diff --git a/bsp/raspberry-pi/raspi4-32/.config b/bsp/raspberry-pi/raspi4-32/.config
new file mode 100644
index 0000000000000000000000000000000000000000..9194a7dc7f9ce6e0822b308763b55b500b50a7bc
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/.config
@@ -0,0 +1,453 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Project Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=2048
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=2048
+CONFIG_RT_DEBUG=y
+# CONFIG_RT_DEBUG_COLOR is not set
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+# CONFIG_RT_USING_MEMHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart"
+CONFIG_RT_VER_NUM=0x40003
+# CONFIG_RT_USING_CPU_FFS is not set
+CONFIG_ARCH_ARMV8=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+# CONFIG_FINSH_USING_MSH_ONLY is not set
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+CONFIG_RT_USING_DFS=y
+CONFIG_DFS_USING_WORKDIR=y
+CONFIG_DFS_FILESYSTEMS_MAX=2
+CONFIG_DFS_FILESYSTEM_TYPES_MAX=2
+CONFIG_DFS_FD_MAX=16
+# CONFIG_RT_USING_DFS_MNTTABLE is not set
+# CONFIG_RT_USING_DFS_ELMFAT is not set
+CONFIG_RT_USING_DFS_DEVFS=y
+# CONFIG_RT_USING_DFS_ROMFS is not set
+# CONFIG_RT_USING_DFS_RAMFS is not set
+# CONFIG_RT_USING_DFS_UFFS is not set
+# CONFIG_RT_USING_DFS_JFFS2 is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_SERIAL_USING_DMA=y
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+CONFIG_RT_USING_LIBC=y
+# CONFIG_RT_USING_PTHREADS is not set
+CONFIG_RT_USING_POSIX=y
+# CONFIG_RT_USING_POSIX_MMAP is not set
+# CONFIG_RT_USING_POSIX_TERMIOS is not set
+# CONFIG_RT_USING_POSIX_AIO is not set
+# CONFIG_RT_USING_MODULE is not set
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_URLENCODE is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_FLASHDB is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_UKAL is not set
+CONFIG_BCM2711_SOC=y
+# CONFIG_BSP_SUPPORT_FPU is not set
+
+#
+# Hardware Drivers Config
+#
+
+#
+# BCM Peripheral Drivers
+#
+CONFIG_BSP_USING_UART=y
+CONFIG_RT_USING_UART0=y
+CONFIG_BSP_USING_GIC=y
+CONFIG_BSP_USING_GIC400=y
+# CONFIG_BSP_USING_GIC500 is not set
+CONFIG_BSP_USING_PIN=y
+CONFIG_BSP_USING_CORETIMER=y
+# CONFIG_BSP_USING_SYSTIMER is not set
+# CONFIG_BSP_USING_WDT is not set
+# CONFIG_BSP_USING_RTC is not set
+# CONFIG_BSP_USING_SDIO is not set
+
+#
+# Board Peripheral Drivers
+#
+# CONFIG_BSP_USING_HDMI is not set
diff --git a/bsp/raspberry-pi/raspi4-32/Kconfig b/bsp/raspberry-pi/raspi4-32/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..1e49c4768057b5c709aa6388681959b4e6f8537f
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/Kconfig
@@ -0,0 +1,28 @@
+mainmenu "RT-Thread Project Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+
+config BCM2711_SOC
+    bool
+    select ARCH_ARMV8
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+source "driver/Kconfig"
diff --git a/bsp/raspberry-pi/raspi4-32/README.md b/bsp/raspberry-pi/raspi4-32/README.md
new file mode 100644
index 0000000000000000000000000000000000000000..52baca8047b8740d2e8c8582ec05754f05e00b6e
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/README.md
@@ -0,0 +1,79 @@
+# Raspberry PI 4板级支持包说明
+
+## 1. 简介
+
+树莓派4B的核心处理器为博通BCM2711（四核1.5GHz，Cortex A72架构，树莓派3是四核A53）。LPDDR4内存，由5V/3A USB-C供电或GPIO 5V。
+
+外设支持上，引入了双频Wi-Fi，蓝牙5.0，千兆网卡，MIPI CSI相机接口，两个USB口，40个扩展帧。
+
+这份RT-Thread BSP是针对 Raspberry Pi 4的一份移植，树莓派价格便宜, 使用者甚众，是研究和运行RT-Thread的可选平台之一。
+
+
+## 2. 编译说明
+
+推荐使用[env工具](https://www.rt-thread.org/page/download.html)，可以在console下进入到`bsp\raspberry-pi\raspi4-32`目录中，运行以下命令：
+
+```
+scons
+```
+
+来编译这个板级支持包。如果编译正确无误，会产生rtthread.elf、kernel7.img文件。
+
+
+## 3. 执行
+
+### 3.1 下载**Raspberry Pi Imager**，生成可以运行的raspbian SD卡
+
+首先下载镜像
+
+* [Raspberry Pi Imager for Ubuntu](https://downloads.raspberrypi.org/imager/imager_amd64.deb)
+* [Raspberry Pi Imager for Windows](https://downloads.raspberrypi.org/imager/imager.exe)
+* [Raspberry Pi Imager for macOS](https://downloads.raspberrypi.org/imager/imager.dmg)
+
+### 3.2 准备好串口线
+
+目前版本是使用raspi4的 GPIO 14, GPIO 15来作路口输出，连线情况如下图所示：
+
+![raspi2](../raspi3-32/figures/raspberrypi-console.png)
+
+串口参数： 115200 8N1 ，硬件和软件流控为关。
+
+### 3.3 程序下载
+
+当编译生成了rtthread.bin文件后，我们可以将该文件放到sd卡上，并修改sd卡中的`config.txt`文件如下：
+
+```
+enable_uart=1
+arm_64bit=0
+kernel_addr=0x8000
+kernel=kernel7.img
+```
+
+按上面的方法做好SD卡后，插入树莓派4，通电可以在串口上看到如下所示的输出信息：
+
+```text
+heap: 0x00044270 - 0x04044270
+
+ \ | /
+- RT -     Thread Operating System
+ / | \     4.0.3 build May 25 2020
+ 2006 - 2020 Copyright by rt-thread team
+Hi, this is RT-Thread!!
