fastboot: ARM: OMAP5: Enable reboot-bootloader

Implemented fb_set_reboot_flag() for OMAP5 to set
an environment variable 'dofastboot' when reboot-bootloader called.

This environment variable will be checked in boot command and fastboot
will be called if the variable is set.
If the bootcmd env variable of OMAP5 common is overwritten with board-specific
command, then these changes will not apply.

This was originally intended for DRA7 platform, but now applies to all OMAP5.

Ref:
http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=19da2e436e9806259cf1f4988b9e046ab256bf2cSigned-off-by: NAngela Stegmaier <angelabaker@ti.com>
Signed-off-by: NDileep Katta <dileep.katta@linaro.org>
Reviewed-by: NTom Rini <trini@konsulko.com>
[trini: Make it check for !CONFIG_ENV_IS_NOWHERE as we can't saveenv()
in that case]
Signed-off-by: NTom Rini <trini@konsulko.com>

arch/arm/cpu/armv7/omap-common/boot-common.c

@@ -162,3 +162,13 @@ void arch_preboot_os(void)
 	ahci_reset((void __iomem *)DWC_AHSATA_BASE);
 }
 #endif
+
+#if defined(CONFIG_CMD_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE)
+int fb_set_reboot_flag(void)
+{
+	printf("Setting reboot to fastboot flag ...\n");
+	setenv("dofastboot", "1");
+	saveenv();
+	return 0;
+}
+#endif

include/configs/ti_omap5_common.h

@@ -144,13 +144,20 @@
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
 	DFUARGS \
 
+
 #define CONFIG_BOOTCOMMAND \
+	"if test ${dofastboot} -eq 1; then " \
+		"echo Boot fastboot requested, resetting dofastboot ...;" \
+		"setenv dofastboot 0; saveenv;" \
+		"echo Booting into fastboot ...; fastboot;" \
+	"fi;" \
 	"run findfdt; " \
 	"run mmcboot;" \
 	"setenv mmcdev 1; " \
 	"setenv bootpart 1:2; " \
 	"setenv mmcroot /dev/mmcblk0p2 rw; " \
 	"run mmcboot;" \
+	""
 
 
 /*