Merge branch 'master' of git://git.denx.de/u-boot-arm

Makefile

@@ -915,6 +915,16 @@ OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
 u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
 	$(call if_changed,pad_cat)
 
+MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
+	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
+spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+			  --gap-fill=0
+u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
+	$(call if_changed,pad_cat)
+
 ifneq ($(CONFIG_TEGRA),)
 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
 u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE

README

@@ -3275,6 +3275,10 @@ FIT uImage format:
 		supports MMC, NAND and YMODEM loading of U-Boot and NAND
 		NAND loading of the Linux Kernel.
 
+		CONFIG_SPL_OS_BOOT
+		Enable booting directly to an OS from SPL.
+		See also: doc/README.falcon
+
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
@@ -3350,6 +3354,10 @@ FIT uImage format:
 		Support for NAND boot using simple NAND drivers that
 		expose the cmd_ctrl() interface.
 
+		CONFIG_SPL_MTD_SUPPORT
+		Support for the MTD subsystem within SPL.  Useful for
+		environment on NAND support within SPL.
+
 		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 		Set for the SPL on PPC mpc8xxx targets, support for
 		drivers/ddr/fsl/libddr.o in SPL binary.
@@ -4512,6 +4520,11 @@ Low Level (hardware related) configuration options:
 - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
 		Enables the RTC32K OSC on AM33xx based plattforms
 
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+		Option to disable subpage write in NAND driver
+		driver that uses this:
+		drivers/mtd/nand/davinci_nand.c
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 

arch/arm/cpu/arm720t/tegra-common/spl.c

@@ -13,16 +13,18 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
+#include <asm/arch-tegra/apb_misc.h>
 #include <asm/arch-tegra/board.h>
 #include <asm/arch/spl.h>
 #include "cpu.h"
 
 void spl_board_init(void)
 {
-	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	struct apb_misc_pp_ctlr *apb_misc =
+				(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
 
 	/* enable JTAG */
-	writel(0xC0, &pmt->pmt_cfg_ctl);
+	writel(0xC0, &apb_misc->cfg_ctl);
 
 	board_init_uart_f();
 

arch/arm/cpu/arm720t/tegra114/cpu.c

@@ -34,8 +34,8 @@ static void enable_cpu_power_rail(void)
 	debug("enable_cpu_power_rail entry\n");
 
 	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
-	pinmux_tristate_disable(PINGRP_PWR_I2C_SCL);
-	pinmux_tristate_disable(PINGRP_PWR_I2C_SDA);
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
 
 	/*
 	 * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),

arch/arm/cpu/arm720t/tegra124/cpu.c

@@ -26,8 +26,8 @@ static void enable_cpu_power_rail(void)
 	debug("enable_cpu_power_rail entry\n");
 
 	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
-	pinmux_tristate_disable(PINGRP_PWR_I2C_SCL);
-	pinmux_tristate_disable(PINGRP_PWR_I2C_SDA);
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
 
 	pmic_enable_cpu_vdd();
 

arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c

@@ -26,7 +26,7 @@ void davinci_enable_uart0(void)
 }
 
 #if defined(CONFIG_SYS_DA850_PLL_INIT)
-void da850_waitloop(unsigned long loopcnt)
+static void da850_waitloop(unsigned long loopcnt)
 {
 	unsigned long	i;
 
@@ -34,7 +34,7 @@ void da850_waitloop(unsigned long loopcnt)
 		asm("   NOP");
 }
 
-int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
+static int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
 {
 	if (reg == davinci_pllc0_regs)
 		/* Unlock PLL registers. */
@@ -160,7 +160,7 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
 #endif /* CONFIG_SYS_DA850_PLL_INIT */
 
 #if defined(CONFIG_SYS_DA850_DDR_INIT)
-int da850_ddr_setup(void)
+static int da850_ddr_setup(void)
 {
 	unsigned long	tmp;
 

arch/arm/cpu/arm926ejs/davinci/dm355.c

@@ -19,7 +19,7 @@ void davinci_enable_uart0(void)
 }
 
 
-#ifdef CONFIG_DRIVER_DAVINCI_I2C
+#ifdef CONFIG_SYS_I2C_DAVINCI
 void davinci_enable_i2c(void)
 {
 	lpsc_on(DAVINCI_LPSC_I2C);

arch/arm/cpu/arm926ejs/davinci/dm365.c

@@ -12,7 +12,7 @@ void davinci_enable_uart0(void)
 	lpsc_on(DAVINCI_LPSC_UART0);
 }
 
-#ifdef CONFIG_DRIVER_DAVINCI_I2C
+#ifdef CONFIG_SYS_I2C_DAVINCI
 void davinci_enable_i2c(void)
 {
 	lpsc_on(DAVINCI_LPSC_I2C);

arch/arm/cpu/arm926ejs/davinci/dm644x.c

@@ -47,7 +47,7 @@ void davinci_enable_emac(void)
 }
 #endif
 
-#ifdef CONFIG_DRIVER_DAVINCI_I2C
+#ifdef CONFIG_SYS_I2C_DAVINCI
 void davinci_enable_i2c(void)
 {
 	lpsc_on(DAVINCI_LPSC_I2C);

arch/arm/cpu/arm926ejs/davinci/dm646x.c

@@ -18,7 +18,7 @@ void davinci_enable_emac(void)
 }
 #endif
 
-#ifdef CONFIG_DRIVER_DAVINCI_I2C
+#ifdef CONFIG_SYS_I2C_DAVINCI
 void davinci_enable_i2c(void)
 {
 	lpsc_on(DAVINCI_DM646X_LPSC_I2C);

arch/arm/cpu/armv7/Makefile

@@ -25,6 +25,7 @@ endif
 
 obj-$(CONFIG_KONA) += kona-common/
 obj-$(CONFIG_OMAP_COMMON) += omap-common/
+obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
 obj-$(CONFIG_TEGRA) += tegra-common/
 
 ifneq (,$(filter s5pc1xx exynos,$(SOC)))

arch/arm/cpu/armv7/am33xx/board.c

@@ -142,7 +142,7 @@ int arch_misc_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
 /*
  * This function is the place to do per-board things such as ramp up the
  * MPU clock frequency.
@@ -200,9 +200,7 @@ static void watchdog_disable(void)
 	while (readl(&wdtimer->wdtwwps) != 0x0)
 		;
 }
-#endif
 
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 void s_init(void)
 {
 	/*

arch/arm/cpu/armv7/am33xx/emif4.c

@@ -35,7 +35,7 @@ void dram_init_banksize(void)
 }
 
 
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #ifdef CONFIG_TI81XX
 static struct dmm_lisa_map_regs *hw_lisa_map_regs =
 				(struct dmm_lisa_map_regs *)DMM_BASE;

arch/arm/cpu/armv7/arch_timer.c

+/*
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <div64.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int timer_init(void)
+{
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
+
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	ulong nowl, nowu;
+
+	asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (nowl), "=r" (nowu));
+
+	gd->arch.tbl = nowl;
+	gd->arch.tbu = nowu;
+
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+
+ulong get_timer(ulong base)
+{
+	return lldiv(get_ticks(), gd->arch.timer_rate_hz) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned long long endtime;
+
+	endtime = lldiv((unsigned long long)usec * gd->arch.timer_rate_hz,
+			1000UL);
+
+	endtime += get_ticks();
+
+	while (get_ticks() < endtime)
+		;
+}
+
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}

arch/arm/cpu/armv7/keystone/Makefile

+#
+# (C) Copyright 2012-2014
+#     Texas Instruments Incorporated, <www.ti.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= aemif.o
+obj-y	+= init.o
+obj-y	+= psc.o
+obj-y	+= clock.o
+obj-y	+= cmd_clock.o
+obj-y	+= cmd_mon.o
+obj-y	+= keystone_nav.o
+obj-y	+= msmc.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
+obj-y	+= ddr3.o

arch/arm/cpu/armv7/keystone/aemif.c

+/*
+ * Keystone2: Asynchronous EMIF Configuration
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/emif_defs.h>
+
+#define AEMIF_CFG_SELECT_STROBE(v)	((v) ? 1 << 31 : 0)
+#define AEMIF_CFG_EXTEND_WAIT(v)	((v) ? 1 << 30 : 0)
+#define AEMIF_CFG_WR_SETUP(v)		(((v) & 0x0f) << 26)
+#define AEMIF_CFG_WR_STROBE(v)		(((v) & 0x3f) << 20)
+#define AEMIF_CFG_WR_HOLD(v)		(((v) & 0x07) << 17)
+#define AEMIF_CFG_RD_SETUP(v)		(((v) & 0x0f) << 13)
+#define AEMIF_CFG_RD_STROBE(v)		(((v) & 0x3f) << 7)
+#define AEMIF_CFG_RD_HOLD(v)		(((v) & 0x07) << 4)
+#define AEMIF_CFG_TURN_AROUND(v)	(((v) & 0x03) << 2)
+#define AEMIF_CFG_WIDTH(v)		(((v) & 0x03) << 0)
+
+#define set_config_field(reg, field, val)			\
+	do {							\
+		if (val != -1) {				\
+			reg &= ~AEMIF_CFG_##field(0xffffffff);	\
+			reg |=	AEMIF_CFG_##field(val);		\
+		}						\
+	} while (0)
+
+void configure_async_emif(int cs, struct async_emif_config *cfg)
+{
+	unsigned long tmp;
+
+	if (cfg->mode == ASYNC_EMIF_MODE_NAND) {
+		tmp = __raw_readl(&davinci_emif_regs->nandfcr);
+		tmp |= (1 << cs);
+		__raw_writel(tmp, &davinci_emif_regs->nandfcr);
+
+	} else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) {
+		tmp = __raw_readl(&davinci_emif_regs->one_nand_cr);
+		tmp |= (1 << cs);
+		__raw_writel(tmp, &davinci_emif_regs->one_nand_cr);
+	}
+
+	tmp = __raw_readl(&davinci_emif_regs->abncr[cs]);
+
+	set_config_field(tmp, SELECT_STROBE,	cfg->select_strobe);
+	set_config_field(tmp, EXTEND_WAIT,	cfg->extend_wait);
+	set_config_field(tmp, WR_SETUP,		cfg->wr_setup);
+	set_config_field(tmp, WR_STROBE,	cfg->wr_strobe);
+	set_config_field(tmp, WR_HOLD,		cfg->wr_hold);
+	set_config_field(tmp, RD_SETUP,		cfg->rd_setup);
+	set_config_field(tmp, RD_STROBE,	cfg->rd_strobe);
+	set_config_field(tmp, RD_HOLD,		cfg->rd_hold);
+	set_config_field(tmp, TURN_AROUND,	cfg->turn_around);
+	set_config_field(tmp, WIDTH,		cfg->width);
+
+	__raw_writel(tmp, &davinci_emif_regs->abncr[cs]);
+}
+
+void init_async_emif(int num_cs, struct async_emif_config *config)
+{
+	int cs;
+
+	for (cs = 0; cs < num_cs; cs++)
+		configure_async_emif(cs, config + cs);
+}

arch/arm/cpu/armv7/keystone/clock.c

+/*
+ * Keystone2: pll initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm-generic/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clock_defs.h>
+
+static void wait_for_completion(const struct pll_init_data *data)
+{
+	int i;
+	for (i = 0; i < 100; i++) {
+		sdelay(450);
+		if ((pllctl_reg_read(data->pll, stat) & PLLSTAT_GO) == 0)
+			break;
+	}
+}
+
+struct pll_regs {
+	u32	reg0, reg1;
+};
+
+static const struct pll_regs pll_regs[] = {
+	[CORE_PLL]	= { K2HK_MAINPLLCTL0, K2HK_MAINPLLCTL1},
+	[PASS_PLL]	= { K2HK_PASSPLLCTL0, K2HK_PASSPLLCTL1},
+	[TETRIS_PLL]	= { K2HK_ARMPLLCTL0,  K2HK_ARMPLLCTL1},
+	[DDR3A_PLL]	= { K2HK_DDR3APLLCTL0, K2HK_DDR3APLLCTL1},
+	[DDR3B_PLL]	= { K2HK_DDR3BPLLCTL0, K2HK_DDR3BPLLCTL1},
+};
+
+/* Fout = Fref * NF(mult) / NR(prediv) / OD */
+static unsigned long pll_freq_get(int pll)
+{
+	unsigned long mult = 1, prediv = 1, output_div = 2;
+	unsigned long ret;
+	u32 tmp, reg;
+
+	if (pll == CORE_PLL) {
+		ret = external_clk[sys_clk];
+		if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) {
+			/* PLL mode */
+			tmp = __raw_readl(K2HK_MAINPLLCTL0);
+			prediv = (tmp & PLL_DIV_MASK) + 1;
+			mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) |
+				(pllctl_reg_read(pll, mult) &
+				 PLLM_MULT_LO_MASK)) + 1;
+			output_div = ((pllctl_reg_read(pll, secctl) >>
+				       PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1;
+
+			ret = ret / prediv / output_div * mult;
+		}
+	} else {
+		switch (pll) {
+		case PASS_PLL:
+			ret = external_clk[pa_clk];
+			reg = K2HK_PASSPLLCTL0;
+			break;
+		case TETRIS_PLL:
+			ret = external_clk[tetris_clk];
+			reg = K2HK_ARMPLLCTL0;
+			break;
+		case DDR3A_PLL:
+			ret = external_clk[ddr3a_clk];
+			reg = K2HK_DDR3APLLCTL0;
+			break;
+		case DDR3B_PLL:
+			ret = external_clk[ddr3b_clk];
+			reg = K2HK_DDR3BPLLCTL0;
+			break;
+		default:
+			return 0;
+		}
+
+		tmp = __raw_readl(reg);
+
+		if (!(tmp & PLLCTL_BYPASS)) {
+			/* Bypass disabled */
+			prediv = (tmp & PLL_DIV_MASK) + 1;
+			mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1;
+			output_div = ((tmp >> PLL_CLKOD_SHIFT) &
+				      PLL_CLKOD_MASK) + 1;
+			ret = ((ret / prediv) * mult) / output_div;
+		}
+	}
+
+	return ret;
+}
+
+unsigned long clk_get_rate(unsigned int clk)
+{
+	switch (clk) {
+	case core_pll_clk:	return pll_freq_get(CORE_PLL);
+	case pass_pll_clk:	return pll_freq_get(PASS_PLL);
+	case tetris_pll_clk:	return pll_freq_get(TETRIS_PLL);
+	case ddr3a_pll_clk:	return pll_freq_get(DDR3A_PLL);
+	case ddr3b_pll_clk:	return pll_freq_get(DDR3B_PLL);
+	case sys_clk0_1_clk:
+	case sys_clk0_clk:	return pll_freq_get(CORE_PLL) / pll0div_read(1);
+	case sys_clk1_clk:	return pll_freq_get(CORE_PLL) / pll0div_read(2);
+	case sys_clk2_clk:	return pll_freq_get(CORE_PLL) / pll0div_read(3);
+	case sys_clk3_clk:	return pll_freq_get(CORE_PLL) / pll0div_read(4);
+	case sys_clk0_2_clk:	return clk_get_rate(sys_clk0_clk) / 2;
+	case sys_clk0_3_clk:	return clk_get_rate(sys_clk0_clk) / 3;
+	case sys_clk0_4_clk:	return clk_get_rate(sys_clk0_clk) / 4;
+	case sys_clk0_6_clk:	return clk_get_rate(sys_clk0_clk) / 6;
+	case sys_clk0_8_clk:	return clk_get_rate(sys_clk0_clk) / 8;
+	case sys_clk0_12_clk:	return clk_get_rate(sys_clk0_clk) / 12;
+	case sys_clk0_24_clk:	return clk_get_rate(sys_clk0_clk) / 24;
+	case sys_clk1_3_clk:	return clk_get_rate(sys_clk1_clk) / 3;
+	case sys_clk1_4_clk:	return clk_get_rate(sys_clk1_clk) / 4;
+	case sys_clk1_6_clk:	return clk_get_rate(sys_clk1_clk) / 6;
+	case sys_clk1_12_clk:	return clk_get_rate(sys_clk1_clk) / 12;
+	default:
+		break;
+	}
+	return 0;
+}
+
+void init_pll(const struct pll_init_data *data)
+{
+	u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj;
+
+	pllm = data->pll_m - 1;
+	plld = (data->pll_d - 1) & PLL_DIV_MASK;
+	pllod = (data->pll_od - 1) & PLL_CLKOD_MASK;
+
+	if (data->pll == MAIN_PLL) {
+		/* The requered delay before main PLL configuration */
+		sdelay(210000);
+
+		tmp = pllctl_reg_read(data->pll, secctl);
+
+		if (tmp & (PLLCTL_BYPASS)) {
+			setbits_le32(pll_regs[data->pll].reg1,
+				     BIT(MAIN_ENSAT_OFFSET));
+
+			pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
+					   PLLCTL_PLLENSRC);
+			sdelay(340);
+
+			pllctl_reg_setbits(data->pll, secctl, PLLCTL_BYPASS);
+			pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN);
+			sdelay(21000);
+
+			pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN);
+		} else {
+			pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
+					   PLLCTL_PLLENSRC);
+			sdelay(340);
+		}
+
+		pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
+
+		clrsetbits_le32(pll_regs[data->pll].reg0, PLLM_MULT_HI_SMASK,
+				(pllm << 6));
+
+		/* Set the BWADJ     (12 bit field)  */
+		tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */
+		clrsetbits_le32(pll_regs[data->pll].reg0, PLL_BWADJ_LO_SMASK,
+				(tmp_ctl << PLL_BWADJ_LO_SHIFT));
+		clrsetbits_le32(pll_regs[data->pll].reg1, PLL_BWADJ_HI_MASK,
+				(tmp_ctl >> 8));
+
+		/*
+		 * Set the pll divider (6 bit field) *
+		 * PLLD[5:0] is located in MAINPLLCTL0
+		 */
+		clrsetbits_le32(pll_regs[data->pll].reg0, PLL_DIV_MASK, plld);
+
+		/* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */
+		pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK,
+			       (pllod << PLL_CLKOD_SHIFT));
+		wait_for_completion(data);
+
+		pllctl_reg_write(data->pll, div1, PLLM_RATIO_DIV1);
+		pllctl_reg_write(data->pll, div2, PLLM_RATIO_DIV2);
+		pllctl_reg_write(data->pll, div3, PLLM_RATIO_DIV3);
+		pllctl_reg_write(data->pll, div4, PLLM_RATIO_DIV4);
+		pllctl_reg_write(data->pll, div5, PLLM_RATIO_DIV5);
+
+		pllctl_reg_setbits(data->pll, alnctl, 0x1f);
+
+		/*
+		 * Set GOSET bit in PLLCMD to initiate the GO operation
+		 * to change the divide
+		 */
+		pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GO);
+		sdelay(1500); /* wait for the phase adj */
+		wait_for_completion(data);
+
+		/* Reset PLL */
+		pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST);
+		sdelay(21000);	/* Wait for a minimum of 7 us*/
+		pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST);
+		sdelay(105000);	/* Wait for PLL Lock time (min 50 us) */
+
+		pllctl_reg_clrbits(data->pll, secctl, PLLCTL_BYPASS);
+
+		tmp = pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN);
+
+	} else if (data->pll == TETRIS_PLL) {
+		bwadj = pllm >> 1;
+		/* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */
+		setbits_le32(pll_regs[data->pll].reg0,  PLLCTL_BYPASS);
+		/*
+		 * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass)
+		 * only applicable for Kepler
+		 */
+		clrbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+		/* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */
+		setbits_le32(pll_regs[data->pll].reg1 ,
+			     PLL_PLLRST | PLLCTL_ENSAT);
+
+		/*
+		 * 3 Program PLLM and PLLD in PLLCTL0 register
+		 * 4 Program BWADJ[7:0] in PLLCTL0 and BWADJ[11:8] in
+		 * PLLCTL1 register. BWADJ value must be set
+		 * to ((PLLM + 1) >> 1) – 1)
+		 */
+		tmp = ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) |
+			(pllm << 6) |
+			(plld & PLL_DIV_MASK) |
+			(pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS;
+		__raw_writel(tmp, pll_regs[data->pll].reg0);
+
+		/* Set BWADJ[11:8] bits */
+		tmp = __raw_readl(pll_regs[data->pll].reg1);
+		tmp &= ~(PLL_BWADJ_HI_MASK);
+		tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK);
+		__raw_writel(tmp, pll_regs[data->pll].reg1);
+		/*
+		 * 5 Wait for at least 5 us based on the reference
+		 * clock (PLL reset time)
+		 */
+		sdelay(21000);	/* Wait for a minimum of 7 us*/
+
+		/* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */
+		clrbits_le32(pll_regs[data->pll].reg1, PLL_PLLRST);
+		/*
+		 * 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1)
+		 * (PLL lock time)
+		 */
+		sdelay(105000);
+		/* 8 disable bypass */
+		clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+		/*
+		 * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass)
+		 * only applicable for Kepler
+		 */
+		setbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+	} else {
+		setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT);
+		/*
+		 * process keeps state of Bypass bit while programming
+		 * all other DDR PLL settings
+		 */
+		tmp = __raw_readl(pll_regs[data->pll].reg0);
+		tmp &= PLLCTL_BYPASS;	/* clear everything except Bypass */
+
+		/*
+		 * Set the BWADJ[7:0], PLLD[5:0] and PLLM to PLLCTL0,
+		 * bypass disabled
+		 */
+		bwadj = pllm >> 1;
+		tmp |= ((bwadj & PLL_BWADJ_LO_SHIFT) << PLL_BWADJ_LO_SHIFT) |
+			(pllm << PLL_MULT_SHIFT) |
+			(plld & PLL_DIV_MASK) |
+			(pllod << PLL_CLKOD_SHIFT);
+		__raw_writel(tmp, pll_regs[data->pll].reg0);
+
+		/* Set BWADJ[11:8] bits */
+		tmp = __raw_readl(pll_regs[data->pll].reg1);
+		tmp &= ~(PLL_BWADJ_HI_MASK);
+		tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK);
+
+		/* set PLL Select (bit 13) for PASS PLL */
+		if (data->pll == PASS_PLL)
+			tmp |= PLLCTL_PAPLL;
+
+		__raw_writel(tmp, pll_regs[data->pll].reg1);
+
+		/* Reset bit: bit 14 for both DDR3 & PASS PLL */
+		tmp = PLL_PLLRST;
+		/* Set RESET bit = 1 */
+		setbits_le32(pll_regs[data->pll].reg1, tmp);
+		/* Wait for a minimum of 7 us*/
+		sdelay(21000);
+		/* Clear RESET bit */
+		clrbits_le32(pll_regs[data->pll].reg1, tmp);
+		sdelay(105000);
+
+		/* clear BYPASS (Enable PLL Mode) */
+		clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+		sdelay(21000);	/* Wait for a minimum of 7 us*/
+	}
+
+	/*
+	 * This is required to provide a delay between multiple
+	 * consequent PPL configurations
+	 */
+	sdelay(210000);
+}
+
+void init_plls(int num_pll, struct pll_init_data *config)
+{
+	int i;
+
+	for (i = 0; i < num_pll; i++)
+		init_pll(&config[i]);
+}

