# Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserve. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. """ All layers just related to the detection neural network. """ from __future__ import print_function from .layer_function_generator import generate_layer_fn from .layer_function_generator import autodoc, templatedoc from ..layer_helper import LayerHelper from ..framework import Variable from .loss import softmax_with_cross_entropy from . import tensor from . import nn from . import ops from ... import compat as cpt from ..data_feeder import check_variable_and_dtype, check_type, check_dtype import math import six import numpy as np from functools import reduce from ..data_feeder import convert_dtype, check_variable_and_dtype, check_type, check_dtype __all__ = [ 'prior_box', 'density_prior_box', 'multi_box_head', 'bipartite_match', 'target_assign', 'detection_output', 'ssd_loss', 'rpn_target_assign', 'retinanet_target_assign', 'sigmoid_focal_loss', 'anchor_generator', 'roi_perspective_transform', 'generate_proposal_labels', 'generate_proposals', 'generate_mask_labels', 'iou_similarity', 'box_coder', 'polygon_box_transform', 'yolov3_loss', 'yolo_box', 'box_clip', 'multiclass_nms', 'locality_aware_nms', 'retinanet_detection_output', 'distribute_fpn_proposals', 'box_decoder_and_assign', 'collect_fpn_proposals', ] def retinanet_target_assign(bbox_pred, cls_logits, anchor_box, anchor_var, gt_boxes, gt_labels, is_crowd, im_info, num_classes=1, positive_overlap=0.5, negative_overlap=0.4): """ **Target Assign Layer for the detector RetinaNet.** This OP finds out positive and negative samples from all anchors for training the detector `RetinaNet `_ , and assigns target labels for classification along with target locations for regression to each sample, then takes out the part belonging to positive and negative samples from category prediction( :attr:`cls_logits`) and location prediction( :attr:`bbox_pred`) which belong to all anchors. The searching principles for positive and negative samples are as followed: 1. Anchors are assigned to ground-truth boxes when it has the highest IoU overlap with a ground-truth box. 2. Anchors are assigned to ground-truth boxes when it has an IoU overlap higher than :attr:`positive_overlap` with any ground-truth box. 3. Anchors are assigned to background when its IoU overlap is lower than :attr:`negative_overlap` for all ground-truth boxes. 4. Anchors which do not meet the above conditions do not participate in the training process. Retinanet predicts a :math:`C`-vector for classification and a 4-vector for box regression for each anchor, hence the target label for each positive(or negative) sample is a :math:`C`-vector and the target locations for each positive sample is a 4-vector. As for a positive sample, if the category of its assigned ground-truth box is class :math:`i`, the corresponding entry in its length :math:`C` label vector is set to 1 and all other entries is set to 0, its box regression targets are computed as the offset between itself and its assigned ground-truth box. As for a negative sample, all entries in its length :math:`C` label vector are set to 0 and box regression targets are omitted because negative samples do not participate in the training process of location regression. After the assignment, the part belonging to positive and negative samples is taken out from category prediction( :attr:`cls_logits` ), and the part belonging to positive samples is taken out from location prediction( :attr:`bbox_pred` ). Args: bbox_pred(Variable): A 3-D Tensor with shape :math:`[N, M, 4]` represents the predicted locations of all anchors. :math:`N` is the batch size( the number of images in a mini-batch), :math:`M` is the number of all anchors of one image, and each anchor has 4 coordinate values. The data type of :attr:`bbox_pred` is float32 or float64. cls_logits(Variable): A 3-D Tensor with shape :math:`[N, M, C]` represents the predicted categories of all anchors. :math:`N` is the batch size, :math:`M` is the number of all anchors of one image, and :math:`C` is the number of categories (**Notice: excluding background**). The data type of :attr:`cls_logits` is float32 or float64. anchor_box(Variable): A 2-D Tensor with shape :math:`[M, 4]` represents the locations of all anchors. :math:`M` is the number of all anchors of one image, each anchor is represented as :math:`[xmin, ymin, xmax, ymax]`, :math:`[xmin, ymin]` is the left top coordinate of the anchor box, :math:`[xmax, ymax]` is the right bottom coordinate of the anchor box. The data type of :attr:`anchor_box` is float32 or float64. Please refer to the OP :ref:`api_fluid_layers_anchor_generator` for the generation of :attr:`anchor_box`. anchor_var(Variable): A 2-D Tensor with shape :math:`[M,4]` represents the expanded factors of anchor locations used in loss function. :math:`M` is number of all anchors of one image, each anchor possesses a 4-vector expanded factor. The data type of :attr:`anchor_var` is float32 or float64. Please refer to the OP :ref:`api_fluid_layers_anchor_generator` for the generation of :attr:`anchor_var`. gt_boxes(Variable): A 1-level 2-D LoDTensor with shape :math:`[G, 4]` represents locations of all ground-truth boxes. :math:`G` is the total number of all ground-truth boxes in a mini-batch, and each ground-truth box has 4 coordinate values. The data type of :attr:`gt_boxes` is float32 or float64. gt_labels(variable): A 1-level 2-D LoDTensor with shape :math:`[G, 1]` represents categories of all ground-truth boxes, and the values are in the range of :math:`[1, C]`. :math:`G` is the total number of all ground-truth boxes in a mini-batch, and each ground-truth box has one category. The data type of :attr:`gt_labels` is int32. is_crowd(Variable): A 1-level 1-D LoDTensor with shape :math:`[G]` which indicates whether a ground-truth box is a crowd. If the value is 1, the corresponding box is a crowd, it is ignored during training. :math:`G` is the total number of all ground-truth boxes in a mini-batch. The data type of :attr:`is_crowd` is int32. im_info(Variable): A 2-D Tensor with shape [N, 3] represents the size information of input images. :math:`N` is the batch size, the size information of each image is a 3-vector which are the height and width of the network input along with the factor scaling the origin image to the network input. The data type of :attr:`im_info` is float32. num_classes(int32): The number of categories for classification, the default value is 1. positive_overlap(float32): Minimum overlap required between an anchor and ground-truth box for the anchor to be a positive sample, the default value is 0.5. negative_overlap(float32): Maximum overlap allowed between an anchor and ground-truth box for the anchor to be a negative sample, the default value is 0.4. :attr:`negative_overlap` should be less than or equal to :attr:`positive_overlap`, if not, the actual value of :attr:`positive_overlap` is :attr:`negative_overlap`. Returns: A tuple with 6 Variables: **predict_scores** (Variable): A 2-D Tensor with shape :math:`[F+B, C]` represents category prediction belonging to positive and negative samples. :math:`F` is the number of positive samples in a mini-batch, :math:`B` is the number of negative samples, and :math:`C` is the number of categories (**Notice: excluding background**). The data type of :attr:`predict_scores` is float32 or float64. **predict_location** (Variable): A 2-D Tensor with shape :math:`[F, 4]` represents location prediction belonging to positive samples. :math:`F` is the number of positive samples. :math:`F` is the number of positive samples, and each sample has 4 coordinate values. The data type of :attr:`predict_location` is float32 or float64. **target_label** (Variable): A 2-D Tensor with shape :math:`[F+B, 1]` represents target labels for classification belonging to positive and negative samples. :math:`F` is the number of positive samples, :math:`B` is the number of negative, and each sample has one target category. The data type of :attr:`target_label` is int32. **target_bbox** (Variable): A 2-D Tensor with shape :math:`[F, 4]` represents target locations for box regression belonging to positive samples. :math:`F` is the number of positive samples, and each sample has 4 coordinate values. The data type of :attr:`target_bbox` is float32 or float64. **bbox_inside_weight** (Variable): A 2-D Tensor with shape :math:`[F, 4]` represents whether a positive sample is fake positive, if a positive sample is false positive, the corresponding entries in :attr:`bbox_inside_weight` are set 0, otherwise 1. :math:`F` is the number of total positive samples in a mini-batch, and each sample has 4 coordinate values. The data type of :attr:`bbox_inside_weight` is float32 or float64. **fg_num** (Variable): A 2-D Tensor with shape :math:`[N, 1]` represents the number of positive samples. :math:`N` is the batch size. **Notice: The number of positive samples is used as the denominator of later loss function, to avoid the condition that the denominator is zero, this OP has added 1 to the actual number of positive samples of each image.** The data type of :attr:`fg_num` is int32. Examples: .. code-block:: python import paddle.fluid as fluid bbox_pred = fluid.data(name='bbox_pred', shape=[1, 100, 4], dtype='float32') cls_logits = fluid.data(name='cls_logits', shape=[1, 100, 10], dtype='float32') anchor_box = fluid.data(name='anchor_box', shape=[100, 4], dtype='float32') anchor_var = fluid.data(name='anchor_var', shape=[100, 4], dtype='float32') gt_boxes = fluid.data(name='gt_boxes', shape=[10, 4], dtype='float32') gt_labels = fluid.data(name='gt_labels', shape=[10, 1], dtype='float32') is_crowd = fluid.data(name='is_crowd', shape=[1], dtype='float32') im_info = fluid.data(name='im_infoss', shape=[1, 3], dtype='float32') score_pred, loc_pred, score_target, loc_target, bbox_inside_weight, fg_num = \\ fluid.layers.retinanet_target_assign(bbox_pred, cls_logits, anchor_box, anchor_var, gt_boxes, gt_labels, is_crowd, im_info, 10) """ check_variable_and_dtype(bbox_pred, 'bbox_pred', ['float32', 'float64'], 'retinanet_target_assign') check_variable_and_dtype(cls_logits, 'cls_logits', ['float32', 'float64'], 'retinanet_target_assign') check_variable_and_dtype(anchor_box, 'anchor_box', ['float32', 'float64'], 'retinanet_target_assign') check_variable_and_dtype(anchor_var, 'anchor_var', ['float32', 'float64'], 'retinanet_target_assign') check_variable_and_dtype(gt_boxes, 'gt_boxes', ['float32', 'float64'], 'retinanet_target_assign') check_variable_and_dtype(gt_labels, 'gt_labels', ['int32'], 'retinanet_target_assign') check_variable_and_dtype(is_crowd, 'is_crowd', ['int32'], 'retinanet_target_assign') check_variable_and_dtype(im_info, 'im_info', ['float32', 'float64'], 'retinanet_target_assign') helper = LayerHelper('retinanet_target_assign', **locals()) # Assign target label to anchors loc_index = helper.create_variable_for_type_inference(dtype='int32') score_index = helper.create_variable_for_type_inference(dtype='int32') target_label = helper.create_variable_for_type_inference(dtype='int32') target_bbox = helper.create_variable_for_type_inference( dtype=anchor_box.dtype) bbox_inside_weight = helper.create_variable_for_type_inference( dtype=anchor_box.dtype) fg_num = helper.create_variable_for_type_inference(dtype='int32') helper.append_op( type="retinanet_target_assign", inputs={ 'Anchor': anchor_box, 'GtBoxes': gt_boxes, 'GtLabels': gt_labels, 'IsCrowd': is_crowd, 'ImInfo': im_info }, outputs={ 'LocationIndex': loc_index, 'ScoreIndex': score_index, 'TargetLabel': target_label, 'TargetBBox': target_bbox, 'BBoxInsideWeight': bbox_inside_weight, 'ForegroundNumber': fg_num }, attrs={ 'positive_overlap': positive_overlap, 'negative_overlap': negative_overlap }) loc_index.stop_gradient = True score_index.stop_gradient = True target_label.stop_gradient = True target_bbox.stop_gradient = True bbox_inside_weight.stop_gradient = True fg_num.stop_gradient = True cls_logits = nn.reshape(x=cls_logits, shape=(-1, num_classes)) bbox_pred = nn.reshape(x=bbox_pred, shape=(-1, 4)) predicted_cls_logits = nn.gather(cls_logits, score_index) predicted_bbox_pred = nn.gather(bbox_pred, loc_index) return predicted_cls_logits, predicted_bbox_pred, target_label, target_bbox, bbox_inside_weight, fg_num def rpn_target_assign(bbox_pred, cls_logits, anchor_box, anchor_var, gt_boxes, is_crowd, im_info, rpn_batch_size_per_im=256, rpn_straddle_thresh=0.0, rpn_fg_fraction=0.5, rpn_positive_overlap=0.7, rpn_negative_overlap=0.3, use_random=True): """ **Target Assign Layer for region proposal network (RPN) in Faster-RCNN detection.** This layer can be, for given the Intersection-over-Union (IoU) overlap between anchors and ground truth boxes, to assign classification and regression targets to each each anchor, these target labels are used for train RPN. The classification targets is a binary class label (of being an object or not). Following the paper of Faster-RCNN, the positive labels are two kinds of anchors: (i) the anchor/anchors with the highest IoU overlap with a ground-truth box, or (ii) an anchor that has an IoU overlap higher than rpn_positive_overlap(0.7) with any ground-truth box. Note that a single ground-truth box may assign positive labels to multiple anchors. A non-positive anchor is when its IoU ratio is lower than rpn_negative_overlap (0.3) for all ground-truth boxes. Anchors that are neither positive nor negative do not contribute to the training objective. The regression targets are the encoded ground-truth boxes associated with the positive anchors. Args: bbox_pred(Variable): A 3-D Tensor with shape [N, M, 4] represents the predicted locations of M bounding bboxes. N is the batch size, and each bounding box has four coordinate values and the layout is [xmin, ymin, xmax, ymax]. The data type can be float32 or float64. cls_logits(Variable): A 3-D Tensor with shape [N, M, 1] represents the predicted confidence predictions. N is the batch size, 1 is the frontground and background sigmoid, M is number of bounding boxes. The data type can be float32 or float64. anchor_box(Variable): A 2-D Tensor with shape [M, 4] holds M boxes, each box is represented as [xmin, ymin, xmax, ymax], [xmin, ymin] is the left top coordinate of the anchor box, if the input is image feature map, they are close to the origin of the coordinate system. [xmax, ymax] is the right bottom coordinate of the anchor box. The data type can be float32 or float64. anchor_var(Variable): A 2-D Tensor with shape [M,4] holds expanded variances of anchors. The data type can be float32 or float64. gt_boxes (Variable): The ground-truth bounding boxes (bboxes) are a 2D LoDTensor with shape [Ng, 4], Ng is the total number of ground-truth bboxes of mini-batch input. The data type can be float32 or float64. is_crowd (Variable): A 1-D LoDTensor which indicates groud-truth is crowd. The data type must be int32. im_info (Variable): A 2-D LoDTensor with shape [N, 3]. N is the batch size, 3 is the height, width and scale. rpn_batch_size_per_im(int): Total number of RPN examples per image. The data type must be int32. rpn_straddle_thresh(float): Remove RPN anchors that go outside the image by straddle_thresh pixels. The data type must be float32. rpn_fg_fraction(float): Target fraction of RoI minibatch that is labeled foreground (i.e. class > 0), 0-th class is