Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 699f0512 编写于 作者: W Wolfgang Denk
浏览文件
操作

Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile 

Signed-off-by: NWolfgang Denk <wd@denx.de>
上级 bcab74ba
隐藏空白更改
内联 并排
Showing with 1228 addition and 122 deletion
CHANGELOG
浏览文件 @ 699f0512
commit bcab74baa6b1b1c969038ab6f64a186239180405
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Tue Jul 15 11:23:02 2008 -0400
Round the serial port clock divisor value returned by calc_divisor()
Round the serial port clock divisor value returned by
calc_divisor()
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
commit 0328ef0edfe950f0b7b8b368dae482531506b74a
Author: Robin Getz <rgetz@blackfin.uclinux.org>
Date: Tue Jul 15 21:44:46 2008 +0200
Fix DHCP protocol so U-Boot does not respond too early
on the network with it's offered IP number; it should not reply until
after it has received a DHCP ACK message. Also ensures that U-Boot
does it's DHCPREQUEST as broadcast (per RFC 2131).
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
Author: Sebastian Siewior <bigeasy@linutronix.de>
Date: Tue Jul 15 13:35:23 2008 +0200
cfi_flash: make the command u32 only
This got changed by commit 93c56f212c
[cfi_flash: support of long cmd in U-boot.]
Long is the wrong type because it will behave differently on 64bit
machines in a way that is probably not expected. u32 should be
enough.
Cc: Alexey Korolev <akorolev@infradead.org>
Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
commit 31cfe57491b183acae575d486729e158f016c27b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Mon Jul 14 23:48:41 2008 +0200
tools/gitignore: update to all generated files
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date: Wed Jul 9 18:30:44 2008 +0200
mpc5xxx: Add MVBC_P board support
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
commit e2d31fb3450653115452144363d5bde4e5e3e693
Author: Timur Tabi <timur@freescale.com>
Date: Thu Jun 19 17:56:11 2008 -0500
Update Freescale sys_eeprom.c to handle CCID formats
Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
NXID format replaces the older CCID format, but it's important to support both
since most boards out there still use the CCID format. This change is in
preparation for using one file to handle both formats. This will also unify
EEPROM support for all Freescale 85xx and 86xx boards.
Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
instead of ID_EEPROM_ADDR.
Signed-off-by: Timur Tabi <timur@freescale.com>
commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri Jul 11 17:22:43 2008 +0900
pci: sh: Add pci_skip_dev and pci_print_dev function
Add function of new PCI, pci_skip_dev and pci_print_dev.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
commit 1107014e835ec9d46c0333f4211d104f77442db0
Author: Andy Fleming <afleming@freescale.com>
Date: Mon Jul 14 20:29:07 2008 -0500
Clean up INIT_RAM options
The L2_INIT_RAM option was unused, and recent changes to the TLB code
meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
the amount of mapped space attached to nothing, we change things so the TLBs
get cleared.
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 4524561820a9327e89107854b3a7187800ccf719
Author: Andy Fleming <afleming@freescale.com>
Date: Mon Jul 14 20:26:57 2008 -0500
Remove fake flash bank from 8544 DS
The fake flash bank was generating errors for anyone who didn't have a
PromJET hooked up to the board. As that constitutes the vast majority of
users, we remove it.
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Mon Jul 14 14:07:03 2008 -0500
MPC8544DS: Add ATI Video card support
Add support for using a PCIe ATI Video card on PCIe2.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Mon Jul 14 14:07:02 2008 -0500
85xx: Add some L1/L2 SPR register definitions
Add new L1/L2 SPRs related to e500mc cache config and control.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit e5852787f0c3c442a276262f13d91ca450605ac0
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Mon Jul 14 14:07:01 2008 -0500
MPC8544DS: Report board id, board version and fpga version.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 73f15a060f67a2462551c334215bd20fac6b81d1
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Mon Jul 14 14:07:00 2008 -0500
85xx: Cleanup L2 cache size detection
The L2 size detection code was a bit confusing and we kept having to add
code to it to handle new processors. Change the sense of detection so we
look for the older processors that aren't changing.
