// Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #include "paddle/fluid/imperative/reducer.h" #include #include "paddle/fluid/framework/tensor_util.h" #include "paddle/fluid/imperative/layer.h" #include "paddle/fluid/imperative/parallel_context.h" #include "paddle/fluid/operators/math/concat_and_split.h" #include "paddle/phi/kernels/funcs/strided_memcpy.h" #ifdef PADDLE_WITH_XPU #include "paddle/fluid/platform/device/xpu/enforce_xpu.h" #endif #include "paddle/fluid/string/string_helper.h" #include "paddle/phi/core/dense_tensor.h" namespace paddle { namespace imperative { #if defined(PADDLE_WITH_NCCL) || defined(PADDLE_WITH_RCCL) || \ defined(PADDLE_WITH_XPU_BKCL) || defined(PADDLE_WITH_GLOO) || \ defined(PADDLE_WITH_ASCEND_CL) || defined(PADDLE_WITH_CNCL) // div the nranks void Group::DivNRanks(const platform::DeviceContext &context, int64_t nranks) { phi::DenseTensor *tensor = is_sparse_ ? sparse_contents_->GetMutable()->mutable_value() : dense_contents_.GetMutable(); if (platform::is_gpu_place(tensor->place())) { #if defined(PADDLE_WITH_NCCL) || defined(PADDLE_WITH_RCCL) DivNRanks(tensor, nranks, context); #endif } else if (platform::is_npu_place(tensor->place())) { // TODO(kuizhiqing) VLOG(4) << "divnrank for npu not support yet"; } else if (platform::is_cpu_place(tensor->place())) { VLOG(4) << "before div 2" << *tensor; VLOG(4) << "NDiv for cpu devices : rank = " << nranks; #ifdef PADDLE_WITH_HIP if (dtype_ == paddle::framework::proto::VarType_Type_BF16) { PADDLE_THROW(paddle::platform::errors::Fatal( "Unsupport BF16 in DataParallel for now")); } framework::VisitDataTypeForHIP( dtype_, DivNRanksForAllReduce(tensor, nranks, context)); #else framework::VisitDataType( dtype_, DivNRanksForAllReduce(tensor, nranks, context)); #endif VLOG(4) << "after div 2" << *tensor; } else if (platform::is_xpu_place(tensor->place())) { #ifdef PADDLE_WITH_XPU_BKCL // TODO(liuyuhui) support xpu about div nranks in the future #endif } else if (platform::is_mlu_place(tensor->place())) { // TODO(zhangna) VLOG(4) << "divnrank for mlu not support yet"; } } template static void ConcatTensorsForAllReduce( const DeviceContext &context, const std::vector &dense_tensors_, framework::Variable *p_dense_contents) { operators::math::ConcatFunctor concat_functor_; concat_functor_(context, dense_tensors_, 0, p_dense_contents->GetMutable()); } template static void SplitTensorsForAllReduce( const DeviceContext &context, framework::Variable *p_dense_contents, std::vector *p_dense_tensors) { auto *in = p_dense_contents->GetMutable(); std::vector outs; std::vector shape_refer; outs.reserve(p_dense_tensors->size()); shape_refer.reserve(p_dense_tensors->size()); for (auto &tensor : *p_dense_tensors) { outs.emplace_back(&tensor); shape_refer.emplace_back(&tensor); } // Sometimes direct copies will be faster if (p_dense_tensors->size() < 10) { phi::funcs::StridedMemcpyWithAxis0(context, *in, shape_refer, &outs); } else { operators::math::SplitFunctor split_functor_; split_functor_(context, *in, shape_refer, 0, &outs); } } // context is used to select the stream for concat template static void ConcatTensorsWithType( const DeviceContext &context, const std::vector &dense_tensors_, framework::Variable *p_dense_contents, framework::proto::VarType::Type type) { switch (type) { case framework::proto::VarType::FP16: ConcatTensorsForAllReduce( context, dense_tensors_, p_dense_contents); break; case framework::proto::VarType::FP32: ConcatTensorsForAllReduce( context, dense_tensors_, p_dense_contents); break; case framework::proto::VarType::FP64: ConcatTensorsForAllReduce( context, dense_tensors_, p_dense_contents); break; default: PADDLE_THROW(platform::errors::Unimplemented( "Data type (%s) is not supported when it concats tensors for " "allreduce.", framework::DataTypeToString(type))); } } // context is used to select the stream for split template static void SplitTensorsWithType(const DeviceContext &context, framework::Variable *p_dense_contents, std::vector *p_dense_tensors, framework::proto::VarType::Type type) { switch (type) { case framework::proto::VarType::FP16: SplitTensorsForAllReduce( context, p_dense_contents, p_dense_tensors); break; case framework::proto::VarType::FP32: SplitTensorsForAllReduce( context, p_dense_contents, p_dense_tensors); break; case framework::proto::VarType::FP64: SplitTensorsForAllReduce( context, p_dense_contents, p_dense_tensors); break; default: PADDLE_THROW(platform::errors::Unimplemented( "Data type (%s) is not supported when it splits tensors for " "allreduce.", framework::DataTypeToString(type))); } } #ifdef PADDLE_WITH_XPU_BKCL template <> void SplitTensorsForAllReduce( const platform::XPUDeviceContext &context, framework::Variable *p_dense_contents, std::vector *p_dense_tensors) { auto *in = p_dense_contents->GetMutable(); std::vector outs; std::vector shape_refer; outs.reserve(p_dense_tensors->size()); shape_refer.reserve(p_dense_tensors->size()); for (auto &tensor : *p_dense_tensors) { outs.emplace_back(&tensor); shape_refer.emplace_back(&tensor); } operators::math::SplitFunctor split_functor_; split_functor_(context, *in, shape_refer, 0, &outs); } // context is used to select the stream for concat template <> void ConcatTensorsWithType( const platform::XPUDeviceContext &context, const std::vector &dense_tensors_, framework::Variable *p_dense_contents, framework::proto::VarType::Type type) { switch (type) { case framework::proto::VarType::FP32: ConcatTensorsForAllReduce( context, dense_tensors_, p_dense_contents); break; default: PADDLE_THROW(platform::errors::Unimplemented( "Data type (%s) is not supported when it concats tensors for " "allreduce.", framework::DataTypeToString(type))); } } // context is used to select the stream for split template <> void SplitTensorsWithType( const platform::XPUDeviceContext &context, framework::Variable *p_dense_contents, std::vector *p_dense_tensors, framework::proto::VarType::Type type) { switch (type) { case framework::proto::VarType::FP32: SplitTensorsForAllReduce( context, p_dense_contents, p_dense_tensors); break; default: PADDLE_THROW(platform::errors::Unimplemented( "Data type (%s) is not supported when it splits tensors for " "allreduce.", framework::DataTypeToString(type))); } } #endif #ifdef PADDLE_WITH_CNCL // context is used to select the stream for concat template <> void ConcatTensorsWithType( const platform::MLUDeviceContext &context, const std::vector &dense_tensors_, framework::Variable *p_dense_contents, framework::proto::VarType::Type type) { switch (type) { case framework::proto::VarType::FP16: ConcatTensorsForAllReduce( context, dense_tensors_, p_dense_contents); break; case framework::proto::VarType::FP32: ConcatTensorsForAllReduce( context, dense_tensors_, p_dense_contents); break; default: PADDLE_THROW(platform::errors::Unimplemented( "Data type (%s) is not supported when it concats tensors for " "allreduce.", framework::DataTypeToString(type))); } } // context is used to select the stream for split template <> void SplitTensorsWithType( const platform::MLUDeviceContext &context, framework::Variable *p_dense_contents, std::vector *p_dense_tensors, framework::proto::VarType::Type type) { switch (type) { case framework::proto::VarType::FP16: SplitTensorsForAllReduce( context, p_dense_contents, p_dense_tensors); break; case framework::proto::VarType::FP32: SplitTensorsForAllReduce( context, p_dense_contents, p_dense_tensors); break; default: PADDLE_THROW(platform::errors::Unimplemented( "Data type (%s) is not supported when it splits tensors for " "allreduce.", framework::DataTypeToString(type))); } } #endif void Group::ConcatTensors(const platform::DeviceContext &context) { auto place = context.GetPlace(); if (platform::is_gpu_place(place)) { #if defined(PADDLE_WITH_NCCL) || defined(PADDLE_WITH_RCCL) ConcatTensorsWithType(static_cast(context), dense_tensors_, &dense_contents_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't concat grad tensors since it's not compiled with NCCL," "Please recompile or reinstall Paddle with NCCL support.")); #endif } else if (platform::is_xpu_place(place)) { #ifdef PADDLE_WITH_XPU_BKCL ConcatTensorsWithType( static_cast(context), dense_tensors_, &dense_contents_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't concat xpu grads since it's not compiled with BKCL," "Please recompile or reinstall Paddle with BKCL support.")); #endif } else if (platform::is_npu_place(place)) { #ifdef PADDLE_WITH_ASCEND_CL ConcatTensorsWithType( static_cast(context), dense_tensors_, &dense_contents_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't concat npu grads since it's not compiled with HCCL," "Please recompile or reinstall Paddle with HCCL support.")); #endif } else if (platform::is_mlu_place(place)) { #ifdef PADDLE_WITH_CNCL ConcatTensorsWithType( static_cast(context), dense_tensors_, &dense_contents_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't concat mlu grads since it's not compiled with CNCL," "Please recompile or reinstall Paddle with CNCL support.")); #endif } else if (platform::is_cpu_place(place)) { ConcatTensorsWithType(static_cast(context), dense_tensors_, &dense_contents_, dtype_); } else { PADDLE_THROW(platform::errors::Unimplemented( "Concat grad tensor not supported on place (%s)", place)); } } void Group::SplitTensors(const platform::DeviceContext &context) { auto place = context.GetPlace(); if (platform::is_gpu_place(place)) { #if defined(PADDLE_WITH_NCCL) || defined(PADDLE_WITH_RCCL) SplitTensorsWithType(static_cast(context), &dense_contents_, &dense_tensors_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't