diff --git a/bsp/k210/driver/Kconfig b/bsp/k210/driver/Kconfig
index 4d38a7c9b2d0246bf20e50ecf9d0f081b1be16e7..8acbf5202c1d885768e60c78eb444526d58bdf9f 100644
--- a/bsp/k210/driver/Kconfig
+++ b/bsp/k210/driver/Kconfig
@@ -2,17 +2,44 @@ config BSP_USING_UART_HS
     bool "Enable High Speed UART"
     default y
 
-config BSP_USING_UART1
-    bool "Enable UART1 (GPIO0/1)"
+menu "General Purpose UARTs"
+
+menuconfig BSP_USING_UART1
+    bool "Enable UART1"
     default n
+    if BSP_USING_UART1
+        config BSP_UART1_TXD_PIN
+            int "uart1 TXD pin number"
+            default 20
+        config BSP_UART1_RXD_PIN
+            int "uart1 RXD pin number"
+            default 21
+    endif
 
-config BSP_USING_UART2
-    bool "Enable UART2 (GPIO0/1)"
+menuconfig BSP_USING_UART2
+    bool "Enable UART2"
     default n
+    if BSP_USING_UART2
+        config BSP_UART2_TXD_PIN
+            int "uart2 TXD pin number"
+            default 28
+        config BSP_UART2_RXD_PIN
+            int "uart2 RXD pin number"
+            default 27
+    endif
 
-config BSP_USING_UART3
-    bool "Enable UART3 (GPIO0/1)"
+menuconfig BSP_USING_UART3
+    bool "Enable UART3"
     default n
+    if BSP_USING_UART3
+        config BSP_UART3_TXD_PIN
+            int "uart3 TXD pin number"
+            default 22
+        config BSP_UART3_RXD_PIN
+            int "uart3 RXD pin number"
+            default 23
+    endif
+endmenu
 
 config BSP_USING_I2C1
     bool "Enable I2C1 (GPIO0/1)"
diff --git a/bsp/k210/driver/drv_io_config.c b/bsp/k210/driver/drv_io_config.c
index cd0e8f27f6f16536be272ab64fcc99a658ccbdf5..3098537eae38b20659bd59f3ec036454221eabfd 100644
--- a/bsp/k210/driver/drv_io_config.c
+++ b/bsp/k210/driver/drv_io_config.c
@@ -63,6 +63,18 @@ static struct io_config
 #endif
 #endif
 
+#ifdef BSP_USING_UART1
+    IOCONFIG(BSP_UART1_TXD_PIN, FUNC_UART1_TX),
+    IOCONFIG(BSP_UART1_RXD_PIN, FUNC_UART1_RX),
+#endif
+#ifdef BSP_USING_UART2
+    IOCONFIG(BSP_UART2_TXD_PIN, FUNC_UART2_TX),
+    IOCONFIG(BSP_UART2_RXD_PIN, FUNC_UART2_RX),
+#endif
+#ifdef BSP_USING_UART3
+    IOCONFIG(BSP_UART3_TXD_PIN, FUNC_UART3_TX),
+    IOCONFIG(BSP_UART3_RXD_PIN, FUNC_UART3_RX),
+#endif
 };
 
 static int print_io_config()
@@ -89,7 +101,15 @@ int io_config_init(void)
     sysctl_set_power_mode(SYSCTL_POWER_BANK0, SYSCTL_POWER_V18);
     sysctl_set_power_mode(SYSCTL_POWER_BANK1, SYSCTL_POWER_V18);
     sysctl_set_power_mode(SYSCTL_POWER_BANK2, SYSCTL_POWER_V18);
-    
+#ifdef BSP_USING_UART2
+    // for IO-27/28
+    sysctl_set_power_mode(SYSCTL_POWER_BANK4, SYSCTL_POWER_V33);
+#endif
+#if  defined(BSP_USING_UART1) || defined(BSP_USING_UART3)
+    // for IO-20~23
+    sysctl_set_power_mode(SYSCTL_POWER_BANK3, SYSCTL_POWER_V33);
+#endif
+
     for(i = 0; i < count; i++)
     {
         fpioa_set_function(io_config[i].io_num, io_config[i].func);
diff --git a/bsp/k210/driver/drv_uart.c b/bsp/k210/driver/drv_uart.c
index 7e22d40c5dea3062f93542ebffc741f276daa512..830b14cbbcf6113aa9830d115515884724b9746a 100644
--- a/bsp/k210/driver/drv_uart.c
+++ b/bsp/k210/driver/drv_uart.c
@@ -17,10 +17,12 @@
 #include <stdio.h>
 #include <sysctl.h>
 
-// #include "uart.h"
+#include "uart.h"
 #include "uarths.h"
 #include "plic.h"
 