Also added support for 1M cache size on 8572.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit c3ca7e5e00a24451f20df3bded9a61ba541921df
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Jul 11 15:33:08 2008 -0400
sbc8560: enable CONFIG_OF_LIBFDT by default
Make the default build for the sbc8560 board be powerpc
capable with libfdt support.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
Author: Andy Fleming <afleming@freescale.com>
Date: Mon Jul 14 20:04:40 2008 -0500
Fix indentation for default boot environment variables
This was proposed by Paul Gortmaker in response to Wolfgang's comments on
similar #defines in sbc8560.h.
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Jul 11 15:33:07 2008 -0400
sbc8560: add default fdt values
Add in the default fdt settings and the typical EXTRA_ENV
settings as borrowed from the mpc8560ads. Fix a couple
of stale references to the mpc8560ads dating back to the
original clone/fork.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit d04e76edf92f7f89696989e8702b97e020455af3
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Jul 11 15:33:06 2008 -0400
sbc8560: add in ft_board_setup()
Add in for the sbc8560, the ft_board_setup() routine, based on what is
in use for the Freescale MPC8560ADS board.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
commit c158bcaca3b31cbe38c4143812e6170e38a57393
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Jul 11 15:33:05 2008 -0400
sbc8560: define eth0 and eth1 instead of eth1 and eth2
The existing config doesn't define CONFIG_HAS_ETH0, and so the
fdt support doesn't update the zeros in the dtb local-mac with
real data from the u-boot env. Since the existing config is
tailored to just two interfaces, get rid of the ETH2 definitions
at the same time.
Also don't include any end user specific data into the environment
by default -- things like MAC address, network parameters etc. need
to come from the end user.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Jul 11 15:33:04 2008 -0400
sbc8560: properly set cs0_bnds for 512MB
The sbc8560 board ships with 512MB of memory installed,
but the current cs0_bnds is hard coded for 256MB. Set the
value based on CFG_SDRAM_SIZE.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Jul 11 15:33:03 2008 -0400
sbc8560: proper definitions for TSEC.
The definitions for the TSEC have become out of date. There is no
longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
Update to match those of other boards, like the MPC8560ADS.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
commit 71074abbe0c76429577aff58aeff0a24ad210b23
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Wed Jul 9 13:23:05 2008 -0400
8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
Some boards that have external 16550 UARTs don't have a direct
tie between bi_busfreq and the clock used for the UARTs. Boards
that do have such a tie should set CFG_NS16550_CLK to be
get_bus_freq(0) -- which most of them do already.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
commit 24ef76f320fbadf074105229826514db140f939f
Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Date: Wed Jul 2 07:03:53 2008 -0700
Change the temp map to ROM to align addresses to page size.
With a page size of BOOKE_PAGESZ_16M, both the real and effective
addresses must be multiples of 16MB. The hardware silently truncates
them so the code happens to work. This patch clarifies the situation
by establishing addresses that the hardware doesn't need to truncate.
Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 06b4186c10204b6683edb047ac5f506fb0ce0937
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Tue Jun 17 17:45:22 2008 -0500
mpc85xx: use IS_E_PROCESSOR macro
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Mon Jun 16 15:55:53 2008 -0500
fdt: add crypto node handling for MPC8{3, 5}xxE processors
Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
check rev and up-rev crypto node (to SEC rev. 2.4 property values)
if on an 'EA' processor, e.g. MPC8349EA.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Fri Jul 11 15:10:11 2008 -0400
ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
ARM DaVinci: Remove extern phy_t declaration by moving
code to proper place.
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Fri Jul 11 15:10:10 2008 -0400
ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
ARM DaVinci: Remove duplicate definitions of MACH_TYPE
and prototype of i2c_init().
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Mon Jul 14 14:03:02 2008 -0500
Fix some more printf() format problems.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 45b16d22c64674ccd8c4637456a987463609141c
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 22:38:42 2008 +0200
Fix coding style; make code better parsable by external tools
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit b880cbf207b1c109d3a661417a8feddcbd729a9d
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 21:19:08 2008 +0200
cpu/i386/serial.c: Fix syntax errors
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 20:41:35 2008 +0200
elppc board: Coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 20:40:22 2008 +0200
elppc board: fix syntax error.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 20:38:26 2008 +0200
EB+MCF-EV123 board: fix coding style (alingment)
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 6841785a0bb0f38175456a923edd634fb7dd6947
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 20:36:44 2008 +0200
EB+MCF-EV123 board: fix syntx error
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
Author: Andy Fleming <afleming@freescale.com>
Date: Mon Jul 7 18:02:08 2008 -0500
Remove LBC_CACHE_BASE from 8544 DS
The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
space for some anyway, we were allowing speculative loads into unmapped space,
which would cause an exception (annoying, even if ultimately harmless).
Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
problem.
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 15:19:07 2008 +0200
Code cleanup: fix old style assignment ambiguities like "=-" etc.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit d7854223c5c85b5849fbf422cc8ac0efef461c37
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 15:10:53 2008 +0200
AmigaOneG3SE: remove dead and incomplete files
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit b64f190b7a34224df09b559ca111eb1b733f00ad
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 14 15:06:35 2008 +0200
Fix printf() format issues with sizeof_t types by using %zu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit f354b73e16a86f9e9085471a830605f74f84ea5d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Mon Jul 14 14:11:45 2008 +0200
vsprintf: add z and t options
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Jul 13 23:07:35 2008 +0200
Fix some more printf() format issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit d5996dd555edf52721b7691a4c59de016251ed39
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Jul 13 19:51:00 2008 +0200
Fix some more printf() format problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 0f9d5f6d6e814907794995c6a22af752040c35d9
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Jul 13 19:48:26 2008 +0200
ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
Author: Anatolij Gustschin <agust@denx.de>
Date: Sat Jul 12 17:31:36 2008 +0200
Fix bug in Lime video driver
We need to wait while drawing engine clears frame
buffer before any further software accesses to frame
buffer will be initiated. Otherwise software drawn
parts could be partially destroyed by the drawing
engine or even GDC chip freeze could occur (as
observed on socrates board).
Signed-off-by: Anatolij Gustschin <agust@denx.de>
commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Jul 12 14:36:34 2008 +0200
Fix some more printf() format issues.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit 18c8a28aad49803780bd8d52432ded528e37e701
Author: Michal Simek <monstr@monstr.eu>
Date: Fri Jul 11 15:11:57 2008 +0200
hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
Author: Michal Simek <monstr@monstr.eu>
Date: Fri Jul 11 11:50:53 2008 +0200
hwmon: Cleaning hwmon devices
Clean Makefile
Move device specific values to driver for better reading
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
commit c78fce699c7ff467ecd841da6a79f065180bf578
Author: Michal Simek <monstr@monstr.eu>
Date: Fri Jul 11 10:43:13 2008 +0200
FIS: repare incorrect return value with ramdisk handling
Microblaze and PowerPC use boot_get_ramdisk for loading
ramdisk to memory with checking return value.
Return 0 means success. Return 1 means failed.
Here is correspond part of code from bootm.c which check
return code.
ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
&rd_data_start, &rd_data_end);
if (ret)
goto error;
Signed-off-by: Michal Simek <monstr@monstr.eu>
commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
Author: Michal Simek <monstr@monstr.eu>
Date: Fri Jul 11 10:10:32 2008 +0200
microblaze: Remove useless ancient headers
Signed-off-by: Michal Simek <monstr@monstr.eu>
commit 53ea981c3124b13c137c2d10e975b7c6672266e0
Author: Michal Simek <monstr@monstr.eu>
Date: Fri Jul 11 10:10:31 2008 +0200
microblaze: Clean uartlite driver
Redesign uartlite driver to in_be32 and out_be32 macros
Fix missing header in io.h
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
commit dbf3dfb386a2d5d2381814e39985ab2e21894550
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date: Fri Jul 11 02:39:14 2008 +0200
Enable passing of ATAGs required by latest Linux kernel.
commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Fri Jul 11 10:24:15 2008 -0400
Fix integer overflow warning in calc_divisor()
which happened when rounding the serial port clock divisor
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
commit 6b760189d77f001684e3160b355c185ca3804961
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date: Fri Jul 11 01:09:59 2008 +0200
Fix build time warnings in function mmc_decode_csd()
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
commit c15947d6ce0d59925c97fdfac692476af6e262d0
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Thu Jul 10 10:46:33 2008 -0400
ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
caused by missing dcache status/enable/disable functions.
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
Author: Stefan Roese <sr@denx.de>
Date: Thu Jul 10 13:53:31 2008 +0200
ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
This patch removes some ft_board_setup() functions from some 4xx boards.
This can be done since we now have a default weak implementation for this
in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
implementation like canyonlands need their own version.