arch/arm/cpu/armv7/keystone/cmd_clock.c

+/*
+ * keystone2: commands for clocks
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/psc_defs.h>
+
+struct pll_init_data cmd_pll_data = {
+	.pll			= MAIN_PLL,
+	.pll_m			= 16,
+	.pll_d			= 1,
+	.pll_od			= 2,
+};
+
+int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	if (argc != 5)
+		goto pll_cmd_usage;
+
+	if (strncmp(argv[1], "pa", 2) == 0)
+		cmd_pll_data.pll = PASS_PLL;
+	else if (strncmp(argv[1], "arm", 3) == 0)
+		cmd_pll_data.pll = TETRIS_PLL;
+	else if (strncmp(argv[1], "ddr3a", 5) == 0)
+		cmd_pll_data.pll = DDR3A_PLL;
+	else if (strncmp(argv[1], "ddr3b", 5) == 0)
+		cmd_pll_data.pll = DDR3B_PLL;
+	else
+		goto pll_cmd_usage;
+
+	cmd_pll_data.pll_m   = simple_strtoul(argv[2], NULL, 10);
+	cmd_pll_data.pll_d   = simple_strtoul(argv[3], NULL, 10);
+	cmd_pll_data.pll_od  = simple_strtoul(argv[4], NULL, 10);
+
+	printf("Trying to set pll %d; mult %d; div %d; OD %d\n",
+	       cmd_pll_data.pll, cmd_pll_data.pll_m,
+	       cmd_pll_data.pll_d, cmd_pll_data.pll_od);
+	init_pll(&cmd_pll_data);
+
+	return 0;
+
+pll_cmd_usage:
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+	pllset,	5,	0,	do_pll_cmd,
+	"set pll multiplier and pre divider",
+	"<pa|arm|ddr3a|ddr3b> <mult> <div> <OD>\n"
+);
+
+int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	unsigned int clk;
+	unsigned int freq;
+
+	if (argc != 2)
+		goto getclk_cmd_usage;
+
+	clk = simple_strtoul(argv[1], NULL, 10);
+
+	freq = clk_get_rate(clk);
+	printf("clock index [%d] - frequency %u\n", clk, freq);
+	return 0;
+
+getclk_cmd_usage:
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+	getclk,	2,	0,	do_getclk_cmd,
+	"get clock rate",
+	"<clk index>\n"
+	"See the 'enum clk_e' in the k2hk clock.h for clk indexes\n"
+);
+
+int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int	psc_module;
+	int	res;
+
+	if (argc != 3)
+		goto psc_cmd_usage;
+
+	psc_module = simple_strtoul(argv[1], NULL, 10);
+	if (strcmp(argv[2], "en") == 0) {
+		res = psc_enable_module(psc_module);
+		printf("psc_enable_module(%d) - %s\n", psc_module,
+		       (res) ? "ERROR" : "OK");
+		return 0;
+	}
+
+	if (strcmp(argv[2], "di") == 0) {
+		res = psc_disable_module(psc_module);
+		printf("psc_disable_module(%d) - %s\n", psc_module,
+		       (res) ? "ERROR" : "OK");
+		return 0;
+	}
+
+	if (strcmp(argv[2], "domain") == 0) {
+		res = psc_disable_domain(psc_module);
+		printf("psc_disable_domain(%d) - %s\n", psc_module,
+		       (res) ? "ERROR" : "OK");
+		return 0;
+	}
+
+psc_cmd_usage:
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+	psc,	3,	0,	do_psc_cmd,
+	"<enable/disable psc module os disable domain>",
+	"<mod/domain index> <en|di|domain>\n"
+	"See the hardware.h for Power and Sleep Controller (PSC) Domains\n"
+);

arch/arm/cpu/armv7/keystone/cmd_mon.c

+/*
+ * K2HK: secure kernel command file
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+asm(".arch_extension sec\n\t");
+
+static int mon_install(u32 addr, u32 dpsc, u32 freq)
+{
+	int result;
+
+	__asm__ __volatile__ (
+		"stmfd r13!, {lr}\n"
+		"mov r0, %1\n"
+		"mov r1, %2\n"
+		"mov r2, %3\n"
+		"blx r0\n"
+		"ldmfd r13!, {lr}\n"
+		: "=&r" (result)
+		: "r" (addr), "r" (dpsc), "r" (freq)
+		: "cc", "r0", "r1", "r2", "memory");
+	return result;
+}
+
+static int do_mon_install(cmd_tbl_t *cmdtp, int flag, int argc,
+			  char * const argv[])
+{
+	u32 addr, dpsc_base = 0x1E80000, freq;
+	int     rcode = 0;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	freq = clk_get_rate(sys_clk0_6_clk);
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+
+	rcode = mon_install(addr, dpsc_base, freq);
+	printf("## installed monitor, freq [%d], status %d\n",
+	       freq, rcode);
+
+	return 0;
+}
+
+U_BOOT_CMD(mon_install, 2, 0, do_mon_install,
+	   "Install boot kernel at 'addr'",
+	   ""
+);
+
+static void core_spin(void)
+{
+	while (1)
+		; /* forever */;
+}
+
+int mon_power_on(int core_id, void *ep)
+{
+	int result;
+
+	asm volatile (
+		"stmfd  r13!, {lr}\n"
+		"mov r1, %1\n"
+		"mov r2, %2\n"
+		"mov r0, #0\n"
+		"smc	#0\n"
+		"ldmfd  r13!, {lr}\n"
+		: "=&r" (result)
+		: "r" (core_id), "r" (ep)
+		: "cc", "r0", "r1", "r2", "memory");
+	return  result;
+}
+
+int mon_power_off(int core_id)
+{
+	int result;
+
+	asm volatile (
+		"stmfd  r13!, {lr}\n"
+		"mov r1, %1\n"
+		"mov r0, #1\n"
+		"smc	#1\n"
+		"ldmfd  r13!, {lr}\n"
+		: "=&r" (result)
+		: "r" (core_id)
+		: "cc", "r0", "r1", "memory");
+	return  result;
+}
+
+int do_mon_power(cmd_tbl_t *cmdtp, int flag, int argc,
+			char * const argv[])
+{
+	int     rcode = 0, core_id, on;
+	void (*fn)(void);
+
+	fn = core_spin;
+
+	if (argc < 3)
+		return CMD_RET_USAGE;
+
+	core_id = simple_strtoul(argv[1], NULL, 16);
+	on = simple_strtoul(argv[2], NULL, 16);
+
+	if (on)
+		rcode = mon_power_on(core_id, fn);
+	else
+		rcode = mon_power_off(core_id);
+
+	if (on) {
+		if (!rcode)
+			printf("core %d powered on successfully\n", core_id);
+		else
+			printf("core %d power on failure\n", core_id);
+	} else {
+		printf("core %d powered off successfully\n", core_id);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(mon_power, 3, 0, do_mon_power,
+	   "Power On/Off secondary core",
+	   "mon_power <coreid> <oper>\n"
+	   "- coreid (1-3) and oper (1 - ON, 0 - OFF)\n"
+	   ""
+);

