Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 35343a26 编写于 作者: M Masahiro Yamada
浏览文件
操作

ARM: dts: uniphier: sync clock/reset controller nodes with Linux 

Sync device trees with Linux for easier DT life.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
上级 6dc5b6b1
显示空白变更内容
内联 并排
Showing with 301 addition and 181 deletion
arch/arm/dts/uniphier-common32.dtsi
浏览文件 @ 35343a26
......@@ -31,7 +31,7 @@
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart_clk>;
clocks = <&peri_clk 0>;
};
serial1: serial@54006900 {
......@@ -41,7 +41,7 @@
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart_clk>;
clocks = <&peri_clk 1>;
};
serial2: serial@54006a00 {
......@@ -51,7 +51,7 @@
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&uart_clk>;
clocks = <&peri_clk 2>;
};
serial3: serial@54006b00 {
......@@ -61,7 +61,7 @@
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&uart_clk>;
clocks = <&peri_clk 3>;
};
system_bus: system-bus@58c00000 {
......@@ -79,18 +79,35 @@
reg = <0x59801000 0x400>;
};
mio: mioctrl@59810000 {
/* specify compatible in each SoC DTSI */
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
u-boot,dm-pre-reloc;
mio_clk: clock {
#clock-cells = <1>;
};
peri: perictrl@59820000 {
/* specify compatible in each SoC DTSI */
mio_rst: reset {
#reset-cells = <1>;
};
};
perictrl@59820000 {
compatible = "socionext,uniphier-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
#clock-cells = <1>;
};
peri_rst: reset {
#reset-cells = <1>;
};
};
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
......@@ -114,7 +131,8 @@
};
soc-glue@5f800000 {
compatible = "simple-mfd", "syscon";
compatible = "socionext,uniphier-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
......@@ -124,12 +142,18 @@
};
};
sysctrl: sysctrl@61840000 {
/* specify compatible in each SoC DTSI */
sysctrl@61840000 {
compatible = "socionext,uniphier-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
sys_clk: clock {
#clock-cells = <1>;
clock-names = "ref";
clocks = <&refclk>;
};
sys_rst: reset {
#reset-cells = <1>;
};
};
nand: nand@68000000 {
......
arch/arm/dts/uniphier-ph1-ld11.dtsi
浏览文件 @ 35343a26
......@@ -54,12 +54,6 @@
clock-frequency = <25000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <58820000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -69,10 +63,10 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf01>,
<1 14 0xf01>,
<1 11 0xf01>,
<1 10 0xf01>;
interrupts = <1 13 4>,
<1 14 4>,
<1 11 4>,
<1 10 4>;
};
soc {
......@@ -89,7 +83,7 @@
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart_clk>;
clocks = <&peri_clk 0>;
clock-frequency = <58820000>;
};
......@@ -100,7 +94,7 @@
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart_clk>;
clocks = <&peri_clk 1>;
clock-frequency = <58820000>;
};
......@@ -111,7 +105,7 @@
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&uart_clk>;
clocks = <&peri_clk 2>;
clock-frequency = <58820000>;
};
......@@ -122,7 +116,7 @@
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&uart_clk>;
clocks = <&peri_clk 3>;
clock-frequency = <58820000>;
};
......@@ -213,6 +207,22 @@
reg = <0x59801000 0x400>;
};
perictrl@59820000 {
compatible = "socionext,uniphier-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
compatible = "socionext,uniphier-ld11-peri-clock";
#clock-cells = <1>;
};
peri_rst: reset {
compatible = "socionext,uniphier-ld11-peri-reset";
#reset-cells = <1>;
};
};
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
......@@ -220,7 +230,7 @@
interrupts = <0 243 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio 3>, <&mio 6>;
clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
......@@ -230,7 +240,7 @@
interrupts = <0 244 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio 4>, <&mio 6>;
clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
......@@ -240,17 +250,29 @@
interrupts = <0 245 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio 5>, <&mio 6>;
clocks = <&mio_clk 5>, <&mio_clk 6>;
};
mio: mioctrl@5b3e0000 {
compatible = "socionext,ph1-ld11-mioctrl";
mioctrl@5b3e0000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x5b3e0000 0x800>;
mio_clk: clock {
compatible = "socionext,uniphier-ld11-mio-clock";
#clock-cells = <1>;
};
mio_rst: reset {
compatible = "socionext,uniphier-ld11-mio-reset";
#reset-cells = <1>;
resets = <&sys_rst 7>;
};
};
soc-glue@5f800000 {
compatible = "simple-mfd", "syscon";
compatible = "socionext,uniphier-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
......@@ -273,6 +295,22 @@
#interrupt-cells = <3>;
interrupts = <1 9 4>;
};
sysctrl@61840000 {
compatible = "socionext,uniphier-ld11-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
sys_clk: clock {
compatible = "socionext,uniphier-ld11-clock";
#clock-cells = <1>;
};
sys_rst: reset {
compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
};
};
};
......
arch/arm/dts/uniphier-ph1-ld20.dtsi
浏览文件 @ 35343a26
......@@ -78,12 +78,6 @@
clock-frequency = <25000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <58820000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -93,10 +87,10 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf01>,
<1 14 0xf01>,
<1 11 0xf01>,
<1 10 0xf01>;
interrupts = <1 13 4>,
<1 14 4>,
<1 11 4>,
<1 10 4>;
};
soc {
......@@ -113,7 +107,7 @@
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart_clk>;
clocks = <&peri_clk 0>;
clock-frequency = <58820000>;
};
......@@ -124,7 +118,7 @@
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart_clk>;
clocks = <&peri_clk 1>;
clock-frequency = <58820000>;
};
......@@ -135,7 +129,7 @@
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&uart_clk>;
clocks = <&peri_clk 2>;
clock-frequency = <58820000>;
};
......@@ -146,7 +140,7 @@
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&uart_clk>;
clocks = <&peri_clk 3>;
clock-frequency = <58820000>;
};
......@@ -237,12 +231,38 @@
reg = <0x59801000 0x400>;
};
mio: mioctrl@59810000 {
compatible = "socionext,ph1-ld20-mioctrl";
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
mio_clk: clock {
compatible = "socionext,uniphier-ld20-mio-clock";
#clock-cells = <1>;
};
mio_rst: reset {
compatible = "socionext,uniphier-ld20-mio-reset";
#reset-cells = <1>;
};
};
perictrl@59820000 {
compatible = "socionext,uniphier-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
compatible = "socionext,uniphier-ld20-peri-clock";
#clock-cells = <1>;
};
peri_rst: reset {
compatible = "socionext,uniphier-ld20-peri-reset";
#reset-cells = <1>;
};
};
sd: sdhc@5a400000 {
compatible = "socionext,uniphier-sdhc";
status = "disabled";
......@@ -250,12 +270,13 @@
interrupts = <0 76 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd>;
clocks = <&mio 0>;
clocks = <&mio_clk 0>;
bus-width = <4>;
};
soc-glue@5f800000 {
compatible = "simple-mfd", "syscon";
compatible = "socionext,uniphier-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
......@@ -278,6 +299,22 @@
#interrupt-cells = <3>;
interrupts = <1 9 4>;
};
sysctrl@61840000 {
compatible = "socionext,uniphier-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
sys_clk: clock {
compatible = "socionext,uniphier-ld20-clock";
#clock-cells = <1>;
};
sys_rst: reset {
compatible = "socionext,uniphier-ld20-reset";
#reset-cells = <1>;
};
};
};
};
......
arch/arm/dts/uniphier-ph1-ld4.dtsi
浏览文件 @ 35343a26
......@@ -30,12 +30,6 @@
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <36864000>;
};
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -228,7 +222,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
clocks = <&mio 0>;
clocks = <&mio_clk 0>;
bus-width = <4>;
};
......@@ -240,7 +234,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
clocks = <&mio 1>;
clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
......@@ -252,7 +246,7 @@
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio 3>, <&mio 6>;
clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
......@@ -262,7 +256,7 @@
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio 4>, <&mio 6>;
clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
......@@ -272,7 +266,7 @@
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio 5>, <&mio 6>;
clocks = <&mio_clk 5>, <&mio_clk 6>;
};
aidet@61830000 {
......@@ -302,22 +296,30 @@
clock-frequency = <36864000>;
};
&mio {
compatible = "socionext,ph1-ld4-mioctrl";
clock-names = "stdmac", "ehci";
clocks = <&sysctrl 10>, <&sysctrl 18>;
&mio_clk {
compatible = "socionext,uniphier-ld4-mio-clock";
};
&peri {
compatible = "socionext,ph1-ld4-perictrl";
clock-names = "uart", "i2c";
clocks = <&sysctrl 3>, <&sysctrl 4>;
&mio_rst {
compatible = "socionext,uniphier-ld4-mio-reset";
};
&peri_clk {
compatible = "socionext,uniphier-ld4-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-ld4-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-ld4-pinctrl";
};
&sysctrl {
compatible = "socionext,ph1-ld4-sysctrl";
&sys_clk {
compatible = "socionext,uniphier-ld4-clock";
};
&sys_rst {
compatible = "socionext,uniphier-ld4-reset";
};
arch/arm/dts/uniphier-ph1-pro4-sanji.dts
浏览文件 @ 35343a26
......@@ -89,7 +89,7 @@
u-boot,dm-pre-reloc;
};
&mio {
&mio_clk {
u-boot,dm-pre-reloc;
};
......
arch/arm/dts/uniphier-ph1-pro4.dtsi
浏览文件 @ 35343a26
......@@ -351,7 +351,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
clocks = <&mio 0>;
clocks = <&mio_clk 0>;
bus-width = <4>;
};
......@@ -363,7 +363,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
clocks = <&mio 1>;
clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
......@@ -376,7 +376,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd1>;
pinctrl-1 = <&pinctrl_sd1_1v8>;
clocks = <&mio 2>;
clocks = <&mio_clk 2>;
bus-width = <4>;
};
......@@ -387,7 +387,7 @@
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio 3>, <&mio 6>;
clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb3: usb@5a810100 {
......@@ -397,7 +397,7 @@
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
clocks = <&mio 4>, <&mio 6>;
clocks = <&mio_clk 4>, <&mio_clk 6>;
};
aidet@5fc20000 {
......@@ -444,22 +444,30 @@
clock-frequency = <73728000>;
};
&mio {
compatible = "socionext,ph1-pro4-mioctrl";
clock-names = "stdmac", "ehci";
clocks = <&sysctrl 10>, <&sysctrl 18>;
&mio_clk {
compatible = "socionext,uniphier-pro4-mio-clock";
};
&peri {
compatible = "socionext,ph1-pro4-perictrl";
clock-names = "uart", "fi2c";
clocks = <&sysctrl 3>, <&sysctrl 4>;
&mio_rst {
compatible = "socionext,uniphier-pro4-mio-reset";
};
&peri_clk {
compatible = "socionext,uniphier-pro4-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-pro4-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
&sysctrl {
compatible = "socionext,ph1-pro4-sysctrl";
&sys_clk {
compatible = "socionext,uniphier-pro4-clock";
};
&sys_rst {
compatible = "socionext,uniphier-pro4-reset";
};
arch/arm/dts/uniphier-ph1-pro5.dtsi
浏览文件 @ 35343a26
......@@ -38,12 +38,6 @@
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <73728000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -367,7 +361,7 @@
interrupts = <0 78 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&mio 1>;
clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
......@@ -380,7 +374,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
clocks = <&mio 0>;
clocks = <&mio_clk 0>;
bus-width = <4>;
};
......@@ -423,22 +417,30 @@
clock-frequency = <73728000>;
};
&mio {
compatible = "socionext,ph1-pro5-mioctrl";
clock-names = "stdmac";
clocks = <&sysctrl 10>;
&mio_clk {
compatible = "socionext,uniphier-pro5-mio-clock";
};
&peri {
compatible = "socionext,ph1-pro5-perictrl";
clock-names = "uart", "fi2c";
clocks = <&sysctrl 3>, <&sysctrl 4>;
&mio_rst {
compatible = "socionext,uniphier-pro5-mio-reset";
};
&peri_clk {
compatible = "socionext,uniphier-pro5-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-pro5-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pro5-pinctrl";
};
&sysctrl {
compatible = "socionext,ph1-pro5-sysctrl";
&sys_clk {
compatible = "socionext,uniphier-pro5-clock";
};
&sys_rst {
compatible = "socionext,uniphier-pro5-reset";
};
arch/arm/dts/uniphier-ph1-sld3-ref.dts
浏览文件 @ 35343a26
......@@ -86,10 +86,6 @@
u-boot,dm-pre-reloc;
};
&mio {
u-boot,dm-pre-reloc;
};
&emmc {
u-boot,dm-pre-reloc;
};
......
arch/arm/dts/uniphier-ph1-sld3.dtsi
浏览文件 @ 35343a26
......@@ -42,12 +42,6 @@
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <36864000>;
};
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -92,7 +86,6 @@
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart_clk>;
clock-frequency = <36864000>;
};
......@@ -103,7 +96,6 @@
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart_clk>;
clock-frequency = <36864000>;
};
......@@ -114,7 +106,6 @@
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&uart_clk>;
clock-frequency = <36864000>;
};
......@@ -299,12 +290,22 @@
reg = <0x59801000 0x400>;
};
mio: mioctrl@59810000 {
compatible = "socionext,ph1-sld3-mioctrl";
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
u-boot,dm-pre-reloc;
mio_clk: clock {
compatible = "socionext,uniphier-sld3-mio-clock";
#clock-cells = <1>;
clock-names = "stdmac", "ehci";
clocks = <&sysctrl 10>, <&sysctrl 18>;
u-boot,dm-pre-reloc;
};
mio_rst: reset {
compatible = "socionext,uniphier-sld3-mio-reset";
#reset-cells = <1>;
};
};
emmc: sdhc@5a400000 {
......@@ -315,7 +316,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
clocks = <&mio 1>;
clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
......@@ -328,7 +329,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
clocks = <&mio 0>;
clocks = <&mio_clk 0>;
bus-width = <4>;
};
......@@ -339,7 +340,7 @@
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio 3>, <&mio 6>;
clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
......@@ -349,7 +350,7 @@
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio 4>, <&mio 6>;
clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
......@@ -359,7 +360,7 @@
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio 5>, <&mio 6>;
clocks = <&mio_clk 5>, <&mio_clk 6>;
};
usb3: usb@5a830100 {
......@@ -369,7 +370,7 @@
interrupts = <0 83 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
clocks = <&mio 7>, <&mio 6>;
clocks = <&mio_clk 7>, <&mio_clk 6>;
};
soc-glue@5f800000 {
......@@ -388,12 +389,20 @@
reg = <0xf1830000 0x200>;
};
sysctrl: sysctrl@f1840000 {
compatible = "socionext,ph1-sld3-sysctrl";
sysctrl@f1840000 {
compatible = "socionext,uniphier-sysctrl",
"simple-mfd", "syscon";
reg = <0xf1840000 0x4000>;
sys_clk: clock {
compatible = "socionext,uniphier-sld3-clock";
#clock-cells = <1>;
clock-names = "ref";
clocks = <&refclk>;
};
sys_rst: reset {
compatible = "socionext,uniphier-sld3-reset";
#reset-cells = <1>;
};
};
nand: nand@f8000000 {
......
