/******************************************************************************* * Copyright (c) 2009, 2020 IBM Corp. and others * * All rights reserved. This program and the accompanying materials * are made available under the terms of the Eclipse Public License v2.0 * and Eclipse Distribution License v1.0 which accompany this distribution. * * The Eclipse Public License is available at * https://www.eclipse.org/legal/epl-2.0/ * and the Eclipse Distribution License is available at * http://www.eclipse.org/org/documents/edl-v10.php. * * Contributors: * Ian Craggs - initial API and implementation * Ian Craggs, Allan Stockdill-Mander - SSL connections * Ian Craggs - multiple server connection support * Ian Craggs - MQTT 3.1.1 support * Ian Craggs - fix for bug 444103 - success/failure callbacks not invoked * Ian Craggs - automatic reconnect and offline buffering (send while disconnected) * Ian Craggs - binary will message * Ian Craggs - binary password * Ian Craggs - remove const on eyecatchers #168 * Ian Craggs - MQTT 5.0 *******************************************************************************/ /********************************************************************/ /** * @cond MQTTAsync_main * @mainpage Asynchronous MQTT client library for C * * © Copyright IBM Corp. 2009, 2020 and others * * @brief An Asynchronous MQTT client library for C. * * An MQTT client application connects to MQTT-capable servers. * A typical client is responsible for collecting information from a telemetry * device and publishing the information to the server. It can also subscribe * to topics, receive messages, and use this information to control the * telemetry device. * * MQTT clients implement the published MQTT v3 protocol. You can write your own * API to the MQTT protocol using the programming language and platform of your * choice. This can be time-consuming and error-prone. * * To simplify writing MQTT client applications, this library encapsulates * the MQTT v3 protocol for you. Using this library enables a fully functional * MQTT client application to be written in a few lines of code. * The information presented here documents the API provided * by the Asynchronous MQTT Client library for C. * * Using the client
* Applications that use the client library typically use a similar structure: * * Some simple examples are shown here: * * Additional information about important concepts is provided here: * * @endcond */ /* /// @cond EXCLUDE */ #if !defined(MQTTASYNC_H) #define MQTTASYNC_H #if defined(__cplusplus) extern "C" { #endif #include /* /// @endcond */ #include "MQTTExportDeclarations.h" #include "MQTTProperties.h" #include "MQTTReasonCodes.h" #include "MQTTSubscribeOpts.h" #if !defined(NO_PERSISTENCE) #include "MQTTClientPersistence.h" #endif /** * Return code: No error. Indicates successful completion of an MQTT client * operation. */ #define MQTTASYNC_SUCCESS 0 /** * Return code: A generic error code indicating the failure of an MQTT client * operation. */ #define MQTTASYNC_FAILURE -1 /* error code -2 is MQTTAsync_PERSISTENCE_ERROR */ #define MQTTASYNC_PERSISTENCE_ERROR -2 /** * Return code: The client is disconnected. */ #define MQTTASYNC_DISCONNECTED -3 /** * Return code: The maximum number of messages allowed to be simultaneously * in-flight has been reached. */ #define MQTTASYNC_MAX_MESSAGES_INFLIGHT -4 /** * Return code: An invalid UTF-8 string has been detected. */ #define MQTTASYNC_BAD_UTF8_STRING -5 /** * Return code: A NULL parameter has been supplied when this is invalid. */ #define MQTTASYNC_NULL_PARAMETER -6 /** * Return code: The topic has been truncated (the topic string includes * embedded NULL characters). String functions will not access the full topic. * Use the topic length value to access the full topic. */ #define MQTTASYNC_TOPICNAME_TRUNCATED -7 /** * Return code: A structure parameter does not have the correct eyecatcher * and version number. */ #define MQTTASYNC_BAD_STRUCTURE -8 /** * Return code: A qos parameter is not 0, 1 or 2 */ #define MQTTASYNC_BAD_QOS -9 /** * Return code: All 65535 MQTT msgids are being used */ #define MQTTASYNC_NO_MORE_MSGIDS -10 /** * Return code: the request is being discarded when not complete */ #define MQTTASYNC_OPERATION_INCOMPLETE -11 /** * Return code: no more messages can be buffered */ #define MQTTASYNC_MAX_BUFFERED_MESSAGES -12 /** * Return code: Attempting SSL connection using non-SSL version of library */ #define MQTTASYNC_SSL_NOT_SUPPORTED -13 /** * Return code: protocol prefix in serverURI should be tcp://, ssl://, ws:// or wss:// * The TLS enabled prefixes (ssl, wss) are only valid if the TLS version of the library * is linked with. */ #define MQTTASYNC_BAD_PROTOCOL -14 /** * Return code: don't use options for another version of MQTT */ #define MQTTASYNC_BAD_MQTT_OPTION -15 /** * Return code: call not applicable to the client's version of MQTT */ #define MQTTASYNC_WRONG_MQTT_VERSION -16 /** * Return code: 0 length will topic */ #define MQTTASYNC_0_LEN_WILL_TOPIC -17 /** * Default MQTT version to connect with. Use 3.1.1 then fall back to 3.1 */ #define MQTTVERSION_DEFAULT 0 /** * MQTT version to connect with: 3.1 */ #define MQTTVERSION_3_1 3 /** * MQTT version to connect with: 3.1.1 */ #define MQTTVERSION_3_1_1 4 /** * MQTT version to connect with: 5 */ #define MQTTVERSION_5 5 /** * Bad return code from subscribe, as defined in the 3.1.1 specification */ #define MQTT_BAD_SUBSCRIBE 0x80 /** * Initialization options */ typedef struct { /** The eyecatcher for this structure. Must be MQTG. */ char struct_id[4]; /** The version number of this structure. Must be 0 */ int struct_version; /** 1 = we do openssl init, 0 = leave it to the application */ int do_openssl_init; } MQTTAsync_init_options; #define MQTTAsync_init_options_initializer { {'M', 'Q', 'T', 'G'}, 0, 0 } /** * Global init of mqtt library. Call once on program start to set global behaviour. * handle_openssl_init - if mqtt library should handle openssl init (1) or rely on the caller to init it before using mqtt (0) */ LIBMQTT_API void MQTTAsync_global_init(MQTTAsync_init_options* inits); /** * A handle representing an MQTT client. A valid client handle is available * following a successful call to MQTTAsync_create(). */ typedef void* MQTTAsync; /** * A value representing an MQTT message. A token is returned to the * client application when a message is published. The token can then be used to * check that the message was successfully delivered to its destination (see * MQTTAsync_publish(), * MQTTAsync_publishMessage(), * MQTTAsync_deliveryComplete(), and * MQTTAsync_getPendingTokens()). */ typedef int MQTTAsync_token; /** * A structure representing the payload and attributes of an MQTT message. The * message topic is not part of this structure (see MQTTAsync_publishMessage(), * MQTTAsync_publish(), MQTTAsync_receive(), MQTTAsync_freeMessage() * and MQTTAsync_messageArrived()). */ typedef struct { /** The eyecatcher for this structure. must be MQTM. */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1. * 0 indicates no message properties */ int struct_version; /** The length of the MQTT message payload in bytes. */ int payloadlen; /** A pointer to the payload of the MQTT message. */ void* payload; /** * The quality of service (QoS) assigned to the message. * There are three levels of QoS: *
*
QoS0
*
Fire and forget - the message may not be delivered
*
QoS1
*
At least once - the message will be delivered, but may be * delivered more than once in some circumstances.
*
QoS2
*
Once and one only - the message will be delivered exactly once.
*
*/ int qos; /** * The retained flag serves two purposes depending on whether the message * it is associated with is being published or received. * * retained = true
* For messages being published, a true setting indicates that the MQTT * server should retain a copy of the message. The message will then be * transmitted to new subscribers to a topic that matches the message topic. * For subscribers registering a new subscription, the flag being true * indicates that the received message is not a new one, but one that has * been retained by the MQTT server. * * retained = false
* For publishers, this indicates that this message should not be retained * by the MQTT server. For subscribers, a false setting indicates this is * a normal message, received as a result of it being published to the * server. */ int retained; /** * The dup flag indicates whether or not this message is a duplicate. * It is only meaningful when receiving QoS1 messages. When true, the * client application should take appropriate action to deal with the * duplicate message. */ int dup; /** The message identifier is normally reserved for internal use by the * MQTT client and server. */ int msgid; /** * The MQTT V5 properties associated with the message. */ MQTTProperties properties; } MQTTAsync_message; #define MQTTAsync_message_initializer { {'M', 'Q', 'T', 'M'}, 1, 0, NULL, 0, 0, 0, 0, MQTTProperties_initializer } /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * receipt of messages. The function is registered with the client library by * passing it as an argument to MQTTAsync_setCallbacks(). It is * called by the client library when a new message that matches a client * subscription has been received from the server. This function is executed on * a separate thread to the one on which the client application is running. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param topicName The topic associated with the received message. * @param topicLen The length of the topic if there are one * more NULL characters embedded in topicName, otherwise topicLen * is 0. If topicLen is 0, the value returned by strlen(topicName) * can be trusted. If topicLen is greater than 0, the full topic name * can be retrieved by accessing topicName as a byte array of length * topicLen. * @param message The MQTTAsync_message structure for the received message. * This structure contains the message payload and attributes. * @return This function must return 0 or 1 indicating whether or not * the message has been safely received by the client application.
* Returning 1 indicates that the message has been successfully handled. * To free the message storage, ::MQTTAsync_freeMessage must be called. * To free the topic name storage, ::MQTTAsync_free must be called.
* Returning 0 indicates that there was a problem. In this * case, the client library will reinvoke MQTTAsync_messageArrived() to * attempt to deliver the message to the application again. * Do not free the message and topic storage when returning 0, otherwise * the redelivery will fail. */ typedef int MQTTAsync_messageArrived(void* context, char* topicName, int topicLen, MQTTAsync_message* message); /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of delivery of messages to the server. The function is * registered with the client library by passing it as an argument to MQTTAsync_setCallbacks(). * It is called by the client library after the client application has * published a message to the server. It indicates that the necessary * handshaking and acknowledgements for the requested quality of service (see * MQTTAsync_message.qos) have been completed. This function is executed on a * separate thread to the one on which the client application is running. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param token The ::MQTTAsync_token associated with * the published message. Applications can check that all messages have been * correctly published by matching the tokens returned from calls to * MQTTAsync_send() and MQTTAsync_sendMessage() with the tokens passed * to this callback. */ typedef void MQTTAsync_deliveryComplete(void* context, MQTTAsync_token token); /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of the loss of connection to the server. The function is * registered with the client library by passing it as an argument to * MQTTAsync_setCallbacks(). It is called by the client library if the client * loses its connection to the server. The client application must take * appropriate action, such as trying to reconnect or reporting the problem. * This function is executed on a separate thread to the one on which the * client application is running. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param cause The reason for the disconnection. * Currently, cause is always set to NULL. */ typedef void MQTTAsync_connectionLost(void* context, char* cause); /** * This is a callback function, which will be called when the client * library successfully connects. This is superfluous when the connection * is made in response to a MQTTAsync_connect call, because the onSuccess * callback can be used. It is intended for use when automatic reconnect * is enabled, so that when a reconnection attempt succeeds in the background, * the application is notified and can take any required actions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param cause The reason for the disconnection. * Currently, cause is always set to NULL. */ typedef void MQTTAsync_connected(void* context, char* cause); /** * This is a callback function, which will be called when the client * library receives a disconnect packet. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * MQTTAsync_setCallbacks(), which contains any application-specific context. * @param properties the properties in the disconnect packet. * @param properties the reason code from the disconnect packet * Currently, cause is always set to NULL. */ typedef void MQTTAsync_disconnected(void* context, MQTTProperties* properties, enum MQTTReasonCodes reasonCode); /** * Sets the MQTTAsync_disconnected() callback function for a client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to any application-specific context. The * the context pointer is passed to each of the callback functions to * provide access to the context information in the callback. * @param co A pointer to an MQTTAsync_connected() callback * function. NULL removes the callback setting. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setDisconnected(MQTTAsync handle, void* context, MQTTAsync_disconnected* co); /** The data returned on completion of an unsuccessful API call in the response callback onFailure. */ typedef struct { /** A token identifying the failed request. */ MQTTAsync_token token; /** A numeric code identifying the error. */ int code; /** Optional text explaining the error. Can be NULL. */ const char *message; } MQTTAsync_failureData; /** The data returned on completion of an unsuccessful API call in the response callback onFailure. */ typedef struct { /** The eyecatcher for this structure. Will be MQFD. */ char struct_id[4]; /** The version number of this structure. Will be 0 */ int struct_version; /** A token identifying the failed request. */ MQTTAsync_token token; /** The MQTT reason code returned. */ enum MQTTReasonCodes reasonCode; /** The MQTT properties on the ack, if any. */ MQTTProperties properties; /** A numeric code identifying the MQTT client library error. */ int code; /** Optional further text explaining the error. Can be NULL. */ const char *message; /** Packet type on which the failure occurred - used for publish QoS 1/2 exchanges*/ int packet_type; } MQTTAsync_failureData5; #define MQTTAsync_failureData5_initializer {{'M', 'Q', 'F', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer, 0, NULL} /** The data returned on completion of a successful API call in the response callback onSuccess. */ typedef struct { /** A token identifying the successful request. Can be used to refer to the request later. */ MQTTAsync_token token; /** A union of the different values that can be returned for subscribe, unsubscribe and publish. */ union { /** For subscribe, the granted QoS of the subscription returned by the server. * Also for subscribeMany, if only 1 subscription was requested. */ int qos; /** For subscribeMany, if more than one subscription was requested, * the list of granted QoSs of the subscriptions returned by the server. */ int* qosList; /** For publish, the message being sent to the server. */ struct { MQTTAsync_message message; /**< the message being sent to the server */ char* destinationName; /**< the topic destination for the message */ } pub; /* For connect, the server connected to, MQTT version used, and sessionPresent flag */ struct { char* serverURI; /**< the connection string of the server */ int MQTTVersion; /**< the version of MQTT being used */ int sessionPresent; /**< the session present flag returned from the server */ } connect; } alt; } MQTTAsync_successData; /** The data returned on completion of a successful API call in the response callback onSuccess. */ typedef struct { char struct_id[4]; /**< The eyecatcher for this structure. Will be MQSD. */ int struct_version; /**< The version number of this structure. Will be 0 */ /** A token identifying the successful request. Can be used to refer to the request later. */ MQTTAsync_token token; enum MQTTReasonCodes reasonCode; /**< MQTT V5 reason code returned */ MQTTProperties properties; /**< MQTT V5 properties returned, if any */ /** A union of the different values that can be returned for subscribe, unsubscribe and publish. */ union { /** For subscribeMany, the list of reasonCodes returned by the server. */ struct { int reasonCodeCount; /**< the number of reason codes in the reasonCodes array */ enum MQTTReasonCodes* reasonCodes; /**< an array of reasonCodes */ } sub; /** For publish, the message being sent to the server. */ struct { MQTTAsync_message message; /**< the message being sent to the server */ char* destinationName; /**< the topic destination for the message */ } pub; /* For connect, the server connected to, MQTT version used, and sessionPresent flag */ struct { char* serverURI; /**< the connection string of the server */ int MQTTVersion; /**< the version of MQTT being used */ int sessionPresent; /**< the session present flag returned from the server */ } connect; /** For unsubscribeMany, the list of reasonCodes returned by the server. */ struct { int reasonCodeCount; /**< the number of reason codes in the reasonCodes array */ enum MQTTReasonCodes* reasonCodes; /**< an array of reasonCodes */ } unsub; } alt; } MQTTAsync_successData5; #define MQTTAsync_successData5_initializer {{'M', 'Q', 'S', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer} /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of the successful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Any success data associated with the API completion. */ typedef void MQTTAsync_onSuccess(void* context, MQTTAsync_successData* response); /** * This is a callback function, the MQTT V5 version of ::MQTTAsync_onSuccess. * The client application * must provide an implementation of this function to enable asynchronous * notification of the successful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Any success data associated with the API completion. */ typedef void MQTTAsync_onSuccess5(void* context, MQTTAsync_successData5* response); /** * This is a callback function. The client application * must provide an implementation of this function to enable asynchronous * notification of the unsuccessful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Failure data associated with the API completion. */ typedef void MQTTAsync_onFailure(void* context, MQTTAsync_failureData* response); /** * This is a callback function, the MQTT V5 version of ::MQTTAsync_onFailure. * The application must provide an implementation of this function to enable asynchronous * notification of the unsuccessful completion of an API call. The function is * registered with the client library by passing it as an argument in * ::MQTTAsync_responseOptions. * * Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be * called within this callback. * @param context A pointer to the context value originally passed to * ::MQTTAsync_responseOptions, which contains any application-specific context. * @param response Failure data associated with the API completion. */ typedef void MQTTAsync_onFailure5(void* context, MQTTAsync_failureData5* response); /** Structure to define call options. For MQTT 5.0 there is input data as well as that * describing the response method. So there is now also a synonym ::MQTTAsync_callOptions * to better reflect the use. This responseOptions name is kept for backward * compatibility. */ typedef struct MQTTAsync_responseOptions { /** The eyecatcher for this structure. Must be MQTR */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1 * if 0, no MQTTV5 options */ int struct_version; /** * A pointer to a callback function to be called if the API call successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess* onSuccess; /** * A pointer to a callback function to be called if the API call fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure* onFailure; /** * A pointer to any application-specific context. The * the context pointer is passed to success or failure callback functions to * provide access to the context information in the callback. */ void* context; /** * A token is returned from the call. It can be used to track * the state of this request, both in the callbacks and in future calls * such as ::MQTTAsync_waitForCompletion. */ MQTTAsync_token token; /** * A pointer to a callback function to be called if the API call successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess5* onSuccess5; /** * A pointer to a callback function to be called if the API call successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onFailure5* onFailure5; /** * MQTT V5 input properties */ MQTTProperties properties; /* * MQTT V5 subscribe options, when used with subscribe only. */ MQTTSubscribe_options subscribeOptions; /* * MQTT V5 subscribe option count, when used with subscribeMany only. * The number of entries in the subscribe_options_list array. */ int subscribeOptionsCount; /* * MQTT V5 subscribe option array, when used with subscribeMany only. */ MQTTSubscribe_options* subscribeOptionsList; } MQTTAsync_responseOptions; #define MQTTAsync_responseOptions_initializer { {'M', 'Q', 'T', 'R'}, 1, NULL, NULL, 0, 0, NULL, NULL, MQTTProperties_initializer, MQTTSubscribe_options_initializer, 0, NULL} /** A synonym for responseOptions to better reflect its usage since MQTT 5.0 */ typedef struct MQTTAsync_responseOptions MQTTAsync_callOptions; #define MQTTAsync_callOptions_initializer MQTTAsync_responseOptions_initializer /** * This function sets the global callback functions for a specific client. * If your client application doesn't use a particular callback, set the * relevant parameter to NULL. Any necessary message acknowledgements and * status communications are handled in the background without any intervention * from the client application. If you do not set a messageArrived callback * function, you will not be notified of the receipt of any messages as a * result of a subscription. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to each of the callback functions to * provide access to the context information in the callback. * @param cl A pointer to an MQTTAsync_connectionLost() callback * function. You can set this to NULL if your application doesn't handle * disconnections. * @param ma A pointer to an MQTTAsync_messageArrived() callback * function. You can set this to NULL if your application doesn't handle * receipt of messages. * @param dc A pointer to an MQTTAsync_deliveryComplete() callback * function. You can set this to NULL if you do not want to check * for successful delivery. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setCallbacks(MQTTAsync handle, void* context, MQTTAsync_connectionLost* cl, MQTTAsync_messageArrived* ma, MQTTAsync_deliveryComplete* dc); /** * This function sets the callback function for a connection lost event for * a specific client. Any necessary message acknowledgements and status * communications are handled in the background without any intervention * from the client application. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed the callback functions to provide * access to the context information in the callback. * @param cl A pointer to an MQTTAsync_connectionLost() callback * function. You can set this to NULL if your application doesn't handle * disconnections. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setConnectionLostCallback(MQTTAsync handle, void* context, MQTTAsync_connectionLost* cl); /** * This function sets the callback function for a message arrived event for * a specific client. Any necessary message acknowledgements and status * communications are handled in the background without any intervention * from the client application. If you do not set a messageArrived callback * function, you will not be notified of the receipt of any messages as a * result of a subscription. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to the callback functions to provide * access to the context information in the callback. * @param ma A pointer to an MQTTAsync_messageArrived() callback * function. You can set this to NULL if your application doesn't handle * receipt of messages. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setMessageArrivedCallback(MQTTAsync handle, void* context, MQTTAsync_messageArrived* ma); /** * This function sets the callback function for a delivery complete event * for a specific client. Any necessary message acknowledgements and status * communications are handled in the background without any intervention * from the client application. * * Note: The MQTT client must be disconnected when this function is * called. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to the callback functions to provide * access to the context information in the callback. * @param dc A pointer to an MQTTAsync_deliveryComplete() callback * function. You can set this to NULL if you do not want to check * for successful delivery. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setDeliveryCompleteCallback(MQTTAsync handle, void* context, MQTTAsync_deliveryComplete* dc); /** * Sets the MQTTAsync_connected() callback function for a client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param context A pointer to any application-specific context. The * the context pointer is passed to each of the callback functions to * provide access to the context information in the callback. * @param co A pointer to an MQTTAsync_connected() callback * function. NULL removes the callback setting. * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_setConnected(MQTTAsync handle, void* context, MQTTAsync_connected* co); /** * Reconnects a client with the previously used connect options. Connect * must have previously been called for this to work. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @return ::MQTTASYNC_SUCCESS if the callbacks were correctly set, * ::MQTTASYNC_FAILURE if an error occurred. */ LIBMQTT_API int MQTTAsync_reconnect(MQTTAsync handle); /** * This function creates an MQTT client ready for connection to the * specified server and using the specified persistent storage (see * MQTTAsync_persistence). See also MQTTAsync_destroy(). * @param handle A pointer to an ::MQTTAsync handle. The handle is * populated with a valid client reference following a successful return from * this function. * @param serverURI A null-terminated string specifying the server to * which the client will connect. It takes the form protocol://host:port. * protocol must be tcp or ssl. For host, you can * specify either an IP address or a host name. For instance, to connect to * a server running on the local machines with the default MQTT port, specify * tcp://localhost:1883. * @param clientId The client identifier passed to the server when the * client connects to it. It is a null-terminated UTF-8 encoded string. * @param persistence_type The type of persistence to be used by the client: *
* ::MQTTCLIENT_PERSISTENCE_NONE: Use in-memory persistence. If the device or * system on which the client is running fails or is switched off, the current * state of any in-flight messages is lost and some messages may not be * delivered even at QoS1 and QoS2. *
* ::MQTTCLIENT_PERSISTENCE_DEFAULT: Use the default (file system-based) * persistence mechanism. Status about in-flight messages is held in persistent * storage and provides some protection against message loss in the case of * unexpected failure. *
* ::MQTTCLIENT_PERSISTENCE_USER: Use an application-specific persistence * implementation. Using this type of persistence gives control of the * persistence mechanism to the application. The application has to implement * the MQTTClient_persistence interface. * @param persistence_context If the application uses * ::MQTTCLIENT_PERSISTENCE_NONE persistence, this argument is unused and should * be set to NULL. For ::MQTTCLIENT_PERSISTENCE_DEFAULT persistence, it * should be set to the location of the persistence directory (if set * to NULL, the persistence directory used is the working directory). * Applications that use ::MQTTCLIENT_PERSISTENCE_USER persistence set this * argument to point to a valid MQTTClient_persistence structure. * @return ::MQTTASYNC_SUCCESS if the client is successfully created, otherwise * an error code is returned. */ LIBMQTT_API int MQTTAsync_create(MQTTAsync* handle, const char* serverURI, const char* clientId, int persistence_type, void* persistence_context); /** Options for the ::MQTTAsync_createWithOptions call */ typedef struct { /** The eyecatcher for this structure. must be MQCO. */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1 * 0 means no MQTTVersion */ int struct_version; /** Whether to allow messages to be sent when the client library is not connected. */ int sendWhileDisconnected; /** the maximum number of messages allowed to be buffered while not connected. */ int maxBufferedMessages; /** Whether the MQTT version is 3.1, 3.1.1, or 5. To use V5, this must be set. * MQTT V5 has to be chosen here, because during the create call the message persistence * is initialized, and we want to know whether the format of any persisted messages * is appropriate for the MQTT version we are going to connect with. Selecting 3.1 or * 3.1.1 and attempting to read 5.0 persisted messages will result in an error on create. */ int MQTTVersion; } MQTTAsync_createOptions; #define MQTTAsync_createOptions_initializer { {'M', 'Q', 'C', 'O'}, 1, 0, 100, MQTTVERSION_DEFAULT } #define MQTTAsync_createOptions_initializer5 { {'M', 'Q', 'C', 'O'}, 1, 0, 100, MQTTVERSION_5 } LIBMQTT_API int MQTTAsync_createWithOptions(MQTTAsync* handle, const char* serverURI, const char* clientId, int persistence_type, void* persistence_context, MQTTAsync_createOptions* options); /** * MQTTAsync_willOptions defines the MQTT "Last Will and Testament" (LWT) settings for * the client. In the event that a client unexpectedly loses its connection to * the server, the server publishes the LWT message to the LWT topic on * behalf of the client. This allows other clients (subscribed to the LWT topic) * to be made aware that the client has disconnected. To enable the LWT * function for a specific client, a valid pointer to an MQTTAsync_willOptions * structure is passed in the MQTTAsync_connectOptions structure used in the * MQTTAsync_connect() call that connects the client to the server. The pointer * to MQTTAsync_willOptions can be set to NULL if the LWT function is not * required. */ typedef struct { /** The eyecatcher for this structure. must be MQTW. */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1 0 indicates no binary will message support */ int struct_version; /** The LWT topic to which the LWT message will be published. */ const char* topicName; /** The LWT payload. */ const char* message; /** * The retained flag for the LWT message (see MQTTAsync_message.retained). */ int retained; /** * The quality of service setting for the LWT message (see * MQTTAsync_message.qos and @ref qos). */ int qos; /** The LWT payload in binary form. This is only checked and used if the message option is NULL */ struct { int len; /**< binary payload length */ const void* data; /**< binary payload data */ } payload; } MQTTAsync_willOptions; #define MQTTAsync_willOptions_initializer { {'M', 'Q', 'T', 'W'}, 1, NULL, NULL, 0, 0, { 0, NULL } } #define MQTT_SSL_VERSION_DEFAULT 0 #define MQTT_SSL_VERSION_TLS_1_0 1 #define MQTT_SSL_VERSION_TLS_1_1 2 #define MQTT_SSL_VERSION_TLS_1_2 3 /** * MQTTAsync_sslProperties defines the settings to establish an SSL/TLS connection using the * OpenSSL library. It covers the following scenarios: * - Server authentication: The client needs the digital certificate of the server. It is included * in a store containting trusted material (also known as "trust store"). * - Mutual authentication: Both client and server are authenticated during the SSL handshake. In * addition to the digital certificate of the server in a trust store, the client will need its own * digital certificate and the private key used to sign its digital certificate stored in a "key store". * - Anonymous connection: Both client and server do not get authenticated and no credentials are needed * to establish an SSL connection. Note that this scenario is not fully secure since it is subject to * man-in-the-middle attacks. */ typedef struct { /** The eyecatcher for this structure. Must be MQTS */ char struct_id[4]; /** The version number of this structure. Must be 0, or 1 to enable TLS version selection. */ int struct_version; /** The file in PEM format containing the public digital certificates trusted by the client. */ const char* trustStore; /** The file in PEM format containing the public certificate chain of the client. It may also include * the client's private key. */ const char* keyStore; /** If not included in the sslKeyStore, this setting points to the file in PEM format containing * the client's private key. */ const char* privateKey; /** The password to load the client's privateKey if encrypted. */ const char* privateKeyPassword; /** * The list of cipher suites that the client will present to the server during the SSL handshake. For a * full explanation of the cipher list format, please see the OpenSSL on-line documentation: * http://www.openssl.org/docs/apps/ciphers.html#CIPHER_LIST_FORMAT * If this setting is ommitted, its default value will be "ALL", that is, all the cipher suites -excluding * those offering no encryption- will be considered. * This setting can be used to set an SSL anonymous connection ("aNULL" string value, for instance). */ const char* enabledCipherSuites; /** True/False option to enable verification of the server certificate **/ int enableServerCertAuth; /** The SSL/TLS version to use. Specify one of MQTT_SSL_VERSION_DEFAULT (0), * MQTT_SSL_VERSION_TLS_1_0 (1), MQTT_SSL_VERSION_TLS_1_1 (2) or MQTT_SSL_VERSION_TLS_1_2 (3). * Only used if struct_version is >= 1. */ int sslVersion; /** * Whether to carry out post-connect checks, including that a certificate * matches the given host name. * Exists only if struct_version >= 2 */ int verify; /** * From the OpenSSL documentation: * If CApath is not NULL, it points to a directory containing CA certificates in PEM format. * Exists only if struct_version >= 2 */ const char* CApath; /** * Callback function for OpenSSL error handler ERR_print_errors_cb * Exists only if struct_version >= 3 */ int (*ssl_error_cb) (const char *str, size_t len, void *u); /** * Application-specific contex for OpenSSL error handler ERR_print_errors_cb * Exists only if struct_version >= 3 */ void* ssl_error_context; /** * Callback function for setting TLS-PSK options. Parameters correspond to that of * SSL_CTX_set_psk_client_callback, except for u which is the pointer ssl_psk_context. * Exists only if struct_version >= 4 */ unsigned int (*ssl_psk_cb) (const char *hint, char *identity, unsigned int max_identity_len, unsigned char *psk, unsigned int max_psk_len, void *u); /** * Application-specific contex for ssl_psk_cb * Exists only if struct_version >= 4 */ void* ssl_psk_context; /** * Don't load default SSL CA. Should be used together with PSK to make sure * regular servers with certificate in place is not accepted. * Exists only if struct_version >= 4 */ int disableDefaultTrustStore; } MQTTAsync_SSLOptions; #define MQTTAsync_SSLOptions_initializer { {'M', 'Q', 'T', 'S'}, 4, NULL, NULL, NULL, NULL, NULL, 1, MQTT_SSL_VERSION_DEFAULT, 0, NULL, NULL, NULL, NULL, NULL, 0} /** Utility structure where name/value pairs are needed */ typedef struct { const char* name; /**< name string */ const char* value; /**< value string */ } MQTTAsync_nameValue; /** * MQTTAsync_connectOptions defines several settings that control the way the * client connects to an MQTT server. Default values are set in * MQTTAsync_connectOptions_initializer. */ typedef struct { /** The eyecatcher for this structure. must be MQTC. */ char struct_id[4]; /** The version number of this structure. Must be 0, 1, 2, 3 4 5 or 6. * 0 signifies no SSL options and no serverURIs * 1 signifies no serverURIs * 2 signifies no MQTTVersion * 3 signifies no automatic reconnect options * 4 signifies no binary password option (just string) * 5 signifies no MQTTV5 properties * 6 signifies no HTTP headers option */ int struct_version; /** The "keep alive" interval, measured in seconds, defines the maximum time * that should pass without communication between the client and the server * The client will ensure that at least one message travels across the * network within each keep alive period. In the absence of a data-related * message during the time period, the client sends a very small MQTT * "ping" message, which the server will acknowledge. The keep alive * interval enables the client to detect when the server is no longer * available without having to wait for the long TCP/IP timeout. * Set to 0 if you do not want any keep alive processing. */ int keepAliveInterval; /** * This is a boolean value. The cleansession setting controls the behaviour * of both the client and the server at connection and disconnection time. * The client and server both maintain session state information. This * information is used to ensure "at least once" and "exactly once" * delivery, and "exactly once" receipt of messages. Session state also * includes subscriptions created by an MQTT client. You can choose to * maintain or discard state information between sessions. * * When cleansession is true, the state information is discarded at * connect and disconnect. Setting cleansession to false keeps the state * information. When you connect an MQTT client application with * MQTTAsync_connect(), the client identifies the connection using the * client identifier and the address of the server. The server checks * whether session information for this client * has been saved from a previous connection to the server. If a previous * session still exists, and cleansession=true, then the previous session * information at the client and server is cleared. If cleansession=false, * the previous session is resumed. If no previous session exists, a new * session is started. */ int cleansession; /** * This controls how many messages can be in-flight simultaneously. */ int maxInflight; /** * This is a pointer to an MQTTAsync_willOptions structure. If your * application does not make use of the Last Will and Testament feature, * set this pointer to NULL. */ MQTTAsync_willOptions* will; /** * MQTT servers that support the MQTT v3.1 protocol provide authentication * and authorisation by user name and password. This is the user name * parameter. */ const char* username; /** * MQTT servers that support the MQTT v3.1 protocol provide authentication * and authorisation by user name and password. This is the password * parameter. */ const char* password; /** * The time interval in seconds to allow a connect to complete. */ int connectTimeout; /** * The time interval in seconds after which unacknowledged publish requests are * retried during a TCP session. With MQTT 3.1.1 and later, retries are * not required except on reconnect. 0 turns off in-session retries, and is the * recommended setting. Adding retries to an already overloaded network only * exacerbates the problem. */ int retryInterval; /** * This is a pointer to an MQTTAsync_SSLOptions structure. If your * application does not make use of SSL, set this pointer to NULL. */ MQTTAsync_SSLOptions* ssl; /** * A pointer to a callback function to be called if the connect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess* onSuccess; /** * A pointer to a callback function to be called if the connect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure* onFailure; /** * A pointer to any application-specific context. The * the context pointer is passed to success or failure callback functions to * provide access to the context information in the callback. */ void* context; /** * The number of entries in the serverURIs array. */ int serverURIcount; /** * An array of null-terminated strings specifying the servers to * which the client will connect. Each string takes the form protocol://host:port. * protocol must be tcp or ssl. For host, you can * specify either an IP address or a domain name. For instance, to connect to * a server running on the local machines with the default MQTT port, specify * tcp://localhost:1883. */ char* const* serverURIs; /** * Sets the version of MQTT to be used on the connect. * MQTTVERSION_DEFAULT (0) = default: start with 3.1.1, and if that fails, fall back to 3.1 * MQTTVERSION_3_1 (3) = only try version 3.1 * MQTTVERSION_3_1_1 (4) = only try version 3.1.1 */ int MQTTVersion; /** * Reconnect automatically in the case of a connection being lost? */ int automaticReconnect; /** * Minimum retry interval in seconds. Doubled on each failed retry. */ int minRetryInterval; /** * Maximum retry interval in seconds. The doubling stops here on failed retries. */ int maxRetryInterval; /** * Optional binary password. Only checked and used if the password option is NULL */ struct { int len; /**< binary password length */ const void* data; /**< binary password data */ } binarypwd; /** * httpHeaders */ const MQTTAsync_nameValue* httpHeaders; /* * MQTT V5 clean start flag. Only clears state at the beginning of the session. */ int cleanstart; /** * MQTT V5 properties for connect */ MQTTProperties *connectProperties; /** * MQTT V5 properties for the will message in the connect */ MQTTProperties *willProperties; /** * A pointer to a callback function to be called if the connect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess5* onSuccess5; /** * A pointer to a callback function to be called if the connect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure5* onFailure5; } MQTTAsync_connectOptions; #define MQTTAsync_connectOptions_initializer { {'M', 'Q', 'T', 'C'}, 7, 60, 1, 65535, NULL, NULL, NULL, 30, 0,\ NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_DEFAULT, 0, 1, 60, {0, NULL}, NULL, 0, NULL, NULL, NULL, NULL} #define MQTTAsync_connectOptions_initializer5 { {'M', 'Q', 'T', 'C'}, 7, 60, 0, 65535, NULL, NULL, NULL, 30, 0,\ NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_5, 0, 1, 60, {0, NULL}, NULL, 1, NULL, NULL, NULL, NULL} /** * This function attempts to connect a previously-created client (see * MQTTAsync_create()) to an MQTT server using the specified options. If you * want to enable asynchronous message and status notifications, you must call * MQTTAsync_setCallbacks() prior to MQTTAsync_connect(). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param options A pointer to a valid MQTTAsync_connectOptions * structure. * @return ::MQTTASYNC_SUCCESS if the client connect request was accepted. * If the client was unable to connect to the server, an error code is * returned via the onFailure callback, if set. * Error codes greater than 0 are returned by the MQTT protocol:

* 1: Connection refused: Unacceptable protocol version
* 2: Connection refused: Identifier rejected
* 3: Connection refused: Server unavailable
* 4: Connection refused: Bad user name or password
* 5: Connection refused: Not authorized
* 6-255: Reserved for future use
*/ LIBMQTT_API int MQTTAsync_connect(MQTTAsync handle, const MQTTAsync_connectOptions* options); /** Options for the ::MQTTAsync_disconnect call */ typedef struct { /** The eyecatcher for this structure. Must be MQTD. */ char struct_id[4]; /** The version number of this structure. Must be 0 or 1. 0 signifies no V5 properties */ int struct_version; /** * The client delays disconnection for up to this time (in * milliseconds) in order to allow in-flight message transfers to complete. */ int timeout; /** * A pointer to a callback function to be called if the disconnect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess* onSuccess; /** * A pointer to a callback function to be called if the disconnect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure* onFailure; /** * A pointer to any application-specific context. The * the context pointer is passed to success or failure callback functions to * provide access to the context information in the callback. */ void* context; /** * MQTT V5 input properties */ MQTTProperties properties; /** * Reason code for MQTTV5 disconnect */ enum MQTTReasonCodes reasonCode; /** * A pointer to a callback function to be called if the disconnect successfully * completes. Can be set to NULL, in which case no indication of successful * completion will be received. */ MQTTAsync_onSuccess5* onSuccess5; /** * A pointer to a callback function to be called if the disconnect fails. * Can be set to NULL, in which case no indication of unsuccessful * completion will be received. */ MQTTAsync_onFailure5* onFailure5; } MQTTAsync_disconnectOptions; #define MQTTAsync_disconnectOptions_initializer { {'M', 'Q', 'T', 'D'}, 0, 0, NULL, NULL, NULL,\ MQTTProperties_initializer, MQTTREASONCODE_SUCCESS, NULL, NULL } #define MQTTAsync_disconnectOptions_initializer5 { {'M', 'Q', 'T', 'D'}, 1, 0, NULL, NULL, NULL,\ MQTTProperties_initializer, MQTTREASONCODE_SUCCESS, NULL, NULL } /** * This function attempts to disconnect the client from the MQTT * server. In order to allow the client time to complete handling of messages * that are in-flight when this function is called, a timeout period is * specified. When the timeout period has expired, the client disconnects even * if there are still outstanding message acknowledgements. * The next time the client connects to the same server, any QoS 1 or 2 * messages which have not completed will be retried depending on the * cleansession settings for both the previous and the new connection (see * MQTTAsync_connectOptions.cleansession and MQTTAsync_connect()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param options The client delays disconnection for up to this time (in * milliseconds) in order to allow in-flight message transfers to complete. * @return ::MQTTASYNC_SUCCESS if the client successfully disconnects from * the server. An error code is returned if the client was unable to disconnect * from the server */ LIBMQTT_API int MQTTAsync_disconnect(MQTTAsync handle, const MQTTAsync_disconnectOptions* options); /** * This function allows the client application to test whether or not a * client is currently connected to the MQTT server. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @return Boolean true if the client is connected, otherwise false. */ LIBMQTT_API int MQTTAsync_isConnected(MQTTAsync handle); /** * This function attempts to subscribe a client to a single topic, which may * contain wildcards (see @ref wildcard). This call also specifies the * @ref qos requested for the subscription * (see also MQTTAsync_subscribeMany()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param topic The subscription topic, which may include wildcards. * @param qos The requested quality of service for the subscription. * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscription request is successful. * An error code is returned if there was a problem registering the * subscription. */ LIBMQTT_API int MQTTAsync_subscribe(MQTTAsync handle, const char* topic, int qos, MQTTAsync_responseOptions* response); /** * This function attempts to subscribe a client to a list of topics, which may * contain wildcards (see @ref wildcard). This call also specifies the * @ref qos requested for each topic (see also MQTTAsync_subscribe()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param count The number of topics for which the client is requesting * subscriptions. * @param topic An array (of length count) of pointers to * topics, each of which may include wildcards. * @param qos An array (of length count) of @ref qos * values. qos[n] is the requested QoS for topic[n]. * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscription request is successful. * An error code is returned if there was a problem registering the * subscriptions. */ LIBMQTT_API int MQTTAsync_subscribeMany(MQTTAsync handle, int count, char* const* topic, int* qos, MQTTAsync_responseOptions* response); /** * This function attempts to remove an existing subscription made by the * specified client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param topic The topic for the subscription to be removed, which may * include wildcards (see @ref wildcard). * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscription is removed. * An error code is returned if there was a problem removing the * subscription. */ LIBMQTT_API int MQTTAsync_unsubscribe(MQTTAsync handle, const char* topic, MQTTAsync_responseOptions* response); /** * This function attempts to remove existing subscriptions to a list of topics * made by the specified client. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param count The number subscriptions to be removed. * @param topic An array (of length count) of pointers to the topics of * the subscriptions to be removed, each of which may include wildcards. * @param response A pointer to a response options structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the subscriptions are removed. * An error code is returned if there was a problem removing the subscriptions. */ LIBMQTT_API int MQTTAsync_unsubscribeMany(MQTTAsync handle, int count, char* const* topic, MQTTAsync_responseOptions* response); /** * This function attempts to publish a message to a given topic (see also * ::MQTTAsync_sendMessage()). An ::MQTTAsync_token is issued when * this function returns successfully. If the client application needs to * test for successful delivery of messages, a callback should be set * (see ::MQTTAsync_onSuccess() and ::MQTTAsync_deliveryComplete()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param destinationName The topic associated with this message. * @param payloadlen The length of the payload in bytes. * @param payload A pointer to the byte array payload of the message. * @param qos The @ref qos of the message. * @param retained The retained flag for the message. * @param response A pointer to an ::MQTTAsync_responseOptions structure. Used to set callback functions. * This is optional and can be set to NULL. * @return ::MQTTASYNC_SUCCESS if the message is accepted for publication. * An error code is returned if there was a problem accepting the message. */ LIBMQTT_API int MQTTAsync_send(MQTTAsync handle, const char* destinationName, int payloadlen, const void* payload, int qos, int retained, MQTTAsync_responseOptions* response); /** * This function attempts to publish a message to a given topic (see also * MQTTAsync_publish()). An ::MQTTAsync_token is issued when * this function returns successfully. If the client application needs to * test for successful delivery of messages, a callback should be set * (see ::MQTTAsync_onSuccess() and ::MQTTAsync_deliveryComplete()). * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param destinationName The topic associated with this message. * @param msg A pointer to a valid MQTTAsync_message structure containing * the payload and attributes of the message to be published. * @param response A pointer to an ::MQTTAsync_responseOptions structure. Used to set callback functions. * @return ::MQTTASYNC_SUCCESS if the message is accepted for publication. * An error code is returned if there was a problem accepting the message. */ LIBMQTT_API int MQTTAsync_sendMessage(MQTTAsync handle, const char* destinationName, const MQTTAsync_message* msg, MQTTAsync_responseOptions* response); /** * This function sets a pointer to an array of tokens for * messages that are currently in-flight (pending completion). * * Important note: The memory used to hold the array of tokens is * malloc()'d in this function. The client application is responsible for * freeing this memory when it is no longer required. * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param tokens The address of a pointer to an ::MQTTAsync_token. * When the function returns successfully, the pointer is set to point to an * array of tokens representing messages pending completion. The last member of * the array is set to -1 to indicate there are no more tokens. If no tokens * are pending, the pointer is set to NULL. * @return ::MQTTASYNC_SUCCESS if the function returns successfully. * An error code is returned if there was a problem obtaining the list of * pending tokens. */ LIBMQTT_API int MQTTAsync_getPendingTokens(MQTTAsync handle, MQTTAsync_token **tokens); /** * Tests whether a request corresponding to a token is complete. * * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param token An ::MQTTAsync_token associated with a request. * @return 1 if the request has been completed, 0 if not. */ #define MQTTASYNC_TRUE 1 LIBMQTT_API int MQTTAsync_isComplete(MQTTAsync handle, MQTTAsync_token token); /** * Waits for a request corresponding to a token to complete. * * @param handle A valid client handle from a successful call to * MQTTAsync_create(). * @param token An ::MQTTAsync_token associated with a request. * @param timeout the maximum time to wait for completion, in milliseconds * @return ::MQTTASYNC_SUCCESS if the request has been completed in the time allocated, * ::MQTTASYNC_FAILURE if not. */ LIBMQTT_API int MQTTAsync_waitForCompletion(MQTTAsync handle, MQTTAsync_token token, unsigned long timeout); /** * This function frees memory allocated to an MQTT message, including the * additional memory allocated to the message payload. The client application * calls this function when the message has been fully processed. Important * note: This function does not free the memory allocated to a message * topic string. It is the responsibility of the client application to free * this memory using the MQTTAsync_free() library function. * @param msg The address of a pointer to the ::MQTTAsync_message structure * to be freed. */ LIBMQTT_API void MQTTAsync_freeMessage(MQTTAsync_message** msg); /** * This function frees memory allocated by the MQTT C client library, especially the * topic name. This is needed on Windows when the client libary and application * program have been compiled with different versions of the C compiler. It is * thus good policy to always use this function when freeing any MQTT C client- * allocated memory. * @param ptr The pointer to the client library storage to be freed. */ LIBMQTT_API void MQTTAsync_free(void* ptr); /** * This function frees the memory allocated to an MQTT client (see * MQTTAsync_create()). It should be called when the client is no longer * required. * @param handle A pointer to the handle referring to the ::MQTTAsync * structure to be freed. */ LIBMQTT_API void MQTTAsync_destroy(MQTTAsync* handle); enum MQTTASYNC_TRACE_LEVELS { MQTTASYNC_TRACE_MAXIMUM = 1, MQTTASYNC_TRACE_MEDIUM, MQTTASYNC_TRACE_MINIMUM, MQTTASYNC_TRACE_PROTOCOL, MQTTASYNC_TRACE_ERROR, MQTTASYNC_TRACE_SEVERE, MQTTASYNC_TRACE_FATAL, }; /** * This function sets the level of trace information which will be * returned in the trace callback. * @param level the trace level required */ LIBMQTT_API void MQTTAsync_setTraceLevel(enum MQTTASYNC_TRACE_LEVELS level); /** * This is a callback function prototype which must be implemented if you want * to receive trace information. * @param level the trace level of the message returned * @param message the trace message. This is a pointer to a static buffer which * will be overwritten on each call. You must copy the data if you want to keep * it for later. */ typedef void MQTTAsync_traceCallback(enum MQTTASYNC_TRACE_LEVELS level, char* message); /** * This function sets the trace callback if needed. If set to NULL, * no trace information will be returned. The default trace level is * MQTTASYNC_TRACE_MINIMUM. * @param callback a pointer to the function which will handle the trace information */ LIBMQTT_API void MQTTAsync_setTraceCallback(MQTTAsync_traceCallback* callback); /** * This function returns version information about the library. * no trace information will be returned. The