Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig

Move this option to Kconfig and tidy up existing uses.
Signed-off-by: NSimon Glass <sjg@chromium.org>

arch/arm/cpu/armv7/omap3/Kconfig

@@ -30,6 +30,9 @@ config SPL_NAND_SUPPORT
 config SPL_POWER_SUPPORT
 	default y
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 choice
 	prompt "OMAP3 board select"
 	optional

arch/arm/cpu/armv7/omap4/Kconfig

@@ -30,6 +30,9 @@ config SPL_NAND_SUPPORT
 config SPL_POWER_SUPPORT
 	default y
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 choice
 	prompt "OMAP4 board select"
 	optional

arch/arm/cpu/armv7/omap5/Kconfig

@@ -30,6 +30,9 @@ config SPL_NAND_SUPPORT
 config SPL_POWER_SUPPORT
 	default y
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 choice
 	prompt "OMAP5 board select"
 	optional

arch/arm/cpu/armv8/zynqmp/Kconfig

@@ -15,6 +15,9 @@ config SPL_LIBGENERIC_SUPPORT
 config SPL_MMC_SUPPORT
 	default y
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 config SYS_BOARD
 	default "zynqmp"
 

arch/arm/mach-rockchip/rk3036/Kconfig

@@ -12,6 +12,9 @@ config SYS_SOC
 config SYS_MALLOC_F_LEN
 	default 0x400
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 source "board/rockchip/evb_rk3036/Kconfig"
 source "board/rockchip/kylin_rk3036/Kconfig"
 

arch/arm/mach-rockchip/rk3288/Kconfig

@@ -84,6 +84,9 @@ config SPL_LIBGENERIC_SUPPORT
 config SPL_MMC_SUPPORT
 	default y
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 source "board/chipspark/popmetal_rk3288/Kconfig"
 
 source "board/firefly/firefly-rk3288/Kconfig"

arch/arm/mach-socfpga/Kconfig

@@ -15,6 +15,9 @@ config SPL_MMC_SUPPORT
 config SPL_NAND_SUPPORT
 	default y if SPL_NAND_DENALI
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 config TARGET_SOCFPGA_ARRIA5
 	bool
 	select TARGET_SOCFPGA_GEN5

arch/arm/mach-tegra/Kconfig

@@ -9,6 +9,9 @@ config SPL_LIBCOMMON_SUPPORT
 config SPL_LIBGENERIC_SUPPORT
 	default y
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 config TEGRA_IVC
 	bool "Tegra IVC protocol"
 	help

arch/arm/mach-uniphier/Kconfig

@@ -12,6 +12,9 @@ config SPL_MMC_SUPPORT
 config SPL_NAND_SUPPORT
 	default y if !ARM64
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 config SYS_CONFIG_NAME
 	default "uniphier"
 

arch/arm/mach-zynq/Kconfig

@@ -15,6 +15,9 @@ config SPL_LIBGENERIC_SUPPORT
 config SPL_MMC_SUPPORT
 	default y if ZYNQ_SDHCI
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 config SYS_BOARD
 	default "zynq"
 

board/sunxi/Kconfig

@@ -18,6 +18,9 @@ config SPL_MMC_SUPPORT
 config SPL_POWER_SUPPORT
 	default y
 
+config SPL_SERIAL_SUPPORT
+	default y
+
 # Note only one of these may be selected at a time! But hidden choices are
 # not supported by Kconfig
 config SUNXI_GEN_SUN4I

board/ti/common/Kconfig

@@ -36,3 +36,6 @@ config SPL_NAND_SUPPORT
 
 config SPL_POWER_SUPPORT
 	default y
+
+config SPL_SERIAL_SUPPORT
+	default y

configs/B4420QDS_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_SF=y

configs/B4860QDS_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_SF=y

configs/BSC9131RDB_NAND_SYSCLK100_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9131RDB=y
 CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/BSC9131RDB_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9131RDB=y
 CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/BSC9132QDS_NAND_DDRCLK100_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
 CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/BSC9132QDS_NAND_DDRCLK133_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
 CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/C29XPCIE_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
 CONFIG_FIT=y
@@ -10,12 +12,12 @@ CONFIG_BOOTDELAY=-1
 CONFIG_SPL=y
 CONFIG_TPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y