+msh />
+```
+
+## 4. 支持情况
+
+| 驱动 | 支持情况  |  备注  |
+| ------ | ----  | :------:  |
+| UART | 支持 | UART0|
+
+## 5. 联系人信息
+
+维护人：[bernard][5]
+
+[1]: https://www.rt-thread.org/page/download.html
+[2]: https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads
+[3]: https://downloads.raspberrypi.org/raspbian_lite_latest
+[4]: https://etcher.io
+[5]: https://github.com/BernardXiong
diff --git a/bsp/raspberry-pi/raspi4-32/SConscript b/bsp/raspberry-pi/raspi4-32/SConscript
new file mode 100644
index 0000000000000000000000000000000000000000..c7ef7659ecea92b1dd9b71a97736a8552ee02551
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/SConscript
@@ -0,0 +1,14 @@
+# for module compiling
+import os
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')
diff --git a/bsp/raspberry-pi/raspi4-32/SConstruct b/bsp/raspberry-pi/raspi4-32/SConstruct
new file mode 100644
index 0000000000000000000000000000000000000000..93f349aab8045ad3c742e72664514a7c240b2b6e
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/SConstruct
@@ -0,0 +1,30 @@
+import os
+import sys
+import rtconfig
+
+from rtconfig import RTT_ROOT
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+from building import *
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+env['ASCOM'] = env['ASPPCOM']
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu = False)
+
+# make a building
+DoBuilding(TARGET, objs)
+
diff --git a/bsp/raspberry-pi/raspi4-32/applications/SConscript b/bsp/raspberry-pi/raspi4-32/applications/SConscript
new file mode 100644
index 0000000000000000000000000000000000000000..533df8ac31d12aaf4a835cde3a1554d8d65d955a
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/applications/SConscript
@@ -0,0 +1,9 @@
+from building import *
+
+cwd     = GetCurrentDir()
+src     = Glob('*.c') + Glob('*.cpp')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
diff --git a/bsp/raspberry-pi/raspi4-32/applications/main.c b/bsp/raspberry-pi/raspi4-32/applications/main.c
new file mode 100644
index 0000000000000000000000000000000000000000..9664e67d01d0e45ad84ec3aa9e3ee72edf26c950
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/applications/main.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2020-04-16     bigmagic       first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+int main(int argc, char** argv)
+{
+    rt_kprintf("Hi, this is RT-Thread!!\n");
+    return 0;
+}
diff --git a/bsp/raspberry-pi/raspi4-32/driver/Kconfig b/bsp/raspberry-pi/raspi4-32/driver/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..208b4b43000a16ecb3a10c0f2edc1e9de1f1c76e
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/Kconfig
@@ -0,0 +1,97 @@
+
+config BSP_SUPPORT_FPU
+    bool "Using Float"
+    default n
+
+menu "Hardware Drivers Config"
+    menu "BCM Peripheral Drivers"
+        menuconfig BSP_USING_UART
+            bool "Using UART"
+            select RT_USING_SERIAL
+            default y
+
+            if BSP_USING_UART
+                config RT_USING_UART0
+                bool "Enabel UART 0"
+                default y
+            endif
+            
+        menuconfig BSP_USING_GIC
+            bool "Enable GIC"
+            select RT_USING_GIC
+            default y
+        if BSP_USING_GIC
+            config BSP_USING_GIC400
+                bool "Enable GIC400"
+                default y
+            config BSP_USING_GIC500
+                bool "Enable GIC500"
+                default n
+        endif
+
+        config BSP_USING_PIN
+            bool "Using PIN"
+            select RT_USING_PIN
+            default y
+
+        config BSP_USING_CORETIMER
+            bool "Using core timer"
+            select RT_USING_CORETIMER
+            default y
+
+        menuconfig BSP_USING_SYSTIMER
+            bool "Enable SYSTIMER"
+            select BSP_USING_SYSTIMER
+            default n
+
+        if  BSP_USING_SYSTIMER
+            config RT_USING_SYSTIMER1
+                bool "Enable sys timer1"
+                default n
+            config RT_USING_SYSTIMER3
+                bool "Enable sys timer3"
+                default n
+        endif
+
+        config BSP_USING_WDT
+            bool "Enable WDT"
+            select RT_USING_WDT
+            default n
+
+        menuconfig BSP_USING_RTC
+            bool "Enable RTC"
+            select RT_USING_RTC
+            default n
+
+        if BSP_USING_RTC
+            config BSP_USING_ALARM
+                bool "Enable Alarm"
+                select RT_USING_ALARM
+                default n
