From c620c01e96814558470698ed5cab1bf2f504d1b5 Mon Sep 17 00:00:00 2001 From: Graeme Russ Date: Sun, 7 Dec 2008 10:28:57 +1100 Subject: [PATCH] Added initial eNET board support Signed-off-by: Graeme Russ --- MAKEALL | 1 + Makefile | 3 + board/eNET/Makefile | 57 +++++++++ board/eNET/config.mk | 24 ++++ board/eNET/eNET.c | 167 +++++++++++++++++++++++++ board/eNET/eNET_start.S | 50 ++++++++ board/eNET/eNET_start16.S | 90 ++++++++++++++ board/eNET/hardware.h | 35 ++++++ board/eNET/u-boot.lds | 90 ++++++++++++++ include/configs/eNET.h | 249 ++++++++++++++++++++++++++++++++++++++ 10 files changed, 766 insertions(+) create mode 100644 board/eNET/Makefile create mode 100644 board/eNET/config.mk create mode 100644 board/eNET/eNET.c create mode 100644 board/eNET/eNET_start.S create mode 100644 board/eNET/eNET_start16.S create mode 100644 board/eNET/hardware.h create mode 100644 board/eNET/u-boot.lds create mode 100644 include/configs/eNET.h diff --git a/MAKEALL b/MAKEALL index 485fb884a7..0733dfc743 100755 --- a/MAKEALL +++ b/MAKEALL @@ -659,6 +659,7 @@ LIST_mips_el=" \ LIST_I486=" \ sc520_cdp \ + sc520_eNET \ sc520_spunk \ sc520_spunk_rel \ " diff --git a/Makefile b/Makefile index 685c8ae439..eeb913cb55 100644 --- a/Makefile +++ b/Makefile @@ -2996,6 +2996,9 @@ smdk6400_config : unconfig sc520_cdp_config : unconfig @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp +eNET_config : unconfig + @$(MKCONFIG) $(@:_config=) i386 i386 eNET + sc520_spunk_config : unconfig @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk diff --git a/board/eNET/Makefile b/board/eNET/Makefile new file mode 100644 index 0000000000..4813b4b53a --- /dev/null +++ b/board/eNET/Makefile @@ -0,0 +1,57 @@ +# +# (C) Copyright 2008 +# Graeme Russ, graeme.russ@gmail.com. +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2002 +# Daniel Engström, Omicron Ceti AB, daniel@omicron.se. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := eNET.o +SOBJS := eNET_start16.o eNET_start.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/eNET/config.mk b/board/eNET/config.mk new file mode 100644 index 0000000000..a76384130d --- /dev/null +++ b/board/eNET/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2002 +# Daniel Engström, Omicron Ceti AB, daniel@omicron.se. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x38040000 diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c new file mode 100644 index 0000000000..57dd6359e7 --- /dev/null +++ b/board/eNET/eNET.c @@ -0,0 +1,167 @@ +/* + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_HW_WATCHDOG +#include +#endif + +#include "hardware.h" + +DECLARE_GLOBAL_DATA_PTR; + +#undef SC520_CDP_DEBUG + +#ifdef SC520_CDP_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN; + +void init_sc520_enet (void) +{ + /* Set CPU Speed to 100MHz */ + write_mmcr_byte(SC520_CPUCTL, 1); + gd->cpu_clk = 100000000; + + /* wait at least one millisecond */ + asm("movl $0x2000,%%ecx\n" + "wait_loop: pushl %%ecx\n" + "popl %%ecx\n" + "loop wait_loop\n": : : "ecx"); + + /* turn on the SDRAM write buffer */ + write_mmcr_byte(SC520_DBCTL, 0x11); + + /* turn on the cache and disable write through */ + asm("movl %%cr0, %%eax\n" + "andl $0x9fffffff, %%eax\n" + "movl %%eax, %%cr0\n" : : : "eax"); +} + +/* + * Miscellaneous platform dependent initializations + */ +int board_init(void) +{ + init_sc520_enet(); + + write_mmcr_byte(SC520_GPCSRT, 0x01); /* GP Chip Select Recovery Time */ + write_mmcr_byte(SC520_GPCSPW, 0x07); /* GP Chip Select Pulse Width */ + write_mmcr_byte(SC520_GPCSOFF, 