 + 220000003900000005010000F5010000 + + + + 196 + 196 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D010000F5020000 + + + 16 + 220000003900000005010000F5010000 + + + + 197 + 197 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 00000000B4020000000600000E030000 + + + 16 + 22000000390000005A020000A7000000 + + + + 198 + 198 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 00000000950100007004000017020000 + + + 16 + 22000000390000005A020000A7000000 + + + + 199 + 199 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000B7020000FD050000F5020000 + + + 16 + 22000000390000005A020000A7000000 + + + + 203 + 203 + 0 + 0 + 0 + 0 + 32767 + 0 + 8192 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + 22000000390000005A020000A7000000 + + + + 204 + 204 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + 22000000390000005A020000A7000000 + + + + 221 + 221 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000000000000000000000000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2506 + 2506 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 2507 + 2507 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 22000000390000005A020000A7000000 + + + + 343 + 343 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + 22000000390000005A020000A7000000 + + + + 346 + 346 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + 22000000390000005A020000A7000000 + + + + 35824 + 35824 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + 22000000390000005A020000A7000000 + + + + 35885 + 35885 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35886 + 35886 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35887 + 35887 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35888 + 35888 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35889 + 35889 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35890 + 35890 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35891 + 35891 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35892 + 35892 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35893 + 35893 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35894 + 35894 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35895 + 35895 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35896 + 35896 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35897 + 35897 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35898 + 35898 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35899 + 35899 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35900 + 35900 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35901 + 35901 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35902 + 35902 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35903 + 35903 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35904 + 35904 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 35905 + 35905 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 38003 + 38003 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D010000F5020000 + + + 16 + 220000003900000005010000F5010000 + + + + 38007 + 38007 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000B7020000FD050000F5020000 + + + 16 + 22000000390000005A020000A7000000 + + + + 436 + 436 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000B7020000FD050000F5020000 + + + 16 + 220000003900000005010000F5010000 + + + + 437 + 437 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 440 + 440 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000AC0100006D040000FE010000 + + + 16 + 2200000039000000B2010000C9010000 + + + + 59392 + 59392 + 1 + 0 + 0 + 0 + 940 + 0 + 8192 + 0 + + 16 + 0000000000000000B70300001C000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59393 + 0 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 000000000E0300000006000021030000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59399 + 59399 + 1 + 0 + 0 + 0 + 463 + 0 + 8192 + 1 + + 16 + 000000001C000000DA01000038000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59400 + 59400 + 0 + 0 + 0 + 0 + 612 + 0 + 8192 + 2 + + 16 + 00000000380000006F02000054000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2619 + 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 + + + 59392 + File + + 2346 + 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 + + + 1423 + 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 + + + 1423 + 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 + + + + 59399 + Build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ebug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ebug + + -1 + -1 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 940100004F00000000060000BD000000 + + + 16 + 940100006600000070040000D4000000 + + + + 1005 + 1005 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100006F020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 109 + 109 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D01000078010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 1465 + 1465 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A3020000FD050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1466 + 1466 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1467 + 1467 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1468 + 1468 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1506 + 1506 + 0 + 0 + 0 + 0 + 32767 + 0 + 16384 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1913 + 1913 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1935 + 1935 + 1 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 07030000A3020000FD050000F5020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1936 + 1936 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1937 + 1937 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 1939 + 1939 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1940 + 1940 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1941 + 1941 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 1942 + 1942 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 195 + 195 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D01000078010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 196 + 196 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D01000078010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 197 + 197 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 198 + 198 + 1 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 000000008C020000000300000E030000 + + + 16 + BE000000D5000000F602000043010000 + + + + 199 + 199 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 203 + 203 + 1 + 0 + 0 + 0 + 32767 + 0 + 8192 + 0 + + 16 + 940100006300000000060000BD000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 204 + 204 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 221 + 221 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000000000000000000000000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2506 + 2506 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 2507 + 2507 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D5000000F602000043010000 + + + + 343 + 343 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 346 + 346 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 35824 + 35824 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 97010000660000006D040000A4000000 + + + 16 + BE000000D5000000F602000043010000 + + + + 35885 + 35885 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35886 + 35886 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35887 + 35887 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35888 + 35888 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35889 + 35889 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35890 + 35890 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35891 + 35891 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35892 + 35892 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35893 + 35893 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35894 + 35894 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35895 + 35895 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35896 + 35896 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35897 + 35897 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35898 + 35898 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35899 + 35899 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35900 + 35900 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35901 + 35901 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35902 + 35902 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35903 + 35903 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35904 + 35904 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 35905 + 35905 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + E3020000660000006D0400008C010000 + + + 16 + BE000000D50000004E02000065020000 + + + + 38003 + 38003 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000660000008D0100006F020000 + + + 16 + BE000000D5000000A101000091020000 + + + + 38007 + 38007 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000F602000043010000 + + + + 436 + 436 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000C00100006D040000FE010000 + + + 16 + BE000000D5000000A101000091020000 + + + + 437 + 437 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 440 + 440 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 07030000A302000035050000F5020000 + + + 16 + BE000000D50000004E02000065020000 + + + + 59392 + 59392 + 1 + 0 + 0 + 0 + 940 + 0 + 8192 + 0 + + 16 + 0000000000000000B70300001C000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59393 + 0 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 000000000E0300000006000021030000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59399 + 59399 + 0 + 0 + 0 + 0 + 463 + 0 + 8192 + 1 + + 16 + 000000001C000000DA01000038000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59400 + 59400 + 1 + 0 + 0 + 0 + 612 + 0 + 8192 + 2 + + 16 + 000000001C0000006F02000038000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2618 + 