+        endif
+        
+        menuconfig BSP_USING_SDIO
+            bool "Enable SDIO"
+            select RT_USING_SDIO
+            default n
+
+        if BSP_USING_SDIO
+            config BSP_USING_SDIO0
+                bool "Enable SDIO0"
+                select RT_USING_SDIO
+                default n
+        endif
+    endmenu
+
+    menu "Board Peripheral Drivers"
+        menuconfig BSP_USING_HDMI
+            bool "Enable HDMI"
+            default n
+
+        if BSP_USING_HDMI
+            config BSP_USING_HDMI_DISPLAY
+                bool "HDMI DISPLAY"
+                default n
+        endif
+    endmenu
+endmenu
diff --git a/bsp/raspberry-pi/raspi4-32/driver/SConscript b/bsp/raspberry-pi/raspi4-32/driver/SConscript
new file mode 100644
index 0000000000000000000000000000000000000000..533df8ac31d12aaf4a835cde3a1554d8d65d955a
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/SConscript
@@ -0,0 +1,9 @@
+from building import *
+
+cwd     = GetCurrentDir()
+src     = Glob('*.c') + Glob('*.cpp')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
diff --git a/bsp/raspberry-pi/raspi4-32/driver/board.c b/bsp/raspberry-pi/raspi4-32/driver/board.c
new file mode 100644
index 0000000000000000000000000000000000000000..7a3524126dc11792732a8e960ecf05b4a16fdf46
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/board.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2020-04-16     bigmagic       first version
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+#include "drv_uart.h"
+
+#include "cp15.h"
+#include "mmu.h"
+
+struct mem_desc platform_mem_desc[] = {
+    {0x0, 0x6400000, 0x0, NORMAL_MEM},
+    {0xFE000000, 0xFE400000, 0xFE000000, DEVICE_MEM},//uart gpio
+    {0xFF800000, 0xFFA00000, 0xFF800000, DEVICE_MEM} //gic
+};
+
+const rt_uint32_t platform_mem_desc_size = sizeof(platform_mem_desc)/sizeof(platform_mem_desc[0]);
+
+void rt_hw_timer_isr(int vector, void *parameter)
+{
+    ARM_TIMER_IRQCLR = 0;
+    rt_tick_increase();
+}
+
+void rt_hw_timer_init(void)
+{
+    rt_hw_interrupt_install(ARM_TIMER_IRQ, rt_hw_timer_isr, RT_NULL, "tick");
+    rt_hw_interrupt_umask(ARM_TIMER_IRQ);
+    /* timer_clock = apb_clock/(pre_divider + 1) */
+    ARM_TIMER_PREDIV = (250 - 1);
+
+    ARM_TIMER_RELOAD = 0;
+    ARM_TIMER_LOAD   = 0;
+    ARM_TIMER_IRQCLR = 0;
+    ARM_TIMER_CTRL   = 0;
+
+    ARM_TIMER_RELOAD = 10000;
+    ARM_TIMER_LOAD   = 10000;
+
+    /* 23-bit counter, enable interrupt, enable timer */
+    ARM_TIMER_CTRL   = (1 << 1) | (1 << 5) | (1 << 7);
+}
+
+void idle_wfi(void)
+{
+    asm volatile ("wfi");
+}
+
+/**
+ *  Initialize the Hardware related stuffs. Called from rtthread_startup() 
+ *  after interrupt disabled.
+ */
+void rt_hw_board_init(void)
+{
+    /* initialize hardware interrupt */
+    rt_hw_interrupt_init();
+    /* initialize uart */
+    rt_hw_uart_init();      // driver/drv_uart.c
+#ifdef RT_USING_CONSOLE
+    /* set console device */
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif /* RT_USING_CONSOLE */
+
+#ifdef RT_USING_HEAP
+    /* initialize memory system */
+    rt_kprintf("heap: 0x%08x - 0x%08x\n", RT_HW_HEAP_BEGIN, RT_HW_HEAP_END);
+    rt_system_heap_init(RT_HW_HEAP_BEGIN, RT_HW_HEAP_END);
+#endif
+        /* initialize timer for os tick */
+    rt_hw_timer_init();
+    rt_thread_idle_sethook(idle_wfi);
+
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+}
diff --git a/bsp/raspberry-pi/raspi4-32/driver/board.h b/bsp/raspberry-pi/raspi4-32/driver/board.h
new file mode 100644
index 0000000000000000000000000000000000000000..d675cc658e06c599df8007db4e67e608afa7a45a
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/board.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2020-04-16     bigmagic       first version
+ */
+
+#ifndef BOARD_H__
+#define BOARD_H__
+
+#include <stdint.h>
+#include "raspi4.h"
+
+extern unsigned char __bss_start;
+extern unsigned char __bss_end;
+
+#define RT_HW_HEAP_BEGIN    (void*)&__bss_end
+#define RT_HW_HEAP_END      (void*)(RT_HW_HEAP_BEGIN + 64 * 1024 * 1024)
+
+void rt_hw_board_init(void);
+
+#endif
diff --git a/bsp/raspberry-pi/raspi4-32/driver/drv_gpio.c b/bsp/raspberry-pi/raspi4-32/driver/drv_gpio.c
new file mode 100644
index 0000000000000000000000000000000000000000..4317a358e0fa59b77a5ff4996bd340bc93821403
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/drv_gpio.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2020-04-16     bigmagic       first version
+ */
+
+#include "drv_gpio.h"
+
+#ifdef BSP_USING_PIN
+