0x00); /* GP Chip Select Offset */ + write_mmcr_byte(SC520_GPRDW, 0x05); /* GP Read pulse width */ + write_mmcr_byte(SC520_GPRDOFF, 0x01); /* GP Read offset */ + write_mmcr_byte(SC520_GPWRW, 0x05); /* GP Write pulse width */ + write_mmcr_byte(SC520_GPWROFF, 0x01); /* GP Write offset */ + + write_mmcr_word(SC520_PIODATA15_0, 0x0630); /* PIO15_PIO0 Data */ + write_mmcr_word(SC520_PIODATA31_16, 0x2000); /* PIO31_PIO16 Data */ + write_mmcr_word(SC520_PIODIR31_16, 0x2000); /* GPIO Direction */ + write_mmcr_word(SC520_PIODIR15_0, 0x87b5); /* GPIO Direction */ + write_mmcr_word(SC520_PIOPFS31_16, 0x0dfe); /* GPIO pin function 31-16 reg */ + write_mmcr_word(SC520_PIOPFS15_0, 0x200a); /* GPIO pin function 15-0 reg */ + write_mmcr_byte(SC520_CSPFS, 0x00f8); /* Chip Select Pin Function Select */ + + write_mmcr_long(SC520_PAR2, 0x200713f8); /* Uart A (GPCS0, 0x013f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR3, 0x2c0712f8); /* Uart B (GPCS3, 0x012f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR4, 0x300711f8); /* Uart C (GPCS4, 0x011f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR5, 0x340710f8); /* Uart D (GPCS5, 0x010f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR6, 0xe3ffc000); /* SDRAM (0x00000000, 128MB) */ + write_mmcr_long(SC520_PAR7, 0xaa3fd000); /* StrataFlash (ROMCS1, 0x10000000, 16MB) */ + write_mmcr_long(SC520_PAR8, 0xca3fd100); /* StrataFlash (ROMCS2, 0x11000000, 16MB) */ + write_mmcr_long(SC520_PAR9, 0x4203d900); /* SRAM (GPCS0, 0x19000000, 1MB) */ + write_mmcr_long(SC520_PAR10, 0x4e03d910); /* SRAM (GPCS3, 0x19100000, 1MB) */ + write_mmcr_long(SC520_PAR11, 0x50018100); /* DP-RAM (GPCS4, 0x18100000, 4kB) */ + write_mmcr_long(SC520_PAR12, 0x54020000); /* CFLASH1 (0x200000000, 4kB) */ + write_mmcr_long(SC520_PAR13, 0x5c020001); /* CFLASH2 (0x200010000, 4kB) */ +/* write_mmcr_long(SC520_PAR14, 0x8bfff800); */ /* BOOTCS at 0x18000000 */ +/* write_mmcr_long(SC520_PAR15, 0x38201000); */ /* LEDs etc (GPCS6, 0x1000, 20 Bytes */ + + /* Disable Watchdog */ + write_mmcr_word(0x0cb0, 0x3333); + write_mmcr_word(0x0cb0, 0xcccc); + write_mmcr_word(0x0cb0, 0x0000); + + /* Chip Select Configuration */ + write_mmcr_word(SC520_BOOTCSCTL, 0x0033); + write_mmcr_word(SC520_ROMCS1CTL, 0x0615); + write_mmcr_word(SC520_ROMCS2CTL, 0x0615); + + write_mmcr_byte(SC520_ADDDECCTL, 0x02); + write_mmcr_byte(SC520_UART1CTL, 0x07); + write_mmcr_byte(SC520_SYSARBCTL,0x06); + write_mmcr_word(SC520_SYSARBMENB, 0x0003); + + /* Crystal is 33.000MHz */ + gd->bus_clk = 33000000; + + return 0; +} + +int dram_init(void) +{ + init_sc520_dram(); + return 0; +} + +void show_boot_progress(int val) +{ + uchar led_mask; + + led_mask = 0x00; + + if (val < 0) + led_mask |= LED_ERR_BITMASK; + + led_mask |= (uchar)(val & 0x001f); + outb(led_mask, LED_LATCH_ADDRESS); +} + + +int last_stage_init(void) +{ + int minor; + int major; + + major = minor = 0; + + printf("Serck Controls eNET\n"); + + return 0; +} + +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->interface = FLASH_CFI_X8; + return 1; + } else + return 0; +} diff --git a/board/eNET/eNET_start.S b/board/eNET/eNET_start.S new file mode 100644 index 0000000000..1b07d622f7 --- /dev/null +++ b/board/eNET/eNET_start.S @@ -0,0 +1,50 @@ +/* + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "hardware.h" + +/* board early intialization */ +.globl early_board_init +early_board_init: + /* No 32-bit board specific initialisation */ + jmp *%ebp /* return to caller */ + +.globl show_boot_progress_asm +show_boot_progress_asm: + + movb %al, %dl /* Create Working Copy */ + andb $0x80, %dl /* Mask in only Error bit */ + shrb $0x02, %dl /* Shift Error bit to Error LED */ + andb $0x0f, %al /* Mask out 'Error' bit */ + orb %dl, %al /* Mask in ERR LED */ + movw $LED_LATCH_ADDRESS, %dx + outb %al, %dx + jmp *%ebp /* return to caller */ + +.globl cpu_halt_asm +cpu_halt_asm: + movb $0x0f, %al + movw $LED_LATCH_ADDRESS, %dx + outb %al, %dx + hlt + jmp cpu_halt_asm diff --git a/board/eNET/eNET_start16.S b/board/eNET/eNET_start16.S new file mode 100644 index 0000000000..48e4d83a13 --- /dev/null +++ b/board/eNET/eNET_start16.S @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * 16bit initialization code. + * This code have to map the area of the boot flash + * that is used by U-boot to its final destination. + */ + +/* #include */ + +#include "hardware.h" + +.text +.section .start16, "ax" +.code16 +.globl board_init16 +board_init16: + /* Alias MMCR to 0xdf000 */ + movw $0xfffc, %dx + movl $0x800df0cb, %eax + outl %eax, %dx + + /* Set ds to point to MMCR alias */ + movw $0xdf00, %ax + movw %ax, %ds + + /* Map PAR for Boot Flash (BOOTCS, 512kB @ 0x380000000) */ + movl $0x00c0, %edi /* SC520_PAR14 */ + movl $0x8bfff800, %eax /* TODO: Check this */ + movl %eax, (%di) + + /* Map PAR for LED, Hex Switches (GPCS6, 20 Bytes @ 0x1000) */ + movl $0x00c4, %edi /* SC520_PAR15 */ + movl $0x38201000, %eax + movl %eax, (%di) + + /* Disable SDRAM write buffer */ + movw $0x0040, %di /* SC520_DBCTL */ + xorw %ax, %ax + movb %al, (%di) + + /* Disabe MMCR alias */ + movw $0xfffc, %dx + movl $0x000000cb, %eax + outl %eax, %dx + + /* the return address is stored in bp */ + jmp *%bp + +.section .bios, "ax" +.code16 +.globl realmode_reset +realmode_reset: + /* Alias MMCR to 0xdf000 */ + movw $0xfffc, %dx + movl $0x800df0cb, %eax + outl %eax, %dx + + /* Set ds to point to MMCR alias */ + movw $0xdf00, %ax + movw %ax, %ds + + /* issue software reset thorugh MMCR */ + movl $0xd72, %edi + movb $0x01, %al + movb %al, (%di) + +1: hlt + jmp 1 diff --git a/board/eNET/hardware.h b/board/eNET/hardware.h new file mode 100644 index 0000000000..42474a62fa --- /dev/null +++ b/board/eNET/hardware.h @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef HARDWARE_H_ +#define HARDWARE_H_ + +#define LED_LATCH_ADDRESS 0x1002 +#define LED_RUN_BITMASK 0x01 +#define LED_1_BITMASK 0x02 +#define LED_2_BITMASK 0x04 +#define LED_RX_BITMASK 0x08 +#define LED_TX_BITMASK 0x10 +#define LED_ERR_BITMASK 0x20 + +#endif /* HARDWARE_H_ */ diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds new file mode 100644 index 0000000000..f3d28ef945 --- /dev/null +++ b/board/eNET/u-boot.lds @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) +ENTRY(_start) + +SECTIONS +{ + . = 0x38040000; /* Location of bootcode in flash */ + .text : { *(.text); } + + . = ALIGN(4); + .rodata : { *(.rodata) *(.rodata.str1.1) *(.rodata.str1.32) } + + _i386boot_text_size = SIZEOF(.text) + SIZEOF(.rodata); + + . = 0x03FF0000; /* Ram data segment to use */ + _i386boot_romdata_dest = ABSOLUTE(.); + .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) } + _i386boot_romdata_start = LOADADDR(.data); + + . = ALIGN(4); + .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) } + + . = ALIGN(4); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + _i386boot_cmd_start = LOADADDR(.u_boot_cmd); + + _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got) + SIZEOF(.u_boot_cmd); + + . = ALIGN(4); + _i386boot_bss_start = ABSOLUTE(.); + .bss (NOLOAD) : { *(.bss) } + _i386boot_bss_size = SIZEOF(.bss); + + /* 16bit realmode trampoline code */ + .realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) + SIZEOF(.u_boot_cmd)) { *(.realmode) } + + _i386boot_realmode = LOADADDR(.realmode); + _i386boot_realmode_size = SIZEOF(.realmode); + + /* 16bit BIOS emulation code (just enough to boot Linux) */ + .