diff --git a/Kconfig b/Kconfig index a02168690f5b19e060ccfe9b3e7751b38bd71fe4..9d83d1a22c8c0292e6c95ead412529c49419dd1a 100644 --- a/Kconfig +++ b/Kconfig @@ -138,6 +138,8 @@ config SYS_MALLOC_F_LEN depends on SYS_MALLOC_F default 0x1000 if AM33XX default 0x2800 if SANDBOX + default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ + ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5) default 0x400 help Before relocation, memory is very limited on many platforms. Still, diff --git a/MAINTAINERS b/MAINTAINERS index 36625795a48a4769ef0c675bbfc4e7ab5ab5f6f1..190050c99cd0562e810940f49f9336ac6f85a420 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -157,6 +157,7 @@ T: git git://git.denx.de/u-boot-imx.git F: arch/arm/cpu/arm1136/mx*/ F: arch/arm/cpu/arm926ejs/mx*/ F: arch/arm/cpu/armv7/vf610/ +F: arch/arm/dts/*imx* F: arch/arm/mach-imx/ F: arch/arm/include/asm/arch-imx/ F: arch/arm/include/asm/arch-mx*/ diff --git a/Makefile b/Makefile index 09d6c3a067dd9fddc52833ee8f46201be70b24bf..c55ffa265ffae45223efafb7fd756ae1b41fb133 100644 --- a/Makefile +++ b/Makefile @@ -1087,6 +1087,10 @@ endif u-boot.bin: u-boot-fit-dtb.bin FORCE $(call if_changed,copy) + +u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE + $(call if_changed,cat) + else ifeq ($(CONFIG_OF_SEPARATE),y) u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE $(call if_changed,cat) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e0c54bfa767e475c12fea7d547d366d62d4ed633..3d319663800a43eba5086b89418dcdb96c0f26da 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -540,7 +540,8 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \ dtb-$(CONFIG_MX6Q) += \ imx6-apalis.dtb \ imx6q-display5.dtb \ - imx6q-logicpd.dtb + imx6q-logicpd.dtb \ + imx6q-novena.dtb dtb-$(CONFIG_TARGET_TBS2910) += \ imx6q-tbs2910.dtb @@ -570,7 +571,8 @@ dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb dtb-$(CONFIG_MX6SX) += \ imx6sx-sabreauto.dtb \ - imx6sx-sdb.dtb + imx6sx-sdb.dtb \ + imx6sx-softing-vining-2000.dtb dtb-$(CONFIG_MX6UL) += \ imx6ul-geam.dtb \ @@ -588,10 +590,13 @@ dtb-$(CONFIG_MX6UL) += \ dtb-$(CONFIG_MX6ULL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri.dtb \ + imx6ull-phycore-segin.dtb \ imx6ull-dart-6ul.dtb dtb-$(CONFIG_ARCH_MX6) += \ - imx6-colibri.dtb + imx6-apalis.dtb \ + imx6-colibri.dtb \ + imx6q-dhcom-pdk2.dtb dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7d-sdb-qspi.dtb \ @@ -605,8 +610,10 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb dtb-$(CONFIG_ARCH_IMX8) += \ - fsl-imx8qxp-mek.dtb \ + fsl-imx8qm-apalis.dtb \ fsl-imx8qm-mek.dtb \ + fsl-imx8qxp-colibri.dtb \ + fsl-imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_IMX8M) += fsl-imx8mq-evk.dtb diff --git a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..7b1a9550e4c67069e4baf7882402c4bf6fdd683c --- /dev/null +++ b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2019 Toradex AG + */ + +&mu { + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pd_lsio { + u-boot,dm-spl; +}; + +&pd_lsio_gpio0 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio1 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio2 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio3 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio4 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio5 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio6 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio7 { + u-boot,dm-spl; +}; + +&pd_conn { + u-boot,dm-spl; +}; + +&pd_conn_sdch0 { + u-boot,dm-spl; +}; + +&pd_conn_sdch1 { + u-boot,dm-spl; +}; + +&pd_conn_sdch2 { + u-boot,dm-spl; +}; + +&gpio0 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&gpio6 { + u-boot,dm-spl; +}; + +&gpio7 { + u-boot,dm-spl; +}; + +&lpuart0 { + u-boot,dm-spl; +}; + +&lpuart1 { + u-boot,dm-spl; +}; + +&lpuart2 { + u-boot,dm-spl; +}; + +&lpuart3 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&usdhc3 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/fsl-imx8qm-apalis.dts b/arch/arm/dts/fsl-imx8qm-apalis.dts new file mode 100644 index 0000000000000000000000000000000000000000..9b1f8aa32d08791aa497371bd2b7d8ed6d0b43f0 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qm-apalis.dts @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2017-2019 Toradex + */ + +/dts-v1/; + +/* First 128KB is for PSCI ATF. */ +/memreserve/ 0x80000000 0x00020000; + +#include "fsl-imx8qm.dtsi" +#include "fsl-imx8qm-apalis-u-boot.dtsi" + +/ { + model = "Toradex Apalis iMX8QM"; + compatible = "toradex,apalis-imx8qm", "fsl,imx8qm"; + + chosen { + bootargs = "console=ttyLP1,115200 earlycon=lpuart32,0x5a070000,115200"; + stdout-path = &lpuart1; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio12>, <&pinctrl_gpio34>, <&pinctrl_gpio56>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, <&pinctrl_gpio_bkl_on>, + <&pinctrl_gpio_keys>, <&pinctrl_gpio_pwm0>, + <&pinctrl_gpio_pwm1>, <&pinctrl_gpio_pwm2>, + <&pinctrl_gpio_pwm3>, <&pinctrl_gpio_pwm_bkl>, + <&pinctrl_gpio_usbh_en>, <&pinctrl_gpio_usbh_oc_n>, + <&pinctrl_gpio_usbo1_en>, <&pinctrl_gpio_usbo1_oc_n>, + <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, + <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, + <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, + <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>, + <&pinctrl_sim0_gpios>, <&pinctrl_usdhc1_gpios>; + + apalis-imx8qm { + pinctrl_gpio12: gpio12grp { + fsl,pins = < + /* Apalis GPIO1 */ + SC_P_M40_GPIO0_00_LSIO_GPIO0_IO08 0x06000021 + /* Apalis GPIO2 */ + SC_P_M40_GPIO0_01_LSIO_GPIO0_IO09 0x06000021 + >; + }; + + pinctrl_gpio34: gpio34grp { + fsl,pins = < + /* Apalis GPIO3 */ + SC_P_M41_GPIO0_00_LSIO_GPIO0_IO12 0x06000021 + /* Apalis GPIO4 */ + SC_P_M41_GPIO0_01_LSIO_GPIO0_IO13 0x06000021 + >; + }; + + pinctrl_gpio56: gpio56grp { + fsl,pins = < + /* Apalis GPIO5 */ + SC_P_FLEXCAN2_RX_LSIO_GPIO4_IO01 0x06000021 + /* Apalis GPIO6 */ + SC_P_FLEXCAN2_TX_LSIO_GPIO4_IO02 0x06000021 + >; + }; + + pinctrl_gpio7: gpio7 { + fsl,pins = < + /* Apalis GPIO7 */ + SC_P_MLB_SIG_LSIO_GPIO3_IO26 0x00000021 + >; + }; + + pinctrl_gpio8: gpio8 { + fsl,pins = < + /* Apalis GPIO8 */ + SC_P_MLB_DATA_LSIO_GPIO3_IO28 0x00000021 + >; + }; + + pinctrl_gpio_keys: gpio-keys { + fsl,pins = < + /* Apalis WAKE1_MICO */ + SC_P_SPI3_CS0_LSIO_GPIO2_IO20 0x06000021 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0 /* Use pads in 3.3V mode */ + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020 + /* ETH_RESET# */ + SC_P_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020 + >; + }; + + pinctrl_gpio_bkl_on: gpio-bkl-on { + fsl,pins = < + /* Apalis BKL_ON */ + SC_P_LVDS0_GPIO00_LSIO_GPIO1_IO04 0x00000021 + >; + }; + + /* Apalis I2C2 (DDC) */ + pinctrl_lpi2c0: lpi2c0grp { + fsl,pins = < + SC_P_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x04000022 + SC_P_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x04000022 + >; + }; + + pinctrl_cam1_gpios: cam1gpiosgrp { + fsl,pins = < + /* Apalis CAM1_D7 */ + SC_P_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20 0x00000021 + /* Apalis CAM1_D6 */ + SC_P_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21 0x00000021 + /* Apalis CAM1_D5 */ + SC_P_ESAI0_TX0_LSIO_GPIO2_IO26 0x00000021 + /* Apalis CAM1_D4 */ + SC_P_ESAI0_TX1_LSIO_GPIO2_IO27 0x00000021 + /* Apalis CAM1_D3 */ + SC_P_ESAI0_TX2_RX3_LSIO_GPIO2_IO28 0x00000021 + /* Apalis CAM1_D2 */ + SC_P_ESAI0_TX3_RX2_LSIO_GPIO2_IO29 0x00000021 + /* Apalis CAM1_D1 */ + SC_P_ESAI0_TX4_RX1_LSIO_GPIO2_IO30 0x00000021 + /* Apalis CAM1_D0 */ + SC_P_ESAI0_TX5_RX0_LSIO_GPIO2_IO31 0x00000021 + /* Apalis CAM1_PCLK */ + SC_P_MCLK_IN0_LSIO_GPIO3_IO00 0x00000021 + /* Apalis CAM1_MCLK */ + SC_P_SPI3_SDO_LSIO_GPIO2_IO18 0x00000021 + /* Apalis CAM1_VSYNC */ + SC_P_ESAI0_SCKR_LSIO_GPIO2_IO24 0x00000021 + /* Apalis CAM1_HSYNC */ + SC_P_ESAI0_SCKT_LSIO_GPIO2_IO25 0x00000021 + >; + }; + + pinctrl_dap1_gpios: dap1gpiosgrp { + fsl,pins = < + /* Apalis DAP1_MCLK */ + SC_P_SPI3_SDI_LSIO_GPIO2_IO19 0x00000021 + /* Apalis DAP1_D_OUT */ + SC_P_SAI1_RXC_LSIO_GPIO3_IO12 0x00000021 + /* Apalis DAP1_RESET */ + SC_P_ESAI1_SCKT_LSIO_GPIO2_IO07 0x00000021 + /* Apalis DAP1_BIT_CLK */ + SC_P_SPI0_CS1_LSIO_GPIO3_IO06 0x00000021 + /* Apalis DAP1_D_IN */ + SC_P_SAI1_RXFS_LSIO_GPIO3_IO14 0x00000021 + /* Apalis DAP1_SYNC */ + SC_P_SPI2_CS1_LSIO_GPIO3_IO11 0x00000021 + /* Wi-Fi_I2S_EN# */ + SC_P_ESAI1_TX5_RX0_LSIO_GPIO2_IO13 0x00000021 + >; + }; + + pinctrl_esai0_gpios: esai0gpiosgrp { + fsl,pins = < + /* Apalis LCD1_G1 */ + SC_P_ESAI0_FSR_LSIO_GPIO2_IO22 0x00000021 + /* Apalis LCD1_G2 */ + SC_P_ESAI0_FST_LSIO_GPIO2_IO23 0x00000021 + >; + }; + + pinctrl_fec2_gpios: fec2gpiosgrp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 + /* Apalis LCD1_R1 */ + SC_P_ENET1_MDC_LSIO_GPIO4_IO18 0x00000021 + /* Apalis LCD1_R0 */ + SC_P_ENET1_MDIO_LSIO_GPIO4_IO17 0x00000021 + /* Apalis LCD1_G0 */ + SC_P_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16 0x00000021 + /* Apalis LCD1_R7 */ + SC_P_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17 0x00000021 + /* Apalis LCD1_DE */ + SC_P_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18 0x00000021 + /* Apalis LCD1_HSYNC */ + SC_P_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19 0x00000021 + /* Apalis LCD1_VSYNC */ + SC_P_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20 0x00000021 + /* Apalis LCD1_PCLK */ + SC_P_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21 0x00000021 + /* Apalis LCD1_R6 */ + SC_P_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11 0x00000021 + /* Apalis LCD1_R5 */ + SC_P_ENET1_RGMII_TXC_LSIO_GPIO6_IO10 0x00000021 + /* Apalis LCD1_R4 */ + SC_P_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12 0x00000021 + /* Apalis LCD1_R3 */ + SC_P_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13 0x00000021 + /* Apalis LCD1_R2 */ + SC_P_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14 0x00000021 + >; + }; + + pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpio { + fsl,pins = < + /* Apalis TS_2 */ + SC_P_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06 0x00000021 + >; + }; + + pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp { + fsl,pins = < + /* Apalis LCD1_G6 */ + SC_P_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12 0x00000021 + /* Apalis LCD1_G7 */ + SC_P_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13 0x00000021 + >; + }; + + pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp { + fsl,pins = < + /* Apalis TS_4 */ + SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22 0x00000021 + >; + }; + + pinctrl_mlb_gpios: mlbgpiosgrp { + fsl,pins = < + /* Apalis TS_1 */ + SC_P_MLB_CLK_LSIO_GPIO3_IO27 0x00000021 + >; + }; + + pinctrl_qspi1a_gpios: qspi1agpiosgrp { + fsl,pins = < + /* Apalis LCD1_B0 */ + SC_P_QSPI1A_DATA0_LSIO_GPIO4_IO26 0x00000021 + /* Apalis LCD1_B1 */ + SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x00000021 + /* Apalis LCD1_B2 */ + SC_P_QSPI1A_DATA2_LSIO_GPIO4_IO24 0x00000021 + /* Apalis LCD1_B3 */ + SC_P_QSPI1A_DATA3_LSIO_GPIO4_IO23 0x00000021 + /* Apalis LCD1_B5 */ + SC_P_QSPI1A_DQS_LSIO_GPIO4_IO22 0x00000021 + /* Apalis LCD1_B7 */ + SC_P_QSPI1A_SCLK_LSIO_GPIO4_IO21 0x00000021 + /* Apalis LCD1_B4 */ + SC_P_QSPI1A_SS0_B_LSIO_GPIO4_IO19 0x00000021 + /* Apalis LCD1_B6 */ + SC_P_QSPI1A_SS1_B_LSIO_GPIO4_IO20 0x00000021 + >; + }; + + pinctrl_sim0_gpios: sim0gpiosgrp { + fsl,pins = < + /* Apalis LCD1_G5 */ + SC_P_SIM0_CLK_LSIO_GPIO0_IO00 0x00000021 + /* Apalis LCD1_G3 */ + SC_P_SIM0_GPIO0_00_LSIO_GPIO0_IO05 0x00000021 + /* Apalis TS_5 */ + SC_P_SIM0_IO_LSIO_GPIO0_IO02 0x00000021 + /* Apalis LCD1_G4 */ + SC_P_SIM0_RST_LSIO_GPIO0_IO01 0x00000021 + >; + }; + + pinctrl_usdhc1_gpios: usdhc1gpiosgrp { + fsl,pins = < + /* Apalis TS_6 */ + SC_P_USDHC1_STROBE_LSIO_GPIO5_IO23 0x00000021 + >; + }; + + pinctrl_mipi_dsi_0_1_en: mipi_dsi_0_1_en { + fsl,pins = < + /* Apalis TS_3 */ + SC_P_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07 0x00000021 + >; + }; + + /* On-module I2C */ + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + SC_P_GPT0_CLK_DMA_I2C1_SCL 0x04000020 + SC_P_GPT0_CAPTURE_DMA_I2C1_SDA 0x04000020 + >; + }; + + /* Apalis I2C1 */ + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + SC_P_GPT1_CLK_DMA_I2C2_SCL 0x04000020 + SC_P_GPT1_CAPTURE_DMA_I2C2_SDA 0x04000020 + >; + }; + + /* Apalis I2C3 (CAM) */ + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + SC_P_SIM0_PD_DMA_I2C3_SCL 0x04000020 + SC_P_SIM0_POWER_EN_DMA_I2C3_SDA 0x04000020 + >; + }; + + /* Apalis UART3 */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_DMA_UART0_RX 0x06000020 + SC_P_UART0_TX_DMA_UART0_TX 0x06000020 + >; + }; + + /* Apalis UART1 */ + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + SC_P_UART1_RX_DMA_UART1_RX 0x06000020 + SC_P_UART1_TX_DMA_UART1_TX 0x06000020 + SC_P_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020 + SC_P_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020 + >; + }; + + pinctrl_lpuart1ctrl: lpuart1ctrlgrp { + fsl,pins = < + /* Apalis UART1_DTR */ + SC_P_M40_I2C0_SCL_LSIO_GPIO0_IO06 0x00000021 + /* Apalis UART1_DSR */ + SC_P_M40_I2C0_SDA_LSIO_GPIO0_IO07 0x00000021 + /* Apalis UART1_DCD */ + SC_P_M41_I2C0_SCL_LSIO_GPIO0_IO10 0x00000021 + /* Apalis UART1_RI */ + SC_P_M41_I2C0_SDA_LSIO_GPIO0_IO11 0x00000021 + >; + }; + + /* Apalis UART4 */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + SC_P_LVDS0_I2C1_SCL_DMA_UART2_TX 0x06000020 + SC_P_LVDS0_I2C1_SDA_DMA_UART2_RX 0x06000020 + >; + }; + + /* Apalis UART2 */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + SC_P_LVDS1_I2C1_SCL_DMA_UART3_TX 0x06000020 + SC_P_LVDS1_I2C1_SDA_DMA_UART3_RX 0x06000020 + SC_P_ENET1_RGMII_TXD3_DMA_UART3_RTS_B 0x06000020 + SC_P_ENET1_RGMII_RXC_DMA_UART3_CTS_B 0x06000020 + >; + }; + + /* Apalis PWM3 */ + pinctrl_gpio_pwm0: gpiopwm0grp { + fsl,pins = < + SC_P_UART0_RTS_B_LSIO_GPIO0_IO22 0x00000021 + >; + }; + + /* Apalis PWM4 */ + pinctrl_gpio_pwm1: gpiopwm1grp { + fsl,pins = < + SC_P_UART0_CTS_B_LSIO_GPIO0_IO23 0x00000021 + >; + }; + + /* Apalis PWM1 */ + pinctrl_gpio_pwm2: gpiopwm2grp { + fsl,pins = < + SC_P_GPT1_COMPARE_LSIO_GPIO0_IO19 0x00000021 + >; + }; + + /* Apalis PWM2 */ + pinctrl_gpio_pwm3: gpiopwm3grp { + fsl,pins = < + SC_P_GPT0_COMPARE_LSIO_GPIO0_IO16 0x00000021 + >; + }; + + /* Apalis BKL1_PWM */ + pinctrl_gpio_pwm_bkl: gpiopwmbklgrp { + fsl,pins = < + SC_P_LVDS1_GPIO00_LVDS1_GPIO0_IO00 0x00000021 + >; + }; + + /* Apalis USBH_EN */ + pinctrl_gpio_usbh_en: gpiousbhen { + fsl,pins = < + SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x06000060 + >; + }; + + /* Apalis USBH_OC# */ + pinctrl_gpio_usbh_oc_n: gpiousbhocn { + fsl,pins = < + SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 0x06000060 + >; + }; + + /* Apalis USBO1_EN */ + pinctrl_gpio_usbo1_en: gpiousbo1en { + fsl,pins = < + SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000060 + >; + }; + + /* Apalis USBO1_OC# */ + pinctrl_gpio_usbo1_oc_n: gpiousbo1ocn { + fsl,pins = < + SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 0x06000060 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_sata1_act: sata1actgrp { + fsl,pins = < + /* Apalis SATA1_ACT# */ + SC_P_ESAI1_TX0_LSIO_GPIO2_IO08 0x00000021 + >; + }; + + pinctrl_mmc1_cd: mmc1cdgrp { + fsl,pins = < + /* Apalis MMC1_CD# */ + SC_P_ESAI1_TX1_LSIO_GPIO2_IO09 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000021 + SC_P_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000021 + SC_P_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000021 + SC_P_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000021 + /* On-module PMIC use */ + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_sd1_cd: sd1cdgrp { + fsl,pins = < + /* Apalis SD1_CD# */ + SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021 + /* On-module PMIC use */ + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021 + >; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 11 1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; + }; +}; + +/* Apalis I2C2 (DDC) */ +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c0>; + clock-frequency = <100000>; + status = "okay"; +}; + +/* On-module I2C */ +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; +}; + +/* Apalis I2C1 */ +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_mmc1_cd>; + bus-width = <8>; + cd-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */ + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>; + bus-width = <4>; + cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */ + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-imx8qm.dtsi b/arch/arm/dts/fsl-imx8qm.dtsi index b39c40bd98b6491913111dffc64a53cd43abfbd6..af060db3a12864c8a6323167266bb9da3c341db7 100644 --- a/arch/arm/dts/fsl-imx8qm.dtsi +++ b/arch/arm/dts/fsl-imx8qm.dtsi @@ -22,9 +22,18 @@ ethernet0 = &fec1; ethernet1 = &fec2; serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; + serial4 = &lpuart4; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; }; memory@80000000 { @@ -193,9 +202,103 @@ power-domains = <&pd_dma>; wakeup-irq = <345>; }; + pd_dma_lpuart1: PD_DMA_UART1 { + reg = ; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <346>; + }; + pd_dma_lpuart2: PD_DMA_UART2 { + reg = ; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <347>; + }; + pd_dma_lpuart3: PD_DMA_UART3 { + reg = ; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <348>; + }; + pd_dma_lpuart4: PD_DMA_UART4 { + reg = ; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <349>; + }; }; }; + i2c0: i2c@5a800000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a800000 0x0 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C0_CLK>, + <&clk IMX8QM_I2C0_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C0_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c0>; + status = "disabled"; + }; + + i2c1: i2c@5a810000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a810000 0x0 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C1_CLK>, + <&clk IMX8QM_I2C1_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C1_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c1>; + status = "disabled"; + }; + + i2c2: i2c@5a820000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a820000 0x0 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C2_CLK>, + <&clk IMX8QM_I2C2_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C2_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c2>; + status = "disabled"; + }; + + i2c3: i2c@5a830000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a830000 0x0 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C3_CLK>, + <&clk IMX8QM_I2C3_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C3_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c3>; + status = "disabled"; + }; + + i2c4: i2c@5a840000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a840000 0x0 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C4_CLK>, + <&clk IMX8QM_I2C4_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C4_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c4>; + status = "disabled"; + }; + gpio0: gpio@5d080000 { compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; reg = <0x0 0x5d080000 0x0 0x10000>; @@ -297,6 +400,58 @@ status = "disabled"; }; + lpuart1: serial@5a070000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a070000 0x0 0x1000>; + interrupts = ; + clocks = <&clk IMX8QM_UART1_CLK>, + <&clk IMX8QM_UART1_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART1_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart1>; + status = "disabled"; + }; + + lpuart2: serial@5a080000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a080000 0x0 0x1000>; + interrupts = ; + clocks = <&clk IMX8QM_UART2_CLK>, + <&clk IMX8QM_UART2_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART2_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart2>; + status = "disabled"; + }; + + lpuart3: serial@5a090000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a090000 0x0 0x1000>; + interrupts = ; + clocks = <&clk IMX8QM_UART3_CLK>, + <&clk IMX8QM_UART3_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART3_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart3>; + status = "disabled"; + }; + + lpuart4: serial@5a0a0000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a0a0000 0x0 0x1000>; + interrupts = ; + clocks = <&clk IMX8QM_UART4_CLK>, + <&clk IMX8QM_UART4_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART4_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart4>; + status = "disabled"; + }; + usdhc1: usdhc@5b010000 { compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc"; interrupt-parent = <&gic>; diff --git a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..5b061f94ba6160d0e55ba9739e06e6a761bafbf2 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2019 Toradex AG + */ + +&{/imx8qx-pm} { + + u-boot,dm-spl; +}; + +&mu { + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pd_lsio { + u-boot,dm-spl; +}; + +&pd_lsio_gpio0 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio1 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio2 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio3 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio4 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio5 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio6 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio7 { + u-boot,dm-spl; +}; + +&pd_conn { + u-boot,dm-spl; +}; + +&pd_conn_sdch0 { + u-boot,dm-spl; +}; + +&pd_conn_sdch1 { + u-boot,dm-spl; +}; + +&pd_conn_sdch2 { + u-boot,dm-spl; +}; + +&gpio0 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&gpio6 { + u-boot,dm-spl; +}; + +&gpio7 { + u-boot,dm-spl; +}; + +&lpuart3 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/fsl-imx8qxp-colibri.dts b/arch/arm/dts/fsl-imx8qxp-colibri.dts new file mode 100644 index 0000000000000000000000000000000000000000..0c20edf2cf34870fb82420803ae102dcdc2c44e6 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp-colibri.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2019 Toradex AG + */ + +/dts-v1/; + +#include "fsl-imx8qxp.dtsi" +#include "fsl-imx8qxp-colibri-u-boot.