default trace level is * MQTTASYNC_TRACE_MINIMUM * @return an array of strings describing the library. The last entry is a NULL pointer. */ LIBMQTT_API MQTTAsync_nameValue* MQTTAsync_getVersionInfo(void); /** * Returns a pointer to a string representation of the error code, or NULL. * Do not free after use. Returns NULL if the error code is unknown. * @param code the MQTTASYNC_ return code. * @return a static string representation of the error code. */ LIBMQTT_API const char* MQTTAsync_strerror(int code); /** * @cond MQTTAsync_main * @page async Threading * The client application runs on several threads. * Processing of handshaking and maintaining * the network connection is performed in the background. * This API is thread safe: functions may be called by multiple application * threads. * Notifications of status and message reception are provided to the client * application using callbacks registered with the library by the call to * MQTTAsync_setCallbacks() (see MQTTAsync_messageArrived(), * MQTTAsync_connectionLost() and MQTTAsync_deliveryComplete()). * In addition, some functions allow success and failure callbacks to be set * for individual requests, in the ::MQTTAsync_responseOptions structure. Applications * can be written as a chain of callback functions. Note that it is a theoretically * possible but unlikely event, that a success or failure callback could be called * before function requesting the callback has returned. In this case the token * delivered in the callback would not yet be known to the application program (see * Race condition for MQTTAsync_token in MQTTAsync.c * https://bugs.eclipse.org/bugs/show_bug.cgi?id=444093) * * @page auto_reconnect Automatic Reconnect * The ability for the client library to reconnect automatically in the event * of a connection failure was added in 1.1. The connection lost callback * allows a flexible response to the loss of a connection, so almost any * behaviour can be implemented in that way. Automatic reconnect does have the * advantage of being a little simpler to use. * * To switch on automatic reconnect, the connect options field * automaticReconnect should be set to non-zero. The minimum and maximum times * before the next connection attempt can also be set, the defaults being 1 and * 60 seconds. At each failure to reconnect, the retry interval is doubled until * the maximum value is reached, and there it stays until the connection is * successfully re-established whereupon it is reset. * * When a reconnection attempt is successful, the ::MQTTAsync_connected callback * function is invoked, if set by calling ::MQTTAsync_setConnected. This allows * the application to take any actions needed, such as amending subscriptions. * * @page offline_publish Publish While Disconnected * This feature was not originally available because with persistence enabled, * messages could be stored locally without ever knowing if they could be sent. * The client application could have created the client with an erroneous broker * address or port for instance. * * To enable messages to be published when the application is disconnected * ::MQTTAsync_createWithOptions must be used instead of ::MQTTAsync_create to * create the client object. The ::createOptions field sendWhileDisconnected * must be set to non-zero, and the maxBufferedMessages field set as required - * the default being 100. * * ::MQTTAsync_getPendingTokens can be called to return the ids of the messages * waiting to be sent, or for which the sending process has not completed. * * @page wildcard Subscription wildcards * Every MQTT message includes a topic that classifies it. MQTT servers use * topics to determine which subscribers should receive messages published to * the server. * * Consider the server receiving messages from several environmental sensors. * Each sensor publishes its measurement data as a message with an associated * topic. Subscribing applications need to know which sensor originally * published each received message. A unique topic is thus used to identify * each sensor and measurement type. Topics such as SENSOR1TEMP, * SENSOR1HUMIDITY, SENSOR2TEMP and so on achieve this but are not very * flexible. If additional sensors are added to the system at a later date, * subscribing applications must be modified to receive them. * * To provide more flexibility, MQTT supports a hierarchical topic namespace. * This allows application designers to organize topics to simplify their * management. Levels in the hierarchy are delimited by the '/' character, * such as SENSOR/1/HUMIDITY. Publishers and subscribers use these * hierarchical topics as already described. * * For subscriptions, two wildcard characters are supported: * * Publishers are not allowed to use the wildcard characters in their topic * names. * * Deciding on your topic hierarchy is an important step in your system design. * * @page qos Quality of service * The MQTT protocol provides three qualities of service for delivering * messages between clients and servers: "at most once", "at least once" and * "exactly once". * * Quality of service (QoS) is an attribute of an individual message being * published. An application sets the QoS for a specific message by setting the * MQTTAsync_message.qos field to the required value. * * A subscribing client can set the maximum quality of service a server uses * to send messages that match the client subscriptions. The * MQTTAsync_subscribe() and MQTTAsync_subscribeMany() functions set this * maximum. The QoS of a message forwarded to a subscriber thus might be * different to the QoS given to the message by the original publisher. * The lower of the two values is used to forward a message. * * The three levels are: * * QoS0, At most once: The message is delivered at most once, or it * may not be delivered at all. Its delivery across the network is not * acknowledged. The message is not stored. The message could be lost if the * client is disconnected, or if the server fails. QoS0 is the fastest mode of * transfer. It is sometimes called "fire and forget". * * The MQTT protocol does not require servers to forward publications at QoS0 * to a client. If the client is disconnected at the time the server receives * the publication, the publication might be discarded, depending on the * server implementation. * * QoS1, At least once: The message is always delivered at least once. * It might be delivered multiple times if there is a failure before an * acknowledgment is received by the sender. The message must be stored * locally at the sender, until the sender receives confirmation that the * message has been published by the receiver. The message is stored in case * the message must be sent again. * * QoS2, Exactly once: The message is always delivered exactly once. * The message must be stored locally at the sender, until the sender receives * confirmation that the message has been published by the receiver. The * message is stored in case the message must be sent again. QoS2 is the * safest, but slowest mode of transfer. A more sophisticated handshaking * and acknowledgement sequence is used than for QoS1 to ensure no duplication * of messages occurs. * @page publish Publication example @code #include #include #include #include "MQTTAsync.h" #if !defined(_WIN32) #include #else #include #endif #if defined(_WRS_KERNEL) #include #endif #define ADDRESS "tcp://mqtt.eclipse.org:1883" #define CLIENTID "ExampleClientPub" #define TOPIC "MQTT Examples" #define PAYLOAD "Hello World!" #define QOS 1 #define TIMEOUT 10000L int finished = 0; void connlost(void *context, char *cause) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; int rc; printf("\nConnection lost\n"); printf(" cause: %s\n", cause); printf("Reconnecting\n"); conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); finished = 1; } } void onDisconnectFailure(void* context, MQTTAsync_failureData* response) { printf("Disconnect failed\n"); finished = 1; } void onDisconnect(void* context, MQTTAsync_successData* response) { printf("Successful disconnection\n"); finished = 1; } void onSendFailure(void* context, MQTTAsync_failureData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_disconnectOptions opts = MQTTAsync_disconnectOptions_initializer; int rc; printf("Message send failed token %d error code %d\n", response->token, response->code); opts.onSuccess = onDisconnect; opts.onFailure = onDisconnectFailure; opts.context = client; if ((rc = MQTTAsync_disconnect(client, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start disconnect, return code %d\n", rc); exit(EXIT_FAILURE); } } void onSend(void* context, MQTTAsync_successData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_disconnectOptions opts = MQTTAsync_disconnectOptions_initializer; int rc; printf("Message with token value %d delivery confirmed\n", response->token); opts.onSuccess = onDisconnect; opts.onFailure = onDisconnectFailure; opts.context = client; if ((rc = MQTTAsync_disconnect(client, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start disconnect, return code %d\n", rc); exit(EXIT_FAILURE); } } void onConnectFailure(void* context, MQTTAsync_failureData* response) { printf("Connect failed, rc %d\n", response ? response->code : 0); finished = 1; } void onConnect(void* context, MQTTAsync_successData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_responseOptions opts = MQTTAsync_responseOptions_initializer; MQTTAsync_message pubmsg = MQTTAsync_message_initializer; int rc; printf("Successful connection\n"); opts.onSuccess = onSend; opts.onFailure = onSendFailure; opts.context = client; pubmsg.payload = PAYLOAD; pubmsg.payloadlen = (int)strlen(PAYLOAD); pubmsg.qos = QOS; pubmsg.retained = 0; if ((rc = MQTTAsync_sendMessage(client, TOPIC, &pubmsg, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start sendMessage, return code %d\n", rc); exit(EXIT_FAILURE); } } int