configs/MPC8313ERDB_NAND_33_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8313ERDB=y
 CONFIG_OF_BOARD_SETUP=y
@@ -6,7 +8,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ,NAND"
 CONFIG_BOOTDELAY=6
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_GPIO=y

configs/MPC8313ERDB_NAND_66_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8313ERDB=y
 CONFIG_OF_BOARD_SETUP=y
@@ -6,7 +8,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ,NAND"
 CONFIG_BOOTDELAY=6
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_GPIO=y

configs/P1010RDB-PA_36BIT_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB=y
@@ -11,12 +13,12 @@ CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1010RDB-PA_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1010RDB-PA_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB=y
@@ -10,12 +12,12 @@ CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1010RDB-PA_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1010RDB-PA_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1010RDB-PB_36BIT_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB=y
@@ -11,12 +13,12 @@ CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1010RDB-PB_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1010RDB-PB_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB=y
@@ -9,7 +11,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
@@ -17,6 +18,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1010RDB-PB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1010RDB-PB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y

configs/P1020MBG-PC_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020MBG-PC_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020RDB-PC_36BIT_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_PHYS_64BIT=y
@@ -9,13 +11,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1020RDB-PC_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020RDB-PC_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1020RDB-PC_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020RDB-PC_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020RDB-PD_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1020RDB-PD_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020RDB-PD_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020UTM-PC_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1020UTM-PC_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1021RDB-PC_36BIT_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_PHYS_64BIT=y
@@ -9,13 +11,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1021RDB-PC_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1021RDB-PC_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1021RDB-PC_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1021RDB-PC_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1022DS_36BIT_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y
 CONFIG_PHYS_64BIT=y
@@ -9,13 +11,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1022DS_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y

configs/P1022DS_36BIT_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y

configs/P1022DS_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y
 CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
@@ -16,6 +17,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1022DS_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y

configs/P1022DS_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y

configs/P1024RDB_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1024RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1024RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1025RDB_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_FIT=y
@@ -9,13 +11,13 @@ CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P1025RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P1025RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P2020RDB-PC_36BIT_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_PHYS_64BIT=y
@@ -9,7 +11,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
@@ -17,6 +18,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P2020RDB-PC_36BIT_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P2020RDB-PC_NAND_defconfig

 CONFIG_PPC=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y
 CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/P2020RDB-PC_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/P2020RDB-PC_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1_P2_RDB_PC=y

configs/T1023RDB_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_GREPENV=y

configs/T1023RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XRDB=y

configs/T1023RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XRDB=y

configs/T1024QDS_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XQDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T1024QDS_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XQDS=y

configs/T1024QDS_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XQDS=y

configs/T1024RDB_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y

configs/T1024RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XRDB=y

configs/T1024RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T102XRDB=y

configs/T1040D4RDB_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T1040D4RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T1040D4RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T1040RDB_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T1040RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T1040RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T1042D4RDB_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T1042D4RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T1042D4RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y
@@ -16,7 +18,6 @@ CONFIG_SPL_CRYPTO_SUPPORT=y
 CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T1042RDB_PI_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T1042RDB_PI_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T1042RDB_PI_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T104XRDB=y

configs/T2080QDS_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XQDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T2080QDS_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XQDS=y

configs/T2080QDS_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XQDS=y

configs/T2080RDB_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MMC=y

configs/T2080RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XRDB=y

configs/T2080RDB_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XRDB=y

configs/T2081QDS_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XQDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T2081QDS_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XQDS=y

configs/T2081QDS_SPIFLASH_defconfig

@@ -2,6 +2,7 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T208XQDS=y

configs/T4160QDS_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T4240QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T4160QDS_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T4240QDS=y

configs/T4240QDS_NAND_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T4240QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/T4240QDS_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T4240QDS=y

configs/T4240RDB_SDCARD_defconfig

@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T4240RDB=y

configs/a3m071_defconfig

 CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC5xxx=y
 CONFIG_TARGET_A3M071=y

configs/a4m2k_defconfig

 CONFIG_PPC=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC5xxx=y
 CONFIG_TARGET_A3M071=y

configs/am335x_baltos_defconfig

@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y

configs/am335x_igep0033_defconfig

@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/am335x_shc_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SERIES=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_FIT=y