background. The data type must be float32. rpn_positive_overlap(float): Minimum overlap required between an anchor and ground-truth box for the (anchor, gt box) pair to be a positive example. The data type must be float32. rpn_negative_overlap(float): Maximum overlap allowed between an anchor and ground-truth box for the (anchor, gt box) pair to be a negative examples. The data type must be float32. Returns: tuple: A tuple(predicted_scores, predicted_location, target_label, target_bbox, bbox_inside_weight) is returned. The predicted_scores and predicted_location is the predicted result of the RPN. The target_label and target_bbox is the ground truth, respectively. The predicted_location is a 2D Tensor with shape [F, 4], and the shape of target_bbox is same as the shape of the predicted_location, F is the number of the foreground anchors. The predicted_scores is a 2D Tensor with shape [F + B, 1], and the shape of target_label is same as the shape of the predicted_scores, B is the number of the background anchors, the F and B is depends on the input of this operator. Bbox_inside_weight represents whether the predicted loc is fake_fg or not and the shape is [F, 4]. Examples: .. code-block:: python import paddle.fluid as fluid bbox_pred = fluid.data(name='bbox_pred', shape=[None, 4], dtype='float32') cls_logits = fluid.data(name='cls_logits', shape=[None, 1], dtype='float32') anchor_box = fluid.data(name='anchor_box', shape=[None, 4], dtype='float32') anchor_var = fluid.data(name='anchor_var', shape=[None, 4], dtype='float32') gt_boxes = fluid.data(name='gt_boxes', shape=[None, 4], dtype='float32') is_crowd = fluid.data(name='is_crowd', shape=[None], dtype='float32') im_info = fluid.data(name='im_infoss', shape=[None, 3], dtype='float32') loc, score, loc_target, score_target, inside_weight = fluid.layers.rpn_target_assign( bbox_pred, cls_logits, anchor_box, anchor_var, gt_boxes, is_crowd, im_info) """ helper = LayerHelper('rpn_target_assign', **locals()) # Assign target label to anchors loc_index = helper.create_variable_for_type_inference(dtype='int32') score_index = helper.create_variable_for_type_inference(dtype='int32') target_label = helper.create_variable_for_type_inference(dtype='int32') target_bbox = helper.create_variable_for_type_inference( dtype=anchor_box.dtype) bbox_inside_weight = helper.create_variable_for_type_inference( dtype=anchor_box.dtype) helper.append_op( type="rpn_target_assign", inputs={ 'Anchor': anchor_box, 'GtBoxes': gt_boxes, 'IsCrowd': is_crowd, 'ImInfo': im_info }, outputs={ 'LocationIndex': loc_index, 'ScoreIndex': score_index, 'TargetLabel': target_label, 'TargetBBox': target_bbox, 'BBoxInsideWeight': bbox_inside_weight }, attrs={ 'rpn_batch_size_per_im': rpn_batch_size_per_im, 'rpn_straddle_thresh': rpn_straddle_thresh, 'rpn_positive_overlap': rpn_positive_overlap, 'rpn_negative_overlap': rpn_negative_overlap, 'rpn_fg_fraction': rpn_fg_fraction, 'use_random': use_random }) loc_index.stop_gradient = True score_index.stop_gradient = True target_label.stop_gradient = True target_bbox.stop_gradient = True bbox_inside_weight.stop_gradient = True cls_logits = nn.reshape(x=cls_logits, shape=(-1, 1)) bbox_pred = nn.reshape(x=bbox_pred, shape=(-1, 4)) predicted_cls_logits = nn.gather(cls_logits, score_index) predicted_bbox_pred = nn.gather(bbox_pred, loc_index) return predicted_cls_logits, predicted_bbox_pred, target_label, target_bbox, bbox_inside_weight def sigmoid_focal_loss(x, label, fg_num, gamma=2, alpha=0.25): """ **Sigmoid Focal Loss Operator.** `Focal Loss `_ is used to address the foreground-background class imbalance existed on the training phase of many computer vision tasks. This OP computes the sigmoid value for each element in the input tensor :attr:`x`, after which focal loss is measured between the sigmoid value and target label. The focal loss is given as followed: .. math:: \\mathop{loss_{i,\\,j}}\\limits_{i\\in\\mathbb{[0,\\,N-1]},\\,j\\in\\mathbb{[0,\\,C-1]}}=\\left\\{ \\begin{array}{rcl} - \\frac{1}{fg\_num} * \\alpha * {(1 - \\sigma(x_{i,\\,j}))}^{\\gamma} * \\log(\\sigma(x_{i,\\,j})) & & {(j +1) = label_{i,\\,0}} \\\\ - \\frac{1}{fg\_num} * (1 - \\alpha) * {\sigma(x_{i,\\,j})}^{ \\gamma} * \\log(1 - \\sigma(x_{i,\\,j})) & & {(j +1)!= label_{i,\\,0}} \\end{array} \\right. We know that .. math:: \\sigma(x_j) = \\frac{1}{1 + \\exp(-x_j)} Args: x(Variable): A 2-D tensor with shape :math:`[N, C]` represents the predicted categories of all samples. :math:`N` is the number of all samples responsible for optimization in a mini-batch, for example, samples are anchor boxes for object detection and :math:`N` is the total number of positive and negative samples in a mini-batch; Samples are images for image classification and :math:`N` is the number of images in a mini-batch. :math:`C` is the number of classes (**Notice: excluding background**). The data type of :attr:`x` is float32 or float64. label(Variable): A 2-D tensor with shape :math:`[N, 1]` represents the target labels for classification. :math:`N` is the number of all samples responsible for optimization in a mini-batch, each sample has one target category. The values for positive samples are in the range of :math:`[1, C]`, and the values for negative samples are 0. The data type of :attr:`label` is int32. fg_num(Variable): A 1-D tensor with shape [1] represents the number of positive samples in a mini-batch, which should be obtained before this OP. The data type of :attr:`fg_num` is int32. gamma(float): Hyper-parameter to balance the easy and hard examples. Default value is set to 2.0. alpha(float): Hyper-parameter to balance the positive and negative example. Default value is set to 0.25. Returns: Variable(the data type is float32 or float64): A 2-D tensor with shape :math:`[N, C]`, which is the focal loss of each element in the input tensor :attr:`x`. Examples: .. code-block:: python import paddle.fluid as fluid input = fluid.data(name='data', shape=[10,80], dtype='float32') label = fluid.data(name='label', shape=[10,1], dtype='int32') fg_num = fluid.data(name='fg_num', shape=[1], dtype='int32') loss = fluid.layers.sigmoid_focal_loss(x=input, label=label, fg_num=fg_num, gamma=2., alpha=0.25) """ check_variable_and_dtype(x, 'x', ['float32', 'float64'], 'sigmoid_focal_loss') check_variable_and_dtype(label, 'label', ['int32'], 'sigmoid_focal_loss') check_variable_and_dtype(fg_num, 'fg_num', ['int32'], 'sigmoid_focal_loss') helper = LayerHelper("sigmoid_focal_loss", **locals()) out = helper.create_variable_for_type_inference(dtype=x.dtype) helper.append_op( type="sigmoid_focal_loss", inputs={"X": x, "Label": label, "FgNum": fg_num}, attrs={"gamma": gamma, 'alpha': alpha}, outputs={"Out": out}) return out def detection_output(loc, scores, prior_box, prior_box_var, background_label=0, nms_threshold=0.3, nms_top_k=400, keep_top_k=200, score_threshold=0.01, nms_eta=1.0, return_index=False): """ Given the regression locations, classification confidences and prior boxes, calculate the detection outputs by performing following steps: 1. Decode input bounding box predictions according to the prior boxes and regression locations. 2. Get the final detection results by applying multi-class non maximum suppression (NMS). Please note, this operation doesn't clip the final output bounding boxes to the image window. Args: loc(Variable): A 3-D Tensor with shape [N, M, 4] represents the predicted locations of M bounding bboxes. Data type should be float32 or float64. N is the batch size, and each bounding box has four coordinate values and the layout is [xmin, ymin, xmax, ymax]. scores(Variable): A 3-D Tensor with shape [N, M, C] represents the predicted confidence predictions. Data type should be float32 or float64. N is the batch size, C is the class number, M is number of bounding boxes. prior_box(Variable): A 2-D Tensor with shape [M, 4] holds M boxes, each box is represented as [xmin, ymin, xmax, ymax]. Data type should be float32 or float64. prior_box_var(Variable): A 2-D Tensor with shape [M, 4] holds M group of variance. Data type should be float32 or float64. background_label(int): The index of background label, the background label will be ignored. If set to -1, then all categories will be considered. Default: 0. nms_threshold(float): The threshold to be used in NMS. Default: 0.3. nms_top_k(int): Maximum number of detections to be kept according to the confidences after filtering detections based on score_threshold and before NMS. Default: 400. keep_top_k(int): Number of total bboxes to be kept per image after NMS step. -1 means keeping all bboxes after NMS step. Default: 200. score_threshold(float): Threshold to filter out bounding boxes with low confidence score. If not provided, consider all boxes. Default: 0.01. nms_eta(float): The parameter for adaptive NMS. It works only when the value is less than 1.0. Default: 1.0. return_index(bool): Whether return selected index. Default: False Returns: A tuple with two Variables: (Out, Index) if return_index is True, otherwise, a tuple with one Variable(Out) is returned. Out (Variable): The detection outputs is a LoDTensor with shape [No, 6]. Data type is the same as input (loc). Each row has six values: [label, confidence, xmin, ymin, xmax, ymax]. `No` is the total number of detections in this mini-batch. For each instance, the offsets in first dimension are called LoD, the offset number is N + 1, N is the batch size. The i-th image has `LoD[i + 1] - LoD[i]` detected results, if it is 0, the i-th image has no detected results. Index (Variable): Only return when return_index is True. A 2-D LoDTensor with shape [No, 1] represents the selected index which type is Integer. The index is the absolute value cross batches. No is the same number as Out. If the index is used to gather other attribute such as age, one needs to reshape the input(N, M, 1) to (N * M, 1) as first, where N is the batch size and M is the number of boxes. Examples: .. code-block:: python import paddle.fluid as fluid pb = fluid.data(name='prior_box', shape=[10, 4], dtype='float32') pbv = fluid.data(name='prior_box_var', shape=[10, 4], dtype='float32') loc = fluid.data(name='target_box', shape=[2, 21, 4], dtype='float32') scores = fluid.data(name='scores', shape=[2, 21, 10], dtype='float32') nmsed_outs, index = fluid.layers.detection_output(scores=scores, loc=loc, prior_box=pb, prior_box_var=pbv, return_index=True) """ helper = LayerHelper("detection_output", **locals()) decoded_box = box_coder( prior_box=prior_box, prior_box_var=prior_box_var, target_box=loc, code_type='decode_center_size') scores = nn.softmax(input=scores) scores = nn.transpose(scores, perm=[0, 2, 1]) scores.stop_gradient = True nmsed_outs = helper.create_variable_for_type_inference( dtype=decoded_box.dtype) if return_index: index = helper.create_variable_for_type_inference(dtype='int') helper.append_op( type="multiclass_nms2", inputs={'Scores': scores, 'BBoxes': decoded_box}, outputs={'Out': nmsed_outs, 'Index': index}, attrs={ 'background_label': 0, 'nms_threshold': nms_threshold, 'nms_top_k': nms_top_k, 'keep_top_k': keep_top_k, 'score_threshold': score_threshold, 'nms_eta': 1.0, }) index.stop_gradient = True else: helper.append_op( type="multiclass_nms", inputs={'Scores': scores, 'BBoxes': decoded_box}, outputs={'Out': nmsed_outs}, attrs={ 'background_label': 0, 'nms_threshold': nms_threshold, 'nms_top_k': nms_top_k, 'keep_top_k': keep_top_k, 'score_threshold': score_threshold, 'nms_eta': 1.0, }) nmsed_outs.stop_gradient = True if return_index: return nmsed_outs, index return nmsed_outs @templatedoc() def iou_similarity(x, y, box_normalized=True, name=None): """ ${comment} Args: x (Variable): ${x_comment}.The data type is float32 or float64. y (Variable): ${y_comment}.The data type is float32 or float64. box_normalized(bool): Whether treat the priorbox as a normalized box. Set true by default. Returns: Variable: ${out_comment}.The data type is same with x. Examples: .. code-block:: python import numpy as np import paddle.fluid as fluid use_gpu = False place = fluid.CUDAPlace(0) if use_gpu else fluid.CPUPlace() exe = fluid.Executor(place) x = fluid.data(name='x', shape=[None, 4], dtype='float32') y = fluid.data(name='y', shape=[None, 4], dtype='float32') iou = fluid.layers.iou_similarity(x=x, y=y) exe.run(fluid.default_startup_program()) test_program = fluid.default_main_program().clone(for_test=True) [out_iou] = exe.run(test_program, fetch_list=iou, feed={'x': np.array([[0.5, 0.5, 2.0, 2.0], [0., 0., 1.0, 1.0]]).astype('float32'), 'y': np.array([[1.0, 1.0, 2.5, 2.5]]).astype('float32')}) # out_iou is [[0.2857143], # [0. ]] with shape: [2, 1] """ helper = LayerHelper("iou_similarity", **locals()) out = helper.create_variable_for_type_inference(dtype=x.dtype) helper.append_op( type="iou_similarity", inputs={"X": x, "Y": y}, attrs={"box_normalized": box_normalized}, outputs={"Out": out}) return out @templatedoc() def box_coder(prior_box, prior_box_var, target_box, code_type="encode_center_size", box_normalized=True, name=None, axis=0): """ **Box Coder Layer** Encode/Decode the target bounding box with the priorbox information. The Encoding schema described below: .. math:: ox = (tx - px) / pw / pxv oy = (ty - py) / ph / pyv ow = \log(\abs(tw / pw)) / pwv oh = \log(\abs(th / ph)) / phv The Decoding schema described below: .. math:: ox = (pw * pxv * tx * + px) - tw / 2 oy = (ph * pyv * ty * + py) - th / 2 ow = \exp(pwv * tw) * pw + tw / 2 oh = \exp(phv * th) * ph + th / 2 where `tx`, `ty`, `tw`, `th` denote the target box's center coordinates, width and height respectively. Similarly, `px`, `py`, `pw`, `ph` denote the priorbox's (anchor) center coordinates, width and height. `pxv`, `pyv`, `pwv`, `phv` denote the variance of the priorbox and `ox`, `oy`, `ow`, `oh` denote the encoded/decoded coordinates, width and height. During Box Decoding, two modes for broadcast are supported. Say target box has shape [N, M, 4], and the shape of prior box can be [N, 4] or [M, 4]. Then prior box will broadcast to target box along the assigned axis. Args: prior_box(Variable): Box list prior_box is a 2-D Tensor with shape [M, 4] holds M boxes and data type is float32 or float64. Each box is represented as [xmin, ymin, xmax, ymax], [xmin, ymin] is the left top coordinate of the anchor box, if the input is image feature map, they are close to the origin of the coordinate system. [xmax, ymax] is the right bottom coordinate of the anchor box. prior_box_var(List|Variable|None): prior_box_var supports three types of input. One is variable with shape [M, 4] which holds M group and data type is float32 or float64. The second is list consist of 4 elements shared by all boxes and data type is float32 or float64. Other is None and not involved in calculation. target_box(Variable): This input can be a 2-D LoDTensor with shape [N, 4] when code_type is 'encode_center_size'. This input also can be a 3-D Tensor with shape [N, M, 4] when code_type is 'decode_center_size'. Each box is represented as [xmin, ymin, xmax, ymax]. The data type is float32 or float64. This tensor can contain LoD information to represent a batch of inputs. code_type(str): The code type used with the target box. It can be `encode_center_size` or `decode_center_size`. `encode_center_size` by default. box_normalized(bool): Whether treat the priorbox as a normalized box. Set true by