diff --git a/board/ep8248/ep8248.c b/board/ep8248/ep8248.c
index bc20ba739c2ee942bb8dac526530843b5751d8c1..57d39aa7e55f88788b2b14fd527c0c3ae04b4f7a 100644
--- a/board/ep8248/ep8248.c
+++ b/board/ep8248/ep8248.c
@@ -35,8 +35,8 @@
  * according to the five values podr/pdir/ppar/psor/pdat for that entry
  */
 
-#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
+#define CONFIG_SYS_FCC1 (CONFIG_ETHER_ON_FCC1 == 1)
+#define CONFIG_SYS_FCC2 (CONFIG_ETHER_ON_FCC2 == 1)
 
 const iop_conf_t iop_conf_tab[4][32] = {
 
@@ -261,3 +261,11 @@ int checkboard(void)
 
 	return 0;
 }
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup( blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
+
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index f7b3fdea88dd8536a0360eb16d17177a7b45ad4c..cb4185a67bbbbdc55b0942cd4f8eea256ffdfac9 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -50,50 +50,41 @@
 
 #define CONFIG_SYS_BCSR		0xFA000000
 
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
+/* Pass open firmware flat device tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_TBCLK        (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH  "/soc/cpm/serial <at> 11a80"
+
+/* Select ethernet configuration */
 #undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
 #define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
 #undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
 
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX	1	/* FCC1 is used for Ethernet */
-
-#if   (CONFIG_ETHER_INDEX == 1)
+#define CONFIG_NET_MULTI
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHER_ON_FCC1		1
 /* - Rx clock is CLK10
  * - Tx clock is CLK11
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#elif (CONFIG_ETHER_INDEX == 2)
+#define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
 
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETHER_ON_FCC2		1
 /* - Rx clock is CLK13
  * - Tx clock is CLK14
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_INDEX */
+#define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 
 #define CONFIG_MII			/* MII PHY management        */
 #define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
@@ -113,8 +104,6 @@
 
 #define MIIDELAY		udelay(1)
 
-#endif /* CONFIG_ETHER_ON_FCC */
-
 #ifndef CONFIG_8260_CLKIN
 #define CONFIG_8260_CLKIN	66000000	/* in Hz */
 #endif