arch/arm/cpu/armv7/keystone/ddr3.c

+/*
+ * Keystone2: DDR3 initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
+{
+	unsigned int tmp;
+
+	while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET)
+		 & 0x00000001) != 0x00000001)
+		;
+
+	__raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET);
+
+	tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET);
+	tmp &= ~(phy_cfg->pgcr1_mask);
+	tmp |= phy_cfg->pgcr1_val;
+	__raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET);
+
+	__raw_writel(phy_cfg->ptr0,   base + KS2_DDRPHY_PTR0_OFFSET);
+	__raw_writel(phy_cfg->ptr1,   base + KS2_DDRPHY_PTR1_OFFSET);
+	__raw_writel(phy_cfg->ptr3,  base + KS2_DDRPHY_PTR3_OFFSET);
+	__raw_writel(phy_cfg->ptr4,  base + KS2_DDRPHY_PTR4_OFFSET);
+
+	tmp =  __raw_readl(base + KS2_DDRPHY_DCR_OFFSET);
+	tmp &= ~(phy_cfg->dcr_mask);
+	tmp |= phy_cfg->dcr_val;
+	__raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET);
+
+	__raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET);
+	__raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET);
+	__raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET);
+	__raw_writel(phy_cfg->mr0,   base + KS2_DDRPHY_MR0_OFFSET);
+	__raw_writel(phy_cfg->mr1,   base + KS2_DDRPHY_MR1_OFFSET);
+	__raw_writel(phy_cfg->mr2,   base + KS2_DDRPHY_MR2_OFFSET);
+	__raw_writel(phy_cfg->dtcr,  base + KS2_DDRPHY_DTCR_OFFSET);
+	__raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET);
+
+	__raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET);
+	__raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET);
+	__raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET);
+
+	__raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET);
+	while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
+		;
+
+	__raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET);
+	while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
+		;
+}
+
+void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg)
+{
+	__raw_writel(emif_cfg->sdcfg,  base + KS2_DDR3_SDCFG_OFFSET);
+	__raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET);
+	__raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET);
+	__raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET);
+	__raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET);
+	__raw_writel(emif_cfg->zqcfg,  base + KS2_DDR3_ZQCFG_OFFSET);
+	__raw_writel(emif_cfg->sdrfc,  base + KS2_DDR3_SDRFC_OFFSET);
+}

arch/arm/cpu/armv7/keystone/init.c

+/*
+ * Keystone2: Architecture initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+
+void chip_configuration_unlock(void)
+{
+	__raw_writel(KEYSTONE_KICK0_MAGIC, KEYSTONE_KICK0);
+	__raw_writel(KEYSTONE_KICK1_MAGIC, KEYSTONE_KICK1);
+}
+
+int arch_cpu_init(void)
+{
+	chip_configuration_unlock();
+	icache_enable();
+
+#ifdef CONFIG_SOC_K2HK
+	share_all_segments(8);
+	share_all_segments(9);
+	share_all_segments(10); /* QM PDSP */
+	share_all_segments(11); /* PCIE */
+#endif
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	volatile u32 *rstctrl = (volatile u32 *)(KS2_RSTCTRL);
+	u32 tmp;
+
+	tmp = *rstctrl & KS2_RSTCTRL_MASK;
+	*rstctrl = tmp | KS2_RSTCTRL_KEY;
+
+	*rstctrl &= KS2_RSTCTRL_SWRST;
+
+	for (;;)
+		;
+}
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_DCACHE_OFF
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+#endif
+}

arch/arm/cpu/armv7/keystone/keystone_nav.c

+/*
+ * Multicore Navigator driver for TI Keystone 2 devices.
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/keystone_nav.h>
+
+static int soc_type =
+#ifdef CONFIG_SOC_K2HK
+	k2hk;
+#endif
+
+struct qm_config k2hk_qm_memmap = {
+	.stat_cfg	= 0x02a40000,
+	.queue		= (struct qm_reg_queue *)0x02a80000,
+	.mngr_vbusm	= 0x23a80000,
+	.i_lram		= 0x00100000,
+	.proxy		= (struct qm_reg_queue *)0x02ac0000,
+	.status_ram	= 0x02a06000,
+	.mngr_cfg	= (struct qm_cfg_reg *)0x02a02000,
+	.intd_cfg	= 0x02a0c000,
+	.desc_mem	= (struct descr_mem_setup_reg *)0x02a03000,
+	.region_num	= 64,
+	.pdsp_cmd	= 0x02a20000,
+	.pdsp_ctl	= 0x02a0f000,
+	.pdsp_iram	= 0x02a10000,
+	.qpool_num	= 4000,
+};
+
+/*
+ * We are going to use only one type of descriptors - host packet
+ * descriptors. We staticaly allocate memory for them here
+ */
+struct qm_host_desc desc_pool[HDESC_NUM] __aligned(sizeof(struct qm_host_desc));
+
+static struct qm_config *qm_cfg;
+
+inline int num_of_desc_to_reg(int num_descr)
+{
+	int j, num;
+
+	for (j = 0, num = 32; j < 15; j++, num *= 2) {
+		if (num_descr <= num)
+			return j;
+	}
+
+	return 15;
+}
+
+static int _qm_init(struct qm_config *cfg)
+{
+	u32	j;
+
+	if (cfg == NULL)
+		return QM_ERR;
+
+	qm_cfg = cfg;
+
+	qm_cfg->mngr_cfg->link_ram_base0	= qm_cfg->i_lram;
+	qm_cfg->mngr_cfg->link_ram_size0	= HDESC_NUM * 8;
+	qm_cfg->mngr_cfg->link_ram_base1	= 0;
+	qm_cfg->mngr_cfg->link_ram_size1	= 0;
+	qm_cfg->mngr_cfg->link_ram_base2	= 0;
+
+	qm_cfg->desc_mem[0].base_addr = (u32)desc_pool;
+	qm_cfg->desc_mem[0].start_idx = 0;
+	qm_cfg->desc_mem[0].desc_reg_size =
+		(((sizeof(struct qm_host_desc) >> 4) - 1) << 16) |
+		num_of_desc_to_reg(HDESC_NUM);
+
+	memset(desc_pool, 0, sizeof(desc_pool));
+	for (j = 0; j < HDESC_NUM; j++)
+		qm_push(&desc_pool[j], qm_cfg->qpool_num);
+
+	return QM_OK;
+}
+
+int qm_init(void)
+{
+	switch (soc_type) {
+	case k2hk:
+		return _qm_init(&k2hk_qm_memmap);
+	}
+
+	return QM_ERR;
+}
+
+void qm_close(void)
+{
+	u32	j;
+
+	if (qm_cfg == NULL)
+		return;
+
+	queue_close(qm_cfg->qpool_num);
+
+	qm_cfg->mngr_cfg->link_ram_base0	= 0;
+	qm_cfg->mngr_cfg->link_ram_size0	= 0;
+	qm_cfg->mngr_cfg->link_ram_base1	= 0;
+	qm_cfg->mngr_cfg->link_ram_size1	= 0;
+	qm_cfg->mngr_cfg->link_ram_base2	= 0;
+
+	for (j = 0; j < qm_cfg->region_num; j++) {
+		qm_cfg->desc_mem[j].base_addr = 0;
+		qm_cfg->desc_mem[j].start_idx = 0;
+		qm_cfg->desc_mem[j].desc_reg_size = 0;
+	}
+
+	qm_cfg = NULL;
+}
+
+void qm_push(struct qm_host_desc *hd, u32 qnum)
+{
+	u32 regd;
+
+	if (!qm_cfg)
+		return;
+
+	cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4);
+	regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1);
+	writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh);
+}
+
+void qm_buff_push(struct qm_host_desc *hd, u32 qnum,
+		    void *buff_ptr, u32 buff_len)
+{
+	hd->orig_buff_len = buff_len;
+	hd->buff_len = buff_len;
+	hd->orig_buff_ptr = (u32)buff_ptr;
+	hd->buff_ptr = (u32)buff_ptr;
+	qm_push(hd, qnum);
+}
+
+struct qm_host_desc *qm_pop(u32 qnum)
+{
+	u32 uhd;
+
+	if (!qm_cfg)
+		return NULL;
+
+	uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf;
+	if (uhd)
+		cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4);
+
+	return (struct qm_host_desc *)uhd;
+}
+
+struct qm_host_desc *qm_pop_from_free_pool(void)
+{
+	if (!qm_cfg)
+		return NULL;
+
+	return qm_pop(qm_cfg->qpool_num);
+}
+
+void queue_close(u32 qnum)
+{
+	struct qm_host_desc *hd;
+
+	while ((hd = qm_pop(qnum)))
+		;
+}
+
+/*
+ * DMA API
+ */
+
+struct pktdma_cfg k2hk_netcp_pktdma = {
+	.global		= (struct global_ctl_regs *)0x02004000,
+	.tx_ch		= (struct tx_chan_regs *)0x02004400,
+	.tx_ch_num	= 9,
+	.rx_ch		= (struct rx_chan_regs *)0x02004800,
+	.rx_ch_num	= 26,
+	.tx_sched	= (u32 *)0x02004c00,
+	.rx_flows	= (struct rx_flow_regs *)0x02005000,
+	.rx_flow_num	= 32,
+	.rx_free_q	= 4001,
+	.rx_rcv_q	= 4002,
+	.tx_snd_q	= 648,
+};
+
+struct pktdma_cfg *netcp;
+
+static int netcp_rx_disable(void)
+{
+	u32 j, v, k;
+
+	for (j = 0; j < netcp->rx_ch_num; j++) {
+		v = readl(&netcp->rx_ch[j].cfg_a);
+		if (!(v & CPDMA_CHAN_A_ENABLE))
+			continue;
+
+		writel(v | CPDMA_CHAN_A_TDOWN, &netcp->rx_ch[j].cfg_a);
+		for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) {
+			udelay(100);
+			v = readl(&netcp->rx_ch[j].cfg_a);
+			if (!(v & CPDMA_CHAN_A_ENABLE))
+				continue;
+		}
+		/* TODO: teardown error on if TDOWN_TIMEOUT_COUNT is reached */
+	}
+
+	/* Clear all of the flow registers */
+	for (j = 0; j < netcp->rx_flow_num; j++) {
+		writel(0, &netcp->rx_flows[j].control);
+		writel(0, &netcp->rx_flows[j].tags);
+		writel(0, &netcp->rx_flows[j].tag_sel);
+		writel(0, &netcp->rx_flows[j].fdq_sel[0]);
+		writel(0, &netcp->rx_flows[j].fdq_sel[1]);
+		writel(0, &netcp->rx_flows[j].thresh[0]);
+		writel(0, &netcp->rx_flows[j].thresh[1]);
+		writel(0, &netcp->rx_flows[j].thresh[2]);
+	}
+
+	return QM_OK;
+}
+
+static int netcp_tx_disable(void)
+{
+	u32 j, v, k;
+
+	for (j = 0; j < netcp->tx_ch_num; j++) {
+		v = readl(&netcp->tx_ch[j].cfg_a);
+		if (!(v & CPDMA_CHAN_A_ENABLE))
+			continue;
+
+		writel(v | CPDMA_CHAN_A_TDOWN, &netcp->tx_ch[j].cfg_a);
+		for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) {
+			udelay(100);
+			v = readl(&netcp->tx_ch[j].cfg_a);
+			if (!(v & CPDMA_CHAN_A_ENABLE))
+				continue;
+		}
+		/* TODO: teardown error on if TDOWN_TIMEOUT_COUNT is reached */
+	}
+
+	return QM_OK;
+}
+
+static int _netcp_init(struct pktdma_cfg *netcp_cfg,
+		       struct rx_buff_desc *rx_buffers)
+{
+	u32 j, v;
+	struct qm_host_desc *hd;
+	u8 *rx_ptr;
+
+	if (netcp_cfg == NULL || rx_buffers == NULL ||
+	    rx_buffers->buff_ptr == NULL || qm_cfg == NULL)
+		return QM_ERR;
+
+	netcp = netcp_cfg;
+	netcp->rx_flow = rx_buffers->rx_flow;
+
+	/* init rx queue */
+	rx_ptr = rx_buffers->buff_ptr;
+
+	for (j = 0; j < rx_buffers->num_buffs; j++) {
+		hd = qm_pop(qm_cfg->qpool_num);
+		if (hd == NULL)
+			return QM_ERR;
+
+		qm_buff_push(hd, netcp->rx_free_q,
+			     rx_ptr, rx_buffers->buff_len);
+
+		rx_ptr += rx_buffers->buff_len;
+	}
+
+	netcp_rx_disable();
+
+	/* configure rx channels */
+	v = CPDMA_REG_VAL_MAKE_RX_FLOW_A(1, 1, 0, 0, 0, 0, 0, netcp->rx_rcv_q);
+	writel(v, &netcp->rx_flows[netcp->rx_flow].control);
+	writel(0, &netcp->rx_flows[netcp->rx_flow].tags);
+	writel(0, &netcp->rx_flows[netcp->rx_flow].tag_sel);
+
+	v = CPDMA_REG_VAL_MAKE_RX_FLOW_D(0, netcp->rx_free_q, 0,
+					 netcp->rx_free_q);
+
+	writel(v, &netcp->rx_flows[netcp->rx_flow].fdq_sel[0]);
+	writel(v, &netcp->rx_flows[netcp->rx_flow].fdq_sel[1]);
+	writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[0]);
+	writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[1]);
+	writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[2]);
+
+	for (j = 0; j < netcp->rx_ch_num; j++)
+		writel(CPDMA_CHAN_A_ENABLE, &netcp->rx_ch[j].cfg_a);
+
+	/* configure tx channels */
+	/* Disable loopback in the tx direction */
+	writel(0, &netcp->global->emulation_control);
+
+/* TODO: make it dependend on a soc type variable */
+#ifdef CONFIG_SOC_K2HK
+	/* Set QM base address, only for K2x devices */
+	writel(0x23a80000, &netcp->global->qm_base_addr[0]);
+#endif
+
+	/* Enable all channels. The current state isn't important */
+	for (j = 0; j < netcp->tx_ch_num; j++)  {
+		writel(0, &netcp->tx_ch[j].cfg_b);
+		writel(CPDMA_CHAN_A_ENABLE, &netcp->tx_ch[j].cfg_a);
+	}
+
+	return QM_OK;
+}
+
+int netcp_init(struct rx_buff_desc *rx_buffers)
+{
+	switch (soc_type) {
+	case k2hk:
+		_netcp_init(&k2hk_netcp_pktdma, rx_buffers);
+		return QM_OK;
+	}
+	return QM_ERR;
+}
+
+int netcp_close(void)
+{
+	if (!netcp)
+		return QM_ERR;
+
+	netcp_tx_disable();
+	netcp_rx_disable();
+
+	queue_close(netcp->rx_free_q);
+	queue_close(netcp->rx_rcv_q);
+	queue_close(netcp->tx_snd_q);
+
+	return QM_OK;
+}
+
+int netcp_send(u32 *pkt, int num_bytes, u32 swinfo2)
+{
+	struct qm_host_desc *hd;
+
+	hd = qm_pop(qm_cfg->qpool_num);
+	if (hd == NULL)
+		return QM_ERR;
+
+	hd->desc_info	= num_bytes;
+	hd->swinfo[2]	= swinfo2;
+	hd->packet_info = qm_cfg->qpool_num;
+
+	qm_buff_push(hd, netcp->tx_snd_q, pkt, num_bytes);
+
+	return QM_OK;
+}
+
+void *netcp_recv(u32 **pkt, int *num_bytes)
+{
+	struct qm_host_desc *hd;
+
+	hd = qm_pop(netcp->rx_rcv_q);
+	if (!hd)
+		return NULL;
+
+	*pkt = (u32 *)hd->buff_ptr;
+	*num_bytes = hd->desc_info & 0x3fffff;
+
+	return hd;
+}
+
+void netcp_release_rxhd(void *hd)
+{
+	struct qm_host_desc *_hd = (struct qm_host_desc *)hd;
+
+	_hd->buff_len = _hd->orig_buff_len;
+	_hd->buff_ptr = _hd->orig_buff_ptr;
+
+	qm_push(_hd, netcp->rx_free_q);
+}

arch/arm/cpu/armv7/keystone/msmc.c

+/*
+ * MSMC controller utilities
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+struct mpax {
+	u32	mpaxl;
+	u32	mpaxh;
+};
+
+struct msms_regs {
+	u32	pid;
+	u32	_res_04;
+	u32	smcerrar;
+	u32	smcerrxr;
+	u32	smedcc;
+	u32	smcea;
+	u32	smsecc;
+	u32	smpfar;
+	u32	smpfxr;
+	u32	smpfr;
+	u32	smpfcr;
+	u32	_res_2c;
+	u32	sbndc[8];
+	u32	sbndm;
+	u32	sbnde;
+	u32	_res_58;
+	u32	cfglck;
+	u32	cfgulck;
+	u32	cfglckstat;
+	u32	sms_mpax_lck;
+	u32	sms_mpax_ulck;
+	u32	sms_mpax_lckstat;
+	u32	ses_mpax_lck;
+	u32	ses_mpax_ulck;
+	u32	ses_mpax_lckstat;
+	u32	smestat;
+	u32	smirstat;
+	u32	smirc;
+	u32	smiestat;
+	u32	smiec;
+	u32	_res_94_c0[12];
+	u32	smncerrar;
+	u32	smncerrxr;
+	u32	smncea;
+	u32	_res_d0_1fc[76];
+	struct mpax sms[16][8];
+	struct mpax ses[16][8];
+};
+
+
+void share_all_segments(int priv_id)
+{
+	struct msms_regs *msmc = (struct msms_regs *)K2HK_MSMC_CTRL_BASE;
+	int j;
+
+	for (j = 0; j < 8; j++) {
+		msmc->sms[priv_id][j].mpaxh &= 0xffffff7ful;
+		msmc->ses[priv_id][j].mpaxh &= 0xffffff7ful;
+	}
+}

