# Copyright (c) 2019 PaddlePaddle Authors. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. """Finetuning on classification tasks.""" from __future__ import absolute_import from __future__ import division from __future__ import print_function import os import time import argparse import numpy as np import subprocess import multiprocessing import paddle import paddle.fluid as fluid import reader.cls as reader from model.bert import BertConfig from model.classifier import create_model from optimization import optimization from utils.args import ArgumentGroup, print_arguments, check_cuda from utils.init import init_pretraining_params, init_checkpoint from utils.cards import get_cards import dist_utils num_trainers = int(os.environ.get('PADDLE_TRAINERS_NUM', 1)) # yapf: disable parser = argparse.ArgumentParser(__doc__) model_g = ArgumentGroup(parser, "model", "model configuration and paths.") model_g.add_arg("bert_config_path", str, None, "Path to the json file for bert model config.") model_g.add_arg("init_checkpoint", str, None, "Init checkpoint to resume training from.") model_g.add_arg("init_pretraining_params", str, None, "Init pre-training params which preforms fine-tuning from. If the " "arg 'init_checkpoint' has been set, this argument wouldn't be valid.") model_g.add_arg("checkpoints", str, "checkpoints", "Path to save checkpoints.") train_g = ArgumentGroup(parser, "training", "training options.") train_g.add_arg("epoch", int, 3, "Number of epoches for fine-tuning.") train_g.add_arg("learning_rate", float, 5e-5, "Learning rate used to train with warmup.") train_g.add_arg("lr_scheduler", str, "linear_warmup_decay", "scheduler of learning rate.", choices=['linear_warmup_decay', 'noam_decay']) train_g.add_arg("weight_decay", float, 0.01, "Weight decay rate for L2 regularizer.") train_g.add_arg("warmup_proportion", float, 0.1, "Proportion of training steps to perform linear learning rate warmup for.") train_g.add_arg("save_steps", int, 10000, "The steps interval to save checkpoints.") train_g.add_arg("validation_steps", int, 1000, "The steps interval to evaluate model performance.") train_g.add_arg("use_fp16", bool, False, "Whether to use fp16 mixed precision training.") train_g.add_arg("loss_scaling", float, 1.0, "Loss scaling factor for mixed precision training, only valid when use_fp16 is enabled.") log_g = ArgumentGroup(parser, "logging", "logging related.") log_g.add_arg("skip_steps", int, 10, "The steps interval to print loss.") log_g.add_arg("verbose", bool, False, "Whether to output verbose log.") data_g = ArgumentGroup(parser, "data", "Data paths, vocab paths and data processing options") data_g.add_arg("data_dir", str, None, "Path to training data.") data_g.add_arg("vocab_path", str, None, "Vocabulary path.") data_g.add_arg("max_seq_len", int, 512, "Number of words of the longest seqence.") data_g.add_arg("batch_size", int, 32, "Total examples' number in batch for training. see also --in_tokens.") data_g.add_arg("in_tokens", bool, False, "If set, the batch size will be the maximum number of tokens in one batch. " "Otherwise, it will be the maximum number of examples in one batch.") data_g.add_arg("do_lower_case", bool, True, "Whether to lower case the input text. Should be True for uncased models and False for cased models.") data_g.add_arg("random_seed", int, 0, "Random seed.") run_type_g = ArgumentGroup(parser, "run_type", "running type options.") run_type_g.add_arg("use_cuda", bool, True, "If set, use GPU for training.") run_type_g.add_arg("use_fast_executor", bool, False, "If set, use fast parallel executor (in experiment).") run_type_g.add_arg("shuffle", bool, True, "") run_type_g.add_arg("num_iteration_per_drop_scope", int, 1, "Ihe iteration intervals to clean up temporary variables.") run_type_g.add_arg("task_name", str, None, "The name of task to perform fine-tuning, should be in {'xnli', 'mnli', 'cola', 'mrpc'}.") run_type_g.add_arg("do_train", bool, True, "Whether to perform training.") run_type_g.add_arg("do_val", bool, True, "Whether to perform evaluation on dev data set.") run_type_g.add_arg("do_test", bool, True, "Whether to perform evaluation on test data set.") parser.add_argument("--enable_ce", action='store_true', help="The flag indicating whether to run the task for continuous evaluation.") args = parser.parse_args() # yapf: enable. def evaluate(exe, test_program, test_pyreader, fetch_list, eval_phase): test_pyreader.start() total_cost, total_acc, total_num_seqs = [], [], [] time_begin = time.time() while True: try: np_loss, np_acc, np_num_seqs = exe.run(program=test_program, fetch_list=fetch_list) total_cost.extend(np_loss * np_num_seqs) total_acc.extend(np_acc * np_num_seqs) total_num_seqs.extend(np_num_seqs) except fluid.core.EOFException: test_pyreader.reset() break time_end = time.time() print("[%s evaluation] ave loss: %f, ave acc: %f, elapsed time: %f s" % (eval_phase, np.sum(total_cost) / np.sum(total_num_seqs), np.sum(total_acc) / np.sum(total_num_seqs), time_end - time_begin)) def get_device_num(): # NOTE(zcd): for multi-processe training, each process use one GPU card. if num_trainers > 1 : return 1 visible_device = os.environ.get('CUDA_VISIBLE_DEVICES', None) if visible_device: device_num = len(visible_device.split(',')) else: device_num = subprocess.check_output(['nvidia-smi','-L']).decode().count('\n') return device_num def main(args): bert_config = BertConfig(args.bert_config_path) bert_config.print_config() if args.use_cuda: place = fluid.CUDAPlace(int(os.getenv('FLAGS_selected_gpus', '0'))) dev_count = get_device_num() else: place = fluid.CPUPlace() dev_count = int(os.environ.get('CPU_NUM', multiprocessing.cpu_count())) exe = fluid.Executor(place) task_name = args.task_name.lower() processors = { 'xnli': reader.XnliProcessor, 'cola': reader.ColaProcessor, 'mrpc': reader.MrpcProcessor, 'mnli': reader.MnliProcessor, } processor = processors[task_name](data_dir=args.data_dir, vocab_path=args.vocab_path, max_seq_len=args.max_seq_len, do_lower_case=args.do_lower_case, in_tokens=args.in_tokens, random_seed=args.random_seed) num_labels = len(processor.get_labels()) if not (args.do_train or args.do_val or args.do_test): raise ValueError("For args `do_train`, `do_val` and `do_test`, at " "least one of them must be True.") train_program = fluid.Program() startup_prog = fluid.Program() if args.random_seed is not None: startup_prog.random_seed = args.random_seed train_program.random_seed = args.random_seed if args.do_train: # NOTE: If num_trainers > 1, the shuffle_seed must be set, because # the order of batch data generated by reader # must be the same in the respective processes. shuffle_seed = 1 if num_trainers > 1 else None train_data_generator = processor.data_generator( batch_size=args.batch_size, phase='train', epoch=args.epoch, dev_count=dev_count, shuffle=args.shuffle, shuffle_seed=shuffle_seed) num_train_examples = processor.get_num_examples(phase='train') if args.in_tokens: max_train_steps = args.epoch * num_train_examples // ( args.batch_size // args.max_seq_len) // dev_count else: max_train_steps = args.epoch * num_train_examples // args.batch_size // dev_count warmup_steps = int(max_train_steps * args.warmup_proportion) print("Device count: %d" % dev_count) print("Num train examples: %d" % num_train_examples) print("Max train steps: %d" % max_train_steps) print("Num warmup steps: %d" % warmup_steps) with fluid.program_guard(train_program, startup_prog): with fluid.unique_name.guard(): train_pyreader, loss, probs, accuracy, num_seqs = create_model( args, bert_config=bert_config, num_labels=num_labels) scheduled_lr = optimization( loss=loss, warmup_steps=warmup_steps, num_train_steps=max_train_steps, learning_rate=args.learning_rate, train_program=train_program, startup_prog=startup_prog, weight_decay=args.weight_decay, scheduler=args.lr_scheduler, use_fp16=args.use_fp16, loss_scaling=args.loss_scaling) if args.verbose: if args.in_tokens: lower_mem, upper_mem, unit = fluid.contrib.memory_usage( program=train_program, batch_size=args.batch_size // args.max_seq_len) else: lower_mem, upper_mem, unit = fluid.contrib.memory_usage( program=train_program, batch_size=args.batch_size) print("Theoretical memory usage in training: %.3f - %.3f %s" % (lower_mem, upper_mem, unit)) if args.do_val: dev_prog = fluid.Program() with fluid.program_guard(dev_prog, startup_prog): with fluid.unique_name.guard(): dev_pyreader, loss, probs, accuracy, num_seqs = create_model( args, bert_config=bert_config, num_labels=num_labels) dev_prog = dev_prog.clone(for_test=True) dev_pyreader.decorate_batch_generator( processor.data_generator( batch_size=args.batch_size, phase='dev', epoch=1, dev_count=1, shuffle=False), place) if args.do_test: test_prog = fluid.Program() with fluid.program_guard(test_prog, startup_prog): with fluid.unique_name.guard(): test_pyreader, loss, probs, accuracy, num_seqs = create_model( args, bert_config=bert_config, num_labels=num_labels) test_prog = test_prog.clone(for_test=True) test_pyreader.decorate_batch_generator( processor.data_generator( batch_size=args.batch_size, phase='test', epoch=1, dev_count=1, shuffle=False), place) exe.run(startup_prog) if args.do_train: if args.init_checkpoint