提交 ae8a5d10 编写于 作者: S Shengzhou Liu 提交者: Andy Fleming

net/fm: fixup ethernet for mEMAC

- set proper compatible property name for mEMAC.
- fixed ft_fixup_port for dual-role mEMAC, which will lead to
  MAC node disabled incorrectly.
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
上级 95927808
......@@ -152,4 +152,6 @@ struct fm_eth {
#define MAX_RXBUF_LOG2 11
#define MAX_RXBUF_LEN (1 << MAX_RXBUF_LOG2)
#define PORT_IS_ENABLED(port) fm_info[fm_port_to_index(port)].enabled
#endif /* __FM_H__ */
......@@ -238,6 +238,26 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
return ;
}
#ifdef CONFIG_SYS_FMAN_V3
/*
* Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when
* FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the
* dual-role MAC is not disabled, ditto for other dual-role MACs.
*/
if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
#if (CONFIG_SYS_NUM_FMAN == 2)
||
((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) ||
((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2))) ||
((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) ||
((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
#endif
)
return;
#endif
/* board code might have caused offset to change */
off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
......@@ -255,10 +275,15 @@ void fdt_fixup_fman_ethernet(void *blob)
{
int i;
#ifdef CONFIG_SYS_FMAN_V3
for (i = 0; i < ARRAY_SIZE(fm_info); i++)
ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
#else
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if (fm_info[i].type == FM_ETH_1G_E)
ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac");
else
ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac");
}
#endif
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册