Signed-off-by: Stefan Roese <sr@denx.de>
commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Jul 13 14:58:16 2008 +0200
Add last known maintainer for orphaned boards; reformat.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Thu Jul 10 13:16:04 2008 +0200
Remove kharris@nexus-tech.net from MAINTAINERS
Mail to kharris@nexus-tech.net bounces because the user doesn't exist
anymore. You can't be a maintainer without a valid e-mail address, so
move all boards that used to be maintained by Kyle Harris to the
"orphaned" list.
Currently, only PowerPC has a list of orphaned boards, so this patch
creates one for ARM as well.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
commit 17bd17071463b0cde391ac4a0863d600474b4ea1
Author: Anatolij Gustschin <agust@denx.de>
Date: Thu Jul 10 01:15:10 2008 +0200
at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
On the at91sam9260ep development board there is an EEPROM
connected to the TWI interface (PA23, PA24 Peripheral A
multiplexing), so we cannot use these pins as ETX2, ETX3.
This patch configures PA10, PA11 pins for ETX2, ETX3
instead of PA23, PA24 pins.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
commit f889265753ddf4465d9d580827bb9289bfac55d6
Author: Kenneth Johansson <kenneth@southpole.se>
Date: Sat Jul 12 13:18:34 2008 -0600
fix DIU for small screens
The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
so it was not possible to set a slow pixel clock and thus prevented
display on small screens.
Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
Acked-by: John Rigby <jrigby@freescale.com>
commit b60b8573875e650e4c69be667bfc88d3ed474a7c
Author: John Rigby <jrigby@freescale.com>
Date: Fri Jul 11 14:44:09 2008 -0600
ADS5121 cleanup compile warnings
board/ads5121/iopin.c
Replace bit fields in struct iopin_t with a single
field and intialize it via plain old macros.
This fixes the type pun warnings and makes the code
more readable.
board/ads5121/ads5121.c
Add include iopin.h to ads5121.c for the iopin_initialize
prototype.
Add an extern void ads5121_diu_init(void)
Signed-off-by: John Rigby <jrigby@freescale.com>
commit bde63587622c4b830a27d1ddf7265843de9e994f
Author: Wolfgang Denk <wd@denx.de>
Date: Fri Jul 11 22:56:11 2008 +0200
Fix some more printf() format issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
Author: Wolfgang Denk <wd@denx.de>
Date: Fri Jul 11 22:55:31 2008 +0200
Fixed some out-of-tree build issues
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jul 9 16:20:23 2008 -0500
ColdFire: Fix FB CS not setup properly for Mcf5282
Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
CFG_CSn_RO is defined as 0, the chipselect will not
be assigned.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jul 9 15:47:27 2008 -0500
ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
clock module in cpu/<cf arch>/cpu_init.c
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit f94945b517f10e01927101679c62361e03d4e837
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jul 9 15:25:01 2008 -0500
ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jul 9 15:21:44 2008 -0500
Fix compile error caused by missing timer function
Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit c37ea031175b807c54e6bad9b270e9bede6c0078
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jul 9 15:14:25 2008 -0500
Fix compile error caused by incorrect function return type
Rename int mii_init(void) to void mii_init(void)
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jun 18 19:27:23 2008 -0500
ColdFire: Fix power up issue for MCF5235
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jun 18 19:19:07 2008 -0500
ColdFire: Fix compiling error for MCF5275
The compiling error was caused by missing a closed parentheses
in speed.c
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jun 18 19:14:01 2008 -0500
ColdFire: Fix timer issue for MCF5272
The timer was assigned to wrong timer memory mapped which
caused udelay() and timer() not working properly.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jun 18 19:12:13 2008 -0500
ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
commit 8371dc2066136be21e10b7b9293e469297d77298
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jun 18 19:05:23 2008 -0500
ColdFire: Add -got=single param for new linux v4e toolchains
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Wed Jun 18 13:21:19 2008 -0500
ColdFire: Fix code flash configuration for M547x/M548x boards
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
commit 6e37091afc07fdcc15590093fd066b0cb7399f85
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Tue Jun 24 12:12:16 2008 -0500
ColdFire: Fix warning messages by passing correct data type in board.c
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
commit 81cc32322acb1b3225ee45606ced48e2a14824dc
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Date: Thu May 29 12:21:54 2008 -0500
ColdFire: Fix UART baudrate formula
The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
can generate the wrong divisor due to integer division truncation.