+#define UART_DEFAULT_BAUDRATE               115200
+
 static volatile uarths_t *const _uarths = (volatile uarths_t *)UARTHS_BASE_ADDR;
 
 struct device_uart
@@ -29,22 +31,71 @@ struct device_uart
     rt_uint32_t irqno;
 };
 
-static rt_err_t  uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
+static rt_err_t  rt_uarths_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
+static rt_err_t  uarths_control(struct rt_serial_device *serial, int cmd, void *arg);
+static int       drv_uarths_putc(struct rt_serial_device *serial, char c);
+static int       drv_uarths_getc(struct rt_serial_device *serial);
+
+static void     uarths_irq_handler(int irqno, void *param);
+
+static rt_err_t  rt_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
 static rt_err_t  uart_control(struct rt_serial_device *serial, int cmd, void *arg);
 static int       drv_uart_putc(struct rt_serial_device *serial, char c);
 static int       drv_uart_getc(struct rt_serial_device *serial);
 
 static void     uart_irq_handler(int irqno, void *param);
 
+const struct rt_uart_ops _uart_hs_ops =
+{
+    rt_uarths_configure,
+    uarths_control,
+    drv_uarths_putc,
+    drv_uarths_getc,
+    RT_NULL
+};
+
 const struct rt_uart_ops _uart_ops =
 {
-    uart_configure,
+    rt_uart_configure,
     uart_control,
     drv_uart_putc,
     drv_uart_getc,
+    //TODO: add DMA support
     RT_NULL
 };
 
+/* START ported from kendryte standalone sdk uart.c */
+#define __UART_BRATE_CONST  16
+
+volatile uart_t* const  _uart[3] =
+{
+    (volatile uart_t*)UART1_BASE_ADDR,
+    (volatile uart_t*)UART2_BASE_ADDR,
+    (volatile uart_t*)UART3_BASE_ADDR
+};
+
+void uart_init(uart_device_number_t channel)
+{
+    sysctl_clock_enable(SYSCTL_CLOCK_UART1 + channel);
+    sysctl_reset(SYSCTL_RESET_UART1 + channel);
+}
+
+/* END ported from kendryte standalone sdk uart.c */
+static inline uart_device_number_t _get_uart_channel(rt_uint32_t addr)
+{
+    switch (addr)
+    {
+        case UART1_BASE_ADDR:
+            return UART_DEVICE_1;
+        case UART2_BASE_ADDR:
+            return UART_DEVICE_2;
+        case UART3_BASE_ADDR:
+            return UART_DEVICE_3;
+        default:
+            return UART_DEVICE_MAX;
+    }
+}
+
 /*
  * UART Initiation
  */
@@ -62,7 +113,7 @@ int rt_hw_uart_init(void)
         serial  = &serial_hs;
         uart    = &uart_hs;
 
-        serial->ops              = &_uart_ops;
+        serial->ops              = &_uart_hs_ops;
         serial->config           = config;
         serial->config.baud_rate = 115200;
 
@@ -86,36 +137,79 @@ int rt_hw_uart_init(void)
 
         serial->ops              = &_uart_ops;
         serial->config           = config;
-        serial->config.baud_rate = 115200;
+        serial->config.baud_rate = UART_DEFAULT_BAUDRATE;
 
         uart->hw_base   = UART1_BASE_ADDR;
         uart->irqno     = IRQN_UART1_INTERRUPT;
 
+        uart_init(UART_DEVICE_1);
+
         rt_hw_serial_register(serial,
-                              "uarths",
+                              "uart1",
                               RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                               uart);
     }
 #endif
 
 #ifdef BSP_USING_UART2
+    {
+        static struct rt_serial_device  serial2;
+        static struct device_uart       uart2;
+
+        serial  = &serial2;
+        uart    = &uart2;
+
+        serial->ops              = &_uart_ops;
+        serial->config           = config;
+        serial->config.baud_rate = UART_DEFAULT_BAUDRATE;
+
+        uart->hw_base   = UART2_BASE_ADDR;
+        uart->irqno     = IRQN_UART2_INTERRUPT;
+
+        uart_init(UART_DEVICE_2);
+
+        rt_hw_serial_register(serial,
+                              "uart2",
+                              RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
+                              uart);
+    }
 #endif
 
