From de86fc3859f9c9ae26faed6f9d8fc115e1329b4f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 23 Aug 2017 10:12:22 +0200 Subject: [PATCH] sunxi: Remove the MMC index hack The current code, if there's both an eMMC and an MMC slot available on the board, will swap the MMC indices based on whether we booted from the eMMC or the MMC. This way, the MMC we're supposed to boot on will always have the index 0. However, this causes various issues, for example when using other components that base their behaviour on the MMC index, such as fastboot. Let's remove that hack, and take the opposite approach. The MMC will always have the same index, but the bootcmd will pick the same device than the one we booted from. This is done through the introduction of the mmc_bootdev environment variable that will be filled by the board code based on the boot device informations we can get from the SoC. In order to not introduce regressions, we also need to adjust the fastboot MMC device and the environment device in order to set it to the eMMC, over the MMC, like it used to be the case. Tested-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- board/sunxi/board.c | 20 +++++---------- cmd/fastboot/Kconfig | 2 ++ configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 - configs/Sinlinx_SinA33_defconfig | 1 - configs/parrot_r16_defconfig | 1 - include/configs/sunxi-common.h | 30 +++++++++++++++++----- 6 files changed, 32 insertions(+), 23 deletions(-) diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 7fdcc4a74f..cb42742dd2 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -492,20 +492,6 @@ int board_mmc_init(bd_t *bis) return -1; #endif -#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2 - /* - * On systems with an emmc (mmc2), figure out if we are booting from - * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc. - * are searched there first. Note we only do this for u-boot proper, - * not for the SPL, see spl_boot_device(). - */ - if (readb(SPL_ADDR + 0x28) == SUNXI_BOOTED_FROM_MMC2) { - /* Booting from emmc / mmc2, swap */ - mmc0->block_dev.devnum = 1; - mmc1->block_dev.devnum = 0; - } -#endif - return 0; } #endif @@ -725,12 +711,18 @@ int misc_init_r(void) env_set("fel_booted", NULL); env_set("fel_scriptaddr", NULL); + env_set("mmc_bootdev", NULL); boot = sunxi_get_boot_device(); /* determine if we are running in FEL mode */ if (boot == BOOT_DEVICE_BOARD) { env_set("fel_booted", "1"); parse_spl_header(SPL_ADDR); + /* or if we booted from MMC, and which one */ + } else if (boot == BOOT_DEVICE_MMC1) { + env_set("mmc_bootdev", "0"); + } else if (boot == BOOT_DEVICE_MMC2) { + env_set("mmc_bootdev", "1"); } setup_environment(gd->fdt_blob); diff --git a/cmd/fastboot/Kconfig b/cmd/fastboot/Kconfig index 7330da216a..214bbc23fc 100644 --- a/cmd/fastboot/Kconfig +++ b/cmd/fastboot/Kconfig @@ -74,6 +74,8 @@ config FASTBOOT_FLASH config FASTBOOT_FLASH_MMC_DEV int "Define FASTBOOT MMC FLASH default device" depends on FASTBOOT_FLASH && MMC + default 0 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1 + default 1 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1 help The fastboot "flash" command requires additional information regarding the non-volatile storage device. Define this to diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index a04037ebe7..b89c505efa 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -14,7 +14,6 @@ CONFIG_AHCI=y CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 # CONFIG_CMD_IMLS is not set CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index d726b404cc..32c887210d 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -15,7 +15,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 # CONFIG_CMD_IMLS is not set CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig index 6be57e604e..d6bc89c29e 100644 --- a/configs/parrot_r16_defconfig +++ b/configs/parrot_r16_defconfig @@ -13,7 +13,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-parrot" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 02d7be0849..91751171ec 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -148,7 +148,13 @@ #endif #if defined(CONFIG_ENV_IS_IN_MMC) -#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ +#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 +/* If we have two devices (most likely eMMC + MMC), favour the eMMC */ +#define CONFIG_SYS_MMC_ENV_DEV 1 +#else +/* Otherwise, use the only device we have */ +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif #define CONFIG_SYS_MMC_MAX_DEVICE 4 #elif defined(CONFIG_ENV_IS_NOWHERE) #define CONFIG_ENV_SIZE (128 << 10) @@ -382,15 +388,28 @@ extern int soft_i2c_gpio_scl; "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" #ifdef CONFIG_MMC -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 -#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1) +#define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ + BOOTENV_DEV_MMC(MMC, mmc, 0) \ + BOOTENV_DEV_MMC(MMC, mmc, 1) \ + "bootcmd_mmc_auto=" \ + "if test ${mmc_bootdev} -eq 1; then " \ + "run bootcmd_mmc1; " \ + "run bootcmd_mmc0; " \ + "elif test ${mmc_bootdev} -eq 0; then " \ + "run bootcmd_mmc0; " \ + "run bootcmd_mmc1; " \ + "fi\0" + +#define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ + "mmc_auto " + +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) #else -#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) #endif #else #define BOOT_TARGET_DEVICES_MMC(func) -#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) #endif #ifdef CONFIG_AHCI @@ -418,7 +437,6 @@ extern int soft_i2c_gpio_scl; #define BOOT_TARGET_DEVICES(func) \ func(FEL, fel, na) \ BOOT_TARGET_DEVICES_MMC(func) \ - BOOT_TARGET_DEVICES_MMC_EXTRA(func) \ BOOT_TARGET_DEVICES_SCSI(func) \ BOOT_TARGET_DEVICES_USB(func) \ func(PXE, pxe, na) \ -- GitLab