Skip to content

R
rt-thread

py_free-物联智能 / rt-thread
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 f9e58990 编写于 作者: L liu2guang
浏览文件
操作

[BSP][RT1050] fix rt1050 bsp bug and update code. | 修复RT1050 BSP bug并更新代码. 

修复以下问题:
1.  修复当配置BSP为野火开发板时, 编译无法通过问题.。
2.  修复ft5406驱动挂载i2c总线到i2c1 bus。
3.  修复spibus时钟分频数错误，并修复所有spi bus都关闭时编译警告。

更新代码:
1. 移除rtgui相关初始化代码.。
2. 导出lcd相关配置参数：HSW/HFP/HBP/VSW/VFP/VBP/Backlight pin/Reset pin/width pixel/height pixel。
3. 当配置BSP为野火板子时, 默认添加sdio驱动。
上级 8ea0ea91
隐藏空白更改
内联 并排
Showing with 582 addition and 1129 deletion
bsp/imxrt1052-evk/.config
浏览文件 @ f9e58990
......@@ -317,6 +317,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_SAMPLES is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
#
# example package: hello
......@@ -343,14 +344,14 @@ CONFIG_RT_USING_UART1=y
# CONFIG_RT_USING_UART8 is not set
#
# Select spi bus drivers
# Select spi bus and dev drivers
#
CONFIG_LPSPI_CLK_SOURCE_FROM_PLL3PFD1=y
# CONFIG_LPSPI_CLK_SOURCE_FROM_PLL3PFD0 is not set
# CONFIG_LPSPI_CLK_SOURCE_FROM_PLL2 is not set
# CONFIG_LPSPI_CLK_SOURCE_FROM_PLL2PFD2 is not set
CONFIG_LPSPI_CLK_SOURCE=0
CONFIG_LPSPI_CLK_SOURCE_DIVIDER=7
CONFIG_LPSPI_CLK_SOURCE_DIVIDER=8
# CONFIG_RT_USING_SPIBUS1 is not set
# CONFIG_RT_USING_SPIBUS2 is not set
# CONFIG_RT_USING_SPIBUS3 is not set
......@@ -361,5 +362,35 @@ CONFIG_LPSPI4_SDO_GPIO_1=y
# CONFIG_LPSPI4_SDO_GPIO_2 is not set
CONFIG_LPSPI4_SDI_GPIO_1=y
# CONFIG_LPSPI4_SDI_GPIO_2 is not set
# CONFIG_RT_USING_SPI_FLASH is not set
#
# Select i2c bus drivers
#
CONFIG_LPI2C_CLOCK_SOURCE_DIVIDER=4
CONFIG_RT_USING_I2C1=y
# CONFIG_RT_USING_I2C1_BITOPS is not set
# CONFIG_RT_USING_I2C2 is not set
# CONFIG_RT_USING_I2C3 is not set
# CONFIG_RT_USING_I2C4 is not set
#
# Select lcd driver
#
#
# Notice: Evk Board para: 480*272 4 4 8 2 40 10 106 45
#
CONFIG_RT_USING_LCD=y
CONFIG_LCD_WIDTH=480
CONFIG_LCD_HEIGHT=272
CONFIG_LCD_HFP=4
CONFIG_LCD_VFP=4
CONFIG_LCD_HBP=8
CONFIG_LCD_VBP=2
CONFIG_LCD_HSW=40
CONFIG_LCD_VSW=10
CONFIG_LCD_BL_PIN=106
CONFIG_LCD_RST_PIN=45
CONFIG_RT_USING_SDRAM=y
CONFIG_RT_USING_RTC_HP=y
bsp/imxrt1052-evk/Kconfig
浏览文件 @ f9e58990
......@@ -70,7 +70,7 @@ menu "Select uart drivers"
default n
endmenu
menu "Select spi bus drivers"
menu "Select spi bus and dev drivers"
choice
prompt "SPI bus clock source"
default LPSPI_CLK_SOURCE_FROM_PLL3PFD1
......@@ -94,7 +94,7 @@ menu "Select spi bus drivers"
config LPSPI_CLK_SOURCE_DIVIDER
int "SPI bus clock source divider"
range 1 8
default 7
default 8
config RT_USING_SPIBUS1
bool "Using spi1 bus"
......@@ -223,67 +223,174 @@ menu "Select spi bus drivers"
config LPSPI4_SDI_GPIO_2
bool "GPIO_B1_05"
endchoice
config RT_USING_SPI_FLASH
bool "Using spi flash with sfud"
default n
select RT_USING_SPI
select RT_USING_SFUD
select RT_USING_PIN
choice
prompt "SPI flash using spibus"
default SPI_FLASH_USING_SPIBUS4
depends on RT_USING_SPI_FLASH
config SPI_FLASH_USING_SPIBUS1
bool "spi1"
select RT_USING_SPIBUS1
config SPI_FLASH_USING_SPIBUS2
bool "spi2"
select RT_USING_SPIBUS2
config SPI_FLASH_USING_SPIBUS3
bool "spi3"
select RT_USING_SPIBUS3
config SPI_FLASH_USING_SPIBUS4
bool "spi4"
select RT_USING_SPIBUS4
endchoice
config SPI_FLASH_USING_SPIBUS_NAME
string
default "spi1" if SPI_FLASH_USING_SPIBUS1
default "spi2" if SPI_FLASH_USING_SPIBUS2
default "spi3" if SPI_FLASH_USING_SPIBUS3
default "spi4" if SPI_FLASH_USING_SPIBUS4
config SPI_FLASH_NAME
string "SPI flash device name"
default "flash0"
depends on RT_USING_SPI_FLASH
config SPI_FLASH_USING_CS_PIN
int "SPI flash cs pin index"
default 79
range 1 127
depends on RT_USING_SPI_FLASH
endmenu
menu "Select iic drivers"
menu "Select i2c bus drivers"
config LPI2C_CLOCK_SOURCE_DIVIDER
int "lpi2c bus clock source divider"
range 1 64
default 4
config RT_USING_I2C1
bool "USING I2C1"
select RT_USING_I2C
default y
if RT_USING_I2C1
config RT_USING_I2C1_BITOPS
select RT_USING_I2C_BITOPS
default n
if RT_USING_I2C1
config RT_USING_I2C1_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C1"
endif
endif
config RT_USING_I2C2
bool "USING I2C2"
select RT_USING_I2C
default n
if RT_USING_I2C2
config RT_USING_I2C2_BITOPS
select RT_USING_I2C_BITOPS
default n
if RT_USING_I2C2
config RT_USING_I2C2_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C2"
endif
endif
config RT_USING_I2C3
bool "USING I2C3"
select RT_USING_I2C
default n
if RT_USING_I2C3
config RT_USING_I2C3_BITOPS
select RT_USING_I2C_BITOPS
default n
if RT_USING_I2C3
config RT_USING_I2C3_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C3"
endif
endif
config RT_USING_I2C4
bool "USING I2C4"
select RT_USING_I2C
default n
if RT_USING_I2C4
config RT_USING_I2C4_BITOPS
select RT_USING_I2C_BITOPS
default n
if RT_USING_I2C4
config RT_USING_I2C4_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C4"