+static void raspi_pin_mode(struct rt_device *dev, rt_base_t pin, rt_base_t mode)
+{
+    uint32_t fselnum = pin / 10;
+    uint32_t fselrest = pin % 10;
+
+    uint32_t gpfsel = 0;
+    gpfsel &= ~((uint32_t)(0x07 << (fselrest * 3)));
+    gpfsel |= (uint32_t)(mode << (fselrest * 3));
+
+    switch (fselnum)
+    {
+    case 0:
+        GPIO_REG_GPFSEL0(GPIO_BASE) = gpfsel;
+        break;
+    case 1:
+        GPIO_REG_GPFSEL1(GPIO_BASE) = gpfsel;
+        break;
+    case 2:
+        GPIO_REG_GPFSEL2(GPIO_BASE) = gpfsel;
+        break;
+    case 3:
+        GPIO_REG_GPFSEL3(GPIO_BASE) = gpfsel;
+        break;
+    case 4:
+        GPIO_REG_GPFSEL4(GPIO_BASE) = gpfsel;
+        break;
+    case 5:
+        GPIO_REG_GPFSEL5(GPIO_BASE) = gpfsel;
+        break;
+    default:
+        break;
+    }
+}
+
+static void raspi_pin_write(struct rt_device *dev, rt_base_t pin, rt_base_t value)
+{
+    uint32_t num = pin / 32;
+
+    if(num == 0)
+    {
+        if(value == 0)
+        {
+            GPIO_REG_GPSET0(GPIO_BASE) = 1 << (pin % 32);
+        }
+        else
+        {
+            GPIO_REG_GPCLR0(GPIO_BASE) = 1 << (pin % 32);
+        }
+    }
+    else
+    {
+        if(value == 0)
+        {
+            GPIO_REG_GPSET1(GPIO_BASE) = 1 << (pin % 32);
+        }
+        else
+        {
+            GPIO_REG_GPCLR1(GPIO_BASE) = 1 << (pin % 32);
+        }
+        
+    }
+}
+
+static int raspi_pin_read(struct rt_device *device, rt_base_t pin)
+{
+    return 0;
+}
+
+static rt_err_t raspi_pin_attach_irq(struct rt_device *device, rt_int32_t pin, rt_uint32_t mode, void (*hdr)(void *args), void *args)
+{
+    return RT_EOK;
+}
+
+static rt_err_t raspi_pin_detach_irq(struct rt_device *device, rt_int32_t pin)
+{
+    return RT_EOK;
+}
+
+rt_err_t raspi_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_t enabled)
+{
+    return RT_EOK;
+}
+
+static const struct rt_pin_ops ops =
+{
+    raspi_pin_mode,
+    raspi_pin_write,
+    raspi_pin_read,
+    raspi_pin_attach_irq,
+    raspi_pin_detach_irq,
+    raspi_pin_irq_enable,
+};
+#endif
+
+int rt_hw_gpio_init(void)
+{
+#ifdef BSP_USING_PIN
+    rt_device_pin_register("gpio", &ops, RT_NULL);
+#endif
+
+    return 0;
+}
+INIT_DEVICE_EXPORT(rt_hw_gpio_init);
diff --git a/bsp/raspberry-pi/raspi4-32/driver/drv_gpio.h b/bsp/raspberry-pi/raspi4-32/driver/drv_gpio.h
new file mode 100644
index 0000000000000000000000000000000000000000..c4658fcebbaf27ea0833b8f2c41ba7a55d1e312f
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/drv_gpio.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2020-04-16     bigmagic       first version
+ */
+
+#ifndef __DRV_GPIO_H__
+#define __DRV_GPIO_H__
+
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#include "board.h"
+#include "interrupt.h"
+
+#define GPIO_REG_GPFSEL0(BASE)             HWREG32(BASE + 0x00)
+#define GPIO_REG_GPFSEL1(BASE)             HWREG32(BASE + 0x04)
+#define GPIO_REG_GPFSEL2(BASE)             HWREG32(BASE + 0x08)
+#define GPIO_REG_GPFSEL3(BASE)             HWREG32(BASE + 0x0C)
+#define GPIO_REG_GPFSEL4(BASE)             HWREG32(BASE + 0x10)
+#define GPIO_REG_GPFSEL5(BASE)             HWREG32(BASE + 0x14)
+#define GPIO_REG_REV0(BASE)                HWREG32(BASE + 0x18)
+#define GPIO_REG_GPSET0(BASE)              HWREG32(BASE + 0x1C)
+#define GPIO_REG_GPSET1(BASE)              HWREG32(BASE + 0x20)
+#define GPIO_REG_REV1(BASE)                HWREG32(BASE + 0x24)
+#define GPIO_REG_GPCLR0(BASE)              HWREG32(BASE + 0x28)
+#define GPIO_REG_GPCLR1(BASE)              HWREG32(BASE + 0x2C)
+#define GPIO_REG_REV2(BASE)                HWREG32(BASE + 0x30)
+#define GPIO_REG_GPLEV0(BASE)              HWREG32(BASE + 0x34)
+#define GPIO_REG_GPLEV1(BASE)              HWREG32(BASE + 0x38)
+#define GPIO_REG_REV3(BASE)                HWREG32(BASE + 0x3C)
+#define GPIO_REG_GPEDS0(BASE)              HWREG32(BASE + 0x40)
+#define GPIO_REG_GPEDS1(BASE)              HWREG32(BASE + 0x44)
+#define GPIO_REG_REV4(BASE)                HWREG32(BASE + 0x48)
+#define GPIO_REG_GPREN0(BASE)              HWREG32(BASE + 0x4C)
+#define GPIO_REG_GPREN1(BASE)              HWREG32(BASE + 0x50)
+#define GPIO_REG_REV5(BASE)                HWREG32(BASE + 0x54)
+#define GPIO_REG_GPFEN0(BASE)              HWREG32(BASE + 0x58)
+#define GPIO_REG_GPFEN1(BASE)              HWREG32(BASE + 0x5C)
+#define GPIO_REG_REV6(BASE)                HWREG32(BASE + 0x60)
+#define GPIO_REG_GPHEN0(BASE)              HWREG32(BASE + 0x64)
+#define GPIO_REG_GPHEN1(BASE)              HWREG32(BASE + 0x68)
