# Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # pylint: disable=doc-string-missing import os from .proto import server_configure_pb2 as server_sdk from .proto import general_model_config_pb2 as m_config import google.protobuf.text_format import tarfile import socket import paddle_serving_server as paddle_serving_server from .version import serving_server_version from contextlib import closing import collections class OpMaker(object): def __init__(self): self.op_dict = { "general_infer": "GeneralInferOp", "general_reader": "GeneralReaderOp", "general_response": "GeneralResponseOp", "general_text_reader": "GeneralTextReaderOp", "general_text_response": "GeneralTextResponseOp", "general_single_kv": "GeneralSingleKVOp", "general_dist_kv_infer": "GeneralDistKVInferOp", "general_dist_kv_quant_infer": "GeneralDistKVQuantInferOp", "general_copy": "GeneralCopyOp" } self.node_name_suffix_ = collections.defaultdict(int) def create(self, node_type, engine_name=None, inputs=[], outputs=[]): if node_type not in self.op_dict: raise Exception("Op type {} is not supported right now".format( node_type)) node = server_sdk.DAGNode() # node.name will be used as the infer engine name if engine_name: node.name = engine_name else: node.name = '{}_{}'.format(node_type, self.node_name_suffix_[node_type]) self.node_name_suffix_[node_type] += 1 node.type = self.op_dict[node_type] if inputs: for dep_node_str in inputs: dep_node = server_sdk.DAGNode() google.protobuf.text_format.Parse(dep_node_str, dep_node) dep = server_sdk.DAGNodeDependency() dep.name = dep_node.name dep.mode = "RO" node.dependencies.extend([dep]) # Because the return value will be used as the key value of the # dict, and the proto object is variable which cannot be hashed, # so it is processed into a string. This has little effect on # overall efficiency. return google.protobuf.text_format.MessageToString(node) class OpSeqMaker(object): def __init__(self): self.workflow = server_sdk.Workflow() self.workflow.name = "workflow1" self.workflow.workflow_type = "Sequence" def add_op(self, node_str): node = server_sdk.DAGNode() google.protobuf.text_format.Parse(node_str, node) if len(node.dependencies) > 1: raise Exception( 'Set more than one predecessor for op in OpSeqMaker is not allowed.' ) if len(self.workflow.nodes) >= 1: if len(node.dependencies) == 0: dep = server_sdk.DAGNodeDependency() dep.name = self.workflow.nodes[-1].name dep.mode = "RO" node.dependencies.extend([dep]) elif len(node.dependencies) == 1: if node.dependencies[0].name != self.workflow.nodes[-1].name: raise Exception( 'You must add op in order in OpSeqMaker. The previous op is {}, but the current op is followed by {}.'. format(node.dependencies[0].name, self.workflow.nodes[ -1].name)) self.workflow.nodes.extend([node]) def get_op_sequence(self): workflow_conf = server_sdk.WorkflowConf() workflow_conf.workflows.extend([self.workflow]) return workflow_conf class OpGraphMaker(object): def __init__(self): self.workflow = server_sdk.Workflow() self.workflow.name = "workflow1" # Currently, SDK only supports "Sequence" self.workflow.workflow_type = "Sequence" def add_op(self, node_str): node = server_sdk.DAGNode() google.protobuf.text_format.Parse(node_str, node) self.workflow.nodes.extend([node]) def get_op_graph(self): workflow_conf = server_sdk.WorkflowConf() workflow_conf.workflows.extend([self.workflow]) return workflow_conf class Server(object): def __init__(self): self.server_handle_ = None self.infer_service_conf = None self.model_toolkit_conf = None self.resource_conf = None self.memory_optimization = False self.model_conf = None self.workflow_fn = "workflow.prototxt" self.resource_fn = "resource.prototxt" self.infer_service_fn = "infer_service.prototxt" self.model_toolkit_fn = "model_toolkit.prototxt" self.general_model_config_fn = "general_model.prototxt" self.cube_config_fn = "cube.conf" self.workdir = "" self.max_concurrency = 0 self.num_threads = 4 self.port = 8080 self.reload_interval_s = 10 self.max_body_size = 64 * 1024 * 1024 self.module_path = os.path.dirname(paddle_serving_server.