messageArrived(void* context, char* topicName, int topicLen, MQTTAsync_message* m) { // not expecting any messages return 1; } int main(int argc, char* argv[]) { MQTTAsync client; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; int rc; if ((rc = MQTTAsync_create(&client, ADDRESS, CLIENTID, MQTTCLIENT_PERSISTENCE_NONE, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to create client object, return code %d\n", rc); exit(EXIT_FAILURE); } if ((rc = MQTTAsync_setCallbacks(client, NULL, connlost, messageArrived, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to set callback, return code %d\n", rc); exit(EXIT_FAILURE); } conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; conn_opts.onSuccess = onConnect; conn_opts.onFailure = onConnectFailure; conn_opts.context = client; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); exit(EXIT_FAILURE); } printf("Waiting for publication of %s\n" "on topic %s for client with ClientID: %s\n", PAYLOAD, TOPIC, CLIENTID); while (!finished) #if defined(_WIN32) Sleep(100); #else usleep(10000L); #endif MQTTAsync_destroy(&client); return rc; } * @endcode * @page subscribe Subscription example @code #include #include #include #include "MQTTAsync.h" #if !defined(_WIN32) #include #else #include #endif #if defined(_WRS_KERNEL) #include #endif #define ADDRESS "tcp://mqtt.eclipse.org:1883" #define CLIENTID "ExampleClientSub" #define TOPIC "MQTT Examples" #define PAYLOAD "Hello World!" #define QOS 1 #define TIMEOUT 10000L int disc_finished = 0; int subscribed = 0; int finished = 0; void connlost(void *context, char *cause) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; int rc; printf("\nConnection lost\n"); if (cause) printf(" cause: %s\n", cause); printf("Reconnecting\n"); conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); finished = 1; } } int msgarrvd(void *context, char *topicName, int topicLen, MQTTAsync_message *message) { printf("Message arrived\n"); printf(" topic: %s\n", topicName); printf(" message: %.*s\n", message->payloadlen, (char*)message->payload); MQTTAsync_freeMessage(&message); MQTTAsync_free(topicName); return 1; } void onDisconnectFailure(void* context, MQTTAsync_failureData* response) { printf("Disconnect failed, rc %d\n", response->code); disc_finished = 1; } void onDisconnect(void* context, MQTTAsync_successData* response) { printf("Successful disconnection\n"); disc_finished = 1; } void onSubscribe(void* context, MQTTAsync_successData* response) { printf("Subscribe succeeded\n"); subscribed = 1; } void onSubscribeFailure(void* context, MQTTAsync_failureData* response) { printf("Subscribe failed, rc %d\n", response->code); finished = 1; } void onConnectFailure(void* context, MQTTAsync_failureData* response) { printf("Connect failed, rc %d\n", response->code); finished = 1; } void onConnect(void* context, MQTTAsync_successData* response) { MQTTAsync client = (MQTTAsync)context; MQTTAsync_responseOptions opts = MQTTAsync_responseOptions_initializer; int rc; printf("Successful connection\n"); printf("Subscribing to topic %s\nfor client %s using QoS%d\n\n" "Press Q to quit\n\n", TOPIC, CLIENTID, QOS); opts.onSuccess = onSubscribe; opts.onFailure = onSubscribeFailure; opts.context = client; if ((rc = MQTTAsync_subscribe(client, TOPIC, QOS, &opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start subscribe, return code %d\n", rc); finished = 1; } } int main(int argc, char* argv[]) { MQTTAsync client; MQTTAsync_connectOptions conn_opts = MQTTAsync_connectOptions_initializer; MQTTAsync_disconnectOptions disc_opts = MQTTAsync_disconnectOptions_initializer; int rc; int ch; if ((rc = MQTTAsync_create(&client, ADDRESS, CLIENTID, MQTTCLIENT_PERSISTENCE_NONE, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to create client, return code %d\n", rc); rc = EXIT_FAILURE; goto exit; } if ((rc = MQTTAsync_setCallbacks(client, client, connlost, msgarrvd, NULL)) != MQTTASYNC_SUCCESS) { printf("Failed to set callbacks, return code %d\n", rc); rc = EXIT_FAILURE; goto destroy_exit; } conn_opts.keepAliveInterval = 20; conn_opts.cleansession = 1; conn_opts.onSuccess = onConnect; conn_opts.onFailure = onConnectFailure; conn_opts.context = client; if ((rc = MQTTAsync_connect(client, &conn_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start connect, return code %d\n", rc); rc = EXIT_FAILURE; goto destroy_exit; } while (!subscribed && !finished) #if defined(_WIN32) Sleep(100); #else usleep(10000L); #endif if (finished) goto exit; do { ch = getchar(); } while (ch!='Q' && ch != 'q'); disc_opts.onSuccess = onDisconnect; disc_opts.onFailure = onDisconnectFailure; if ((rc = MQTTAsync_disconnect(client, &disc_opts)) != MQTTASYNC_SUCCESS) { printf("Failed to start disconnect, return code %d\n", rc); rc = EXIT_FAILURE; goto destroy_exit; } while (!disc_finished) { #if defined(_WIN32) Sleep(100); #else usleep(10000L); #endif } destroy_exit: MQTTAsync_destroy(&client); exit: return rc; } * @endcode * @page tracing Tracing * * Runtime tracing can be controlled by environment variables or API calls. * * #### Environment variables * * Tracing is switched on by setting the MQTT_C_CLIENT_TRACE environment variable. * A value of ON, or stdout, prints to stdout, any other value is interpreted as a file name to use. * * The amount of trace detail is controlled with the MQTT_C_CLIENT_TRACE_LEVEL environment * variable - valid values are ERROR, PROTOCOL, MINIMUM, MEDIUM and MAXIMUM * (from least to most verbose). * * The variable MQTT_C_CLIENT_TRACE_MAX_LINES limits the number of lines of trace that are output * to a file. Two files are used at most, when they are full, the last one is overwritten with the * new trace entries. The default size is 1000 lines. * * #### Trace API calls * * MQTTAsync_traceCallback() is used to set a callback function which is called whenever trace * information is available. This will be the same information as that printed if the * environment variables were used to control the trace. * * The MQTTAsync_setTraceLevel() calls is used to set the maximum level of trace entries that will be * passed to the callback function. The levels are: * 1. ::MQTTASYNC_TRACE_MAXIMUM * 2. ::MQTTASYNC_TRACE_MEDIUM * 3. ::MQTTASYNC_TRACE_MINIMUM * 4. ::MQTTASYNC_TRACE_PROTOCOL * 5. ::MQTTASYNC_TRACE_ERROR * 6. ::MQTTASYNC_TRACE_SEVERE * 7. ::MQTTASYNC_TRACE_FATAL * * Selecting ::MQTTASYNC_TRACE_MAXIMUM will cause all trace entries at all levels to be returned. * Choosing ::MQTTASYNC_TRACE_ERROR will cause ERROR, SEVERE and FATAL trace entries to be returned * to the callback function. * * ### MQTT Packet Tracing * * A feature that can be very useful is printing the MQTT packets that are sent and received. To * achieve this, use the following environment variable settings: * @code MQTT_C_CLIENT_TRACE=ON MQTT_C_CLIENT_TRACE_LEVEL=PROTOCOL * @endcode * The output you should see looks like this: * @code 20130528 155936.813 3 stdout-subscriber -> CONNECT cleansession: 1 (0) 20130528 155936.813 3 stdout-subscriber <- CONNACK rc: 0 20130528 155936.813 3 stdout-subscriber -> SUBSCRIBE msgid: 1 (0) 20130528 155936.813 3 stdout-subscriber <- SUBACK msgid: 1 20130528 155941.818 3 stdout-subscriber -> DISCONNECT (0) * @endcode * where the fields are: * 1. date * 2. time * 3. socket number * 4. client id * 5. direction (-> from client to server, <- from server to client) * 6. packet details * * ### Default Level Tracing * * This is an extract of a default level trace of a call to connect: * @code 19700101 010000.000 (1152206656) (0)> MQTTClient_connect:893 19700101 010000.000 (1152206656) (1)> MQTTClient_connectURI:716 20130528 160447.479 Connecting to serverURI localhost:1883 20130528 160447.479 (1152206656) (2)> MQTTProtocol_connect:98 20130528 160447.479 (1152206656) (3)> MQTTProtocol_addressPort:48 20130528 160447.479 (1152206656) (3)< MQTTProtocol_addressPort:73 20130528 160447.479 (1152206656) (3)> Socket_new:599 20130528 160447.479 New socket 4 for localhost, port 1883 20130528 160447.479 (1152206656) (4)> Socket_addSocket:163 20130528 160447.479 (1152206656) (5)> Socket_setnonblocking:73 20130528 160447.479 (1152206656) (5)< Socket_setnonblocking:78 (0) 20130528 160447.479 (1152206656) (4)< Socket_addSocket:176 (0) 20130528 160447.479 (1152206656) (4)> Socket_error:95 20130528 160447.479 (1152206656) (4)< Socket_error:104 (115) 20130528 160447.479 Connect pending 20130528 160447.479 (1152206656) (3)< Socket_new:683 (115) 20130528 160447.479 (1152206656) (2)< MQTTProtocol_connect:131 (115) * @endcode * where the fields are: * 1. date * 2. time * 3. thread id * 4. function nesting level * 5. function entry (>) or exit (<) * 6. function name : line of source code file * 7. return value (if there is one) * * ### Memory Allocation Tracing * * Setting the trace level to maximum causes memory allocations and frees to be traced along with * the default trace entries, with messages like the following: * @code 20130528 161819.657 Allocating 16 bytes in heap at file /home/icraggs/workspaces/mqrtc/mqttv3c/src/MQTTPacket.c line 177 ptr 0x179f930 20130528 161819.657 Freeing 16 bytes in heap at file /home/icraggs/workspaces/mqrtc/mqttv3c/src/MQTTPacket.c line 201, heap use now 896 bytes * @endcode * When the last MQTT client object is destroyed, if the trace is being recorded * and all memory allocated by the client library has not been freed, an error message will be * written to the trace. This can help with fixing memory leaks. The message will look like this: * @code 20130528 163909.208 Some memory not freed at shutdown, possible memory leak 20130528 163909.208 Heap scan start, total 880 bytes 20130528 163909.208 Heap element size 32, line 354, file /home/icraggs/workspaces/mqrtc/mqttv3c/src/MQTTPacket.c, ptr 0x260cb00 20130528 163909.208 Content 20130528 163909.209 Heap scan end * @endcode * @endcond */ #ifdef __cplusplus } #endif #endif