split grad tensor since it's not compiled with NCCL," "Please recompile or reinstall Paddle with NCCL support.")); #endif } else if (platform::is_xpu_place(place)) { #ifdef PADDLE_WITH_XPU_BKCL SplitTensorsWithType( static_cast(context), &dense_contents_, &dense_tensors_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't split xpu grad since it's not compiled with BKCL," "Please recompile or reinstall Paddle with BKCL support.")); #endif } else if (platform::is_npu_place(place)) { #ifdef PADDLE_WITH_ASCEND_CL SplitTensorsWithType( static_cast(context), &dense_contents_, &dense_tensors_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't split npu grad since it's not compiled with HCCL," "Please recompile or reinstall Paddle with HCCL support.")); #endif } else if (platform::is_mlu_place(place)) { #ifdef PADDLE_WITH_CNCL SplitTensorsWithType( static_cast(context), &dense_contents_, &dense_tensors_, dtype_); #else PADDLE_THROW(platform::errors::PermissionDenied( "Paddle can't split mlu grad since it's not compiled with CNCL," "Please recompile or reinstall Paddle with CNCL support.")); #endif } else if (platform::is_cpu_place(place)) { SplitTensorsWithType(static_cast(context), &dense_contents_, &dense_tensors_, dtype_); } else { PADDLE_THROW(platform::errors::Unimplemented( "Split grad tensor not supported on place (%s)", place)); } } std::ostream &operator<<(std::ostream &out, const Group &group) { const auto &vars = group.variable_indices_; out << "numel: " << group.all_length_ << " ;is_sparse: " << group.is_sparse_ << " ;var number: " << vars.size() << "\n"; auto begin = vars.begin(); auto end = vars.end(); out << "["; for (int i = 0; begin != end && i < 100; ++i, ++begin) { if (i > 0) out << ' '; out << *begin; } if (begin != end) { out << " ..."; } out << "]\n"; return out; } Reducer::Reducer(const std::vector> &vars, const std::vector> &group_indices, const std::vector &is_sparse_gradient, std::shared_ptr parallel_ctx, const std::vector &group_size_limits, bool find_unused_vars) : vars_(vars), group_indices_(group_indices), is_sparse_gradient_(is_sparse_gradient), parallel_ctx_(parallel_ctx), group_size_limits_(group_size_limits), find_unused_vars_each_step_(find_unused_vars) { VLOG(3) << "Start construct the Reducer ..."; nrings_ = parallel_ctx->GetNRings(); nranks_ = parallel_ctx->GetNRanks(); // initialize groups InitializeGroups(group_indices); for (size_t global_var_index = 0; global_var_index < vars_.size(); ++global_var_index) { auto var = vars_[global_var_index]; var->GradVarBase()->AddVoidHook(std::make_shared>( [=]() { this->AddDistHook(global_var_index); })); var_index_map_[var->GradVarBase()->SharedVar().get()] = global_var_index; } // for checking var is ready once vars_marked_ready_.resize(vars_.size(), false); // Initialize local used vars local_used_vars_.resize(vars_.size(), 0); } void Reducer::InitializeDenseGroups( const std::vector &variable_indices_, Group *p_group) { int64_t all_length = 0; for (size_t index = 0; index < variable_indices_.size(); ++index) { const auto variable_index = variable_indices_[index]; const auto &var = vars_[variable_index]; const auto &var_name = var->Name(); PADDLE_ENFORCE_EQ(is_sparse_gradient_[variable_index], false, platform::errors::PreconditionNotMet( "Tensor %s's GRAD must be LoDTensor, but received " "GRAD is SelectedRows", var_name)); auto lod_tensor = var->MutableVar()->GetMutable(); PADDLE_ENFORCE_EQ(lod_tensor->IsInitialized(), true, platform::errors::PreconditionNotMet( "Tensor %s is not initialized.", var_name)); const auto size = lod_tensor->numel(); PADDLE_ENFORCE_GT( size, 0, platform::errors::PreconditionNotMet( "The number of tensor %s's elements is 0.", var_name)); all_length += size; p_group->length_.push_back(size); // for concat operator p_group->dense_tensors_.push_back(phi::DenseTensor()); // check the dtype and place, it must be same. const auto &dtype = var->DataType(); const auto &place = var->Place(); if (index > 0) { PADDLE_ENFORCE_EQ( dtype, p_group->dtype_, platform::errors::PreconditionNotMet( "Tensor %s has different dtype. Expected dtype is %s, but actual " "dtype is %s", var_name, framework::DataTypeToString(p_group->dtype_), framework::DataTypeToString(dtype))); PADDLE_ENFORCE_EQ(place, place_, platform::errors::PreconditionNotMet( "Tensor %s has different place. Expected place is " "%s, but actual place is %s", var_name, place_, place)); } else { p_group->dtype_ = dtype; place_ = place; } } p_group->all_length_ = all_length; } // Each parameter will be initialized according to the group information. // For the sparse parameter, sparse_contents_ in the group directly points // to the parameter. For dense