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP"; + compatible = "toradex,colibri-imx8qxp", "fsl,imx8qxp"; + + chosen { + bootargs = "console=ttyLP3,115200 earlycon=lpuart32,0x5a090000,115200"; + stdout-path = &lpuart3; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 3 GPIO_ACTIVE_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_hog2>; + + colibri-imx8qxp { + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 + SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + SC_P_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 + SC_P_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 + >; + }; + + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = < + SC_P_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x00000020 /* DTR */ + SC_P_SAI1_RXD_LSIO_GPIO0_IO29 0x00000020 /* CTS */ + SC_P_SAI1_RXC_LSIO_GPIO0_IO30 0x00000020 /* RTS */ + SC_P_CSI_RESET_LSIO_GPIO3_IO03 0x00000020 /* DSR */ + SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000020 /* DCD */ + SC_P_CSI_EN_LSIO_GPIO3_IO02 0x00000020 /* RI */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0 /* Use pads in 3.3V mode */ + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x000014a0 /* Use pads in 3.3V mode */ + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000061 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000061 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000061 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000061 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000061 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000061 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x00000061 + >; + }; + + pinctrl_gpio_bl_on: gpio-bl-on { + fsl,pins = < + SC_P_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x00000040 + >; + }; + + pinctrl_hog0: hog0grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 /* Use pads in 3.3V mode */ + >; + }; + + pinctrl_hog1: hog1grp { + fsl,pins = < + SC_P_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x00000020 /* 45 */ + SC_P_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* 65 */ + SC_P_CSI_D07_CI_PI_D09 0x00000061 + SC_P_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x00000020 /* 69 */ + SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 0x00000020 /* 73 */ + SC_P_SAI0_TXC_LSIO_GPIO0_IO26 0x00000020 /* 79 */ + SC_P_CSI_D02_CI_PI_D04 0x00000061 + SC_P_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* 85 */ + SC_P_CSI_D06_CI_PI_D08 0x00000061 + SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x00000020 /* 95 */ + SC_P_SAI0_RXD_LSIO_GPIO0_IO27 0x00000020 /* 97 */ + SC_P_CSI_D03_CI_PI_D05 0x00000061 + SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x00000020 /* 99 */ + SC_P_SAI0_TXFS_LSIO_GPIO0_IO28 0x00000020 /* 101 */ + SC_P_CSI_D00_CI_PI_D02 0x00000061 + SC_P_SAI0_TXD_LSIO_GPIO0_IO25 0x00000020 /* 103 */ + SC_P_CSI_D01_CI_PI_D03 0x00000061 + SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x00000020 /* 105 */ + SC_P_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x00000020 /* 107 */ + SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 0x00000020 /* 127 */ + SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 0x00000020 /* 131 */ + SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x00000020 /* 133 */ + SC_P_CSI_PCLK_LSIO_GPIO3_IO00 0x00000020 /* 96 */ + SC_P_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x00000020 /* 98 */ + SC_P_SAI1_RXFS_LSIO_GPIO0_IO31 0x00000020 /* 100 */ + SC_P_QSPI0B_DQS_LSIO_GPIO3_IO22 0x00000020 /* 102 */ + SC_P_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x00000020 /* 104 */ + SC_P_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000020 /* 106 */ + >; + }; + + pinctrl_hog2: hog2grp { + fsl,pins = < + SC_P_CSI_MCLK_LSIO_GPIO3_IO01 0x00000020 /* 75 */ + SC_P_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x00000020 /* 77 */ + SC_P_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x00000020 /* 89 */ + SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x00000020 /* 93 */ + >; + }; + + /* Off Module I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = < + SC_P_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 + SC_P_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 + >; + }; + + /*INT*/ + pinctrl_usb3503a: usb3503a-grp { + fsl,pins = < + SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x00000061 + >; + }; + + pinctrl_usbc_det: usbc-det { + fsl,pins = < + SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 + >; + }; + + pinctrl_usbh1_reg: usbh1-reg { + fsl,pins = < + SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + SC_P_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&fec1 { + phy-handle = <ðphy0>; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-dhcom-pdk2.dts b/arch/arm/dts/imx6q-dhcom-pdk2.dts new file mode 100644 index 0000000000000000000000000000000000000000..9c61e3be2d9a37613f42efaf72cb13e982e830af --- /dev/null +++ b/arch/arm/dts/imx6q-dhcom-pdk2.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut + */ + +/dts-v1/; + +#include "imx6q-dhcom-som.dtsi" + +/ { + model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)"; + compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q"; + + chosen { + stdout-path = &uart1; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_ext>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>; + + pinctrl_hog: hog-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0 + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0 + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0 + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0 + >; + }; + + pinctrl_audmux_ext: audmux-ext-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_enet_1G: enet-1G-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1 + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1 + >; + }; + + pinctrl_pcie: pcie-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-dhcom-som.dtsi b/arch/arm/dts/imx6q-dhcom-som.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..524cd287c65e531599744dfaee9d0d02b3d0f312 --- /dev/null +++ b/arch/arm/dts/imx6q-dhcom-som.dtsi @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut + */ + +#include "imx6q.dtsi" +#include +#include +#include +#include + +/ { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + mmc3 = &usdhc1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3p3v: regulator-3P3V { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { /* S25FL116K */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + m25p,fast-read; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_100M>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ + reg = <0>; + max-speed = <100>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_hw300>; + reg = <0x3c>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <1040000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1885714>; + regulator-max-microvolt = <3657142>; + lltc,fb-voltage-divider = <100000 28000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <980000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <855571>; + regulator-max-microvolt = <1659291>; + lltc,fb-voltage-divider = <100000 93100>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <3240306>; + regulator-max-microvolt = <3240306>; + lltc,fb-voltage-divider = <102000 29400>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2484708>; + regulator-max-microvolt = <2484708>; + lltc,fb-voltage-divider = <100000 41200>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + touchscreen@49 { /* TSC2004 */ + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2004_hw300>; + interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc@56 { + compatible = "rv3029c2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_hw300>; + reg = <0x56>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base>; + + pinctrl_hog_base: hog-base-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x120b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x120b0 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x120b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x120b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x120b0 + >; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0 + >; + }; + + pinctrl_enet_100M: enet-100M-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0 + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pmic_hw300: pmic-hw300-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0 + >; + }; + + pinctrl_rtc_hw300: rtc-hw300-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x120B0 + >; + }; + + pinctrl_tsc2004_hw300: tsc2004-hw300-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x120B0 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x4001b0b1 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b1 + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x4001b0b1 + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x4001b0b1 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x4001b0b1 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x4001b0b1 + >; + }; + + pinctrl_usbh1: usbh1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120B0 + >; + }; + + pinctrl_usbotg: usbotg-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x120B0 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x120B0 + >; + }; + + pinctrl_usdhc4: usdhc4-grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; + +®_arm { + vin-supply = <&sw3_reg>; +}; + +®_soc { + vin-supply = <&sw1_reg>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + fsl,wp-controller; + keep-power-in-suspend; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + non-removable; + bus-width = <8>; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-novena.dts b/arch/arm/dts/imx6q-novena.dts new file mode 100644 index 0000000000000000000000000000000000000000..35383c9a2b1f9a9bef60b98a9a52c2b2eb778a80 --- /dev/null +++ b/arch/arm/dts/imx6q-novena.dts @@ -0,0 +1,797 @@ +/* + * Copyright 2015 Sutajio Ko-Usagi PTE LTD + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include +#include + +/ { + model = "Kosagi Novena Dual/Quad"; + compatible = "kosagi,imx6q-novena", "fsl,imx6q"; + + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + }; + + chosen { + stdout-path = &uart2; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 10000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_novena>; + power-supply = <®_lvds_lcd>; + brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>; + default-brightness-level = <12>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys_novena>; + + user-button { + label = "User Button"; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + lid { + label = "Lid"; + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_novena>; + + heartbeat { + label = "novena:white:panel"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + panel: panel { + compatible = "innolux,n133hse-ea1", "simple-panel"; + backlight = <&backlight>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_audio_codec: regulator-audio-codec { + compatible = "regulator-fixed"; + regulator-name = "es8328-power"; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <400000>; + gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_display: regulator-display { + compatible = "regulator-fixed"; + regulator-name = "lcd-display-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_lcd: regulator-lvds-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd-lvds-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "pcie-bus-power"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sata: regulator-sata { + compatible = "regulator-fixed"; + regulator-name = "sata-power"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <10000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-es8328"; + model = "imx-audio-es8328"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-amp-supply = <®_audio_codec>; + jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>; + audio-routing = + "Speaker", "LOUT2", + "Speaker", "ROUT2", + "Speaker", "audio-amp", + "Headphone", "ROUT1", + "Headphone", "LOUT1", + "LINPUT1", "Mic Jack", + "RINPUT1", "Mic Jack", + "Mic Jack", "Mic Bias"; + mux-int-port = <0x1>; + mux-ext-port = <0x3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_novena>; + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_novena>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_novena>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txen-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <3000>; + txd1-skew-ps = <3000>; + txd2-skew-ps = <3000>; + txd3-skew-ps = <3000>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_novena>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_novena>; + status = "okay"; + + accel: mma8452@1c { + compatible = "fsl,mma8452"; + reg = <0x1c>; + }; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sbs_battery: bq20z75@b { + compatible = "sbs,sbs-battery"; + reg = <0x0b>; + sbs,i2c-retry-count = <50>; + }; + + touch: stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe_novena>; + vio-supply = <®_3p3v>; + vcc-supply = <®_3p3v>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_novena>; + status = "okay"; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + reg_sw1a: sw1a { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + reg_sw1c: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw2: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw3a: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw3b: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw4: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_swbst: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_snvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vref: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen2: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen3: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vgen4: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_novena>; + status = "okay"; + + codec: es8328@11 { + compatible = "everest,es8328"; + reg = <0x11>; + DVDD-supply = <®_audio_codec>; + AVDD-supply = <®_audio_codec>; + PVDD-supply = <®_audio_codec>; + HPVDD-supply = <®_audio_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound_novena>; + clocks = <&clks IMX6QDL_CLK_CKO1>; + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO1_SEL>, + <&clks IMX6QDL_CLK_PLL4_AUDIO>, + <&clks IMX6QDL_CLK_CKO1>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>, + <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>, + <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_CKO1_PODF>; + assigned-clock-rates = <0 0 722534400 22579200>; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp_novena>; + linux,keymap = < + MATRIX_KEY(1, 1, KEY_CONFIG) + >; + status = "okay"; +}; + +&ldb { + fsl,dual-channel; + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "jeida"; + fsl,data-width = <24>; + fsl,panel = <&panel>; + status = "okay"; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_novena>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&sata { + target-supply = <®_sata>; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <8>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_novena>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_novena>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_novena>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_novena>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_swbst>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_novena>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_novena>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux_novena: audmuxgrp-novena { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight_novena: backlightgrp-novena { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1 + >; + }; + + pinctrl_ecspi3_novena: ecspi3grp-novena { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_enet_novena: enetgrp-novena { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Ethernet reset */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1 + >; + }; + + pinctrl_fpga_gpio: fpgagpiogrp-novena { + fsl,pins = < + /* FPGA power */ + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 + /* Reset */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 + /* FPGA GPIOs */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1 + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1 + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1 + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1 + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1 + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1 + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1 + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1 + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1 + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1 + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1 + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1 + >; + }; + + pinctrl_fpga_eim: fpgaeimgrp-novena { + fsl,pins = < + /* FPGA power */ + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 + /* Reset */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 + /* FPGA GPIOs */ + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1 + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1 + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1 + MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1 + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1 + MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1 + >; + }; + + pinctrl_gpio_keys_novena: gpiokeysgrp-novena { + fsl,pins = < + /* User button */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + /* PCIe Wakeup */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0 + /* Lid switch */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 + >; + }; + + pinctrl_hdmi_novena: hdmigrp-novena { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 + >; + }; + + pinctrl_i2c1_novena: i2c1grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2_novena: i2c2grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_novena: i2c3grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp_novena: kppgrp-novena { + fsl,pins = < + /* Front panel button */ + MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1 + /* Fake column driver, not connected */ + MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1 + >; + }; + + pinctrl_leds_novena: ledsgrp-novena { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1 + >; + }; + + pinctrl_pcie_novena: pciegrp-novena { + fsl,pins = < + /* Reset */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 + /* Power On */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 + /* Wifi kill */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1 + >; + }; + + pinctrl_sata_novena: satagrp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1 + >; + }; + + pinctrl_senoko_novena: senokogrp-novena { + fsl,pins = < + /* Senoko IRQ line */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048 + /* Senoko reset line */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1 + >; + }; + + pinctrl_sound_novena: soundgrp-novena { + fsl,pins = < + /* Audio power regulator */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1 + /* Headphone plug */ + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_stmpe_novena: stmpegrp-novena { + fsl,pins = < + /* Touchscreen interrupt */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1 + >; + }; + + pinctrl_uart2_novena: uart2grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3_novena: uart3grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4_novena: uart4grp-novena { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg_novena: usbotggrp-novena { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2_novena: usdhc2grp-novena { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + /* Write protect */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 + /* Card detect */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 + >; + }; + + pinctrl_usdhc3_novena: usdhc3grp-novena { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/dts/imx6qdl-u-boot.dtsi b/arch/arm/dts/imx6qdl-u-boot.dtsi index 0aa29e38b831deb48db8990bc00929dbd3877a39..e161ebb9af45221d621f4cf31aa1d3704d501f3f 100644 --- a/arch/arm/dts/imx6qdl-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-u-boot.dtsi @@ -4,6 +4,10 @@ */ / { + aliases { + usb0 = &usbotg; + }; + soc { u-boot,dm-spl; diff --git a/arch/arm/dts/imx6sx-softing-vining-2000.dts b/arch/arm/dts/imx6sx-softing-vining-2000.dts new file mode 100644 index 0000000000000000000000000000000000000000..371890ff6084412c4e9c4495063b319aaab59682 --- /dev/null +++ b/arch/arm/dts/imx6sx-softing-vining-2000.dts @@ -0,0 +1,578 @@ +/* + * Copyright (C) 2016 Christoph Fritz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sx.dtsi" + +/ { + model = "Softing VIN|ING 2000"; + compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx"; + + aliases { + mmc0 = &usdhc4; + mmc1 = &usdhc2; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg1_vbus: regulator-usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_peri_3v3: regulator-peri_3v3 { + compatible = "regulator-fixed"; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pwmleds { + compatible = "pwm-leds"; + + red { + label = "red"; + max-brightness = <255>; + pwms = <&pwm6 0 50000>; + }; + + green { + label = "green"; + max-brightness = <255>; + pwms = <&pwm2 0 50000>; + }; + + blue { + label = "blue"; + max-brightness = <255>; + pwms = <&pwm1 0 50000>; + }; + }; +}; + +&adc1 { + vref-supply = <®_peri_3v3>; + status = "okay"; +}; + +&cpu0 { + /* + * This board has a shared rail of reg_arm and reg_soc (supplied by + * sw1a_reg) which is modeled below, but still this module behaves + * unstable without higher voltages. Hence, set higher voltages here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet0-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet1-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + proximity: sx9500@28 { + compatible = "semtech,sx9500"; + reg = <0x28>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx9500>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + }; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x130b1 + MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x130b1 + MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x130b1 + MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x30b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x30c1 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x30c1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0f9 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0f9 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x30c1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0f9 + MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0f9 + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x10b0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x1b0b0 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x1b0b0 + MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_COL__ENET2_MDC 0xa0f9 + MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x10b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + /* reset external uC */ + MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x10b0 + /* IRQ from external uC */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x10b0 + /* overcurrent detection */ + MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x10b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_NAND_ALE__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_NAND_CLE__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp-1 { + fsl,pins = < + /* blue LED */ + MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp-1 { + fsl,pins = < + /* green LED */ + MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm6: pwm6grp-1 { + fsl,pins = < + /* red LED */ + MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1 + >; + }; + + pinctrl_sx9500: sx9500grp { + fsl,pins = < + /* Reset */ + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x838 + /* IRQ */ + MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x70e0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2_50mhz: usdhc2grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x1b000 + MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x10b0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170b9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170b9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170b9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170f9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170f9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170f9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc4_50mhz: usdhc4grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059 + MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_soc { + vin-supply = <&sw1a_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_50mhz>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc4 { + /* hs200-mode is currently unsupported because Vccq is on 3.1V, but + * not on necessary 1.8V. + */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4_50mhz>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + bus-width = <8>; + keep-power-in-suspend; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6ul-phycore-segin.dts b/arch/arm/dts/imx6ul-phycore-segin.dts index a46012e2b44d6212d057e8fcbd44fc448fc572bf..7d68bf8430568a57bb595753c393d4022eaf6ea0 100644 --- a/arch/arm/dts/imx6ul-phycore-segin.dts +++ b/arch/arm/dts/imx6ul-phycore-segin.dts @@ -16,7 +16,8 @@ /dts-v1/; -#include "imx6ul-pcl063.dtsi" +#include "imx6ul.dtsi" +#include "pcl063-common.dtsi" / { model = "Phytec phyBOARD-i.MX6UL-Segin SBC"; @@ -24,6 +25,10 @@ "fsl,imx6ul"; }; +&gpmi { + status = "okay"; +}; + &i2c1 { i2c_rtc: rtc@68 { compatible = "microcrystal,rv4162"; diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts index 4196cbdf221d512a5080154fa884e3cd7fca81d9..6c847ab7921b90f9a66f078fff056ccbe10280db 100644 --- a/arch/arm/dts/imx6ull-colibri.dts +++ b/arch/arm/dts/imx6ull-colibri.dts @@ -220,7 +220,7 @@ /* Colibri USBC */ &usbotg1 { - dr_mode = "otg"; + dr_mode = "host"; srp-disable; hnp-disable; adp-disable; diff --git a/arch/arm/dts/imx6ull-phycore-segin.dts b/arch/arm/dts/imx6ull-phycore-segin.dts new file mode 100644 index 0000000000000000000000000000000000000000..6df3ad2e4a4313bf8d846ed298507996c11542ad --- /dev/null +++ b/arch/arm/dts/imx6ull-phycore-segin.