+#define GPIO_REG_REV7(BASE)                HWREG32(BASE + 0x6C)
+#define GPIO_REG_GPLEN0(BASE)              HWREG32(BASE + 0x70)
+#define GPIO_REG_GPLEN1(BASE)              HWREG32(BASE + 0x74)
+#define GPIO_REG_REV8(BASE)                HWREG32(BASE + 0x78)
+#define GPIO_REG_GPAREN0(BASE)             HWREG32(BASE + 0x7C)
+#define GPIO_REG_GPAREN1(BASE)             HWREG32(BASE + 0x80)
+#define GPIO_REG_REV11(BASE)               HWREG32(BASE + 0x84)
+#define GPIO_REG_GPAFEN0(BASE)             HWREG32(BASE + 0x88)
+#define GPIO_REG_GPAFEN1(BASE)             HWREG32(BASE + 0x8C)
+#define GPIO_REG_REV10(BASE)               HWREG32(BASE + 0x90)
+#define GPIO_REG_GPPUD(BASE)               HWREG32(BASE + 0x94)
+#define GPIO_REG_GPPUDCLK0(BASE)           HWREG32(BASE + 0x98)
+#define GPIO_REG_GPPUDCLK1(BASE)           HWREG32(BASE + 0x9C)
+#define GPIO_REG_REV9(BASE)                HWREG32(BASE + 0xA0)
+#define GPIO_REG_TEST(BASE)                HWREG32(BASE + 0xA4)
+
+typedef enum {
+    INPUT = 0b000,
+    OUTPUT = 0b001,
+    ALT0 = 0b100,
+    ALT1 = 0b101,
+    ALT2 = 0b110,
+    ALT3 = 0b111,
+    ALT4 = 0b011,
+    ALT5 = 0b010
+} GPIO_FUNC;
+
+
+int rt_hw_gpio_init(void);
+
+#endif /* __DRV_GPIO_H__ */
diff --git a/bsp/raspberry-pi/raspi4-32/driver/drv_uart.c b/bsp/raspberry-pi/raspi4-32/driver/drv_uart.c
new file mode 100644
index 0000000000000000000000000000000000000000..6a70cdfb3a87dbaf1561cd7b1568d0b859d3b3bb
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/drv_uart.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2020-04-16     bigmagic       first version
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#include "board.h"
+#include "drv_uart.h"
+#include "drv_gpio.h"
+
+struct hw_uart_device
+{
+    rt_ubase_t hw_base;
+    rt_uint32_t irqno;
+};
+
+static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct hw_uart_device *uart;
+    uint32_t bauddiv = (UART_REFERENCE_CLOCK / cfg->baud_rate)* 1000 / 16;
+    uint32_t ibrd = bauddiv / 1000;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+    if(uart->hw_base == PL011_BASE)
+    {
+        uint32_t gpfsel = 0;
+
+        gpfsel &= ~((uint32_t)(0x07 << (4 * 3)));
+        gpfsel |= (uint32_t)(ALT0 << (4 * 3));
+        GPIO_REG_GPFSEL1(GPIO_BASE) = gpfsel;
+
+        gpfsel &= ~((uint32_t)(0x07 << (5 * 3)));
+        gpfsel |= (uint32_t)(ALT0 << (5 * 3));
+        GPIO_REG_GPFSEL1(GPIO_BASE) = gpfsel;
+
+        PL011_REG_CR(uart->hw_base) = 0;/*Clear UART setting*/
+        PL011_REG_LCRH(uart->hw_base) = 0;/*disable FIFO*/
+        PL011_REG_IBRD(uart->hw_base) = ibrd;
+        PL011_REG_FBRD(uart->hw_base) = (((bauddiv - ibrd * 1000) * 64 + 500) / 1000);
+        PL011_REG_LCRH(uart->hw_base) = PL011_LCRH_WLEN_8;/*FIFO*/
+        PL011_REG_CR(uart->hw_base) = PL011_CR_UARTEN | PL011_CR_TXE | PL011_CR_RXE;/*art enable, TX/RX enable*/
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct hw_uart_device *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+
+    switch (cmd)
+    {
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* disable rx irq */
+        PL011_REG_IMSC(uart->hw_base) &= ~((uint32_t)PL011_IMSC_RXIM);
+        rt_hw_interrupt_mask(uart->irqno);
+        break;
+
+    case RT_DEVICE_CTRL_SET_INT:
+        /* enable rx irq */
+        PL011_REG_IMSC(uart->hw_base) |= PL011_IMSC_RXIM;
+        rt_hw_interrupt_umask(uart->irqno);
+        break;
+    }
+
+    return RT_EOK;
+}
+
+static int uart_putc(struct rt_serial_device *serial, char c)
+{
+    struct hw_uart_device *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+
+    while ((PL011_REG_FR(uart->hw_base) & PL011_FR_TXFF));
+    PL011_REG_DR(uart->hw_base) = (uint8_t)c;
+
+    return 1;
+}
+
+static int uart_getc(struct rt_serial_device *serial)
+{
+    int ch = -1;
+    struct hw_uart_device *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+
+    if((PL011_REG_FR(uart->hw_base) & PL011_FR_RXFE) == 0)
+    {
+        ch = PL011_REG_DR(uart->hw_base) & 0xff;
+    }
+
+    return ch;
+}
+
+static const struct rt_uart_ops _uart_ops =
+{
+    uart_configure,
+    uart_control,
+    uart_putc,
+    uart_getc,
+};
+
+static void rt_hw_uart_isr(int irqno, void *param)
+{
+    struct rt_serial_device *serial = (struct rt_serial_device*)param; 
+    rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    PL011_REG_ICR(UART0_BASE) = PL011_INTERRUPT_RECEIVE;
+}
+
+
+/* UART device driver structure */
+static struct hw_uart_device _uart0_device =
+{
+    PL011_BASE,
+    IRQ_PL011,