default. name(str, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. axis(int): Which axis in PriorBox to broadcast for box decode, for example, if axis is 0 and TargetBox has shape [N, M, 4] and PriorBox has shape [M, 4], then PriorBox will broadcast to [N, M, 4] for decoding. It is only valid when code type is `decode_center_size`. Set 0 by default. Returns: Variable: output_box(Variable): When code_type is 'encode_center_size', the output tensor of box_coder_op with shape [N, M, 4] representing the result of N target boxes encoded with M Prior boxes and variances. When code_type is 'decode_center_size', N represents the batch size and M represents the number of decoded boxes. Examples: .. code-block:: python import paddle.fluid as fluid # For encode prior_box_encode = fluid.data(name='prior_box_encode', shape=[512, 4], dtype='float32') target_box_encode = fluid.data(name='target_box_encode', shape=[81, 4], dtype='float32') output_encode = fluid.layers.box_coder(prior_box=prior_box_encode, prior_box_var=[0.1,0.1,0.2,0.2], target_box=target_box_encode, code_type="encode_center_size") # For decode prior_box_decode = fluid.data(name='prior_box_decode', shape=[512, 4], dtype='float32') target_box_decode = fluid.data(name='target_box_decode', shape=[512, 81, 4], dtype='float32') output_decode = fluid.layers.box_coder(prior_box=prior_box_decode, prior_box_var=[0.1,0.1,0.2,0.2], target_box=target_box_decode, code_type="decode_center_size", box_normalized=False, axis=1) """ helper = LayerHelper("box_coder", **locals()) output_box = helper.create_variable_for_type_inference( dtype=prior_box.dtype) inputs = {"PriorBox": prior_box, "TargetBox": target_box} attrs = { "code_type": code_type, "box_normalized": box_normalized, "axis": axis } if isinstance(prior_box_var, Variable): inputs['PriorBoxVar'] = prior_box_var elif isinstance(prior_box_var, list): attrs['variance'] = prior_box_var else: raise TypeError("Input variance of box_coder must be Variable or lisz") helper.append_op( type="box_coder", inputs=inputs, attrs=attrs, outputs={"OutputBox": output_box}) return output_box @templatedoc() def polygon_box_transform(input, name=None): """ ${comment} Args: input(Variable): The input with shape [batch_size, geometry_channels, height, width]. A Tensor with type float32, float64. name(str, Optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: None. Returns: Variable: The output with the same shape as input. A Tensor with type float32, float64. Examples: .. code-block:: python import paddle.fluid as fluid input = fluid.data(name='input', shape=[4, 10, 5, 5], dtype='float32') out = fluid.layers.polygon_box_transform(input) """ helper = LayerHelper("polygon_box_transform", **locals()) output = helper.create_variable_for_type_inference(dtype=input.dtype) helper.append_op( type="polygon_box_transform", inputs={"Input": input}, attrs={}, outputs={"Output": output}) return output @templatedoc(op_type="yolov3_loss") def yolov3_loss(x, gt_box, gt_label, anchors, anchor_mask, class_num, ignore_thresh, downsample_ratio, gt_score=None, use_label_smooth=True, name=None): """ ${comment} Args: x (Variable): ${x_comment}The data type is float32 or float64. gt_box (Variable): groud truth boxes, should be in shape of [N, B, 4], in the third dimension, x, y, w, h should be stored. x,y is the center coordinate of boxes, w, h are the width and height, x, y, w, h should be divided by input image height to scale to [0, 1]. N is the batch number and B is the max box number in an image.The data type is float32 or float64. gt_label (Variable): class id of ground truth boxes, should be in shape of [N, B].The data type is int32. anchors (list|tuple): ${anchors_comment} anchor_mask (list|tuple): ${anchor_mask_comment} class_num (int): ${class_num_comment} ignore_thresh (float): ${ignore_thresh_comment} downsample_ratio (int): ${downsample_ratio_comment} name (string): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` gt_score (Variable): mixup score of ground truth boxes, should be in shape of [N, B]. Default None. use_label_smooth (bool): ${use_label_smooth_comment} Returns: Variable: A 1-D tensor with shape [N], the value of yolov3 loss Raises: TypeError: Input x of yolov3_loss must be Variable TypeError: Input gtbox of yolov3_loss must be Variable TypeError: Input gtlabel of yolov3_loss must be Variable TypeError: Input gtscore of yolov3_loss must be None or Variable TypeError: Attr anchors of yolov3_loss must be list or tuple TypeError: Attr class_num of yolov3_loss must be an integer TypeError: Attr ignore_thresh of yolov3_loss must be a float number TypeError: Attr use_label_smooth of yolov3_loss must be a bool value Examples: .. code-block:: python import paddle.fluid as fluid x = fluid.data(name='x', shape=[None, 255, 13, 13], dtype='float32') gt_box = fluid.data(name='gt_box', shape=[None, 6, 4], dtype='float32') gt_label = fluid.data(name='gt_label', shape=[None, 6], dtype='int32') gt_score = fluid.data(name='gt_score', shape=[None, 6], dtype='float32') anchors = [10, 13, 16, 30, 33, 23, 30, 61, 62, 45, 59, 119, 116, 90, 156, 198, 373, 326] anchor_mask = [0, 1, 2] loss = fluid.layers.yolov3_loss(x=x, gt_box=gt_box, gt_label=gt_label, gt_score=gt_score, anchors=anchors, anchor_mask=anchor_mask, class_num=80, ignore_thresh=0.7, downsample_ratio=32) """ helper = LayerHelper('yolov3_loss', **locals()) if not isinstance(x, Variable): raise TypeError("Input x of yolov3_loss must be Variable") if not isinstance(gt_box, Variable): raise TypeError("Input gtbox of yolov3_loss must be Variable") if not isinstance(gt_label, Variable): raise TypeError("Input gtlabel of yolov3_loss must be Variable") if gt_score is not None and not isinstance(gt_score, Variable): raise TypeError("Input gtscore of yolov3_loss must be Variable") if not isinstance(anchors, list) and not isinstance(anchors, tuple): raise TypeError("Attr anchors of yolov3_loss must be list or tuple") if not isinstance(anchor_mask, list) and not isinstance(anchor_mask, tuple): raise TypeError("Attr anchor_mask of yolov3_loss must be list or tuple") if not isinstance(class_num, int): raise TypeError("Attr class_num of yolov3_loss must be an integer") if not isinstance(ignore_thresh, float): raise TypeError( "Attr ignore_thresh of yolov3_loss must be a float number") if not isinstance(use_label_smooth, bool): raise TypeError( "Attr use_label_smooth of yolov3_loss must be a bool value") loss = helper.create_variable_for_type_inference(dtype=x.dtype) objectness_mask = helper.create_variable_for_type_inference(dtype='int32') gt_match_mask = helper.create_variable_for_type_inference(dtype='int32') inputs = { "X": x, "GTBox": gt_box, "GTLabel": gt_label, } if gt_score is not None: inputs["GTScore"] = gt_score attrs = { "anchors": anchors, "anchor_mask": anchor_mask, "class_num": class_num, "ignore_thresh": ignore_thresh, "downsample_ratio": downsample_ratio, "use_label_smooth": use_label_smooth, } helper.append_op( type='yolov3_loss', inputs=inputs, outputs={ 'Loss': loss, 'ObjectnessMask': objectness_mask, 'GTMatchMask': gt_match_mask }, attrs=attrs) return loss @templatedoc(op_type="yolo_box") def yolo_box(x, img_size, anchors, class_num, conf_thresh, downsample_ratio, clip_bbox=True, name=None): """ ${comment} Args: x (Variable): ${x_comment} The data type is float32 or float64. img_size (Variable): ${img_size_comment} The data type is int32. anchors (list|tuple): ${anchors_comment} class_num (int): ${class_num_comment} conf_thresh (float): ${conf_thresh_comment} downsample_ratio (int): ${downsample_ratio_comment} clip_bbox (bool): ${clip_bbox_comment} name (string): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: Variable: A 3-D tensor with shape [N, M, 4], the coordinates of boxes, and a 3-D tensor with shape [N, M, :attr:`class_num`], the classification scores of boxes. Raises: TypeError: Input x of yolov_box must be Variable TypeError: Attr anchors of yolo box must be list or tuple TypeError: Attr class_num of yolo box must be an integer TypeError: Attr conf_thresh of yolo box must be a float number Examples: .. code-block:: python import paddle.fluid as fluid x = fluid.data(name='x', shape=[None, 255, 13, 13], dtype='float32') img_size = fluid.data(name='img_size',shape=[None, 2],dtype='int64') anchors = [10, 13, 16, 30, 33, 23] boxes,scores = fluid.layers.yolo_box(x=x, img_size=img_size, class_num=80, anchors=anchors, conf_thresh=0.01, downsample_ratio=32) """ helper = LayerHelper('yolo_box', **locals()) if not isinstance(x, Variable): raise TypeError("Input x of yolo_box must be Variable") if not isinstance(img_size, Variable): raise TypeError("Input img_size of yolo_box must be Variable") if not isinstance(anchors, list) and not isinstance(anchors, tuple): raise TypeError("Attr anchors of yolo_box must be list or tuple") if not isinstance(class_num, int): raise TypeError("Attr class_num of yolo_box must be an integer") if not isinstance(conf_thresh, float): raise TypeError("Attr ignore_thresh of yolo_box must be a float number") boxes = helper.create_variable_for_type_inference(dtype=x.dtype) scores = helper.create_variable_for_type_inference(dtype=x.dtype) attrs = { "anchors": anchors, "class_num": class_num, "conf_thresh": conf_thresh, "downsample_ratio": downsample_ratio, "clip_bbox": clip_bbox, } helper.append_op( type='yolo_box', inputs={ "X": x, "ImgSize": img_size, }, outputs={ 'Boxes': boxes, 'Scores': scores, }, attrs=attrs) return boxes, scores @templatedoc() def detection_map(detect_res, label, class_num, background_label=0, overlap_threshold=0.3, evaluate_difficult=True, has_state=None, input_states=None, out_states=None, ap_version='integral'): """ ${comment} Args: detect_res: ${detect_res_comment} label: ${label_comment} class_num: ${class_num_comment} background_label: ${background_label_comment} overlap_threshold: ${overlap_threshold_comment} evaluate_difficult: ${evaluate_difficult_comment} has_state: ${has_state_comment} input_states: (tuple|None) If not None, It contains 3 elements: (1) pos_count ${pos_count_comment}. (2) true_pos ${true_pos_comment}. (3) false_pos ${false_pos_comment}. out_states: (tuple|None) If not None, it contains 3 elements. (1) accum_pos_count ${accum_pos_count_comment}. (2) accum_true_pos ${accum_true_pos_comment}. (3) accum_false_pos ${accum_false_pos_comment}. ap_version: ${ap_type_comment} Returns: ${map_comment} Examples: .. code-block:: python import paddle.fluid as fluid from fluid.layers import detection detect_res = fluid.data( name='detect_res', shape=[10, 6], dtype='float32') label = fluid.data( name='label', shape=[10, 6], dtype='float32') map_out = detection.detection_map(detect_res, label, 21) """ helper = LayerHelper("detection_map", **locals()) def __create_var(type): return helper.create_variable_for_type_inference(dtype=type) map_out = __create_var('float32') accum_pos_count_out = out_states[ 0] if out_states is not None else __create_var('int32') accum_true_pos_out = out_states[ 1] if out_states is not None else __create_var('float32') accum_false_pos_out = out_states[ 2] if out_states is not None else __create_var('float32') pos_count = input_states[0] if input_states is not None else None true_pos = input_states[1] if input_states is not None else None false_pos = input_states[2] if input_states is not None else None helper.append_op( type="detection_map", inputs={ 'Label': label, 'DetectRes': detect_res, 'HasState': has_state, 'PosCount': pos_count, 'TruePos': true_pos, 'FalsePos': false_pos }, outputs={ 'MAP': map_out, 'AccumPosCount': accum_pos_count_out, 'AccumTruePos': accum_true_pos_out, 'AccumFalsePos': accum_false_pos_out }, attrs={ 'overlap_threshold': overlap_threshold, 'evaluate_difficult': evaluate_difficult, 'ap_type': ap_version, 'class_num': class_num, }) return map_out def bipartite_match(dist_matrix, match_type=None, dist_threshold=None, name=None): """ This operator implements a greedy bipartite matching algorithm, which is used to obtain the matching with the maximum distance based on the input distance matrix. For input 2D matrix, the bipartite matching algorithm can find the matched column for each row (matched means the largest distance), also can find the matched row for each column. And this operator only calculate matched indices from column to row. For each instance, the number of matched indices is the column number of the input distance matrix. **The OP only supports CPU**. There are two outputs, matched indices and distance. A simple description, this algorithm matched the best (maximum distance) row entity to the column entity and the matched indices are not duplicated in each row of ColToRowMatchIndices. If the column entity is not matched any row entity, set -1 in ColToRowMatchIndices. NOTE: the input DistMat can be LoDTensor (with LoD) or Tensor. If LoDTensor with LoD, the height of ColToRowMatchIndices is batch size. If Tensor, the height of ColToRowMatchIndices is 1. NOTE: This API is a very low level API. It is used by :code:`ssd_loss` layer. Please consider to use :code:`ssd_loss` instead. Args: dist_matrix(Variable): This input is a 2-D LoDTensor with shape [K, M]. The data type is float32 or float64. It is pair-wise distance matrix between the entities represented by each row and each column. For example, assumed one entity is A with shape [K], another entity is B with shape [M]. The dist_matrix[i][j] is the distance between A[i] and B[j]. The bigger the distance is, the better matching the pairs are. NOTE: This tensor can contain LoD information to represent a batch of inputs. One instance of this batch can contain different numbers of entities. match_type(str, optional): The type of matching method, should be 'bipartite' or 'per_prediction'. None ('bipartite') by default. dist_threshold(float32, optional): If `match_type` is 'per_prediction', this threshold is to determine the extra matching bboxes based on the maximum distance, 0.5 by default. name(str, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. Returns: Tuple: matched_indices(Variable): A 2-D Tensor with shape [N, M]. The data type is int32. N is the batch size. If match_indices[i][j] is -1, it means B[j] does not match any entity in i-th instance. Otherwise, it means B[j] is matched to row match_indices[i][j] in i-th instance. The row number of i-th instance is saved in match_indices[i][j]. matched_distance(Variable): A 2-D Tensor with shape [N, M]. The data type is float32. N is batch size. If match_indices[i][j] is -1, match_distance[i][j] is also -1.0. Otherwise, assumed match_distance[i][j] = d, and the row offsets of each instance are called LoD. Then match_distance[i][j] = dist_matrix[d+LoD[i]][j]. Examples: >>> import paddle.fluid as fluid >>> x = fluid.data(name='x', shape=[None, 4], dtype='float32') >>> y = fluid.data(name='y', shape=[None, 4], dtype='float32') >>> iou = fluid.layers.iou_similarity(x=x, y=y) >>> matched_indices, matched_dist = fluid.layers.bipartite_match(iou) """ helper = LayerHelper('bipartite_match', **locals()) match_indices = helper.create_variable_for_type_inference(dtype='int32') match_distance = helper.create_variable_for_type_inference( dtype=dist_matrix.dtype) helper.append_op( type='bipartite_match', inputs={'DistMat': dist_matrix}, attrs={ 'match_type': match_type, 'dist_threshold': dist_threshold, }, outputs={ 'ColToRowMatchIndices': match_indices, 'ColToRowMatchDist': match_distance }) return match_indices, match_distance def target_assign(input, matched_indices, negative_indices=None, mismatch_value=None, name=None): """ This operator can be, for given the target bounding boxes or labels, to assign classification and regression targets to each prediction as well as weights to prediction. The weights is used to specify which prediction would not contribute to training loss. For each instance, the output `out` and`out_weight` are assigned based on `match_indices` and `negative_indices`. Assumed that the row offset for each instance in `input` is called lod, this operator assigns classification/regression targets by performing the following steps: 1. Assigning all outputs based on `match_indices`: .. code-block:: text If id = match_indices[i][j] > 0, out[i][j][0 : K] = X[lod[i] + id][j % P][0 : K] out_weight[i][j] = 1. Otherwise, out[j][j][0 : K] = {mismatch_value, mismatch_value, ...