 #ifdef BSP_USING_UART3
+    {
+        static struct rt_serial_device  serial3;
+        static struct device_uart       uart3;
+
+        serial  = &serial3;
+        uart    = &uart3;
+
+        serial->ops              = &_uart_ops;
+        serial->config           = config;
+        serial->config.baud_rate = UART_DEFAULT_BAUDRATE;
+
+        uart->hw_base   = UART3_BASE_ADDR;
+        uart->irqno     = IRQN_UART3_INTERRUPT;
+
+        uart_init(UART_DEVICE_3);
+
+        rt_hw_serial_register(serial,
+                              "uart3",
+                              RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
+                              uart);
+    }
 #endif
 
     return 0;
 }
 
 /*
- * UART interface
+ * UARTHS interface
  */
-static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+static rt_err_t rt_uarths_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
 {
-    rt_uint32_t baud_div;
     struct device_uart *uart;
-    uint32_t freq = sysctl_clock_get_freq(SYSCTL_CLOCK_CPU);
-    uint16_t div = freq / cfg->baud_rate - 1;
+    uint32_t freq_hs = sysctl_clock_get_freq(SYSCTL_CLOCK_CPU);
+    uint16_t div_hs = freq_hs / cfg->baud_rate - 1;
 
     RT_ASSERT(serial != RT_NULL);
     serial->config = *cfg;
@@ -125,7 +219,7 @@ static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_co
 
     if (uart->hw_base == UARTHS_BASE_ADDR)
     {
-        _uarths->div.div = div;
+        _uarths->div.div = div_hs;
         _uarths->txctrl.txen = 1;
         _uarths->rxctrl.rxen = 1;
         _uarths->txctrl.txcnt = 0;
@@ -137,13 +231,14 @@ static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_co
     }
     else
     {
+        return (-1);
         /* other uart */
     }
 
     return (RT_EOK);
 }
 
-static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg)
+static rt_err_t uarths_control(struct rt_serial_device *serial, int cmd, void *arg)
 {
     struct device_uart *uart;
 
@@ -160,7 +255,7 @@ static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg
 
     case RT_DEVICE_CTRL_SET_INT:
         /* install interrupt */
-        rt_hw_interrupt_install(uart->irqno, uart_irq_handler,
+        rt_hw_interrupt_install(uart->irqno, uarths_irq_handler,
                                 serial, serial->parent.parent.name);
         rt_hw_interrupt_umask(uart->irqno);
         break;
@@ -169,38 +264,168 @@ static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg
     return (RT_EOK);
 }
 
-static int drv_uart_putc(struct rt_serial_device *serial, char c)
+
+static int drv_uarths_putc(struct rt_serial_device *serial, char c)
+{
+    struct device_uart *uart = serial->parent.user_data;
+    RT_ASSERT(uart->hw_base == UARTHS_BASE_ADDR);
+
+    while (_uarths->txdata.full);
+    _uarths->txdata.data = (uint8_t)c;
+
+    return (1);
+}
+
+static int drv_uarths_getc(struct rt_serial_device *serial)
+{
+    struct device_uart *uart = serial->parent.user_data;
+    RT_ASSERT(uart->hw_base == UARTHS_BASE_ADDR);
+
+    uarths_rxdata_t recv = _uarths->rxdata;
+    if (recv.empty)
+        return EOF;
+    else
+        return (recv.data & 0xff);
+    /* Receive Data Available */
+
+    return (-1);
+}
+
+/* UARTHS ISR */
+static void uarths_irq_handler(int irqno, void *param)
+{
+    struct rt_serial_device *serial = (struct rt_serial_device *)param;
+    struct device_uart *uart = serial->parent.user_data;
+    RT_ASSERT(uart->hw_base == UARTHS_BASE_ADDR);
+
+    /* read interrupt status and clear it */
+    if (_uarths->ip.rxwm)
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+}
+
+/*
+ * UART interface
+ */
+static rt_err_t rt_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
 {
     struct device_uart *uart;
+    uart_bitwidth_t data_width = (uart_bitwidth_t)cfg->data_bits ;
+    uart_stopbit_t stopbit = (uart_stopbit_t)cfg->stop_bits;
+    uart_parity_t parity = (uart_parity_t)cfg->parity;
+
+    uint32_t freq = sysctl_clock_get_freq(SYSCTL_CLOCK_APB0);
+    uint32_t divisor = freq / (uint32_t)cfg->baud_rate;
+    uint8_t dlh = divisor >> 12;
+    uint8_t dll = (divisor - (dlh << 12)) / __UART_BRATE_CONST;
+    uint8_t dlf = divisor - (dlh << 12) - dll * __UART_BRATE_CONST;
+
+    RT_ASSERT(serial != RT_NULL);
+    serial->config = *cfg;
 
     uart = serial->parent.user_data;
-    if (uart->hw_base == UARTHS_BASE_ADDR)
+    RT_ASSERT(uart != RT_NULL);
+
+    uart_device_number_t channel = _get_uart_channel(uart->hw_base);
+    RT_ASSERT(channel != UART_DEVICE_MAX);
+
+    RT_ASSERT(data_width >= 5 && data_width <= 8);
+    if (data_width == 5)
     {
-        while (_uarths->txdata.full);
-        _uarths->txdata.data = (uint8_t)c;
+        RT_ASSERT(stopbit != UART_STOP_2);
     }
     else
     {
-        /* other uart */
+        RT_ASSERT(stopbit != UART_STOP_1_5);
     }
 