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Parthiban Nallathambi + */ + +/dts-v1/; + +#include "imx6ull.dtsi" +#include "pcl063-common.dtsi" + +/ { + model = "Phytec phyBOARD-i.MX6ULL-Segin SBC"; + compatible = "phytec,phyboard-imx6ull-segin", "phytec,imx6ull-pcl063", + "fsl,imx6ull"; +}; + +&i2c1 { + i2c_rtc: rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + status = "okay"; + }; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + +}; diff --git a/arch/arm/dts/imx6ull-u-boot.dtsi b/arch/arm/dts/imx6ull-u-boot.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..74ca95fa2c88b19064912072a043e50728cd9790 --- /dev/null +++ b/arch/arm/dts/imx6ull-u-boot.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Parthiban Nallathambi + */ + +/ { + soc { + u-boot,dm-spl; + }; +}; + +&aips1 { + u-boot,dm-spl; +}; + +&aips2 { + u-boot,dm-spl; +}; + +&aips3 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx7-colibri-emmc.dts b/arch/arm/dts/imx7-colibri-emmc.dts index 8db2a6270783f79cf2a80ceba144b873f036b577..bc0d10c716d369a61a644d3fde48768dfff3d991 100644 --- a/arch/arm/dts/imx7-colibri-emmc.dts +++ b/arch/arm/dts/imx7-colibri-emmc.dts @@ -15,11 +15,30 @@ mmc0 = &usdhc3; mmc1 = &usdhc1; display1 = &lcdif; + usb0 = &usbotg1; /* required for ums */ }; chosen { stdout-path = &uart1; }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &usdhc3 { @@ -46,4 +65,30 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 >; }; + + pinctrl_usbh_reg: gpio-usbh-vbus { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; +}; + +/* Colibri USBC */ +&usbotg1 { + /* + * usbotg1 on Colibri iMX7 can function in both host/otg modes. + * Gadget stack currently does not look at this at all while + * the host stack refuses to bind/load if it is not set to host + * (it obviously won't be enumerated during usb start invocation + * if dr_mode = "otg") + */ + dr_mode = "host"; + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; + status = "okay"; }; diff --git a/arch/arm/dts/imx7-colibri-rawnand.dts b/arch/arm/dts/imx7-colibri-rawnand.dts index 4eb86fb011e52694533e9b0251f4eaca8f44ac67..5f12a2ac2a3be9ea7fdae48e5b6370790f8043bc 100644 --- a/arch/arm/dts/imx7-colibri-rawnand.dts +++ b/arch/arm/dts/imx7-colibri-rawnand.dts @@ -13,6 +13,28 @@ chosen { stdout-path = &uart1; }; + + aliases { + usb0 = &usbotg1; /* required for ums */ + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &gpmi { @@ -43,4 +65,30 @@ MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71 >; }; + + pinctrl_usbh_reg: gpio-usbh-vbus { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; +}; + +/* Colibri USBC */ +&usbotg1 { + /* + * usbotg1 on Colibri iMX7 can function in both host/otg modes. + * Gadget stack currently does not look at this at all while + * the host stack refuses to bind/load if it is not set to host + * (it obviously won't be enumerated during usb start invocation + * if dr_mode = "otg") + */ + dr_mode = "host"; + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; + status = "okay"; }; diff --git a/arch/arm/dts/imx6ul-pcl063.dtsi b/arch/arm/dts/pcl063-common.dtsi similarity index 83% rename from arch/arm/dts/imx6ul-pcl063.dtsi rename to arch/arm/dts/pcl063-common.dtsi index 24a6a4798353f395f2a7f6208d3e94005225cda8..2b14b2dc5fa4094a5a5466876e73606a75aed747 100644 --- a/arch/arm/dts/imx6ul-pcl063.dtsi +++ b/arch/arm/dts/pcl063-common.dtsi @@ -7,10 +7,6 @@ * Author: Christian Hemp */ -/dts-v1/; - -#include "imx6ul.dtsi" - / { model = "Phytec phyCORE-i.MX6 Ultra Lite SOM"; compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; @@ -47,7 +43,7 @@ pinctrl-0 = <&pinctrl_gpmi_nand>; nand-on-flash-bbt; fsl,no-blockmark-swap; - status = "okay"; + status = "disabled"; #address-cells = <1>; #size-cells = <1>; @@ -99,6 +95,18 @@ status = "okay"; }; +&usdhc2 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + status = "disabled"; +}; + &iomuxc { pinctrl-names = "default"; @@ -170,4 +178,19 @@ >; }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; }; diff --git a/arch/arm/include/asm/arch-imx/imx-regs.h b/arch/arm/include/asm/arch-imx/imx-regs.h deleted file mode 100644 index 93e336951cd36f2c920687a4e1979399c0e72e61..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/arch-imx/imx-regs.h +++ /dev/null @@ -1,637 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H - -#define ARCH_MXC - -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -# ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -# else -# define __REG(x) (x) -# define __REG2(x,y) ((x)+(y)) -#endif - -#define IMX_IO_BASE 0x00200000 - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define I2C1_BASE_ADDR (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_SYSCTRL_BASE (0x1B800 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* Watchdog Registers*/ - -#define WCR __REG(IMX_WDT_BASE + 0x00) /* Watchdog Control Register */ -#define WSR __REG(IMX_WDT_BASE + 0x04) /* Watchdog Service Register */ -#define WSTR __REG(IMX_WDT_BASE + 0x08) /* Watchdog Status Register */ - -/* SYSCTRL Registers */ -#define SIDR __REG(IMX_SYSCTRL_BASE + 0x4) /* Silicon ID Register */ -#define FMCR __REG(IMX_SYSCTRL_BASE + 0x8) /* Function Multiplex Control Register */ -#define GPCR __REG(IMX_SYSCTRL_BASE + 0xC) /* Function Multiplex Control Register */ - -/* Chip Select Registers */ -#define CS0U __REG(IMX_EIM_BASE) /* Chip Select 0 Upper Register */ -#define CS0L __REG(IMX_EIM_BASE + 0x4) /* Chip Select 0 Lower Register */ -#define CS1U __REG(IMX_EIM_BASE + 0x8) /* Chip Select 1 Upper Register */ -#define CS1L __REG(IMX_EIM_BASE + 0xc) /* Chip Select 1 Lower Register */ -#define CS2U __REG(IMX_EIM_BASE + 0x10) /* Chip Select 2 Upper Register */ -#define CS2L __REG(IMX_EIM_BASE + 0x14) /* Chip Select 2 Lower Register */ -#define CS3U __REG(IMX_EIM_BASE + 0x18) /* Chip Select 3 Upper Register */ -#define CS3L __REG(IMX_EIM_BASE + 0x1c) /* Chip Select 3 Lower Register */ -#define CS4U __REG(IMX_EIM_BASE + 0x20) /* Chip Select 4 Upper Register */ -#define CS4L __REG(IMX_EIM_BASE + 0x24) /* Chip Select 4 Lower Register */ -#define CS5U __REG(IMX_EIM_BASE + 0x28) /* Chip Select 5 Upper Register */ -#define CS5L __REG(IMX_EIM_BASE + 0x2c) /* Chip Select 5 Lower Register */ -#define EIM __REG(IMX_EIM_BASE + 0x30) /* EIM Configuration Register */ - -/* SDRAM controller registers */ - -#define SDCTL0 __REG(IMX_SDRAMC_BASE) /* SDRAM 0 Control Register */ -#define SDCTL1 __REG(IMX_SDRAMC_BASE + 0x4) /* SDRAM 1 Control Register */ -#define SDMISC __REG(IMX_SDRAMC_BASE + 0x14) /* Miscellaneous Register */ -#define SDRST __REG(IMX_SDRAMC_BASE + 0x18) /* SDRAM Reset Register */ - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -/* TODO: define DMA_REQ lines */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * LCD Controller - */ - -#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00) - -#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04) -#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) -#define SIZE_YMAX(y) ( (y) & 0x1ff ) - -#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08) -#define VPW_VPW(x) ( (x) & 0x3ff ) - -#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C) -#define CPOS_CC1 (1<<31) -#define CPOS_CC0 (1<<30) -#define CPOS_OP (1<<28) -#define CPOS_CXP(x) (((x) & 3ff) << 16) -#define CPOS_CYP(y) ((y) & 0x1ff) - -#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10) -#define LCWHB_BK_EN (1<<31) -#define LCWHB_CW(w) (((w) & 0x1f) << 24) -#define LCWHB_CH(h) (((h) & 0x1f) << 16) -#define LCWHB_BD(x) ((x) & 0xff) - -#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14) -#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) -#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) -#define LCHCC_CUR_COL_B(b) ((b) & 0x1f) - -#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18) -#define PCR_TFT (1<<31) -#define PCR_COLOR (1<<30) -#define PCR_PBSIZ_1 (0<<28) -#define PCR_PBSIZ_2 (1<<28) -#define PCR_PBSIZ_4 (2<<28) -#define PCR_PBSIZ_8 (3<<28) -#define PCR_BPIX_1 (0<<25) -#define PCR_BPIX_2 (1<<25) -#define PCR_BPIX_4 (2<<25) -#define PCR_BPIX_8 (3<<25) -#define PCR_BPIX_12 (4<<25) -#define PCR_BPIX_16 (4<<25) -#define PCR_PIXPOL (1<<24) -#define PCR_FLMPOL (1<<23) -#define PCR_LPPOL (1<<22) -#define PCR_CLKPOL (1<<21) -#define PCR_OEPOL (1<<20) -#define PCR_SCLKIDLE (1<<19) -#define PCR_END_SEL (1<<18) -#define PCR_END_BYTE_SWAP (1<<17) -#define PCR_REV_VS (1<<16) -#define PCR_ACD_SEL (1<<15) -#define PCR_ACD(x) (((x) & 0x7f) << 8) -#define PCR_SCLK_SEL (1<<7) -#define PCR_SHARP (1<<6) -#define PCR_PCD(x) ((x) & 0x3f) - -#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C) -#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) -#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) -#define HCR_H_WAIT_2(x) ((x) & 0xff) - -#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20) -#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) -#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) -#define VCR_V_WAIT_2(x) ((x) & 0xff) - -#define LCDC_POS __REG(IMX_LCDC_BASE+0x24) -#define POS_POS(x) ((x) & 1f) - -#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28) -#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) -#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) -#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) -#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) -#define LSCR1_GRAY1(x) (((x) & 0xf)) - -#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C) -#define PWMR_CLS(x) (((x) & 0x1ff) << 16) -#define PWMR_LDMSK (1<<15) -#define PWMR_SCR1 (1<<10) -#define PWMR_SCR0 (1<<9) -#define PWMR_CC_EN (1<<8) -#define PWMR_PW(x) ((x) & 0xff) - -#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30) -#define DMACR_BURST (1<<31) -#define DMACR_HM(x) (((x) & 0xf) << 16) -#define DMACR_TM(x) ((x) &0xf) - -#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34) -#define RMCR_LCDC_EN (1<<1) -#define RMCR_SELF_REF (1<<0) - -#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38) -#define LCDICR_INT_SYN (1<<2) -#define LCDICR_INT_CON (1) - -#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40) -#define LCDISR_UDR_ERR (1<<3) -#define LCDISR_ERR_RES (1<<2) -#define LCDISR_EOF (1<<1) -#define LCDISR_BOF (1<<0) -/* - * UART Module - */ -#define URXD0(x) __REG2( IMX_UART1_BASE + 0x0, ((x) & 1) << 12) /* Receiver Register */ -#define URTX0(x) __REG2( IMX_UART1_BASE + 0x40, ((x) & 1) << 12) /* Transmitter Register */ -#define UCR1(x) __REG2( IMX_UART1_BASE + 0x80, ((x) & 1) << 12) /* Control Register 1 */ -#define UCR2(x) __REG2( IMX_UART1_BASE + 0x84, ((x) & 1) << 12) /* Control Register 2 */ -#define UCR3(x) __REG2( IMX_UART1_BASE + 0x88, ((x) & 1) << 12) /* Control Register 3 */ -#define UCR4(x) __REG2( IMX_UART1_BASE + 0x8c, ((x) & 1) << 12) /* Control Register 4 */ -#define UFCR(x) __REG2( IMX_UART1_BASE + 0x90, ((x) & 1) << 12) /* FIFO Control Register */ -#define USR1(x) __REG2( IMX_UART1_BASE + 0x94, ((x) & 1) << 12) /* Status Register 1 */ -#define USR2(x) __REG2( IMX_UART1_BASE + 0x98, ((x) & 1) << 12) /* Status Register 2 */ -#define UESC(x) __REG2( IMX_UART1_BASE + 0x9c, ((x) & 1) << 12) /* Escape Character Register */ -#define UTIM(x) __REG2( IMX_UART1_BASE + 0xa0, ((x) & 1) << 12) /* Escape Timer Register */ -#define UBIR(x) __REG2( IMX_UART1_BASE + 0xa4, ((x) & 1) << 12) /* BRM Incremental Register */ -#define UBMR(x) __REG2( IMX_UART1_BASE + 0xa8, ((x) & 1) << 12) /* BRM Modulator Register */ -#define UBRC(x) __REG2( IMX_UART1_BASE + 0xac, ((x) & 1) << 12) /* Baud Rate Count Register */ -#define BIPR1(x) __REG2( IMX_UART1_BASE + 0xb0, ((x) & 1) << 12) /* Incremental Preset Register 1 */ -#define BIPR2(x) __REG2( IMX_UART1_BASE + 0xb4, ((x) & 1) << 12) /* Incremental Preset Register 2 */ -#define BIPR3(x) __REG2( IMX_UART1_BASE + 0xb8, ((x) & 1) << 12) /* Incremental Preset Register 3 */ -#define BIPR4(x) __REG2( IMX_UART1_BASE + 0xbc, ((x) & 1) << 12) /* Incremental Preset Register 4 */ -#define BMPR1(x) __REG2( IMX_UART1_BASE + 0xc0, ((x) & 1) << 12) /* BRM Modulator Register 1 */ -#define BMPR2(x) __REG2( IMX_UART1_BASE + 0xc4, ((x) & 1) << 12) /* BRM Modulator Register 2 */ -#define BMPR3(x) __REG2( IMX_UART1_BASE + 0xc8, ((x) & 1) << 12) /* BRM Modulator Register 3 */ -#define BMPR4(x) __REG2( IMX_UART1_BASE + 0xcc, ((x) & 1) << 12) /* BRM Modulator Register 4 */ -#define UTS(x) __REG2( IMX_UART1_BASE + 0xd0, ((x) & 1) << 12) /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - -/* General purpose timers registers */ -#define TCTL1 __REG(IMX_TIM1_BASE) -#define TPRER1 __REG(IMX_TIM1_BASE + 0x4) -#define TCMP1 __REG(IMX_TIM1_BASE + 0x8) -#define TCR1 __REG(IMX_TIM1_BASE + 0xc) -#define TCN1 __REG(IMX_TIM1_BASE + 0x10) -#define TSTAT1 __REG(IMX_TIM1_BASE + 0x14) -#define TCTL2 __REG(IMX_TIM2_BASE) -#define TPRER2 __REG(IMX_TIM2_BASE + 0x4) -#define TCMP2 __REG(IMX_TIM2_BASE + 0x8) -#define TCR2 __REG(IMX_TIM2_BASE + 0xc) -#define TCN2 __REG(IMX_TIM2_BASE + 0x10) -#define TSTAT2 __REG(IMX_TIM2_BASE + 0x14) - -/* General purpose timers bitfields */ -#define TCTL_SWR (1<<15) /* Software reset */ -#define TCTL_FRR (1<<8) /* Freerun / restart */ -#define TCTL_CAP (3<<6) /* Capture Edge */ -#define TCTL_OM (1<<5) /* output mode */ -#define TCTL_IRQEN (1<<4) /* interrupt enable */ -#define TCTL_CLKSOURCE (7<<1) /* Clock source */ -#define TCTL_TEN (1) /* Timer enable */ -#define TPRER_PRES (0xff) /* Prescale */ -#define TSTAT_CAPT (1<<1) /* Capture event */ -#define TSTAT_COMP (1) /* Compare event */ - -#endif /* _IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-imx8/imx-regs.h b/arch/arm/include/asm/arch-imx8/imx-regs.h index af0fb5154b61a7293890f6239aafdd0564b3e42f..6333ff4686fe68fee2be1b2bc2ad0a0f77f54191 100644 --- a/arch/arm/include/asm/arch-imx8/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8/imx-regs.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARCH_IMX8_REGS_H__ #define __ASM_ARCH_IMX8_REGS_H__ +#define ARCH_MXC + #define LPUART_BASE 0x5A060000 #define GPT1_BASE_ADDR 0x5D140000 diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index 3facd5450c01b80f10cc914f336a9052f7684c86..68666a535b9cb93afbfef2dec6c6ddc9fcda2ff4 100644 --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARCH_IMX8M_REGS_H__ #define __ASM_ARCH_IMX8M_REGS_H__ +#define ARCH_MXC + #include #define ROM_VERSION_A0 0x800 diff --git a/arch/arm/include/asm/arch-mx7/clock.h b/arch/arm/include/asm/arch-mx7/clock.h index f56564ea6fc7e999159db42f3847f76d2fd28036..1d07fde5432d7e7c487ef461a4183a35967d49e2 100644 --- a/arch/arm/include/asm/arch-mx7/clock.h +++ b/arch/arm/include/asm/arch-mx7/clock.h @@ -175,6 +175,24 @@ enum clk_root_index { CLK_ROOT_MAX, }; +#if (CONFIG_CONS_INDEX == 0) +#define UART_CLK_ROOT UART1_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 1) +#define UART_CLK_ROOT UART2_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 2) +#define UART_CLK_ROOT UART3_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 3) +#define UART_CLK_ROOT UART4_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 4) +#define UART_CLK_ROOT UART5_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 5) +#define UART_CLK_ROOT UART6_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 6) +#define UART_CLK_ROOT UART7_CLK_ROOT +#else +#error "Invalid IMX UART ID for serial console is defined" +#endif + struct clk_root_setting { enum clk_root_index root; u32 setting; diff --git a/arch/arm/include/asm/arch-mx7ulp/imx-regs.h b/arch/arm/include/asm/arch-mx7ulp/imx-regs.h index bf9f39aca23dcc0a1a42ccf6f20e3e8236cbc320..63b02de0878b25e31a66082c353ca6f5374f8e3b 100644 --- a/arch/arm/include/asm/arch-mx7ulp/imx-regs.h +++ b/arch/arm/include/asm/arch-mx7ulp/imx-regs.h @@ -8,6 +8,8 @@ #include +#define ARCH_MXC + #define CAAM_SEC_SRAM_BASE (0x26000000) #define CAAM_SEC_SRAM_SIZE (SZ_32K) #define CAAM_SEC_SRAM_END (CAAM_SEC_SRAM_BASE + CAAM_SEC_SRAM_SIZE - 1) diff --git a/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S b/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S new file mode 100644 index 0000000000000000000000000000000000000000..bcc804b58fab7d2585369ff8420e0f46ca06d81f --- /dev/null +++ b/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#include + +#define ROM_API_TABLE_BASE_ADDR_LEGACY 0x180 +#define ROM_VERSION_OFFSET 0x80 +#define ROM_API_HWCNFG_SETUP_OFFSET 0x08 + +plugin_start: + + push {r0-r4, lr} + + imx7ulp_ddr_setting + imx7ulp_clock_gating + imx7ulp_qos_setting + +normal_boot: + +/* + * The following is to fill in those arguments for this ROM function + * pu_irom_hwcnfg_setup(void **start, size_t *bytes, const void *boot_data) + * This function is used to copy data from the storage media into DDR. + * start - Initial (possibly partial) image load address on entry. + * Final image load address on exit. + * bytes - Initial (possibly partial) image size on entry. + * Final image size on exit. + * boot_data - Initial @ref ivt Boot Data load address. + */ + adr r0, boot_data2 + adr r1, image_len2 + adr r2, boot_data2 + +/* + * check the _pu_irom_api_table for the address + */ +before_calling_rom___pu_irom_hwcnfg_setup: + ldr r3, =ROM_VERSION_OFFSET + ldr r4, [r3] + ldr r3, =ROM_API_TABLE_BASE_ADDR_LEGACY + ldr r4, [r3, #ROM_API_HWCNFG_SETUP_OFFSET] + blx r4 +after_calling_rom___pu_irom_hwcnfg_setup: + +/* + * To return to ROM from plugin, we need to fill in these argument. + * Here is what need to do: + * Need to construct the parameters for this function before return to ROM: + * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset) + */ + pop {r0-r4, lr} + push {r5} + ldr r5, boot_data2 + str r5, [r0] + ldr r5, image_len2 + str r5, [r1] + ldr r5, second_ivt_offset + str r5, [r2] + mov r0, #1 + pop {r5} + + /* return back to ROM code */ + bx lr + +/* make the following data right in the end of the output*/ +.ltorg + +#define FLASH_OFFSET 0x400 + +/* + * second_ivt_offset is the offset from the "second_ivt_header" to + * "image_copy_start", which involves FLASH_OFFSET, plus the first + * ivt_header, the plugin code size itself recorded by "ivt2_header" + */ + +second_ivt_offset: .long (ivt2_header + 0x2C + FLASH_OFFSET) + +/* + * The following is the second IVT header plus the second boot data + */ +ivt2_header: .long 0x0 +app2_code_jump_v: .long 0x0 +reserv3: .long 0x0 +dcd2_ptr: .long 0x0 +boot_data2_ptr: .long 0x0 +self_ptr2: .long 0x0 +app_code_csf2: .long 0x0 +reserv4: .long 0x0 +boot_data2: .long 0x0 +image_len2: .long 0x0 +plugin2: .long 0x0 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ec09ef240feedb6326460c08efe5d89b71500f95..b6fd1595f0463db4ff36cebdec166bf069bfec5d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -29,7 +29,7 @@ config IMX_BOOTAUX config USE_IMXIMG_PLUGIN bool "Use imximage plugin code" - depends on ARCH_MX7 || ARCH_MX6 + depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX7ULP help i.MX6/7 supports DCD and Plugin. Enable this configuration to use Plugin, otherwise DCD will be used. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index c46984994a182f43daec361a69ca8f82f8141c0b..898478fc4a40e8156155748daf210d2bf8a70f9c 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -92,7 +92,9 @@ IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%) ifeq ($(CONFIG_ARCH_IMX8), y) CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh IMAGE_TYPE := imx8image +ifeq ($(CONFIG_SPL_BUILD),y) SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi) +endif DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi) else ifeq ($(CONFIG_ARCH_IMX8M), y) IMAGE_TYPE := imx8mimage @@ -110,7 +112,16 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE $(call if_changed,mkimage) -ifeq ($(CONFIG_OF_SEPARATE),y) +ifeq ($(CONFIG_MULTI_DTB_FIT),y) +MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ + -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE) +u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log + +u-boot-dtb.imx: u-boot-fit-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE +ifeq ($(DEPFILE_EXISTS),0) + $(call if_changed,mkimage) +endif +else ifeq ($(CONFIG_OF_SEPARATE),y) MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE) u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 64a0670fcf62aa277931548e9b26f32267b646a4..d62ff6ef25df70a3e48cebb0bf3a567738ec8e46 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -285,7 +285,7 @@ u32 get_ahb_clk(void) void arch_preboot_os(void) { -#if defined(CONFIG_PCIE_IMX) +#if defined(CONFIG_PCIE_IMX) && !CONFIG_IS_ENABLED(DM_PCI) imx_pcie_remove(); #endif #if defined(CONFIG_SATA) diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index c32f7dbb61e5292353809eb1d37f09c252c6d2f0..bbe323d5ca4a18abff3b506115c7e5b60b8b4028 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -27,8 +27,13 @@ choice prompt "i.MX8 board select" optional -config TARGET_IMX8QXP_MEK - bool "Support i.MX8QXP MEK board" +config TARGET_APALIS_IMX8 + bool "Support Apalis iMX8 module" + select BOARD_LATE_INIT + select IMX8QM + +config TARGET_COLIBRI_IMX8X + bool "Support Colibri iMX8X module" select BOARD_LATE_INIT select IMX8QXP @@ -37,9 +42,16 @@ config TARGET_IMX8QM_MEK select BOARD_LATE_INIT select IMX8QM +config TARGET_IMX8QXP_MEK + bool "Support i.MX8QXP MEK board" + select BOARD_LATE_INIT + select IMX8QXP + endchoice -source "board/freescale/imx8qxp_mek/Kconfig" source "board/freescale/imx8qm_mek/Kconfig" +source "board/freescale/imx8qxp_mek/Kconfig" +source "board/toradex/apalis-imx8/Kconfig" +source "board/toradex/colibri-imx8x/Kconfig" endif diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 53f9a8735ad6dcd41bc38fc851019879c655a73a..f2fa262ac8981cee91253bbc42283121c5a155b9 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -573,15 +574,50 @@ const char *get_core_name(void) return "?"; } +#if IS_ENABLED(CONFIG_IMX_SCU_THERMAL) +static int cpu_imx_get_temp(void) +{ + struct udevice *thermal_dev; + int cpu_tmp, ret; + + ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal0", + &thermal_dev); + + if (!ret) { + ret = thermal_get_temp(thermal_dev, &cpu_tmp); + if (ret) + return 0xdeadbeef; + } else { + return 0xdeadbeef; + } + + return cpu_tmp; +} +#else +static int cpu_imx_get_temp(void) +{ + return 0; +} +#endif + int cpu_imx_get_desc(struct udevice *dev, char *buf, int size) { struct cpu_imx_platdata *plat = dev_get_platdata(dev); + int ret; if (size < 100) return -ENOSPC; - snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz\n", - plat->type, plat->rev, plat->name, plat->freq_mhz); + ret = snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz", + plat->type, plat->rev, plat->name, plat->freq_mhz); + + if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) { + buf = buf + ret; + size = size - ret; + ret = snprintf(buf, size, " at %dC", cpu_imx_get_temp()); + } + + snprintf(buf + ret, size - ret, "\n"); return 0; } @@ -623,8 +659,10 @@ static ulong imx8_get_cpu_rate(void) { ulong rate; int ret; + int type = is_cortex_a35() ? SC_R_A35 : is_cortex_a53() ? + SC_R_A53 : SC_R_A72; - ret = sc_pm_get_clock_rate(-1, SC_R_A35, SC_PM_CLK_CPU, + ret = sc_pm_get_clock_rate(-1, type, SC_PM_CLK_CPU, (sc_pm_clock_rate_t *)&rate); if (ret) { printf("Could not read CPU frequency: %d\n", ret); diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index f513c4c06f770db719817b253fd573e24d717da5..fe5991e7c6db7b264b5edeea3d3f65e46262af4f 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -455,6 +455,18 @@ config TARGET_PCL063 select DM_THERMAL select SUPPORT_SPL +config TARGET_PCL063_ULL + bool "PHYTEC PCL063 (phyCORE-i.MX6ULL)" + select MX6ULL + select DM + select DM_ETH + select DM_GPIO + select DM_I2C + select DM_MMC + select DM_SERIAL + select DM_THERMAL + select SUPPORT_SPL + config TARGET_SECOMX6 bool "secomx6 boards" @@ -498,8 +510,8 @@ config TARGET_UDOO_NEO select SUPPORT_SPL imply CMD_DM -config TARGET_SAMTEC_VINING_2000 - bool "samtec VIN|ING 2000" +config TARGET_SOFTING_VINING_2000 + bool "Softing VIN|ING 2000" select BOARD_LATE_INIT select DM select DM_THERMAL @@ -580,7 +592,7 @@ source "board/phytec/pfla02/Kconfig" source "board/phytec/pcl063/Kconfig" source "board/gateworks/gw_ventana/Kconfig" source "board/kosagi/novena/Kconfig" -source "board/samtec/vining_2000/Kconfig" +source "board/softing/vining_2000/Kconfig" source "board/liebherr/display5/Kconfig" source "board/liebherr/mccmon6/Kconfig" source "board/logicpd/imx6/Kconfig" diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c index 94a3d71201723b7cab7561efc9a0b2c47c18effb..264fa8a48e35c1e83b63f2848e0e82ff193193bf 100644 --- a/arch/arm/mach-imx/mx6/opos6ul.c +++ b/arch/arm/mach-imx/mx6/opos6ul.c @@ -192,6 +192,8 @@ struct mx6_ddr_sysinfo ddr_sysinfo = { .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ .ddr_type = DDR_TYPE_DDR3, + .refsel = 1, /* Refresh cycles at 32KHz */ + .refr = 7, /* 8 refreshes commands per refresh cycle */ }; static struct mx6_ddr3_cfg mem_ddr = { diff --git a/arch/arm/mach-imx/mx7/clock.c b/arch/arm/mach-imx/mx7/clock.c index 8cda71cf55bee61738a406b9034ff76c9897bc09..e364b162d922cac9fa23cb02d65b814401fa9549 100644 --- a/arch/arm/mach-imx/mx7/clock.c +++ b/arch/arm/mach-imx/mx7/clock.c @@ -53,7 +53,7 @@ static u32 get_ipg_clk(void) u32 imx_get_uartclk(void) { - return get_root_clk(UART1_CLK_ROOT); + return get_root_clk(UART_CLK_ROOT); } u32 imx_get_fecclk(void) diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 4a914fca5e5a68b84286b15fc6a95f7941c09e38..1b4bbc503733eb2c3c461aa1abf3126a869130c4 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -164,15 +164,6 @@ u32 __weak get_board_rev(void) } #endif -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -/* enable all periherial can be accessed in nosec mode */ -static void init_csu(void) -{ - int i = 0; - for (i = 0; i < CSU_NUM_REGS; i++) - writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4); -} - static void imx_enet_mdio_fixup(void) { struct iomuxc_gpr_base_regs *gpr_regs = @@ -191,6 +182,26 @@ static void imx_enet_mdio_fixup(void) } } +static void init_cpu_basic(void) +{ + imx_enet_mdio_fixup(); + +#ifdef CONFIG_APBH_DMA + /* Start APBH DMA */ + mxs_dma_init(); +#endif +} + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +/* enable all periherial can be accessed in nosec mode */ +static void init_csu(void) +{ + int i = 0; + + for (i = 0; i < CSU_NUM_REGS; i++) + writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4); +} + static void imx_gpcv2_init(void) { u32 val, i; @@ -269,12 +280,7 @@ int arch_cpu_init(void) /* Disable PDE bit of WMCR register */ imx_wdog_disable_powerdown(); - imx_enet_mdio_fixup(); - -#ifdef CONFIG_APBH_DMA - /* Start APBH DMA */ - mxs_dma_init(); -#endif + init_cpu_basic(); #if CONFIG_IS_ENABLED(IMX_RDC) isolate_resource(); @@ -286,6 +292,13 @@ int arch_cpu_init(void) return 0; } +#else +int arch_cpu_init(void) +{ + init_cpu_basic(); + + return 0; +} #endif #ifdef CONFIG_ARCH_MISC_INIT diff --git a/board/armadeus/opos6uldev/board.c b/board/armadeus/opos6uldev/board.c index 4faa9971260201fd04913be7f203c52e680b65a5..aed334f8fb5fbec52fef925de6f640397673d51e 100644 --- a/board/armadeus/opos6uldev/board.c +++ b/board/armadeus/opos6uldev/board.c @@ -3,7 +3,6 @@ * Copyright (C) 2018 Armadeus Systems */ -#include #include #include #include @@ -49,8 +48,6 @@ int setup_lcd(void) struct gpio_desc backlight; int ret; - enable_lcdif_clock(LCDIF1_BASE_ADDR, 1); - imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); /* Set Brightness to high */ diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index f9ac5c10e1dc954b64605a1c4f84a6c819d183a7..50e3cb50a3594fbd825dccb170e57dfe1a351c73 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -6,6 +6,8 @@ */ #include +#include +#include #include #include #include @@ -18,6 +20,8 @@ #include #include #include +#include +#include #include #include #include @@ -167,6 +171,9 @@ int board_eth_init(bd_t *bis) struct mii_dev *bus = NULL; struct phy_device *phydev = NULL; + gpio_request(IMX_GPIO_NR(5, 0), "PHY-reset"); + gpio_request(IMX_GPIO_NR(1, 7), "VIO"); + setup_fec_clock(); eth_phy_reset(); @@ -186,64 +193,10 @@ int board_eth_init(bd_t *bis) } #endif -#ifdef CONFIG_FSL_ESDHC - -#define USDHC2_CD_GPIO IMX_GPIO_NR(6, 16) -#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 8) - -static struct fsl_esdhc_cfg usdhc_cfg[3] = { - { USDHC2_BASE_ADDR }, - { USDHC3_BASE_ADDR }, - { USDHC4_BASE_ADDR }, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - - switch (cfg->esdhc_base) { - case USDHC2_BASE_ADDR: - return gpio_get_value(USDHC2_CD_GPIO); - case USDHC3_BASE_ADDR: - return !gpio_get_value(USDHC3_CD_GPIO); - case USDHC4_BASE_ADDR: - return 1; /* eMMC/uSDHC4 is always present */ - } - - return 0; -} - -int board_mmc_init(bd_t *bis) -{ - int i, ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 SD interface - * mmc1 micro SD - * mmc2 eMMC - */ - gpio_direction_input(USDHC2_CD_GPIO); - gpio_direction_input(USDHC3_CD_GPIO); - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) - return ret; - } - - return 0; -} -#endif - #ifdef CONFIG_USB_EHCI_MX6 static void setup_usb(void) { + gpio_request(IMX_GPIO_NR(3, 31), "USB-VBUS"); /* * Set daisy chain for otg_pin_id on MX6Q. * For MX6DL, this bit is reserved. @@ -319,16 +272,6 @@ int board_early_init_f(void) return 0; } -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - if (bus == 0 && cs == 0) - return IMX_GPIO_NR(2, 30); - else - return -1; -} -#endif - int board_init(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -351,10 +294,6 @@ int board_init(void) } #endif -#ifdef CONFIG_SATA - setup_sata(); -#endif - setup_dhcom_mac_from_fuse(); return 0; @@ -379,6 +318,10 @@ static int board_get_hwcode(void) { int hw_code; + gpio_request(HW_CODE_BIT_0, "HW-code-bit-0"); + gpio_request(HW_CODE_BIT_1, "HW-code-bit-1"); + gpio_request(HW_CODE_BIT_2, "HW-code-bit-2"); + gpio_direction_input(HW_CODE_BIT_0); gpio_direction_input(HW_CODE_BIT_1); gpio_direction_input(HW_CODE_BIT_2); diff --git a/board/freescale/imx8mq_evk/spl.c b/board/freescale/imx8mq_evk/spl.c index e6cbc34b0d11258cb35fe825890e617bc32e97fd..3c0ff0bb1b3acf70d6fcd8447fa87d12933ab4c2 100644 --- a/board/freescale/imx8mq_evk/spl.c +++ b/board/freescale/imx8mq_evk/spl.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; extern struct dram_timing_info dram_timing_b0; -void spl_dram_init(void) +static void spl_dram_init(void) { /* ddr init */ if ((get_cpu_rev() & 0xfff) == CHIP_REV_2_1) @@ -38,7 +38,7 @@ void spl_dram_init(void) #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC, .gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC, diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 385a18e923fb1ee192323019393bdb3d3c610957..cdfc5ff77f2789530b9ecb599cd5c36960f5c855 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -287,49 +287,6 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { -#ifndef CONFIG_SPL_BUILD - int ret; - int i; - - /* - * According to the board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 SD2 - * mmc1 SD3 - * mmc2 eMMC - */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - SETUP_IOMUX_PADS(usdhc2_pads); - gpio_request(USDHC2_CD_GPIO, "USDHC2 CD"); - gpio_direction_input(USDHC2_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - break; - case 1: - SETUP_IOMUX_PADS(usdhc3_pads); - gpio_request(USDHC3_CD_GPIO, "USDHC3 CD"); - gpio_direction_input(USDHC3_CD_GPIO); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - case 2: - SETUP_IOMUX_PADS(usdhc4_pads); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) then supported by the board (%d)\n", - i + 1, CONFIG_SYS_FSL_USDHC_NUM); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) - return ret; - } - - return 0; -#else struct src *psrc = (struct src *)SRC_BASE_ADDR; unsigned reg = readl(&psrc->sbmr1) >> 11; /* @@ -363,7 +320,6 @@ int board_mmc_init(bd_t *bis) } return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -#endif } #endif diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c index 9f2586521d4a9bac793cf615e5177cfb67710ff8..78294b820e5e82bf982f2c3f9fabf47f35c961ea 100644 --- a/board/kosagi/novena/novena.c +++ b/board/kosagi/novena/novena.c @@ -6,6 +6,9 @@ */ #include +#include +#include +#include #include #include #include @@ -20,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -35,6 +39,7 @@ #include #include #include +#include #include "novena.h" @@ -83,6 +88,8 @@ int drv_keyboard_init(void) .tstc = novena_gpio_button_tstc, }; + gpio_request(NOVENA_BUTTON_GPIO, "button"); + error = input_init(&button_input, 0); if (error) { debug("%s: Cannot set up input\n", __func__); @@ -99,60 +106,6 @@ int drv_keyboard_init(void) } #endif -/* - * SDHC - */ -#ifdef CONFIG_FSL_ESDHC -static struct fsl_esdhc_cfg usdhc_cfg[] = { - { USDHC3_BASE_ADDR, 0, 4 }, /* Micro SD */ - { USDHC2_BASE_ADDR, 0, 4 }, /* Big SD */ -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - - /* There is no CD for a microSD card, assume always present. */ - if (cfg->esdhc_base == USDHC3_BASE_ADDR) - return 1; - else - return !gpio_get_value(NOVENA_SD_CD); -} - -int board_mmc_getwp(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - - /* There is no WP for a microSD card, assume always read-write. */ - if (cfg->esdhc_base == USDHC3_BASE_ADDR) - return 0; - else - return gpio_get_value(NOVENA_SD_WP); -} - - -int board_mmc_init(bd_t *bis) -{ - s32 status = 0; - int index; - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - - /* Big SD write-protect and card-detect */ - gpio_direction_input(NOVENA_SD_WP); - gpio_direction_input(NOVENA_SD_CD); - - for (index = 0; index < ARRAY_SIZE(usdhc_cfg); index++) { - status = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); - if (status) - return status; - } - - return status; -} -#endif - int board_early_init_f(void) { #if defined(CONFIG_VIDEO_IPUV3) @@ -167,17 +120,25 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -#ifdef CONFIG_SATA - setup_sata(); -#endif - return 0; } int board_late_init(void) { #if defined(CONFIG_VIDEO_IPUV3) + struct udevice *con; + char buf[DISPLAY_OPTIONS_BANNER_LENGTH]; + int ret; + setup_display_lvds(); + + ret = uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con); + if (ret) + return ret; + + display_options_get_banner(false, buf, sizeof(buf)); + vidconsole_position_cursor(con, 0, 0); + vidconsole_put_string(con, buf); #endif return 0; } diff --git a/board/kosagi/novena/video.c b/board/kosagi/novena/video.c index f1351b9e287c7019aaf9f51e5a04d82c2c8f46fd..7083b6e103f58e8acdd0ed7a22c75fb50059dcb2 100644 --- a/board/kosagi/novena/video.c +++ b/board/kosagi/novena/video.c @@ -270,6 +270,7 @@ static void enable_lvds(struct display_info_t const *dev) return; /* ITE IT6251 power enable. */ + gpio_request(NOVENA_ITE6251_PWR_GPIO, "ite6251-power"); gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 0); mdelay(10); gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 1); @@ -447,6 +448,8 @@ void setup_display_lvds(void) /* Init the LVDS-to-eDP chip and if it succeeded, enable backlight. */ ret = it6251_init(); if (!ret) { + gpio_request(NOVENA_BACKLIGHT_PWR_GPIO, "backlight-power"); + gpio_request(NOVENA_BACKLIGHT_PWM_GPIO, "backlight-pwm"); /* Backlight power enable. */ gpio_direction_output(NOVENA_BACKLIGHT_PWR_GPIO, 1); /* PWM backlight pin, always on for full brightness. */ diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c index b17a3b1d39634324a60562fd9d227b1c529df5fd..53e609e15cf9d8d3eff099d0160d539433a44666 100644 --- a/board/logicpd/imx6/imx6logic.c +++ b/board/logicpd/imx6/imx6logic.c @@ -152,7 +152,8 @@ int board_late_init(void) if (is_mx6dq()) { env_set("board_rev", "MX6DQ"); - env_set("fdt_file", "imx6q-logicpd.dtb"); + if (!env_get("fdt_file")) + env_set("fdt_file", "imx6q-logicpd.dtb"); } return 0; diff --git a/board/phytec/pcl063/Kconfig b/board/phytec/pcl063/Kconfig index 977db70f6419f103290501e7a30c1662fe6770f7..58f72f2791230f3a754e441c99f13933be247bfd 100644 --- a/board/phytec/pcl063/Kconfig +++ b/board/phytec/pcl063/Kconfig @@ -10,3 +10,16 @@ config SYS_CONFIG_NAME default "pcl063" endif + +if TARGET_PCL063_ULL + +config SYS_BOARD + default "pcl063" + +config SYS_VENDOR + default "phytec" + +config SYS_CONFIG_NAME + default "pcl063_ull" + +endif diff --git a/board/phytec/pcl063/MAINTAINERS b/board/phytec/pcl063/MAINTAINERS index c65a951f3dd5583f7516341c21920da37e0c8b1b..710b9680d4147a7429ccd0d41e1f01faca3c3510 100644 --- a/board/phytec/pcl063/MAINTAINERS +++ b/board/phytec/pcl063/MAINTAINERS @@ -1,8 +1,14 @@ PCL063 BOARD M: Martyn Welch +M: Parthiban Nallathambi S: Maintained F: arch/arm/dts/imx6ul-pcl063.dtsi F: arch/arm/dts/imx6ul-phycore-segin.dts +F: arch/arm/dts/imx6ull-phycore-segin.dts +F: arch/arm/dts/pcl063-common.dtsi +F: arch/arm/dts/imx6ull-u-boot.dtsi F: board/phytec/pcl063/ F: configs/phycore_pcl063_defconfig +F: configs/phycore_pcl063_ull_defconfig F: include/configs/pcl063.h +F: include/configs/pcl063_ull.h diff --git a/board/phytec/pcl063/pcl063.c b/board/phytec/pcl063/pcl063.c index 38b233d1b07ba354522079937ebb238463565c2c..17012df0374546c7d1cc4e78dea4ec6bd2fa68ce 100644 --- a/board/phytec/pcl063/pcl063.c +++ b/board/phytec/pcl063/pcl063.c @@ -200,7 +200,10 @@ int board_init(void) int checkboard(void) { - puts("Board: PHYTEC phyCORE-i.MX6UL\n"); + u32 cpurev = get_cpu_rev(); + + printf("Board: PHYTEC phyCORE-i.MX%s\n", + get_imx_type((cpurev & 0xFF000) >> 12)); return 0; } diff --git a/board/phytec/pcl063/spl.c b/board/phytec/pcl063/spl.c index b93cd493f21dc27d04b153399f36b650e1aadbe6..73a774645d9e44d6d2e9f1f1b1b38111e80f9771 100644 --- a/board/phytec/pcl063/spl.c +++ b/board/phytec/pcl063/spl.c @@ -13,6 +13,7 @@ #include #include #include +#include #include /* Configuration for Micron MT41K256M16TW-107 IT:P, 32M x 16 x 8 -> 256MiB */ @@ -117,11 +118,32 @@ static iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_UART1_RTS_B__USDHC1_CD_B | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; +#ifndef CONFIG_NAND_MXS +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; +#endif + static struct fsl_esdhc_cfg usdhc_cfg[] = { { .esdhc_base = USDHC1_BASE_ADDR, .max_bus_width = 4, }, +#ifndef CONFIG_NAND_MXS + { + .esdhc_base = USDHC2_BASE_ADDR, + .max_bus_width = 8, + }, +#endif }; int board_mmc_getcd(struct mmc *mmc) @@ -131,12 +153,58 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { - imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + int i, ret; + + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + SETUP_IOMUX_PADS(usdhc1_pads); + usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; +#ifndef CONFIG_NAND_MXS + case 1: + SETUP_IOMUX_PADS(usdhc2_pads); + usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; +#endif + default: + printf("Warning - USDHC%d controller not supporting\n", + i + 1); + return 0; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) { + printf("Warning: failed to initialize mmc dev %d\n", i); + return ret; + } + } + + return 0; } +void board_boot_order(u32 *spl_boot_list) +{ + u32 bmode = imx6_src_get_boot_mode(); + u8 boot_dev = BOOT_DEVICE_MMC1; + + switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) { + case IMX6_BMODE_SD: + case IMX6_BMODE_ESD: + boot_dev = BOOT_DEVICE_MMC1; + break; + case IMX6_BMODE_MMC: + case IMX6_BMODE_EMMC: + boot_dev = BOOT_DEVICE_MMC2; + break; + default: + /* Default - BOOT_DEVICE_MMC1 */ + printf("Wrong board boot order\n"); + break; + } + + spl_boot_list[0] = boot_dev; +} #endif /* CONFIG_FSL_ESDHC */ void board_init_f(ulong dummy) diff --git a/board/samtec/vining_2000/Kconfig b/board/softing/vining_2000/Kconfig similarity index 69% rename from board/samtec/vining_2000/Kconfig rename to board/softing/vining_2000/Kconfig index 3447c27fa4f42e2163a1f29f09690fe8ba98c2d6..90d45a7f6e85d531799daf91aeef0120188247ab 100644 --- a/board/samtec/vining_2000/Kconfig +++ b/board/softing/vining_2000/Kconfig @@ -1,10 +1,10 @@ -if TARGET_SAMTEC_VINING_2000 +if TARGET_SOFTING_VINING_2000 config SYS_BOARD default "vining_2000" config SYS_VENDOR - default "samtec" + default "softing" config SYS_CONFIG_NAME default "vining_2000" diff --git a/board/samtec/vining_2000/MAINTAINERS b/board/softing/vining_2000/MAINTAINERS similarity index 57% rename from board/samtec/vining_2000/MAINTAINERS rename to board/softing/vining_2000/MAINTAINERS index 027e52736fa7b874c619c890abd0ec06a1a60008..0df78c6b951becc0512195be535e84b1c20a2857 100644 --- a/board/samtec/vining_2000/MAINTAINERS +++ b/board/softing/vining_2000/MAINTAINERS @@ -1,6 +1,6 @@ VINING_2000 BOARD -M: Ingo Schroeck +M: Silvio Fricke S: Maintained -F: board/samtec/vining_2000/ +F: board/softing/vining_2000/ F: include/configs/vining_2000.h F: configs/vining_2000_defconfig diff --git a/board/samtec/vining_2000/Makefile b/board/softing/vining_2000/Makefile similarity index 67% rename from board/samtec/vining_2000/Makefile rename to board/softing/vining_2000/Makefile index 9650da711d9da52aca311fbe79c1b6c105b51c9d..84f66a67b520879983fb70aa6ac7e7a3eef05b65 100644 --- a/board/samtec/vining_2000/Makefile +++ b/board/softing/vining_2000/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+ # (C) Copyright 2016 samtec automotive software & electronics gmbh +# Copyright (C) 2017-2019 softing automotive electronics gmbH obj-y := vining_2000.o diff --git a/board/samtec/vining_2000/imximage.cfg b/board/softing/vining_2000/imximage.cfg similarity index 97% rename from board/samtec/vining_2000/imximage.cfg rename to board/softing/vining_2000/imximage.cfg index 3e4fcad8ea168862a423a8809971c49d5bc041d1..f6f59ddf55c26e55915e975a7cca04dc965cc0d6 100644 --- a/board/samtec/vining_2000/imximage.cfg +++ b/board/softing/vining_2000/imximage.cfg @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2016 samtec automotive software & electronics gmbh + * Copyright (C) 2017-2019 softing automotive electronics gmbH */ #define __ASSEMBLY__ diff --git a/board/samtec/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c similarity index 78% rename from board/samtec/vining_2000/vining_2000.c rename to board/softing/vining_2000/vining_2000.c index f37365c5cb9013849f265fb7f51d9b4599ac91f8..19b9b3727610f7db7bd27a4b72e0c0010f3d8ce6 100644 --- a/board/samtec/vining_2000/vining_2000.c +++ b/board/softing/vining_2000/vining_2000.