} out_weight[i][j] = 0. 2. Assigning outputs based on `neg_indices` if `neg_indices` is provided: Assumed that i-th instance in `neg_indices` is called `neg_indice`, for i-th instance: .. code-block:: text for id in neg_indice: out[i][id][0 : K] = {mismatch_value, mismatch_value, ...} out_weight[i][id] = 1.0 Args: input (Variable): This input is a 3D LoDTensor with shape [M, P, K]. Data type should be int32 or float32. matched_indices (Variable): The input matched indices is 2D Tenosr with shape [N, P], If MatchIndices[i][j] is -1, the j-th entity of column is not matched to any entity of row in i-th instance. negative_indices (Variable, optional): The input negative example indices are an optional input with shape [Neg, 1] and int32 type, where Neg is the total number of negative example indices. mismatch_value (float32, optional): Fill this value to the mismatched location. name (string): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: tuple: A tuple(out, out_weight) is returned. out (Variable): a 3D Tensor with shape [N, P, K] and same data type with `input`, N and P is the same as they are in `matched_indices`, K is the same as it in input of X. out_weight (Variable): the weight for output with the shape of [N, P, 1]. Data type is float32. Examples: .. code-block:: python import paddle.fluid as fluid x = fluid.data( name='x', shape=[4, 20, 4], dtype='float', lod_level=1) matched_id = fluid.data( name='indices', shape=[8, 20], dtype='int32') trg, trg_weight = fluid.layers.target_assign( x, matched_id, mismatch_value=0) """ helper = LayerHelper('target_assign', **locals()) out = helper.create_variable_for_type_inference(dtype=input.dtype) out_weight = helper.create_variable_for_type_inference(dtype='float32') helper.append_op( type='target_assign', inputs={ 'X': input, 'MatchIndices': matched_indices, 'NegIndices': negative_indices }, outputs={'Out': out, 'OutWeight': out_weight}, attrs={'mismatch_value': mismatch_value}) return out, out_weight def ssd_loss(location, confidence, gt_box, gt_label, prior_box, prior_box_var=None, background_label=0, overlap_threshold=0.5, neg_pos_ratio=3.0, neg_overlap=0.5, loc_loss_weight=1.0, conf_loss_weight=1.0, match_type='per_prediction', mining_type='max_negative', normalize=True, sample_size=None): """ **Multi-box loss layer for object detection algorithm of SSD** This layer is to compute detection loss for SSD given the location offset predictions, confidence predictions, prior boxes and ground-truth bounding boxes and labels, and the type of hard example mining. The returned loss is a weighted sum of the localization loss (or regression loss) and confidence loss (or classification loss) by performing the following steps: 1. Find matched bounding box by bipartite matching algorithm. 1.1 Compute IOU similarity between ground-truth boxes and prior boxes. 1.2 Compute matched bounding box by bipartite matching algorithm. 2. Compute confidence for mining hard examples 2.1. Get the target label based on matched indices. 2.2. Compute confidence loss. 3. Apply hard example mining to get the negative example indices and update the matched indices. 4. Assign classification and regression targets 4.1. Encoded bbox according to the prior boxes. 4.2. Assign regression targets. 4.3. Assign classification targets. 5. Compute the overall objective loss. 5.1 Compute confidence loss. 5.2 Compute localization loss. 5.3 Compute the overall weighted loss. Args: location (Variable): The location predictions are a 3D Tensor with shape [N, Np, 4], N is the batch size, Np is total number of predictions for each instance. 4 is the number of coordinate values, the layout is [xmin, ymin, xmax, ymax].The data type is float32 or float64. confidence (Variable): The confidence predictions are a 3D Tensor with shape [N, Np, C], N and Np are the same as they are in `location`, C is the class number.The data type is float32 or float64. gt_box (Variable): The ground-truth bounding boxes (bboxes) are a 2D LoDTensor with shape [Ng, 4], Ng is the total number of ground-truth bboxes of mini-batch input.The data type is float32 or float64. gt_label (Variable): The ground-truth labels are a 2D LoDTensor with shape [Ng, 1].Ng is the total number of ground-truth bboxes of mini-batch input, 1 is the number of class. The data type is float32 or float64. prior_box (Variable): The prior boxes are a 2D Tensor with shape [Np, 4]. Np and 4 are the same as they are in `location`. The data type is float32 or float64. prior_box_var (Variable): The variance of prior boxes are a 2D Tensor with shape [Np, 4]. Np and 4 are the same as they are in `prior_box` background_label (int): The index of background label, 0 by default. overlap_threshold (float): If match_type is 'per_prediction', use 'overlap_threshold' to determine the extra matching bboxes when finding \ matched boxes. 0.5 by default. neg_pos_ratio (float): The ratio of the negative boxes to the positive boxes, used only when mining_type is 'max_negative', 3.0 by default. neg_overlap (float): The negative overlap upper bound for the unmatched predictions. Use only when mining_type is 'max_negative', 0.5 by default. loc_loss_weight (float): Weight for localization loss, 1.0 by default. conf_loss_weight (float): Weight for confidence loss, 1.0 by default. match_type (str): The type of matching method during training, should be 'bipartite' or 'per_prediction', 'per_prediction' by default. mining_type (str): The hard example mining type, should be 'hard_example' or 'max_negative', now only support `max_negative`. normalize (bool): Whether to normalize the SSD loss by the total number of output locations, True by default. sample_size (int): The max sample size of negative box, used only when mining_type is 'hard_example'. Returns: Variable(Tensor): The weighted sum of the localization loss and confidence loss, \ with shape [N * Np, 1], N and Np are the same as they are in `location`.The data type is float32 or float64. Raises: ValueError: If mining_type is 'hard_example', now only support mining \ type of `max_negative`. Examples: .. code-block:: python import paddle.fluid as fluid pb = fluid.data( name='prior_box', shape=[10, 4], dtype='float32') pbv = fluid.data( name='prior_box_var', shape=[10, 4], dtype='float32') loc = fluid.data(name='target_box', shape=[10, 4], dtype='float32') scores = fluid.data(name='scores', shape=[10, 21], dtype='float32') gt_box = fluid.data( name='gt_box', shape=[4], lod_level=1, dtype='float32') gt_label = fluid.data( name='gt_label', shape=[1], lod_level=1, dtype='float32') loss = fluid.layers.ssd_loss(loc, scores, gt_box, gt_label, pb, pbv) """ helper = LayerHelper('ssd_loss', **locals()) if mining_type != 'max_negative': raise ValueError("Only support mining_type == max_negative now.") num, num_prior, num_class = confidence.shape conf_shape = nn.shape(confidence) def __reshape_to_2d(var): return nn.flatten(x=var, axis=2) # 1. Find matched bounding box by prior box. # 1.1 Compute IOU similarity between ground-truth boxes and prior boxes. iou = iou_similarity(x=gt_box, y=prior_box) # 1.2 Compute matched bounding box by bipartite matching algorithm. matched_indices, matched_dist = bipartite_match(iou, match_type, overlap_threshold) # 2. Compute confidence for mining hard examples # 2.1. Get the target label based on matched indices gt_label = nn.reshape( x=gt_label, shape=(len(gt_label.shape) - 1) * (0, ) + (-1, 1)) gt_label.stop_gradient = True target_label, _ = target_assign( gt_label, matched_indices, mismatch_value=background_label) # 2.2. Compute confidence loss. # Reshape confidence to 2D tensor. confidence = __reshape_to_2d(confidence) target_label = tensor.cast(x=target_label, dtype='int64') target_label = __reshape_to_2d(target_label) target_label.stop_gradient = True conf_loss = softmax_with_cross_entropy(confidence, target_label) # 3. Mining hard examples actual_shape = nn.slice(conf_shape, axes=[0], starts=[0], ends=[2]) actual_shape.stop_gradient = True # shape=(-1, 0) is set for compile-time, the correct shape is set by # actual_shape in runtime. conf_loss = nn.reshape( x=conf_loss, shape=(-1, 0), actual_shape=actual_shape) conf_loss.stop_gradient = True neg_indices = helper.create_variable_for_type_inference(dtype='int32') dtype = matched_indices.dtype updated_matched_indices = helper.create_variable_for_type_inference( dtype=dtype) helper.append_op( type='mine_hard_examples', inputs={ 'ClsLoss': conf_loss, 'LocLoss': None, 'MatchIndices': matched_indices, 'MatchDist': matched_dist, }, outputs={ 'NegIndices': neg_indices, 'UpdatedMatchIndices': updated_matched_indices }, attrs={ 'neg_pos_ratio': neg_pos_ratio, 'neg_dist_threshold': neg_overlap, 'mining_type': mining_type, 'sample_size': sample_size, }) # 4. Assign classification and regression targets # 4.1. Encoded bbox according to the prior boxes. encoded_bbox = box_coder( prior_box=prior_box, prior_box_var=prior_box_var, target_box=gt_box, code_type='encode_center_size') # 4.2. Assign regression targets target_bbox, target_loc_weight = target_assign( encoded_bbox, updated_matched_indices, mismatch_value=background_label) # 4.3. Assign classification targets target_label, target_conf_weight = target_assign( gt_label, updated_matched_indices, negative_indices=neg_indices, mismatch_value=background_label) # 5. Compute loss. # 5.1 Compute confidence loss. target_label = __reshape_to_2d(target_label) target_label = tensor.cast(x=target_label, dtype='int64') conf_loss = softmax_with_cross_entropy(confidence, target_label) target_conf_weight = __reshape_to_2d(target_conf_weight) conf_loss = conf_loss * target_conf_weight # the target_label and target_conf_weight do not have gradient. target_label.stop_gradient = True target_conf_weight.stop_gradient = True # 5.2 Compute regression loss. location = __reshape_to_2d(location) target_bbox = __reshape_to_2d(target_bbox) loc_loss = nn.smooth_l1(location, target_bbox) target_loc_weight = __reshape_to_2d(target_loc_weight) loc_loss = loc_loss * target_loc_weight # the target_bbox and target_loc_weight do not have gradient. target_bbox.stop_gradient = True target_loc_weight.stop_gradient = True # 5.3 Compute overall weighted loss. loss = conf_loss_weight * conf_loss + loc_loss_weight * loc_loss # reshape to [N, Np], N is the batch size and Np is the prior box number. # shape=(-1, 0) is set for compile-time, the correct shape is set by # actual_shape in runtime. loss = nn.reshape(x=loss, shape=(-1, 0), actual_shape=actual_shape) loss = nn.reduce_sum(loss, dim=1, keep_dim=True) if normalize: normalizer = nn.reduce_sum(target_loc_weight) loss = loss / normalizer return loss def prior_box(input, image, min_sizes, max_sizes=None, aspect_ratios=[1.], variance=[0.1, 0.1, 0.2, 0.2], flip=False, clip=False, steps=[0.0, 0.0], offset=0.5, name=None, min_max_aspect_ratios_order=False): """ This op generates prior boxes for SSD(Single Shot MultiBox Detector) algorithm. Each position of the input produce N prior boxes, N is determined by the count of min_sizes, max_sizes and aspect_ratios, The size of the box is in range(min_size, max_size) interval, which is generated in sequence according to the aspect_ratios. Parameters: input(Variable): 4-D tensor(NCHW), the data type should be float32 or float64. image(Variable): 4-D tensor(NCHW), the input image data of PriorBoxOp, the data type should be float32 or float64. min_sizes(list|tuple|float): the min sizes of generated prior boxes. max_sizes(list|tuple|None): the max sizes of generated prior boxes. Default: None. aspect_ratios(list|tuple|float): the aspect ratios of generated prior boxes. Default: [1.]. variance(list|tuple): the variances to be encoded in prior boxes. Default:[0.1, 0.1, 0.2, 0.2]. flip(bool): Whether to flip aspect ratios. Default:False. clip(bool): Whether to clip out-of-boundary boxes. Default: False. step(list|tuple): Prior boxes step across width and height, If step[0] equals to 0.0 or step[1] equals to 0.0, the prior boxes step across height or weight of the input will be automatically calculated. Default: [0., 0.] offset(float): Prior boxes center offset. Default: 0.5 min_max_aspect_ratios_order(bool): If set True, the output prior box is in order of [min, max, aspect_ratios], which is consistent with Caffe. Please note, this order affects the weights order of convolution layer followed by and does not affect the final detection results. Default: False. name(str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: Tuple: A tuple with two Variable (boxes, variances) boxes(Variable): the output prior boxes of PriorBox. 4-D tensor, the layout is [H, W, num_priors, 4]. H is the height of input, W is the width of input, num_priors is the total box count of each position of input. variances(Variable): the expanded variances of PriorBox. 