__file__) self.cur_path = os.getcwd() self.use_local_bin = False self.mkl_flag = False self.model_config_paths = None # for multi-model in a workflow def set_max_concurrency(self, concurrency): self.max_concurrency = concurrency def set_num_threads(self, threads): self.num_threads = threads def set_max_body_size(self, body_size): if body_size >= self.max_body_size: self.max_body_size = body_size else: print( "max_body_size is less than default value, will use default value in service." ) def set_port(self, port): self.port = port def set_reload_interval(self, interval): self.reload_interval_s = interval def set_op_sequence(self, op_seq): self.workflow_conf = op_seq def set_op_graph(self, op_graph): self.workflow_conf = op_graph def set_memory_optimize(self, flag=False): self.memory_optimization = flag def check_local_bin(self): if "SERVING_BIN" in os.environ: self.use_local_bin = True self.bin_path = os.environ["SERVING_BIN"] def _prepare_engine(self, model_config_paths, device): if self.model_toolkit_conf == None: self.model_toolkit_conf = server_sdk.ModelToolkitConf() for engine_name, model_config_path in model_config_paths.items(): engine = server_sdk.EngineDesc() engine.name = engine_name engine.reloadable_meta = model_config_path + "/fluid_time_file" os.system("touch {}".format(engine.reloadable_meta)) engine.reloadable_type = "timestamp_ne" engine.runtime_thread_num = 0 engine.batch_infer_size = 0 engine.enable_batch_align = 0 engine.model_data_path = model_config_path engine.enable_memory_optimization = self.memory_optimization engine.static_optimization = False engine.force_update_static_cache = False if device == "cpu": engine.type = "FLUID_CPU_ANALYSIS_DIR" elif device == "gpu": engine.type = "FLUID_GPU_ANALYSIS_DIR" self.model_toolkit_conf.engines.extend([engine]) def _prepare_infer_service(self, port): if self.infer_service_conf == None: self.infer_service_conf = server_sdk.InferServiceConf() self.infer_service_conf.port = port infer_service = server_sdk.InferService() infer_service.name = "GeneralModelService" infer_service.workflows.extend(["workflow1"]) self.infer_service_conf.services.extend([infer_service]) def _prepare_resource(self, workdir): if self.resource_conf == None: with open("{}/{}".format(workdir, self.general_model_config_fn), "w") as fout: fout.write(str(self.model_conf)) self.resource_conf = server_sdk.ResourceConf() for workflow in self.workflow_conf.workflows: for node in workflow.nodes: if "dist_kv" in node.name: self.resource_conf.cube_config_path = workdir self.resource_conf.cube_config_file = self.cube_config_fn if "quant" in node.name: self.resource_conf.cube_quant_bits = 8 self.resource_conf.model_toolkit_path = workdir self.resource_conf.model_toolkit_file = self.model_toolkit_fn self.resource_conf.general_model_path = workdir self.resource_conf.general_model_file = self.general_model_config_fn def _write_pb_str(self, filepath, pb_obj): with open(filepath, "w") as fout: fout.write(str(pb_obj)) def load_model_config(self, model_config_paths): # At present, Serving needs to configure the model path in # the resource.prototxt file to determine the input and output # format of the workflow. To ensure that the input and output # of multiple models are the same. workflow_oi_config_path = None if isinstance(model_config_paths, str): # If there is only one model path, use the default infer_op. # Because there are several infer_op type, we need to find # it from workflow_conf. default_engine_names = [ 'general_infer_0', 'general_dist_kv_infer_0', 'general_dist_kv_quant_infer_0' ] engine_name = None for node in self.workflow_conf.workflows[0].nodes: if node.name in default_engine_names: engine_name = node.name break if engine_name is None: raise Exception( "You have set the engine_name of Op. Please use the form {op: model_path} to configure model path" ) self.model_config_paths = {engine_name: model_config_paths} workflow_oi_config_path = self.model_config_paths[engine_name] elif isinstance(model_config_paths, dict): self.model_config_paths = {} for node_str, path in model_config_paths.items(): node = server_sdk.DAGNode() google.protobuf.text_format.Parse(node_str, node) self.model_config_paths[node.name] = path