Skip to content

R
rt-thread

SummerGao. / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 7cf703dd 编写于 作者: o777788's avatar o777788 提交者： GitHub
浏览文件
操作

Update 1170 gpios (#6298) 

* 增加1170可操作的gpio数

* 修改默认引脚配置

* 增加千兆网络引脚配置
上级 a0c3dc4c
隐藏空白更改
内联 并排
Showing with 194 addition and 157 deletion
bsp/imxrt/imxrt1170-nxp-evk/board/Kconfig
浏览文件 @ 7cf703dd
......@@ -143,7 +143,7 @@ menu "Onboard Peripheral Drivers"
config PHY_RESET_RTL8211F_PORT
int "indicate port of reset"
default 11
default 5
config PHY_RESET_RTL8211F_PIN
int "indicate pin of reset"
......
bsp/imxrt/imxrt1170-nxp-evk/board/board.c
浏览文件 @ 7cf703dd
......@@ -7,6 +7,7 @@
* Date Author Notes
* 2009-01-05 Bernard first implementation
* 2022-08-15 xjy198903 add sdram pin config
* 2022-08-17 xjy198903 add rgmii pins
*/
#include <rthw.h>
......@@ -446,163 +447,194 @@ void imxrt_SDcard_pins_init(void)
#endif
#ifdef BSP_USING_ETH
void imxrt_eth_pins_init(void) {
CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */
CLOCK_EnableClock(kCLOCK_Iomuxc_Lpsr); /* LPCG on: LPCG is ON. */
#ifdef PHY_USING_RTL8211F
CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 is configured as GPIO9_IO11 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_24_LPUART1_TXD, /* GPIO_AD_24 is configured as LPUART1_TXD */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_25_LPUART1_RXD, /* GPIO_AD_25 is configured as LPUART1_RXD */
1U); /* Software Input On Field: Force input path of pad GPIO_AD_25 */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_32_ENET_MDC, /* GPIO_AD_32 is configured as ENET_MDC */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_33_ENET_MDIO, /* GPIO_AD_33 is configured as ENET_MDIO */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 is configured as ENET_TX_DATA00 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 is configured as ENET_TX_DATA01 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 is configured as ENET_TX_EN */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 is configured as ENET_REF_CLK */
1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_05 */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 is configured as ENET_RX_DATA00 */
1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_06 */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 is configured as ENET_RX_DATA01 */
1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_07 */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 is configured as ENET_RX_EN */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 is configured as ENET_RX_ER */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_GPR->GPR4 = ((IOMUXC_GPR->GPR4 &
(~(IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR_MASK))) /* Mask bits to zero which are setting */
| IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR(0x01U) /* ENET_REF_CLK direction control: 0x01U */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN, /* GPIO_DISP_B1_00 is configured as ENET_1G_RX_EN */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK, /* GPIO_DISP_B1_01 is configured as ENET_1G_RX_CLK */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00, /* GPIO_DISP_B1_02 is configured as ENET_1G_RX_DATA00 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01, /* GPIO_DISP_B1_03 is configured as ENET_1G_RX_DATA01 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02, /* GPIO_DISP_B1_04 is configured as ENET_1G_RX_DATA02 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03, /* GPIO_DISP_B1_05 is configured as ENET_1G_RX_DATA03 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03, /* GPIO_DISP_B1_06 is configured as ENET_1G_TX_DATA03 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02, /* GPIO_DISP_B1_07 is configured as ENET_1G_TX_DATA02 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01, /* GPIO_DISP_B1_08 is configured as ENET_1G_TX_DATA01 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00, /* GPIO_DISP_B1_09 is configured as ENET_1G_TX_DATA00 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN, /* GPIO_DISP_B1_10 is configured as ENET_1G_TX_EN */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO, /* GPIO_DISP_B1_11 is configured as ENET_1G_TX_CLK_IO */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13, /* GPIO_DISP_B2_12 is configured as GPIO_MUX5_IO13 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14, /* GPIO_DISP_B2_13 is configured as GPIO_MUX5_IO14 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC, /* GPIO_EMC_B2_19 is configured as ENET_1G_MDC */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO, /* GPIO_EMC_B2_20 is configured as ENET_1G_MDIO */