4-D tensor, the layput is [H, W, num_priors, 4]. H is the height of input, W is the width of input num_priors is the total box count of each position of input Examples: .. code-block:: python #declarative mode import paddle.fluid as fluid import numpy as np input = fluid.data(name="input", shape=[None,3,6,9]) image = fluid.data(name="image", shape=[None,3,9,12]) box, var = fluid.layers.prior_box( input=input, image=image, min_sizes=[100.], clip=True, flip=True) place = fluid.CPUPlace() exe = fluid.Executor(place) exe.run(fluid.default_startup_program()) # prepare a batch of data input_data = np.random.rand(1,3,6,9).astype("float32") image_data = np.random.rand(1,3,9,12).astype("float32") box_out, var_out = exe.run(fluid.default_main_program(), feed={"input":input_data,"image":image_data}, fetch_list=[box,var], return_numpy=True) # print(box_out.shape) # (6, 9, 1, 4) # print(var_out.shape) # (6, 9, 1, 4) # imperative mode import paddle.fluid.dygraph as dg with dg.guard(place) as g: input = dg.to_variable(input_data) image = dg.to_variable(image_data) box, var = fluid.layers.prior_box( input=input, image=image, min_sizes=[100.], clip=True, flip=True) # print(box.shape) # [6L, 9L, 1L, 4L] # print(var.shape) # [6L, 9L, 1L, 4L] """ helper = LayerHelper("prior_box", **locals()) dtype = helper.input_dtype() def _is_list_or_tuple_(data): return (isinstance(data, list) or isinstance(data, tuple)) if not _is_list_or_tuple_(min_sizes): min_sizes = [min_sizes] if not _is_list_or_tuple_(aspect_ratios): aspect_ratios = [aspect_ratios] if not (_is_list_or_tuple_(steps) and len(steps) == 2): raise ValueError('steps should be a list or tuple ', 'with length 2, (step_width, step_height).') min_sizes = list(map(float, min_sizes)) aspect_ratios = list(map(float, aspect_ratios)) steps = list(map(float, steps)) attrs = { 'min_sizes': min_sizes, 'aspect_ratios': aspect_ratios, 'variances': variance, 'flip': flip, 'clip': clip, 'step_w': steps[0], 'step_h': steps[1], 'offset': offset, 'min_max_aspect_ratios_order': min_max_aspect_ratios_order } if max_sizes is not None and len(max_sizes) > 0 and max_sizes[0] > 0: if not _is_list_or_tuple_(max_sizes): max_sizes = [max_sizes] attrs['max_sizes'] = max_sizes box = helper.create_variable_for_type_inference(dtype) var = helper.create_variable_for_type_inference(dtype) helper.append_op( type="prior_box", inputs={"Input": input, "Image": image}, outputs={"Boxes": box, "Variances": var}, attrs=attrs, ) box.stop_gradient = True var.stop_gradient = True return box, var def density_prior_box(input, image, densities=None, fixed_sizes=None, fixed_ratios=None, variance=[0.1, 0.1, 0.2, 0.2], clip=False, steps=[0.0, 0.0], offset=0.5, flatten_to_2d=False, name=None): """ This op generates density prior boxes for SSD(Single Shot MultiBox Detector) algorithm. Each position of the input produce N prior boxes, N is determined by the count of densities, fixed_sizes and fixed_ratios. Boxes center at grid points around each input position is generated by this operator, and the grid points is determined by densities and the count of density prior box is determined by fixed_sizes and fixed_ratios. Obviously, the number of fixed_sizes is equal to the number of densities. For densities_i in densities: .. math:: N\_density_prior\_box = SUM(N\_fixed\_ratios * densities\_i^2) N_density_prior_box is the number of density_prior_box and N_fixed_ratios is the number of fixed_ratios. Parameters: input(Variable): 4-D tensor(NCHW), the data type should be float32 of float64. image(Variable): 4-D tensor(NCHW), the input image data of PriorBoxOp, the data type should be float32 or float64. the layout is NCHW. densities(list|tuple|None): The densities of generated density prior boxes, this attribute should be a list or tuple of integers. Default: None. fixed_sizes(list|tuple|None): The fixed sizes of generated density prior boxes, this attribute should a list or tuple of same length with :attr:`densities`. Default: None. fixed_ratios(list|tuple|None): The fixed ratios of generated density prior boxes, if this attribute is not set and :attr:`densities` and :attr:`fix_sizes` is set, :attr:`aspect_ratios` will be used to generate density prior boxes. variance(list|tuple): The variances to be encoded in density prior boxes. Default:[0.1, 0.1, 0.2, 0.2]. clip(bool): Whether to clip out of boundary boxes. Default: False. step(list|tuple): Prior boxes step across width and height, If step[0] equals 0.0 or step[1] equals 0.0, the density prior boxes step across height or weight of the input will be automatically calculated. Default: [0., 0.] offset(float): Prior boxes center offset. Default: 0.5 flatten_to_2d(bool): Whether to flatten output prior boxes and variance to 2D shape, the second dim is 4. Default: False. name(str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: Tuple: A tuple with two Variable (boxes, variances) boxes: the output density prior boxes of PriorBox. 4-D tensor, the layout is [H, W, num_priors, 4] when flatten_to_2d is False. 2-D tensor, the layout is [H * W * num_priors, 4] when flatten_to_2d is True. H is the height of input, W is the width of input, and num_priors is the total box count of each position of input. variances: the expanded variances of PriorBox. 4-D tensor, the layout is [H, W, num_priors, 4] when flatten_to_2d is False. 2-D tensor, the layout is [H * W * num_priors, 4] when flatten_to_2d is True. H is the height of input, W is the width of input, and num_priors is the total box count of each position of input. Examples: .. code-block:: python #declarative mode import paddle.fluid as fluid import numpy as np input = fluid.data(name="input", shape=[None,3,6,9]) image = fluid.data(name="image", shape=[None,3,9,12]) box, var = fluid.layers.density_prior_box( input=input, image=image, densities=[4, 2, 1], fixed_sizes=[32.0, 64.0, 128.0], fixed_ratios=[1.], clip=True, flatten_to_2d=True) place = fluid.CPUPlace() exe = fluid.Executor(place) exe.run(fluid.default_startup_program()) # prepare a batch of data input_data = np.random.rand(1,3,6,9).astype("float32") image_data = np.random.rand(1,3,9,12).astype("float32") box_out, var_out = exe.run( fluid.default_main_program(), feed={"input":input_data, "image":image_data}, fetch_list=[box,var], return_numpy=True) # print(box_out.shape) # (1134, 4) # print(var_out.shape) # (1134, 4) #imperative mode import paddle.fluid.dygraph as dg with dg.guard(place) as g: input = dg.to_variable(input_data) image = dg.to_variable(image_data) box, var = fluid.layers.density_prior_box( input=input, image=image, densities=[4, 2, 1], fixed_sizes=[32.0, 64.0, 128.0], fixed_ratios=[1.], clip=True) # print(box.shape) # [6L, 9L, 21L, 4L] # print(var.shape) # [6L, 9L, 21L, 4L] """ helper = LayerHelper("density_prior_box", **locals()) dtype = helper.input_dtype() def _is_list_or_tuple_(data): return (isinstance(data, list) or isinstance(data, tuple)) if not _is_list_or_tuple_(densities): raise TypeError('densities should be a list or a tuple or None.') if not _is_list_or_tuple_(fixed_sizes): raise TypeError('fixed_sizes should be a list or a tuple or None.') if not _is_list_or_tuple_(fixed_ratios): raise TypeError('fixed_ratios should be a list or a tuple or None.') if len(densities) != len(fixed_sizes): raise ValueError('densities and fixed_sizes length should be euqal.') if not (_is_list_or_tuple_(steps) and len(steps) == 2): raise ValueError('steps should be a list or tuple ', 'with length 2, (step_width, step_height).') densities = list(map(int, densities)) fixed_sizes = list(map(float, fixed_sizes)) fixed_ratios = list(map(float, fixed_ratios)) steps = list(map(float, steps)) attrs = { 'variances': variance, 'clip': clip, 'step_w': steps[0], 'step_h': steps[1], 'offset': offset, 'densities': densities, 'fixed_sizes': fixed_sizes, 'fixed_ratios': fixed_ratios, 'flatten_to_2d': flatten_to_2d, } box = helper.create_variable_for_type_inference(dtype) var = helper.create_variable_for_type_inference(dtype) helper.append_op( type="density_prior_box", inputs={"Input": input, "Image": image}, outputs={"Boxes": box, "Variances": var}, attrs=attrs, ) box.stop_gradient = True var.stop_gradient = True return box, var def multi_box_head(inputs, image, base_size, num_classes, aspect_ratios, min_ratio=None, max_ratio=None, min_sizes=None, max_sizes=None, steps=None, step_w=None, step_h=None, offset=0.5, variance=[0.1, 0.1, 0.2, 0.2], flip=True, clip=False, kernel_size=1, pad=0, stride=1, name=None, min_max_aspect_ratios_order=False): """ Base on SSD ((Single Shot MultiBox Detector) algorithm, generate prior boxes, regression location and classification confidence on multiple input feature maps, then output the concatenate results. The details of this algorithm, please refer the section 2.2 of SSD paper `SSD: Single Shot MultiBox Detector `_ . Args: inputs (list(Variable)|tuple(Variable)): The list of input variables, the format of all Variables are 4-D Tensor, layout is NCHW. Data type should be float32 or float64. image (Variable): The input image, layout is NCHW. Data type should be the same as inputs. base_size(int): the base_size is input image size. When len(inputs) > 2 and `min_size` and `max_size` are None, the `min_size` and `max_size` are calculated by `baze_size`, 'min_ratio' and `max_ratio`. The formula is as follows: .. code-block:: text min_sizes = [] max_sizes = [] step = int(math.floor(((max_ratio - min_ratio)) / (num_layer - 2))) for ratio in six.moves.range(min_ratio, max_ratio + 1, step): min_sizes.append(base_size * ratio / 100.) max_sizes.append(base_size * (ratio + step) / 100.) min_sizes = [base_size * .10] + min_sizes max_sizes = [base_size * .20] + max_sizes num_classes(int): The number of classes. aspect_ratios(list(float) | tuple(float)): the aspect ratios of generated prior boxes. The length of input and aspect_ratios must be equal. min_ratio(int): the min ratio of generated prior boxes. max_ratio(int): the max ratio of generated prior boxes. min_sizes(list|tuple|None): If `len(inputs) <=2`, min_sizes must be set up, and the length of min_sizes should equal to the length of inputs. Default: None. max_sizes(list|tuple|None): If `len(inputs) <=2`, max_sizes must be set up, and the length of min_sizes should equal to the length of inputs. Default: None. steps(list|tuple): If step_w and step_h are the same, step_w and step_h can be replaced by steps. step_w(list|tuple): Prior boxes step across width. If step_w[i] == 0.0, the prior boxes step across width of the inputs[i] will be automatically calculated. Default: None. step_h(list|tuple): Prior boxes step across height, If step_h[i] == 0.0, the prior boxes step across height of the inputs[i] will be automatically calculated. Default: None. offset(float): Prior boxes center offset. Default: 0.5 variance(list|tuple): the variances to be encoded in prior boxes. Default:[0.1, 0.1, 0.2, 0.2]. flip(bool): Whether to flip aspect ratios. Default:False. clip(bool): Whether to clip out-of-boundary boxes. Default: False. kernel_size(int): The kernel size of conv2d. Default: 1. pad(int|list|tuple): The padding of conv2d. Default:0. stride(int|list|tuple): The stride of conv2d. Default:1, name(str): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. min_max_aspect_ratios_order(bool): If set True, the output prior box is in order of [min, max, aspect_ratios], which is consistent with Caffe. Please note, this order affects the weights order of convolution layer followed by and does not affect the final detection results. Default: False. Returns: tuple: A tuple with four Variables. (mbox_loc, mbox_conf, boxes, variances) mbox_loc (Variable): The predicted boxes' location of the inputs. The layout is [N, num_priors, 4], where N is batch size, ``num_priors`` is the number of prior boxes. Data type is the same as input. mbox_conf (Variable): The predicted boxes' confidence of the inputs. The layout is [N, num_priors, C], where ``N`` and ``num_priors`` has the same meaning as above. C is the number of Classes. Data type is the same as input. boxes (Variable): the output prior boxes. The layout is [num_priors, 4]. The meaning of num_priors is the same as above. Data type is the same as input. variances (Variable): the expanded variances for prior boxes. The layout is [num_priors, 4]. Data type is the same as input. Examples 1: set min_ratio and max_ratio: .. code-block:: python import paddle.fluid as fluid images = fluid.data(name='data', shape=[None, 3, 300, 300], dtype='float32') conv1 = fluid.data(name='conv1', shape=[None, 512, 19, 19], dtype='float32') conv2 = fluid.data(name='conv2', shape=[None, 1024, 10, 10], dtype='float32') conv3 = fluid.data(name='conv3', shape=[None, 512, 5, 5], dtype='float32') conv4 = fluid.data(name='conv4', shape=[None, 256, 3, 3], dtype='float32') conv5 = fluid.data(name='conv5', shape=[None, 256, 2, 2], dtype='float32') conv6 = fluid.data(name='conv6', shape=[None, 128, 1, 1], dtype='float32') mbox_locs, mbox_confs, box, var = fluid.layers.multi_box_head( inputs=[conv1, conv2, conv3, conv4, conv5, conv6], image=images, num_classes=21, min_ratio=20, max_ratio=90, aspect_ratios=[[2.], [2., 3.], [2., 3.], [2., 3.], [2.], [2.]], base_size=300, offset=0.5, flip=True, clip=True) Examples 2: set min_sizes and max_sizes: .. code-block:: python import paddle.fluid as fluid images = fluid.data(name='data', shape=[None, 3, 300, 300], dtype='float32') conv1 = fluid.data(name='conv1', shape=[None, 512, 19, 19], dtype='float32') conv2 = fluid.data(name='conv2', shape=[None, 1024, 10, 10], dtype='float32') conv3 = fluid.data(name='conv3', shape=[None, 512, 5, 5], dtype='float32') conv4 = fluid.data(name='conv4', shape=[None, 256, 3, 3], dtype='float32') conv5 = fluid.data(name='conv5', shape=[None, 256, 2, 2], dtype='float32') conv6 = fluid.data(name='conv6', shape=[None, 128, 1, 1], dtype='float32') mbox_locs, mbox_confs, box, var = fluid.layers.multi_box_head( inputs=[conv1, conv2, conv3, conv4, conv5, conv6], image=images, num_classes=21, min_sizes=[60.0, 105.0, 150.0, 195.0, 240.0, 285.0], max_sizes=[[], 150.0, 195.0, 240.0, 285.0, 300.0], aspect_ratios=[[2.], [2., 3.], [2., 3.], [2., 3.], [2.], [2.]], base_size=300, offset=0.5, flip=True, clip=True) """ def _reshape_with_axis_(input, axis=1): out = nn.flatten(x=input, axis=axis) return out def _is_list_or_tuple_(data): return (isinstance(data, list) or isinstance(data, tuple)) def _is_list_or_tuple_and_equal(data, length, err_info): if not (_is_list_or_tuple_(data) and len(data) == length): raise ValueError(err_info) if not _is_list_or_tuple_(inputs): raise ValueError('inputs should be a list or tuple.') num_layer = len(inputs) if num_layer <= 2: assert min_sizes is not None and max_sizes is not None assert len(min_sizes) == num_layer and len(max_sizes) == num_layer elif min_sizes is None and max_sizes is None: min_sizes = [] max_sizes = [] step = int(math.floor(((max_ratio - min_ratio)) / (num_layer - 2))) for ratio in six.moves.range(min_ratio, max_ratio + 1, step): min_sizes.append(base_size * ratio / 100.) max_sizes.append(base_size * (ratio + step) / 100.) min_sizes = [base_size * .10] + min_sizes max_sizes = [base_size * .20] + max_sizes if aspect_ratios: _is_list_or_tuple_and_equal( aspect_ratios, num_layer, 'aspect_ratios should be list or tuple, and the length of inputs ' 'and aspect_ratios should be the same.') if step_h is not None: _is_list_or_tuple_and_equal( step_h, num_layer, 'step_h should be list or tuple, and the length of inputs and ' 'step_h should be the same.') if step_w is not None: _is_list_or_tuple_and_equal( step_w, num_layer, 'step_w should be list or tuple, and the length of inputs and ' 'step_w should be the same.') if steps is not None: _is_list_or_tuple_and_equal( steps, num_layer, 'steps should be list or tuple, and the length of inputs and ' 'step_w should be the same.') step_w = steps step_h = steps mbox_locs = [] mbox_confs = [] box_results = [] var_results = [] for i, input in enumerate(inputs): min_size = min_sizes[i] max_size = max_sizes[i] if not _is_list_or_tuple_(min_size): min_size = [min_size] if not _is_list_or_tuple_(max_size): max_size = [max_size] aspect_ratio = [] if aspect_ratios is not None: aspect_ratio = aspect_ratios[i] if not _is_list_or_tuple_(aspect_ratio): aspect_ratio = [aspect_ratio] step = [step_w[i] if step_w else 0.0, step_h[i] if step_w else 0.0] box, var = prior_box(input, image, min_size, max_size, aspect_ratio, variance, flip, clip, step, offset, None, min_max_aspect_ratios_order) box_results.append(box) var_results.append(var) num_boxes = box.shape[2] # get loc num_loc_output = num_boxes * 4 mbox_loc = nn.conv2d( input=input, num_filters=num_loc_output, filter_size=kernel_size, padding=pad, stride=stride) mbox_loc = nn.transpose(mbox_loc, perm=[0, 2, 3, 1]) mbox_loc_flatten = nn.flatten(mbox_loc, axis=1) mbox_locs.append(mbox_loc_flatten) # get conf num_conf_output = num_boxes * num_classes conf_loc = nn.conv2d( input=input, num_filters=num_conf_output, filter_size=kernel_size, padding=pad, stride=stride) conf_loc = nn.transpose(conf_loc, perm=[0, 2, 3, 1]) conf_loc_flatten = nn.flatten(conf_loc, axis=1) mbox_confs.append(conf_loc_flatten) if len(box_results) == 1: box = box_results[0] var = var_results[0] mbox_locs_concat = mbox_locs[0] mbox_confs_concat = mbox_confs[0] else: reshaped_boxes = [] reshaped_vars = [] for i in range(len(box_results)): reshaped_boxes.append(_reshape_with_axis_(box_results[i], axis=3)) reshaped_vars.append(_reshape_with_axis_(var_results[i], axis=3)) box = tensor.concat(reshaped_boxes) var = tensor.concat(reshaped_vars) mbox_locs_concat = tensor.concat(mbox_locs, axis=1) mbox_locs_concat = nn.reshape(mbox_locs_concat, shape=[0, -1, 4]) mbox_confs_concat = tensor.concat(mbox_confs, axis=1) mbox_confs_concat = nn.reshape( mbox_confs_concat, shape=[0, -1, num_classes]) box.stop_gradient = True var.stop_gradient = True return mbox_locs_concat, mbox_confs_concat, box, var def anchor_generator(input, anchor_sizes=None, aspect_ratios=None, variance=[0.1, 0.1, 0.2, 0.2], stride=None, offset=0.5, name=None): """ **Anchor generator operator** Generate anchors for Faster RCNN algorithm. Each position of the input produce N anchors, N = size(anchor_sizes) * size(aspect_ratios). The order of generated anchors is firstly aspect_ratios loop then anchor_sizes loop. Args: input(Variable): 4-D Tensor with shape [N,C,H,W]. The input feature map. anchor_sizes(float32|list|tuple, optional): The anchor sizes of generated anchors, given in absolute pixels e.g. [64., 128., 256., 512.]