arch/arm/cpu/armv7/keystone/psc.c

+/*
+ * Keystone: PSC configuration module
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm-generic/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/psc_defs.h>
+
+#define DEVICE_REG32_R(addr)			__raw_readl((u32 *)(addr))
+#define DEVICE_REG32_W(addr, val)		__raw_writel(val, (u32 *)(addr))
+
+#ifdef CONFIG_SOC_K2HK
+#define DEVICE_PSC_BASE				K2HK_PSC_BASE
+#endif
+
+int psc_delay(void)
+{
+	udelay(10);
+	return 10;
+}
+
+/*
+ * FUNCTION PURPOSE: Wait for end of transitional state
+ *
+ * DESCRIPTION: Polls pstat for the selected domain and waits for transitions
+ *              to be complete.
+ *
+ *              Since this is boot loader code it is *ASSUMED* that interrupts
+ *              are disabled and no other core is mucking around with the psc
+ *              at the same time.
+ *
+ *              Returns 0 when the domain is free. Returns -1 if a timeout
+ *              occurred waiting for the completion.
+ */
+int psc_wait(u32 domain_num)
+{
+	u32 retry;
+	u32 ptstat;
+
+	/*
+	 * Do nothing if the power domain is in transition. This should never
+	 * happen since the boot code is the only software accesses psc.
+	 * It's still remotely possible that the hardware state machines
+	 * initiate transitions.
+	 * Don't trap if the domain (or a module in this domain) is
+	 * stuck in transition.
+	 */
+	retry = 0;
+
+	do {
+		ptstat = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PSTAT);
+		ptstat = ptstat & (1 << domain_num);
+	} while ((ptstat != 0) && ((retry += psc_delay()) <
+		 PSC_PTSTAT_TIMEOUT_LIMIT));
+
+	if (retry >= PSC_PTSTAT_TIMEOUT_LIMIT)
+		return -1;
+
+	return 0;
+}
+
+u32 psc_get_domain_num(u32 mod_num)
+{
+	u32 domain_num;
+
+	/* Get the power domain associated with the module number */
+	domain_num = DEVICE_REG32_R(DEVICE_PSC_BASE +
+				    PSC_REG_MDCFG(mod_num));
+	domain_num = PSC_REG_MDCFG_GET_PD(domain_num);
+
+	return domain_num;
+}
+
+/*
+ * FUNCTION PURPOSE: Power up/down a module
+ *
+ * DESCRIPTION: Powers up/down the requested module and the associated power
+ *		domain if required. No action is taken it the module is
+ *		already powered up/down.
+ *
+ *              This only controls modules. The domain in which the module
+ *              resides will be left in the power on state. Multiple modules
+ *              can exist in a power domain, so powering down the domain based
+ *              on a single module is not done.
+ *
+ *              Returns 0 on success, -1 if the module can't be powered up, or
+ *              if there is a timeout waiting for the transition.
+ */
+int psc_set_state(u32 mod_num, u32 state)
+{
+	u32 domain_num;
+	u32 pdctl;
+	u32 mdctl;
+	u32 ptcmd;
+	u32 reset_iso;
+	u32 v;
+
+	/*
+	 * Get the power domain associated with the module number, and reset
+	 * isolation functionality
+	 */
+	v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num));
+	domain_num = PSC_REG_MDCFG_GET_PD(v);
+	reset_iso  = PSC_REG_MDCFG_GET_RESET_ISO(v);
+
+	/* Wait for the status of the domain/module to be non-transitional */
+	if (psc_wait(domain_num) != 0)
+		return -1;
+
+	/*
+	 * Perform configuration even if the current status matches the
+	 * existing state
+	 *
+	 * Set the next state of the power domain to on. It's OK if the domain
+	 * is always on. This code will not ever power down a domain, so no
+	 * change is made if the new state is power down.
+	 */
+	if (state == PSC_REG_VAL_MDCTL_NEXT_ON) {
+		pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE +
+				       PSC_REG_PDCTL(domain_num));
+		pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl,
+					       PSC_REG_VAL_PDCTL_NEXT_ON);
+		DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num),
+			       pdctl);
+	}
+
+	/* Set the next state for the module to enabled/disabled */
+	mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, state);
+	mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, reset_iso);
+	DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl);
+
+	/* Trigger the enable */
+	ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD);
+	ptcmd |= (u32)(1<<domain_num);
+	DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd);
+
+	/* Wait on the complete */
+	return psc_wait(domain_num);
+}
+
+/*
+ * FUNCTION PURPOSE: Power up a module
+ *
+ * DESCRIPTION: Powers up the requested module and the associated power domain
+ *              if required. No action is taken it the module is already
+ *              powered up.
+ *
+ *              Returns 0 on success, -1 if the module can't be powered up, or
+ *              if there is a timeout waiting for the transition.
+ */
+int psc_enable_module(u32 mod_num)
+{
+	u32 mdctl;
+
+	/* Set the bit to apply reset */
+	mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	if ((mdctl & 0x3f) == PSC_REG_VAL_MDSTAT_STATE_ON)
+		return 0;
+
+	return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_ON);
+}
+
+/*
+ * FUNCTION PURPOSE: Power down a module
+ *
+ * DESCRIPTION: Powers down the requested module.
+ *
+ *              Returns 0 on success, -1 on failure or timeout.
+ */
+int psc_disable_module(u32 mod_num)
+{
+	u32 mdctl;
+
+	/* Set the bit to apply reset */
+	mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	if ((mdctl & 0x3f) == 0)
+		return 0;
+	mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0);
+	DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl);
+
+	return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE);
+}
+
+/*
+ * FUNCTION PURPOSE: Set the reset isolation bit in mdctl
+ *
+ * DESCRIPTION: The reset isolation enable bit is set. The state of the module
+ *              is not changed. Returns 0 if the module config showed that
+ *              reset isolation is supported. Returns 1 otherwise. This is not
+ *              an error, but setting the bit in mdctl has no effect.
+ */
+int psc_set_reset_iso(u32 mod_num)
+{
+	u32 v;
+	u32 mdctl;
+
+	/* Set the reset isolation bit */
+	mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, 1);
+	DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl);
+
+	v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num));
+	if (PSC_REG_MDCFG_GET_RESET_ISO(v) == 1)
+		return 0;
+
+	return 1;
+}
+
+/*
+ * FUNCTION PURPOSE: Disable a power domain
+ *
+ * DESCRIPTION: The power domain is disabled
+ */
+int psc_disable_domain(u32 domain_num)
+{
+	u32 pdctl;
+	u32 ptcmd;
+
+	pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num));
+	pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_OFF);
+	pdctl = PSC_REG_PDCTL_SET_PDMODE(pdctl, PSC_REG_VAL_PDCTL_PDMODE_SLEEP);
+	DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl);
+
+	ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD);
+	ptcmd |= (u32)(1 << domain_num);
+	DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd);
+
+	return psc_wait(domain_num);
+}

arch/arm/cpu/armv7/keystone/spl.c

+/*
+ * common spl init code
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+#include <config.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <spl.h>
+#include <spi_flash.h>
+
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pll_init_data spl_pll_config[] = {
+	CORE_PLL_799,
+	TETRIS_PLL_500,
+};
+
+void spl_init_keystone_plls(void)
+{
+	init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config);
+}
+
+void spl_board_init(void)
+{
+	spl_init_keystone_plls();
+	preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+#if defined(CONFIG_SPL_SPI_LOAD)
+	return BOOT_DEVICE_SPI;
+#else
+	puts("Unknown boot device\n");
+	hang();
+#endif
+}

arch/arm/cpu/armv7/omap-common/boot-common.c

@@ -56,6 +56,17 @@ void save_omap_boot_params(void)
 					*((u32 *)(dev_data + BOOT_MODE_OFFSET));
 		}
 	}
+
+#ifdef CONFIG_DRA7XX
+	/*
+	 * We get different values for QSPI_1 and QSPI_4 being used, but
+	 * don't actually care about this difference.  Rather than
+	 * mangle the later code, if we're coming in as QSPI_4 just
+	 * change to the QSPI_1 value.
+	 */
+	if (gd->arch.omap_boot_params.omap_bootdevice == 11)
+		gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI;
+#endif
 }
 
 #ifdef CONFIG_SPL_BUILD

arch/arm/cpu/armv7/omap-common/utils.c

@@ -5,6 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #include <common.h>
+#include <asm/arch/sys_proto.h>
 static void do_cancel_out(u32 *num, u32 *den, u32 factor)
 {
 	while (1) {
@@ -39,3 +40,23 @@ void cancel_out(u32 *num, u32 *den, u32 den_limit)
 		*den = (*den + 1) / 2;
 	}
 }
+
+void __weak usb_fake_mac_from_die_id(u32 *id)
+{
+	uint8_t device_mac[6];
+
+	if (!getenv("usbethaddr")) {
+		/*
+		 * create a fake MAC address from the processor ID code.
+		 * first byte is 0x02 to signify locally administered.
+		 */
+		device_mac[0] = 0x02;
+		device_mac[1] = id[3] & 0xff;
+		device_mac[2] = id[2] & 0xff;
+		device_mac[3] = id[1] & 0xff;
+		device_mac[4] = id[0] & 0xff;
+		device_mac[5] = (id[0] >> 8) & 0xff;
+
+		eth_setenv_enetaddr("usbethaddr", device_mac);
+	}
+}

arch/arm/cpu/armv7/omap3/board.c

@@ -290,8 +290,8 @@ void watchdog_init(void)
 	 * should not be running and does not generate a PRCM reset.
 	 */
 
-	sr32(&prcm_base->fclken_wkup, 5, 1, 1);
-	sr32(&prcm_base->iclken_wkup, 5, 1, 1);
+	setbits_le32(&prcm_base->fclken_wkup, 0x20);
+	setbits_le32(&prcm_base->iclken_wkup, 0x20);
 	wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5);
 
 	writel(WD_UNLOCK1, &wd2_base->wspr);

arch/arm/cpu/armv7/omap3/sys_info.c

@@ -40,12 +40,24 @@ static char *rev_s_37xx[CPU_37XX_MAX_REV] = {
 				"1.2"};
 #endif /* CONFIG_DISPLAY_CPUINFO */
 
+/*****************************************************************
+ * get_dieid(u32 *id) - read die ID
+ *****************************************************************/
+void get_dieid(u32 *id)
+{
+	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
+
+	id[3] = readl(&id_base->die_id_0);
+	id[2] = readl(&id_base->die_id_1);
+	id[1] = readl(&id_base->die_id_2);
+	id[0] = readl(&id_base->die_id_3);
+}
+
 /*****************************************************************
  * dieid_num_r(void) - read and set die ID
  *****************************************************************/
 void dieid_num_r(void)
 {
-	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
 	char *uid_s, die_id[34];
 	u32 id[4];
 
@@ -54,10 +66,7 @@ void dieid_num_r(void)
 	uid_s = getenv("dieid#");
 
 	if (uid_s == NULL) {
-		id[3] = readl(&id_base->die_id_0);
-		id[2] = readl(&id_base->die_id_1);
-		id[1] = readl(&id_base->die_id_2);
-		id[0] = readl(&id_base->die_id_3);
+		get_dieid(id);
 		sprintf(die_id, "%08x%08x%08x%08x", id[0], id[1], id[2], id[3]);
 		setenv("dieid#", die_id);
 		uid_s = die_id;

arch/arm/cpu/armv7/syslib.c

@@ -24,19 +24,6 @@ void sdelay(unsigned long loops)
 			  "bne 1b":"=r" (loops):"0"(loops));
 }
 
-/*****************************************************************
- * sr32 - clear & set a value in a bit range for a 32 bit address
- *****************************************************************/
-void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value)
-{
-	u32 tmp, msk = 0;
-	msk = 1 << num_bits;
-	--msk;
-	tmp = readl((u32)addr) & ~(msk << start_bit);
-	tmp |= value << start_bit;
-	writel(tmp, (u32)addr);
-}
-
 /*********************************************************************
  * wait_on_value() - common routine to allow waiting for changes in
  *   volatile regs.