+};
+
+static struct rt_serial_device _serial0;
+
+int rt_hw_uart_init(void)
+{
+    struct hw_uart_device *uart;
+    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
+
+    uart = &_uart0_device;
+
+    _serial0.ops    = &_uart_ops;
+    _serial0.config = config;
+
+    /* register UART1 device */
+    rt_hw_serial_register(&_serial0, "uart",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
+                          uart);
+    rt_hw_interrupt_install(uart->irqno, rt_hw_uart_isr, &_serial0, "uart");
+
+    return 0;
+}
diff --git a/bsp/raspberry-pi/raspi4-32/driver/drv_uart.h b/bsp/raspberry-pi/raspi4-32/driver/drv_uart.h
new file mode 100644
index 0000000000000000000000000000000000000000..714043efd37c90aba5101a43d817108401eee59b
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/drv_uart.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2020-04-16     bigmagic       first version
+ */
+
+#ifndef DRV_UART_H__
+#define DRV_UART_H__
+
+// register's bit
+#define PL011_FR_RI          (1 << 8)
+#define PL011_FR_TXFE        (1 << 7)
+#define PL011_FR_RXFF        (1 << 6)
+#define PL011_FR_TXFF        (1 << 5)
+#define PL011_FR_RXFE        (1 << 4)
+#define PL011_FR_BUSY        (1 << 3)
+#define PL011_FR_DCD         (1 << 2)
+#define PL011_FR_DSR         (1 << 1)
+#define PL011_FR_CTS         (1 << 0)
+
+#define PL011_LCRH_SPS       (1 << 7)
+#define PL011_LCRH_WLEN_8    (3 << 5)
+#define PL011_LCRH_WLEN_7    (2 << 5)
+#define PL011_LCRH_WLEN_6    (1 << 5)
+#define PL011_LCRH_WLEN_5    (0 << 5)
+#define PL011_LCRH_FEN       (1 << 4)
+#define PL011_LCRH_STP2      (1 << 3)
+#define PL011_LCRH_EPS       (1 << 2)
+#define PL011_LCRH_PEN       (1 << 1)
+#define PL011_LCRH_BRK       (1 << 0)
+
+#define PL011_CR_CTSEN       (1 << 15)
+#define PL011_CR_RTSEN       (1 << 14)
+#define PL011_CR_RTS         (1 << 11)
+#define PL011_CR_DTR         (1 << 10)
+#define PL011_CR_RXE         (1 << 9)
+#define PL011_CR_TXE         (1 << 8)
+#define PL011_CR_LBE         (1 << 7)
+#define PL011_CR_SIRLP       (1 << 2)
+#define PL011_CR_SIREN       (1 << 1)
+#define PL011_CR_UARTEN      (1 << 0)
+
+#define PL011_IMSC_TXIM      (1 << 5)
+#define PL011_IMSC_RXIM      (1 << 4)
+
+#define PL011_INTERRUPT_OVERRUN_ERROR   (1 << 10)
+#define PL011_INTERRUPT_BREAK_ERROR     (1 << 9)
+#define PL011_INTERRUPT_PARITY_ERROR    (1 << 8)
+#define PL011_INTERRUPT_FRAMING_ERROR   (1 << 7)
+#define PL011_INTERRUPT_RECEIVE_TIMEOUT (1 << 6)
+#define PL011_INTERRUPT_TRANSMIT        (1 << 5)
+#define PL011_INTERRUPT_RECEIVE         (1 << 4)
+#define PL011_INTERRUPT_nUARTCTS        (1 << 1)
+
+#define PL011_REG_DR(BASE)              HWREG32(BASE + 0x00)
+#define PL011_REG_RSRECR(BASE)          HWREG32(BASE + 0x04)
+#define PL011_REG_RESERVED0(BASE)       HWREG32(BASE + 0x08)
+#define PL011_REG_FR(BASE)              HWREG32(BASE + 0x18)
+#define PL011_REG_RESERVED1(BASE)       HWREG32(BASE + 0x1C)
+#define PL011_REG_ILPR(BASE)            HWREG32(BASE + 0x20)
+#define PL011_REG_IBRD(BASE)            HWREG32(BASE + 0x24)
+#define PL011_REG_FBRD(BASE)            HWREG32(BASE + 0x28)
+#define PL011_REG_LCRH(BASE)            HWREG32(BASE + 0x2C)
+#define PL011_REG_CR(BASE)              HWREG32(BASE + 0x30)
+#define PL011_REG_IFLS(BASE)            HWREG32(BASE + 0x34)
+#define PL011_REG_IMSC(BASE)            HWREG32(BASE + 0x38)
+#define PL011_REG_RIS(BASE)             HWREG32(BASE + 0x3C)
+#define PL011_REG_MIS(BASE)             HWREG32(BASE + 0x40)
+#define PL011_REG_ICR(BASE)             HWREG32(BASE + 0x44)
+#define PL011_REG_DMACR(BASE)           HWREG32(BASE + 0x48)
+#define PL011_REG_RESERVED2(BASE)       HWREG32(BASE + 0x4C)
+#define PL011_REG_ITCR(BASE)            HWREG32(BASE + 0x80)
+#define PL011_REG_ITIP(BASE)            HWREG32(BASE + 0x84)
+#define PL011_REG_ITOP(BASE)            HWREG32(BASE + 0x88)
+#define PL011_REG_TDR(BASE)             HWREG32(BASE + 0x8C)
+
+int rt_hw_uart_init(void);
+
+#endif /* DRV_UART_H__ */
diff --git a/bsp/raspberry-pi/raspi4-32/driver/raspi4.h b/bsp/raspberry-pi/raspi4-32/driver/raspi4.h
new file mode 100644
index 0000000000000000000000000000000000000000..9106643e3dd54c781a9d2f0917d838b12e5643b7
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/driver/raspi4.h
@@ -0,0 +1,73 @@
+#ifndef __RASPI4_H__
+#define __RASPI4_H__
+//https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/rpi_DATA_2711_1p0.pdf
+
+#define __REG32(x)  (*((volatile unsigned int *)(x)))
+#define __REG16(x)  (*((volatile unsigned short *)(x)))
+