. For instance, the anchor size of 64 means the area of this anchor equals to 64**2. None by default. aspect_ratios(float32|list|tuple, optional): The height / width ratios of generated anchors, e.g. [0.5, 1.0, 2.0]. None by default. variance(list|tuple, optional): The variances to be used in box regression deltas. The data type is float32, [0.1, 0.1, 0.2, 0.2] by default. stride(list|tuple, optional): The anchors stride across width and height. The data type is float32. e.g. [16.0, 16.0]. None by default. offset(float32, optional): Prior boxes center offset. 0.5 by default. name(str, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. Returns: Tuple: Anchors(Variable): The output anchors with a layout of [H, W, num_anchors, 4]. H is the height of input, W is the width of input, num_anchors is the box count of each position. Each anchor is in (xmin, ymin, xmax, ymax) format an unnormalized. Variances(Variable): The expanded variances of anchors with a layout of [H, W, num_priors, 4]. H is the height of input, W is the width of input num_anchors is the box count of each position. Each variance is in (xcenter, ycenter, w, h) format. Examples: .. code-block:: python import paddle.fluid as fluid conv1 = fluid.data(name='conv1', shape=[None, 48, 16, 16], dtype='float32') anchor, var = fluid.layers.anchor_generator( input=conv1, anchor_sizes=[64, 128, 256, 512], aspect_ratios=[0.5, 1.0, 2.0], variance=[0.1, 0.1, 0.2, 0.2], stride=[16.0, 16.0], offset=0.5) """ helper = LayerHelper("anchor_generator", **locals()) dtype = helper.input_dtype() def _is_list_or_tuple_(data): return (isinstance(data, list) or isinstance(data, tuple)) if not _is_list_or_tuple_(anchor_sizes): anchor_sizes = [anchor_sizes] if not _is_list_or_tuple_(aspect_ratios): aspect_ratios = [aspect_ratios] if not (_is_list_or_tuple_(stride) and len(stride) == 2): raise ValueError('stride should be a list or tuple ', 'with length 2, (stride_width, stride_height).') anchor_sizes = list(map(float, anchor_sizes)) aspect_ratios = list(map(float, aspect_ratios)) stride = list(map(float, stride)) attrs = { 'anchor_sizes': anchor_sizes, 'aspect_ratios': aspect_ratios, 'variances': variance, 'stride': stride, 'offset': offset } anchor = helper.create_variable_for_type_inference(dtype) var = helper.create_variable_for_type_inference(dtype) helper.append_op( type="anchor_generator", inputs={"Input": input}, outputs={"Anchors": anchor, "Variances": var}, attrs=attrs, ) anchor.stop_gradient = True var.stop_gradient = True return anchor, var def roi_perspective_transform(input, rois, transformed_height, transformed_width, spatial_scale=1.0, name=None): """ **The** `rois` **of this op should be a LoDTensor.** ROI perspective transform op applies perspective transform to map each roi into an rectangular region. Perspective transform is a type of transformation in linear algebra. Parameters: input (Variable): 4-D Tensor, input of ROIPerspectiveTransformOp. The format of input tensor is NCHW. Where N is batch size, C is the number of input channels, H is the height of the feature, and W is the width of the feature. The data type is float32. rois (Variable): 2-D LoDTensor, ROIs (Regions of Interest) to be transformed. It should be a 2-D LoDTensor of shape (num_rois, 8). Given as [[x1, y1, x2, y2, x3, y3, x4, y4], ...], (x1, y1) is the top left coordinates, and (x2, y2) is the top right coordinates, and (x3, y3) is the bottom right coordinates, and (x4, y4) is the bottom left coordinates. The data type is the same as `input` transformed_height (int): The height of transformed output. transformed_width (int): The width of transformed output. spatial_scale (float): Spatial scale factor to scale ROI coords. Default: 1.0 name(str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: A tuple with three Variables. (out, mask, transform_matrix) out: The output of ROIPerspectiveTransformOp which is a 4-D tensor with shape (num_rois, channels, transformed_h, transformed_w). The data type is the same as `input` mask: The mask of ROIPerspectiveTransformOp which is a 4-D tensor with shape (num_rois, 1, transformed_h, transformed_w). The data type is int32 transform_matrix: The transform matrix of ROIPerspectiveTransformOp which is a 2-D tensor with shape (num_rois, 9). The data type is the same as `input` Return Type: tuple Examples: .. code-block:: python import paddle.fluid as fluid x = fluid.data(name='x', shape=[100, 256, 28, 28], dtype='float32') rois = fluid.data(name='rois', shape=[None, 8], lod_level=1, dtype='float32') out, mask, transform_matrix = fluid.layers.roi_perspective_transform(x, rois, 7, 7, 1.0) """ check_variable_and_dtype(input, 'input', ['float32'], 'roi_perspective_transform') check_variable_and_dtype(rois, 'rois', ['float32'], 'roi_perspective_transform') check_type(transformed_height, 'transformed_height', int, 'roi_perspective_transform') check_type(transformed_width, 'transformed_width', int, 'roi_perspective_transform') check_type(spatial_scale, 'spatial_scale', float, 'roi_perspective_transform') helper = LayerHelper('roi_perspective_transform', **locals()) dtype = helper.input_dtype() out = helper.create_variable_for_type_inference(dtype) mask = helper.create_variable_for_type_inference(dtype="int32") transform_matrix = helper.create_variable_for_type_inference(dtype) out2in_idx = helper.create_variable_for_type_inference(dtype="int32") out2in_w = helper.create_variable_for_type_inference(dtype) helper.append_op( type="roi_perspective_transform", inputs={"X": input, "ROIs": rois}, outputs={ "Out": out, "Out2InIdx": out2in_idx, "Out2InWeights": out2in_w, "Mask": mask, "TransformMatrix": transform_matrix }, attrs={ "transformed_height": transformed_height, "transformed_width": transformed_width, "spatial_scale": spatial_scale }) return out, mask, transform_matrix def generate_proposal_labels(rpn_rois, gt_classes, is_crowd, gt_boxes, im_info, batch_size_per_im=256, fg_fraction=0.25, fg_thresh=0.25, bg_thresh_hi=0.5, bg_thresh_lo=0.0, bbox_reg_weights=[0.1, 0.1, 0.2, 0.2], class_nums=None, use_random=True, is_cls_agnostic=False, is_cascade_rcnn=False): """ **Generate Proposal Labels of Faster-RCNN** This operator can be, for given the GenerateProposalOp output bounding boxes and groundtruth, to sample foreground boxes and background boxes, and compute loss target. RpnRois is the output boxes of RPN and was processed by generate_proposal_op, these boxes were combined with groundtruth boxes and sampled according to batch_size_per_im and fg_fraction, If an instance with a groundtruth overlap greater than fg_thresh, then it was considered as a foreground sample. If an instance with a groundtruth overlap greater than bg_thresh_lo and lower than bg_thresh_hi, then it was considered as a background sample. After all foreground and background boxes are chosen (so called Rois), then we apply random sampling to make sure the number of foreground boxes is no more than batch_size_per_im * fg_fraction. For each box in Rois, we assign the classification (class label) and regression targets (box label) to it. Finally BboxInsideWeights and BboxOutsideWeights are used to specify whether it would contribute to training loss. Args: rpn_rois(Variable): A 2-D LoDTensor with shape [N, 4]. N is the number of the GenerateProposalOp's output, each element is a bounding box with [xmin, ymin, xmax, ymax] format. The data type can be float32 or float64. gt_classes(Variable): A 2-D LoDTensor with shape [M, 1]. M is the number of groundtruth, each element is a class label of groundtruth. The data type must be int32. is_crowd(Variable): A 2-D LoDTensor with shape [M, 1]. M is the number of groundtruth, each element is a flag indicates whether a groundtruth is crowd. The data type must be int32. gt_boxes(Variable): A 2-D LoDTensor with shape [M, 4]. M is the number of groundtruth, each element is a bounding box with [xmin, ymin, xmax, ymax] format. im_info(Variable): A 2-D LoDTensor with shape [B, 3]. B is the number of input images, each element consists of im_height, im_width, im_scale. batch_size_per_im(int): Batch size of rois per images. The data type must be int32. fg_fraction(float): Foreground fraction in total batch_size_per_im. The data type must be float32. fg_thresh(float): Overlap threshold which is used to chose foreground sample. The data type must be float32. bg_thresh_hi(float): Overlap threshold upper bound which is used to chose background sample. The data type must be float32. bg_thresh_lo(float): Overlap threshold lower bound which is used to chose background sample. The data type must be float32. bbox_reg_weights(list|tuple): Box regression weights. The data type must be float32. class_nums(int): Class number. The data type must be int32. use_random(bool): Use random sampling to choose foreground and background boxes. is_cls_agnostic(bool): bbox regression use class agnostic simply which only represent fg and bg boxes. is_cascade_rcnn(bool): it will filter some bbox crossing the image's boundary when setting True. Returns: tuple: A tuple with format``(rois, labels_int32, bbox_targets, bbox_inside_weights, bbox_outside_weights)``. - **rois**: 2-D LoDTensor with shape ``[batch_size_per_im * batch_size, 4]``. The data type is the same as ``rpn_rois``. - **labels_int32**: 2-D LoDTensor with shape ``[batch_size_per_im * batch_size, 1]``. The data type must be int32. - **bbox_targets**: 2-D LoDTensor with shape ``[batch_size_per_im * batch_size, 4 * class_num]``. The regression targets of all RoIs. The data type is the same as ``rpn_rois``. - **bbox_inside_weights**: 2-D LoDTensor with shape ``[batch_size_per_im * batch_size, 4 * class_num]``. The weights of foreground boxes' regression loss. The data type is the same as ``rpn_rois``. - **bbox_outside_weights**: 2-D LoDTensor with shape ``[batch_size_per_im * batch_size, 4 * class_num]``. The weights of regression loss. The data type is the same as ``rpn_rois``. Examples: .. code-block:: python import paddle.fluid as fluid rpn_rois = fluid.data(name='rpn_rois', shape=[None, 4], dtype='float32') gt_classes = fluid.data(name='gt_classes', shape=[None, 1], dtype='float32') is_crowd = fluid.data(name='is_crowd', shape=[None, 1], dtype='float32') gt_boxes = fluid.data(name='gt_boxes', shape=[None, 4], dtype='float32') im_info = fluid.data(name='im_info', shape=[None, 3], dtype='float32') rois, labels, bbox, inside_weights, outside_weights = fluid.layers.generate_proposal_labels( rpn_rois, gt_classes, is_crowd, gt_boxes, im_info, class_nums=10) """ helper = LayerHelper('generate_proposal_labels', **locals()) rois = helper.create_variable_for_type_inference(dtype=rpn_rois.dtype) labels_int32 = helper.create_variable_for_type_inference( dtype=gt_classes.dtype) bbox_targets = helper.create_variable_for_type_inference( dtype=rpn_rois.dtype) bbox_inside_weights = helper.create_variable_for_type_inference( dtype=rpn_rois.dtype) bbox_outside_weights = helper.create_variable_for_type_inference( dtype=rpn_rois.dtype) helper.append_op( type="generate_proposal_labels", inputs={ 'RpnRois': rpn_rois, 'GtClasses': gt_classes, 'IsCrowd': is_crowd, 'GtBoxes': gt_boxes, 'ImInfo': im_info }, outputs={ 'Rois': rois, 'LabelsInt32': labels_int32, 'BboxTargets': bbox_targets, 'BboxInsideWeights': bbox_inside_weights, 'BboxOutsideWeights': bbox_outside_weights }, attrs={ 'batch_size_per_im': batch_size_per_im, 'fg_fraction': fg_fraction, 'fg_thresh': fg_thresh, 'bg_thresh_hi': bg_thresh_hi, 'bg_thresh_lo': bg_thresh_lo, 'bbox_reg_weights': bbox_reg_weights, 'class_nums': class_nums, 'use_random': use_random, 'is_cls_agnostic': is_cls_agnostic, 'is_cascade_rcnn': is_cascade_rcnn }) rois.stop_gradient = True labels_int32.stop_gradient = True bbox_targets.stop_gradient = True bbox_inside_weights.stop_gradient = True bbox_outside_weights.stop_gradient = True return rois, labels_int32, bbox_targets, bbox_inside_weights, bbox_outside_weights def generate_mask_labels(im_info, gt_classes, is_crowd, gt_segms, rois, labels_int32, num_classes, resolution): """ **Generate Mask Labels for Mask-RCNN** This operator can be, for given the RoIs and corresponding labels, to sample foreground RoIs. This mask branch also has a :math: `K \\times M^{2}` dimensional output targets for each foreground RoI, which encodes K binary masks of resolution M x M, one for each of the K classes. This mask targets are used to compute loss of mask branch. Please note, the data format of groud-truth segmentation, assumed the segmentations are as follows. The first instance has two gt objects. The second instance has one gt object, this object has two gt segmentations. .. code-block:: python #[ # [[[229.14, 370.9, 229.14, 370.9, ...]], # [[343.7, 139.85, 349.01, 138.46, ...]]], # 0-th instance # [[[500.0, 390.62, ...],[115.48, 187.86, ...]]] # 1-th instance #] batch_masks = [] for semgs in batch_semgs: gt_masks = [] for semg in semgs: gt_segm = [] for polys in semg: gt_segm.append(np.array(polys).reshape(-1, 2)) gt_masks.append(gt_segm) batch_masks.append(gt_masks) place = fluid.CPUPlace() feeder = fluid.DataFeeder(place=place, feed_list=feeds) feeder.feed(batch_masks) Args: im_info (Variable): A 2-D Tensor with shape [N, 3] and float32 data type. N is the batch size, each element is [height, width, scale] of image. Image scale is target_size / original_size, target_size is the size after resize, original_size is the original image size. gt_classes (Variable): A 2-D LoDTensor with shape [M, 1]. Data type should be int. M is the total number of ground-truth, each element is a class label. is_crowd (Variable): A 2-D LoDTensor with same shape and same data type as gt_classes, each element is a flag indicating whether a groundtruth is crowd. gt_segms (Variable): This input is a 2D LoDTensor with shape [S, 2] and float32 data type, it's LoD level is 3. Usually users do not needs to understand LoD, The users should return correct data format in reader. The LoD[0] represents the ground-truth objects number of each instance. LoD[1] represents the segmentation counts of each objects. LoD[2] represents the polygons number of each segmentation. S the total number of polygons coordinate points. Each element is (x, y) coordinate points. rois (Variable): A 2-D LoDTensor with shape [R, 4] and float32 data type float32. R is the total number of RoIs, each element is a bounding box with (xmin, ymin, xmax, ymax) format in the range of original image. labels_int32 (Variable): A 2-D LoDTensor in shape of [R, 1] with type of int32. R is the same as it in `rois`. Each element represents a class label of a RoI. num_classes (int): Class number. resolution (int): Resolution of mask predictions. Returns: mask_rois (Variable): A 2D LoDTensor with shape [P, 4] and same data type as `rois`. P is the total number of sampled RoIs. Each element is a bounding box with [xmin, ymin, xmax, ymax] format in range of original image size. mask_rois_has_mask_int32 (Variable): A 2D LoDTensor with shape [P, 1] and int data type, each element represents the output mask RoI index with regard to input RoIs. mask_int32 (Variable): A 2D LoDTensor with shape [P, K * M * M] and int data type, K is the classes number and M is the resolution of mask predictions. Each element represents the binary mask targets. Examples: .. code-block:: python import paddle.fluid as fluid im_info = fluid.data(name="im_info", shape=[None, 3], dtype="float32") gt_classes = fluid.data(name="gt_classes", shape=[None, 1], dtype="float32", lod_level=1) is_crowd = fluid.data(name="is_crowd", shape=[None, 1], dtype="float32", lod_level=1) gt_masks = fluid.data(name="gt_masks", shape=[None, 2], dtype="float32", lod_level=3) # rois, roi_labels can be the output of # fluid.layers.generate_proposal_labels. rois = fluid.data(name="rois", shape=[None, 4], dtype="float32", lod_level=1) roi_labels = fluid.data(name="roi_labels", shape=[None, 1], dtype="int32", lod_level=1) mask_rois, mask_index, mask_int32 = fluid.layers.generate_mask_labels( im_info=im_info, gt_classes=gt_classes, is_crowd=is_crowd, gt_segms=gt_masks, rois=rois, labels_int32=roi_labels, num_classes=81, resolution=14) """ helper = LayerHelper('generate_mask_labels', **locals()) mask_rois = helper.create_variable_for_type_inference(dtype=rois.dtype) roi_has_mask_int32 = helper.create_variable_for_type_inference( dtype=gt_classes.dtype) mask_int32 = helper.create_variable_for_type_inference( dtype=gt_classes.dtype) helper.append_op( type="generate_mask_labels", inputs={ 'ImInfo': im_info, 'GtClasses': gt_classes, 'IsCrowd': is_crowd, 'GtSegms': gt_segms, 'Rois': rois, 'LabelsInt32': labels_int32 }, outputs={ 'MaskRois': mask_rois, 'RoiHasMaskInt32': roi_has_mask_int32, 'MaskInt32': mask_int32 }, attrs={'num_classes': num_classes, 'resolution': resolution}) mask_rois.stop_gradient = True roi_has_mask_int32.stop_gradient = True mask_int32.stop_gradient = True return mask_rois, roi_has_mask_int32, mask_int32 def generate_proposals(scores, bbox_deltas, im_info, anchors, variances, pre_nms_top_n=6000, post_nms_top_n=1000, nms_thresh=0.5, min_size=0.1, eta=1.0, name=None): """ **Generate proposal Faster-RCNN** This operation proposes RoIs according to each box with their probability to be a foreground object and the box can be calculated by anchors. Bbox_deltais and scores to be an object are the output of RPN. Final proposals could be used to train detection net. For generating proposals, this operation performs following steps: 1. Transposes and resizes scores and bbox_deltas in size of (H*W*A, 1) and (H*W*A, 4) 2. Calculate box locations as proposals candidates. 3. Clip boxes to image 4. Remove predicted boxes with small area. 5. Apply NMS to get final proposals as output. Args: scores(Variable): A 4-D Tensor with shape [N, A, H, W] represents the probability for each box to be an object. N is batch size, A is number of anchors, H and W are height and width of the feature map. The data type must be float32. bbox_deltas(Variable): A 4-D Tensor with shape [N, 4*A, H, W] represents the difference between predicted box location and anchor location. The data type must be float32. im_info(Variable): A 2-D Tensor with shape [N, 3] represents origin image information for N batch. Height and width are the input sizes and scale is the ratio of network input size and original size. The data type must be int32. anchors(Variable): A 4-D Tensor represents the anchors with a layout of [H, W, A, 4]. H and W are height and width of the feature map, num_anchors is the box count of each position. Each anchor is in (xmin, ymin, xmax, ymax) format an unnormalized. The data type must be float32. variances(Variable): A 4-D Tensor. The expanded variances of anchors with a layout of [H, W, num_priors, 4]. Each variance is in (xcenter, ycenter, w, h) format. The data type must be float32. pre_nms_top_n(float): Number of total bboxes to be kept per image before NMS. The data type must be float32. `6000` by default. post_nms_top_n(float): Number of total bboxes to be kept per image after NMS. The data type must be float32. `1000` by default. nms_thresh(float): Threshold in NMS. The data type must be float32. `0.5` by default. min_size(float): Remove predicted boxes with either height or width < min_size. The data type must be float32. `0.1` by default. eta(float): Apply in adaptive NMS, if adaptive `threshold > 0.5`, `adaptive_threshold = adaptive_threshold * eta` in each iteration. Returns: tuple: A tuple with format ``(rpn_rois, rpn_roi_probs)``. - **rpn_rois**: The generated RoIs. 2-D Tensor with shape ``[N, 4]`` while ``N`` is the number of RoIs. The data type is the same as ``scores``. - **rpn_roi_probs**: The scores of generated RoIs. 2-D Tensor with shape ``[N, 1]`` while ``N`` is the number of RoIs. The data type is the same as ``scores``. Examples: .. code-block:: python import paddle.fluid as fluid scores = fluid.data(name='scores', shape=[None, 4, 5, 5], dtype='float32') bbox_deltas = fluid.data(name='bbox_deltas', shape=[None, 16, 5, 5], dtype='float32') im_info = fluid.data(name='im_info', shape=[None, 3], dtype='float32') anchors = fluid.data(name='anchors', shape=[None, 5, 4, 4], dtype='float32') variances = fluid.data(name='variances', shape=[None, 5, 10, 4], dtype='float32') rois, roi_probs = fluid.layers.generate_proposals(scores, bbox_deltas, im_info, anchors, variances) """ helper = LayerHelper('generate_proposals', **locals()) rpn_rois = helper.create_variable_for_type_inference( dtype=bbox_deltas.dtype) rpn_roi_probs = helper.create_variable_for_type_inference( dtype=scores.dtype) rpn_rois_lod = helper.create_variable_for_type_inference(dtype='int32') helper.append_op( type="generate_proposals", inputs={ 'Scores': scores, 'BboxDeltas': bbox_deltas, 'ImInfo': im_info, 'Anchors': anchors, 'Variances': variances }, attrs={ 'pre_nms_topN': pre_nms_top_n, 'post_nms_topN': post_nms_top_n, 'nms_thresh': nms_thresh, 'min_size': min_size, 'eta': eta }, outputs={ 'RpnRois': rpn_rois, 'RpnRoiProbs': rpn_roi_probs, 'RpnRoisLod': rpn_rois_lod }) rpn_rois.stop_gradient = True rpn_roi_probs.stop_gradient = True rpn_rois_lod.stop_gradient = True return rpn_rois, rpn_roi_probs, rpn_rois_lod def box_clip(input, im_info, name=None): """ Clip the box into the size given by im_info For each input box, The formula is given as follows: .. code-block:: text xmin = max(min(xmin, im_w - 1), 0) ymin = max(min(ymin, im_h - 1), 0) xmax = max(min(xmax, im_w - 1), 0) ymax = max(min(ymax, im_h - 1), 0) where im_w and im_h are computed from im_info: .. code-block:: text im_h = round(height / scale) im_w = round(weight / scale) Args: input(Variable): The input Tensor with shape :math:`[N_1, N_2, ..., N_k, 4]`, the last dimension is 4 and data type is float32 or float64. im_info(Variable): The 2-D Tensor with shape [N, 3] with layout (height, width, scale) representing the information of image. Height and width are the input sizes and scale is the ratio of network input size and original size. The data type is float32 or float64. name(str, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. Returns: Variable: output(Variable): The clipped tensor with data type float32 or float64. The shape is same as input. Examples: .. code-block:: python import paddle.fluid as fluid boxes = fluid.data( name='boxes', shape=[None, 8, 4], dtype='float32', lod_level=1) im_info = fluid.data(name='im_info', shape=[-1 ,3]) out = fluid.layers.box_clip( input=boxes, im_info=im_info) """ check_variable_and_dtype(input, 'input', ['float32', 'float64'], 'box_clip') check_variable_and_dtype(im_info, 'im_info', ['float32', 'float64'], 'box_clip') helper = LayerHelper("box_clip", **locals()) output = helper.create_variable_for_type_inference(dtype=input.dtype) inputs = {"Input": input, "ImInfo": im_info} helper.append_op(type="box_clip", inputs=inputs, outputs={"Output": output}) return output def retinanet_detection_output(bboxes, scores, anchors, im_info, score_threshold=0.05, nms_top_k=1000, keep_top_k=100, nms_threshold=0.3, nms_eta=1.): """ **Detection Output Layer for the detector RetinaNet.** In the detector `RetinaNet `_ , many `FPN `_ levels output the category and location predictions, this OP is to get the detection results by performing following steps: 1. For each FPN level, decode box predictions according to the anchor boxes from at most :attr:`nms_top_k` top-scoring predictions after thresholding detector confidence at :attr:`score_threshold`. 2. Merge top predictions from all levels and apply multi-class non maximum suppression (NMS) on them to get the final detections. Args: bboxes(List): A list of Tensors from multiple FPN levels represents the location prediction for all anchor boxes. Each element is a 3-D Tensor with shape :math:`[N, Mi, 4]`, :math:`N` is the batch size, :math:`Mi` is the number of bounding boxes from :math:`i`-th FPN level and each bounding box has four coordinate values and the layout is [xmin, ymin, xmax, ymax]. The data type of each element is float32 or float64. scores(List): A list of Tensors from multiple FPN levels represents the category prediction for all anchor boxes. Each element is a 3-D Tensor with shape :math:`[N, Mi, C]`, :math:`N` is the batch size, :math:`C` is the class number (**excluding background**), :math:`Mi` is the number of bounding boxes from :math:`i`-th FPN level. The data type of each element is float32 or float64. anchors(List): A list of Tensors from multiple FPN levels represents the locations of all anchor boxes. Each element is a 2-D Tensor with shape :math:`[Mi, 4]`, :math:`Mi` is the number of bounding boxes from :math:`i`-th FPN level, and each bounding box has four coordinate values and the layout is [xmin, ymin, xmax, ymax]. The data type of each element is float32 or float64. im_info(Variable): A 2-D Tensor with shape :math:`[N, 3]` represents the size information of input images. :math:`N` is the batch size, the size information of each image is a 3-vector which are the height and width of the network input along with the factor scaling the origin image to the network input. The data type of :attr:`im_info` is float32. score_threshold(float): Threshold to filter out bounding boxes with a confidence score before NMS, default value is set to 0.05. nms_top_k(int): Maximum number of detections per FPN layer to be kept according to the confidences before NMS, default value is set to 1000. keep_top_k(int): Number of total bounding boxes to be kept per image after NMS step. Default value is set to 100, -1 means keeping all bounding boxes after NMS step. nms_threshold(float): The Intersection-over-Union(IoU) threshold used to filter out boxes in NMS. nms_eta(float): The parameter for adjusting :attr:`nms_threshold` in NMS. Default value is set to 1., which represents the value of :attr:`nms_threshold` keep the same in NMS. If :attr:`nms_eta` is set to be lower than 1. and the value of :attr:`nms_threshold` is set to be higher than 0.5, everytime a bounding box is filtered out, the adjustment for :attr:`nms_threshold` like :attr:`nms_threshold` = :attr:`nms_threshold` * :attr:`nms_eta` will not be stopped until the actual value of :attr:`nms_threshold` is lower than or equal to 0.5. **Notice**: In some cases where the image sizes are very small, it's possible that there is no detection if :attr:`score_threshold` are used at all levels. Hence, this OP do not filter out anchors from the highest FPN level before NMS. And the last element in :attr:`bboxes`:, :attr:`scores` and :attr:`anchors` is required to be from the highest FPN level. Returns: Variable(The data type is float32 or float64): The detection output is a 1-level LoDTensor with shape :math:`[No, 6]`. Each row has six values: [label, confidence, xmin, ymin, xmax, ymax]. :math:`No` is the total number of detections in this mini-batch. The :math:`i`-th image has `LoD[i + 1] - LoD[i]` detected results, if `LoD[i + 1] - LoD[i]` is 0, the :math:`i`-th image has no detected results. If all images have no detected results, LoD will be set to 0, and the output tensor is empty (None). Examples: .. code-block:: python import paddle.fluid as fluid bboxes_low = fluid.data( name='bboxes_low', shape=[1, 44, 4], dtype='float32') bboxes_high = fluid.data( name='bboxes_high', shape=[1, 11, 4], dtype='float32') scores_low = fluid.data( name='scores_low', shape=[1, 44, 10], dtype='float32') scores_high = fluid.data( name='scores_high', shape=[1, 11, 10], dtype='float32') anchors_low = fluid.data( name='anchors_low', shape=[44, 4], dtype='float32') anchors_high = fluid.data( name='anchors_high', shape=[11, 4], dtype='float32') im_info = fluid.data( name="im_info", shape=[1, 3], dtype='float32') nmsed_outs = fluid.layers.retinanet_detection_output( bboxes=[bboxes_low, bboxes_high], scores=[scores_low, scores_high], anchors=[anchors_low, anchors_high], im_info=im_info, score_threshold=0.05, nms_top_k=1000, keep_top_k=100, nms_threshold=0.45, nms_eta=1.) """ check_type(bboxes, 'bboxes', (list), 'retinanet_detection_output') for i, bbox in enumerate(bboxes): check_variable_and_dtype(bbox, 'bbox{}'.format(i), ['float32', 'float64'], 'retinanet_detection_output') check_type(scores, 'scores', (list), 'retinanet_detection_output') for i, score in enumerate(scores): check_variable_and_dtype(score, 'score{}'.format(i), ['float32', 'float64'], 'retinanet_detection_output') check_type(anchors, 'anchors', (list), 'retinanet_detection_output') for i, anchor in enumerate(anchors): check_variable_and_dtype(anchor, 'anchor{}'.format(i), ['float32', 'float64'], 'retinanet_detection_output') check_variable_and_dtype(im_info, 'im_info', ['float32', 'float64'], 'retinanet_detection_output') helper = LayerHelper('retinanet_detection_output', **locals()) output = helper.create_variable_for_type_inference( dtype=helper.input_dtype('scores')) helper.append_op( type="retinanet_detection_output", inputs={ 'BBoxes': bboxes, 'Scores': scores, 'Anchors': anchors, 'ImInfo': im_info }, attrs={ 'score_threshold': score_threshold, 'nms_top_k': nms_top_k, 'nms_threshold': nms_threshold, 'keep_top_k': keep_top_k, 'nms_eta': 1., }, outputs={'Out': output}) output.stop_gradient = True return output def multiclass_nms(bboxes, scores, score_threshold, nms_top_k, keep_top_k, nms_threshold=0.3, normalized=True, nms_eta=1., background_label=0, name=None): """ **Multiclass NMS** This operator is to do multi-class non maximum suppression (NMS) on boxes and scores. In the NMS step, this operator greedily selects a subset of detection bounding boxes that have high scores larger than score_threshold, if providing this threshold, then selects the largest nms_top_k confidences scores if nms_top_k is larger than -1. Then this operator pruns away boxes that have high IOU (intersection over union) overlap with already selected boxes by adaptive threshold NMS based on parameters of nms_threshold and nms_eta. Aftern NMS step, at most keep_top_k number of total bboxes are to be kept per image if keep_top_k is larger than -1. See below for an example: .. code-block:: text if: box1.data = (2.0, 3.0, 7.0, 5.0) format is (xmin, ymin, xmax, ymax) box1.scores = (0.7, 0.2, 0.4) which is (label0.score=0.7, label1.score=0.2, label2.cores=0.4) box2.data = (3.0, 4.0, 8.0, 5.0) box2.score = (0.3, 0.3, 0.1) nms_threshold = 0.3 background_label = 0 score_threshold = 0 Then: iou = 4/11 > 0.3 out.data = [[1, 0.3, 3.0, 4.0, 8.0, 5.0], [2, 0.4, 2.0, 3.0, 7.0, 5.0]] Out format is (label, confidence, xmin, ymin, xmax, ymax) Args: bboxes (Variable): Two types of bboxes are supported: 1. (Tensor) A 3-D Tensor with shape [N, M, 4 or 8 16 24 32] represents the predicted locations of M bounding bboxes, N is the batch size. Each bounding box has four coordinate values and the layout is [xmin, ymin, xmax, ymax], when box size equals to 4. The data type is float32 or float64. 