endif
endif
endmenu
menu "Select lcd driver"
if RT_USING_LCD && BOARD_RT1050_EVK
comment "Notice: Evk Board para: 480*272 4 4 8 2 40 10 106 45"
endif
if RT_USING_LCD && BOARD_RT1050_FIRE
comment "Notice: Fire Board para: 800*480 4 4 8 2 40 10 58 45"
endif
config RT_USING_LCD
bool "Using lcd"
default n
config LCD_WIDTH
int "Width pixel num"
default 480 if BOARD_RT1050_EVK
default 800 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_HEIGHT
int "Height pixel num"
default 272 if BOARD_RT1050_EVK
default 480 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_HFP
int "HFP"
default 4 if BOARD_RT1050_EVK
default 4 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_VFP
int "VFP"
default 4 if BOARD_RT1050_EVK
default 4 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_HBP
int "HBP"
default 8 if BOARD_RT1050_EVK
default 8 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_VBP
int "VBP"
default 2 if BOARD_RT1050_EVK
default 2 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_HSW
int "HSW"
default 40 if BOARD_RT1050_EVK
default 40 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_VSW
int "VSW"
default 10 if BOARD_RT1050_EVK
default 10 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_BL_PIN
int "Backlight pin index"
default 106 if BOARD_RT1050_EVK
default 58 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
config LCD_RST_PIN
int "Reset pin index"
default 45 if BOARD_RT1050_EVK
default 45 if BOARD_RT1050_FIRE
depends on RT_USING_LCD
endmenu
#menu "SDRAM driver support"
#menu "Select SDRAM driver"
config RT_USING_SDRAM
bool "Using sdram"
default y
#endmenu
#menu "RTC driver support"
#menu "Select RTC driver"
config RT_USING_RTC_HP
bool "Using hp rtc"
select RT_USING_RTC
......
bsp/imxrt1052-evk/Libraries/SConscript
浏览文件 @ f9e58990
......@@ -5,7 +5,11 @@ Import('RTT_ROOT')
from building import *
cwd = GetCurrentDir()
src = Glob('drivers/*.c')
src = Glob('drivers/*.c')
if GetDepend('BOARD_RT1050_FIRE'):
SrcRemove(src, r'drivers\fsl_enet.c')
SrcRemove(src, 'drivers/dataqueue.c')
src += Glob('common/chip/*.c')
src += [cwd + '/system_MIMXRT1052.c']
......
bsp/imxrt1052-evk/drivers/SConscript
浏览文件 @ f9e58990
......@@ -2,7 +2,7 @@ Import('RTT_ROOT')
Import('rtconfig')
from building import *
cwd = os.path.join(str(Dir('#')), 'drivers')
cwd = os.path.join(str(Dir('#')), 'drivers')
# add the general drivers.
src = Split("""
......@@ -16,7 +16,7 @@ CPPDEFINES = []
# add sdram driver code
if GetDepend('RT_USING_SDRAM'):
src = src + ['./drv_sdram.c']
src = src + ['drv_sdram.c']
# add pin driver code
if GetDepend('RT_USING_PIN'):
......@@ -24,25 +24,34 @@ if GetDepend('RT_USING_PIN'):
# add rtc driver code
if GetDepend('RT_USING_RTC_HP'):
src = src + ['./drv_rtc.c']
src = src + ['drv_rtc.c']
# add spibus driver code
if GetDepend('RT_USING_SPI'):
src += ['drv_spi_bus.c']
# add spi flash driver code
if GetDepend('RT_USING_SPI_FLASH'):
src += ['drv_spi_flash.c']
# add i2cbus driver code
if GetDepend('RT_USING_I2C'):
src += ['drv_i2c.c']
# add lcd driver code
if GetDepend('RT_USING_LCD'):
src += ['drv_lcd.c']
# add sdio driver code
if GetDepend('RT_USING_SDIO'):
src += ['drv_sdio.c']
if GetDepend('BOARD_RT1050_EVK'):
src += ['hyper_flash_boot.c']
if GetDepend('RT_USING_LWIP'):
src += ['drv_eth.c', 'fsl_phy.c']
CPPDEFINES += ['FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE']
if GetDepend('RT_USING_SDIO'):
src += ['drv_sdio.c']
if GetDepend('RT_USING_USB_DEVICE'):
src += Glob('usb/phy/*.c')
......@@ -52,9 +61,6 @@ if GetDepend('BOARD_RT1050_EVK'):
src += ['drv_usbd.c']
src += Glob('usb/device/*.c')
if GetDepend('RT_USING_RTGUI') or GetDepend('PKG_USING_GUIENGINE'):
src += ['drv_lcd.c', 'drv_ft5406.c', 'drv_i2c.c']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
Return('group')
bsp/imxrt1052-evk/drivers/board.c
浏览文件 @ f9e58990
......@@ -202,24 +202,4 @@ void rt_hw_board_init()
#endif
}
#ifdef PKG_USING_GUIENGINE
#include <rtgui/driver.h>
#include "drv_lcd.h"
/* initialize for gui driver */
int rtgui_lcd_init(void)
{
rt_device_t device;
imxrt_hw_lcd_init();
device = rt_device_find("lcd");
/* set graphic device */
rtgui_graphic_set_device(device);
return 0;
}
INIT_DEVICE_EXPORT(rtgui_lcd_init);
#endif
/*@}*/
bsp/imxrt1052-evk/drivers/drv_ft5406.c
浏览文件 @ f9e58990
......@@ -40,7 +40,7 @@
#define BSP_TOUCH_SAMPLE_HZ 30
#define I2CBUS_NAME "i2c0"
#define I2CBUS_NAME "i2c1"
#if 0
#define FTDEBUG rt_kprintf
......
bsp/imxrt1052-evk/drivers/drv_lcd.c
浏览文件 @ f9e58990
/*
* File : usart.c
* File : drv_lcd.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
......@@ -10,510 +10,164 @@
* Change Logs:
* Date Author Notes
* 2017-10-30 Tanek the first version
* 2018-04-05 Liu2guang export LCD config parameters.
*/
#include <board.h>
#include <rtthread.h>
#include "drv_lcd.h"
#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_elcdif.h"
#include "fsl_gpio.h"
//#define LCD_DEBUG
#ifdef PKG_USING_GUIENGINE
#define APP_HSW 41
#define APP_HFP 4
#define APP_HBP 8
#define APP_VSW 10
#define APP_VFP 4
#define APP_VBP 2
#define APP_POL_FLAGS \
(kELCDIF_DataEnableActiveHigh | kELCDIF_VsyncActiveLow | kELCDIF_HsyncActiveLow | kELCDIF_DriveDataOnRisingClkEdge)
#define FRAME_BUFFER_ALIGN 64
#define LCD_PIXEL_T uint16_t
#define LCD_BITS_PER_PIXEL (sizeof(LCD_PIXEL_T) * 8)
#define LCD_INIT_DATA (0x00)
/* Display. */
#define LCD_DISP_GPIO GPIO1
#define LCD_DISP_GPIO_PIN 2
/* Back light. */
#define LCD_BL_GPIO GPIO2
#define LCD_BL_GPIO_PIN 31
#define APP_ELCDIF LCDIF
#define APP_LCDIF_DATA_BUS kELCDIF_DataBus16Bit
#define FRAME_BUFFER_COUNT 2
#define RT_HW_LCD_WIDTH ((uint16_t)800) /* LCD PIXEL WIDTH */
#define RT_HW_LCD_HEIGHT ((uint16_t)480) /* LCD PIXEL HEIGHT */
ALIGN(FRAME_BUFFER_ALIGN)
static LCD_PIXEL_T lcdif_frame_buffer[FRAME_BUFFER_COUNT][RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH] SECTION("NonCacheable");
#ifdef LCD_DEBUG
static volatile bool s_frameDone = false;
#if !defined(LCD_WIDTH) || !defined(LCD_HEIGHT)
#error "Please config lcd pixel parameters."
#endif
struct imxrt_lcd_t
{
struct rt_device_graphic_info lcd_info;
struct rt_device lcd;
struct rt_semaphore lcd_sem;
rt_uint32_t index; //lcd buffer
LCD_PIXEL_T * framebuffer;
bool update;
};
static struct imxrt_lcd_t imxrt_lcd;
static void _lcd_gpio_config(void)
{
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 is configured as GPIO1_IO02 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 is configured as LCD_CLK */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 is configured as LCD_ENABLE */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 is configured as LCD_HSYNC */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 is configured as LCD_VSYNC */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 is configured as LCD_DATA00 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 is configured as LCD_DATA01 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 is configured as LCD_DATA02 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 is configured as LCD_DATA03 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 is configured as LCD_DATA04 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 is configured as LCD_DATA05 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 is configured as LCD_DATA06 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 is configured as LCD_DATA07 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 is configured as LCD_DATA08 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 is configured as LCD_DATA09 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 is configured as LCD_DATA10 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 is configured as LCD_DATA11 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 is configured as LCD_DATA12 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 is configured as LCD_DATA13 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 is configured as LCD_DATA14 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 is configured as LCD_DATA15 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 is configured as GPIO2_IO31 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 PAD functional properties : */
0x10B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 PAD functional properties : */
0x10B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
}
static void _lcd_clock_config(void)
{
/*
* The desired output frame rate is 60Hz. So the pixel clock frequency is:
* (480 + 41 + 4 + 18) * (272 + 10 + 4 + 2) * 60 = 9.2M.
* Here set the LCDIF pixel clock to 9.3M.
*/
/*
* Initialize the Video PLL.
* Video PLL output clock is OSC24M * (loopDivider + (denominator / numerator)) / postDivider = 93MHz.
*/
clock_video_pll_config_t config = {
.loopDivider = 31, .postDivider = 8, .numerator = 0, .denominator = 0,
};
CLOCK_InitVideoPll(&config);
/*
* 000 derive clock from PLL2
* 001 derive clock from PLL3 PFD3
* 010 derive clock from PLL5
* 011 derive clock from PLL2 PFD0
* 100 derive clock from PLL2 PFD1
* 101 derive clock from PLL3 PFD1
*/
CLOCK_SetMux(kCLOCK_Lcdif1PreMux, 2);
CLOCK_SetDiv(kCLOCK_Lcdif1PreDiv, 4);
CLOCK_SetDiv(kCLOCK_Lcdif1Div, 1);
/*
* 000 derive clock from divided pre-muxed lcdif1 clock
* 001 derive clock from ipp_di0_clk
* 010 derive clock from ipp_di1_clk
* 011 derive clock from ldb_di0_clk
* 100 derive clock from ldb_di1_clk
*/
CLOCK_SetMux(kCLOCK_Lcdif1Mux, 0);
}
/* Initialize the LCD_DISP. */
static void _lcd_hardware_reset(void)
{
volatile uint32_t i = 0x100U;
gpio_pin_config_t config = {
kGPIO_DigitalOutput, 0,
};
/* Reset the LCD. */
GPIO_PinInit(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, &config);
GPIO_PinWrite(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, 0);
while (i--)
{
}
GPIO_PinWrite(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, 1);
/* Backlight. */
config.outputLogic = 1;
GPIO_PinInit(LCD_BL_GPIO, LCD_BL_GPIO_PIN, &config);
}
static void _lcdif_init(void)
{
const elcdif_rgb_mode_config_t config = {
.panelWidth = RT_HW_LCD_WIDTH,
.panelHeight = RT_HW_LCD_HEIGHT,
.hsw = APP_HSW,
.hfp = APP_HFP,
.hbp = APP_HBP,
.vsw = APP_VSW,
.vfp = APP_VFP,
.vbp = APP_VBP,
.polarityFlags = APP_POL_FLAGS,
.bufferAddr = (uint32_t)lcdif_frame_buffer[0],
.pixelFormat = kELCDIF_PixelFormatRGB565,
.dataBus = APP_LCDIF_DATA_BUS,
};
#if !defined(LCD_HFP) || !defined(LCD_HBP) || !defined(LCD_HSW) || \
!defined(LCD_VFP) || !defined(LCD_VBP) || !defined(LCD_VSW)
#error "Please config lcd timing parameters."
