ARM: rmobile: Drop SDHI address macros from Gen3

Since the RCar Gen3 no longer uses the SH SDHI driver, but rather
uses the Matsushita SD driver, which loads all the properties from
device tree, these macros are no longer used, remove them.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

arch/arm/mach-rmobile/include/mach/r8a7795.h

@@ -26,11 +26,4 @@
 #define MSTP10_BITS	0xFFFEFFE0
 #define MSTP11_BITS	0x00000000
 
-/* SDHI */
-#define CONFIG_SYS_SH_SDHI0_BASE 0xEE100000
-#define CONFIG_SYS_SH_SDHI1_BASE 0xEE120000
-#define CONFIG_SYS_SH_SDHI2_BASE 0xEE140000	/* either MMC0 */
-#define CONFIG_SYS_SH_SDHI3_BASE 0xEE160000	/* either MMC1 */
-#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 4
-
 #endif /* __ASM_ARCH_R8A7795_H */

arch/arm/mach-rmobile/include/mach/r8a7796.h

@@ -26,11 +26,4 @@
 #define MSTP10_BITS	0xFFFEFFE0
 #define MSTP11_BITS	0x000000B7
 
-/* SDHI */
-#define CONFIG_SYS_SH_SDHI0_BASE 0xEE100000
-#define CONFIG_SYS_SH_SDHI1_BASE 0xEE120000
-#define CONFIG_SYS_SH_SDHI2_BASE 0xEE140000	/* either MMC0 */
-#define CONFIG_SYS_SH_SDHI3_BASE 0xEE160000	/* either MMC1 */
-#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 4
-
 #endif /* __ASM_ARCH_R8A7796_H */

arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h

@@ -68,12 +68,6 @@
 #define SMSTPCR10		0xE6150998
 #define SMSTPCR11		0xE615099C
 
-/* SDHI */
-#define CONFIG_SYS_SH_SDHI0_BASE	0xEE100000
-#define CONFIG_SYS_SH_SDHI1_BASE	0xEE120000
-#define CONFIG_SYS_SH_SDHI2_BASE	0xEE140000
-#define CONFIG_SYS_SH_SDHI3_BASE	0xEE160000
-
 /* PFC */
 #define PFC_PUEN5	0xE6060414
 #define PUEN_SSI_SDATA4	BIT(17)