2. (LoDTensor) A 3-D Tensor with shape [M, C, 4] M is the number of bounding boxes, C is the class number. The data type is float32 or float64. scores (Variable): Two types of scores are supported: 1. (Tensor) A 3-D Tensor with shape [N, C, M] represents the predicted confidence predictions. N is the batch size, C is the class number, M is number of bounding boxes. For each category there are total M scores which corresponding M bounding boxes. Please note, M is equal to the 2nd dimension of BBoxes.The data type is float32 or float64. 2. (LoDTensor) A 2-D LoDTensor with shape [M, C]. M is the number of bbox, C is the class number. In this case, input BBoxes should be the second case with shape [M, C, 4].The data type is float32 or float64. background_label (int): The index of background label, the background label will be ignored. If set to -1, then all categories will be considered. Default: 0 score_threshold (float): Threshold to filter out bounding boxes with low confidence score. If not provided, consider all boxes. nms_top_k (int): Maximum number of detections to be kept according to the confidences after the filtering detections based on score_threshold. nms_threshold (float): The threshold to be used in NMS. Default: 0.3 nms_eta (float): The threshold to be used in NMS. Default: 1.0 keep_top_k (int): Number of total bboxes to be kept per image after NMS step. -1 means keeping all bboxes after NMS step. normalized (bool): Whether detections are normalized. Default: True name(str): Name of the multiclass nms op. Default: None. Returns: Variable: A 2-D LoDTensor with shape [No, 6] represents the detections. Each row has 6 values: [label, confidence, xmin, ymin, xmax, ymax] or A 2-D LoDTensor with shape [No, 10] represents the detections. Each row has 10 values: [label, confidence, x1, y1, x2, y2, x3, y3, x4, y4]. No is the total number of detections. If there is no detected boxes for all images, lod will be set to {1} and Out only contains one value which is -1. (After version 1.3, when no boxes detected, the lod is changed from {0} to {1}) Examples: .. code-block:: python import paddle.fluid as fluid boxes = fluid.data(name='bboxes', shape=[None,81, 4], dtype='float32', lod_level=1) scores = fluid.data(name='scores', shape=[None,81], dtype='float32', lod_level=1) out = fluid.layers.multiclass_nms(bboxes=boxes, scores=scores, background_label=0, score_threshold=0.5, nms_top_k=400, nms_threshold=0.3, keep_top_k=200, normalized=False) """ helper = LayerHelper('multiclass_nms', **locals()) output = helper.create_variable_for_type_inference(dtype=bboxes.dtype) helper.append_op( type="multiclass_nms", inputs={'BBoxes': bboxes, 'Scores': scores}, attrs={ 'background_label': background_label, 'score_threshold': score_threshold, 'nms_top_k': nms_top_k, 'nms_threshold': nms_threshold, 'nms_eta': nms_eta, 'keep_top_k': keep_top_k, 'nms_eta': nms_eta, 'normalized': normalized }, outputs={'Out': output}) output.stop_gradient = True return output def locality_aware_nms(bboxes, scores, score_threshold, nms_top_k, keep_top_k, nms_threshold=0.3, normalized=True, nms_eta=1., background_label=-1, name=None): """ **Local Aware NMS** `Local Aware NMS `_ is to do locality-aware non maximum suppression (LANMS) on boxes and scores. Firstly, this operator merge box and score according their IOU (intersection over union). In the NMS step, this operator greedily selects a subset of detection bounding boxes that have high scores larger than score_threshold, if providing this threshold, then selects the largest nms_top_k confidences scores if nms_top_k is larger than -1. Then this operator pruns away boxes that have high IOU overlap with already selected boxes by adaptive threshold NMS based on parameters of nms_threshold and nms_eta. Aftern NMS step, at most keep_top_k number of total bboxes are to be kept per image if keep_top_k is larger than -1. Args: bboxes (Variable): A 3-D Tensor with shape [N, M, 4 or 8 16 24 32] represents the predicted locations of M bounding bboxes, N is the batch size. Each bounding box has four coordinate values and the layout is [xmin, ymin, xmax, ymax], when box size equals to 4. The data type is float32 or float64. scores (Variable): A 3-D Tensor with shape [N, C, M] represents the predicted confidence predictions. N is the batch size, C is the class number, M is number of bounding boxes. Now only support 1 class. For each category there are total M scores which corresponding M bounding boxes. Please note, M is equal to the 2nd dimension of BBoxes. The data type is float32 or float64. background_label (int): The index of background label, the background label will be ignored. If set to -1, then all categories will be considered. Default: -1 score_threshold (float): Threshold to filter out bounding boxes with low confidence score. If not provided, consider all boxes. nms_top_k (int): Maximum number of detections to be kept according to the confidences after the filtering detections based on score_threshold. keep_top_k (int): Number of total bboxes to be kept per image after NMS step. -1 means keeping all bboxes after NMS step. nms_threshold (float): The threshold to be used in NMS. Default: 0.3 nms_eta (float): The threshold to be used in NMS. Default: 1.0 normalized (bool): Whether detections are normalized. Default: True name(str): Name of the locality aware nms op, please refer to :ref:`api_guide_Name` . Default: None. Returns: Variable: A 2-D LoDTensor with shape [No, 6] represents the detections. Each row has 6 values: [label, confidence, xmin, ymin, xmax, ymax] or A 2-D LoDTensor with shape [No, 10] represents the detections. Each row has 10 values: [label, confidence, x1, y1, x2, y2, x3, y3, x4, y4]. No is the total number of detections. If there is no detected boxes for all images, lod will be set to {1} and Out only contains one value which is -1. (After version 1.3, when no boxes detected, the lod is changed from {0} to {1}). The data type is float32 or float64. Examples: .. code-block:: python import paddle.fluid as fluid boxes = fluid.data(name='bboxes', shape=[None, 81, 8], dtype='float32') scores = fluid.data(name='scores', shape=[None, 1, 81], dtype='float32') out = fluid.layers.locality_aware_nms(bboxes=boxes, scores=scores, score_threshold=0.5, nms_top_k=400, nms_threshold=0.3, keep_top_k=200, normalized=False) """ check_variable_and_dtype(bboxes, 'bboxes', ['float32', 'float64'], 'locality_aware_nms') check_variable_and_dtype(scores, 'scores', ['float32', 'float64'], 'locality_aware_nms') check_type(background_label, 'background_label', int, 'locality_aware_nms') check_type(score_threshold, 'score_threshold', float, 'locality_aware_nms') check_type(nms_top_k, 'nms_top_k', int, 'locality_aware_nms') check_type(nms_eta, 'nms_eta', float, 'locality_aware_nms') check_type(nms_threshold, 'nms_threshold', float, 'locality_aware_nms') check_type(keep_top_k, 'keep_top_k', int, 'locality_aware_nms') check_type(normalized, 'normalized', bool, 'locality_aware_nms') shape = scores.shape assert len(shape) == 3, "dim size of scores must be 3" assert shape[ 1] == 1, "locality_aware_nms only support one class, Tensor score shape must be [N, 1, M]" helper = LayerHelper('locality_aware_nms', **locals()) output = helper.create_variable_for_type_inference(dtype=bboxes.dtype) out = {'Out': output} helper.append_op( type="locality_aware_nms", inputs={'BBoxes': bboxes, 'Scores': scores}, attrs={ 'background_label': background_label, 'score_threshold': score_threshold, 'nms_top_k': nms_top_k, 'nms_threshold': nms_threshold, 'nms_eta': nms_eta, 'keep_top_k': keep_top_k, 'nms_eta': nms_eta, 'normalized': normalized }, outputs={'Out': output}) output.stop_gradient = True return output def distribute_fpn_proposals(fpn_rois, min_level, max_level, refer_level, refer_scale, name=None): """ **This op only takes LoDTensor as input.** In Feature Pyramid Networks (FPN) models, it is needed to distribute all proposals into different FPN level, with respect to scale of the proposals, the referring scale and the referring level. Besides, to restore the order of proposals, we return an array which indicates the original index of rois in current proposals. To compute FPN level for each roi, the formula is given as follows: .. math:: roi\_scale &= \sqrt{BBoxArea(fpn\_roi)} level = floor(&\log(\\frac{roi\_scale}{refer\_scale}) + refer\_level) where BBoxArea is a function to compute the area of each roi. Args: fpn_rois(Variable): 2-D Tensor with shape [N, 4] and data type is float32 or float64. The input fpn_rois. min_level(int32): The lowest level of FPN layer where the proposals come from. max_level(int32): The highest level of FPN layer where the proposals come from. refer_level(int32): The referring level of FPN layer with specified scale. refer_scale(int32): The referring scale of FPN layer with specified level. name(str, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. Returns: Tuple: multi_rois(List) : A list of 2-D LoDTensor with shape [M, 4] and data type of float32 and float64. The length is max_level-min_level+1. The proposals in each FPN level. restore_ind(Variable): A 2-D Tensor with shape [N, 1], N is the number of total rois. The data type is int32. It is used to restore the order of fpn_rois. Examples: .. code-block:: python import paddle.fluid as fluid fpn_rois = fluid.data( name='data', shape=[None, 4], dtype='float32', lod_level=1) multi_rois, restore_ind = fluid.layers.distribute_fpn_proposals( fpn_rois=fpn_rois, min_level=2, max_level=5, refer_level=4, refer_scale=224) """ helper = LayerHelper('distribute_fpn_proposals', **locals()) dtype = helper.input_dtype('fpn_rois') num_lvl = max_level - min_level + 1 multi_rois = [ helper.create_variable_for_type_inference(dtype) for i in range(num_lvl) ] restore_ind = helper.create_variable_for_type_inference(dtype='int32') helper.append_op( type='distribute_fpn_proposals', inputs={'FpnRois': fpn_rois}, outputs={'MultiFpnRois': multi_rois, 'RestoreIndex': restore_ind}, attrs={ 'min_level': min_level, 'max_level': max_level, 'refer_level': refer_level, 'refer_scale': refer_scale }) return multi_rois, restore_ind @templatedoc() def box_decoder_and_assign(prior_box, prior_box_var, target_box, box_score, box_clip, name=None): """ ${comment} Args: prior_box(${prior_box_type}): ${prior_box_comment} prior_box_var(${prior_box_var_type}): ${prior_box_var_comment} target_box(${target_box_type}): ${target_box_comment} box_score(${box_score_type}): ${box_score_comment} box_clip(${box_clip_type}): ${box_clip_comment} name(str, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. Returns: Tuple: decode_box(${decode_box_type}): ${decode_box_comment} output_assign_box(${output_assign_box_type}): ${output_assign_box_comment} Examples: .. code-block:: python import paddle.fluid as fluid pb = fluid.data( name='prior_box', shape=[None, 4], dtype='float32') pbv = fluid.data( name='prior_box_var', shape=[4], dtype='float32') loc = fluid.data( name='target_box', shape=[None, 4*81], dtype='float32') scores = fluid.data( name='scores', shape=[None, 81], dtype='float32') decoded_box, output_assign_box = fluid.layers.box_decoder_and_assign( pb, pbv, loc, scores, 4.135) """ helper = LayerHelper("box_decoder_and_assign", **locals()) decoded_box = helper.create_variable_for_type_inference( dtype=prior_box.dtype) output_assign_box = helper.create_variable_for_type_inference( dtype=prior_box.dtype) helper.append_op( type="box_decoder_and_assign", inputs={ "PriorBox": prior_box, "PriorBoxVar": prior_box_var, "TargetBox": target_box, "BoxScore": box_score }, attrs={"box_clip": box_clip}, outputs={ "DecodeBox": decoded_box, "OutputAssignBox": output_assign_box }) return decoded_box, output_assign_box def collect_fpn_proposals(multi_rois, multi_scores, min_level, max_level, post_nms_top_n, name=None): """ **This OP only supports LoDTensor as input**. Concat multi-level RoIs (Region of Interest) and select N RoIs with respect to multi_scores. This operation performs the following steps: 1. Choose num_level RoIs and scores as input: num_level = max_level - min_level 2. Concat multi-level RoIs and scores 3. Sort scores and select post_nms_top_n scores 4. Gather RoIs by selected indices from scores 5. Re-sort RoIs by corresponding batch_id Args: multi_rois(list): List of RoIs to collect. Element in list is 2-D LoDTensor with shape [N, 4] and data type is float32 or float64, N is the number of RoIs. multi_scores(list): List of scores of RoIs to collect. Element in list is 2-D LoDTensor with shape [N, 1] and data type is float32 or float64, N is the number of RoIs. min_level(int): The lowest level of FPN layer to collect max_level(int): The highest level of FPN layer to collect post_nms_top_n(int): The number of selected RoIs name(str, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. Returns: Variable: fpn_rois(Variable): 2-D LoDTensor with shape [N, 4] and data type is float32 or float64. Selected RoIs. Examples: .. code-block:: python import paddle.fluid as fluid multi_rois = [] multi_scores = [] for i in range(4): multi_rois.append(fluid.data( name='roi_'+str(i), shape=[None, 4], dtype='float32', lod_level=1)) for i in range(4): multi_scores.append(fluid.data( name='score_'+str(i), shape=[None, 1], dtype='float32', lod_level=1)) fpn_rois = fluid.layers.collect_fpn_proposals( multi_rois=multi_rois, multi_scores=multi_scores, min_level=2, max_level=5, post_nms_top_n=2000) """ helper = LayerHelper('collect_fpn_proposals', **locals()) dtype = helper.input_dtype('multi_rois') num_lvl = max_level - min_level + 1 input_rois = multi_rois[:num_lvl] input_scores = multi_scores[:num_lvl] output_rois = helper.create_variable_for_type_inference(dtype) output_rois.stop_gradient = True helper.append_op( type='collect_fpn_proposals', inputs={ 'MultiLevelRois': input_rois, 'MultiLevelScores': input_scores }, outputs={'FpnRois': output_rois}, attrs={'post_nms_topN': post_nms_top_n}) return output_rois