# Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. from .proto import framework_pb2 from paddle.fluid import framework as framework from paddle.fluid import program_guard from . import core import collections import copy import logging from . import unique_name from . import log_helper import paddle.fluid from .data_feeder import check_type import warnings try: from collections.abc import Sequence except: from collections import Sequence __all__ = [ 'append_backward', 'gradients', ] _logger = log_helper.get_logger( __name__, logging.INFO, fmt='%(asctime)s-%(levelname)s: %(message)s' ) class ProgramStats(object): def __init__(self, block, ops): self.block = block self.ops = ops self.op_deps = {} # op-> in_ops, out_ops self.var_op_deps = {} # var as input op, var as output op def get_input_nodes(self): input_names = [] for name in self.var_op_deps: if ( len(self.var_op_deps[name]["var_as_output_ops"]) == 0 and len(self.var_op_deps[name]["var_as_input_ops"]) > 0 ): if self.block.var(name).persistable: continue input_names.append(name) for op in self.ops: if op.desc.type() == "read": input_names.extend(op.desc.output_arg_names()) return input_names def get_reserved_vars(self): var_name = [] for op in self.ops: if op.desc.type() == "seed": var_name.extend(op.desc.output_arg_names()) return var_name def get_out_of_subgraph_vars(self, begin_op_idx, end_op_idx): var_name = [] for i in range(begin_op_idx, end_op_idx, 1): for name in self.ops[i].desc.output_arg_names(): if name in self.var_op_deps: for idx in self.var_op_deps[name]["var_as_input_ops"]: if idx >= end_op_idx: var_name.append(name) for name in self.ops[i].desc.input_arg_names(): if name in self.var_op_deps: for idx in self.var_op_deps[name]["var_as_output_ops"]: if idx < begin_op_idx: var_name.append(name) return var_name def is_subgraph(self, var_group1, var_group2): # should traverse from var_group1 to var_group2 # max op idx in var_group2 # min op idx in var_group1 min_op_idx = len(self.ops) max_op_idx = -1 for name in var_group1: if name not in self.var_op_deps: return False, min_op_idx, max_op_idx for name in var_group2: if name not in self.var_op_deps: return False, min_op_idx, max_op_idx for name in var_group1: op_idx = self.var_op_deps[name]["var_as_input_ops"] for idx in op_idx: min_op_idx = min(min_op_idx, idx) for name in var_group2: op_idx = self.var_op_deps[name]["var_as_output_ops"] for idx in op_idx: max_op_idx = max(max_op_idx, idx) if min_op_idx >= max_op_idx: return False, min_op_idx, max_op_idx return True, min_op_idx, max_op_idx def _update_segment_start(self, min_idx, pre_segment_end_idx): """ persist vars of amp-related cast should be included in recompute segment """ def is_amp_cast(op): return ( op.desc.type() == 'cast' and self.block.var(op.desc.input_arg_names()[0]).persistable ) idx_ = min_idx - 1 updated_min_idx = min_idx while idx_ > pre_segment_end_idx: if is_amp_cast(self.ops[idx_]): _logger.info( "found amp-cast op: {}, : {}".format( self.ops[idx_].desc.type(), self.ops[idx_].desc.input_arg_names()[0], ) ) updated_min_idx = idx_ idx_ -= 1 else: break return updated_min_idx def build_stats(self): for i, op in enumerate(self.ops): self.op_deps[i] = {"in_ops": [], "out_ops": []} for j, name in enumerate(op.desc.input_arg_names()): if name in self.var_op_deps: self.op_deps[i]["in_ops"].extend( self.var_op_deps[name]["var_as_output_ops"] ) for j, name in enumerate(op.desc.input_arg_names()): if name in self.var_op_deps: self.var_op_deps[name]["var_as_input_ops"].extend([i]) else: self.var_op_deps[name] = {} self.var_op_deps[name]["var_as_input_ops"] = [i] self.var_op_deps[name]["var_as_output_ops"] = [] for j, name in enumerate(op.desc.output_arg_names()): if name in self.var_op_deps: self.var_op_deps[name]["var_as_output_ops"].extend([i]) else: self.var_op_deps[name] = {} self.var_op_deps[name]["var_as_input_ops"] = [] self.var_op_deps[name]["var_as_output_ops"] = [i] for op_idx in self.op_deps[i]["in_ops"]: self.op_deps[op_idx]["out_ops"].extend([i]) def sort_checkpoints(self, checkpoints_name): sorted_checkpoints = [] for name in checkpoints_name: if name not in self.var_op_deps: _logger.info( "Recompute Optimizer: deleted %s from checkpoints, because it is not used in paddle program." % name ) elif self.var_op_deps[name]["var_as_output_ops"] == []: # input nodes sorted_checkpoints.append((name, -1)) else: sorted_checkpoints.append( (name, max(self.var_op_deps[name]["var_as_output_ops"])) ) sorted_checkpoints = sorted(sorted_checkpoints, key=lambda x: x[1]) return [x[0] for x in sorted_checkpoints] def modify_forward_desc_for_recompute(self): op_types = [op.desc.type() for op in self.ops] if "dropout" not in op_types: return op_idx = 0 while op_idx < len(self.ops): op = self.ops[op_idx] if op.desc.type() != "dropout": op_idx += 1 continue # already insert seed op before dropout if op.input('Seed') is not None and len(op.input('Seed')) == 1: op_idx += 1 continue # add a seed op so that the two dropout op can generate same output op_unique_name = unique_name.generate("seed") var_unique_name = unique_name.generate_with_ignorable_key( ".".join([op_unique_name, 'tmp']) ) added_var = self.block.create_var( name=var_unique_name, dtype='int32', type=core.VarDesc.VarType.LOD_TENSOR, persistable=False, stop_gradient=False, ) seed = 0 if op.attr("fix_seed") is False else int(op.attr("seed")) op_device_attr_name = ( core.op_proto_and_checker_maker.kOpDeviceAttrName() ) op_device = "" if op.desc.has_attr(op_device_attr_name): op_device = op.desc.attr(op_device_attr_name) # Setting the force_cpu of seed to true will make the output of seed in cpu memory, # reduce the synchronous copy from GPU to CPU in dropout, and reduce the communication hang added_op = self.block._insert_op( index=op.idx, type='seed', inputs={}, outputs={'Out': [added_var]}, attrs={'seed': seed, 'op_device': op_device, 'force_cpu': True}, ) self.ops.insert(op_idx, added_op) # modify dropout op desc so that it accept a seed var as input op.desc.set_input("Seed", [var_unique_name]) op.desc.remove_attr("fix_seed") op.desc.remove_attr("seed") self.block._sync_with_cpp() op_idx += 2 def _pretty_op_desc_(op_desc, prefix): out_s = "%s\tname:[%s]\n%s \tinputs:[%s]\n%s \toutputs:[%s]" % ( prefix + "_op", str(op_desc.type()), prefix + "_input", " ".join(op_desc.input_arg_names()), prefix + "_output", " ".join(op_desc.output_arg_names()), ) return out_s def _add_needed_descs_to_block( descs, block, main_block, in_memory_vars, grad_op_id_to_fwd_op=None ): if len(descs) == 0: return [] result_descs = [] op_role_attr_name = core.op_proto_and_checker_maker.kOpRoleAttrName() backward = core.op_proto_and_checker_maker.OpRole.Backward for desc in descs: origin_desc = desc origin_is_operator = False if isinstance(desc, framework.Operator): desc = desc.desc origin_is_operator = True if isinstance(desc, tuple): desc = desc[0] is_needed = False for name in desc.output_arg_names(): if main_block.has_var(name) and main_block.var(name).persistable: continue if name not in in_memory_vars: is_needed = True if is_needed: if origin_is_operator and grad_op_id_to_fwd_op is not None: grad_op_id_to_fwd_op[desc.original_id()] = origin_desc new_op_desc = block.desc.append_op() new_op_desc.copy_from(desc) new_op_desc._set_attr(op_role_attr_name, backward) if desc.has_attr('op_device'): new_op_desc._set_attr('op_device', desc.attr('op_device')) result_descs.append(new_op_desc) return result_descs def _add_descs_to_block(descs, block, grad_op_id_to_fwd_op=None): if len(descs) == 0: return [] result_descs = [] op_role_attr_name = core.op_proto_and_checker_maker.kOpRoleAttrName() backward = core.op_proto_and_checker_maker.OpRole.Backward for desc in descs: if isinstance(desc, framework.Operator): # for recompute, should record recompute ops if grad_op_id_to_fwd_op is not None: grad_op_id_to_fwd_op[desc.desc.original_id()] = desc desc = desc.desc if isinstance(desc, tuple): desc = desc[0] new_op_desc = block.desc.append_op() new_op_desc.copy_from(desc) new_op_desc._set_attr(op_role_attr_name, backward) if desc.has_attr('op_device'): new_op_desc._set_attr('op_device', desc.attr('op_device')) result_descs.append(new_op_desc) return result_descs def _find_loss_op_(loss): for op in reversed(loss.block.ops): assert isinstance(op, framework.Operator) if ( len(op.output_arg_names) == 1 and op.output_arg_names[0] == loss.name ): loss.op = op break if loss.op is None: raise ValueError("loss.op is None. Should not happend") def _rename_arg_(op_descs, old_name, new_name, begin_idx=None, end_idx=None): """ Traverse all ops in op_descs[begin_idx : end_idx], if any op has inputs/outputs named "old_name", rename it as 'new_name' """ if begin_idx is None: begin_idx = 0 if end_idx is None: end_idx = len(op_descs) if isinstance(op_descs, (list, tuple)): for i in range(begin_idx, end_idx): op_desc = op_descs[i] if isinstance(op_desc, tuple): op_desc = op_desc[0] op_desc._rename_input(old_name, new_name) op_desc._rename_output(old_name, new_name) if isinstance(op_descs, collections.OrderedDict): for key, value in op_descs.items(): if isinstance(value, (list, tuple)): for op_desc in value: op_desc._rename_input(old_name, new_name) op_desc._rename_output(old_name, new_name) def _create_op_desc_(op_type, inputs, outputs, attrs): """ Create a C++ OpDesc object with specified inputs, outputs and attributes. """ op_desc = core.OpDesc() op_desc.set_type(op_type) for para, args in inputs.items(): op_desc.set_input( para, list( map( lambda arg: arg.decode() if isinstance(arg, bytes) else arg, args, ) ), ) for para, args in outputs.items(): op_desc.set_output( para, list( map( lambda arg: arg.decode() if isinstance(arg, bytes) else arg, args, ) ), ) op_role_attr_name = core.op_proto_and_checker_maker.kOpRoleAttrName() op_device_attr_name = core.op_proto_and_checker_maker.kOpDeviceAttrName() if op_role_attr_name not in attrs: attrs[ op_role_attr_name ] = core.op_proto_and_checker_maker.OpRole.Backward if op_device_attr_name not in attrs: attrs[op_device_attr_name] = "" for name, val in attrs.items(): if isinstance(val, framework.Block): op_desc.set_block_attr(name, val.desc) else: op_desc._set_attr(name, val) return op_desc def _create_loss_op_desc_(loss): op_desc = _create_op_desc_( "fill_constant", {}, {"Out": [_append_grad_suffix_(loss.name)]}, { "shape": [1], "value": 1.0, "dtype": loss.dtype, "force_cpu": False, core.op_proto_and_checker_maker.kOpRoleAttrName(): int( core.op_proto_and_checker_maker.OpRole.Backward ) | int(core.op_proto_and_checker_maker.OpRole.Loss), core.op_proto_and_checker_maker.kOpDeviceAttrName(): loss.op.attr( core.op_proto_and_checker_maker.kOpDeviceAttrName() ), }, ) return op_desc def _infer_var_data_type_shape_(grad_var_name, block): """ Infer the data type and shape of given grad variable """ grad_var = block.desc.find_var(grad_var_name.encode()) fwd_name = _strip_grad_suffix_(grad_var_name) if block.desc.has_var_recursive(fwd_name.encode()): fwd_var = block.desc.find_var_recursive(fwd_name.encode()) grad_var.set_dtype(fwd_var.dtype()) grad_var.set_shape(fwd_var.shape()) else: # TODO(jiabin): Maybe we should not to this to cause some unexpected error on dtype warnings.warn( "Set grad var: {} dtype to default FP32, since we can't find its related forward var".format( grad_var_name ) ) grad_var.set_dtype(core.VarDesc.VarType.FP32) def _all_in_set_(cands, s): """ Test if all elements of 'cands' are in set 's' """ if len(cands) == 0: return False for c in cands: if not c in s: return False return True def _some_in_set_(cands, s): """ Test if some elements of 'cands' are in set 's' """ if len(cands) == 0: return False for c in cands: if c in s: return True return False def _strip_grad_suffix_(name): """ Strip the grad suffix from the given variable name e.g. x@GRAD ==> x y@GRAD@RENAME@1 ==> y """ pos = name.find(core.grad_var_suffix()) new_name = name[:pos] if pos != -1 else name new_pos = name.rfind('grad/') return new_name[new_pos + 5 :] if new_pos != -1 else new_name def _append_grad_suffix_(name): """ Append grad suffix to the given variable name e.g. x ==> x@GRAD """ return name + core.grad_var_suffix() def _accumulate_gradients_by_sum_op_( var_name, renamed_vars, pending_sum_ops, op_idx, op_device="" ): """ Use sum op to accumulate_gradients, the gradients are stored in renamed_vars. """ if op_idx not in pending_sum_ops.keys(): pending_sum_ops[op_idx] = [] pending_sum_ops[op_idx].append( _create_op_desc_( "sum", {"X": renamed_vars[var_name]}, {"Out": [var_name]}, {"use_mkldnn": False, "op_device": op_device}, ) ) renamed_vars[var_name] = [var_name] def _accumulate_gradients_by_add_ops_( var_name, renamed_vars, pending_sum_ops, op_idx, op_device="" ): """ Use several inplace add op to accumulate_gradients, the gradients are stored in renamed_vars. """ if op_idx not in pending_sum_ops.keys(): pending_sum_ops[op_idx] = [] out_name = renamed_vars[var_name][0] for i in range(1, len(renamed_vars[var_name])): x_name = out_name y_name = renamed_vars[var_name][i] if i != len(renamed_vars[var_name]) - 1: out_name = var_name + '@ADD@' + str(i) else: out_name = var_name pending_sum_ops[op_idx].append( _create_op_desc_( "grad_add", {"X": [x_name], "Y": [y_name]}, {"Out": [out_name]}, {"use_mkldnn": False, "op_device": op_device}, ) ) renamed_vars[var_name] = [var_name] def _addup_repetitive_outputs_( op_descs, block_idx, grad_var_to_var=None, grad_op_id_to_fwd_op=None ): """ In backward part, an variable may be the output of more than one ops. And one op may yield its multiple outputs to the same variable. In these cases, the variable should be the accumulation of all the outputs. `sum_op`s are added to implement the accumulate. Args: grad_var_to_var(dict): used to build the mapping between grad var name and forward var name. Only for auto parallel. """ _MAX_ADD_NUM_ = framework._global_flags()['FLAGS_max_inplace_grad_add'] # pending_sum_ops = [] pending_sum_ops = collections.OrderedDict() var_rename_count = collections.defaultdict(int) renamed_vars = collections.defaultdict(list) renamed_var_start_idx = collections.defaultdict(list) var_device = collections.defaultdict(str) for idx, op_desc in enumerate(op_descs): op_device_attr_name = ( core.op_proto_and_checker_maker.kOpDeviceAttrName() ) op_device = "" if op_desc.has_attr(op_device_attr_name): op_device = op_desc.attr(op_device_attr_name) for var_name in op_desc.input_arg_names(): if "@GRAD" not in var_name: continue if len(renamed_vars[var_name]) > 1: if len(renamed_vars[var_name]) > _MAX_ADD_NUM_: _accumulate_gradients_by_sum_op_( var_name, renamed_vars, pending_sum_ops, idx, var_device[var_name], ) else: _accumulate_gradients_by_add_ops_( var_name, renamed_vars, pending_sum_ops, idx, var_device[var_name], ) for param_idx, param_name in enumerate(op_desc.output_names()): arg_names = op_desc.output(param_name) for arg_idx, var_name in enumerate(arg_names): if "@GRAD" not in var_name: continue # if "@RENAME@" in var_name: # continue if ( var_name == core.empty_var_name() or var_name in op_desc.input_arg_names() ): # empty variable or inplace op continue if len(renamed_vars[var_name]) == 0: # it's the first time we get the variable renamed_vars[var_name] = [var_name] renamed_var_start_idx[var_name] = idx else: if len(renamed_vars[var_name]) == 1: new_name = ( var_name + "@RENAME@block" + str(block_idx) + "@" + str(var_rename_count[var_name]) ) var_rename_count[var_name] += 1 # Build the mapping between the new_name and var_name (Only for auto parallel) if grad_var_to_var is not None: if var_name in grad_var_to_var: grad_var_to_var[new_name] = grad_var_to_var[ var_name ] else: grad_var_to_var[new_name] = var_name # rename original var_name renamed_vars[var_name][0] = new_name # before change: _rename_arg_(op_descs, var_name, # new_name, 0, idx) # rename arg from idx of the first appearance # in backward, not always from 0 _rename_arg_( op_descs, var_name, new_name, renamed_var_start_idx[var_name], idx, ) _rename_arg_(pending_sum_ops, var_name, new_name) for p in op_desc.output_names()[:param_idx]: p_arg_names = op_desc.output(p) if var_name in p_arg_names: op_desc.set_output( p, [ new_name if x == var_name else x for x in p_arg_names ], ) arg_names = [ new_name if x == var_name else x for x in arg_names[:arg_idx] ] + arg_names[arg_idx:] new_name = ( var_name + "@RENAME@block" + str(block_idx) + "@" + str(var_rename_count[var_name]) ) var_rename_count[var_name] += 1 # Build the mapping between the new_name and var_name (Only for auto parallel) if grad_var_to_var is not None: if var_name in grad_var_to_var: grad_var_to_var[new_name] = grad_var_to_var[ var_name ] else: grad_var_to_var[new_name] = var_name arg_names[arg_idx] = new_name op_desc.set_output(param_name, arg_names) renamed_vars[var_name].append(new_name) # record the latest device var_device[var_name] = op_device for var_name, inputs in renamed_vars.items(): if len(renamed_vars[var_name]) > 1: if len(renamed_vars[var_name]) > _MAX_ADD_NUM_: _accumulate_gradients_by_sum_op_( var_name, renamed_vars, pending_sum_ops, len(op_descs), var_device[var_name], ) else: _accumulate_gradients_by_add_ops_( var_name, renamed_vars, pending_sum_ops, len(op_descs), var_device[var_name], ) op_descs_len = len(op_descs) # sum_op descs are sorted according to their insert position for key, value in collections.OrderedDict( reversed(list(pending_sum_ops.items())) ).items(): # NOTE(zhiqiu): Since reversed, the idx of op_descs to be inserted will remains correct. # For example, [0, 1, 2], and we want to insert 'a' at idx 1, 'b' at idx 2, and the expected result is [0, 1, 'a', 2, 'b']. # If reversed, we first insert 'b' at idx 2, it becomes [0, 1, 2, 'b'], and then insert 'a' at idx 1, it becomes [0, 1, 'a', 2, 'b']. # If not reverse, we first insert 'a' at idx 1, it becomes [0, 1, 'a', 2], and then insert 'b' at idx 2, it becomes [0, 1, 'a', 'b', 2]. idx = key for i, op in enumerate(value): # update the mapping between fwd and bwd target_idx = idx - 1 if idx == op_descs_len else idx + i if ( grad_op_id_to_fwd_op is not None and grad_op_id_to_fwd_op.get( op_descs[target_idx].original_id(), None ) is not None ): grad_op_id_to_fwd_op[op.original_id()] = grad_op_id_to_fwd_op[ op_descs[target_idx].original_id() ] op_descs.insert(idx + i, op) return op_descs def _remove_no_grad_branch_( op_descs, no_grad_set, grad_op_id_to_fwd_op=None, target_vars=[] ): """ Remove unnecessary grad ops A grad op can be removed in two cases: 1. all outputs of the grad op are in 'no_grad_set' 2. all grad inputs of the grad op are in 'no_grad_set' NOTE: we will skip target_vars's grad name. """ def _op_can_be_removed_(op_desc, no_grad_set): out_arg_names = op_desc.output_arg_names() if len(out_arg_names) == 0 or _all_in_set_(out_arg_names, no_grad_set): return True if _all_in_set_( [ name for name in op_desc.input_arg_names() if name.find(core.grad_var_suffix()) != -1 ], no_grad_set, ): no_grad_set.update(set(out_arg_names) - target_grad_var_names) return True return False # Remove ops whose outputs are all in no_grad_dict target_grad_var_names = set( [var.name + core.grad_var_suffix() for var in target_vars] ) op_descs = [ op_desc for op_desc in op_descs if not _op_can_be_removed_(op_desc, no_grad_set) ] # Insert fill_any_like_op with value 0 to_insert = [] for idx, op_desc in enumerate(op_descs): for arg in op_desc.input_arg_names(): # arg is a gradient var name and arg should not have gradient if core.grad_var_suffix() in arg and arg in no_grad_set: x_in = _strip_grad_suffix_(arg) # the reason should be: arg can be input of another grad op # and the op is a not-to-remove op new_op_desc = _create_op_desc_( "fill_any_like", {"X": [x_in]}, {"Out": [arg]}, {'value': 0, 'dtype': -1}, ) # update the mapping between fwd and bwd if ( grad_op_id_to_fwd_op is not None and grad_op_id_to_fwd_op.get(op_desc.original_id(), None) is not None ): grad_op_id_to_fwd_op[ new_op_desc.original_id() ] = grad_op_id_to_fwd_op[op_desc.original_id()] to_insert.append((new_op_desc, idx)) list([op_descs.insert(p[1], p[0]) for p in reversed(to_insert)]) return op_descs def _find_not_need_ops(grad_op_descs, forward_ops, input_grad_names_set): """ Pruning Program with Structural Analysis Method of Computational Graph. The nodes of the computational graph composed of backward OPS should be interconnected. If there are unconnected sub-graphs in the computational graph, these sub-graphs should be cut off. Args: grad_op_descs(list[core.OpDesc]): The candidate backward OpDescs. forward_ops(list[Operator]): The forward ops. input_grad_names_set(set): this set is used to store the gradients' name which is generated by backward ops, and input_grad_names_set can help to prune the unnecessary backward ops. Return: (set[core.OpDesc]): A set of OpDescs which should be pruned. """ class Var(object): def __init__(self, var_name): self.var_name = var_name self.gen_op = None self.pendding_ops = [] def set_gen_op(self, gen_op): assert isinstance(gen_op, Op) assert self.gen_op is None self.gen_op = gen_op def add_pending_op(self, op): assert isinstance(op, Op) self.pendding_ops.append(op) class Op(object): def __init__(self, op_desc): self.op_desc = op_desc self.inputs = [] self.outputs = [] def insert_input(self, var): assert isinstance(var, Var) self.inputs.append(var) def insert_output(self, var): assert isinstance(var, Var) self.outputs.append(var) var_versions = dict() def _create_node(name): if name not in var_versions.keys(): var_versions[name] = [Var(name)] else: var_versions[name].append(Var(name)) return var_versions[name][-1] def _create_or_get_last_version_node(name): if name not in var_versions.keys(): var_versions[name] = [Var(name)] return var_versions[name][-1] def _create_op_node(op_desc): op_node = Op(op_desc) for input in op_desc.input_arg_names(): var = _create_or_get_last_version_node(name=input) var.add_pending_op(op_node) op_node.insert_input(var) for output in op_desc.output_arg_names(): var = _create_node(name=output) var.set_gen_op(op_node) op_node.insert_output(var) return op_node # Record the forward vars forward_vars_set = ( set() if input_grad_names_set is None else set(input_grad_names_set) ) for op in forward_ops: forward_vars_set.update(op.desc.input_arg_names()) forward_vars_set.update(op.desc.output_arg_names()) # Record the vars which are created during backward and is not generated by op. backward_vars_set = set() # special_op_nodes is the candidate sub-graph head node. special_op_nodes = set() for op_desc in grad_op_descs: input_set = set(op_desc.input_arg_names()) # The new_vars are created during backward and is not generated by op. new_vars = input_set - forward_vars_set - backward_vars_set backward_vars_set.update(op_desc.output_arg_names()) op_node = _create_op_node(op_desc) if len(new_vars) == len(input_set): special_op_nodes.add(op_node) not_need_op_descs = [] # Start traversing all candidate sub-graph headers to check whether # they are connected to backward computational graphs, and if they are # not, list them in not_need_op_descs for special_op_node in special_op_nodes: op_list = [special_op_node] ready_vars = set(special_op_node.inputs) remove_ops = True candidate_ops = [special_op_node] while len(candidate_ops) > 0: op_node = candidate_ops.pop(0) if _all_in_set_(op_node.inputs, ready_vars): for out_var in op_node.outputs: candidate_ops.extend(out_var.pendding_ops) op_list.extend(out_var.pendding_ops) ready_vars.update(op_node.outputs) else: remove_ops = False break if remove_ops: not_need_op_descs.extend([node.op_desc for node in op_list]) not_need_op_descs_set = set(not_need_op_descs) grad_op_descs_set = set(grad_op_descs) # If a backward computational graph is simply one sub-graph header, the # not_need_op_descs will be whole graph, this IF clause avoids it. if grad_op_descs_set == not_need_op_descs_set: return set() return not_need_op_descs_set def serialize_op_decs(op_desc): protostr = op_desc.serialize_to_string() proto = framework_pb2.OpDesc.FromString(bytes(protostr)) return proto.__str__() def _append_backward_ops_with_checkpoints_( block, ops, target_vars, target_block, no_grad_dict, grad_to_var, checkpoints, grad_op_id_to_fwd_op=None, ): """ Create grad ops with forward ops, and insert them into given block Args: block(Block): the block where forward ops are ops(Op): the forward operators whose forward recomputation backward ops need to be added target_vars(list[Tensor]): the loss vars we want to calculate gradient. target_block(Block): the block which is going to hold new generated grad ops no_grad_dict(dict): key(int) block index val(str): corresponding forward variable name checkpoints: variables that a user defined as checkpoint for forward recomputation Algorithms: 0) deal with forward recomputing program descs 1) find ops between checkpoints, i.e. recompute_segments 2) go through all forward ops and induct all variables that will be hold in memory a. variables that are used across segments will be held in memory b. output of dropout op will be held in memory c. input variables will be held in memory 3) go through each recompute_segments, add backward ops with forward recomputation a. add ops in current recompute_segment as forward recomputation ops b. rename all non-checkpoint variables in recomputation ops c. add backward ops of current recomputation ops d. add sum op for repetitive_outputs 4) remove no grad branch as it is in _remove_no_grad_branch_ 5) Note1: all appended ops' OpRole are Backward 6) Note2: all variables with new name should be returned so that _append_backward_vars_ can be called 7) Note3: current forward recomputation backpropagation does not handle programs with subblock """ checkpoints_name = [x.name for x in checkpoints] checkpoints_name = list(set(checkpoints_name)) local_block = block.program._create_block() buffer_block = block.program._create_block() # 0) deal with forward recomputing program descs program_stat = ProgramStats(block, ops) program_stat.modify_forward_desc_for_recompute() program_stat.build_stats() # 1) find ops between checkpoints, i.e. recompute_segments checkpoints_name = program_stat.sort_checkpoints(checkpoints_name) segments = [] if len(checkpoints_name) == 1: # only one checkpoint max_op_idx = -1 var_group = [checkpoints_name[0]] for name in var_group: if name not in program_stat.var_op_deps: break op_idx = program_stat.var_op_deps[name]["var_as_output_ops"] # only count the last generate op for idx in op_idx: max_op_idx = max(max_op_idx, idx) if max_op_idx > 0: segments.append([0, max_op_idx + 1]) else: start_idx = 0 pre_segment_end_idx = -1 while True: if start_idx >= len(checkpoints_name) - 1: break # min_idx: checkpoint_1' s input op # max_idx: checkpoint_2' s output op flag, min_idx, max_idx = program_stat.is_subgraph( [checkpoints_name[start_idx]], [checkpoints_name[start_idx + 1]] ) if flag: # max_idx + 1 since the exact and used segment end idx is max_idx min_idx = program_stat._update_segment_start( min_idx, pre_segment_end_idx ) segments.append([min_idx, max_idx + 1]) else: _logger.info( "Could not recompute op range [{}] - [{}] ".format( min_idx, max_idx + 1 ) ) start_idx += 1 if segments != [] and segments[0][0] != 0: recompute_segments = [[0, segments[0][0]]] + segments else: recompute_segments = segments for i, (idx1, idx2) in enumerate(recompute_segments): _logger.info("recompute segment[{}]".format(i)) _logger.info( "segment start op: [{}]: [{}]".format( ops[idx1].desc.type(), ops[idx1].desc.input_arg_names() ) ) _logger.info( "segment end op: [{}]: [{}]".format( ops[idx2 - 1].desc.type(), ops[idx2 - 1].desc.input_arg_names() ) ) _logger.info("recompute segment[{}]".format(i)) _logger.info( "segment start op: [{}]: [{}]".format( ops[idx1].desc.type(), ops[idx1].desc.input_arg_names() ) ) _logger.info( "segment end op: [{}]: [{}]".format( ops[idx2 - 1].desc.type(), ops[idx2 - 1].desc.input_arg_names() ) ) # 2) go through all forward ops and induct all variables that will be hold in memory vars_should_be_hold = [] # a. variables that are used across segments will be held in memory for segment in recompute_segments: vars_should_be_hold.extend( program_stat.get_out_of_subgraph_vars(segment[0], segment[1]) ) cross_vars = set(vars_should_be_hold) - set(checkpoints_name) _logger.info( "found [{}] vars which cross recompute segment: [{}], better checkpoints might be set to reduce those vars".format( len(cross_vars), cross_vars ) ) # b. output of seed op should be kept in memory vars_should_be_hold.extend(program_stat.get_reserved_vars()) # c. input variables are checkpoints vars_should_be_hold.extend(program_stat.get_input_nodes()) vars_should_be_hold = list(set(vars_should_be_hold)) # 3) go through each recompute_segments, add backward ops with forward recomputation grad_op_descs = [] var_name_dict = {} vars_in_memory = vars_should_be_hold + checkpoints_name max_calculated_op_position = len(ops) device_attr_name = core.op_proto_and_checker_maker.kOpDeviceAttrName() if recompute_segments == []: gap_ops = ops[0:max_calculated_op_position] for op in reversed(gap_ops): if op.has_attr("sub_block"): raise Exception( "Recompute don't support ops with sub_block" "invoke op: %s" % _pretty_op_desc_(op.desc, "with_sub_block") ) grad_op_desc, op_grad_to_var = core.get_grad_op_desc( op.desc, no_grad_dict[block.idx], [] ) # record the mapping between fwd and bwd if grad_op_id_to_fwd_op is not None: for op_desc in grad_op_desc: grad_op_id_to_fwd_op[op_desc.original_id()] = op # Set device for grad_op according to forward Op if op.desc.has_attr(device_attr_name): op_device = op.desc.attr(device_attr_name) for op_desc in grad_op_desc: op_desc._set_attr(device_attr_name, op_device) added_descs = _add_descs_to_block( grad_op_desc, local_block, grad_op_id_to_fwd_op ) grad_op_descs.extend(added_descs) grad_to_var.update(op_grad_to_var) for i, segment in enumerate(recompute_segments[::-1]): gap_ops = ops[segment[1] : max_calculated_op_position] max_calculated_op_position = segment[0] for op in reversed(gap_ops): if op.has_attr("sub_block"): raise Exception( "Recompute don't support ops with sub_block" "invoke op: %s" % _pretty_op_desc_(op.desc, "with_sub_block") ) grad_op_desc, op_grad_to_var = core.get_grad_op_desc( op.desc, no_grad_dict[block.idx], [] ) # record the mapping between fwd and bwd if grad_op_id_to_fwd_op is not None: for op_desc in grad_op_desc: grad_op_id_to_fwd_op[op_desc.original_id()] = op # Set device for grad_op according to forward Op if op.desc.has_attr(device_attr_name): op_device = op.desc.attr(device_attr_name) for op_desc in grad_op_desc: op_desc._set_attr(device_attr_name, op_device) added_descs = _add_descs_to_block( grad_op_desc, local_block, grad_op_id_to_fwd_op ) grad_op_descs.extend(added_descs) grad_to_var.update(op_grad_to_var) ff_ops = ops[segment[0] : segment[1]] var_suffix = ".subprog_%d" % i for op in ff_ops: if op.has_attr("sub_block"): raise Exception( "Recompute don't support ops with sub_block" "invoke op: %s" % _pretty_op_desc_(op.desc, "with_sub_block") ) input_and_output_names = [] input_and_output_names.extend(op.desc.input_arg_names()) input_and_output_names.extend(op.desc.output_arg_names()) for name in input_and_output_names: if block.var(name).persistable or name in checkpoints_name: continue if name in vars_should_be_hold: continue if name not in var_name_dict: var_name_dict[name] = name + var_suffix # we should create the rename var in subprog, otherwise its VarType will be BOOL ref_var = block.program.global_block().var(name) block.create_var( name=var_name_dict[name], shape=ref_var.shape, dtype=ref_var.dtype, type=ref_var.type, persistable=ref_var.persistable, stop_gradient=ref_var.stop_gradient, ) # 3.a. add ops in current recompute_segment as forward recomputation ops buffer_descs = _add_needed_descs_to_block( ff_ops, buffer_block, block, vars_in_memory, grad_op_id_to_fwd_op ) added_descs = _add_descs_to_block( ff_ops, local_block, grad_op_id_to_fwd_op ) # 3.b. rename all non-checkpoint variables in recomputation ops for key in var_name_dict: _rename_arg_(buffer_descs, key, var_name_dict[key]) # added_descs should be in grad_op_descs because it is backward op desc grad_op_descs.extend(buffer_descs) # 3.c. add backward ops for all ops in current segment for op_desc in reversed(added_descs): grad_op_desc, op_grad_to_var = core.get_grad_op_desc( op_desc, no_grad_dict[block.idx], [] ) # record the mapping between fwd and bwd if grad_op_id_to_fwd_op is not None: for g_op_desc in grad_op_desc: grad_op_id_to_fwd_op[ g_op_desc.original_id() ] = grad_op_id_to_fwd_op[op_desc.original_id()] # Set device for grad_op according to forward Op if op_desc.has_attr(device_attr_name): op_device = op_desc.attr(device_attr_name) for g_op_desc in grad_op_desc: g_op_desc._set_attr(device_attr_name, op_device) for key in var_name_dict: _rename_arg_(grad_op_desc, key, var_name_dict[key]) grad_op_descs.extend(grad_op_desc) grad_to_var.update(op_grad_to_var) # 3.d. add sum op for repetitive_outputs grad_op_descs = _addup_repetitive_outputs_( grad_op_descs, block.idx, grad_op_id_to_fwd_op=grad_op_id_to_fwd_op ) # 4) remove no grad branch as it is in _remove_no_grad_branch_ grad_op_descs = _remove_no_grad_branch_( grad_op_descs, no_grad_dict[block.idx], grad_op_id_to_fwd_op, target_vars, ) added_descs = _add_descs_to_block( grad_op_descs, target_block, grad_op_id_to_fwd_op ) return ( program_stat, checkpoints_name, vars_should_be_hold, recompute_segments, ) def _get_sub_block_path( sub_block, sub_block_op_desc, no_grad_set, op_path_dict, sub_block_target_names=None, ): """ Get output vars in subblock which will be assigned to parent block. It is used to find the grad path in subblock. Args: sub_block(Block): The sub-block in which to get op path. sub_block_op_desc: The op desc of the sub-block op such as 'while', 'conditional_block' and 'recurrent'. no_grad_set(set): The set of no grad var name. no_grad_set will be changed. op_path_dict(dict): op_path_dict will be changed. key(int) block index val(list) the op path of block(index) sub_block_target_names(set): Target var names of sub-block. Return: The forward op path of sub-block corresponding to backward op. """ assert sub_block_op_desc.has_attr( "sub_block" ) and sub_block.idx == sub_block_op_desc._block_attr_id("sub_block") assert isinstance(sub_block_target_names, (set, type(None))) if sub_block_target_names is None: sub_block_target_names = sub_block_op_desc.output_arg_names # TODO(huihuangzheng): add support for recurrent op. if sub_block_op_desc.type in ["conditional_block", "while"]: # Step1: get the output vars in sub-block sub_outputs = [ sub_block._var_recursive(var) for var in sub_block_target_names ] for var in sub_block_target_names: for op_desc in sub_block.ops: if var in op_desc.output_arg_names: for name in op_desc.input_arg_names: sub_outputs.append(sub_block._var_recursive(name)) # Step2: find op path of sub-block is_while = sub_block_op_desc.type in ["while"] sub_block_op_path = _find_op_path_( sub_block, sub_outputs, [], no_grad_set, op_path_dict, is_while ) return sub_block_op_path return sub_block.ops def _is_grad_op_(op): op_maker = core.op_proto_and_checker_maker backward = core.op_proto_and_checker_maker.OpRole.Backward if op_maker.kOpRoleVarAttrName() in op.attr_names and int( op.all_attrs()[op_maker.kOpRoleAttrName()] ) == int(backward): return True return False def _rename_grad_name_(name, grad_order): return 'grad/' * grad_order + name def _append_backward_ops_( block, ops, target_vars, target_block, no_grad_dict, grad_to_var, callbacks=None, input_grad_names_set=None, op_path_dict=None, distop_context=None, rename_var_map=None, grad_op_id_to_fwd_op=None, ): """ Create all grad ops, and insert them into given block Args: block(Block): the block where forward ops are ops(Op): the forward operators whose backward ops need to be added target_vars(list[Tensor]): the loss vars we want to calculate gradient. target_block(Block): the block which is going to hold new generated grad ops no_grad_dict(dict): key(int) block index val(set) a set of variable names. These variables have no gradient grad_to_var(dict)(output argument): key(str): grad variable name val(str): corresponding forward variable name callbacks(callable object): a callable object used to decorate new generated grad ops input_grad_names_set(set): this set is used to store the gradients' name which is generated by backward ops, and input_grad_names_set can help to prune the unnecessary backward ops. op_path_dict(dict): op_path_dict will be changed. key(int) block index val(list) the op path of block(index) rename_var_map(dict): used to associate target_grad var name with first grad_op input name. Only used in for high order gradient. """ # Build the mapping between the forward op and backward op (Only for auto parallel) def update_distop_context( distop_context, op_grad_to_var, appending_grad_times ): distop_context.grad_var_to_var[appending_grad_times].update( op_grad_to_var ) for op_desc in grad_op_desc: assert ( op_desc.original_id() not in distop_context.grad_op_id_to_op_id ) distop_context.grad_op_id_to_op_id[ op_desc.original_id() ] = op.desc.original_id() if callbacks is not None: assert isinstance(callbacks, (list, tuple)) for cb in callbacks: if not hasattr(cb, '__call__'): raise ValueError("'callback' must be a callable object.") # grad_op_descs holds created grad_op, and will be appended to target_block grad_op_descs = [] program = block.program if rename_var_map is None: rename_var_map = {} assert isinstance(rename_var_map, dict) # add grad_op_desc by reversed ops for op in reversed(ops): grad_sub_block_list = [] # If the op has its own sub-block, deal with the sub-block first if op.has_attr("sub_block"): sub_block = program.block(op._block_attr_id("sub_block")) grad_sub_block = program._create_block() grad_sub_block._set_forward_block_idx(sub_block.idx) # see follwing comments for why set None here. pre_input_grad_names_set = copy.copy(input_grad_names_set) input_grad_names_set = None sub_block_path = op_path_dict[op._block_attr_id("sub_block")] _append_backward_ops_( sub_block, sub_block_path, target_vars, grad_sub_block, no_grad_dict, grad_to_var, callbacks, input_grad_names_set, op_path_dict, grad_op_id_to_fwd_op=grad_op_id_to_fwd_op, ) input_grad_names_set = pre_input_grad_names_set program._rollback() grad_sub_block_list.append(grad_sub_block.desc) # Getting op's corresponding grad_op grad_op_desc, op_grad_to_var = core.get_grad_op_desc( op.desc, no_grad_dict[block.idx], grad_sub_block_list ) # record the mapping between fwd and bwd if grad_op_id_to_fwd_op is not None: for op_desc in grad_op_desc: grad_op_id_to_fwd_op[op_desc.original_id()] = op # Build the mapping between the forward op and backward op (Only for auto parallel) if distop_context is not None: update_distop_context( distop_context, op_grad_to_var, program._appending_grad_times ) else: default_ctx = getattr( paddle.distributed.auto_parallel.dist_context, '_g_default_distributed_context', None, ) if default_ctx is not None: distop_context = default_ctx.dist_op_context update_distop_context( distop_context, op_grad_to_var, program._appending_grad_times, ) # Set device for grad_op according to forward Op device_attr_name = core.op_proto_and_checker_maker.kOpDeviceAttrName() if op.desc.has_attr(device_attr_name): op_device = op.desc.attr(device_attr_name) for op_desc in grad_op_desc: op_desc._set_attr(device_attr_name, op_device) # Rename internal gradient variables in multiple backward # so that they have different names with previous backward. # For example: # y = x * x, grad = fluid.gradients(fluid.gradients(y, x) + y * y, x) # In second-time backward, gradient variable names of partial # forward network (y * y) may be have same names with first-time # fluid.gradients(y, x). # So rename here before _addup_repetitive_outputs_. if program._appending_grad_times > 1: for op_desc in grad_op_desc: forward_op_inputs = op.desc.input_arg_names() for name in op_desc.input_arg_names(): if name in rename_var_map and name not in forward_op_inputs: op_desc._rename_input(name, rename_var_map[name]) for name in op_desc.output_arg_names(): if "@GRAD" not in name: continue if block.desc.find_var(name.encode("ascii")): new_name = _rename_grad_name_( name, program._appending_grad_times ) op_desc._rename_output(name, new_name) rename_var_map[name] = new_name if name in op_grad_to_var: # Build the mapping between the grad var name and var name (Only for auto parallel) if distop_context is not None: distop_context.grad_var_to_var[ program._appending_grad_times ][new_name] = op_grad_to_var[name] op_grad_to_var[new_name] = op_grad_to_var[name] op_grad_to_var.pop(name) # If input_grad_names_set is not None, extend grad_op_descs only when # any input grad in outputs of previous grad ops. # But this strategy is not suited for while op for some control flow, # for example, for while op, the grads maybe generated in next loop. if input_grad_names_set is not None: is_grad_name = ( lambda name: name.find(core.grad_var_suffix()) != -1 or name in input_grad_names_set ) is_append_grad = False for op_desc in grad_op_desc: input_grad_names = [ name for name in op_desc.input_arg_names() if is_grad_name(name) ] # some code of gradient ops, like increment, are not very # standard, there is no @GRAD in these ops' inputs. if len(input_grad_names) == 0: is_append_grad = True break if _some_in_set_(input_grad_names, input_grad_names_set): grad_op_descs.append(op_desc) is_append_grad = True for name in op_desc.output_arg_names(): input_grad_names_set.add(name) if is_append_grad: grad_to_var.update(op_grad_to_var) else: grad_op_descs.extend(grad_op_desc) grad_to_var.update(op_grad_to_var) # record mapping bewteen grad var name and var name (Only for auto parallel) grad_var_to_var = None if distop_context is not None: grad_var_to_var = distop_context.grad_var_to_var[ program._appending_grad_times ] # sum parameter's gradients' var given multiple var gradient grad_op_descs = _addup_repetitive_outputs_( grad_op_descs, block.idx, grad_var_to_var, grad_op_id_to_fwd_op=grad_op_id_to_fwd_op, ) # if all outputs of the grad op are in no_grad_set, then just remove and fill zero # if all inputs of the grad op are in no_grad_set, just remove this op grad_op_descs = _remove_no_grad_branch_( grad_op_descs, no_grad_dict[block.idx], grad_op_id_to_fwd_op, target_vars, ) # remove some backward ops not_need_ops = _find_not_need_ops(grad_op_descs, ops, input_grad_names_set) grad_op_descs = [ op_desc for op_desc in grad_op_descs if op_desc not in not_need_ops ] # append op_desc in grad_op_descs to target_block op_role_attr_name = core.op_proto_and_checker_maker.kOpRoleAttrName() backward = core.op_proto_and_checker_maker.OpRole.Backward for op_desc in grad_op_descs: new_op_desc = target_block.desc.append_op() new_op_desc.copy_from(op_desc) new_op_desc._set_attr(op_role_attr_name, backward) grad_to_var["__current_op_desc__"] = new_op_desc if callbacks is not None: assert isinstance(callbacks, (list, tuple)) for cb in callbacks: cb(block=target_block, context=grad_to_var) def _is_grad_var_(var_name): return core.grad_var_suffix() in var_name # Find the op who holds the sub_block as its "sub_block" attr def _find_parent_op_(sub_block): sub_block_id = sub_block.idx if sub_block_id == 0: return None program = sub_block.program for block_id in range(program.num_blocks): block_desc = program.block(block_id).desc for op_idx in range(block_desc.op_size()): op = block_desc.op(op_idx) if ( op.has_attr("sub_block") and op._block_attr_id("sub_block") == sub_block_id ): return op # NOTE(paddle-dev): When optimizer is added in conditional block, # sub_block may not be found. return None def _append_backward_vars_(block, start_op_idx, grad_to_var, grad_info_map): """ Create new variables required by backward pass. Args: block(Block): the block where new variables will be created start_op_idx(int): Only variables required by ops in block.ops[start_op_idx : ] will be created grad_to_var(dict): key(str): grad variable name val(str): corresponding forward variable name In most cases, this dict is generated by _append_backward_ops_() grad_info_map(dict)(output argument): key(str): forward variable name val(tuple): a tuple of (str, Block), str is the corresponding grad name, Block is the block containing grad variable """ ops_to_remove = [] ''' NOTE(paddle-dev): while_grad op may hold some inputs which are not found in the parent/forward block, and they are also the outputs of while_grad op. These kinds of inputs are the recursive outputs inside while_grad op. They should be considered as "already created" when scanning the inner ops of while_grad ops. ''' parent_op = _find_parent_op_(block) parent_op_vars = [] if parent_op is not None: input_args = parent_op.input_arg_names() output_args = parent_op.output_arg_names() for in_arg in input_args: if in_arg in output_args: parent_op_vars.append(in_arg) for op_idx in range(start_op_idx, block.desc.op_size()): op_desc = block.desc.op(op_idx) if op_desc.has_attr("sub_block"): sub_block = block.program.block(op_desc._block_attr_id("sub_block")) _append_backward_vars_(sub_block, 0, grad_to_var, grad_info_map) grad_var_ins = [ var for var in op_desc.input_arg_names() if _is_grad_var_(var) ] grad_var_outs = [ var for var in op_desc.output_arg_names() if _is_grad_var_(var) ] inputs = [ var for var in op_desc.input_arg_names() if var != core.empty_var_name() ] outputs = [ var for var in op_desc.output_arg_names() if var != core.empty_var_name() ] # If the outputs of grad op is empty, just remove it if not outputs: ops_to_remove.append(op_idx) continue else: ''' If the output is not empty and there is any grad input, find whether there is any existing input. If not, just remove it. ''' if grad_var_ins: existing_grad_var_ins = [ var for var in grad_var_ins if block.desc.has_var_recursive(var.encode()) or var in parent_op_vars ] if not existing_grad_var_ins: ''' FIXME(paddle-dev, zengjinle): rnn_memory_helper_grad is used in recurrent op. The input of this op does not even exist in the program! Therefore, any dependency analysis would not work to this op! If I do not add the following code, this op would be pruned, and the calculation result would be wrong. Maybe we should re-design this op later... ''' if op_desc.type() not in ['rnn_memory_helper_grad']: ops_to_remove.append(op_idx) continue new_vars = set() # create new gradient variables for grad_var_name in op_desc.output_arg_names(): if ( block.desc.has_var_recursive(grad_var_name.encode()) or grad_var_name == core.empty_var_name() ): continue block.desc.var(grad_var_name.encode()) new_vars.add(grad_var_name) if grad_var_name not in grad_to_var: continue grad_info_map[grad_to_var[grad_var_name]] = (grad_var_name, block) # infer_shape and infer_type op_desc.check_attrs() op_desc.infer_var_type(block.desc) op_desc.infer_shape(block.desc) for arg in op_desc.output_arg_names(): if arg in new_vars: _infer_var_data_type_shape_(arg, block) for op_idx in reversed(ops_to_remove): block.desc._remove_op(op_idx, op_idx + 1) def _rename_grad_(block, start_op_idx, grad_to_var, target_grad_map): var_map = copy.copy(target_grad_map) for op_idx in range(start_op_idx, block.desc.op_size()): op_desc = block.desc.op(op_idx) for name in op_desc.input_arg_names(): if name in var_map: op_desc._rename_input(name, var_map[name]) for name in op_desc.output_arg_names(): if "@GRAD" not in name: continue if block.desc.find_var(name.encode("ascii")): new_name = unique_name.generate(name) op_desc._rename_output(name, new_name) var_map[name] = new_name for g, ng in var_map.items(): if g in grad_to_var: grad_to_var[ng] = grad_to_var[g] grad_to_var.pop(g) def _get_stop_gradients_(program): no_grad_dict = dict() assert isinstance(program, framework.Program) for block in program.blocks: assert isinstance(block, framework.Block) block_no_grad_set = set() for var in list(block.vars.values()): assert isinstance(var, framework.Variable) if var.stop_gradient: block_no_grad_set.add(_append_grad_suffix_(var.name)) no_grad_dict[block.idx] = block_no_grad_set return no_grad_dict def _get_son_parent_block_idx_dict(program, current_block_idx): son_parent_block_idx_dict = collections.OrderedDict() while current_block_idx >= 0: parent_block_idx = program.block(current_block_idx).parent_idx son_parent_block_idx_dict[current_block_idx] = parent_block_idx current_block_idx = parent_block_idx return son_parent_block_idx_dict def _get_no_grad_set_name(no_grad_set): no_grad_set_name = set() if no_grad_set is not None: if isinstance(no_grad_set, (set, list, tuple)): for i, no_grad_var in enumerate(no_grad_set): if isinstance(no_grad_var, framework.Variable): no_grad_set_name.add(no_grad_var.name) elif isinstance(no_grad_var, str): no_grad_set_name.add(no_grad_var) else: raise TypeError( "The type of no_grad_set's member must be paddle.fluid.Variable or str, but received %s." % (type(no_grad_var)) ) else: raise TypeError( "The type of no_grad_set should be set or list or tuple, but received {}".format( type(no_grad_set) ) ) return no_grad_set_name @framework.static_only def append_backward( loss, parameter_list=None, no_grad_set=None, callbacks=None, checkpoints=None, distop_context=None, ): """ :api_attr: Static Graph This function appends backward part to main_program. A complete neural network training is made up of forward and backward propagation. However, when we configure a network, we only need to specify its forward part. This function uses the chain rule to automatically generate the backward part according to the forward part. In most cases, users do not need to invoke this function manually. It will be automatically invoked by the optimizer's `minimize` function. Parameters: loss(Tensor): The loss Tensor of the network. parameter_list(list[Tensor|str]|tuple[Tensor|str], optional): List/Tuple of Parameters or Parameter.names that need to be updated by optimizers. If it is None, all parameters will be updated. Default: None. no_grad_set(set[Tensor|str], optional): Set of Tensors or Tensor.names in the :ref:`api_guide_Block_en` 0 whose gradients should be ignored. All Tensors with `stop_gradient=True` from all blocks will be automatically added into this set. If this parameter is not None, the Tensors or Tensor.names in this set will be added to the default set. Default: None. callbacks(list[callable object]|tuple[callable object], optional): List/Tuple of callback functions. The callbacks are used for doing some custom jobs during backward part building. All callable objects in it will be invoked once each time a new gradient operator is added into the program. The callable object must have two input parameters: ``block`` and ``context`` . The ``block`` is the :ref:`api_guide_Block_en` which the new gradient operator will be added to. The ``context`` is a map, whose keys are gradient Tensor names and values are corresponding original :ref:`api_guide_tensor_en` . In addition to this, the ``context`` has another special key-value pair: the key is string ``__current_op_desc__`` and the value is the op_desc of the gradient operator who has just triggered the callable object. Default: None. Returns: list of tuple ( :ref:`api_guide_tensor_en` , :ref:`api_guide_tensor_en` ): Pairs of parameter and its corresponding gradients. The key is the parameter and the value is gradient Tensor. Raises: AssertionError: If ``loss`` is not an instance of Tensor. Examples: .. code-block:: python import paddle import paddle.nn.functional as F paddle.enable_static() x = paddle.static.data(name='x', shape=[None, 13], dtype='int64') y = paddle.static.data(name='y', shape=[None, 1], dtype='float32') x_emb = paddle.static.nn.embedding(x, size=[100, 256]) y_predict = paddle.static.nn.fc(x=x_emb, size=1, activation=None, name='my_fc') loss = F.square_error_cost(input=y_predict, label=y) avg_loss = paddle.mean(loss) # Get all weights in main_program, not include bias. all_weights = [param for param in paddle.static.default_main_program().block(0).all_parameters() if 'w_' in param.name] all_weights_name = [w.name for w in all_weights] # return all param_grads needed to be updated if parameter_list set default None. p_g_list1 = paddle.static.append_backward(loss=avg_loss) # output: [(embedding_0.w_0, embedding_0.w_0@GRAD), (my_fc.w_0, my_fc.w_0@GRAD), (my_fc.b_0, my_fc.b_0@GRAD)] # return the param_grads corresponding to parameter_list that can be list of param (Tensor). p_g_list2 = paddle.static.append_backward(loss=avg_loss, parameter_list=all_weights) # output: [(embedding_0.w_0, embedding_0.w_0@GRAD), (my_fc.w_0, my_fc.w_0@GRAD)] # parameter_list can be list of param.name (str). p_g_list3 = paddle.static.append_backward(loss=avg_loss, parameter_list=all_weights_name) # output: [(embedding_0.w_0, embedding_0.w_0@GRAD), (my_fc.w_0, my_fc.w_0@GRAD)] # no_grad_set can be set of Tensors that means grad will be cut off from these Tensors. p_g_list4 = paddle.static.append_backward(loss=avg_loss, no_grad_set=set([x_emb])) # output: [(my_fc.w_0, my_fc.w_0@GRAD), (my_fc.b_0, my_fc.b_0@GRAD)] # no_grad_set can be set of Tensor.name when the Tensor is created inside layers and can't be specified explicitly. p_g_list5 = paddle.static.append_backward(loss=avg_loss, no_grad_set=set(['my_fc.b_0'])) # output: [(embedding_0.w_0, embedding_0.w_0@GRAD), (my_fc.w_0, my_fc.w_0@GRAD)] # return [] because all param_grads are filtered by no_grad_set. p_g_list6 = paddle.static.append_backward(loss=avg_loss, parameter_list=all_weights, no_grad_set=set(all_weights)) """ grad_op_id_to_fwd_op = ( {} ) # for cuda graph usage, recording the mapping between grad op original id to fwd op check_type( loss, 'loss', framework.Variable, 'paddle.static.append_backward' ) if loss.op is None: # the loss is from a cloned program. Find loss op manually. _find_loss_op_(loss) loss.op._set_attr( core.op_proto_and_checker_maker.kOpRoleAttrName(), int(core.op_proto_and_checker_maker.OpRole.Forward) | int(core.op_proto_and_checker_maker.OpRole.Loss), ) if callbacks is not None: check_type( callbacks, 'callbacks', (list, tuple), 'paddle.static.append_backward', ) program = loss.block.program root_block = program.block(0) current_block_idx = program.current_block_idx current_block = program.block(current_block_idx) is_in_control_flow = current_block_idx != 0 # Double grad is not supported in sub-block (control flow) if not is_in_control_flow: # _appending_grad_times used for double grad program._appending_grad_times += 1 if no_grad_set is None: no_grad_set = set() else: no_grad_set = _get_no_grad_set_name(copy.copy(no_grad_set)) no_grad_dict = _get_stop_gradients_(program) # no_grad_set only contains vars in block 0 # Todo(liym27): support vars in sub block no_grad_dict[0].update(list(map(_append_grad_suffix_, no_grad_set))) # Currently