#endif
ELCDIF_RgbModeInit(LCDIF, &config);
}
#if !defined(LCD_BL_PIN) || !defined(LCD_RST_PIN)
#error "Please config lcd backlight or reset pin."
#endif
static void _lcd_interrupt_init(void)
struct rt1050_lcd
{
EnableIRQ(LCDIF_IRQn);
ELCDIF_EnableInterrupts(LCDIF, kELCDIF_CurFrameDoneInterruptEnable);
}
struct rt_device device;
struct rt_device_graphic_info info;
};
static void _lcd_start(void)
{
ELCDIF_RgbModeStart(LCDIF);
}
static struct rt1050_lcd lcd;
ALIGN(64) static uint16_t frame_buffer[LCD_HEIGHT][LCD_WIDTH] SECTION("NonCacheable");
void LCDIF_IRQHandler(void)
static rt_err_t rt1050_lcd_init(rt_device_t device)
{
uint32_t intStatus;
intStatus = ELCDIF_GetInterruptStatus(LCDIF);
ELCDIF_ClearInterruptStatus(LCDIF, intStatus);
if (intStatus & kELCDIF_CurFrameDone)
{
#ifdef LCD_DEBUG
s_frameDone = true;
#endif
RT_ASSERT(device != RT_NULL);
rt_memset(frame_buffer, 0x00, sizeof(frame_buffer));
if (imxrt_lcd.update)
{
ELCDIF_SetNextBufferAddr(LCDIF, (uint32_t)lcdif_frame_buffer[imxrt_lcd.index]);
imxrt_lcd.update = false;
rt_sem_release(&imxrt_lcd.lcd_sem);
}
/* CLK */
clock_video_pll_config_t pll_config;
pll_config.loopDivider = 43;
pll_config.postDivider = 4;
pll_config.numerator = 0;
pll_config.denominator = 0;
CLOCK_InitVideoPll(&pll_config);
}
CLOCK_SetMux(kCLOCK_Lcdif1PreMux, 2);
CLOCK_SetDiv(kCLOCK_Lcdif1PreDiv, 4);
CLOCK_SetMux(kCLOCK_Lcdif1Mux, 0);
CLOCK_SetDiv(kCLOCK_Lcdif1Div, 1);
/* GPIO */
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U); /* LCD_B3 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U); /* LCD_B4 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U); /* LCD_B5 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U); /* LCD_B6 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U); /* LCD_B7 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U); /* LCD_G2 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U); /* LCD_G3 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U); /* LCD_G4 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U); /* LCD_G5 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U); /* LCD_G6 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U); /* LCD_G7 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U); /* LCD_R3 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U); /* LCD_R4 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U); /* LCD_R5 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U); /* LCD_R6 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U); /* LCD_R7 */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0u); /* LCD_CLK */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0u); /* LCD_HSYNC */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0u); /* LCD_VSYNC */
IOMUXC_SetPinMux (IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0u); /* LCD_ENABLE */
rt_pin_mode(LCD_RST_PIN, PIN_MODE_OUTPUT); /* LCD_RESET */
rt_pin_write(LCD_RST_PIN, PIN_LOW);
rt_thread_delay(RT_TICK_PER_SECOND/100);
rt_pin_write(LCD_RST_PIN, PIN_HIGH);
rt_pin_mode (LCD_BL_PIN, PIN_MODE_OUTPUT); /* LCD_BL */
rt_pin_write(LCD_BL_PIN, PIN_HIGH);
/* LCD */
elcdif_rgb_mode_config_t lcd_config;
lcd_config.hfp = LCD_HFP;
lcd_config.vfp = LCD_VFP;
lcd_config.hbp = LCD_HBP;
lcd_config.vbp = LCD_VBP;
lcd_config.hsw = LCD_HSW;
lcd_config.vsw = LCD_VSW;
lcd_config.polarityFlags = kELCDIF_DataEnableActiveHigh |
kELCDIF_VsyncActiveHigh |
kELCDIF_HsyncActiveLow |
kELCDIF_DriveDataOnRisingClkEdge;
lcd_config.panelWidth = LCD_WIDTH;
lcd_config.panelHeight = LCD_HEIGHT;
lcd_config.pixelFormat = kELCDIF_PixelFormatRGB565;
lcd_config.dataBus = kELCDIF_DataBus16Bit;
lcd_config.bufferAddr = (uint32_t)frame_buffer;
ELCDIF_RgbModeInit (LCDIF, &lcd_config);
ELCDIF_RgbModeStart(LCDIF);
/* LCD DEVICE */
lcd.info.width = LCD_WIDTH;
lcd.info.height = LCD_HEIGHT;
lcd.info.pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565;
lcd.info.bits_per_pixel = 16;
lcd.info.framebuffer = (void *)frame_buffer;
return RT_EOK;
}
static rt_err_t rt_lcd_control(rt_device_t dev, int cmd, void *args)
static rt_err_t rt1050_lcd_control(rt_device_t device, int cmd, void *args)
{
switch (cmd)
switch(cmd)
{
case RTGRAPHIC_CTRL_RECT_UPDATE:
{
if(rt_sem_take(&imxrt_lcd.lcd_sem, RT_TICK_PER_SECOND/20) != RT_EOK)
{
rt_kprintf("lcdtimeout!\n");
}
imxrt_lcd.index = (imxrt_lcd.index + 1) % FRAME_BUFFER_COUNT;
memcpy(lcdif_frame_buffer[imxrt_lcd.index], imxrt_lcd.framebuffer,
sizeof(LCD_PIXEL_T) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT);
imxrt_lcd.update = true;
}
break;
case RTGRAPHIC_CTRL_RECT_UPDATE:
break;
case RTGRAPHIC_CTRL_POWERON:
case RTGRAPHIC_CTRL_POWERON:
rt_pin_write(LCD_BL_PIN, PIN_HIGH);
break;
case RTGRAPHIC_CTRL_POWEROFF:
case RTGRAPHIC_CTRL_POWEROFF:
rt_pin_write(LCD_BL_PIN, PIN_LOW);
break;
case RTGRAPHIC_CTRL_GET_INFO:
memcpy(args, &imxrt_lcd.lcd_info, sizeof(imxrt_lcd.lcd_info));
rt_memcpy(args, &lcd.info, sizeof(lcd.info));
break;
case RTGRAPHIC_CTRL_SET_MODE:
......@@ -523,166 +177,22 @@ static rt_err_t rt_lcd_control(rt_device_t dev, int cmd, void *args)
return RT_EOK;
}
int imxrt_hw_lcd_init(void)
int rt_hw_lcd_init(void)
{
LCD_PIXEL_T * framebuffer;
framebuffer = rt_malloc_align(sizeof(LCD_PIXEL_T) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT, FRAME_BUFFER_ALIGN);
if(!framebuffer)
{
rt_kprintf("malloc framebuffer fail\n");
return -1;
}
imxrt_lcd.framebuffer = framebuffer;
memset(framebuffer, LCD_INIT_DATA, sizeof(LCD_PIXEL_T) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT);
memset(lcdif_frame_buffer, LCD_INIT_DATA, sizeof(lcdif_frame_buffer));
rt_kprintf("framebuffer: %p, lcdif_frame_buffer: %p, lcdif_frame_buffer[0]: %p, lcdif_frame_buffer[1]: %p\n", \
framebuffer, lcdif_frame_buffer, lcdif_frame_buffer[0], lcdif_frame_buffer[1]);
_lcd_gpio_config();
_lcd_clock_config();
_lcd_hardware_reset();
_lcdif_init();
_lcd_interrupt_init();
_lcd_start();
imxrt_lcd.index = 0;
imxrt_lcd.update = false;
imxrt_lcd.lcd_info.bits_per_pixel = LCD_BITS_PER_PIXEL;
imxrt_lcd.lcd_info.pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565;
imxrt_lcd.lcd_info.framebuffer = (void *)framebuffer;
imxrt_lcd.lcd_info.width = RT_HW_LCD_WIDTH;
imxrt_lcd.lcd_info.height = RT_HW_LCD_HEIGHT;
rt_err_t ret;
lcd.device.type = RT_Device_Class_Graphic;
lcd.device.init = rt1050_lcd_init;
lcd.device.open = RT_NULL;
lcd.device.close = RT_NULL;
lcd.device.read = RT_NULL;
lcd.device.write = RT_NULL;
lcd.device.control = rt1050_lcd_control;
imxrt_lcd.lcd.type = RT_Device_Class_Graphic;
imxrt_lcd.lcd.init = NULL;
imxrt_lcd.lcd.open = NULL;
imxrt_lcd.lcd.close = NULL;
imxrt_lcd.lcd.read = NULL;
imxrt_lcd.lcd.write = NULL;
imxrt_lcd.lcd.control = rt_lcd_control;
imxrt_lcd.lcd.user_data = (void *)&imxrt_lcd.lcd_info;
lcd.device.user_data = (void *)&lcd.info;
rt_sem_init(&imxrt_lcd.lcd_sem, "lcd_sem", 1, RT_IPC_FLAG_FIFO);
/* register lcd device to RT-Thread */
rt_device_register(&imxrt_lcd.lcd, "lcd", RT_DEVICE_FLAG_RDWR);
return 0;
}
//INIT_DEVICE_EXPORT(imxrt_hw_lcd_init);
#ifdef LCD_DEBUG
#include <finsh.h>
void APP_FillFrameBuffer(uint32_t frameBuffer[RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH])
{
/* Background color. */
static const uint32_t bgColor = 0U;
/* Foreground color. */
static uint8_t fgColorIndex = 0U;
static const uint32_t fgColorTable[] = {0x000000FFU, 0x0000FF00U, 0x0000FFFFU, 0x00FF0000U,
0x00FF00FFU, 0x00FFFF00U, 0x00FFFFFFU};
uint32_t fgColor = fgColorTable[fgColorIndex];
/* Position of the foreground rectangle. */
static uint16_t upperLeftX = 0U;
static uint16_t upperLeftY = 0U;
static uint16_t lowerRightX = (RT_HW_LCD_WIDTH - 1U) / 2U;
static uint16_t lowerRightY = (RT_HW_LCD_HEIGHT - 1U) / 2U;
static int8_t incX = 1;
static int8_t incY = 1;
/* Change color in next forame or not. */
static bool changeColor = false;
uint32_t i, j;
/* Background color. */
for (i = 0; i < RT_HW_LCD_HEIGHT; i++)
{
for (j = 0; j < RT_HW_LCD_WIDTH; j++)
{
frameBuffer[i][j] = bgColor;
}
}
/* Foreground color. */
for (i = upperLeftY; i < lowerRightY; i++)
{
for (j = upperLeftX; j < lowerRightX; j++)
{
frameBuffer[i][j] = fgColor;
}
}
/* Update the format: color and rectangle position. */
upperLeftX += incX;
upperLeftY += incY;
lowerRightX += incX;
lowerRightY += incY;
changeColor = false;
if (0U == upperLeftX)
{
incX = 1;
changeColor = true;
}
else if (RT_HW_LCD_WIDTH - 1 == lowerRightX)
{
incX = -1;
changeColor = true;
}
if (0U == upperLeftY)
{
incY = 1;
changeColor = true;
}
else if (RT_HW_LCD_HEIGHT - 1 == lowerRightY)
{
incY = -1;
changeColor = true;
}
if (changeColor)
{
fgColorIndex++;
if (ARRAY_SIZE(fgColorTable) == fgColorIndex)
{
fgColorIndex = 0U;
}
}
}
void lcd_test(void)
{
uint32_t frameBufferIndex = 0;
ret = rt_device_register(&lcd.device, "lcd", RT_DEVICE_FLAG_RDWR);
APP_FillFrameBuffer(lcdif_frame_buffer[frameBufferIndex]);
while (1)
{
frameBufferIndex ^= 1U;
APP_FillFrameBuffer(lcdif_frame_buffer[frameBufferIndex]);
ELCDIF_SetNextBufferAddr(LCDIF, (uint32_t)lcdif_frame_buffer[frameBufferIndex]);
s_frameDone = false;
/* Wait for previous frame complete. */
while (!s_frameDone)
{
}
}
return ret;
}
FINSH_FUNCTION_EXPORT(lcd_test, lcd test);
#endif
#endif
INIT_DEVICE_EXPORT(rt_hw_lcd_init);
bsp/imxrt1052-evk/drivers/drv_lcd.h
浏览文件 @ f9e58990
/*
* File : drv_i2c.c
* COPYRIGHT (C) 2006 - 2017, RT-Thread Development Team
* File : drv_lcd2.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2017-12-15 Tanek the first version
* 2018-04-05 Liuguang the first version.