parameters, first construct an empty Tensor(). // Then specify the actual memory in MarkDenseVarReady. void Reducer::InitializeGroups( const std::vector> &group_indices) { VLOG(3) << "Start initialize groups .."; // clear the group groups_.clear(); groups_.reserve(group_indices.size()); variable_locators_.clear(); variable_locators_.resize(vars_.size()); auto group_nums = group_indices.size(); for (size_t group_index = 0; group_index < group_nums; ++group_index) { const auto &variable_indices_ = group_indices[group_index]; PADDLE_ENFORCE_GT( variable_indices_.size(), 0, platform::errors::PreconditionNotMet( "The number of group[%d]'s elements is 0.", group_index)); Group group; // It's just for check the sparse or dense auto first_varbase = vars_[variable_indices_.front()]; if (variable_indices_.size() == 1 && is_sparse_gradient_[variable_indices_.front()]) { // process the sparse gradient. one sparse, one group group.dtype_ = first_varbase->DataType(); group.is_sparse_ = true; } else { // process the dense gradient. InitializeDenseGroups(variable_indices_, &group); } // map variables to this group by VariableLocator size_t inside_group_index = 0; for (const auto var_index : variable_indices_) { variable_locators_[var_index] = VariableLocator{ .group_index = group_index, .inside_group_index = inside_group_index++, }; } group.variable_indices_ = std::move(variable_indices_); groups_.emplace_back(std::move(group)); // Debug Message For Reducer VLOG(3) << "The Group[" << group_index << "]:" << groups_.back(); } } void Reducer::PrepareDeps(const std::unordered_set &init_nodes) { PADDLE_ENFORCE_EQ( node_deps_.empty(), true, platform::errors::AlreadyExists("Op deps must be initialized here")); std::queue q; std::unordered_set visited; for (auto pos = init_nodes.begin(); pos != init_nodes.end(); pos++) { q.push(*pos); visited.insert(*pos); } while (!q.empty()) { auto *cur_node = q.front(); q.pop(); const auto &grad_pending_nodes = cur_node->GradPendingNodes(); for (auto &grad_pending_node : grad_pending_nodes) { PADDLE_ENFORCE_NOT_NULL( grad_pending_node, platform::errors::NotFound("Grad pending node should not be null")); // py_layer is not supported in DataParallel auto begin = grad_pending_node->begin(); auto end = grad_pending_node->end(); for (auto op_base = begin; op_base != end; op_base++) { PADDLE_ENFORCE_EQ( op_base->Type() != "py_layer", true, platform::errors::PreconditionNotMet( "Note: Currently PyLayer is not supported in DataParallel. For " "using PyLayer in a DataParallel model, you can skip gradient " "synchronization among multiple cards by 'no_sync', and " "manually implement 'all_reduce' before model optimization. " "There is an example showing specific implemetation processing " "in offical docs: https://www.paddlepaddle.org.cn/documentation" "/docs/api/paddle/DataParallel_cn.html")); } ++node_deps_[grad_pending_node.get()]; if (visited.count(grad_pending_node.get()) == 0) { visited.insert(grad_pending_node.get()); q.push(grad_pending_node.get()); } } } } void Reducer::TraverseBackwardGraph( const std::vector> &outputs) { node_deps_.clear(); std::queue> q; std::unordered_set var_visited; std::unordered_set init_nodes; for (const auto &output : outputs) { const auto &grad_node = output->GradVarBase()->GradNode(); if (grad_node == nullptr || output->OverridedStopGradient()) { VLOG(3) << "Skip auto grad since there is no grad op or output is " "stop_gradient=True: " << output->Name(); continue; } else { init_nodes.insert(grad_node.get()); var_visited.insert(output->SharedVar().get()); q.push(grad_node); } } PrepareDeps(init_nodes); // Traverse the autograd graph starting at the specified output while (!q.empty()) { auto cur_node = q.front(); q.pop(); for (const auto &cur_op : *cur_node) { auto &bwd_outs = cur_op.GetOutsMap(); for (const auto &pair : bwd_outs) { if (!pair.second.IsGrad()) { continue; } for (auto &var : pair.second) { if (!var || var->OverridedStopGradient()) { continue; } else { var_visited.insert(var.get()); } } } } for (const auto &grad_pending_node : cur_node->GradPendingNodes()) { PADDLE_ENFORCE_NOT_NULL(grad_pending_node, platform::errors::NotFound( "Grad pending node should not be nullptr")); auto iter = node_deps_.find(grad_pending_node.get()); if (iter == node_deps_.end()) { continue; } if (--(iter->second) == 0) { q.push(grad_pending_node); } } } for (const auto &it : var_index_map_) { if (var_visited.count(it.first) == 0) { unused_vars_.push_back(it.second); VLOG(3) << "Var[" << it.second << "] [" << it.first->Name() << "] is not used"; } } } // After each batch is calculated, the counter of each group(group.pending_) // and allreudce sequence counter(next_group_) will be cleaned up again. void Reducer::PrepareForBackward( const std::vector> &outputs) { VLOG(3) << "after forward, then reset count for backward."; grad_need_hooks_ = true; next_group_ = 0; std::for_each(groups_.begin(), groups_.end(), [](Group &group) { group.pending_ = group.variable_indices_.size(); group.sparse_contents_ = nullptr; }); // reinitialize vars_marked_ready_ for next iteration vars_marked_ready_.clear(); vars_marked_ready_.resize(vars_.size(), false); PADDLE_ENFORCE_EQ( groups_need_finalize_, false, platform::errors::PreconditionNotMet( "A serious error has occurred here. Please " "set find_unused_parameters=True to traverse backward graph " "in each step to prepare reduce in advance. If you have " "set, There may be several reasons for this error: " "1) Please note that all forward outputs derived from the module " "parameters must participate in the calculation of losses and " "subsequent gradient calculations. If not, the wrapper will hang, " "waiting for autograd to generate gradients for these parameters. " "you can use detach or stop_gradient to make the unused parameters " "detached from the autograd graph. " "2) Used multiple forwards and one backward. You may be able to wrap " "multiple forwards in a model.")); // The first var to trigger the unused parameter has_marked_unused_vars_ = false; if (find_unused_vars_once_ || find_unused_vars_each_step_) { unused_vars_.clear(); TraverseBackwardGraph(outputs); // only check once in first step find_unused_vars_once_ = false; } if (find_unused_vars_each_step_ && unused_vars_.empty()) { LOG_FIRST_N(WARNING, 1) << "All parameters are involved in the backward pass. " "It is recommended to set find_unused_parameters to False " "to improve performance. However, if unused parameters " "appear in subsequent iterative training, then an error " "will occur. Please make it clear that in the subsequent " "training, there will be no parameters that are not used " "in the backward pass, and then set find_unused_parameters"; } if (unused_vars_.size() == vars_.size()) { LOG_FIRST_N(WARNING, 1) << "There is no parameter in the device involved " "in the backward calculation. If there are " "parameters on other devices involved in the " "backward, then a serious error will occur here."; } } // Add hook function to each leaf node. When the gradient of a leaf node is // generated, if it is the sparse parameter, it will directly execute allreduce, // if it is the dense parameter, it will execute three steps: 1, // MarkDenseVarReady. Find the position of the corresponding group // through var_index, share the gradient memory and the group dense_tensors, // the group counter is reduced by 1. 2, MarkGroupReady: When the group // counter is 0, it means that allreduce can be emitted, and // concat + allreduce + split is emitted in turn according to next_group_. // 3, FinalizeBackward: after the end, synchronize each stream. void Reducer::AddDistHook(size_t var_index) { PADDLE_ENFORCE_LT(var_index, variable_locators_.size(), platform::errors::OutOfRange( "Out of bounds variable index. it must be less" "than %d, but it is %d", variable_locators_.size(), var_index)); // gradient synchronization is not required when grad_need_hooks_ is false. if (!grad_need_hooks_) { return; } VLOG(3) << "Var[" << var_index << "] [" << vars_[var_index]->GradVarBase()->Name() << "] arrived and triggered disthook"; local_used_vars_[var_index] = 1; // rebuild group when find_unused_vars_each_step_ is false if (NeedRebuildGroup()) { rebuild_vars_.push_back(vars_[var_index]); rebuild_var_indices_.push_back(var_index); } if (!has_marked_unused_vars_) { has_marked_unused_vars_ = true; for (const auto &unused_index : unused_vars_) { MarkVarReady(unused_index, false); } } MarkVarReady(var_index, true); } void Reducer::MarkVarReady(const size_t var_index, const bool is_used_var) { groups_need_finalize_ = true; const auto &var_locator = variable_locators_[var_index]; const auto group_index = var_locator.group_index; auto &group = groups_[group_index]; // error happened, if the var is ready before. if (vars_marked_ready_[var_index]) { auto error_info = string::Sprintf( "Error happened, when parameter[%d][%s] has been ready before. " "Please set find_unused_parameters=True to traverse backward graph " "in each step to prepare reduce in advance. If you have set, " "there may be several reasons for this error: " "1) In multiple reentrant backward phase, some parameters are reused." "2) Using model parameters outside of forward function. Please " "make sure that model parameters are not shared in concurrent " "forward-backward passes.", var_index, vars_[var_index]->GradVarBase()->Name()); PADDLE_ENFORCE_EQ(has_marked_unused_vars_, false, platform::errors::PreconditionNotMet(error_info)); error_info += "3) Unused parameters retrieval is incorrect. " "The