arch/arm/cpu/tegra-common/Makefile

@@ -7,6 +7,10 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+obj-y += ap.o
+obj-y += board.o
+obj-y += cache.o
+obj-y += clock.o
 obj-y += lowlevel_init.o
-obj-y	+= ap.o board.o clock.o cache.o
+obj-y += pinmux-common.o
 obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o

arch/arm/cpu/tegra-common/pinmux-common.c

+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+
+/* return 1 if a pingrp is in range */
+#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PMUX_PINGRP_COUNT))
+
+/* return 1 if a pmux_func is in range */
+#define pmux_func_isvalid(func) \
+	(((func) >= 0) && ((func) < PMUX_FUNC_COUNT))
+
+/* return 1 if a pin_pupd_is in range */
+#define pmux_pin_pupd_isvalid(pupd) \
+	(((pupd) >= PMUX_PULL_NORMAL) && ((pupd) <= PMUX_PULL_UP))
+
+/* return 1 if a pin_tristate_is in range */
+#define pmux_pin_tristate_isvalid(tristate) \
+	(((tristate) >= PMUX_TRI_NORMAL) && ((tristate) <= PMUX_TRI_TRISTATE))
+
+#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+/* return 1 if a pin_io_is in range */
+#define pmux_pin_io_isvalid(io) \
+	(((io) >= PMUX_PIN_OUTPUT) && ((io) <= PMUX_PIN_INPUT))
+
+/* return 1 if a pin_lock is in range */
+#define pmux_pin_lock_isvalid(lock) \
+	(((lock) >= PMUX_PIN_LOCK_DISABLE) && ((lock) <= PMUX_PIN_LOCK_ENABLE))
+
+/* return 1 if a pin_od is in range */
+#define pmux_pin_od_isvalid(od) \
+	(((od) >= PMUX_PIN_OD_DISABLE) && ((od) <= PMUX_PIN_OD_ENABLE))
+
+/* return 1 if a pin_ioreset_is in range */
+#define pmux_pin_ioreset_isvalid(ioreset) \
+	(((ioreset) >= PMUX_PIN_IO_RESET_DISABLE) && \
+	 ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
+
+#ifdef TEGRA_PMX_HAS_RCV_SEL
+/* return 1 if a pin_rcv_sel_is in range */
+#define pmux_pin_rcv_sel_isvalid(rcv_sel) \
+	(((rcv_sel) >= PMUX_PIN_RCV_SEL_NORMAL) && \
+	 ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
+#endif /* TEGRA_PMX_HAS_RCV_SEL */
+#endif /* TEGRA_PMX_HAS_PIN_IO_BIT_ETC */
+
+#define _R(offset)	(u32 *)(NV_PA_APB_MISC_BASE + (offset))
+
+#if defined(CONFIG_TEGRA20)
+
+#define MUX_REG(grp)	_R(0x80 + ((tegra_soc_pingroups[grp].ctl_id / 16) * 4))
+#define MUX_SHIFT(grp)	((tegra_soc_pingroups[grp].ctl_id % 16) * 2)
+
+#define PULL_REG(grp)	_R(0xa0 + ((tegra_soc_pingroups[grp].pull_id / 16) * 4))
+#define PULL_SHIFT(grp)	((tegra_soc_pingroups[grp].pull_id % 16) * 2)
+
+#define TRI_REG(grp)	_R(0x14 + (((grp) / 32) * 4))
+#define TRI_SHIFT(grp)	((grp) % 32)
+
+#else
+
+#define REG(pin)	_R(0x3000 + ((pin) * 4))
+
+#define MUX_REG(pin)	REG(pin)
+#define MUX_SHIFT(pin)	0
+
+#define PULL_REG(pin)	REG(pin)
+#define PULL_SHIFT(pin)	2
+
+#define TRI_REG(pin)	REG(pin)
+#define TRI_SHIFT(pin)	4
+
+#endif /* CONFIG_TEGRA20 */
+
+#define DRV_REG(group)	_R(0x868 + ((group) * 4))
+
+#define IO_SHIFT	5
+#define OD_SHIFT	6
+#define LOCK_SHIFT	7
+#define IO_RESET_SHIFT	8
+#define RCV_SEL_SHIFT	9
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+	u32 *reg = MUX_REG(pin);
+	int i, mux = -1;
+	u32 val;
+
+	/* Error check on pin and func */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_func_isvalid(func));
+
+	if (func >= PMUX_FUNC_RSVD1) {
+		mux = (func - PMUX_FUNC_RSVD1) & 3;
+	} else {
+		/* Search for the appropriate function */
+		for (i = 0; i < 4; i++) {
+			if (tegra_soc_pingroups[pin].funcs[i] == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+	assert(mux != -1);
+
+	val = readl(reg);
+	val &= ~(3 << MUX_SHIFT(pin));
+	val |= (mux << MUX_SHIFT(pin));
+	writel(val, reg);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+	u32 *reg = PULL_REG(pin);
+	u32 val;
+
+	/* Error check on pin and pupd */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_pupd_isvalid(pupd));
+
+	val = readl(reg);
+	val &= ~(3 << PULL_SHIFT(pin));
+	val |= (pupd << PULL_SHIFT(pin));
+	writel(val, reg);
+}
+
+static void pinmux_set_tristate(enum pmux_pingrp pin, int tri)
+{
+	u32 *reg = TRI_REG(pin);
+	u32 val;
+
+	/* Error check on pin */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_tristate_isvalid(tri));
+
+	val = readl(reg);
+	if (tri == PMUX_TRI_TRISTATE)
+		val |= (1 << TRI_SHIFT(pin));
+	else
+		val &= ~(1 << TRI_SHIFT(pin));
+	writel(val, reg);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, PMUX_TRI_TRISTATE);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, PMUX_TRI_NORMAL);
+}
+
+#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (io == PMUX_PIN_NONE)
+		return;
+
+	/* Error check on pin and io */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_io_isvalid(io));
+
+	val = readl(reg);
+	if (io == PMUX_PIN_INPUT)
+		val |= (io & 1) << IO_SHIFT;
+	else
+		val &= ~(1 << IO_SHIFT);
+	writel(val, reg);
+}
+
+static void pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (lock == PMUX_PIN_LOCK_DEFAULT)
+		return;
+
+	/* Error check on pin and lock */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_lock_isvalid(lock));
+
+	val = readl(reg);
+	if (lock == PMUX_PIN_LOCK_ENABLE) {
+		val |= (1 << LOCK_SHIFT);
+	} else {
+		if (val & (1 << LOCK_SHIFT))
+			printf("%s: Cannot clear LOCK bit!\n", __func__);
+		val &= ~(1 << LOCK_SHIFT);
+	}
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (od == PMUX_PIN_OD_DEFAULT)
+		return;
+
+	/* Error check on pin and od */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_od_isvalid(od));
+
+	val = readl(reg);
+	if (od == PMUX_PIN_OD_ENABLE)
+		val |= (1 << OD_SHIFT);
+	else
+		val &= ~(1 << OD_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_ioreset(enum pmux_pingrp pin,
+				enum pmux_pin_ioreset ioreset)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+		return;
+
+	/* Error check on pin and ioreset */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_ioreset_isvalid(ioreset));
+
+	val = readl(reg);
+	if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+		val |= (1 << IO_RESET_SHIFT);
+	else
+		val &= ~(1 << IO_RESET_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+#ifdef TEGRA_PMX_HAS_RCV_SEL
+static void pinmux_set_rcv_sel(enum pmux_pingrp pin,
+				enum pmux_pin_rcv_sel rcv_sel)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT)
+		return;
+
+	/* Error check on pin and rcv_sel */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_rcv_sel_isvalid(rcv_sel));
+
+	val = readl(reg);
+	if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH)
+		val |= (1 << RCV_SEL_SHIFT);
+	else
+		val &= ~(1 << RCV_SEL_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif /* TEGRA_PMX_HAS_RCV_SEL */
+#endif /* TEGRA_PMX_HAS_PIN_IO_BIT_ETC */
+
+static void pinmux_config_pingrp(const struct pmux_pingrp_config *config)
+{
+	enum pmux_pingrp pin = config->pingrp;
+
+	pinmux_set_func(pin, config->func);
+	pinmux_set_pullupdown(pin, config->pull);
+	pinmux_set_tristate(pin, config->tristate);
+#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+	pinmux_set_io(pin, config->io);
+	pinmux_set_lock(pin, config->lock);
+	pinmux_set_od(pin, config->od);
+	pinmux_set_ioreset(pin, config->ioreset);
+#ifdef TEGRA_PMX_HAS_RCV_SEL
+	pinmux_set_rcv_sel(pin, config->rcv_sel);
+#endif
+#endif
+}
+
+void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
+				int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_pingrp(&config[i]);
+}
+
+#ifdef TEGRA_PMX_HAS_DRVGRPS
+
+#define pmux_drvgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PMUX_DRVGRP_COUNT))
+
+#define pmux_slw_isvalid(slw) \
+	(((slw) >= PMUX_SLWF_MIN) && ((slw) <= PMUX_SLWF_MAX))
+
+#define pmux_drv_isvalid(drv) \
+	(((drv) >= PMUX_DRVUP_MIN) && ((drv) <= PMUX_DRVUP_MAX))
+
+#define pmux_lpmd_isvalid(lpm) \
+	(((lpm) >= PMUX_LPMD_X8) && ((lpm) <= PMUX_LPMD_X))
+
+#define pmux_schmt_isvalid(schmt) \
+	(((schmt) >= PMUX_SCHMT_DISABLE) && ((schmt) <= PMUX_SCHMT_ENABLE))
+
+#define pmux_hsm_isvalid(hsm) \
+	(((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE))
+
+#define HSM_SHIFT	2
+#define SCHMT_SHIFT	3
+#define LPMD_SHIFT	4
+#define LPMD_MASK	(3 << LPMD_SHIFT)
+#define DRVDN_SHIFT	12
+#define DRVDN_MASK	(0x7F << DRVDN_SHIFT)
+#define DRVUP_SHIFT	20
+#define DRVUP_MASK	(0x7F << DRVUP_SHIFT)
+#define SLWR_SHIFT	28
+#define SLWR_MASK	(3 << SLWR_SHIFT)
+#define SLWF_SHIFT	30
+#define SLWF_MASK	(3 << SLWF_SHIFT)
+
+static void pinmux_set_drvup_slwf(enum pmux_drvgrp grp, int slwf)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwf == PMUX_SLWF_NONE)
+		return;
+
+	/* Error check on pad and slwf */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_slw_isvalid(slwf));
+
+	val = readl(reg);
+	val &= ~SLWF_MASK;
+	val |= (slwf << SLWF_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_drvdn_slwr(enum pmux_drvgrp grp, int slwr)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwr == PMUX_SLWR_NONE)
+		return;
+
+	/* Error check on pad and slwr */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_slw_isvalid(slwr));
+
+	val = readl(reg);
+	val &= ~SLWR_MASK;
+	val |= (slwr << SLWR_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_drvup(enum pmux_drvgrp grp, int drvup)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvup == PMUX_DRVUP_NONE)
+		return;
+
+	/* Error check on pad and drvup */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_drv_isvalid(drvup));
+
+	val = readl(reg);
+	val &= ~DRVUP_MASK;
+	val |= (drvup << DRVUP_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_drvdn(enum pmux_drvgrp grp, int drvdn)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvdn == PMUX_DRVDN_NONE)
+		return;
+
+	/* Error check on pad and drvdn */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_drv_isvalid(drvdn));
+
+	val = readl(reg);
+	val &= ~DRVDN_MASK;
+	val |= (drvdn << DRVDN_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_lpmd(enum pmux_drvgrp grp, enum pmux_lpmd lpmd)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (lpmd == PMUX_LPMD_NONE)
+		return;
+
+	/* Error check pad and lpmd value */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_lpmd_isvalid(lpmd));
+
+	val = readl(reg);
+	val &= ~LPMD_MASK;
+	val |= (lpmd << LPMD_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_schmt(enum pmux_drvgrp grp, enum pmux_schmt schmt)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (schmt == PMUX_SCHMT_NONE)
+		return;
+
+	/* Error check pad */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_schmt_isvalid(schmt));
+
+	val = readl(reg);
+	if (schmt == PMUX_SCHMT_ENABLE)
+		val |= (1 << SCHMT_SHIFT);
+	else
+		val &= ~(1 << SCHMT_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_hsm(enum pmux_drvgrp grp, enum pmux_hsm hsm)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (hsm == PMUX_HSM_NONE)
+		return;
+
+	/* Error check pad */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_hsm_isvalid(hsm));
+
+	val = readl(reg);
+	if (hsm == PMUX_HSM_ENABLE)
+		val |= (1 << HSM_SHIFT);
+	else
+		val &= ~(1 << HSM_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_config_drvgrp(const struct pmux_drvgrp_config *config)
+{
+	enum pmux_drvgrp grp = config->drvgrp;
+
+	pinmux_set_drvup_slwf(grp, config->slwf);
+	pinmux_set_drvdn_slwr(grp, config->slwr);
+	pinmux_set_drvup(grp, config->drvup);
+	pinmux_set_drvdn(grp, config->drvdn);
+	pinmux_set_lpmd(grp, config->lpmd);
+	pinmux_set_schmt(grp, config->schmt);
+	pinmux_set_hsm(grp, config->hsm);
+}
+
+void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config,
+				int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_drvgrp(&config[i]);
+}
+#endif /* TEGRA_PMX_HAS_DRVGRPS */