000000000B000000000000000020000001000000FFFFFFFFFFFFFFFF94010000BD00000000060000C1000000010000000100000004000000010000000000000000000000FFFFFFFF06000000CB00000057010000CC000000F08B00005A01000079070000FFFF02000B004354616262656450616E650020000001000000940100006600000070040000D4000000940100004F00000000060000BD0000000000000040280056060000000B446973617373656D626C7901000000CB00000001000000FFFFFFFFFFFFFFFF14506572666F726D616E636520416E616C797A6572000000005701000001000000FFFFFFFFFFFFFFFF14506572666F726D616E636520416E616C797A657200000000CC00000001000000FFFFFFFFFFFFFFFF0E4C6F67696320416E616C797A657200000000F08B000001000000FFFFFFFFFFFFFFFF0D436F646520436F766572616765000000005A01000001000000FFFFFFFFFFFFFFFF11496E737472756374696F6E205472616365000000007907000001000000FFFFFFFFFFFFFFFF00000000000000000000000000000000000000000000000001000000FFFFFFFFCB00000001000000FFFFFFFFCB000000000000000040000000000000FFFFFFFFFFFFFFFFDC0200004F000000E0020000A5010000000000000200000004000000010000000000000000000000FFFFFFFF17000000E2050000CA0900002D8C00002E8C00002F8C0000308C0000318C0000328C0000338C0000348C0000358C0000368C0000378C0000388C0000398C00003A8C00003B8C00003C8C00003D8C00003E8C00003F8C0000408C0000418C000001800040000000000000E00200006600000070040000BC010000E00200004F00000070040000A50100000000000040410046170000000753796D626F6C7300000000E205000001000000FFFFFFFFFFFFFFFF0A5472616365204461746100000000CA09000001000000FFFFFFFFFFFFFFFF00000000002D8C000001000000FFFFFFFFFFFFFFFF00000000002E8C000001000000FFFFFFFFFFFFFFFF00000000002F8C000001000000FFFFFFFFFFFFFFFF0000000000308C000001000000FFFFFFFFFFFFFFFF0000000000318C000001000000FFFFFFFFFFFFFFFF0000000000328C000001000000FFFFFFFFFFFFFFFF0000000000338C000001000000FFFFFFFFFFFFFFFF0000000000348C000001000000FFFFFFFFFFFFFFFF0000000000358C000001000000FFFFFFFFFFFFFFFF0000000000368C000001000000FFFFFFFFFFFFFFFF0000000000378C000001000000FFFFFFFFFFFFFFFF0000000000388C000001000000FFFFFFFFFFFFFFFF0000000000398C000001000000FFFFFFFFFFFFFFFF00000000003A8C000001000000FFFFFFFFFFFFFFFF00000000003B8C000001000000FFFFFFFFFFFFFFFF00000000003C8C000001000000FFFFFFFFFFFFFFFF00000000003D8C000001000000FFFFFFFFFFFFFFFF00000000003E8C000001000000FFFFFFFFFFFFFFFF00000000003F8C000001000000FFFFFFFFFFFFFFFF0000000000408C000001000000FFFFFFFFFFFFFFFF0000000000418C000001000000FFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000001000000FFFFFFFFE205000001000000FFFFFFFFE2050000000000000010000001000000FFFFFFFFFFFFFFFF900100004F0000009401000088020000010000000200000004000000010000000000000000000000FFFFFFFF05000000ED0300006D000000C3000000C40000007394000001800010000001000000000000006600000090010000A8010000000000004F00000090010000880200000000000040410056050000000750726F6A65637401000000ED03000001000000FFFFFFFFFFFFFFFF05426F6F6B73000000006D00000001000000FFFFFFFFFFFFFFFF0946756E6374696F6E7300000000C300000001000000FFFFFFFFFFFFFFFF0954656D706C6174657300000000C400000001000000FFFFFFFFFFFFFFFF09526567697374657273010000007394000001000000FFFFFFFFFFFFFFFF04000000000000000000000000000000000000000000000001000000FFFFFFFFED03000001000000FFFFFFFFED030000000000000080000001000000FFFFFFFFFFFFFFFF0000000088020000000600008C02000001000000010000000400000001000000000000000000000000000000000000000000000001000000C6000000FFFFFFFF0E0000008F070000930700009407000095070000960700009007000091070000B5010000B8010000B9050000BA050000BB050000BC050000CB090000018000800000010000003C020000AC010000700400002E020000040300008C020000000600000E03000000000000404100560E0000001343616C6C20537461636B202B204C6F63616C73010000008F07000001000000FFFFFFFFFFFFFFFF0755415254202331000000009307000001000000FFFFFFFFFFFFFFFF0755415254202332000000009407000001000000FFFFFFFFFFFFFFFF0755415254202333000000009507000001000000FFFFFFFFFFFFFFFF15446562756720287072696E74662920566965776572000000009607000001000000FFFFFFFFFFFFFFFF0757617463682031000000009007000001000000FFFFFFFFFFFFFFFF0757617463682032000000009107000001000000FFFFFFFFFFFFFFFF10547261636520457863657074696F6E7300000000B501000001000000FFFFFFFFFFFFFFFF0E4576656E7420436F756E7465727300000000B801000001000000FFFFFFFFFFFFFFFF084D656D6F7279203101000000B905000001000000FFFFFFFFFFFFFFFF084D656D6F7279203200000000BA05000001000000FFFFFFFFFFFFFFFF084D656D6F7279203300000000BB05000001000000FFFFFFFFFFFFFFFF084D656D6F7279203400000000BC05000001000000FFFFFFFFFFFFFFFF105472616365204E617669676174696F6E00000000CB09000001000000FFFFFFFFFFFFFFFF000000000000000001000000000000000100000001000000FFFFFFFF000300008C020000040300000E03000001000000020000000400000000000000000000000000000000000000000000000000000002000000C6000000FFFFFFFF8F07000001000000FFFFFFFF8F07000001000000C6000000000000000080000000000000FFFFFFFFFFFFFFFF00000000A501000070040000A9010000000000000100000004000000010000000000000000000000FFFFFFFF04000000C5000000C7000000B4010000779400000180008000000000000000000000C0010000700400002E02000000000000A901000070040000170200000000000040820046040000000C4275696C64204F757470757400000000C500000001000000FFFFFFFFFFFFFFFF0D46696E6420496E2046696C657300000000C700000001000000FFFFFFFFFFFFFFFF0A4572726F72204C69737400000000B401000001000000FFFFFFFFFFFFFFFF0642726F777365000000007794000001000000FFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000001000000FFFFFFFFC500000001000000FFFFFFFFC5000000000000000000000000000000 + + + 59392 + File + + 2346 + 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 + + + 1423 + 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 + + + 1423 + 2800FFFF01001100434D4643546F6F6C426172427574746F6E00E100000000000000000000000000000000000000000000000100000001000000018001E100000000000001000000000000000000000000000000000100000001000000018003E1000000000000020000000000000000000000000000000001000000010000000180CD7F0000000000000300000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018023E100000000000004000000000000000000000000000000000100000001000000018022E100000000000005000000000000000000000000000000000100000001000000018025E10000000000000600000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001802BE10000000000000700000000000000000000000000000000010000000100000001802CE10000000000000800000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001807A8A0000000000000900000000000000000000000000000000010000000100000001807B8A0000000000000A00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180D3B00000000000000B000000000000000000000000000000000100000001000000018015B10000000000000C0000000000000000000000000000000001000000010000000180F4B00000000000000D000000000000000000000000000000000100000001000000018036B10000000000000E00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FF880000000000000F0000000000000000000000000000000001000000010000000180FE880000000000001000000000000000000000000000000000010000000100000001800B810000000000001100000000000000000000000000000000010000000100000001800C810000000000001200000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180F088000000000000130000000000000000000000000000000001000000010000000180EE7F00000000000014000000000000000000000000000000000100000001000000018024E10000000000001500000000000000000000000000000000010000000100000001800A810000000000001600000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018022800000000000001700000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180C488000000000000180000000000000000000000000000000001000000010000000180C988000000000000190000000000000000000000000000000001000000010000000180C7880000000000001A0000000000000000000000000000000001000000010000000180C8880000000000001B00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180DD880000000000001C00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FB7F0000000000001D000000000000000000000000000000000100000001000000 + + + + 59399 + Build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ebug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diff --git a/bsp/gd32105c-eval/template.uvoptx b/bsp/gd32105c-eval/template.uvoptx new file mode 100644 index 0000000000000000000000000000000000000000..f9ac66a05adfe2ee2fbb5ea97fab60bba76fa479 --- /dev/null +++ b/bsp/gd32105c-eval/template.uvoptx @@ -0,0 +1,163 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread_gd32f105 + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\list\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + 1 + 0 + 0 + 6 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U58001139 -O14 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(4BA00477) -L00(4) -N01("Unknown JTAG device") -D01(790007A3) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC1000 -FN1 -FF0GD32F10x_CL -FS08000000 -FL0300000 -FP0($$Device:GD32F105VC$Flash\GD32F10x_CL.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0GD32F10x_CL -FL040000 -FS08000000 -FP0($$Device:GD32F105VC$Flash\GD32F10x_CL.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + diff --git a/bsp/gd32105c-eval/template.uvprojx b/bsp/gd32105c-eval/template.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..88f1e752206fd039f9f1c1b765d819781ef5fb20 --- /dev/null +++ b/bsp/gd32105c-eval/template.uvprojx @@ -0,0 +1,410 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread_gd32f105 + 0x4 + ARM-ADS + + + GD32F105VC + GigaDevice + GigaDevice.GD32F10x_DFP.2.0.1 + http://www.keil.com/pack/ + IRAM(0x20000000,0x00018000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0GD32F10x_CL -FS08000000 -FL040000 -FP0($$Device:GD32F105VC$Flash\GD32F10x_CL.FLM)) + 0 + $$Device:GD32F105VC$Device\Include\gd32f10x.h + + + + + + + + + + $$Device:GD32F105VC$SVD\GD32F10x\GD32F10x_CL.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\output\ + Project + 1 + 0 + 1 + 1 + 1 + .\list\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP + DCM.DLL + -pCM3 + SARMCM3.DLL + + TCM.DLL + -pCM3 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + + 0 + 6 + + + + + + + + + + + + + + Segger\JL2CM3.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x18000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x18000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 0 + 0 + + + + + ..\..\..\..\GD32F10x_Firmware_Library\CMSIS;..\..\..\..\GD32F10x_Firmware_Library\CMSIS\GD\GD32F10x\Include;..\..\..\..\GD32F10x_Firmware_Library\GD32F10x_standard_peripheral\Include;..\..\..\Utilities;..\ + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + +