diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile deleted file mode 100644 index 8aa513ac44fc002bf370612067a3ecd961854424..0000000000000000000000000000000000000000 --- a/board/lubbock/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := lubbock.o flash.o diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c deleted file mode 100644 index f6bb22c2e472ba561ba55be7cb478ba223d8e203..0000000000000000000000000000000000000000 --- a/board/lubbock/flash.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#define FLASH_PORT_WIDTH32 -#undef FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info); -static int write_data (flash_info_t *info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t *info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - case 1: - flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0] ); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] ); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - - switch (value) { - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x02000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int prot, sect; - ulong type, start; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW) 0x00B000B0; /* suspend erase */ - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = 0x00500050; /* clear status register cmd. */ - *addr = 0x00FF00FF; /* resest to read mode */ - - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t *info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c deleted file mode 100644 index 0daff9abf148a0e556b82e3160c111611136c79f..0000000000000000000000000000000000000000 --- a/board/lubbock/lubbock.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of Lubbock-Board */ - gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Configure GPIO6 and GPIO8 as OUT, AF1. */ - setbits_le32(GPDR0, (1 << 6) | (1 << 8)); - clrsetbits_le32(GAFR0_L, (3 << 12) | (3 << 16), (1 << 12) | (1 << 16)); - - return 0; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -int board_late_init(void) -{ - setenv("stdout", "serial"); - setenv("stderr", "serial"); - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index 6dd9e7513a03d4e329abf1f4543ee74f3d73ab9a..c83aff3b141938a2c5f5e744af742414f03c0c1b 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1241,4 +1241,3 @@ Orphan powerpc ppc4xx - sandburst metrobox # The following were move to "Orphan" in September, 2013 Orphan arm arm1136 mx31 - imx31_phycore imx31_phycore_eet imx31_phycore:IMX31_PHYCORE_EET (resigned) Guennadi Liakhovetski Orphan arm arm1136 mx31 freescale - mx31ads - (resigned) Guennadi Liakhovetski -Orphan arm pxa - - - lubbock - (dead address) Kyle Harris diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 0e4d329ed18ed37f484f1f6902ea1ea816d4467c..15c39e767582de2d0372420b58ed898ae4a1c4c2 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +lubbock arm pxa - 2014-04-04 Kyle Harris MOUSSE powerpc mpc824x - 2014-04-04 rsdproto powerpc mpc8260 - 2014-04-04 RPXsuper powerpc mpc8260 - 2014-04-04 diff --git a/drivers/net/lan91c96.h b/drivers/net/lan91c96.h index 2f0d640adec80a6754c7948accab8bfd1b25315b..3e914ce5ad5d56f9d47cbd609da820e4db03b29a 100644 --- a/drivers/net/lan91c96.h +++ b/drivers/net/lan91c96.h @@ -58,13 +58,7 @@ typedef unsigned long int dword; #ifdef CONFIG_CPU_PXA25X -#ifdef CONFIG_LUBBOCK -#define SMC_IO_SHIFT 2 -#undef USE_32_BIT - -#else #define SMC_IO_SHIFT 0 -#endif #define SMCREG(edev, r) ((edev)->iobase+((r)< - * Marius Groeger - * - * Configuation settings for the LUBBOCK board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */ -#define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */ -#define CONFIG_LCD 1 -#ifdef CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_SHARP_LM8V31 -#endif -#define CONFIG_MMC -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE 0x0C000000 - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ -#define CONFIG_CONS_INDEX 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_FAT - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 80000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG -#define CONFIG_TIMESTAMP - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - -#ifdef CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -#define FPGA_REGS_BASE_PHYSICAL 0x08000000 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x00008000 -#define CONFIG_SYS_GPSR1_VAL 0x00FC0382 -#define CONFIG_SYS_GPSR2_VAL 0x0001FFFF -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0x0060A800 -#define CONFIG_SYS_GPDR1_VAL 0x00FF0382 -#define CONFIG_SYS_GPDR2_VAL 0x0001C000 -#define CONFIG_SYS_GAFR0_L_VAL 0x98400000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00002950 -#define CONFIG_SYS_GAFR1_L_VAL 0x000A9558 -#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x23F223F2 -#define CONFIG_SYS_MSC1_VAL 0x3FF1A441 -#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1 -#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9 -#define CONFIG_SYS_MDREFR_VAL 0x00018018 -#define CONFIG_SYS_MDMRS_VAL 0x00000000 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -#define _LED 0x08000010 -#define LED_BLANK 0x08000040 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* NOTE: many default partitioning schemes assume the kernel starts at the - * second sector, not an environment. You have been warned! - */ -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE -#define CONFIG_ENV_SIZE (PHYS_FLASH_SECT_SIZE / 16) - - -/* - * FPGA Offsets - */ -#define WHOAMI_OFFSET 0x00 -#define HEXLED_OFFSET 0x10 -#define BLANKLED_OFFSET 0x40 -#define DISCRETELED_OFFSET 0x40 -#define CNFG_SWITCHES_OFFSET 0x50 -#define USER_SWITCHES_OFFSET 0x60 -#define MISC_WR_OFFSET 0x80 -#define MISC_RD_OFFSET 0x90 -#define INT_MASK_OFFSET 0xC0 -#define INT_CLEAR_OFFSET 0xD0 -#define GP_OFFSET 0x100 - -#endif /* __CONFIG_H */