*/
#ifndef __DRV_LCD_H__
#define __DRV_LCD_H__
extern int imxrt_hw_lcd_init(void);
#include <rtthread.h>
#include <rtdevice.h>
int rt_hw_lcd_init(void);
#endif
bsp/imxrt1052-evk/drivers/drv_spi_bus.c
浏览文件 @ f9e58990
......@@ -18,7 +18,8 @@
#include "fsl_iomuxc.h"
#include "fsl_lpspi.h"
#ifdef RT_USING_SPI
#if defined(RT_USING_SPIBUS1) || defined(RT_USING_SPIBUS2) || \
defined(RT_USING_SPIBUS3) || defined(RT_USING_SPIBUS4)
#if defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL
#error "Please don't define 'FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL'!"
......@@ -28,7 +29,7 @@
#define LPSPI_CLK_SOURCE (1U) /* PLL3 PFD0 */
#endif
#if !defined(LPSPI_CLK_SOURCE_DIVIDER)
#define LPSPI_CLK_SOURCE_DIVIDER (7U) /* 8div */
#define LPSPI_CLK_SOURCE_DIVIDER (8U) /* 8div */
#endif
/* LPSPI1 SCK SDO SDI IOMUX Config */
......@@ -399,14 +400,10 @@ static struct rt_spi_ops rt1050_spi_ops =
int rt_hw_spi_bus_init(void)
{
#if defined(RT_USING_SPIBUS1) || defined(RT_USING_SPIBUS2) || \
defined(RT_USING_SPIBUS3) || defined(RT_USING_SPIBUS4)
CLOCK_SetMux(kCLOCK_LpspiMux, LPSPI_CLK_SOURCE);
CLOCK_SetDiv(kCLOCK_LpspiDiv, LPSPI_CLK_SOURCE_DIVIDER);
CLOCK_SetDiv(kCLOCK_LpspiDiv, LPSPI_CLK_SOURCE_DIVIDER-1);
CLOCK_EnableClock(kCLOCK_Iomuxc);
#endif
#if defined(RT_USING_SPIBUS1)
rt_spi_bus_register(&spi1_bus, "spi1", &rt1050_spi_ops);
......
bsp/imxrt1052-evk/drivers/drv_spi_flash.c 0 → 100644
浏览文件 @ f9e58990
/*
* File : drv_spi_flash.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2018-04-02 Liuguang the first version.
*/
#include "drv_spi_flash.h"
#include "spi_flash.h"
#include "spi_flash_sfud.h"
#ifndef SPI_FLASH_USING_SPIBUS_NAME
#define SPI_FLASH_USING_SPIBUS_NAME "spi4"
#endif
#ifndef SPI_FLASH_NAME
#define SPI_FLASH_NAME "flash0"
#endif
#ifndef SPI_FLASH_USING_CS_PIN
#define SPI_FLASH_USING_CS_PIN (79)
#endif
int rt_hw_spi_flash_init(void)
{
rt_err_t ret;
extern rt_err_t rt1050_spi_bus_attach_device(const char *bus_name,
const char *device_name, rt_uint32_t pin);
ret = rt1050_spi_bus_attach_device(SPI_FLASH_USING_SPIBUS_NAME,
SPI_FLASH_USING_SPIBUS_NAME "0", SPI_FLASH_USING_CS_PIN);
if(ret != RT_EOK)
{
return ret;
}
if(rt_sfud_flash_probe(SPI_FLASH_NAME, SPI_FLASH_USING_SPIBUS_NAME "0") == RT_NULL)
{
return RT_ERROR;
}
return RT_EOK;
}
INIT_DEVICE_EXPORT(rt_hw_spi_flash_init);
bsp/imxrt1052-evk/drivers/drv_spi_flash.h 0 → 100644
浏览文件 @ f9e58990
/*
* File : drv_spi_flash.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2018-04-02 Liuguang the first version.
*/
#ifndef __DRV_SPI_FLASH_H_
#define __DRV_SPI_FLASH_H_
#include <rtthread.h>
#include <rtdevice.h>
int rt_hw_spi_flash_init(void);
#endif /* __DRV_SPI_FLASH_H_ */
bsp/imxrt1052-evk/project.uvprojx
浏览文件 @ f9e58990
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
<SchemaVersion>2.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>RT-Thread IMXRT1052</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<pCCUsed>5060528::V5.06 update 5 (build 528)::ARMCC</pCCUsed>
<uAC6>0</uAC6>
<pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
<TargetOption>
<TargetCommonOption>
<Device>MIMXRT1052:M7</Device>
<Vendor>NXP</Vendor>
<PackID>NXP.iMXRT_DFP.1.0.2</PackID>
<PackURL>http://mcuxpresso.nxp.com/cmsis_pack/repo/</PackURL>
<PackID>NXP.iMXRT_DFP.1.0.1</PackID>
<Cpu>IRAM(0x20000000,0x00060000) IRAM2(0x00000000,0x00020000) CPUTYPE("Cortex-M7") FPU3(SFPU) CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec />
<StartupFile />
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0RT1050 -FS060000000 -FL04000000 -FP0($$Device:MIMXRT1052$Flash\RT1050.FLM))</FlashDriverDll>
<DeviceId>0</DeviceId>
<RegisterFile>$$Device:MIMXRT1052$Device\Include\MIMXRT1052.h</RegisterFile>
<MemoryEnv />
<Cmp />
<Asm />
<Linker />
<OHString />
<InfinionOptionDll />
<SLE66CMisc />
<SLE66AMisc />
<SLE66LinkerMisc />
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>$$Device:MIMXRT1052$SVD\MIMXRT1052.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath />
<IncludePath />
<LibPath />
<RegisterFilePath />
<DBRegisterFilePath />
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
......@@ -59,8 +60,8 @@
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name />
<UserProg2Name />
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
......@@ -69,8 +70,8 @@
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name />
<UserProg2Name />
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
......@@ -80,14 +81,14 @@
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rtthread-mdk.bin</UserProg1Name>
<UserProg2Name />
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString />
<SVCSIdString></SVCSIdString>
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
......@@ -101,8 +102,8 @@
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument />
<IncludeLibraryModules />
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<DllOption>
......@@ -135,11 +136,11 @@
</Flash1>
<bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3 />
<Flash4 />
<pFcarmOut />
<pFcarmGrp />
<pFcArmRoot />
<Flash3></Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
......@@ -172,7 +173,7 @@
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M7"</AdsCpuType>
<RvctDeviceName />
<RvctDeviceName></RvctDeviceName>
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
......@@ -304,7 +305,7 @@
<Size>0x20000</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector />
<RvctStartVector></RvctStartVector>
</ArmAdsMisc>
<Cads>
<interw>1</interw>
......@@ -332,7 +333,7 @@
<VariousControls>
<MiscControls>--library_interface=armcc --library_type=standardlib --diag_suppress=66,1296,186</MiscControls>
<Define>SKIP_SYSCLK_INIT, CPU_MIMXRT1052DVL6A, FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1, EVK_MCIMXRM, FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE, RT_USING_ARM_LIBC</Define>
<Undefine />
<Undefine></Undefine>
<IncludePath>applications;.;drivers;Libraries;Libraries\drivers;Libraries\utilities;Libraries\CMSIS\Include;..\..\include;..\..\libcpu\arm\cortex-m7;..\..\libcpu\arm\common;..\..\components\dfs\include;..\..\components\dfs\filesystems\devfs;..\..\components\dfs\filesystems\elmfat;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\spi;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\finsh;..\..\components\libc\compilers\armlibc;..\..\components\net\lwip-2.0.2\src;..\..\components\net\lwip-2.0.2\src\include;..\..\components\net\lwip-2.0.2\src\include\ipv4;..\..\components\net\lwip-2.0.2\src\arch\include;..\..\components\net\lwip-2.0.2\src\include\netif;..\..\components\net\lwip-2.0.2\src\include\posix</IncludePath>
</VariousControls>
</Cads>
......@@ -348,10 +349,10 @@
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<VariousControls>
<MiscControls />
<Define />
<Undefine />
<IncludePath />
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
......@@ -363,13 +364,13 @@
<useFile>0</useFile>
<TextAddressRange>0x00000000</TextAddressRange>
<DataAddressRange>0x10000000</DataAddressRange>
<pXoBase />
<pXoBase></pXoBase>
<ScatterFile>.\Libraries\arm\MIMXRT1052xxxxx_flexspi_nor.scf</ScatterFile>
<IncludeLibs />
<IncludeLibsPath />
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab) --keep *.o(VSymTab) </Misc>
<LinkerInputFile />
<DisabledWarnings />
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
......@@ -382,22 +383,16 @@
<FileType>1</FileType>
<FilePath>applications\device_test.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>main.c</FileName>
<FileType>1</FileType>
<FilePath>applications\main.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mem_dump.c</FileName>
<FileType>1</FileType>
<FilePath>applications\mem_dump.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mem_test.c</FileName>
<FileType>1</FileType>
......@@ -413,77 +408,67 @@
<FileType>1</FileType>
<FilePath>drivers\board.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_uart.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_uart.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_cache.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_cache.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_sdram.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_sdram.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_pin.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_pin.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_rtc.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_rtc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_spi_bus.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_spi_bus.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_i2c.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_i2c.c</FilePath>
</File>
<File>
<FileName>drv_lcd.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_lcd.c</FilePath>
</File>
<File>
<FileName>drv_sdio.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_sdio.c</FilePath>
</File>
<File>
<FileName>hyper_flash_boot.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\hyper_flash_boot.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_eth.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_eth.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_phy.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\fsl_phy.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_sdio.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_sdio.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Libraries</GroupName>
......@@ -493,421 +478,301 @@
