diff --git a/board/technexion/pico-imx6ul/pico-imx6ul.c b/board/technexion/pico-imx6ul/pico-imx6ul.c
index fc746ec965e485fa26208264c5aa874717bae5be..b0b8f054c140e1ac3da0252dd4620acdedad46b8 100644
--- a/board/technexion/pico-imx6ul/pico-imx6ul.c
+++ b/board/technexion/pico-imx6ul/pico-imx6ul.c
@@ -142,6 +142,9 @@ static iomux_v3_cfg_t const usdhc1_pads[] = {
 	MX6_PAD_NAND_CLE__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 };
 
+#define USB_OTHERREGS_OFFSET	0x800
+#define UCTRL_PWR_POL		(1 << 9)
+
 static iomux_v3_cfg_t const usb_otg_pad[] = {
 	MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
 };
@@ -181,7 +184,26 @@ int board_early_init_f(void)
 
 int board_usb_phy_mode(int port)
 {
-	return USB_INIT_DEVICE;
+	if (port == 1)
+		return USB_INIT_HOST;
+	else
+		return USB_INIT_DEVICE;
+}
+
+int board_ehci_hcd_init(int port)
+{
+	u32 *usbnc_usb_ctrl;
+
+	if (port > 1)
+		return -EINVAL;
+
+	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
+				 port * 4);
+
+	/* Set Power polarity */
+	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
+
+	return 0;
 }
 
 int board_init(void)
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index f8fe2306aea37c5bc6258ebb78372481e73ad97f..f9fc263d991fa3b486c10e80677bfcd1200ac895 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -52,7 +52,7 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Only OTG1 port enabled */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 
 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS