Memory Optimization¶
+Problem¶
+In a lecture from Andrew Ng, he attributes the recent sucess of AI due to a combination of these:
+-
+
- availability of Big Data +
- supercomputing power to process this Big Data over very large neural networks +
- modern algorithms +
Following graph shows the details:
+
Larger model usually brings better performance. However, GPU memory is certain limited. For example, the memory size of a GTX TITAN X is only 12GB. To train complex and large model, we have to take care of memory using. Besides, memory optimization is also necessary in both online/mobile inference.
+Solution¶
+Basic Strategy¶
+There are some basic strategies to make memory optimization, including in-place operation and memory sharing.
+In-place Operation¶
+In a relu activation operator：
+$y = \max(x, 0)$
+If the variable x is not used in any other operator, we can make an in-place operation. In other words, the memory block of variable y and variable x are the same. In-place operation will save 50% memory occupancy immediately.
+Memory Sharing¶
+Not all operators support in-place operations. Memory sharing is a more general strategy.
+Following is an example:
+a = op1(b, c);
+d = op2(a)
+e = op3(d, f)
+In this case, variable a is no longer used, and op2 does not support in-place operation. After op2 finished, we can put the memory of variable a to a memory pool. Then, variable e can share the memory of variable a from the pool.
+Live Variable Analysis¶
+It’s not enough to only have some basic strategies. The prerequisite of memory optimization is to know if a variable is still “live” after an operation.
+In our design, the neural network topology is defined as a program. Luckily, live variable analysis is a classic problem in compilers which can be used in many stages, such as register allocation.
+In compilers, the front end of the compilers translates programs into an intermediate language with an unbounded number of temporaries. This program must run on a machine with a bounded number of registers. Two temporaries a and b can fit into the same register, if a and b are never “in use” at the same time. Thus, many temporaries can fit in few registers; if they don’t all fit, the excess temporaries can be kept in memory.
+Therefore, the compiler needs to analyze the intermediate-representation program to determine which temporaries are in use at the same time. We say a variable is “live” if it holds a value that may be needed in the future, so this analysis is called liveness analysis.
+We can leran these techniques from compilers. There are mainly two stages to make live variable analysis:
+-
+
- construct a control flow graph +
- solve the dataflow equations +
Control Flow Graph¶
+To preform analyses on a program, it is often useful to make a control flow graph. A control flow graph (CFG) in computer science is a representation, using graph notation, of all paths that might be traversed through a program during its execution. Each statement in the program is a node in the flow graph; if statemment x can be followed by statement y, there is an egde from x to y.
+Following is the flow graph for a simple loop.
+
Dataflow Analysis¶
+liveness of variable “flows” around the edges of the control flow graph; determining the live range of each variable is an example of a dataflow problem. Dataflow analysis is a technique for gathering information about the possible set of values calculated at various points in a computer program.
+A simple way to perform data-flow analysis of programs is to set up dataflow equations for each node of the control flow graph and solve them by repeatedly calculating the output from the input locally at each node until the whole system stabilizes.
+-
+
- Flow Graph Terminology +
A flow graph node has out-edges that lead to sucessor nodes, and in-edges that come from presucessor nodes. The set pred[n] is all the predecessors of node n, and succ[n] is the set of sucessors. +In former control flow graph, the out-edges of node 5 are 5 –> 6 and 5 –> 2, and succ[5] = {2, 6}. The in-edges of 2 are 5 –> 2 and 1 –> 2, and pred[2] = {1, 5}.
+-
+
- Uses and Defs +
An assignmemt to a variable or temporary defines that variable. An occurence of a variable on the right-hand side of an assginment(or in other expressions) uses the variable. We can speak the def of a variable as the set of graph nodes that define it; or the def of a graph node as the set of variables that it defines; and the similarly for the use of a variable or graph node. In former control flow graph, def(3) = {c}, use(3) = {b, c}.
+-
+
- Liveness +
A variable is live on an edge if there is a directed path from that edge to a use of the variable that does not go through any def. A variable is live-in at a node if it is live on any of the in-edges of that node; it is live-out at a node if it is live on any of the out-edges of the node.
+The calcution of liveness can be solved by iteration until a fixed pointer is reached. Following is the recursive formula:
+
Memory optimization transpiler¶
+At last, we take basic strategy and liveness analysis techniques learning from compilers to implement our memory optimization transpiler.
+add in-place attribute¶
+In-place is a built-in attribute of an operator. Since we treat in-place and other operators differently, we have to add an in-place attribute for every operator.
+contruct control flow graph¶
+Following is the ProgramDesc protobuf of machine translation example.
+-
+
- Block0: +
lookup_table
+mul
+...
+while(sub-block idx 1)
+...
+array_to_lod_tensor
+cross_entropy
+...
+while_grad(sub-block idx 2)
+read_from_array
+array_to_lod_tensor
+...
+-
+
- Block1 +
read_from_array
+read_from_array
+...
+write_to_array
+increment
+write_to_array
+less_than
+-
+
- Block2 +
read_from_array
+increment
+...
+write_to_array
+write_to_array
+We can transfer all the operators and variables in ProgramDesc to build a control flow graph.
+class ControlFlowGraph(object):
+ def __init__(self, Program):
+ self._sucessors = defaultdict(set)
+ self._presucessors = defaultdict(set)
+ self._uses = defaultdict(set)
+ self._defs = defaultdict(set)
+ self._live_in = defaultdict(set)
+ self._live_out = defaultdict(set)
+ self._program = Program
+
+ def build(self):
+ pass
+
+ def dataflow_analysis(self):
+ pass
+
+ def memory_optimization(self):
+ pass
+
+ def get_program(self):
+ return self._program
+make dataflow analysis¶
+We follow guide from compilers and try to solve the dataflow equation to get liveness of every variable. If the live-in of an operator node is different from the live-out, then we can make memory sharing.
+For example:
+a = op1(b, c);
+d = op2(a)
+e = op3(d, f)
+The dataflow analysis result is:
+live_in(op1) = {b, c, f}
+live_out(op1) = {a, f}
+
+live_in(op2) = {a, f}
+live_out(op2) = {d, f}
+
+live_in(op3) = {d, f}
+live_out(op3) = {}
+After op1, we can process variable b and variable c; After op2, we can process variable a. After op3, we can process variable d and variable f.
+memory sharing policy¶
+A memory pool will be mantained in the stage of memory optimization. Each operator node will be scanned to determine memory optimization is done or not. If an operator satifies the requirement, following policy will be taken to handle input/output variables.
+if op.support_inplace():
+ i --> pool
+ pool --> o
+else:
+ pool --> o
+ i --> pool
+Reference¶
+-
+
- Lecture Notes From Artificial Intelligence Is The New Electricity By Andrew Ng +
- Modern compiler implementation in ML, by Andrew W. Appel +
- Optimizing Memory Consumption in Deep learning +