0U); /* Software Input On Field: Input Path is determined by functionality */
#else
CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */
CLOCK_EnableClock(kCLOCK_Iomuxc_Lpsr); /* LPCG on: LPCG is ON. */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 is configured as GPIO9_IO11 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_32_ENET_MDC, /* GPIO_AD_32 is configured as ENET_MDC */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_33_ENET_MDIO, /* GPIO_AD_33 is configured as ENET_MDIO */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 is configured as ENET_TX_DATA00 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 is configured as ENET_TX_DATA01 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 is configured as ENET_TX_EN */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 is configured as ENET_REF_CLK */
1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_05 */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 is configured as ENET_RX_DATA00 */
1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_06 */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 is configured as ENET_RX_DATA01 */
1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_07 */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 is configured as ENET_RX_EN */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 is configured as ENET_RX_ER */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_GPR->GPR4 = ((IOMUXC_GPR->GPR4 &
(~(IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR_MASK))) /* Mask bits to zero which are setting */
| IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR(0x01U) /* ENET_REF_CLK direction control: 0x01U */
);
IOMUXC_SetPinMux(
IOMUXC_GPIO_LPSR_12_GPIO12_IO12, /* GPIO_LPSR_12 is configured as GPIO12_IO12 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_24_LPUART1_TXD, /* GPIO_AD_24 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_25_LPUART1_RXD, /* GPIO_AD_25 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 PAD functional properties : */
0x02U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 PAD functional properties : */
0x02U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 PAD functional properties : */
0x02U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 PAD functional properties : */
0x03U); /* Slew Rate Field: Fast Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_LPSR_12_GPIO12_IO12, /* GPIO_LPSR_12 PAD functional properties : */
0x0EU); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high driver
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull up
Open Drain LPSR Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinMux(
IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12, /* GPIO_LPSR_12 is configured as GPIO12_IO12 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 PAD functional properties : */
0x02U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 PAD functional properties : */
0x02U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 PAD functional properties : */
0x02U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 PAD functional properties : */
0x03U); /* Slew Rate Field: Fast Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Disable, Highz
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 PAD functional properties : */
0x06U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high drive strength
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull down
Open Drain Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12, /* GPIO_LPSR_12 PAD functional properties : */
0x0EU); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: high driver
Pull / Keep Select Field: Pull Enable
Pull Up / Down Config. Field: Weak pull up
Open Drain LPSR Field: Disabled
Domain write protection: Both cores are allowed
Domain write protection lock: Neither of DWP bits is locked */
#endif
}
#endif
......
bsp/imxrt/libraries/drivers/drv_gpio.c
浏览文件 @ 7cf703dd
......@@ -28,7 +28,12 @@
#endif
#define __IMXRT_HDR_DEFAULT {-1, 0, RT_NULL, RT_NULL}
#define PIN_INVALID_CHECK(PORT_INDEX,PIN_NUM) (PORT_INDEX > 4) || ((mask_tab[PORT_INDEX].valid_mask & (1 << PIN_NUM)) == 0)
#ifdef SOC_IMXRT1170_SERIES
#define PIN_INVALID_CHECK(PORT_INDEX, PIN_NUM) (PORT_INDEX > 7) || ((mask_tab[PORT_INDEX].valid_mask & (1 << PIN_NUM)) == 0)
#else
#define PIN_INVALID_CHECK(PORT_INDEX, PIN_NUM) (PORT_INDEX > 4) || ((mask_tab[PORT_INDEX].valid_mask & (1 << PIN_NUM)) == 0)
#endif
#if defined(SOC_IMXRT1015_SERIES)
#define MUX_BASE 0x401f8024
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或