print("You have specified multiple model paths, please ensure " "that the input and output of multiple models are the same.") workflow_oi_config_path = self.model_config_paths.items()[0][1] else: raise Exception("The type of model_config_paths must be str or " "dict({op: model_path}), not {}.".format( type(model_config_paths))) self.model_conf = m_config.GeneralModelConfig() f = open( "{}/serving_server_conf.prototxt".format(workflow_oi_config_path), 'r') self.model_conf = google.protobuf.text_format.Merge( str(f.read()), self.model_conf) # check config here # print config here def use_mkl(self): self.mkl_flag = True def get_device_version(self): avx_flag = False mkl_flag = self.mkl_flag openblas_flag = False r = os.system("cat /proc/cpuinfo | grep avx > /dev/null 2>&1") if r == 0: avx_flag = True if avx_flag: if mkl_flag: device_version = "serving-cpu-avx-mkl-" else: device_version = "serving-cpu-avx-openblas-" else: device_version = "serving-cpu-noavx-openblas-" return device_version def download_bin(self): os.chdir(self.module_path) need_download = False device_version = self.get_device_version() floder_name = device_version + serving_server_version tar_name = floder_name + ".tar.gz" bin_url = "https://paddle-serving.bj.bcebos.com/bin/" + tar_name self.server_path = os.path.join(self.module_path, floder_name) if not os.path.exists(self.server_path): print('Frist time run, downloading PaddleServing components ...') r = os.system('wget ' + bin_url + ' --no-check-certificate') if r != 0: if os.path.exists(tar_name): os.remove(tar_name) raise SystemExit( 'Download failed, please check your network or permission of {}.'. format(self.module_path)) else: try: print('Decompressing files ..') tar = tarfile.open(tar_name) tar.extractall() tar.close() except: if os.path.exists(exe_path): os.remove(exe_path) raise SystemExit( 'Decompressing failed, please check your permission of {} or disk space left.'. foemat(self.module_path)) finally: os.remove(tar_name) os.chdir(self.cur_path) self.bin_path = self.server_path + "/serving" def prepare_server(self, workdir=None, port=9292, device="cpu"): if workdir == None: workdir = "./tmp" os.system("mkdir {}".format(workdir)) else: os.system("mkdir {}".format(workdir)) os.system("touch {}/fluid_time_file".format(workdir)) if not self.port_is_available(port): raise SystemExit("Prot {} is already used".format(port)) self._prepare_resource(workdir) self._prepare_engine(self.model_config_paths, device) self._prepare_infer_service(port) self.port = port self.workdir = workdir infer_service_fn = "{}/{}".format(workdir, self.infer_service_fn) workflow_fn = "{}/{}".format(workdir, self.workflow_fn) resource_fn = "{}/{}".format(workdir, self.resource_fn) model_toolkit_fn = "{}/{}".format(workdir, self.model_toolkit_fn) self._write_pb_str(infer_service_fn, self.infer_service_conf) self._write_pb_str(workflow_fn, self.workflow_conf) self._write_pb_str(resource_fn, self.resource_conf) self._write_pb_str(model_toolkit_fn, self.model_toolkit_conf) def port_is_available(self, port): with closing(socket.socket(socket.AF_INET, socket.SOCK_STREAM)) as sock: sock.settimeout(2) result = sock.connect_ex(('0.0.0.0', port)) if result != 0: return True else: return False def run_server(self): # just run server with system command # currently we do not load cube self.check_local_bin() if not self.use_local_bin: self.download_bin() else: print("Use local bin : {}".format(self.bin_path)) command = "{} " \ "-enable_model_toolkit " \ "-inferservice_path {} " \ "-inferservice_file {} " \ "-max_concurrency {} " \ "-num_threads {} " \ "-port {} " \ "-reload_interval_s {} " \ "-resource_path {} " \ "-resource_file {} " \ "-workflow_path {} " \ "-workflow_file {} " \ "-bthread_concurrency {} " \ "-max_body_size {} ".format( self.bin_path, self.workdir, self.infer_service_fn, self.max_concurrency, self.num_threads, self.port, self.reload_interval_s, self.workdir, self.resource_fn, self.workdir, self.workflow_fn, self.num_threads, self.max_body_size) print("Going to Run Command") print(command) os.system(command)