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_adc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_adc_etc.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_adc_etc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_aipstz.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_aipstz.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_aoi.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_aoi.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_bee.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_bee.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_cache.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_cache.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_clock.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_clock.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_cmp.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_cmp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_common.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_common.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_csi.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_csi.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_dcdc.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_dcdc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_dcp.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_dcp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_dmamux.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_dmamux.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_elcdif.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_elcdif.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_enc.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_enc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_enet.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_enet.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_ewm.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_ewm.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexcan.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexcan.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio_i2c_master.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio_i2c_master.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio_i2s.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio_i2s.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio_i2s_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio_i2s_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio_spi.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio_spi.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio_spi_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio_spi_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio_uart.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio_uart.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexio_uart_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexio_uart_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexram.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexram.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_flexspi.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_flexspi.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_gpc.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_gpc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_gpio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_gpt.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_gpt.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_kpp.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_kpp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_lpi2c.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_lpi2c.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_lpi2c_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_lpi2c_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_lpspi.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_lpspi.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_lpspi_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_lpspi_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_lpuart.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_lpuart.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_lpuart_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_lpuart_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_pit.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_pit.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_pmu.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_pmu.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_pwm.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_pwm.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_pxp.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_pxp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_qtmr.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_qtmr.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_rtwdog.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_rtwdog.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_sai.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_sai.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_sai_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_sai_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_semc.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_semc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_snvs_hp.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_snvs_hp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_snvs_lp.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_snvs_lp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_spdif.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_spdif.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_spdif_edma.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_spdif_edma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_src.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_src.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_trng.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_trng.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_tsc.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_tsc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_usdhc.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_usdhc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_wdog.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_wdog.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_xbara.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_xbara.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>fsl_xbarb.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\drivers\fsl_xbarb.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>system_MIMXRT1052.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\system_MIMXRT1052.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>startup_MIMXRT1052.s</FileName>
<FileType>2</FileType>
......@@ -923,85 +788,61 @@
<FileType>1</FileType>
<FilePath>..\..\src\clock.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>components.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\components.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>device.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\device.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>idle.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\idle.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ipc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\ipc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>irq.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\irq.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>kservice.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\kservice.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>memheap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\memheap.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>object.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\object.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>scheduler.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\scheduler.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>signal.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\signal.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>thread.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\thread.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>timer.c</FileName>
<FileType>1</FileType>
......@@ -1017,29 +858,21 @@
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\cortex-m7\cpuport.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>context_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\libcpu\arm\cortex-m7\context_rvds.S</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>backtrace.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\common\backtrace.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>div0.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\common\div0.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>showmem.c</FileName>
<FileType>1</FileType>
......@@ -1055,50 +888,36 @@
<FileType>1</FileType>
<FilePath>..\..\components\dfs\src\dfs.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dfs_file.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\dfs\src\dfs_file.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dfs_fs.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\dfs\src\dfs_fs.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dfs_posix.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\dfs\src\dfs_posix.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>devfs.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\dfs\filesystems\devfs\devfs.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dfs_elm.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\dfs\filesystems\elmfat\dfs_elm.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ff.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\dfs\filesystems\elmfat\ff.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ccsbcs.c</FileName>
<FileType>1</FileType>
......@@ -1108,151 +927,171 @@
</Group>
<Group>
<GroupName>DeviceDrivers</GroupName>
<GroupOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>0</ComprImg>
</CommonProperty>
<GroupArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls></MiscControls>
<Define> </Define>
<Undefine> </Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
<Aads>
<interw>2</interw>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<thumb>2</thumb>
<SplitLS>2</SplitLS>
<SwStkChk>2</SwStkChk>
<NoWarn>2</NoWarn>
<uSurpInc>2</uSurpInc>
<useXO>2</useXO>
<uClangAs>2</uClangAs>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
</GroupArmAds>
</GroupOption>
<Files>
<File>
