Skip to content

P
Paddle

PaddlePaddle / Paddle
大约 2 年 前同步成功

通知 2325
Star 20933
Fork 5424
P
Paddle
“0d8b37ce48bcb3cca2f5cb2d313908220e48a01d”上不存在“develop/doc/howto/cluster/introduction_en.html”
提交 7ef764b3 编写于 作者: T Travis CI
浏览文件
操作

Deploy to GitHub Pages: db341385

上级 1e116208
显示空白变更内容
内联 并排
Showing with 792 addition and 2 deletion
develop/doc/_sources/design/parameter_average.md.txt 0 → 100644
浏览文件 @ 7ef764b3
# Averaging Parameter in PaddlePaddle
## Why Averaging
In a large scale machine learning setup where the size of the training data is huge, it could take us a large number of iterations over the training data before we can achieve the optimal values of parameters of our model. Looking at the problem setup, it is desirable if we can obtain the optimal values of parameters by going through the data in as few passes as we can.
Polyak and Juditsky (1992) showed that the test performance of simple average of parameters obtained by Stochastic Gradient Descent (SGD) is as good as that of parameter values that are obtained by training the model over and over again, over the training dataset.
Hence, to accelerate the speed of Stochastic Gradient Descent, Averaged Stochastic Gradient Descent (ASGD) was proposed in Polyak and Juditsky (1992). For ASGD, the running average of parameters obtained by SGD, is used as the estimator for <img src="./images/theta_star.gif"/><br/> . The averaging is done as follows:
<img src="./images/asgd.gif" align="center"/><br/>
We propose averaging for any optimizer similar to how ASGD performs it, as mentioned above.
### How to perform Parameter Averaging in PaddlePaddle
Parameter Averaging in PaddlePaddle works in the following way during training :
1. It will take in an instance of a normal optimizer as an input, e.g. RMSPropOptimizer
2. The optimizer itself is responsible for updating the parameters.
3. The ParameterAverageOptimizer maintains a separate copy of the parameters for itself:
1. In concept, the values of this copy are the average of the values of the parameters in the most recent N batches.
2. However, saving all the N instances of the parameters in memory is not feasible.
3. Therefore, an approximation algorithm is used.
Hence, overall we have have two copies of the parameters: one for the optimizer itself, and one for the ParameterAverageOptimizer. The former should be used in back propagation, while the latter should be used during testing and should be saved.
During the testing/ saving the model phase, we perform the following steps:
1. Perform the delayed operations.
2. Save current values of the parameters to a temporary variable.
3. Replace the values of the parameters with the averaged values.
4. Perform testing and/or save the parameters.
5. Restore the values of the parameters once done.
### How to implement Averaging of Parameter in PaddlePaddle
We can add the ParameterAverageOptimizer op to the graph through Python API. Using this approach, we manually add this op to the graph and direct the output of the optimizer op to this op during training.
**Advantages**:
- Allows for greater flexibility to the users of PaddlePaddle. Using this approach, the users can plug different optimizers into ParameterAverageOptimizer by passing in the optimizer to the op.
- Makes it easy for the users to customize and extend the framework.
**Disadvantages**:
- Implementation requires re-writing the averaging methodology in Python.
### Low-Level implementation
In the new design, we propose to create a new operation for averaging parameter updates (ParameterAverageOptimizer). For now, we can add an op that takes in the following as input:
- the optimizer
- the window_size to keep the updates
The ParameterAverageOptimizer op can be like any other operator with its own CPU/GPU implementation either using Eigen or separate CPU and GPU kernels. As the initial implementation, we can implement the kernel using Eigen following the abstraction pattern implemented for [Operators](https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.h). We also want to support the case when the Trainer/Optimizer runs on the GPU while ParameterAverageOptimizer runs on a CPU.
The idea of building an op for averaging is in sync with the refactored PaddlePaddle philosophy of using operators to represent any computation unit. The way the op will be added to the computation graph will be decided by the [layer functions](https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function) in Python API.
### Python API implementation for ParameterAverageOptimizer
Based on Polyak and Juditsky (1992), we can generalize the averaging of updates to any optimizer. The input to the op would be the following:
- Any optimizer (RMSProp , AdaGrad etc.)
- A window size. The op keeps accumulating updated parameter values over a window of N batches and takes an average. Move the averaged value to a buffer when window is full to avoid loss of precision.
Using the ParameterAverageOptimizer op, any user can add the operation to their computation graphs. However, this will require a lot of lines of code and we should design Python APIs that support averaging. As per the PaddlePaddle [Python API design](https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md), the layer functions are responsible for creating operators, operator parameters and variables. Since ParameterAverageOptimizer will be an operator, it makes sense to create it in the layer functions.
We will have a wrapper written in Python that will support the functionality and implement the actual core computation in C++ core as we have done for other [Optimizers](https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.cc)
#### Creation of the ParameterAverageOptimizer operator
There are two ways for creating the ParameterAverageOptimizer op:
1. We create the op immediately while building the computation graph.
2. We add the op in a lazy manner, just before the backward pass, similar to the way the optimization ops are added.
The proposal is to add the op immediately while building the computation graph.
#### High-level API
In PaddlePaddle Python API, users will primarily rely on [layer functions](https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function) to create neural network layers. Hence, we also need to provide parameter average functionality in layer functions.
develop/doc/design/parameter_average.html 0 → 100644
浏览文件 @ 7ef764b3
<!DOCTYPE html>
<!--[if IE 8]><html class="no-js lt-ie9" lang="en" > <![endif]-->
<!--[if gt IE 8]><!--> <html class="no-js" lang="en" > <!--<![endif]-->
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<title>Averaging Parameter in PaddlePaddle &mdash; PaddlePaddle documentation</title>
<link rel="stylesheet" href="../_static/css/theme.css" type="text/css" />
<link rel="index" title="Index"
href="../genindex.html"/>
<link rel="search" title="Search" href="../search.html"/>
<link rel="top" title="PaddlePaddle documentation" href="../index.html"/>
<link rel="stylesheet" href="https://cdn.jsdelivr.net/perfect-scrollbar/0.6.14/css/perfect-scrollbar.min.css" type="text/css" />
<link rel="stylesheet" href="../_static/css/override.css" type="text/css" />
<script>
var _hmt = _hmt || [];
(function() {
var hm = document.createElement("script");
hm.src = "//hm.baidu.com/hm.js?b9a314ab40d04d805655aab1deee08ba";
var s = document.getElementsByTagName("script")[0];
s.parentNode.insertBefore(hm, s);
})();
</script>
<script src="../_static/js/modernizr.min.js"></script>
</head>
<body class="wy-body-for-nav" role="document">
<header class="site-header">
<div class="site-logo">
<a href="/"><img src="../_static/images/PP_w.png"></a>
</div>
<div class="site-nav-links">
<div class="site-menu">
<a class="fork-on-github" href="https://github.com/PaddlePaddle/Paddle" target="_blank"><i class="fa fa-github"></i>Fork me on Github</a>
<div class="language-switcher dropdown">
<a type="button" data-toggle="dropdown">
<span>English</span>
<i class="fa fa-angle-up"></i>
<i class="fa fa-angle-down"></i>
</a>
<ul class="dropdown-menu">
<li><a href="/doc_cn">中文</a></li>
<li><a href="/doc">English</a></li>
</ul>
</div>
<ul class="site-page-links">
<li><a href="/">Home</a></li>
</ul>
</div>
<div class="doc-module">
<ul>
<li class="toctree-l1"><a class="reference internal" href="../getstarted/index_en.html">GET STARTED</a></li>
<li class="toctree-l1"><a class="reference internal" href="../howto/index_en.html">HOW TO</a></li>
<li class="toctree-l1"><a class="reference internal" href="../api/index_en.html">API</a></li>
</ul>
<div role="search">
<form id="rtd-search-form" class="wy-form" action="../search.html" method="get">
<input type="text" name="q" placeholder="Search docs" />
<input type="hidden" name="check_keywords" value="yes" />
<input type="hidden" name="area" value="default" />
</form>
</div>
</div>
</div>
</header>
<div class="main-content-wrap">
<nav class="doc-menu-vertical" role="navigation">
<ul>
<li class="toctree-l1"><a class="reference internal" href="../getstarted/index_en.html">GET STARTED</a><ul>
<li class="toctree-l2"><a class="reference internal" href="../getstarted/build_and_install/index_en.html">Install and Build</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../getstarted/build_and_install/docker_install_en.html">PaddlePaddle in Docker Containers</a></li>
<li class="toctree-l3"><a class="reference internal" href="../getstarted/build_and_install/build_from_source_en.html">Installing from Sources</a></li>
</ul>
</li>
</ul>
</li>
<li class="toctree-l1"><a class="reference internal" href="../howto/index_en.html">HOW TO</a><ul>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/cmd_parameter/index_en.html">Set Command-line Parameters</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../howto/usage/cmd_parameter/use_case_en.html">Use Case</a></li>
<li class="toctree-l3"><a class="reference internal" href="../howto/usage/cmd_parameter/arguments_en.html">Argument Outline</a></li>
<li class="toctree-l3"><a class="reference internal" href="../howto/usage/cmd_parameter/detail_introduction_en.html">Detail Description</a></li>
</ul>
</li>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/cluster/cluster_train_en.html">PaddlePaddle Distributed Training</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/k8s/k8s_en.html">Paddle On Kubernetes</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/k8s/k8s_aws_en.html">Distributed PaddlePaddle Training on AWS with Kubernetes</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/dev/build_en.html">Build PaddlePaddle from Source Code and Run Unit Test</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/dev/new_layer_en.html">Write New Layers</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/dev/contribute_to_paddle_en.html">Contribute Code</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/deep_model/rnn/index_en.html">RNN Models</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../howto/deep_model/rnn/rnn_config_en.html">RNN Configuration</a></li>
</ul>
</li>
<li class="toctree-l2"><a class="reference internal" href="../howto/optimization/gpu_profiling_en.html">Tune GPU Performance</a></li>
</ul>
</li>
<li class="toctree-l1"><a class="reference internal" href="../api/index_en.html">API</a><ul>
<li class="toctree-l2"><a class="reference internal" href="../api/v2/model_configs.html">Model Configuration</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/activation.html">Activation</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/layer.html">Layers</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/evaluators.html">Evaluators</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/optimizer.html">Optimizer</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/pooling.html">Pooling</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/networks.html">Networks</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/attr.html">Parameter Attribute</a></li>
</ul>
</li>
<li class="toctree-l2"><a class="reference internal" href="../api/v2/data.html">Data Reader Interface and DataSets</a></li>
<li class="toctree-l2"><a class="reference internal" href="../api/v2/run_logic.html">Training and Inference</a></li>
</ul>
</li>
</ul>
</nav>
<section class="doc-content-wrap">