-    return (1);
+    uint32_t stopbit_val = stopbit == UART_STOP_1 ? 0 : 1;
+    uint32_t parity_val;
+    switch (parity)
+    {
+        case UART_PARITY_NONE:
+            parity_val = 0;
+            break;
+        case UART_PARITY_ODD:
+            parity_val = 1;
+            break;
+        case UART_PARITY_EVEN:
+            parity_val = 3;
+            break;
+        default:
+            RT_ASSERT(!"Invalid parity");
+            break;
+    }
+
+    _uart[channel]->LCR |= 1u << 7;
+    _uart[channel]->DLH = dlh;
+    _uart[channel]->DLL = dll;
+    _uart[channel]->DLF = dlf;
+    _uart[channel]->LCR = 0;
+    _uart[channel]->LCR = (data_width - 5) |
+                          (stopbit_val << 2) |
+                          (parity_val << 3);
+    _uart[channel]->LCR &= ~(1u << 7);
+    _uart[channel]->IER |= 0x80; /* THRE */
+    _uart[channel]->FCR = UART_RECEIVE_FIFO_1 << 6 |
+                          UART_SEND_FIFO_8 << 4 |
+                          0x1 << 3 |
+                          0x1;
+
+    return (RT_EOK);
 }
 
-static int drv_uart_getc(struct rt_serial_device *serial)
+static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg)
 {
-    int ret = -1;
-    struct device_uart *uart = serial->parent.user_data;
+    struct device_uart *uart;
 
-    if (uart->hw_base == UARTHS_BASE_ADDR)
+    uart = serial->parent.user_data;
+    uart_device_number_t channel = _get_uart_channel(uart->hw_base);
+
+    RT_ASSERT(uart != RT_NULL);
+    RT_ASSERT(channel != UART_DEVICE_MAX);
+
+    switch (cmd)
     {
-        uarths_rxdata_t recv = _uarths->rxdata;
-        if (recv.empty)
-            return EOF;
-        else
-            return (recv.data & 0xff);
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* Disable the UART Interrupt */
+        rt_hw_interrupt_mask(uart->irqno);
+        _uart[channel]->IER &= ~0x1;
+        break;
+
+    case RT_DEVICE_CTRL_SET_INT:
+        /* install interrupt */
+        rt_hw_interrupt_install(uart->irqno, uart_irq_handler,
+                                serial, serial->parent.parent.name);
+        rt_hw_interrupt_umask(uart->irqno);
+        _uart[channel]->IER |= 0x1;
+        break;
     }
 
+    return (RT_EOK);
+}
+
+static int drv_uart_putc(struct rt_serial_device *serial, char c)
+{
+    struct device_uart *uart = serial->parent.user_data;
+    uart_device_number_t channel = _get_uart_channel(uart->hw_base);
+    RT_ASSERT(channel != UART_DEVICE_MAX);
+
+    while (_uart[channel]->LSR & (1u << 5));
+    _uart[channel]->THR = c;
+
+    return (1);
+}
+
+static int drv_uart_getc(struct rt_serial_device *serial)
+{
+    struct device_uart *uart = serial->parent.user_data;
+    uart_device_number_t channel = _get_uart_channel(uart->hw_base);
+    RT_ASSERT(channel != UART_DEVICE_MAX);
+
+    if (_uart[channel]->LSR & 1)
+        return (char)(_uart[channel]->RBR & 0xff);
+    else
+        return EOF;
     /* Receive Data Available */
 
     return (-1);
@@ -209,21 +434,20 @@ static int drv_uart_getc(struct rt_serial_device *serial)
 /* UART ISR */
 static void uart_irq_handler(int irqno, void *param)
 {
-    rt_ubase_t isr;
     struct rt_serial_device *serial = (struct rt_serial_device *)param;
     struct device_uart *uart = serial->parent.user_data;
+    uart_device_number_t channel = _get_uart_channel(uart->hw_base);
+    RT_ASSERT(channel != UART_DEVICE_MAX);
 
     /* read interrupt status and clear it */
-    if (uart->hw_base == UARTHS_BASE_ADDR)
-    {
-        if (_uarths->ip.rxwm) 
-            rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
-    }
+    if (_uart[channel]->LSR)
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
 }
 
 /* WEAK for SDK 0.5.6 */
 
-RT_WEAK void uart_debug_init(int uart_channel)
+RT_WEAK void uart_debug_init(uart_device_number_t uart_channel)
 {
 
 }
+