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 samtec automotive software & electronics gmbh + * Copyright (C) 2017-2019 softing automotive electronics gmbH * * Author: Christoph Fritz */ @@ -57,6 +58,9 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_80ohm | \ PAD_CTL_SRE_FAST) +#define USDHC_RESET_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_80ohm) + #define GPIO_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ PAD_CTL_PKE) @@ -67,34 +71,6 @@ int dram_init(void) return 0; } -static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc2_pads[] = { - MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_CLK_PAD_CTRL), - MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_LCD1_VSYNC__GPIO3_IO_28 | MUX_PAD_CTRL(GPIO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { - MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_CLK_PAD_CTRL), - MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - static iomux_v3_cfg_t const fec1_pads[] = { MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -116,11 +92,6 @@ static iomux_v3_cfg_t const pwm_led_pads[] = { MX6_PAD_RGMII2_RD3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* blue */ }; -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); -} - #define PHY_RESET IMX_GPIO_NR(5, 9) int board_eth_init(bd_t *bis) @@ -152,6 +123,7 @@ int board_eth_init(bd_t *bis) goto eth_fail; /* reset phy */ + gpio_request(PHY_RESET, "PHY-reset"); gpio_direction_output(PHY_RESET, 0); mdelay(16); gpio_set_value(PHY_RESET, 1); @@ -437,66 +409,11 @@ int board_late_init(void) int board_early_init_f(void) { - setup_iomux_uart(); - setup_iomux_usb(); return 0; } -static struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC4_BASE_ADDR, 0, 8}, - {USDHC2_BASE_ADDR, 0, 4}, -}; - -#define USDHC2_CD_GPIO IMX_GPIO_NR(3, 28) - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - - if (cfg->esdhc_base == USDHC4_BASE_ADDR) - return 1; - if (cfg->esdhc_base == USDHC2_BASE_ADDR) - return !gpio_get_value(USDHC2_CD_GPIO); - - return -EINVAL; -} - -int board_mmc_init(bd_t *bis) -{ - int ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 USDHC4 - * mmc1 USDHC2 - */ - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - gpio_direction_input(USDHC2_CD_GPIO); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]); - if (ret) { - printf("Warning: failed to initialize USDHC4\n"); - return ret; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[1]); - if (ret) { - printf("Warning: failed to initialize USDHC2\n"); - return ret; - } - - return 0; -} - int board_init(void) { /* Address of boot parameters */ diff --git a/board/technexion/pico-imx6ul/MAINTAINERS b/board/technexion/pico-imx6ul/MAINTAINERS index b8f3d24a532f276760d8b80885f4d39dbc337b0d..e9b5a970904216775e81853ab5538328085eb74e 100644 --- a/board/technexion/pico-imx6ul/MAINTAINERS +++ b/board/technexion/pico-imx6ul/MAINTAINERS @@ -5,13 +5,6 @@ S: Maintained F: board/technexion/pico-imx6ul/ F: include/configs/pico-imx6ul.h F: configs/pico-imx6ul_defconfig - -TechNexion PICO-HOBBIT-IMX6UL -M: Otavio Salvador -S: Maintained +F: configs/pico-dwarf-imx6ul_defconfig F: configs/pico-hobbit-imx6ul_defconfig - -TechNexion PICO-PI-IMX6UL -M: Otavio Salvador -S: Maintained F: configs/pico-pi-imx6ul_defconfig diff --git a/board/technexion/pico-imx7d/MAINTAINERS b/board/technexion/pico-imx7d/MAINTAINERS index f9a1dfc05ece9d5f6bbdf57bdd76df9020fd5828..6e7316be9f6cbfe0e6acdce9fe8d07b193eabd7e 100644 --- a/board/technexion/pico-imx7d/MAINTAINERS +++ b/board/technexion/pico-imx7d/MAINTAINERS @@ -1,16 +1,10 @@ TechNexion PICO-IMX7D board M: Vanessa Maegima +M: Otavio Salvador S: Maintained F: board/technexion/pico-imx7d/ F: include/configs/pico-imx7d.h F: configs/pico-imx7d_defconfig - -TechNexion PICO-HOBBIT-IMX7 -M: Otavio Salvador -S: Maintained +F: configs/pico-imx7d_bl33_defconfig F: configs/pico-hobbit-imx7d_defconfig - -TechNexion PICO-PI-IMX7 -M: Otavio Salvador -S: Maintained F: configs/pico-pi-imx7d_defconfig diff --git a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 b/board/technexion/pico-imx7d/README.pico-imx7d_BL33 new file mode 100644 index 0000000000000000000000000000000000000000..40324ffe5f34188ac4265a7e87fbd49c0f00a838 --- /dev/null +++ b/board/technexion/pico-imx7d/README.pico-imx7d_BL33 @@ -0,0 +1,44 @@ +This document describes the instruction to build and flash ATF/OPTEE/U-Boot on +pico-imx7d board. U-Boot is loaded as part of FIP image by ATF in this setup. +The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure +world in this case. + +- Build u-boot + Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm + $ make pico-imx7d_bl33_defconfig + $ make all + +- Download and build OPTEE + $ git clone git@github.com:OP-TEE/optee_os.git + $ make PLATFORM=imx PLATFORM_FLAVOR=mx7dpico_mbl CFG_BOOT_SECONDARY_REQUEST=y ARCH=arm + +- Download and build ATF + $ git clone https://git.linaro.org/landing-teams/working/mbl/arm-trusted-firmware.git -b linaro-imx7 + $ make DEBUG=1 PLAT=picopi ARCH=aarch32 ARM_ARCH_MAJOR=7 \ + CROSS_COMPILE=arm-linux-gnueabihf- LOG_LEVEL=50 V=1 \ + CRASH_REPORTING=1 AARCH32_SP=optee all + Save file content in this link to file pico-imx7d.cfg: + http://git.linaro.org/landing-teams/working/mbl/u-boot.git/tree/board/technexion/pico-imx7d/pico-imx7d.cfg?h=linaro-imx + $ u-boot/tools/mkimage -n pico-imx7d.cfg -T imximage -e 0x9df00000 -d \ + build/picopi/debug/bl2.bin bl2.imx + +- Create FIP image + Create a fiptool_images/ folder in ATF folder, copy u-boot.bin in u-boot +folder and tee*.bin in optee out/arm-plat-imx/core/tee/ folder to +fiptool_images. Run below command in ATF folder to generate FIP image. + $ make -C tools/fiptool/ + $ tools/fiptool/fiptool create --tos-fw fiptool_images/tee-header_v2.bin \ + --tos-fw-extra1 fiptool_images/tee-pager_v2.bin \ + --tos-fw-extra2 fiptool_images/tee-pageable_v2.bin \ + --nt-fw fiptool_images/u-boot.bin \ + fip.bin + +- Burn the images to eMMC for test. + Run below command in atf folder: + $ dd if=build/picopi/debug/bl2.bin.imx of=/dev/disk/by-id/usb- bs=1024 seek=1;sync + $ dd if=fip.bin of=/dev/disk/by-id/usb- bs=1024 seek=1;sync + +- Test + Just boot up your board and wait for u-boot start up after ATF's log. + For booting Linux in FIT image, please reference the FIT files in + u-boot doc/uImage.FIT/ folder. diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index e63b19df6ed253c53bc84a12ee9653a63d6c9e80..e3d75e549a6da098d580348eb8ca929728fa7e37 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -63,6 +63,11 @@ int dram_init(void) { gd->ram_size = imx_ddr_size(); + /* Subtract the defined OPTEE runtime firmware length */ +#ifdef CONFIG_OPTEE_TZDRAM_SIZE + gd->ram_size -= CONFIG_OPTEE_TZDRAM_SIZE; +#endif + return 0; } @@ -80,8 +85,11 @@ int power_init_board(void) p = pmic_get("PFUZE3000"); ret = pmic_probe(p); - if (ret) - return ret; + if (ret) { + printf("Warning: Cannot find PMIC PFUZE3000\n"); + printf("\tPower consumption is not optimized.\n"); + return 0; + } pmic_reg_read(p, PFUZE3000_DEVICEID, ®); pmic_reg_read(p, PFUZE3000_REVID, &rev_id); diff --git a/board/toradex/apalis-imx8/Kconfig b/board/toradex/apalis-imx8/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..c680d63fa1a2947330258352ad9920ae08c578d3 --- /dev/null +++ b/board/toradex/apalis-imx8/Kconfig @@ -0,0 +1,30 @@ +if TARGET_APALIS_IMX8 + +config SYS_BOARD + default "apalis-imx8" + +config SYS_VENDOR + default "toradex" + +config SYS_CONFIG_NAME + default "apalis-imx8" + +config TDX_CFG_BLOCK + default y + +config TDX_HAVE_MMC + default y + +config TDX_CFG_BLOCK_DEV + default "0" + +config TDX_CFG_BLOCK_PART + default "1" + +# Toradex config block in eMMC, at the end of 1st "boot sector" +config TDX_CFG_BLOCK_OFFSET + default "-512" + +source "board/toradex/common/Kconfig" + +endif diff --git a/board/toradex/apalis-imx8/MAINTAINERS b/board/toradex/apalis-imx8/MAINTAINERS new file mode 100644 index 0000000000000000000000000000000000000000..c9ac58b47b17bbe45170febad0ff5c67de0b7e5b --- /dev/null +++ b/board/toradex/apalis-imx8/MAINTAINERS @@ -0,0 +1,9 @@ +Apalis iMX8 +M: Marcel Ziswiler +W: http://developer.toradex.com/software/linux/linux-software +S: Maintained +F: arch/arm/dts/fsl-imx8-apalis.dts +F: arch/arm/dts/fsl-imx8-apalis-u-boot.dtsi +F: board/toradex/apalis-imx8/ +F: configs/apalis-imx8qm_defconfig +F: include/configs/apalis-imx8.h diff --git a/board/toradex/apalis-imx8/Makefile b/board/toradex/apalis-imx8/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..a8c3eb7240bace2469464b02e9cbcce109c4ccdc --- /dev/null +++ b/board/toradex/apalis-imx8/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2019 Toradex +# + +obj-y += apalis-imx8.o diff --git a/board/toradex/apalis-imx8/README b/board/toradex/apalis-imx8/README new file mode 100644 index 0000000000000000000000000000000000000000..e6e3dcb367f840f69c0764cf8b93ffb7a2f6b370 --- /dev/null +++ b/board/toradex/apalis-imx8/README @@ -0,0 +1,66 @@ +U-Boot for the Toradex Apalis iMX8QM V1.0B Module + +Quick Start +=========== + +- Build the ARM trusted firmware binary +- Get scfw_tcm.bin and ahab-container.img +- Build U-Boot +- Load U-Boot binary using uuu +- Flash U-Boot binary into the eMMC +- Boot + +Get and Build the ARM Trusted Firmware +====================================== + +$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf +$ cd imx-atf/ +$ make PLAT=imx8qm bl31 + +Get scfw_tcm.bin and ahab-container.img +======================================= + +$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true +$ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin +$ chmod +x firmware-imx-8.0.bin +$ ./firmware-imx-8.0.bin + +Copy the following binaries to the U-Boot folder: + +$ cp imx-atf/build/imx8qm/release/bl31.bin . +$ cp u-boot/u-boot.bin . + +Copy the following firmware to the U-Boot folder: + +$ cp firmware-imx-8.0/firmware/seco/ahab-container.img . + +Build U-Boot +============ + +$ make apalis-imx8qm_defconfig +$ make u-boot-dtb.imx + +Load the U-Boot Binary Using UUU +================================ + +Get the latest version of the universal update utility (uuu) aka mfgtools 3.0: + +https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases + +Put the module into USB recovery aka serial downloader mode, connect USB device +to your host and execute uuu: + +sudo ./uuu u-boot/u-boot-dtb.imx + +Flash the U-Boot Binary into the eMMC +===================================== + +Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition: + +load mmc 1:1 $loadaddr u-boot-dtb.imx +setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 +mmc dev 0 1 +mmc write ${loadaddr} 0x0 ${blkcnt} + +Boot diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c new file mode 100644 index 0000000000000000000000000000000000000000..f516e546a8d6c62de85c3a91df09386c6b371e82 --- /dev/null +++ b/board/toradex/apalis-imx8/apalis-imx8.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Toradex + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/tdx-cfg-block.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +static iomux_cfg_t uart1_pads[] = { + SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +int board_early_init_f(void) +{ + sc_pm_clock_rate_t rate; + sc_err_t err = 0; + + /* Power up UART1 */ + err = sc_pm_set_resource_power_mode(-1, SC_R_UART_1, SC_PM_PW_MODE_ON); + if (err != SC_ERR_NONE) + return 0; + + /* Set UART3 clock root to 80 MHz */ + rate = 80000000; + err = sc_pm_set_clock_rate(-1, SC_R_UART_1, SC_PM_CLK_PER, &rate); + if (err != SC_ERR_NONE) + return 0; + + /* Enable UART1 clock root */ + err = sc_pm_clock_enable(-1, SC_R_UART_1, SC_PM_CLK_PER, true, false); + if (err != SC_ERR_NONE) + return 0; + + setup_iomux_uart(); + + return 0; +} + +#if IS_ENABLED(CONFIG_DM_GPIO) +static void board_gpio_init(void) +{ + /* TODO */ +} +#else +static inline void board_gpio_init(void) {} +#endif + +#if IS_ENABLED(CONFIG_FEC_MXC) +#include + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif + +void build_info(void) +{ + u32 sc_build = 0, sc_commit = 0; + + /* Get SCFW build and commit id */ + sc_misc_build_info(-1, &sc_build, &sc_commit); + if (!sc_build) { + printf("SCFW does not support build info\n"); + sc_commit = 0; /* Display 0 if build info not supported */ + } + printf("Build: SCFW %x\n", sc_commit); +} + +int checkboard(void) +{ + puts("Model: Toradex Apalis iMX8\n"); + + build_info(); + print_bootinfo(); + + return 0; +} + +int board_init(void) +{ + board_gpio_init(); + + return 0; +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(ulong addr) +{ + /* TODO */ +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, bd_t *bd) +{ + return ft_common_board_setup(blob, bd); +} +#endif + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +/* TODO move to common */ + env_set("board_name", "Apalis iMX8QM"); + env_set("board_rev", "v1.0"); +#endif + + return 0; +} diff --git a/board/toradex/apalis-imx8/apalis-imx8qm-imximage.cfg b/board/toradex/apalis-imx8/apalis-imx8qm-imximage.cfg new file mode 100644 index 0000000000000000000000000000000000000000..71981f8c551bae5b740c7e270f52918a6929da38 --- /dev/null +++ b/board/toradex/apalis-imx8/apalis-imx8qm-imximage.cfg @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 Toradex + * + * Refer doc/README.imx8image for more details about how-to configure + * and create imx8image boot image + */ + +#define __ASSEMBLY__ + +/* Boot from SD, sector size 0x400 */ +BOOT_FROM EMMC_FASTBOOT 0x400 +/* SoC type IMX8QM */ +SOC_TYPE IMX8QM +/* Append seco container image */ +APPEND mx8qm-ahab-container.img +/* Create the 2nd container */ +CONTAINER +/* Add scfw image with exec attribute */ +IMAGE SCU mx8qm-apalis-scfw-tcm.bin +/* Add ATF image with exec attribute */ +IMAGE A35 bl31.bin 0x80000000 +/* Add U-Boot image with load attribute */ +DATA A35 u-boot-dtb.bin 0x80020000 diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index 3e59185438063bb4e33a5f59e6e0a22c93c8671b..b502d4ef1359db3bd622ea1c5f6dc334a1326ecc 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -1131,52 +1131,3 @@ U_BOOT_DEVICE(mxc_serial) = { .name = "serial_mxc", .platdata = &mxc_serial_plat, }; - -#if CONFIG_IS_ENABLED(AHCI) -static int sata_imx_probe(struct udevice *dev) -{ - int i, err; - - for (i = 0; i < APALIS_IMX6_SATA_INIT_RETRIES; i++) { - err = setup_sata(); - if (err) { - printf("SATA setup failed: %d\n", err); - return err; - } - - udelay(100); - - err = dwc_ahsata_probe(dev); - if (!err) - break; - - /* There is no device on the SATA port */ - if (sata_dm_port_status(0, 0) == 0) - break; - - /* There's a device, but link not established. Retry */ - device_remove(dev, DM_REMOVE_NORMAL); - } - - return 0; -} - -struct ahci_ops sata_imx_ops = { - .port_status = dwc_ahsata_port_status, - .reset = dwc_ahsata_bus_reset, - .scan = dwc_ahsata_scan, -}; - -static const struct udevice_id sata_imx_ids[] = { - { .compatible = "fsl,imx6q-ahci" }, - { } -}; - -U_BOOT_DRIVER(sata_imx) = { - .name = "dwc_ahci", - .id = UCLASS_AHCI, - .of_match = sata_imx_ids, - .ops = &sata_imx_ops, - .probe = sata_imx_probe, -}; -#endif /* AHCI */ diff --git a/board/toradex/colibri-imx8x/Kconfig b/board/toradex/colibri-imx8x/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..d97fed020e718ac3400ed6d9f733ad093cf12751 --- /dev/null +++ b/board/toradex/colibri-imx8x/Kconfig @@ -0,0 +1,30 @@ +if TARGET_COLIBRI_IMX8X + +config SYS_BOARD + default "colibri-imx8x" + +config SYS_VENDOR + default "toradex" + +config SYS_CONFIG_NAME + default "colibri-imx8x" + +config TDX_CFG_BLOCK + default y + +config TDX_HAVE_MMC + default y + +config TDX_CFG_BLOCK_DEV + default "0" + +config TDX_CFG_BLOCK_PART + default "1" + +# Toradex config block in eMMC, at the end of 1st "boot sector" +config TDX_CFG_BLOCK_OFFSET + default "-512" + +source "board/toradex/common/Kconfig" + +endif diff --git a/board/toradex/colibri-imx8x/MAINTAINERS b/board/toradex/colibri-imx8x/MAINTAINERS new file mode 100644 index 0000000000000000000000000000000000000000..e91b9975c2733b155d7679897b6a29e63e7956e6 --- /dev/null +++ b/board/toradex/colibri-imx8x/MAINTAINERS @@ -0,0 +1,9 @@ +Colibri iMX8X +M: Marcel Ziswiler +W: http://developer.toradex.com/software/linux/linux-software +S: Maintained +F: arch/arm/dts/fsl-imx8x-colibri.dts +F: arch/arm/dts/fsl-imx8x-colibri-u-boot.dtsi +F: board/toradex/colibri-imx8x/ +F: configs/colibri-imx8qxp_defconfig +F: include/configs/colibri-imx8x.h diff --git a/board/toradex/colibri-imx8x/Makefile b/board/toradex/colibri-imx8x/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..e3945c8f15da89b6324cf6a81a874f531f6bffc7 --- /dev/null +++ b/board/toradex/colibri-imx8x/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2019 Toradex +# + +obj-y += colibri-imx8x.o diff --git a/board/toradex/colibri-imx8x/README b/board/toradex/colibri-imx8x/README new file mode 100644 index 0000000000000000000000000000000000000000..708bb3e51c93aba63eb4d5327f2becf5300f807f --- /dev/null +++ b/board/toradex/colibri-imx8x/README @@ -0,0 +1,66 @@ +U-Boot for the Toradex Colibri iMX8QXP V1.0B Module + +Quick Start +=========== + +- Build the ARM trusted firmware binary +- Get scfw_tcm.bin and ahab-container.img +- Build U-Boot +- Load U-Boot binary using uuu +- Flash U-Boot binary into the eMMC +- Boot + +Get and Build the ARM Trusted Firmware +====================================== + +$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf +$ cd imx-atf/ +$ make PLAT=imx8qxp bl31 + +Get scfw_tcm.bin and ahab-container.img +======================================= + +$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true +$ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin +$ chmod +x firmware-imx-8.0.bin +$ ./firmware-imx-8.0.bin + +Copy the following binaries to the U-Boot folder: + +$ cp imx-atf/build/imx8qxp/release/bl31.bin . +$ cp u-boot/u-boot.bin . + +Copy the following firmware to the U-Boot folder: + +$ cp firmware-imx-8.0/firmware/seco/ahab-container.img . + +Build U-Boot +============ + +$ make colibri-imx8qxp_defconfig +$ make u-boot-dtb.imx + +Load the U-Boot Binary Using UUU +================================ + +Get the latest version of the universal update utility (uuu) aka mfgtools 3.0: + +https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases + +Put the module into USB recovery aka serial downloader mode, connect USB device +to your host and execute uuu: + +sudo ./uuu u-boot/u-boot-dtb.imx + +Flash the U-Boot Binary into the eMMC +===================================== + +Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition: + +load mmc 1:1 $loadaddr u-boot-dtb.imx +setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 +mmc dev 0 1 +mmc write ${loadaddr} 0x0 ${blkcnt} + +Boot diff --git a/board/toradex/colibri-imx8x/colibri-imx8qxp-imximage.cfg b/board/toradex/colibri-imx8x/colibri-imx8qxp-imximage.cfg new file mode 100644 index 0000000000000000000000000000000000000000..1dcd13271d6bfbb5b4de30591592d5107bf8d5b6 --- /dev/null +++ b/board/toradex/colibri-imx8x/colibri-imx8qxp-imximage.cfg @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 Toradex + * + * Refer doc/README.imx8image for more details about how-to configure + * and create imx8image boot image + */ + +#define __ASSEMBLY__ + +/* Boot from SD, sector size 0x400 */ +BOOT_FROM EMMC_FASTBOOT 0x400 +/* SoC type IMX8QX */ +SOC_TYPE IMX8QX +/* Append seco container image */ +APPEND mx8qx-ahab-container.img +/* Create the 2nd container */ +CONTAINER +/* Add scfw image with exec attribute */ +IMAGE SCU mx8qx-colibri-scfw-tcm.bin +/* Add ATF image with exec attribute */ +IMAGE A35 bl31.bin 0x80000000 +/* Add U-Boot image with load attribute */ +DATA A35 u-boot-dtb.bin 0x80020000 diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c new file mode 100644 index 0000000000000000000000000000000000000000..aa8eaa0ea13aa43ffae26de17df5357efc354998 --- /dev/null +++ b/board/toradex/colibri-imx8x/colibri-imx8x.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Toradex + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/tdx-cfg-block.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +static iomux_cfg_t uart3_pads[] = { + SC_P_FLEXCAN2_RX | MUX_MODE_ALT(2) | MUX_PAD_CTRL(UART_PAD_CTRL), + SC_P_FLEXCAN2_TX | MUX_MODE_ALT(2) | MUX_PAD_CTRL(UART_PAD_CTRL), + /* Transceiver FORCEOFF# signal, mux to use pull-up */ + SC_P_QSPI0B_DQS | MUX_MODE_ALT(4) | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx8_iomux_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); +} + +int board_early_init_f(void) +{ + sc_pm_clock_rate_t rate; + sc_err_t err = 0; + + /* + * This works around that having only UART3 up the baudrate is 1.2M + * instead of 115.2k. Set UART0 clock root to 80 MHz + */ + rate = 80000000; + err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate); + if (err != SC_ERR_NONE) + return 0; + + /* Power up UART3 */ + err = sc_pm_set_resource_power_mode(-1, SC_R_UART_3, SC_PM_PW_MODE_ON); + if (err != SC_ERR_NONE) + return 0; + + /* Set UART3 clock root to 80 MHz */ + rate = 80000000; + err = sc_pm_set_clock_rate(-1, SC_R_UART_3, SC_PM_CLK_PER, &rate); + if (err != SC_ERR_NONE) + return 0; + + /* Enable UART3 clock root */ + err = sc_pm_clock_enable(-1, SC_R_UART_3, SC_PM_CLK_PER, true, false); + if (err != SC_ERR_NONE) + return 0; + + setup_iomux_uart(); + + return 0; +} + +#if IS_ENABLED(CONFIG_DM_GPIO) +static void board_gpio_init(void) +{ + /* TODO */ +} +#else +static inline void board_gpio_init(void) {} +#endif + +#if IS_ENABLED(CONFIG_FEC_MXC) +#include + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif + +void build_info(void) +{ + u32 sc_build = 0, sc_commit = 0; + + /* Get SCFW build and commit id */ + sc_misc_build_info(-1, &sc_build, &sc_commit); + if (!sc_build) { + printf("SCFW does not support build info\n"); + sc_commit = 0; /* Display 0 if build info not supported */ + } + printf("Build: SCFW %x\n", sc_commit); +} + +int checkboard(void) +{ + puts("Model: Toradex Colibri iMX8X\n"); + + build_info(); + print_bootinfo(); + + return 0; +} + +int board_init(void) +{ + board_gpio_init(); + + return 0; +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(ulong addr) +{ + /* TODO */ +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, bd_t *bd) +{ + return ft_common_board_setup(blob, bd); +} +#endif + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +/* TODO move to common */ + env_set("board_name", "Colibri iMX8QXP"); + env_set("board_rev", "v1.0"); +#endif + + return 0; +} diff --git a/board/wandboard/Makefile b/board/wandboard/Makefile index 6e886f729a85643335cf1eb4f7fabf6039277c11..c3d80536b3a322acb5161c0d4451529955c43719 100644 --- a/board/wandboard/Makefile +++ b/board/wandboard/Makefile @@ -2,4 +2,5 @@ # # (C) Copyright 2013 Freescale Semiconductor, Inc. -obj-y := wandboard.o spl.o +obj-y := wandboard.