arch/arm/dts/uniphier-ph1-sld8.dtsi
浏览文件 @ 35343a26
......@@ -30,12 +30,6 @@
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <80000000>;
};
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -228,7 +222,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
clocks = <&mio 0>;
clocks = <&mio_clk 0>;
bus-width = <4>;
};
......@@ -240,7 +234,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
clocks = <&mio 1>;
clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
......@@ -252,7 +246,7 @@
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio 3>, <&mio 6>;
clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
......@@ -262,7 +256,7 @@
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio 4>, <&mio 6>;
clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
......@@ -272,7 +266,7 @@
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio 5>, <&mio 6>;
clocks = <&mio_clk 5>, <&mio_clk 6>;
};
aidet@61830000 {
......@@ -302,22 +296,30 @@
clock-frequency = <80000000>;
};
&mio {
compatible = "socionext,ph1-sld8-mioctrl";
clock-names = "stdmac", "ehci";
clocks = <&sysctrl 10>, <&sysctrl 18>;
&mio_clk {
compatible = "socionext,uniphier-sld8-mio-clock";
};
&peri {
compatible = "socionext,ph1-sld8-perictrl";
clock-names = "uart", "i2c";
clocks = <&sysctrl 3>, <&sysctrl 4>;
&mio_rst {
compatible = "socionext,uniphier-sld8-mio-reset";
};
&peri_clk {
compatible = "socionext,uniphier-sld8-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-sld8-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-sld8-pinctrl";
};
&sysctrl {
compatible = "socionext,ph1-sld8-sysctrl";
&sys_clk {
compatible = "socionext,uniphier-sld8-clock";
};
&sys_rst {
compatible = "socionext,uniphier-sld8-reset";
};
arch/arm/dts/uniphier-proxstream2-gentil.dts
浏览文件 @ 35343a26
......@@ -69,7 +69,7 @@
u-boot,dm-pre-reloc;
};
&mio {
&mio_clk {
u-boot,dm-pre-reloc;
};
......
arch/arm/dts/uniphier-proxstream2-vodka.dts
浏览文件 @ 35343a26
......@@ -54,7 +54,7 @@
u-boot,dm-pre-reloc;
};
&mio {
&mio_clk {
u-boot,dm-pre-reloc;
};
......
arch/arm/dts/uniphier-proxstream2.dtsi
浏览文件 @ 35343a26
......@@ -52,12 +52,6 @@
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <88900000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -366,7 +360,7 @@
interrupts = <0 78 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&mio 1>;
clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
......@@ -379,7 +373,7 @@
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
clocks = <&mio 0>;
clocks = <&mio_clk 0>;
bus-width = <4>;
};
......@@ -427,22 +421,30 @@
clock-frequency = <88900000>;
};
&mio {
compatible = "socionext,proxstream2-mioctrl";
clock-names = "stdmac";
clocks = <&sysctrl 10>;
&mio_clk {
compatible = "socionext,uniphier-pxs2-mio-clock";
};
&peri {
compatible = "socionext,proxstream2-perictrl";
clock-names = "uart", "fi2c";
clocks = <&sysctrl 3>, <&sysctrl 4>;
&mio_rst {
compatible = "socionext,uniphier-pxs2-mio-reset";
};
&peri_clk {
compatible = "socionext,uniphier-pxs2-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-pxs2-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pxs2-pinctrl";
};
&sysctrl {
compatible = "socionext,proxstream2-sysctrl";
&sys_clk {
compatible = "socionext,uniphier-pxs2-clock";
};
&sys_rst {
compatible = "socionext,uniphier-pxs2-reset";
};
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或