it is only to support the optimizer.minimize # in a switch branch, which can append_backward in a sub_block. # Note: while_loop is in control flow, but it makes no sense to call optimizer in while. # Todo: report error when it is in while_loop if is_in_control_flow: # create grad block if in switch control flow. target_grad_block = program._create_block( parent_idx=current_block.parent_idx ) target_grad_block._set_forward_block_idx(current_block_idx) # after _create_block, program.current_block changes else: target_grad_block = root_block son_parent_block_idx_dict = _get_son_parent_block_idx_dict( program, current_block_idx ) block_fwd_op_num_dict = {} # block_id: fwd_op_num for idx in son_parent_block_idx_dict: block_fwd_op_num_dict[idx] = program.block(idx).desc.op_size() grad_to_var = dict() # pass the cuda_graph_attr to the fill_constant which generates the loss_grad op_desc = _create_loss_op_desc_(loss) grad_op_id_to_fwd_op[op_desc.original_id()] = loss.op target_grad_block.desc.append_op().copy_from(op_desc) for block_idx in son_parent_block_idx_dict: block = program.block(block_idx) block_no_grad_set = set( map(_strip_grad_suffix_, no_grad_dict[block_idx]) ) op_path_dict = dict() op_path = _find_op_path_( block, [loss], [], block_no_grad_set, op_path_dict ) no_grad_vars = _find_no_grad_vars( block, op_path, [loss], block_no_grad_set ) block_no_grad_set.update(no_grad_vars) no_grad_dict[block_idx].update( list(map(_append_grad_suffix_, block_no_grad_set)) ) input_grad_names_set = None # For double backward, input_grad_names is used for filtering # some non-used gradients op(s). # TODO(liym27): need a better design. # not support double grad in control flow sub-block now. if not is_in_control_flow: if program._appending_grad_times > 1: input_grad_names_set = set([_append_grad_suffix_(loss.name)]) # TODO: support _append_backward_ops_with_checkpoints_ in # sub-block (control flow) is_recompute = False if ( checkpoints is not None and isinstance(checkpoints, list) and len(checkpoints) > 0 ): is_recompute = True ( program_stat, checkpoint_names, vars_should_be_hold, recompute_segments, ) = _append_backward_ops_with_checkpoints_( root_block, op_path, [loss], root_block, no_grad_dict, grad_to_var, checkpoints, grad_op_id_to_fwd_op, ) else: _append_backward_ops_( block, # the block where forward ops are in op_path, [loss], target_grad_block, no_grad_dict, grad_to_var, callbacks, input_grad_names_set=input_grad_names_set, op_path_dict=op_path_dict, distop_context=distop_context, grad_op_id_to_fwd_op=grad_op_id_to_fwd_op, ) grad_info_map = dict() # if in control flow, target_grad_block is a created new block which only contains grad ops, # so fwd_op_num is set to 0. fwd_op_num = ( block_fwd_op_num_dict[current_block_idx] if not is_in_control_flow else 0 ) # Because append_backward may be called multiple times, # we need rename the internal gradient variables so that they have # different names. _rename_grad_(target_grad_block, fwd_op_num, grad_to_var, {}) _append_backward_vars_( target_grad_block, fwd_op_num, grad_to_var, grad_info_map ) program.current_block_idx = current_block_idx program._sync_with_cpp() # for cuda graph, copy the cuda graph attr from forward op to backward op for op in target_grad_block.ops: if grad_op_id_to_fwd_op.get(op.desc.original_id(), None) is not None: fwd_op = grad_op_id_to_fwd_op[op.desc.original_id()] op._cuda_graph_attr = fwd_op._cuda_graph_attr if parameter_list is not None: check_type( parameter_list, 'parameter_list', (list, tuple, set), 'fluid.backward.append_backward', ) parameters = [] for i, param in enumerate(parameter_list): check_type( param, 'parameter_list[%s]' % i, (framework.Variable, str), 'fluid.backward.append_backward', ) if isinstance(param, framework.Variable): parameters.append(param.name) elif isinstance(param, str): parameters.append(param) else: params = program.global_block().all_parameters() parameters = [param.name for param in params if param.trainable] params_and_grads = [] op_role_var_attr_name = core.op_proto_and_checker_maker.kOpRoleVarAttrName() for param in parameters: if param not in grad_info_map: continue grad_info = grad_info_map[param] grad_block = grad_info[1] if not grad_block.has_var(grad_info[0]): raise ValueError( "grad block[{0}] did not have grad var {1}".format( grad_info[1], grad_info[0] ) ) # Get the param var from the global block param_var = program.global_block().var(param) grad_var = grad_block.var(grad_info[0]) if not is_in_control_flow: if loss.block.has_var(grad_info[0]): params_and_grads.append((param_var, grad_var)) else: params_and_grads.append((param_var, None)) else: params_and_grads.append((param_var, grad_var)) for p, g in params_and_grads: if g is None: continue ops = ( grad_block.ops if is_in_control_flow else program.global_block().ops ) for op in reversed(ops): assert isinstance(op, framework.Operator) if g.name in op.output_arg_names: g.op = op break if g.op is None: raise ValueError("Unexpected branch") attr_val = [p.name, g.name] if g.op.has_attr(op_role_var_attr_name): attr_val.extend(g.op.attr(op_role_var_attr_name)) g.op._set_attr(op_role_var_attr_name, attr_val) if is_recompute: return params_and_grads, checkpoint_names else: return params_and_grads def _as_list(x): if x is None: return [] return list(x) if isinstance(x, Sequence) else [x] def _is_ancestor_block(ancestor_block, block): prog = block.program ancestor_idx = ancestor_block.idx parent_idx = block.parent_idx while parent_idx != -1: if parent_idx == ancestor_idx: return True parent_idx = prog.block(parent_idx).parent_idx return False def _get_output_names(cur_block, targets): """ In `cur_block`, get output names those linked to targets. NOTE: 1. `targets` can be in `cur_block`; Usually, `targets` is in `cur_block`. However, considering control flow, 2. `targets` may be in sub-block but `cur_block` is an ancestor of `targets[0].block`; 3. `targets` may be in the block which is ancestor of `cur_block`. """ block = targets[0].block if targets else cur_block current_output_names = set([out.name for out in targets]) # 1. If `targets` in cur_block or the ancestral block of `cur_block` if block.idx == cur_block.idx or _is_ancestor_block(block, cur_block): return current_output_names # 2. If `cur_block` is an ancestor of `targets[0].block`, run while loop prog = cur_block.program while block.idx != cur_block.idx: assert block.parent_idx != -1 parent_block = prog.block(block.parent_idx) parent_block_output_names = set() for op in reversed(block.ops): if _some_in_set_(op.desc.output_arg_names(), current_output_names): for name in op.desc.input_arg_names(): current_output_names.add(name) if not block.desc.find_var( name.encode() ) and parent_block.desc.find_var(name.encode()): parent_block_output_names.add(name) block = parent_block current_output_names = parent_block_output_names return current_output_names def _find_no_grad_vars(block, op_path, targets, no_grad_set): """ Find the vars which is not used in the program, and those vars belong to no_grad_var. """ output_names = _get_output_names(block, targets) no_grad_var = [] for i, op in reversed(list(enumerate(op_path))): # If the op has sub_block, it is too complicated to find the correct no_grad_var. if not op.has_attr("sub_block"): for out_var in op.desc.output_arg_names(): if ( out_var not in output_names and out_var not in op.desc.input_arg_names() and not block.vars[out_var].stop_gradient ): no_grad_var.append(out_var) for name in op.desc.input_arg_names(): if name not in no_grad_set: output_names.add(name) return set(no_grad_var) def _find_op_path_( block, targets, inputs, no_grad_set, op_path_dict=None, is_while=False ): """ It is used to find the grad path in `block`. Args: block(Block): The block in which to get op path. targets(list[Variable]): The target variables. inputs(list[Variable]): The input variables. no_grad_set(set): The set of no grad var name. no_grad_set will be changed. op_path_dict(dict): op_path_dict will be changed. op_path_dict will be changed. key(int) block index val(list) the op path of block(index) is_while(bool): Whether or not `block` is while block Return: The forward op path of block corresponding to backward op. """ input_names = set([inp.name for inp in inputs]) output_names = _get_output_names(block, targets) if op_path_dict is None: op_path_dict = dict() relevant_op_flags = [True] * len(block.ops) # All the inputs of the block are used if inputs is empty, if inputs: for i, op in enumerate(block.ops): if _some_in_set_( op.desc.input_arg_names(), input_names ) and core.has_non_empty_grad_op_maker(op.type): for name in op.desc.output_arg_names(): if name not in no_grad_set: input_names.add(name) else: relevant_op_flags[i] = False for i, op in reversed(list(enumerate(block.ops))): if op.has_attr("sub_block"): sub_block_id = op._block_attr_id("sub_block") sub_block = block.program.block(sub_block_id) sub_block_target_names = output_names & set(op.output_arg_names) sub_block_path = _get_sub_block_path( sub_block, op, set(), op_path_dict, sub_block_target_names ) op_path_dict[sub_block_id] = sub_block_path if _some_in_set_( op.desc.output_arg_names(), output_names ) and core.has_non_empty_grad_op_maker(op.type): for name in op.desc.input_arg_names(): if name not in no_grad_set: output_names.add(name) else: relevant_op_flags[i] = False if is_while: # If block is while block, dealing with op specifically again. # TODO(liym27): Consider special types of ops. for i, op in reversed(list(enumerate(block.ops))): if relevant_op_flags[i] == False and _some_in_set_( op.desc.output_arg_names(), output_names ): relevant_op_flags[i] = True op_path = [ block.ops[i] for i in range(len(block.ops)) if relevant_op_flags[i] ] if inputs: for op in op_path: for name in op.desc.input_arg_names(): if name not in input_names and block.vars[name].stop_gradient: no_grad_set.add(name) return op_path def calc_gradient(targets, inputs, target_gradients=None, no_grad_set=None): """ Backpropagate the gradients of targets to inputs. Args: targets(Tensor|list[Tensor]|tuple[Tensor]): The target Tensors inputs(Tensor|list[Tensor]|tuple[Tensor]): The input Tensors target_gradients (Tensor|list[Tensor]|tuple[Tensor], optional): The gradient Tensors of targets which has the same shape with targets, If None, ones will be created for them. no_grad_set(set[Tensor|str], optional): Set of Tensors or Tensor.names in the :ref:`api_guide_Block_en` 0 whose gradients should be ignored. All Tensors with `stop_gradient=True` from all blocks will be automatically added into this set. If this parameter is not None, the Tensors or Tensor.names in this set will be added to the default set. Default: None. Return: (list[Tensor]): A list of gradients for inputs If an input does not affect targets, the corresponding gradient Tensor will be None """ targets = _as_list(targets) inputs = _as_list(inputs) target_gradients = _as_list(target_gradients) block = targets[0].block prog = block.program # increase appending gradients times prog._appending_grad_times += 1 block_idx = block.idx if not target_gradients: target_gradients = [None] * len(targets) if len(targets) != len(target_gradients): raise ValueError( "Should have the same number of target_gradients as targets" ) if no_grad_set is None: no_grad_set = set() else: no_grad_set = _get_no_grad_set_name(copy.copy(no_grad_set)) no_grad_dict = _get_stop_gradients_(prog) no_grad_dict[0].update(list(map(_append_grad_suffix_, no_grad_set))) fwd_op_num = block.desc.op_size() input_grad_names_set = set() target_grad_map = {} rename_var_map = {} for i, grad in enumerate(target_gradients): target = targets[i] grad_name = _append_grad_suffix_(target.name) if grad is None: target_shape = target.name + '_shape' block.desc.append_op().copy_from( _create_op_desc_( "shape", {'Input': [target.name]}, {"Out": [target_shape]}, {}, ) ) input_grad_names_set.add(target_shape) op_desc = _create_op_desc_( "fill_constant", {"ShapeTensor": [target_shape]}, {"Out": [grad_name]}, { "shape": target.shape, "value": 1.0, "dtype": target.dtype, }, ) block.desc.append_op().copy_from(op_desc) input_grad_names_set.add(grad_name) else: if target.block.idx != block_idx or target.block.program != prog: raise ValueError("all targets must be in the same block") if target.shape != grad.shape: raise ValueError( "The shapes of target and grad are different: %s %s" % (target.name, grad.name) ) target_grad_map[_append_grad_suffix_(target.name)] = grad.name input_grad_names_set.add(grad.name) rename_var_map[grad_name] = grad.name # For double backward, input_grad_names is used for filter # some non-used gradients op. rename_var_map is used to # associate target_grad var name with first grad_op input name. if prog._appending_grad_times == 1: input_grad_names_set = None rename_var_map = {} for input in inputs: if input.block.program != prog: raise "input must be in the same program as targets" block_no_grad_set = set(map(_strip_grad_suffix_, no_grad_dict[0])) op_path_dict = dict() op_path = _find_op_path_( block, targets, inputs, block_no_grad_set, op_path_dict ) # find no grad var by op_path no_grad_vars = _find_no_grad_vars( block, op_path, targets, block_no_grad_set ) block_no_grad_set.update(no_grad_vars) no_grad_dict[0].update(list(map(_append_grad_suffix_, block_no_grad_set))) grad_to_var = dict() grad_info_map = dict() _append_backward_ops_( block, op_path, targets, block, no_grad_dict, grad_to_var, input_grad_names_set=input_grad_names_set, op_path_dict=op_path_dict, rename_var_map=rename_var_map, ) # Because calc_gradient may be called multiple times, # we need rename the internal gradient variables so that they have # different names. _rename_grad_(block, fwd_op_num, grad_to_var, target_grad_map) _append_backward_vars_(block, fwd_op_num, grad_to_var, grad_info_map) prog._sync_with_cpp() grad_vars = [] for input_var in inputs: if input_var.name not in grad_info_map: grad_vars.append(None) else: grad_info = grad_info_map[input_var.name] grad_block = grad_info[1] grad_var = grad_block.var(grad_info[0]) grad_vars.append(grad_var) if len(grad_vars) == 1: return grad_vars[0] else: return grad_vars @framework.static_only def gradients(targets, inputs, target_gradients=None, no_grad_set=None): """ Backpropagate the gradients of targets to inputs. Args: targets (Tensor|list[Tensor]|tuple[Tensor]): The target Tensors. inputs (Tensor|list[Tensor]|tuple[Tensor]): The input Tensors. target_gradients (Tensor|list[Tensor]|tuple[Tensor], optional): The gradient Tensor of targets which has the same shape with targets, If None, ones will be created for them. no_grad_set (set[Tensor|str], optional): Set of Tensors or Tensor.names in the :ref:`api_guide_Block_en` 0 whose gradients should be ignored. All Tensors with ``stop_gradient=True`` from all blocks will be automatically added into this set. If this parameter is not None, the Tensors or Tensor.names in this set will be added to the default set. Default: None. Return: (list[Tensor]): A list of gradients for inputs If an input does not affect targets, the corresponding gradient Tensor will be None. Examples: .. code-block:: python :name: code-example import paddle import paddle.nn.functional as F paddle.enable_static() x = paddle.static.data(name='x', shape=[None, 2, 8, 8], dtype='float32') x.stop_gradient=False y = paddle.static.nn.conv2d(x, 4, 1, bias_attr=False) y = F.relu(y) z = paddle.static.gradients([y], x) print(z) # [var x@GRAD : LOD_TENSOR.shape(-1, 2, 8, 8).dtype(float32).stop_gradient(False)] """ check_type( targets, 'targets', (framework.Variable, list, tuple), 'paddle.static.gradients', ) check_type( inputs, 'inputs', (framework.Variable, list, tuple), 'paddle.static.gradients', ) check_type( target_gradients, 'target_gradients', (framework.Variable, list, tuple, type(None)), 'paddle.static.gradients', ) outs = calc_gradient(targets, inputs, target_gradients, no_grad_set) return _as_list(outs) @framework.static_only def gradients_with_optimizer(program, optimizer, inputs=None, outputs=None): """ :api_attr: Static Graph Backpropagate the gradients of the program and apply the gradients with the given optimizer. Args: program (Program): The input program. optimizer (Optimizer): The optimizer to apply the gradients. inputs (Tensor|list[Tensor]|tuple[Tensor], optional): The input Tensors. If None, the inputs will be created from the input variables in the given program. Default:None. outputs (Tensor|list[Tensor]|tuple[Tensor], optional): The output Tensors. If None, the outputs will be created from the output variables in the given program. Default: None. Return: tuple: tuple (optimize_ops, params_grads), A list of operators appended by gradients_with_optimizer and a list of (param, grad) variable pairs, param is ``Parameter``, grad is the gradient value corresponding to the parameter. The returned tuple can be passed to ``fetch_list`` in ``Executor.run()`` to indicate program pruning. If so, the program will be pruned by ``feed`` and ``fetch_list`` before run, see details in ``Executor``. Examples: .. code-block:: python import paddle import paddle.static as static paddle.enable_static() img = static.data(name='image', shape=[None, 784]) pred = static.nn.fc(x=img, size=10, activation='relu') loss = paddle.mean(pred) opt_ops, pram_grads = paddle.fluid.backward.gradients_with_optimizer(static.default_main_program(), opt) print(opt_ops) """ check_type( program, 'program', paddle.fluid.Program, 'paddle.static.gradients_with_optimizer', ) check_type( optimizer, 'optimizer', paddle.optimizer.Optimizer, 'paddle.static.gradients_with_optimizer', ) if inputs is None or outputs is None: in_set = set() out_set = set() for block in program.blocks: for op in block.ops: for name in op.input_arg_names: in_set.add(block.vars[name]) for name in op.output_arg_names: out_set.add(block.vars[name]) if inputs is None: inputs = list(in_set.difference(out_set)) if outputs is None: outputs = list(out_set.difference(in_set)) grads = gradients(outputs, inputs) with program_guard(program, None): pram_grads = [ (pram, grad) for pram, grad in zip(inputs, grads) if isinstance(pram, paddle.fluid.framework.Parameter) and grad is not None ] optimize_ops = optimizer.apply_gradients(pram_grads) return optimize_ops, pram_grads