Round the calculated divisor value by adding 1/2 the baudrate
before dividing by the baudrate.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
commit b578fb471444cbd7db1285701ba51343baaf73fb
Author: Stefan Roese <sr@denx.de>
Date: Thu Jul 10 11:38:26 2008 +0200
ppc4xx: Fix include sequence in 4xx_pcie.c
This patch now moves common.h to the top of the inlcude list. This
is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
the phys_size_t/phys_addr_t are defined to the correct size in this
driver.
Signed-off-by: Stefan Roese <sr@denx.de>
commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
Author: Wolfgang Denk <wd@denx.de>
Date: Fri Jul 11 01:16:00 2008 +0200
Fix some more print() format errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit fdd70d1921b87287d9a99d1be99bc35226c2b412
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Thu Jul 10 20:57:54 2008 +0200
MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
Author: Sergey Lapin <slapin@ossfans.org>
Date: Thu Jun 5 11:06:29 2008 +0400
DataFlash AT45DB021 support
Some boards based on AT91SAM926X-EK use smaller DF chips to keep
bootstrap, u-boot and its environment, using NAND or other external
storage for kernel and rootfs. This patch adds support for
small 1024x263 chip.
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Thu Jul 10 14:00:15 2008 -0500
silence misc printf formatting compiler warnings
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
Author: Markus Klotzbücher <mk@denx.de>
Date: Thu Jul 10 14:47:09 2008 +0200
USB: shutdown USB before booting
This patch fixes a potentially serious issue related to USB which was
discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
ARM920T. Martin wrote:
Turn off USB to prevent the host controller from writing to the
SDRAM while Linux is booting. This could happen, because the HCCA
(Host Controller Communication Area) lies within the SDRAM and the
host controller writes continously to this area (as busmaster!), for
example to increase the HccaFrameNumber variable, which happens
every 1 ms.
This is a slightly modified version of the patch in order to shutdown
USB when booting on all architectures.
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
Author: Martha Marx <mmarx@silicontkx.com>
Date: Thu May 29 14:23:25 2008 -0400
Configuration changes for ADS5121 Rev 3
ADS5121 Rev 3 board is now the default config
config targets are now
ads5121_config
Rev 3 board with
PCI
M41T62 on board RTC
512MB DRAM
ads5121_rev2_config
Rev 2 board with
No PCI
256MB DRAM
Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Rigby <jrigby@freescale.com>
commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
Author: Martha Marx <mmarx@silicontkx.com>
Date: Thu May 29 15:37:21 2008 -0400
Consolidate ADS5121 IO Pin configuration
Consolidate ADS5121 IO Pin configuration to one file
board/ads5121/iopin.c.
Remove pin config from cpu/mpc512x/fec.c
Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Rigby <jrigby@freescale.com>
commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
Author: Christian Eggers <christian@p2400.wgnetz.xx>
Date: Fri Jun 27 19:46:51 2008 +0200
Fix "usb part" command
Only print partition for selected device if user supplied the <dev>
arg with the "usb part [dev]" command.
Signed-off-by: Christian Eggers <ceggers@gmx.de>
Acked-by: Markus Klotzbuecher <mk@denx.de>
commit cc83b27217f7380041fea386ddb6d6d9b261617d
Author: Harald Welte <laforge@gnumonks.org>
Date: Mon Jul 7 00:58:05 2008 +0800
fix USB devices with multiple configurations
This patch fixes bugs in usbdcore*.c related to the use of devices
with multiple configurations.
The original code made mistakes about the meaning of configuration value and
configuration index, and the resulting off-by-one errors resulted in:
* SET_CONFIGURATION always selected the first configuration, no matter what
wValue is being passed.
* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
configuration (index 0).
Signed-off-by: Harald Welte <laforge@openmoko.org>
Acked-by: Markus Klotzbuecher <mk@denx.de>
commit 06c53beae1a726e707971c555613f09b270a2461
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Jul 10 13:16:09 2008 +0200
Fix some more print() format errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
Author: Christian Eggers <christian@p2400.wgnetz.xx>
Date: Fri Jun 27 19:46:51 2008 +0200
Fix "usb part" command
Only print partition for selected device if user supplied the <dev>
arg with the "usb part [dev]" command.
Signed-off-by: Christian Eggers <ceggers@gmx.de>
Acked-by: Markus Klotzbuecher <mk@denx.de>
commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
Author: Harald Welte <laforge@gnumonks.org>
Date: Mon Jul 7 00:58:05 2008 +0800
fix USB devices with multiple configurations
This patch fixes bugs in usbdcore*.c related to the use of devices
with multiple configurations.
The original code made mistakes about the meaning of configuration value and
configuration index, and the resulting off-by-one errors resulted in:
* SET_CONFIGURATION always selected the first configuration, no matter what
wValue is being passed.
* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
configuration (index 0).
Signed-off-by: Harald Welte <laforge@openmoko.org>
Acked-by: Markus Klotzbuecher <mk@denx.de>
commit e870690bdca154943ecadd5212d2d59c1b9d391b
Author: Stefan Roese <sr@denx.de>
Date: Thu Jul 10 10:10:54 2008 +0200
MTD/NAND: Fix printf format warning in nand code
This patch fixes NAND related printf format warning. Those warnings are
now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.
Signed-off-by: Stefan Roese <sr@denx.de>
commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
Author: Stefan Roese <sr@denx.de>
Date: Thu Jul 10 10:00:45 2008 +0200
rtc: Fix printf format warning in m41t60.c
Signed-off-by: Stefan Roese <sr@denx.de>
commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
Author: Stefan Roese <sr@denx.de>
Date: Tue Jul 8 12:01:47 2008 +0200
pci: Move PCI device configuration check into a separate weak function
This patch moves the check, if a device should be skipped in PCI PNP
configuration into the function pci_skip_dev(). This function is defined
as weak so that it can be overwritten by a platform specific one if
needed. The check if the device should get printed in the PCI summary upon
bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
pci_print_dev() which is also defined as weak too.
Signed-off-by: Stefan Roese <sr@denx.de>
commit b002144e1dc21374b1ef5281fe6b5d014af96650
Author: Stefan Roese <sr@denx.de>
Date: Thu Jul 10 09:58:06 2008 +0200
ppc4xx: Fix printf format warnings now visible with the updated format check
This patch fixes ppc4xx related printf format warning. Those warnings are
now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.
Signed-off-by: Stefan Roese <sr@denx.de>
commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
Author: Stefan Roese <sr@denx.de>
Date: Wed Jul 9 17:33:57 2008 +0200
ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
To support such configurations, we "only" map the first 2GB via the TLB's. We
need some free virtual address space for the remaining peripherals like, SoC
devices, FLASH etc.
Note that ECC is currently not supported on configurations with more than 2GB
SDRAM. This is because we only map the first 2GB on such systems, and therefore
the ECC parity byte of the remaining area can't be written.
Signed-off-by: Stefan Roese <sr@denx.de>
commit cf1c2ed91df26903b956948f37f82de9e1158a89
Author: Larry Johnson <lrj@acm.org>
Date: Sat Jun 14 17:02:49 2008 -0400
ppc4xx: Remove implementation of testdram() from Korat board support
Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>
commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
Author: Larry Johnson <lrj@acm.org>
Date: Sat Jun 14 16:53:02 2008 -0400
ppc4xx: Update and add FDT to Korat board support
Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>
commit 4188f0491886b3b486164e819c0a83fdb97efd7d
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Jul 10 01:13:30 2008 +0200
Minor coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 8915f1189c1d29d8be7f4de325702d90a8988219
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Wed Jul 9 17:50:45 2008 -0400
......@@ -285,6 +1351,19 @@ Date: Tue Jul 8 12:03:24 2008 +0900
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
Author: Jason Jin <Jason.jin@freescale.com>
Date: Tue May 13 11:50:36 2008 +0800
Feed the watchdog in u-boot for 8610 board.
The watchdog on 8610 board is enabled by setting sw[6]
to on. Once enabled, the watchdog can not be disabled
by software. So feed the dog in u-boot is necessary for
normal operation.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Wed Jun 18 12:10:33 2008 -0400
......@@ -748,6 +1827,18 @@ Date: Sun Jun 8 17:59:53 2008 +0200
Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
Acked-by: Felix Radensky <felix@embedded-sol.com>
commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
Author: Stefan Roese <sr@denx.de>
Date: Tue Jul 1 17:03:19 2008 +0200
ppc4xx: Fix 460EX/GT PCIe port initialization
This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
this out.
