arm: dts: stm32mp15: alignment with v5.14

Device tree alignment with Linux kernel v5.14-rc3
- ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
- ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
- ARM: dts: stm32: add a new DCMI pins group on stm32mp15
- ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>

arch/arm/dts/stm32mp15-pinctrl.dtsi

@@ -118,6 +118,39 @@
 		};
 	};
 
+	dcmi_pins_b: dcmi-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  AF13)>;/* DCMI_D7 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_b: dcmi-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  ANALOG)>;/* DCMI_D7 */
+		};
+	};
+
 	ethernet0_rgmii_pins_a: rgmii-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */

arch/arm/dts/stm32mp151.dtsi

@@ -1399,8 +1399,8 @@
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
-			       <&mdma1 22 0x2 0x100008 0x0 0x0>;
+			dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+			       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
 			dma-names = "tx", "rx";
 			clocks = <&rcc QSPI_K>;
 			resets = <&rcc QSPI_R>;
@@ -1446,12 +1446,6 @@
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1477,6 +1471,12 @@
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usb@5800c000 {

arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts

@@ -89,7 +89,7 @@
 };
 
 &pinctrl {
-	ltdc_pins: ltdc {
+	ltdc_pins: ltdc-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 10, AF14)>,	/* LTDC_B2 */
 				 <STM32_PINMUX('H', 12, AF14)>,	/* LTDC_R6 */