<FileName>i2c_core.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\i2c\i2c_core.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>i2c_dev.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\i2c\i2c_dev.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>i2c-bit-ops.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\i2c\i2c-bit-ops.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>pin.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\misc\pin.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>rtc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\rtc\rtc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>block_dev.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\sdio\block_dev.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mmcsd_core.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\sdio\mmcsd_core.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>sd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\sdio\sd.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>sdio.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\sdio\sdio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mmc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\sdio\mmc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>serial.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\serial\serial.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>spi_core.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\spi\spi_core.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>spi_dev.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\spi\spi_dev.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>completion.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\completion.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dataqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\dataqueue.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>pipe.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\pipe.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ringbuffer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\ringbuffer.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>waitqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\waitqueue.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>workqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\workqueue.c</FilePath>
</File>
</Files>
<GroupOption>
<GroupArmAds>
<Cads>
<VariousControls>
<MiscControls />
<Define> </Define>
<Undefine> </Undefine>
<IncludePath> </IncludePath>
</VariousControls>
</Cads>
</GroupArmAds>
</GroupOption>
</Group>
<Group>
<GroupName>finsh</GroupName>
......@@ -1262,106 +1101,76 @@
<FileType>1</FileType>
<FilePath>..\..\components\finsh\shell.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>symbol.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\symbol.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\cmd.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\msh.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh_cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\msh_cmd.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh_file.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\msh_file.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_compiler.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_compiler.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_error.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_error.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_heap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_heap.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_init.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_init.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_node.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_node.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_ops.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_ops.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_parser.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_parser.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_var.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_var.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_vm.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_vm.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>finsh_token.c</FileName>
<FileType>1</FileType>
......@@ -1377,36 +1186,26 @@
<FileType>1</FileType>
<FilePath>..\..\components\libc\compilers\armlibc\libc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>libc_syms.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\libc\compilers\armlibc\libc_syms.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mem_std.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\libc\compilers\armlibc\mem_std.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stdio.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\libc\compilers\armlibc\stdio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stubs.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\libc\compilers\armlibc\stubs.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>time.c</FileName>
<FileType>1</FileType>
......@@ -1422,246 +1221,176 @@
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\arch\sys_arch.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>api_lib.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\api_lib.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>api_msg.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\api_msg.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>err.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\err.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>netbuf.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\netbuf.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>netdb.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\netdb.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>netifapi.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\netifapi.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>sockets.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\sockets.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>tcpip.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\api\tcpip.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>def.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\def.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dns.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\dns.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>inet_chksum.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\inet_chksum.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>init.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\init.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ip.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ip.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>memp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\memp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>netif.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\netif.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>pbuf.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\pbuf.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>raw.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\raw.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stats.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\stats.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>sys.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\sys.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>tcp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\tcp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>tcp_in.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\tcp_in.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>tcp_out.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\tcp_out.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>timeouts.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\timeouts.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>udp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\udp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ethernet.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\netif\ethernet.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ethernetif.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\netif\ethernetif.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>lowpan6.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\netif\lowpan6.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>autoip.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\autoip.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dhcp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\dhcp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>etharp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\etharp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>icmp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\icmp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>igmp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\igmp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ip4.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\ip4.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ip4_addr.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\ip4_addr.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ip4_frag.c</FileName>
<FileType>1</FileType>
......@@ -1669,19 +1398,24 @@
</File>
</Files>
</Group>
<Group>
<GroupName>::CMSIS</GroupName>
</Group>
</Groups>
</Target>
</Targets>
<RTE>
<apis />
<apis/>
<components>
<component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.0.2" condition="ARMv6_7_8-M Device">
<package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.0" />
<package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.0"/>
<targetInfos>
<targetInfo name="RT-Thread IMXRT1052" />
<targetInfo name="RT-Thread IMXRT1052"/>
</targetInfos>
</component>
</components>
<files />
<files/>
</RTE>
</Project>
bsp/imxrt1052-evk/rtconfig.h
浏览文件 @ f9e58990
......@@ -200,20 +200,36 @@
#define RT_USING_UART1
/* Select spi bus drivers */
/* Select spi bus and dev drivers */
#define LPSPI_CLK_SOURCE_FROM_PLL3PFD1
#define LPSPI_CLK_SOURCE 0
#define LPSPI_CLK_SOURCE_DIVIDER 7
#define LPSPI_CLK_SOURCE_DIVIDER 8
#define RT_USING_SPIBUS4
#define LPSPI4_SCK_GPIO_1
#define LPSPI4_SDO_GPIO_1
#define LPSPI4_SDI_GPIO_1
/* Select iic drivers */
/* Select i2c bus drivers */
#define LPI2C_CLOCK_SOURCE_DIVIDER 4
#define RT_USING_I2C1
/* Select lcd driver */
/* Notice: Evk Board para: 480*272 4 4 8 2 40 10 106 45 */
#define RT_USING_LCD
#define LCD_WIDTH 480
#define LCD_HEIGHT 272
#define LCD_HFP 4
#define LCD_VFP 4
#define LCD_HBP 8
#define LCD_VBP 2
#define LCD_HSW 40
#define LCD_VSW 10
#define LCD_BL_PIN 106
#define LCD_RST_PIN 45
#define RT_USING_SDRAM
#define RT_USING_RTC_HP
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或