Signed-off-by: Stefan Roese <sr@denx.de>
commit b571afde0295b007a45055ee49f8822c753a5651
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Jun 7 12:29:52 2008 +0200
......@@ -1129,6 +2220,22 @@ Date: Thu Jun 12 12:40:11 2008 +0200
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
commit a036b0443657fe0f4773786de9092251869f08ac
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Thu Jun 19 01:45:50 2008 -0500
MPC8610HPCD: Report board id, board version and fpga version.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Thu Jun 19 01:45:27 2008 -0500
MPC8641HPCN: Report board id, board version and fpga version.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
Author: Stefan Roese <sr@denx.de>
Date: Mon Jun 16 10:40:02 2008 +0200
Makefile
浏览文件 @ 699f0512
......@@ -23,8 +23,8 @@
VERSION = 1
PATCHLEVEL = 3
SUBLEVEL = 3
EXTRAVERSION =
SUBLEVEL = 4
EXTRAVERSION = -rc1
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
......@@ -493,6 +493,9 @@ aev_config: unconfig
BC3450_config: unconfig
@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
cm5200_config: unconfig
@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
......@@ -540,9 +543,6 @@ icecube_5100_config: unconfig
jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
v38b_config: unconfig
@$(MKCONFIG) -a v38b ppc mpc5xxx v38b
inka4x0_config: unconfig
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
......@@ -617,9 +617,20 @@ prs200_highboot_DDR_config: unconfig
mecp5200_config: unconfig
@$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
munices_config: unconfig
@$(MKCONFIG) munices ppc mpc5xxx munices
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mvbc_p
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
{ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
@$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
o2dnt_config: unconfig
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
......@@ -644,9 +655,6 @@ PM520_ROMBOOT_DDR_config: unconfig
smmaco4_config: unconfig
@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
cm5200_config: unconfig
@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
spieval_config: unconfig
@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
......@@ -740,22 +748,17 @@ TQM5200_STK100_config: unconfig
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mvbc_p
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
{ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
@$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
v38b_config: unconfig
@$(MKCONFIG) -a v38b ppc mpc5xxx v38b
#########################################################################
## MPC512x Systems
#########################################################################
ads5121_config \
ads5121_rev2_config \
: unconfig
......@@ -1226,6 +1229,9 @@ CATcenter_33_config: unconfig
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
CMS700_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
CPCI2DP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
......@@ -1407,6 +1413,9 @@ quad100hd_config: unconfig
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
sc3_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
......@@ -1425,9 +1434,6 @@ rainier_nand_config: unconfig
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
sc3_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
taihu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
......@@ -1440,9 +1446,6 @@ VOH405_config: unconfig
VOM405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
CMS700_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
W7OLMC_config \
W7OLMG_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
......@@ -1867,9 +1870,6 @@ M5275EVB_config : unconfig
M5282EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
TASREG_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
......@@ -1989,6 +1989,9 @@ M5485HFE_config : unconfig
fi
@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
TASREG_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
#########################################################################
## MPC83xx Systems
#########################################################################
......@@ -2312,12 +2315,12 @@ PCIPPC2_config \
PCIPPC6_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
ZUMA_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
ppmc7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
ZUMA_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
#========================================================================
# ARM
#========================================================================
......@@ -2369,12 +2372,12 @@ csb637_config : unconfig
kb9202_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
mp2usb_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
m501sk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
mp2usb_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
#########################################################################
## Atmel ARM926EJ-S Systems
#########################################################################
......@@ -2411,6 +2414,18 @@ cp922_XA10_config \
cp1026_config: unconfig
@board/integratorcp/split_by_variant.sh $@
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
davinci_schmoogie_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
davinci_sffsdr_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
lpd7a400_config \
lpd7a404_config: unconfig
@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
......@@ -2427,21 +2442,6 @@ netstar_config: unconfig
omap1510inn_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
omap5912osk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
davinci_schmoogie_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
davinci_sffsdr_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
......@@ -2465,6 +2465,9 @@ omap1610h2_cs_autoboot_config: unconfig
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
omap5912osk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
omap730p2_config \
......@@ -2526,9 +2529,16 @@ trab_old_config: unconfig
VCMA9_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
#========================================================================
#########################################################################
# ARM supplied Versatile development boards
#========================================================================
#########################################################################
cm4008_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
cm41xx_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
versatile_config \
versatileab_config \
versatilepb_config : unconfig
......@@ -2537,12 +2547,6 @@ versatilepb_config : unconfig
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
cm4008_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
cm41xx_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