+/* GIC IRQ MAX */
+#define MAX_HANDLERS                (256)
+
+/* base address */
+#define PER_BASE                    (0xFE000000)
+
+/* GPIO */
+#define GPIO_BASE                   (PER_BASE + 0x00200000)
+
+/* Timer (ARM side) */
+#define ARM_TIMER_IRQ       (64)
+#define ARM_TIMER_BASE      (PER_BASE + 0xB000)
+#define ARM_TIMER_LOAD      HWREG32(ARM_TIMER_BASE + 0x400)
+#define ARM_TIMER_VALUE     HWREG32(ARM_TIMER_BASE + 0x404)
+#define ARM_TIMER_CTRL      HWREG32(ARM_TIMER_BASE + 0x408)
+#define ARM_TIMER_IRQCLR    HWREG32(ARM_TIMER_BASE + 0x40C)
+#define ARM_TIMER_RAWIRQ    HWREG32(ARM_TIMER_BASE + 0x410)
+#define ARM_TIMER_MASKIRQ   HWREG32(ARM_TIMER_BASE + 0x414)
+#define ARM_TIMER_RELOAD    HWREG32(ARM_TIMER_BASE + 0x418)
+#define ARM_TIMER_PREDIV    HWREG32(ARM_TIMER_BASE + 0x41C)
+#define ARM_TIMER_CNTR      HWREG32(ARM_TIMER_BASE + 0x420)
+
+/* UART PL011 */
+#define UART0_BASE                  (PER_BASE + 0x00201000)
+#define PL011_BASE                  UART0_BASE
+#define IRQ_PL011                   (96 + 57)
+#define UART_REFERENCE_CLOCK        (48000000)
+
+// 0x40, 0x44, 0x48, 0x4c: Core 0~3 Timers interrupt control
+#define CORE0_TIMER_IRQ_CTRL        HWREG32(0xFF800040)
+#define TIMER_IRQ                   30
+#define NON_SECURE_TIMER_IRQ        (1 << 1)
+
+/* GIC */
+#define INTC_BASE                   (0xff800000)
+#define ARM_GIC_NR_IRQS             (512)
+#define ARM_GIC_MAX_NR              (512)
+#define GIC_V2_DISTRIBUTOR_BASE     (INTC_BASE + 0x00041000)
+#define GIC_V2_CPU_INTERFACE_BASE   (INTC_BASE + 0x00042000)
+#define GIC_V2_HYPERVISOR_BASE      (INTC_BASE + 0x00044000)
+#define GIC_V2_VIRTUAL_CPU_BASE     (INTC_BASE + 0x00046000)
+
+#define GIC_PL400_DISTRIBUTOR_PPTR  GIC_V2_DISTRIBUTOR_BASE
+#define GIC_PL400_CONTROLLER_PPTR   GIC_V2_CPU_INTERFACE_BASE
+
+#define GIC_IRQ_START   0
+
+#define GIC_ACK_INTID_MASK  0x000003ff
+
+/* the basic constants and interfaces needed by gic */
+rt_inline rt_uint32_t platform_get_gic_dist_base(void)
+{
+    return GIC_PL400_DISTRIBUTOR_PPTR;
+}
+
+rt_inline rt_uint32_t platform_get_gic_cpu_base(void)
+{
+    return GIC_PL400_CONTROLLER_PPTR;
+}
+
+static inline  void __DSB(void)
+{
+    __asm__ volatile ("dsb 0xF":::"memory");
+}
+
+#endif
diff --git a/bsp/raspberry-pi/raspi4-32/link.lds b/bsp/raspberry-pi/raspi4-32/link.lds
new file mode 100644
index 0000000000000000000000000000000000000000..3f2f8ca413034e705b3f44d0629a1e36f0acad30
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/link.lds
@@ -0,0 +1,153 @@
+/*
+ * File      : link.lds
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * 2017-5-30     bernard       first version
+ */
+
+/* _EL1_STACK_SIZE = DEFINED(_EL1_STACK_SIZE) ? _EL1_STACK_SIZE : 0x20000; */
+
+SECTIONS
+{
+    . = 0x8000;
+    . = ALIGN(4096);
+    .text :
+    {
+        KEEP(*(.text.entrypoint))       /* The entry point */
+        *(.vectors)
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        *(COMMON)
+        
+        /* section information for finsh shell */
+        . = ALIGN(16);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(16);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(16);
+
+        /* section information for initial. */
+        . = ALIGN(16);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+        . = ALIGN(16);
+
+        . = ALIGN(16);
+        _etext = .;
+    }
+
+    .eh_frame_hdr :
+    {
+         *(.eh_frame_hdr)
+         *(.eh_frame_entry)
+    }
+    .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+
+    . = ALIGN(16);
+    .data :
+    {
+     *(.data)
+     *(.data.*)
+
+     *(.data1)
+     *(.data1.*)
+
+     . = ALIGN(16);
+     _gp = ABSOLUTE(.);     /* Base of small data */
+
+     *(.sdata)
+     *(.sdata.*)
+    }
+
+    . = ALIGN(16);
+    .ctors :
+    {
+        PROVIDE(__ctors_start__ = .);
+        KEEP(*(SORT(.ctors.*)))
+        KEEP(*(.ctors))
+        PROVIDE(__ctors_end__ = .);
+    }
+
+    .dtors :
+    {
+        PROVIDE(__dtors_start__ = .);
+        KEEP(*(SORT(.dtors.*)))
+        KEEP(*(.dtors))
+        PROVIDE(__dtors_end__ = .);
+    }
+
+    . = ALIGN(16);
+    .bss :
+    {
+        PROVIDE(__bss_start = .);
+        *(.bss)
+        *(.bss.*)
+        *(.dynbss)
+        
+        PROVIDE(__bss_end = .);
+    }
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}
+
+__bss_size = (__bss_end - __bss_start)>>3;
diff --git a/bsp/raspberry-pi/raspi4-32/rtconfig.h b/bsp/raspberry-pi/raspi4-32/rtconfig.h
new file mode 100644