and args.init_pretraining_params: print( "WARNING: args 'init_checkpoint' and 'init_pretraining_params' " "both are set! Only arg 'init_checkpoint' is made valid.") if args.init_checkpoint: init_checkpoint( exe, args.init_checkpoint, main_program=startup_prog, use_fp16=args.use_fp16) elif args.init_pretraining_params: init_pretraining_params( exe, args.init_pretraining_params, main_program=startup_prog, use_fp16=args.use_fp16) elif args.do_val or args.do_test: if not args.init_checkpoint: raise ValueError("args 'init_checkpoint' should be set if" "only doing validation or testing!") init_checkpoint( exe, args.init_checkpoint, main_program=startup_prog, use_fp16=args.use_fp16) if args.do_train: exec_strategy = fluid.ExecutionStrategy() exec_strategy.use_experimental_executor = args.use_fast_executor exec_strategy.num_threads = dev_count exec_strategy.num_iteration_per_drop_scope = args.num_iteration_per_drop_scope build_strategy = fluid.BuildStrategy() if args.use_cuda and num_trainers > 1: assert shuffle_seed is not None dist_utils.prepare_for_multi_process(exe, build_strategy, train_program) train_data_generator = fluid.contrib.reader.distributed_batch_reader( train_data_generator) train_compiled_program = fluid.CompiledProgram(train_program).with_data_parallel( loss_name=loss.name, build_strategy=build_strategy) train_pyreader.decorate_batch_generator(train_data_generator, place) if args.do_train: train_pyreader.start() steps = 0 total_cost, total_acc, total_num_seqs = [], [], [] time_begin = time.time() throughput = [] ce_info = [] while True: try: # steps += 1 if steps % args.skip_steps == 0: if warmup_steps <= 0: fetch_list = [loss.name, accuracy.name, num_seqs.name] else: fetch_list = [ loss.name, accuracy.name, scheduled_lr.name, num_seqs.name ] else: fetch_list = [] outputs = exe.run(train_compiled_program, fetch_list=fetch_list) if steps % args.skip_steps == 0: if warmup_steps <= 0: np_loss, np_acc, np_num_seqs = outputs else: np_loss, np_acc, np_lr, np_num_seqs = outputs total_cost.extend(np_loss * np_num_seqs) total_acc.extend(np_acc * np_num_seqs) total_num_seqs.extend(np_num_seqs) if args.verbose: verbose = "train pyreader queue size: %d, " % train_pyreader.queue.size( ) verbose += "learning rate: %f" % ( np_lr[0] if warmup_steps > 0 else args.learning_rate) print(verbose) current_example, current_epoch = processor.get_train_progress( ) time_end = time.time() used_time = time_end - time_begin log_record = "epoch: {}, progress: {}/{}, step: {}, ave loss: {}, ave acc: {}".format( current_epoch, current_example, num_train_examples, steps, np.sum(total_cost) / np.sum(total_num_seqs), np.sum(total_acc) / np.sum(total_num_seqs)) ce_info.append([np.sum(total_cost) / np.sum(total_num_seqs), np.sum(total_acc) / np.sum(total_num_seqs), used_time]) if steps > 0 : throughput.append( args.skip_steps / used_time) log_record = log_record + ", speed: %f steps/s" % (args.skip_steps / used_time) print(log_record) else: print(log_record) total_cost, total_acc, total_num_seqs = [], [], [] time_begin = time.time() steps += 1 if steps % args.save_steps == 0: save_path = os.path.join(args.checkpoints, "step_" + str(steps)) fluid.io.save_persistables(exe, save_path, train_program) if steps % args.validation_steps == 0: print("Average throughtput: %s" % (np.average(throughput))) throughput = [] # evaluate dev set if args.do_val: evaluate(exe, dev_prog, dev_pyreader, [loss.name, accuracy.name, num_seqs.name], "dev") # evaluate test set if args.do_test: evaluate(exe, test_prog, test_pyreader, [loss.name, accuracy.name, num_seqs.name], "test") except fluid.core.EOFException: save_path = os.path.join(args.checkpoints, "step_" + str(steps)) fluid.io.save_persistables(exe, save_path, train_program) train_pyreader.reset() break if args.enable_ce: card_num = get_cards() ce_cost = 0 ce_acc = 0 ce_time = 0 try: ce_cost = ce_info[-2][0] ce_acc = ce_info[-2][1] ce_time = ce_info[-2][2] except: print("ce info error") print("kpis\ttrain_duration_%s_card%s\t%s" % (args.task_name, card_num, ce_time)) print("kpis\ttrain_cost_%s_card%s\t%f" % (args.task_name, card_num, ce_cost)) print("kpis\ttrain_acc_%s_card%s\t%f" % (args.task_name, card_num, ce_acc)) # final eval on dev set if args.do_val: print("Final validation result:") evaluate(exe, dev_prog, dev_pyreader, [loss.name, accuracy.name, num_seqs.name], "dev") # final eval on test set if args.do_test: print("Final test result:") evaluate(exe, test_prog, test_pyreader, [loss.name, accuracy.name, num_seqs.name], "test") if __name__ == '__main__': print_arguments(args) check_cuda(args.use_cuda) main(args)