<div role="navigation" aria-label="breadcrumbs navigation">
<ul class="wy-breadcrumbs">
<li>Averaging Parameter in PaddlePaddle</li>
</ul>
</div>
<div class="wy-nav-content" id="doc-content">
<div class="rst-content">
<div role="main" class="document" itemscope="itemscope" itemtype="http://schema.org/Article">
<div itemprop="articleBody">
<div class="section" id="averaging-parameter-in-paddlepaddle">
<span id="averaging-parameter-in-paddlepaddle"></span><h1>Averaging Parameter in PaddlePaddle<a class="headerlink" href="#averaging-parameter-in-paddlepaddle" title="Permalink to this headline"></a></h1>
<div class="section" id="why-averaging">
<span id="why-averaging"></span><h2>Why Averaging<a class="headerlink" href="#why-averaging" title="Permalink to this headline"></a></h2>
<p>In a large scale machine learning setup where the size of the training data is huge, it could take us a large number of iterations over the training data before we can achieve the optimal values of parameters of our model. Looking at the problem setup, it is desirable if we can obtain the optimal values of parameters by going through the data in as few passes as we can.</p>
<p>Polyak and Juditsky (1992) showed that the test performance of simple average of parameters obtained by Stochastic Gradient Descent (SGD) is as good as that of parameter values that are obtained by training the model over and over again, over the training dataset.</p>
<p>Hence, to accelerate the speed of Stochastic Gradient Descent, Averaged Stochastic Gradient Descent (ASGD) was proposed in Polyak and Juditsky (1992). For ASGD, the running average of parameters obtained by SGD, is used as the estimator for <img src="./images/theta_star.gif"/><br/> . The averaging is done as follows:</p>
<p><img src="./images/asgd.gif" align="center"/><br/></p>
<p>We propose averaging for any optimizer similar to how ASGD performs it, as mentioned above.</p>
<div class="section" id="how-to-perform-parameter-averaging-in-paddlepaddle">
<span id="how-to-perform-parameter-averaging-in-paddlepaddle"></span><h3>How to perform Parameter Averaging in PaddlePaddle<a class="headerlink" href="#how-to-perform-parameter-averaging-in-paddlepaddle" title="Permalink to this headline"></a></h3>
<p>Parameter Averaging in PaddlePaddle works in the following way during training :</p>
<ol class="simple">
<li>It will take in an instance of a normal optimizer as an input, e.g. RMSPropOptimizer</li>
<li>The optimizer itself is responsible for updating the parameters.</li>
<li>The ParameterAverageOptimizer maintains a separate copy of the parameters for itself:<ol>
<li>In concept, the values of this copy are the average of the values of the parameters in the most recent N batches.</li>
<li>However, saving all the N instances of the parameters in memory is not feasible.</li>
<li>Therefore, an approximation algorithm is used.</li>
</ol>
</li>
</ol>
<p>Hence, overall we have have two copies of the parameters: one for the optimizer itself, and one for the ParameterAverageOptimizer. The former should be used in back propagation, while the latter should be used during testing and should be saved.</p>
<p>During the testing/ saving the model phase, we perform the following steps:</p>
<ol class="simple">
<li>Perform the delayed operations.</li>
<li>Save current values of the parameters to a temporary variable.</li>
<li>Replace the values of the parameters with the averaged values.</li>
<li>Perform testing and/or save the parameters.</li>
<li>Restore the values of the parameters once done.</li>
</ol>
</div>
<div class="section" id="how-to-implement-averaging-of-parameter-in-paddlepaddle">
<span id="how-to-implement-averaging-of-parameter-in-paddlepaddle"></span><h3>How to implement Averaging of Parameter in PaddlePaddle<a class="headerlink" href="#how-to-implement-averaging-of-parameter-in-paddlepaddle" title="Permalink to this headline"></a></h3>
<p>We can add the ParameterAverageOptimizer op to the graph through Python API. Using this approach, we manually add this op to the graph and direct the output of the optimizer op to this op during training.</p>
<div class="highlight-default"><div class="highlight"><pre><span></span><span class="o">**</span><span class="n">Advantages</span><span class="o">**</span><span class="p">:</span>
<span class="o">-</span> <span class="n">Allows</span> <span class="k">for</span> <span class="n">greater</span> <span class="n">flexibility</span> <span class="n">to</span> <span class="n">the</span> <span class="n">users</span> <span class="n">of</span> <span class="n">PaddlePaddle</span><span class="o">.</span> <span class="n">Using</span> <span class="n">this</span> <span class="n">approach</span><span class="p">,</span> <span class="n">the</span> <span class="n">users</span> <span class="n">can</span> <span class="n">plug</span> <span class="n">different</span> <span class="n">optimizers</span> <span class="n">into</span> <span class="n">ParameterAverageOptimizer</span> <span class="n">by</span> <span class="n">passing</span> <span class="ow">in</span> <span class="n">the</span> <span class="n">optimizer</span> <span class="n">to</span> <span class="n">the</span> <span class="n">op</span><span class="o">.</span>
<span class="o">-</span> <span class="n">Makes</span> <span class="n">it</span> <span class="n">easy</span> <span class="k">for</span> <span class="n">the</span> <span class="n">users</span> <span class="n">to</span> <span class="n">customize</span> <span class="ow">and</span> <span class="n">extend</span> <span class="n">the</span> <span class="n">framework</span><span class="o">.</span>
<span class="o">**</span><span class="n">Disadvantages</span><span class="o">**</span><span class="p">:</span>
<span class="o">-</span> <span class="n">Implementation</span> <span class="n">requires</span> <span class="n">re</span><span class="o">-</span><span class="n">writing</span> <span class="n">the</span> <span class="n">averaging</span> <span class="n">methodology</span> <span class="ow">in</span> <span class="n">Python</span><span class="o">.</span>
</pre></div>
</div>
</div>
<div class="section" id="low-level-implementation">
