提交 8b4aadb4 编写于 作者: H heyuanjie87

add usb state

上级 3d9c558a
......@@ -207,6 +207,18 @@ extern "C" {
(((rt_uint16_t)(*(((rt_uint8_t *)(x)) + 1))) << 8))
typedef void (*func_callback)(void *context);
typedef enum
{
USB_STATE_NOTATTACHED = 0,
USB_STATE_ATTACHED,
USB_STATE_POWERED,
USB_STATE_RECONNECTING,
USB_STATE_UNAUTHENTICATED,
USB_STATE_DEFAULT,
USB_STATE_ADDRESS,
USB_STATE_CONFIGURED,
USB_STATE_SUSPENDED
}udevice_state_t;
#pragma pack(1)
......@@ -310,6 +322,21 @@ struct uhub_descriptor
};
typedef struct uhub_descriptor* uhub_desc_t;
struct uhid_descriptor
{
rt_uint8_t bLength;
rt_uint8_t type;
rt_uint16_t bcdHID;
rt_uint8_t bCountryCode;
rt_uint8_t bNumDescriptors;
struct hid_descriptor_list
{
rt_uint8_t type;
rt_uint16_t wLength;
}Descriptor[1];
};
typedef struct uhid_descriptor* uhid_desc_t;
struct ureqest
{
rt_uint8_t request_type;
......
......@@ -131,6 +131,7 @@ struct udevice
struct udevice_descriptor dev_desc;
const char** str;
udevice_state_t state;
rt_list_t cfg_list;
uconfig_t curr_cfg;
rt_uint8_t nr_intf;
......@@ -198,6 +199,7 @@ uep_t rt_usbd_find_endpoint(udevice_t device, uclass_t* pcls, rt_uint8_t ep_addr
uclass_t rt_usbd_class_mstorage_create(udevice_t device);
uclass_t rt_usbd_class_cdc_create(udevice_t device);
uclass_t rt_usbd_class_rndis_create(udevice_t device);
uclass_t rt_usbd_class_dap_create(udevice_t device);
#ifdef RT_USB_DEVICE_COMPOSITE
rt_err_t rt_usbd_class_set_iad(uclass_t cls, uiad_desc_t iad_desc);
......
......@@ -199,6 +199,12 @@ static rt_err_t _get_interface(struct udevice* device, ureq_t setup)
RT_DEBUG_LOG(RT_DEBUG_USB, ("_get_interface\n"));
if (device->state != USB_STATE_CONFIGURED)
{
dcd_ep_stall(device->dcd, 0);
return -RT_ERROR;
}
/* find the specified interface and its alternate setting */
intf = rt_usbd_find_interface(device, setup->index & 0xFF, RT_NULL);
value = intf->curr_setting->intf_desc->bAlternateSetting;
......@@ -230,6 +236,12 @@ static rt_err_t _set_interface(struct udevice* device, ureq_t setup)
RT_DEBUG_LOG(RT_DEBUG_USB, ("_set_interface\n"));
if (device->state != USB_STATE_CONFIGURED)
{
dcd_ep_stall(device->dcd, 0);
return -RT_ERROR;
}
/* find the specified interface */
intf = rt_usbd_find_interface(device, setup->index & 0xFF, RT_NULL);
......@@ -267,9 +279,15 @@ static rt_err_t _get_config(struct udevice* device, ureq_t setup)
RT_DEBUG_LOG(RT_DEBUG_USB, ("_get_config\n"));
if (device->state == USB_STATE_CONFIGURED)
{
/* get current configuration */
value = device->curr_cfg->cfg_desc.bConfigurationValue;
}
else
{
value = 0;
}
/* write the current configuration to endpoint 0 */
dcd_ep_write(device->dcd, 0, &value, 1);
......@@ -298,6 +316,20 @@ static rt_err_t _set_config(struct udevice* device, ureq_t setup)
RT_DEBUG_LOG(RT_DEBUG_USB, ("_set_config\n"));
if (setup->value > device->dev_desc.bNumConfigurations)
{
dcd_ep_stall(device->dcd, 0);
return -RT_ERROR;
}
if (setup->value == 0)
{
RT_DEBUG_LOG(RT_DEBUG_USB, ("address state\n"));
device->state = USB_STATE_ADDRESS;
goto _exit;
}
/* set current configuration */
rt_usbd_set_config(device, setup->value);
cfg = device->curr_cfg;
......@@ -324,6 +356,9 @@ static rt_err_t _set_config(struct udevice* device, ureq_t setup)
cls->ops->run(device, cls);
}
device->state = USB_STATE_CONFIGURED;
_exit:
/* issue status stage */
dcd_send_status(device->dcd);
......@@ -349,6 +384,8 @@ static rt_err_t _set_address(struct udevice* device, ureq_t setup)
/* set address in device control driver */
dcd_set_address(device->dcd, setup->value);
device->state = USB_STATE_ADDRESS;
/* issue status stage */
dcd_send_status(device->dcd);
......@@ -382,7 +419,9 @@ static rt_err_t _request_interface(struct udevice* device, ureq_t setup)
ret = intf->handler(device, cls, setup);
}
else
{
ret = -RT_ERROR;
}
return ret;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册