index 0000000000000000000000000000000000000000..479b6a0fd3f3f784b2c5dcec3a786fb21a00c8d8
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/rtconfig.h
@@ -0,0 +1,173 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Project Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 100
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 2048
+#define RT_USING_TIMER_SOFT
+#define RT_TIMER_THREAD_PRIO 4
+#define RT_TIMER_THREAD_STACK_SIZE 2048
+#define RT_DEBUG
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_SMALL_MEM
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart"
+#define RT_VER_NUM 0x40003
+#define ARCH_ARMV8
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+
+/* C++ features */
+
+
+/* Command shell */
+
+#define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_CMD_SIZE 80
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_DEFAULT
+#define FINSH_ARG_MAX 10
+
+/* Device virtual file system */
+
+#define RT_USING_DFS
+#define DFS_USING_WORKDIR
+#define DFS_FILESYSTEMS_MAX 2
+#define DFS_FILESYSTEM_TYPES_MAX 2
+#define DFS_FD_MAX 16
+#define RT_USING_DFS_DEVFS
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_PIPE_BUFSZ 512
+#define RT_USING_SERIAL
+#define RT_SERIAL_USING_DMA
+#define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_PIN
+
+/* Using USB */
+
+
+/* POSIX layer and C standard library */
+
+#define RT_USING_LIBC
+#define RT_USING_POSIX
+
+/* Network */
+
+/* Socket abstraction layer */
+
+
+/* Network interface device */
+
+
+/* light weight TCP/IP stack */
+
+
+/* AT commands */
+
+
+/* VBUS(Virtual Software BUS) */
+
+
+/* Utilities */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* IoT Cloud */
+
+
+/* security packages */
+
+
+/* language packages */
+
+
+/* multimedia packages */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+
+/* peripheral libraries and drivers */
+
+
+/* miscellaneous packages */
+
+
+/* samples: kernel and components samples */
+
+#define BCM2711_SOC
+
+/* Hardware Drivers Config */
+
+/* BCM Peripheral Drivers */
+
+#define BSP_USING_UART
+#define RT_USING_UART0
+#define BSP_USING_GIC
+#define BSP_USING_GIC400
+#define BSP_USING_PIN
+#define BSP_USING_CORETIMER
+
+/* Board Peripheral Drivers */
+
+
+#endif
diff --git a/bsp/raspberry-pi/raspi4-32/rtconfig.py b/bsp/raspberry-pi/raspi4-32/rtconfig.py
new file mode 100644
index 0000000000000000000000000000000000000000..681ec91b9e6702014cd0e758322166839f7a63c0
--- /dev/null
+++ b/bsp/raspberry-pi/raspi4-32/rtconfig.py
@@ -0,0 +1,54 @@
+import os
+
+# toolchains options
+ARCH        ='arm'
+CPU         ='cortex-a'
+CROSS_TOOL  ='gcc'
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = r'../../..'
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+
+PLATFORM    = 'gcc'
+EXEC_PATH   = r'/usr/bin'  
+
+BUILD = 'debug'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+if PLATFORM == 'gcc':
+    # toolchains
+    # PREFIX = 'arm-none-eabi-'
+    PREFIX = 'arm-none-eabi-'
+    CC      = PREFIX + 'gcc'
+    CXX     = PREFIX + 'g++'
+    AS      = PREFIX + 'gcc'
+    AR      = PREFIX + 'ar'
+    LINK    = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE    = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY  = PREFIX + 'objcopy'
+
+    DEVICE = ' -march=armv8-a -mtune=cortex-a72'
+    CFLAGS = DEVICE + ' -Wall'
+    AFLAGS = ' -c' + ' -x assembler-with-cpp -D__ASSEMBLY__'
+    LFLAGS  = DEVICE + ' -nostartfiles -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,system_vectors -T link.lds'
+    CPATH   = ''
+    LPATH   = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS
+
+DUMP_ACTION = OBJDUMP + ' -D -S $TARGET > rtt.asm\n'
+POST_ACTION = OBJCPY + ' -O binary $TARGET kernel7.img\n' + SIZE + ' $TARGET \n'
diff --git a/libcpu/arm/cortex-a/start_gcc.S b/libcpu/arm/cortex-a/start_gcc.S
index 268cc7ef5618d2b61da732a86e2b2d4557d9bf05..a8f3a36630d1504774ba954387520887e2221a83 100644
--- a/libcpu/arm/cortex-a/start_gcc.S
+++ b/libcpu/arm/cortex-a/start_gcc.S
@@ -52,6 +52,26 @@ stack_top:
 /* reset entry */
 .globl _reset
 _reset:
+#ifdef ARCH_ARMV8
+    /* Check for HYP mode */
+    mrs r0, cpsr_all
+    and r0, r0, #0x1F
+    mov r8, #0x1A
+    cmp r0, r8
+    beq overHyped
+    b continue
+
+overHyped: /* Get out of HYP mode */
+    ldr r1, =continue
+    msr ELR_hyp, r1
+    mrs r1, cpsr_all
+    and r1, r1, #0x1f    ;@ CPSR_MODE_MASK
+    orr r1, r1, #0x13    ;@ CPSR_MODE_SUPERVISOR
+    msr SPSR_hyp, r1
+    eret
+
+continue:
+#endif
     /* set the cpu to SVC32 mode and disable interrupt */
     cps #Mode_SVC