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/board/wandboard/spl.c b/board/wandboard/spl.c index 000cb109fc15527cbc554a88d9d74181f798f871..7b0f15a5c4d1fc64ccb79a7a5d005d1e996ca0bb 100644 --- a/board/wandboard/spl.c +++ b/board/wandboard/spl.c @@ -20,7 +20,6 @@ #include #include -#if defined(CONFIG_SPL_BUILD) #include /* * Driving strength: @@ -513,5 +512,3 @@ int board_mmc_init(bd_t *bis) return 0; } - -#endif diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 9b9e788eb3f86239afd9236f0d7707e30cd2ffd5..52b04976635449a15cb9bb0f73a0bd0dab3aadac 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -28,6 +28,7 @@ config SPL_FRAMEWORK config SPL_SIZE_LIMIT int "Maximum size of SPL image" depends on SPL + default 69632 if ARCH_MX6 default 0 help Specifies the maximum length of the U-Boot SPL image. diff --git a/configs/apalis-imx8qm_defconfig b/configs/apalis-imx8qm_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..f3dbaf0101f2a04976237197ef361191db4c0ca8 --- /dev/null +++ b/configs/apalis-imx8qm_defconfig @@ -0,0 +1,56 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8=y +CONFIG_SYS_TEXT_BASE=0x80020000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_TARGET_APALIS_IMX8=y +CONFIG_NR_DRAM_BANKS=3 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis-imx8/apalis-imx8qm-imximage.cfg" +CONFIG_LOG=y +CONFIG_VERSION_VARIABLE=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_CMD_CPU=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_UUID=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-apalis" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_CLK_IMX8=y +CONFIG_CPU=y +CONFIG_DM_GPIO=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_FEC_MXC_SHARE_MDIO=y +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_SCU_THERMAL=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index be9d55e7d475ce8c38b816f0c5bcdd2526711976..946858e48e3b491ae89e9b8eadebfbafaf72436c 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TEGRA124=y CONFIG_TARGET_APALIS_TK1=y diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 3292d644aa37993ec438817cb5fd6bfbba700a95..bcf7444311d707b0e90e7dc37230c21928813bc9 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 31a763536d372b962df448c133149f30b6738fa1..d231ccdb49bbb594c264fa3d086c28c502d5f0ae 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TEGRA30=y CONFIG_TARGET_APALIS_T30=y diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig index 3dbb4d95b67cb6d1e10a1b0b2954a482332e8c3b..133df9e72312a0027c4e46aace82610d423ca08e 100644 --- a/configs/colibri-imx6ull_defconfig +++ b/configs/colibri-imx6ull_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_COLIBRI_IMX6ULL=y CONFIG_NR_DRAM_BANKS=1 CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/colibri-imx8qxp_defconfig b/configs/colibri-imx8qxp_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..e69ee5eab9f78c01a3206cb71967650a2a2f3672 --- /dev/null +++ b/configs/colibri-imx8qxp_defconfig @@ -0,0 +1,54 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8=y +CONFIG_SYS_TEXT_BASE=0x80020000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_TARGET_COLIBRI_IMX8X=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_NR_DRAM_BANKS=3 +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri-imx8x/colibri-imx8qxp-imximage.cfg" +CONFIG_LOG=y +CONFIG_VERSION_VARIABLE=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_CMD_CPU=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_UUID=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-colibri" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_CLK_IMX8=y +CONFIG_CPU=y +CONFIG_DM_GPIO=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_MICREL=y +CONFIG_DM_ETH=y +CONFIG_FEC_MXC_SHARE_MDIO=y +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_SCU_THERMAL=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 9e307dae32699dc7faca0d83a115637b641553ed..59d4ab0a041b92a3a0a9738bf8e0622223a00f92 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index bfb84ecde8b462972a89f7c18f1ac079d2fecc31..5b0d09156956c037c33a1ecd3d743467f5941c79 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX7=y CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SECURE_BOOT=y CONFIG_TARGET_COLIBRI_IMX7=y CONFIG_NR_DRAM_BANKS=1 @@ -63,6 +64,7 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7=y CONFIG_DM_PMIC=y CONFIG_PMIC_RN5T567=y +CONFIG_DM_USB=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_GADGET=y diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig index 9312de9406c45bb08f4e0a9d1b87659b39c6bb40..bb11524794332a80ef14c14055cf06607d5b382b 100644 --- a/configs/colibri_imx7_emmc_defconfig +++ b/configs/colibri_imx7_emmc_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX7=y CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SECURE_BOOT=y CONFIG_TARGET_COLIBRI_IMX7=y CONFIG_TARGET_COLIBRI_IMX7_EMMC=y @@ -66,3 +67,12 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DM_USB=y +CONFIG_FASTBOOT=y +CONFIG_FASTBOOT_USB_DEV=0 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x82000000 +CONFIG_FASTBOOT_BUF_SIZE=0x10000000 diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig index 492ee9eaaf0a64eb70e85a25c9bdefea743c21af..7c420582c58805da47fe5d18cfbd0d541e44c4b3 100644 --- a/configs/colibri_pxa270_defconfig +++ b/configs/colibri_pxa270_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_DCACHE_OFF=y CONFIG_TARGET_COLIBRI_PXA270=y CONFIG_SYS_TEXT_BASE=0x0 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_USE_BOOTARGS=y diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index d1bfd3c87a65db647a6a5c100bb2645ecae3441e..e652ebc5a57759c5405d2e310084fc0e7afda463 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TEGRA20=y CONFIG_TARGET_COLIBRI_T20=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index 2d12fc10c4d07ef4725e92133cbc67bb2856a849..99be27823d57c1a4aca709b54daecf4a35a4cc44 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TEGRA30=y CONFIG_TARGET_COLIBRI_T30=y diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index 7334002df8950e51e71df6cdfe0345e25ea3f051..75498fddb353c449844d63f7f97c3ec64b107e8e 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_VF610=y CONFIG_SYS_TEXT_BASE=0x3f401000 -CONFIG_SYS_MALLOC_F_LEN=0x800 +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_NR_DRAM_BANKS=1 CONFIG_TARGET_COLIBRI_VF=y CONFIG_ENV_VARS_UBOOT_CONFIG=y diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index d9ec5c7c5ecb5b0c84f31fa15b7145ce9c15c081..70f02770406548ec2a7eab74f16dfcdaa59cf1ad 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -10,9 +10,13 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000 +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=3 @@ -37,25 +41,35 @@ CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-dhcom-pdk2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DWC_AHSATA=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_FSL_ESDHC=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=25000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_FEC_MXC=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SCSI=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_MXC_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="dh" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 @@ -63,4 +77,3 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y -CONFIG_OF_LIBFDT=y diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index d0f302e9d09be9577891de0295d89981d0e38dc2..558b1cd99696da1a259c61623aaa5c2ffa5ec663 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_TARGET_MX6SABREAUTO=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y @@ -11,7 +12,6 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_NXP_BOARD_REVISION=y -# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y CONFIG_SPL_FIT_PRINT=y CONFIG_SPL_LOAD_FIT=y @@ -26,6 +26,9 @@ CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y @@ -55,7 +58,6 @@ CONFIG_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SPL_DM=y CONFIG_DFU_MMC=y CONFIG_DFU_SF=y CONFIG_DM_GPIO=y @@ -70,6 +72,8 @@ CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 0fda6fc3946e69c211fc55d23a6696cfed1da207..89d542fef7bcc30ae5653376e1ff701143d6393b 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -66,7 +66,6 @@ CONFIG_SPL_OF_LIST="imx6dl-sabresd imx6q-sabresd imx6qp-sabresd" CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SPL_DM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x12000000 CONFIG_FASTBOOT_BUF_SIZE=0x10000000 @@ -83,6 +82,8 @@ CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y CONFIG_PCI=y CONFIG_DM_REGULATOR=y CONFIG_SPI=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 340e1cd91c69a23cc5f2413a877aee0ae3233297..e649ebb549b92de294b35112fc1b1df09f467969 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_MX6_DDRCAL=y CONFIG_TARGET_KOSAGI_NOVENA=y CONFIG_SPL_MMC_SUPPORT=y @@ -13,6 +14,7 @@ CONFIG_SPL=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_CMD_HDMIDETECT=y +CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" @@ -29,6 +31,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y @@ -40,15 +43,25 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_PARTITION_UUIDS is not set +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-novena" CONFIG_ENV_IS_IN_MMC=y +CONFIG_DM=y CONFIG_DWC_AHSATA=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MII=y CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SCSI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y CONFIG_USB_GADGET=y @@ -58,8 +71,7 @@ CONFIG_USB_ETH_CDC=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_DM_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_IPUV3=y -CONFIG_VIDEO=y -# CONFIG_VIDEO_SW_CURSOR is not set CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/phycore_pcl063_ull_defconfig b/configs/phycore_pcl063_ull_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..75408a83447c2bf2075a78a40ea0905c583dcdee --- /dev/null +++ b/configs/phycore_pcl063_ull_defconfig @@ -0,0 +1,54 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_PCL063_ULL=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL=y +# CONFIG_CMD_DEKBLOB is not set +CONFIG_DISTRO_DEFAULTS=y +CONFIG_NR_DRAM_BANKS=8 +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_BOOTDELAY=3 +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +# CONFIG_RANDOM_UUID is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_CACHE=y +# CONFIG_ISO_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6ull-phycore-segin" +CONFIG_DM_I2C_GPIO=y +CONFIG_SYS_I2C_MXC=y +CONFIG_FSL_ESDHC=y +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +# CONFIG_SPL_PMIC_CHILDREN is not set +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_MXC_UART=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Phytec" +CONFIG_USB_GADGET_VENDOR_NUM=0x01b67 +CONFIG_USB_GADGET_PRODUCT_NUM=0x4fff +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_LZO=y diff --git a/configs/pico-imx7d_bl33_defconfig b/configs/pico-imx7d_bl33_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..932ed4c489255d14ccf64a4ab2bdafd42763d225 --- /dev/null +++ b/configs/pico-imx7d_bl33_defconfig @@ -0,0 +1,66 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7=y +CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_PICO_IMX7D=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL=y +CONFIG_ARMV7_BOOT_SEC_DEFAULT=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_BOUNCE_BUFFER=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BOOTD is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PXE=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi" +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DFU_MMC=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_PHYLIB=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX7=y +CONFIG_CONS_INDEX=4 +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_MXC_USB_OTG_HACTIVE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_ETHER=y +CONFIG_USB_ETH_CDC=y +CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" +CONFIG_VIDEO=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_OPTEE_TZDRAM_SIZE=0x2000000 diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index 073ff4832968e9fd07b3105ff9822272ce0fdd77..9e8326e7711cd28301d3af415b28c19137064947 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -1,10 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x87800000 -CONFIG_TARGET_SAMTEC_VINING_2000=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_TARGET_SOFTING_VINING_2000=y +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 CONFIG_NR_DRAM_BANKS=1 # CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/samtec/vining_2000/imximage.cfg" +CONFIG_TPL_SYS_MALLOC_F_LEN=0x400 +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/softing/vining_2000/imximage.cfg" CONFIG_BOOTDELAY=0 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SUPPORT_RAW_INITRD=y @@ -18,6 +21,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_PCI=y +# CONFIG_CMD_PINMUX is not set CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -31,15 +35,25 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6sx-softing-vining-2000" CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y -CONFIG_OF_LIBFDT=y diff --git a/drivers/clk/imx/clk-imx8qm.c b/drivers/clk/imx/clk-imx8qm.c index 6b5561e1786afe63e153372d17a8fd079dcad663..a6b09d2109503bce18d26a01c3028f6318339ca5 100644 --- a/drivers/clk/imx/clk-imx8qm.c +++ b/drivers/clk/imx/clk-imx8qm.c @@ -80,6 +80,12 @@ ulong imx8_clk_get_rate(struct clk *clk) resource = SC_R_SDHC_1; pm_clk = SC_PM_CLK_PER; break; + case IMX8QM_SDHC2_IPG_CLK: + case IMX8QM_SDHC2_CLK: + case IMX8QM_SDHC2_DIV: + resource = SC_R_SDHC_2; + pm_clk = SC_PM_CLK_PER; + break; case IMX8QM_UART0_IPG_CLK: case IMX8QM_UART0_CLK: resource = SC_R_UART_0; @@ -185,6 +191,12 @@ ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate) resource = SC_R_SDHC_1; pm_clk = SC_PM_CLK_PER; break; + case IMX8QM_SDHC2_IPG_CLK: + case IMX8QM_SDHC2_CLK: + case IMX8QM_SDHC2_DIV: + resource = SC_R_SDHC_2; + pm_clk = SC_PM_CLK_PER; + break; case IMX8QM_ENET0_IPG_CLK: case IMX8QM_ENET0_AHB_CLK: case IMX8QM_ENET0_REF_DIV: @@ -273,6 +285,12 @@ int __imx8_clk_enable(struct clk *clk, bool enable) resource = SC_R_SDHC_1; pm_clk = SC_PM_CLK_PER; break; + case IMX8QM_SDHC2_IPG_CLK: + case IMX8QM_SDHC2_CLK: + case IMX8QM_SDHC2_DIV: + resource = SC_R_SDHC_2; + pm_clk = SC_PM_CLK_PER; + break; case IMX8QM_ENET0_IPG_CLK: case IMX8QM_ENET0_AHB_CLK: case IMX8QM_ENET0_REF_DIV: diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index cc8d3b02a5349b72586eabb0f5295c367463d743..31217623649f012ed6c6a9e5bed4ae01735eae12 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -578,8 +578,6 @@ int sec_init_idx(uint8_t sec_idx) { ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx); uint32_t mcr = sec_in32(&sec->mcfgr); - uint32_t jrown_ns; - int i; int ret = 0; #ifdef CONFIG_FSL_CORENET @@ -635,13 +633,6 @@ int sec_init_idx(uint8_t sec_idx) #endif #endif - /* Set ownership of job rings to non-TrustZone mode by default */ - for (i = 0; i < ARRAY_SIZE(sec->jrliodnr); i++) { - jrown_ns = sec_in32(&sec->jrliodnr[i].ms); - jrown_ns |= JROWN_NS | JRMID_NS; - sec_out32(&sec->jrliodnr[i].ms, jrown_ns); - } - ret = jr_init(sec_idx); if (ret < 0) { printf("SEC initialization failed\n"); diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h index f6fbb4438382d6b62cb92b07ff750de69d033a0e..ffd3a1927385c58d1a212b244c8bd1a5fdec3011 100644 --- a/drivers/crypto/fsl/jr.h +++ b/drivers/crypto/fsl/jr.h @@ -33,8 +33,6 @@ #define JRNSLIODN_MASK 0x0fff0000 #define JRSLIODN_SHIFT 0 #define JRSLIODN_MASK 0x00000fff -#define JROWN_NS 0x00000008 -#define JRMID_NS 0x00000001 #define JQ_DEQ_ERR -1 #define JQ_DEQ_TO_ERR -2 diff --git a/drivers/misc/imx8/fuse.c b/drivers/misc/imx8/fuse.c index 29d2256a22de8bde47b9b339f4aa81e98256c964..2f2fad2c17c6448d2869658ee76eceae21b3146b 100644 --- a/drivers/misc/imx8/fuse.c +++ b/drivers/misc/imx8/fuse.c @@ -15,13 +15,11 @@ DECLARE_GLOBAL_DATA_PTR; #define FSL_ECC_WORD_START_1 0x10 #define FSL_ECC_WORD_END_1 0x10F -#ifdef CONFIG_IMX8QXP #define FSL_ECC_WORD_START_2 0x220 #define FSL_ECC_WORD_END_2 0x31F #define FSL_QXP_FUSE_GAP_START 0x110 #define FSL_QXP_FUSE_GAP_END 0x21F -#endif #define FSL_SIP_OTP_READ 0xc200000A #define FSL_SIP_OTP_WRITE 0xc200000B diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index a672250e16a166ab22d4cbc77793c53626beaa0a..d7c080943a53984f895ef0de8f3da242575b1a53 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -604,7 +604,7 @@ static int fec_init(struct eth_device *dev, bd_t *bd) writel(0x00000000, &fec->eth->gaddr2); /* Do not access reserved register */ - if (!is_mx6ul() && !is_mx6ull() && !is_imx8m()) { + if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m()) { /* clear MIB RAM */ for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4) writel(0, i); diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index fcc4ab713923aec381fc97cf053e54f17101205d..10b8fb4c889ec1210404a109992baff6199e9e15 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -92,6 +93,11 @@ #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) #define PCIE_ATU_UPPER_TARGET 0x91C +struct imx_pcie_priv { + void __iomem *dbi_base; + void __iomem *cfg_base; +}; + /* * PHY access functions */ @@ -225,13 +231,13 @@ static int pcie_phy_write(void __iomem *dbi_base, int addr, int data) return 0; } -static int imx6_pcie_link_up(void) +static int imx6_pcie_link_up(struct imx_pcie_priv *priv) { u32 rc, ltssm; int rx_valid, temp; /* link is debug bit 36, debug register 1 starts at bit 32 */ - rc = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1); + rc = readl(priv->dbi_base + PCIE_PHY_DEBUG_R1); if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) && !(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)) return -EAGAIN; @@ -243,8 +249,8 @@ static int imx6_pcie_link_up(void) * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition * to gen2 is stuck */ - pcie_phy_read((void *)MX6_DBI_ADDR, PCIE_PHY_RX_ASIC_OUT, &rx_valid); - ltssm = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0) & 0x3F; + pcie_phy_read(priv->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid); + ltssm = readl(priv->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F; if (rx_valid & 0x01) return 0; @@ -254,15 +260,15 @@ static int imx6_pcie_link_up(void) printf("transition to gen2 is stuck, reset PHY!\n"); - pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp); + pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp); temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN); - pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp); + pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp); udelay(3000); - pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp); + pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp); temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN); - pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp); + pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp); return 0; } @@ -270,7 +276,7 @@ static int imx6_pcie_link_up(void) /* * iATU region setup */ -static int imx_pcie_regions_setup(void) +static int imx_pcie_regions_setup(struct imx_pcie_priv *priv) { /* * i.MX6 defines 16MB in the AXI address map for PCIe. @@ -285,24 +291,27 @@ static int imx_pcie_regions_setup(void) */ /* CMD reg:I/O space, MEM space, and Bus Master Enable */ - setbits_le32(MX6_DBI_ADDR | PCI_COMMAND, + setbits_le32(priv->dbi_base + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); /* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */ - setbits_le32(MX6_DBI_ADDR + PCI_CLASS_REVISION, + setbits_le32(priv->dbi_base + PCI_CLASS_REVISION, PCI_CLASS_BRIDGE_PCI << 16); /* Region #0 is used for Outbound CFG space access. */ - writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT); + writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT); - writel(MX6_ROOT_ADDR, MX6_DBI_ADDR + PCIE_ATU_LOWER_BASE); - writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_BASE); - writel(MX6_ROOT_ADDR + MX6_ROOT_SIZE, MX6_DBI_ADDR + PCIE_ATU_LIMIT); + writel(lower_32_bits((uintptr_t)priv->cfg_base), + priv->dbi_base + PCIE_ATU_LOWER_BASE); + writel(upper_32_bits((uintptr_t)priv->cfg_base), + priv->dbi_base + PCIE_ATU_UPPER_BASE); + writel(lower_32_bits((uintptr_t)priv->cfg_base + MX6_ROOT_SIZE), + priv->dbi_base + PCIE_ATU_LIMIT); - writel(0, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET); - writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_TARGET); - writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1); - writel(PCIE_ATU_ENABLE, MX6_DBI_ADDR + PCIE_ATU_CR2); + writel(0, priv->dbi_base + PCIE_ATU_LOWER_TARGET); + writel(0, priv->dbi_base + PCIE_ATU_UPPER_TARGET); + writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1); + writel(PCIE_ATU_ENABLE, priv->dbi_base + PCIE_ATU_CR2); return 0; } @@ -310,23 +319,24 @@ static int imx_pcie_regions_setup(void) /* * PCI Express accessors */ -static uint32_t get_bus_address(pci_dev_t d, int where) +static void __iomem *get_bus_address(struct imx_pcie_priv *priv, + pci_dev_t d, int where) { - uint32_t va_address; + void __iomem *va_address; /* Reconfigure Region #0 */ - writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT); + writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT); if (PCI_BUS(d) < 2) - writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1); + writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1); else - writel(PCIE_ATU_TYPE_CFG1, MX6_DBI_ADDR + PCIE_ATU_CR1); + writel(PCIE_ATU_TYPE_CFG1, priv->dbi_base + PCIE_ATU_CR1); if (PCI_BUS(d) == 0) { - va_address = MX6_DBI_ADDR; + va_address = priv->dbi_base; } else { - writel(d << 8, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET); - va_address = MX6_IO_ADDR + SZ_16M - SZ_1M; + writel(d << 8, priv->dbi_base + PCIE_ATU_LOWER_TARGET); + va_address = priv->cfg_base; } va_address += (where & ~0x3); @@ -374,10 +384,10 @@ static void imx_pcie_fix_dabt_handler(bool set) } } -static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d, - int where, u32 *val) +static int imx_pcie_read_cfg(struct imx_pcie_priv *priv, pci_dev_t d, + int where, u32 *val) { - uint32_t va_address; + void __iomem *va_address; int ret; ret = imx_pcie_addr_valid(d); @@ -386,7 +396,7 @@ static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d, return 0; } - va_address = get_bus_address(d, where); + va_address = get_bus_address(priv, d, where); /* * Read the PCIe config space. We must replace the DABT handler @@ -403,17 +413,17 @@ static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d, return 0; } -static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d, - int where, u32 val) +static int imx_pcie_write_cfg(struct imx_pcie_priv *priv, pci_dev_t d, + int where, u32 val) { - uint32_t va_address = 0; + void __iomem *va_address = NULL; int ret; ret = imx_pcie_addr_valid(d); if (ret) return ret; - va_address = get_bus_address(d, where); + va_address = get_bus_address(priv, d, where); /* * Write the PCIe config space. We must replace the DABT handler @@ -430,7 +440,8 @@ static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d, /* * Initial bus setup */ -static int imx6_pcie_assert_core_reset(bool prepare_for_boot) +static int imx6_pcie_assert_core_reset(struct imx_pcie_priv *priv, + bool prepare_for_boot) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; @@ -465,12 +476,12 @@ static int imx6_pcie_assert_core_reset(bool prepare_for_boot) gpr12 = readl(&iomuxc_regs->gpr[12]); if ((gpr1 & IOMUXC_GPR1_PCIE_REF_CLK_EN) && (gpr12 & IOMUXC_GPR12_PCIE_CTL_2)) { - val = readl(MX6_DBI_ADDR + PCIE_PL_PFLR); + val = readl(priv->dbi_base + PCIE_PL_PFLR); val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; val |= PCIE_PL_PFLR_FORCE_LINK; imx_pcie_fix_dabt_handler(true); - writel(val, MX6_DBI_ADDR + PCIE_PL_PFLR); + writel(val, priv->dbi_base + PCIE_PL_PFLR); imx_pcie_fix_dabt_handler(false); gpr12 &= ~IOMUXC_GPR12_PCIE_CTL_2; @@ -602,17 +613,17 @@ static int imx6_pcie_deassert_core_reset(void) return 0; } -static int imx_pcie_link_up(void) +static int imx_pcie_link_up(struct imx_pcie_priv *priv) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; uint32_t tmp; int count = 0; - imx6_pcie_assert_core_reset(false); + imx6_pcie_assert_core_reset(priv, false); imx6_pcie_init_phy(); imx6_pcie_deassert_core_reset(); - imx_pcie_regions_setup(); + imx_pcie_regions_setup(priv); /* * By default, the subordinate is set equally to the secondary @@ -621,9 +632,9 @@ static int imx_pcie_link_up(void) * Force the PCIe RC subordinate to 0xff, otherwise no downstream * devices will be detected if the enumeration is applied strictly. */ - tmp = readl(MX6_DBI_ADDR + 0x18); + tmp = readl(priv->dbi_base + 0x18); tmp |= (0xff << 16); - writel(tmp, MX6_DBI_ADDR + 0x18); + writel(tmp, priv->dbi_base + 0x18); /* * FIXME: Force the PCIe RC to Gen1 operation @@ -631,15 +642,15 @@ static int imx_pcie_link_up(void) * up, otherwise no downstream devices are detected. After the * link is up, a managed Gen1->Gen2 transition can be initiated. */ - tmp = readl(MX6_DBI_ADDR + 0x7c); + tmp = readl(priv->dbi_base + 0x7c); tmp &= ~0xf; tmp |= 0x1; - writel(tmp, MX6_DBI_ADDR + 0x7c); + writel(tmp, priv->dbi_base + 0x7c); /* LTSSM enable, starting link. */ setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE); - while (!imx6_pcie_link_up()) { + while (!imx6_pcie_link_up(priv)) { udelay(10); count++; if (count >= 4000) { @@ -647,8 +658,8 @@ static int imx_pcie_link_up(void) puts("PCI: pcie phy link never came up\n"); #endif debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", - readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0), - readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1)); + readl(priv->dbi_base + PCIE_PHY_DEBUG_R0), + readl(priv->dbi_base + PCIE_PHY_DEBUG_R1)); return -EINVAL; } } @@ -656,6 +667,30 @@ static int imx_pcie_link_up(void) return 0; } +#if !CONFIG_IS_ENABLED(DM_PCI) +static struct imx_pcie_priv imx_pcie_priv = { + .dbi_base = (void __iomem *)MX6_DBI_ADDR, + .cfg_base = (void __iomem *)MX6_ROOT_ADDR, +}; + +static struct imx_pcie_priv *priv = &imx_pcie_priv; + +static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d, + int where, u32 *val) +{ + struct imx_pcie_priv *priv = hose->priv_data; + + return imx_pcie_read_cfg(priv, d, where, val); +} + +static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d, + int where, u32 val) +{ + struct imx_pcie_priv *priv = hose->priv_data; + + return imx_pcie_write_cfg(priv, d, where, val); +} + void imx_pcie_init(void) { /* Static instance of the controller. */ @@ -665,6 +700,8 @@ void imx_pcie_init(void) memset(&pcc, 0, sizeof(pcc)); + hose->priv_data = priv; + /* PCI I/O space */ pci_set_region(&hose->regions[0], MX6_IO_ADDR, MX6_IO_ADDR, @@ -691,7 +728,7 @@ void imx_pcie_init(void) imx_pcie_write_config); /* Start the controller. */ - ret = imx_pcie_link_up(); + ret = imx_pcie_link_up(priv); if (!ret) { pci_register_hose(hose); @@ -701,7 +738,7 @@ void imx_pcie_init(void) void imx_pcie_remove(void) { - imx6_pcie_assert_core_reset(true); + imx6_pcie_assert_core_reset(priv, true); } /* Probe function. */ @@ -709,3 +746,86 @@ void pci_init_board(void) { imx_pcie_init(); } +#else +static int imx_pcie_dm_read_config(struct udevice *dev, pci_dev_t bdf, + uint offset, ulong *value, + enum pci_size_t size) +{ + struct imx_pcie_priv *priv = dev_get_priv(dev); + u32 tmpval; + int ret; + + ret = imx_pcie_read_cfg(priv, bdf, offset, &tmpval); + if (ret) + return ret; + + *value = pci_conv_32_to_size(tmpval, offset, size); + return 0; +} + +static int imx_pcie_dm_write_config(struct udevice *dev, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + struct imx_pcie_priv *priv = dev_get_priv(dev); + u32 tmpval, newval; + int ret; + + ret = imx_pcie_read_cfg(priv, bdf, offset, &tmpval); + if (ret) + return ret; + + newval = pci_conv_size_to_32(tmpval, value, offset, size); + return imx_pcie_write_cfg(priv, bdf, offset, newval); +} + +static int imx_pcie_dm_probe(struct udevice *dev) +{ + struct imx_pcie_priv *priv = dev_get_priv(dev); + + return imx_pcie_link_up(priv); +} + +static int imx_pcie_dm_remove(struct udevice *dev) +{ + struct imx_pcie_priv *priv = dev_get_priv(dev); + + imx6_pcie_assert_core_reset(priv, true); + + return 0; +} + +static int imx_pcie_ofdata_to_platdata(struct udevice *dev) +{ + struct imx_pcie_priv *priv = dev_get_priv(dev); + + priv->dbi_base = (void __iomem *)devfdt_get_addr_index(dev, 0); + priv->cfg_base = (void __iomem *)devfdt_get_addr_index(dev, 1); + if (!priv->dbi_base || !priv->cfg_base) + return -EINVAL; + + return 0; +} + +static const struct dm_pci_ops imx_pcie_ops = { + .read_config = imx_pcie_dm_read_config, + .write_config = imx_pcie_dm_write_config, +}; + +static const struct udevice_id imx_pcie_ids[] = { + { .compatible = "fsl,imx6q-pcie" }, + { } +}; + +U_BOOT_DRIVER(imx_pcie) = { + .name = "imx_pcie", + .id = UCLASS_PCI, + .of_match = imx_pcie_ids, + .ops = &imx_pcie_ops, + .probe = imx_pcie_dm_probe, + .remove = imx_pcie_dm_remove, + .ofdata_to_platdata = imx_pcie_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct imx_pcie_priv), + .flags = DM_FLAG_OS_PREPARE, +}; +#endif diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c index d7c95bb7387b443195c6791e363fb50e65a3f8b9..0c1e7a9c05aee94b4585d98b7d99c0bd1f0c7972 100644 --- a/drivers/pinctrl/nxp/pinctrl-imx6.c +++ b/drivers/pinctrl/nxp/pinctrl-imx6.c @@ -10,7 +10,7 @@ #include "pinctrl-imx.h" -static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info; +static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info __section(".data"); /* FIXME Before reloaction, BSS is overlapped with DT area */ static struct imx_pinctrl_soc_info imx6ul_pinctrl_soc_info = { diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index b0cd26035432c7d9ef69d96d5efe182a2f21f9ef..450935fdc16e2dfa838b4cc5baf9e95541369d59 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -48,6 +48,13 @@ config PMIC_AS3722 interface and is designs to cover most of the power managementment required for a tablets or laptop. +config DM_PMIC_BD71837 + bool "Enable Driver Model for PMIC BD71837" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC BD71837. The driver implements read/write operations. + config DM_PMIC_FAN53555 bool "Enable support for OnSemi FAN53555" depends on DM_PMIC && DM_REGULATOR && DM_I2C diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index ce250cb1555afd724bf4377c10cc897ddc5aa1a7..888dbb2857397630cf2f74fbde750310675de652 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o +obj-$(CONFIG_$(SPL_)DM_PMIC_BD71837) += bd71837.o obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o diff --git a/drivers/power/pmic/bd71837.c b/drivers/power/pmic/bd71837.c new file mode 100644 index 0000000000000000000000000000000000000000..24d9f7fab73754c0b4c8891d817d06507bb78fc7 --- /dev/null +++ b/drivers/power/pmic/bd71837.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static const struct pmic_child_info pmic_children_info[] = { + /* buck */ + { .prefix = "b", .driver = BD71837_REGULATOR_DRIVER}, + /* ldo */ + { .prefix = "l", .driver = BD71837_REGULATOR_DRIVER}, + { }, +}; + +static int bd71837_reg_count(struct udevice *dev) +{ + return BD71837_REG_NUM; +} + +static int bd71837_write(struct udevice *dev, uint reg, const uint8_t *buff, + int len) +{ + if (dm_i2c_write(dev, reg, buff, len)) { + pr_err("write error to device: %p register: %#x!", dev, reg); + return -EIO; + } + + return 0; +} + +static int bd71837_read(struct udevice *dev, uint reg, uint8_t *buff, int len) +{ + if (dm_i2c_read(dev, reg, buff, len)) { + pr_err("read error from device: %p register: %#x!", dev, reg); + return -EIO; + } + + return 0; +} + +static int bd71837_bind(struct udevice *dev) +{ + int children; + ofnode regulators_node; + + regulators_node = dev_read_subnode(dev, "regulators"); + if (!ofnode_valid(regulators_node)) { + debug("%s: %s regulators subnode not found!", __func__, + dev->name); + return -ENXIO; + } + + debug("%s: '%s' - found regulators subnode\n", __func__, dev->name); + + children = pmic_bind_children(dev, regulators_node, pmic_children_info); + if (!children) + debug("%s: %s - no child found\n", __func__, dev->name); + + /* Always return success for this device */ + return 0; +} + +static struct dm_pmic_ops bd71837_ops = { + .reg_count = bd71837_reg_count, + .read = bd71837_read, + .write = bd71837_write, +}; + +static const struct udevice_id bd71837_ids[] = { + { .compatible = "rohm,bd71837", .data = 0x4b, }, + { } +}; + +U_BOOT_DRIVER(pmic_bd71837) = { + .name = "bd71837 pmic", + .id = UCLASS_PMIC, + .of_match = bd71837_ids, + .bind = bd71837_bind, + .ops = &bd71837_ops, +}; diff --git a/drivers/power/regulator/pfuze100.c b/drivers/power/regulator/pfuze100.c index 99073d6018c0eeb313474ea4fd8a559e2b4a31f7..d6d35f3a39d6ffffcb747e11d768afed94dd76ca 100644 --- a/drivers/power/regulator/pfuze100.c +++ b/drivers/power/regulator/pfuze100.c @@ -482,11 +482,11 @@ static int pfuze100_regulator_val(struct udevice *dev, int op, int *uV) debug("Set voltage for REGULATOR_TYPE_FIXED regulator\n"); return -EINVAL; } else if (desc->volt_table) { - for (i = 0; i < desc->vsel_mask; i++) { + for (i = 0; i <= desc->vsel_mask; i++) { if (*uV == desc->volt_table[i]) break; } - if (i == desc->vsel_mask) { + if (i == desc->vsel_mask + 1) { debug("Unsupported voltage %u\n", *uV); return -EINVAL; } diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index 476df2580591262718ad3abccbcca60b551bbf67..a435e68005ff8dbc541634385fe0838cb1977016 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -342,6 +342,7 @@ static int mxc_serial_ofdata_to_platdata(struct udevice *dev) } static const struct udevice_id mxc_serial_ids[] = { + { .compatible = "fsl,imx6sx-uart" }, { .compatible = "fsl,imx6ul-uart" }, { .compatible = "fsl,imx7d-uart" }, { .compatible = "fsl,imx6q-uart" }, diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 684676271997b50e198506581e3e9ebd388ed268..d94aaf9fdbd2048da4f3e6c7e262fa544e160ada 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -38,6 +38,8 @@ __weak int board_spi_cs_gpio(unsigned bus, unsigned cs) #define CONFIG_SYS_SPI_MXC_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */ #endif +#define MAX_CS_COUNT 4 + struct mxc_spi_slave { struct spi_slave slave; unsigned long base; @@ -50,6 +52,8 @@ struct mxc_spi_slave { unsigned int max_hz; unsigned int mode; struct gpio_desc ss; + struct gpio_desc cs_gpios[MAX_CS_COUNT]; + struct udevice *dev; }; static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) @@ -59,22 +63,38 @@ static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) static void mxc_spi_cs_activate(struct mxc_spi_slave *mxcs) { - if (CONFIG_IS_ENABLED(DM_SPI)) { - dm_gpio_set_value(&mxcs->ss, 1); - } else { - if (mxcs->gpio > 0) - gpio_set_value(mxcs->gpio, mxcs->ss_pol); - } +#if defined(CONFIG_DM_SPI) + struct udevice *dev = mxcs->dev; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + + u32 cs = slave_plat->cs; + + if (!dm_gpio_is_valid(&mxcs->cs_gpios[cs])) + return; + + dm_gpio_set_value(&mxcs->cs_gpios[cs], 1); +#else + if (mxcs->gpio > 0) + gpio_set_value(mxcs->gpio, mxcs->ss_pol); +#endif } static void mxc_spi_cs_deactivate(struct mxc_spi_slave *mxcs) { - if (CONFIG_IS_ENABLED(DM_SPI)) { - dm_gpio_set_value(&mxcs->ss, 0); - } else { - if (mxcs->gpio > 0) - gpio_set_value(mxcs->gpio, !(mxcs->ss_pol)); - } +#if defined(CONFIG_DM_SPI) + struct udevice *dev = mxcs->dev; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + + u32 cs = slave_plat->cs; + + if (!dm_gpio_is_valid(&mxcs->cs_gpios[cs])) + return; + + dm_gpio_set_value(&mxcs->cs_gpios[cs], 0); +#else + if (mxcs->gpio > 0) + gpio_set_value(mxcs->gpio, !(mxcs->ss_pol)); +#endif } u32 get_cspi_div(u32 div) @@ -488,28 +508,35 @@ void spi_release_bus(struct spi_slave *slave) static int mxc_spi_probe(struct udevice *bus) { - struct mxc_spi_slave *plat = bus->platdata; struct mxc_spi_slave *mxcs = dev_get_platdata(bus); int node = dev_of_offset(bus); const void *blob = gd->fdt_blob; int ret; + int i; - if (gpio_request_by_name(bus, "cs-gpios", 0, &plat->ss, - GPIOD_IS_OUT)) { - dev_err(bus, "No cs-gpios property\n"); - return -EINVAL; + ret = gpio_request_list_by_name(bus, "cs-gpios", mxcs->cs_gpios, + ARRAY_SIZE(mxcs->cs_gpios), 0); + if (ret < 0) { + pr_err("Can't get %s gpios! Error: %d", bus->name, ret); + return ret; } - plat->base = devfdt_get_addr(bus); - if (plat->base == FDT_ADDR_T_NONE) - return -ENODEV; + for (i = 0; i < ARRAY_SIZE(mxcs->cs_gpios); i++) { + if (!dm_gpio_is_valid(&mxcs->cs_gpios[i])) + continue; - ret = dm_gpio_set_value(&plat->ss, 0); - if (ret) { - dev_err(bus, "Setting cs error\n"); - return ret; + ret = dm_gpio_set_dir_flags(&mxcs->cs_gpios[i], + GPIOD_IS_OUT | GPIOD_ACTIVE_LOW); + if (ret) { + dev_err(bus, "Setting cs %d error\n", i); + return ret; + } } + mxcs->base = devfdt_get_addr(bus); + if (mxcs->base == FDT_ADDR_T_NONE) + return -ENODEV; + mxcs->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 20000000); @@ -530,6 +557,8 @@ static int mxc_spi_claim_bus(struct udevice *dev) struct mxc_spi_slave *mxcs = dev_get_platdata(dev->parent); struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + mxcs->dev = dev; + return mxc_spi_claim_bus_internal(mxcs, slave_plat->cs); } diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h new file mode 100644 index 0000000000000000000000000000000000000000..be2c5a2293f1c78e1323e5e547df20047b070f49 --- /dev/null +++ b/include/configs/apalis-imx8.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 Toradex + */ + +#ifndef __APALIS_IMX8_H +#define __APALIS_IMX8_H + +#include +#include + +#define CONFIG_REMAKE_ELF + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#undef CONFIG_BOOTM_NETBSD + +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define USDHC1_BASE_ADDR 0x5b010000 +#define USDHC2_BASE_ADDR 0x5b020000 +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +/* Networking */ +#define FEC_QUIRK_ENET_MAC + +#define CONFIG_IP_DEFRAG +#define CONFIG_TFTP_BLOCKSIZE SZ_4K +#define CONFIG_TFTP_TSIZE + +#define CONFIG_IPADDR 192.168.10.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.10.1 + +#define MEM_LAYOUT_ENV_SETTINGS \ + "fdt_addr_r=0x84000000\0" \ + "kernel_addr_r=0x82000000\0" \ + "ramdisk_addr_r=0x94400000\0" \ + "scriptaddr=0x87000000\0" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) +#include +#undef BOOTENV_RUN_NET_USB_START +#define BOOTENV_RUN_NET_USB_START "" + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + MEM_LAYOUT_ENV_SETTINGS \ + "console=ttyLP1 earlycon\0" \ + "fdt_addr=0x83000000\0" \ + "fdt_file=fsl-imx8qm-apalis-eval.dtb\0" \ + "fdtfile=fsl-imx8qm-apalis-eval.dtb\0" \ + "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ + "image=Image\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=PARTUUID=${uuid} rootwait " \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ + "\0" \ + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \ + "apalis-imx8/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \ + "panel=NULL\0" \ + "script=boot.scr\0" \ + "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \ + "if test \"$confirm\" = \"y\"; then " \ + "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \ + "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \ + "${blkcnt}; fi\0" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x80280000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 + +#define CONFIG_SYS_MEMTEST_START 0x88000000 +#define CONFIG_SYS_MEMTEST_END 0x89000000 + +/* Environment in eMMC, before config block at the end of 1st "boot sector" */ +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ + CONFIG_TDX_CFG_BLOCK_OFFSET) +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 eMMC */ +#define CONFIG_SYS_MMC_ENV_PART 1 + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */ +#define CONFIG_SYS_FSL_USDHC_NUM 3 + +#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_2 0x880000000 +#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ +#define PHYS_SDRAM_2_SIZE SZ_2G /* 2 GB */ + +/* Serial */ +#define CONFIG_BAUDRATE 115200 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE SZ_2K +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +#endif /* __APALIS_IMX8_H */ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 9c8c8979f046fcaa0dc3d9f120da2698594e5946..490ca64b1007efe2001876204d036799733e1e3f 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -48,15 +48,22 @@ "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0" #define EMMC_BOOTCMD \ - "emmcargs=ip=off root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait\0" \ - "emmcboot=run setup; setenv bootargs ${defargs} ${emmcargs} " \ - "${setupargs} ${vidargs}; echo Booting from internal eMMC " \ - "chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ + "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \ + "ro rootfstype=ext4 rootwait\0" \ + "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ + "setenv bootargs ${defargs} ${emmcargs} " \ + "${setupargs} ${vidargs}; echo Booting from internal eMMC; " \ + "run emmcdtbload; " \ + "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ "bootm ${kernel_addr_r} - ${dtbparam}\0" \ - "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ - "${soc}-apalis-${fdt_board}.dtb && " \ - "setenv dtbparam ${fdt_addr_r}\0" + "emmcbootpart=1\0" \ + "emmcdev=0\0" \ + "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ + "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb && " \ + "setenv dtbparam ${fdt_addr_r}\0" \ + "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ + "emmcrootpart=2\0" #define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ @@ -69,26 +76,38 @@ "&& setenv dtbparam ${fdt_addr_r}\0" #define SD_BOOTCMD \ - "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \ - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ + "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \ + "rootfstype=ext4 rootwait\0" \ + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ + "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ "${vidargs}; echo Booting from SD card in 8bit slot...; " \ - "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ + "run sddtbload; load mmc ${sddev}:${sdbootpart} " \ + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ "bootm ${kernel_addr_r} - ${dtbparam}\0" \ - "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ - "${soc}-apalis-${fdt_board}.dtb " \ - "&& setenv dtbparam ${fdt_addr_r}\0" + "sdbootpart=1\0" \ + "sddev=1\0" \ + "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \ + "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \ + "&& setenv dtbparam ${fdt_addr_r}\0" \ + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ + "sdrootpart=2\0" #define USB_BOOTCMD \ - "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \ - "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ + "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro " \ + "rootfstype=ext4 rootwait\0" \ + "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \ + "setenv bootargs ${defargs} ${setupargs} " \ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ - "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ + "run usbdtbload; load usb ${usbdev}:${usbbootpart} " \ + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ "bootm ${kernel_addr_r} - ${dtbparam}\0" \ - "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ - "${soc}-apalis-${fdt_board}.dtb " \ - "&& setenv dtbparam ${fdt_addr_r}\0" + "usbbootpart=1\0" \ + "usbdev=0\0" \ + "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \ + "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \ + "&& setenv dtbparam ${fdt_addr_r}\0" \ + "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \ + "usbrootpart=2\0" #define BOARD_EXTRA_ENV_SETTINGS \ "boot_file=uImage\0" \ @@ -101,6 +120,7 @@ "fdt_fixup=;\0" \ NFS_BOOTCMD \ SD_BOOTCMD \ + USB_BOOTCMD \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \ diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 9d9e16e5d963d78c77493c99d17b576984d06b3a..54094e495a9612635fb60dcdfa10afdb0afa28b6 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -123,16 +123,21 @@ "imx6q-apalis-cam-eval.dtb fat 0 1" #define EMMC_BOOTCMD \ - "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext4 " \ - "rootwait\0" \ - "emmcboot=run setup; " \ + "set_emmcargs emmcargs ip=off root=PARTUUID=${uuid} ro,noatime " \ + "rootfstype=ext4 rootwait\0" \ + "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ "${vidargs}; echo Booting from internal eMMC chip...; " \ - "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ + "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \ + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ "bootz ${kernel_addr_r} ${dtbparam}\0" \ - "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ - "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" + "emmcbootpart=1\0" \ + "emmcdev=0\0" \ + "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ + "${fdt_addr_r} ${fdt_file} && " \ + "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \ + "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ + "emmcrootpart=2\0" #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x20000000\0" \ @@ -145,7 +150,7 @@ "scriptaddr=0x17000000\0" #define NFS_BOOTCMD \ - "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ + "nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \ "nfsboot=run setup; " \ "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ @@ -155,27 +160,43 @@ "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" #define SD_BOOTCMD \ - "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext4 " \ - "rootwait\0" \ - "sdboot=run setup; " \ + "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro,noatime " \ + "rootfstype=ext4 rootwait\0" \ + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ "${vidargs}; echo Booting from SD card; " \ - "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ + "run sddtbload; load mmc ${sddev}:${sdbootpart} " \ + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ "bootz ${kernel_addr_r} ${dtbparam}\0" \ - "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ - "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" + "sdbootpart=1\0" \ + "sddev=1\0" \ + "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \ + "${fdt_addr_r} " \ + "${fdt_file} && setenv dtbparam \" - " \ + "${fdt_addr_r}\" && true\0" \ + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ + "sdrootpart=2\0" + #define USB_BOOTCMD \ - "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext4 " \ - "rootwait\0" \ - "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ + "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro,noatime " \ + "rootfstype=ext4 rootwait\0" \ + "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \ + "setenv bootargs ${defargs} ${setupargs} " \ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ - "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ + "run usbdtbload; load usb " \ + "${usbdev}:${usbbootpart} ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ "bootz ${kernel_addr_r} ${dtbparam}\0" \ - "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ - "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" + "usbbootpart=1\0" \ + "usbdev=0\0" \ + "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} "\ + "${fdt_addr_r} " \ + "${fdt_file} && setenv dtbparam \" - " \ + "${fdt_addr_r}\" && true\0" \ + "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \ + "usbrootpart=2\0" + #ifndef CONFIG_TDX_APALIS_IMX6_V1_0 #define FDT_FILE "imx6q-apalis-eval.dtb" @@ -186,7 +207,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "run distro_bootcmd ; " \ + "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ @@ -199,6 +220,7 @@ MEM_LAYOUT_ENV_SETTINGS \ NFS_BOOTCMD \ SD_BOOTCMD \ + USB_BOOTCMD \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index fc39e807b6ad62994b6cd935cabc785c18080447..b221e118fa419ae2b9c7f15d5251facf18976a3f 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -62,12 +62,17 @@ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #define SD_BOOTCMD \ - "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \ - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ + "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \ + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ + "setenv bootargs ${defargs} ${sdargs} " \ "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ - "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ - "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \ + "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \ + "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " && " \ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "sdbootpart=1\0" \ + "sddev=0\0" \ + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ + "sdrootpart=2\0" #define UBI_BOOTCMD \ "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h new file mode 100644 index 0000000000000000000000000000000000000000..c6a38d5118d270ebfe23aecd4bba195de9edd385 --- /dev/null +++ b/include/configs/colibri-imx8x.h @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 Toradex + */ + +#ifndef __COLIBRI_IMX8X_H +#define __COLIBRI_IMX8X_H + +#include +#include + +#define CONFIG_REMAKE_ELF + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#undef CONFIG_BOOTM_NETBSD + +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define USDHC1_BASE_ADDR 0x5b010000 +#define USDHC2_BASE_ADDR 0x5b020000 +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +/* Networking */ +#define FEC_QUIRK_ENET_MAC + +#define CONFIG_IP_DEFRAG +#define CONFIG_TFTP_BLOCKSIZE SZ_4K +#define CONFIG_TFTP_TSIZE + +#define CONFIG_IPADDR 192.168.10.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.10.1 + +#define MEM_LAYOUT_ENV_SETTINGS \ + "fdt_addr_r=0x83000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "ramdisk_addr_r=0x83800000\0" \ + "scriptaddr=0x80800000\0" + +#ifdef CONFIG_AHAB_BOOT +#define AHAB_ENV "sec_boot=yes\0" +#else +#define AHAB_ENV "sec_boot=no\0" +#endif + +/* Boot M4 */ +#define M4_BOOT_ENV \ + "m4_0_image=m4_0.bin\0" \ + "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${m4_0_image}\0" \ + "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ + +#define MFG_NAND_PARTITION "" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) +#include +#undef BOOTENV_RUN_NET_USB_START +#define BOOTENV_RUN_NET_USB_START "" + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc g_mass_storage.stall=0 " \ + "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \ + "g_mass_storage.idProduct=0x37FF " \ + "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \ + "${vidargs} clk_ignore_unused\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \ + "${fdt_addr};\0" \ + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + AHAB_ENV \ + BOOTENV \ + CONFIG_MFG_ENV_SETTINGS \ + M4_BOOT_ENV \ + MEM_LAYOUT_ENV_SETTINGS \ + "console=ttyLP3 earlycon\0" \ + "fdt_addr=0x83000000\0" \ + "fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \ + "fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \ + "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ + "image=Image\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=PARTUUID=${uuid} rootwait " \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ + "${vidargs}\0" \ + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \ + "colibri-imx8x/${fdt_file}; booti ${loadaddr} - " \ + "${fdt_addr}\0" \ + "panel=NULL\0" \ + "script=boot.scr\0" \ + "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \ + "if test \"$confirm\" = \"y\"; then " \ + "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \ + "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \ + "${blkcnt}; fi\0" \ + "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x80280000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 + +#define CONFIG_SYS_MEMTEST_START 0x88000000 +#define CONFIG_SYS_MEMTEST_END 0x89000000 + +/* Environment in eMMC, before config block at the end of 1st "boot sector" */ +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ + CONFIG_TDX_CFG_BLOCK_OFFSET) +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 eMMC */ +#define CONFIG_SYS_MMC_ENV_PART 1 + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_2 0x880000000 +#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ + +/* Serial */ +#define CONFIG_BAUDRATE 115200 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE SZ_2K +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +#define BOOTAUX_RESERVED_MEM_BASE 0x88000000 +#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */ + +#endif /* __COLIBRI_IMX8X_H */ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index b540b3e0749fe704d979da382ac0e1e46388d702..1cdf83d82d3964ffbc32a4a20a2500aec013471a 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -190,7 +190,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "run distro_bootcmd ; " \ + "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index c3b353b2c27dfd231f37e7d789cb055a8ac1b8c3..545f506e97f75bc27c1b6a69f1c0eb56cf5e877a 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -49,14 +49,22 @@ #define CONFIG_SERVERIP 192.168.10.1 #define EMMC_BOOTCMD \ - "emmcargs=ip=off root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait\0" \ - "emmcboot=run setup; " \ + "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \ + "rootfstype=ext4 rootwait\0" \ + "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ "${vidargs}; echo Booting from internal eMMC chip...; " \ "run m4boot && " \ - "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-emmc-${fdt_board}.dtb && " \ - "load mmc 0:1 ${kernel_addr_r} ${boot_file} && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" + "load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \ + "${soc}-colibri-emmc-${fdt_board}.dtb && " \ + "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \ + "${boot_file} && run fdt_fixup && " \ + "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "emmcbootpart=1\0" \ + "emmcdev=0\0" \ + "emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \ + "emmcrootpart=2\0" + #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ @@ -67,24 +75,25 @@ "ramdisk_addr_r=0x82100000\0" #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) -#define SD_BOOTCMD \ - "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \ - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ - "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ - "run m4boot && " \ - "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ - "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" +#define SD_BOOTDEV 0 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) +#define SD_BOOTDEV 1 +#endif + #define SD_BOOTCMD \ - "sdargs=root=/dev/mmcblk1p2 ro rootwait\0" \ - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ + "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \ + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ + "setenv bootargs ${defargs} ${sdargs} " \ "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ "run m4boot && " \ - "load mmc 1:1 ${kernel_addr_r} ${kernel_file} && " \ - "load mmc 1:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" -#endif + "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \ + "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \ + "${soc}-colibri-${fdt_board}.dtb && " \ + "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "sdbootpart=1\0" \ + "sddev=" __stringify(SD_BOOTDEV) "\0" \ + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ + "sdrootpart=2\0" #define NFS_BOOTCMD \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 0d57e303a1bdfca6aa6f5fca6f51e9ee894d1e2f..da9a8426ecdd450b3cf747df2e9e521626993099 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -68,12 +68,19 @@ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #define SD_BOOTCMD \ - "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \ - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ + "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \ + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ + "setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ - "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ - "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ + "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \ + "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \ + "${soc}-colibri-${fdt_board}.dtb && " \ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "sdbootpart=1\0" \ + "sddev=0\0" \ + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ + "sdrootpart=2\0" + #define UBI_BOOTCMD \ "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 3eee382a6431cf8bab1df2aa2e99281a66def93a..3b1d0a99a19016dcb4f8bc5a7dd7048b2ef3d220 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -63,14 +63,14 @@ #define CONFIG_SYS_MMC_ENV_DEV 2 /* 1 = SDHC3, 2 = SDHC4 (eMMC) */ /* SATA Configs */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 -#endif /* SPI Flash Configs */ +#if defined(CONFIG_SPL_BUILD) +#undef CONFIG_DM_SPI +#undef CONFIG_DM_SPI_FLASH +#undef CONFIG_SPI_FLASH_MTD +#endif /* UART */ #define CONFIG_MXC_UART diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 571852d803ad0c8539b8d9008e16429583f6807c..56b3c7503eb6121dfcd7f2b63577c08da40810aa 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -43,30 +43,20 @@ "fdt_addr=" FDT_ADDR "\0" \ "boot_fdt=try\0" \ "mmcpart=1\0" \ - "recovery_device=0\0" \ - "recovery_part=2\0" \ - "recovery_root=/dev/mmcblk0p2 rootwait rw\0" \ "nandroot=ubi0:rootfs rootfstype=ubifs\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ - "recovery_mmcargs= setenv bootargs console=${console},${baudrate} "\ - "root=${recovery_root}\0" \ "ubiargs=setenv bootargs console=${console},${baudrate} " \ "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "recovery_loadimage=ext2load mmc ${recovery_device}:${recovery_part} ${loadaddr} ${image}\0" \ - "recovery_loadfdt=ext2load mmc ${recovery_device}:${recovery_part} ${fdt_addr} ${fdt_file}\0" \ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \ - "altbootcmd=run recovery_boot\0"\ - "recovery_boot=echo Recovery Boot from mmc ...; " \ - "run recovery_loadimage ; run recovery_loadfdt; run recovery_mmcargs; "\ - "bootm ${loadaddr} - ${fdt_addr}\0" \ + "altbootcmd=run recoveryboot\0"\ "fitboot=echo Booting FIT image from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -108,7 +98,12 @@ "run ubiargs; " \ "nand read ${loadaddr} kernel 0x800000; " \ "nand read ${fdt_addr} dtb 0x100000; " \ - "bootm ${loadaddr} - ${fdt_addr}\0" + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "recoveryboot=if test ${modeboot} = mmcboot; then " \ + "run mmcboot; " \ + "else " \ + "run nandboot; " \ + "fi\0" #define CONFIG_BOOTCOMMAND "run $modeboot" diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 2bdf3be65460cae08923eec82bd2179cd086d942..d06ed61c80775db79fcddd0c4b8b457d88afb627 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -155,15 +155,6 @@ /* Serial */ #define CONFIG_BAUDRATE 115200 -/* Monitor Command Prompt */ -#define CONFIG_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 261661a9782ddb3deead1ded5b606cfd775808f9..a8591c9256dd1770bac06177080d1be45d379476 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -154,14 +154,6 @@ /* Serial */ #define CONFIG_BAUDRATE 115200 -/* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */ diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index a252e9003de3acf23e5666678e81d6af0f6480d4..55bfa0fe591f8bd0e6cf8ef34b59d94db9f73fed 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -41,8 +41,10 @@ "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \ "upd_image=st.4k\0" \ "uboot_file=u-boot.imx\0" \ - "updargs=setenv bootargs console=${console} ${smp}"\ - "rdinit=${rdinit} ${debug} ${displayargs}\0" \ + "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \ + "initrd_ram_dev=/dev/ram\0" \ + "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \ + "addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \ "loadusb=usb start; " \ "fatload usb 0 ${loadaddr} ${upd_image}\0" \ "up=if tftp ${loadaddr} ${uboot_file}; then " \ @@ -59,6 +61,9 @@ "usbupd=echo Booting update from usb ...; " \ "setenv bootargs; " \ "run updargs; " \ + "run addinitrd; " \ + "run addswupdate; " \ + "run addkeys; " \ "run loadusb; " \ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 6b20c6db5803ab350dc3ee8b6b1281ba9aceb9ef..2b8ce9d71d007d1a6093e103eb3ae49874115fbd 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -59,7 +59,7 @@ /* Secure boot (HAB) support */ #ifdef CONFIG_SECURE_BOOT -#define CONFIG_CSF_SIZE 0x2000 +#define CONFIG_CSF_SIZE 0x4000 #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #endif diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index cc7e87269ee8d4bf5a90f5e3fef4907646505ebd..4f822ef9a072bf2023ab7202e0015aaefa486e6c 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -48,10 +48,21 @@ /* Secure boot (HAB) support */ #ifdef CONFIG_SECURE_BOOT -#define CONFIG_CSF_SIZE 0x2000 +#define CONFIG_CSF_SIZE 0x4000 #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #endif #endif +/* + * If we have defined the OPTEE ram size and not OPTEE it means that we were + * launched by OPTEE, because of that we shall skip all the low level + * initialization since it was already done by ATF or OPTEE + */ +#if (CONFIG_OPTEE_TZDRAM_SIZE != 0) +#ifndef CONFIG_OPTEE +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif +#endif + #endif diff --git a/include/configs/novena.h b/include/configs/novena.h index bb5bf808c2b013752114ba0516cf16905fd3bed1..cdc437c4925fa232324e308585d64aa3aff753ca 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -102,12 +102,7 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 /* SATA Configs */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 -#endif /* UART */ #define CONFIG_MXC_UART @@ -124,14 +119,12 @@ #endif /* Video output */ -#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP #define CONFIG_VIDEO_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#endif /* Extra U-Boot environment. */ #ifndef CONFIG_SPL_BUILD @@ -149,6 +142,8 @@ "ramdisk_addr_r=0x28000000\0" \ "fdt_addr_r=0x18000000\0" \ "fdtfile=imx6q-novena.dtb\0" \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" \ "addcons=" \ "setenv bootargs ${bootargs} " \ "console=${consdev},${baudrate}\0" \ diff --git a/include/configs/pcl063.h b/include/configs/pcl063.h index 12d8d67f0ff8032ca8346e0b61791f7da432467e..8fef250ac470bf1c2d73aea7d62a30428bf76a40 100644 --- a/include/configs/pcl063.h +++ b/include/configs/pcl063.h @@ -22,6 +22,8 @@ * Tweak the SPL text base address to avoid this. */ +#define CONFIG_SYS_FSL_USDHC_NUM 1 + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h new file mode 100644 index 0000000000000000000000000000000000000000..0f1a010b4e5b1647e5f8f6380c171fd5850c985d --- /dev/null +++ b/include/configs/pcl063_ull.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Board configuration file for Phytec phyBOARD-i.MX6ULL-Segin SBC + * Copyright (C) 2019 Parthiban Nallathambi + * + * Based on include/configs/xpress.h: + * Copyright (C) 2015-2016 Stefan Roese + */ +#ifndef __PCL063_ULL_H +#define __PCL063_ULL_H + +#include +#include "mx6_common.h" + +/* SPL options */ +#include "imx6_spl.h" + +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) + +/* Environment settings */ +#define CONFIG_ENV_SIZE (0x4000) +#define CONFIG_ENV_OFFSET (0x80000) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) + +/* Environment in SD */ +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 0 +#define MMC_ROOTFS_DEV 0 +#define MMC_ROOTFS_PART 2 + +/* Console configs */ +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* MMC Configs */ +#define CONFIG_FSL_USDHC + +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR +#define CONFIG_SUPPORT_EMMC_BOOT + +/* I2C configs */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE SZ_256M + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* NAND */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 + +/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_IMX_THERMAL + +#define ENV_MMC \ + "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \ + "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \ + "fitpart=1\0" \ + "bootdelay=3\0" \ + "silent=1\0" \ + "optargs=rw rootwait\0" \ + "mmcautodetect=yes\0" \ + "mmcrootfstype=ext4\0" \ + "mmcfit_name=fitImage\0" \ + "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \ + "${mmcfit_name}\0" \ + "mmcargs=setenv bootargs " \ + "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \ + "console=${console} rootfstype=${mmcrootfstype}\0" \ + "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \ + +/* Default environment */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "console=ttymxc0,115200n8\0" \ + "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ + "fit_addr=0x82000000\0" \ + ENV_MMC + +#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(DHCP, dhcp, na) + +#include + +#endif /* __PCL063_ULL_H */ diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index 365a5984e4d54268ca6cc9942eef6f14fca737b5..9a3b3b1e80b6d0ed424b2913bf05054a0e0c81a6 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -52,11 +52,29 @@ "/boot/imx7d-pico-pi.dtb ext4 0 1;" \ "rootfs part 0 1\0" \ -#define BOOTMENU_ENV \ +/* When booting with FIT specify the node entry containing boot.scr */ +#if defined(CONFIG_FIT) +#define PICO_BOOT_ENV \ + "bootscr_fitimage_name=bootscr\0" \ + "bootscriptaddr=0x83200000\0" \ + "fdtovaddr=0x83100000\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "rootwait rw;\0" \ + "loadbootscript=" \ + "load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${bootscriptaddr}:${bootscr_fitimage_name}\0" +#else +#define PICO_BOOT_ENV \ "bootmenu_0=Boot using PICO-Hobbit baseboard=" \ "setenv fdtfile imx7d-pico-hobbit.dtb\0" \ "bootmenu_1=Boot using PICO-Pi baseboard=" \ "setenv fdtfile imx7d-pico-pi.dtb\0" \ + BOOTENV +#endif + #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 @@ -69,7 +87,6 @@ "initrd_high=0xffffffff\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "videomode=video=ctfb:x:800,y:480,depth:24,mode:0,pclk:30000,le:46,ri:210,up:22,lo:23,hs:20,vs:10,sync:0,vmode:0\0" \ - BOOTMENU_ENV \ "fdt_addr=0x83000000\0" \ "fdt_addr_r=0x83000000\0" \ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ @@ -89,7 +106,22 @@ "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \ "fastboot_partition_alias_system=rootfs\0" \ "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ - BOOTENV + PICO_BOOT_ENV + +#if defined(CONFIG_FIT) +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "iminfo ${bootscriptaddr};" \ + "if test $? -eq 1; then hab_failsafe; fi;" \ + "run bootscript; " \ + "else " \ + "echo Fail to load fitImage with boot script;" \ + "hab_failsafe;" \ + "fi; " \ + "fi" +#endif #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index fd98c1417e7040ac36bb8dd5aa851c1dbf5f1822..d4db9b4a567187894e62ab3dcb567d6bf0183b15 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -17,9 +17,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 0ef8e3594804883169688d9cd1dfbe741be2e222..8ceaa0c6c604a3c35f3d5543c9def16fb522109a 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -13,17 +13,6 @@ #define PHYS_SDRAM_SIZE SZ_512M -/* - * If we have defined the OPTEE ram size and not OPTEE it means that we were - * launched by OPTEE, because of that we shall skip all the low level - * initialization since it was already done by ATF or OPTEE - */ -#ifdef CONFIG_OPTEE_TZDRAM_SIZE -#ifndef CONFIG_OPTEE -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif -#endif - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) diff --git a/include/power/bd71837.h b/include/power/bd71837.h new file mode 100644 index 0000000000000000000000000000000000000000..38c69b2b90985ba254749a738e6eefd188a07204 --- /dev/null +++ b/include/power/bd71837.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright (C) 2018 ROHM Semiconductors */ + +#ifndef BD71837_H_ +#define BD71837_H_ + +#define BD71837_REGULATOR_DRIVER "bd71837_regulator" + +enum { + BD71837_REV = 0x00, + BD71837_SWRESET = 0x01, + BD71837_I2C_DEV = 0x02, + BD71837_PWRCTRL0 = 0x03, + BD71837_PWRCTRL1 = 0x04, + BD71837_BUCK1_CTRL = 0x05, + BD71837_BUCK2_CTRL = 0x06, + BD71837_BUCK3_CTRL = 0x07, + BD71837_BUCK4_CTRL = 0x08, + BD71837_BUCK5_CTRL = 0x09, + BD71837_BUCK6_CTRL = 0x0a, + BD71837_BUCK7_CTRL = 0x0b, + BD71837_BUCK8_CTRL = 0x0c, + BD71837_BUCK1_VOLT_RUN = 0x0d, + BD71837_BUCK1_VOLT_IDLE = 0x0e, + BD71837_BUCK1_VOLT_SUSP = 0x0f, + BD71837_BUCK2_VOLT_RUN = 0x10, + BD71837_BUCK2_VOLT_IDLE = 0x11, + BD71837_BUCK3_VOLT_RUN = 0x12, + BD71837_BUCK4_VOLT_RUN = 0x13, + BD71837_BUCK5_VOLT = 0x14, + BD71837_BUCK6_VOLT = 0x15, + BD71837_BUCK7_VOLT = 0x16, + BD71837_BUCK8_VOLT = 0x17, + BD71837_LDO1_VOLT = 0x18, + BD71837_LDO2_VOLT = 0x19, + BD71837_LDO3_VOLT = 0x1a, + BD71837_LDO4_VOLT = 0x1b, + BD71837_LDO5_VOLT = 0x1c, + BD71837_LDO6_VOLT = 0x1d, + BD71837_LDO7_VOLT = 0x1e, + BD71837_TRANS_COND0 = 0x1f, + BD71837_TRANS_COND1 = 0x20, + BD71837_VRFAULTEN = 0x21, + BD71837_MVRFLTMASK0 = 0x22, + BD71837_MVRFLTMASK1 = 0x23, + BD71837_MVRFLTMASK2 = 0x24, + BD71837_RCVCFG = 0x25, + BD71837_RCVNUM = 0x26, + BD71837_PWRONCONFIG0 = 0x27, + BD71837_PWRONCONFIG1 = 0x28, + BD71837_RESETSRC = 0x29, + BD71837_MIRQ = 0x2a, + BD71837_IRQ = 0x2b, + BD71837_IN_MON = 0x2c, + BD71837_POW_STATE = 0x2d, + BD71837_OUT32K = 0x2e, + BD71837_REGLOCK = 0x2f, + BD71837_MUXSW_EN = 0x30, + BD71837_REG_NUM, +}; + +#endif