return value of forward will be used to retrieve" " the unused parameters of the entire model. These " "gradients of unused parameters will not be synchronized " "between multiple cards. However, if the unused " "parameters participate in the backward calculation " "again at a later time (e.g. after the forward function, " "the loss calculation uses the unused " "paramters of the forward and trigger backward), " "its gradient will be wrong."; PADDLE_ENFORCE_EQ(has_marked_unused_vars_, true, platform::errors::PreconditionNotMet(error_info)); } else { vars_marked_ready_[var_index] = true; } if (!group.is_sparse_) { // process dense group const auto inside_group_index = var_locator.inside_group_index; const auto length = group.length_[inside_group_index]; auto &group_tensor = group.dense_tensors_[inside_group_index]; if (is_used_var) { auto var_base = vars_[var_index]->GradVarBase(); auto tensor = var_base->MutableVar()->GetMutable(); group_tensor.ShareDataWith(*tensor).Resize( {static_cast(length)}); } else { // TODO(shenliang03): maybe save the memory // by avoiding tensor construction if (!group_tensor.IsInitialized()) { group_tensor.Resize({static_cast(length)}); group_tensor.mutable_data(place_, framework::TransToPhiDataType(group.dtype_)); } #ifdef PADDLE_WITH_XPU_BKCL if (platform::is_xpu_place(group_tensor.place())) { auto dev_ctx = static_cast( platform::DeviceContextPool::Instance().Get(place_)); if (HasGrad(var_index)) { auto var_base = vars_[var_index]->GradVarBase(); auto tensor = var_base->MutableVar()->GetMutable(); group_tensor.ShareDataWith(*tensor).Resize( {static_cast(length)}); } else { group_tensor.Resize({static_cast(length)}); int r = xpu::constant(dev_ctx->x_context(), reinterpret_cast(group_tensor.data()), group_tensor.numel(), 0.0f); PADDLE_ENFORCE_XDNN_SUCCESS(r, "constant"); PADDLE_ENFORCE_XPU_SUCCESS(xpu_wait(dev_ctx->stream())); } } #elif defined(PADDLE_WITH_CNCL) if (platform::is_mlu_place(group_tensor.place())) { // TODO(liuyuhui) support MLU set constant VLOG(3) << "MLU doesn't support set_constant"; } #else auto *dev_ctx = platform::DeviceContextPool::Instance().Get(place_); if (HasGrad(var_index)) { auto var_base = vars_[var_index]->GradVarBase(); auto tensor = var_base->MutableVar()->GetMutable(); group_tensor.ShareDataWith(*tensor).Resize( {static_cast(length)}); } else { group_tensor.Resize({static_cast(length)}); phi::funcs::set_constant(*dev_ctx, &group_tensor, 0.0); } #endif } } else { // process sparse group PADDLE_ENFORCE_EQ( HasGrad(var_index), true, platform::errors::PreconditionNotMet( "The sparse parameter[%d][%s] should have gradient. " "Currently, DataParallel does not support sparse " "parameters without generating gradients during training. " "For example, if is_sparese=True is used in Embedding, " "the current step of this parameter cannot generate gradient " "because of stop_gradient/detatch, where error will occur.", var_index, vars_[var_index]->Name())); auto var_base = vars_[var_index]->GradVarBase(); // need to check tensor type PADDLE_ENFORCE_EQ( var_base->Var().IsType(), true, platform::errors::PreconditionNotMet( "The sparse parameter[%d][%s] must have a selectedrows gradient. " "Before forward pass, the parameter type is inferred to be " "SelectedRows, but after backward pass, its actual type becomes " "LodTensor. It is currently not supported by DataParallel. " "For example, if sparse embedding is used, and the weight of " "embedding is shared with subsequent dense parameters, then " "the parameter gradient of the embedding will be converted " "to dense parameters.", var_index, vars_[var_index]->Name())); group.sparse_contents_ = var_base->MutableVar(); } if (--group.pending_ == 0) { // can start allreduce MarkGroupReady(group_index); } if (next_group_ == groups_.size()) { FinalizeBackward(); } } // TODO(liuyuhui): If BKCL support non-blocking communication, it should be // fixed as same as multi gpus card training. void Reducer::MarkGroupReady(size_t group_index) { PADDLE_ENFORCE_GE( group_index, next_group_, platform::errors::PreconditionNotMet( "The index of the incoming group must be greater " "than or equal to the previously synchronized group index, " "expect it to greater than or equal to %d, but got %d.", next_group_, group_index)); if (group_index > next_group_) { VLOG(3) << "It will adjust the order of group in next batch automatically"; return; } for (; next_group_ < groups_.size() && groups_[next_group_].pending_ == 0; ++next_group_) { UNUSED auto &group = groups_[next_group_]; UNUSED const int run_order = next_group_ % nrings_; auto *tensor = group.dense_contents_.GetMutable(); tensor->Resize(phi::make_ddim({group.all_length_})) .mutable_data(place_, framework::TransToPhiDataType(group.dtype_)); // For CUDA or