#   Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from __future__ import print_function

import unittest
import numpy as np
from op_test import OpTest
import paddle.fluid.core as core

import paddle
import paddle.fluid as fluid
import paddle.fluid.framework as framework


def reference_matmul(X, Y, transpose_X=False, transpose_Y=False):
    """Reference forward implementation using np.matmul."""
    # np.matmul does not support the transpose flags, so we manually
    # transpose X and Y appropriately.
    if transpose_X:
        if X.ndim == 1:
            X = X.reshape((X.size, ))
        elif X.ndim == 2:
            X = X.T
        else:
            dim = [i for i in range(len(X.shape))]
            dim[-1], dim[len(X.shape) - 2] = dim[len(X.shape) - 2], dim[-1]
            X = np.transpose(X, tuple(dim))
    if transpose_Y:
        if Y.ndim == 1:
            Y = Y.reshape((Y.size, ))
        else:
            dim = [i for i in range(len(Y.shape))]
            dim[-1], dim[len(Y.shape) - 2] = dim[len(Y.shape) - 2], dim[-1]
            Y = np.transpose(Y, tuple(dim))

    Out = np.matmul(X, Y)
    if not Out.shape:
        # We do not support 0-dimensional Tensors (scalars). So where
        # np.matmul outputs a scalar, we must convert to a Tensor of
        # shape (1, ) instead.
        # Everywhere else, we are compatible with np.matmul.
        Out = np.array([Out], dtype="float64")
    return Out


class TestMatMulV2Op(OpTest):
    """
    case 1
    """

    def config(self):
        self.x_shape = (100, )
        self.y_shape = (100, )
        self.trans_x = False
        self.trans_y = False

    def init_kernel_type(self):
        self.dtype = "float64"

    def setUp(self):
        self.init_kernel_type()
        self.config()
        self.op_type = "matmul_v2"
        x = np.random.random(self.x_shape).astype(self.dtype)
        y = np.random.random(self.y_shape).astype(self.dtype)
        # -0.1 ~ 0.1
        x = -0.1 + 0.2 * x
        y = -0.1 + 0.2 * y
        result = reference_matmul(x, y, self.trans_x, self.trans_y)
        result = result.astype(self.dtype)
        self.inputs = {
            'X': x,
            'Y': y,
        }
        self.attrs = {'trans_x': self.trans_x, 'trans_y': self.trans_y}
        self.outputs = {'Out': result}

    def test_check_output(self):
        self.check_output()

    def test_check_grad(self):
        self.check_grad(['X', 'Y'], 'Out')


class TestMatMuklOp2(TestMatMulV2Op):
    """
    case 2
    """

    def config(self):
        self.x_shape = (100, )
        self.y_shape = (1, 3, 2, 100)
        self.trans_x = False
        self.trans_y = True


class TestMatMuklOp3(TestMatMulV2Op):
    """
    case 3
    """

    def config(self):
        self.x_shape = (100, )
        self.y_shape = (1, 1, 100, 2)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp4(TestMatMulV2Op):
    """
    case 4
    """

    def config(self):
        self.x_shape = (100, )
        self.y_shape = (1, 2, 100, 2)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp5(TestMatMulV2Op):
    """
    case 5
    """

    def config(self):
        self.x_shape = (1, 1, 100, 1)
        self.y_shape = (100, )
        self.trans_x = True
        self.trans_y = False


class TestMatMuklOp6(TestMatMulV2Op):
    """
    case 6
    """

    def config(self):
        self.x_shape = (1, 2, 102, 1)
        self.y_shape = (102, )
        self.trans_x = True
        self.trans_y = False


class TestMatMuklOp7(TestMatMulV2Op):
    """
    case 7
    """

    def config(self):
        self.x_shape = (1, 2, 1, 100)
        self.y_shape = (100, )
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp8(TestMatMulV2Op):
    """
    case 8
    """

    def config(self):
        self.x_shape = (1, 1, 2, 100)
        self.y_shape = (1, 1, 100, 2)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp9(TestMatMulV2Op):
    """
    case 9
    """

    def config(self):
        self.x_shape = (1, 1, 1, 100)
        self.y_shape = (2, 1, 2, 100)
        self.trans_x = False
        self.trans_y = True


class TestMatMuklOp10(TestMatMulV2Op):
    """
    case 10
    """

    def config(self):
        self.x_shape = (1, 1, 25, 4)
        self.y_shape = (1, 2, 4, 25)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp11(TestMatMulV2Op):
    """
    case 11
    """

    def config(self):
        self.x_shape = (2, 1, 2, 100)
        self.y_shape = (1, 1, 100, 2)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp12(TestMatMulV2Op):
    """
    case 12
    """

    def config(self):
        self.x_shape = (2, 1, 4, 25)
        self.y_shape = (1, 1, 4, 25)
        self.trans_x = True
        self.trans_y = False


class TestMatMuklOp13(TestMatMulV2Op):
    """
    case 13
    """

    def config(self):
        self.x_shape = (2, 2, 10, 10)
        self.y_shape = (2, 2, 10, 10)
        self.trans_x = True
        self.trans_y = False


class TestMatMuklOp14(TestMatMulV2Op):
    """
    case 14_1
    """

    def config(self):
        self.x_shape = (3, 1, 6, 6)
        self.y_shape = (1, 2, 6, 9)
        self.trans_x = True
        self.trans_y = False


class TestMatMuklOp15(TestMatMulV2Op):
    """
    case 14_2
    """

    def config(self):
        self.x_shape = (3, 1, 6, 6)
        self.y_shape = (1, 2, 6, 9)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp16(TestMatMulV2Op):
    """
    case 16 : to check the gradient for special case
    """

    def config(self):
        self.x_shape = (100)
        self.y_shape = (1, 2, 2, 100, 2)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOp17(TestMatMulV2Op):
    """
    case 17 : to check the gradient for special case
    """

    def config(self):
        self.x_shape = (2, 1, 100)
        self.y_shape = (100)
        self.trans_x = False
        self.trans_y = False


class TestMatMuklOpBroadcast1(TestMatMulV2Op):
    """
    case 14_3
    """

    def config(self):
        self.x_shape = (3, 1, 10, 10)
        self.y_shape = (1, 2, 10, 10)
        self.trans_x = True
        self.trans_y = True


class TestMatMuklOpBroadcast2(TestMatMulV2Op):
    """
    case 14_4
    """

    def config(self):
        self.x_shape = (3, 1, 10, 10)
        self.y_shape = (1, 2, 10, 10)
        self.trans_x = False
        self.trans_y = True


#--------------------test matmul fp16--------------------


def create_test_fp16_class(parent, atol=0.001, max_relative_error=1.0):
    @unittest.skipIf(not core.is_compiled_with_cuda(),
                     "core is not compiled with CUDA")
    class TestMatMulOpFp16Case(parent):
        def init_kernel_type(self):
            self.dtype = np.float16

        def test_check_output(self):
            if core.is_compiled_with_cuda():
                place = core.CUDAPlace(0)
                if core.is_float16_supported(place):
                    self.check_output_with_place(place, atol=atol)

        def test_check_grad(self):
            place = core.CUDAPlace(0)
            if core.is_float16_supported(place):
                self.check_grad_with_place(
                    place, ['X', 'Y'],
                    'Out',
                    max_relative_error=max_relative_error)

    cls_name = "{0}_{1}".format(parent.__name__, "Fp16")
    TestMatMulOpFp16Case.__name__ = cls_name
    globals()[cls_name] = TestMatMulOpFp16Case


create_test_fp16_class(TestMatMulV2Op)
create_test_fp16_class(TestMatMuklOp2)
create_test_fp16_class(TestMatMuklOp3)
create_test_fp16_class(TestMatMuklOp4)
create_test_fp16_class(TestMatMuklOp5)
create_test_fp16_class(TestMatMuklOp6)
create_test_fp16_class(TestMatMuklOp7)
create_test_fp16_class(TestMatMuklOp8)
create_test_fp16_class(TestMatMuklOp9)
create_test_fp16_class(TestMatMuklOp10)
create_test_fp16_class(TestMatMuklOp11)
create_test_fp16_class(TestMatMuklOp12)
create_test_fp16_class(TestMatMuklOp13)
create_test_fp16_class(TestMatMuklOp14)
create_test_fp16_class(TestMatMuklOp15)
create_test_fp16_class(TestMatMuklOp16)
create_test_fp16_class(TestMatMuklOp17)


class TestMatMulV2API(unittest.TestCase):
    def setUp(self):
        self.places = [fluid.CPUPlace()]
        if core.is_compiled_with_cuda():
            self.places.append(fluid.CUDAPlace(0))

    def check_static_result(self, place):
        with fluid.program_guard(fluid.Program(), fluid.Program()):
            input_x = fluid.data(name="input_x", shape=[4, 3], dtype="float32")
            input_y = fluid.data(name="input_y", shape=[3, 4], dtype="float32")

            result = paddle.matmul(input_x, input_y)

            x_np = np.random.random([4, 3]).astype("float32")
            y_np = np.random.random([3, 4]).astype("float32")

            exe = fluid.Executor(place)
            fetches = exe.run(fluid.default_main_program(),
                              feed={"input_x": x_np,
                                    "input_y": y_np},
                              fetch_list=[result])

    def test_static(self):
        for place in self.places:
            self.check_static_result(place=place)

    def test_dygraph(self):
        for place in self.places:
            with fluid.dygraph.guard(place):
                input_x = np.random.random([4, 3]).astype("float64")
                input_y = np.random.random([3, 4]).astype("float64")
                x = paddle.to_tensor(input_x)
                y = paddle.to_tensor(input_y)
                result = paddle.matmul(x, y)

    def test_dygraph_fp16(self):
        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
            if core.is_float16_supported(place):
                with fluid.dygraph.guard(place):
                    input_x = np.random.random([4, 3]).astype("float16")
                    input_y = np.random.random([3, 4]).astype("float16")
                    x = paddle.to_tensor(input_x)
                    y = paddle.to_tensor(input_y)
                    result = paddle.matmul(x, y)


if __name__ == "__main__":
    unittest.main()