arch/arm/cpu/tegra114-common/funcmux.c

@@ -29,20 +29,24 @@ int funcmux_select(enum periph_id id, int config)
 	case PERIPH_ID_UART4:
 		switch (config) {
 		case FUNCMUX_UART4_GMI:
-			pinmux_set_func(PINGRP_GMI_A16, PMUX_FUNC_UARTD);
-			pinmux_set_func(PINGRP_GMI_A17, PMUX_FUNC_UARTD);
-			pinmux_set_func(PINGRP_GMI_A18, PMUX_FUNC_UARTD);
-			pinmux_set_func(PINGRP_GMI_A19, PMUX_FUNC_UARTD);
-
-			pinmux_set_io(PINGRP_GMI_A16, PMUX_PIN_OUTPUT);
-			pinmux_set_io(PINGRP_GMI_A17, PMUX_PIN_INPUT);
-			pinmux_set_io(PINGRP_GMI_A18, PMUX_PIN_INPUT);
-			pinmux_set_io(PINGRP_GMI_A19, PMUX_PIN_OUTPUT);
-
-			pinmux_tristate_disable(PINGRP_GMI_A16);
-			pinmux_tristate_disable(PINGRP_GMI_A17);
-			pinmux_tristate_disable(PINGRP_GMI_A18);
-			pinmux_tristate_disable(PINGRP_GMI_A19);
+			pinmux_set_func(PMUX_PINGRP_GMI_A16_PJ7,
+					PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_GMI_A17_PB0,
+					PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_GMI_A18_PB1,
+					PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_GMI_A19_PK7,
+					PMUX_FUNC_UARTD);
+
+			pinmux_set_io(PMUX_PINGRP_GMI_A16_PJ7, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PMUX_PINGRP_GMI_A17_PB0, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_GMI_A18_PB1, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_GMI_A19_PK7, PMUX_PIN_OUTPUT);
+
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A16_PJ7);
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A17_PB0);
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A18_PB1);
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A19_PK7);
 			break;
 		}
 		break;

arch/arm/cpu/tegra124-common/funcmux.c

@@ -20,20 +20,20 @@ int funcmux_select(enum periph_id id, int config)
 	case PERIPH_ID_UART4:
 		switch (config) {
 		case FUNCMUX_UART4_GPIO: /* TXD,RXD,CTS,RTS */
-			pinmux_set_func(PINGRP_GPIO_PJ7, PMUX_FUNC_UARTD);
-			pinmux_set_func(PINGRP_GPIO_PB0, PMUX_FUNC_UARTD);
-			pinmux_set_func(PINGRP_GPIO_PB1, PMUX_FUNC_UARTD);
-			pinmux_set_func(PINGRP_GPIO_PK7, PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_PJ7, PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_PB0, PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_PB1, PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_PK7, PMUX_FUNC_UARTD);
 
-			pinmux_set_io(PINGRP_GPIO_PJ7, PMUX_PIN_OUTPUT);
-			pinmux_set_io(PINGRP_GPIO_PB0, PMUX_PIN_INPUT);
-			pinmux_set_io(PINGRP_GPIO_PB1, PMUX_PIN_INPUT);
-			pinmux_set_io(PINGRP_GPIO_PK7, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PMUX_PINGRP_PJ7, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PMUX_PINGRP_PB0, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_PB1, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_PK7, PMUX_PIN_OUTPUT);
 
-			pinmux_tristate_disable(PINGRP_GPIO_PJ7);
-			pinmux_tristate_disable(PINGRP_GPIO_PB0);
-			pinmux_tristate_disable(PINGRP_GPIO_PB1);
-			pinmux_tristate_disable(PINGRP_GPIO_PK7);
+			pinmux_tristate_disable(PMUX_PINGRP_PJ7);
+			pinmux_tristate_disable(PMUX_PINGRP_PB0);
+			pinmux_tristate_disable(PMUX_PINGRP_PB1);
+			pinmux_tristate_disable(PMUX_PINGRP_PK7);
 			break;
 		}
 		break;
@@ -41,14 +41,16 @@ int funcmux_select(enum periph_id id, int config)
 	case PERIPH_ID_UART1:
 		switch (config) {
 		case FUNCMUX_UART1_KBC:
-			pinmux_set_func(PINGRP_KB_ROW9, PMUX_FUNC_UARTA);
-			pinmux_set_func(PINGRP_KB_ROW10, PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_KB_ROW9_PS1,
+					PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_KB_ROW10_PS2,
+					PMUX_FUNC_UARTA);
 
-			pinmux_set_io(PINGRP_KB_ROW9, PMUX_PIN_OUTPUT);
-			pinmux_set_io(PINGRP_KB_ROW10, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_KB_ROW9_PS1, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PMUX_PINGRP_KB_ROW10_PS2, PMUX_PIN_INPUT);
 
-			pinmux_tristate_disable(PINGRP_KB_ROW9);
-			pinmux_tristate_disable(PINGRP_KB_ROW10);
+			pinmux_tristate_disable(PMUX_PINGRP_KB_ROW9_PS1);
+			pinmux_tristate_disable(PMUX_PINGRP_KB_ROW10_PS2);
 			break;
 		}
 		break;

arch/arm/cpu/tegra20-common/emc.c

@@ -8,7 +8,7 @@
 #include <fdtdec.h>
 #include <asm/io.h>
 #include <asm/arch-tegra/ap.h>
-#include <asm/arch/apb_misc.h>
+#include <asm/arch-tegra/apb_misc.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/emc.h>
 #include <asm/arch/tegra.h>

arch/arm/cpu/tegra20-common/warmboot.c

@@ -15,6 +15,7 @@
 #include <asm/arch/sdram_param.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/apb_misc.h>
 #include <asm/arch-tegra/clk_rst.h>
 #include <asm/arch-tegra/pmc.h>
 #include <asm/arch-tegra/fuse.h>
@@ -122,7 +123,8 @@ int warmboot_save_sdram_params(void)
 {
 	u32 ram_code;
 	struct sdram_params sdram;
-	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	struct apb_misc_pp_ctlr *apb_misc =
+				(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
 	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	struct apb_misc_gp_ctlr *gp =
 			(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
@@ -135,7 +137,7 @@ int warmboot_save_sdram_params(void)
 	union fbio_spare_reg fbio_spare;
 
 	/* get ram code that is used as index to array sdram_params in BCT */
-	ram_code = (readl(&pmt->pmt_strap_opt_a) >>
+	ram_code = (readl(&apb_misc->strapping_opt_a) >>
 			  STRAP_OPT_A_RAM_CODE_SHIFT) & 3;
 	memcpy(&sdram,
 	       (char *)((struct sdram_params *)SDRAM_PARAMS_BASE + ram_code),

board/logicpd/zoom1/config.mk

@@ -14,4 +14,3 @@
 # (mem base + reserved)
 
 # For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000