XPU, compute_stream --> comm_stream. // For CPU, do nothing. // NOTE. Because concat uses the comm_stream, // so we expose WaitCompute() interface and call // it here. parallel_ctx_->WaitCompute(run_order); FusedAllReduceSchedule(run_order, group, next_group_); } } void Reducer::FusedAllReduceSchedule(const int run_order, Group &group, const int curr_group_index) { // The overall timeline: concat > div_nranks > allreduce > split // dev_context is used to select different stream const auto &dev_context = *parallel_ctx_->GetDeviceContext(run_order); if (group.is_sparse_) { VLOG(3) << "sparse group [" << curr_group_index << "] start allreduce in ring[" << run_order << "]"; group.DivNRanks(dev_context, nranks_); parallel_ctx_->AllReduceByStream( *group.sparse_contents_, group.sparse_contents_, run_order, false); } else { VLOG(3) << "dense group [" << curr_group_index << "] start allreduce in ring[" << run_order << "]"; // Select common commstream to concat tensors // group.dense_tensors ---> group.dense_contents_ group.ConcatTensors(dev_context); group.DivNRanks(dev_context, nranks_); // Start allreduce parallel_ctx_->AllReduceByStream( group.dense_contents_, &(group.dense_contents_), run_order, false); // Select communication stream to split tensors // group.dense_contents_ ---> group.dense_tensors group.SplitTensors(dev_context); } } std::vector> Reducer::RebuildGruops() { VLOG(3) << "The order of parameter arrival: " << string::join_strings(rebuild_var_indices_, ','); PADDLE_ENFORCE_EQ( rebuild_vars_.size(), vars_.size(), platform::errors::PreconditionNotMet( "Rebuild vars's number should be equal to original vars'number, " "expect it to be %d, but got %d.", vars_.size(), rebuild_vars_.size())); std::reverse(rebuild_vars_.begin(), rebuild_vars_.end()); std::reverse(rebuild_var_indices_.begin(), rebuild_var_indices_.end()); auto rebuild_group_indices = AssignGroupBySize(rebuild_vars_, is_sparse_gradient_, group_size_limits_, rebuild_var_indices_); has_rebuilt_group_ = true; rebuild_vars_.clear(); rebuild_var_indices_.clear(); std::reverse(rebuild_group_indices.begin(), rebuild_group_indices.end()); return rebuild_group_indices; } void Reducer::ProcessUnusedDenseVars() { // The calculation stream must be used here to // avoid conflicts with communication. VLOG(3) << "Local used vars : " << string::join_strings(local_used_vars_, ','); const auto *dev_ctx = platform::DeviceContextPool::Instance().Get(place_); // H2D is to allreduce the local_used_vars_ auto *global_used_tensor = global_used_vars_.GetMutable(); framework::TensorFromVector( local_used_vars_, *dev_ctx, global_used_tensor); parallel_ctx_->AllReduceByStream( global_used_vars_, &global_used_vars_, 0, true); framework::TensorToVector( *global_used_tensor, *dev_ctx, &local_used_vars_); // sync compute stream to get global used var message, // but maybe affect speed performance parallel_ctx_->SynchronizeCompute(); VLOG(3) << "Global used vars : " << string::join_strings(local_used_vars_, ','); for (const auto var_index : unused_vars_) { const bool global_unused = (local_used_vars_[var_index] == 0); // global used but local unused, set grad VLOG(3) << "Var [" << var_index << "] [" << vars_[var_index]->Name() << "] global_unused:" << global_unused << " has grad: " << HasGrad(var_index); if (!global_unused) { VLOG(3) << "Start process unused Var"; // 1. source var base const auto &var_locator = variable_locators_[var_index]; const auto group_index = var_locator.group_index; const auto &group = groups_[group_index]; const auto inside_group_index = var_locator.inside_group_index; const auto &src_tensor = group.dense_tensors_[inside_group_index]; // sparse no need to check and no support find_unused_parameters if (group.is_sparse_) { continue; } // 2. destination var base auto dest_var_base = vars_[var_index]; auto *dest_tensor = dest_var_base->MutableVar()->GetMutable(); const auto &dest_dims = dest_tensor->dims(); // 3. create grad var base or get grad var base auto grad_var_base_tmp = dest_var_base->MutableGradVarBase(); // NOTE(haohongxiang): Calling SetIsEmpty here is to make sure that // gradient accumulation can continue normally after clear_gradients() // especiall in cases including complex control flow. grad_var_base_tmp->SharedVar()->SetIsEmpty(false); // 4. set grad tensor auto *dest_grad_tensor = grad_var_base_tmp->MutableVar()->GetMutable(); const auto *dev_ctx = platform::DeviceContextPool::Instance().Get(place_); paddle::framework::TensorCopy( src_tensor, place_, *dev_ctx, dest_grad_tensor); dest_grad_tensor->Resize(dest_dims); } } } bool Reducer::HasGrad(size_t var_index) { const auto grad_var = vars_[var_index]->GradVarBase(); if (!grad_var || !grad_var->Var().IsInitialized()) { return false; } const auto &var = grad_var->Var(); if (var.IsType()) { if (var.Get().IsInitialized()) { return true; } } else if (var.IsType()) { if (var.Get().value().IsInitialized()) { return true; } } else { PADDLE_THROW(platform::errors::PermissionDenied( "Only support LoDTensor and SelectedRows for gradient var")); } return false; } void Reducer::FinalizeBackward() { groups_need_finalize_ = false; grad_need_hooks_ = false; // Must prevent compute_stream_ starting until all comm streams have finished for (int i = 0; i < nrings_; ++i) { parallel_ctx_->WaitComm(i); } for (auto &group : groups_) { if (!group.is_sparse_) { group.dense_contents_.Clear(); } } if (NeedRebuildGroup()) { VLOG(3) << "Start rebuilding the groups"; auto rebuild_group_indices = RebuildGruops(); group_indices_ = std::move(rebuild_group_indices); InitializeGroups(group_indices_); } if (find_unused_vars_each_step_) { // TODO(liuyuhui) support xpu about Tensorcopy/TensorFromVector/TensorToVector #if defined(PADDLE_WITH_NCCL) || defined(PADDLE_WITH_RCCL) || \ defined(PADDLE_WITH_GLOO) || defined(PADDLE_WITH_ASCEND_CL) || \ defined(PADDLE_WITH_CNCL) ProcessUnusedDenseVars(); #endif // Initialize local used vars local_used_vars_.clear(); local_used_vars_.resize(vars_.size(), 0); VLOG(3) << "ProcessUnusedDenseVars is finished."; } VLOG(3) << "In the batch, Reducer is finished."; } // According to the size of each parameter, it is allocated to different groups. // The sparse parameter occupies a group exclusively. The dense parameters of // the same data type are assigned to the same group. When dividing groups, the // size of each group will be limited according to each value in // group_size_limits in turn. When it is not enough, it will be divided // by the last value of group_size_limits. The limit value is 0, which // means that the parameter will monopolize the group. std::vector> AssignGroupBySize( const std::vector> &vars, const std::vector &is_sparse_gradient, const std::vector &group_size_limits, const std::vector &tensor_indices) { PADDLE_ENFORCE_EQ(vars.size(), is_sparse_gradient.size(), platform::errors::PreconditionNotMet( "vars len must be equal to is_sparse_gradient len, but " "[%lu] != [%lu]", vars.size(), is_sparse_gradient.size())); auto check_perm = [](const std::vector &x) -> bool { size_t len = x.size(); std::vector cnt(len, 0); for (size_t i = 0; i < len; ++i) { if (x[i] >= static_cast(len) || x[i] < 0 || cnt[x[i]]) { return false; } cnt[x[i]]++; } return true; }; PADDLE_ENFORCE_EQ(true, check_perm(tensor_indices), platform::errors::PreconditionNotMet( "tensor_indices must be a permutation from 0 to %lu", tensor_indices.size())); // the return vector std::vector> res; // Key: the var type // Value: should use which index in group_size_limits for group size limit std::unordered_map group_limit_index; // Key: the var type // Value: std::unordered_map, size_t>> next_group; for (size_t i = 0; i < vars.size(); ++i) { const auto &var = vars[i]; size_t tensor_real_index = i; if (!tensor_indices.empty()) { tensor_real_index = tensor_indices[i]; } if (is_sparse_gradient[tensor_real_index]) { // we keep sparse var a single group res.push_back({tensor_real_index}); continue; } const auto &var_dtype = var->DataType(); const auto var_dtype_str = framework::DataTypeToString(var_dtype); VLOG(3) << "var[" << var->GradVarName() << "] 's type is " << var->DataType(); auto &group_info = next_group[var_dtype_str]; int64_t var_size = -1; if (var->Var().IsType()) { var_size = var->Var().Get().numel(); } else { VLOG(3) << "var " << var->Name() << " is not tensor or selected_rows, so skip it"; continue; } group_info.first.push_back(tensor_real_index); group_info.second += framework::SizeOfType(var_dtype) * var_size; if (group_limit_index.find(var_dtype_str) == group_limit_index.end()) { // means it is the first var of var_dtype group_limit_index[var_dtype_str] = 0; } auto &cur_limit_index = group_limit_index[var_dtype_str]; if (group_info.second >= group_size_limits[cur_limit_index]) { // exceed group capacity and create a new group res.emplace_back(std::move(group_info.first)); group_info = std::pair, size_t>(); cur_limit_index = (std::min)(cur_limit_index + 1, group_size_limits.size() - 1); } } // add the final groups for (auto &e : next_group) { auto &group_info = e.second; if (!group_info.first.empty()) { res.emplace_back(std::move(group_info.first)); } } for (const auto &group_index : res) { PADDLE_ENFORCE_NE( group_index.empty(), true, platform::errors::PreconditionNotMet( "AssignGroupBySize construct empty group, please check.")); } if (tensor_indices.empty()) { std::sort(res.begin(), res.end(), [](const std::vector &x, const std::vector &y) { return x.front() < y.front(); }); } return res; } #endif } // namespace imperative } // namespace paddle