<span id="low-level-implementation"></span><h3>Low-Level implementation<a class="headerlink" href="#low-level-implementation" title="Permalink to this headline"></a></h3>
<p>In the new design, we propose to create a new operation for averaging parameter updates (ParameterAverageOptimizer). For now, we can add an op that takes in the following as input:</p>
<ul class="simple">
<li>the optimizer</li>
<li>the window_size to keep the updates</li>
</ul>
<p>The ParameterAverageOptimizer op can be like any other operator with its own CPU/GPU implementation either using Eigen or separate CPU and GPU kernels. As the initial implementation, we can implement the kernel using Eigen following the abstraction pattern implemented for <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.h">Operators</a>. We also want to support the case when the Trainer/Optimizer runs on the GPU while ParameterAverageOptimizer runs on a CPU.</p>
<p>The idea of building an op for averaging is in sync with the refactored PaddlePaddle philosophy of using operators to represent any computation unit. The way the op will be added to the computation graph will be decided by the <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function">layer functions</a> in Python API.</p>
</div>
<div class="section" id="python-api-implementation-for-parameteraverageoptimizer">
<span id="python-api-implementation-for-parameteraverageoptimizer"></span><h3>Python API implementation for ParameterAverageOptimizer<a class="headerlink" href="#python-api-implementation-for-parameteraverageoptimizer" title="Permalink to this headline"></a></h3>
<p>Based on Polyak and Juditsky (1992), we can generalize the averaging of updates to any optimizer. The input to the op would be the following:</p>
<ul class="simple">
<li>Any optimizer (RMSProp , AdaGrad etc.)</li>
<li>A window size. The op keeps accumulating updated parameter values over a window of N batches and takes an average. Move the averaged value to a buffer when window is full to avoid loss of precision.</li>
</ul>
<p>Using the ParameterAverageOptimizer op, any user can add the operation to their computation graphs. However, this will require a lot of lines of code and we should design Python APIs that support averaging. As per the PaddlePaddle <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md">Python API design</a>, the layer functions are responsible for creating operators, operator parameters and variables. Since ParameterAverageOptimizer will be an operator, it makes sense to create it in the layer functions.
We will have a wrapper written in Python that will support the functionality and implement the actual core computation in C++ core as we have done for other <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.cc">Optimizers</a></p>
<div class="section" id="creation-of-the-parameteraverageoptimizer-operator">
<span id="creation-of-the-parameteraverageoptimizer-operator"></span><h4>Creation of the ParameterAverageOptimizer operator<a class="headerlink" href="#creation-of-the-parameteraverageoptimizer-operator" title="Permalink to this headline"></a></h4>
<p>There are two ways for creating the ParameterAverageOptimizer op:</p>
<ol class="simple">
<li>We create the op immediately while building the computation graph.</li>
<li>We add the op in a lazy manner, just before the backward pass, similar to the way the optimization ops are added.</li>
</ol>
<p>The proposal is to add the op immediately while building the computation graph.</p>
</div>
<div class="section" id="high-level-api">
<span id="high-level-api"></span><h4>High-level API<a class="headerlink" href="#high-level-api" title="Permalink to this headline"></a></h4>
<p>In PaddlePaddle Python API, users will primarily rely on <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function">layer functions</a> to create neural network layers. Hence, we also need to provide parameter average functionality in layer functions.</p>
</div>
</div>
</div>
</div>
</div>
</div>
<footer>
<hr/>
<div role="contentinfo">
<p>
&copy; Copyright 2016, PaddlePaddle developers.
</p>
</div>
Built with <a href="http://sphinx-doc.org/">Sphinx</a> using a <a href="https://github.com/snide/sphinx_rtd_theme">theme</a> provided by <a href="https://readthedocs.org">Read the Docs</a>.
</footer>
</div>
</div>
</section>
</div>
<script type="text/javascript">
var DOCUMENTATION_OPTIONS = {
URL_ROOT:'../',
VERSION:'',
COLLAPSE_INDEX:false,
FILE_SUFFIX:'.html',
HAS_SOURCE: true,
SOURCELINK_SUFFIX: ".txt",
};
</script>
<script type="text/javascript" src="../_static/jquery.js"></script>
<script type="text/javascript" src="../_static/underscore.js"></script>
<script type="text/javascript" src="../_static/doctools.js"></script>
<script type="text/javascript" src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.0/MathJax.js?config=TeX-AMS-MML_HTMLorMML"></script>
<script type="text/javascript" src="../_static/js/theme.js"></script>
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js" integrity="sha384-Tc5IQib027qvyjSMfHjOMaLkfuWVxZxUPnCJA7l2mCWNIpG9mGCD8wGNIcPD7Txa" crossorigin="anonymous"></script>
<script src="https://cdn.jsdelivr.net/perfect-scrollbar/0.6.14/js/perfect-scrollbar.jquery.min.js"></script>
<script src="../_static/js/paddle_doc_init.js"></script>
</body>
</html>
\ No newline at end of file
develop/doc/searchindex.js
浏览文件 @ 7ef764b3
因为 它太大了无法显示 source diff 。你可以改为 查看blob。
develop/doc_cn/_sources/design/parameter_average.md.txt 0 → 100644
浏览文件 @ 7ef764b3
# Averaging Parameter in PaddlePaddle
## Why Averaging
In a large scale machine learning setup where the size of the training data is huge, it could take us a large number of iterations over the training data before we can achieve the optimal values of parameters of our model. Looking at the problem setup, it is desirable if we can obtain the optimal values of parameters by going through the data in as few passes as we can.
Polyak and Juditsky (1992) showed that the test performance of simple average of parameters obtained by Stochastic Gradient Descent (SGD) is as good as that of parameter values that are obtained by training the model over and over again, over the training dataset.
Hence, to accelerate the speed of Stochastic Gradient Descent, Averaged Stochastic Gradient Descent (ASGD) was proposed in Polyak and Juditsky (1992). For ASGD, the running average of parameters obtained by SGD, is used as the estimator for <img src="./images/theta_star.gif"/><br/> . The averaging is done as follows:
<img src="./images/asgd.gif" align="center"/><br/>
We propose averaging for any optimizer similar to how ASGD performs it, as mentioned above.
### How to perform Parameter Averaging in PaddlePaddle
Parameter Averaging in PaddlePaddle works in the following way during training :
1. It will take in an instance of a normal optimizer as an input, e.g. RMSPropOptimizer
2. The optimizer itself is responsible for updating the parameters.
3. The ParameterAverageOptimizer maintains a separate copy of the parameters for itself:
1. In concept, the values of this copy are the average of the values of the parameters in the most recent N batches.
2. However, saving all the N instances of the parameters in memory is not feasible.
3. Therefore, an approximation algorithm is used.
Hence, overall we have have two copies of the parameters: one for the optimizer itself, and one for the ParameterAverageOptimizer. The former should be used in back propagation, while the latter should be used during testing and should be saved.
During the testing/ saving the model phase, we perform the following steps:
1. Perform the delayed operations.
2. Save current values of the parameters to a temporary variable.
3. Replace the values of the parameters with the averaged values.
4. Perform testing and/or save the parameters.
5. Restore the values of the parameters once done.
### How to implement Averaging of Parameter in PaddlePaddle
We can add the ParameterAverageOptimizer op to the graph through Python API. Using this approach, we manually add this op to the graph and direct the output of the optimizer op to this op during training.
**Advantages**:
- Allows for greater flexibility to the users of PaddlePaddle. Using this approach, the users can plug different optimizers into ParameterAverageOptimizer by passing in the optimizer to the op.
- Makes it easy for the users to customize and extend the framework.
**Disadvantages**:
- Implementation requires re-writing the averaging methodology in Python.
### Low-Level implementation
In the new design, we propose to create a new operation for averaging parameter updates (ParameterAverageOptimizer). For now, we can add an op that takes in the following as input:
- the optimizer
- the window_size to keep the updates
The ParameterAverageOptimizer op can be like any other operator with its own CPU/GPU implementation either using Eigen or separate CPU and GPU kernels. As the initial implementation, we can implement the kernel using Eigen following the abstraction pattern implemented for [Operators](https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.h). We also want to support the case when the Trainer/Optimizer runs on the GPU while ParameterAverageOptimizer runs on a CPU.
The idea of building an op for averaging is in sync with the refactored PaddlePaddle philosophy of using operators to represent any computation unit. The way the op will be added to the computation graph will be decided by the [layer functions](https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function) in Python API.
### Python API implementation for ParameterAverageOptimizer
Based on Polyak and Juditsky (1992), we can generalize the averaging of updates to any optimizer. The input to the op would be the following:
- Any optimizer (RMSProp , AdaGrad etc.)
- A window size. The op keeps accumulating updated parameter values over a window of N batches and takes an average. Move the averaged value to a buffer when window is full to avoid loss of precision.
Using the ParameterAverageOptimizer op, any user can add the operation to their computation graphs. However, this will require a lot of lines of code and we should design Python APIs that support averaging. As per the PaddlePaddle [Python API design](https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md), the layer functions are responsible for creating operators, operator parameters and variables. Since ParameterAverageOptimizer will be an operator, it makes sense to create it in the layer functions.
We will have a wrapper written in Python that will support the functionality and implement the actual core computation in C++ core as we have done for other [Optimizers](https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.cc)
#### Creation of the ParameterAverageOptimizer operator
There are two ways for creating the ParameterAverageOptimizer op:
1. We create the op immediately while building the computation graph.
2. We add the op in a lazy manner, just before the backward pass, similar to the way the optimization ops are added.
The proposal is to add the op immediately while building the computation graph.
#### High-level API
In PaddlePaddle Python API, users will primarily rely on [layer functions](https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function) to create neural network layers. Hence, we also need to provide parameter average functionality in layer functions.
develop/doc_cn/design/parameter_average.html 0 → 100644
浏览文件 @ 7ef764b3
<!DOCTYPE html>
<!--[if IE 8]><html class="no-js lt-ie9" lang="en" > <![endif]-->
<!--[if gt IE 8]><!--> <html class="no-js" lang="en" > <!--<![endif]-->
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<title>Averaging Parameter in PaddlePaddle &mdash; PaddlePaddle 文档</title>
<link rel="stylesheet" href="../_static/css/theme.css" type="text/css" />
<link rel="index" title="索引"
href="../genindex.html"/>
<link rel="search" title="搜索" href="../search.html"/>
<link rel="top" title="PaddlePaddle 文档" href="../index.html"/>
<link rel="stylesheet" href="https://cdn.jsdelivr.net/perfect-scrollbar/0.6.14/css/perfect-scrollbar.min.css" type="text/css" />
<link rel="stylesheet" href="../_static/css/override.css" type="text/css" />
<script>
var _hmt = _hmt || [];
(function() {
var hm = document.createElement("script");
hm.src = "//hm.baidu.com/hm.js?b9a314ab40d04d805655aab1deee08ba";
var s = document.getElementsByTagName("script")[0];
s.parentNode.insertBefore(hm, s);
})();
</script>
<script src="../_static/js/modernizr.min.js"></script>
</head>
<body class="wy-body-for-nav" role="document">
<header class="site-header">
<div class="site-logo">
<a href="/"><img src="../_static/images/PP_w.png"></a>
</div>
<div class="site-nav-links">
<div class="site-menu">
<a class="fork-on-github" href="https://github.com/PaddlePaddle/Paddle" target="_blank"><i class="fa fa-github"></i>Fork me on Github</a>
<div class="language-switcher dropdown">
<a type="button" data-toggle="dropdown">
<span>English</span>
<i class="fa fa-angle-up"></i>
<i class="fa fa-angle-down"></i>
</a>
<ul class="dropdown-menu">
<li><a href="/doc_cn">中文</a></li>
<li><a href="/doc">English</a></li>
</ul>
</div>
<ul class="site-page-links">
<li><a href="/">Home</a></li>
</ul>
</div>
<div class="doc-module">
<ul>
<li class="toctree-l1"><a class="reference internal" href="../getstarted/index_cn.html">新手入门</a></li>
<li class="toctree-l1"><a class="reference internal" href="../howto/index_cn.html">进阶指南</a></li>
<li class="toctree-l1"><a class="reference internal" href="../api/index_cn.html">API</a></li>
<li class="toctree-l1"><a class="reference internal" href="../faq/index_cn.html">FAQ</a></li>
</ul>
<div role="search">
<form id="rtd-search-form" class="wy-form" action="../search.html" method="get">
<input type="text" name="q" placeholder="Search docs" />
<input type="hidden" name="check_keywords" value="yes" />
<input type="hidden" name="area" value="default" />
</form>
</div>
</div>
</div>
</header>
<div class="main-content-wrap">
<nav class="doc-menu-vertical" role="navigation">
<ul>
<li class="toctree-l1"><a class="reference internal" href="../getstarted/index_cn.html">新手入门</a><ul>
<li class="toctree-l2"><a class="reference internal" href="../getstarted/build_and_install/index_cn.html">安装与编译</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../getstarted/build_and_install/docker_install_cn.html">PaddlePaddle的Docker容器使用方式</a></li>
<li class="toctree-l3"><a class="reference internal" href="../getstarted/build_and_install/cmake/build_from_source_cn.html">PaddlePaddle的编译选项</a></li>
</ul>
</li>
<li class="toctree-l2"><a class="reference internal" href="../getstarted/concepts/use_concepts_cn.html">基本使用概念</a></li>
</ul>
</li>
<li class="toctree-l1"><a class="reference internal" href="../howto/index_cn.html">进阶指南</a><ul>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/cmd_parameter/index_cn.html">设置命令行参数</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../howto/usage/cmd_parameter/use_case_cn.html">使用案例</a></li>
<li class="toctree-l3"><a class="reference internal" href="../howto/usage/cmd_parameter/arguments_cn.html">参数概述</a></li>
<li class="toctree-l3"><a class="reference internal" href="../howto/usage/cmd_parameter/detail_introduction_cn.html">细节描述</a></li>
</ul>
</li>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/cluster/cluster_train_cn.html">PaddlePaddle分布式训练</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/k8s/k8s_basis_cn.html">Kubernetes 简介</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/k8s/k8s_cn.html">Kubernetes单机训练</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/usage/k8s/k8s_distributed_cn.html">Kubernetes分布式训练</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/dev/build_cn.html">编译PaddlePaddle和运行单元测试</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/dev/write_docs_cn.html">如何贡献/修改文档</a></li>
<li class="toctree-l2"><a class="reference internal" href="../howto/deep_model/rnn/index_cn.html">RNN相关模型</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../howto/deep_model/rnn/rnn_config_cn.html">RNN配置</a></li>
<li class="toctree-l3"><a class="reference internal" href="../howto/deep_model/rnn/recurrent_group_cn.html">Recurrent Group教程</a></li>
<li class="toctree-l3"><a class="reference internal" href="../howto/deep_model/rnn/hierarchical_layer_cn.html">支持双层序列作为输入的Layer</a></li>
<li class="toctree-l3"><a class="reference internal" href="../howto/deep_model/rnn/hrnn_rnn_api_compare_cn.html">单双层RNN API对比介绍</a></li>
</ul>
</li>
<li class="toctree-l2"><a class="reference internal" href="../howto/optimization/gpu_profiling_cn.html">GPU性能分析与调优</a></li>
</ul>
</li>
<li class="toctree-l1"><a class="reference internal" href="../api/index_cn.html">API</a><ul>
<li class="toctree-l2"><a class="reference internal" href="../api/v2/model_configs.html">模型配置</a><ul>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/activation.html">Activation</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/layer.html">Layers</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/evaluators.html">Evaluators</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/optimizer.html">Optimizer</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/pooling.html">Pooling</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/networks.html">Networks</a></li>
<li class="toctree-l3"><a class="reference internal" href="../api/v2/config/attr.html">Parameter Attribute</a></li>
</ul>
</li>
<li class="toctree-l2"><a class="reference internal" href="../api/v2/data.html">数据访问</a></li>
<li class="toctree-l2"><a class="reference internal" href="../api/v2/run_logic.html">训练与应用</a></li>
</ul>
</li>
<li class="toctree-l1"><a class="reference internal" href="../faq/index_cn.html">FAQ</a><ul>
<li class="toctree-l2"><a class="reference internal" href="../faq/build_and_install/index_cn.html">编译安装与单元测试</a></li>
<li class="toctree-l2"><a class="reference internal" href="../faq/model/index_cn.html">模型配置</a></li>
<li class="toctree-l2"><a class="reference internal" href="../faq/parameter/index_cn.html">参数设置</a></li>
<li class="toctree-l2"><a class="reference internal" href="../faq/local/index_cn.html">本地训练与预测</a></li>
<li class="toctree-l2"><a class="reference internal" href="../faq/cluster/index_cn.html">集群训练与预测</a></li>
</ul>
</li>
</ul>
</nav>
<section class="doc-content-wrap">
<div role="navigation" aria-label="breadcrumbs navigation">
<ul class="wy-breadcrumbs">
<li>Averaging Parameter in PaddlePaddle</li>
</ul>
</div>
<div class="wy-nav-content" id="doc-content">
<div class="rst-content">
<div role="main" class="document" itemscope="itemscope" itemtype="http://schema.org/Article">
<div itemprop="articleBody">
<div class="section" id="averaging-parameter-in-paddlepaddle">
<span id="averaging-parameter-in-paddlepaddle"></span><h1>Averaging Parameter in PaddlePaddle<a class="headerlink" href="#averaging-parameter-in-paddlepaddle" title="永久链接至标题"></a></h1>
<div class="section" id="why-averaging">
<span id="why-averaging"></span><h2>Why Averaging<a class="headerlink" href="#why-averaging" title="永久链接至标题"></a></h2>
<p>In a large scale machine learning setup where the size of the training data is huge, it could take us a large number of iterations over the training data before we can achieve the optimal values of parameters of our model. Looking at the problem setup, it is desirable if we can obtain the optimal values of parameters by going through the data in as few passes as we can.</p>
<p>Polyak and Juditsky (1992) showed that the test performance of simple average of parameters obtained by Stochastic Gradient Descent (SGD) is as good as that of parameter values that are obtained by training the model over and over again, over the training dataset.</p>
<p>Hence, to accelerate the speed of Stochastic Gradient Descent, Averaged Stochastic Gradient Descent (ASGD) was proposed in Polyak and Juditsky (1992). For ASGD, the running average of parameters obtained by SGD, is used as the estimator for <img src="./images/theta_star.gif"/><br/> . The averaging is done as follows:</p>
<p><img src="./images/asgd.gif" align="center"/><br/></p>
<p>We propose averaging for any optimizer similar to how ASGD performs it, as mentioned above.</p>
<div class="section" id="how-to-perform-parameter-averaging-in-paddlepaddle">
<span id="how-to-perform-parameter-averaging-in-paddlepaddle"></span><h3>How to perform Parameter Averaging in PaddlePaddle<a class="headerlink" href="#how-to-perform-parameter-averaging-in-paddlepaddle" title="永久链接至标题"></a></h3>
<p>Parameter Averaging in PaddlePaddle works in the following way during training :</p>
<ol class="simple">
<li>It will take in an instance of a normal optimizer as an input, e.g. RMSPropOptimizer</li>
<li>The optimizer itself is responsible for updating the parameters.</li>
<li>The ParameterAverageOptimizer maintains a separate copy of the parameters for itself:<ol>
<li>In concept, the values of this copy are the average of the values of the parameters in the most recent N batches.</li>
<li>However, saving all the N instances of the parameters in memory is not feasible.</li>
<li>Therefore, an approximation algorithm is used.</li>
</ol>
</li>
</ol>
<p>Hence, overall we have have two copies of the parameters: one for the optimizer itself, and one for the ParameterAverageOptimizer. The former should be used in back propagation, while the latter should be used during testing and should be saved.</p>
<p>During the testing/ saving the model phase, we perform the following steps:</p>
<ol class="simple">
<li>Perform the delayed operations.</li>
<li>Save current values of the parameters to a temporary variable.</li>
<li>Replace the values of the parameters with the averaged values.</li>
<li>Perform testing and/or save the parameters.</li>
<li>Restore the values of the parameters once done.</li>
</ol>
</div>
<div class="section" id="how-to-implement-averaging-of-parameter-in-paddlepaddle">
<span id="how-to-implement-averaging-of-parameter-in-paddlepaddle"></span><h3>How to implement Averaging of Parameter in PaddlePaddle<a class="headerlink" href="#how-to-implement-averaging-of-parameter-in-paddlepaddle" title="永久链接至标题"></a></h3>
<p>We can add the ParameterAverageOptimizer op to the graph through Python API. Using this approach, we manually add this op to the graph and direct the output of the optimizer op to this op during training.</p>
<div class="highlight-default"><div class="highlight"><pre><span></span><span class="o">**</span><span class="n">Advantages</span><span class="o">**</span><span class="p">:</span>
<span class="o">-</span> <span class="n">Allows</span> <span class="k">for</span> <span class="n">greater</span> <span class="n">flexibility</span> <span class="n">to</span> <span class="n">the</span> <span class="n">users</span> <span class="n">of</span> <span class="n">PaddlePaddle</span><span class="o">.</span> <span class="n">Using</span> <span class="n">this</span> <span class="n">approach</span><span class="p">,</span> <span class="n">the</span> <span class="n">users</span> <span class="n">can</span> <span class="n">plug</span> <span class="n">different</span> <span class="n">optimizers</span> <span class="n">into</span> <span class="n">ParameterAverageOptimizer</span> <span class="n">by</span> <span class="n">passing</span> <span class="ow">in</span> <span class="n">the</span> <span class="n">optimizer</span> <span class="n">to</span> <span class="n">the</span> <span class="n">op</span><span class="o">.</span>
<span class="o">-</span> <span class="n">Makes</span> <span class="n">it</span> <span class="n">easy</span> <span class="k">for</span> <span class="n">the</span> <span class="n">users</span> <span class="n">to</span> <span class="n">customize</span> <span class="ow">and</span> <span class="n">extend</span> <span class="n">the</span> <span class="n">framework</span><span class="o">.</span>