configs/am335x_shc_ict_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SHC_ICT=y
 CONFIG_SERIES=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000

configs/am335x_shc_netboot_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SHC_NETBOOT=y
 CONFIG_SERIES=y

configs/am335x_shc_prompt_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SERIES=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_FIT=y

configs/am335x_shc_sdboot_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SHC_SDBOOT=y
 CONFIG_SERIES=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000

configs/am335x_shc_sdboot_prompt_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SHC_SDBOOT=y
 CONFIG_SERIES=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000

configs/am335x_sl50_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_FIT=y

configs/apf27_defconfig

 CONFIG_ARM=y
 CONFIG_TARGET_APF27=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=5
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="BIOS> "
 # CONFIG_CMD_IMLS is not set

configs/apx4devkit_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_APX4DEVKIT=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/at91sam9m10g45ek_mmc_defconfig

@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/at91sam9m10g45ek_nandflash_defconfig

@@ -4,10 +4,11 @@ CONFIG_TARGET_AT91SAM9M10G45EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set

configs/at91sam9n12ek_nandflash_defconfig

@@ -4,10 +4,11 @@ CONFIG_TARGET_AT91SAM9N12EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y

configs/at91sam9n12ek_spiflash_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_AT91SAM9N12EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/at91sam9x5ek_nandflash_defconfig

@@ -4,10 +4,11 @@ CONFIG_TARGET_AT91SAM9X5EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y

configs/at91sam9x5ek_spiflash_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_AT91SAM9X5EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/axm_defconfig

@@ -4,11 +4,12 @@ CONFIG_TARGET_TAURUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y

configs/bg0900_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_BG0900=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/birdland_bav335a_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BAV_VERSION=1
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"

configs/birdland_bav335b_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BAV_VERSION=2
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"

configs/brppt1_mmc_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
 CONFIG_BOOTDELAY=-2

configs/brppt1_nand_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
 CONFIG_BOOTDELAY=-2

configs/brppt1_spi_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
 CONFIG_SPI_BOOT=y

configs/brxre1_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
 CONFIG_BOOTDELAY=-2
 CONFIG_VERSION_VARIABLE=y

configs/cgtqmx6eval_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/clearfog_defconfig

@@ -6,6 +6,7 @@ CONFIG_TARGET_CLEARFOG=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/cm_fx6_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_CM_FX6=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
 CONFIG_BOOTDELAY=3

configs/cm_t335_defconfig

@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
 CONFIG_SPL_MTD_SUPPORT=y

configs/cm_t43_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
 CONFIG_SPL_MTD_SUPPORT=y

configs/corvus_defconfig

@@ -4,11 +4,12 @@ CONFIG_TARGET_CORVUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set

configs/da850_am18xxevm_defconfig

@@ -3,6 +3,7 @@ CONFIG_ARCH_DAVINCI=y
 CONFIG_TARGET_DA850EVM=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50"
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y

configs/da850evm_defconfig

@@ -3,6 +3,7 @@ CONFIG_ARCH_DAVINCI=y
 CONFIG_TARGET_DA850EVM=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y

configs/db-88f6720_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_DB_88F6720=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-375-db"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_BOOTDELAY=3

configs/db-88f6820-gp_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_DB_88F6820_GP=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/db-mv784mp-gp_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_DB_MV784MP_GP=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_BOOTDELAY=3

configs/devkit3250_defconfig

@@ -2,11 +2,12 @@ CONFIG_ARM=y
 CONFIG_TARGET_DEVKIT3250=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y

configs/draco_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/ds414_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_DS414=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/edminiv2_defconfig

@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ORION5X=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TARGET_EDMINIV2=y
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/etamin_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/gwventana_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x18000000
 CONFIG_DM_SERIAL=y
 CONFIG_FIT=y

configs/ipam390_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

configs/k2e_evm_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_K2E_EVM=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="k2e-evm"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_VERSION_VARIABLE=y

configs/k2g_evm_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_K2G_EVM=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="k2g-evm"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_VERSION_VARIABLE=y

configs/k2hk_evm_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_K2HK_EVM=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="k2hk-evm"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_VERSION_VARIABLE=y

configs/k2l_evm_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_K2L_EVM=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="k2l-evm"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_VERSION_VARIABLE=y

configs/ls1021aqds_nand_defconfig

@@ -3,6 +3,8 @@ CONFIG_TARGET_LS1021AQDS=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_FIT=y
@@ -14,7 +16,6 @@ CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y

configs/ls1021aqds_sdcard_ifc_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"

configs/ls1021aqds_sdcard_qspi_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"

configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_FIT=y

configs/ls1021atwr_sdcard_ifc_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y

configs/ls1021atwr_sdcard_qspi_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
 CONFIG_FIT=y

configs/ls1043aqds_nand_defconfig

@@ -3,6 +3,8 @@ CONFIG_TARGET_LS1043AQDS=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
@@ -14,7 +16,6 @@ CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y

configs/ls1043aqds_sdcard_ifc_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"

configs/ls1043aqds_sdcard_qspi_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"

configs/ls1043ardb_nand_defconfig

@@ -3,6 +3,8 @@ CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
@@ -14,7 +16,6 @@ CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y

configs/ls1043ardb_sdcard_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"

configs/ls2080aqds_nand_defconfig

@@ -3,6 +3,8 @@ CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
@@ -14,7 +16,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, NAND, LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/ls2080ardb_nand_defconfig

@@ -3,6 +3,8 @@ CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_FIT=y
@@ -13,7 +15,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, NAND, LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y

configs/m28evk_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_M28EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y

configs/m53evk_defconfig

@@ -3,12 +3,13 @@ CONFIG_TARGET_M53EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/denx/m53evk/imximage.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_ASKENV=y

configs/ma5d4evk_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_MA5D4EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4"
 CONFIG_BOOTDELAY=3

configs/maxbcm_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_MAXBCM=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-maxbcm"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/microblaze-generic_defconfig

 CONFIG_MICROBLAZE=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TARGET_MICROBLAZE_GENERIC=y
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1

configs/mx23_olinuxino_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_MX23_OLINUXINO=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/mx23evk_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_MX23EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/mx28evk_auart_console_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC"
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y

configs/mx28evk_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC"
 CONFIG_BOOTDELAY=1

configs/mx28evk_nand_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_NAND"
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y

configs/mx28evk_spi_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_SPI_FLASH"
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y

configs/mx31pdk_defconfig

 CONFIG_ARM=y
 CONFIG_TARGET_MX31PDK=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=1
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_SPI=y

configs/mx6cuboxi_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

configs/mx6sabresd_spl_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/mx6slevk_spl_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/mx6sxsabresd_spl_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/mx6ul_14x14_evk_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/mx6ul_9x9_evk_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/novena_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
 CONFIG_VERSION_VARIABLE=y

configs/omapl138_lcdk_defconfig

@@ -3,6 +3,7 @@ CONFIG_ARCH_DAVINCI=y
 CONFIG_TARGET_OMAPL138_LCDK=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/ot1200_spl_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_OT1200=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/pcm051_rev1_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="REV1"
 CONFIG_VERSION_VARIABLE=y

configs/pcm051_rev3_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="REV3"
 CONFIG_VERSION_VARIABLE=y

configs/pcm058_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3

configs/pengwyn_defconfig

@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/pepper_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_HUSH_PARSER=y

configs/picosam9g45_defconfig

@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/platinum_picon_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/platinum_titanium_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/pxm2_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50"
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3

configs/rastaban_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/rut_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-rut"
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3

configs/sama5d2_ptc_nandflash_defconfig

@@ -4,10 +4,11 @@ CONFIG_TARGET_SAMA5D2_PTC=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_LOADS is not set

configs/sama5d2_ptc_spiflash_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D2_PTC=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/sama5d2_xplained_mmc_defconfig

@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3

configs/sama5d2_xplained_spiflash_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D2_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH"
 CONFIG_BOOTDELAY=3

configs/sama5d3_xplained_mmc_defconfig

@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3

configs/sama5d3_xplained_nandflash_defconfig

@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D3_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set

configs/sama5d3xek_mmc_defconfig

@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3

configs/sama5d3xek_nandflash_defconfig

@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D3XEK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set

configs/sama5d3xek_spiflash_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D3XEK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH"
 CONFIG_BOOTDELAY=3

configs/sama5d4_xplained_mmc_defconfig

@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3

configs/sama5d4_xplained_nandflash_defconfig

@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D4_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set

configs/sama5d4_xplained_spiflash_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D4_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
 CONFIG_BOOTDELAY=3

configs/sama5d4ek_mmc_defconfig

@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3

configs/sama5d4ek_nandflash_defconfig

@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D4EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set

configs/sama5d4ek_spiflash_defconfig

@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D4EK=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
 CONFIG_BOOTDELAY=3

configs/sandbox_spl_defconfig

 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MMC=y

configs/sansa_fuze_plus_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_SANSA_FUZE_PLUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/sc_sps_1_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_SC_SPS_1=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/taurus_defconfig

@@ -4,11 +4,12 @@ CONFIG_TARGET_TAURUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set

configs/theadorable_debug_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_THEADORABLE=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y

configs/theadorable_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_THEADORABLE=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y

configs/thuban_defconfig

@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/ti814x_evm_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=1
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/ti816x_evm_defconfig

@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/udoo_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/wandboard_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y

configs/woodburn_sd_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/work_92105_defconfig

@@ -2,11 +2,12 @@ CONFIG_ARM=y
 CONFIG_TARGET_WORK_92105=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/x600_defconfig

@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_X600=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
 CONFIG_SPL_NOR_SUPPORT=y

configs/xfi3_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_XFI3=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y

configs/xpress_spl_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/zc5202_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

configs/zc5601_defconfig

@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y

include/configs/B4860QDS.h

@@ -21,7 +21,6 @@
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
 #else
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */

include/configs/BSC9131RDB.h

@@ -28,7 +28,6 @@
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"

include/configs/BSC9132QDS.h

@@ -44,7 +44,6 @@
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"

include/configs/C29XPCIE.h

@@ -28,7 +28,6 @@
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_TPL_SERIAL_SUPPORT
 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
@@ -40,7 +39,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE		0xff800000

include/configs/MPC8313ERDB.h

@@ -22,7 +22,6 @@
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND

include/configs/P1010RDB.h

@@ -19,7 +19,6 @@
 #define CONFIG_NAND_FSL_IFC
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
@@ -46,7 +45,6 @@
 #define CONFIG_SYS_TEXT_BASE		0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
 #else
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -73,7 +71,6 @@
 #ifdef CONFIG_NAND
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
@@ -93,7 +90,6 @@
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_TPL_SERIAL_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xD0001000
@@ -104,7 +100,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE		0xff800000

include/configs/P1022DS.h

@@ -14,7 +14,6 @@
 #define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
@@ -36,7 +35,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -68,7 +66,6 @@
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_TPL_SERIAL_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
@@ -79,7 +76,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE		0xff800000
 #define CONFIG_SPL_MAX_SIZE		4096

include/configs/T102xQDS.h

@@ -43,7 +43,6 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW			/* Use common FSL init code */

include/configs/T102xRDB.h

@@ -50,7 +50,6 @@
 #elif defined(CONFIG_T1023RDB)
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg
 #endif
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW			/* Use common FSL init code */

include/configs/T104xRDB.h

@@ -43,7 +43,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg
 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */

include/configs/T208xQDS.h

@@ -53,7 +53,6 @@
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg
 #endif
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW			/* Use common FSL init code */

include/configs/T208xRDB.h

@@ -42,7 +42,6 @@
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW			/* Use common FSL init code */

include/configs/T4240QDS.h

@@ -25,7 +25,6 @@
 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
 #else
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */

include/configs/T4240RDB.h

@@ -25,7 +25,6 @@
 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
 #else
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */

include/configs/a3m071.h

@@ -398,7 +398,6 @@
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_TEXT_BASE	0xfc000000
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* Place BSS for SPL near end of SDRAM */
 #define CONFIG_SPL_BSS_START_ADDR	((128 - 1) << 20)

include/configs/am3517_crane.h

@@ -287,7 +287,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC

include/configs/am3517_evm.h

@@ -344,7 +344,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC

include/configs/apf27.h

@@ -38,7 +38,6 @@
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE	2048
 #define CONFIG_SPL_TEXT_BASE    0xA0000000
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE

include/configs/at91sam9m10g45ek.h

@@ -186,8 +186,6 @@
 #define CONFIG_SPL_MAX_SIZE		0x010000
 #define CONFIG_SPL_STACK		0x310000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SYS_MONITOR_LEN		0x80000
 
 #ifdef CONFIG_SYS_USE_MMC

include/configs/at91sam9n12ek.h

@@ -230,8 +230,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/at91sam9x5ek.h

@@ -230,8 +230,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/bur_am335x_common.h

@@ -112,7 +112,6 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 
 /* General parts of the framework, required. */
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_YMODEM_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"

include/configs/clearfog.h

@@ -123,8 +123,6 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 /* SPL related SPI defines */
 #define CONFIG_SPL_SPI_SUPPORT

include/configs/cm_t35.h

@@ -306,7 +306,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC

include/configs/corvus.h

@@ -160,8 +160,6 @@
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE

include/configs/da850evm.h

@@ -342,7 +342,6 @@
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_TEXT_BASE	0x80000000

include/configs/db-88f6720.h

@@ -91,8 +91,6 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 /* SPL related SPI defines */
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT

include/configs/db-88f6820-gp.h

@@ -124,8 +124,6 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 /* SPL related SPI defines */
 #define CONFIG_SPL_SPI_SUPPORT

include/configs/db-mv784mp-gp.h

@@ -116,8 +116,6 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 /* SPL related SPI defines */
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT

include/configs/devkit3250.h

@@ -195,7 +195,6 @@
 #define CONFIG_SPL_FRAMEWORK
 
 /* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* SPL loads an image from NAND */
 #define CONFIG_SPL_NAND_SIMPLE

include/configs/ds414.h

@@ -122,8 +122,6 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 /* SPL related SPI defines */
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT

include/configs/edminiv2.h

@@ -17,7 +17,6 @@
  */
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_TEXT_BASE		0xffff0000
 #define CONFIG_SPL_MAX_SIZE		0x0000fff0
 #define CONFIG_SPL_STACK		0x00020000

include/configs/imx6_spl.h

@@ -29,7 +29,6 @@
 #define CONFIG_SPL_TEXT_BASE		0x00908000
 #define CONFIG_SPL_MAX_SIZE		0x10000
 #define CONFIG_SPL_STACK		0x0091FFB8
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT
 
 /* NAND support */

include/configs/ipam390.h

@@ -284,7 +284,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
 						CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_TEXT_BASE	0x80000000

include/configs/kc1.h

@@ -129,8 +129,6 @@
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 #define CONFIG_SPL_BOARD_INIT
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION	2
 
 /*

include/configs/ls1021aqds.h

@@ -68,7 +68,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x600
 
@@ -99,7 +98,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000

include/configs/ls1021atwr.h

@@ -113,7 +113,6 @@
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
 
 #ifdef CONFIG_SECURE_BOOT

include/configs/ls1043a_common.h

@@ -61,7 +61,6 @@
 #define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xf0
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x500
 
@@ -85,7 +84,6 @@
 #define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000

include/configs/ls2080a_common.h

@@ -268,7 +268,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE		0x16000
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_STACK		(CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE		0x1800a000

include/configs/m53evk.h

@@ -239,7 +239,6 @@
 #define CONFIG_SPL_TEXT_BASE		0x70008000
 #define CONFIG_SPL_PAD_TO		0x8000
 #define CONFIG_SPL_STACK		0x70004000
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048

include/configs/ma5d4evk.h

@@ -216,8 +216,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/maxbcm.h

@@ -84,8 +84,6 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 /* SPL related SPI defines */
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT

include/configs/mcx.h

@@ -320,7 +320,6 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC

include/configs/microblaze-generic.h

@@ -285,7 +285,6 @@
 /* SPL part */
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 
 #define CONFIG_SPL_LDSCRIPT	"arch/microblaze/cpu/u-boot-spl.lds"

include/configs/mx31pdk.h

@@ -31,7 +31,6 @@
 #define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE	2048
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_TEXT_BASE	0x87dc0000
 #define CONFIG_SYS_TEXT_BASE	0x87e00000

include/configs/mxs.h

@@ -49,7 +49,6 @@
 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE
 #define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mxs"
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* Memory sizes */
 #define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */

include/configs/omap3_evm.h

@@ -346,7 +346,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 

include/configs/omapl138_lcdk.h

@@ -268,7 +268,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
 						CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_TEXT_BASE	0x80000000

include/configs/p1_p2_rdb_pc.h

@@ -181,7 +181,6 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
@@ -203,7 +202,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -231,7 +229,6 @@
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_TPL_SERIAL_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
@@ -242,7 +239,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE		0xff800000

include/configs/picosam9g45.h

@@ -163,7 +163,6 @@
 #define CONFIG_SPL_MAX_SIZE		0x010000
 #define CONFIG_SPL_STACK		0x310000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT
 