#########################################################################
## S3C44B0 Systems
#########################################################################
......@@ -2657,8 +2661,6 @@ zylonite_config :
#########################################################################
## ARM1136 Systems
#########################################################################
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
apollon_config : unconfig
@mkdir -p $(obj)include
......@@ -2675,6 +2677,9 @@ imx31_phycore_config : unconfig
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
#========================================================================
# i386
#========================================================================
......@@ -2724,6 +2729,7 @@ tb0229_config: unconfig
#########################################################################
## MIPS32 AU1X00
#########################################################################
dbau1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
......@@ -2749,17 +2755,17 @@ dbau1550_el_config : unconfig
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
gth2_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
@$(MKCONFIG) -a gth2 mips mips gth2
pb1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
gth2_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
@$(MKCONFIG) -a gth2 mips mips gth2
qemu_mips_config: unconfig
qemu_mips_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
......@@ -2778,6 +2784,24 @@ purple_config : unconfig
## Nios32
#########################################################################
ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
$(XECHO) "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
DK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig
......@@ -2819,24 +2843,6 @@ DK1S10_config: unconfig
}
@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
$(XECHO) "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
#########################################################################
## Nios-II
#########################################################################
......@@ -2857,21 +2863,19 @@ PCI5441_config : unconfig
@$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
# MicroBlaze
#========================================================================
#########################################################################
## Microblaze
#########################################################################
suzaku_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
#========================================================================
ml401_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ML401 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
suzaku_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
xupv2p_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
......@@ -2894,9 +2898,9 @@ $(BFIN_BOARDS):
#========================================================================
# AVR32
#========================================================================
#########################################################################
## AT32AP70xx
#########################################################################
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
atstk1002_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
......@@ -2910,16 +2914,14 @@ atstk1004_config : unconfig
atstk1006_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
#########################################################################
#########################################################################
#########################################################################
#========================================================================
# SH3 (SuperH)
#========================================================================
#########################################################################
## sh3 (Renesas SuperH)
#########################################################################
mpr2_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
......@@ -2933,6 +2935,12 @@ ms7720se_config: unconfig
#########################################################################
## sh4 (Renesas SuperH)
#########################################################################
MigoR_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
@./mkconfig -a $(@:_config=) sh sh4 MigoR
ms7750se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
......@@ -2943,21 +2951,16 @@ ms7722se_config : unconfig
@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
MigoR_config : unconfig
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
@./mkconfig -a $(@:_config=) sh sh4 MigoR
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
@./mkconfig -a $(@:_config=) sh sh4 r2dplus
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
@./mkconfig -a $(@:_config=) sh sh4 r7780mp
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
@./mkconfig -a $(@:_config=) sh sh4 r2dplus
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
......@@ -2966,6 +2969,7 @@ sh7763rdp_config : unconfig
#========================================================================
# SPARC
#========================================================================
#########################################################################
## LEON3
#########################################################################
......
board/ads5121/README
浏览文件 @ 699f0512
......@@ -5,5 +5,3 @@ ability and set the correct frequency and memory configuration.
To configure for the older Rev 2 ADS5121 type (this will not have PCI)
make ads5121_rev2_config
board/freescale/common/sys_eeprom.c
浏览文件 @ 699f0512
......@@ -465,6 +465,4 @@ unsigned int get_cpu_board_revision(void)
return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
}
#endif
common/cmd_bootm.c
浏览文件 @ 699f0512
......@@ -218,15 +218,15 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
iflag = disable_interrupts();
#if (CONFIG_COMMANDS & CFG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
......
doc/README.mvbc_p
浏览文件 @ 699f0512
......@@ -11,7 +11,7 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P)
2 System Components
2.1 CPU
2.1 CPU
Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB.
64MB SDRAM @ 133MHz.
8 MByte Nor Flash on local bus.
......@@ -20,7 +20,7 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P)
2.2 PCI
PCI clock fixed at 66MHz. Arbitration inside FPGA.
Intel GD82541ER network MAC/PHY and FPGA connected.
2.3 FPGA
Altera Cyclone-II EP2C8 with PCI DMA engine.
Connects to Matrix Vision specific CCD/CMOS sensor interface.
......@@ -71,4 +71,3 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P)
2. Initrd - name is stored in "initrd_name"
3. device tree blob - name is stored in "dtb_name"
Fallback files are the flash versions.
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或