提交 95390360 编写于 作者: Y York Sun

powerpc: P5040: Remove macro CONFIG_P5040

Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up
existing macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>
上级 3b83649d
......@@ -56,6 +56,7 @@ config TARGET_P5020DS
config TARGET_P5040DS
bool "Support P5040DS"
select PHYS_64BIT
select ARCH_P5040
config TARGET_MPC8536DS
bool "Support MPC8536DS"
......@@ -328,6 +329,9 @@ config ARCH_P4080
config ARCH_P5020
bool
config ARCH_P5040
bool
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
......
......@@ -43,7 +43,7 @@ obj-$(CONFIG_ARCH_P2041) += p2041_ids.o
obj-$(CONFIG_ARCH_P3041) += p3041_ids.o
obj-$(CONFIG_ARCH_P4080) += p4080_ids.o
obj-$(CONFIG_ARCH_P5020) += p5020_ids.o
obj-$(CONFIG_PPC_P5040) += p5040_ids.o
obj-$(CONFIG_ARCH_P5040) += p5040_ids.o
obj-$(CONFIG_PPC_T4240) += t4240_ids.o
obj-$(CONFIG_PPC_T4160) += t4240_ids.o
obj-$(CONFIG_PPC_T4080) += t4240_ids.o
......@@ -85,7 +85,7 @@ obj-$(CONFIG_ARCH_P2041) += p2041_serdes.o
obj-$(CONFIG_ARCH_P3041) += p3041_serdes.o
obj-$(CONFIG_ARCH_P4080) += p4080_serdes.o
obj-$(CONFIG_ARCH_P5020) += p5020_serdes.o
obj-$(CONFIG_PPC_P5040) += p5040_serdes.o
obj-$(CONFIG_ARCH_P5040) += p5040_serdes.o
obj-$(CONFIG_PPC_T4240) += t4240_serdes.o
obj-$(CONFIG_PPC_T4160) += t4240_serdes.o
obj-$(CONFIG_PPC_T4080) += t4240_serdes.o
......
......@@ -491,7 +491,7 @@ void fsl_serdes_init(void)
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int cfg;
serdes_corenet_t *srds_regs;
#ifdef CONFIG_PPC_P5040
#ifdef CONFIG_ARCH_P5040
serdes_corenet_t *srds2_regs;
#endif
int lane, bank, idx;
......@@ -577,7 +577,7 @@ void fsl_serdes_init(void)
}
}
#ifdef CONFIG_PPC_P5040
#ifdef CONFIG_ARCH_P5040
/*
* Lanes on bank 4 on P5040 are commented-out, but for some SERDES
* protocols, these lanes are routed to SATA. We use serdes_prtcl_map
......
......@@ -465,7 +465,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20
#elif defined(CONFIG_PPC_P5040)
#elif defined(CONFIG_ARCH_P5040)
#define CONFIG_SYS_PPC64
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
......
......@@ -61,7 +61,7 @@
#if defined(CONFIG_ARCH_P3041) || \
defined(CONFIG_ARCH_P4080) || \
defined(CONFIG_ARCH_P5020) || \
defined(CONFIG_PPC_P5040) || \
defined(CONFIG_ARCH_P5040) || \
defined(CONFIG_ARCH_P2041)
#define CONFIG_FSL_TRUST_ARCH_v1
#endif
......
......@@ -1866,7 +1866,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000
#endif
#if defined(CONFIG_PPC_P5040)
#if defined(CONFIG_ARCH_P5040)
#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII 0x00000000
#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII 0x00800000
#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE 0x00c00000
......
......@@ -19,7 +19,7 @@
#define FIRST_PORT_ADDR 3
#define SECOND_PORT_ADDR 7
#ifdef CONFIG_PPC_P5040
#ifdef CONFIG_ARCH_P5040
#define FIRST_PORT FM1_DTSEC5
#define SECOND_PORT FM2_DTSEC5
#else
......@@ -83,7 +83,7 @@ int board_eth_init(bd_t *bis)
fm_disable_port(i);
}
#ifdef CONFIG_PPC_P5040
#ifdef CONFIG_ARCH_P5040
for (i = FM2_DTSEC2; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
if (!IS_VALID_PORT(i))
fm_disable_port(i);
......
......@@ -5,7 +5,7 @@ CONFIG_TARGET_CYRUS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5040"
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,ARCH_P5040"
CONFIG_BOOTDELAY=10
CONFIG_CONSOLE_MUX=y
CONFIG_HUSH_PARSER=y
......
......@@ -23,7 +23,7 @@ obj-$(CONFIG_ARCH_P2041) += p5020.o
obj-$(CONFIG_ARCH_P3041) += p5020.o
obj-$(CONFIG_ARCH_P4080) += p4080.o
obj-$(CONFIG_ARCH_P5020) += p5020.o
obj-$(CONFIG_PPC_P5040) += p5040.o
obj-$(CONFIG_ARCH_P5040) += p5040.o
obj-$(CONFIG_PPC_T1040) += t1040.o
obj-$(CONFIG_PPC_T1042) += t1040.o
obj-$(CONFIG_PPC_T1020) += t1040.o
......
......@@ -9,7 +9,6 @@
*
*/
#define CONFIG_P5040DS
#define CONFIG_PPC_P5040
#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
......
......@@ -9,7 +9,7 @@
#define CONFIG_CYRUS
#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_PPC_P5040)
#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
#error Must call Cyrus CONFIG with a specific CPU enabled.
#endif
......@@ -33,7 +33,7 @@
#if defined(CONFIG_ARCH_P5020)
#define CONFIG_SYS_CLK_FREQ 133000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
#elif defined(CONFIG_PPC_P5040)
#elif defined(CONFIG_ARCH_P5040)
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
#endif
......
......@@ -3643,7 +3643,6 @@ CONFIG_PPC64BRIDGE
CONFIG_PPC_B4420
CONFIG_PPC_B4860
CONFIG_PPC_CLUSTER_START
CONFIG_PPC_P5040
CONFIG_PPC_SPINTABLE_COMPATIBLE
CONFIG_PPC_T1023
CONFIG_PPC_T1024
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册