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) } + + _i386boot_bios = LOADADDR(.bios); + _i386boot_bios_size = SIZEOF(.bios); + + /* The load addresses below assumes that the flash + * will be mapped so that 0x387f0000 == 0xffff0000 + * at reset time + * + * The fe00 and ff00 offsets of the start32 and start16 + * segments are arbitrary, the just have to be mapped + * at reset and the code have to fit. + * The fff0 offset of reset is important, however. + */ + + . = 0xfffffe00; + .start32 : AT (0x3807fe00) { *(.start32); } + + . = 0xf800; + .start16 : AT (0x3807f800) { *(.start16); } + + . = 0xfff0; + .reset : AT (0x3807fff0) { *(.reset); } + _i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) ); +} diff --git a/include/configs/eNET.h b/include/configs/eNET.h new file mode 100644 index 0000000000..87d2908a3b --- /dev/null +++ b/include/configs/eNET.h @@ -0,0 +1,249 @@ +/* + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Stuff still to be dealt with - + */ +#define CONFIG_RTC_MC146818 + +/* + * High Level Configuration Options + * (easy to change) + */ +#define DEBUG_PARSER + +#define CONFIG_X86 1 /* Intel X86 CPU */ +#define CONFIG_SC520 1 /* AMD SC520 */ +#define CONFIG_SC520_SSI +#define CONFIG_SHOW_BOOT_PROGRESS 1 +#define CONFIG_LAST_STAGE_INIT 1 + +/* + * If CONFIG_HW_WATCHDOG is not defined, the watchdog jumper on the + * bottom (processor) board MUST be removed! + */ +#undef CONFIG_WATCHDOG +#undef CONFIG_HW_WATCHDOG + + /*----------------------------------------------------------------------- + * Video Configuration + */ +#undef CONFIG_VIDEO /* No Video Hardware */ +#undef CONFIG_CFB_CONSOLE + +/* + * Size of malloc() pool + */ +#define CONFIG_MALLOC_SIZE (CONFIG_SYS_ENV_SIZE + 128*1024) + +#define CONFIG_BAUDRATE 9600 + +/*----------------------------------------------------------------------- + * Command line configuration. + */ +#include + +#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_BOOTD /* bootd */ +#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_ECHO /* echo arguments */ +#define CONFIG_CMD_ENV /* saveenv */ +#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_IMI /* iminfo */ +#define CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ +#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_XIMG /* Load part of Multi Image */ +#undef CONFIG_CMD_IRQ /* IRQ Information */ + +#define CONFIG_BOOTDELAY 15 +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" +/* #define CONFIG_BOOTCOMMAND "bootm 38000000" */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + \ + 16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */ + + /* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * SDRAM Configuration + */ +#define CONFIG_SYS_SDRAM_DRCTMCTL 0x18 +#define CONFIG_NR_DRAM_BANKS 4 + +/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/ +#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY +#undef CONFIG_SYS_SDRAM_REFRESH_RATE +#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY +#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T +#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T + +/*----------------------------------------------------------------------- + * CPU Features + */ +#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ +#define CONFIG_SYS_RESET_GENERIC /* use triple-fault to reset cpu */ +#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */ +#define CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */ +#undef CONFIG_SYS_TIMER_GENERIC /* use the i8254 PIT timers */ +#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */ +#define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those + * in the SC520 on the CDP */ + +/*----------------------------------------------------------------------- + * Memory organization + */ +#define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */ +#define CONFIG_SYS_BL_START_FLASH 0x38040000 /* Address of relocated code */ +#define CONFIG_SYS_BL_START_RAM 0x03fd0000 /* Address of relocated code */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_FLASH_BASE 0x38000000 /* Boot Flash */ +#define CONFIG_SYS_FLASH_BASE_1 0x10000000 /* StrataFlash 1 */ +#define CONFIG_SYS_FLASH_BASE_2 0x11000000 /* StrataFlash 2 */ + +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + + /*----------------------------------------------------------------------- + * FLASH configuration + */ +#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */ +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */ +#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_FLASH_BASE_1, \ + CONFIG_SYS_FLASH_BASE_2} +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CONFIG_SYS_FLASH_LEGACY_512Kx8 + + /*----------------------------------------------------------------------- + * Environment configuration + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x20000 /* Offset of Environment Sector */ +#define CONFIG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE_1 + \ + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + + + /*----------------------------------------------------------------------- + * PCI configuration + */ +#undef CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* pci plug-and-play */ +#undef CONFIG_PCI_SCAN_SHOW +#undef CONFIG_SYS_FIRST_PCI_IRQ +#undef CONFIG_SYS_SECOND_PCI_IRQ +#undef CONFIG_SYS_THIRD_PCI_IRQ +#undef CONFIG_SYS_FORTH_PCI_IRQ + +/*----------------------------------------------------------------------- + * Hardware watchdog configuration + */ +#define CONFIG_SYS_WATCHDOG_PIO_BIT 0x8000 +#define CONFIG_SYS_WATCHDIG_PIO_DATA SC520_PIODATA15_0 +#define CONFIG_SYS_WATCHDIG_PIO_CLR SC520_PIOCLR15_0 +#define CONFIG_SYS_WATCHDIG_PIO_SET SC520_PIOSET15_0 + +/*----------------------------------------------------------------------- + * FPGA configuration + */ +#define CONFIG_SYS_FPGA_PROGRAM_PIO_BIT 0x2000 +#define CONFIG_SYS_FPGA_INIT_PIO_BIT 0x4000 +#define CONFIG_SYS_FPGA_DONE_PIO_BIT 0x8000 +#define CONFIG_SYS_FPGA_PIO_DATA SC520_PIODATA31_16 +#define CONFIG_SYS_FPGA_PIO_DIRECTION SC520_PIODIR31_16 +#define CONFIG_SYS_FPGA_PIO_CLR SC520_PIOCLR31_16 +#define CONFIG_SYS_FPGA_PIO_SET SC520_PIOSET31_16 +#define CONFIG_SYS_FPGA_PROGRAM_BIT_DROP_TIME 1 /* milliseconds */ +#define CONFIG_SYS_FPGA_MAX_INIT_TIME 10 /* milliseconds */ +#define CONFIG_SYS_FPGA_MAX_FINALISE_TIME 10 /* milliseconds */ +#define CONFIG_SYS_FPGA_SSI_DATA_RATE 8333 /* kHz (33.3333MHz xtal) */ + +#ifndef __ASSEMBLER__ +extern unsigned long ip; + +#define PRINTIP asm ("call next_line\n" \ + "next_line:\n" \ + "pop %%eax\n" \ + "movl %%eax, %0\n" \ + :"=r"(ip) \ + : /* No Input Registers */ \ + :"%eax"); \ + printf("IP: 0x%08lx (File: %s, Line: %d)\n", ip, __FILE__, __LINE__); + +#endif +#endif /* __CONFIG_H */ -- GitLab