 #define CONFIG_SYS_MONITOR_LEN		0x80000

include/configs/rk3036_common.h

@@ -24,8 +24,6 @@
 #define CONFIG_SYS_TIMER_BASE		0x200440a0 /* TIMER5 */
 #define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMER_BASE + 8)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_MEM32
 

include/configs/rk3288_common.h

@@ -24,7 +24,6 @@
 #define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMER_BASE + 8)
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SYS_NS16550_MEM32
 #define CONFIG_SPL_BOARD_INIT
 

include/configs/sama5d2_ptc.h

@@ -121,8 +121,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/sama5d2_xplained.h

@@ -125,8 +125,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/sama5d3_xplained.h

@@ -124,8 +124,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/sama5d3xek.h

@@ -164,8 +164,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/sama5d4_xplained.h

@@ -124,8 +124,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/sama5d4ek.h

@@ -122,8 +122,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 

include/configs/sandbox_spl.h

@@ -11,6 +11,5 @@
 #define CONFIG_SPL_BOARD_INIT
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 #endif

include/configs/siemens-am33x-common.h

@@ -135,7 +135,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #define CONFIG_FS_FAT
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 
 #define CONFIG_SPL_WATCHDOG_SUPPORT

include/configs/sniper.h

@@ -137,8 +137,6 @@
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 #define CONFIG_SPL_BOARD_INIT
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION	2
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		1

include/configs/socfpga_common.h

@@ -323,7 +323,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SPL_MAX_SIZE		(64 * 1024)
 
 #define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #ifdef CONFIG_DM_SPI
 #define CONFIG_SPL_SPI_SUPPORT
 #endif

include/configs/sunxi-common.h

@@ -188,7 +188,6 @@
 #define CONFIG_FAT_WRITE	/* enable write access */
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 

include/configs/tam3517-common.h

@@ -201,7 +201,6 @@
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC

include/configs/tao3530.h

@@ -288,7 +288,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC

include/configs/taurus.h

@@ -258,8 +258,6 @@
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(3 * SZ_512)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
 #define CONFIG_SYS_USE_NANDFLASH	1

include/configs/tegra-common.h

@@ -122,8 +122,6 @@
 						CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00010000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 

include/configs/theadorable.h

@@ -149,8 +149,6 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 /* SPL related SPI defines */
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT

include/configs/ti814x_evm.h

@@ -167,7 +167,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000

include/configs/ti816x_evm.h

@@ -133,7 +133,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
 #define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000

include/configs/ti_armv7_common.h

@@ -263,7 +263,6 @@
 #define CONFIG_SYS_THUMB_BUILD
 
 /* General parts of the framework, required. */
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 
 #ifdef CONFIG_NAND

include/configs/tricorder.h

@@ -319,7 +319,6 @@
 #define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC

include/configs/uniphier.h

@@ -277,7 +277,6 @@
 #define CONFIG_PANIC_HANG
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 #ifdef CONFIG_ARM64
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 #endif

include/configs/woodburn_sd.h

@@ -22,7 +22,6 @@
  */
 #define CONFIG_SPL_FRAMEWORK
 #define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm1136/u-boot-spl.lds"
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x100 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400 /* 512 KB */

include/configs/work_92105.h

@@ -189,7 +189,6 @@
 /* Use the framework and generic lib */
 #define CONFIG_SPL_FRAMEWORK
 /* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
 /* SPL will load U-Boot from NAND offset 0x40000 */
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE

include/configs/x600.h

@@ -267,7 +267,6 @@
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /*
  * Please select/define only one of the following

include/configs/xilinx_zynqmp.h

@@ -260,7 +260,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x2000000
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_RAM_DEVICE
 

include/configs/zynq-common.h

@@ -293,7 +293,6 @@
 /* SPL part */
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_RAM_DEVICE