<span class="o">**</span><span class="n">Disadvantages</span><span class="o">**</span><span class="p">:</span>
<span class="o">-</span> <span class="n">Implementation</span> <span class="n">requires</span> <span class="n">re</span><span class="o">-</span><span class="n">writing</span> <span class="n">the</span> <span class="n">averaging</span> <span class="n">methodology</span> <span class="ow">in</span> <span class="n">Python</span><span class="o">.</span>
</pre></div>
</div>
</div>
<div class="section" id="low-level-implementation">
<span id="low-level-implementation"></span><h3>Low-Level implementation<a class="headerlink" href="#low-level-implementation" title="永久链接至标题"></a></h3>
<p>In the new design, we propose to create a new operation for averaging parameter updates (ParameterAverageOptimizer). For now, we can add an op that takes in the following as input:</p>
<ul class="simple">
<li>the optimizer</li>
<li>the window_size to keep the updates</li>
</ul>
<p>The ParameterAverageOptimizer op can be like any other operator with its own CPU/GPU implementation either using Eigen or separate CPU and GPU kernels. As the initial implementation, we can implement the kernel using Eigen following the abstraction pattern implemented for <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.h">Operators</a>. We also want to support the case when the Trainer/Optimizer runs on the GPU while ParameterAverageOptimizer runs on a CPU.</p>
<p>The idea of building an op for averaging is in sync with the refactored PaddlePaddle philosophy of using operators to represent any computation unit. The way the op will be added to the computation graph will be decided by the <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function">layer functions</a> in Python API.</p>
</div>
<div class="section" id="python-api-implementation-for-parameteraverageoptimizer">
<span id="python-api-implementation-for-parameteraverageoptimizer"></span><h3>Python API implementation for ParameterAverageOptimizer<a class="headerlink" href="#python-api-implementation-for-parameteraverageoptimizer" title="永久链接至标题"></a></h3>
<p>Based on Polyak and Juditsky (1992), we can generalize the averaging of updates to any optimizer. The input to the op would be the following:</p>
<ul class="simple">
<li>Any optimizer (RMSProp , AdaGrad etc.)</li>
<li>A window size. The op keeps accumulating updated parameter values over a window of N batches and takes an average. Move the averaged value to a buffer when window is full to avoid loss of precision.</li>
</ul>
<p>Using the ParameterAverageOptimizer op, any user can add the operation to their computation graphs. However, this will require a lot of lines of code and we should design Python APIs that support averaging. As per the PaddlePaddle <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md">Python API design</a>, the layer functions are responsible for creating operators, operator parameters and variables. Since ParameterAverageOptimizer will be an operator, it makes sense to create it in the layer functions.
We will have a wrapper written in Python that will support the functionality and implement the actual core computation in C++ core as we have done for other <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/paddle/operators/rmsprop_op.cc">Optimizers</a></p>
<div class="section" id="creation-of-the-parameteraverageoptimizer-operator">
<span id="creation-of-the-parameteraverageoptimizer-operator"></span><h4>Creation of the ParameterAverageOptimizer operator<a class="headerlink" href="#creation-of-the-parameteraverageoptimizer-operator" title="永久链接至标题"></a></h4>
<p>There are two ways for creating the ParameterAverageOptimizer op:</p>
<ol class="simple">
<li>We create the op immediately while building the computation graph.</li>
<li>We add the op in a lazy manner, just before the backward pass, similar to the way the optimization ops are added.</li>
</ol>
<p>The proposal is to add the op immediately while building the computation graph.</p>
</div>
<div class="section" id="high-level-api">
<span id="high-level-api"></span><h4>High-level API<a class="headerlink" href="#high-level-api" title="永久链接至标题"></a></h4>
<p>In PaddlePaddle Python API, users will primarily rely on <a class="reference external" href="https://github.com/PaddlePaddle/Paddle/blob/develop/doc/design/python_api.md#layer-function">layer functions</a> to create neural network layers. Hence, we also need to provide parameter average functionality in layer functions.</p>
</div>
</div>
</div>
</div>
</div>
</div>
<footer>
<hr/>
<div role="contentinfo">
<p>
&copy; Copyright 2016, PaddlePaddle developers.
</p>
</div>
Built with <a href="http://sphinx-doc.org/">Sphinx</a> using a <a href="https://github.com/snide/sphinx_rtd_theme">theme</a> provided by <a href="https://readthedocs.org">Read the Docs</a>.
</footer>
</div>
</div>
</section>
</div>
<script type="text/javascript">
var DOCUMENTATION_OPTIONS = {
URL_ROOT:'../',
VERSION:'',
COLLAPSE_INDEX:false,
FILE_SUFFIX:'.html',
HAS_SOURCE: true,
SOURCELINK_SUFFIX: ".txt",
};
</script>
<script type="text/javascript" src="../_static/jquery.js"></script>
<script type="text/javascript" src="../_static/underscore.js"></script>
<script type="text/javascript" src="../_static/doctools.js"></script>
<script type="text/javascript" src="../_static/translations.js"></script>
<script type="text/javascript" src="https://cdn.bootcss.com/mathjax/2.7.0/MathJax.js"></script>
<script type="text/javascript" src="../_static/js/theme.js"></script>
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js" integrity="sha384-Tc5IQib027qvyjSMfHjOMaLkfuWVxZxUPnCJA7l2mCWNIpG9mGCD8wGNIcPD7Txa" crossorigin="anonymous"></script>
<script src="https://cdn.jsdelivr.net/perfect-scrollbar/0.6.14/js/perfect-scrollbar.jquery.min.js"></script>
<script src="../_static/js/paddle_doc_init.js"></script>
</body>
</html>
\ No newline at end of file
develop/doc_cn/searchindex.js
浏览文件 @ 7ef764b3
因为 它太大了无法显示 source diff 。你可以改为 查看blob。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或